ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 44 insertions, 40 deletions

diff --git a/target/linux/ramips/dts/WNCE2001.dts b/target/linux/ramips/dts/WNCE2001.dts
index ee9ca1f..a89bb8a 100644
--- a/target/linux/ramips/dts/WNCE2001.dts
+++ b/target/linux/ramips/dts/WNCE2001.dts
@@ -75,50 +75,54 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		factory: partition@30000 {
-			label = "factory";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "config";
-			reg = <0x40000 0x20000>;
-			read-only;
-		};
-
-		partition@60000 {
-			label = "language";
-			reg = <0x60000 0x30000>;
-			read-only;
-		};
-
-		partition@90000 {
-			label = "pot";
-			reg = <0x90000 0x10000>;
-			read-only;
-		};
-
-		partition@a0000 {
-			label = "checksum";
-			reg = <0xa0000 0x10000>;
-		};
-
-		partition@b0000 {
-			label = "firmware";
-			reg = <0xb0000 0x350000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			factory: partition@30000 {
+				label = "factory";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "config";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "language";
+				reg = <0x60000 0x30000>;
+				read-only;
+			};
+
+			partition@90000 {
+				label = "pot";
+				reg = <0x90000 0x10000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "checksum";
+				reg = <0xa0000 0x10000>;
+			};
+
+			partition@b0000 {
+				label = "firmware";
+				reg = <0xb0000 0x350000>;
+			};
 		};
 	};
 };