ramips: remove interrupt coalescing, it is unnecessary with napi polling and could reduce throughput

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43952

7 files changed, 40 insertions, 78 deletions

diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_ethtool.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_ethtool.c
index b1077bc..c7744ba 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_ethtool.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_ethtool.c
@@ -140,54 +140,6 @@ static void fe_get_ringparam(struct net_device *dev,
 	ring->tx_pending = NUM_DMA_DESC;
 }
 
-static int fe_get_coalesce(struct net_device *dev,
-		struct ethtool_coalesce *coal)
-{
-        u32 delay_cfg = fe_reg_r32(FE_REG_DLY_INT_CFG);
-
-        coal->rx_coalesce_usecs = (delay_cfg & 0xff) * FE_DELAY_TIME;
-        coal->rx_max_coalesced_frames = ((delay_cfg >> 8) & 0x7f);
-        coal->use_adaptive_rx_coalesce = (delay_cfg >> 15) & 0x1;
-
-        coal->tx_coalesce_usecs = ((delay_cfg >> 16 )& 0xff) * FE_DELAY_TIME;
-        coal->tx_max_coalesced_frames = ((delay_cfg >> 24) & 0x7f);
-        coal->use_adaptive_tx_coalesce = (delay_cfg >> 31) & 0x1;
-
-        return 0;
-}
-
-static int fe_set_coalesce(struct net_device *dev,
-		struct ethtool_coalesce *coal)
-{
-	u32 delay_cfg;
-	u32 rx_usecs, tx_usecs;
-	u32 rx_frames, tx_frames;
-
-	if (!coal->use_adaptive_rx_coalesce || !coal->use_adaptive_tx_coalesce)
-		return -EINVAL;
-
-	rx_usecs = DIV_ROUND_UP(coal->rx_coalesce_usecs, FE_DELAY_TIME);
-	rx_frames = coal->rx_max_coalesced_frames;
-	tx_usecs = DIV_ROUND_UP(coal->tx_coalesce_usecs, FE_DELAY_TIME);
-	tx_frames = coal->tx_max_coalesced_frames;
-
-	if (((tx_usecs == 0) && (tx_frames ==0)) ||
-			((rx_usecs == 0) && (rx_frames ==0)))
-		return -EINVAL;
-
-	if (rx_usecs > 0xff) rx_usecs = 0xff;
-	if (rx_frames > 0x7f) rx_frames = 0x7f;
-	if (tx_usecs > 0xff) tx_usecs = 0xff;
-	if (tx_frames > 0x7f) tx_frames = 0x7f;
-
-	delay_cfg = ((((FE_DELAY_EN_INT | tx_frames) << 8) | tx_usecs) << 16) |
-		(((FE_DELAY_EN_INT | rx_frames) << 8) | rx_usecs);
-
-	fe_reg_w32(delay_cfg, FE_REG_DLY_INT_CFG);
-
-	return 0;
-}
-
 static void fe_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 {
 	switch (stringset) {
@@ -243,8 +195,6 @@ static struct ethtool_ops fe_ethtool_ops = {
 	.nway_reset		= fe_nway_reset,
 	.get_link		= fe_get_link,
 	.get_ringparam		= fe_get_ringparam,
-	.get_coalesce		= fe_get_coalesce,
-	.set_coalesce		= fe_set_coalesce,
 };
 
 void fe_set_ethtool_ops(struct net_device *netdev)
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
index 068366a..67934c6 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -842,8 +842,8 @@ static int fe_poll(struct napi_struct *napi, int budget)
 	u32 tx_intr, rx_intr;
 
 	status = fe_reg_r32(FE_REG_FE_INT_STATUS);
-	tx_intr = priv->soc->tx_dly_int;
-	rx_intr = priv->soc->rx_dly_int;
+	tx_intr = priv->soc->tx_int;
+	rx_intr = priv->soc->rx_int;
 	tx_done = rx_done = 0;
 
 poll_again:
@@ -907,16 +907,16 @@ static void fe_tx_timeout(struct net_device *dev)
 static irqreturn_t fe_handle_irq(int irq, void *dev)
 {
 	struct fe_priv *priv = netdev_priv(dev);
-	u32 status, dly_int;
+	u32 status, int_mask;
 
 	status = fe_reg_r32(FE_REG_FE_INT_STATUS);
 
 	if (unlikely(!status))
 		return IRQ_NONE;
 
-	dly_int = (priv->soc->rx_dly_int | priv->soc->tx_dly_int);
-	if (likely(status & dly_int)) {
-		fe_int_disable(dly_int);
+	int_mask = (priv->soc->rx_int | priv->soc->tx_int);
+	if (likely(status & int_mask)) {
+		fe_int_disable(int_mask);
 		napi_schedule(&priv->rx_napi);
 	} else {
 		fe_reg_w32(status, FE_REG_FE_INT_STATUS);
@@ -929,11 +929,11 @@ static irqreturn_t fe_handle_irq(int irq, void *dev)
 static void fe_poll_controller(struct net_device *dev)
 {
 	struct fe_priv *priv = netdev_priv(dev);
-	u32 dly_int = priv->soc->tx_dly_int | priv->soc->rx_dly_int;
+	u32 int_mask = priv->soc->tx_int | priv->soc->rx_int;
 
-	fe_int_disable(dly_int);
+	fe_int_disable(int_mask);
 	fe_handle_irq(dev->irq, dev);
-	fe_int_enable(dly_int);
+	fe_int_enable(int_mask);
 }
 #endif
 
@@ -1018,9 +1018,7 @@ static int fe_hw_init(struct net_device *dev)
 	else
 		fe_hw_set_macaddr(priv, dev->dev_addr);
 
-	fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG);
-
-	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
+	fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
 
         /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc. */
 	if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
@@ -1068,7 +1066,7 @@ static int fe_open(struct net_device *dev)
 		netif_carrier_on(dev);
 
 	netif_start_queue(dev);
-	fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
+	fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
 
 	return 0;
 
@@ -1083,7 +1081,7 @@ static int fe_stop(struct net_device *dev)
 	unsigned long flags;
 	int i;
 
-	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
+	fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
 
 	netif_tx_disable(dev);
 
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h
index 8245330..d26acf2 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h
@@ -79,8 +79,22 @@ enum fe_reg {
 #define FE_TX_DLY_INT		BIT(1)
 #define FE_RX_DLY_INT		BIT(0)
 
+#define FE_RX_DONE_INT		FE_RX_DONE_INT0
+#define FE_TX_DONE_INT		(FE_TX_DONE_INT0 | FE_TX_DONE_INT1 | \
+				 FE_TX_DONE_INT2 | FE_TX_DONE_INT3)
+
 #define RT5350_RX_DLY_INT	BIT(30)
 #define RT5350_TX_DLY_INT	BIT(28)
+#define RT5350_RX_DONE_INT1	BIT(17)
+#define RT5350_RX_DONE_INT0	BIT(16)
+#define RT5350_TX_DONE_INT3	BIT(3)
+#define RT5350_TX_DONE_INT2	BIT(2)
+#define RT5350_TX_DONE_INT1	BIT(1)
+#define RT5350_TX_DONE_INT0	BIT(0)
+
+#define RT5350_RX_DONE_INT	(RT5350_RX_DONE_INT0 | RT5350_RX_DONE_INT1)
+#define RT5350_TX_DONE_INT	(RT5350_TX_DONE_INT0 | RT5350_TX_DONE_INT1 | \
+				 RT5350_TX_DONE_INT2 | RT5350_TX_DONE_INT3)
 
 /* registers */
 #define FE_FE_OFFSET		0x0000
@@ -367,8 +381,8 @@ struct fe_soc_data
 
 	void *swpriv;
 	u32 pdma_glo_cfg;
-	u32 rx_dly_int;
-	u32 tx_dly_int;
+	u32 rx_int;
+	u32 tx_int;
 	u32 checksum_bit;
 	u32 tx_udf_bit;
 };
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c
index 60666e7..e481c40 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c
@@ -225,8 +225,8 @@ static struct fe_soc_data mt7620_data = {
 	.port_init = mt7620_port_init,
 	.reg_table = mt7620_reg_table,
 	.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
-	.rx_dly_int = RT5350_RX_DLY_INT,
-	.tx_dly_int = RT5350_TX_DLY_INT,
+	.rx_int = RT5350_RX_DONE_INT,
+	.tx_int = RT5350_TX_DONE_INT,
 	.checksum_bit = MT7620_L4_VALID,
 	.tx_udf_bit = MT7620_TX_DMA_UDF,
 	.has_carrier = mt7620a_has_carrier,
@@ -247,8 +247,8 @@ static struct fe_soc_data mt7621_data = {
 	.switch_config = mt7621_gsw_config,
 	.reg_table = mt7621_reg_table,
 	.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
-	.rx_dly_int = RT5350_RX_DLY_INT,
-	.tx_dly_int = RT5350_TX_DLY_INT,
+	.rx_int = RT5350_RX_DONE_INT,
+	.tx_int = RT5350_TX_DONE_INT,
 	.checksum_bit = MT7621_L4_VALID,
 	.tx_udf_bit = MT7621_TX_DMA_UDF,
 	.has_carrier = mt7620a_has_carrier,
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt2880.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt2880.c
index 61f6dcb..4602745 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt2880.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt2880.c
@@ -65,8 +65,8 @@ struct fe_soc_data rt2880_data = {
 	.pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
 	.checksum_bit = RX_DMA_L4VALID,
 	.tx_udf_bit = TX_DMA_UDF,
-	.rx_dly_int = FE_RX_DLY_INT,
-	.tx_dly_int = FE_TX_DLY_INT,
+	.rx_int = FE_RX_DONE_INT,
+	.tx_int = FE_TX_DONE_INT,
 	.mdio_read = rt2880_mdio_read,
 	.mdio_write = rt2880_mdio_write,
 	.mdio_adjust_link = rt2880_mdio_link_adjust,
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c
index 1ece548..2a8e5f7 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c
@@ -133,8 +133,8 @@ static struct fe_soc_data rt3050_data = {
 	.pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
 	.checksum_bit = RX_DMA_L4VALID,
 	.tx_udf_bit = TX_DMA_UDF,
-	.rx_dly_int = FE_RX_DLY_INT,
-	.tx_dly_int = FE_TX_DLY_INT,
+	.rx_int = FE_RX_DONE_INT,
+	.tx_int = FE_TX_DONE_INT,
 };
 
 static struct fe_soc_data rt5350_data = {
@@ -148,8 +148,8 @@ static struct fe_soc_data rt5350_data = {
 	.pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
 	.checksum_bit = RX_DMA_L4VALID,
 	.tx_udf_bit = TX_DMA_UDF,
-	.rx_dly_int = RT5350_RX_DLY_INT,
-	.tx_dly_int = RT5350_TX_DLY_INT,
+	.rx_int = RT5350_RX_DONE_INT,
+	.tx_int = RT5350_TX_DONE_INT,
 };
 
 const struct of_device_id of_fe_match[] = {
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3883.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3883.c
index d935b96..1393f02 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3883.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3883.c
@@ -69,8 +69,8 @@ static struct fe_soc_data rt3883_data = {
 	.reset_fe = rt3883_fe_reset,
 	.fwd_config = rt3883_fwd_config,
 	.pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-	.rx_dly_int = FE_RX_DLY_INT,
-	.tx_dly_int = FE_TX_DLY_INT,
+	.rx_int = FE_RX_DONE_INT,
+	.tx_int = FE_TX_DONE_INT,
 	.checksum_bit = RX_DMA_L4VALID,
 	.tx_udf_bit = TX_DMA_UDF,
 	.mdio_read = rt2880_mdio_read,