ramips: remove trailing whitespaces from .dts{,i} files

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38601

12 files changed, 18 insertions, 18 deletions

diff --git a/target/linux/ramips/dts/DCS-930.dts b/target/linux/ramips/dts/DCS-930.dts
index dd95981..8876d9b 100644
--- a/target/linux/ramips/dts/DCS-930.dts
+++ b/target/linux/ramips/dts/DCS-930.dts
@@ -51,7 +51,7 @@
 			label = "rootfs";
 			reg = <0x150000 0x2b0000>;
 		};
-	
+
 		partition {
 			label = "firmware";
 			reg = <0x50000 0x3b0000>;
diff --git a/target/linux/ramips/dts/DIR-320-B1.dts b/target/linux/ramips/dts/DIR-320-B1.dts
index 2d8e402..f07e528 100644
--- a/target/linux/ramips/dts/DIR-320-B1.dts
+++ b/target/linux/ramips/dts/DIR-320-B1.dts
@@ -66,7 +66,7 @@
 		usb {
 			label = "d-link:green:usb";
 			gpios = <&gpio0 14 1>;
-		};		
+		};
 		wps {
 			label = "d-link:green:wps";
 			gpios = <&gpio0 13 1>;
@@ -109,11 +109,11 @@
 			gpio-export,output = <1>;
 			gpios = <&gpio0 7 0>;
 		};
-	
+
 		root_hub {
 			gpio-export,name = "root_hub";
 			gpio-export,output = <1>;
 			gpios = <&gpio0 12 0>;
 		};
 	};
-}; 
+};
diff --git a/target/linux/ramips/dts/DIR-810L.dts b/target/linux/ramips/dts/DIR-810L.dts
index 6da0976..95017d9 100644
--- a/target/linux/ramips/dts/DIR-810L.dts
+++ b/target/linux/ramips/dts/DIR-810L.dts
@@ -9,7 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/target/linux/ramips/dts/HG255D.dts b/target/linux/ramips/dts/HG255D.dts
index 09d7a45..68e5e8a 100644
--- a/target/linux/ramips/dts/HG255D.dts
+++ b/target/linux/ramips/dts/HG255D.dts
@@ -46,7 +46,7 @@
 			label = "firmware";
 			reg = <0x80000 0xf60000>;
 		};
-		
+
 		partition@fa0000 {
 			label = "factory-orig";
 			reg = <0xfa0000 0x20000>;
diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
index 0a5999b..05b8da3 100644
--- a/target/linux/ramips/dts/MT7620a.dts
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -9,7 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -55,7 +55,7 @@
 
 	ethernet@10100000 {
 		status = "okay";
-		
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 
diff --git a/target/linux/ramips/dts/MT7620a_MT7530.dts b/target/linux/ramips/dts/MT7620a_MT7530.dts
index fcd1219..4b64e56 100644
--- a/target/linux/ramips/dts/MT7620a_MT7530.dts
+++ b/target/linux/ramips/dts/MT7620a_MT7530.dts
@@ -9,7 +9,7 @@
 	palmbus@10000000 {
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -55,10 +55,10 @@
 
 	ethernet@10100000 {
 		status = "okay";
-		
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-		
+
 		ralink,port-map = "llllw";
 
 		port@5 {
diff --git a/target/linux/ramips/dts/MT7620a_MT7610e.dts b/target/linux/ramips/dts/MT7620a_MT7610e.dts
index 8809286..e7ae5f6 100644
--- a/target/linux/ramips/dts/MT7620a_MT7610e.dts
+++ b/target/linux/ramips/dts/MT7620a_MT7610e.dts
@@ -19,7 +19,7 @@
 
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/target/linux/ramips/dts/RP-N53.dts b/target/linux/ramips/dts/RP-N53.dts
index a7bff11..e19639a 100644
--- a/target/linux/ramips/dts/RP-N53.dts
+++ b/target/linux/ramips/dts/RP-N53.dts
@@ -24,7 +24,7 @@
 
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/target/linux/ramips/dts/WHR-300HP2.dts b/target/linux/ramips/dts/WHR-300HP2.dts
index 1a0b8c3..9204ded 100644
--- a/target/linux/ramips/dts/WHR-300HP2.dts
+++ b/target/linux/ramips/dts/WHR-300HP2.dts
@@ -13,7 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
index 00d9d03..92fc051 100644
--- a/target/linux/ramips/dts/WHR-600D.dts
+++ b/target/linux/ramips/dts/WHR-600D.dts
@@ -13,7 +13,7 @@
 
 		spi@b00 {
 			status = "okay";
-		
+
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi
index 86a4d15..9f29aa0 100644
--- a/target/linux/ramips/dts/rt3050.dtsi
+++ b/target/linux/ramips/dts/rt3050.dtsi
@@ -147,7 +147,7 @@
 		spi@b00 {
 			compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
 			reg = <0xb00 0x100>;
-			
+
 			resets = <&rstctrl 18>;
 			reset-names = "spi";
 
@@ -163,7 +163,7 @@
 		uartlite@c00 {
 			compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
- 
+
 			resets = <&rstctrl 19>;
 			reset-names = "uartl";
 
diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi
index db38b00..ca81bb6 100644
--- a/target/linux/ramips/dts/rt3352.dtsi
+++ b/target/linux/ramips/dts/rt3352.dtsi
@@ -148,7 +148,7 @@
 
 			resets = <&rstctrl 18>;
 			reset-names = "spi";
-	
+
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi_pins>;