Add preliminary RouterBoard RB1xx support

SVN-Revision: 6839

9 files changed, 1002 insertions, 0 deletions

diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
new file mode 100644
index 0000000..a68b4a1
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y  := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
new file mode 100644
index 0000000..18e2674
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
@@ -0,0 +1,186 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_switch.h>
+#include <myloader.h>
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+struct adm5120_info adm5120_info = {
+	.cpu_speed		= CPU_SPEED_175,
+	.cpu_package		= CPU_PACKAGE_PQFP,
+	.boot_loader		= BOOT_LOADER_UNKNOWN,
+	.board_type		= BOARD_TYPE_UNKNOWN
+};
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+	[BOOT_LOADER_UNKNOWN]	= "Unknown",
+	[BOOT_LOADER_CFE]	= "CFE",
+	[BOOT_LOADER_UBOOT]	= "U-Boot",
+	[BOOT_LOADER_MYLOADER]	= "MyLoader"
+};
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c)		((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c)		(((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c)		(((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c)	(((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c)		(((c) & CODE_NAB) != 0)
+
+static void __init detect_cpu_info(void)
+{
+	uint32_t *reg;
+	uint32_t code;
+	uint32_t clks;
+
+	reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE);
+	code = *reg;
+
+	clks = CODE_GET_CLKS(code);
+
+	adm5120_info.product_code = CODE_GET_PC(code);
+	adm5120_info.revision = CODE_GET_REV(code);
+
+	adm5120_info.cpu_speed = CPU_SPEED_175;
+	if (clks & 1)
+		adm5120_info.cpu_speed += 25000000;
+	if (clks & 2)
+		adm5120_info.cpu_speed += 50000000;
+
+	adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+		CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP;
+
+	adm5120_info.nand_boot = CODE_GET_NAB(code);
+
+}
+
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+	/*
+	 * This method only works, when we are booted directly from the CFE.
+	 */
+	uint32_t cfe_handle = (uint32_t) fw_arg0;
+	uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+	uint32_t cfe_entry = (uint32_t) fw_arg2;
+	uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+	/* Check for CFE by finding the CFE magic number */
+	if (cfe_seal != CFE_EPTSEAL) {
+		/* We are not booted from CFE */
+		return 0;
+	}
+
+	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+	if (cfe_a1_val != 0) {
+		return 0;
+	}
+
+	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+		return 0;
+	}
+
+	return 1;
+}
+
+static int __init detect_uboot(void)
+{
+	/* FIXME: not yet implemented */
+	return 0;
+}
+
+static int __init detect_myloader(void)
+{
+	struct mylo_system_params *sysp;
+	struct mylo_board_params *boardp;
+	struct mylo_partition_table *parts;
+
+	sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS);
+	boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS);
+	parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS);
+
+	/* Check for some magic numbers */
+	if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) ||
+	   (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) ||
+	   (parts->magic != MYLO_MAGIC_PARTITIONS))
+		return 0;
+
+	return 1;
+}
+
+static int __init detect_routerboot(void)
+{
+	/* FIXME: not yet implemented */
+	return 0;
+}
+
+static int __init detect_bootloader(void)
+{
+	if (detect_cfe())
+		return BOOT_LOADER_CFE;
+
+	if (detect_uboot())
+		return BOOT_LOADER_UBOOT;
+
+	if (detect_myloader())
+		return BOOT_LOADER_MYLOADER;
+
+	if (detect_routerboot())
+		return BOOT_LOADER_ROUTERBOOT;
+
+	return BOOT_LOADER_UNKNOWN;
+}
+
+/*
+ * Board detection
+ */
+static void __init detect_board_type(void)
+{
+	/* FIXME: not yet implemented */
+}
+
+void __init adm5120_info_show(void)
+{
+	printk("ADM%04X%s revision %d, running at %ldMHz\n",
+		adm5120_info.product_code,
+		(adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P",
+		adm5120_info.revision,
+		(adm5120_info.cpu_speed / 1000000)
+		);
+	printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]);
+	printk("Booted from   : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR");
+}
+
+void __init adm5120_info_init(void)
+{
+	detect_cpu_info();
+	adm5120_info.boot_loader = detect_bootloader();
+	detect_board_type();
+
+	adm5120_info_show();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
new file mode 100644
index 0000000..46f3bb0
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
@@ -0,0 +1,156 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *		Creator : daniell@admtek.com.tw
+ *	Carsten Langgaard, carstenl@mips.com
+ *	Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ *	Copyright (C) 2001 Ralf Baechle
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq_cpu.h>
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern irq_desc_t irq_desc[];
+extern asmlinkage void mipsIRQ(void);
+
+int mips_int_lock(void);
+void mips_int_unlock(int);
+
+unsigned int mips_counter_frequency;
+
+#define ADM5120_INTC_REG(reg)	(*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
+#define ADM5120_INTC_STATUS	ADM5120_INTC_REG(0x00)
+#define ADM5120_INTC_ENABLE	ADM5120_INTC_REG(0x08)
+#define ADM5120_INTC_DISABLE	ADM5120_INTC_REG(0x0c)
+#define ADM5120_IRQ_MAX		9
+#define ADM5120_IRQ_MASK	0x3ff
+
+void adm5120_hw0_irqdispatch(struct pt_regs *regs)
+{
+	unsigned long intsrc;
+	int i;
+
+	intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
+
+	for (i = 0; intsrc; intsrc >>= 1, i++)
+		if (intsrc & 0x1)
+			do_IRQ(i);
+		else
+			spurious_interrupt();
+}
+
+void mips_timer_interrupt(struct pt_regs *regs)
+{
+        write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+        ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
+}
+
+/* Main interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+        unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+        if (cp0_cause & CAUSEF_IP7) {
+                mips_timer_interrupt( regs);
+        } else if (cp0_cause & CAUSEF_IP2) {
+                adm5120_hw0_irqdispatch( regs);
+        }
+}
+
+void enable_adm5120_irq(unsigned int irq)
+{
+	int s;
+
+	/* Disable all interrupts (FIQ/IRQ) */
+	s = mips_int_lock();
+
+	if ((irq < 0) || (irq > ADM5120_IRQ_MAX)) 
+		goto err_exit;
+
+	ADM5120_INTC_ENABLE = (1<<irq);
+
+err_exit:
+
+	/* Restore the interrupts states */
+	mips_int_unlock(s);
+}
+
+
+void disable_adm5120_irq(unsigned int irq)
+{
+	int s;
+
+	/* Disable all interrupts (FIQ/IRQ) */
+	s = mips_int_lock();
+
+	if ((irq < 0) || (irq > ADM5120_IRQ_MAX)) 
+		goto err_exit;
+
+	ADM5120_INTC_DISABLE = (1<<irq);
+
+err_exit:
+	/* Restore the interrupts states */
+	mips_int_unlock(s);
+}
+
+unsigned int startup_adm5120_irq(unsigned int irq)
+{
+	enable_adm5120_irq(irq);
+	return 0;
+}
+
+void shutdown_adm5120_irq(unsigned int irq)
+{
+	disable_adm5120_irq(irq);
+}
+
+static inline void ack_adm5120_irq(unsigned int irq_nr)
+{
+	ADM5120_INTC_DISABLE = (1 << irq_nr);
+}
+
+
+static void end_adm5120_irq(unsigned int irq_nr)
+{
+	ADM5120_INTC_ENABLE = (1 << irq_nr);
+}
+
+static hw_irq_controller adm5120_irq_type = {
+	.typename 	= "MIPS",
+	.startup	= startup_adm5120_irq,
+	.shutdown	= shutdown_adm5120_irq,
+	.enable		= enable_adm5120_irq,
+	.disable	= disable_adm5120_irq,
+	.ack 		= ack_adm5120_irq,
+	.end		= end_adm5120_irq,
+	.set_affinity	= NULL,
+};
+
+
+void __init arch_init_irq(void)
+{
+	int i;
+	
+	for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &adm5120_irq_type;
+	}
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
new file mode 100644
index 0000000..e5c7f0c
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
@@ -0,0 +1,135 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ *	daniell@admtek.com.tw
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *****************************************************************************/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm-mips/mips-boards/prom.h>
+
+extern char *prom_getenv(char *envname);
+
+#define PFN_ALIGN(x)    (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+#define ADM5120_MEMCTRL			0x1200001c
+#define ADM5120_MEMCTRL_SDRAM_MASK	0x7
+
+static const unsigned long adm_sdramsize[] __initdata = {
+	0x0,		/* Reserved */
+	0x0400000,	/* 4Mb */
+	0x0800000,	/* 8Mb */
+	0x1000000,	/* 16Mb */
+	0x4000000,	/* 64Mb */
+	0x8000000,	/* 128Mb */
+};
+
+/* determined physical memory size, not overridden by command line args  */
+unsigned long physical_memsize = 0L;
+
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+	char *memsize_str;
+	unsigned int memsize;
+	char cmdline[CL_SIZE], *ptr;
+
+	memsize_str = prom_getenv("memsize");
+
+	if (!memsize_str)
+	{
+		prom_printf("memsize not set in boot prom, set to default (8Mb)\n");
+		physical_memsize = 0x00800000;
+	}
+	else
+#ifdef DEBUG
+		prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+		physical_memsize = simple_strtol(memsize_str, NULL, 0);
+
+	/* Check the command line for a memsize directive that overrides
+	 * the physical/default amount */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+	ptr = strstr(ptr, " memsize=");
+
+	if (ptr)
+		memsize = memparse(ptr + 8, &ptr);
+	else
+		memsize = physical_memsize;
+
+       memset(mdesc, 0, sizeof(mdesc));
+
+       mdesc[0].type = BOOT_MEM_RAM;
+       mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
+       mdesc[0].size = memsize - mdesc[0].base;
+
+       return &mdesc[0];
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+	p = prom_getmdesc();
+
+	while (p->size)
+	{
+		long type;
+		unsigned long base, size;
+		base = p->base;
+		type = p->type,
+		size = p->size;
+		add_memory_region(base, size, type);
+		p++;
+	}
+}
+
+#if 0
+void __init prom_meminit(void)
+{
+	unsigned long base = CPHYSADDR(PFN_ALIGN(&_end));
+	unsigned long size;
+
+	u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
+	size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
+	add_memory_region(base, size-base, BOOT_MEM_RAM);
+}
+#endif
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	/* We do not have to prom memory to free */
+        return 0;
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
new file mode 100644
index 0000000..f118fb4
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
@@ -0,0 +1,135 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#define STATUS_IE	0x00000001
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ *       wired to UART1.
+ *	
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+
+NESTED(mipsIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		
+	mfc0	s1, CP0_STATUS
+	and     s0, s0, s1
+	
+	/* First we check for r4k counter/timer IRQ. */
+	andi	a0, s0, CAUSEF_IP7
+	beq		a0, zero, 1f
+	nop
+
+	move	a0, sp
+	jal		mips_timer_interrupt
+	nop
+
+	j		ret_from_irq
+	nop				
+
+1:
+	andi	a0, s0, CAUSEF_IP2
+	beq		a0, zero, 1f	
+	nop
+	
+	move	a0, sp			
+	jal		adm5120_hw0_irqdispatch	 
+	nop
+1:
+	j		ret_from_irq
+	nop							
+
+END(mipsIRQ)
+
+
+LEAF(mips_int_lock)
+	.set noreorder
+	mfc0	v0, CP0_STATUS
+	li		v1, ~STATUS_IE
+	and		v1, v1, v0
+	mtc0	v1, CP0_STATUS
+	j		ra
+	and		v0, v0, STATUS_IE
+	.set reorder
+END(mips_int_lock)
+
+
+LEAF(mips_int_unlock)
+	mfc0	v0, CP0_STATUS
+	and		a0, a0, STATUS_IE
+	or		v0, v0, a0
+	mtc0	v0, CP0_STATUS
+	j		ra
+	nop
+END(mips_int_unlock)
+
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
new file mode 100644
index 0000000..e644fc3
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
@@ -0,0 +1,118 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ *	daniell@admtek.com.tw
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+
+void setup_prom_printf(int);
+void prom_printf(char *, ...);
+void prom_meminit(void);
+
+#define ADM5120_ENVC           1
+
+char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"};
+
+#define READCSR(r)      *(volatile unsigned long *)(0xB2600000+(r))
+#define WRITECSR(r,v)   *(volatile unsigned long *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG         0x00
+#define UART_FR_REG         0x18
+#define UART_TX_FIFO_FULL   0x20
+
+int putPromChar(char c)
+{
+	WRITECSR(UART_DR_REG, c);
+        while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+        return 0;
+}
+
+/*
+ * Ugly prom_printf used for debugging
+ */
+
+void prom_printf(char *fmt, ...)
+{
+        va_list args;
+        int l;
+        char *p, *buf_end;
+        char buf[1024];
+
+        va_start(args, fmt);
+        l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+        va_end(args);
+
+        buf_end = buf + l;
+
+        for (p = buf; p < buf_end; p++) {
+                /* Crude cr/nl handling is better than none */
+                if (*p == '\n')
+                        putPromChar('\r');
+                putPromChar(*p);
+        }
+}
+
+char *prom_getenv(char *envname)
+{
+	int i, index=0;
+
+	i = strlen(envname);
+
+	printk(KERN_INFO "GETENV: envname is %s\n", envname);
+
+	while(index < (2*ADM5120_ENVC)) {
+		if(strncmp(envname, adm5120_envp[index], i) == 0) {
+			printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]);
+			return(adm5120_envp[index+1]);
+		}
+		index += 2;
+	}
+
+	printk(KERN_INFO "GETENV: not found.\n");
+	return(NULL);
+}
+
+	
+/*
+ * initialize the prom module.
+ */
+void __init prom_init(void)
+{
+	/* you should these macros defined in include/asm/bootinfo.h */
+	mips_machgroup = MACH_GROUP_ADM_GW;
+	mips_machtype = MACH_ADM_GW_5120;
+	
+	adm5120_info_init();
+
+	/* init command line, register a default kernel command line */
+	strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+
+	/* init memory map */
+	prom_meminit();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
new file mode 100644
index 0000000..1b99d77
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
@@ -0,0 +1,106 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *		Creator : daniell@admtek.com.tw
+ *	Copyright 1999, 2000 MIPS Technologies, Inc.
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <adm5120_info.h>
+
+#define ADM5120_SOFTRESET	0x12000004
+#define STATUS_IE		0x00000001
+#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
+
+void  mips_time_init(void);
+
+extern unsigned int mips_counter_frequency;
+
+void adm5120_restart(char *command)
+{
+	*(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+
+void adm5120_halt(void)
+{
+        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+        while (1);
+}
+
+
+void adm5120_power_off(void)
+{
+        adm5120_halt();
+}
+
+void __init adm5120_time_init(void)
+{
+	mips_counter_frequency = adm5120_info.cpu_speed >> 1;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	/* to generate the first timer interrupt */
+	write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+	clear_c0_status(ST0_BEV);
+	set_c0_status(ALLINTS);
+}
+
+void __init plat_mem_setup(void)
+{
+	printk(KERN_INFO "ADM5120 board setup\n");
+
+	board_time_init = adm5120_time_init;
+	//board_timer_setup = mips_timer_setup;
+
+	_machine_restart = adm5120_restart;
+	_machine_halt = adm5120_halt;
+	pm_power_off = adm5120_power_off;
+
+	set_io_port_base(KSEG1);
+}
+
+const char *get_system_type(void)
+{
+	return "ADM5120 Board";
+}
+
+static struct resource adm5120_hcd_resources[] = {
+	[0] = {
+		.start	= 0x11200000,
+		.end	= 0x11200084,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x3,
+		.end	= 0x3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device adm5120hcd_device = {
+	.name		= "adm5120-hcd",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(adm5120_hcd_resources),
+	.resource	= adm5120_hcd_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&adm5120hcd_device,
+};
+
+static int __init adm5120_init(void)
+{
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+subsys_initcall(adm5120_init);
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
new file mode 100644
index 0000000..91dae89
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
@@ -0,0 +1,63 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *	Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *	Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_defs.h>
+
+volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
+volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
+
+#define PCI_ENABLE 0x80000000
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *val)
+{
+	*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+	    ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+	switch (size) {
+		case 1:
+			*val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
+			break;
+		case 2:
+			*val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
+			break;
+		default:
+			*val = (*pci_config_data_reg);
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+                            int size, uint32_t val)
+{
+	*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+	    ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+	switch (size) {
+		case 1:
+			*(volatile u8 *)(((int)pci_config_data_reg) +
+			    (where & 3)) = val;
+			break;
+		case 2:
+			*(volatile u16 *)(((int)pci_config_data_reg) +
+			    (where & 2)) = (val);
+			break;
+		default:
+			*pci_config_data_reg = (val);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+	.read	= pci_config_read,
+	.write	= pci_config_write,
+};
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
new file mode 100644
index 0000000..78de001
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
@@ -0,0 +1,96 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *	Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *	Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+
+extern struct pci_ops adm5120_pci_ops;
+
+#define PCI_CMM_IOACC_EN	0x1
+#define PCI_CMM_MEMACC_EN	0x2
+#define PCI_CMM_MASTER_EN	0x4
+#define PCI_CMM_DEF \
+		(PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
+
+#define PCI_DEF_CACHE_LINE_SZ	4
+
+
+struct resource pci_io_resource = {
+	.name = "ADM5120 PCI I/O",
+	.start = ADM5120_PCIIO_BASE,
+	.end = ADM5120_PCICFG_ADDR-1,
+	.flags = IORESOURCE_IO
+};
+
+struct resource pci_mem_resource = {
+	.name = "ADM5120 PCI MEM",
+	.start = ADM5120_PCIMEM_BASE,
+	.end = ADM5120_PCIIO_BASE-1,
+	.flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+	.pci_ops	= &adm5120_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot < 2 || slot > 4)
+		return -1;
+	return slot + 4;
+}
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+	if (dev->devfn == 0) {
+		pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+		    PCI_DEF_CACHE_LINE_SZ);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
+
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static int __init adm5120_pci_setup(void)
+{
+	int pci_bios;
+
+	pci_bios = adm5120_has_pci();
+
+	printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
+	if (pci_bios == 0)
+		return 1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00000000;
+	PCIBIOS_MIN_MEM = 0x00000000;
+
+	/* Set I/O resource limits.  */
+	ioport_resource.end = 0x1fffffff;
+	iomem_resource.end = 0xffffffff;
+
+	register_pci_controller(&adm5120_controller);
+	return 0;
+}
+
+subsys_initcall(adm5120_pci_setup);