summaryrefslogtreecommitdiff
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-12-17 09:25:24 +0000
committerJohn Crispin <john@openwrt.org>2015-12-17 09:25:24 +0000
commit31116661ff8c33f002d457c9945616df01b138c1 (patch)
tree0735bd55e5bc9b19d991a5cbb59404f0261b4847 /target/linux/ramips
parenta99c78a09ac39c80e6a4a0b3eb8daca3bbb3806c (diff)
downloadmtk-20170518-31116661ff8c33f002d457c9945616df01b138c1.zip
mtk-20170518-31116661ff8c33f002d457c9945616df01b138c1.tar.gz
mtk-20170518-31116661ff8c33f002d457c9945616df01b138c1.tar.bz2
ralink: add reworked ethernet driver
update to the version of the driver that is on its way upstream Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47898
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch24
-rw-r--r--target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch162
-rw-r--r--target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch2756
-rw-r--r--target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch700
-rw-r--r--target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch403
-rw-r--r--target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch307
-rw-r--r--target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch363
-rw-r--r--target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch229
-rw-r--r--target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch100
-rw-r--r--target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch528
-rw-r--r--target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch214
-rw-r--r--target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch140
-rw-r--r--target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch93
-rw-r--r--target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch906
-rw-r--r--target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch913
-rw-r--r--target/linux/ramips/patches-4.3/0600-net-mediatek-add-of_get_mac_address_mtd-support.patch36
-rw-r--r--target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch27
17 files changed, 7877 insertions, 24 deletions
diff --git a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
index e9f405d..69b2f60 100644
--- a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -24,30 +24,6 @@ index 51f33a5..d7c4ba4 100644
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
-diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
-index 05aa759..5628f2d 100644
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -154,6 +154,7 @@ source "drivers/net/ethernet/packetengines/Kconfig"
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/qualcomm/Kconfig"
-+source "drivers/net/ethernet/ralink/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
-diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
-index ddfc808..cbfe95e 100644
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
-+obj-$(CONFIG_NET_RALINK) += ralink/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
--
1.7.10.4
diff --git a/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch b/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch
new file mode 100644
index 0000000..46e4f5b
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch
@@ -0,0 +1,162 @@
+From 9c2487f148ee38807d86beaf12dc2b818a764a99 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 17 Nov 2015 00:20:07 +0100
+Subject: [PATCH 500/513] Documentation: DT: net: add docs for ralink/mediatek
+ SoC ethernet binding
+
+Add three files. ralink,rt2880-net.txt descibes the actual frame engine
+and the other two describe the switch forntend bindings.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+Cc: devicetree@vger.kernel.org
+---
+ .../bindings/net/mediatek,mt7620-gsw.txt | 26 +++++++++
+ .../devicetree/bindings/net/ralink,rt2880-net.txt | 61 ++++++++++++++++++++
+ .../devicetree/bindings/net/ralink,rt3050-esw.txt | 32 ++++++++++
+ 3 files changed, 119 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+ create mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+ create mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+
+diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+new file mode 100644
+index 0000000..fb47d8e
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+@@ -0,0 +1,26 @@
++Mediatek Gigabit Switch
++=======================
++
++The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
++
++Required properties:
++- compatible: Should be "mediatek,mt7620-gsw"
++- reg: Address and length of the register set for the device
++- interrupt-parent: Should be the phandle for the interrupt controller
++ that services interrupts for this device
++- interrupts: Should contain the gigabit switches interrupt
++- resets: Should contain the gigabit switches resets
++- reset-names: Should contain the reset names "gsw"
++
++Example:
++
++gsw@10110000 {
++ compatible = "ralink,mt7620-gsw";
++ reg = <0x10110000 8000>;
++
++ resets = <&rstctrl 23>;
++ reset-names = "gsw";
++
++ interrupt-parent = <&intc>;
++ interrupts = <17>;
++};
+diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+new file mode 100644
+index 0000000..88b095d
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+@@ -0,0 +1,61 @@
++Ralink Frame Engine Ethernet controller
++=======================================
++
++The Ralink frame engine ethernet controller can be found on Ralink and
++Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
++
++Depending on the SoC, there is a number of ports connected to the CPU port
++directly and/or via a (gigabit-)switch.
++
++* Ethernet controller node
++
++Required properties:
++- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
++ "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
++ "mediatek,mt7620-eth", "mediatek,mt7621-eth"
++- reg: Address and length of the register set for the device
++- interrupt-parent: Should be the phandle for the interrupt controller
++ that services interrupts for this device
++- interrupts: Should contain the frame engines interrupt
++- resets: Should contain the frame engines resets
++- reset-names: Should contain the reset names "fe". If a switch is present
++ "esw" is also required.
++
++
++* Ethernet port node
++
++Required properties:
++- compatible: Should be "ralink,eth-port"
++- reg: The number of the physical port
++- phy-handle: reference to the node describing the phy
++
++Example:
++
++mdio-bus {
++ ...
++ phy0: ethernet-phy@0 {
++ phy-mode = "mii";
++ reg = <0>;
++ };
++};
++
++ethernet@400000 {
++ compatible = "ralink,rt2880-eth";
++ reg = <0x00400000 10000>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "fe";
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <5>;
++
++ port@0 {
++ compatible = "ralink,eth-port";
++ reg = <0>;
++ phy-handle = <&phy0>;
++ };
++
++};
+diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+new file mode 100644
+index 0000000..ed32e21
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+@@ -0,0 +1,32 @@
++Ralink Fast Ethernet Embedded Switch
++====================================
++
++The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
++SoCs (RT3x5x, rt5350, mt76x8).
++
++Required properties:
++- compatible: Should be "ralink,rt3050-esw"
++- reg: Address and length of the register set for the device
++- interrupt-parent: Should be the phandle for the interrupt controller
++ that services interrupts for this device
++- interrupts: Should contain the embedded switches interrupt
++- resets: Should contain the embedded switches resets
++- reset-names: Should contain the reset names "esw"
++
++Optional properties:
++- ralink,portmap: can be used to choose if the default switch setup is
++ llllw or wllll
++- ralink,led_polarity: override the active high/low settings of the leds
++
++Example:
++
++esw@10110000 {
++ compatible = "ralink,rt3050-esw";
++ reg = <0x10110000 8000>;
++
++ resets = <&rstctrl 23>;
++ reset-names = "esw";
++
++ interrupt-parent = <&intc>;
++ interrupts = <17>;
++};
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch b/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch
new file mode 100644
index 0000000..c012a8d
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch
@@ -0,0 +1,2756 @@
+From 2abe91b53ca4d2528ef1fc9c44c6e69f8c805776 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 18 Nov 2015 03:12:19 +0100
+Subject: [PATCH 501/513] net-next: mediatek: add the drivers core files
+
+This patch adds the main chunk of the driver. The ethernet core is used in all
+of the Mediatek/Ralink Wireless SoCs. Over the years we have seen verious
+changes to
+
+* the register layout
+* the type of ports (single/dual gbit, internal FE/Gbit switch)
+* dma engine
+
+and new offloading features were added, such as
+
+* checksum
+* vlan tx/rx
+* gso
+* lro
+
+However the core functionality has remained the sama allowing us to use the
+same core for all SoCs.
+
+The abstraction for the various SoCs uses the typical ops struct pattern which
+allows us to extend or override the cores functionality depending on which SoC
+we are on. The code to bring up the switches and external ports has also been
+split into separate files.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/ethtool.c | 235 ++++
+ drivers/net/ethernet/mediatek/ethtool.h | 22 +
+ drivers/net/ethernet/mediatek/mdio.c | 258 +++++
+ drivers/net/ethernet/mediatek/mdio.h | 27 +
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1607 +++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/mtk_eth_soc.h | 522 +++++++++
+ 6 files changed, 2671 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/ethtool.c
+ create mode 100644 drivers/net/ethernet/mediatek/ethtool.h
+ create mode 100644 drivers/net/ethernet/mediatek/mdio.c
+ create mode 100644 drivers/net/ethernet/mediatek/mdio.h
+ create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.c
+ create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.h
+
+diff --git a/drivers/net/ethernet/mediatek/ethtool.c b/drivers/net/ethernet/mediatek/ethtool.c
+new file mode 100644
+index 0000000..697cd80
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/ethtool.c
+@@ -0,0 +1,235 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include "mtk_eth_soc.h"
++
++static const char fe_gdma_str[][ETH_GSTRING_LEN] = {
++#define _FE(x...) # x,
++FE_STAT_REG_DECLARE
++#undef _FE
++};
++
++static int fe_get_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ int err;
++
++ if (!priv->phy_dev)
++ goto out_gset;
++
++ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
++ err = phy_read_status(priv->phy_dev);
++ if (err)
++ goto out_gset;
++ }
++
++ return phy_ethtool_gset(priv->phy_dev, cmd);
++
++out_gset:
++ return -ENODEV;
++}
++
++static int fe_set_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (!priv->phy_dev)
++ goto out_sset;
++
++ if (cmd->phy_address != priv->phy_dev->addr) {
++ if (priv->phy->phy_node[cmd->phy_address]) {
++ priv->phy_dev = priv->phy->phy[cmd->phy_address];
++ priv->phy_flags = FE_PHY_FLAG_PORT;
++ } else if (priv->mii_bus &&
++ priv->mii_bus->phy_map[cmd->phy_address]) {
++ priv->phy_dev =
++ priv->mii_bus->phy_map[cmd->phy_address];
++ priv->phy_flags = FE_PHY_FLAG_ATTACH;
++ } else {
++ goto out_sset;
++ }
++ }
++
++ return phy_ethtool_sset(priv->phy_dev, cmd);
++
++out_sset:
++ return -ENODEV;
++}
++
++static void fe_get_drvinfo(struct net_device *dev,
++ struct ethtool_drvinfo *info)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct fe_soc_data *soc = priv->soc;
++
++ strlcpy(info->driver, priv->device->driver->name, sizeof(info->driver));
++ strlcpy(info->version, MTK_FE_DRV_VERSION, sizeof(info->version));
++ strlcpy(info->bus_info, dev_name(priv->device), sizeof(info->bus_info));
++
++ if (soc->reg_table[FE_REG_FE_COUNTER_BASE])
++ info->n_stats = ARRAY_SIZE(fe_gdma_str);
++}
++
++static u32 fe_get_msglevel(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ return priv->msg_enable;
++}
++
++static void fe_set_msglevel(struct net_device *dev, u32 value)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ priv->msg_enable = value;
++}
++
++static int fe_nway_reset(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (!priv->phy_dev)
++ goto out_nway_reset;
++
++ return genphy_restart_aneg(priv->phy_dev);
++
++out_nway_reset:
++ return -EOPNOTSUPP;
++}
++
++static u32 fe_get_link(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ int err;
++
++ if (!priv->phy_dev)
++ goto out_get_link;
++
++ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
++ err = genphy_update_link(priv->phy_dev);
++ if (err)
++ goto out_get_link;
++ }
++
++ return priv->phy_dev->link;
++
++out_get_link:
++ return ethtool_op_get_link(dev);
++}
++
++static int fe_set_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *ring)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if ((ring->tx_pending < 2) ||
++ (ring->rx_pending < 2) ||
++ (ring->rx_pending > MAX_DMA_DESC) ||
++ (ring->tx_pending > MAX_DMA_DESC))
++ return -EINVAL;
++
++ dev->netdev_ops->ndo_stop(dev);
++
++ priv->tx_ring.tx_ring_size = BIT(fls(ring->tx_pending) - 1);
++ priv->rx_ring.rx_ring_size = BIT(fls(ring->rx_pending) - 1);
++
++ dev->netdev_ops->ndo_open(dev);
++
++ return 0;
++}
++
++static void fe_get_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *ring)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ ring->rx_max_pending = MAX_DMA_DESC;
++ ring->tx_max_pending = MAX_DMA_DESC;
++ ring->rx_pending = priv->rx_ring.rx_ring_size;
++ ring->tx_pending = priv->tx_ring.tx_ring_size;
++}
++
++static void fe_get_strings(struct net_device *dev, u32 stringset, u8 *data)
++{
++ switch (stringset) {
++ case ETH_SS_STATS:
++ memcpy(data, *fe_gdma_str, sizeof(fe_gdma_str));
++ break;
++ }
++}
++
++static int fe_get_sset_count(struct net_device *dev, int sset)
++{
++ switch (sset) {
++ case ETH_SS_STATS:
++ return ARRAY_SIZE(fe_gdma_str);
++ default:
++ return -EOPNOTSUPP;
++ }
++}
++
++static void fe_get_ethtool_stats(struct net_device *dev,
++ struct ethtool_stats *stats, u64 *data)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct fe_hw_stats *hwstats = priv->hw_stats;
++ u64 *data_src, *data_dst;
++ unsigned int start;
++ int i;
++
++ if (netif_running(dev) && netif_device_present(dev)) {
++ if (spin_trylock(&hwstats->stats_lock)) {
++ fe_stats_update(priv);
++ spin_unlock(&hwstats->stats_lock);
++ }
++ }
++
++ do {
++ data_src = &hwstats->tx_bytes;
++ data_dst = data;
++ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
++
++ for (i = 0; i < ARRAY_SIZE(fe_gdma_str); i++)
++ *data_dst++ = *data_src++;
++
++ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
++}
++
++static struct ethtool_ops fe_ethtool_ops = {
++ .get_settings = fe_get_settings,
++ .set_settings = fe_set_settings,
++ .get_drvinfo = fe_get_drvinfo,
++ .get_msglevel = fe_get_msglevel,
++ .set_msglevel = fe_set_msglevel,
++ .nway_reset = fe_nway_reset,
++ .get_link = fe_get_link,
++ .set_ringparam = fe_set_ringparam,
++ .get_ringparam = fe_get_ringparam,
++};
++
++void fe_set_ethtool_ops(struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++ struct fe_soc_data *soc = priv->soc;
++
++ if (soc->reg_table[FE_REG_FE_COUNTER_BASE]) {
++ fe_ethtool_ops.get_strings = fe_get_strings;
++ fe_ethtool_ops.get_sset_count = fe_get_sset_count;
++ fe_ethtool_ops.get_ethtool_stats = fe_get_ethtool_stats;
++ }
++
++ netdev->ethtool_ops = &fe_ethtool_ops;
++}
+diff --git a/drivers/net/ethernet/mediatek/ethtool.h b/drivers/net/ethernet/mediatek/ethtool.h
+new file mode 100644
+index 0000000..955b84f
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/ethtool.h
+@@ -0,0 +1,22 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef FE_ETHTOOL_H
++#define FE_ETHTOOL_H
++
++#include <linux/ethtool.h>
++
++void fe_set_ethtool_ops(struct net_device *netdev);
++
++#endif /* FE_ETHTOOL_H */
+diff --git a/drivers/net/ethernet/mediatek/mdio.c b/drivers/net/ethernet/mediatek/mdio.c
+new file mode 100644
+index 0000000..169c937
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mdio.c
+@@ -0,0 +1,258 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/phy.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio.h"
++
++static int fe_mdio_reset(struct mii_bus *bus)
++{
++ /* TODO */
++ return 0;
++}
++
++static void fe_phy_link_adjust(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ for (i = 0; i < 8; i++) {
++ if (priv->phy->phy_node[i]) {
++ struct phy_device *phydev = priv->phy->phy[i];
++ int status_change = 0;
++
++ if (phydev->link)
++ if (priv->phy->duplex[i] != phydev->duplex ||
++ priv->phy->speed[i] != phydev->speed)
++ status_change = 1;
++
++ if (phydev->link != priv->link[i])
++ status_change = 1;
++
++ switch (phydev->speed) {
++ case SPEED_1000:
++ case SPEED_100:
++ case SPEED_10:
++ priv->link[i] = phydev->link;
++ priv->phy->duplex[i] = phydev->duplex;
++ priv->phy->speed[i] = phydev->speed;
++
++ if (status_change &&
++ priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ break;
++ }
++ }
++ }
++}
++
++int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
++{
++ const __be32 *_port = NULL;
++ struct phy_device *phydev;
++ int phy_mode, port;
++
++ _port = of_get_property(phy_node, "reg", NULL);
++
++ if (!_port || (be32_to_cpu(*_port) >= 0x20)) {
++ pr_err("%s: invalid port id\n", phy_node->name);
++ return -EINVAL;
++ }
++ port = be32_to_cpu(*_port);
++ phy_mode = of_get_phy_mode(phy_node);
++ if (phy_mode < 0) {
++ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
++ priv->phy->phy_node[port] = NULL;
++ return -EINVAL;
++ }
++
++ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
++ 0, phy_mode);
++ if (IS_ERR(phydev)) {
++ dev_err(priv->device, "could not connect to PHY\n");
++ priv->phy->phy_node[port] = NULL;
++ return PTR_ERR(phydev);
++ }
++
++ phydev->supported &= PHY_GBIT_FEATURES;
++ phydev->advertising = phydev->supported;
++
++ dev_info(priv->device,
++ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
++ port, dev_name(&phydev->dev), phydev->phy_id,
++ phydev->drv->name);
++
++ priv->phy->phy[port] = phydev;
++ priv->link[port] = 0;
++
++ return 0;
++}
++
++static void phy_init(struct fe_priv *priv, struct phy_device *phy)
++{
++ phy_attach(priv->netdev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII);
++
++ phy->autoneg = AUTONEG_ENABLE;
++ phy->speed = 0;
++ phy->duplex = 0;
++ phy->supported &= PHY_BASIC_FEATURES;
++ phy->advertising = phy->supported | ADVERTISED_Autoneg;
++
++ phy_start_aneg(phy);
++}
++
++static int fe_phy_connect(struct fe_priv *priv)
++{
++ int i;
++
++ for (i = 0; i < 8; i++) {
++ if (priv->phy->phy_node[i]) {
++ if (!priv->phy_dev) {
++ priv->phy_dev = priv->phy->phy[i];
++ priv->phy_flags = FE_PHY_FLAG_PORT;
++ }
++ } else if (priv->mii_bus && priv->mii_bus->phy_map[i]) {
++ phy_init(priv, priv->mii_bus->phy_map[i]);
++ if (!priv->phy_dev) {
++ priv->phy_dev = priv->mii_bus->phy_map[i];
++ priv->phy_flags = FE_PHY_FLAG_ATTACH;
++ }
++ }
++ }
++
++ return 0;
++}
++
++static void fe_phy_disconnect(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++)
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 0;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_disconnect(priv->phy->phy[i]);
++ } else if (priv->mii_bus && priv->mii_bus->phy_map[i]) {
++ phy_detach(priv->mii_bus->phy_map[i]);
++ }
++}
++
++static void fe_phy_start(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++) {
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 1;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_start(priv->phy->phy[i]);
++ }
++ }
++}
++
++static void fe_phy_stop(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++)
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 0;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_stop(priv->phy->phy[i]);
++ }
++}
++
++static struct fe_phy phy_ralink = {
++ .connect = fe_phy_connect,
++ .disconnect = fe_phy_disconnect,
++ .start = fe_phy_start,
++ .stop = fe_phy_stop,
++};
++
++int fe_mdio_init(struct fe_priv *priv)
++{
++ struct device_node *mii_np;
++ int err;
++
++ if (!priv->soc->mdio_read || !priv->soc->mdio_write)
++ return 0;
++
++ spin_lock_init(&phy_ralink.lock);
++ priv->phy = &phy_ralink;
++
++ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
++ if (!mii_np) {
++ dev_err(priv->device, "no %s child node found", "mdio-bus");
++ return -ENODEV;
++ }
++
++ if (!of_device_is_available(mii_np)) {
++ err = 0;
++ goto err_put_node;
++ }
++
++ priv->mii_bus = mdiobus_alloc();
++ if (!priv->mii_bus) {
++ err = -ENOMEM;
++ goto err_put_node;
++ }
++
++ priv->mii_bus->name = "mdio";
++ priv->mii_bus->read = priv->soc->mdio_read;
++ priv->mii_bus->write = priv->soc->mdio_write;
++ priv->mii_bus->reset = fe_mdio_reset;
++ priv->mii_bus->priv = priv;
++ priv->mii_bus->parent = priv->device;
++
++ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
++ err = of_mdiobus_register(priv->mii_bus, mii_np);
++ if (err)
++ goto err_free_bus;
++
++ return 0;
++
++err_free_bus:
++ kfree(priv->mii_bus);
++err_put_node:
++ of_node_put(mii_np);
++ priv->mii_bus = NULL;
++ return err;
++}
++
++void fe_mdio_cleanup(struct fe_priv *priv)
++{
++ if (!priv->mii_bus)
++ return;
++
++ mdiobus_unregister(priv->mii_bus);
++ of_node_put(priv->mii_bus->dev.of_node);
++ kfree(priv->mii_bus);
++}
+diff --git a/drivers/net/ethernet/mediatek/mdio.h b/drivers/net/ethernet/mediatek/mdio.h
+new file mode 100644
+index 0000000..b7d4a24
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mdio.h
+@@ -0,0 +1,27 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef _RALINK_MDIO_H__
++#define _RALINK_MDIO_H__
++
++#ifdef CONFIG_NET_MEDIATEK_MDIO
++int fe_mdio_init(struct fe_priv *priv);
++void fe_mdio_cleanup(struct fe_priv *priv);
++int fe_connect_phy_node(struct fe_priv *priv,
++ struct device_node *phy_node);
++#else
++static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
++static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
++#endif
++#endif
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+new file mode 100644
+index 0000000..dae7147
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -0,0 +1,1607 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/if_vlan.h>
++#include <linux/reset.h>
++#include <linux/tcp.h>
++#include <linux/io.h>
++#include <linux/bug.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio.h"
++#include "ethtool.h"
++
++#define MAX_RX_LENGTH 1536
++#define FE_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
++#define FE_RX_HLEN (NET_SKB_PAD + FE_RX_ETH_HLEN + NET_IP_ALIGN)
++#define DMA_DUMMY_DESC 0xffffffff
++#define FE_DEFAULT_MSG_ENABLE \
++ (NETIF_MSG_DRV | \
++ NETIF_MSG_PROBE | \
++ NETIF_MSG_LINK | \
++ NETIF_MSG_TIMER | \
++ NETIF_MSG_IFDOWN | \
++ NETIF_MSG_IFUP | \
++ NETIF_MSG_RX_ERR | \
++ NETIF_MSG_TX_ERR)
++
++#define TX_DMA_DESP2_DEF (TX_DMA_LS0 | TX_DMA_DONE)
++#define TX_DMA_DESP4_DEF (TX_DMA_QN(3) | TX_DMA_PN(1))
++#define NEXT_TX_DESP_IDX(X) (((X) + 1) & (ring->tx_ring_size - 1))
++#define NEXT_RX_DESP_IDX(X) (((X) + 1) & (ring->rx_ring_size - 1))
++
++#define SYSC_REG_RSTCTRL 0x34
++
++static int fe_msg_level = -1;
++module_param_named(msg_level, fe_msg_level, int, 0);
++MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
++
++static const u16 fe_reg_table_default[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
++ [FE_REG_TX_DTX_IDX0] = FE_TX_DTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
++ [FE_REG_RX_DRX_IDX0] = FE_RX_DRX_IDX0,
++ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
++ [FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0,
++ [FE_REG_FE_COUNTER_BASE] = FE_GDMA1_TX_GBCNT,
++ [FE_REG_FE_RST_GL] = FE_FE_RST_GL,
++};
++
++static const u16 *fe_reg_table = fe_reg_table_default;
++
++struct fe_work_t {
++ int bitnr;
++ void (*action)(struct fe_priv *);
++};
++
++static void __iomem *fe_base;
++
++void fe_w32(u32 val, unsigned reg)
++{
++ __raw_writel(val, fe_base + reg);
++}
++
++u32 fe_r32(unsigned reg)
++{
++ return __raw_readl(fe_base + reg);
++}
++
++void fe_reg_w32(u32 val, enum fe_reg reg)
++{
++ fe_w32(val, fe_reg_table[reg]);
++}
++
++u32 fe_reg_r32(enum fe_reg reg)
++{
++ return fe_r32(fe_reg_table[reg]);
++}
++
++void fe_reset(u32 reset_bits)
++{
++ u32 t;
++
++ t = rt_sysc_r32(SYSC_REG_RSTCTRL);
++ t |= reset_bits;
++ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
++ usleep_range(10, 20);
++
++ t &= ~reset_bits;
++ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
++ usleep_range(10, 20);
++}
++
++static inline void fe_int_disable(u32 mask)
++{
++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
++ FE_REG_FE_INT_ENABLE);
++ /* flush write */
++ fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_int_enable(u32 mask)
++{
++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
++ FE_REG_FE_INT_ENABLE);
++ /* flush write */
++ fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ FE_GDMA1_MAC_ADRL);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static int fe_set_mac_address(struct net_device *dev, void *p)
++{
++ int ret = eth_mac_addr(dev, p);
++
++ if (!ret) {
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (priv->soc->set_mac)
++ priv->soc->set_mac(priv, dev->dev_addr);
++ else
++ fe_hw_set_macaddr(priv, p);
++ }
++
++ return ret;
++}
++
++static inline int fe_max_frag_size(int mtu)
++{
++ /* make sure buf_size will be at least MAX_RX_LENGTH */
++ if (mtu + FE_RX_ETH_HLEN < MAX_RX_LENGTH)
++ mtu = MAX_RX_LENGTH - FE_RX_ETH_HLEN;
++
++ return SKB_DATA_ALIGN(FE_RX_HLEN + mtu) +
++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
++}
++
++static inline int fe_max_buf_size(int frag_size)
++{
++ int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN -
++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
++
++ BUG_ON(buf_size < MAX_RX_LENGTH);
++ return buf_size;
++}
++
++static inline void fe_get_rxd(struct fe_rx_dma *rxd, struct fe_rx_dma *dma_rxd)
++{
++ rxd->rxd1 = dma_rxd->rxd1;
++ rxd->rxd2 = dma_rxd->rxd2;
++ rxd->rxd3 = dma_rxd->rxd3;
++ rxd->rxd4 = dma_rxd->rxd4;
++}
++
++static inline void fe_set_txd(struct fe_tx_dma *txd, struct fe_tx_dma *dma_txd)
++{
++ dma_txd->txd1 = txd->txd1;
++ dma_txd->txd3 = txd->txd3;
++ dma_txd->txd4 = txd->txd4;
++ /* clean dma done flag last */
++ dma_txd->txd2 = txd->txd2;
++}
++
++static void fe_clean_rx(struct fe_priv *priv)
++{
++ int i;
++ struct fe_rx_ring *ring = &priv->rx_ring;
++
++ if (ring->rx_data) {
++ for (i = 0; i < ring->rx_ring_size; i++)
++ if (ring->rx_data[i]) {
++ if (ring->rx_dma && ring->rx_dma[i].rxd1)
++ dma_unmap_single(&priv->netdev->dev,
++ ring->rx_dma[i].rxd1,
++ ring->rx_buf_size,
++ DMA_FROM_DEVICE);
++ put_page(virt_to_head_page(ring->rx_data[i]));
++ }
++
++ kfree(ring->rx_data);
++ ring->rx_data = NULL;
++ }
++
++ if (ring->rx_dma) {
++ dma_free_coherent(&priv->netdev->dev,
++ ring->rx_ring_size * sizeof(*ring->rx_dma),
++ ring->rx_dma,
++ ring->rx_phys);
++ ring->rx_dma = NULL;
++ }
++}
++
++static int fe_alloc_rx(struct fe_priv *priv)
++{
++ struct net_device *netdev = priv->netdev;
++ struct fe_rx_ring *ring = &priv->rx_ring;
++ int i, pad;
++
++ ring->rx_data = kcalloc(ring->rx_ring_size, sizeof(*ring->rx_data),
++ GFP_KERNEL);
++ if (!ring->rx_data)
++ goto no_rx_mem;
++
++ for (i = 0; i < ring->rx_ring_size; i++) {
++ ring->rx_data[i] = netdev_alloc_frag(ring->frag_size);
++ if (!ring->rx_data[i])
++ goto no_rx_mem;
++ }
++
++ ring->rx_dma = dma_alloc_coherent(&netdev->dev,
++ ring->rx_ring_size * sizeof(*ring->rx_dma),
++ &ring->rx_phys,
++ GFP_ATOMIC | __GFP_ZERO);
++ if (!ring->rx_dma)
++ goto no_rx_mem;
++
++ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
++ pad = 0;
++ else
++ pad = NET_IP_ALIGN;
++ for (i = 0; i < ring->rx_ring_size; i++) {
++ dma_addr_t dma_addr = dma_map_single(&netdev->dev,
++ ring->rx_data[i] + NET_SKB_PAD + pad,
++ ring->rx_buf_size,
++ DMA_FROM_DEVICE);
++ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr)))
++ goto no_rx_mem;
++ ring->rx_dma[i].rxd1 = (unsigned int)dma_addr;
++
++ if (priv->flags & FE_FLAG_RX_SG_DMA)
++ ring->rx_dma[i].rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
++ else
++ ring->rx_dma[i].rxd2 = RX_DMA_LSO;
++ }
++ ring->rx_calc_idx = ring->rx_ring_size - 1;
++ /* make sure that all changes to the dma ring are flushed before we
++ * continue
++ */
++ wmb();
++
++ fe_reg_w32(ring->rx_phys, FE_REG_RX_BASE_PTR0);
++ fe_reg_w32(ring->rx_ring_size, FE_REG_RX_MAX_CNT0);
++ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
++ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
++
++ return 0;
++
++no_rx_mem:
++ return -ENOMEM;
++}
++
++static void fe_txd_unmap(struct device *dev, struct fe_tx_buf *tx_buf)
++{
++ if (tx_buf->flags & FE_TX_FLAGS_SINGLE0) {
++ dma_unmap_single(dev,
++ dma_unmap_addr(tx_buf, dma_addr0),
++ dma_unmap_len(tx_buf, dma_len0),
++ DMA_TO_DEVICE);
++ } else if (tx_buf->flags & FE_TX_FLAGS_PAGE0) {
++ dma_unmap_page(dev,
++ dma_unmap_addr(tx_buf, dma_addr0),
++ dma_unmap_len(tx_buf, dma_len0),
++ DMA_TO_DEVICE);
++ }
++ if (tx_buf->flags & FE_TX_FLAGS_PAGE1)
++ dma_unmap_page(dev,
++ dma_unmap_addr(tx_buf, dma_addr1),
++ dma_unmap_len(tx_buf, dma_len1),
++ DMA_TO_DEVICE);
++
++ tx_buf->flags = 0;
++ if (tx_buf->skb && (tx_buf->skb != (struct sk_buff *)DMA_DUMMY_DESC))
++ dev_kfree_skb_any(tx_buf->skb);
++ tx_buf->skb = NULL;
++}
++
++static void fe_clean_tx(struct fe_priv *priv)
++{
++ int i;
++ struct device *dev = &priv->netdev->dev;
++ struct fe_tx_ring *ring = &priv->tx_ring;
++
++ if (ring->tx_buf) {
++ for (i = 0; i < ring->tx_ring_size; i++)
++ fe_txd_unmap(dev, &ring->tx_buf[i]);
++ kfree(ring->tx_buf);
++ ring->tx_buf = NULL;
++ }
++
++ if (ring->tx_dma) {
++ dma_free_coherent(dev,
++ ring->tx_ring_size * sizeof(*ring->tx_dma),
++ ring->tx_dma,
++ ring->tx_phys);
++ ring->tx_dma = NULL;
++ }
++
++ netdev_reset_queue(priv->netdev);
++}
++
++static int fe_alloc_tx(struct fe_priv *priv)
++{
++ int i;
++ struct fe_tx_ring *ring = &priv->tx_ring;
++
++ ring->tx_free_idx = 0;
++ ring->tx_next_idx = 0;
++ ring->tx_thresh = max((unsigned long)ring->tx_ring_size >> 2,
++ MAX_SKB_FRAGS);
++
++ ring->tx_buf = kcalloc(ring->tx_ring_size, sizeof(*ring->tx_buf),
++ GFP_KERNEL);
++ if (!ring->tx_buf)
++ goto no_tx_mem;
++
++ ring->tx_dma = dma_alloc_coherent(&priv->netdev->dev,
++ ring->tx_ring_size * sizeof(*ring->tx_dma),
++ &ring->tx_phys,
++ GFP_ATOMIC | __GFP_ZERO);
++ if (!ring->tx_dma)
++ goto no_tx_mem;
++
++ for (i = 0; i < ring->tx_ring_size; i++) {
++ if (priv->soc->tx_dma)
++ priv->soc->tx_dma(&ring->tx_dma[i]);
++ ring->tx_dma[i].txd2 = TX_DMA_DESP2_DEF;
++ }
++ /* make sure that all changes to the dma ring are flushed before we
++ * continue
++ */
++ wmb();
++
++ fe_reg_w32(ring->tx_phys, FE_REG_TX_BASE_PTR0);
++ fe_reg_w32(ring->tx_ring_size, FE_REG_TX_MAX_CNT0);
++ fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
++ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
++
++ return 0;
++
++no_tx_mem:
++ return -ENOMEM;
++}
++
++static int fe_init_dma(struct fe_priv *priv)
++{
++ int err;
++
++ err = fe_alloc_tx(priv);
++ if (err)
++ return err;
++
++ err = fe_alloc_rx(priv);
++ if (err)
++ return err;
++
++ return 0;
++}
++
++static void fe_free_dma(struct fe_priv *priv)
++{
++ fe_clean_tx(priv);
++ fe_clean_rx(priv);
++}
++
++void fe_stats_update(struct fe_priv *priv)
++{
++ struct fe_hw_stats *hwstats = priv->hw_stats;
++ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
++ u64 stats;
++
++ u64_stats_update_begin(&hwstats->syncp);
++
++ if (IS_ENABLED(CONFIG_SOC_MT7621)) {
++ hwstats->rx_bytes += fe_r32(base);
++ stats = fe_r32(base + 0x04);
++ if (stats)
++ hwstats->rx_bytes += (stats << 32);
++ hwstats->rx_packets += fe_r32(base + 0x08);
++ hwstats->rx_overflow += fe_r32(base + 0x10);
++ hwstats->rx_fcs_errors += fe_r32(base + 0x14);
++ hwstats->rx_short_errors += fe_r32(base + 0x18);
++ hwstats->rx_long_errors += fe_r32(base + 0x1c);
++ hwstats->rx_checksum_errors += fe_r32(base + 0x20);
++ hwstats->rx_flow_control_packets += fe_r32(base + 0x24);
++ hwstats->tx_skip += fe_r32(base + 0x28);
++ hwstats->tx_collisions += fe_r32(base + 0x2c);
++ hwstats->tx_bytes += fe_r32(base + 0x30);
++ stats = fe_r32(base + 0x34);
++ if (stats)
++ hwstats->tx_bytes += (stats << 32);
++ hwstats->tx_packets += fe_r32(base + 0x38);
++ } else {
++ hwstats->tx_bytes += fe_r32(base);
++ hwstats->tx_packets += fe_r32(base + 0x04);
++ hwstats->tx_skip += fe_r32(base + 0x08);
++ hwstats->tx_collisions += fe_r32(base + 0x0c);
++ hwstats->rx_bytes += fe_r32(base + 0x20);
++ hwstats->rx_packets += fe_r32(base + 0x24);
++ hwstats->rx_overflow += fe_r32(base + 0x28);
++ hwstats->rx_fcs_errors += fe_r32(base + 0x2c);
++ hwstats->rx_short_errors += fe_r32(base + 0x30);
++ hwstats->rx_long_errors += fe_r32(base + 0x34);
++ hwstats->rx_checksum_errors += fe_r32(base + 0x38);
++ hwstats->rx_flow_control_packets += fe_r32(base + 0x3c);
++ }
++
++ u64_stats_update_end(&hwstats->syncp);
++}
++
++static struct rtnl_link_stats64 *fe_get_stats64(struct net_device *dev,
++ struct rtnl_link_stats64 *storage)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct fe_hw_stats *hwstats = priv->hw_stats;
++ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
++ unsigned int start;
++
++ if (!base) {
++ netdev_stats_to_stats64(storage, &dev->stats);
++ return storage;
++ }
++
++ if (netif_running(dev) && netif_device_present(dev)) {
++ if (spin_trylock(&hwstats->stats_lock)) {
++ fe_stats_update(priv);
++ spin_unlock(&hwstats->stats_lock);
++ }
++ }
++
++ do {
++ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
++ storage->rx_packets = hwstats->rx_packets;
++ storage->tx_packets = hwstats->tx_packets;
++ storage->rx_bytes = hwstats->rx_bytes;
++ storage->tx_bytes = hwstats->tx_bytes;
++ storage->collisions = hwstats->tx_collisions;
++ storage->rx_length_errors = hwstats->rx_short_errors +
++ hwstats->rx_long_errors;
++ storage->rx_over_errors = hwstats->rx_overflow;
++ storage->rx_crc_errors = hwstats->rx_fcs_errors;
++ storage->rx_errors = hwstats->rx_checksum_errors;
++ storage->tx_aborted_errors = hwstats->tx_skip;
++ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
++
++ storage->tx_errors = priv->netdev->stats.tx_errors;
++ storage->rx_dropped = priv->netdev->stats.rx_dropped;
++ storage->tx_dropped = priv->netdev->stats.tx_dropped;
++
++ return storage;
++}
++
++static int fe_vlan_rx_add_vid(struct net_device *dev,
++ __be16 proto, u16 vid)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ u32 idx = (vid & 0xf);
++ u32 vlan_cfg;
++
++ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
++ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
++ return 0;
++
++ if (test_bit(idx, &priv->vlan_map)) {
++ netdev_warn(dev, "disable tx vlan offload\n");
++ dev->wanted_features &= ~NETIF_F_HW_VLAN_CTAG_TX;
++ netdev_update_features(dev);
++ } else {
++ vlan_cfg = fe_r32(fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
++ ((idx >> 1) << 2));
++ if (idx & 0x1) {
++ vlan_cfg &= 0xffff;
++ vlan_cfg |= (vid << 16);
++ } else {
++ vlan_cfg &= 0xffff0000;
++ vlan_cfg |= vid;
++ }
++ fe_w32(vlan_cfg, fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
++ ((idx >> 1) << 2));
++ set_bit(idx, &priv->vlan_map);
++ }
++
++ return 0;
++}
++
++static int fe_vlan_rx_kill_vid(struct net_device *dev,
++ __be16 proto, u16 vid)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ u32 idx = (vid & 0xf);
++
++ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
++ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
++ return 0;
++
++ clear_bit(idx, &priv->vlan_map);
++
++ return 0;
++}
++
++static inline u32 fe_empty_txd(struct fe_tx_ring *ring)
++{
++ barrier();
++ return (u32)(ring->tx_ring_size -
++ ((ring->tx_next_idx - ring->tx_free_idx) &
++ (ring->tx_ring_size - 1)));
++}
++
++static int fe_tx_map_dma(struct sk_buff *skb, struct net_device *dev,
++ int tx_num, struct fe_tx_ring *ring)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct skb_frag_struct *frag;
++ struct fe_tx_dma txd, *ptxd;
++ struct fe_tx_buf *tx_buf;
++ dma_addr_t mapped_addr;
++ unsigned int nr_frags;
++ u32 def_txd4;
++ int i, j, k, frag_size, frag_map_size, offset;
++
++ tx_buf = &ring->tx_buf[ring->tx_next_idx];
++ memset(tx_buf, 0, sizeof(*tx_buf));
++ memset(&txd, 0, sizeof(txd));
++ nr_frags = skb_shinfo(skb)->nr_frags;
++
++ /* init tx descriptor */
++ if (priv->soc->tx_dma)
++ priv->soc->tx_dma(&txd);
++ else
++ txd.txd4 = TX_DMA_DESP4_DEF;
++ def_txd4 = txd.txd4;
++
++ /* TX Checksum offload */
++ if (skb->ip_summed == CHECKSUM_PARTIAL)
++ txd.txd4 |= TX_DMA_CHKSUM;
++
++ /* VLAN header offload */
++ if (skb_vlan_tag_present(skb)) {
++ u16 tag = skb_vlan_tag_get(skb);
++
++ if (IS_ENABLED(CONFIG_SOC_MT7621))
++ txd.txd4 |= TX_DMA_INS_VLAN_MT7621 | tag;
++ else
++ txd.txd4 |= TX_DMA_INS_VLAN |
++ ((tag >> VLAN_PRIO_SHIFT) << 4) |
++ (tag & 0xF);
++ }
++
++ /* TSO: fill MSS info in tcp checksum field */
++ if (skb_is_gso(skb)) {
++ if (skb_cow_head(skb, 0)) {
++ netif_warn(priv, tx_err, dev,
++ "GSO expand head fail.\n");
++ goto err_out;
++ }
++ if (skb_shinfo(skb)->gso_type &
++ (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
++ txd.txd4 |= TX_DMA_TSO;
++ tcp_hdr(skb)->check = htons(skb_shinfo(skb)->gso_size);
++ }
++ }
++
++ mapped_addr = dma_map_single(&dev->dev, skb->data,
++ skb_headlen(skb), DMA_TO_DEVICE);
++ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
++ goto err_out;
++ txd.txd1 = mapped_addr;
++ txd.txd2 = TX_DMA_PLEN0(skb_headlen(skb));
++
++ tx_buf->flags |= FE_TX_FLAGS_SINGLE0;
++ dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr);
++ dma_unmap_len_set(tx_buf, dma_len0, skb_headlen(skb));
++
++ /* TX SG offload */
++ j = ring->tx_next_idx;
++ k = 0;
++ for (i = 0; i < nr_frags; i++) {
++ offset = 0;
++ frag = &skb_shinfo(skb)->frags[i];
++ frag_size = skb_frag_size(frag);
++
++ while (frag_size > 0) {
++ frag_map_size = min(frag_size, TX_DMA_BUF_LEN);
++ mapped_addr = skb_frag_dma_map(&dev->dev, frag, offset,
++ frag_map_size,
++ DMA_TO_DEVICE);
++ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
++ goto err_dma;
++
++ if (k & 0x1) {
++ j = NEXT_TX_DESP_IDX(j);
++ txd.txd1 = mapped_addr;
++ txd.txd2 = TX_DMA_PLEN0(frag_map_size);
++ txd.txd4 = def_txd4;
++
++ tx_buf = &ring->tx_buf[j];
++ memset(tx_buf, 0, sizeof(*tx_buf));
++
++ tx_buf->flags |= FE_TX_FLAGS_PAGE0;
++ dma_unmap_addr_set(tx_buf, dma_addr0,
++ mapped_addr);
++ dma_unmap_len_set(tx_buf, dma_len0,
++ frag_map_size);
++ } else {
++ txd.txd3 = mapped_addr;
++ txd.txd2 |= TX_DMA_PLEN1(frag_map_size);
++
++ tx_buf->skb = (struct sk_buff *)DMA_DUMMY_DESC;
++ tx_buf->flags |= FE_TX_FLAGS_PAGE1;
++ dma_unmap_addr_set(tx_buf, dma_addr1,
++ mapped_addr);
++ dma_unmap_len_set(tx_buf, dma_len1,
++ frag_map_size);
++
++ if (!((i == (nr_frags - 1)) &&
++ (frag_map_size == frag_size))) {
++ fe_set_txd(&txd, &ring->tx_dma[j]);
++ memset(&txd, 0, sizeof(txd));
++ }
++ }
++ frag_size -= frag_map_size;
++ offset += frag_map_size;
++ k++;
++ }
++ }
++
++ /* set last segment */
++ if (k & 0x1)
++ txd.txd2 |= TX_DMA_LS1;
++ else
++ txd.txd2 |= TX_DMA_LS0;
++ fe_set_txd(&txd, &ring->tx_dma[j]);
++
++ /* store skb to cleanup */
++ tx_buf->skb = skb;
++
++ netdev_sent_queue(dev, skb->len);
++ skb_tx_timestamp(skb);
++
++ ring->tx_next_idx = NEXT_TX_DESP_IDX(j);
++ /* make sure that all changes to the dma ring are flushed before we
++ * continue
++ */
++ wmb();
++ if (unlikely(fe_empty_txd(ring) <= ring->tx_thresh)) {
++ netif_stop_queue(dev);
++ smp_mb();
++ if (unlikely(fe_empty_txd(ring) > ring->tx_thresh))
++ netif_wake_queue(dev);
++ }
++
++ if (netif_xmit_stopped(netdev_get_tx_queue(dev, 0)) || !skb->xmit_more)
++ fe_reg_w32(ring->tx_next_idx, FE_REG_TX_CTX_IDX0);
++
++ return 0;
++
++err_dma:
++ j = ring->tx_next_idx;
++ for (i = 0; i < tx_num; i++) {
++ ptxd = &ring->tx_dma[j];
++ tx_buf = &ring->tx_buf[j];
++
++ /* unmap dma */
++ fe_txd_unmap(&dev->dev, tx_buf);
++
++ ptxd->txd2 = TX_DMA_DESP2_DEF;
++ j = NEXT_TX_DESP_IDX(j);
++ }
++ /* make sure that all changes to the dma ring are flushed before we
++ * continue
++ */
++ wmb();
++
++err_out:
++ return -1;
++}
++
++static inline int fe_skb_padto(struct sk_buff *skb, struct fe_priv *priv)
++{
++ unsigned int len;
++ int ret;
++
++ ret = 0;
++ if (unlikely(skb->len < VLAN_ETH_ZLEN)) {
++ if ((priv->flags & FE_FLAG_PADDING_64B) &&
++ !(priv->flags & FE_FLAG_PADDING_BUG))
++ return ret;
++
++ if (skb_vlan_tag_present(skb))
++ len = ETH_ZLEN;
++ else if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
++ len = VLAN_ETH_ZLEN;
++ else if (!(priv->flags & FE_FLAG_PADDING_64B))
++ len = ETH_ZLEN;
++ else
++ return ret;
++
++ if (skb->len < len) {
++ ret = skb_pad(skb, len - skb->len);
++ if (ret < 0)
++ return ret;
++ skb->len = len;
++ skb_set_tail_pointer(skb, len);
++ }
++ }
++
++ return ret;
++}
++
++static inline int fe_cal_txd_req(struct sk_buff *skb)
++{
++ int i, nfrags;
++ struct skb_frag_struct *frag;
++
++ nfrags = 1;
++ if (skb_is_gso(skb)) {
++ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
++ frag = &skb_shinfo(skb)->frags[i];
++ nfrags += DIV_ROUND_UP(frag->size, TX_DMA_BUF_LEN);
++ }
++ } else {
++ nfrags += skb_shinfo(skb)->nr_frags;
++ }
++
++ return DIV_ROUND_UP(nfrags, 2);
++}
++
++static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct fe_tx_ring *ring = &priv->tx_ring;
++ struct net_device_stats *stats = &dev->stats;
++ int tx_num;
++ int len = skb->len;
++
++ if (fe_skb_padto(skb, priv)) {
++ netif_warn(priv, tx_err, dev, "tx padding failed!\n");
++ return NETDEV_TX_OK;
++ }
++
++ tx_num = fe_cal_txd_req(skb);
++ if (unlikely(fe_empty_txd(ring) <= tx_num)) {
++ netif_stop_queue(dev);
++ netif_err(priv, tx_queued, dev,
++ "Tx Ring full when queue awake!\n");
++ return NETDEV_TX_BUSY;
++ }
++
++ if (fe_tx_map_dma(skb, dev, tx_num, ring) < 0) {
++ stats->tx_dropped++;
++ } else {
++ stats->tx_packets++;
++ stats->tx_bytes += len;
++ }
++
++ return NETDEV_TX_OK;
++}
++
++static inline void fe_rx_vlan(struct sk_buff *skb)
++{
++ struct ethhdr *ehdr;
++ u16 vlanid;
++
++ if (!__vlan_get_tag(skb, &vlanid)) {
++ /* pop the vlan tag */
++ ehdr = (struct ethhdr *)skb->data;
++ memmove(skb->data + VLAN_HLEN, ehdr, ETH_ALEN * 2);
++ skb_pull(skb, VLAN_HLEN);
++ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlanid);
++ }
++}
++
++static int fe_poll_rx(struct napi_struct *napi, int budget,
++ struct fe_priv *priv, u32 rx_intr)
++{
++ struct net_device *netdev = priv->netdev;
++ struct net_device_stats *stats = &netdev->stats;
++ struct fe_soc_data *soc = priv->soc;
++ struct fe_rx_ring *ring = &priv->rx_ring;
++ int idx = ring->rx_calc_idx;
++ u32 checksum_bit;
++ struct sk_buff *skb;
++ u8 *data, *new_data;
++ struct fe_rx_dma *rxd, trxd;
++ int done = 0, pad;
++ bool rx_vlan = netdev->features & NETIF_F_HW_VLAN_CTAG_RX;
++
++ if (netdev->features & NETIF_F_RXCSUM)
++ checksum_bit = soc->checksum_bit;
++ else
++ checksum_bit = 0;
++
++ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
++ pad = 0;
++ else
++ pad = NET_IP_ALIGN;
++
++ while (done < budget) {
++ unsigned int pktlen;
++ dma_addr_t dma_addr;
++
++ idx = NEXT_RX_DESP_IDX(idx);
++ rxd = &ring->rx_dma[idx];
++ data = ring->rx_data[idx];
++
++ fe_get_rxd(&trxd, rxd);
++ if (!(trxd.rxd2 & RX_DMA_DONE))
++ break;
++
++ /* alloc new buffer */
++ new_data = netdev_alloc_frag(ring->frag_size);
++ if (unlikely(!new_data)) {
++ stats->rx_dropped++;
++ goto release_desc;
++ }
++ dma_addr = dma_map_single(&netdev->dev,
++ new_data + NET_SKB_PAD + pad,
++ ring->rx_buf_size,
++ DMA_FROM_DEVICE);
++ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) {
++ put_page(virt_to_head_page(new_data));
++ goto release_desc;
++ }
++
++ /* receive data */
++ skb = build_skb(data, ring->frag_size);
++ if (unlikely(!skb)) {
++ put_page(virt_to_head_page(new_data));
++ goto release_desc;
++ }
++ skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
++
++ dma_unmap_single(&netdev->dev, trxd.rxd1,
++ ring->rx_buf_size, DMA_FROM_DEVICE);
++ pktlen = RX_DMA_GET_PLEN0(trxd.rxd2);
++ skb->dev = netdev;
++ skb_put(skb, pktlen);
++ if (trxd.rxd4 & checksum_bit)
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ else
++ skb_checksum_none_assert(skb);
++ if (rx_vlan)
++ fe_rx_vlan(skb);
++ skb->protocol = eth_type_trans(skb, netdev);
++
++ stats->rx_packets++;
++ stats->rx_bytes += pktlen;
++
++ napi_gro_receive(napi, skb);
++
++ ring->rx_data[idx] = new_data;
++ rxd->rxd1 = (unsigned int)dma_addr;
++
++release_desc:
++ if (priv->flags & FE_FLAG_RX_SG_DMA)
++ rxd->rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
++ else
++ rxd->rxd2 = RX_DMA_LSO;
++
++ ring->rx_calc_idx = idx;
++ /* make sure that all changes to the dma ring are flushed before
++ * we continue
++ */
++ wmb();
++ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
++ done++;
++ }
++
++ if (done < budget)
++ fe_reg_w32(rx_intr, FE_REG_FE_INT_STATUS);
++
++ return done;
++}
++
++static int fe_poll_tx(struct fe_priv *priv, int budget, u32 tx_intr,
++ int *tx_again)
++{
++ struct net_device *netdev = priv->netdev;
++ struct device *dev = &netdev->dev;
++ unsigned int bytes_compl = 0;
++ struct sk_buff *skb;
++ struct fe_tx_buf *tx_buf;
++ int done = 0;
++ u32 idx, hwidx;
++ struct fe_tx_ring *ring = &priv->tx_ring;
++
++ idx = ring->tx_free_idx;
++ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
++
++ while ((idx != hwidx) && budget) {
++ tx_buf = &ring->tx_buf[idx];
++ skb = tx_buf->skb;
++
++ if (!skb)
++ break;
++
++ if (skb != (struct sk_buff *)DMA_DUMMY_DESC) {
++ bytes_compl += skb->len;
++ done++;
++ budget--;
++ }
++ fe_txd_unmap(dev, tx_buf);
++ idx = NEXT_TX_DESP_IDX(idx);
++ }
++ ring->tx_free_idx = idx;
++
++ if (idx == hwidx) {
++ /* read hw index again make sure no new tx packet */
++ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
++ if (idx == hwidx)
++ fe_reg_w32(tx_intr, FE_REG_FE_INT_STATUS);
++ else
++ *tx_again = 1;
++ } else {
++ *tx_again = 1;
++ }
++
++ if (done) {
++ netdev_completed_queue(netdev, done, bytes_compl);
++ smp_mb();
++ if (unlikely(netif_queue_stopped(netdev) &&
++ (fe_empty_txd(ring) > ring->tx_thresh)))
++ netif_wake_queue(netdev);
++ }
++
++ return done;
++}
++
++static int fe_poll(struct napi_struct *napi, int budget)
++{
++ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
++ struct fe_hw_stats *hwstat = priv->hw_stats;
++ int tx_done, rx_done, tx_again;
++ u32 status, fe_status, status_reg, mask;
++ u32 tx_intr, rx_intr, status_intr;
++
++ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++ fe_status = status;
++ tx_intr = priv->soc->tx_int;
++ rx_intr = priv->soc->rx_int;
++ status_intr = priv->soc->status_int;
++ tx_done = 0;
++ rx_done = 0;
++ tx_again = 0;
++
++ if (fe_reg_table[FE_REG_FE_INT_STATUS2]) {
++ fe_status = fe_reg_r32(FE_REG_FE_INT_STATUS2);
++ status_reg = FE_REG_FE_INT_STATUS2;
++ } else {
++ status_reg = FE_REG_FE_INT_STATUS;
++ }
++
++ if (status & tx_intr)
++ tx_done = fe_poll_tx(priv, budget, tx_intr, &tx_again);
++
++ if (status & rx_intr)
++ rx_done = fe_poll_rx(napi, budget, priv, rx_intr);
++
++ if (unlikely(fe_status & status_intr)) {
++ if (hwstat && spin_trylock(&hwstat->stats_lock)) {
++ fe_stats_update(priv);
++ spin_unlock(&hwstat->stats_lock);
++ }
++ fe_reg_w32(status_intr, status_reg);
++ }
++
++ if (unlikely(netif_msg_intr(priv))) {
++ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
++ netdev_info(priv->netdev,
++ "done tx %d, rx %d, intr 0x%08x/0x%x\n",
++ tx_done, rx_done, status, mask);
++ }
++
++ if (!tx_again && (rx_done < budget)) {
++ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++ if (status & (tx_intr | rx_intr)) {
++ /* let napi poll again */
++ rx_done = budget;
++ goto poll_again;
++ }
++
++ napi_complete(napi);
++ fe_int_enable(tx_intr | rx_intr);
++ } else {
++ rx_done = budget;
++ }
++
++poll_again:
++ return rx_done;
++}
++
++static void fe_tx_timeout(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct fe_tx_ring *ring = &priv->tx_ring;
++
++ priv->netdev->stats.tx_errors++;
++ netif_err(priv, tx_err, dev,
++ "transmit timed out\n");
++ netif_info(priv, drv, dev, "dma_cfg:%08x\n",
++ fe_reg_r32(FE_REG_PDMA_GLO_CFG));
++ netif_info(priv, drv, dev, "tx_ring=%d, "
++ "base=%08x, max=%u, ctx=%u, dtx=%u, fdx=%hu, next=%hu\n",
++ 0, fe_reg_r32(FE_REG_TX_BASE_PTR0),
++ fe_reg_r32(FE_REG_TX_MAX_CNT0),
++ fe_reg_r32(FE_REG_TX_CTX_IDX0),
++ fe_reg_r32(FE_REG_TX_DTX_IDX0),
++ ring->tx_free_idx,
++ ring->tx_next_idx);
++ netif_info(priv, drv, dev,
++ "rx_ring=%d, base=%08x, max=%u, calc=%u, drx=%u\n",
++ 0, fe_reg_r32(FE_REG_RX_BASE_PTR0),
++ fe_reg_r32(FE_REG_RX_MAX_CNT0),
++ fe_reg_r32(FE_REG_RX_CALC_IDX0),
++ fe_reg_r32(FE_REG_RX_DRX_IDX0));
++
++ if (!test_and_set_bit(FE_FLAG_RESET_PENDING, priv->pending_flags))
++ schedule_work(&priv->pending_work);
++}
++
++static irqreturn_t fe_handle_irq(int irq, void *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ u32 status, int_mask;
++
++ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ int_mask = (priv->soc->rx_int | priv->soc->tx_int);
++ if (likely(status & int_mask)) {
++ if (likely(napi_schedule_prep(&priv->rx_napi))) {
++ fe_int_disable(int_mask);
++ __napi_schedule(&priv->rx_napi);
++ }
++ } else {
++ fe_reg_w32(status, FE_REG_FE_INT_STATUS);
++ }
++
++ return IRQ_HANDLED;
++}
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void fe_poll_controller(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ u32 int_mask = priv->soc->tx_int | priv->soc->rx_int;
++
++ fe_int_disable(int_mask);
++ fe_handle_irq(dev->irq, dev);
++ fe_int_enable(int_mask);
++}
++#endif
++
++int fe_set_clock_cycle(struct fe_priv *priv)
++{
++ unsigned long sysclk = priv->sysclk;
++
++ sysclk /= FE_US_CYC_CNT_DIVISOR;
++ sysclk <<= FE_US_CYC_CNT_SHIFT;
++
++ fe_w32((fe_r32(FE_FE_GLO_CFG) &
++ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) |
++ sysclk,
++ FE_FE_GLO_CFG);
++ return 0;
++}
++
++void fe_fwd_config(struct fe_priv *priv)
++{
++ u32 fwd_cfg;
++
++ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
++
++ /* disable jumbo frame */
++ if (priv->flags & FE_FLAG_JUMBO_FRAME)
++ fwd_cfg &= ~FE_GDM1_JMB_EN;
++
++ /* set unicast/multicast/broadcast frame to cpu */
++ fwd_cfg &= ~0xffff;
++
++ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
++}
++
++static void fe_rxcsum_config(bool enable)
++{
++ if (enable)
++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN |
++ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
++ FE_GDMA1_FWD_CFG);
++ else
++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~(FE_GDM1_ICS_EN |
++ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
++ FE_GDMA1_FWD_CFG);
++}
++
++static void fe_txcsum_config(bool enable)
++{
++ if (enable)
++ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN |
++ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
++ FE_CDMA_CSG_CFG);
++ else
++ fe_w32(fe_r32(FE_CDMA_CSG_CFG) & ~(FE_ICS_GEN_EN |
++ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
++ FE_CDMA_CSG_CFG);
++}
++
++void fe_csum_config(struct fe_priv *priv)
++{
++ struct net_device *dev = priv_netdev(priv);
++
++ fe_txcsum_config((dev->features & NETIF_F_IP_CSUM));
++ fe_rxcsum_config((dev->features & NETIF_F_RXCSUM));
++}
++
++static int fe_hw_init(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ int i, err;
++
++ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
++ dev_name(priv->device), dev);
++ if (err)
++ return err;
++
++ if (priv->soc->set_mac)
++ priv->soc->set_mac(priv, dev->dev_addr);
++ else
++ fe_hw_set_macaddr(priv, dev->dev_addr);
++
++ /* disable delay interrupt */
++ fe_reg_w32(0, FE_REG_DLY_INT_CFG);
++
++ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
++
++ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc */
++ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++ for (i = 0; i < 16; i += 2)
++ fe_w32(((i + 1) << 16) + i,
++ fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
++ (i * 2));
++
++ if (priv->soc->fwd_config(priv))
++ netdev_err(dev, "unable to get clock\n");
++
++ if (fe_reg_table[FE_REG_FE_RST_GL]) {
++ fe_reg_w32(1, FE_REG_FE_RST_GL);
++ fe_reg_w32(0, FE_REG_FE_RST_GL);
++ }
++
++ return 0;
++}
++
++static int fe_open(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ u32 val;
++ int err;
++
++ err = fe_init_dma(priv);
++ if (err) {
++ fe_free_dma(priv);
++ return err;
++ }
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++
++ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
++ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
++ val |= FE_RX_2B_OFFSET;
++ val |= priv->soc->pdma_glo_cfg;
++ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
++
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++
++ if (priv->phy)
++ priv->phy->start(priv);
++
++ if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
++ netif_carrier_on(dev);
++
++ napi_enable(&priv->rx_napi);
++ fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
++ netif_start_queue(dev);
++
++ return 0;
++}
++
++static int fe_stop(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ netif_tx_disable(dev);
++ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
++ napi_disable(&priv->rx_napi);
++
++ if (priv->phy)
++ priv->phy->stop(priv);
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++
++ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
++ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
++ FE_REG_PDMA_GLO_CFG);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++
++ /* wait dma stop */
++ for (i = 0; i < 10; i++) {
++ if (fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
++ (FE_TX_DMA_BUSY | FE_RX_DMA_BUSY)) {
++ msleep(20);
++ continue;
++ }
++ break;
++ }
++
++ fe_free_dma(priv);
++
++ return 0;
++}
++
++static int __init fe_init(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct device_node *port;
++ const char *mac_addr;
++ int err;
++
++ priv->soc->reset_fe();
++
++ if (priv->soc->switch_init)
++ if (priv->soc->switch_init(priv)) {
++ netdev_err(dev, "failed to initialize switch core\n");
++ return -ENODEV;
++ }
++
++ mac_addr = of_get_mac_address(priv->device->of_node);
++ if (mac_addr)
++ ether_addr_copy(dev->dev_addr, mac_addr);
++
++ /* If the mac address is invalid, use random mac address */
++ if (!is_valid_ether_addr(dev->dev_addr)) {
++ random_ether_addr(dev->dev_addr);
++ dev_err(priv->device, "generated random MAC address %pM\n",
++ dev->dev_addr);
++ }
++
++ err = fe_mdio_init(priv);
++ if (err)
++ return err;
++
++ if (priv->soc->port_init)
++ for_each_child_of_node(priv->device->of_node, port)
++ if (of_device_is_compatible(port, "mediatek,eth-port") &&
++ of_device_is_available(port))
++ priv->soc->port_init(priv, port);
++
++ if (priv->phy) {
++ err = priv->phy->connect(priv);
++ if (err)
++ goto err_phy_disconnect;
++ }
++
++ err = fe_hw_init(dev);
++ if (!err)
++ return 0;
++
++err_phy_disconnect:
++ if (priv->phy)
++ priv->phy->disconnect(priv);
++ fe_mdio_cleanup(priv);
++
++ return err;
++}
++
++static void fe_uninit(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (priv->phy)
++ priv->phy->disconnect(priv);
++ fe_mdio_cleanup(priv);
++
++ fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
++ free_irq(dev->irq, dev);
++}
++
++static int fe_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (!priv->phy_dev)
++ return -ENODEV;
++
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return phy_mii_ioctl(priv->phy_dev, ifr, cmd);
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static int fe_change_mtu(struct net_device *dev, int new_mtu)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ int frag_size, old_mtu;
++ u32 fwd_cfg;
++
++ if (!(priv->flags & FE_FLAG_JUMBO_FRAME))
++ return eth_change_mtu(dev, new_mtu);
++
++ frag_size = fe_max_frag_size(new_mtu);
++ if (new_mtu < 68 || frag_size > PAGE_SIZE)
++ return -EINVAL;
++
++ old_mtu = dev->mtu;
++ dev->mtu = new_mtu;
++
++ /* return early if the buffer sizes will not change */
++ if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
++ return 0;
++ if (old_mtu > ETH_DATA_LEN && new_mtu > ETH_DATA_LEN)
++ return 0;
++
++ if (new_mtu <= ETH_DATA_LEN)
++ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
++ else
++ priv->rx_ring.frag_size = PAGE_SIZE;
++ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
++
++ if (!netif_running(dev))
++ return 0;
++
++ fe_stop(dev);
++ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
++ if (new_mtu <= ETH_DATA_LEN) {
++ fwd_cfg &= ~FE_GDM1_JMB_EN;
++ } else {
++ fwd_cfg &= ~(FE_GDM1_JMB_LEN_MASK << FE_GDM1_JMB_LEN_SHIFT);
++ fwd_cfg |= (DIV_ROUND_UP(frag_size, 1024) <<
++ FE_GDM1_JMB_LEN_SHIFT) | FE_GDM1_JMB_EN;
++ }
++ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
++
++ return fe_open(dev);
++}
++
++static const struct net_device_ops fe_netdev_ops = {
++ .ndo_init = fe_init,
++ .ndo_uninit = fe_uninit,
++ .ndo_open = fe_open,
++ .ndo_stop = fe_stop,
++ .ndo_start_xmit = fe_start_xmit,
++ .ndo_set_mac_address = fe_set_mac_address,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_do_ioctl = fe_do_ioctl,
++ .ndo_change_mtu = fe_change_mtu,
++ .ndo_tx_timeout = fe_tx_timeout,
++ .ndo_get_stats64 = fe_get_stats64,
++ .ndo_vlan_rx_add_vid = fe_vlan_rx_add_vid,
++ .ndo_vlan_rx_kill_vid = fe_vlan_rx_kill_vid,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = fe_poll_controller,
++#endif
++};
++
++static void fe_reset_pending(struct fe_priv *priv)
++{
++ struct net_device *dev = priv->netdev;
++ int err;
++
++ rtnl_lock();
++ fe_stop(dev);
++
++ err = fe_open(dev);
++ if (err) {
++ netif_alert(priv, ifup, dev,
++ "Driver up/down cycle failed, closing device.\n");
++ dev_close(dev);
++ }
++ rtnl_unlock();
++}
++
++static const struct fe_work_t fe_work[] = {
++ {FE_FLAG_RESET_PENDING, fe_reset_pending},
++};
++
++static void fe_pending_work(struct work_struct *work)
++{
++ struct fe_priv *priv = container_of(work, struct fe_priv, pending_work);
++ int i;
++ bool pending;
++
++ for (i = 0; i < ARRAY_SIZE(fe_work); i++) {
++ pending = test_and_clear_bit(fe_work[i].bitnr,
++ priv->pending_flags);
++ if (pending)
++ fe_work[i].action(priv);
++ }
++}
++
++static int fe_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const struct of_device_id *match;
++ struct fe_soc_data *soc;
++ struct net_device *netdev;
++ struct fe_priv *priv;
++ struct clk *sysclk;
++ int err, napi_weight;
++
++ device_reset(&pdev->dev);
++
++ match = of_match_device(of_fe_match, &pdev->dev);
++ soc = (struct fe_soc_data *)match->data;
++
++ if (soc->reg_table)
++ fe_reg_table = soc->reg_table;
++ else
++ soc->reg_table = fe_reg_table;
++
++ fe_base = devm_ioremap_resource(&pdev->dev, res);
++ if (!fe_base) {
++ err = -EADDRNOTAVAIL;
++ goto err_out;
++ }
++
++ netdev = alloc_etherdev(sizeof(*priv));
++ if (!netdev) {
++ dev_err(&pdev->dev, "alloc_etherdev failed\n");
++ err = -ENOMEM;
++ goto err_iounmap;
++ }
++
++ SET_NETDEV_DEV(netdev, &pdev->dev);
++ netdev->netdev_ops = &fe_netdev_ops;
++ netdev->base_addr = (unsigned long)fe_base;
++
++ netdev->irq = platform_get_irq(pdev, 0);
++ if (netdev->irq < 0) {
++ dev_err(&pdev->dev, "no IRQ resource found\n");
++ err = -ENXIO;
++ goto err_free_dev;
++ }
++
++ if (soc->init_data)
++ soc->init_data(soc, netdev);
++ /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
++ netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
++ netdev->vlan_features = netdev->hw_features &
++ ~(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
++ netdev->features |= netdev->hw_features;
++
++ /* fake rx vlan filter func. to support tx vlan offload func */
++ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
++
++ priv = netdev_priv(netdev);
++ spin_lock_init(&priv->page_lock);
++ if (fe_reg_table[FE_REG_FE_COUNTER_BASE]) {
++ priv->hw_stats = kzalloc(sizeof(*priv->hw_stats), GFP_KERNEL);
++ if (!priv->hw_stats) {
++ err = -ENOMEM;
++ goto err_free_dev;
++ }
++ spin_lock_init(&priv->hw_stats->stats_lock);
++ }
++
++ sysclk = devm_clk_get(&pdev->dev, NULL);
++ if (!IS_ERR(sysclk)) {
++ priv->sysclk = clk_get_rate(sysclk);
++ } else if ((priv->flags & FE_FLAG_CALIBRATE_CLK)) {
++ dev_err(&pdev->dev, "this soc needs a clk for calibration\n");
++ err = -ENXIO;
++ goto err_free_dev;
++ }
++
++ priv->switch_np = of_parse_phandle(pdev->dev.of_node, "mediatek,switch", 0);
++ if ((priv->flags & FE_FLAG_HAS_SWITCH) && !priv->switch_np) {
++ dev_err(&pdev->dev, "failed to read switch phandle\n");
++ err = -ENODEV;
++ goto err_free_dev;
++ }
++
++ priv->netdev = netdev;
++ priv->device = &pdev->dev;
++ priv->soc = soc;
++ priv->msg_enable = netif_msg_init(fe_msg_level, FE_DEFAULT_MSG_ENABLE);
++ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
++ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
++ priv->tx_ring.tx_ring_size = NUM_DMA_DESC;
++ priv->rx_ring.rx_ring_size = NUM_DMA_DESC;
++ INIT_WORK(&priv->pending_work, fe_pending_work);
++
++ napi_weight = 32;
++ if (priv->flags & FE_FLAG_NAPI_WEIGHT) {
++ napi_weight *= 4;
++ priv->tx_ring.tx_ring_size *= 4;
++ priv->rx_ring.rx_ring_size *= 4;
++ }
++ netif_napi_add(netdev, &priv->rx_napi, fe_poll, napi_weight);
++ fe_set_ethtool_ops(netdev);
++
++ err = register_netdev(netdev);
++ if (err) {
++ dev_err(&pdev->dev, "error bringing up device\n");
++ goto err_free_dev;
++ }
++
++ platform_set_drvdata(pdev, netdev);
++
++ netif_info(priv, probe, netdev, "mediatek frame engine at 0x%08lx, irq %d\n",
++ netdev->base_addr, netdev->irq);
++
++ return 0;
++
++err_free_dev:
++ free_netdev(netdev);
++err_iounmap:
++ devm_iounmap(&pdev->dev, fe_base);
++err_out:
++ return err;
++}
++
++static int fe_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct fe_priv *priv = netdev_priv(dev);
++
++ netif_napi_del(&priv->rx_napi);
++ kfree(priv->hw_stats);
++
++ cancel_work_sync(&priv->pending_work);
++
++ unregister_netdev(dev);
++ free_netdev(dev);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver fe_driver = {
++ .probe = fe_probe,
++ .remove = fe_remove,
++ .driver = {
++ .name = "mtk_soc_eth",
++ .owner = THIS_MODULE,
++ .of_match_table = of_fe_match,
++ },
++};
++
++module_platform_driver(fe_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
++MODULE_VERSION(MTK_FE_DRV_VERSION);
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+new file mode 100644
+index 0000000..ba5ba07
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+@@ -0,0 +1,522 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef FE_ETH_H
++#define FE_ETH_H
++
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <linux/dma-mapping.h>
++#include <linux/phy.h>
++#include <linux/ethtool.h>
++#include <linux/version.h>
++
++enum fe_reg {
++ FE_REG_PDMA_GLO_CFG = 0,
++ FE_REG_PDMA_RST_CFG,
++ FE_REG_DLY_INT_CFG,
++ FE_REG_TX_BASE_PTR0,
++ FE_REG_TX_MAX_CNT0,
++ FE_REG_TX_CTX_IDX0,
++ FE_REG_TX_DTX_IDX0,
++ FE_REG_RX_BASE_PTR0,
++ FE_REG_RX_MAX_CNT0,
++ FE_REG_RX_CALC_IDX0,
++ FE_REG_RX_DRX_IDX0,
++ FE_REG_FE_INT_ENABLE,
++ FE_REG_FE_INT_STATUS,
++ FE_REG_FE_DMA_VID_BASE,
++ FE_REG_FE_COUNTER_BASE,
++ FE_REG_FE_RST_GL,
++ FE_REG_FE_INT_STATUS2,
++ FE_REG_COUNT
++};
++
++enum fe_work_flag {
++ FE_FLAG_RESET_PENDING,
++ FE_FLAG_MAX
++};
++
++#define MTK_FE_DRV_VERSION "0.1.2"
++
++/* power of 2 to let NEXT_TX_DESP_IDX work */
++#define NUM_DMA_DESC BIT(7)
++#define MAX_DMA_DESC 0xfff
++
++#define FE_DELAY_EN_INT 0x80
++#define FE_DELAY_MAX_INT 0x04
++#define FE_DELAY_MAX_TOUT 0x04
++#define FE_DELAY_TIME 20
++#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | \
++ FE_DELAY_MAX_TOUT)
++#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
++#define FE_PSE_FQFC_CFG_INIT 0x80504000
++#define FE_PSE_FQFC_CFG_256Q 0xff908000
++
++/* interrupt bits */
++#define FE_CNT_PPE_AF BIT(31)
++#define FE_CNT_GDM_AF BIT(29)
++#define FE_PSE_P2_FC BIT(26)
++#define FE_PSE_BUF_DROP BIT(24)
++#define FE_GDM_OTHER_DROP BIT(23)
++#define FE_PSE_P1_FC BIT(22)
++#define FE_PSE_P0_FC BIT(21)
++#define FE_PSE_FQ_EMPTY BIT(20)
++#define FE_GE1_STA_CHG BIT(18)
++#define FE_TX_COHERENT BIT(17)
++#define FE_RX_COHERENT BIT(16)
++#define FE_TX_DONE_INT3 BIT(11)
++#define FE_TX_DONE_INT2 BIT(10)
++#define FE_TX_DONE_INT1 BIT(9)
++#define FE_TX_DONE_INT0 BIT(8)
++#define FE_RX_DONE_INT0 BIT(2)
++#define FE_TX_DLY_INT BIT(1)
++#define FE_RX_DLY_INT BIT(0)
++
++#define FE_RX_DONE_INT FE_RX_DONE_INT0
++#define FE_TX_DONE_INT (FE_TX_DONE_INT0 | FE_TX_DONE_INT1 | \
++ FE_TX_DONE_INT2 | FE_TX_DONE_INT3)
++
++#define RT5350_RX_DLY_INT BIT(30)
++#define RT5350_TX_DLY_INT BIT(28)
++#define RT5350_RX_DONE_INT1 BIT(17)
++#define RT5350_RX_DONE_INT0 BIT(16)
++#define RT5350_TX_DONE_INT3 BIT(3)
++#define RT5350_TX_DONE_INT2 BIT(2)
++#define RT5350_TX_DONE_INT1 BIT(1)
++#define RT5350_TX_DONE_INT0 BIT(0)
++
++#define RT5350_RX_DONE_INT (RT5350_RX_DONE_INT0 | RT5350_RX_DONE_INT1)
++#define RT5350_TX_DONE_INT (RT5350_TX_DONE_INT0 | RT5350_TX_DONE_INT1 | \
++ RT5350_TX_DONE_INT2 | RT5350_TX_DONE_INT3)
++
++/* registers */
++#define FE_FE_OFFSET 0x0000
++#define FE_GDMA_OFFSET 0x0020
++#define FE_PSE_OFFSET 0x0040
++#define FE_GDMA2_OFFSET 0x0060
++#define FE_CDMA_OFFSET 0x0080
++#define FE_DMA_VID0 0x00a8
++#define FE_PDMA_OFFSET 0x0100
++#define FE_PPE_OFFSET 0x0200
++#define FE_CMTABLE_OFFSET 0x0400
++#define FE_POLICYTABLE_OFFSET 0x1000
++
++#define RT5350_PDMA_OFFSET 0x0800
++#define RT5350_SDM_OFFSET 0x0c00
++
++#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00)
++#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04)
++#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08)
++#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C)
++#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10)
++#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14)
++#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18)
++#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C)
++
++#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00)
++#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04)
++#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08)
++#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C)
++#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10)
++
++#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00)
++#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04)
++#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08)
++#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C)
++#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10)
++
++#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00)
++#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04)
++#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08)
++#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C)
++
++#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00)
++#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04)
++
++#ifdef CONFIG_SOC_MT7621
++#define MT7620A_GDMA_OFFSET 0x0500
++#else
++#define MT7620A_GDMA_OFFSET 0x0600
++#endif
++#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00)
++#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04)
++#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08)
++#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C)
++#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10)
++
++#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
++#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
++#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
++#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
++#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
++#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
++#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
++#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
++#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
++#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
++#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
++#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
++#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
++#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
++#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
++#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
++#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
++#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
++#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
++#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
++#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
++#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
++#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
++#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
++#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
++#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
++#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
++#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
++#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
++#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
++
++#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00)
++#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04)
++#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08)
++#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C)
++#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10)
++#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14)
++#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18)
++#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C)
++#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20)
++#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24)
++#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28)
++#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C)
++#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30)
++#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34)
++#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38)
++#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C)
++#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40)
++#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44)
++#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48)
++#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C)
++#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50)
++#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54)
++#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58)
++#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C)
++#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60)
++#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64)
++#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68)
++#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C)
++
++/* Switch DMA configuration */
++#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00)
++#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04)
++#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08)
++#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C)
++#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10)
++#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100)
++#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104)
++#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108)
++#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C)
++#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110)
++
++#define RT5350_SDM_ICS_EN BIT(16)
++#define RT5350_SDM_TCS_EN BIT(17)
++#define RT5350_SDM_UCS_EN BIT(18)
++
++/* MDIO_CFG register bits */
++#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29)
++#define FE_MDIO_CFG_GP1_BP_EN BIT(16)
++#define FE_MDIO_CFG_GP1_FRC_EN BIT(15)
++#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
++#define FE_MDIO_CFG_GP1_DUPLEX BIT(12)
++#define FE_MDIO_CFG_GP1_FC_TX BIT(11)
++#define FE_MDIO_CFG_GP1_FC_RX BIT(10)
++#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9)
++#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8)
++#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
++#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5)
++#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4)
++#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
++#define FE_MDIO_CFG_TX_CLK_SKEW_0 0
++#define FE_MDIO_CFG_TX_CLK_SKEW_200 1
++#define FE_MDIO_CFG_TX_CLK_SKEW_400 2
++#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3
++
++/* uni-cast port */
++#define FE_GDM1_JMB_LEN_MASK 0xf
++#define FE_GDM1_JMB_LEN_SHIFT 28
++#define FE_GDM1_ICS_EN BIT(22)
++#define FE_GDM1_TCS_EN BIT(21)
++#define FE_GDM1_UCS_EN BIT(20)
++#define FE_GDM1_JMB_EN BIT(19)
++#define FE_GDM1_STRPCRC BIT(16)
++#define FE_GDM1_UFRC_P_CPU (0 << 12)
++#define FE_GDM1_UFRC_P_GDMA1 (1 << 12)
++#define FE_GDM1_UFRC_P_PPE (6 << 12)
++
++/* checksums */
++#define FE_ICS_GEN_EN BIT(2)
++#define FE_UCS_GEN_EN BIT(1)
++#define FE_TCS_GEN_EN BIT(0)
++
++/* dma ring */
++#define FE_PST_DRX_IDX0 BIT(16)
++#define FE_PST_DTX_IDX3 BIT(3)
++#define FE_PST_DTX_IDX2 BIT(2)
++#define FE_PST_DTX_IDX1 BIT(1)
++#define FE_PST_DTX_IDX0 BIT(0)
++
++#define FE_RX_2B_OFFSET BIT(31)
++#define FE_TX_WB_DDONE BIT(6)
++#define FE_RX_DMA_BUSY BIT(3)
++#define FE_TX_DMA_BUSY BIT(1)
++#define FE_RX_DMA_EN BIT(2)
++#define FE_TX_DMA_EN BIT(0)
++
++#define FE_PDMA_SIZE_4DWORDS (0 << 4)
++#define FE_PDMA_SIZE_8DWORDS (1 << 4)
++#define FE_PDMA_SIZE_16DWORDS (2 << 4)
++
++#define FE_US_CYC_CNT_MASK 0xff
++#define FE_US_CYC_CNT_SHIFT 0x8
++#define FE_US_CYC_CNT_DIVISOR 1000000
++
++/* rxd2 */
++#define RX_DMA_DONE BIT(31)
++#define RX_DMA_LSO BIT(30)
++#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
++#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
++#define RX_DMA_TAG BIT(15)
++/* rxd3 */
++#define RX_DMA_TPID(_x) (((_x) >> 16) & 0xffff)
++#define RX_DMA_VID(_x) ((_x) & 0xffff)
++/* rxd4 */
++#define RX_DMA_L4VALID BIT(30)
++
++struct fe_rx_dma {
++ unsigned int rxd1;
++ unsigned int rxd2;
++ unsigned int rxd3;
++ unsigned int rxd4;
++} __packed __aligned(4);
++
++#define TX_DMA_BUF_LEN 0x3fff
++#define TX_DMA_PLEN0_MASK (TX_DMA_BUF_LEN << 16)
++#define TX_DMA_PLEN0(_x) (((_x) & TX_DMA_BUF_LEN) << 16)
++#define TX_DMA_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
++#define TX_DMA_GET_PLEN0(_x) (((_x) >> 16) & TX_DMA_BUF_LEN)
++#define TX_DMA_GET_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
++#define TX_DMA_LS1 BIT(14)
++#define TX_DMA_LS0 BIT(30)
++#define TX_DMA_DONE BIT(31)
++
++#define TX_DMA_INS_VLAN_MT7621 BIT(16)
++#define TX_DMA_INS_VLAN BIT(7)
++#define TX_DMA_INS_PPPOE BIT(12)
++#define TX_DMA_QN(_x) ((_x) << 16)
++#define TX_DMA_PN(_x) ((_x) << 24)
++#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
++#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
++#define TX_DMA_UDF BIT(20)
++#define TX_DMA_CHKSUM (0x7 << 29)
++#define TX_DMA_TSO BIT(28)
++
++/* frame engine counters */
++#define FE_PPE_AC_BCNT0 (FE_CMTABLE_OFFSET + 0x00)
++#define FE_GDMA1_TX_GBCNT (FE_CMTABLE_OFFSET + 0x300)
++#define FE_GDMA2_TX_GBCNT (FE_GDMA1_TX_GBCNT + 0x40)
++
++/* phy device flags */
++#define FE_PHY_FLAG_PORT BIT(0)
++#define FE_PHY_FLAG_ATTACH BIT(1)
++
++struct fe_tx_dma {
++ unsigned int txd1;
++ unsigned int txd2;
++ unsigned int txd3;
++ unsigned int txd4;
++} __packed __aligned(4);
++
++struct fe_priv;
++
++struct fe_phy {
++ /* make sure that phy operations are atomic */
++ spinlock_t lock;
++
++ struct phy_device *phy[8];
++ struct device_node *phy_node[8];
++ const __be32 *phy_fixed[8];
++ int duplex[8];
++ int speed[8];
++ int tx_fc[8];
++ int rx_fc[8];
++ int (*connect)(struct fe_priv *priv);
++ void (*disconnect)(struct fe_priv *priv);
++ void (*start)(struct fe_priv *priv);
++ void (*stop)(struct fe_priv *priv);
++};
++
++struct fe_soc_data {
++ const u16 *reg_table;
++
++ void (*init_data)(struct fe_soc_data *data, struct net_device *netdev);
++ void (*reset_fe)(void);
++ void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
++ int (*fwd_config)(struct fe_priv *priv);
++ void (*tx_dma)(struct fe_tx_dma *txd);
++ int (*switch_init)(struct fe_priv *priv);
++ void (*port_init)(struct fe_priv *priv, struct device_node *port);
++ int (*has_carrier)(struct fe_priv *priv);
++ int (*mdio_init)(struct fe_priv *priv);
++ void (*mdio_cleanup)(struct fe_priv *priv);
++ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg,
++ u16 val);
++ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
++ void (*mdio_adjust_link)(struct fe_priv *priv, int port);
++
++ void *swpriv;
++ u32 pdma_glo_cfg;
++ u32 rx_int;
++ u32 tx_int;
++ u32 status_int;
++ u32 checksum_bit;
++};
++
++#define FE_FLAG_PADDING_64B BIT(0)
++#define FE_FLAG_PADDING_BUG BIT(1)
++#define FE_FLAG_JUMBO_FRAME BIT(2)
++#define FE_FLAG_RX_2B_OFFSET BIT(3)
++#define FE_FLAG_RX_SG_DMA BIT(4)
++#define FE_FLAG_RX_VLAN_CTAG BIT(5)
++#define FE_FLAG_NAPI_WEIGHT BIT(6)
++#define FE_FLAG_CALIBRATE_CLK BIT(7)
++#define FE_FLAG_HAS_SWITCH BIT(8)
++
++#define FE_STAT_REG_DECLARE \
++ _FE(tx_bytes) \
++ _FE(tx_packets) \
++ _FE(tx_skip) \
++ _FE(tx_collisions) \
++ _FE(rx_bytes) \
++ _FE(rx_packets) \
++ _FE(rx_overflow) \
++ _FE(rx_fcs_errors) \
++ _FE(rx_short_errors) \
++ _FE(rx_long_errors) \
++ _FE(rx_checksum_errors) \
++ _FE(rx_flow_control_packets)
++
++struct fe_hw_stats {
++ /* make sure that stats operations are atomic */
++ spinlock_t stats_lock;
++
++ struct u64_stats_sync syncp;
++#define _FE(x) u64 x;
++ FE_STAT_REG_DECLARE
++#undef _FE
++};
++
++enum fe_tx_flags {
++ FE_TX_FLAGS_SINGLE0 = 0x01,
++ FE_TX_FLAGS_PAGE0 = 0x02,
++ FE_TX_FLAGS_PAGE1 = 0x04,
++};
++
++struct fe_tx_buf {
++ struct sk_buff *skb;
++ u32 flags;
++ DEFINE_DMA_UNMAP_ADDR(dma_addr0);
++ DEFINE_DMA_UNMAP_LEN(dma_len0);
++ DEFINE_DMA_UNMAP_ADDR(dma_addr1);
++ DEFINE_DMA_UNMAP_LEN(dma_len1);
++};
++
++struct fe_tx_ring {
++ struct fe_tx_dma *tx_dma;
++ struct fe_tx_buf *tx_buf;
++ dma_addr_t tx_phys;
++ u16 tx_ring_size;
++ u16 tx_free_idx;
++ u16 tx_next_idx;
++ u16 tx_thresh;
++};
++
++struct fe_rx_ring {
++ struct fe_rx_dma *rx_dma;
++ u8 **rx_data;
++ dma_addr_t rx_phys;
++ u16 rx_ring_size;
++ u16 frag_size;
++ u16 rx_buf_size;
++ u16 rx_calc_idx;
++};
++
++struct fe_priv {
++ /* make sure that register operations are atomic */
++ spinlock_t page_lock;
++
++ struct fe_soc_data *soc;
++ struct net_device *netdev;
++ struct device_node *switch_np;
++ u32 msg_enable;
++ u32 flags;
++
++ struct device *device;
++ unsigned long sysclk;
++
++ struct fe_rx_ring rx_ring;
++ struct napi_struct rx_napi;
++
++ struct fe_tx_ring tx_ring;
++
++ struct fe_phy *phy;
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++ u32 phy_flags;
++
++ int link[8];
++
++ struct fe_hw_stats *hw_stats;
++ unsigned long vlan_map;
++ struct work_struct pending_work;
++ DECLARE_BITMAP(pending_flags, FE_FLAG_MAX);
++};
++
++extern const struct of_device_id of_fe_match[];
++
++void fe_w32(u32 val, unsigned reg);
++u32 fe_r32(unsigned reg);
++
++int fe_set_clock_cycle(struct fe_priv *priv);
++void fe_csum_config(struct fe_priv *priv);
++void fe_stats_update(struct fe_priv *priv);
++void fe_fwd_config(struct fe_priv *priv);
++void fe_reg_w32(u32 val, enum fe_reg reg);
++u32 fe_reg_r32(enum fe_reg reg);
++
++void fe_reset(u32 reset_bits);
++
++static inline void *priv_netdev(struct fe_priv *priv)
++{
++ return (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
++}
++
++#endif /* FE_ETH_H */
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch b/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch
new file mode 100644
index 0000000..064298a
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch
@@ -0,0 +1,700 @@
+From 2c39ddc83452c34fedc86261ed1f96d7537adfd1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:28:10 +0100
+Subject: [PATCH 502/513] net-next: mediatek: add switch driver for rt3050
+
+This driver is very basic and only provides basic init and irq support.
+Switchdev support for this device will follow.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/esw_rt3050.c | 640 ++++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/esw_rt3050.h | 29 ++
+ 2 files changed, 669 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c
+ create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h
+
+diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c
+new file mode 100644
+index 0000000..f07f4a5
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
+@@ -0,0 +1,640 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++
++#include <linux/ioport.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++
++/* HW limitations for this switch:
++ * - No large frame support (PKT_MAX_LEN at most 1536)
++ * - Can't have untagged vlan and tagged vlan on one port at the same time,
++ * though this might be possible using the undocumented PPE.
++ */
++
++#define RT305X_ESW_REG_ISR 0x00
++#define RT305X_ESW_REG_IMR 0x04
++#define RT305X_ESW_REG_FCT0 0x08
++#define RT305X_ESW_REG_PFC1 0x14
++#define RT305X_ESW_REG_ATS 0x24
++#define RT305X_ESW_REG_ATS0 0x28
++#define RT305X_ESW_REG_ATS1 0x2c
++#define RT305X_ESW_REG_ATS2 0x30
++#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
++#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
++#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
++#define RT305X_ESW_REG_POA 0x80
++#define RT305X_ESW_REG_FPA 0x84
++#define RT305X_ESW_REG_SOCPC 0x8c
++#define RT305X_ESW_REG_POC0 0x90
++#define RT305X_ESW_REG_POC1 0x94
++#define RT305X_ESW_REG_POC2 0x98
++#define RT305X_ESW_REG_SGC 0x9c
++#define RT305X_ESW_REG_STRT 0xa0
++#define RT305X_ESW_REG_PCR0 0xc0
++#define RT305X_ESW_REG_PCR1 0xc4
++#define RT305X_ESW_REG_FPA2 0xc8
++#define RT305X_ESW_REG_FCT2 0xcc
++#define RT305X_ESW_REG_SGC2 0xe4
++#define RT305X_ESW_REG_P0LED 0xa4
++#define RT305X_ESW_REG_P1LED 0xa8
++#define RT305X_ESW_REG_P2LED 0xac
++#define RT305X_ESW_REG_P3LED 0xb0
++#define RT305X_ESW_REG_P4LED 0xb4
++#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
++#define RT305X_ESW_REG_P1PC 0xec
++#define RT305X_ESW_REG_P2PC 0xf0
++#define RT305X_ESW_REG_P3PC 0xf4
++#define RT305X_ESW_REG_P4PC 0xf8
++#define RT305X_ESW_REG_P5PC 0xfc
++
++#define RT305X_ESW_LED_LINK 0
++#define RT305X_ESW_LED_100M 1
++#define RT305X_ESW_LED_DUPLEX 2
++#define RT305X_ESW_LED_ACTIVITY 3
++#define RT305X_ESW_LED_COLLISION 4
++#define RT305X_ESW_LED_LINKACT 5
++#define RT305X_ESW_LED_DUPLCOLL 6
++#define RT305X_ESW_LED_10MACT 7
++#define RT305X_ESW_LED_100MACT 8
++/* Additional led states not in datasheet: */
++#define RT305X_ESW_LED_BLINK 10
++#define RT305X_ESW_LED_ON 12
++
++#define RT305X_ESW_LINK_S 25
++#define RT305X_ESW_DUPLEX_S 9
++#define RT305X_ESW_SPD_S 0
++
++#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
++#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
++#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
++
++#define RT305X_ESW_PCR1_WT_DONE BIT(0)
++
++#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
++#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
++
++#define RT305X_ESW_PVIDC_PVID_M 0xfff
++#define RT305X_ESW_PVIDC_PVID_S 12
++
++#define RT305X_ESW_VLANI_VID_M 0xfff
++#define RT305X_ESW_VLANI_VID_S 12
++
++#define RT305X_ESW_VMSC_MSC_M 0xff
++#define RT305X_ESW_VMSC_MSC_S 8
++
++#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
++#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
++#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
++#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
++
++#define RT305X_ESW_POC0_EN_BP_S 0
++#define RT305X_ESW_POC0_EN_FC_S 8
++#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
++#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
++#define RT305X_ESW_POC0_DIS_PORT_S 23
++
++#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
++#define RT305X_ESW_POC2_UNTAG_EN_S 0
++#define RT305X_ESW_POC2_ENAGING_S 8
++#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
++
++#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
++#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
++#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
++#define RT305X_ESW_SGC2_LAN_PMAP_S 24
++
++#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
++#define RT305X_ESW_PFC1_EN_VLAN_S 16
++#define RT305X_ESW_PFC1_EN_TOS_S 24
++
++#define RT305X_ESW_VLAN_NONE 0xfff
++
++#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
++#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
++
++#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
++#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
++
++#define RT305X_ESW_POA_LINK_MASK 0x1f
++#define RT305X_ESW_POA_LINK_SHIFT 25
++
++#define RT305X_ESW_PORT_ST_CHG BIT(26)
++#define RT305X_ESW_PORT0 0
++#define RT305X_ESW_PORT1 1
++#define RT305X_ESW_PORT2 2
++#define RT305X_ESW_PORT3 3
++#define RT305X_ESW_PORT4 4
++#define RT305X_ESW_PORT5 5
++#define RT305X_ESW_PORT6 6
++
++#define RT305X_ESW_PMAP_LLLLLL 0x3f
++#define RT305X_ESW_PMAP_LLLLWL 0x2f
++#define RT305X_ESW_PMAP_WLLLLL 0x3e
++
++#define RT305X_ESW_PORTS_INTERNAL \
++ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
++ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
++ BIT(RT305X_ESW_PORT4))
++
++#define RT305X_ESW_PORTS_NOCPU \
++ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
++
++#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
++
++#define RT305X_ESW_PORTS_ALL \
++ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
++
++#define RT305X_ESW_NUM_PORTS 7
++#define RT305X_ESW_NUM_LEDS 5
++
++#define RT5350_EWS_REG_LED_POLARITY 0x168
++#define RT5350_RESET_EPHY BIT(24)
++
++struct esw_port {
++ bool disable;
++ u8 led;
++};
++
++struct rt305x_esw {
++ struct device *dev;
++ void __iomem *base;
++ int irq;
++
++ /* Protects against concurrent register r/w operations. */
++ spinlock_t reg_rw_lock;
++
++ unsigned char port_map;
++ unsigned int reg_led_polarity;
++
++ struct esw_port ports[RT305X_ESW_NUM_PORTS];
++
++};
++
++static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
++{
++ __raw_writel(val, esw->base + reg);
++}
++
++static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
++{
++ return __raw_readl(esw->base + reg);
++}
++
++static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
++ unsigned long mask, unsigned long val)
++{
++ unsigned long t;
++
++ t = __raw_readl(esw->base + reg) & ~mask;
++ __raw_writel(t | val, esw->base + reg);
++}
++
++static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
++ unsigned long mask, unsigned long val)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&esw->reg_rw_lock, flags);
++ esw_rmw_raw(esw, reg, mask, val);
++ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
++}
++
++static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
++ u32 phy_register, u32 write_data)
++{
++ unsigned long t_start = jiffies;
++ int ret = 0;
++
++ while (1) {
++ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
++ RT305X_ESW_PCR1_WT_DONE))
++ break;
++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++ ret = 1;
++ goto out;
++ }
++ }
++
++ write_data &= 0xffff;
++ esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
++ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
++ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
++ RT305X_ESW_REG_PCR0);
++
++ t_start = jiffies;
++ while (1) {
++ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
++ RT305X_ESW_PCR1_WT_DONE)
++ break;
++
++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++ ret = 1;
++ break;
++ }
++ }
++out:
++ if (ret)
++ dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
++ return ret;
++}
++
++static unsigned esw_get_port_disable(struct rt305x_esw *esw)
++{
++ unsigned reg;
++
++ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
++ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
++ RT305X_ESW_POC0_DIS_PORT_M;
++}
++
++static void esw_hw_init(struct rt305x_esw *esw)
++{
++ int i;
++ u8 port_disable = 0;
++ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
++
++ /* vodoo from original driver */
++ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
++ /* Port priority 1 for all ports, vlan enabled. */
++ esw_w32(esw, 0x00005555 |
++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
++ RT305X_ESW_REG_PFC1);
++
++ /* Enable Back Pressure, and Flow Control */
++ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
++ RT305X_ESW_REG_POC0);
++
++ /* Enable Aging, and VLAN TAG removal */
++ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
++ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
++ RT305X_ESW_REG_POC2);
++
++ esw_w32(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
++
++ /* 300s aging timer, max packet len 1536, broadcast storm prevention
++ * disabled, disable collision abort, mac xor48 hash, 10 packet back
++ * pressure jam, GMII disable was_transmit, back pressure disabled,
++ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
++ * ports.
++ */
++ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
++
++ /* Setup SoC Port control register */
++ esw_w32(esw,
++ (RT305X_ESW_SOCPC_CRC_PADDING |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
++ RT305X_ESW_REG_SOCPC);
++
++ /* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
++ * turbo mii off, rgmi 3.3v off
++ * port5: disabled
++ * port6: enabled, gige, full-duplex, rx/tx-flow-control
++ */
++ esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
++
++ /* Force Link/Activity on ports */
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
++
++ /* Copy disabled port configuration from bootloader setup */
++ port_disable = esw_get_port_disable(esw);
++ for (i = 0; i < 6; i++)
++ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
++
++ if (ralink_soc == RT305X_SOC_RT3352) {
++ /* reset EPHY */
++ fe_reset(RT5350_RESET_EPHY);
++
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient LSB=0 disable PHY */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7016);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0038);
++ }
++
++ /* select global register */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* enlarge agcsel threshold 3 and threshold 2 */
++ rt305x_mii_write(esw, 0, 1, 0x4a40);
++ /* enlarge agcsel threshold 5 and threshold 4 */
++ rt305x_mii_write(esw, 0, 2, 0x6254);
++ /* enlarge agcsel threshold */
++ rt305x_mii_write(esw, 0, 3, 0xa17f);
++ rt305x_mii_write(esw, 0, 12, 0x7eaa);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* increased squelch pulse count threshold. */
++ rt305x_mii_write(esw, 0, 16, 0x0684);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* tune TP_IDL tail and head waveform, enable power
++ * down slew rate control
++ */
++ rt305x_mii_write(esw, 0, 22, 0x253f);
++ /* set PLL/Receive bias current are calibrated */
++ rt305x_mii_write(esw, 0, 27, 0x2fda);
++ /* change PLL/Receive bias current to internal(RT3350) */
++ rt305x_mii_write(esw, 0, 28, 0xc410);
++ /* change PLL bias current to internal(RT3052_MP3) */
++ rt305x_mii_write(esw, 0, 29, 0x598b);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ } else if (ralink_soc == RT305X_SOC_RT5350) {
++ /* reset EPHY */
++ fe_reset(RT5350_RESET_EPHY);
++
++ /* set the led polarity */
++ esw_w32(esw, esw->reg_led_polarity & 0x1F,
++ RT5350_EWS_REG_LED_POLARITY);
++
++ /* local registers */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient LSB=0 disable PHY */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7015);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0038);
++ }
++
++ /* global registers */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* enlarge agcsel threshold 3 and threshold 2 */
++ rt305x_mii_write(esw, 0, 1, 0x4a40);
++ /* enlarge agcsel threshold 5 and threshold 4 */
++ rt305x_mii_write(esw, 0, 2, 0x6254);
++ /* enlarge agcsel threshold 6 */
++ rt305x_mii_write(esw, 0, 3, 0xa17f);
++ rt305x_mii_write(esw, 0, 12, 0x7eaa);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* increased squelch pulse count threshold. */
++ rt305x_mii_write(esw, 0, 16, 0x0684);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* tune TP_IDL tail and head waveform, enable power
++ * down slew rate control
++ */
++ rt305x_mii_write(esw, 0, 22, 0x253f);
++ /* set PLL/Receive bias current are calibrated */
++ rt305x_mii_write(esw, 0, 27, 0x2fda);
++ /* change PLL/Receive bias current to internal(RT3350) */
++ rt305x_mii_write(esw, 0, 28, 0xc410);
++ /* change PLL bias current to internal(RT3052_MP3) */
++ rt305x_mii_write(esw, 0, 29, 0x598b);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ } else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
++ int i;
++
++ /* reset EPHY */
++ fe_reset(RT5350_RESET_EPHY);
++
++ rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
++ rt305x_mii_write(esw, 0, 26, 0x0020);
++
++ for (i = 0; i < 5; i++) {
++ rt305x_mii_write(esw, i, 31, 0x8000);
++ rt305x_mii_write(esw, i, 0, 0x3100);
++ rt305x_mii_write(esw, i, 30, 0xa000);
++ rt305x_mii_write(esw, i, 31, 0xa000);
++ rt305x_mii_write(esw, i, 16, 0x0606);
++ rt305x_mii_write(esw, i, 23, 0x0f0e);
++ rt305x_mii_write(esw, i, 24, 0x1610);
++ rt305x_mii_write(esw, i, 30, 0x1f15);
++ rt305x_mii_write(esw, i, 28, 0x6111);
++ rt305x_mii_write(esw, i, 31, 0x2000);
++ rt305x_mii_write(esw, i, 26, 0x0000);
++ }
++
++ /* 100Base AOI setting */
++ rt305x_mii_write(esw, 0, 31, 0x5000);
++ rt305x_mii_write(esw, 0, 19, 0x004a);
++ rt305x_mii_write(esw, 0, 20, 0x015a);
++ rt305x_mii_write(esw, 0, 21, 0x00ee);
++ rt305x_mii_write(esw, 0, 22, 0x0033);
++ rt305x_mii_write(esw, 0, 23, 0x020a);
++ rt305x_mii_write(esw, 0, 24, 0x0000);
++ rt305x_mii_write(esw, 0, 25, 0x024a);
++ rt305x_mii_write(esw, 0, 26, 0x035a);
++ rt305x_mii_write(esw, 0, 27, 0x02ee);
++ rt305x_mii_write(esw, 0, 28, 0x0233);
++ rt305x_mii_write(esw, 0, 29, 0x000a);
++ rt305x_mii_write(esw, 0, 30, 0x0000);
++ } else {
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7058);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0018);
++ }
++
++ /* PHY IOT */
++ /* select global register */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* tune TP_IDL tail and head waveform */
++ rt305x_mii_write(esw, 0, 22, 0x052f);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ }
++
++ if (esw->port_map)
++ port_map = esw->port_map;
++ else
++ port_map = RT305X_ESW_PMAP_LLLLLL;
++
++ /* Unused HW feature, but still nice to be consistent here...
++ * This is also exported to userspace ('lan' attribute) so it's
++ * conveniently usable to decide which ports go into the wan vlan by
++ * default.
++ */
++ esw_rmw(esw, RT305X_ESW_REG_SGC2,
++ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
++ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
++
++ /* make the switch leds blink */
++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
++ esw->ports[i].led = 0x05;
++
++ /* Only unmask the port change interrupt */
++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++}
++
++static irqreturn_t esw_interrupt(int irq, void *_esw)
++{
++ struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
++ u32 status;
++
++ status = esw_r32(esw, RT305X_ESW_REG_ISR);
++ if (status & RT305X_ESW_PORT_ST_CHG) {
++ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
++
++ link >>= RT305X_ESW_POA_LINK_SHIFT;
++ link &= RT305X_ESW_POA_LINK_MASK;
++ dev_info(esw->dev, "link changed 0x%02X\n", link);
++ }
++ esw_w32(esw, status, RT305X_ESW_REG_ISR);
++
++ return IRQ_HANDLED;
++}
++
++static int esw_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
++ struct device_node *np = pdev->dev.of_node;
++ const __be32 *port_map, *reg_init;
++ struct rt305x_esw *esw;
++ struct resource *irq;
++ int ret;
++
++ esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
++ if (!esw)
++ return -ENOMEM;
++
++ esw->dev = &pdev->dev;
++ esw->irq = irq->start;
++ esw->base = devm_ioremap_resource(&pdev->dev, res);
++ if (!esw->base)
++ return -EADDRNOTAVAIL;
++
++ port_map = of_get_property(np, "mediatek,portmap", NULL);
++ if (port_map)
++ esw->port_map = be32_to_cpu(*port_map);
++
++ reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
++ if (reg_init)
++ esw->reg_led_polarity = be32_to_cpu(*reg_init);
++
++ platform_set_drvdata(pdev, esw);
++
++ spin_lock_init(&esw->reg_rw_lock);
++
++ esw_hw_init(esw);
++
++ ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
++ esw);
++
++ if (!ret) {
++ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++ }
++
++ return ret;
++}
++
++static int esw_remove(struct platform_device *pdev)
++{
++ struct rt305x_esw *esw = platform_get_drvdata(pdev);
++
++ if (esw) {
++ esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id ralink_esw_match[] = {
++ { .compatible = "ralink,rt3050-esw" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_esw_match);
++
++static struct platform_driver esw_driver = {
++ .probe = esw_probe,
++ .remove = esw_remove,
++ .driver = {
++ .name = "rt3050-esw",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_esw_match,
++ },
++};
++
++int __init mtk_switch_init(void)
++{
++ return platform_driver_register(&esw_driver);
++}
++
++void mtk_switch_exit(void)
++{
++ platform_driver_unregister(&esw_driver);
++}
+diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.h b/drivers/net/ethernet/mediatek/esw_rt3050.h
+new file mode 100644
+index 0000000..455107a
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.h
+@@ -0,0 +1,29 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef _RALINK_ESW_RT3052_H__
++#define _RALINK_ESW_RT3052_H__
++
++#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
++
++int __init mtk_switch_init(void);
++void mtk_switch_exit(void);
++
++#else
++
++static inline int __init mtk_switch_init(void) { return 0; }
++static inline void mtk_switch_exit(void) { }
++
++#endif
++#endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch b/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch
new file mode 100644
index 0000000..a338f67
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch
@@ -0,0 +1,403 @@
+From 322a9598692943961791ac6e5a3f385b379dcdc3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:23:18 +0100
+Subject: [PATCH 503/513] net-next: mediatek: add switch driver for mt7620
+
+This driver is very basic and only provides basic init and irq support.
+Switchdev support for this device will follow.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/gsw_mt7620.c | 255 ++++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/gsw_mt7620.h | 117 +++++++++++++
+ 2 files changed, 372 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.c
+ create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.h
+
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.c b/drivers/net/ethernet/mediatek/gsw_mt7620.c
+new file mode 100644
+index 0000000..a37ed1b
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c
+@@ -0,0 +1,255 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/of_irq.h>
++
++#include <ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "gsw_mt7620.h"
++
++void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
++{
++ iowrite32(val, gsw->base + reg);
++}
++
++u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
++{
++ return ioread32(gsw->base + reg);
++}
++
++static irqreturn_t gsw_interrupt_mt7620(int irq, void *_priv)
++{
++ struct fe_priv *priv = (struct fe_priv *)_priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++ u32 status;
++ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
++
++ status = mtk_switch_r32(gsw, GSW_REG_ISR);
++ if (status & PORT_IRQ_ST_CHG)
++ for (i = 0; i <= max; i++) {
++ u32 status = mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i));
++ int link = status & 0x1;
++
++ if (link != priv->link[i])
++ mt7620_print_link_state(priv, i, link,
++ (status >> 2) & 3,
++ (status & 0x2));
++
++ priv->link[i] = link;
++ }
++ mtk_switch_w32(gsw, status, GSW_REG_ISR);
++
++ return IRQ_HANDLED;
++}
++
++static void mt7620_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
++{
++ u32 is_BGA = (rt_sysc_r32(0x0c) >> 16) & 1;
++
++ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
++ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
++
++ if (of_property_read_bool(np, "mediatek,mt7530")) {
++ u32 val;
++
++ /* turn off ephy and set phy base addr to 12 */
++ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) |
++ (0x1f << 24) | (0xc << 16),
++ GSW_REG_GPC1);
++
++ /* set MT7530 central align */
++ val = mt7530_mdio_r32(gsw, 0x7830);
++ val &= ~BIT(0);
++ val |= BIT(1);
++ mt7530_mdio_w32(gsw, 0x7830, val);
++
++ val = mt7530_mdio_r32(gsw, 0x7a40);
++ val &= ~BIT(30);
++ mt7530_mdio_w32(gsw, 0x7a40, val);
++
++ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
++ } else {
++ /* global page 4 */
++ _mt7620_mii_write(gsw, 1, 31, 0x4000);
++
++ _mt7620_mii_write(gsw, 1, 17, 0x7444);
++ if (is_BGA)
++ _mt7620_mii_write(gsw, 1, 19, 0x0114);
++ else
++ _mt7620_mii_write(gsw, 1, 19, 0x0117);
++
++ _mt7620_mii_write(gsw, 1, 22, 0x10cf);
++ _mt7620_mii_write(gsw, 1, 25, 0x6212);
++ _mt7620_mii_write(gsw, 1, 26, 0x0777);
++ _mt7620_mii_write(gsw, 1, 29, 0x4000);
++ _mt7620_mii_write(gsw, 1, 28, 0xc077);
++ _mt7620_mii_write(gsw, 1, 24, 0x0000);
++
++ /* global page 3 */
++ _mt7620_mii_write(gsw, 1, 31, 0x3000);
++ _mt7620_mii_write(gsw, 1, 17, 0x4838);
++
++ /* global page 2 */
++ _mt7620_mii_write(gsw, 1, 31, 0x2000);
++ if (is_BGA) {
++ _mt7620_mii_write(gsw, 1, 21, 0x0515);
++ _mt7620_mii_write(gsw, 1, 22, 0x0053);
++ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
++ _mt7620_mii_write(gsw, 1, 24, 0x0aaf);
++ _mt7620_mii_write(gsw, 1, 25, 0x0fad);
++ _mt7620_mii_write(gsw, 1, 26, 0x0fc1);
++ } else {
++ _mt7620_mii_write(gsw, 1, 21, 0x0517);
++ _mt7620_mii_write(gsw, 1, 22, 0x0fd2);
++ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
++ _mt7620_mii_write(gsw, 1, 24, 0x0aab);
++ _mt7620_mii_write(gsw, 1, 25, 0x00ae);
++ _mt7620_mii_write(gsw, 1, 26, 0x0fff);
++ }
++ /* global page 1 */
++ _mt7620_mii_write(gsw, 1, 31, 0x1000);
++ _mt7620_mii_write(gsw, 1, 17, 0xe7f8);
++ }
++
++ /* global page 0 */
++ _mt7620_mii_write(gsw, 1, 31, 0x8000);
++ _mt7620_mii_write(gsw, 0, 30, 0xa000);
++ _mt7620_mii_write(gsw, 1, 30, 0xa000);
++ _mt7620_mii_write(gsw, 2, 30, 0xa000);
++ _mt7620_mii_write(gsw, 3, 30, 0xa000);
++
++ _mt7620_mii_write(gsw, 0, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 1, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 2, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 3, 4, 0x05e1);
++
++ /* global page 2 */
++ _mt7620_mii_write(gsw, 1, 31, 0xa000);
++ _mt7620_mii_write(gsw, 0, 16, 0x1111);
++ _mt7620_mii_write(gsw, 1, 16, 0x1010);
++ _mt7620_mii_write(gsw, 2, 16, 0x1515);
++ _mt7620_mii_write(gsw, 3, 16, 0x0f0f);
++
++ /* CPU Port6 Force Link 1G, FC ON */
++ mtk_switch_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
++
++ /* Set Port 6 as CPU Port */
++ mtk_switch_w32(gsw, 0x7f7f7fe0, 0x0010);
++
++ /* setup port 4 */
++ if (gsw->port4 == PORT4_EPHY) {
++ u32 val = rt_sysc_r32(SYSC_REG_CFG1);
++
++ val |= 3 << 14;
++ rt_sysc_w32(val, SYSC_REG_CFG1);
++ _mt7620_mii_write(gsw, 4, 30, 0xa000);
++ _mt7620_mii_write(gsw, 4, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 4, 16, 0x1313);
++ pr_info("gsw: setting port4 to ephy mode\n");
++ }
++}
++
++static const struct of_device_id mediatek_gsw_match[] = {
++ { .compatible = "mediatek,mt7620-gsw" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
++
++int mtk_gsw_init(struct fe_priv *priv)
++{
++ struct device_node *np = priv->switch_np;
++ struct platform_device *pdev = of_find_device_by_node(np);
++ struct mt7620_gsw *gsw;
++
++ if (!pdev)
++ return -ENODEV;
++
++ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
++ return -EINVAL;
++
++ gsw = platform_get_drvdata(pdev);
++ priv->soc->swpriv = gsw;
++
++ mt7620_hw_init(gsw, np);
++
++ if (gsw->irq) {
++ request_irq(gsw->irq, gsw_interrupt_mt7620, 0,
++ "gsw", priv);
++ mtk_switch_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
++ }
++
++ return 0;
++}
++
++static int mt7620_gsw_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const char *port4 = NULL;
++ struct mt7620_gsw *gsw;
++ struct device_node *np;
++
++ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
++ if (!gsw)
++ return -ENOMEM;
++
++ gsw->base = devm_ioremap_resource(&pdev->dev, res);
++ if (!gsw->base)
++ return -EADDRNOTAVAIL;
++
++ gsw->dev = &pdev->dev;
++
++ of_property_read_string(np, "mediatek,port4", &port4);
++ if (port4 && !strcmp(port4, "ephy"))
++ gsw->port4 = PORT4_EPHY;
++ else if (port4 && !strcmp(port4, "gmac"))
++ gsw->port4 = PORT4_EXT;
++ else
++ gsw->port4 = PORT4_EPHY;
++
++ gsw->irq = irq_of_parse_and_map(np, 0);
++
++ platform_set_drvdata(pdev, gsw);
++
++ return 0;
++}
++
++static int mt7620_gsw_remove(struct platform_device *pdev)
++{
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver gsw_driver = {
++ .probe = mt7620_gsw_probe,
++ .remove = mt7620_gsw_remove,
++ .driver = {
++ .name = "mt7620-gsw",
++ .owner = THIS_MODULE,
++ .of_match_table = mediatek_gsw_match,
++ },
++};
++
++module_platform_driver(gsw_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7620 SoC");
++MODULE_VERSION(MTK_FE_DRV_VERSION);
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.h b/drivers/net/ethernet/mediatek/gsw_mt7620.h
+new file mode 100644
+index 0000000..0d6ee84
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
+@@ -0,0 +1,117 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef _RALINK_GSW_MT7620_H__
++#define _RALINK_GSW_MT7620_H__
++
++#define GSW_REG_PHY_TIMEOUT (5 * HZ)
++
++#ifdef CONFIG_SOC_MT7621
++#define MT7620A_GSW_REG_PIAC 0x0004
++#else
++#define MT7620A_GSW_REG_PIAC 0x7004
++#endif
++
++#define GSW_NUM_VLANS 16
++#define GSW_NUM_VIDS 4096
++#define GSW_NUM_PORTS 7
++#define GSW_PORT6 6
++
++#define GSW_MDIO_ACCESS BIT(31)
++#define GSW_MDIO_READ BIT(19)
++#define GSW_MDIO_WRITE BIT(18)
++#define GSW_MDIO_START BIT(16)
++#define GSW_MDIO_ADDR_SHIFT 20
++#define GSW_MDIO_REG_SHIFT 25
++
++#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
++#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
++#define GSW_REG_SMACCR0 0x3fE4
++#define GSW_REG_SMACCR1 0x3fE8
++#define GSW_REG_CKGCR 0x3ff0
++
++#define GSW_REG_IMR 0x7008
++#define GSW_REG_ISR 0x700c
++#define GSW_REG_GPC1 0x7014
++
++#define SYSC_REG_CHIP_REV_ID 0x0c
++#define SYSC_REG_CFG1 0x14
++#define RST_CTRL_MCM BIT(2)
++#define SYSC_PAD_RGMII2_MDIO 0x58
++#define SYSC_GPIO_MODE 0x60
++
++#define PORT_IRQ_ST_CHG 0x7f
++
++#ifdef CONFIG_SOC_MT7621
++#define ESW_PHY_POLLING 0x0000
++#else
++#define ESW_PHY_POLLING 0x7000
++#endif
++
++#define PMCR_IPG BIT(18)
++#define PMCR_MAC_MODE BIT(16)
++#define PMCR_FORCE BIT(15)
++#define PMCR_TX_EN BIT(14)
++#define PMCR_RX_EN BIT(13)
++#define PMCR_BACKOFF BIT(9)
++#define PMCR_BACKPRES BIT(8)
++#define PMCR_RX_FC BIT(5)
++#define PMCR_TX_FC BIT(4)
++#define PMCR_SPEED(_x) (_x << 2)
++#define PMCR_DUPLEX BIT(1)
++#define PMCR_LINK BIT(0)
++
++#define PHY_AN_EN BIT(31)
++#define PHY_PRE_EN BIT(30)
++#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
++
++enum {
++ /* Global attributes. */
++ GSW_ATTR_ENABLE_VLAN,
++ /* Port attributes. */
++ GSW_ATTR_PORT_UNTAG,
++};
++
++enum {
++ PORT4_EPHY = 0,
++ PORT4_EXT,
++};
++
++struct mt7620_gsw {
++ struct device *dev;
++ void __iomem *base;
++ int irq;
++ int port4;
++ unsigned long int autopoll;
++};
++
++void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg);
++u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg);
++int mtk_gsw_init(struct fe_priv *priv);
++
++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
++int mt7620_has_carrier(struct fe_priv *priv);
++void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
++ int speed, int duplex);
++
++void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val);
++u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg);
++
++u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
++ u32 phy_register, u32 write_data);
++u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
++
++#endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch b/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch
new file mode 100644
index 0000000..5a3f75a
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch
@@ -0,0 +1,307 @@
+From 9fc19d5f7354709298dcb15b3a4c7cd9a18acebf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:24:46 +0100
+Subject: [PATCH 504/513] net-next: mediatek: add switch driver for mt7621
+
+This driver is very basic and only provides basic init and irq support.
+Switchdev support for this device will follow.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/gsw_mt7621.c | 284 ++++++++++++++++++++++++++++
+ 1 file changed, 284 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7621.c
+
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7621.c b/drivers/net/ethernet/mediatek/gsw_mt7621.c
+new file mode 100644
+index 0000000..500841f
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c
+@@ -0,0 +1,284 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/of_irq.h>
++
++#include <ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "gsw_mt7620.h"
++
++void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
++{
++ iowrite32(val, gsw->base + reg);
++}
++
++u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
++{
++ return ioread32(gsw->base + reg);
++}
++
++static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
++{
++ struct fe_priv *priv = (struct fe_priv *)_priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++ u32 reg, i;
++
++ reg = mt7530_mdio_r32(gsw, 0x700c);
++
++ for (i = 0; i < 5; i++)
++ if (reg & BIT(i)) {
++ unsigned int link;
++
++ link = mt7530_mdio_r32(gsw,
++ 0x3008 + (i * 0x100)) & 0x1;
++
++ if (link != priv->link[i]) {
++ priv->link[i] = link;
++ if (link)
++ netdev_info(priv->netdev,
++ "port %d link up\n", i);
++ else
++ netdev_info(priv->netdev,
++ "port %d link down\n", i);
++ }
++ }
++
++ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
++
++ return IRQ_HANDLED;
++}
++
++static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
++{
++ u32 i;
++ u32 val;
++
++ /* wardware reset the switch */
++ fe_reset(RST_CTRL_MCM);
++ mdelay(10);
++
++ /* reduce RGMII2 PAD driving strength */
++ rt_sysc_m32(3 << 4, 0, SYSC_PAD_RGMII2_MDIO);
++
++ /* gpio mux - RGMII1=Normal mode */
++ rt_sysc_m32(BIT(14), 0, SYSC_GPIO_MODE);
++
++ /* set GMAC1 RGMII mode */
++ rt_sysc_m32(3 << 12, 0, SYSC_REG_CFG1);
++
++ /* enable MDIO to control MT7530 */
++ rt_sysc_m32(3 << 12, 0, SYSC_GPIO_MODE);
++
++ /* turn off all PHYs */
++ for (i = 0; i <= 4; i++) {
++ val = _mt7620_mii_read(gsw, i, 0x0);
++ val |= BIT(11);
++ _mt7620_mii_write(gsw, i, 0x0, val);
++ }
++
++ /* reset the switch */
++ mt7530_mdio_w32(gsw, 0x7000, 0x3);
++ usleep_range(10, 20);
++
++ if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) {
++ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
++ mtk_switch_w32(gsw, 0x2105e30b, 0x100);
++ mt7530_mdio_w32(gsw, 0x3600, 0x5e30b);
++ } else {
++ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
++ mtk_switch_w32(gsw, 0x2105e33b, 0x100);
++ mt7530_mdio_w32(gsw, 0x3600, 0x5e33b);
++ }
++
++ /* (GE2, Link down) */
++ mtk_switch_w32(gsw, 0x8000, 0x200);
++
++ /* Enable Port 6, P5 as GMAC5, P5 disable */
++ val = mt7530_mdio_r32(gsw, 0x7804);
++ val &= ~BIT(8);
++ val |= BIT(6) | BIT(13) | BIT(16);
++ mt7530_mdio_w32(gsw, 0x7804, val);
++
++ val = rt_sysc_r32(0x10);
++ val = (val >> 6) & 0x7;
++ if (val >= 6) {
++ /* 25Mhz Xtal - do nothing */
++ } else if (val >= 3) {
++ /* 40Mhz */
++
++ /* disable MT7530 core clock */
++ _mt7620_mii_write(gsw, 0, 13, 0x1f);
++ _mt7620_mii_write(gsw, 0, 14, 0x410);
++ _mt7620_mii_write(gsw, 0, 13, 0x401f);
++ _mt7620_mii_write(gsw, 0, 14, 0x0);
++
++ /* disable MT7530 PLL */
++ _mt7620_mii_write(gsw, 0, 13, 0x1f);
++ _mt7620_mii_write(gsw, 0, 14, 0x40d);
++ _mt7620_mii_write(gsw, 0, 13, 0x401f);
++ _mt7620_mii_write(gsw, 0, 14, 0x2020);
++
++ /* for MT7530 core clock = 500Mhz */
++ _mt7620_mii_write(gsw, 0, 13, 0x1f);
++ _mt7620_mii_write(gsw, 0, 14, 0x40e);
++ _mt7620_mii_write(gsw, 0, 13, 0x401f);
++ _mt7620_mii_write(gsw, 0, 14, 0x119);
++
++ /* enable MT7530 PLL */
++ _mt7620_mii_write(gsw, 0, 13, 0x1f);
++ _mt7620_mii_write(gsw, 0, 14, 0x40d);
++ _mt7620_mii_write(gsw, 0, 13, 0x401f);
++ _mt7620_mii_write(gsw, 0, 14, 0x2820);
++
++ usleep_range(20, 40);
++
++ /* enable MT7530 core clock */
++ _mt7620_mii_write(gsw, 0, 13, 0x1f);
++ _mt7620_mii_write(gsw, 0, 14, 0x410);
++ _mt7620_mii_write(gsw, 0, 13, 0x401f);
++ } else {
++ /* 20Mhz Xtal - TODO */
++ }
++
++ /* RGMII */
++ _mt7620_mii_write(gsw, 0, 14, 0x1);
++
++ /* set MT7530 central align */
++ val = mt7530_mdio_r32(gsw, 0x7830);
++ val &= ~BIT(0);
++ val |= BIT(1);
++ mt7530_mdio_w32(gsw, 0x7830, val);
++ val = mt7530_mdio_r32(gsw, 0x7a40);
++ val &= ~BIT(30);
++ mt7530_mdio_w32(gsw, 0x7a40, val);
++ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
++
++ /* delay setting for 10/1000M */
++ mt7530_mdio_w32(gsw, 0x7b00, 0x102);
++ mt7530_mdio_w32(gsw, 0x7b04, 0x14);
++
++ /* lower Tx Driving*/
++ mt7530_mdio_w32(gsw, 0x7a54, 0x44);
++ mt7530_mdio_w32(gsw, 0x7a5c, 0x44);
++ mt7530_mdio_w32(gsw, 0x7a64, 0x44);
++ mt7530_mdio_w32(gsw, 0x7a6c, 0x44);
++ mt7530_mdio_w32(gsw, 0x7a74, 0x44);
++ mt7530_mdio_w32(gsw, 0x7a7c, 0x44);
++
++ /* turn on all PHYs */
++ for (i = 0; i <= 4; i++) {
++ val = _mt7620_mii_read(gsw, i, 0);
++ val &= ~BIT(11);
++ _mt7620_mii_write(gsw, i, 0, val);
++ }
++
++ /* enable irq */
++ val = mt7530_mdio_r32(gsw, 0x7808);
++ val |= 3 << 16;
++ mt7530_mdio_w32(gsw, 0x7808, val);
++}
++
++static const struct of_device_id mediatek_gsw_match[] = {
++ { .compatible = "mediatek,mt7621-gsw" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
++
++int mtk_gsw_init(struct fe_priv *priv)
++{
++ struct device_node *np = priv->switch_np;
++ struct platform_device *pdev = of_find_device_by_node(np);
++ struct mt7620_gsw *gsw;
++
++ if (!pdev)
++ return -ENODEV;
++
++ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
++ return -EINVAL;
++
++ gsw = platform_get_drvdata(pdev);
++ priv->soc->swpriv = gsw;
++
++ mt7621_hw_init(gsw, np);
++
++ if (gsw->irq) {
++ request_irq(gsw->irq, gsw_interrupt_mt7621, 0,
++ "gsw", priv);
++ mt7530_mdio_w32(gsw, 0x7008, 0x1f);
++ }
++
++ return 0;
++}
++
++static int mt7621_gsw_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const char *port4 = NULL;
++ struct mt7620_gsw *gsw;
++ struct device_node *np;
++
++ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
++ if (!gsw)
++ return -ENOMEM;
++
++ gsw->base = devm_ioremap_resource(&pdev->dev, res);
++ if (!gsw->base)
++ return -EADDRNOTAVAIL;
++
++ gsw->dev = &pdev->dev;
++
++ of_property_read_string(np, "mediatek,port4", &port4);
++ if (port4 && !strcmp(port4, "ephy"))
++ gsw->port4 = PORT4_EPHY;
++ else if (port4 && !strcmp(port4, "gmac"))
++ gsw->port4 = PORT4_EXT;
++ else
++ gsw->port4 = PORT4_EPHY;
++
++ gsw->irq = irq_of_parse_and_map(np, 0);
++
++ platform_set_drvdata(pdev, gsw);
++
++ return 0;
++}
++
++static int mt7621_gsw_remove(struct platform_device *pdev)
++{
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver gsw_driver = {
++ .probe = mt7621_gsw_probe,
++ .remove = mt7621_gsw_remove,
++ .driver = {
++ .name = "mt7621-gsw",
++ .owner = THIS_MODULE,
++ .of_match_table = mediatek_gsw_match,
++ },
++};
++
++module_platform_driver(gsw_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7621 SoC");
++MODULE_VERSION(MTK_FE_DRV_VERSION);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch b/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch
new file mode 100644
index 0000000..7597b2a
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch
@@ -0,0 +1,363 @@
+From f8c8f4bd2a13e0cc060c93812377373d436f7f02 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 18 Nov 2015 03:13:05 +0100
+Subject: [PATCH 505/513] net-next: mediatek: add support for rt2880
+
+rt2880 is the oldest SoC with this core. It has a single gBit port that will
+normally be attached to an external phy of switch. The patch also adds the
+code required to drive the mdio bus.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/mdio_rt2880.c | 222 +++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/mdio_rt2880.h | 23 +++
+ drivers/net/ethernet/mediatek/soc_rt2880.c | 76 +++++++++
+ 3 files changed, 321 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/mdio_rt2880.c
+ create mode 100644 drivers/net/ethernet/mediatek/mdio_rt2880.h
+ create mode 100644 drivers/net/ethernet/mediatek/soc_rt2880.c
+
+diff --git a/drivers/net/ethernet/mediatek/mdio_rt2880.c b/drivers/net/ethernet/mediatek/mdio_rt2880.c
+new file mode 100644
+index 0000000..eb9df6e
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mdio_rt2880.c
+@@ -0,0 +1,222 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio_rt2880.h"
++#include "mdio.h"
++
++#define FE_MDIO_RETRY 1000
++
++static unsigned char *rt2880_speed_str(struct fe_priv *priv)
++{
++ switch (priv->phy->speed[0]) {
++ case SPEED_1000:
++ return "1000";
++ case SPEED_100:
++ return "100";
++ case SPEED_10:
++ return "10";
++ }
++
++ return "?";
++}
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++ u32 mdio_cfg;
++
++ if (!priv->link[0]) {
++ netif_carrier_off(priv->netdev);
++ netdev_info(priv->netdev, "link down\n");
++ return;
++ }
++
++ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
++ FE_MDIO_CFG_RX_CLK_SKEW_200 |
++ FE_MDIO_CFG_GP1_FRC_EN;
++
++ if (priv->phy->duplex[0] == DUPLEX_FULL)
++ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
++
++ if (priv->phy->tx_fc[0])
++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
++
++ if (priv->phy->rx_fc[0])
++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
++
++ switch (priv->phy->speed[0]) {
++ case SPEED_10:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
++ break;
++ case SPEED_100:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
++ break;
++ case SPEED_1000:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
++ break;
++ default:
++ BUG();
++ }
++
++ fe_w32(mdio_cfg, FE_MDIO_CFG);
++
++ netif_carrier_on(priv->netdev);
++ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
++ rt2880_speed_str(priv),
++ (priv->phy->duplex[0] == DUPLEX_FULL) ? "Full" : "Half");
++}
++
++static int rt2880_mdio_wait_ready(struct fe_priv *priv)
++{
++ int retries;
++
++ retries = FE_MDIO_RETRY;
++ while (1) {
++ u32 t;
++
++ t = fe_r32(FE_MDIO_ACCESS);
++ if ((t & BIT(31)) == 0)
++ return 0;
++
++ if (retries-- == 0)
++ break;
++
++ udelay(1);
++ }
++
++ dev_err(priv->device, "MDIO operation timed out\n");
++ return -ETIMEDOUT;
++}
++
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ struct fe_priv *priv = bus->priv;
++ int err;
++ u32 t;
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return 0xffff;
++
++ t = (phy_addr << 24) | (phy_reg << 16);
++ fe_w32(t, FE_MDIO_ACCESS);
++ t |= BIT(31);
++ fe_w32(t, FE_MDIO_ACCESS);
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return 0xffff;
++
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
++}
++
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++ struct fe_priv *priv = bus->priv;
++ int err;
++ u32 t;
++
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return err;
++
++ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
++ fe_w32(t, FE_MDIO_ACCESS);
++ t |= BIT(31);
++ fe_w32(t, FE_MDIO_ACCESS);
++
++ return rt2880_mdio_wait_ready(priv);
++}
++
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
++{
++ const __be32 *id = of_get_property(np, "reg", NULL);
++ const __be32 *link;
++ int size;
++ int phy_mode;
++
++ if (!id || (be32_to_cpu(*id) != 0)) {
++ pr_err("%s: invalid port id\n", np->name);
++ return;
++ }
++
++ priv->phy->phy_fixed[0] = of_get_property(np,
++ "mediatek,fixed-link", &size);
++ if (priv->phy->phy_fixed[0] &&
++ (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
++ pr_err("%s: invalid fixed link property\n", np->name);
++ priv->phy->phy_fixed[0] = NULL;
++ return;
++ }
++
++ phy_mode = of_get_phy_mode(np);
++ switch (phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ break;
++ case PHY_INTERFACE_MODE_MII:
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ break;
++ default:
++ if (!priv->phy->phy_fixed[0])
++ dev_err(priv->device, "port %d - invalid phy mode\n",
++ priv->phy->speed[0]);
++ break;
++ }
++
++ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
++ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
++ return;
++
++ if (priv->phy->phy_fixed[0]) {
++ link = priv->phy->phy_fixed[0];
++ priv->phy->speed[0] = be32_to_cpup(link++);
++ priv->phy->duplex[0] = be32_to_cpup(link++);
++ priv->phy->tx_fc[0] = be32_to_cpup(link++);
++ priv->phy->rx_fc[0] = be32_to_cpup(link++);
++
++ priv->link[0] = 1;
++ switch (priv->phy->speed[0]) {
++ case SPEED_10:
++ break;
++ case SPEED_100:
++ break;
++ case SPEED_1000:
++ break;
++ default:
++ dev_err(priv->device, "invalid link speed: %d\n",
++ priv->phy->speed[0]);
++ priv->phy->phy_fixed[0] = 0;
++ return;
++ }
++ dev_info(priv->device, "using fixed link parameters\n");
++ rt2880_mdio_link_adjust(priv, 0);
++ return;
++ }
++
++ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0])
++ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
++}
+diff --git a/drivers/net/ethernet/mediatek/mdio_rt2880.h b/drivers/net/ethernet/mediatek/mdio_rt2880.h
+new file mode 100644
+index 0000000..6884894
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mdio_rt2880.h
+@@ -0,0 +1,23 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#ifndef _RALINK_MDIO_RT2880_H__
++#define _RALINK_MDIO_RT2880_H__
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
++
++#endif
+diff --git a/drivers/net/ethernet/mediatek/soc_rt2880.c b/drivers/net/ethernet/mediatek/soc_rt2880.c
+new file mode 100644
+index 0000000..0792dab
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/soc_rt2880.c
+@@ -0,0 +1,76 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio_rt2880.h"
++
++#define RT2880_RESET_FE BIT(18)
++
++static void rt2880_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
++ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
++ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_TX;
++ /* this should work according to the datasheet but actually does not*/
++ /* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
++}
++
++void rt2880_fe_reset(void)
++{
++ fe_reset(RT2880_RESET_FE);
++}
++
++static int rt2880_fwd_config(struct fe_priv *priv)
++{
++ int ret;
++
++ ret = fe_set_clock_cycle(priv);
++ if (ret)
++ return ret;
++
++ fe_fwd_config(priv);
++ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
++ fe_csum_config(priv);
++
++ return ret;
++}
++
++struct fe_soc_data rt2880_data = {
++ .init_data = rt2880_init_data,
++ .reset_fe = rt2880_fe_reset,
++ .fwd_config = rt2880_fwd_config,
++ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_int = FE_RX_DONE_INT,
++ .tx_int = FE_TX_DONE_INT,
++ .status_int = FE_CNT_GDM_AF,
++ .mdio_read = rt2880_mdio_read,
++ .mdio_write = rt2880_mdio_write,
++ .mdio_adjust_link = rt2880_mdio_link_adjust,
++ .port_init = rt2880_port_init,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch
new file mode 100644
index 0000000..69e06b0
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch
@@ -0,0 +1,229 @@
+From a3555658ce5dd97df3dc225289b92800da9d38ba Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:28:51 +0100
+Subject: [PATCH 506/513] net-next: mediatek: add support for rt3050
+
+Add support for SoCs from the rt3050 family. This include rt3050, rt3052,
+rt3352 and rt5350. These all have a builtin 5 port 100mbit switch. This patch
+includes rudimentary code to power up the switch. There are a lot of magic
+values that get written to the switch and the internal phys. These values
+come straight from the SDK driver and we do not know the meaning of most of
+them.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/esw_rt3050.c | 18 +---
+ drivers/net/ethernet/mediatek/soc_rt3050.c | 158 ++++++++++++++++++++++++++++
+ 2 files changed, 159 insertions(+), 17 deletions(-)
+ create mode 100644 drivers/net/ethernet/mediatek/soc_rt3050.c
+
+diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c
+index f07f4a5..670ae16 100644
+--- a/drivers/net/ethernet/mediatek/esw_rt3050.c
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
+@@ -14,27 +14,11 @@
+
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+-#include <linux/types.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/init.h>
+-#include <linux/skbuff.h>
+-#include <linux/etherdevice.h>
+-#include <linux/ethtool.h>
+ #include <linux/platform_device.h>
+-#include <linux/of_device.h>
+-#include <linux/clk.h>
+-#include <linux/of_net.h>
+-#include <linux/of_mdio.h>
+-
+ #include <asm/mach-ralink/ralink_regs.h>
+
+ #include "mtk_eth_soc.h"
+
+-#include <linux/ioport.h>
+-#include <linux/mii.h>
+-
+-#include <ralink_regs.h>
+-
+ /* HW limitations for this switch:
+ * - No large frame support (PKT_MAX_LEN at most 1536)
+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
+@@ -559,7 +543,7 @@ static irqreturn_t esw_interrupt(int irq, void *_esw)
+
+ static int esw_probe(struct platform_device *pdev)
+ {
+- struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct device_node *np = pdev->dev.of_node;
+ const __be32 *port_map, *reg_init;
+ struct rt305x_esw *esw;
+diff --git a/drivers/net/ethernet/mediatek/soc_rt3050.c b/drivers/net/ethernet/mediatek/soc_rt3050.c
+new file mode 100644
+index 0000000..228c94f
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/soc_rt3050.c
+@@ -0,0 +1,158 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio_rt2880.h"
++
++#define RT305X_RESET_FE BIT(21)
++#define RT305X_RESET_ESW BIT(23)
++
++static const u16 rt5350_reg_table[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++ [FE_REG_FE_RST_GL] = 0,
++ [FE_REG_FE_DMA_VID_BASE] = 0,
++};
++
++static void rt305x_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
++ FE_FLAG_CALIBRATE_CLK | FE_FLAG_HAS_SWITCH;
++ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
++ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
++}
++
++static int rt3050_fwd_config(struct fe_priv *priv)
++{
++ int ret;
++
++ if (ralink_soc != RT305X_SOC_RT3052) {
++ ret = fe_set_clock_cycle(priv);
++ if (ret)
++ return ret;
++ }
++
++ fe_fwd_config(priv);
++ if (ralink_soc != RT305X_SOC_RT3352)
++ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
++ fe_csum_config(priv);
++
++ return 0;
++}
++
++static void rt305x_fe_reset(void)
++{
++ fe_reset(RT305X_RESET_FE);
++}
++
++static void rt5350_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_HAS_SWITCH;
++ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
++}
++
++static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ RT5350_SDM_MAC_ADRL);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static void rt5350_rxcsum_config(bool enable)
++{
++ if (enable)
++ fe_w32(fe_r32(RT5350_SDM_CFG) | (RT5350_SDM_ICS_EN |
++ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
++ RT5350_SDM_CFG);
++ else
++ fe_w32(fe_r32(RT5350_SDM_CFG) & ~(RT5350_SDM_ICS_EN |
++ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
++ RT5350_SDM_CFG);
++}
++
++static int rt5350_fwd_config(struct fe_priv *priv)
++{
++ struct net_device *dev = priv_netdev(priv);
++
++ rt5350_rxcsum_config((dev->features & NETIF_F_RXCSUM));
++
++ return 0;
++}
++
++static void rt5350_tx_dma(struct fe_tx_dma *txd)
++{
++ txd->txd4 = 0;
++}
++
++static void rt5350_fe_reset(void)
++{
++ fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
++}
++
++static struct fe_soc_data rt3050_data = {
++ .init_data = rt305x_init_data,
++ .reset_fe = rt305x_fe_reset,
++ .fwd_config = rt3050_fwd_config,
++ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_int = FE_RX_DONE_INT,
++ .tx_int = FE_TX_DONE_INT,
++ .status_int = FE_CNT_GDM_AF,
++};
++
++static struct fe_soc_data rt5350_data = {
++ .init_data = rt5350_init_data,
++ .reg_table = rt5350_reg_table,
++ .reset_fe = rt5350_fe_reset,
++ .set_mac = rt5350_set_mac,
++ .fwd_config = rt5350_fwd_config,
++ .tx_dma = rt5350_tx_dma,
++ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_int = RT5350_RX_DONE_INT,
++ .tx_int = RT5350_TX_DONE_INT,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
++ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch b/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch
new file mode 100644
index 0000000..1b98155
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch
@@ -0,0 +1,100 @@
+From 5ad283c69029a519681ed453e7f7ddf250c10559 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 18 Nov 2015 03:51:24 +0100
+Subject: [PATCH 507/513] net-next: mediatek: add support for rt3883
+
+Add support for rt3883 and its smaller version rt3662. They both have a single
+gBit port that will normally be attached to an external phy of switch.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/soc_rt3883.c | 75 ++++++++++++++++++++++++++++
+ 1 file changed, 75 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/soc_rt3883.c
+
+diff --git a/drivers/net/ethernet/mediatek/soc_rt3883.c b/drivers/net/ethernet/mediatek/soc_rt3883.c
+new file mode 100644
+index 0000000..7f34d4d
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/soc_rt3883.c
+@@ -0,0 +1,75 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "mdio_rt2880.h"
++
++#define RT3883_RSTCTRL_FE BIT(21)
++
++static void rt3883_fe_reset(void)
++{
++ fe_reset(RT3883_RSTCTRL_FE);
++}
++
++static int rt3883_fwd_config(struct fe_priv *priv)
++{
++ int ret;
++
++ ret = fe_set_clock_cycle(priv);
++ if (ret)
++ return ret;
++
++ fe_fwd_config(priv);
++ fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
++ fe_csum_config(priv);
++
++ return ret;
++}
++
++static void rt3883_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
++ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
++ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
++ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
++}
++
++static struct fe_soc_data rt3883_data = {
++ .init_data = rt3883_init_data,
++ .reset_fe = rt3883_fe_reset,
++ .fwd_config = rt3883_fwd_config,
++ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
++ .rx_int = FE_RX_DONE_INT,
++ .tx_int = FE_TX_DONE_INT,
++ .status_int = FE_CNT_GDM_AF,
++ .checksum_bit = RX_DMA_L4VALID,
++ .mdio_read = rt2880_mdio_read,
++ .mdio_write = rt2880_mdio_write,
++ .mdio_adjust_link = rt2880_mdio_link_adjust,
++ .port_init = rt2880_port_init,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch b/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch
new file mode 100644
index 0000000..83e0424
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch
@@ -0,0 +1,528 @@
+From 1efca7b539a91c49ab1d6484ec3a69c48fa6062b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:25:35 +0100
+Subject: [PATCH 508/513] net-next: mediatek: add support for mt7620
+
+Add support for SoCs from the mt7620 family. This include mt7620 and mt7621.
+These all have one dedicated external gbit port and a builtin 5 port 100mbit
+switch. Additionally one of the 5 switch ports can be changed to become an
+additional gbit port that we can attach a phy to. This patch includes
+rudimentary code to power up the switch. There are a lot of magic values
+that get written to the switch and the internal phys. These values come
+straight from the SDK driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/mdio_mt7620.c | 156 +++++++++++++
+ drivers/net/ethernet/mediatek/soc_mt7620.c | 334 +++++++++++++++++++++++++++
+ 2 files changed, 490 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/mdio_mt7620.c
+ create mode 100644 drivers/net/ethernet/mediatek/soc_mt7620.c
+
+diff --git a/drivers/net/ethernet/mediatek/mdio_mt7620.c b/drivers/net/ethernet/mediatek/mdio_mt7620.c
+new file mode 100644
+index 0000000..89c6c30
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c
+@@ -0,0 +1,156 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++
++#include "mtk_eth_soc.h"
++#include "gsw_mt7620.h"
++#include "mdio.h"
++
++static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
++{
++ unsigned long t_start = jiffies;
++
++ while (1) {
++ if (!(mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
++ return 0;
++ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT))
++ break;
++ }
++
++ dev_err(gsw->dev, "mdio: MDIO timeout\n");
++ return -1;
++}
++
++u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
++ u32 phy_register, u32 write_data)
++{
++ if (mt7620_mii_busy_wait(gsw))
++ return -1;
++
++ write_data &= 0xffff;
++
++ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
++ (phy_register << GSW_MDIO_REG_SHIFT) |
++ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
++ MT7620A_GSW_REG_PIAC);
++
++ if (mt7620_mii_busy_wait(gsw))
++ return -1;
++
++ return 0;
++}
++
++u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg)
++{
++ u32 d;
++
++ if (mt7620_mii_busy_wait(gsw))
++ return 0xffff;
++
++ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
++ (phy_reg << GSW_MDIO_REG_SHIFT) |
++ (phy_addr << GSW_MDIO_ADDR_SHIFT),
++ MT7620A_GSW_REG_PIAC);
++
++ if (mt7620_mii_busy_wait(gsw))
++ return 0xffff;
++
++ d = mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
++
++ return d;
++}
++
++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++ struct fe_priv *priv = bus->priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++
++ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
++}
++
++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ struct fe_priv *priv = bus->priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++
++ return _mt7620_mii_read(gsw, phy_addr, phy_reg);
++}
++
++void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val)
++{
++ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ _mt7620_mii_write(gsw, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
++ _mt7620_mii_write(gsw, 0x1f, 0x10, val >> 16);
++}
++
++u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg)
++{
++ u16 high, low;
++
++ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ low = _mt7620_mii_read(gsw, 0x1f, (reg >> 2) & 0xf);
++ high = _mt7620_mii_read(gsw, 0x1f, 0x10);
++
++ return (high << 16) | (low & 0xffff);
++}
++
++static unsigned char *fe_speed_str(int speed)
++{
++ switch (speed) {
++ case 2:
++ case SPEED_1000:
++ return "1000";
++ case 1:
++ case SPEED_100:
++ return "100";
++ case 0:
++ case SPEED_10:
++ return "10";
++ }
++
++ return "? ";
++}
++
++int mt7620_has_carrier(struct fe_priv *priv)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++ int i;
++
++ for (i = 0; i < GSW_PORT6; i++)
++ if (mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
++ return 1;
++ return 0;
++}
++
++
++void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
++ int speed, int duplex)
++{
++ if (link)
++ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++ port, fe_speed_str(speed),
++ (duplex) ? "Full" : "Half");
++ else
++ netdev_info(priv->netdev, "port %d link down\n", port);
++}
++
++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++ mt7620_print_link_state(priv, port, priv->link[port],
++ priv->phy->speed[port],
++ (priv->phy->duplex[port] == DUPLEX_FULL));
++}
+diff --git a/drivers/net/ethernet/mediatek/soc_mt7620.c b/drivers/net/ethernet/mediatek/soc_mt7620.c
+new file mode 100644
+index 0000000..9ad6bc9
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/soc_mt7620.c
+@@ -0,0 +1,334 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/if_vlan.h>
++#include <linux/of_net.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include <mt7620.h>
++#include "mtk_eth_soc.h"
++#include "gsw_mt7620.h"
++#include "mt7530.h"
++#include "mdio.h"
++
++#define MT7620A_CDMA_CSG_CFG 0x400
++#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
++#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
++#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
++#define MT7620A_RESET_FE BIT(21)
++#define MT7621_RESET_FE BIT(6)
++#define MT7620A_RESET_ESW BIT(23)
++#define MT7620_L4_VALID BIT(23)
++#define MT7621_L4_VALID BIT(24)
++
++#define MT7620_TX_DMA_UDF BIT(15)
++#define MT7621_TX_DMA_UDF BIT(19)
++#define TX_DMA_FP_BMAP ((0xff) << 19)
++
++#define CDMA_ICS_EN BIT(2)
++#define CDMA_UCS_EN BIT(1)
++#define CDMA_TCS_EN BIT(0)
++
++#define GDMA_ICS_EN BIT(22)
++#define GDMA_TCS_EN BIT(21)
++#define GDMA_UCS_EN BIT(20)
++
++/* frame engine counters */
++#define MT7620_REG_MIB_OFFSET 0x1000
++#define MT7620_PPE_AC_BCNT0 (MT7620_REG_MIB_OFFSET + 0x00)
++#define MT7620_GDM1_TX_GBCNT (MT7620_REG_MIB_OFFSET + 0x300)
++#define MT7620_GDM2_TX_GBCNT (MT7620_GDM1_TX_GBCNT + 0x40)
++
++#define MT7621_REG_MIB_OFFSET 0x2000
++#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
++#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
++#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
++
++#define GSW_REG_GDMA1_MAC_ADRL 0x508
++#define GSW_REG_GDMA1_MAC_ADRH 0x50C
++
++#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
++#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
++
++/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
++ * but after test it should be BIT(13).
++ */
++#define MT7620_FE_GDM1_AF BIT(13)
++#define MT7621_FE_GDM1_AF BIT(28)
++#define MT7621_FE_GDM2_AF BIT(29)
++
++static const u16 mt7620_reg_table[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
++ [FE_REG_FE_COUNTER_BASE] = MT7620_GDM1_TX_GBCNT,
++ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
++ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
++};
++
++static int mt7620_gsw_config(struct fe_priv *priv)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++ /* is the mt7530 internal or external */
++ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f]) {
++ mt7530_probe(priv->device, gsw->base, NULL, 0);
++ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
++ } else {
++ mt7530_probe(priv->device, gsw->base, NULL, 1);
++ }
++
++ return 0;
++}
++
++static void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ mtk_switch_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
++ mtk_switch_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ GSW_REG_SMACCR0);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static void mt7620_auto_poll(struct mt7620_gsw *gsw)
++{
++ int phy;
++ int lsb = -1, msb = 0;
++
++ for_each_set_bit(phy, &gsw->autopoll, 32) {
++ if (lsb < 0)
++ lsb = phy;
++ msb = phy;
++ }
++
++ if (lsb == msb)
++ lsb--;
++
++ mtk_switch_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) |
++ (msb << 8) | lsb, ESW_PHY_POLLING);
++}
++
++static void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
++ const __be32 *_id = of_get_property(np, "reg", NULL);
++ int phy_mode, size, id;
++ int shift = 12;
++ u32 val, mask = 0;
++ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
++
++ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
++ if (_id)
++ pr_err("%s: invalid port id %d\n", np->name,
++ be32_to_cpu(*_id));
++ else
++ pr_err("%s: invalid port id\n", np->name);
++ return;
++ }
++
++ id = be32_to_cpu(*_id);
++
++ if (id == 4)
++ shift = 14;
++
++ priv->phy->phy_fixed[id] = of_get_property(np, "mediatek,fixed-link",
++ &size);
++ if (priv->phy->phy_fixed[id] &&
++ (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
++ pr_err("%s: invalid fixed link property\n", np->name);
++ priv->phy->phy_fixed[id] = NULL;
++ return;
++ }
++
++ phy_mode = of_get_phy_mode(np);
++ switch (phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ mask = 0;
++ break;
++ case PHY_INTERFACE_MODE_MII:
++ mask = 1;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ mask = 2;
++ break;
++ default:
++ dev_err(priv->device, "port %d - invalid phy mode\n", id);
++ return;
++ }
++
++ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
++ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
++ return;
++
++ val = rt_sysc_r32(SYSC_REG_CFG1);
++ val &= ~(3 << shift);
++ val |= mask << shift;
++ rt_sysc_w32(val, SYSC_REG_CFG1);
++
++ if (priv->phy->phy_fixed[id]) {
++ const __be32 *link = priv->phy->phy_fixed[id];
++ int tx_fc, rx_fc;
++ u32 val = 0;
++
++ priv->phy->speed[id] = be32_to_cpup(link++);
++ tx_fc = be32_to_cpup(link++);
++ rx_fc = be32_to_cpup(link++);
++ priv->phy->duplex[id] = be32_to_cpup(link++);
++ priv->link[id] = 1;
++
++ switch (priv->phy->speed[id]) {
++ case SPEED_10:
++ val = 0;
++ break;
++ case SPEED_100:
++ val = 1;
++ break;
++ case SPEED_1000:
++ val = 2;
++ break;
++ default:
++ dev_err(priv->device, "invalid link speed: %d\n",
++ priv->phy->speed[id]);
++ priv->phy->phy_fixed[id] = 0;
++ return;
++ }
++ val = PMCR_SPEED(val);
++ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
++ if (tx_fc)
++ val |= PMCR_TX_FC;
++ if (rx_fc)
++ val |= PMCR_RX_FC;
++ if (priv->phy->duplex[id])
++ val |= PMCR_DUPLEX;
++ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++ dev_info(priv->device, "using fixed link parameters\n");
++ return;
++ }
++
++ if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
++ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG;
++
++ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++ fe_connect_phy_node(priv, priv->phy->phy_node[id]);
++ gsw->autopoll |= BIT(id);
++ mt7620_auto_poll(gsw);
++ return;
++ }
++}
++
++static void mt7620_fe_reset(void)
++{
++ fe_reset(MT7620A_RESET_FE | MT7620A_RESET_ESW);
++}
++
++static void mt7620_rxcsum_config(bool enable)
++{
++ if (enable)
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
++ GDMA_TCS_EN | GDMA_UCS_EN),
++ MT7620A_GDMA1_FWD_CFG);
++ else
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~(GDMA_ICS_EN |
++ GDMA_TCS_EN | GDMA_UCS_EN),
++ MT7620A_GDMA1_FWD_CFG);
++}
++
++static void mt7620_txcsum_config(bool enable)
++{
++ if (enable)
++ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN |
++ CDMA_UCS_EN | CDMA_TCS_EN),
++ MT7620A_CDMA_CSG_CFG);
++ else
++ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) & ~(CDMA_ICS_EN |
++ CDMA_UCS_EN | CDMA_TCS_EN),
++ MT7620A_CDMA_CSG_CFG);
++}
++
++static int mt7620_fwd_config(struct fe_priv *priv)
++{
++ struct net_device *dev = priv_netdev(priv);
++
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
++
++ mt7620_txcsum_config((dev->features & NETIF_F_IP_CSUM));
++ mt7620_rxcsum_config((dev->features & NETIF_F_RXCSUM));
++
++ return 0;
++}
++
++static void mt7620_tx_dma(struct fe_tx_dma *txd)
++{
++}
++
++static void mt7620_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
++ FE_FLAG_RX_SG_DMA | FE_FLAG_HAS_SWITCH;
++
++ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
++ NETIF_F_HW_VLAN_CTAG_TX;
++ if (mt7620_get_eco() >= 5)
++ netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
++ NETIF_F_IPV6_CSUM;
++}
++
++static struct fe_soc_data mt7620_data = {
++ .init_data = mt7620_init_data,
++ .reset_fe = mt7620_fe_reset,
++ .set_mac = mt7620_set_mac,
++ .fwd_config = mt7620_fwd_config,
++ .tx_dma = mt7620_tx_dma,
++ .switch_init = mtk_gsw_init,
++ .port_init = mt7620_port_init,
++ .reg_table = mt7620_reg_table,
++ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
++ .rx_int = RT5350_RX_DONE_INT,
++ .tx_int = RT5350_TX_DONE_INT,
++ .status_int = MT7620_FE_GDM1_AF,
++ .checksum_bit = MT7620_L4_VALID,
++ .has_carrier = mt7620_has_carrier,
++ .mdio_read = mt7620_mdio_read,
++ .mdio_write = mt7620_mdio_write,
++ .mdio_adjust_link = mt7620_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "mediatek,mt7620-eth", .data = &mt7620_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch b/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch
new file mode 100644
index 0000000..81d4752
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch
@@ -0,0 +1,214 @@
+From 693f0ff3dbc53f910dff57ac15c324f7a94cc0ad Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 23:50:53 +0100
+Subject: [PATCH 509/513] net-next: mediatek: add support for mt7621
+
+Add support for SoCs from the mt7620 family. This include mt7620 and mt7621.
+These all have one dedicated external gbit port and a builtin 5 port 100mbit
+switch. Additionally one of the 5 switch ports can be changed to become an
+additional gbit port that we can attach a phy to. This patch includes
+rudimentary code to power up the switch. There are a lot of magic values
+that get written to the switch and the internal phys. These values come
+straight from the SDK driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/mediatek/soc_mt7621.c | 184 ++++++++++++++++++++++++++++
+ 1 file changed, 184 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/soc_mt7621.c
+
+diff --git a/drivers/net/ethernet/mediatek/soc_mt7621.c b/drivers/net/ethernet/mediatek/soc_mt7621.c
+new file mode 100644
+index 0000000..d6f7f23
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/soc_mt7621.c
+@@ -0,0 +1,184 @@
++/* This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/if_vlan.h>
++#include <linux/of_net.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "mtk_eth_soc.h"
++#include "gsw_mt7620.h"
++#include "mt7530.h"
++#include "mdio.h"
++
++#define MT7620A_CDMA_CSG_CFG 0x400
++#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
++#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
++#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
++#define MT7620A_RESET_FE BIT(21)
++#define MT7621_RESET_FE BIT(6)
++#define MT7620A_RESET_ESW BIT(23)
++#define MT7620_L4_VALID BIT(23)
++#define MT7621_L4_VALID BIT(24)
++
++#define MT7620_TX_DMA_UDF BIT(15)
++#define MT7621_TX_DMA_UDF BIT(19)
++#define TX_DMA_FP_BMAP ((0xff) << 19)
++
++#define CDMA_ICS_EN BIT(2)
++#define CDMA_UCS_EN BIT(1)
++#define CDMA_TCS_EN BIT(0)
++
++#define GDMA_ICS_EN BIT(22)
++#define GDMA_TCS_EN BIT(21)
++#define GDMA_UCS_EN BIT(20)
++
++/* frame engine counters */
++#define MT7620_REG_MIB_OFFSET 0x1000
++#define MT7620_PPE_AC_BCNT0 (MT7620_REG_MIB_OFFSET + 0x00)
++#define MT7620_GDM1_TX_GBCNT (MT7620_REG_MIB_OFFSET + 0x300)
++#define MT7620_GDM2_TX_GBCNT (MT7620_GDM1_TX_GBCNT + 0x40)
++
++#define MT7621_REG_MIB_OFFSET 0x2000
++#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
++#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
++#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
++
++#define GSW_REG_GDMA1_MAC_ADRL 0x508
++#define GSW_REG_GDMA1_MAC_ADRH 0x50C
++
++#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
++#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
++
++/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
++ * but after test it should be BIT(13).
++ */
++#define MT7620_FE_GDM1_AF BIT(13)
++#define MT7621_FE_GDM1_AF BIT(28)
++#define MT7621_FE_GDM2_AF BIT(29)
++
++static const u16 mt7621_reg_table[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++ [FE_REG_FE_DMA_VID_BASE] = 0,
++ [FE_REG_FE_COUNTER_BASE] = MT7621_GDM1_TX_GBCNT,
++ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
++ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
++};
++
++static int mt7621_gsw_config(struct fe_priv *priv)
++{
++ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f])
++ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
++
++ return 0;
++}
++
++static void mt7621_fe_reset(void)
++{
++ fe_reset(MT7621_RESET_FE);
++}
++
++static void mt7621_rxvlan_config(bool enable)
++{
++ if (enable)
++ fe_w32(1, MT7621_CDMP_EG_CTRL);
++ else
++ fe_w32(0, MT7621_CDMP_EG_CTRL);
++}
++
++static int mt7621_fwd_config(struct fe_priv *priv)
++{
++ struct net_device *dev = priv_netdev(priv);
++
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~0xffff,
++ MT7620A_GDMA1_FWD_CFG);
++
++ /* mt7621 don't have txcsum config */
++ mt7620_rxcsum_config((dev->features & NETIF_F_RXCSUM));
++ mt7621_rxvlan_config((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
++ (priv->flags & FE_FLAG_RX_VLAN_CTAG));
++
++ return 0;
++}
++
++static void mt7621_tx_dma(struct fe_tx_dma *txd)
++{
++ txd->txd4 = BIT(25);
++}
++
++static void mt7621_init_data(struct fe_soc_data *data,
++ struct net_device *netdev)
++{
++ struct fe_priv *priv = netdev_priv(netdev);
++
++ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
++ FE_FLAG_RX_SG_DMA | FE_FLAG_NAPI_WEIGHT |
++ FE_FLAG_HAS_SWITCH;
++
++ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
++ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_TSO |
++ NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
++}
++
++static void mt7621_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ fe_w32((mac[0] << 8) | mac[1], GSW_REG_GDMA1_MAC_ADRH);
++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ GSW_REG_GDMA1_MAC_ADRL);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static struct fe_soc_data mt7621_data = {
++ .init_data = mt7621_init_data,
++ .reset_fe = mt7621_fe_reset,
++ .set_mac = mt7621_set_mac,
++ .fwd_config = mt7621_fwd_config,
++ .tx_dma = mt7621_tx_dma,
++ .switch_init = mtk_gsw_init,
++ .switch_config = mt7621_gsw_config,
++ .reg_table = mt7621_reg_table,
++ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
++ .rx_int = RT5350_RX_DONE_INT,
++ .tx_int = RT5350_TX_DONE_INT,
++ .status_int = (MT7621_FE_GDM1_AF | MT7621_FE_GDM2_AF),
++ .checksum_bit = MT7621_L4_VALID,
++ .has_carrier = mt7620_has_carrier,
++ .mdio_read = mt7620_mdio_read,
++ .mdio_write = mt7620_mdio_write,
++ .mdio_adjust_link = mt7620_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch b/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch
new file mode 100644
index 0000000..ac07e8f
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch
@@ -0,0 +1,140 @@
+From b6f779ea9c329451b89404583b45b9eb00155b32 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 18 Nov 2015 03:58:26 +0100
+Subject: [PATCH 510/513] net-next: mediatek: add Kconfig and Makefile
+
+This patch adds the Makefile and Kconfig required to make the driver build.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Michael Lee <igvtee@gmail.com>
+---
+ drivers/net/ethernet/Kconfig | 1 +
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/mediatek/Kconfig | 62 ++++++++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/Makefile | 20 +++++++++++
+ 4 files changed, 84 insertions(+)
+ create mode 100644 drivers/net/ethernet/mediatek/Kconfig
+ create mode 100644 drivers/net/ethernet/mediatek/Makefile
+
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 955d06b..5302f81 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -105,6 +105,7 @@ config LANTIQ_ETOP
+ Support for the MII0 inside the Lantiq SoC
+
+ source "drivers/net/ethernet/marvell/Kconfig"
++source "drivers/net/ethernet/mediatek/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+ source "drivers/net/ethernet/micrel/Kconfig"
+ source "drivers/net/ethernet/microchip/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index 4a2ee98..ecc16c2 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
++obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+ obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
+diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
+new file mode 100644
+index 0000000..cf883c4
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/Kconfig
+@@ -0,0 +1,62 @@
++config NET_VENDOR_MEDIATEK
++ tristate "Mediatek/Ralink ethernet driver"
++ depends on RALINK
++ help
++ This driver supports the ethernet mac inside the Mediatek and Ralink WiSoCs
++
++config NET_MEDIATEK_SOC
++ def_tristate NET_VENDOR_MEDIATEK
++
++if NET_MEDIATEK_SOC
++choice
++ prompt "MAC type"
++
++config NET_MEDIATEK_RT2880
++ bool "RT2882"
++ depends on MIPS && SOC_RT288X
++
++config NET_MEDIATEK_RT3050
++ bool "RT3050/MT7628"
++ depends on MIPS && (SOC_RT305X || SOC_MT7620)
++
++config NET_MEDIATEK_RT3883
++ bool "RT3883"
++ depends on MIPS && SOC_RT3883
++
++config NET_MEDIATEK_MT7620
++ bool "MT7620"
++ depends on MIPS && SOC_MT7620
++
++config NET_MEDIATEK_MT7621
++ bool "MT7621"
++ depends on MIPS && SOC_MT7621
++
++endchoice
++
++config NET_MEDIATEK_MDIO
++ def_bool NET_MEDIATEK_SOC
++ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883 || NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
++ select PHYLIB
++
++config NET_MEDIATEK_MDIO_RT2880
++ def_bool NET_MEDIATEK_SOC
++ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883)
++ select NET_MEDIATEK_MDIO
++
++config NET_MEDIATEK_MDIO_MT7620
++ def_bool NET_MEDIATEK_SOC
++ depends on (NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
++ select NET_MEDIATEK_MDIO
++
++config NET_MEDIATEK_ESW_RT3050
++ def_tristate NET_MEDIATEK_SOC
++ depends on NET_MEDIATEK_RT3050
++
++config NET_MEDIATEK_GSW_MT7620
++ def_tristate NET_MEDIATEK_SOC
++ depends on NET_MEDIATEK_MT7620
++
++config NET_MEDIATEK_GSW_MT7621
++ def_tristate NET_MEDIATEK_SOC
++ depends on NET_MEDIATEK_MT7621
++endif
+diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
+new file mode 100644
+index 0000000..c4d2dfb
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/Makefile
+@@ -0,0 +1,20 @@
++#
++# Makefile for the Ralink SoCs built-in ethernet macs
++#
++
++mtk-eth-soc-y += mtk_eth_soc.o ethtool.o
++
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO) += mdio.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_RT2880) += mdio_rt2880.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_MT7620) += mdio_mt7620.o
++
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT2880) += soc_rt2880.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3050) += soc_rt3050.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3883) += soc_rt3883.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o
++mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
++
++obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
++obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o
++obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o
++obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch b/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
new file mode 100644
index 0000000..349662f
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
@@ -0,0 +1,93 @@
+From 6543b4cef96c12903f5ec5c015cd223a6b3c9a33 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 21:16:59 +0100
+Subject: [PATCH 511/513] net: mediatek: add support for the multiphy carrier
+ patch
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/gsw_mt7620.c | 1 +
+ drivers/net/ethernet/mediatek/gsw_mt7620.h | 1 +
+ drivers/net/ethernet/mediatek/gsw_mt7621.c | 1 +
+ drivers/net/ethernet/mediatek/mdio.c | 1 +
+ drivers/net/ethernet/mediatek/mdio_mt7620.c | 12 ++++++++++++
+ 5 files changed, 16 insertions(+)
+
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.c b/drivers/net/ethernet/mediatek/gsw_mt7620.c
+index a37ed1b..28122ac 100644
+--- a/drivers/net/ethernet/mediatek/gsw_mt7620.c
++++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c
+@@ -54,6 +54,7 @@ static irqreturn_t gsw_interrupt_mt7620(int irq, void *_priv)
+
+ priv->link[i] = link;
+ }
++ mt7620_handle_carrier(priv);
+ mtk_switch_w32(gsw, status, GSW_REG_ISR);
+
+ return IRQ_HANDLED;
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.h b/drivers/net/ethernet/mediatek/gsw_mt7620.h
+index 0d6ee84..dcef9a8 100644
+--- a/drivers/net/ethernet/mediatek/gsw_mt7620.h
++++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
+@@ -113,5 +113,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg);
+ u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
+ u32 phy_register, u32 write_data);
+ u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
++void mt7620_handle_carrier(struct fe_priv *priv);
+
+ #endif
+diff --git a/drivers/net/ethernet/mediatek/gsw_mt7621.c b/drivers/net/ethernet/mediatek/gsw_mt7621.c
+index 500841f..dc349ef 100644
+--- a/drivers/net/ethernet/mediatek/gsw_mt7621.c
++++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c
+@@ -60,6 +60,7 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
+ }
+ }
+
++ mt7620_handle_carrier(priv);
+ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
+
+ return IRQ_HANDLED;
+diff --git a/drivers/net/ethernet/mediatek/mdio.c b/drivers/net/ethernet/mediatek/mdio.c
+index 169c937..79a946e 100644
+--- a/drivers/net/ethernet/mediatek/mdio.c
++++ b/drivers/net/ethernet/mediatek/mdio.c
+@@ -89,6 +89,7 @@ int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ phydev->advertising = phydev->supported;
++ phydev->no_auto_carrier_off = 1;
+
+ dev_info(priv->device,
+ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
+diff --git a/drivers/net/ethernet/mediatek/mdio_mt7620.c b/drivers/net/ethernet/mediatek/mdio_mt7620.c
+index 89c6c30..db6db52 100644
+--- a/drivers/net/ethernet/mediatek/mdio_mt7620.c
++++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c
+@@ -137,6 +137,17 @@ int mt7620_has_carrier(struct fe_priv *priv)
+ }
+
+
++void mt7620_handle_carrier(struct fe_priv *priv)
++{
++ if (!priv->phy)
++ return;
++
++ if (mt7620_has_carrier(priv))
++ netif_carrier_on(priv->netdev);
++ else
++ netif_carrier_off(priv->netdev);
++}
++
+ void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
+ int speed, int duplex)
+ {
+@@ -153,4 +164,5 @@ void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
+ mt7620_print_link_state(priv, port, priv->link[port],
+ priv->phy->speed[port],
+ (priv->phy->duplex[port] == DUPLEX_FULL));
++ mt7620_handle_carrier(priv);
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch b/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch
new file mode 100644
index 0000000..2f1557e
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch
@@ -0,0 +1,906 @@
+From 4473f30809eed09037e1932a0c1805172cd997f7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 22:07:31 +0100
+Subject: [PATCH 512/513] net: mediatek: add swconfig driver for esw_rt3050
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/esw_rt3050.c | 805 ++++++++++++++++++++++++++++
+ 1 file changed, 805 insertions(+)
+
+diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c
+index 670ae16..352d50a 100644
+--- a/drivers/net/ethernet/mediatek/esw_rt3050.c
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
+@@ -17,6 +17,8 @@
+ #include <linux/platform_device.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+
++#include <linux/switch.h>
++
+ #include "mtk_eth_soc.h"
+
+ /* HW limitations for this switch:
+@@ -141,6 +143,8 @@
+ #define RT305X_ESW_PORT5 5
+ #define RT305X_ESW_PORT6 6
+
++#define RT305X_ESW_PORTS_NONE 0
++
+ #define RT305X_ESW_PMAP_LLLLLL 0x3f
+ #define RT305X_ESW_PMAP_LLLLWL 0x2f
+ #define RT305X_ESW_PMAP_WLLLLL 0x3e
+@@ -158,15 +162,51 @@
+ #define RT305X_ESW_PORTS_ALL \
+ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
+
++#define RT305X_ESW_NUM_VLANS 16
++#define RT305X_ESW_NUM_VIDS 4096
+ #define RT305X_ESW_NUM_PORTS 7
++#define RT305X_ESW_NUM_LANWAN 6
+ #define RT305X_ESW_NUM_LEDS 5
+
++#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x))
+ #define RT5350_EWS_REG_LED_POLARITY 0x168
+ #define RT5350_RESET_EPHY BIT(24)
+
++enum {
++ /* Global attributes. */
++ RT305X_ESW_ATTR_ENABLE_VLAN,
++ RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++ RT305X_ESW_ATTR_BC_STATUS,
++ RT305X_ESW_ATTR_LED_FREQ,
++ /* Port attributes. */
++ RT305X_ESW_ATTR_PORT_DISABLE,
++ RT305X_ESW_ATTR_PORT_DOUBLETAG,
++ RT305X_ESW_ATTR_PORT_UNTAG,
++ RT305X_ESW_ATTR_PORT_LED,
++ RT305X_ESW_ATTR_PORT_LAN,
++ RT305X_ESW_ATTR_PORT_RECV_BAD,
++ RT305X_ESW_ATTR_PORT_RECV_GOOD,
++ RT5350_ESW_ATTR_PORT_TR_BAD,
++ RT5350_ESW_ATTR_PORT_TR_GOOD,
++};
++
+ struct esw_port {
+ bool disable;
++ bool doubletag;
++ bool untag;
+ u8 led;
++ u16 pvid;
++};
++
++struct esw_vlan {
++ u8 ports;
++ u16 vid;
++};
++
++enum {
++ RT305X_ESW_VLAN_CONFIG_NONE = 0,
++ RT305X_ESW_VLAN_CONFIG_LLLLW,
++ RT305X_ESW_VLAN_CONFIG_WLLLL,
+ };
+
+ struct rt305x_esw {
+@@ -180,6 +220,12 @@ struct rt305x_esw {
+ unsigned char port_map;
+ unsigned int reg_led_polarity;
+
++ struct switch_dev swdev;
++ bool global_vlan_enable;
++ bool alt_vlan_disable;
++ int bc_storm_protect;
++ int led_frequency;
++ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
+ struct esw_port ports[RT305X_ESW_NUM_PORTS];
+
+ };
+@@ -252,6 +298,71 @@ out:
+ return ret;
+ }
+
++static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
++{
++ unsigned s;
++ unsigned val;
++
++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
++ val = (val >> s) & RT305X_ESW_VLANI_VID_M;
++
++ return val;
++}
++
++static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
++{
++ unsigned s;
++
++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++ esw_rmw(esw,
++ RT305X_ESW_REG_VLANI(vlan / 2),
++ RT305X_ESW_VLANI_VID_M << s,
++ (vid & RT305X_ESW_VLANI_VID_M) << s);
++}
++
++static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
++{
++ unsigned s, val;
++
++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
++ return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
++}
++
++static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
++{
++ unsigned s;
++
++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++ esw_rmw(esw,
++ RT305X_ESW_REG_PVIDC(port / 2),
++ RT305X_ESW_PVIDC_PVID_M << s,
++ (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
++}
++
++static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
++{
++ unsigned s, val;
++
++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
++ val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
++
++ return val;
++}
++
++static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
++{
++ unsigned s;
++
++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++ esw_rmw(esw,
++ RT305X_ESW_REG_VMSC(vlan / 4),
++ RT305X_ESW_VMSC_MSC_M << s,
++ (msc & RT305X_ESW_VMSC_MSC_M) << s);
++}
++
+ static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+ {
+ unsigned reg;
+@@ -261,6 +372,59 @@ static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+ RT305X_ESW_POC0_DIS_PORT_M;
+ }
+
++static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
++{
++ unsigned old_mask;
++ unsigned enable_mask;
++ unsigned changed;
++ int i;
++
++ old_mask = esw_get_port_disable(esw);
++ changed = old_mask ^ disable_mask;
++ enable_mask = old_mask & disable_mask;
++
++ /* enable before writing to MII */
++ esw_rmw(esw, RT305X_ESW_REG_POC0,
++ (RT305X_ESW_POC0_DIS_PORT_M <<
++ RT305X_ESW_POC0_DIS_PORT_S),
++ enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++
++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
++ if (!(changed & (1 << i)))
++ continue;
++ if (disable_mask & (1 << i)) {
++ /* disable */
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_PDOWN);
++ } else {
++ /* enable */
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_ANRESTART |
++ BMCR_SPEED100);
++ }
++ }
++
++ /* disable after writing to MII */
++ esw_rmw(esw, RT305X_ESW_REG_POC0,
++ (RT305X_ESW_POC0_DIS_PORT_M <<
++ RT305X_ESW_POC0_DIS_PORT_S),
++ disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++}
++
++static void esw_set_gsc(struct rt305x_esw *esw)
++{
++ esw_rmw(esw, RT305X_ESW_REG_SGC,
++ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
++ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
++ esw_rmw(esw, RT305X_ESW_REG_SGC,
++ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
++ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
++}
++
++static int esw_apply_config(struct switch_dev *dev);
++
+ static void esw_hw_init(struct rt305x_esw *esw)
+ {
+ int i;
+@@ -519,6 +683,9 @@ static void esw_hw_init(struct rt305x_esw *esw)
+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
+ esw->ports[i].led = 0x05;
+
++ /* Apply the empty config. */
++ esw_apply_config(&esw->swdev);
++
+ /* Only unmask the port change interrupt */
+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+ }
+@@ -541,11 +708,629 @@ static irqreturn_t esw_interrupt(int irq, void *_esw)
+ return IRQ_HANDLED;
+ }
+
++static int esw_apply_config(struct switch_dev *dev)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int i;
++ u8 disable = 0;
++ u8 doubletag = 0;
++ u8 en_vlan = 0;
++ u8 untag = 0;
++
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ u32 vid, vmsc;
++ if (esw->global_vlan_enable) {
++ vid = esw->vlans[i].vid;
++ vmsc = esw->vlans[i].ports;
++ } else {
++ vid = RT305X_ESW_VLAN_NONE;
++ vmsc = RT305X_ESW_PORTS_NONE;
++ }
++ esw_set_vlan_id(esw, i, vid);
++ esw_set_vmsc(esw, i, vmsc);
++ }
++
++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++ u32 pvid;
++ disable |= esw->ports[i].disable << i;
++ if (esw->global_vlan_enable) {
++ doubletag |= esw->ports[i].doubletag << i;
++ en_vlan |= 1 << i;
++ untag |= esw->ports[i].untag << i;
++ pvid = esw->ports[i].pvid;
++ } else {
++ int x = esw->alt_vlan_disable ? 0 : 1;
++ doubletag |= x << i;
++ en_vlan |= x << i;
++ untag |= x << i;
++ pvid = 0;
++ }
++ esw_set_pvid(esw, i, pvid);
++ if (i < RT305X_ESW_NUM_LEDS)
++ esw_w32(esw, esw->ports[i].led,
++ RT305X_ESW_REG_P0LED + 4*i);
++ }
++
++ esw_set_gsc(esw);
++ esw_set_port_disable(esw, disable);
++ esw_rmw(esw, RT305X_ESW_REG_SGC2,
++ (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
++ RT305X_ESW_SGC2_DOUBLE_TAG_S),
++ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
++ esw_rmw(esw, RT305X_ESW_REG_PFC1,
++ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
++ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
++ esw_rmw(esw, RT305X_ESW_REG_POC2,
++ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
++ untag << RT305X_ESW_POC2_UNTAG_EN_S);
++
++ if (!esw->global_vlan_enable) {
++ /*
++ * Still need to put all ports into vlan 0 or they'll be
++ * isolated.
++ * NOTE: vlan 0 is special, no vlan tag is prepended
++ */
++ esw_set_vlan_id(esw, 0, 0);
++ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
++ }
++
++ return 0;
++}
++
++static int esw_reset_switch(struct switch_dev *dev)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->global_vlan_enable = 0;
++ memset(esw->ports, 0, sizeof(esw->ports));
++ memset(esw->vlans, 0, sizeof(esw->vlans));
++ esw_hw_init(esw);
++
++ return 0;
++}
++
++static int esw_get_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->global_vlan_enable;
++
++ return 0;
++}
++
++static int esw_set_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->global_vlan_enable = val->value.i != 0;
++
++ return 0;
++}
++
++static int esw_get_alt_vlan_disable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->alt_vlan_disable;
++
++ return 0;
++}
++
++static int esw_set_alt_vlan_disable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->alt_vlan_disable = val->value.i != 0;
++
++ return 0;
++}
++
++static int
++rt305x_esw_set_bc_status(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
++
++ return 0;
++}
++
++static int
++rt305x_esw_get_bc_status(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->bc_storm_protect;
++
++ return 0;
++}
++
++static int
++rt305x_esw_set_led_freq(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
++
++ return 0;
++}
++
++static int
++rt305x_esw_get_led_freq(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->led_frequency;
++
++ return 0;
++}
++
++static int esw_get_port_link(struct switch_dev *dev,
++ int port,
++ struct switch_port_link *link)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ u32 speed, poa;
++
++ if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
++
++ link->link = (poa >> RT305X_ESW_LINK_S) & 1;
++ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
++ if (port < RT305X_ESW_NUM_LEDS) {
++ speed = (poa >> RT305X_ESW_SPD_S) & 1;
++ } else {
++ if (port == RT305X_ESW_NUM_PORTS - 1)
++ poa >>= 1;
++ speed = (poa >> RT305X_ESW_SPD_S) & 3;
++ }
++ switch (speed) {
++ case 0:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case 1:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case 2:
++ case 3: /* forced gige speed can be 2 or 3 */
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++
++ return 0;
++}
++
++static int esw_get_port_bool(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++ u32 x, reg, shift;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ switch (attr->id) {
++ case RT305X_ESW_ATTR_PORT_DISABLE:
++ reg = RT305X_ESW_REG_POC0;
++ shift = RT305X_ESW_POC0_DIS_PORT_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++ reg = RT305X_ESW_REG_SGC2;
++ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_UNTAG:
++ reg = RT305X_ESW_REG_POC2;
++ shift = RT305X_ESW_POC2_UNTAG_EN_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_LAN:
++ reg = RT305X_ESW_REG_SGC2;
++ shift = RT305X_ESW_SGC2_LAN_PMAP_S;
++ if (idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ x = esw_r32(esw, reg);
++ val->value.i = (x >> (idx + shift)) & 1;
++
++ return 0;
++}
++
++static int esw_set_port_bool(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++ val->value.i < 0 || val->value.i > 1)
++ return -EINVAL;
++
++ switch (attr->id) {
++ case RT305X_ESW_ATTR_PORT_DISABLE:
++ esw->ports[idx].disable = val->value.i;
++ break;
++ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++ esw->ports[idx].doubletag = val->value.i;
++ break;
++ case RT305X_ESW_ATTR_PORT_UNTAG:
++ esw->ports[idx].untag = val->value.i;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int esw_get_port_recv_badgood(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
++ u32 reg;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
++ val->value.i = (reg >> shift) & 0xffff;
++
++ return 0;
++}
++
++static int
++esw_get_port_tr_badgood(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ int idx = val->port_vlan;
++ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
++ u32 reg;
++
++ if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN) && (ralink_soc != MT762X_SOC_MT7688))
++ return -EINVAL;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++
++ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
++ val->value.i = (reg >> shift) & 0xffff;
++
++ return 0;
++}
++
++static int esw_get_port_led(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++ idx >= RT305X_ESW_NUM_LEDS)
++ return -EINVAL;
++
++ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
++
++ return 0;
++}
++
++static int esw_set_port_led(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
++ return -EINVAL;
++
++ esw->ports[idx].led = val->value.i;
++
++ return 0;
++}
++
++static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ if (port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ *val = esw_get_pvid(esw, port);
++
++ return 0;
++}
++
++static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ if (port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ esw->ports[port].pvid = val;
++
++ return 0;
++}
++
++static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ u32 vmsc, poc2;
++ int vlan_idx = -1;
++ int i;
++
++ val->len = 0;
++
++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
++ return -EINVAL;
++
++ /* valid vlan? */
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw_get_vlan_id(esw, i) == val->port_vlan &&
++ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
++ vlan_idx = i;
++ break;
++ }
++ }
++
++ if (vlan_idx == -1)
++ return -EINVAL;
++
++ vmsc = esw_get_vmsc(esw, vlan_idx);
++ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
++
++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++ struct switch_port *p;
++ int port_mask = 1 << i;
++
++ if (!(vmsc & port_mask))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
++ p->flags = 0;
++ else
++ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++ }
++
++ return 0;
++}
++
++static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int ports;
++ int vlan_idx = -1;
++ int i;
++
++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
++ val->len > RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ /* one of the already defined vlans? */
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw->vlans[i].vid == val->port_vlan &&
++ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
++ vlan_idx = i;
++ break;
++ }
++ }
++
++ /* select a free slot */
++ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
++ vlan_idx = i;
++ }
++
++ /* bail if all slots are in use */
++ if (vlan_idx == -1)
++ return -EINVAL;
++
++ ports = RT305X_ESW_PORTS_NONE;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++ int port_mask = 1 << p->id;
++ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++ if (p->id >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ ports |= port_mask;
++ esw->ports[p->id].untag = untagged;
++ }
++ esw->vlans[vlan_idx].ports = ports;
++ if (ports == RT305X_ESW_PORTS_NONE)
++ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
++ else
++ esw->vlans[vlan_idx].vid = val->port_vlan;
++
++ return 0;
++}
++
++static const struct switch_attr esw_global[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "VLAN mode (1:enabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_ENABLE_VLAN,
++ .get = esw_get_vlan_enable,
++ .set = esw_set_vlan_enable,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "alternate_vlan_disable",
++ .description = "Use en_vlan instead of doubletag to disable"
++ " VLAN mode",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++ .get = esw_get_alt_vlan_disable,
++ .set = esw_set_alt_vlan_disable,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "bc_storm_protect",
++ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
++ .max = 3,
++ .id = RT305X_ESW_ATTR_BC_STATUS,
++ .get = rt305x_esw_get_bc_status,
++ .set = rt305x_esw_set_bc_status,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "led_frequency",
++ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
++ .max = 3,
++ .id = RT305X_ESW_ATTR_LED_FREQ,
++ .get = rt305x_esw_get_led_freq,
++ .set = rt305x_esw_set_led_freq,
++ }
++};
++
++static const struct switch_attr esw_port[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "disable",
++ .description = "Port state (1:disabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_DISABLE,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "doubletag",
++ .description = "Double tagging for incoming vlan packets "
++ "(1:enabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "untag",
++ .description = "Untag (1:strip outgoing vlan tag)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_UNTAG,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "led",
++ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
++ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
++ " 8:100mact, 10:blink, 11:off, 12:on)",
++ .max = 15,
++ .id = RT305X_ESW_ATTR_PORT_LED,
++ .get = esw_get_port_led,
++ .set = esw_set_port_led,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "lan",
++ .description = "HW port group (0:wan, 1:lan)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_LAN,
++ .get = esw_get_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "recv_bad",
++ .description = "Receive bad packet counter",
++ .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
++ .get = esw_get_port_recv_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "recv_good",
++ .description = "Receive good packet counter",
++ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
++ .get = esw_get_port_recv_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "tr_bad",
++
++ .description = "Transmit bad packet counter. rt5350 only",
++ .id = RT5350_ESW_ATTR_PORT_TR_BAD,
++ .get = esw_get_port_tr_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "tr_good",
++
++ .description = "Transmit good packet counter. rt5350 only",
++ .id = RT5350_ESW_ATTR_PORT_TR_GOOD,
++ .get = esw_get_port_tr_badgood,
++ },
++};
++
++static const struct switch_attr esw_vlan[] = {
++};
++
++static const struct switch_dev_ops esw_ops = {
++ .attr_global = {
++ .attr = esw_global,
++ .n_attr = ARRAY_SIZE(esw_global),
++ },
++ .attr_port = {
++ .attr = esw_port,
++ .n_attr = ARRAY_SIZE(esw_port),
++ },
++ .attr_vlan = {
++ .attr = esw_vlan,
++ .n_attr = ARRAY_SIZE(esw_vlan),
++ },
++ .get_vlan_ports = esw_get_vlan_ports,
++ .set_vlan_ports = esw_set_vlan_ports,
++ .get_port_pvid = esw_get_port_pvid,
++ .set_port_pvid = esw_set_port_pvid,
++ .get_port_link = esw_get_port_link,
++ .apply_config = esw_apply_config,
++ .reset_switch = esw_reset_switch,
++};
++
+ static int esw_probe(struct platform_device *pdev)
+ {
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct device_node *np = pdev->dev.of_node;
+ const __be32 *port_map, *reg_init;
++ struct switch_dev *swdev;
+ struct rt305x_esw *esw;
+ struct resource *irq;
+ int ret;
+@@ -568,6 +1353,21 @@ static int esw_probe(struct platform_device *pdev)
+ if (reg_init)
+ esw->reg_led_polarity = be32_to_cpu(*reg_init);
+
++ swdev = &esw->swdev;
++ swdev->of_node = pdev->dev.of_node;
++ swdev->name = "rt305x-esw";
++ swdev->alias = "rt305x";
++ swdev->cpu_port = RT305X_ESW_PORT6;
++ swdev->ports = RT305X_ESW_NUM_PORTS;
++ swdev->vlans = RT305X_ESW_NUM_VIDS;
++ swdev->ops = &esw_ops;
++
++ ret = register_switch(swdev, NULL);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "register_switch failed\n");
++ goto unmap_base;
++ }
++
+ platform_set_drvdata(pdev, esw);
+
+ spin_lock_init(&esw->reg_rw_lock);
+@@ -583,6 +1383,11 @@ static int esw_probe(struct platform_device *pdev)
+ }
+
+ return ret;
++
++unmap_base:
++ iounmap(esw->base);
++ kfree(esw);
++ return ret;
+ }
+
+ static int esw_remove(struct platform_device *pdev)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch b/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
new file mode 100644
index 0000000..87ad128
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
@@ -0,0 +1,913 @@
+From cf5a08f1f16913da8bb24a96afaa2969b29d0827 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 14 Dec 2015 22:25:57 +0100
+Subject: [PATCH 513/513] net: mediatek: add swconfig driver for gsw_mt762x
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/Makefile | 4 +-
+ drivers/net/ethernet/mediatek/mt7530.c | 804 +++++++++++++++++++++++++++
+ drivers/net/ethernet/mediatek/mt7530.h | 20 +
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 +-
+ drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
+ drivers/net/ethernet/mediatek/soc_mt7620.c | 1 +
+ 6 files changed, 835 insertions(+), 4 deletions(-)
+ create mode 100644 drivers/net/ethernet/mediatek/mt7530.c
+ create mode 100644 drivers/net/ethernet/mediatek/mt7530.h
+
+diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
+index c4d2dfb..07ba4c2 100644
+--- a/drivers/net/ethernet/mediatek/Makefile
++++ b/drivers/net/ethernet/mediatek/Makefile
+@@ -15,6 +15,6 @@ mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o
+ mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
+
+ obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
+-obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o
+-obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o
++obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o mt7530.o
++obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o mt7530.o
+ obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
+diff --git a/drivers/net/ethernet/mediatek/mt7530.c b/drivers/net/ethernet/mediatek/mt7530.c
+new file mode 100644
+index 0000000..4d9980d
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mt7530.c
+@@ -0,0 +1,804 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/if.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/netlink.h>
++#include <linux/bitops.h>
++#include <net/genetlink.h>
++#include <linux/switch.h>
++#include <linux/delay.h>
++#include <linux/phy.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/lockdep.h>
++#include <linux/workqueue.h>
++#include <linux/of_device.h>
++
++#include "mt7530.h"
++
++#define MT7530_CPU_PORT 6
++#define MT7530_NUM_PORTS 8
++#define MT7530_NUM_VLANS 16
++#define MT7530_MAX_VID 4095
++#define MT7530_MIN_VID 0
++
++/* registers */
++#define REG_ESW_VLAN_VTCR 0x90
++#define REG_ESW_VLAN_VAWD1 0x94
++#define REG_ESW_VLAN_VAWD2 0x98
++#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
++
++#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
++#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
++#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
++
++/* vlan egress mode */
++enum {
++ ETAG_CTRL_UNTAG = 0,
++ ETAG_CTRL_TAG = 2,
++ ETAG_CTRL_SWAP = 1,
++ ETAG_CTRL_STACK = 3,
++};
++
++#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
++#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
++#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
++
++#define REG_HWTRAP 0x7804
++
++#define MIB_DESC(_s , _o, _n) \
++ { \
++ .size = (_s), \
++ .offset = (_o), \
++ .name = (_n), \
++ }
++
++struct mt7xxx_mib_desc {
++ unsigned int size;
++ unsigned int offset;
++ const char *name;
++};
++
++#define MT7621_MIB_COUNTER_BASE 0x4000
++#define MT7621_MIB_COUNTER_PORT_OFFSET 0x100
++#define MT7621_STATS_TDPC 0x00
++#define MT7621_STATS_TCRC 0x04
++#define MT7621_STATS_TUPC 0x08
++#define MT7621_STATS_TMPC 0x0C
++#define MT7621_STATS_TBPC 0x10
++#define MT7621_STATS_TCEC 0x14
++#define MT7621_STATS_TSCEC 0x18
++#define MT7621_STATS_TMCEC 0x1C
++#define MT7621_STATS_TDEC 0x20
++#define MT7621_STATS_TLCEC 0x24
++#define MT7621_STATS_TXCEC 0x28
++#define MT7621_STATS_TPPC 0x2C
++#define MT7621_STATS_TL64PC 0x30
++#define MT7621_STATS_TL65PC 0x34
++#define MT7621_STATS_TL128PC 0x38
++#define MT7621_STATS_TL256PC 0x3C
++#define MT7621_STATS_TL512PC 0x40
++#define MT7621_STATS_TL1024PC 0x44
++#define MT7621_STATS_TOC 0x48
++#define MT7621_STATS_RDPC 0x60
++#define MT7621_STATS_RFPC 0x64
++#define MT7621_STATS_RUPC 0x68
++#define MT7621_STATS_RMPC 0x6C
++#define MT7621_STATS_RBPC 0x70
++#define MT7621_STATS_RAEPC 0x74
++#define MT7621_STATS_RCEPC 0x78
++#define MT7621_STATS_RUSPC 0x7C
++#define MT7621_STATS_RFEPC 0x80
++#define MT7621_STATS_ROSPC 0x84
++#define MT7621_STATS_RJEPC 0x88
++#define MT7621_STATS_RPPC 0x8C
++#define MT7621_STATS_RL64PC 0x90
++#define MT7621_STATS_RL65PC 0x94
++#define MT7621_STATS_RL128PC 0x98
++#define MT7621_STATS_RL256PC 0x9C
++#define MT7621_STATS_RL512PC 0xA0
++#define MT7621_STATS_RL1024PC 0xA4
++#define MT7621_STATS_ROC 0xA8
++#define MT7621_STATS_RDPC_CTRL 0xB0
++#define MT7621_STATS_RDPC_ING 0xB4
++#define MT7621_STATS_RDPC_ARL 0xB8
++
++static const struct mt7xxx_mib_desc mt7621_mibs[] = {
++ MIB_DESC(1, MT7621_STATS_TDPC, "TxDrop"),
++ MIB_DESC(1, MT7621_STATS_TCRC, "TxCRC"),
++ MIB_DESC(1, MT7621_STATS_TUPC, "TxUni"),
++ MIB_DESC(1, MT7621_STATS_TMPC, "TxMulti"),
++ MIB_DESC(1, MT7621_STATS_TBPC, "TxBroad"),
++ MIB_DESC(1, MT7621_STATS_TCEC, "TxCollision"),
++ MIB_DESC(1, MT7621_STATS_TSCEC, "TxSingleCol"),
++ MIB_DESC(1, MT7621_STATS_TMCEC, "TxMultiCol"),
++ MIB_DESC(1, MT7621_STATS_TDEC, "TxDefer"),
++ MIB_DESC(1, MT7621_STATS_TLCEC, "TxLateCol"),
++ MIB_DESC(1, MT7621_STATS_TXCEC, "TxExcCol"),
++ MIB_DESC(1, MT7621_STATS_TPPC, "TxPause"),
++ MIB_DESC(1, MT7621_STATS_TL64PC, "Tx64Byte"),
++ MIB_DESC(1, MT7621_STATS_TL65PC, "Tx65Byte"),
++ MIB_DESC(1, MT7621_STATS_TL128PC, "Tx128Byte"),
++ MIB_DESC(1, MT7621_STATS_TL256PC, "Tx256Byte"),
++ MIB_DESC(1, MT7621_STATS_TL512PC, "Tx512Byte"),
++ MIB_DESC(1, MT7621_STATS_TL1024PC, "Tx1024Byte"),
++ MIB_DESC(2, MT7621_STATS_TOC, "TxByte"),
++ MIB_DESC(1, MT7621_STATS_RDPC, "RxDrop"),
++ MIB_DESC(1, MT7621_STATS_RFPC, "RxFiltered"),
++ MIB_DESC(1, MT7621_STATS_RUPC, "RxUni"),
++ MIB_DESC(1, MT7621_STATS_RMPC, "RxMulti"),
++ MIB_DESC(1, MT7621_STATS_RBPC, "RxBroad"),
++ MIB_DESC(1, MT7621_STATS_RAEPC, "RxAlignErr"),
++ MIB_DESC(1, MT7621_STATS_RCEPC, "RxCRC"),
++ MIB_DESC(1, MT7621_STATS_RUSPC, "RxUnderSize"),
++ MIB_DESC(1, MT7621_STATS_RFEPC, "RxFragment"),
++ MIB_DESC(1, MT7621_STATS_ROSPC, "RxOverSize"),
++ MIB_DESC(1, MT7621_STATS_RJEPC, "RxJabber"),
++ MIB_DESC(1, MT7621_STATS_RPPC, "RxPause"),
++ MIB_DESC(1, MT7621_STATS_RL64PC, "Rx64Byte"),
++ MIB_DESC(1, MT7621_STATS_RL65PC, "Rx65Byte"),
++ MIB_DESC(1, MT7621_STATS_RL128PC, "Rx128Byte"),
++ MIB_DESC(1, MT7621_STATS_RL256PC, "Rx256Byte"),
++ MIB_DESC(1, MT7621_STATS_RL512PC, "Rx512Byte"),
++ MIB_DESC(1, MT7621_STATS_RL1024PC, "Rx1024Byte"),
++ MIB_DESC(2, MT7621_STATS_ROC, "RxByte"),
++ MIB_DESC(1, MT7621_STATS_RDPC_CTRL, "RxCtrlDrop"),
++ MIB_DESC(1, MT7621_STATS_RDPC_ING, "RxIngDrop"),
++ MIB_DESC(1, MT7621_STATS_RDPC_ARL, "RxARLDrop")
++};
++
++enum {
++ /* Global attributes. */
++ MT7530_ATTR_ENABLE_VLAN,
++};
++
++struct mt7530_port_entry {
++ u16 pvid;
++};
++
++struct mt7530_vlan_entry {
++ u16 vid;
++ u8 member;
++ u8 etags;
++};
++
++struct mt7530_priv {
++ void __iomem *base;
++ struct mii_bus *bus;
++ struct switch_dev swdev;
++
++ bool global_vlan_enable;
++ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
++ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
++};
++
++struct mt7530_mapping {
++ char *name;
++ u16 pvids[MT7530_NUM_PORTS];
++ u8 members[MT7530_NUM_VLANS];
++ u8 etags[MT7530_NUM_VLANS];
++ u16 vids[MT7530_NUM_VLANS];
++} mt7530_defaults[] = {
++ {
++ .name = "llllw",
++ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
++ .members = { 0, 0x6f, 0x50 },
++ .etags = { 0, 0x40, 0x40 },
++ .vids = { 0, 1, 2 },
++ }, {
++ .name = "wllll",
++ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
++ .members = { 0, 0x7e, 0x41 },
++ .etags = { 0, 0x40, 0x40 },
++ .vids = { 0, 1, 2 },
++ },
++};
++
++struct mt7530_mapping*
++mt7530_find_mapping(struct device_node *np)
++{
++ const char *map;
++ int i;
++
++ if (of_property_read_string(np, "mediatek,portmap", &map))
++ return NULL;
++
++ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
++ if (!strcmp(map, mt7530_defaults[i].name))
++ return &mt7530_defaults[i];
++
++ return NULL;
++}
++
++static void
++mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
++{
++ int i = 0;
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530->port_entries[i].pvid = map->pvids[i];
++
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ mt7530->vlan_entries[i].member = map->members[i];
++ mt7530->vlan_entries[i].etags = map->etags[i];
++ mt7530->vlan_entries[i].vid = map->vids[i];
++ }
++}
++
++static int
++mt7530_reset_switch(struct switch_dev *dev)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int i;
++
++ memset(priv->port_entries, 0, sizeof(priv->port_entries));
++ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
++
++ /* set default vid of each vlan to the same number of vlan, so the vid
++ * won't need be set explicitly.
++ */
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ priv->vlan_entries[i].vid = i;
++ }
++
++ return 0;
++}
++
++static int
++mt7530_get_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ val->value.i = priv->global_vlan_enable;
++
++ return 0;
++}
++
++static int
++mt7530_set_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ priv->global_vlan_enable = val->value.i != 0;
++
++ return 0;
++}
++
++static u32
++mt7530_r32(struct mt7530_priv *priv, u32 reg)
++{
++ u32 val;
++ if (priv->bus) {
++ u16 high, low;
++
++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf);
++ high = mdiobus_read(priv->bus, 0x1f, 0x10);
++
++ return (high << 16) | (low & 0xffff);
++ }
++
++ val = ioread32(priv->base + reg);
++ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
++
++ return val;
++}
++
++static void
++mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val)
++{
++ if (priv->bus) {
++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
++ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16);
++ return;
++ }
++
++ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
++ iowrite32(val, priv->base + reg);
++}
++
++static void
++mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val)
++{
++ int i;
++
++ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
++
++ for (i = 0; i < 20; i++) {
++ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR);
++
++ if ((val & BIT(31)) == 0)
++ break;
++
++ udelay(1000);
++ }
++ if (i == 20)
++ printk("mt7530: vtcr timeout\n");
++}
++
++static int
++mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ if (port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port));
++ *val &= 0xfff;
++
++ return 0;
++}
++
++static int
++mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ if (port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
++ return -EINVAL;
++
++ priv->port_entries[port].pvid = pvid;
++
++ return 0;
++}
++
++static int
++mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 member;
++ u32 etags;
++ int i;
++
++ val->len = 0;
++
++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
++ return -EINVAL;
++
++ mt7530_vtcr(priv, 0, val->port_vlan);
++
++ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1);
++ member >>= 16;
++ member &= 0xff;
++
++ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ struct switch_port *p;
++ int etag;
++
++ if (!(member & BIT(i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++
++ etag = (etags >> (i * 2)) & 0x3;
++
++ if (etag == ETAG_CTRL_TAG)
++ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
++ else if (etag != ETAG_CTRL_UNTAG)
++ printk("vlan egress tag control neither untag nor tag.\n");
++ }
++
++ return 0;
++}
++
++static int
++mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u8 member = 0;
++ u8 etags = 0;
++ int i;
++
++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
++ val->len > MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->id >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ member |= BIT(p->id);
++
++ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
++ etags |= BIT(p->id);
++ }
++ priv->vlan_entries[val->port_vlan].member = member;
++ priv->vlan_entries[val->port_vlan].etags = etags;
++
++ return 0;
++}
++
++static int
++mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int vlan;
++ u16 vid;
++
++ vlan = val->port_vlan;
++ vid = (u16)val->value.i;
++
++ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
++ return -EINVAL;
++
++ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
++ return -EINVAL;
++
++ priv->vlan_entries[vlan].vid = vid;
++ return 0;
++}
++
++static int
++mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 vid;
++ int vlan;
++
++ vlan = val->port_vlan;
++
++ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan));
++ if (vlan & 1)
++ vid = vid >> 12;
++ vid &= 0xfff;
++
++ val->value.i = vid;
++ return 0;
++}
++
++static int
++mt7530_apply_config(struct switch_dev *dev)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int i, j;
++ u8 tag_ports;
++ u8 untag_ports;
++
++ if (!priv->global_vlan_enable) {
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0000);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x810000c0);
++
++ return 0;
++ }
++
++ /* set all ports as security mode */
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
++
++ /* check if a port is used in tag/untag vlan egress mode */
++ tag_ports = 0;
++ untag_ports = 0;
++
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ u8 member = priv->vlan_entries[i].member;
++ u8 etags = priv->vlan_entries[i].etags;
++
++ if (!member)
++ continue;
++
++ for (j = 0; j < MT7530_NUM_PORTS; j++) {
++ if (!(member & BIT(j)))
++ continue;
++
++ if (etags & BIT(j))
++ tag_ports |= 1u << j;
++ else
++ untag_ports |= 1u << j;
++ }
++ }
++
++ /* set all untag-only ports as transparent and the rest as user port */
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ u32 pvc_mode = 0x81000000;
++
++ if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
++ pvc_mode = 0x810000c0;
++
++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), pvc_mode);
++ }
++
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ u16 vid = priv->vlan_entries[i].vid;
++ u8 member = priv->vlan_entries[i].member;
++ u8 etags = priv->vlan_entries[i].etags;
++ u32 val;
++
++ /* vid of vlan */
++ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
++ if (i % 2 == 0) {
++ val &= 0xfff000;
++ val |= vid;
++ } else {
++ val &= 0xfff;
++ val |= (vid << 12);
++ }
++ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
++
++ /* vlan port membership */
++ if (member)
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
++ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
++ REG_ESW_VLAN_VAWD1_VALID);
++ else
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
++
++ /* egress mode */
++ val = 0;
++ for (j = 0; j < MT7530_NUM_PORTS; j++) {
++ if (etags & BIT(j))
++ val |= ETAG_CTRL_TAG << (j * 2);
++ else
++ val |= ETAG_CTRL_UNTAG << (j * 2);
++ }
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val);
++
++ /* write to vlan table */
++ mt7530_vtcr(priv, 1, i);
++ }
++
++ /* Port Default PVID */
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ u32 val;
++ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i));
++ val &= ~0xfff;
++ val |= priv->port_entries[i].pvid;
++ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val);
++ }
++
++ return 0;
++}
++
++static int
++mt7530_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 speed, pmsr;
++
++ if (port < 0 || port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port));
++
++ link->link = pmsr & 1;
++ link->duplex = (pmsr >> 1) & 1;
++ speed = (pmsr >> 2) & 3;
++
++ switch (speed) {
++ case 0:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case 1:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case 2:
++ case 3: /* forced gige speed can be 2 or 3 */
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++
++ return 0;
++}
++
++static const struct switch_attr mt7530_global[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "VLAN mode (1:enabled)",
++ .max = 1,
++ .id = MT7530_ATTR_ENABLE_VLAN,
++ .get = mt7530_get_vlan_enable,
++ .set = mt7530_set_vlan_enable,
++ },
++};
++
++static u64 get_mib_counter(struct mt7530_priv *priv, int i, int port)
++{
++ unsigned int port_base;
++ u64 t;
++
++ port_base = MT7621_MIB_COUNTER_BASE +
++ MT7621_MIB_COUNTER_PORT_OFFSET * port;
++
++ t = mt7530_r32(priv, port_base + mt7621_mibs[i].offset);
++ if (mt7621_mibs[i].size == 2) {
++ u64 hi;
++
++ hi = mt7530_r32(priv, port_base + mt7621_mibs[i].offset + 4);
++ t |= hi << 32;
++ }
++
++ return t;
++}
++
++static int mt7621_sw_get_port_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ static char buf[4096];
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int i, len = 0;
++
++ if (val->port_vlan >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ len += snprintf(buf + len, sizeof(buf) - len,
++ "Port %d MIB counters\n", val->port_vlan);
++
++ for (i = 0; i < sizeof(mt7621_mibs) / sizeof(*mt7621_mibs); ++i) {
++ u64 counter;
++ len += snprintf(buf + len, sizeof(buf) - len,
++ "%-11s: ", mt7621_mibs[i].name);
++ counter = get_mib_counter(priv, i, val->port_vlan);
++ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
++ counter);
++ }
++
++ val->value.s = buf;
++ val->len = len;
++ return 0;
++}
++
++static const struct switch_attr mt7621_port[] = {
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "mib",
++ .description = "Get MIB counters for port",
++ .get = mt7621_sw_get_port_mib,
++ .set = NULL,
++ },
++};
++
++static const struct switch_attr mt7530_port[] = {
++};
++
++static const struct switch_attr mt7530_vlan[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID (0-4094)",
++ .set = mt7530_set_vid,
++ .get = mt7530_get_vid,
++ .max = 4094,
++ },
++};
++
++static const struct switch_dev_ops mt7621_ops = {
++ .attr_global = {
++ .attr = mt7530_global,
++ .n_attr = ARRAY_SIZE(mt7530_global),
++ },
++ .attr_port = {
++ .attr = mt7621_port,
++ .n_attr = ARRAY_SIZE(mt7621_port),
++ },
++ .attr_vlan = {
++ .attr = mt7530_vlan,
++ .n_attr = ARRAY_SIZE(mt7530_vlan),
++ },
++ .get_vlan_ports = mt7530_get_vlan_ports,
++ .set_vlan_ports = mt7530_set_vlan_ports,
++ .get_port_pvid = mt7530_get_port_pvid,
++ .set_port_pvid = mt7530_set_port_pvid,
++ .get_port_link = mt7530_get_port_link,
++ .apply_config = mt7530_apply_config,
++ .reset_switch = mt7530_reset_switch,
++};
++
++static const struct switch_dev_ops mt7530_ops = {
++ .attr_global = {
++ .attr = mt7530_global,
++ .n_attr = ARRAY_SIZE(mt7530_global),
++ },
++ .attr_port = {
++ .attr = mt7530_port,
++ .n_attr = ARRAY_SIZE(mt7530_port),
++ },
++ .attr_vlan = {
++ .attr = mt7530_vlan,
++ .n_attr = ARRAY_SIZE(mt7530_vlan),
++ },
++ .get_vlan_ports = mt7530_get_vlan_ports,
++ .set_vlan_ports = mt7530_set_vlan_ports,
++ .get_port_pvid = mt7530_get_port_pvid,
++ .set_port_pvid = mt7530_set_port_pvid,
++ .get_port_link = mt7530_get_port_link,
++ .apply_config = mt7530_apply_config,
++ .reset_switch = mt7530_reset_switch,
++};
++
++int
++mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan)
++{
++ struct switch_dev *swdev;
++ struct mt7530_priv *mt7530;
++ struct mt7530_mapping *map;
++ int ret;
++
++ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
++ if (!mt7530)
++ return -ENOMEM;
++
++ mt7530->base = base;
++ mt7530->bus = bus;
++ mt7530->global_vlan_enable = vlan;
++
++ swdev = &mt7530->swdev;
++ if (bus) {
++ swdev->alias = "mt7530";
++ swdev->name = "mt7530";
++ } else if (IS_ENABLED(CONFIG_SOC_MT7621)) {
++ swdev->alias = "mt7621";
++ swdev->name = "mt7621";
++ } else {
++ swdev->alias = "mt7620";
++ swdev->name = "mt7620";
++ }
++ swdev->cpu_port = MT7530_CPU_PORT;
++ swdev->ports = MT7530_NUM_PORTS;
++ swdev->vlans = MT7530_NUM_VLANS;
++ if (IS_ENABLED(CONFIG_SOC_MT7621))
++ swdev->ops = &mt7621_ops;
++ else
++ swdev->ops = &mt7530_ops;
++
++ ret = register_switch(swdev, NULL);
++ if (ret) {
++ dev_err(dev, "failed to register mt7530\n");
++ return ret;
++ }
++
++
++ map = mt7530_find_mapping(dev->of_node);
++ if (map)
++ mt7530_apply_mapping(mt7530, map);
++ mt7530_apply_config(swdev);
++
++ /* magic vodoo */
++ if (!IS_ENABLED(CONFIG_SOC_MT7621) && bus && mt7530_r32(mt7530, REG_HWTRAP) != 0x1117edf) {
++ dev_info(dev, "fixing up MHWTRAP register - bootloader probably played with it\n");
++ mt7530_w32(mt7530, REG_HWTRAP, 0x1117edf);
++ }
++ dev_info(dev, "loaded %s driver\n", swdev->name);
++
++ return 0;
++}
+diff --git a/drivers/net/ethernet/mediatek/mt7530.h b/drivers/net/ethernet/mediatek/mt7530.h
+new file mode 100644
+index 0000000..1fc8c62
+--- /dev/null
++++ b/drivers/net/ethernet/mediatek/mt7530.h
+@@ -0,0 +1,20 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _MT7530_H__
++#define _MT7530_H__
++
++int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan);
++
++#endif
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+index dae7147..6299f87 100644
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -1308,8 +1308,13 @@ static int __init fe_init(struct net_device *dev)
+ }
+
+ err = fe_hw_init(dev);
+- if (!err)
+- return 0;
++ if (err)
++ goto err_phy_disconnect;
++
++ if ((priv->flags & FE_FLAG_HAS_SWITCH) && priv->soc->switch_config)
++ priv->soc->switch_config(priv);
++
++ return 0;
+
+ err_phy_disconnect:
+ if (priv->phy)
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+index ba5ba07..d5f8b87 100644
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+@@ -383,6 +383,7 @@ struct fe_soc_data {
+ int (*fwd_config)(struct fe_priv *priv);
+ void (*tx_dma)(struct fe_tx_dma *txd);
+ int (*switch_init)(struct fe_priv *priv);
++ int (*switch_config)(struct fe_priv *priv);
+ void (*port_init)(struct fe_priv *priv, struct device_node *port);
+ int (*has_carrier)(struct fe_priv *priv);
+ int (*mdio_init)(struct fe_priv *priv);
+diff --git a/drivers/net/ethernet/mediatek/soc_mt7620.c b/drivers/net/ethernet/mediatek/soc_mt7620.c
+index 9ad6bc9..740dd90 100644
+--- a/drivers/net/ethernet/mediatek/soc_mt7620.c
++++ b/drivers/net/ethernet/mediatek/soc_mt7620.c
+@@ -313,6 +313,7 @@ static struct fe_soc_data mt7620_data = {
+ .fwd_config = mt7620_fwd_config,
+ .tx_dma = mt7620_tx_dma,
+ .switch_init = mtk_gsw_init,
++ .switch_config = mt7620_gsw_config,
+ .port_init = mt7620_port_init,
+ .reg_table = mt7620_reg_table,
+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0600-net-mediatek-add-of_get_mac_address_mtd-support.patch b/target/linux/ramips/patches-4.3/0600-net-mediatek-add-of_get_mac_address_mtd-support.patch
new file mode 100644
index 0000000..38ef418
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0600-net-mediatek-add-of_get_mac_address_mtd-support.patch
@@ -0,0 +1,36 @@
+From fce0d89383e0a2a694723989da608df1a464bae4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 13 Dec 2015 17:45:19 +0100
+Subject: [PATCH 1/2] net: mediatek: add of_get_mac_address_mtd() support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+index fb435fa..9999768 100644
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -1273,7 +1273,6 @@ static int __init fe_init(struct net_device *dev)
+ {
+ struct fe_priv *priv = netdev_priv(dev);
+ struct device_node *port;
+- const char *mac_addr;
+ int err;
+
+ priv->soc->reset_fe();
+@@ -1281,9 +1280,7 @@ static int __init fe_init(struct net_device *dev)
+ if (priv->soc->switch_init)
+ priv->soc->switch_init(priv);
+
+- mac_addr = of_get_mac_address(priv->device->of_node);
+- if (mac_addr)
+- ether_addr_copy(dev->dev_addr, mac_addr);
++ of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr);
+
+ /*If the mac address is invalid, use random mac address */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch b/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch
new file mode 100644
index 0000000..0628364
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch
@@ -0,0 +1,27 @@
+From 3c550ae0359be5bc4d5daa86a62f711a91ac8dde Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 13 Dec 2015 17:46:09 +0100
+Subject: [PATCH 2/2] net:mediatke: add phy_ethtool_ioctl() support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+index 9999768..84b1a43 100644
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -1342,6 +1342,9 @@ static int fe_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+ return -ENODEV;
+
+ switch (cmd) {
++ case SIOCETHTOOL:
++ return phy_ethtool_ioctl(priv->phy_dev,
++ (void *) ifr->ifr_data);
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+--
+1.7.10.4
+