summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-11-03 21:12:49 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2017-11-14 22:36:46 +0100
commitfa36bea470b3f1f26da4af80ac1e0f0b667a3466 (patch)
treecf4a629d89141ab92b3be417f8a1547b3de12fe7 /target/linux/ramips/base-files
parent46ab81e405d238e95071d7d56a0f07bb51fc8cb3 (diff)
downloadmtk-20170518-fa36bea470b3f1f26da4af80ac1e0f0b667a3466.zip
mtk-20170518-fa36bea470b3f1f26da4af80ac1e0f0b667a3466.tar.gz
mtk-20170518-fa36bea470b3f1f26da4af80ac1e0f0b667a3466.tar.bz2
ramips: add support for UniElec U7628-01
UniElec U7628-01 is a router platform board based on MediaTek MT7628AN. The device has the following specifications: - MT7628AN (580MHz) - 64/128/256 MB of RAM (DDR2) - 8/16 MB of flash (SPI NOR) - 5x 10/100 Mbps Ethernet (MT7628 built-in switch) - 1x 2T2R 2.4 GHz Wi-Fi (MT7628) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x miniSIM slot - 1x microSD slot - 1x USB 2.0 port - 7x single-color LEDs (GPIO-controlled) - 1x bi-color LED (green GPIO-controlled, red -> LED_WLAN# in miniPCIe) - 1x reset button - 1x UART header (4-pins) - 1x SDXC/GPIO header (10-pins, connected with microSD slot) - 1x DC jack for main power (12 V) The following has been tested and is working: - Ethernet switch - miniPCIe slot (tested with modem and Wi-Fi card) - miniSIM slot - sysupgrade - reset button - USB 2.0 port* Due to a missing driver (MMC over GPIO) this is not supported: - microSD card reader * Warning: USB buses in miniPCIe and regular A-type socket are connected together, without any proper analog switch or USB HUB. Installation: This board might come with a different firmware versions (MediaTek SDK, PandoraBox, Padavan, etc.). If your board comes with PandoraBox, you can install LEDE using sysupgrade. Just SSH to the router and perform forced sysupgrade (due to a board name mismatch). The default IP of this board should be: 192.168.1.1 and username/password: root/admin. In case of a different firmware, you can use web based recovery described below. Use the following command to perform the sysupgrade (for the 128MB RAM/16MB flash version): sysupgrade -n -F lede-ramips-mt76x8-u7628-01-128M-16M-squashfs-sysupgrade.bin Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. SDXC/GPIO header (J3): 1. SDXC_D3 / I2C_SCLK 2. SDXC_D2 / I2C_SD 3. SDXC_D1 / I2S_DI 4. SDXC_D0 / I2S_WS 5. SDXC_CMD / I2S_CLK 6. SDXC_CLK / GPIO0 7. SDXC_CD / UART_RXD1 8. UART_TXD1 9. 3V3 10. GND Other notes: 1. The board is available with different amounts of RAM and flash. We have only added support for the 128/16 MB configuration, as that seems to be the default. However, all the required infrastructure is in place for making support for the other configurations easy. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
5 files changed, 17 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 037331d..74e405e 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -372,6 +372,15 @@ u25awf-h1)
set_wifi_led "u25awf:red:wifi"
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
;;
+u7628-01-128M-16M)
+ ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
+ set_usb_led "u7628-01:green:usb"
+ set_wifi_led "u7628-01:green:wlan"
+ ;;
vocore-8M|\
vocore-16M)
ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index da3231d..ba9ab15 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -174,6 +174,7 @@ ramips_setup_interfaces()
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
+ u7628-01-128M-16M|\
ubnt-erx|\
ubnt-erx-sfp|\
ur-326n4g|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 107e675..50cc440 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -246,6 +246,9 @@ get_status_led() {
u7621-06-256M-16M)
status_led="u7621-06:green:status"
;;
+ u7628-01-128M-16M)
+ status_led="u7628-01:green:power"
+ ;;
v22rw-2x2)
status_led="$board:green:security"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 32128a4..b71a130 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -514,6 +514,9 @@ ramips_board_detect() {
*"U7621-06 (256M RAM/16M flash)")
name="u7621-06-256M-16M"
;;
+ *"U7628-01 (128M RAM/16M flash)")
+ name="u7628-01-128M-16M"
+ ;;
*"UBNT-ERX")
name="ubnt-erx"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c2f5df7..fb5e600 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -146,6 +146,7 @@ platform_check_image() {
tiny-ac|\
u25awf-h1|\
u7621-06-256M-16M|\
+ u7628-01-128M-16M|\
ur-326n4g|\
ur-336un|\
v22rw-2x2|\