summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-05-02 19:17:59 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-05-02 19:17:59 +0000
commitb0449ccf04eae59aec6f90493d5a563fa8b15eea (patch)
tree86c8cf3400b022299c600f8d178c0275ecdaeff2 /target/linux/ramips/base-files
parent90e99b9fe893f829e5266ad53ece428ea2f56ccf (diff)
downloadmtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.zip
mtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.gz
mtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.bz2
ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> SVN-Revision: 31557
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh2
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network1
2 files changed, 1 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 43fda2f..78c9e94 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -82,7 +82,7 @@ get_status_led() {
status_led="v22rw-2x2:green:security"
;;
w306r-v20)
- status_led="w306r:green:sys"
+ status_led="w306r-v20:green:sys"
;;
w502u)
status_led="alfa:blue:wps"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index c987a25..43d5726 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -59,7 +59,6 @@ ramips_setup_interfaces()
;;
freestation5 | \
- w306r-v20 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;