diff options
| author | Paul Wassi <p.wassi@gmx.at> | 2017-07-22 11:15:55 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-07-25 21:02:27 +0200 |
| commit | ece85e2e49e021cea0455e19182c67854bbb9eb8 (patch) | |
| tree | fdc44280d4b6f9132c98a4658c054a6f4c117325 /target/linux/ramips/dts/VOCORE2.dts | |
| parent | 870ca0da7a55d35718f7218f80b7cdb3696ae35b (diff) | |
| download | mtk-20170518-ece85e2e49e021cea0455e19182c67854bbb9eb8.zip mtk-20170518-ece85e2e49e021cea0455e19182c67854bbb9eb8.tar.gz mtk-20170518-ece85e2e49e021cea0455e19182c67854bbb9eb8.tar.bz2 | |
ramips: DTS: VoCore2 improvements/fixes
The VoCore2 features 128MB of RAM, therefore set
memory in DTS to 128*1024*1024 = 0x8000000
The board's LED is connected to GND, set it to
ACTIVE_HIGH here.
Make serial console working again on kernel 4.9 by
change of pinmux configuration.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Diffstat (limited to 'target/linux/ramips/dts/VOCORE2.dts')
| -rw-r--r-- | target/linux/ramips/dts/VOCORE2.dts | 25 |
1 files changed, 3 insertions, 22 deletions
diff --git a/target/linux/ramips/dts/VOCORE2.dts b/target/linux/ramips/dts/VOCORE2.dts index 297cd1b..9173951 100644 --- a/target/linux/ramips/dts/VOCORE2.dts +++ b/target/linux/ramips/dts/VOCORE2.dts @@ -15,7 +15,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x4000000>; + reg = <0x0 0x8000000>; }; gpio-leds { @@ -23,7 +23,7 @@ status { label = "vocore2:fuchsia:status"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; }; }; @@ -31,28 +31,9 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "refclk", "gpio"; + ralink,group = "wled_an", "perst", "wdt"; ralink,function = "gpio"; }; - - agpio { - ralink,group = "agpio"; - ralink,function = "uart2"; - }; - }; - - uart1_pins: uart1 { - uart1 { - ralink,group = "uart1"; - ralink,function = "uart1"; - }; - }; - - uart2_pins: uart2 { - uart2 { - ralink,group = "spis"; - ralink,function = "pwm"; - }; }; }; |