ramips: drop 3.7 support

Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572

12 files changed, 0 insertions, 370 deletions

diff --git a/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch
deleted file mode 100644
index 41e5e8e..0000000
--- a/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1598,6 +1599,8 @@ void __cpuinit per_cpu_trap_init(bool is
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
diff --git a/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
deleted file mode 100644
index bf076fe..0000000
--- a/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1927,7 +1927,7 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr))
-+		if (chip_good(map, adr, map_word_ff(map)))
- 			break;
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -2016,7 +2016,7 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
- 			break;
- 		}
diff --git a/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index 5f9df14..0000000
--- a/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -50,7 +50,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- 	struct map_info *map = mtd->priv;
-@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
- 		mtd->_write = cfi_amdstd_write_buffers;
- 	}
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- 				    unsigned long adr, const u_char *buf,
- 				    int len)
-@@ -1555,7 +1560,6 @@ static int __xipram do_write_buffer(stru
- 	return ret;
- }
- 
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- 				    size_t *retlen, const u_char *buf)
- {
-@@ -1630,6 +1634,7 @@ static int cfi_amdstd_write_buffers(stru
- 
- 	return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /*
-  * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch
deleted file mode 100644
index cfca52b..0000000
--- a/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -103,6 +103,9 @@ config ATH79
- 	help
- 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
- 
-+config MIPS_RALINK
-+	bool "Ralink MIPS SoC based boards"
-+
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
- 	select CEVT_R4K
-@@ -864,6 +867,7 @@ source "arch/mips/jz4740/Kconfig"
- source "arch/mips/lantiq/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/powertv/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
-@@ -1206,7 +1210,7 @@ config BOOT_ELF32
- 
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- 	default "6" if MIPS_CPU_SCACHE
- 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- 	default "5"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -22,6 +22,7 @@ platforms += pmc-sierra
- platforms += pnx833x
- platforms += pnx8550
- platforms += powertv
-+platforms += ralink
- platforms += rb532
- platforms += sgi-ip22
- platforms += sgi-ip27
diff --git a/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 4269e86..0000000
--- a/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN
- 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
- 	  cards.  If unsure, say N.
- 
-+config SERIAL_8250_RT288X
-+	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-+	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+	help
-+	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+	  serial port, say Y to this option. The driver can handle up to 2 serial
-+	  ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- 	bool "Support for MIPS RM9xxx integrated serial port"
- 	depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -132,7 +132,7 @@ struct uart_port {
- #define UPIO_HUB6		(1)
- #define UPIO_MEM		(2)
- #define UPIO_MEM32		(3)
--#define UPIO_AU			(4)			/* Au1x00 type IO */
-+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
- #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- #define UPIO_RM9000		(6)			/* RM9000 type IO */
- 
---- a/drivers/tty/serial/8250/8250.c
-+++ b/drivers/tty/serial/8250/8250.c
-@@ -314,9 +314,9 @@ static void default_serial_dl_write(stru
- 	serial_out(up, UART_DLM, value >> 8 & 0xff);
- }
- 
--#ifdef CONFIG_MIPS_ALCHEMY
-+#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X)
- 
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- 	[UART_RX]  = 0,
- 	[UART_IER] = 2,
-@@ -495,7 +495,7 @@ static void set_io_from_upio(struct uart
- 		break;
- #endif
- 
--#ifdef CONFIG_MIPS_ALCHEMY
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- 	case UPIO_AU:
- 		p->serial_in = au_serial_in;
- 		p->serial_out = au_serial_out;
-@@ -707,22 +707,19 @@ static int size_fifo(struct uart_8250_po
-  */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
--	unsigned char old_dll, old_dlm, old_lcr;
-+	unsigned char old_lcr;
-+	unsigned int old_dl;
- 	unsigned int id;
- 
- 	old_lcr = serial_in(p, UART_LCR);
- 	serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
- 
--	old_dll = serial_in(p, UART_DLL);
--	old_dlm = serial_in(p, UART_DLM);
-+	old_dl = serial_dl_read(p);
- 
--	serial_out(p, UART_DLL, 0);
--	serial_out(p, UART_DLM, 0);
-+	serial_dl_write(p, 0);
-+	id = serial_dl_read(p);
- 
--	id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
--
--	serial_out(p, UART_DLL, old_dll);
--	serial_out(p, UART_DLM, old_dlm);
-+	serial_dl_write(p, old_dl);
- 	serial_out(p, UART_LCR, old_lcr);
- 
- 	return id;
-@@ -848,7 +845,7 @@ static int broken_efr(struct uart_8250_p
- 	/*
- 	 * Exar ST16C2550 "A2" devices incorrectly detect as
- 	 * having an EFR, and report an ID of 0x0201.  See
--	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 
-+	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- 	 */
- 	if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- 		return 1;
diff --git a/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch
deleted file mode 100644
index a76603f..0000000
--- a/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
-+obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.7/103-ethernet.patch b/target/linux/ramips/patches-3.7/103-ethernet.patch
deleted file mode 100644
index 5909cf2..0000000
--- a/target/linux/ramips/patches-3.7/103-ethernet.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/racal/Kconfig"
-+source "drivers/net/ethernet/ramips/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
-+obj-$(CONFIG_NET_RAMIPS) += ramips/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
diff --git a/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch
deleted file mode 100644
index a7df80b..0000000
--- a/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1064,6 +1064,13 @@ config LANTIQ_WDT
- 	help
- 	  Hardware driver for the Lantiq SoC Watchdog Timer.
- 
-+config RAMIPS_WDT
-+	tristate "Ralink RT288X/RT305X Watchdog Timer"
-+	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+	help
-+	  Hardware driver for the built-in watchdog timer on the
-+	  Ralink RT288X/RT305X SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
- 
- # PARISC Architecture
- 
diff --git a/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch
deleted file mode 100644
index 5c46956..0000000
--- a/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -317,6 +317,12 @@ config SPI_RSPI
- 	help
- 	  SPI driver for Renesas RSPI blocks.
- 
-+config SPI_RAMIPS
-+	tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
-+	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+	help
-+	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- 	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C24XX && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
- obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
- obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
- obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RAMIPS)		+= spi-ramips.o
- obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y			:= spi-s3c24xx.o
diff --git a/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch
deleted file mode 100644
index 9f32893..0000000
--- a/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -187,4 +187,6 @@ source "drivers/usb/gadget/Kconfig"
- 
- source "drivers/usb/otg/Kconfig"
- 
-+source "drivers/usb/dwc_otg/Kconfig"
-+
- endif # USB_SUPPORT
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early
- obj-$(CONFIG_USB_ATM)		+= atm/
- obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
- 
-+obj-$(CONFIG_DWC_OTG)		+= dwc_otg/
-+
- obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
- obj-$(CONFIG_USB_CHIPIDEA)	+= chipidea/
- obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
diff --git a/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch b/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch
deleted file mode 100644
index 9f5ef9f..0000000
--- a/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchem
- obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
- obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
-+obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch b/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch
deleted file mode 100644
index c4d12f1..0000000
--- a/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-reverted:
---- a/arch/mips/ralink/rt3883/devices.c
-+++ b/arch/mips/ralink/rt3883/devices.c
-@@ -177,6 +177,7 @@ static void rt3883_usb_power_off(struct
- }
- 
- static struct usb_ehci_pdata rt3883_ehci_data = {
-+	.port_power_off	= 1,
- 	.power_on	= rt3883_usb_power_on,
- 	.power_off	= rt3883_usb_power_off,
- };
---- a/arch/mips/ralink/rt305x/devices.c
-+++ b/arch/mips/ralink/rt305x/devices.c
-@@ -356,6 +356,7 @@ static void rt3352_usb_power_off(struct
- }
- 
- static struct usb_ehci_pdata rt3352_ehci_data = {
-+	.port_power_off	= 1,
- 	.power_on	= rt3352_usb_power_on,
- 	.power_off	= rt3352_usb_power_off,
- };