ramips: Get rt3050 ethernet ports to be disabled from the device tree.

This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.

Line 444 enables all ethernet ports, so line 487 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not implemented as it will
be sticky disabled in register POC0. Because of this, the code will still read
the switch configuration and OR it to the device tree setting.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 49290

1 files changed, 81 insertions, 0 deletions

diff --git a/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch b/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch
new file mode 100644
index 0000000..f5defe1
--- /dev/null
+++ b/target/linux/ramips/patches-4.4/0518-net-mediatek-get-rt3050-ethernet-ports-to-be-disable.patch
@@ -0,0 +1,81 @@
+From: Vittorio Gambaletta <openwrt@vittgam.net>
+Date: Fri, 01 Jan 2016 00:00:02 +0100
+Subject: [PATCH 3/3] net: mediatek: Get rt3050 ethernet ports to be disabled from the device tree.
+
+This patch allows configuring ports to be disabled in the device tree; this
+saves power, since disabling ports here actually disables power to ethernet
+PHYs.
+
+Line 444 enables all ethernet ports, so line 487 is getting zero ports to be
+disabled, except for port 5 in SoCs where this is not implemented as it will
+be sticky disabled in register POC0. Because of this, the code will still read
+the switch configuration and OR it to the device tree setting.
+
+Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
+---
+
+--- a/drivers/net/ethernet/mediatek/esw_rt3050.c
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
+@@ -10,6 +10,7 @@
+  *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+  *   Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
+  *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ *   Copyright (C) 2016 Vittorio Gambaletta <openwrt@vittgam.net>
+  */
+ 
+ #include <linux/module.h>
+@@ -219,6 +220,7 @@ struct rt305x_esw {
+ 	spinlock_t		reg_rw_lock;
+ 
+ 	unsigned char		port_map;
++	unsigned char		port_disable;
+ 	unsigned int		reg_led_polarity;
+ 
+ 	struct switch_dev	swdev;
+@@ -483,8 +485,14 @@ static void esw_hw_init(struct rt305x_es
+ 	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
+ 	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
+ 
+-	/* Copy disabled port configuration from bootloader setup */
+-	port_disable = esw_get_port_disable(esw);
++	/* Copy disabled port configuration from device tree setup */
++	port_disable = esw->port_disable;
++
++	/* Disable nonexistent ports by reading the switch config
++	 * after having enabled all possible ports above
++	 */
++	port_disable |= esw_get_port_disable(esw);
++
+ 	for (i = 0; i < 6; i++)
+ 		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+ 
+@@ -1330,7 +1338,7 @@ static int esw_probe(struct platform_dev
+ {
+ 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	struct device_node *np = pdev->dev.of_node;
+-	const __be32 *port_map, *reg_init;
++	const __be32 *port_map, *port_disable, *reg_init;
+ 	struct switch_dev *swdev;
+ 	struct rt305x_esw *esw;
+ 	int ret;
+@@ -1349,6 +1357,10 @@ static int esw_probe(struct platform_dev
+ 	if (port_map)
+ 		esw->port_map = be32_to_cpu(*port_map);
+ 
++	port_disable = of_get_property(np, "mediatek,portdisable", NULL);
++	if (port_disable)
++		esw->port_disable = be32_to_cpu(*port_disable);
++
+ 	reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
+ 	if (reg_init)
+ 		esw->reg_led_polarity = be32_to_cpu(*reg_init);
+--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
++++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+@@ -16,6 +16,7 @@ Required properties:
+ Optional properties:
+ - mediatek,portmap: can be used to choose if the default switch setup is
+   llllw or wllll
++- mediatek,portdisable: disable unused ethernet PHYs to save power
+ - mediatek,led_polarity: override the active high/low settings of the leds
+ 
+ Example: