Upgrade rb532 to .23, provide generic GPIO API to this board

SVN-Revision: 10171

5 files changed, 121 insertions, 115 deletions

diff --git a/target/linux/rb532/patches/100-rb5xx_support.patch b/target/linux/rb532/patches/100-rb5xx_support.patch
index 5715023..3bb6aaa 100644
--- a/target/linux/rb532/patches/100-rb5xx_support.patch
+++ b/target/linux/rb532/patches/100-rb5xx_support.patch
@@ -1,9 +1,9 @@
-diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/arch/mips/Kconfig	2006-12-14 04:09:50.000000000 +0100
-@@ -780,6 +780,19 @@
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select TOSHIBA_BOARDS
+diff -urN linux-2.6.23.12/arch/mips/Kconfig linux-2.6.23.12.new/arch/mips/Kconfig
+--- linux-2.6.23.12/arch/mips/Kconfig	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/arch/mips/Kconfig	2008-01-11 08:46:20.000000000 +0100
+@@ -595,6 +595,20 @@
+ 	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ 	  board, which is based on GT64120 bridge chip.
  
 +config MIKROTIK_RB500
 +	bool "Support for RB5xx boards"
@@ -14,83 +14,84 @@ diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
 +	select SYS_SUPPORTS_32BIT_KERNEL
 +	select SWAP_IO_SPACE
 +	select DMA_NONCOHERENT
++	select GENERIC_GPIO
 +	help
-+	  Support the Mikrotik(tm) Routerboard 500 series,
-+	  such as the RB532.
++	 Support the Mikrotik(tm) Routerboard 500 series,
++	 such as the RB532.
 +
- config TOSHIBA_RBTX4927
- 	bool "Toshiba TBTX49[23]7 board"
- 	select DMA_NONCOHERENT
-@@ -1106,7 +1119,7 @@
+ endchoice
  
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || SNI_RM
-+	default "4" if MACH_DECSTATION || SNI_RM || MIKROTIK_RB500
- 	default "7" if SGI_IP27
+ source "arch/mips/au1000/Kconfig"
+@@ -829,6 +843,7 @@
+ 	default "4" if MACH_DECSTATION
+ 	default "7" if SGI_IP27 || SNI_RM
+ 	default "4" if PMC_MSP4200_EVAL
++	default "4" if MIKROTIK_RB500
  	default "5"
  
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile	2006-12-14 03:13:55.000000000 +0100
-+++ linux.dev/arch/mips/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -586,6 +586,13 @@
- load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
+ config HAVE_STD_PC_SERIAL_PORT
+diff -urN linux-2.6.23.12/arch/mips/Makefile linux-2.6.23.12.new/arch/mips/Makefile
+--- linux-2.6.23.12/arch/mips/Makefile	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/arch/mips/Makefile	2008-01-11 08:47:04.000000000 +0100
+@@ -300,6 +300,13 @@
+ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
  
  #
 +# Routerboard 532 board
 +#
 +core-$(CONFIG_MIKROTIK_RB500)	+= arch/mips/rb500/
-+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
++cflags-$(CONFIG_MIKROTIK_RB500)	+= -Iinclude/asm-mips/rc32434
 +load-$(CONFIG_MIKROTIK_RB500)	+= 0xffffffff80101000
 +
 +#
- # Toshiba RBTX4927 board or
- # Toshiba RBTX4937 board
+ # For all MIPS, Inc. eval boards
  #
-diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
---- linux.old/arch/mips/pci/Makefile	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/arch/mips/pci/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -53,3 +53,4 @@
+ core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
+diff -urN linux-2.6.23.12/arch/mips/pci/Makefile linux-2.6.23.12.new/arch/mips/pci/Makefile
+--- linux-2.6.23.12/arch/mips/pci/Makefile	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/arch/mips/pci/Makefile	2008-01-11 08:47:30.000000000 +0100
+@@ -46,3 +46,4 @@
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_MIKROTIK_RB500)	+= pci-rc32434.o ops-rc32434.o fixup-rb500.o
-diff -urN linux.old/drivers/pci/Makefile linux.dev/drivers/pci/Makefile
---- linux.old/drivers/pci/Makefile	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/pci/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -16,6 +16,7 @@
- 
- # Build the PCI MSI interrupt support
- obj-$(CONFIG_PCI_MSI) += msi.o
+diff -urN linux-2.6.23.12/drivers/pci/Makefile linux-2.6.23.12.new/drivers/pci/Makefile
+--- linux-2.6.23.12/drivers/pci/Makefile	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/pci/Makefile	2008-01-11 08:48:10.000000000 +0100
+@@ -32,6 +32,7 @@
+ obj-$(CONFIG_PPC64) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
 +obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
  
- # Build the Hypertransport interrupt support
- obj-$(CONFIG_HT_IRQ) += htirq.o
-diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/include/asm-mips/bootinfo.h	2006-12-14 04:09:50.000000000 +0100
-@@ -212,6 +212,10 @@
- #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
- #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
+ #
+ # ACPI Related PCI FW Functions
+diff -urN linux-2.6.23.12/include/asm-mips/bootinfo.h linux-2.6.23.12.new/include/asm-mips/bootinfo.h
+--- linux-2.6.23.12/include/asm-mips/bootinfo.h	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/include/asm-mips/bootinfo.h	2008-01-11 08:48:48.000000000 +0100
+@@ -208,6 +208,11 @@
+ #define MACH_GROUP_WINDRIVER   28	/* Windriver boards */
+ #define MACH_WRPPMC             1
  
-+#define MACH_GROUP_MIKROTIK    26 /* Mikrotik Boards			    */
++
++#define MACH_GROUP_MIKROTIK	29 	/* Mikrotik Boards                       */
 +#define  MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 */
 +#define  MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A */
 +
  #define CL_SIZE			COMMAND_LINE_SIZE
  
  const char *get_system_type(void);
-diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/include/asm-mips/cpu.h	2006-12-14 04:09:50.000000000 +0100
-@@ -200,7 +200,8 @@
- #define CPU_SB1A		62
- #define CPU_74K			63
+diff -urN linux-2.6.23.12/include/asm-mips/cpu.h linux-2.6.23.12.new/include/asm-mips/cpu.h
+--- linux-2.6.23.12/include/asm-mips/cpu.h	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/include/asm-mips/cpu.h	2008-01-11 08:49:34.000000000 +0100
+@@ -217,8 +217,9 @@
  #define CPU_R14000		64
--#define CPU_LAST		64
-+#define CPU_RC32300		65
-+#define CPU_LAST		65
+ #define CPU_LOONGSON1           65
+ #define CPU_LOONGSON2           66
++#define CPU_RC32300            	67
+ 
+-#define CPU_LAST		66
++#define CPU_LAST		67
  
  /*
   * ISA Level encodings
-
diff --git a/target/linux/rb532/patches/120-cf.patch b/target/linux/rb532/patches/120-cf.patch
index 19395ef..a02ebf7 100644
--- a/target/linux/rb532/patches/120-cf.patch
+++ b/target/linux/rb532/patches/120-cf.patch
@@ -1,26 +1,29 @@
-diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
---- linux.old/drivers/block/Kconfig	2006-10-26 02:43:39.000000000 +0200
-+++ linux.dev/drivers/block/Kconfig	2006-10-26 00:11:14.000000000 +0200
-@@ -456,4 +456,12 @@
- 	This driver provides Support for ATA over Ethernet block
- 	devices like the Coraid EtherDrive (R) Storage Blade.
+diff -urN linux-2.6.23.12/drivers/block/Kconfig linux-2.6.23.12.new/drivers/block/Kconfig
+--- linux-2.6.23.12/drivers/block/Kconfig	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/block/Kconfig	2008-01-11 08:53:32.000000000 +0100
+@@ -426,6 +426,14 @@
+ 	  Support for virtual disk devices as a client under Sun
+ 	  Logical Domains.
  
 +config BLK_DEV_CF_MIPS
 +	bool "CF slot of RB532 board"
 +	depends on MIKROTIK_RB500
 +	default y
 +	help
-+	  The Routerboard 532 has a CF slot on it. Enable the special block
-+	  device driver for it.
++	 The Routerboard 532 has a CF slot on it. Enable the special block
++	 device driver for it.
 +
- endmenu
-diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
---- linux.old/drivers/block/Makefile	2006-06-18 03:49:35.000000000 +0200
-+++ linux.dev/drivers/block/Makefile	2006-10-26 02:44:10.000000000 +0200
-@@ -29,4 +29,5 @@
- obj-$(CONFIG_VIODASD)		+= viodasd.o
- obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
- obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
+ source "drivers/s390/block/Kconfig"
+ 
+ config XILINX_SYSACE
+diff -urN linux-2.6.23.12/drivers/block/Makefile linux-2.6.23.12.new/drivers/block/Makefile
+--- linux-2.6.23.12/drivers/block/Makefile	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/block/Makefile	2008-01-11 08:54:04.000000000 +0100
+@@ -21,6 +21,7 @@
+ obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
+ obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
+ obj-$(CONFIG_SUNVDC)		+= sunvdc.o
 +obj-$(CONFIG_BLK_DEV_CF_MIPS)	+= rb500/
  
-
+ obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
+ obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
diff --git a/target/linux/rb532/patches/140-cmdline_hack.patch b/target/linux/rb532/patches/140-cmdline_hack.patch
index 4425af7..f97f96e 100644
--- a/target/linux/rb532/patches/140-cmdline_hack.patch
+++ b/target/linux/rb532/patches/140-cmdline_hack.patch
@@ -1,14 +1,14 @@
-Index: linux-2.6.21.1/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/kernel/head.S	2007-06-07 01:26:11.862575128 +0200
-+++ linux-2.6.21.1/arch/mips/kernel/head.S	2007-06-07 01:31:06.499783464 +0200
-@@ -133,6 +133,9 @@
+diff -urN linux-2.6.23.12/arch/mips/kernel/head.S linux-2.6.23.12.new/arch/mips/kernel/head.S
+--- linux-2.6.23.12/arch/mips/kernel/head.S	2008-01-11 11:27:08.000000000 +0100
++++ linux-2.6.23.12.new/arch/mips/kernel/head.S	2008-01-11 11:27:35.000000000 +0100
+@@ -132,6 +132,10 @@
+ 
  	j kernel_entry
  	nop
- 
++
 +EXPORT(_image_cmdline)
-+ 	.ascii "CMDLINE:"
++       .ascii "CMDLINE:"
 +
+ #ifndef CONFIG_NO_EXCEPT_FILL
  	/*
  	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
diff --git a/target/linux/rb532/patches/240-via_rhine_performance.patch b/target/linux/rb532/patches/240-via_rhine_performance.patch
index e7cdf8a..90d3657 100644
--- a/target/linux/rb532/patches/240-via_rhine_performance.patch
+++ b/target/linux/rb532/patches/240-via_rhine_performance.patch
@@ -1,27 +1,31 @@
-diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
---- linux.old/drivers/net/via-rhine.c	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/net/via-rhine.c	2006-12-14 03:39:01.000000000 +0100
-@@ -33,6 +33,7 @@
+--- linux-2.6.23.12/drivers/net/via-rhine.c	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/net/via-rhine.c	2008-01-11 08:58:58.000000000 +0100
+@@ -33,6 +33,8 @@
  #define DRV_VERSION	"1.4.3"
  #define DRV_RELDATE	"2007-03-06"
  
 +#define PKT_ALIGN 1
++
  
  /* A few user-configurable values.
     These may be modified when a driver module is loaded. */
-@@ -40,9 +41,11 @@
+@@ -40,6 +42,7 @@
  static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
  static int max_interrupt_work = 20;
  
 +#ifndef PKT_ALIGN
  /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
     Setting to > 1518 effectively disables this feature. */
+ #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
+@@ -49,6 +52,7 @@
+ #else
  static int rx_copybreak;
-+#endif
+ #endif
++#endif /* PKT_ALIGN */
  
  /* Work-around for broken BIOSes: they are unable to get the chip back out of
     power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-@@ -105,6 +108,7 @@
+@@ -111,6 +115,7 @@
  #include <asm/io.h>
  #include <asm/irq.h>
  #include <asm/uaccess.h>
@@ -29,7 +33,7 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
  #include <linux/dmi.h>
  
  /* These identify the driver base version and may not be removed. */
-@@ -124,12 +128,14 @@
+@@ -130,12 +135,14 @@
  
  module_param(max_interrupt_work, int, 0);
  module_param(debug, int, 0);
@@ -46,7 +50,7 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
  
  /*
  		Theory of Operation
-@@ -924,7 +930,7 @@
+@@ -927,7 +934,7 @@
  
  	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
  	for (i = 0; i < RX_RING_SIZE; i++) {
@@ -55,17 +59,18 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
  		rp->rx_skbuff[i] = skb;
  		if (skb == NULL)
  			break;
-@@ -1482,6 +1488,9 @@
+@@ -1484,7 +1491,9 @@
+ 			struct sk_buff *skb;
  			/* Length should omit the CRC */
  			int pkt_len = data_size - 4;
- 
+-
 +#ifdef PKT_ALIGN
 +			int i;
 +#else
  			/* Check if the packet is long enough to accept without
  			   copying to a minimally-sized skbuff. */
  			if (pkt_len < rx_copybreak &&
-@@ -1501,7 +1510,9 @@
+@@ -1503,7 +1512,9 @@
  							       rp->rx_skbuff_dma[entry],
  							       rp->rx_buf_sz,
  							       PCI_DMA_FROMDEVICE);
@@ -76,19 +81,18 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
  				skb = rp->rx_skbuff[entry];
  				if (skb == NULL) {
  					printk(KERN_ERR "%s: Inconsistent Rx "
-@@ -1515,6 +1526,14 @@
+@@ -1517,6 +1528,14 @@
  						 rp->rx_skbuff_dma[entry],
  						 rp->rx_buf_sz,
  						 PCI_DMA_FROMDEVICE);
-+#ifdef PKT_ALIGN		
++#ifdef PKT_ALIGN
 +				/* align the data to the ip header - should be faster than copying the entire packet */
 +				for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
 +					put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
 +				}
 +				skb->data += 2;
 +				skb->tail += 2;
-+#endif	
++#endif
  			}
  			skb->protocol = eth_type_trans(skb, dev);
  #ifdef CONFIG_VIA_RHINE_NAPI
-
diff --git a/target/linux/rb532/patches/510-rb500_led.patch b/target/linux/rb532/patches/510-rb500_led.patch
index 172682d..a218f91 100644
--- a/target/linux/rb532/patches/510-rb500_led.patch
+++ b/target/linux/rb532/patches/510-rb500_led.patch
@@ -1,22 +1,9 @@
-Index: linux-2.6.21.1/drivers/leds/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Makefile    2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.21.1/drivers/leds/Makefile       2007-07-19 16:43:07.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_RB500)                += leds-rb500.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-Index: linux-2.6.21.1/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Kconfig     2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.21.1/drivers/leds/Kconfig 2007-07-19 16:42:55.000000000 +0200
-@@ -95,6 +95,12 @@
- 	help
- 	  This option enables support for the front LED on Cobalt Server
+diff -urN linux-2.6.23.12/drivers/leds/Kconfig linux-2.6.23.12.new/drivers/leds/Kconfig
+--- linux-2.6.23.12/drivers/leds/Kconfig	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/leds/Kconfig	2008-01-11 09:01:19.000000000 +0100
+@@ -101,6 +101,12 @@
+ 	  outputs. To be useful the particular board must have LEDs
+ 	  and they must be connected to the GPIO lines.
  
 +config LEDS_RB500
 +	tristate "LED Support for RB5xx boards"
@@ -27,3 +14,14 @@ Index: linux-2.6.21.1/drivers/leds/Kconfig
  comment "LED Triggers"
  
  config LEDS_TRIGGERS
+diff -urN linux-2.6.23.12/drivers/leds/Makefile linux-2.6.23.12.new/drivers/leds/Makefile
+--- linux-2.6.23.12/drivers/leds/Makefile	2007-12-18 22:55:57.000000000 +0100
++++ linux-2.6.23.12.new/drivers/leds/Makefile	2008-01-11 09:00:49.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
+ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
++obj-$(CONFIG_LEDS_RB500)		+= leds-rb500.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o