ralink: add support for dalink dcs930l ipcam

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053

1 files changed, 118 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/DCS-930.dts b/target/linux/ramips/dts/DCS-930.dts
new file mode 100644
index 0000000..31dab45
--- /dev/null
+++ b/target/linux/ramips/dts/DCS-930.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "DCS-930", "ralink,rt3050-soc";
+	model = "D-Link DCS-930";
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x400000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wifi {
+			label = "d-link:red:alert";
+			gpios = <&gpio0 8 1>;
+		};
+		power {
+			label = "d-link:green:status";
+			gpios = <&gpio0 9 1>;
+		};
+		wps {
+			label = "d-link:blue:wps";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x101>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+
+		port@0 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <0 4>;
+		};
+		port@1 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <1 3>;
+		};
+		port@2 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <2 2>;
+		};
+		port@3 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <3 1>;
+		};
+		port@4 {
+			compatible = "swconfig,port";
+			swconfig,segment = "wan";
+			swconfig,portmap = <4 0>;
+		};
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};