ramips: fix Asus WL-330N{, 3G} boards names

There are other Asus boards supported in ramips target, so use the same naming scheme for WL-330N{,3G} boards and their dts files.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46615

1 files changed, 0 insertions, 109 deletions

diff --git a/target/linux/ramips/dts/WL_330N3G.dts b/target/linux/ramips/dts/WL_330N3G.dts
deleted file mode 100644
index aa4c547..0000000
--- a/target/linux/ramips/dts/WL_330N3G.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/dts-v1/;
-
-/include/ "rt3050.dtsi"
-
-/ {
-	compatible = "WL_330N3G", "ralink,rt3050-soc";
-	model = "Asus WL-330N3G";
-
-	palmbus@10000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l3205d";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "mx25l3205d";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x3b0000>;
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
-	};
-
-	esw@10110000 {
-		ralink,portmap = <0x3e>;
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		3g {
-			label = "asus:blue:3g";
-			gpios = <&gpio0 9 1>;
-		};
-
-		3g2 {
-			label = "asus:red:3g";
-			gpios = <&gpio0 13 1>;
-		};
-
-		power {
-			label = "asus:blue:power";
-			gpios = <&gpio0 11 1>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <0x198>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-	};
-
-	otg@101c0000 {
-		status = "okay";
-	};
-};