summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-02-19 14:35:42 +0900
committerMathias Kresin <dev@kresin.me>2018-02-20 19:25:17 +0100
commite1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1 (patch)
tree2fd98f4c6d9cd592358ecb050006a41761c3f331 /target/linux/ramips/base-files/etc
parentcb741654e5b9b659ffc7cb5c1e1fa362aa8c4652 (diff)
downloadmtk-20170518-e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1.zip
mtk-20170518-e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1.tar.gz
mtk-20170518-e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1.tar.bz2
ramips: add support for Tama W06
Tama Electric Axing W06 is a 2.4 GHz band 11n router, based on Mediatek MT7688AN. Specification: - MT7688AN (575 MHz) - 64 MB of RAM (DDR2 SDRAM) - 16 MB of Flash (SPI) - 1T1R 2.4 GHz - 1x 10/100/1000 Mbps Ethernet - 4x LEDs (GPIO connected: 3), 1x button - 1x USB 2.0 Type-A (host) - UART header on PCB (GND, RX, TX, Vcc from RJ45 side) Flash instruction using sysupgrade image: 1. Connect micro-USB cable for power supply into W06 and turn on the router 2. Connect to wifi with SSID "tama-*" with password. Complete SSID and password are listed on the back of the router 3. Access to 192.168.1.1 and login with user name "admin" and password empty 4. In firmware update(ファームウェア更新) page, click "参照" button and click "ブラウザー" button to open file browser, select the sysupgrade image and press OK button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 16d38dd..515656f 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -362,6 +362,10 @@ rt-n14u)
set_wifi_led "$boardname:blue:air"
set_usb_led "$boardname:blue:usb"
;;
+tama,w06)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+ ;;
tew-714tru)
set_usb_led "$boardname:red:usb"
set_wifi_led "$boardname:green:wifi"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 946810b..fe19a22 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -248,6 +248,7 @@ ramips_setup_interfaces()
mzk-ex750np|\
na930|\
pbr-d1|\
+ tama,w06|\
u25awf-h1|\
wli-tx4-ag300n|\
wmdr-143n|\