summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-03-04 16:09:13 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-03-04 16:09:13 +0000
commit0e486d2fd297d28ddfc34d4adb4eae7050f0d138 (patch)
tree5cc9baa2d7bb54a368db6f1389e9d1526ccac4d8 /target/linux/ramips/base-files
parent44c8b396f990bb1e762e1f9cef9bca34b78dc9f7 (diff)
downloadmtk-20170518-0e486d2fd297d28ddfc34d4adb4eae7050f0d138.zip
mtk-20170518-0e486d2fd297d28ddfc34d4adb4eae7050f0d138.tar.gz
mtk-20170518-0e486d2fd297d28ddfc34d4adb4eae7050f0d138.tar.bz2
ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> SVN-Revision: 30809
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
4 files changed, 10 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 0a13ddb..f8dac49 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -99,6 +99,9 @@ get_status_led() {
wr512-3gn)
status_led="wr512:green:wps"
;;
+ xdxrn502j)
+ status_led="xdxrn502j:green:power"
+ ;;
esac
}
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 148fda2..bc23208 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -70,7 +70,8 @@ case "$FIRMWARE" in
wl-351 | \
wli-tx4-ag300n | \
wr512-3gn | \
- wr6202)
+ wr6202 | \
+ xdxrn502j)
rt2x00_eeprom_extract "factory" 0 272
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index cb9c7ab..97cacfa 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -28,7 +28,8 @@ preinit_set_mac_address() {
nbg-419n |\
omni-emb |\
w502u |\
- wr6202)
+ wr6202 |\
+ xdxrn502j)
mac=$(ramips_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3567209..faa2485 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -143,6 +143,9 @@ ramips_board_name() {
*"AWB WR6202")
name="wr6202"
;;
+ *"XDX RN502J")
+ name="xdxrn502j"
+ ;;
*)
name="generic"
;;