ramips: fix gpio base numbering

make banks 0 based to unbreak userland ABI

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36561

1 files changed, 32 insertions, 16 deletions

diff --git a/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch b/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
index 6f44888..e3eeae9 100644
--- a/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
+++ b/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
@@ -17,9 +17,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
  create mode 100644 drivers/gpio/gpio-ralink.c
 
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -449,6 +449,7 @@ config RALINK
+Index: linux-3.8.11/arch/mips/Kconfig
+===================================================================
+--- linux-3.8.11.orig/arch/mips/Kconfig	2013-05-04 13:20:48.399042973 +0200
++++ linux-3.8.11/arch/mips/Kconfig	2013-05-04 13:20:54.963043258 +0200
+@@ -449,6 +449,7 @@
  	select SYS_HAS_EARLY_PRINTK
  	select HAVE_MACH_CLKDEV
  	select CLKDEV_LOOKUP
@@ -27,8 +29,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  config SGI_IP22
  	bool "SGI IP22 (Indy/Indigo2)"
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
+Index: linux-3.8.11/arch/mips/include/asm/mach-ralink/gpio.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.8.11/arch/mips/include/asm/mach-ralink/gpio.h	2013-05-04 13:20:54.963043258 +0200
 @@ -0,0 +1,24 @@
 +/*
 + *  Ralink SoC GPIO API support
@@ -54,9 +58,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#define gpio_to_irq	__gpio_to_irq
 +
 +#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -201,6 +201,12 @@ config GPIO_PXA
+Index: linux-3.8.11/drivers/gpio/Kconfig
+===================================================================
+--- linux-3.8.11.orig/drivers/gpio/Kconfig	2013-05-04 13:20:48.399042973 +0200
++++ linux-3.8.11/drivers/gpio/Kconfig	2013-05-04 13:20:54.963043258 +0200
+@@ -201,6 +201,12 @@
  	help
  	  Say yes here to support the PXA GPIO device
  
@@ -69,9 +75,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  config GPIO_SPEAR_SPICS
  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
  	depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf85
+Index: linux-3.8.11/drivers/gpio/Makefile
+===================================================================
+--- linux-3.8.11.orig/drivers/gpio/Makefile	2013-05-04 13:20:48.399042973 +0200
++++ linux-3.8.11/drivers/gpio/Makefile	2013-05-04 13:20:54.963043258 +0200
+@@ -54,6 +54,7 @@
  obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
  obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
  obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
@@ -79,9 +87,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
  obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
  obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,176 @@
+Index: linux-3.8.11/drivers/gpio/gpio-ralink.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.8.11/drivers/gpio/gpio-ralink.c	2013-05-06 11:39:24.816485479 +0200
+@@ -0,0 +1,182 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License version 2 as published
@@ -189,6 +199,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 +	struct ralink_gpio_chip *gc;
 +	const __be32 *ngpio;
++	const __be32 *gpiobase;
 +
 +	if (!res) {
 +		dev_err(&pdev->dev, "failed to find resource\n");
@@ -218,17 +229,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +		return -EINVAL;
 +	}
 +
-+	spin_lock_init(&gc->lock);
++	gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++	if (gpiobase)
++		gc->chip.base = be32_to_cpu(*gpiobase);
++	else
++		gc->chip.base = -1;
 +
 +	gc->chip.label = dev_name(&pdev->dev);
 +	gc->chip.of_node = np;
-+	gc->chip.base = -1;
 +	gc->chip.ngpio = be32_to_cpu(*ngpio);
 +	gc->chip.direction_input = ralink_gpio_direction_input;
 +	gc->chip.direction_output = ralink_gpio_direction_output;
 +	gc->chip.get = ralink_gpio_get;
 +	gc->chip.set = ralink_gpio_set;
 +
++	spin_lock_init(&gc->lock);
++
 +	/* set polarity to low for all lines */
 +	rt_gpio_w32(gc, GPIO_REG_POL, 0);
 +