diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2012-05-02 19:17:59 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2012-05-02 19:17:59 +0000 |
| commit | b0449ccf04eae59aec6f90493d5a563fa8b15eea (patch) | |
| tree | 86c8cf3400b022299c600f8d178c0275ecdaeff2 /target/linux/ramips/base-files | |
| parent | 90e99b9fe893f829e5266ad53ece428ea2f56ccf (diff) | |
| download | mtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.zip mtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.gz mtk-20170518-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.bz2 | |
ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
Diffstat (limited to 'target/linux/ramips/base-files')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/diag.sh | 2 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/network | 1 |
2 files changed, 1 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 43fda2f..78c9e94 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -82,7 +82,7 @@ get_status_led() { status_led="v22rw-2x2:green:security" ;; w306r-v20) - status_led="w306r:green:sys" + status_led="w306r-v20:green:sys" ;; w502u) status_led="alfa:blue:wps" diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index c987a25..43d5726 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -59,7 +59,6 @@ ramips_setup_interfaces() ;; freestation5 | \ - w306r-v20 | \ wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; |