ramips: Minor ramips_esw.c cleanup

Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301

4 files changed, 18 insertions, 62 deletions

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
index 9634322..2098c5c 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -13,7 +13,6 @@
 
 enum {
 	RT305X_ESW_VLAN_CONFIG_NONE = 0,
-	RT305X_ESW_VLAN_CONFIG_BYPASS,
 	RT305X_ESW_VLAN_CONFIG_LLLLW,
 	RT305X_ESW_VLAN_CONFIG_WLLLL,
 };
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
index 2e884c3..07e950a 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
@@ -156,8 +156,15 @@ static struct resource rt305x_esw_resources[] = {
 };
 
 struct rt305x_esw_platform_data rt305x_esw_data = {
+	/* All ports are LAN ports. */
 	.vlan_config		= RT305X_ESW_VLAN_CONFIG_NONE,
 	.reg_initval_fct2	= 0x00d6500c,
+	/*
+	 * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
+	 * turbo mii off, rgmi 3.3v off
+	 * port5: disabled
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	 */
 	.reg_initval_fpa2	= 0x3f502b28,
 };
 
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
index 8551f25..8c0caad 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
@@ -97,9 +97,15 @@ static void __init wl351_init(void)
 	ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL,
 				     ARRAY_SIZE(wl351_gpio_buttons),
 				     wl351_gpio_buttons);
-	// external rtl8366rb
-	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS;
+	/* External RTL8366RB. */
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
 	rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
+	/*
+	 * ext phy base addr 31, rx/tx clock skew 0,
+	 * turbo mii off, rgmi 3.3v off, port 5 polling off
+	 * port5: enabled, gige, full-duplex, rx/tx-flow-control
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	 */
 	rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
 	rt305x_register_ethernet();
 	platform_device_register(&wl351_switch);
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c b/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c
index 8a70795..19fc3b4 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c
@@ -147,7 +147,6 @@ enum {
 	/* Port attributes. */
 	RT305X_ESW_ATTR_PORT_DISABLE,
 	RT305X_ESW_ATTR_PORT_DOUBLETAG,
-	RT305X_ESW_ATTR_PORT_EN_VLAN,
 	RT305X_ESW_ATTR_PORT_UNTAG,
 	RT305X_ESW_ATTR_PORT_LED,
 	RT305X_ESW_ATTR_PORT_LAN,
@@ -159,7 +158,6 @@ struct rt305x_esw_port {
 	bool	disable;
 	bool	doubletag;
 	bool	untag;
-	bool	en_vlan;
 	u8	led;
 	u16	pvid;
 };
@@ -335,7 +333,7 @@ static void
 rt305x_esw_hw_init(struct rt305x_esw *esw)
 {
 	int i;
-	u8 port_map = 0;
+	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
 
 	/* vodoo from original driver */
 	rt305x_esw_wr(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
@@ -412,55 +410,16 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
 	/* select local register */
 	rt305x_mii_write(esw, 0, 31, 0x8000);
 
-	/* Set up logical config and apply. */
-	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-		esw->vlans[i].vid = RT305X_ESW_VLAN_NONE;
-		esw->vlans[i].ports = RT305X_ESW_PORTS_NONE;
-	}
-
-	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-		esw->ports[i].pvid = 1;
-		esw->ports[i].en_vlan = 1;
-		esw->ports[i].untag = i != RT305X_ESW_PORT6;
-	}
-
 	switch (esw->pdata->vlan_config) {
-	case RT305X_ESW_VLAN_CONFIG_BYPASS:
 	case RT305X_ESW_VLAN_CONFIG_NONE:
 		port_map = RT305X_ESW_PMAP_LLLLLL;
-		esw->global_vlan_enable = 0;
 		break;
-
 	case RT305X_ESW_VLAN_CONFIG_LLLLW:
 		port_map = RT305X_ESW_PMAP_LLLLWL;
-		esw->global_vlan_enable = 1;
-		esw->vlans[0].vid = 1;
-		esw->vlans[1].vid = 2;
-		esw->ports[4].pvid = 2;
-		esw->ports[5].disable = 1;
-		esw->vlans[0].ports =
-				BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |
-				BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |
-				BIT(RT305X_ESW_PORT6);
-		esw->vlans[1].ports =
-				BIT(RT305X_ESW_PORT4) | BIT(RT305X_ESW_PORT6);
 		break;
-
 	case RT305X_ESW_VLAN_CONFIG_WLLLL:
 		port_map = RT305X_ESW_PMAP_WLLLLL;
-		esw->global_vlan_enable = 1;
-		esw->vlans[0].vid = 1;
-		esw->vlans[1].vid = 2;
-		esw->ports[0].pvid = 2;
-		esw->ports[5].disable = 1;
-		esw->vlans[0].ports =
-			BIT(RT305X_ESW_PORT1) | BIT(RT305X_ESW_PORT2) |
-			BIT(RT305X_ESW_PORT3) | BIT(RT305X_ESW_PORT4) |
-			BIT(RT305X_ESW_PORT6);
-		esw->vlans[1].ports =
-				BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT6);
 		break;
-
 	default:
 		BUG();
 	}
@@ -475,6 +434,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
 		       RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
 		       port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
 
+	/* Apply the empty config. */
 	rt305x_esw_apply_config(&esw->swdev);
 }
 
@@ -506,7 +466,7 @@ rt305x_esw_apply_config(struct switch_dev *dev)
 		disable |= esw->ports[i].disable << i;
 		if (esw->global_vlan_enable) {
 			doubletag |= esw->ports[i].doubletag << i;
-			en_vlan   |= esw->ports[i].en_vlan   << i;
+			en_vlan   |= 1                       << i;
 			untag     |= esw->ports[i].untag     << i;
 			pvid       = esw->ports[i].pvid;
 		} else {
@@ -671,10 +631,6 @@ rt305x_esw_get_port_bool(struct switch_dev *dev,
 		reg = RT305X_ESW_REG_SGC2;
 		shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
 		break;
-	case RT305X_ESW_ATTR_PORT_EN_VLAN:
-		reg = RT305X_ESW_REG_PFC1;
-		shift = RT305X_ESW_PFC1_EN_VLAN_S;
-		break;
 	case RT305X_ESW_ATTR_PORT_UNTAG:
 		reg = RT305X_ESW_REG_POC3;
 		shift = RT305X_ESW_POC3_UNTAG_EN_S;
@@ -714,9 +670,6 @@ rt305x_esw_set_port_bool(struct switch_dev *dev,
 	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
 		esw->ports[idx].doubletag = val->value.i;
 		break;
-	case RT305X_ESW_ATTR_PORT_EN_VLAN:
-		esw->ports[idx].en_vlan = val->value.i;
-		break;
 	case RT305X_ESW_ATTR_PORT_UNTAG:
 		esw->ports[idx].untag = val->value.i;
 		break;
@@ -945,15 +898,6 @@ static const struct switch_attr rt305x_esw_port[] = {
 	},
 	{
 		.type = SWITCH_TYPE_INT,
-		.name = "en_vlan",
-		.description = "VLAN enabled (1:enabled)",
-		.max = 1,
-		.id = RT305X_ESW_ATTR_PORT_EN_VLAN,
-		.get = rt305x_esw_get_port_bool,
-		.set = rt305x_esw_set_port_bool,
-	},
-	{
-		.type = SWITCH_TYPE_INT,
 		.name = "untag",
 		.description = "Untag (1:strip outgoing vlan tag)",
 		.max = 1,