ramips: fix Omnima models, images and profiles names

Official names for supported Omnima products are (as on website):
 * Omnima HPM
 * Omnima MiniEMBWiFi
 * Omnima MiniEMBPlug

This patch changes:
 * board names
 * dts filenames
 * profile names
 * image filenames
 * LED names

for Omnima devices, for consistency.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46627

1 files changed, 149 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts
new file mode 100644
index 0000000..03bf710
--- /dev/null
+++ b/target/linux/ramips/dts/HPM.dts
@@ -0,0 +1,149 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+	compatible = "HPM", "ralink,rt3883-soc";
+	model = "Omnima HPM";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				compatible = "macronix,mx25l12805d";
+				spi-max-frequency = <25000000>;
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					reg = <0x0 0x0030000>;
+					label = "u-boot";
+					read-only;
+				};
+
+				partition@30000 {
+					reg = <0x00030000 0x00010000>;
+					label = "config";
+					read-only;
+				};
+
+				factory: partition@40000 {
+					reg = <0x00040000 0x00010000>;
+					label = "factory";
+					read-only;
+				};
+
+				partition@50000 {
+					reg = <0x00050000 0x00fb0000>;
+					label = "firmware";
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		phy-handle = <&phy0>;
+		phy-mode = "rgmii";
+		mtd-mac-address = <&factory 0x28>;
+
+		mdio-bus {
+			status = "okay";
+
+			phy0: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 14 0>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "hpm:orange:power";
+			gpios = <&gpio0 7 1>;
+		};
+
+		status {
+			label = "hpm:green:status";
+			gpios = <&gpio0 21 1>;
+		};
+
+		eth {
+			label = "hpm:green:eth";
+			gpios = <&gpio0 20 1>;
+		};
+
+		eth2 {
+			label = "hpm:red:eth";
+			gpios = <&gpio0 18 1>;
+		};
+
+		wifi {
+			label = "hpm:green:wifi";
+			gpios = <&gpio0 17 1>;
+		};
+
+		wifi2 {
+			label = "hpm:red:wifi";
+			gpios = <&gpio0 19 1>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		/* gpio 12 and 13 handle the OC input */
+
+		usb0 {
+			gpio-export,name = "usb0";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 2 0>;
+		};
+
+		usb1 {
+			gpio-export,name = "usb1";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 1 0>;
+		};
+	};
+};