diff options
author | Andrew Yong <me@ndoo.sg> | 2017-01-08 14:30:10 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2017-01-13 08:32:35 +0100 |
commit | 3f31029b190417e12f4d19d9999cd52ec76d0f85 (patch) | |
tree | 93a92ab8ccc6b8e55af209e4c86788f47046e7bf /target/linux/ramips/base-files/lib/upgrade/platform.sh | |
parent | d7fd1a0f8da37a978b138b2966c12d06bda55df5 (diff) | |
download | mtk-20170518-3f31029b190417e12f4d19d9999cd52ec76d0f85.zip mtk-20170518-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.gz mtk-20170518-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.bz2 |
ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary
"ultimate" dock.
Specifications:
- SoC: MediaTek MT7628AN (580MHz, ramips)
- RAM: 128MB DDR2 166MHz
- Storage: 16MB NOR SPI flash onboard + microSD slot on dock
- Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
boards with onboard 1x chip antenna
- Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
- Dock hardware:
- USB 2.0 socket
- MicroSD socket
- 100Mbps Ethernet x1
- 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
DAC/ADC (support WIP)
- Micro USB for power and console (UART2)
Initial installation:
- VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
SSID "VoCore2"
- Connect to VoCore2 by Ethernet or Wi-Fi
- `ssh root@192.168.1.1` (password is "vocore")
- scp/wget/etc. LEDE sysupgrade.bin to VoCore2
- `sysupgrade -n <your image>.bin` (don't keep old config, as the
original firmware uses Ralink SDK Wi-Fi drivers and not
mt76+mac80211)
- after sysupgrade completes, Wi-Fi will be disabled by default so use
Ethernet or the micro USB console to configure Wi-Fi again
Signed-off-by: Andrew Yong <me@ndoo.sg>
Diffstat (limited to 'target/linux/ramips/base-files/lib/upgrade/platform.sh')
-rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index c097cfa..ce2c222 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -133,6 +133,7 @@ platform_check_image() { ur-336un|\ v22rw-2x2|\ vocore|\ + vocore2|\ vr500|\ w150m|\ w2914nsv2|\ |