ramips: rt288x: add support for the Belkin F5D8235-4 v1 board

Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617

11 files changed, 184 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 3cd5c0f..9e09e69 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -36,6 +36,9 @@ get_status_led() {
 	esr-9753)
 		status_led="esr-9753:orange:power"
 		;;
+	f5d8235-v1)
+		set_usb_led "f5d8235-v1:green:usb"
+		;;
 	fonera20n)
 		status_led="fonera20n:green:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 47f7f01..259c5d7 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -41,6 +41,7 @@ case "$FIRMWARE" in
 		rt2x00_eeprom_extract "devconf" 0 272
 		;;
 
+	f5d8235-v1 | \
 	f5d8235-v2)
 		rt2x00_eeprom_extract "u-boot" 262144 272
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index f98162c..7e58ef0 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -35,6 +35,7 @@ ramips_setup_interfaces()
 		ucidef_set_interface_lan "eth0"
 		;;
 
+	f5d8235-v1 | \
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -67,6 +68,7 @@ ramips_setup_macs()
 
 	argus-atp52b | \
 	b2c | \
+	f5d8235-v1 | \
 	nw718 | \
 	rt-n15 | \
 	wl-351)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index f05fc3d..0a336ea 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -65,6 +65,9 @@ ramips_board_name() {
 	*"ESR-9753")
 		name="esr-9753"
 		;;
+	*"F5D8235 v1")
+		name="f5d8235-v1"
+		;;
 	*"F5D8235 v2")
 		name="f5d8235-v2"
 		;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index df6adf4..94eb4be 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -14,6 +14,7 @@
 enum ramips_mach_type {
 	RAMIPS_MACH_GENERIC,
 	/* RT2880 based machines */
+	RAMIPS_MACH_F5D8235_V1,		/* Belkin F5D8235 v1 */
 	RAMIPS_MACH_RT_N15,		/* Asus RT-N15 */
 	RAMIPS_MACH_WLI_TX4_AG300N,	/* Buffalo WLI-TX4-AG300N */
 	RAMIPS_MACH_WZR_AGL300NH,	/* Buffalo WZR-AGL300NH */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
index c30b3ad..4189d9e 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
@@ -2,6 +2,10 @@ if RALINK_RT288X
 
 menu "Ralink RT288x machine selection"
 
+config RT288X_MACH_F5D8235_V1
+	bool "Belkin F5D8235 V1 board support"
+	select RALINK_DEV_GPIO_LEDS
+
 config RT288X_MACH_RT_N15
 	bool "Asus RT-N15 board support"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
index ab70701..5205706 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
@@ -13,6 +13,7 @@ obj-y	:= irq.o setup.o rt288x.o devices.o clock.o
 
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 
+obj-$(CONFIG_RT288X_MACH_F5D8235_V1)	+= mach-f5d8235-v1.o
 obj-$(CONFIG_RT288X_MACH_RT_N15)	+= mach-rt-n15.o
 obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
 obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH)	+= mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
new file mode 100644
index 0000000..7db7e6f
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
@@ -0,0 +1,142 @@
+/*
+ *  Belkin F5D825 V1 board support
+ *
+ *  Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+
+#include "devices.h"
+
+#include <linux/rtl8366.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#define F5D8235_GPIO_RTL8366_SCK	2
+#define F5D8235_GPIO_RTL8366_SDA	1
+
+#define F5D8235_GPIO_LED_USB_BLUE	7
+#define F5D8235_GPIO_LED_USB_ORANGE	8
+#define F5D8235_GPIO_BUTTON_WPS		0
+#define F5D8235_GPIO_BUTTON_RESET	9
+
+#define F5D8235_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition f5d8235_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0,
+		.size	= 0x050000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel and rootfs",
+		.offset	= 0x050000,
+		.size	= 0x790000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x1D0000,
+		.size	= 0x610000,
+	}, {
+		.name	= "nvram",
+		.offset	= 0x7E0000,
+		.size	= 0x010000,
+	}, {
+		.name	= "factory",
+		.offset	= 0x7F0000,
+		.size	= 0x010000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data f5d8235_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(f5d8235_partitions),
+	.parts		= f5d8235_partitions,
+#endif
+};
+
+static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
+	.gpio_sda	= F5D8235_GPIO_RTL8366_SDA,
+	.gpio_sck	= F5D8235_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device f5d8235_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &f5d8235_rtl8366s_data,
+	}
+};
+
+static struct gpio_led f5d8235_leds_gpio[] __initdata = {
+	{
+		.name		= "f5d8234-v1:blue:storage",
+		.gpio		= F5D8235_GPIO_LED_USB_BLUE,
+		.active_low	= 1,
+	},{
+		.name		= "f5d8234-v1:orange:storage",
+		.gpio		= F5D8235_GPIO_LED_USB_ORANGE,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button f5d8235_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= F5D8235_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= F5D8235_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init f5d8235_init(void)
+{
+	rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
+
+	rt288x_register_flash(0, &f5d8235_flash_data);
+	rt288x_register_wifi();
+	rt288x_register_wdt();
+
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
+				  f5d8235_leds_gpio);
+
+	ramips_register_gpio_buttons(-1, F5D8235_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(f5d8235_gpio_buttons),
+				     f5d8235_gpio_buttons);
+
+	platform_device_register(&f5d8235_rtl8366s_device);
+
+	rt288x_eth_data.speed = SPEED_1000;
+	rt288x_eth_data.duplex = DUPLEX_FULL;
+	rt288x_eth_data.tx_fc = 1;
+	rt288x_eth_data.rx_fc = 1;
+	rt288x_register_ethernet();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
+	     "Belkin F5D8235 v1", f5d8235_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b661cab..d177c04 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -257,6 +257,10 @@ define Image/Build/Profile/F5D8235V2
 	$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
 endef
 
+define Image/Build/Template/F5D8235V1
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
 
 mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
 mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
@@ -265,7 +269,6 @@ define Image/Build/Profile/WR5123GN
 	$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
 endef
 
-
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
@@ -290,6 +293,9 @@ define Image/Build/Profile/Default
 endef
 endif
 
+define Image/Build/Profile/F5D8235V1
+	$(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
+endef
 
 define Image/Build/Profile/RTN15
 	$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
@@ -302,6 +308,7 @@ endef
 
 ifeq ($(CONFIG_RALINK_RT288X),y)
 define Image/Build/Profile/Default
+	$(call Image/Build/Profile/F5D8235V1,$(1))
 	$(call Image/Build/Profile/RTN15,$(1))
 	$(call Image/Build/Profile/WLITX4AG300N,$(1))
 endef
diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39
index a5fead5..5ad60af 100644
--- a/target/linux/ramips/rt288x/config-2.6.39
+++ b/target/linux/ramips/rt288x/config-2.6.39
@@ -92,6 +92,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 CONFIG_RALINK_RT288X=y
 # CONFIG_RALINK_RT305X is not set
 CONFIG_RAMIPS_WDT=y
+CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y
 CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
diff --git a/target/linux/ramips/rt288x/profiles/belkin.mk b/target/linux/ramips/rt288x/profiles/belkin.mk
new file mode 100644
index 0000000..608cee9
--- /dev/null
+++ b/target/linux/ramips/rt288x/profiles/belkin.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/F5D8235V1
+       NAME:=Belkin F5D8235 V1
+       PACKAGES:=kmod-switch-rtl8366s kmod-swconfig swconfig
+endef
+
+define Profile/F5D8235_V1/Description
+       Package set for Belkin F5D8235 V1
+endef
+
+$(eval $(call Profile,F5D8235V1))
+