diff options
| author | Kyson Lok <kysonlok@gmail.com> | 2017-05-17 18:18:45 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-05-26 08:04:15 +0200 |
| commit | abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a (patch) | |
| tree | 005f2cb004e90efa6868b0c736edcfea265a5f92 /target/linux/ramips/base-files/lib | |
| parent | da472e5b30f63b7f214b1d646ef0d955cbf3f295 (diff) | |
| download | mtk-20170518-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.zip mtk-20170518-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.tar.gz mtk-20170518-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.tar.bz2 | |
ramips: add support for GL-inet GL-MT300N-V2
This patch adds supports for the GL-inet GL-MT300N-V2.
Specification:
- SoC: MediaTek MT7628AN
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR
- Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps)
- USB: 1 x USB 2.0 port
- Button: 1 x switch button, 1 x reset button
- LED: 3 x LEDS (system power led is not GPIO controller)
- UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND)
Installation through Luci:
- The original firmware is LEDE, so both LuCI or sysupgrade can be used.
- Do not keep settings, for sysupgrade please use the -n option.
Installation through bootloader webserver:
- Plug power and hold reset button until red LED blink to bright.
- Install sysupgrade image using web interface on 192.168.1.1.
Signed-off-by: Kyson Lok <kysonlok@gmail.com>
[match maximum image size with firmware partition]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files/lib')
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 |
2 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4213159..4b60a07 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -217,6 +217,9 @@ ramips_board_detect() { *"GL-MT750") name="gl-mt750" ;; + *"GL-MT300N-V2") + name="gl-mt300n-v2" + ;; *"HC5661") name="hc5661" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 32bc453..6aad4c9 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -65,6 +65,7 @@ platform_check_image() { gl-mt300a|\ gl-mt300n|\ gl-mt750|\ + gl-mt300n-v2|\ hc5*61|\ hc5661a|\ hg255d|\ |