ramips: fix Buffalo WMR-300 dts, board, image and profile names

The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46628

1 files changed, 0 insertions, 106 deletions

diff --git a/target/linux/ramips/dts/WMR300.dts b/target/linux/ramips/dts/WMR300.dts
deleted file mode 100644
index fbeec4c..0000000
--- a/target/linux/ramips/dts/WMR300.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-/dts-v1/;
-
-/include/ "mt7620n.dtsi"
-
-/ {
-	compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
-	model = "Buffalo WMR-300";
-
-	palmbus@10000000 {
-		gpio2: gpio@660 {
-			status = "okay";
-		};
-
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l6405d";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "en25q64";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x7b0000>;
-				};
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
-		ralink,port-map = "wllll";
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			default {
-				ralink,group = "i2c", "ephy";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		aoss1 {
-			label = "buffalo:red:aoss";
-			gpios = <&gpio2 1 1>;
-		};
-
-		aoss2 {
-			label = "buffalo:green:aoss";
-			gpios = <&gpio2 2 1>;
-		};
-
-		power {
-			label = "buffalo:green:status";
-			gpios = <&gpio2 4 1>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 1>;
-			linux,code = <0x198>;
-		};
-
-		aoss {
-			label = "aoss";
-			gpios = <&gpio0 2 1>;
-			linux,code = <0x211>;
-		};
-	};
-};