summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-01-23 10:23:32 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-01-23 10:23:32 +0000
commit9cf1d4e06e836d0a6270bb70f6aee5ba5c607f18 (patch)
tree4fdae87cb2717573b57f3c70579fca6f8b47ed5d /target/linux/ramips/base-files
parent44517a3789318bc8ec874dac49de1834b97d8992 (diff)
downloadmtk-20170518-9cf1d4e06e836d0a6270bb70f6aee5ba5c607f18.zip
mtk-20170518-9cf1d4e06e836d0a6270bb70f6aee5ba5c607f18.tar.gz
mtk-20170518-9cf1d4e06e836d0a6270bb70f6aee5ba5c607f18.tar.bz2
ramips: scripts updates
In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh10
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/leds9
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network41
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh2
4 files changed, 43 insertions, 19 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index b38f1a5..bbadc32 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -30,14 +30,17 @@ status_led_off() {
get_status_led() {
case $(ramips_board_name) in
+ argus-atp52b)
+ status_led="argus-atp52b:green:run"
+ ;;
dir-300-b1 | dir-600-b1 | dir-600-b2)
status_led="d-link:green:status"
;;
esr-9753)
status_led="esr-9753:orange:power"
;;
- f5d8235-v1)
- status_led="f5d8234-v1:blue:storage"
+ f5d8235-v2)
+ status_led="f5d8235v2:blue:router"
;;
fonera20n)
status_led="fonera20n:green:power"
@@ -69,6 +72,9 @@ get_status_led() {
w502u)
status_led="alfa:blue:wps"
;;
+ wcr-150gn)
+ status_led="wcr150gn:amber:power"
+ ;;
whr-g300n)
status_led="whr-g300n:green:router"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index 0877a1d..02d522a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -39,6 +39,12 @@ case $board in
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ f5d8235-v1)
+ set_usb_led "f5d8235-v1:blue:storage"
+ ;;
+ f5d8235-v2)
+ set_usb_led "f5d8235v2:blue:storage"
+ ;;
fonera20n)
set_usb_led "fonera20n:amber:usb"
;;
@@ -55,4 +61,7 @@ case $board in
set_usb_led "alfa:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
+ wcr-150gn)
+ set_usb_led "wcr150gn:amber:user"
+ ;;
esac
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 7e58ef0..89a3e35 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -18,12 +18,20 @@ ramips_setup_interfaces()
case $board in
argus-atp52b | \
b2c | \
- f5d8235-v2 | \
nw718 | \
w502u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
+ f5d8235-v1 | \
+ rt-n15)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "rtl8366s" "1" "1"
+ ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
+ ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+ ;;
+
+ f5d8235-v2 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366rb" "1" "1"
@@ -31,16 +39,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
;;
- wli-tx4-ag300n)
- ucidef_set_interface_lan "eth0"
+ wcr-150gn)
+ ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
;;
- f5d8235-v1 | \
- rt-n15)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "rtl8366s" "1" "1"
- ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
- ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+ wli-tx4-ag300n)
+ ucidef_set_interface_lan "eth0"
;;
*)
@@ -61,11 +65,6 @@ ramips_setup_macs()
local wan_mac=""
case $board in
- f5d8235-v2)
- lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
- wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
- ;;
-
argus-atp52b | \
b2c | \
f5d8235-v1 | \
@@ -89,19 +88,29 @@ ramips_setup_macs()
wan_mac=$(ramips_get_mac_binary factory 40)
;;
+ f5d8235-v2)
+ lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+ wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+ ;;
+
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)
;;
+ wcr-150gn)
+ lan_mac=$(ramips_get_mac_binary factory 4)
+ wan_mac=$(ramips_get_mac_binary factory 40)
+ ;;
+
wli-tx4-ag300n)
lan_mac=$(ramips_get_mac_binary factory 4)
;;
esac
- [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
- [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 0a336ea..dca2d1d 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -98,7 +98,7 @@ ramips_board_name() {
*"RT-N15")
name="rt-n15"
;;
- *"WCR-150GN")
+ *"Sparklan WCR-150GN")
name="wcr-150gn"
;;
*"V22RW-2X2")