summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/lib/upgrade
diff options
context:
space:
mode:
authorAlex Maclean <monkeh@monkeh.net>2017-07-23 20:06:44 +0100
committerMathias Kresin <dev@kresin.me>2017-07-25 21:02:53 +0200
commitf683385e73f09c13fd08c3d352f3f1739c1944c4 (patch)
treed5a10f6a8d7fbfa6a6639b9a202a88c6cc7616eb /target/linux/ramips/base-files/lib/upgrade
parent1c7144f078c98dbf0e6c70c534b98fe6186f19d6 (diff)
downloadmtk-20170518-f683385e73f09c13fd08c3d352f3f1739c1944c4.zip
mtk-20170518-f683385e73f09c13fd08c3d352f3f1739c1944c4.tar.gz
mtk-20170518-f683385e73f09c13fd08c3d352f3f1739c1944c4.tar.bz2
ramips: add support for TP-Link RE350
The TP-Link RE350 is a wall-wart AC1200 range extender/access point with a single gigabit ethernet port and two non-detachable antennas, based on the MT7621A SoC with MT7603E and MT7612E radios. Firmware wise it is very similar to the QCA based RE450. SoC: MediaTek MT7621A (880MHz) Flash: 8MiB (Winbond W25Q64) RAM: 64MiB (DDR2) Ethernet: 1x 1Gbit Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E) LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act (green) Buttons: On/off, LED, reset, WPS Serial header at J1, 57600 8n1: Pin 1 TX Pin 2 RX Pin 3 GND Pin 4 3.3V Factory image can be uploaded directly through the stock UI. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Diffstat (limited to 'target/linux/ramips/base-files/lib/upgrade')
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh7
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 36469ca..830e129 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -253,6 +253,13 @@ platform_check_image() {
# these boards use metadata images
return 0
;;
+ re350-v1)
+ [ "$magic" != "01000000" ] && {
+ echo "Invalid image type."
+ return 1
+ }
+ return 0
+ ;;
ubnt-erx|\
ubnt-erx-sfp)
nand_do_platform_check "$board" "$1"