bump to 2.6.30-rc6

SVN-Revision: 15918

136 files changed, 48167 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c
new file mode 100644
index 0000000..02cdd22
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c
@@ -0,0 +1,253 @@
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <linux/gta02-shadow.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+	struct regulator *regulator;
+	struct rfkill *rfkill;
+	int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	int ret = 0;
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+			ret = 1;
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+			ret = 1;
+	}
+
+	if (!ret) {
+		return strlcpy(buf, "0\n", 3);
+	} else {
+		return strlcpy(buf, "1\n", 3);
+	}
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+	bt_data = dev_get_drvdata(dev);
+
+	gta02_gpb_setpin(GTA02_GPIO_BT_EN, !on);
+
+	if (on) {
+		if (!regulator_is_enabled(bt_data->regulator))
+			regulator_enable(bt_data->regulator);
+	} else {
+		if (regulator_is_enabled(bt_data->regulator))
+			regulator_disable(bt_data->regulator);
+	}
+
+	gta02_gpb_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
+{
+	struct device *dev = data;
+	unsigned long on = (state == RFKILL_STATE_ON);
+
+	__gta02_pm_bt_toggle_radio(dev, on);
+
+	return 0;
+}
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		enum rfkill_state state = on ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
+		bt_rfkill_toggle_radio(dev, state);
+		bt_data->rfkill->state = state;
+
+		__gta02_pm_bt_toggle_radio(dev, on);
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		/* reset is low-active, so we need to invert */
+		gta02_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+	dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+	bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+	__gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+	return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+	__gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+	return 0;
+}
+#else
+#define gta02_bt_suspend	NULL
+#define gta02_bt_resume		NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+	struct rfkill *rfkill;
+	struct regulator *regulator;
+	struct gta02_pm_bt_data *bt_data;
+	int ret;
+
+	dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+	bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+	dev_set_drvdata(&pdev->dev, bt_data);
+
+	regulator = regulator_get(&pdev->dev, "BT_3V2");
+	if (IS_ERR(regulator))
+		return -ENODEV;
+
+	bt_data->regulator = regulator;
+
+	/* this tests the true physical state of the regulator... */
+	if (regulator_is_enabled(regulator)) {
+		/*
+		 * but these only operate on the logical state of the
+		 * regulator... so we need to logicaly "adopt" it on
+		 * to turn it off
+		 */
+		regulator_enable(regulator);
+		regulator_disable(regulator);
+	}
+
+	/* we pull reset to low to make sure that the chip doesn't
+	 * drain power through the reset line */
+	gta02_gpb_setpin(GTA02_GPIO_BT_EN, 0);
+
+	rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_BLUETOOTH);
+
+	rfkill->name = pdev->name;
+	rfkill->data = &pdev->dev;
+	rfkill->state = RFKILL_STATE_OFF;
+	rfkill->toggle_radio = bt_rfkill_toggle_radio;
+
+	ret = rfkill_register(rfkill);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register rfkill\n");
+		return ret;
+	}
+
+	bt_data->rfkill = rfkill;
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	struct regulator *regulator;
+
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+
+	if (bt_data->rfkill) {
+		rfkill_unregister(bt_data->rfkill);
+		rfkill_free(bt_data->rfkill);
+	}
+
+	if (!bt_data || !bt_data->regulator)
+		return 0;
+
+	regulator = bt_data->regulator;
+
+	/* Make sure regulator is disabled before calling regulator_put */
+	if (regulator_is_enabled(regulator))
+		regulator_disable(regulator);
+
+	regulator_put(regulator);
+
+	kfree(bt_data);
+
+	return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+	.probe		= gta02_bt_probe,
+	.remove		= gta02_bt_remove,
+	.suspend	= gta02_bt_suspend,
+	.resume		= gta02_bt_resume,
+	.driver		= {
+		.name		= "gta02-pm-bt",
+	},
+};
+
+static int __devinit gta02_bt_init(void)
+{
+	return platform_driver_register(&gta02_bt_driver);
+}
+
+static void gta02_bt_exit(void)
+{
+	platform_driver_unregister(&gta02_bt_driver);
+}
+
+module_init(gta02_bt_init);
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c
new file mode 100644
index 0000000..9325123
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c
@@ -0,0 +1,244 @@
+/*
+ * GPS Power Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007-2009 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpu.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/gta02-shadow.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+struct gta02_pm_gps_data {
+#ifdef CONFIG_PM
+	int keep_on_in_suspend;
+#endif
+	int power_was_on;
+	struct regulator *regulator;
+};
+
+static struct gta02_pm_gps_data gta02_gps;
+
+int gta02_pm_gps_is_on(void)
+{
+	return gta02_gps.power_was_on;
+}
+EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+
+/* This is the POWERON pin */
+static void gps_pwron_set(int on)
+{
+	if (on) {
+		/* return UART pins to being UART pins */
+		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
+		/* remove pulldown now it won't be floating any more */
+		s3c2410_gpio_pullup(S3C2410_GPH5, 0);
+
+		if (!gta02_gps.power_was_on)
+			regulator_enable(gta02_gps.regulator);
+	} else {
+		/*
+		 * take care not to power unpowered GPS from UART TX
+		 * return them to GPIO and force low
+		 */
+		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
+		s3c2410_gpio_setpin(S3C2410_GPH4, 0);
+		/* don't let RX from unpowered GPS float */
+		s3c2410_gpio_pullup(S3C2410_GPH5, 1);
+		if (gta02_gps.power_was_on)
+			regulator_disable(gta02_gps.regulator);
+	}
+}
+
+static int gps_pwron_get(void)
+{
+	return regulator_is_enabled(gta02_gps.regulator);
+}
+
+#ifdef CONFIG_PM
+/* This is the flag for keeping gps ON during suspend */
+static void gps_keep_on_in_suspend_set(int on)
+{
+	gta02_gps.keep_on_in_suspend = on;
+}
+
+static int gps_keep_on_in_suspend_get(void)
+{
+	return gta02_gps.keep_on_in_suspend;
+}
+#endif
+
+static ssize_t power_gps_read(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	int ret = 0;
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		ret = gps_pwron_get();
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		ret = gps_keep_on_in_suspend_get();
+#endif
+	}
+	if (ret)
+		return strlcpy(buf, "1\n", 3);
+	else
+		return strlcpy(buf, "0\n", 3);
+}
+
+static ssize_t power_gps_write(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		gps_pwron_set(on);
+		gta02_gps.power_was_on = !!on;
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		gps_keep_on_in_suspend_set(on);
+#endif
+	}
+	return count;
+}
+
+#ifdef CONFIG_PM
+static int gta02_pm_gps_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	if (!gta02_gps.keep_on_in_suspend ||
+		!gta02_gps.power_was_on)
+		gps_pwron_set(0);
+	else
+		dev_warn(&pdev->dev, "GTA02: keeping gps ON "
+			 "during suspend\n");
+	return 0;
+}
+
+static int gta02_pm_gps_resume(struct platform_device *pdev)
+{
+	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+		gps_pwron_set(1);
+
+	return 0;
+}
+
+static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
+#else
+#define gta02_pm_gps_suspend	NULL
+#define gta02_pm_gps_resume	NULL
+#endif
+
+static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
+
+static struct attribute *gta02_gps_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+#ifdef CONFIG_PM
+	&dev_attr_keep_on_in_suspend.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group gta02_gps_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gps_sysfs_entries,
+};
+
+static int __init gta02_pm_gps_probe(struct platform_device *pdev)
+{
+	gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
+	if (IS_ERR(gta02_gps.regulator)) {
+		dev_err(&pdev->dev, "probe failed %ld\n",
+			PTR_ERR(gta02_gps.regulator));
+
+		return PTR_ERR(gta02_gps.regulator);
+	}
+
+	dev_info(&pdev->dev, "starting\n");
+
+	/*
+	 * Here we should call the code that handles the set GPS power
+	 * off action.  But, the regulator API does not allow us to
+	 * reassert regulator state, and when we read the regulator API
+	 * logical state, it can differ from the actual state,  So
+	 * a workaround for this is to just set the regulator off in the
+	 * PMU directly.  Because that's different from normal flow, we
+	 * have to reproduce other things from the OFF action here too.
+	 */
+
+	/*
+	 * u-boot enables LDO5 (GPS), which doesn't make sense and
+	 * causes confusion. We therefore disable the regulator here.
+	 */
+	pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
+
+	/*
+	 * take care not to power unpowered GPS from UART TX
+	 * return them to GPIO and force low
+	 */
+	s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPH4, 0);
+	/* don't let RX from unpowered GPS float */
+	s3c2410_gpio_pullup(S3C2410_GPH5, 1);
+
+	return sysfs_create_group(&pdev->dev.kobj,
+				  &gta02_gps_attr_group);
+}
+
+static int gta02_pm_gps_remove(struct platform_device *pdev)
+{
+	regulator_put(gta02_gps.regulator);
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
+	return 0;
+}
+
+static struct platform_driver gta02_pm_gps_driver = {
+	.probe		= gta02_pm_gps_probe,
+	.remove		= gta02_pm_gps_remove,
+	.suspend	= gta02_pm_gps_suspend,
+	.resume		= gta02_pm_gps_resume,
+	.driver		= {
+		.name		= "gta02-pm-gps",
+	},
+};
+
+static int __devinit gta02_pm_gps_init(void)
+{
+	return platform_driver_register(&gta02_pm_gps_driver);
+}
+
+static void gta02_pm_gps_exit(void)
+{
+	platform_driver_unregister(&gta02_pm_gps_driver);
+}
+
+module_init(gta02_pm_gps_init);
+module_exit(gta02_pm_gps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c
new file mode 100644
index 0000000..2f1da04
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c
@@ -0,0 +1,275 @@
+/*
+ * GSM Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gta02-shadow.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/cpu.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+int gta_gsm_interrupts;
+EXPORT_SYMBOL(gta_gsm_interrupts);
+
+struct gta02pm_priv {
+	int gpio_ndl_gsm;
+};
+
+static struct gta02pm_priv gta02_gsm;
+
+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "download")) {
+		if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT)
+			goto out_1;
+	}
+
+	return strlcpy(buf, "0\n", 3);
+out_1:
+	return strlcpy(buf, "1\n", 3);
+}
+
+static void gsm_on_off(struct device *dev, int on)
+{
+	if (!on) {
+		/*
+		 * Do not drive into powered-down GSM side
+		 * GTA02 only, because on GTA01 maybe serial
+		 * is used otherwise.
+		 */
+		s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPIO_INPUT);
+
+		pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
+
+		return;
+	}
+
+	/* allow UART to talk to GSM side now we will power it */
+	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
+	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
+
+	pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
+
+	msleep(100);
+
+	/*
+	 * workaround for calypso firmware moko10 and earlier,
+	 * without this it will leave IRQ line high after
+	 * booting
+	 */
+	s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+	msleep(1000);
+	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
+
+}
+
+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		gsm_on_off(dev, on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "download")) {
+		/*
+		 * the keyboard / buttons driver requests and enables
+		 * the JACK_INSERT IRQ.  We have to take care about
+		 * not enabling and disabling the IRQ when it was
+		 * already in that state or we get "unblanaced IRQ"
+		 * kernel warnings and stack dumps.  So we use the
+		 * copy of the ndl_gsm state to figure out if we should
+		 * enable or disable the jack interrupt
+		 */
+		if (on) {
+			if (gta02_gsm.gpio_ndl_gsm)
+				disable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		} else {
+			if (!gta02_gsm.gpio_ndl_gsm)
+				enable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		}
+
+		gta02_gsm.gpio_ndl_gsm = !on;
+		s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (on) {
+			gta_gsm_interrupts = 0;
+			s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+			s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+		} else
+			s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
+
+#ifdef CONFIG_PM
+
+static int gta02_gsm_resume(struct platform_device *pdev);
+static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	/* If flowcontrol asserted, abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			goto busy;
+	}
+
+	/* disable DL GSM to prevent jack_insert becoming 'floating' */
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+	return 0;
+
+busy:
+	return -EBUSY;
+}
+
+static int
+gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
+{
+	/* Last chance: abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			return -EBUSY;
+	}
+	return 0;
+}
+
+static int gta02_gsm_resume(struct platform_device *pdev)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
+
+	return 0;
+}
+#else
+#define gta02_gsm_suspend	NULL
+#define gta02_gsm_suspend_late	NULL
+#define gta02_gsm_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct attribute *gta02_gsm_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_download.attr,
+	&dev_attr_flowcontrolled.attr,
+	NULL
+};
+
+static struct attribute_group gta02_gsm_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gsm_sysfs_entries,
+};
+
+static int __init gta02_gsm_probe(struct platform_device *pdev)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+	case GTA02v2_SYSTEM_REV:
+	case GTA02v3_SYSTEM_REV:
+	case GTA02v4_SYSTEM_REV:
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		break;
+	default:
+		/* TODO: fail */
+		dev_warn(&pdev->dev, "Unknown Neo1973 Revision 0x%x, "
+			 "some PM features not available!!!\n",
+			 system_rev);
+		break;
+	}
+
+	/* note that download initially disabled, and enforce that */
+	gta02_gsm.gpio_ndl_gsm = 1;
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+
+	/* GSM is to be initially off (at boot, or if this module inserted) */
+	gsm_on_off(&pdev->dev, 0);
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+}
+
+static int gta02_gsm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver gta02_gsm_driver = {
+	.probe		= gta02_gsm_probe,
+	.remove		= gta02_gsm_remove,
+	.suspend	= gta02_gsm_suspend,
+	.suspend_late	= gta02_gsm_suspend_late,
+	.resume		= gta02_gsm_resume,
+	.driver		= {
+		.name		= "gta02-pm-gsm",
+	},
+};
+
+static int __devinit gta02_gsm_init(void)
+{
+	return platform_driver_register(&gta02_gsm_driver);
+}
+
+static void gta02_gsm_exit(void)
+{
+	platform_driver_unregister(&gta02_gsm_driver);
+}
+
+module_init(gta02_gsm_init);
+module_exit(gta02_gsm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c
new file mode 100644
index 0000000..5f2b159
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c
@@ -0,0 +1,195 @@
+/*
+ * GTA02 WLAN power management
+ *
+ * (C) 2008, 2009 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <linux/gta02-shadow.h>
+
+#include <mach/gta02.h>
+#include <mach/gta02-pm-wlan.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+
+/* ----- Module hardware reset ("power") ----------------------------------- */
+
+
+void gta02_wlan_reset(int assert_reset)
+{
+	if (assert_reset) {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
+		msleep(200); /* probably excessive but we don't have specs */
+	} else {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
+	}
+}
+
+/* ----- rfkill ------------------------------------------------------------ */
+
+/*
+ * S3C MCI handles suspend/resume through device removal/insertion. In order to
+ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
+ * we therefore need to maintain rfkill state outside the driver.
+ *
+ * This platform driver is as good a place as any other.
+ */
+
+static int (*gta02_wlan_rfkill_cb)(void *user, int on);
+static void *gta02_wlan_rfkill_user;
+static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
+static int gta02_wlan_rfkill_on;
+
+/*
+ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
+ * driver is ready to process rfkill callbacks. To prevent the state from
+ * changing until the driver has completed its initialization, we grab and hold
+ * the rfkill lock.
+ *
+ * A call to gta02_wlan_query_rfkill_lock must be followed by either
+ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
+ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
+ */
+
+int gta02_wlan_query_rfkill_lock(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	return gta02_wlan_rfkill_on;
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
+
+void gta02_wlan_query_rfkill_unlock(void)
+{
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
+
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
+{
+	BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = cb;
+	gta02_wlan_rfkill_user = user;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
+
+void gta02_wlan_clear_rfkill_cb(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	BUG_ON(!gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = NULL;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
+
+static int gta02_wlan_toggle_radio(void *data, enum rfkill_state state)
+{
+	struct device *dev = data;
+	int on = state == RFKILL_STATE_UNBLOCKED;
+	int res = 0;
+
+	dev_dbg(dev, "gta02_wlan_toggle_radio: state %d (%p)\n",
+	    state, gta02_wlan_rfkill_cb);
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	if (gta02_wlan_rfkill_cb)
+		res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, on);
+	if (!res)
+		gta02_wlan_rfkill_on = on;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+	return res;
+}
+
+
+/* ----- Initialization/removal -------------------------------------------- */
+
+
+static int __init gta02_wlan_probe(struct platform_device *pdev)
+{
+	/* default-on for now */
+	const int default_state = 1;
+	struct rfkill *rfkill;
+	int error;
+
+	dev_info(&pdev->dev, "starting\n");
+
+	s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
+	gta02_wlan_reset(1);
+	gta02_wlan_reset(0);
+
+	rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_WLAN);
+	rfkill->name = "ar6000";
+	rfkill->data = &pdev->dev;
+	rfkill->state = default_state ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
+	/*
+	 * If the WLAN driver somehow managed to get activated before we're
+	 * ready, the driver is now in an unknown state, which isn't something
+	 * we're prepared to handle. This can't happen, so just fail hard.
+	 */
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_on = default_state;
+	rfkill->toggle_radio = gta02_wlan_toggle_radio;
+
+	error = rfkill_register(rfkill);
+	if (error) {
+		rfkill_free(rfkill);
+		return error;
+	}
+
+	dev_set_drvdata(&pdev->dev, rfkill);
+
+	return 0;
+}
+
+static int gta02_wlan_remove(struct platform_device *pdev)
+{
+	struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
+
+	rfkill_unregister(rfkill);
+	rfkill_free(rfkill);
+
+	return 0;
+}
+
+static struct platform_driver gta02_wlan_driver = {
+	.probe		= gta02_wlan_probe,
+	.remove		= gta02_wlan_remove,
+	.driver		= {
+		.name		= "gta02-pm-wlan",
+	},
+};
+
+static int __devinit gta02_wlan_init(void)
+{
+	return platform_driver_register(&gta02_wlan_driver);
+}
+
+static void gta02_wlan_exit(void)
+{
+	platform_driver_unregister(&gta02_wlan_driver);
+}
+
+module_init(gta02_wlan_init);
+module_exit(gta02_wlan_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-shadow.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-shadow.c
new file mode 100644
index 0000000..c65304a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-shadow.c
@@ -0,0 +1,86 @@
+/*
+ * Common utility code for GTA02
+ *
+ * Copyright (C) 2008 by Openmoko, Inc.
+ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/gpio.h>
+#include <mach/regs-gpio.h>
+#include <linux/gta02-shadow.h>
+
+/**
+ * Shadow GPIO bank B handling. For the LEDs we need to keep track of the state
+ * in software. The s3c2410_gpio_setpin must not be used for GPIOs on bank B
+ */
+static unsigned long gpb_mask;
+static unsigned long gpb_state;
+
+void gta02_gpb_add_shadow_gpio(unsigned int gpio)
+{
+	unsigned long offset = S3C2410_GPIO_OFFSET(gpio);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	gpb_mask |= 1L << offset;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gta02_gpb_add_shadow_gpio);
+
+static void set_shadow_gpio(unsigned long offset, unsigned int value)
+{
+	unsigned long state = value != 0;
+
+	gpb_state &= ~(1L << offset);
+	gpb_state |= state << offset;
+}
+
+void gta02_gpb_setpin(unsigned int pin, unsigned to)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0);
+	unsigned long offset = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long dat;
+
+	BUG_ON(base != S3C24XX_GPIO_BASE(pin));
+
+	local_irq_save(flags);
+	dat = __raw_readl(base + 0x04);
+
+	/* Add the shadow values */
+	dat &= ~gpb_mask;
+	dat |= gpb_state;
+
+	/* Do the operation like s3c2410_gpio_setpin */
+	dat &= ~(1L << offset);
+	dat |= to << offset;
+
+	/* Update the shadow state */
+	if ((1L << offset) & gpb_mask)
+		set_shadow_gpio(offset, to);
+
+	__raw_writel(dat, base + 0x04);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gta02_gpb_setpin);
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
new file mode 100644
index 0000000..f15180a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
@@ -0,0 +1 @@
+extern int gta02_pm_gps_is_on(void);
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h
new file mode 100644
index 0000000..07c0728
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h
@@ -0,0 +1 @@
+extern int gta_gsm_interrupts;
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
new file mode 100644
index 0000000..4836978
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_GTA02_PM_WLAN_H
+#define __MACH_GTA02_PM_WLAN_H
+
+void gta02_wlan_reset(int assert_reset);
+int gta02_wlan_query_rfkill_lock(void);
+void gta02_wlan_query_rfkill_unlock(void);
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
+void gta02_wlan_clear_rfkill_cb(void);
+
+#endif /* __MACH_GTA02_PM_WLAN_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
new file mode 100644
index 0000000..d8d9d90
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -0,0 +1,85 @@
+#ifndef _GTA02_H
+#define _GTA02_H
+
+#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
+
+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
+#define GTA02v1_SYSTEM_REV	0x00000310
+#define GTA02v2_SYSTEM_REV	0x00000320
+#define GTA02v3_SYSTEM_REV	0x00000330
+#define GTA02v4_SYSTEM_REV	0x00000340
+#define GTA02v5_SYSTEM_REV	0x00000350
+#define GTA02v6_SYSTEM_REV	0x00000360
+
+#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA13	/* v1 + v2 + v3 only */
+
+#define GTA02_GPIO_PWR_LED1	S3C2410_GPB0
+#define GTA02_GPIO_PWR_LED2	S3C2410_GPB1
+#define GTA02_GPIO_AUX_LED	S3C2410_GPB2
+#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB3
+#define GTA02_GPIO_MODEM_RST	S3C2410_GPB5
+#define GTA02_GPIO_BT_EN	S3C2410_GPB6
+#define GTA02_GPIO_MODEM_ON	S3C2410_GPB7
+#define GTA02_GPIO_EXTINT8	S3C2410_GPB8
+#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB9
+
+#define GTA02_GPIO_PIO5		S3C2410_GPC5	/* v3 + v4 only */
+#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD12	/* v3 + v4 only */
+#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD13	/* v3 + v4 only */
+#define GTA02v5_GPIO_HDQ	S3C2410_GPD14   /* v5 + */
+
+#define GTA02_GPIO_nG1_INT	S3C2410_GPF0
+#define GTA02_GPIO_IO1		S3C2410_GPF1
+#define GTA02_GPIO_PIO_2	S3C2410_GPF2	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF4
+#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF5	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_AUX_KEY	S3C2410_GPF6
+#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF7
+
+#define GTA02_GPIO_3D_IRQ	S3C2410_GPG4
+#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG8	/* v2 + v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG9	/* v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG10	/* v3 + v4 only */
+#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG11	/* v3 + v4 only */
+
+#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
+#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
+#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
+#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
+#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
+#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
+#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
+#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
+#define GTA02_IRQ_MODEM		IRQ_EINT1
+#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
+#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
+#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
+#define GTA02_IRQ_AUX		IRQ_EINT6
+#define GTA02_IRQ_nHOLD		IRQ_EINT7
+#define GTA02_IRQ_PCF50633	IRQ_EINT9
+#define GTA02_IRQ_3D		IRQ_EINT12
+#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
+#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
+
+/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
+#define GTA02_PCB_ID1_0		S3C2410_GPC13
+#define GTA02_PCB_ID1_1		S3C2410_GPC15
+#define GTA02_PCB_ID1_2		S3C2410_GPD0
+#define GTA02_PCB_ID2_0		S3C2410_GPD3
+#define GTA02_PCB_ID2_1		S3C2410_GPD4
+
+int gta02_get_pcb_revision(void);
+
+extern struct pcf50633 *gta02_pcf;
+
+#endif /* _GTA02_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
new file mode 100644
index 0000000..3ae2a81
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
@@ -0,0 +1,1718 @@
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/glamo.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/lis302dl.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+#include <mach/mci.h>
+#include <mach/ts.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/spi-gpio.h>
+#include <plat/pwm.h>
+#include <mach/cpu.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
+#include <plat/usb-control.h>
+#include <plat/regs-timer.h>
+
+#include <mach/gta02-pm-gsm.h>
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+#include <linux/jbt6k74.h>
+#include <linux/glamofb.h>
+
+#include <linux/hdq.h>
+#include <linux/bq27000_battery.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+#include <linux/touchscreen/ts_filter_linear.h>
+#include <linux/touchscreen/ts_filter_mean.h>
+#include <linux/touchscreen/ts_filter_median.h>
+#include <linux/touchscreen/ts_filter_group.h>
+#endif
+
+#include <asm/fiq.h>
+
+#include <linux/gta02-vibrator.h>
+#include <linux/gta02-shadow.h>
+
+/* arbitrates which sensor IRQ owns the shared SPI bus */
+static spinlock_t motion_irq_lock;
+
+
+/* -------------------------------------------------------------------------------
+ * GTA02 FIQ related
+ *
+ * Calls into vibrator and hdq and based on the return values
+ * determines if we the FIQ source be kept alive
+ */
+
+#define DIVISOR_FROM_US(x) ((x) << 3)
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+extern int hdq_fiq_handler(void);
+#endif
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
+extern int gta02_vibrator_fiq_handler(void);
+#endif
+
+#if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
+
+/* Global data related to our fiq source */
+static u32 gta02_fiq_ack_mask;
+static struct s3c2410_pwm gta02_fiq_pwm_timer;
+static u16 gta02_fiq_timer_index;
+static int gta02_fiq_irq;
+
+static void gta02_fiq_handler(void)
+{
+	u16 divisor = 0xffff;
+
+	/* Vibrator servicing */
+
+	/* disable further timer interrupts if nobody has any work
+	 * or adjust rate according to who still has work
+	 *
+	 * CAUTION: it means forground code must disable FIQ around
+	 * its own non-atomic S3C2410_INTMSK changes... not common
+	 * thankfully and taken care of by the fiq-basis patch
+	 */
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+	if (gta02_vibrator_fiq_handler())
+		divisor = FIQ_DIVISOR_VIBRATOR;
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+	if (hdq_fiq_handler())
+		divisor = FIQ_DIVISOR_HDQ;
+#endif
+
+	if (divisor == 0xffff) /* mask the fiq irq source */
+		__raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
+			     S3C2410_INTMSK);
+	else /* still working, maybe at a different rate */
+		__raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
+
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
+}
+
+static void gta02_fiq_kick(void)
+{
+	unsigned long flags;
+	u32 tcon;
+
+	/* we have to take care about FIQ because this modification is
+	 * non-atomic, FIQ could come in after the read and before the
+	 * writeback and its changes to the register would be lost
+	 * (platform INTMSK mod code is taken care of already)
+	 */
+	local_save_flags(flags);
+	local_fiq_disable();
+	/* allow FIQs to resume */
+	__raw_writel(__raw_readl(S3C2410_INTMSK) &
+		     ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
+		     S3C2410_INTMSK);
+	tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
+	/* fake the timer to a count of 1 */
+	__raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
+	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
+		     S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
+	local_irq_restore(flags);
+}
+
+static int gta02_fiq_enable(void)
+{
+	int irq_index_fiq = IRQ_TIMER3;
+	int rc = 0;
+
+	local_fiq_disable();
+
+	gta02_fiq_irq = irq_index_fiq;
+	gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
+	gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
+
+	/* set up the timer to operate as a pwm device */
+
+	rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
+	gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
+	gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
+	/* default rate == ~32us */
+	gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
+
+	rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	s3c2410_pwm_start(&gta02_fiq_pwm_timer);
+
+	/* let our selected interrupt be a magic FIQ interrupt */
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
+
+	/* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
+	local_fiq_enable();
+
+	set_fiq_c_handler(gta02_fiq_handler);
+
+	return 0;
+
+bail:
+	printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
+
+	return rc;
+}
+
+static void gta02_fiq_disable(void)
+{
+	__raw_writel(0, S3C2410_INTMOD);
+	local_fiq_disable();
+	gta02_fiq_irq = 0; /* no active source interrupt now either */
+
+}
+/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
+
+#endif
+
+/*
+ * this gets called every 1ms when we paniced.
+ */
+
+static long gta02_panic_blink(long count)
+{
+	long delay = 0;
+	static long last_blink;
+	static char led;
+
+	if (count - last_blink < 100) /* 200ms period, fast blink */
+		return 0;
+
+	led ^= 1;
+	s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
+	gta02_gpb_setpin(GTA02_GPIO_AUX_LED, led);
+
+	last_blink = count;
+	return delay;
+}
+
+
+/**
+ * returns PCB revision information in b9,b8 and b2,b1,b0
+ * Pre-GTA02 A6 returns 0x000
+ *     GTA02 A6 returns 0x101
+ *     ...
+ */
+
+int gta02_get_pcb_revision(void)
+{
+	int n;
+	int u = 0;
+	static unsigned long pinlist[] = {
+		GTA02_PCB_ID1_0,
+		GTA02_PCB_ID1_1,
+		GTA02_PCB_ID1_2,
+		GTA02_PCB_ID2_0,
+		GTA02_PCB_ID2_1,
+	};
+	static int pin_offset[] = {
+		0, 1, 2, 8, 9
+	};
+
+	for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
+		/*
+		 * set the PCB version GPIO to be pulled-down input
+		 * force low briefly first
+		 */
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_setpin(pinlist[n], 0);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pinlist[n], 1);
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
+
+		udelay(10);
+
+		if (s3c2410_gpio_getpin(pinlist[n]))
+			u |= 1 << pin_offset[n];
+
+		/*
+		* when not being interrogated, all of the revision GPIO
+		* are set to output HIGH without pulldown so no current flows
+		* if they are NC or pulled up.
+		*/
+		s3c2410_gpio_setpin(pinlist[n], 1);
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pinlist[n], 0);
+	}
+
+	return u;
+}
+
+struct platform_device gta02_resume_reason_device = {
+	.name 		= "gta02-resume",
+	.num_resources	= 0,
+};
+
+static struct map_desc gta02_iodesc[] __initdata = {
+	{
+		.virtual	= 0xe0000000,
+		.pfn		= __phys_to_pfn(S3C2410_CS3+0x01000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+
+};
+
+struct pcf50633 *gta02_pcf;
+
+#ifdef CONFIG_CHARGER_PCF50633
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+static int gta02_get_charger_online_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
+}
+
+static int gta02_get_charger_active_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
+}
+#endif
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+	int  ma;
+
+	/* Interpret charger type */
+	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+		/* Stop GPO driving out now that we have a IA charger */
+		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+		ma = 1000;
+	} else
+		ma = 100;
+
+	pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	if (gta02_usb_vbus_draw) {
+		pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
+		return;
+	} else {
+#ifdef CONFIG_PCF50633_ADC
+		pcf50633_adc_async_read(pcf,
+			PCF50633_ADCC1_MUX_ADCIN1,
+			PCF50633_ADCC1_AVERAGE_16,
+			gta02_configure_pmu_for_charger, NULL);
+#else
+		/* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
+		pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+		return;
+	}
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+	if (irq == PCF50633_IRQ_USBINS) {
+		schedule_delayed_work(&gta02_charger_work,
+				GTA02_CHARGER_CONFIGURE_TIMEOUT);
+		return;
+	} else if (irq == PCF50633_IRQ_USBREM) {
+		cancel_delayed_work_sync(&gta02_charger_work);
+		gta02_usb_vbus_draw = 0;
+	}
+}
+
+static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
+{
+	pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
+			PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+        if (!gta02_pcf)
+		return;
+
+	gta02_usb_vbus_draw = ma;
+
+	schedule_delayed_work(&gta02_charger_work,
+				GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+
+static int gta02_udc_vbus_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+	if (!gta02_pcf)
+		return -ENODEV;
+
+	return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
+}
+
+#else /* !CONFIG_CHARGER_PCF50633 */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define gta02_get_charger_online_status NULL
+#define gta02_get_charger_active_status NULL
+#endif
+#define gta02_pmu_event_callback        NULL
+#define gta02_udc_vbus_draw             NULL
+#define gta02_udc_vbus_status		NULL
+#endif
+
+
+static struct platform_device gta02_pm_gps_dev = {
+	.name		= "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+	.name		= "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+	.name		= "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+	.name		= "gta02-pm-wlan",
+};
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device.  Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent.  This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static struct platform_device gta02_glamo_dev;
+static void mangle_glamo_res_by_system_rev(void);
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
+
+static struct regulator_consumer_supply ldo4_consumers[] = {
+	{
+		.dev = &gta02_pm_bt_dev.dev,
+		.supply = "BT_3V2",
+	},
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+	{
+		.dev = &gta02_pm_gps_dev.dev,
+		.supply = "RF_3V",
+	},
+};
+
+/*
+ * We need this dummy thing to fill the regulator consumers
+ */
+static struct platform_device gta02_mmc_dev = {
+	/* details filled in by glamo core */
+};
+
+static struct regulator_consumer_supply hcldo_consumers[] = {
+	{
+		.dev = &gta02_mmc_dev.dev,
+		.supply = "SD_3V3",
+	},
+};
+
+static char *gta02_batteries[] = {
+	"battery",
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+	.resumers = {
+		[0] = 	PCF50633_INT1_USBINS |
+			PCF50633_INT1_USBREM |
+			PCF50633_INT1_ALARM,
+		[1] = 	PCF50633_INT2_ONKEYF,
+		[2] = 	PCF50633_INT3_ONKEY1S,
+		[3] = 	PCF50633_INT4_LOWSYS |
+			PCF50633_INT4_LOWBAT |
+			PCF50633_INT4_HIGHTMP,
+	},
+
+	.batteries = gta02_batteries,
+	.num_batteries = ARRAY_SIZE(gta02_batteries),
+	.charging_restart_interval = (900 * HZ),
+	.chg_ref_current_ma = 1000,
+
+	.reg_init_data = {
+		[PCF50633_REGULATOR_AUTO] = {
+			.constraints = {
+				.name = "IO_3V3",
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.boot_on = 1,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_DOWN1] = {
+			.constraints = {
+				.name = "CORE_1V3",
+				.min_uV = 1300000,
+				.max_uV = 1600000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.boot_on = 1,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_DOWN2] = {
+			.constraints = {
+				.name = "IO_1V8",
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.boot_on = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_HCLDO] = {
+			.constraints = {
+				.name = "SD_3V3",
+				.min_uV = 2000000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+				.boot_on = 1,
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = hcldo_consumers,
+		},
+		[PCF50633_REGULATOR_LDO1] = {
+			.constraints = {
+				.name = "GSENSOR_3V3",
+				.min_uV = 1300000,
+				.max_uV = 1300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO2] = {
+			.constraints = {
+				.name = "CODEC_3V3",
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO3] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO4] = {
+			.constraints = {
+				.name = "BT_3V2",
+				.min_uV = 3200000,
+				.max_uV = 3200000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = ldo4_consumers,
+		},
+		[PCF50633_REGULATOR_LDO5] = {
+			.constraints = {
+				.name = "RF_3V",
+				.min_uV = 1500000,
+				.max_uV = 1500000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = ldo5_consumers,
+		},
+		[PCF50633_REGULATOR_LDO6] = {
+			.constraints = {
+				.name = "LCM_3V",
+				.min_uV = 0,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_MEMLDO] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+
+	},
+	.probe_done = gta02_pmu_attach_child_devices,
+	.regulator_registered = gta02_pmu_regulator_registered,
+	.mbc_event_callback = gta02_pmu_event_callback,
+	.force_shutdown = gta02_pmu_force_shutdown,
+};
+
+static void mangle_pmu_pdata_by_system_rev(void)
+{
+	struct regulator_init_data *reg_init_data;
+
+	reg_init_data = gta02_pcf_pdata.reg_init_data;
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+		/* FIXME: this is only in v1 due to wrong PMU variant */
+		reg_init_data[PCF50633_REGULATOR_DOWN2]
+					.constraints.state_mem.enabled = 1;
+		break;
+	case GTA02v2_SYSTEM_REV:
+	case GTA02v3_SYSTEM_REV:
+	case GTA02v4_SYSTEM_REV:
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.min_uV = 3300000;
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.min_uV = 3300000;
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.state_mem.enabled = 0;
+
+		reg_init_data[PCF50633_REGULATOR_LDO5]
+					.constraints.min_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO5]
+					.constraints.max_uV = 3000000;
+
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.min_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.max_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.apply_uV = 1;
+		break;
+	default:
+		break;
+	}
+}
+
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+	.name = "battery",
+	.rsense_mohms = 20,
+	.hdq_read = hdq_read,
+	.hdq_write = hdq_write,
+	.hdq_initialized = hdq_initialized,
+	.get_charger_online_status = gta02_get_charger_online_status,
+	.get_charger_active_status = gta02_get_charger_active_status
+};
+
+struct platform_device bq27000_battery_device = {
+	.name 		= "bq27000-battery",
+	.dev = {
+		.platform_data = &bq27000_pdata,
+	},
+};
+
+/* HDQ */
+
+static void gta02_hdq_attach_child_devices(struct device *parent_device)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		bq27000_battery_device.dev.parent = parent_device;
+		platform_device_register(&bq27000_battery_device);
+		break;
+	default:
+		break;
+	}
+}
+
+static void gta02_hdq_gpio_direction_out(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
+}
+
+static void gta02_hdq_gpio_direction_in(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
+}
+
+static void gta02_hdq_gpio_set_value(int val)
+{
+
+	s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
+}
+
+static int gta02_hdq_gpio_get_value(void)
+{
+	return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
+}
+
+static struct resource gta02_hdq_resources[] = {
+	[0] = {
+		.start	= GTA02v5_GPIO_HDQ,
+		.end	= GTA02v5_GPIO_HDQ,
+	},
+};
+
+struct hdq_platform_data gta02_hdq_platform_data = {
+	.attach_child_devices = gta02_hdq_attach_child_devices,
+	.gpio_dir_out = gta02_hdq_gpio_direction_out,
+	.gpio_dir_in = gta02_hdq_gpio_direction_in,
+	.gpio_set = gta02_hdq_gpio_set_value,
+	.gpio_get = gta02_hdq_gpio_get_value,
+
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+
+};
+
+struct platform_device gta02_hdq_device = {
+	.name 		= "hdq",
+	.num_resources	= 1,
+	.resource	= gta02_hdq_resources,
+	.dev		= {
+		.platform_data = &gta02_hdq_platform_data,
+	},
+};
+#endif
+
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+/* vibrator (child of FIQ) */
+
+static struct resource gta02_vibrator_resources[] = {
+	[0] = {
+		.start	= GTA02_GPIO_VIBRATOR_ON,
+		.end	= GTA02_GPIO_VIBRATOR_ON,
+	},
+};
+struct gta02_vib_platform_data gta02_vib_pdata = {
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+};
+
+static struct platform_device gta02_vibrator_dev = {
+	.name		= "gta02-vibrator",
+	.num_resources	= ARRAY_SIZE(gta02_vibrator_resources),
+	.resource	= gta02_vibrator_resources,
+	.dev	 = {
+		.platform_data = &gta02_vib_pdata,
+		},
+};
+#endif
+
+/* NOR Flash */
+
+#define GTA02_FLASH_BASE	S3C2410_CS3 /* GCS3 */
+#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+	.width		= 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+	.start		= GTA02_FLASH_BASE,
+	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &gta02_nor_flash_data,
+			},
+	.resource	= &gta02_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+	.name 		= "s3c24xx_pwm",
+	.num_resources	= 0,
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf50633", 0x73),
+		.irq = GTA02_IRQ_PCF50633,
+		.platform_data = &gta02_pcf_pdata,
+	},
+	{
+		I2C_BOARD_INFO("wm8753", 0x1a),
+	},
+};
+
+static struct s3c2410_nand_set gta02_nand_sets[] = {
+	[0] = {
+		.name		= "neo1973-nand",
+		.nr_chips	= 1,
+		.flags		= S3C2410_NAND_BBT,
+	},
+};
+
+/* choose a set of timings derived from S3C@2442B MCP54 
+ * data sheet (K5D2G13ACM-D075 MCP Memory)
+ */
+
+static struct s3c2410_platform_nand gta02_nand_info = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+	.sets		= gta02_nand_sets,
+	.software_ecc	= 1,
+};
+
+
+static void gta02_s3c_mmc_set_power(unsigned char power_mode,
+    unsigned short vdd)
+{
+	static int is_on = -1;
+	int on;
+
+	on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
+	if (is_on != on)
+		gta02_wlan_reset(!on);
+	is_on = on;
+}
+
+
+static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
+	.set_power	= gta02_s3c_mmc_set_power,
+};
+
+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
+	    gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
+		gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
+		/* FIXME! */
+		break;
+	default:
+		break;
+	}
+}
+
+/* get PMU to set USB current limit accordingly */
+
+static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+	.vbus_draw	= gta02_udc_vbus_draw,
+	.udc_command	= gta02_udc_command,
+/*	.get_vbus_status = gta02_udc_vbus_status,*/
+};
+
+
+/* Touchscreen configuration. */
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+const static struct ts_filter_group_configuration gta02_ts_group = {
+	.length = 12,
+	.close_enough = 10,
+	.threshold = 6,		/* At least half of the points in a group. */
+	.attempts = 10,
+};
+
+const static struct ts_filter_median_configuration gta02_ts_median = {
+	.extent = 20,
+	.decimation_below = 3,
+	.decimation_threshold = 8 * 3,
+	.decimation_above = 4,
+};
+
+const static struct ts_filter_mean_configuration gta02_ts_mean = {
+	.length = 4,
+};
+
+const static struct ts_filter_linear_configuration gta02_ts_linear = {
+	.constants = {1, 0, 0, 0, 1, 0, 1},	/* Don't modify coords. */
+	.coord0 = 0,
+	.coord1 = 1,
+};
+#endif
+
+const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
+{
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+	{&ts_filter_group_api,		&gta02_ts_group.config},
+	{&ts_filter_median_api,		&gta02_ts_median.config},
+	{&ts_filter_mean_api,		&gta02_ts_mean.config},
+	{&ts_filter_linear_api,		&gta02_ts_linear.config},
+#endif
+	{NULL, NULL},
+};
+
+const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
+	.delay = 10000,
+	.presc = 0xff, /* slow as we can go */
+	.filter_config = gta02_filter_configuration,
+};
+
+
+
+static void gta02_bl_set_intensity(int intensity)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+	int ret;
+
+	intensity >>= 2;
+
+	/*
+	 * One code path that leads here is from a kernel panic. Trying to turn
+	 * the backlight on just gives us a nearly endless stream of complaints
+	 * and accomplishes nothing. We can't win. Just give up.
+	 *
+	 * In the unlikely event that there's another path leading here while
+	 * we're atomic, we print at least a warning.
+	 */
+	if (in_atomic()) {
+		printk(KERN_ERR
+		    "gta02_bl_set_intensity called while atomic\n");
+		return;
+	}
+
+	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
+		old_intensity = 0;
+	else
+		old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+
+	if (intensity == old_intensity)
+		return;
+
+	/* We can't do this anywhere else */
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+
+	/*
+	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
+	 * if seen, you have to re-enable the LED unit
+	 */
+	if (!intensity || !old_intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+
+	if (!intensity) /* illegal to set LEDOUT to 0 */
+		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+									     2);
+	else
+		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+			       intensity);
+
+	if (intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+
+}
+
+static struct generic_bl_info gta02_bl_info = {
+	.name 			= "gta02-bl",
+	.max_intensity 		= 0xff,
+	.default_intensity 	= 0xff,
+	.set_bl_intensity 	= gta02_bl_set_intensity,
+};
+
+static struct platform_device gta02_bl_dev = {
+	.name		  = "generic-bl",
+	.id		  = 1,
+	.dev = {
+		.platform_data = &gta02_bl_info,
+	},
+};
+
+/* SPI: LCM control interface attached to Glamo3362 */
+
+static void gta02_jbt6k74_reset(int devidx, int level)
+{
+	glamo_lcm_reset(level);
+}	
+
+static void gta02_jbt6k74_probe_completed(struct device *dev)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	/* Switch on backlight. Qi does not do it for us */
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
+
+	gta02_bl_dev.dev.parent = dev;
+	platform_device_register(&gta02_bl_dev);
+}
+
+const struct jbt6k74_platform_data jbt6k74_pdata = {
+	.reset		= gta02_jbt6k74_reset,
+	.probe_completed = gta02_jbt6k74_probe_completed,
+};
+
+#if 0 /* currently this is not used and we use gpio spi */
+static struct glamo_spi_info glamo_spi_cfg = {
+	.board_size	= ARRAY_SIZE(gta02_spi_board_info),
+	.board_info	= gta02_spi_board_info,
+};
+#endif /* 0 */
+
+static struct glamo_spigpio_info glamo_spigpio_cfg = {
+	.pin_clk	= GLAMO_GPIO10_OUTPUT,
+	.pin_mosi	= GLAMO_GPIO11_OUTPUT,
+	.pin_cs		= GLAMO_GPIO12_OUTPUT,
+	.pin_miso	= 0,
+	.bus_num	= 2,
+};
+
+/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
+{
+	struct lis302dl_platform_data *pdata = lis->pdata;
+
+	if (!resume) {
+		 /*
+		 * we don't want to power them with a high level
+		 * because GSENSOR_3V3 is not up during suspend
+		 */
+		s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
+		s3c2410_gpio_setpin(pdata->pin_clk, 0);
+		s3c2410_gpio_setpin(pdata->pin_mosi, 0);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pdata->pin_miso, 1);
+		return;
+	}
+
+	/* back to normal */
+	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
+	s3c2410_gpio_setpin(pdata->pin_clk, 1);
+	/* misnomer: it is a pullDOWN in 2442 */
+	s3c2410_gpio_pullup(pdata->pin_miso, 0);
+
+	s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
+
+}
+
+struct lis302dl_platform_data lis302_pdata_top = {
+		.name		= "lis302-1 (top)",
+		.pin_chip_select= S3C2410_GPD12,
+		.pin_clk	= S3C2410_GPG7,
+		.pin_mosi	= S3C2410_GPG6,
+		.pin_miso	= S3C2410_GPG5,
+		.interrupt	= GTA02_IRQ_GSENSOR_1,
+		.open_drain	= 1, /* altered at runtime by PCB rev */
+		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+struct lis302dl_platform_data lis302_pdata_bottom = {
+		.name		= "lis302-2 (bottom)",
+		.pin_chip_select= S3C2410_GPD13,
+		.pin_clk	= S3C2410_GPG7,
+		.pin_mosi	= S3C2410_GPG6,
+		.pin_miso	= S3C2410_GPG5,
+		.interrupt	= GTA02_IRQ_GSENSOR_2,
+		.open_drain	= 1, /* altered at runtime by PCB rev */
+		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+static struct spi_board_info gta02_spi_board_info[] = {
+	{
+		.modalias	= "jbt6k74",
+		/* platform_data */
+		.platform_data	= &jbt6k74_pdata,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 2,
+		/* chip_select */
+	},
+	{
+		.modalias	= "lis302dl",
+		/* platform_data */
+		.platform_data	= &lis302_pdata_top,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 3,
+		.chip_select	= 0,
+	},
+
+	{
+		.modalias	= "lis302dl",
+		/* platform_data */
+		.platform_data	= &lis302_pdata_bottom,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 3,
+		.chip_select	= 1,
+	},
+
+};
+
+static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
+{
+
+	/*
+	 * Huh... "quirk"... CS on this device is not really "CS" like you can
+	 * expect.
+	 *
+	 * When it is 0 it selects SPI interface mode.
+	 * When it is 1 it selects I2C interface mode.
+	 *
+	 * Because we have 2 devices on one interface we have to make sure
+	 * that the "disabled" device (actually in I2C mode) don't think we're
+	 * talking to it.
+	 *
+	 * When we talk to the "enabled" device, the "disabled" device sees
+	 * the clocks as I2C clocks, creating havoc.
+	 *
+	 * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
+	 * must ensure this is never issued.
+	 */
+
+	int cs_gpio, other_cs_gpio;
+
+	cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
+	other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
+	
+
+	if (cs == BITBANG_CS_ACTIVE) {
+		s3c2410_gpio_setpin(other_cs_gpio, 1);
+		s3c2410_gpio_setpin(cs_gpio, 1);
+		s3c2410_gpio_setpin(info->pin_clk, 1);
+		s3c2410_gpio_setpin(cs_gpio, 0);
+	} else {
+		s3c2410_gpio_setpin(cs_gpio, 1);
+		s3c2410_gpio_setpin(other_cs_gpio, 1);
+	} 
+}
+
+static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
+	.pin_clk	= S3C2410_GPG7,
+	.pin_mosi	= S3C2410_GPG6,
+	.pin_miso	= S3C2410_GPG5,
+	.bus_num	= 3,
+	.num_chipselect	= 2,
+	.chip_select	= gta02_lis302_chip_select,
+	.non_blocking_transfer = 1,
+};
+
+static struct platform_device gta02_spi_gpio_dev = {
+	.name		= "spi_s3c24xx_gpio",
+	.dev = {
+		.platform_data = &gta02_spigpio_cfg,
+	},
+};
+
+/*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+static struct resource gta02_led_resources[] = {
+	{
+		.name	= "gta02-power:orange",
+		.start	= GTA02_GPIO_PWR_LED1,
+		.end	= GTA02_GPIO_PWR_LED1,
+	}, {
+		.name	= "gta02-power:blue",
+		.start	= GTA02_GPIO_PWR_LED2,
+		.end	= GTA02_GPIO_PWR_LED2,
+	}, {
+		.name	= "gta02-aux:red",
+		.start	= GTA02_GPIO_AUX_LED,
+		.end	= GTA02_GPIO_AUX_LED,
+	},
+};
+
+struct platform_device gta02_led_dev = {
+	.name		= "gta02-led",
+	.num_resources	= ARRAY_SIZE(gta02_led_resources),
+	.resource	= gta02_led_resources,
+};
+
+static struct resource gta02_button_resources[] = {
+	[0] = {
+		.start = GTA02_GPIO_AUX_KEY,
+		.end   = GTA02_GPIO_AUX_KEY,
+	},
+	[1] = {
+		.start = GTA02_GPIO_HOLD_KEY,
+		.end   = GTA02_GPIO_HOLD_KEY,
+	},
+	[2] = {
+		.start = GTA02_GPIO_JACK_INSERT,
+		.end   = GTA02_GPIO_JACK_INSERT,
+	},
+	[3] = {
+		.start = 0,
+		.end   = 0,
+	},
+	[4] = {
+		.start = 0,
+		.end   = 0,
+	},
+};
+
+static struct platform_device gta02_button_dev = {
+	.name		= "gta02-button",
+	.num_resources	= ARRAY_SIZE(gta02_button_resources),
+	.resource	= gta02_button_resources,
+};
+
+static struct platform_device gta02_pm_usbhost_dev = {
+	.name		= "gta02-pm-host",
+};
+
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
+
+static int glamo_irq_is_wired(void)
+{
+	int rc;
+	int count = 0;
+
+	/*
+	* GTA02 S-Media IRQs prior to A5 are broken due to a lack of
+	* a pullup on the INT# line.  Check for the bad behaviour.
+	*/
+	s3c2410_gpio_setpin(S3C2410_GPG4, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
+	/*
+	* we force it low ourselves for a moment and resume being input.
+	* If there is a pullup, it won't stay low for long.  But if the
+	* level converter is there as on < A5 revision, the weak keeper
+	* on the input of the LC will hold the line low indefinitiely
+	*/
+	do
+		rc = s3c2410_gpio_getpin(S3C2410_GPG4);
+	while ((!rc) && ((count++) < 10));
+	if (rc) { /* it got pulled back up, it's good */
+		printk(KERN_INFO "Detected S-Media IRQ# pullup, "
+		"enabling interrupt\n");
+		return 0;
+	} else  /* Gah we can't work with this level converter */
+		printk(KERN_WARNING "** Detected bad IRQ# circuit found"
+		" on pre-A5 GTA02: S-Media interrupt disabled **\n");
+	return -ENODEV;
+}
+
+static int gta02_glamo_can_set_mmc_power(void)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+		case GTA02v3_SYSTEM_REV:
+		case GTA02v4_SYSTEM_REV:
+		case GTA02v5_SYSTEM_REV:
+		case GTA02v6_SYSTEM_REV:
+			return 1;
+	}
+
+	return 0;
+}
+
+/* Smedia Glamo 3362 */
+
+/*
+ * we crank down SD Card clock dynamically when GPS is powered
+ */
+
+static int gta02_glamo_mci_use_slow(void)
+{
+	return gta02_pm_gps_is_on();
+}
+
+static void gta02_glamo_external_reset(int level)
+{
+	s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
+	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
+}
+
+static struct glamofb_platform_data gta02_glamo_pdata = {
+	.width		= 43,
+	.height		= 58,
+	 /* 24.5MHz --> 40.816ns */
+	.pixclock	= 40816,
+	.left_margin	= 8,
+	.right_margin	= 16,
+	.upper_margin	= 2,
+	.lower_margin	= 16,
+	.hsync_len	= 8,
+	.vsync_len	= 2,
+	.fb_mem_size	= 0x400000, /* glamo has 8 megs of SRAM. we use 4 */
+	.xres		= {
+		.min	= 240,
+		.max	= 640,
+		.defval	= 480,
+	},
+	.yres		= {
+		.min	= 320,
+		.max	= 640,
+		.defval	= 640,
+	},
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval	= 16,
+	},
+	//.spi_info	= &glamo_spi_cfg,
+	.spigpio_info	= &glamo_spigpio_cfg,
+
+	/* glamo MMC function platform data */
+	.mmc_dev = &gta02_mmc_dev,
+	.glamo_can_set_mci_power = gta02_glamo_can_set_mmc_power,
+	.glamo_mci_use_slow = gta02_glamo_mci_use_slow,
+	.glamo_irq_is_wired = glamo_irq_is_wired,
+	.glamo_external_reset = gta02_glamo_external_reset
+};
+
+static struct resource gta02_glamo_resources[] = {
+	[0] = {
+		.start	= S3C2410_CS1,
+		.end	= S3C2410_CS1 + 0x1000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= GTA02_IRQ_3D,
+		.end	= GTA02_IRQ_3D,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = GTA02_GPIO_3D_RESET,
+		.end   = GTA02_GPIO_3D_RESET,
+	},
+};
+
+static struct platform_device gta02_glamo_dev = {
+	.name		= "glamo3362",
+	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
+	.resource	= gta02_glamo_resources,
+	.dev		= {
+		.platform_data	= &gta02_glamo_pdata,
+	},
+};
+
+static void mangle_glamo_res_by_system_rev(void)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+		break;
+	default:
+		gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
+		gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
+		break;
+	}
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+	case GTA02v2_SYSTEM_REV:
+	case GTA02v3_SYSTEM_REV:
+	/* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
+		/* The hardware is missing a pull-up resistor and thus can't
+		 * support the Smedia Glamo IRQ */
+		gta02_glamo_resources[1].start = 0;
+		gta02_glamo_resources[1].end = 0;
+		break;
+	}
+}
+
+static void __init gta02_map_io(void)
+{
+	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+static irqreturn_t gta02_modem_irq(int irq, void *param)
+{
+/*	printk(KERN_DEBUG "modem wakeup interrupt\n");*/
+	gta_gsm_interrupts++;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ar6000_wow_irq(int irq, void *param)
+{
+/*	printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
+	return IRQ_HANDLED;
+}
+
+/*
+ * hardware_ecc=1|0
+ */
+static char hardware_ecc_str[4] __initdata = "";
+
+static int __init hardware_ecc_setup(char *str)
+{
+	if (str)
+		strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
+	return 1;
+}
+
+__setup("hardware_ecc=", hardware_ecc_setup);
+
+/* these are the guys that don't need to be children of PMU */
+
+static struct platform_device *gta02_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&s3c_device_nand,
+	&gta02_nor_flash,
+
+	&s3c24xx_pwm_device,
+	&gta02_led_dev,
+	&gta02_pm_wlan_dev, /* not dependent on PMU */
+
+	&s3c_device_iis,
+	&s3c_device_i2c0,
+};
+
+/* these guys DO need to be children of PMU */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+	&s3c_device_ts, /* input 1 */
+	&gta02_pm_gsm_dev,
+	&gta02_pm_usbhost_dev,
+	&gta02_spi_gpio_dev, /* input 2 and 3 */
+	&gta02_button_dev, /* input 4 */
+	&gta02_resume_reason_device,
+};
+
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
+{
+	struct platform_device *regulator, *pdev;
+
+	gta02_pcf = pcf;
+
+	regulator = pcf->regulator_pdev[id];
+
+	switch(id) {
+		case PCF50633_REGULATOR_LDO4:
+			pdev = &gta02_pm_bt_dev;
+			break;
+		case PCF50633_REGULATOR_LDO5:
+			pdev = &gta02_pm_gps_dev;
+			break;
+		case PCF50633_REGULATOR_HCLDO:
+			pdev = &gta02_glamo_dev;
+			break;
+		default:
+            return;
+	}
+
+	pdev->dev.parent = &regulator->dev;
+	platform_device_register(pdev);
+}
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device.  Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent.  This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+	mangle_glamo_res_by_system_rev();
+	platform_add_devices(gta02_devices_pmu_children,
+					ARRAY_SIZE(gta02_devices_pmu_children));
+
+/*    regulator_has_full_constraints();*/
+}
+
+static void gta02_poweroff(void)
+{
+	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
+		  PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+static void __init gta02_machine_init(void)
+{
+	int rc;
+
+	/* set the panic callback to make AUX blink fast */
+	panic_blink = gta02_panic_blink;
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v6_SYSTEM_REV:
+		/* we need push-pull interrupt from motion sensors */
+		lis302_pdata_top.open_drain = 0;
+		lis302_pdata_bottom.open_drain = 0;
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_init(&motion_irq_lock);
+
+#ifdef CONFIG_CHARGER_PCF50633
+	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+#endif
+
+	/* Glamo chip select optimization */
+/*	 *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
+
+	/* do not force soft ecc if we are asked to use hardware_ecc */
+	if (hardware_ecc_str[0] == '1')
+		gta02_nand_info.software_ecc = 0;
+
+	s3c_device_usb.dev.platform_data = &gta02_usb_info;
+	s3c_device_nand.dev.platform_data = &gta02_nand_info;
+	s3c_device_sdi.dev.platform_data = &gta02_s3c_mmc_cfg;
+
+	/* acc sensor chip selects */
+	s3c2410_gpio_setpin(S3C2410_GPD12, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPD13, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
+
+	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+	set_s3c2410ts_info(&gta02_ts_cfg);
+	
+	mangle_glamo_res_by_system_rev();
+
+	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+	spi_register_board_info(gta02_spi_board_info,
+				ARRAY_SIZE(gta02_spi_board_info));
+
+#ifdef CONFIG_CHARGER_PCF50633
+	mangle_pmu_pdata_by_system_rev();
+#endif
+
+	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+
+	s3c_pm_init();
+
+	/* Make sure the modem can wake us up */
+	set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
+	rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
+			 "modem", NULL);
+	if (rc < 0)
+		printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
+	enable_irq_wake(GTA02_IRQ_MODEM);
+
+	/* Make sure the wifi module can wake us up*/
+	set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
+	rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
+			"ar6000", NULL);
+
+	if (rc < 0)
+		printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
+	enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
+
+	pm_power_off = gta02_poweroff;
+
+	/* Register the HDQ and vibrator as children of pwm device */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+	gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
+	platform_device_register(&gta02_hdq_device);
+#endif
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+	gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; 
+	platform_device_register(&gta02_vibrator_dev);
+#endif
+}
+
+void DEBUG_LED(int n)
+{
+	switch (n) {
+	case 0:
+		gta02_gpb_setpin(GTA02_GPIO_PWR_LED1, 1);
+		break;
+	case 1:
+		gta02_gpb_setpin(GTA02_GPIO_PWR_LED2, 1);
+		break;
+	default:
+		gta02_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(DEBUG_LED);
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= gta02_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= gta02_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Kconfig
new file mode 100644
index 0000000..a422cb0
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Kconfig
@@ -0,0 +1,31 @@
+config AR6000_WLAN
+        tristate "AR6000 wireless networking over SDIO"
+	depends on MMC
+        select WIRELESS_EXT
+        default m
+        help
+          good luck.
+
+config AR6000_WLAN_DEBUG
+	bool "Enable retrieval of firmware debugging information"
+	depends on AR6000_WLAN
+	default n
+	help
+	  The AR6k firmware maintains a log of debugging events that
+	  gets flushed to the host on various occasions. Retrieval of
+	  this data is very slow, taking several seconds.
+
+	  If in doubt, say N.
+
+config AR6000_WLAN_RESET
+	bool "Soft-reset when shutting down"
+	depends on AR6000_WLAN
+	default n
+	help
+	  The AR6k module can be explicitly reset when shutting down
+	  the device. This adds a delay of about two seconds to suspend,
+	  module removal, and so on. Since the WLAN SDIO function is
+	  generally disabled soon thereafter anyway, this reset seems
+	  superfluous.
+
+	  If in doubt, say N.
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Makefile b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Makefile
new file mode 100644
index 0000000..f8f4431
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/Makefile
@@ -0,0 +1,38 @@
+REV ?= 2
+
+PWD := $(shell pwd)
+
+EXTRA_CFLAGS += -I$(src)/include
+
+EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\
+                -DTCMD -DUSER_KEYS \
+                -DNO_SYNC_FLUSH #\
+                -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \
+                -DBLOCK_TX_PATH_FLAG \
+		-DSDIO \
+
+EXTRA_CFLAGS += -DKERNEL_2_6
+
+obj-$(CONFIG_AR6000_WLAN) += ar6000.o
+
+ar6000-objs += htc/ar6k.o      		   \
+	       htc/ar6k_events.o 	   \
+               htc/htc_send.o       	   \
+               htc/htc_recv.o       	   \
+               htc/htc_services.o          \
+               htc/htc.o     		   \
+               hif/hif2.o     		   \
+               bmi/bmi.o                   \
+               ar6000/ar6000_drv.o         \
+               ar6000/ar6000_raw_if.o	   \
+               ar6000/netbuf.o		   \
+               ar6000/wireless_ext.o	   \
+               ar6000/ioctl.o		   \
+               miscdrv/common_drv.o	   \
+               miscdrv/credit_dist.o	   \
+               wmi/wmi.o                   \
+               wlan/wlan_node.o            \
+               wlan/wlan_recv_beacon.o     \
+               wlan/wlan_utils.o
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.c
new file mode 100644
index 0000000..b790670
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.c
@@ -0,0 +1,3128 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This driver is a pseudo ethernet driver to access the Atheros AR6000
+ * WLAN Device
+ */
+static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $";
+
+#include "ar6000_drv.h"
+#include "htc.h"
+
+MODULE_LICENSE("GPL and additional rights");
+
+#ifndef REORG_APTC_HEURISTICS
+#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#endif /* REORG_APTC_HEURISTICS */
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#define APTC_TRAFFIC_SAMPLING_INTERVAL     100  /* msec */
+#define APTC_UPPER_THROUGHPUT_THRESHOLD    3000 /* Kbps */
+#define APTC_LOWER_THROUGHPUT_THRESHOLD    2000 /* Kbps */
+
+typedef struct aptc_traffic_record {
+    A_BOOL timerScheduled;
+    struct timeval samplingTS;
+    unsigned long bytesReceived;
+    unsigned long bytesTransmitted;
+} APTC_TRAFFIC_RECORD;
+
+A_TIMER aptcTimer;
+APTC_TRAFFIC_RECORD aptcTR;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+int bmienable = 0;
+unsigned int bypasswmi = 0;
+unsigned int debuglevel = 0;
+int tspecCompliance = 1;
+unsigned int busspeedlow = 0;
+unsigned int onebitmode = 0;
+unsigned int skipflash = 0;
+unsigned int wmitimeout = 2;
+unsigned int wlanNodeCaching = 1;
+unsigned int enableuartprint = 0;
+unsigned int logWmiRawMsgs = 0;
+unsigned int enabletimerwar = 0;
+unsigned int mbox_yield_limit = 99;
+int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
+int allow_trace_signal = 0;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+unsigned int testmode =0;
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(bmienable, int, 0644);
+module_param(bypasswmi, int, 0644);
+module_param(debuglevel, int, 0644);
+module_param(tspecCompliance, int, 0644);
+module_param(onebitmode, int, 0644);
+module_param(busspeedlow, int, 0644);
+module_param(skipflash, int, 0644);
+module_param(wmitimeout, int, 0644);
+module_param(wlanNodeCaching, int, 0644);
+module_param(logWmiRawMsgs, int, 0644);
+module_param(enableuartprint, int, 0644);
+module_param(enabletimerwar, int, 0644);
+module_param(mbox_yield_limit, int, 0644);
+module_param(reduce_credit_dribble, int, 0644);
+module_param(allow_trace_signal, int, 0644);
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+module_param(testmode, int, 0644);
+#endif
+#else
+
+#define __user
+/* for linux 2.4 and lower */
+MODULE_PARM(bmienable,"i");
+MODULE_PARM(bypasswmi,"i");
+MODULE_PARM(debuglevel, "i");
+MODULE_PARM(onebitmode,"i");
+MODULE_PARM(busspeedlow, "i");
+MODULE_PARM(skipflash, "i");
+MODULE_PARM(wmitimeout, "i");
+MODULE_PARM(wlanNodeCaching, "i");
+MODULE_PARM(enableuartprint,"i");
+MODULE_PARM(logWmiRawMsgs, "i");
+MODULE_PARM(enabletimerwar,"i");
+MODULE_PARM(mbox_yield_limit,"i");
+MODULE_PARM(reduce_credit_dribble,"i");
+MODULE_PARM(allow_trace_signal,"i");
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+MODULE_PARM(testmode, "i");
+#endif
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+/* in 2.6.10 and later this is now a pointer to a uint */
+unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
+#define mboxnum &_mboxnum
+#else
+unsigned int mboxnum = HTC_MAILBOX_NUM_MAX;
+#endif
+
+#ifdef CONFIG_AR6000_WLAN_RESET
+unsigned int resetok = 1;
+#else
+unsigned int resetok = 0;
+#endif
+
+#ifdef DEBUG
+A_UINT32 g_dbg_flags = DBG_DEFAULTS;
+unsigned int debugflags = 0;
+int debugdriver = 1;
+unsigned int debughtc = 128;
+unsigned int debugbmi = 1;
+unsigned int debughif = 2;
+unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(debugflags, int, 0644);
+module_param(debugdriver, int, 0644);
+module_param(debughtc, int, 0644);
+module_param(debugbmi, int, 0644);
+module_param(debughif, int, 0644);
+module_param(resetok, int, 0644);
+module_param_array(txcreditsavailable, int, mboxnum, 0644);
+module_param_array(txcreditsconsumed, int, mboxnum, 0644);
+module_param_array(txcreditintrenable, int, mboxnum, 0644);
+module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644);
+#else
+/* linux 2.4 and lower */
+MODULE_PARM(debugflags,"i");
+MODULE_PARM(debugdriver, "i");
+MODULE_PARM(debughtc, "i");
+MODULE_PARM(debugbmi, "i");
+MODULE_PARM(debughif, "i");
+MODULE_PARM(resetok, "i");
+MODULE_PARM(txcreditsavailable, "0-3i");
+MODULE_PARM(txcreditsconsumed, "0-3i");
+MODULE_PARM(txcreditintrenable, "0-3i");
+MODULE_PARM(txcreditintrenableaggregate, "0-3i");
+#endif
+
+#endif /* DEBUG */
+
+unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int hifBusRequestNumMax = 40;
+unsigned int war23838_disabled = 0;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+unsigned int enableAPTCHeuristics = 1;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param_array(tx_attempt, int, mboxnum, 0644);
+module_param_array(tx_post, int, mboxnum, 0644);
+module_param_array(tx_complete, int, mboxnum, 0644);
+module_param(hifBusRequestNumMax, int, 0644);
+module_param(war23838_disabled, int, 0644);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+module_param(enableAPTCHeuristics, int, 0644);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#else
+MODULE_PARM(tx_attempt, "0-3i");
+MODULE_PARM(tx_post, "0-3i");
+MODULE_PARM(tx_complete, "0-3i");
+MODULE_PARM(hifBusRequestNumMax, "i");
+MODULE_PARM(war23838_disabled, "i");
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+MODULE_PARM(enableAPTCHeuristics, "i");
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#endif
+
+#ifdef BLOCK_TX_PATH_FLAG
+int blocktx = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(blocktx, int, 0644);
+#else
+MODULE_PARM(blocktx, "i");
+#endif
+#endif /* BLOCK_TX_PATH_FLAG */
+
+// TODO move to arsoft_c
+USER_RSSI_THOLD rssi_map[12];
+
+int reconnect_flag = 0;
+
+DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue);
+
+/* Function declarations */
+static int ar6000_init_module(void);
+static void ar6000_cleanup_module(void);
+
+int ar6000_init(struct net_device *dev);
+static int ar6000_open(struct net_device *dev);
+static int ar6000_close(struct net_device *dev);
+static void ar6000_init_control_info(AR_SOFTC_T *ar);
+static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
+
+static void ar6000_destroy(struct net_device *dev, unsigned int unregister);
+static void ar6000_detect_error(unsigned long ptr);
+static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
+static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
+
+/*
+ * HTC service connection handlers
+ */
+static void ar6000_avail_ev(HTC_HANDLE HTCHandle);
+
+static void ar6000_unavail_ev(void *Instance);
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status);
+
+static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+/*
+ * Static variables
+ */
+
+static struct net_device *ar6000_devices[MAX_AR6000];
+extern struct iw_handler_def ath_iw_handler_def;
+DECLARE_WAIT_QUEUE_HEAD(arEvent);
+static void ar6000_cookie_init(AR_SOFTC_T *ar);
+static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
+static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
+static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar);
+
+#ifdef USER_KEYS
+static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
+#endif
+
+
+static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
+
+#define HOST_INTEREST_ITEM_ADDRESS(ar, item)    \
+((ar->arTargetType == TARGET_TYPE_AR6001) ?     \
+   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
+   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Debug log support */
+
+/*
+ * Flag to govern whether the debug logs should be parsed in the kernel
+ * or reported to the application.
+ */
+#ifdef DEBUG
+#define REPORT_DEBUG_LOGS_TO_APP
+#endif
+
+A_STATUS
+ar6000_set_host_app_area(AR_SOFTC_T *ar)
+{
+    A_UINT32 address, data;
+    struct host_app_area_s host_app_area;
+
+    /* Fetch the address of the host_app_area_s instance in the host interest area */
+    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest);
+    if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
+        return A_ERROR;
+    }
+    address = data;
+    host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
+    if (ar6000_WriteDataDiag(ar->arHifDevice, address,
+                             (A_UCHAR *)&host_app_area,
+                             sizeof(struct host_app_area_s)) != A_OK)
+    {
+        return A_ERROR;
+    }
+
+    return A_OK;
+}
+
+A_UINT32
+dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
+{
+    A_UINT32 param;
+    A_UINT32 address;
+    A_STATUS status;
+
+    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr);
+    if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                      (A_UCHAR *)&param, 4)) != A_OK)
+    {
+        param = 0;
+    }
+
+    return param;
+}
+
+/*
+ * The dbglog module has been initialized. Its ok to access the relevant
+ * data stuctures over the diagnostic window.
+ */
+void
+ar6000_dbglog_init_done(AR_SOFTC_T *ar)
+{
+    ar->dbglog_init_done = TRUE;
+}
+
+A_UINT32
+dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
+{
+    A_INT32 *buffer;
+    A_UINT32 count;
+    A_UINT32 numargs;
+    A_UINT32 length;
+    A_UINT32 fraglen;
+
+    count = fraglen = 0;
+    buffer = (A_INT32 *)datap;
+    length = (limit >> 2);
+
+    if (len <= limit) {
+        fraglen = len;
+    } else {
+        while (count < length) {
+            numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+            fraglen = (count << 2);
+            count += numargs + 1;
+        }
+    }
+
+    return fraglen;
+}
+
+void
+dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
+{
+    A_INT32 *buffer;
+    A_UINT32 count;
+    A_UINT32 timestamp;
+    A_UINT32 debugid;
+    A_UINT32 moduleid;
+    A_UINT32 numargs;
+    A_UINT32 length;
+
+    count = 0;
+    buffer = (A_INT32 *)datap;
+    length = (len >> 2);
+    while (count < length) {
+        debugid = DBGLOG_GET_DBGID(buffer[count]);
+        moduleid = DBGLOG_GET_MODULEID(buffer[count]);
+        numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+        timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
+        switch (numargs) {
+            case 0:
+            AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp);
+            break;
+
+            case 1:
+            AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid,
+                            timestamp, buffer[count+1]);
+            break;
+
+            case 2:
+            AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
+                            timestamp, buffer[count+1], buffer[count+2]);
+            break;
+
+            default:
+            AR_DEBUG_PRINTF("Invalid args: %d\n", numargs);
+        }
+        count += numargs + 1;
+    }
+}
+
+int
+ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
+{
+    struct dbglog_hdr_s debug_hdr;
+    struct dbglog_buf_s debug_buf;
+    A_UINT32 address;
+    A_UINT32 length;
+    A_UINT32 dropped;
+    A_UINT32 firstbuf;
+    A_UINT32 debug_hdr_ptr;
+
+    if (!ar->dbglog_init_done) return A_ERROR;
+
+#ifndef CONFIG_AR6000_WLAN_DEBUG
+    return 0;
+#endif
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (ar->dbgLogFetchInProgress) {
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        return A_EBUSY;
+    }
+
+        /* block out others */
+    ar->dbgLogFetchInProgress = TRUE;
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
+    printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
+
+    /* Get the contents of the ring buffer */
+    if (debug_hdr_ptr) {
+        address = debug_hdr_ptr;
+        length = sizeof(struct dbglog_hdr_s);
+        ar6000_ReadDataDiag(ar->arHifDevice, address,
+                            (A_UCHAR *)&debug_hdr, length);
+        address = (A_UINT32)debug_hdr.dbuf;
+        firstbuf = address;
+        dropped = debug_hdr.dropped;
+        length = sizeof(struct dbglog_buf_s);
+        ar6000_ReadDataDiag(ar->arHifDevice, address,
+                            (A_UCHAR *)&debug_buf, length);
+
+        do {
+            address = (A_UINT32)debug_buf.buffer;
+            length = debug_buf.length;
+            if ((length) && (debug_buf.length <= debug_buf.bufsize)) {
+                /* Rewind the index if it is about to overrun the buffer */
+                if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
+                    ar->log_cnt = 0;
+                }
+                if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                    (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
+                {
+                    break;
+                }
+                ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length);
+                ar->log_cnt += length;
+            } else {
+                AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n",
+                                debug_buf.length, debug_buf.bufsize);
+            }
+
+            address = (A_UINT32)debug_buf.next;
+            length = sizeof(struct dbglog_buf_s);
+            if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                (A_UCHAR *)&debug_buf, length))
+            {
+                break;
+            }
+
+        } while (address != firstbuf);
+    }
+
+    ar->dbgLogFetchInProgress = FALSE;
+
+    return A_OK;
+}
+
+void
+ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
+                    A_INT8 *buffer, A_UINT32 length)
+{
+#ifdef REPORT_DEBUG_LOGS_TO_APP
+    #define MAX_WIRELESS_EVENT_SIZE 252
+    /*
+     * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
+     * There seems to be a limitation on the length of message that could be
+     * transmitted to the user app via this mechanism.
+     */
+    A_UINT32 send, sent;
+
+    sent = 0;
+    send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+                                     MAX_WIRELESS_EVENT_SIZE);
+    while (send) {
+        ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send);
+        sent += send;
+        send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+                                         MAX_WIRELESS_EVENT_SIZE);
+    }
+#else
+    AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n",
+                    dropped, length);
+
+    /* Interpret the debug logs */
+    dbglog_parse_debug_logs(buffer, length);
+#endif /* REPORT_DEBUG_LOGS_TO_APP */
+}
+
+
+
+static int __init
+ar6000_init_module(void)
+{
+    static int probed = 0;
+    A_STATUS status;
+    HTC_INIT_INFO initInfo;
+
+    A_MEMZERO(&initInfo,sizeof(initInfo));
+    initInfo.AddInstance = ar6000_avail_ev;
+    initInfo.DeleteInstance = ar6000_unavail_ev;
+    initInfo.TargetFailure = ar6000_target_failure;
+
+
+#ifdef DEBUG
+    /* Set the debug flags if specified at load time */
+    if(debugflags != 0)
+    {
+        g_dbg_flags = debugflags;
+    }
+#endif
+
+    if (probed) {
+        return -ENODEV;
+    }
+    probed++;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+    ar6000_gpio_init();
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+    status = HTCInit(&initInfo);
+    if(status != A_OK)
+        return -ENODEV;
+
+    return 0;
+}
+
+static void __exit
+ar6000_cleanup_module(void)
+{
+    int i = 0;
+    struct net_device *ar6000_netdev;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    /* Delete the Adaptive Power Control timer */
+    if (timer_pending(&aptcTimer)) {
+        del_timer_sync(&aptcTimer);
+    }
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+    for (i=0; i < MAX_AR6000; i++) {
+        if (ar6000_devices[i] != NULL) {
+            ar6000_netdev = ar6000_devices[i];
+            ar6000_devices[i] = NULL;
+            ar6000_destroy(ar6000_netdev, 1);
+        }
+    }
+
+        /* shutting down HTC will cause the HIF layer to detach from the
+         * underlying bus driver which will cause the subsequent deletion of
+         * all HIF and HTC instances */
+    HTCShutDown();
+
+    AR_DEBUG_PRINTF("ar6000_cleanup: success\n");
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+void
+aptcTimerHandler(unsigned long arg)
+{
+    A_UINT32 numbytes;
+    A_UINT32 throughput;
+    AR_SOFTC_T *ar;
+    A_STATUS status;
+
+    ar = (AR_SOFTC_T *)arg;
+    A_ASSERT(ar != NULL);
+    A_ASSERT(!timer_pending(&aptcTimer));
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    /* Get the number of bytes transferred */
+    numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+    aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+
+    /* Calculate and decide based on throughput thresholds */
+    throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
+    if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
+        /* Enable Sleep and delete the timer */
+        A_ASSERT(ar->arWmiReady == TRUE);
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
+        AR6000_SPIN_LOCK(&ar->arLock, 0);
+        A_ASSERT(status == A_OK);
+        aptcTR.timerScheduled = FALSE;
+    } else {
+        A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+
+
+/* set HTC block size, assume BMI is already initialized */
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar)
+{
+    A_STATUS status;
+    A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX];
+
+    do {
+            /* get the block sizes */
+        status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    blocksizes, sizeof(blocksizes));
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n");
+            break;
+        }
+            /* note: we actually get the block size for mailbox 1, for SDIO the block
+             * size on mailbox 0 is artificially set to 1 */
+            /* must be a power of 2 */
+        A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0);
+
+            /* set the host interest area for the block size */
+        status = BMIWriteMemory(ar->arHifDevice,
+                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz),
+                                (A_UCHAR *)&blocksizes[1],
+                                4);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n");
+            break;
+        }
+
+        AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n",
+                blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz));
+
+            /* set the host interest area for the mbox ISR yield limit */
+        status = BMIWriteMemory(ar->arHifDevice,
+                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit),
+                                (A_UCHAR *)&mbox_yield_limit,
+                                4);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n");
+            break;
+        }
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void free_raw_buffers(AR_SOFTC_T *ar)
+{
+    int i, j;
+
+    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++)
+	    kfree(ar->raw_htc_read_buffer[i][j]);
+	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++)
+	    kfree(ar->raw_htc_write_buffer[i][j]);
+    }
+}
+
+static int alloc_raw_buffers(AR_SOFTC_T *ar)
+{
+    int i, j;
+    raw_htc_buffer *b;
+
+    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) {
+	    b = kzalloc(sizeof(*b), GFP_KERNEL);
+	    if (!b)
+		return -ENOMEM;
+	    ar->raw_htc_read_buffer[i][j] = b;
+	}
+	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) {
+	    b = kzalloc(sizeof(*b), GFP_KERNEL);
+	    if (!b)
+		return -ENOMEM;
+	    ar->raw_htc_write_buffer[i][j] = b;
+	}
+    }
+    return 0;
+}
+
+/*
+ * HTC Event handlers
+ */
+static void
+ar6000_avail_ev(HTC_HANDLE HTCHandle)
+{
+    int i;
+    struct net_device *dev;
+    AR_SOFTC_T *ar;
+    int device_index = 0;
+
+    AR_DEBUG_PRINTF("ar6000_available\n");
+
+    for (i=0; i < MAX_AR6000; i++) {
+        if (ar6000_devices[i] == NULL) {
+            break;
+        }
+    }
+
+    if (i == MAX_AR6000) {
+        AR_DEBUG_PRINTF("ar6000_available: max devices reached\n");
+        return;
+    }
+
+    /* Save this. It gives a bit better readability especially since */
+    /* we use another local "i" variable below.                      */
+    device_index = i;
+
+    A_ASSERT(HTCHandle != NULL);
+
+    dev = alloc_etherdev(sizeof(AR_SOFTC_T));
+    if (dev == NULL) {
+        AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n");
+        return;
+    }
+
+    ether_setup(dev);
+
+    if (netdev_priv(dev) == NULL) {
+        printk(KERN_CRIT "ar6000_available: Could not allocate memory\n");
+        return;
+    }
+
+    A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T));
+
+    ar                       = (AR_SOFTC_T *)netdev_priv(dev);
+    ar->arNetDev             = dev;
+    ar->arHtcTarget          = HTCHandle;
+    ar->arHifDevice          = HTCGetHifDevice(HTCHandle);
+    ar->arWlanState          = WLAN_ENABLED;
+    ar->arRadioSwitch        = WLAN_ENABLED;
+    ar->arDeviceIndex        = device_index;
+
+    A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
+    ar->arHBChallengeResp.seqNum = 0;
+    ar->arHBChallengeResp.outstanding = FALSE;
+    ar->arHBChallengeResp.missCnt = 0;
+    ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
+    ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
+
+    ar6000_init_control_info(ar);
+    init_waitqueue_head(&arEvent);
+    sema_init(&ar->arSem, 1);
+
+    if (alloc_raw_buffers(ar)) {
+	free_raw_buffers(ar);
+	/*
+	 * @@@ Clean up our own mess, but for anything else, cheerfully mimick
+	 * the beautiful error non-handling of the rest of this function.
+	 */
+	return;
+    }
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+    /*
+     * If requested, perform some magic which requires no cooperation from
+     * the Target.  It causes the Target to ignore flash and execute to the
+     * OS from ROM.
+     *
+     * This is intended to support recovery from a corrupted flash on Targets
+     * that support flash.
+     */
+    if (skipflash)
+    {
+        ar6000_reset_device_skipflash(ar->arHifDevice);
+            }
+
+    BMIInit();
+    {
+        struct bmi_target_info targ_info;
+
+        if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
+            return;
+        }
+
+        ar->arVersion.target_ver = targ_info.target_ver;
+        ar->arTargetType = targ_info.target_type;
+    }
+
+    if (enableuartprint) {
+        A_UINT32 param;
+        param = 1;
+        if (BMIWriteMemory(ar->arHifDevice,
+                           HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
+                           (A_UCHAR *)&param,
+                           4)!= A_OK)
+        {
+             AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n");
+             return ;
+        }
+        AR_DEBUG_PRINTF("Serial console prints enabled\n");
+    }
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    if(testmode) {
+        ar->arTargetMode = AR6000_TCMD_MODE;
+    }else {
+        ar->arTargetMode = AR6000_WLAN_MODE;
+    }
+#endif
+    if (enabletimerwar) {
+        A_UINT32 param;
+
+        if (BMIReadMemory(ar->arHifDevice,
+            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+            (A_UCHAR *)&param,
+            4)!= A_OK)
+        {
+            AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n");
+            return;
+        }
+
+        param |= HI_OPTION_TIMER_WAR;
+
+        if (BMIWriteMemory(ar->arHifDevice,
+            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+            (A_UCHAR *)&param,
+            4) != A_OK)
+        {
+            AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n");
+            return;
+        }
+        AR_DEBUG_PRINTF("Timer WAR enabled\n");
+    }
+
+
+        /* since BMIInit is called in the driver layer, we have to set the block
+         * size here for the target */
+
+    if (A_FAILED(ar6000_SetHTCBlockSize(ar))) {
+        return;
+    }
+
+    spin_lock_init(&ar->arLock);
+
+    /* Don't install the init function if BMI is requested */
+    if(!bmienable)
+    {
+        dev->init = ar6000_init;
+    } else {
+        AR_DEBUG_PRINTF(" BMI enabled \n");
+    }
+
+    dev->open = &ar6000_open;
+    dev->stop = &ar6000_close;
+    dev->hard_start_xmit = &ar6000_data_tx;
+    dev->get_stats = &ar6000_get_stats;
+
+    /* dev->tx_timeout = ar6000_tx_timeout; */
+    dev->do_ioctl = &ar6000_ioctl;
+    dev->watchdog_timeo = AR6000_TX_TIMEOUT;
+    ar6000_ioctl_iwsetup(&ath_iw_handler_def);
+    dev->wireless_handlers = &ath_iw_handler_def;
+    ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
+
+    /*
+     * We need the OS to provide us with more headroom in order to
+     * perform dix to 802.3, WMI header encap, and the HTC header
+     */
+    dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
+        sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN;
+
+    /* This runs the init function */
+    SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice));
+    if (register_netdev(dev)) {
+        AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n");
+        ar6000_destroy(dev, 0);
+        return;
+    }
+
+    HTCSetInstance(ar->arHtcTarget, ar);
+
+    /* We only register the device in the global list if we succeed. */
+    /* If the device is in the global list, it will be destroyed     */
+    /* when the module is unloaded.                                  */
+    ar6000_devices[device_index] = dev;
+
+    AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n",
+                    dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index,
+                    (A_UINT32)ar);
+}
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+    static A_BOOL sip = FALSE;
+
+    if (Status != A_OK) {
+        if (timer_pending(&ar->arHBChallengeResp.timer)) {
+            A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+        }
+
+        /* try dumping target assertion information (if any) */
+        ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
+
+        /*
+         * Fetch the logs from the target via the diagnostic
+         * window.
+         */
+        ar6000_dbglog_get_debug_logs(ar);
+
+        /* Report the error only once */
+        if (!sip) {
+            sip = TRUE;
+            errEvent.errorVal = WMI_TARGET_COM_ERR |
+                                WMI_TARGET_FATAL_ERR;
+#ifdef SEND_EVENT_TO_APP
+            ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+                                     (A_UINT8 *)&errEvent,
+                                     sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+        }
+    }
+}
+
+static void
+ar6000_unavail_ev(void *Instance)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+        /* NULL out it's entry in the global list */
+    ar6000_devices[ar->arDeviceIndex] = NULL;
+    ar6000_destroy(ar->arNetDev, 1);
+}
+
+/*
+ * We need to differentiate between the surprise and planned removal of the
+ * device because of the following consideration:
+ * - In case of surprise removal, the hcd already frees up the pending
+ *   for the device and hence there is no need to unregister the function
+ *   driver inorder to get these requests. For planned removal, the function
+ *   driver has to explictly unregister itself to have the hcd return all the
+ *   pending requests before the data structures for the devices are freed up.
+ *   Note that as per the current implementation, the function driver will
+ *   end up releasing all the devices since there is no API to selectively
+ *   release a particular device.
+ * - Certain commands issued to the target can be skipped for surprise
+ *   removal since they will anyway not go through.
+ */
+static void
+ar6000_destroy(struct net_device *dev, unsigned int unregister)
+{
+    AR_SOFTC_T *ar;
+
+    AR_DEBUG_PRINTF("+ar6000_destroy \n");
+
+    if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL))
+    {
+        AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__);
+        return;
+    }
+
+    /* Clear the tx counters */
+    memset(tx_attempt, 0, sizeof(tx_attempt));
+    memset(tx_post, 0, sizeof(tx_post));
+    memset(tx_complete, 0, sizeof(tx_complete));
+
+    /* Free up the device data structure */
+    if (unregister) {
+	unregister_netdev(dev);
+    } else {
+	ar6000_close(dev);
+    }
+
+    free_raw_buffers(ar);
+
+#ifndef free_netdev
+    kfree(dev);
+#else
+    free_netdev(dev);
+#endif
+
+    AR_DEBUG_PRINTF("-ar6000_destroy \n");
+}
+
+static void ar6000_detect_error(unsigned long ptr)
+{
+    struct net_device *dev = (struct net_device *)ptr;
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (ar->arHBChallengeResp.outstanding) {
+        ar->arHBChallengeResp.missCnt++;
+    } else {
+        ar->arHBChallengeResp.missCnt = 0;
+    }
+
+    if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
+        /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
+        ar->arHBChallengeResp.missCnt = 0;
+        ar->arHBChallengeResp.seqNum = 0;
+        errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+#ifdef SEND_EVENT_TO_APP
+        ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+                                 (A_UINT8 *)&errEvent,
+                                 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+        return;
+    }
+
+    /* Generate the sequence number for the next challenge */
+    ar->arHBChallengeResp.seqNum++;
+    ar->arHBChallengeResp.outstanding = TRUE;
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    /* Send the challenge on the control channel */
+    if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
+        AR_DEBUG_PRINTF("Unable to send heart beat challenge\n");
+    }
+
+
+    /* Reschedule the timer for the next challenge */
+    A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+}
+
+void ar6000_init_profile_info(AR_SOFTC_T *ar)
+{
+    ar->arSsidLen            = 0;
+    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+    ar->arNetworkType        = INFRA_NETWORK;
+    ar->arDot11AuthMode      = OPEN_AUTH;
+    ar->arAuthMode           = NONE_AUTH;
+    ar->arPairwiseCrypto     = NONE_CRYPT;
+    ar->arPairwiseCryptoLen  = 0;
+    ar->arGroupCrypto        = NONE_CRYPT;
+    ar->arGroupCryptoLen     = 0;
+    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+    ar->arBssChannel = 0;
+}
+
+static void
+ar6000_init_control_info(AR_SOFTC_T *ar)
+{
+    ar->arWmiEnabled         = FALSE;
+    ar6000_init_profile_info(ar);
+    ar->arDefTxKeyIndex      = 0;
+    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+    ar->arChannelHint        = 0;
+    ar->arListenInterval     = MAX_LISTEN_INTERVAL;
+    ar->arVersion.host_ver   = AR6K_SW_VERSION;
+    ar->arRssi               = 0;
+    ar->arTxPwr              = 0;
+    ar->arTxPwrSet           = FALSE;
+    ar->arSkipScan           = 0;
+    ar->arBeaconInterval     = 0;
+    ar->arBitRate            = 0;
+    ar->arMaxRetries         = 0;
+    ar->arWmmEnabled         = TRUE;
+}
+
+static int
+ar6000_open(struct net_device *dev)
+{
+    /* Wake up the queues */
+    netif_start_queue(dev);
+
+    return 0;
+}
+
+static int
+ar6000_close(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = netdev_priv(dev);
+
+    /* Stop the transmit queues */
+    netif_stop_queue(dev);
+
+    /* Disable the target and the interrupts associated with it */
+    if (ar->arWmiReady == TRUE)
+    {
+        if (!bypasswmi)
+        {
+            if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
+            {
+                AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__);
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar6000_init_profile_info(ar);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                wmi_disconnect_cmd(ar->arWmi);
+            }
+
+            ar6000_dbglog_get_debug_logs(ar);
+            ar->arWmiReady  = FALSE;
+            ar->arConnected = FALSE;
+            ar->arConnectPending = FALSE;
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+            ar->arWlanState = WLAN_ENABLED;
+#ifdef USER_KEYS
+            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+            ar->user_key_ctrl      = 0;
+#endif
+        }
+
+         AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__);
+    }
+    else
+    {
+        AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n",
+            __func__, (unsigned int) ar, (unsigned int) ar->arWmi);
+
+        /* Shut down WMI if we have started it */
+        if(ar->arWmiEnabled == TRUE)
+        {
+            AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__);
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+        }
+    }
+
+    /* stop HTC */
+    HTCStop(ar->arHtcTarget);
+
+    /* set the instance to NULL so we do not get called back on remove incase we
+     * we're explicity destroyed by module unload */
+    HTCSetInstance(ar->arHtcTarget, NULL);
+
+    if (resetok) {
+        /* try to reset the device if we can
+         * The driver may have been configure NOT to reset the target during
+         * a debug session */
+        AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n");
+        ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+    } else {
+        AR_DEBUG_PRINTF(" Host does not want target reset. \n");
+    }
+
+       /* Done with cookies */
+    ar6000_cookie_cleanup(ar);
+
+    /* Cleanup BMI */
+    BMIInit();
+
+    return 0;
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connectservice(AR_SOFTC_T               *ar,
+                                      HTC_SERVICE_CONNECT_REQ  *pConnect,
+                                      WMI_PRI_STREAM_ID        WmiStreamID,
+                                      char                     *pDesc)
+{
+    A_STATUS                 status;
+    HTC_SERVICE_CONNECT_RESP response;
+
+    do {
+
+        A_MEMZERO(&response,sizeof(response));
+
+        status = HTCConnectService(ar->arHtcTarget,
+                                   pConnect,
+                                   &response);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status);
+            break;
+        }
+
+        if (WmiStreamID == WMI_NOT_MAPPED) {
+                /* done */
+            break;
+        }
+
+            /* set endpoint mapping for the WMI stream in the driver layer */
+        arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint);
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
+{
+        /* flush all the data (non-control) streams
+         * we only flush packets that are tagged as data, we leave any control packets that
+         * were in the TX queues alone */
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_LOW_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_HIGH_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI),
+                     AR6K_DATA_PKT_TAG);
+}
+
+/* This function does one time initialization for the lifetime of the device */
+int ar6000_init(struct net_device *dev)
+{
+    AR_SOFTC_T *ar;
+    A_STATUS    status;
+    A_INT32     timeleft;
+
+    if((ar = netdev_priv(dev)) == NULL)
+    {
+        return(-EIO);
+    }
+
+    /* Do we need to finish the BMI phase */
+    if(BMIDone(ar->arHifDevice) != A_OK)
+    {
+        return -EIO;
+    }
+
+    if (!bypasswmi)
+    {
+#if 0 /* TBDXXX */
+        if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
+            A_PRINTF("WARNING: Host version 0x%x does not match Target "
+                    " version 0x%x!\n",
+                    ar->arVersion.host_ver, ar->arVersion.target_ver);
+        }
+#endif
+
+        /* Indicate that WMI is enabled (although not ready yet) */
+        ar->arWmiEnabled = TRUE;
+        if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
+        {
+            AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__);
+            return(-EIO);
+        }
+
+        AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__,
+            (unsigned int) ar->arWmi);
+    }
+
+    do {
+        HTC_SERVICE_CONNECT_REQ connect;
+
+            /* the reason we have to wait for the target here is that the driver layer
+             * has to init BMI in order to set the host block size,
+             */
+        status = HTCWaitTarget(ar->arHtcTarget);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        A_MEMZERO(&connect,sizeof(connect));
+            /* meta data is unused for now */
+        connect.pMetaData = NULL;
+        connect.MetaDataLength = 0;
+            /* these fields are the same for all service endpoints */
+        connect.EpCallbacks.pContext = ar;
+        connect.EpCallbacks.EpTxComplete = ar6000_tx_complete;
+        connect.EpCallbacks.EpRecv = ar6000_rx;
+        connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
+        connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
+        connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail;
+            /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
+             * Linux has the peculiarity of not providing flow control between the
+             * NIC and the network stack. There is no API to indicate that a TX packet
+             * was sent which could provide some back pressure to the network stack.
+             * Under linux you would have to wait till the network stack consumed all sk_buffs
+             * before any back-flow kicked in. Which isn't very friendly.
+             * So we have to manage this ourselves */
+        connect.MaxSendQueueDepth = 32;
+
+            /* connect to control service */
+        connect.ServiceID = WMI_CONTROL_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_CONTROL_PRI,
+                                       "WMI CONTROL");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* for the remaining data services set the connection flag to reduce dribbling,
+             * if configured to do so */
+        if (reduce_credit_dribble) {
+            connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
+            /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
+             * of 0-3 */
+            connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+            connect.ConnectionFlags |=
+                        ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+        }
+            /* connect to best-effort service */
+        connect.ServiceID = WMI_DATA_BE_SVC;
+
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_BEST_EFFORT_PRI,
+                                       "WMI DATA BE");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to back-ground
+             * map this to WMI LOW_PRI */
+        connect.ServiceID = WMI_DATA_BK_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_LOW_PRI,
+                                       "WMI DATA BK");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to Video service, map this to
+             * to HI PRI */
+        connect.ServiceID = WMI_DATA_VI_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_HIGH_PRI,
+                                       "WMI DATA VI");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to VO service, this is currently not
+             * mapped to a WMI priority stream due to historical reasons.
+             * WMI originally defined 3 priorities over 3 mailboxes
+             * We can change this when WMI is reworked so that priorities are not
+             * dependent on mailboxes */
+        connect.ServiceID = WMI_DATA_VO_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_HIGHEST_PRI,
+                                       "WMI DATA VO");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0);
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        return (-EIO);
+    }
+
+    /*
+     * give our connected endpoints some buffers
+     */
+    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI));
+
+    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI));
+
+    /*
+     * We will post the receive buffers only for SPE testing and so we are
+     * making it conditional on the 'bypasswmi' flag.
+     */
+    if (bypasswmi) {
+        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI));
+        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI));
+    }
+
+        /* setup credit distribution */
+    ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
+
+    /* Since cookies are used for HTC transports, they should be */
+    /* initialized prior to enabling HTC.                        */
+    ar6000_cookie_init(ar);
+
+    /* start HTC */
+    status = HTCStart(ar->arHtcTarget);
+
+    if (status != A_OK) {
+        if (ar->arWmiEnabled == TRUE) {
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+        }
+        ar6000_cookie_cleanup(ar);
+        return -EIO;
+    }
+
+    if (!bypasswmi) {
+        /* Wait for Wmi event to be ready */
+        timeleft = wait_event_interruptible_timeout(arEvent,
+            (ar->arWmiReady == TRUE), wmitimeout * HZ);
+
+        if(!timeleft || signal_pending(current))
+        {
+            AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n");
+#if defined(DWSIM) /* TBDXXX */
+            AR_DEBUG_PRINTF(".....but proceed anyway.\n");
+#else
+            return -EIO;
+#endif
+        }
+
+        AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__);
+
+        /* Communicate the wmi protocol verision to the target */
+        if ((ar6000_set_host_app_area(ar)) != A_OK) {
+            AR_DEBUG_PRINTF("Unable to set the host app area\n");
+        }
+    }
+
+    ar->arNumDataEndPts = 1;
+
+    return(0);
+}
+
+
+void
+ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arBitRate = rateKbps;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_ratemask_rx(void *devt, A_UINT16 ratemask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arRateMask = ratemask;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arTxPwr = txPwr;
+    wake_up(&arEvent);
+}
+
+
+void
+ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
+    ar->arNumChannels = numChan;
+
+    wake_up(&arEvent);
+}
+
+A_UINT8
+ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
+{
+    AR_SOFTC_T      *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8         *datap;
+    ATH_MAC_HDR     *macHdr;
+    A_UINT32         i, eptMap;
+
+    (*mapNo) = 0;
+    datap = A_NETBUF_DATA(skb);
+    macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
+    if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
+        return ENDPOINT_2;
+    }
+
+    eptMap = -1;
+    for (i = 0; i < ar->arNodeNum; i ++) {
+        if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
+            (*mapNo) = i + 1;
+            ar->arNodeMap[i].txPending ++;
+            return ar->arNodeMap[i].epId;
+        }
+
+        if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
+            eptMap = i;
+        }
+    }
+
+    if (eptMap == -1) {
+        eptMap = ar->arNodeNum;
+        ar->arNodeNum ++;
+        A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
+    }
+
+    A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
+
+    for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
+        if (!ar->arTxPending[i]) {
+            ar->arNodeMap[eptMap].epId = i;
+            break;
+        }
+        // No free endpoint is available, start redistribution on the inuse endpoints.
+        if (i == ENDPOINT_5) {
+            ar->arNodeMap[eptMap].epId = ar->arNexEpId;
+            ar->arNexEpId ++;
+            if (ar->arNexEpId > ENDPOINT_5) {
+                ar->arNexEpId = ENDPOINT_2;
+            }
+        }
+    }
+
+    (*mapNo) = eptMap + 1;
+    ar->arNodeMap[eptMap].txPending ++;
+
+    return ar->arNodeMap[eptMap].epId;
+}
+
+#ifdef DEBUG
+static void ar6000_dump_skb(struct sk_buff *skb)
+{
+   u_char *ch;
+   for (ch = A_NETBUF_DATA(skb);
+        (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) +
+        A_NETBUF_LEN(skb)); ch++)
+    {
+         AR_DEBUG_PRINTF("%2.2x ", *ch);
+    }
+    AR_DEBUG_PRINTF("\n");
+}
+#endif
+
+static int
+ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
+{
+    AR_SOFTC_T        *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED;
+    A_UINT32          mapNo = 0;
+    int               len;
+    struct ar_cookie *cookie;
+    A_BOOL            checkAdHocPsMapping = FALSE;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
+    skb->list = NULL;
+#endif
+
+    AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n",
+                     (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb),
+                     A_NETBUF_LEN(skb));
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+     /* TCMD doesnt support any data, free the buf and return */
+    if(ar->arTargetMode == AR6000_TCMD_MODE) {
+        A_NETBUF_FREE(skb);
+        return 0;
+    }
+#endif
+    do {
+
+        if (ar->arWmiReady == FALSE && bypasswmi == 0) {
+            break;
+        }
+
+#ifdef BLOCK_TX_PATH_FLAG
+        if (blocktx) {
+            break;
+        }
+#endif /* BLOCK_TX_PATH_FLAG */
+
+        if (ar->arWmiEnabled) {
+            if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) {
+                struct sk_buff  *newbuf;
+                /*
+                 * We really should have gotten enough headroom but sometimes
+                 * we still get packets with not enough headroom.  Copy the packet.
+                 */
+                len = A_NETBUF_LEN(skb);
+                newbuf = A_NETBUF_ALLOC(len);
+                if (newbuf == NULL) {
+                    break;
+                }
+                A_NETBUF_PUT(newbuf, len);
+                A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
+                A_NETBUF_FREE(skb);
+                skb = newbuf;
+                /* fall through and assemble header */
+            }
+
+            if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
+                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n");
+                break;
+            }
+
+            if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) {
+                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n");
+                break;
+            }
+
+            if ((ar->arNetworkType == ADHOC_NETWORK) &&
+                ar->arIbssPsEnable && ar->arConnected) {
+                    /* flag to check adhoc mapping once we take the lock below: */
+                checkAdHocPsMapping = TRUE;
+
+            } else {
+                    /* get the stream mapping */
+                if (ar->arWmmEnabled) {
+                    streamID = wmi_get_stream_id(ar->arWmi,
+                                    wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI));
+                } else {
+                    streamID = WMI_BEST_EFFORT_PRI;
+                }
+            }
+
+        } else {
+            struct iphdr    *ipHdr;
+            /*
+             * the endpoint is directly based on the TOS field in the IP
+             * header **** only for testing ******
+             */
+            ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR);
+                /* here we map the TOS field to an endpoint number, this is for
+                 * the endpointping test application */
+            streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos);
+        }
+
+    } while (FALSE);
+
+        /* did we succeed ? */
+    if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) {
+            /* cleanup and exit */
+        A_NETBUF_FREE(skb);
+        AR6000_STAT_INC(ar, tx_dropped);
+        AR6000_STAT_INC(ar, tx_aborted_errors);
+        return 0;
+    }
+
+    cookie = NULL;
+
+        /* take the lock to protect driver data */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    do {
+
+        if (checkAdHocPsMapping) {
+            streamID = ar6000_ibss_map_epid(skb, dev, &mapNo);
+        }
+
+        A_ASSERT(streamID != WMI_NOT_MAPPED);
+
+            /* validate that the endpoint is connected */
+        if (arWMIStream2EndpointID(ar,streamID) == 0) {
+            AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID);
+            break;
+        }
+            /* allocate resource for this packet */
+        cookie = ar6000_alloc_cookie(ar);
+
+        if (cookie != NULL) {
+                /* update counts while the lock is held */
+            ar->arTxPending[streamID]++;
+            ar->arTotalTxDataPending++;
+        }
+
+    } while (FALSE);
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (cookie != NULL) {
+        cookie->arc_bp[0] = (A_UINT32)skb;
+        cookie->arc_bp[1] = mapNo;
+        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+                               cookie,
+                               A_NETBUF_DATA(skb),
+                               A_NETBUF_LEN(skb),
+                               arWMIStream2EndpointID(ar,streamID),
+                               AR6K_DATA_PKT_TAG);
+
+#ifdef DEBUG
+        if (debugdriver >= 3) {
+            ar6000_dump_skb(skb);
+        }
+#endif
+            /* HTC interface is asynchronous, if this fails, cleanup will happen in
+             * the ar6000_tx_complete callback */
+        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+    } else {
+            /* no packet to send, cleanup */
+        A_NETBUF_FREE(skb);
+        AR6000_STAT_INC(ar, tx_dropped);
+        AR6000_STAT_INC(ar, tx_aborted_errors);
+    }
+
+    return 0;
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+static void
+tvsub(register struct timeval *out, register struct timeval *in)
+{
+    if((out->tv_usec -= in->tv_usec) < 0) {
+        out->tv_sec--;
+        out->tv_usec += 1000000;
+    }
+    out->tv_sec -= in->tv_sec;
+}
+
+void
+applyAPTCHeuristics(AR_SOFTC_T *ar)
+{
+    A_UINT32 duration;
+    A_UINT32 numbytes;
+    A_UINT32 throughput;
+    struct timeval ts;
+    A_STATUS status;
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
+        do_gettimeofday(&ts);
+        tvsub(&ts, &aptcTR.samplingTS);
+        duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
+        numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+
+        if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
+            /* Initialize the time stamp and byte count */
+            aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+            do_gettimeofday(&aptcTR.samplingTS);
+
+            /* Calculate and decide based on throughput thresholds */
+            throughput = ((numbytes * 8) / duration);
+            if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
+                /* Disable Sleep and schedule a timer */
+                A_ASSERT(ar->arWmiReady == TRUE);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+                aptcTR.timerScheduled = TRUE;
+            }
+        }
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+static void
+ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *) Context;
+
+    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+        if (!bypasswmi) {
+                /* under normal WMI if this is getting full, then something is running rampant
+                 * the host should not be exhausting the WMI queue with too many commands
+                 * the only exception to this is during testing using endpointping */
+
+            AR6000_SPIN_LOCK(&ar->arLock, 0);
+                /* set flag to handle subsequent messages */
+            ar->arWMIControlEpFull = TRUE;
+            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n");
+        }
+    } else {
+        /* one of the data endpoints queues is getting full..need to stop network stack
+         * the queue will resume after credits received */
+        netif_stop_queue(ar->arNetDev);
+    }
+}
+
+static void
+ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+
+    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+        /* FIXME: what do for it?  */
+    } else {
+        /* Wake up interface, rescheduling prevented.  */
+        if (ar->arConnected == TRUE || bypasswmi)
+            netif_wake_queue(ar->arNetDev);
+    }
+}
+
+static void
+ar6000_tx_complete(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T     *ar = (AR_SOFTC_T *)Context;
+    void           *cookie = (void *)pPacket->pPktContext;
+    struct sk_buff *skb = NULL;
+    A_UINT32        mapNo = 0;
+    A_STATUS        status;
+    struct ar_cookie * ar_cookie;
+    WMI_PRI_STREAM_ID streamID;
+    A_BOOL          wakeEvent = FALSE;
+
+    status = pPacket->Status;
+    ar_cookie = (struct ar_cookie *)cookie;
+    skb = (struct sk_buff *)ar_cookie->arc_bp[0];
+    streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+    mapNo = ar_cookie->arc_bp[1];
+
+    A_ASSERT(skb);
+    A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb));
+
+    if (A_SUCCESS(status)) {
+        A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb));
+    }
+
+    AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ",
+                     (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+                     pPacket->ActualLength,
+                     streamID);
+
+        /* lock the driver as we update internal state */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    ar->arTxPending[streamID]--;
+
+    if ((streamID != WMI_CONTROL_PRI) || bypasswmi) {
+        ar->arTotalTxDataPending--;
+    }
+
+    if (streamID == WMI_CONTROL_PRI)
+    {
+        if (ar->arWMIControlEpFull) {
+                /* since this packet completed, the WMI EP is no longer full */
+            ar->arWMIControlEpFull = FALSE;
+        }
+
+        if (ar->arTxPending[streamID] == 0) {
+            wakeEvent = TRUE;
+        }
+    }
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__,
+                        status);
+        AR6000_STAT_INC(ar, tx_errors);
+    } else {
+        AR_DEBUG2_PRINTF("OK\n");
+        AR6000_STAT_INC(ar, tx_packets);
+        ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+        aptcTR.bytesTransmitted += a_netbuf_to_len(skb);
+        applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+    }
+
+    // TODO this needs to be looked at
+    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
+        && (streamID != WMI_CONTROL_PRI) && mapNo)
+    {
+        mapNo --;
+        ar->arNodeMap[mapNo].txPending --;
+
+        if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
+            A_UINT32 i;
+            for (i = ar->arNodeNum; i > 0; i --) {
+                if (!ar->arNodeMap[i - 1].txPending) {
+                    A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
+                    ar->arNodeNum --;
+                } else {
+                    break;
+                }
+            }
+        }
+    }
+
+    /* Freeing a cookie should not be contingent on either of */
+    /* these flags, just if we have a cookie or not.           */
+    /* Can we even get here without a cookie? Fix later.       */
+    if (ar->arWmiReady == TRUE || (bypasswmi))
+    {
+        ar6000_free_cookie(ar, cookie);
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    /* lock is released, we can freely call other kernel APIs */
+
+        /* this indirectly frees the HTC_PACKET */
+    A_NETBUF_FREE(skb);
+
+    if (wakeEvent) {
+        wake_up(&arEvent);
+    }
+}
+
+/*
+ * Receive event handler.  This is called by HTC when a packet is received
+ */
+int pktcount;
+static void
+ar6000_rx(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+    struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
+    int minHdrLen;
+    A_STATUS        status = pPacket->Status;
+    WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+    HTC_ENDPOINT_ID   ept = pPacket->Endpoint;
+
+    A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
+
+    AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ",
+                    (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+                    pPacket->ActualLength);
+    if (status != A_OK) {
+        AR_DEBUG2_PRINTF("ERR\n");
+    } else {
+        AR_DEBUG2_PRINTF("OK\n");
+    }
+
+        /* take lock to protect buffer counts
+         * and adaptive power throughput state */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    ar->arRxBuffers[streamID]--;
+
+    if (A_SUCCESS(status)) {
+        AR6000_STAT_INC(ar, rx_packets);
+        ar->arNetStats.rx_bytes += pPacket->ActualLength;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+        aptcTR.bytesReceived += a_netbuf_to_len(skb);
+        applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+        A_NETBUF_PUT(skb, pPacket->ActualLength +  HTC_HEADER_LEN);
+        A_NETBUF_PULL(skb, HTC_HEADER_LEN);
+
+#ifdef DEBUG
+        if (debugdriver >= 2) {
+            ar6000_dump_skb(skb);
+        }
+#endif /* DEBUG */
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (status != A_OK) {
+        AR6000_STAT_INC(ar, rx_errors);
+        A_NETBUF_FREE(skb);
+    } else if (ar->arWmiEnabled == TRUE) {
+        if (streamID == WMI_CONTROL_PRI) {
+           /*
+            * this is a wmi control msg
+            */
+            wmi_control_rx(ar->arWmi, skb);
+        } else {
+            WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
+            if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) {
+                /*
+                 * this is a wmi control msg
+                 */
+                /* strip off WMI hdr */
+                wmi_data_hdr_remove(ar->arWmi, skb);
+                wmi_control_rx(ar->arWmi, skb);
+            } else {
+                /*
+                 * this is a wmi data packet
+                 */
+                minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
+                            sizeof(ATH_LLC_SNAP_HDR);
+
+                if ((pPacket->ActualLength < minHdrLen) ||
+                    (pPacket->ActualLength > AR6000_BUFFER_SIZE))
+                {
+                    /*
+                     * packet is too short or too long
+                     */
+                    AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n");
+                    AR6000_STAT_INC(ar, rx_errors);
+                    AR6000_STAT_INC(ar, rx_length_errors);
+                    A_NETBUF_FREE(skb);
+                } else {
+                    if (ar->arWmmEnabled) {
+                        wmi_implicit_create_pstream(ar->arWmi, skb,
+                            DNLINK_TRAFFIC, UNDEFINED_PRI);
+                    }
+#if 0
+                    /* Access RSSI values here */
+                    AR_DEBUG_PRINTF("RSSI %d\n",
+                        ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi);
+#endif
+                    wmi_data_hdr_remove(ar->arWmi, skb);
+                    wmi_dot3_2_dix(ar->arWmi, skb);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+                    /*
+                     * extra push and memcpy, for eth_type_trans() of 2.4 kernel
+                     * will pull out hard_header_len bytes of the skb.
+                     */
+                    A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN);
+                    A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) +
+                             sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR));
+#endif
+                    if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+                    {
+                        skb->dev = ar->arNetDev;
+                        skb->protocol = eth_type_trans(skb, ar->arNetDev);
+                        netif_rx(skb);
+                    }
+                    else
+                    {
+                        A_NETBUF_FREE(skb);
+                    }
+                }
+            }
+        }
+    } else {
+        if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+        {
+            skb->dev = ar->arNetDev;
+            skb->protocol = eth_type_trans(skb, ar->arNetDev);
+            netif_rx(skb);
+        }
+        else
+        {
+            A_NETBUF_FREE(skb);
+        }
+    }
+
+    if (status != A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        ar6000_rx_refill(Context, ept);
+    }
+
+
+}
+
+static void
+ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T  *ar = (AR_SOFTC_T *)Context;
+    void        *osBuf;
+    int         RxBuffers;
+    int         buffersToRefill;
+    HTC_PACKET  *pPacket;
+    WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint);
+
+    buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
+                                    (int)ar->arRxBuffers[streamId];
+
+    if (buffersToRefill <= 0) {
+            /* fast return, nothing to fill */
+        return;
+    }
+
+    AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
+                    buffersToRefill, Endpoint);
+
+    for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
+        osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
+        if (NULL == osBuf) {
+            break;
+        }
+            /* the HTC packet wrapper is at the head of the reserved area
+             * in the skb */
+        pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
+            /* set re-fill info */
+        SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
+            /* add this packet */
+        HTCAddReceivePkt(ar->arHtcTarget, pPacket);
+    }
+
+        /* update count */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+    ar->arRxBuffers[streamId] += RxBuffers;
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+
+static struct net_device_stats *
+ar6000_get_stats(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    return &ar->arNetStats;
+}
+
+static struct iw_statistics *
+ar6000_get_iwstats(struct net_device * dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    struct iw_statistics * pIwStats = &ar->arIwStats;
+
+    if ((ar->arWmiReady == FALSE)
+    /*
+     * The in_atomic function is used to determine if the scheduling is
+     * allowed in the current context or not. This was introduced in 2.6
+     * From what I have read on the differences between 2.4 and 2.6, the
+     * 2.4 kernel did not support preemption and so this check might not
+     * be required for 2.4 kernels.
+     */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+        || (in_atomic())
+#endif
+       )
+    {
+        pIwStats->status = 0;
+        pIwStats->qual.qual = 0;
+        pIwStats->qual.level =0;
+        pIwStats->qual.noise = 0;
+        pIwStats->discard.code =0;
+        pIwStats->discard.retries=0;
+        pIwStats->miss.beacon =0;
+        return pIwStats;
+    }
+    if (down_interruptible(&ar->arSem)) {
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+
+
+    ar->statsUpdatePending = TRUE;
+
+    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n");
+        up(&ar->arSem);
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+    pIwStats->status = 1 ;
+    pIwStats->qual.qual = pStats->cs_aveBeacon_rssi;
+    pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161;  /* noise is -95 dBm */
+    pIwStats->qual.noise = pStats->noise_floor_calibation;
+    pIwStats->discard.code = pStats->rx_decrypt_err;
+    pIwStats->discard.retries = pStats->tx_retry_cnt;
+    pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
+    up(&ar->arSem);
+    return pIwStats;
+}
+
+void
+ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+    struct net_device *dev = ar->arNetDev;
+
+    ar->arWmiReady = TRUE;
+    wake_up(&arEvent);
+    A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
+    AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+        dev->dev_addr[0], dev->dev_addr[1],
+        dev->dev_addr[2], dev->dev_addr[3],
+        dev->dev_addr[4], dev->dev_addr[5]);
+
+    ar->arPhyCapability = phyCap;
+}
+
+A_UINT8
+ar6000_iptos_to_userPriority(A_UINT8 *pkt)
+{
+    struct iphdr *ipHdr = (struct iphdr *)pkt;
+    A_UINT8 userPriority;
+
+    /*
+     * IP Tos format :
+     *      (Refer Pg 57 WMM-test-plan-v1.2)
+     * IP-TOS - 8bits
+     *          : DSCP(6-bits) ECN(2-bits)
+     *          : DSCP - P2 P1 P0 X X X
+     *              where (P2 P1 P0) form 802.1D
+     */
+    userPriority = ipHdr->tos >> 5;
+    return (userPriority & 0x7);
+}
+
+void
+ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
+                     A_UINT16 listenInterval, A_UINT16 beaconInterval,
+                     NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
+                     A_UINT8 assocReqLen, A_UINT8 assocRespLen,
+                     A_UINT8 *assocInfo)
+{
+    union iwreq_data wrqu;
+    int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
+    static const char *tag1 = "ASSOCINFO(ReqIEs=";
+    static const char *tag2 = "ASSOCRESPIE=";
+    static const char *beaconIetag = "BEACONIE=";
+    char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)];
+    char *pos;
+    A_UINT8 key_op_ctrl;
+
+    A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
+    ar->arBssChannel = channel;
+
+    A_PRINTF("AR6000 connected event on freq %d ", channel);
+    A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+            " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
+            " assocRespLen =%d\n",
+             bssid[0], bssid[1], bssid[2],
+             bssid[3], bssid[4], bssid[5],
+             listenInterval, beaconInterval,
+             beaconIeLen, assocReqLen, assocRespLen);
+    if (networkType & ADHOC_NETWORK) {
+        if (networkType & ADHOC_CREATOR) {
+            A_PRINTF("Network: Adhoc (Creator)\n");
+        } else {
+            A_PRINTF("Network: Adhoc (Joiner)\n");
+        }
+    } else {
+        A_PRINTF("Network: Infrastructure\n");
+    }
+
+    if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
+        AR_DEBUG_PRINTF("\nBeaconIEs= ");
+
+        beacon_ie_pos = 0;
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", beaconIetag);
+        pos = buf + 9;
+        for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+    if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
+    {
+        assoc_resp_ie_pos = beaconIeLen + assocReqLen +
+                            sizeof(A_UINT16)  +  /* capinfo*/
+                            sizeof(A_UINT16)  +  /* status Code */
+                            sizeof(A_UINT16)  ;  /* associd */
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", tag2);
+        pos = buf + 12;
+        AR_DEBUG_PRINTF("\nAssocRespIEs= ");
+        /*
+         * The Association Response Frame w.o. the WLAN header is delivered to
+         * the host, so skip over to the IEs
+         */
+        for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
+        {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+    if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
+        /*
+         * assoc Request includes capability and listen interval. Skip these.
+         */
+        assoc_req_ie_pos =  beaconIeLen +
+                            sizeof(A_UINT16)  +  /* capinfo*/
+                            sizeof(A_UINT16);    /* listen interval */
+
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", tag1);
+        pos = buf + 17;
+        AR_DEBUG_PRINTF("AssocReqIEs= ");
+        for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+#ifdef USER_KEYS
+    if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
+        ar->user_saved_keys.keyOk == TRUE)
+    {
+
+        key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
+        if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
+            key_op_ctrl &= ~KEY_OP_INIT_RSC;
+        } else {
+            key_op_ctrl |= KEY_OP_INIT_RSC;
+        }
+        ar6000_reinstall_keys(ar, key_op_ctrl);
+    }
+#endif /* USER_KEYS */
+
+        /* flush data queues */
+    ar6000_TxDataCleanup(ar);
+
+    netif_start_queue(ar->arNetDev);
+
+    if ((OPEN_AUTH == ar->arDot11AuthMode) &&
+        (NONE_AUTH == ar->arAuthMode)      &&
+        (WEP_CRYPT == ar->arPairwiseCrypto))
+    {
+        if (!ar->arConnected) {
+            ar6000_install_static_wep_keys(ar);
+        }
+    }
+
+    ar->arConnected  = TRUE;
+    ar->arConnectPending = FALSE;
+
+    reconnect_flag = 0;
+
+    A_MEMZERO(&wrqu, sizeof(wrqu));
+    A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
+    wrqu.addr.sa_family = ARPHRD_ETHER;
+    wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
+    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
+        A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
+        ar->arNodeNum = 0;
+        ar->arNexEpId = ENDPOINT_2;
+    }
+
+}
+
+void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
+{
+    A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
+    ar->arNumDataEndPts = num;
+}
+
+void
+ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
+                        A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
+{
+    A_UINT8 i;
+
+    A_PRINTF("AR6000 disconnected");
+    if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
+        A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+                 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+    }
+    A_PRINTF("\n");
+
+    AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason);
+    AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus);
+    AR_DEBUG_PRINTF("\nAssocResp Frame = %s",
+                    assocRespLen ? " " : "NULL");
+    for (i = 0; i < assocRespLen; i++) {
+        if (!(i % 0x10)) {
+            AR_DEBUG_PRINTF("\n");
+        }
+        AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+    }
+    AR_DEBUG_PRINTF("\n");
+    /*
+     * If the event is due to disconnect cmd from the host, only they the target
+     * would stop trying to connect. Under any other condition, target would
+     * keep trying to connect.
+     *
+     */
+    if( reason == DISCONNECT_CMD)
+    {
+        ar->arConnectPending = FALSE;
+    } else {
+        ar->arConnectPending = TRUE;
+        if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
+            ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
+            ar->arConnected = TRUE;
+            return;
+        }
+    }
+    ar->arConnected = FALSE;
+
+    if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
+        reconnect_flag = 0;
+    }
+
+#ifdef USER_KEYS
+    if (reason != CSERV_DISCONNECT)
+    {
+        ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+        ar->user_key_ctrl      = 0;
+    }
+#endif /* USER_KEYS */
+
+    netif_stop_queue(ar->arNetDev);
+    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+    ar->arBssChannel = 0;
+    ar->arBeaconInterval = 0;
+
+    ar6000_TxDataCleanup(ar);
+}
+
+void
+ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
+{
+    A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
+    ar->arRegCode = regCode;
+}
+
+void
+ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
+{
+    static const char *tag = "PRE-AUTH";
+    char buf[128];
+    union iwreq_data wrqu;
+    int i;
+
+    AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n");
+    for (i=0; i < numAps; info++, i++) {
+        AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+            info->bssid[0], info->bssid[1], info->bssid[2],
+            info->bssid[3], info->bssid[4], info->bssid[5]);
+        if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
+            AR_DEBUG_PRINTF("preauth-cap");
+        }
+        if (info->bssFlags & WMI_PMKID_VALID_BSS) {
+            AR_DEBUG_PRINTF(" pmkid-valid\n");
+            continue;           /* we skip bss if the pmkid is already valid */
+        }
+        AR_DEBUG_PRINTF("\n");
+        snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
+                 tag,
+                 info->bssid[0], info->bssid[1], info->bssid[2],
+                 info->bssid[3], info->bssid[4], info->bssid[5],
+                 i, info->bssFlags);
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+}
+
+void
+ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
+{
+    static const char *tag = "MLME-MICHAELMICFAILURE.indication";
+    char buf[128];
+    union iwreq_data wrqu;
+
+    A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
+             keyid, ismcast ? "multi": "uni");
+    snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid,
+             ismcast ? "multi" : "uni");
+    memset(&wrqu, 0, sizeof(wrqu));
+    wrqu.data.length = strlen(buf);
+    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+}
+
+void
+ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
+{
+	AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status);
+
+	ar->scan_complete = 1;
+	wake_up_interruptible(&ar6000_scan_queue);
+}
+
+void
+ar6000_targetStats_event(AR_SOFTC_T *ar,  WMI_TARGET_STATS *pTarget)
+{
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    A_UINT8 ac;
+
+    /*A_PRINTF("AR6000 updating target stats\n");*/
+    pStats->tx_packets          += pTarget->txrxStats.tx_stats.tx_packets;
+    pStats->tx_bytes            += pTarget->txrxStats.tx_stats.tx_bytes;
+    pStats->tx_unicast_pkts     += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
+    pStats->tx_unicast_bytes    += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
+    pStats->tx_multicast_pkts   += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
+    pStats->tx_multicast_bytes  += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
+    pStats->tx_broadcast_pkts   += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
+    pStats->tx_broadcast_bytes  += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
+    pStats->tx_rts_success_cnt  += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
+    for(ac = 0; ac < WMM_NUM_AC; ac++)
+        pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
+    pStats->tx_errors           += pTarget->txrxStats.tx_stats.tx_errors;
+    pStats->tx_failed_cnt       += pTarget->txrxStats.tx_stats.tx_failed_cnt;
+    pStats->tx_retry_cnt        += pTarget->txrxStats.tx_stats.tx_retry_cnt;
+    pStats->tx_rts_fail_cnt     += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
+    pStats->tx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
+
+    pStats->rx_packets          += pTarget->txrxStats.rx_stats.rx_packets;
+    pStats->rx_bytes            += pTarget->txrxStats.rx_stats.rx_bytes;
+    pStats->rx_unicast_pkts     += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
+    pStats->rx_unicast_bytes    += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
+    pStats->rx_multicast_pkts   += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
+    pStats->rx_multicast_bytes  += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
+    pStats->rx_broadcast_pkts   += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
+    pStats->rx_broadcast_bytes  += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
+    pStats->rx_fragment_pkt     += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
+    pStats->rx_errors           += pTarget->txrxStats.rx_stats.rx_errors;
+    pStats->rx_crcerr           += pTarget->txrxStats.rx_stats.rx_crcerr;
+    pStats->rx_key_cache_miss   += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
+    pStats->rx_decrypt_err      += pTarget->txrxStats.rx_stats.rx_decrypt_err;
+    pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
+    pStats->rx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
+
+
+    pStats->tkip_local_mic_failure
+                                += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
+    pStats->tkip_counter_measures_invoked
+                                += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
+    pStats->tkip_replays        += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
+    pStats->tkip_format_errors  += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
+    pStats->ccmp_format_errors  += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
+    pStats->ccmp_replays        += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
+
+
+    pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
+    pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
+
+    pStats->cs_bmiss_cnt        += pTarget->cservStats.cs_bmiss_cnt;
+    pStats->cs_lowRssi_cnt      += pTarget->cservStats.cs_lowRssi_cnt;
+    pStats->cs_connect_cnt      += pTarget->cservStats.cs_connect_cnt;
+    pStats->cs_disconnect_cnt   += pTarget->cservStats.cs_disconnect_cnt;
+    pStats->cs_aveBeacon_snr    = pTarget->cservStats.cs_aveBeacon_snr;
+    pStats->cs_aveBeacon_rssi   = pTarget->cservStats.cs_aveBeacon_rssi;
+    pStats->cs_lastRoam_msec    = pTarget->cservStats.cs_lastRoam_msec;
+    pStats->cs_snr              = pTarget->cservStats.cs_snr;
+    pStats->cs_rssi             = pTarget->cservStats.cs_rssi;
+
+    pStats->lq_val              = pTarget->lqVal;
+
+    pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
+    pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
+    pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
+    pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
+
+    ar->statsUpdatePending = FALSE;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_rssiThreshold_event(AR_SOFTC_T *ar,  WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
+{
+    USER_RSSI_THOLD userRssiThold;
+
+    userRssiThold.tag = rssi_map[newThreshold].tag;
+    userRssiThold.rssi = rssi;
+    AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d  rssi = %d\n", newThreshold, userRssiThold.tag, rssi);
+#ifdef SEND_EVENT_TO_APP
+    ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
+#endif
+}
+
+
+void
+ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
+{
+    if (source == APP_HB_CHALLENGE) {
+        /* Report it to the app in case it wants a positive acknowledgement */
+#ifdef SEND_EVENT_TO_APP
+        ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
+                                 (A_UINT8 *)&cookie, sizeof(cookie));
+#endif
+    } else {
+        /* This would ignore the replys that come in after their due time */
+        if (cookie == ar->arHBChallengeResp.seqNum) {
+            ar->arHBChallengeResp.outstanding = FALSE;
+        }
+    }
+}
+
+
+void
+ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
+{
+    char    *errString[] = {
+                [WMI_TARGET_PM_ERR_FAIL]    "WMI_TARGET_PM_ERR_FAIL",
+                [WMI_TARGET_KEY_NOT_FOUND]  "WMI_TARGET_KEY_NOT_FOUND",
+                [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
+                [WMI_TARGET_BMISS]          "WMI_TARGET_BMISS",
+                [WMI_PSDISABLE_NODE_JOIN]   "WMI_PSDISABLE_NODE_JOIN"
+                };
+
+    A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
+
+    /* One error is reported at a time, and errorval is a bitmask */
+    if(errorVal & (errorVal - 1))
+       return;
+
+    A_PRINTF("AR6000 Error type = ");
+    switch(errorVal)
+    {
+        case WMI_TARGET_PM_ERR_FAIL:
+        case WMI_TARGET_KEY_NOT_FOUND:
+        case WMI_TARGET_DECRYPTION_ERR:
+        case WMI_TARGET_BMISS:
+        case WMI_PSDISABLE_NODE_JOIN:
+            A_PRINTF("%s\n", errString[errorVal]);
+            break;
+        default:
+            A_PRINTF("INVALID\n");
+            break;
+    }
+
+}
+
+
+void
+ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
+                 A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
+{
+    WMM_TSPEC_IE    *tspecIe;
+
+    /*
+     * This is the TSPEC IE suggestion from AP.
+     * Suggestion provided by AP under some error
+     * cases, could be helpful for the host app.
+     * Check documentation.
+     */
+    tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
+
+    /*
+     * What do we do, if we get TSPEC rejection? One thought
+     * that comes to mind is implictly delete the pstream...
+     */
+    A_PRINTF("AR6000 CAC notification. "
+                "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
+                 ac, cacIndication, statusCode);
+}
+
+#define AR6000_PRINT_BSSID(_pBss)  do {     \
+        A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
+                 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
+                 (_pBss)[4],(_pBss)[5]);  \
+} while(0)
+
+void
+ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
+{
+    A_UINT8 i;
+
+    A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
+              pTbl->numEntries, pTbl->roamMode);
+    for (i= 0; i < pTbl->numEntries; i++) {
+        A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
+            pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
+            pTbl->bssRoamInfo[i].bssid[2],
+            pTbl->bssRoamInfo[i].bssid[3],
+            pTbl->bssRoamInfo[i].bssid[4],
+            pTbl->bssRoamInfo[i].bssid[5]);
+        A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
+                 " BIAS %d\n",
+            pTbl->bssRoamInfo[i].rssi,
+            pTbl->bssRoamInfo[i].rssidt,
+            pTbl->bssRoamInfo[i].last_rssi,
+            pTbl->bssRoamInfo[i].util,
+            pTbl->bssRoamInfo[i].roam_util,
+            pTbl->bssRoamInfo[i].bias);
+    }
+}
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
+{
+    A_UINT8 i,j;
+
+    /*Each event now contains exactly one filter, see bug 26613*/
+    A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num,                 wow_reply->num_filters);
+    A_PRINTF("wow mode = %s host mode = %s\n",
+            (wow_reply->wow_mode == 0? "disabled":"enabled"),
+            (wow_reply->host_mode == 1 ? "awake":"asleep"));
+
+
+    /*If there are no patterns, the reply will only contain generic
+      WoW information. Pattern information will exist only if there are
+      patterns present. Bug 26716*/
+
+   /* If this event contains pattern information, display it*/
+    if (wow_reply->this_filter_num) {
+        i=0;
+        A_PRINTF("id=%d size=%d offset=%d\n",
+                    wow_reply->wow_filters[i].wow_filter_id,
+                    wow_reply->wow_filters[i].wow_filter_size,
+                    wow_reply->wow_filters[i].wow_filter_offset);
+       A_PRINTF("wow pattern = ");
+       for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+             A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
+        }
+
+        A_PRINTF("\nwow mask = ");
+        for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+            A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
+        }
+        A_PRINTF("\n");
+    }
+}
+
+/*
+ * Report the Roaming related data collected on the target
+ */
+void
+ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
+{
+    A_PRINTF("Disconnect Data : BSSID: ");
+    AR6000_PRINT_BSSID(p->disassoc_bssid);
+    A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
+             p->disassoc_bss_rssi,p->disassoc_time,
+             p->no_txrx_time);
+    A_PRINTF("Connect Data: BSSID: ");
+    AR6000_PRINT_BSSID(p->assoc_bssid);
+    A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
+             p->assoc_bss_rssi,p->assoc_time,
+             p->allow_txrx_time);
+    A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\
+             "First Data Tx Time (after Assoc) %d\n",
+             p->last_data_txrx_time, p->first_data_txrx_time);
+}
+
+void
+ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
+{
+    switch (p->roamDataType) {
+        case ROAM_DATA_TIME:
+            ar6000_display_roam_time(&p->u.roamTime);
+            break;
+        default:
+            break;
+    }
+}
+
+void
+ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
+{
+    struct sk_buff *skb;
+    WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
+
+
+    if (!ar->arMgmtFilter) {
+        return;
+    }
+    if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
+        (bih->frameType != BEACON_FTYPE))  ||
+        ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
+        (bih->frameType != PROBERESP_FTYPE)))
+    {
+        return;
+    }
+
+    if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
+
+        A_NETBUF_PUT(skb, len);
+        A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
+        skb->dev = ar->arNetDev;
+	printk("MAC RAW...\n");
+//        skb->mac.raw = A_NETBUF_DATA(skb);
+        skb->ip_summed = CHECKSUM_NONE;
+        skb->pkt_type = PACKET_OTHERHOST;
+        skb->protocol = __constant_htons(0x0019);
+        netif_rx(skb);
+    }
+}
+
+A_UINT32 wmiSendCmdNum;
+
+A_STATUS
+ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+    AR_SOFTC_T       *ar = (AR_SOFTC_T *)devt;
+    A_STATUS         status = A_OK;
+    struct ar_cookie *cookie = NULL;
+    int i;
+
+        /* take lock to protect ar6000_alloc_cookie() */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    do {
+
+        AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n",
+                         (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID);
+
+        if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) {
+                /* control endpoint is full, don't allocate resources, we
+                 * are just going to drop this packet */
+            cookie = NULL;
+            AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n",
+                    (A_UINT32)osbuf, A_NETBUF_LEN(osbuf));
+        } else {
+            cookie = ar6000_alloc_cookie(ar);
+        }
+
+        if (cookie == NULL) {
+            status = A_NO_MEMORY;
+            break;
+        }
+
+        if(logWmiRawMsgs) {
+            A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
+            for(i = 0; i < a_netbuf_to_len(osbuf); i++)
+                A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
+            A_PRINTF("\n");
+        }
+
+        wmiSendCmdNum++;
+
+    } while (FALSE);
+
+    if (cookie != NULL) {
+            /* got a structure to send it out on */
+        ar->arTxPending[streamID]++;
+
+        if (streamID != WMI_CONTROL_PRI) {
+            ar->arTotalTxDataPending++;
+        }
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (cookie != NULL) {
+        cookie->arc_bp[0] = (A_UINT32)osbuf;
+        cookie->arc_bp[1] = 0;
+        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+                               cookie,
+                               A_NETBUF_DATA(osbuf),
+                               A_NETBUF_LEN(osbuf),
+                               arWMIStream2EndpointID(ar,streamID),
+                               AR6K_CONTROL_PKT_TAG);
+            /* this interface is asynchronous, if there is an error, cleanup will happen in the
+             * TX completion callback */
+        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+        status = A_OK;
+    }
+
+    return status;
+}
+
+/* indicate tx activity or inactivity on a WMI stream */
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
+{
+    AR_SOFTC_T  *ar = (AR_SOFTC_T *)devt;
+    WMI_PRI_STREAM_ID streamid;
+
+    if (ar->arWmiEnabled) {
+        streamid = wmi_get_stream_id(ar->arWmi, TrafficClass);
+    } else {
+            /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
+             * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */
+        streamid = (WMI_PRI_STREAM_ID)TrafficClass;
+    }
+
+        /* notify HTC, this may cause credit distribution changes */
+
+    HTCIndicateActivityChange(ar->arHtcTarget,
+                              arWMIStream2EndpointID(ar,streamid),
+                              Active);
+
+}
+
+module_init(ar6000_init_module);
+module_exit(ar6000_cleanup_module);
+
+/* Init cookie queue */
+static void
+ar6000_cookie_init(AR_SOFTC_T *ar)
+{
+    A_UINT32    i;
+
+    ar->arCookieList = NULL;
+    A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
+
+    for (i = 0; i < MAX_COOKIE_NUM; i++) {
+        ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
+    }
+}
+
+/* cleanup cookie queue */
+static void
+ar6000_cookie_cleanup(AR_SOFTC_T *ar)
+{
+    /* It is gone .... */
+    ar->arCookieList = NULL;
+}
+
+/* Init cookie queue */
+static void
+ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
+{
+    /* Insert first */
+    A_ASSERT(ar != NULL);
+    A_ASSERT(cookie != NULL);
+    cookie->arc_list_next = ar->arCookieList;
+    ar->arCookieList = cookie;
+}
+
+/* cleanup cookie queue */
+static struct ar_cookie *
+ar6000_alloc_cookie(AR_SOFTC_T  *ar)
+{
+    struct ar_cookie   *cookie;
+
+    cookie = ar->arCookieList;
+    if(cookie != NULL)
+    {
+        ar->arCookieList = cookie->arc_list_next;
+    }
+
+    return cookie;
+}
+
+#ifdef SEND_EVENT_TO_APP
+/*
+ * This function is used to send event which come from taget to
+ * the application. The buf which send to application is include
+ * the event ID and event content.
+ */
+#define EVENT_ID_LEN   2
+void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
+                              A_UINT8 *datap, int len)
+{
+
+#if (WIRELESS_EXT >= 15)
+
+/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
+
+    char *buf;
+    A_UINT16 size;
+    union iwreq_data wrqu;
+
+    size = len + EVENT_ID_LEN;
+
+    if (size > IW_CUSTOM_MAX) {
+        AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
+                eventId, size, IW_CUSTOM_MAX);
+        return;
+    }
+
+    buf = A_MALLOC_NOWAIT(size);
+    A_MEMZERO(buf, size);
+    A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
+    A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
+
+    //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size);
+    A_MEMZERO(&wrqu, sizeof(wrqu));
+    wrqu.data.length = size;
+    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+
+    A_FREE(buf);
+#endif
+
+
+}
+#endif
+
+
+void
+ar6000_tx_retry_err_event(void *devt)
+{
+    AR_DEBUG2_PRINTF("Tx retries reach maximum!\n");
+}
+
+void
+ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
+{
+    AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr);
+}
+
+void
+ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
+{
+    AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq);
+}
+
+
+
+A_UINT32
+a_copy_to_user(void *to, const void *from, A_UINT32 n)
+{
+    return(copy_to_user(to, from, n));
+}
+
+A_UINT32
+a_copy_from_user(void *to, const void *from, A_UINT32 n)
+{
+    return(copy_from_user(to, from, n));
+}
+
+
+A_STATUS
+ar6000_get_driver_cfg(struct net_device *dev,
+                        A_UINT16 cfgParam,
+                        void *result)
+{
+
+    A_STATUS    ret = 0;
+
+    switch(cfgParam)
+    {
+        case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
+           *((A_UINT32 *)result) = wlanNodeCaching;
+           break;
+        case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
+           *((A_UINT32 *)result) = logWmiRawMsgs;
+            break;
+        default:
+           ret = EINVAL;
+           break;
+    }
+
+    return ret;
+}
+
+void
+ar6000_keepalive_rx(void *devt, A_UINT8 configured)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arKeepaliveConfigured = configured;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList)
+{
+    A_UINT8 i, j;
+
+    A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
+
+    for (i = 0; i < numPMKID; i++) {
+        A_PRINTF("\nPMKID %d ", i);
+            for (j = 0; j < WMI_PMKID_LEN; j++) {
+                A_PRINTF("%2.2x", pmkidList->pmkid[j]);
+            }
+        pmkidList++;
+    }
+}
+
+#ifdef USER_KEYS
+static A_STATUS
+
+ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
+{
+    A_STATUS status = A_OK;
+    struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
+    struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
+    CRYPTO_TYPE  keyType = ar->user_saved_keys.keyType;
+
+    if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            goto _reinstall_keys_out;
+        }
+
+        if (uik->ik_keylen) {
+            status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
+                    ar->user_saved_keys.keyType, PAIRWISE_USAGE,
+                    uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
+                    uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG);
+        }
+
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
+    }
+
+    if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            goto _reinstall_keys_out;
+        }
+
+        if (bik->ik_keylen) {
+            status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
+                    ar->user_saved_keys.keyType, GROUP_USAGE,
+                    bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
+                    bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG);
+        }
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
+    }
+
+_reinstall_keys_out:
+    ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+    ar->user_key_ctrl      = 0;
+
+    return status;
+}
+#endif /* USER_KEYS */
+
+
+void
+ar6000_dset_open_req(
+    void *context,
+    A_UINT32 id,
+    A_UINT32 targHandle,
+    A_UINT32 targReplyFn,
+    A_UINT32 targReplyArg)
+{
+}
+
+void
+ar6000_dset_close(
+    void *context,
+    A_UINT32 access_cookie)
+{
+    return;
+}
+
+void
+ar6000_dset_data_req(
+   void *context,
+   A_UINT32 accessCookie,
+   A_UINT32 offset,
+   A_UINT32 length,
+   A_UINT32 targBuf,
+   A_UINT32 targReplyFn,
+   A_UINT32 targReplyArg)
+{
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.h
new file mode 100644
index 0000000..784f158
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_drv.h
@@ -0,0 +1,360 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _AR6000_H_
+#define _AR6000_H_
+
+#include <linux/version.h>
+
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/iw_handler.h>
+#include <linux/if_arp.h>
+#include <linux/ip.h>
+#include <linux/semaphore.h>
+#include <linux/wireless.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+#include <a_config.h>
+#include <athdefs.h>
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include "a_drv.h"
+#include "bmi.h"
+#include <ieee80211.h>
+#include <ieee80211_ioctl.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "gpio_api.h"
+#include "gpio.h"
+#include <host_version.h>
+#include <linux/rtnetlink.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include "AR6Khwreg.h"
+#include "ar6000_api.h"
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#include <testcmd.h>
+#endif
+
+#include "targaddrs.h"
+#include "dbglog_api.h"
+#include "ar6000_diag.h"
+#include "common_drv.h"
+
+#ifndef  __dev_put
+#define  __dev_put(dev) dev_put(dev)
+#endif
+
+#ifdef USER_KEYS
+
+#define USER_SAVEDKEYS_STAT_INIT     0
+#define USER_SAVEDKEYS_STAT_RUN      1
+
+// TODO this needs to move into the AR_SOFTC struct
+struct USER_SAVEDKEYS {
+    struct ieee80211req_key   ucast_ik;
+    struct ieee80211req_key   bcast_ik;
+    CRYPTO_TYPE               keyType;
+    A_BOOL                    keyOk;
+};
+#endif
+
+#define DBG_INFO		0x00000001
+#define DBG_ERROR		0x00000002
+#define DBG_WARNING		0x00000004
+#define DBG_SDIO		0x00000008
+#define DBG_HIF			0x00000010
+#define DBG_HTC			0x00000020
+#define DBG_WMI			0x00000040
+#define DBG_WMI2		0x00000080
+#define DBG_DRIVER		0x00000100
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+
+#ifdef DEBUG
+#define AR_DEBUG_PRINTF(args...)        if (debugdriver) A_PRINTF(args);
+#define AR_DEBUG2_PRINTF(args...)        if (debugdriver >= 2) A_PRINTF(args);
+extern int debugdriver;
+#else
+#define AR_DEBUG_PRINTF(args...)
+#define AR_DEBUG2_PRINTF(args...)
+#endif
+
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define	MAX_AR6000                        1
+#define AR6000_MAX_RX_BUFFERS             16
+#define AR6000_BUFFER_SIZE                1664
+#define AR6000_TX_TIMEOUT                 10
+#define	AR6000_ETH_ADDR_LEN               6
+#define	AR6000_MAX_ENDPOINTS              4
+#define MAX_NODE_NUM                      15
+#define MAX_COOKIE_NUM                    150
+#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT        1
+#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT  1
+
+enum {
+    DRV_HB_CHALLENGE = 0,
+    APP_HB_CHALLENGE
+};
+
+/* HTC RAW streams */
+typedef enum _HTC_RAW_STREAM_ID {
+    HTC_RAW_STREAM_NOT_MAPPED = -1,
+    HTC_RAW_STREAM_0 = 0,
+    HTC_RAW_STREAM_1 = 1,
+    HTC_RAW_STREAM_2 = 2,
+    HTC_RAW_STREAM_3 = 3,
+    HTC_RAW_STREAM_NUM_MAX
+} HTC_RAW_STREAM_ID;
+
+#define RAW_HTC_READ_BUFFERS_NUM    4
+#define RAW_HTC_WRITE_BUFFERS_NUM   4
+
+typedef struct {
+    int currPtr;
+    int length;
+    unsigned char data[AR6000_BUFFER_SIZE];
+    HTC_PACKET    HTCPacket;
+} raw_htc_buffer;
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/*
+ *  add TCMD_MODE besides wmi and bypasswmi
+ *  in TCMD_MODE, only few TCMD releated wmi commands
+ *  counld be hanlder
+ */
+enum {
+    AR6000_WMI_MODE = 0,
+    AR6000_BYPASS_MODE,
+    AR6000_TCMD_MODE,
+    AR6000_WLAN_MODE
+};
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+struct ar_wep_key {
+    A_UINT8                 arKeyIndex;
+    A_UINT8                 arKeyLen;
+    A_UINT8                 arKey[64];
+} ;
+
+struct ar_node_mapping {
+    A_UINT8                 macAddress[6];
+    A_UINT8                 epId;
+    A_UINT8                 txPending;
+};
+
+struct ar_cookie {
+    A_UINT32               arc_bp[2];    /* Must be first field */
+    HTC_PACKET             HtcPkt;       /* HTC packet wrapper */
+    struct ar_cookie *arc_list_next;
+};
+
+struct ar_hb_chlng_resp {
+    A_TIMER                 timer;
+    A_UINT32                frequency;
+    A_UINT32                seqNum;
+    A_BOOL                  outstanding;
+    A_UINT8                 missCnt;
+    A_UINT8                 missThres;
+};
+
+typedef struct ar6_softc {
+    struct net_device       *arNetDev;    /* net_device pointer */
+    void                    *arWmi;
+    int                     arTxPending[WMI_PRI_MAX_COUNT];
+    int                     arTotalTxDataPending;
+    A_UINT8                 arNumDataEndPts;
+    A_BOOL                  arWmiEnabled;
+    A_BOOL                  arWmiReady;
+    A_BOOL                  arConnected;
+    A_BOOL                  arRadioSwitch;
+    HTC_HANDLE              arHtcTarget;
+    void                    *arHifDevice;
+    spinlock_t              arLock;
+    struct semaphore        arSem;
+    int                     arRxBuffers[WMI_PRI_MAX_COUNT];
+    int                     arSsidLen;
+    u_char                  arSsid[32];
+    A_UINT8                 arNetworkType;
+    A_UINT8                 arDot11AuthMode;
+    A_UINT8                 arAuthMode;
+    A_UINT8                 arPairwiseCrypto;
+    A_UINT8                 arPairwiseCryptoLen;
+    A_UINT8                 arGroupCrypto;
+    A_UINT8                 arGroupCryptoLen;
+    A_UINT8                 arDefTxKeyIndex;
+    struct ar_wep_key       arWepKeyList[WMI_MAX_KEY_INDEX + 1];
+    A_UINT8                 arBssid[6];
+    A_UINT8                 arReqBssid[6];
+    A_UINT16                arChannelHint;
+    A_UINT16                arBssChannel;
+    A_UINT16                arListenInterval;
+    struct ar6000_version   arVersion;
+    A_UINT32                arTargetType;
+    A_INT8                  arRssi;
+    A_UINT8                 arTxPwr;
+    A_BOOL                  arTxPwrSet;
+    A_INT32                 arBitRate;
+    struct net_device_stats arNetStats;
+    struct iw_statistics 	arIwStats;
+    A_INT8                  arNumChannels;
+    A_UINT16                arChannelList[32];
+    A_UINT32                arRegCode;
+    A_BOOL                  statsUpdatePending;
+    TARGET_STATS            arTargetStats;
+    A_INT8                  arMaxRetries;
+    A_UINT8                 arPhyCapability;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    A_UINT8                 tcmdRxReport;
+    A_UINT32                tcmdRxTotalPkt;
+    A_INT32                 tcmdRxRssi;
+    A_UINT32                tcmdPm;
+   A_UINT32                 arTargetMode;
+#endif
+    AR6000_WLAN_STATE       arWlanState;
+    struct ar_node_mapping  arNodeMap[MAX_NODE_NUM];
+    A_UINT8                 arIbssPsEnable;
+    A_UINT8                 arNodeNum;
+    A_UINT8                 arNexEpId;
+    struct ar_cookie        *arCookieList;
+    A_UINT16                arRateMask;
+    A_UINT8                 arSkipScan;
+    A_UINT16                arBeaconInterval;
+    A_BOOL                  arConnectPending;
+    A_BOOL                  arWmmEnabled;
+    struct ar_hb_chlng_resp arHBChallengeResp;
+    A_UINT8                 arKeepaliveConfigured;
+    A_UINT32                arMgmtFilter;
+    HTC_ENDPOINT_ID         arWmi2EpMapping[WMI_PRI_MAX_COUNT];
+    WMI_PRI_STREAM_ID       arEp2WmiMapping[ENDPOINT_MAX];
+#ifdef HTC_RAW_INTERFACE
+    HTC_ENDPOINT_ID         arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX];
+    HTC_RAW_STREAM_ID       arEp2RawMapping[ENDPOINT_MAX];
+    struct semaphore        raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX];
+    struct semaphore        raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX];
+    wait_queue_head_t       raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX];
+    wait_queue_head_t       raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX];
+    raw_htc_buffer          *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM];
+    raw_htc_buffer          *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM];
+    A_BOOL                  write_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+    A_BOOL                  read_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+#endif
+    A_BOOL                  arRawIfInit;
+    int                     arDeviceIndex;
+    COMMON_CREDIT_STATE_INFO arCreditStateInfo;
+    A_BOOL                  arWMIControlEpFull;
+    A_BOOL                  dbgLogFetchInProgress;
+    A_UCHAR                 log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE];
+    A_UINT32                log_cnt;
+    A_UINT32                dbglog_init_done;
+    A_UINT32                arConnectCtrlFlags;
+	A_UINT32                scan_complete;
+#ifdef USER_KEYS
+    A_INT32                 user_savedkeys_stat;
+    A_UINT32                user_key_ctrl;
+    struct USER_SAVEDKEYS   user_saved_keys;
+#endif
+} AR_SOFTC_T;
+
+
+#define arWMIStream2EndpointID(ar,wmi)          (ar)->arWmi2EpMapping[(wmi)]
+#define arSetWMIStream2EndpointIDMap(ar,wmi,ep)  \
+{  (ar)->arWmi2EpMapping[(wmi)] = (ep); \
+   (ar)->arEp2WmiMapping[(ep)] = (wmi); }
+#define arEndpoint2WMIStreamID(ar,ep)           (ar)->arEp2WmiMapping[(ep)]
+
+#define arRawIfEnabled(ar) (ar)->arRawIfInit
+#define arRawStream2EndpointID(ar,raw)          (ar)->arRaw2EpMapping[(raw)]
+#define arSetRawStream2EndpointIDMap(ar,raw,ep)  \
+{  (ar)->arRaw2EpMapping[(raw)] = (ep); \
+   (ar)->arEp2RawMapping[(ep)] = (raw); }
+#define arEndpoint2RawStreamID(ar,ep)           (ar)->arEp2RawMapping[(ep)]
+
+struct ar_giwscan_param {
+    char    *current_ev;
+    char    *end_buf;
+    A_BOOL  firstPass;
+};
+
+#define AR6000_STAT_INC(ar, stat)       (ar->arNetStats.stat++)
+
+#define AR6000_SPIN_LOCK(lock, param)   do {                            \
+    if (irqs_disabled()) {                                              \
+        AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n");                 \
+    }                                                                   \
+    spin_lock_bh(lock);                                                 \
+} while (0)
+
+#define AR6000_SPIN_UNLOCK(lock, param) do {                            \
+    if (irqs_disabled()) {                                              \
+        AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n");              \
+    }                                                                   \
+    spin_unlock_bh(lock);                                               \
+} while (0)
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd);
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def);
+void ar6000_gpio_init(void);
+void ar6000_init_profile_info(AR_SOFTC_T *ar);
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar);
+int ar6000_init(struct net_device *dev);
+int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar);
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar);
+
+#ifdef HTC_RAW_INTERFACE
+
+#ifndef __user
+#define __user
+#endif
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar);
+int ar6000_htc_raw_close(AR_SOFTC_T *ar);
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar,
+                            HTC_RAW_STREAM_ID StreamID,
+                            char __user *buffer, size_t count);
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar,
+                             HTC_RAW_STREAM_ID StreamID,
+                             char __user *buffer, size_t count);
+
+#endif /* HTC_RAW_INTERFACE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _AR6000_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_raw_if.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_raw_if.c
new file mode 100644
index 0000000..4443bb2
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6000_raw_if.c
@@ -0,0 +1,440 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+#ifdef HTC_RAW_INTERFACE
+
+static void
+ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T        *ar = (AR_SOFTC_T *)Context;
+    raw_htc_buffer    *busy;
+    HTC_RAW_STREAM_ID streamID;
+
+    busy = (raw_htc_buffer *)pPacket->pPktContext;
+    A_ASSERT(busy != NULL);
+
+    if (pPacket->Status == A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        return;
+    }
+
+    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+   if (down_trylock(&ar->raw_htc_read_sem[streamID])) {
+#else
+    if (down_interruptible(&ar->raw_htc_read_sem[streamID])) {
+#endif /* CF */
+        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+    }
+
+    A_ASSERT((pPacket->Status != A_OK) ||
+             (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN)));
+
+    busy->length = pPacket->ActualLength + HTC_HEADER_LEN;
+    busy->currPtr = HTC_HEADER_LEN;
+    ar->read_buffer_available[streamID] = TRUE;
+    //AR_DEBUG_PRINTF("raw read cb:  0x%X 0x%X \n", busy->currPtr,busy->length);
+    up(&ar->raw_htc_read_sem[streamID]);
+
+    /* Signal the waiting process */
+    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID);
+    wake_up_interruptible(&ar->raw_htc_read_queue[streamID]);
+}
+
+static void
+ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T          *ar = (AR_SOFTC_T  *)Context;
+    raw_htc_buffer      *free;
+    HTC_RAW_STREAM_ID   streamID;
+
+    free = (raw_htc_buffer *)pPacket->pPktContext;
+    A_ASSERT(free != NULL);
+
+    if (pPacket->Status == A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        return;
+    }
+
+    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+    if (down_trylock(&ar->raw_htc_write_sem[streamID])) {
+#else
+    if (down_interruptible(&ar->raw_htc_write_sem[streamID])) {
+#endif
+        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+    }
+
+    A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN));
+
+    free->length = 0;
+    ar->write_buffer_available[streamID] = TRUE;
+    up(&ar->raw_htc_write_sem[streamID]);
+
+    /* Signal the waiting process */
+    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID);
+    wake_up_interruptible(&ar->raw_htc_write_queue[streamID]);
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T        *ar,
+                                           HTC_RAW_STREAM_ID StreamID)
+{
+    A_STATUS                 status;
+    HTC_SERVICE_CONNECT_RESP response;
+    A_UINT8                  streamNo;
+    HTC_SERVICE_CONNECT_REQ  connect;
+
+    do {
+
+        A_MEMZERO(&connect,sizeof(connect));
+            /* pass the stream ID as meta data to the RAW streams service */
+        streamNo = (A_UINT8)StreamID;
+        connect.pMetaData = &streamNo;
+        connect.MetaDataLength = sizeof(A_UINT8);
+            /* these fields are the same for all endpoints */
+        connect.EpCallbacks.pContext = ar;
+        connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb;
+        connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb;
+            /* simple interface, we don't need these optional callbacks */
+        connect.EpCallbacks.EpRecvRefill = NULL;
+        connect.EpCallbacks.EpSendFull = NULL;
+        connect.EpCallbacks.EpSendAvail = NULL;
+        connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM;
+
+            /* connect to the raw streams service, we may be able to get 1 or more
+             * connections, depending on WHAT is running on the target */
+        connect.ServiceID = HTC_RAW_STREAMS_SVC;
+
+        A_MEMZERO(&response,sizeof(response));
+
+            /* try to connect to the raw stream, it is okay if this fails with
+             * status HTC_SERVICE_NO_MORE_EP */
+        status = HTCConnectService(ar->arHtcTarget,
+                                   &connect,
+                                   &response);
+
+        if (A_FAILED(status)) {
+            if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) {
+                AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n");
+                status = A_OK;
+            }
+            break;
+        }
+
+            /* set endpoint mapping for the RAW HTC streams */
+        arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint);
+
+        AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n",
+                        StreamID, arRawStream2EndpointID(ar,StreamID));
+
+    } while (FALSE);
+
+    return status;
+}
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar)
+{
+    A_STATUS status;
+    int streamID, endPt, count2;
+    raw_htc_buffer *buffer;
+    HTC_SERVICE_ID servicepriority;
+
+    A_ASSERT(ar->arHtcTarget != NULL);
+
+        /* wait for target */
+    status = HTCWaitTarget(ar->arHtcTarget);
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status);
+        return -ENODEV;
+    }
+
+    for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) {
+        ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED;
+    }
+
+    for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) {
+        /* Initialize the data structures */
+        init_MUTEX(&ar->raw_htc_read_sem[streamID]);
+        init_MUTEX(&ar->raw_htc_write_sem[streamID]);
+        init_waitqueue_head(&ar->raw_htc_read_queue[streamID]);
+        init_waitqueue_head(&ar->raw_htc_write_queue[streamID]);
+
+            /* try to connect to the raw service */
+        status = ar6000_connect_raw_service(ar,streamID);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (arRawStream2EndpointID(ar,streamID) == 0) {
+            break;
+        }
+
+        for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) {
+            /* Initialize the receive buffers */
+            buffer = ar->raw_htc_write_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+            buffer = ar->raw_htc_read_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+
+            SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket,
+                                          buffer,
+                                          buffer->data,
+                                          AR6000_BUFFER_SIZE,
+                                          arRawStream2EndpointID(ar,streamID));
+
+            /* Queue buffers to HTC for receive */
+            if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK)
+            {
+                BMIInit();
+                return -EIO;
+            }
+        }
+
+        for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) {
+            /* Initialize the receive buffers */
+            buffer = ar->raw_htc_write_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+        }
+
+        ar->read_buffer_available[streamID] = FALSE;
+        ar->write_buffer_available[streamID] = TRUE;
+    }
+
+    if (A_FAILED(status)) {
+        return -EIO;
+    }
+
+    AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID);
+
+    servicepriority = HTC_RAW_STREAMS_SVC;  /* only 1 */
+
+        /* set callbacks and priority list */
+    HTCSetCreditDistribution(ar->arHtcTarget,
+                             ar,
+                             NULL,  /* use default */
+                             NULL,  /* use default */
+                             &servicepriority,
+                             1);
+
+    /* Start the HTC component */
+    if ((status = HTCStart(ar->arHtcTarget)) != A_OK) {
+        BMIInit();
+        return -EIO;
+    }
+
+    (ar)->arRawIfInit = TRUE;
+
+    return 0;
+}
+
+int ar6000_htc_raw_close(AR_SOFTC_T *ar)
+{
+    A_PRINTF("ar6000_htc_raw_close called \n");
+    HTCStop(ar->arHtcTarget);
+
+        /* reset the device */
+    ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+    /* Initialize the BMI component */
+    BMIInit();
+
+    return 0;
+}
+
+raw_htc_buffer *
+get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID)
+{
+    int count;
+    raw_htc_buffer *busy;
+
+    /* Check for data */
+    for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) {
+        busy = ar->raw_htc_read_buffer[StreamID][count];
+        if (busy->length) {
+            break;
+        }
+    }
+    if (busy->length) {
+        ar->read_buffer_available[StreamID] = TRUE;
+    } else {
+        ar->read_buffer_available[StreamID] = FALSE;
+    }
+
+    return busy;
+}
+
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+                            char __user *buffer, size_t length)
+{
+    int readPtr;
+    raw_htc_buffer *busy;
+
+    if (arRawStream2EndpointID(ar,StreamID) == 0) {
+        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+        return -EFAULT;
+    }
+
+    if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+        return -ERESTARTSYS;
+    }
+
+    busy = get_filled_buffer(ar,StreamID);
+    while (!ar->read_buffer_available[StreamID]) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+
+        /* Wait for the data */
+        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID);
+        if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID],
+                                     ar->read_buffer_available[StreamID]))
+        {
+            return -EINTR;
+        }
+        if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+            return -ERESTARTSYS;
+        }
+        busy = get_filled_buffer(ar,StreamID);
+    }
+
+    /* Read the data */
+    readPtr = busy->currPtr;
+    if (length > busy->length - HTC_HEADER_LEN) {
+        length = busy->length - HTC_HEADER_LEN;
+    }
+    if (copy_to_user(buffer, &busy->data[readPtr], length)) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+        return -EFAULT;
+    }
+
+    busy->currPtr += length;
+
+    //AR_DEBUG_PRINTF("raw read ioctl:  currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length);
+
+    if (busy->currPtr == busy->length)
+    {
+        busy->currPtr = 0;
+        busy->length = 0;
+        HTC_PACKET_RESET_RX(&busy->HTCPacket);
+        //AR_DEBUG_PRINTF("raw read ioctl:  ep for packet:%d \n", busy->HTCPacket.Endpoint);
+        HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket);
+    }
+    ar->read_buffer_available[StreamID] = FALSE;
+    up(&ar->raw_htc_read_sem[StreamID]);
+
+    return length;
+}
+
+static raw_htc_buffer *
+get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID)
+{
+    int count;
+    raw_htc_buffer *free;
+
+    free = NULL;
+    for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) {
+        free = ar->raw_htc_write_buffer[StreamID][count];
+        if (free->length == 0) {
+            break;
+        }
+    }
+    if (!free->length) {
+        ar->write_buffer_available[StreamID] = TRUE;
+    } else {
+        ar->write_buffer_available[StreamID] = FALSE;
+    }
+
+    return free;
+}
+
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+                     char __user *buffer, size_t length)
+{
+    int writePtr;
+    raw_htc_buffer *free;
+
+    if (arRawStream2EndpointID(ar,StreamID) == 0) {
+        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+        return -EFAULT;
+    }
+
+    if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+        return -ERESTARTSYS;
+    }
+
+    /* Search for a free buffer */
+    free = get_free_buffer(ar,StreamID);
+
+    /* Check if there is space to write else wait */
+    while (!ar->write_buffer_available[StreamID]) {
+        up(&ar->raw_htc_write_sem[StreamID]);
+
+        /* Wait for buffer to become free */
+        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID);
+        if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID],
+                                     ar->write_buffer_available[StreamID]))
+        {
+            return -EINTR;
+        }
+        if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+            return -ERESTARTSYS;
+        }
+        free = get_free_buffer(ar,StreamID);
+    }
+
+    /* Send the data */
+    writePtr = HTC_HEADER_LEN;
+    if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) {
+        length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN;
+    }
+
+    if (copy_from_user(&free->data[writePtr], buffer, length)) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+        return -EFAULT;
+    }
+
+    free->length = length;
+
+    SET_HTC_PACKET_INFO_TX(&free->HTCPacket,
+                           free,
+                           &free->data[writePtr],
+                           length,
+                           arRawStream2EndpointID(ar,StreamID),
+                           AR6K_DATA_PKT_TAG);
+
+    HTCSendPkt(ar->arHtcTarget,&free->HTCPacket);
+
+    ar->write_buffer_available[StreamID] = FALSE;
+    up(&ar->raw_htc_write_sem[StreamID]);
+
+    return length;
+}
+#endif /* HTC_RAW_INTERFACE */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6xapi_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6xapi_linux.h
new file mode 100644
index 0000000..b8e6e09
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ar6xapi_linux.h
@@ -0,0 +1,128 @@
+#ifndef _AR6XAPI_LINUX_H
+#define _AR6XAPI_LINUX_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ar6_softc;
+
+void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap);
+A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt);
+A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID);
+void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel,
+                          A_UINT8 *bssid, A_UINT16 listenInterval,
+                          A_UINT16 beaconInterval, NETWORK_TYPE networkType,
+                          A_UINT8 beaconIeLen, A_UINT8 assocReqLen,
+                          A_UINT8 assocRespLen,A_UINT8 *assocInfo);
+void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason,
+                             A_UINT8 *bssid, A_UINT8 assocRespLen,
+                             A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus);
+void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid,
+                              A_BOOL ismcast);
+void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps);
+void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList);
+void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode);
+void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr);
+void ar6000_keepalive_rx(void *devt, A_UINT8 configured);
+void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps,
+                                 WMI_NEIGHBOR_INFO *info);
+void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num);
+void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status);
+void ar6000_targetStats_event(struct ar6_softc *ar,  WMI_TARGET_STATS *pStats);
+void ar6000_rssiThreshold_event(struct ar6_softc *ar,
+                                WMI_RSSI_THRESHOLD_VAL newThreshold,
+                                A_INT16 rssi);
+void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal);
+void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication,
+                                A_UINT8 statusCode, A_UINT8 *tspecSuggestion);
+void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source);
+void
+ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl);
+
+void
+ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p);
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters,
+                      WMI_GET_WOW_LIST_REPLY *wow_reply);
+
+void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID,
+                             WMI_PMKID *pmkidList);
+
+void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
+void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
+void ar6000_gpio_ack_rx(void);
+
+void ar6000_dbglog_init_done(struct ar6_softc *ar);
+
+#ifdef SEND_EVENT_TO_APP
+void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len);
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len);
+#endif
+
+void ar6000_tx_retry_err_event(void *devt);
+
+void ar6000_snrThresholdEvent_rx(void *devt,
+                                 WMI_SNR_THRESHOLD_VAL newThreshold,
+                                 A_UINT8 snr);
+
+void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal);
+
+
+void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask);
+
+A_STATUS ar6000_get_driver_cfg(struct net_device *dev,
+                                A_UINT16 cfgParam,
+                                void *result);
+void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len);
+
+void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped,
+                         A_INT8 *buffer, A_UINT32 length);
+
+int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar);
+
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active);
+
+void ar6000_dset_open_req(void *devt,
+                          A_UINT32 id,
+                          A_UINT32 targ_handle,
+                          A_UINT32 targ_reply_fn,
+                          A_UINT32 targ_reply_arg);
+void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
+void ar6000_dset_data_req(void *devt,
+                          A_UINT32 access_cookie,
+                          A_UINT32 offset,
+                          A_UINT32 length,
+                          A_UINT32 targ_buf,
+                          A_UINT32 targ_reply_fn,
+                          A_UINT32 targ_reply_arg);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athdrv_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athdrv_linux.h
new file mode 100644
index 0000000..9c3e449
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athdrv_linux.h
@@ -0,0 +1,993 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_LINUX_H
+#define _ATHDRV_LINUX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * There are two types of ioctl's here: Standard ioctls and
+ * eXtended ioctls.  All extended ioctls (XIOCTL) are multiplexed
+ * off of the single ioctl command, AR6000_IOCTL_EXTENDED.  The
+ * arguments for every XIOCTL starts with a 32-bit command word
+ * that is used to select which extended ioctl is in use.  After
+ * the command word are command-specific arguments.
+ */
+
+/* Linux standard Wireless Extensions, private ioctl interfaces */
+#define IEEE80211_IOCTL_SETPARAM             (SIOCIWFIRSTPRIV+0)
+#define IEEE80211_IOCTL_GETPARAM             (SIOCIWFIRSTPRIV+1)
+#define IEEE80211_IOCTL_SETKEY               (SIOCIWFIRSTPRIV+2)
+#define IEEE80211_IOCTL_SETWMMPARAMS         (SIOCIWFIRSTPRIV+3)
+#define IEEE80211_IOCTL_DELKEY               (SIOCIWFIRSTPRIV+4)
+#define IEEE80211_IOCTL_GETWMMPARAMS         (SIOCIWFIRSTPRIV+5)
+#define IEEE80211_IOCTL_SETOPTIE             (SIOCIWFIRSTPRIV+6)
+#define IEEE80211_IOCTL_SETMLME              (SIOCIWFIRSTPRIV+7)
+//#define IEEE80211_IOCTL_GETOPTIE             (SIOCIWFIRSTPRIV+7)
+#define IEEE80211_IOCTL_ADDPMKID             (SIOCIWFIRSTPRIV+8)
+//#define IEEE80211_IOCTL_SETAUTHALG           (SIOCIWFIRSTPRIV+10)
+#define IEEE80211_IOCTL_LASTONE              (SIOCIWFIRSTPRIV+9)
+
+
+
+/*                      ====WMI Ioctls====                                    */
+/*
+ *
+ * Many ioctls simply provide WMI services to application code:
+ * an application makes such an ioctl call with a set of arguments
+ * that are packaged into the corresponding WMI message, and sent
+ * to the Target.
+ */
+
+#define AR6000_IOCTL_WMI_GETREV              (SIOCIWFIRSTPRIV+10)
+/*
+ * arguments:
+ *   ar6000_version *revision
+ */
+
+#define AR6000_IOCTL_WMI_SETPWR              (SIOCIWFIRSTPRIV+11)
+/*
+ * arguments:
+ *   WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
+ * uses: WMI_SET_POWER_MODE_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETSCAN             (SIOCIWFIRSTPRIV+12)
+/*
+ * arguments:
+ *   WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
+ * uses: WMI_SET_SCAN_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETLISTENINT        (SIOCIWFIRSTPRIV+13)
+/*
+ * arguments:
+ *   UINT32 listenInterval
+ * uses: WMI_SET_LISTEN_INT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETBSSFILTER        (SIOCIWFIRSTPRIV+14)
+/*
+ * arguments:
+ *   WMI_BSS_FILTER filter (see include/wmi.h)
+ * uses: WMI_SET_BSS_FILTER_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS   (SIOCIWFIRSTPRIV+16)
+/*
+ * arguments:
+ *   WMI_CHANNEL_PARAMS_CMD chParams
+ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PROBEDSSID      (SIOCIWFIRSTPRIV+17)
+/*
+ * arguments:
+ *   WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
+ * uses: WMI_SETPROBED_SSID_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PMPARAMS        (SIOCIWFIRSTPRIV+18)
+/*
+ * arguments:
+ *   WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
+ * uses: WMI_SET_POWER_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BADAP           (SIOCIWFIRSTPRIV+19)
+/*
+ * arguments:
+ *   WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
+ * uses: WMI_ADD_BAD_AP_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_QOS_QUEUE       (SIOCIWFIRSTPRIV+20)
+/*
+ * arguments:
+ *   ar6000_queuereq queueRequest (see below)
+ */
+
+#define AR6000_IOCTL_WMI_CREATE_QOS          (SIOCIWFIRSTPRIV+21)
+/*
+ * arguments:
+ *   WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
+ * uses: WMI_CREATE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_DELETE_QOS          (SIOCIWFIRSTPRIV+22)
+/*
+ * arguments:
+ *   WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
+ * uses: WMI_DELETE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD   (SIOCIWFIRSTPRIV+23)
+/*
+ * arguments:
+ *   WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
+/*
+ * arguments:
+ *   WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
+ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_TARGET_STATS    (SIOCIWFIRSTPRIV+25)
+/*
+ * arguments:
+ *   TARGET_STATS *targetStats (see below)
+ * uses: WMI_GET_STATISTICS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ASSOC_INFO      (SIOCIWFIRSTPRIV+26)
+/*
+ * arguments:
+ *   WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
+ * uses: WMI_SET_ASSOC_INFO_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS   (SIOCIWFIRSTPRIV+27)
+/*
+ * arguments:
+ *   WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
+ * uses: WMI_SET_ACCESS_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BMISS_TIME      (SIOCIWFIRSTPRIV+28)
+/*
+ * arguments:
+ *   UINT32 beaconMissTime
+ * uses: WMI_SET_BMISS_TIME_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT    (SIOCIWFIRSTPRIV+29)
+/*
+ * arguments:
+ *   WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
+ * uses: WMI_SET_DISC_TIMEOUT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS    (SIOCIWFIRSTPRIV+30)
+/*
+ * arguments:
+ *   WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
+ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
+ */
+
+/*
+ * There is a very small space available for driver-private
+ * wireless ioctls.  In order to circumvent this limitation,
+ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
+ * single AR6000_IOCTL_EXTENDED ioctl.
+ */
+#define AR6000_IOCTL_EXTENDED                (SIOCIWFIRSTPRIV+31)
+
+
+/*                         ====BMI Extended Ioctls====                        */
+
+#define AR6000_XIOCTL_BMI_DONE                                  1
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
+ * uses: BMI_DONE
+ */
+
+#define AR6000_XIOCTL_BMI_READ_MEMORY                           2
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
+ *       UINT32 address
+ *       UINT32 length
+ *     }
+ *     char results[length]
+ *   }
+ * uses: BMI_READ_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_MEMORY                          3
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
+ *   UINT32 address
+ *   UINT32 length
+ *   char data[length]
+ * uses: BMI_WRITE_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_EXECUTE                               4
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
+ *   UINT32 TargetAddress
+ *   UINT32 parameter
+ * uses: BMI_EXECUTE
+ */
+
+#define AR6000_XIOCTL_BMI_SET_APP_START                         5
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
+ *   UINT32 TargetAddress
+ * uses: BMI_SET_APP_START
+ */
+
+#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER                     6
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *     }
+ *     UINT32 result
+ *   }
+ * uses: BMI_READ_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER                    7
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *       UINT32 newValue
+ *     }
+ * uses: BMI_WRITE_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_TEST                                  8
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
+ *   UINT32 address
+ *   UINT32 length
+ *   UINT32 count
+ */
+
+
+
+/* Historical Host-side DataSet support */
+#define AR6000_XIOCTL_UNUSED9                                   9
+#define AR6000_XIOCTL_UNUSED10                                  10
+#define AR6000_XIOCTL_UNUSED11                                  11
+
+/*                      ====Misc Extended Ioctls====                          */
+
+#define AR6000_XIOCTL_FORCE_TARGET_RESET                        12
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
+ */
+
+
+#ifdef HTC_RAW_INTERFACE
+/* HTC Raw Interface Ioctls */
+#define AR6000_XIOCTL_HTC_RAW_OPEN                              13
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_CLOSE                             14
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_READ                              15
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
+ *       UINT32 mailboxID
+ *       UINT32 length
+ *     }
+ *     results[length]
+ *   }
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_WRITE                             16
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
+ *   UINT32 mailboxID
+ *   UINT32 length
+ *   char buffer[length]
+ */
+#endif /* HTC_RAW_INTERFACE */
+
+#define AR6000_XIOCTL_CHECK_TARGET_READY                        17
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
+ */
+
+
+
+/*                ====GPIO (General Purpose I/O) Extended Ioctls====          */
+
+#define AR6000_XIOCTL_GPIO_OUTPUT_SET                           18
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
+ *   ar6000_gpio_output_set_cmd_s (see below)
+ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INPUT_GET                            19
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
+ * uses: WMIX_GPIO_INPUT_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_SET                         20
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
+ *   ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_GET                         21
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
+ *   ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_ACK                             22
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
+ *   ar6000_cpio_intr_ack_cmd_s (see below)
+ * uses: WMIX_GPIO_INTR_ACK_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_WAIT                            23
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
+ */
+
+
+
+/*                    ====more wireless commands====                          */
+
+#define AR6000_XIOCTL_SET_ADHOC_BSSID                           24
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
+ *   WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
+ */
+
+#define AR6000_XIOCTL_SET_OPT_MODE                              25
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
+ *   WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
+ * uses: WMI_SET_OPT_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_OPT_SEND_FRAME                            26
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
+ *   WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
+ * uses: WMI_OPT_TX_FRAME_CMDID
+ */
+
+#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL                   27
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
+ *   WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
+ * uses: WMI_SET_BEACON_INT_CMDID
+ */
+
+
+#define IEEE80211_IOCTL_SETAUTHALG                              28
+
+
+#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE                        29
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
+ *   WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
+ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+
+
+#define AR6000_XIOCTL_SET_MAX_SP                                30
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
+ *   WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
+ * uses: WMI_SET_MAX_SP_LEN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_TBL                          31
+
+#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL                         32
+
+#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS                 33
+
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
+ *   WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
+ *   WMI_SET_POWERSAVE_TIMERS_CMDID
+ */
+
+#define AR6000_XIOCTRL_WMI_GET_POWER_MODE                        34
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
+ */
+
+#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE                       35
+typedef enum {
+    WLAN_DISABLED,
+    WLAN_ENABLED
+} AR6000_WLAN_STATE;
+/*
+ * arguments:
+ * enable/disable
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_DATA                         36
+
+#define AR6000_XIOCTL_WMI_SETRETRYLIMITS                37
+/*
+ * arguments:
+ *   WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
+ * uses: WMI_SET_RETRY_LIMITS_CMDID
+ */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/*       ====extended commands for radio test ====                          */
+
+#define AR6000_XIOCTL_TCMD_CONT_TX                      38
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
+ *   WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_TX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_CONT_RX                      39
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
+ *   WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_RX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_PM                           40
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
+ *   WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
+ * uses: WMI_TCMD_PM_CMDID
+ */
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+#define AR6000_XIOCTL_WMI_STARTSCAN                     41
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
+ *   UINT8  scanType
+ *   UINT8  scanConnected
+ *   A_BOOL forceFgScan
+ * uses: WMI_START_SCAN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SETFIXRATES                   42
+
+#define AR6000_XIOCTL_WMI_GETFIXRATES                   43
+
+
+#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD             44
+/*
+ * arguments:
+ *   WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_CLR_RSSISNR                   45
+/*
+ * arguments:
+ *   WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_CLR_RSSISNR_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD               46
+/*
+ * arguments:
+ *   WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_RTS                        47
+/*
+ * arguments:
+ *   WMI_SET_RTS_MODE_CMD (see include/wmi.h)
+ * uses: WMI_SET_RTS_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LPREAMBLE                 48
+
+#define AR6000_XIOCTL_WMI_SET_AUTHMODE                  49
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
+ *   UINT8  mode
+ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_REASSOCMODE               50
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
+ *   UINT8  mode
+ * uses: WMI_SET_WMM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_WMM                       51
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
+ * UINT32 frequency
+ * UINT8  threshold
+ */
+#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS  52
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
+ * UINT32 cookie
+ */
+#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP         53
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
+ *   UINT32 regDomain
+ */
+#define AR6000_XIOCTL_WMI_GET_RD                        54
+
+#define AR6000_XIOCTL_DIAG_READ                         55
+
+#define AR6000_XIOCTL_DIAG_WRITE                        56
+
+/*
+ * arguments cmd (AR6000_XIOCTL_SET_TXOP)
+ * WMI_TXOP_CFG  txopEnable
+ */
+#define AR6000_XIOCTL_WMI_SET_TXOP                      57
+
+#ifdef USER_KEYS
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
+ * UINT32 keyOpCtrl
+ * uses AR6000_USER_SETKEYS_INFO
+ */
+#define AR6000_XIOCTL_USER_SETKEYS                      58
+#endif /* USER_KEYS */
+
+#define AR6000_XIOCTL_WMI_SET_KEEPALIVE                 59
+/*
+ * arguments:
+ *   UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
+ *   UINT8 keepaliveInterval
+ * uses: WMI_SET_KEEPALIVE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_KEEPALIVE                 60
+/*
+ * arguments:
+ *   UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
+ *   UINT8 keepaliveInterval
+ *   A_BOOL configured
+ * uses: WMI_GET_KEEPALIVE_CMDID
+ */
+
+/*               ====ROM Patching Extended Ioctls====                       */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL              61
+/*
+ * arguments:
+ *     union {
+ *       struct {
+ *         UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
+ *         UINT32 ROM Address
+ *         UINT32 RAM Address
+ *         UINT32 number of bytes
+ *         UINT32 activate? (0 or 1)
+ *       }
+ *       A_UINT32 resulting rompatch ID
+ *     }
+ * uses: BMI_ROMPATCH_INSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL            62
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
+ *       UINT32 rompatch ID
+ *     }
+ * uses: BMI_ROMPATCH_UNINSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE             63
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
+ *       UINT32 rompatch count
+ *       UINT32 rompatch IDs[rompatch count]
+ *     }
+ * uses: BMI_ROMPATCH_ACTIVATE
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE           64
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
+ *       UINT32 rompatch count
+ *       UINT32 rompatch IDs[rompatch count]
+ *     }
+ * uses: BMI_ROMPATCH_DEACTIVATE
+ */
+
+#define AR6000_XIOCTL_WMI_SET_APPIE             65
+/*
+ * arguments:
+ *      struct {
+ *          UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
+ *          UINT32  app_frmtype;
+ *          UINT32  app_buflen;
+ *          UINT8   app_buf[];
+ *      }
+ */
+#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER    66
+/*
+ * arguments:
+ *      A_UINT32 filter_type;
+ */
+
+#define AR6000_XIOCTL_DBGLOG_CFG_MODULE             67
+
+#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS         68
+
+#define AR6000_XIOCTL_WMI_SET_WSC_STATUS    		70
+/*
+ * arguments:
+ *      A_UINT32 wsc_status;
+ *            (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
+ */
+
+/*
+ * arguments:
+ *      struct {
+ *          A_UINT8 streamType;
+ *          A_UINT8 status;
+ *      }
+ * uses: WMI_SET_BT_STATUS_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_STATUS             71
+
+/*
+ * arguments:
+ *      struct {
+ *           A_UINT8 paramType;
+ *           union {
+ *               A_UINT8 noSCOPkts;
+ *               BT_PARAMS_A2DP a2dpParams;
+ *               BT_COEX_REGS regs;
+ *           };
+ *      }
+ * uses: WMI_SET_BT_PARAM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_PARAMS             72
+
+#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE       73
+#define AR6000_XIOCTL_WMI_SET_WOW_MODE              74
+#define AR6000_XIOCTL_WMI_GET_WOW_LIST              75
+#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN           76
+#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN           77
+
+
+
+#define AR6000_XIOCTL_TARGET_INFO                   78
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
+ *   A_UINT32 TargetVersion (returned)
+ *   A_UINT32 TargetType    (returned)
+ * (See also bmi_msg.h target_ver and target_type)
+ */
+
+#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE         79
+/*
+ * arguments:
+ *      none
+ */
+
+#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE       80
+/*
+ * This ioctl is used to emulate traffic activity
+ * timeouts.  Activity/inactivity will trigger the driver
+ * to re-balance credits.
+ *
+ * arguments:
+ *      ar6000_traffic_activity_change
+ */
+
+#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS    81
+/*
+ * This ioctl is used to set the connect control flags
+ *
+ * arguments:
+ *      A_UINT32 connectCtrlFlags
+ */
+
+#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS              82
+/*
+ * This IOCTL sets any Authentication,Key Management and Protection
+ * related parameters. This is used along with the information set in
+ * Connect Command.
+ * Currently this enables Multiple PMKIDs to an AP.
+ *
+ * arguments:
+ *      struct {
+ *          A_UINT32    akmpInfo;
+ *      }
+ * uses: WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define AR6000_XIOCTL_WMI_GET_PMKID_LIST            83
+
+#define AR6000_XIOCTL_WMI_SET_PMKID_LIST            84
+/*
+ * This IOCTL is used to set a list of PMKIDs. This list of
+ * PMKIDs is used in the [Re]AssocReq Frame. This list is used
+ * only if the MultiPMKID option is enabled via the
+ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS  IOCTL.
+ *
+ * arguments:
+ *      struct {
+ *          A_UINT32    numPMKID;
+ *          WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
+ *      }
+ * uses: WMI_SET_PMKIDLIST_CMD
+ */
+
+/* Historical DSETPATCH support for INI patches */
+#define AR6000_XIOCTL_UNUSED90                      90
+
+
+
+/* used by AR6000_IOCTL_WMI_GETREV */
+struct ar6000_version {
+    A_UINT32        host_ver;
+    A_UINT32        target_ver;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
+struct ar6000_queuereq {
+    A_UINT8         trafficClass;
+    A_UINT16        activeTsids;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
+typedef struct targetStats_t {
+    A_UINT64    tx_packets;
+    A_UINT64    tx_bytes;
+    A_UINT64    tx_unicast_pkts;
+    A_UINT64    tx_unicast_bytes;
+    A_UINT64    tx_multicast_pkts;
+    A_UINT64    tx_multicast_bytes;
+    A_UINT64    tx_broadcast_pkts;
+    A_UINT64    tx_broadcast_bytes;
+    A_UINT64    tx_rts_success_cnt;
+    A_UINT64    tx_packet_per_ac[4];
+
+    A_UINT64    tx_errors;
+    A_UINT64    tx_failed_cnt;
+    A_UINT64    tx_retry_cnt;
+    A_UINT64    tx_rts_fail_cnt;
+    A_INT32     tx_unicast_rate;
+    A_UINT64    rx_packets;
+    A_UINT64    rx_bytes;
+    A_UINT64    rx_unicast_pkts;
+    A_UINT64    rx_unicast_bytes;
+    A_UINT64    rx_multicast_pkts;
+    A_UINT64    rx_multicast_bytes;
+    A_UINT64    rx_broadcast_pkts;
+    A_UINT64    rx_broadcast_bytes;
+    A_UINT64    rx_fragment_pkt;
+
+    A_UINT64    rx_errors;
+    A_UINT64    rx_crcerr;
+    A_UINT64    rx_key_cache_miss;
+    A_UINT64    rx_decrypt_err;
+    A_UINT64    rx_duplicate_frames;
+    A_INT32     rx_unicast_rate;
+
+    A_UINT64    tkip_local_mic_failure;
+    A_UINT64    tkip_counter_measures_invoked;
+    A_UINT64    tkip_replays;
+    A_UINT64    tkip_format_errors;
+    A_UINT64    ccmp_format_errors;
+    A_UINT64    ccmp_replays;
+
+    A_UINT64    power_save_failure_cnt;
+    A_INT16     noise_floor_calibation;
+
+    A_UINT64    cs_bmiss_cnt;
+    A_UINT64    cs_lowRssi_cnt;
+    A_UINT64    cs_connect_cnt;
+    A_UINT64    cs_disconnect_cnt;
+    A_UINT8     cs_aveBeacon_snr;
+    A_INT16     cs_aveBeacon_rssi;
+    A_UINT8     cs_lastRoam_msec;
+    A_UINT8     cs_snr;
+    A_INT16     cs_rssi;
+
+    A_UINT32    lq_val;
+
+    A_UINT32    wow_num_pkts_dropped;
+    A_UINT8     wow_num_host_pkt_wakeups;
+    A_UINT8     wow_num_host_event_wakeups;
+    A_UINT16    wow_num_events_discarded;
+
+}TARGET_STATS;
+
+typedef struct targetStats_cmd_t {
+    TARGET_STATS targetStats;
+    int clearStats;
+} TARGET_STATS_CMD;
+
+/* used by AR6000_XIOCTL_USER_SETKEYS */
+
+/*
+ * Setting this bit to 1 doesnot initialize the RSC on the firmware
+ */
+#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL    1
+#define AR6000_USER_SETKEYS_RSC_UNCHANGED     0x00000002
+
+typedef struct {
+    A_UINT32  keyOpCtrl;  /* Bit Map of Key Mgmt Ctrl Flags */
+} AR6000_USER_SETKEYS_INFO;
+
+
+/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
+struct ar6000_gpio_output_set_cmd_s {
+    A_UINT32 set_mask;
+    A_UINT32 clear_mask;
+    A_UINT32 enable_mask;
+    A_UINT32 disable_mask;
+};
+
+/*
+ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
+ */
+struct ar6000_gpio_register_cmd_s {
+    A_UINT32 gpioreg_id;
+    A_UINT32 value;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
+struct ar6000_gpio_intr_ack_cmd_s {
+    A_UINT32 ack_mask;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
+struct ar6000_gpio_intr_wait_cmd_s {
+    A_UINT32 intr_mask;
+    A_UINT32 input_values;
+};
+
+/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
+typedef struct ar6000_dbglog_module_config_s {
+    A_UINT32 valid;
+    A_UINT16 mmask;
+    A_UINT16 tsr;
+    A_BOOL   rep;
+    A_UINT16 size;
+} DBGLOG_MODULE_CONFIG;
+
+typedef struct user_rssi_thold_t {
+    A_INT16     tag;
+    A_INT16     rssi;
+} USER_RSSI_THOLD;
+
+typedef struct user_rssi_params_t {
+    A_UINT8            weight;
+    A_UINT32           pollTime;
+    USER_RSSI_THOLD    tholds[12];
+} USER_RSSI_PARAMS;
+
+/*
+ * Host driver may have some config parameters. Typically, these
+ * config params are one time config parameters. These could
+ * correspond to any of the underlying modules. Host driver exposes
+ * an api for the underlying modules to get this config.
+ */
+#define AR6000_DRIVER_CFG_BASE                  0x8000
+
+/* Should driver perform wlan node caching? */
+#define AR6000_DRIVER_CFG_GET_WLANNODECACHING   0x8001
+/*Should we log raw WMI msgs */
+#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS      0x8002
+
+/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
+struct ar6000_diag_window_cmd_s {
+    unsigned int addr;
+    unsigned int value;
+};
+
+
+struct ar6000_traffic_activity_change {
+    A_UINT32    StreamID;   /* stream ID to indicate activity change */
+    A_UINT32    Active;     /* active (1) or inactive (0) */
+};
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athtypes_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athtypes_linux.h
new file mode 100644
index 0000000..3e91de3
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/athtypes_linux.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHTYPES_LINUX_H_
+#define _ATHTYPES_LINUX_H_
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+typedef int8_t      A_INT8;
+typedef int16_t     A_INT16;
+typedef int32_t     A_INT32;
+typedef int64_t     A_INT64;
+
+typedef u_int8_t     A_UINT8;
+typedef u_int16_t    A_UINT16;
+typedef u_int32_t    A_UINT32;
+typedef u_int64_t    A_UINT64;
+
+typedef int             A_BOOL;
+typedef char            A_CHAR;
+typedef unsigned char   A_UCHAR;
+typedef unsigned long   A_ATH_TIMER;
+
+
+#endif /* _ATHTYPES_LINUX_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/config_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/config_linux.h
new file mode 100644
index 0000000..11a691d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/config_linux.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _CONFIG_LINUX_H_
+#define _CONFIG_LINUX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Host-side GPIO support is optional.
+ * If run-time access to GPIO pins is not required, then
+ * this should be changed to #undef.
+ */
+#define CONFIG_HOST_GPIO_SUPPORT
+
+/*
+ * Host side Test Command support
+ */
+#define CONFIG_HOST_TCMD_SUPPORT
+
+#define USE_4BYTE_REGISTER_ACCESS
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/debug_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/debug_linux.h
new file mode 100644
index 0000000..c74e1df
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/debug_linux.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _DEBUG_LINUX_H_
+#define _DEBUG_LINUX_H_
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+extern A_UINT32 g_dbg_flags;
+
+#define DBGFMT  "%s() : "
+#define DBGARG  __func__
+#define DBGFN	A_PRINTF
+
+/* ------- Debug related stuff ------- */
+enum {
+    ATH_DEBUG_SEND = 0x0001,
+    ATH_DEBUG_RECV = 0x0002,
+    ATH_DEBUG_SYNC = 0x0004,
+    ATH_DEBUG_DUMP = 0x0008,
+    ATH_DEBUG_IRQ  = 0x0010,
+    ATH_DEBUG_TRC  = 0x0020,
+    ATH_DEBUG_WARN = 0x0040,
+    ATH_DEBUG_ERR  = 0x0080,
+    ATH_LOG_INF	   = 0x0100,
+    ATH_DEBUG_BMI  = 0x0110,
+    ATH_DEBUG_WMI  = 0x0120,
+    ATH_DEBUG_HIF  = 0x0140,
+    ATH_DEBUG_HTC  = 0x0180,
+    ATH_DEBUG_WLAN = 0x1000,
+    ATH_LOG_ERR	   = 0x1010,
+    ATH_DEBUG_ANY  = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+#define A_DPRINTF(f, a) \
+	if(g_dbg_flags & (f)) \
+	{	\
+		DBGFN a ; \
+	}
+
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
+    if (debughtc & ATH_DEBUG_DUMP) {             \
+        DebugDumpBytes(buffer, length,desc);               \
+    }                                            \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do {        \
+    if (debughtc & (flags)) {                    \
+        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
+    }                                            \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do {               \
+    if (!(test)) {                               \
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
+    }                                            \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#define A_DPRINTF(f, a)
+#endif
+
+#endif /* _DEBUG_LINUX_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ioctl.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ioctl.c
new file mode 100644
index 0000000..0b6e91a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/ioctl.c
@@ -0,0 +1,2540 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
+extern USER_RSSI_THOLD rssi_map[12];
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern int tspecCompliance;
+extern int bmienable;
+extern int bypasswmi;
+
+static int
+ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    /* currently assume only roam times are required */
+    if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) {
+        return -EIO;
+    }
+
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_ROAM_CTRL_CMD cmd;
+    A_UINT8 size = sizeof(cmd);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) {
+        if (cmd.info.bssBiasInfo.numBss > 1) {
+            size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS);
+        }
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_POWERSAVE_TIMERS_POLICY_CMD cmd;
+    A_UINT8 size = sizeof(cmd);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_WMM_CMD cmd;
+    A_STATUS ret;
+
+    if ((dev->flags & IFF_UP) != IFF_UP) {
+        return -EIO;
+    }
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+                                sizeof(cmd)))
+    {
+        return -EFAULT;
+    }
+
+    if (cmd.status == WMI_WMM_ENABLED) {
+        ar->arWmmEnabled = TRUE;
+    } else {
+        ar->arWmmEnabled = FALSE;
+    }
+
+    ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_WMM_TXOP_CMD cmd;
+    A_STATUS ret;
+
+    if ((dev->flags & IFF_UP) != IFF_UP) {
+        return -EIO;
+    }
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+                                sizeof(cmd)))
+    {
+        return -EFAULT;
+    }
+
+    ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_STATUS ret = 0;
+
+    if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1),
+                            &ar->arRegCode, sizeof(ar->arRegCode)))
+        ret = -EFAULT;
+
+    return ret;
+}
+
+
+/* Get power mode command */
+static int
+ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_POWER_MODE_CMD power_mode;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi);
+    if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) {
+        ret = -EFAULT;
+    }
+
+    return ret;
+}
+
+
+static int
+ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_CHANNEL_PARAMS_CMD cmd, *cmdp;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (cmd.numChannels > 1) {
+        cmdp = A_MALLOC(130);
+        if (copy_from_user(cmdp, rq->ifr_data,
+                           sizeof (*cmdp) +
+                           ((cmd.numChannels - 1) * sizeof(A_UINT16))))
+        {
+            kfree(cmdp);
+            return -EFAULT;
+        }
+    } else {
+        cmdp = &cmd;
+    }
+
+    if ((ar->arPhyCapability == WMI_11G_CAPABILITY) &&
+        ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE)))
+    {
+        ret = -EINVAL;
+    }
+
+    if (!ret &&
+        (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode,
+                                   cmdp->numChannels, cmdp->channelList)
+         != A_OK))
+    {
+        ret = -EIO;
+    }
+
+    if (cmd.numChannels > 1) {
+        kfree(cmdp);
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SNR_THRESHOLD_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq)
+{
+#define SWAP_THOLD(thold1, thold2) do { \
+    USER_RSSI_THOLD tmpThold;           \
+    tmpThold.tag = thold1.tag;          \
+    tmpThold.rssi = thold1.rssi;        \
+    thold1.tag = thold2.tag;            \
+    thold1.rssi = thold2.rssi;          \
+    thold2.tag = tmpThold.tag;          \
+    thold2.rssi = tmpThold.rssi;        \
+} while (0)
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_RSSI_THRESHOLD_PARAMS_CMD cmd;
+    USER_RSSI_PARAMS rssiParams;
+    A_INT32 i, j;
+
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) {
+        return -EFAULT;
+    }
+    cmd.weight = rssiParams.weight;
+    cmd.pollTime = rssiParams.pollTime;
+
+    A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map));
+    /*
+     *  only 6 elements, so use bubble sorting, in ascending order
+     */
+    for (i = 5; i > 0; i--) {
+        for (j = 0; j < i; j++) { /* above tholds */
+            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+                return EFAULT;
+            }
+        }
+    }
+    for (i = 11; i > 6; i--) {
+        for (j = 6; j < i; j++) { /* below tholds */
+            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+                return EFAULT;
+            }
+        }
+    }
+
+#ifdef DEBUG
+    for (i = 0; i < 12; i++) {
+        AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n",
+                i, rssi_map[i].tag, i, rssi_map[i].rssi);
+    }
+#endif
+    cmd.thresholdAbove1_Val = rssi_map[0].rssi;
+    cmd.thresholdAbove2_Val = rssi_map[1].rssi;
+    cmd.thresholdAbove3_Val = rssi_map[2].rssi;
+    cmd.thresholdAbove4_Val = rssi_map[3].rssi;
+    cmd.thresholdAbove5_Val = rssi_map[4].rssi;
+    cmd.thresholdAbove6_Val = rssi_map[5].rssi;
+    cmd.thresholdBelow1_Val = rssi_map[6].rssi;
+    cmd.thresholdBelow2_Val = rssi_map[7].rssi;
+    cmd.thresholdBelow3_Val = rssi_map[8].rssi;
+    cmd.thresholdBelow4_Val = rssi_map[9].rssi;
+    cmd.thresholdBelow5_Val = rssi_map[10].rssi;
+    cmd.thresholdBelow6_Val = rssi_map[11].rssi;
+
+    if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_LQ_THRESHOLD_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+
+static int
+ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_PROBED_SSID_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength,
+                                  cmd.ssid) != A_OK)
+    {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_ADD_BAD_AP_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) {
+        return -EIO;
+    }
+
+    if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) {
+        /*
+         * This is a delete badAP.
+         */
+        if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) {
+            ret = -EIO;
+        }
+    } else {
+        if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) {
+            ret = -EIO;
+        }
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_CREATE_PSTREAM_CMD cmd;
+    A_STATUS ret;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_verify_tspec_params(&cmd, tspecCompliance);
+    if (ret == A_OK)
+        ret = wmi_create_pstream_cmd(ar->arWmi, &cmd);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_DELETE_PSTREAM_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ar6000_queuereq qreq;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if( copy_from_user(&qreq, rq->ifr_data,
+                  sizeof(struct ar6000_queuereq)))
+        return -EFAULT;
+
+    qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass);
+
+    if (copy_to_user(rq->ifr_data, &qreq,
+                 sizeof(struct ar6000_queuereq)))
+    {
+        ret = -EFAULT;
+    }
+
+    return ret;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev,
+                                 struct ifreq *rq, A_UINT8 *data, A_UINT32 len)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT32    buf[2];
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    ar->tcmdRxReport = 0;
+    if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        ret = -EINTR;
+    }
+
+    buf[0] = ar->tcmdRxTotalPkt;
+    buf[1] = ar->tcmdRxRssi;
+    if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) {
+        ret = -EFAULT;
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+void
+ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+    TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results;
+
+    ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt;
+    ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm;
+    ar->tcmdRxReport = 1;
+
+    wake_up(&arEvent);
+}
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+static int
+ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_TARGET_ERROR_REPORT_BITMASK cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask);
+
+    return  (ret==0 ? ret : -EINVAL);
+}
+
+static int
+ar6000_clear_target_stats(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+       return -EIO;
+    }
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+    A_MEMZERO(pStats, sizeof(TARGET_STATS));
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+    return ret;
+}
+
+static int
+ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS_CMD cmd;
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+
+    ar->statsUpdatePending = TRUE;
+
+    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        ret = -EINTR;
+    }
+
+    if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) {
+        ret = -EFAULT;
+    }
+
+    if (cmd.clearStats == 1) {
+        ret = ar6000_clear_target_stats(dev);
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_ACCESS_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax,
+                                  cmd.aifsn) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_DISC_TIMEOUT_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_VOICE_PKT_SIZE_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_MAX_SP_LEN_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+
+static int
+ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_BT_STATUS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_BT_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+struct ar6000_gpio_intr_wait_cmd_s  gpio_intr_results;
+/* gpio_reg_results and gpio_data_available are protected by arSem */
+static struct ar6000_gpio_register_cmd_s gpio_reg_results;
+static A_BOOL gpio_data_available; /* Requested GPIO data available */
+static A_BOOL gpio_intr_available; /* GPIO interrupt info available */
+static A_BOOL gpio_ack_received;   /* GPIO ack was received */
+
+/* Host-side initialization for General Purpose I/O support */
+void ar6000_gpio_init(void)
+{
+    gpio_intr_available = FALSE;
+    gpio_data_available = FALSE;
+    gpio_ack_received   = FALSE;
+}
+
+/*
+ * Called when a GPIO interrupt is received from the Target.
+ * intr_values shows which GPIO pins have interrupted.
+ * input_values shows a recent value of GPIO pins.
+ */
+void
+ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values)
+{
+    gpio_intr_results.intr_mask = intr_mask;
+    gpio_intr_results.input_values = input_values;
+    *((volatile A_BOOL *)&gpio_intr_available) = TRUE;
+    wake_up(&arEvent);
+}
+
+/*
+ * This is called when a response is received from the Target
+ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get
+ * call.
+ */
+void
+ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value)
+{
+    gpio_reg_results.gpioreg_id = reg_id;
+    gpio_reg_results.value = value;
+    *((volatile A_BOOL *)&gpio_data_available) = TRUE;
+    wake_up(&arEvent);
+}
+
+/*
+ * This is called when an acknowledgement is received from the Target
+ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set
+ * call.
+ */
+void
+ar6000_gpio_ack_rx(void)
+{
+    gpio_ack_received = TRUE;
+    wake_up(&arEvent);
+}
+
+A_STATUS
+ar6000_gpio_output_set(struct net_device *dev,
+                       A_UINT32 set_mask,
+                       A_UINT32 clear_mask,
+                       A_UINT32 enable_mask,
+                       A_UINT32 disable_mask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_ack_received = FALSE;
+    return wmi_gpio_output_set(ar->arWmi,
+                set_mask, clear_mask, enable_mask, disable_mask);
+}
+
+static A_STATUS
+ar6000_gpio_input_get(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+    return wmi_gpio_input_get(ar->arWmi);
+}
+
+static A_STATUS
+ar6000_gpio_register_set(struct net_device *dev,
+                         A_UINT32 gpioreg_id,
+                         A_UINT32 value)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_ack_received = FALSE;
+    return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value);
+}
+
+static A_STATUS
+ar6000_gpio_register_get(struct net_device *dev,
+                         A_UINT32 gpioreg_id)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+    return wmi_gpio_register_get(ar->arWmi, gpioreg_id);
+}
+
+static A_STATUS
+ar6000_gpio_intr_ack(struct net_device *dev,
+                     A_UINT32 ack_mask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_intr_available = FALSE;
+    return wmi_gpio_intr_ack(ar->arWmi, ack_mask);
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    HIF_DEVICE *hifDevice = ar->arHifDevice;
+    int ret, param, param2;
+    unsigned int address = 0;
+    unsigned int length = 0;
+    unsigned char *buffer;
+    char *userdata;
+    A_UINT32 connectCtrlFlags;
+
+
+    static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+                                           WMI_SHORTSCANRATIO_DEFAULT,
+                                           DEFAULT_SCAN_CTRL_FLAGS,
+                                           0};
+    WMI_SET_AKMP_PARAMS_CMD  akmpParams;
+    WMI_SET_PMKID_LIST_CMD   pmkidInfo;
+
+    if (cmd == AR6000_IOCTL_EXTENDED)
+    {
+        /*
+         * This allows for many more wireless ioctls than would otherwise
+         * be available.  Applications embed the actual ioctl command in
+         * the first word of the parameter block, and use the command
+         * AR6000_IOCTL_EXTENDED_CMD on the ioctl call.
+         */
+        get_user(cmd, (int *)rq->ifr_data);
+        userdata = (char *)(((unsigned int *)rq->ifr_data)+1);
+    }
+    else
+    {
+        userdata = (char *)rq->ifr_data;
+    }
+
+    if ((ar->arWlanState == WLAN_DISABLED) &&
+        ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) &&
+         (cmd != AR6000_XIOCTL_DIAG_READ) &&
+         (cmd != AR6000_XIOCTL_DIAG_WRITE)))
+    {
+        return -EIO;
+    }
+
+    ret = 0;
+    switch(cmd)
+    {
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+        case AR6000_XIOCTL_TCMD_CONT_TX:
+            {
+                TCMD_CONT_TX txCmd;
+
+                if (ar->tcmdPm == TCMD_PM_SLEEP) {
+                    A_PRINTF("Can NOT send tx tcmd when target is asleep! \n");
+                    return -EFAULT;
+                }
+
+                if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX)))
+                    return -EFAULT;
+                wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX));
+            }
+            break;
+        case AR6000_XIOCTL_TCMD_CONT_RX:
+            {
+                TCMD_CONT_RX rxCmd;
+
+                if (ar->tcmdPm == TCMD_PM_SLEEP) {
+                    A_PRINTF("Can NOT send rx tcmd when target is asleep! \n");
+                    return -EFAULT;
+                }
+                if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX)))
+                    return -EFAULT;
+                switch(rxCmd.act)
+                {
+                    case TCMD_CONT_RX_PROMIS:
+                    case TCMD_CONT_RX_FILTER:
+                    case TCMD_CONT_RX_SETMAC:
+                         wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd,
+                                                sizeof(TCMD_CONT_RX));
+                         break;
+                    case TCMD_CONT_RX_REPORT:
+                         ar6000_ioctl_tcmd_get_rx_report(dev, rq,
+                         (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX));
+                         break;
+                    default:
+                         A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act);
+                         return -EINVAL;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_TCMD_PM:
+            {
+                TCMD_PM pmCmd;
+
+                if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM)))
+                    return -EFAULT;
+                ar->tcmdPm = pmCmd.mode;
+                wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM));
+            }
+            break;
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+        case AR6000_XIOCTL_BMI_DONE:
+            if(bmienable)
+            {
+                ret = ar6000_init(dev);
+            }
+            else
+            {
+                ret = BMIDone(hifDevice);
+            }
+            break;
+
+        case AR6000_XIOCTL_BMI_READ_MEMORY:
+            get_user(address, (unsigned int *)userdata);
+            get_user(length, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n",
+                             address, length);
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                ret = BMIReadMemory(hifDevice, address, buffer, length);
+                if (copy_to_user(rq->ifr_data, buffer, length)) {
+                    ret = -EFAULT;
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+            break;
+
+        case AR6000_XIOCTL_BMI_WRITE_MEMORY:
+            get_user(address, (unsigned int *)userdata);
+            get_user(length, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n",
+                             address, length);
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                if (copy_from_user(buffer, &userdata[sizeof(address) +
+                                   sizeof(length)], length))
+                {
+                    ret = -EFAULT;
+                } else {
+                    ret = BMIWriteMemory(hifDevice, address, buffer, length);
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+            break;
+
+        case AR6000_XIOCTL_BMI_TEST:
+           AR_DEBUG_PRINTF("No longer supported\n");
+           ret = -EOPNOTSUPP;
+           break;
+
+        case AR6000_XIOCTL_BMI_EXECUTE:
+            get_user(address, (unsigned int *)userdata);
+            get_user(param, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n",
+                             address, param);
+            ret = BMIExecute(hifDevice, address, &param);
+            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+            break;
+
+        case AR6000_XIOCTL_BMI_SET_APP_START:
+            get_user(address, (unsigned int *)userdata);
+            AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address);
+            ret = BMISetAppStart(hifDevice, address);
+            break;
+
+        case AR6000_XIOCTL_BMI_READ_SOC_REGISTER:
+            get_user(address, (unsigned int *)userdata);
+            ret = BMIReadSOCRegister(hifDevice, address, &param);
+            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+            break;
+
+        case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER:
+            get_user(address, (unsigned int *)userdata);
+            get_user(param, (unsigned int *)userdata + 1);
+            ret = BMIWriteSOCRegister(hifDevice, address, param);
+            break;
+
+#ifdef HTC_RAW_INTERFACE
+        case AR6000_XIOCTL_HTC_RAW_OPEN:
+            ret = A_OK;
+            if (!arRawIfEnabled(ar)) {
+                /* make sure block size is set in case the target was reset since last
+                  * BMI phase (i.e. flashup downloads) */
+                ret = ar6000_SetHTCBlockSize(ar);
+                if (A_FAILED(ret)) {
+                    break;
+                }
+                /* Terminate the BMI phase */
+                ret = BMIDone(hifDevice);
+                if (ret == A_OK) {
+                    ret = ar6000_htc_raw_open(ar);
+                }
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_CLOSE:
+            if (arRawIfEnabled(ar)) {
+                ret = ar6000_htc_raw_close(ar);
+                arRawIfEnabled(ar) = FALSE;
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_READ:
+            if (arRawIfEnabled(ar)) {
+                unsigned int streamID;
+                get_user(streamID, (unsigned int *)userdata);
+                get_user(length, (unsigned int *)userdata + 1);
+                buffer = rq->ifr_data + sizeof(length);
+                ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID,
+                                          buffer, length);
+                put_user(ret, (unsigned int *)rq->ifr_data);
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_WRITE:
+            if (arRawIfEnabled(ar)) {
+                unsigned int streamID;
+                get_user(streamID, (unsigned int *)userdata);
+                get_user(length, (unsigned int *)userdata + 1);
+                buffer = userdata + sizeof(streamID) + sizeof(length);
+                ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID,
+                                           buffer, length);
+                put_user(ret, (unsigned int *)rq->ifr_data);
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+#endif /* HTC_RAW_INTERFACE */
+
+        case AR6000_IOCTL_WMI_GETREV:
+        {
+            if (copy_to_user(rq->ifr_data, &ar->arVersion,
+                             sizeof(ar->arVersion)))
+            {
+                ret = -EFAULT;
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETPWR:
+        {
+            WMI_POWER_MODE_CMD pwrModeCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&pwrModeCmd, userdata,
+                                   sizeof(pwrModeCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS:
+        {
+            WMI_IBSS_PM_CAPS_CMD ibssPmCaps;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&ibssPmCaps, userdata,
+                                   sizeof(ibssPmCaps)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl,
+                    ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar->arIbssPsEnable = ibssPmCaps.power_saving;
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_PMPARAMS:
+        {
+            WMI_POWER_PARAMS_CMD pmParams;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&pmParams, userdata,
+                                      sizeof(pmParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period,
+                                     pmParams.pspoll_number,
+                                     pmParams.dtim_policy) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETSCAN:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&scParams, userdata,
+                                      sizeof(scParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) {
+                    ar->arSkipScan = FALSE;
+                } else {
+                    ar->arSkipScan = TRUE;
+                }
+
+                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETLISTENINT:
+        {
+            WMI_LISTEN_INT_CMD listenCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&listenCmd, userdata,
+                                      sizeof(listenCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                    if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) {
+                        ret = -EIO;
+                    } else {
+                        AR6000_SPIN_LOCK(&ar->arLock, 0);
+                        ar->arListenInterval = param;
+                        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                    }
+
+                }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_BMISS_TIME:
+        {
+            WMI_BMISS_TIME_CMD bmissCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&bmissCmd, userdata,
+                                      sizeof(bmissCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETBSSFILTER:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+
+                get_user(param, (unsigned char *)userdata);
+                get_user(param2, (unsigned int *)(userdata + 1));
+		printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2);
+                if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_snr_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_rssi_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_CLR_RSSISNR:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            }
+            ret = wmi_clr_rssi_snr(ar->arWmi);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_lq_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_LPREAMBLE:
+        {
+            WMI_SET_LPREAMBLE_CMD setLpreambleCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setLpreambleCmd, userdata,
+                                   sizeof(setLpreambleCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_RTS:
+        {
+            WMI_SET_RTS_CMD rtsCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&rtsCmd, userdata,
+                                   sizeof(rtsCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WMM:
+        {
+            ret = ar6000_ioctl_set_wmm(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_TXOP:
+        {
+            ret = ar6000_ioctl_set_txop(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_RD:
+        {
+            ret = ar6000_ioctl_get_rd(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_CHANNELPARAMS:
+        {
+            ret = ar6000_ioctl_set_channelParams(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_PROBEDSSID:
+        {
+            ret = ar6000_ioctl_set_probedSsid(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_BADAP:
+        {
+            ret = ar6000_ioctl_set_badAp(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_CREATE_QOS:
+        {
+            ret = ar6000_ioctl_create_qos(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_DELETE_QOS:
+        {
+            ret = ar6000_ioctl_delete_qos(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_GET_QOS_QUEUE:
+        {
+            ret = ar6000_ioctl_get_qos_queue(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_GET_TARGET_STATS:
+        {
+            ret = ar6000_ioctl_get_target_stats(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK:
+        {
+            ret = ar6000_ioctl_set_error_report_bitmask(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ASSOC_INFO:
+        {
+            WMI_SET_ASSOC_INFO_CMD cmd;
+            A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN];
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+                get_user(cmd.ieType, userdata);
+                if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) {
+                    ret = -EIO;
+                } else {
+                    get_user(cmd.bufferSize, userdata + 1);
+                    if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) {
+                        ret = -EFAULT;
+                        break;
+                    }
+                    if (copy_from_user(assocInfo, userdata + 2,
+                                       cmd.bufferSize))
+                    {
+                        ret = -EFAULT;
+                    } else {
+                        if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType,
+                                                 cmd.bufferSize,
+                                                 assocInfo) != A_OK)
+                        {
+                            ret = -EIO;
+                        }
+                    }
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS:
+        {
+            ret = ar6000_ioctl_set_access_params(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT:
+        {
+            ret = ar6000_ioctl_set_disconnect_timeout(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_FORCE_TARGET_RESET:
+        {
+            if (ar->arHtcTarget)
+            {
+//                HTCForceReset(htcTarget);
+            }
+            else
+            {
+                AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n");
+            }
+            break;
+        }
+        case AR6000_XIOCTL_TARGET_INFO:
+        case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */
+        {
+            /* If we made it to here, then the Target exists and is ready. */
+
+            if (cmd == AR6000_XIOCTL_TARGET_INFO) {
+                if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver,
+                                 sizeof(ar->arVersion.target_ver)))
+                {
+                    ret = -EFAULT;
+                }
+                if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType,
+                                 sizeof(ar->arTargetType)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS:
+        {
+            WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam;
+
+            if (copy_from_user(&hbparam, userdata, sizeof(hbparam)))
+            {
+                ret = -EFAULT;
+            } else {
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                /* Start a cyclic timer with the parameters provided. */
+                if (hbparam.frequency) {
+                    ar->arHBChallengeResp.frequency = hbparam.frequency;
+                }
+                if (hbparam.threshold) {
+                    ar->arHBChallengeResp.missThres = hbparam.threshold;
+                }
+
+                /* Delete the pending timer and start a new one */
+                if (timer_pending(&ar->arHBChallengeResp.timer)) {
+                    A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+                }
+                A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP:
+        {
+            A_UINT32 cookie;
+
+            if (copy_from_user(&cookie, userdata, sizeof(cookie))) {
+                return -EFAULT;
+            }
+
+            /* Send the challenge on the control channel */
+            if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) {
+                return -EIO;
+            }
+            break;
+        }
+#ifdef USER_KEYS
+        case AR6000_XIOCTL_USER_SETKEYS:
+        {
+
+            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN;
+
+            if (copy_from_user(&ar->user_key_ctrl, userdata,
+                               sizeof(ar->user_key_ctrl)))
+            {
+                return -EFAULT;
+            }
+
+            A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl);
+            break;
+        }
+#endif /* USER_KEYS */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+        case AR6000_XIOCTL_GPIO_OUTPUT_SET:
+        {
+            struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_output_set_cmd, userdata,
+                                sizeof(gpio_output_set_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_output_set(dev,
+                                             gpio_output_set_cmd.set_mask,
+                                             gpio_output_set_cmd.clear_mask,
+                                             gpio_output_set_cmd.enable_mask,
+                                             gpio_output_set_cmd.disable_mask);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INPUT_GET:
+        {
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            ret = ar6000_gpio_input_get(dev);
+            if (ret != A_OK) {
+                up(&ar->arSem);
+                return -EIO;
+            }
+
+            /* Wait for Target to respond. */
+            wait_event_interruptible(arEvent, gpio_data_available);
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            } else {
+                A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE);
+
+                if (copy_to_user(userdata, &gpio_reg_results.value,
+                                 sizeof(gpio_reg_results.value)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_REGISTER_SET:
+        {
+            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_register_cmd, userdata,
+                                sizeof(gpio_register_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_register_set(dev,
+                                               gpio_register_cmd.gpioreg_id,
+                                               gpio_register_cmd.value);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+
+                /* Wait for acknowledgement from Target */
+                wait_event_interruptible(arEvent, gpio_ack_received);
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_REGISTER_GET:
+        {
+            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_register_cmd, userdata,
+                                sizeof(gpio_register_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id);
+                if (ret != A_OK) {
+                    up(&ar->arSem);
+                    return -EIO;
+                }
+
+                /* Wait for Target to respond. */
+                wait_event_interruptible(arEvent, gpio_data_available);
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                } else {
+                    A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id);
+                    if (copy_to_user(userdata, &gpio_reg_results,
+                                     sizeof(gpio_reg_results)))
+                    {
+                        ret = -EFAULT;
+                    }
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INTR_ACK:
+        {
+            struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_intr_ack_cmd, userdata,
+                                sizeof(gpio_intr_ack_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INTR_WAIT:
+        {
+            /* Wait for Target to report an interrupt. */
+            dev_hold(dev);
+            rtnl_unlock();
+            wait_event_interruptible(arEvent, gpio_intr_available);
+            rtnl_lock();
+            __dev_put(dev);
+
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            } else {
+                if (copy_to_user(userdata, &gpio_intr_results,
+                                 sizeof(gpio_intr_results)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            break;
+        }
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+        case AR6000_XIOCTL_DBGLOG_CFG_MODULE:
+        {
+            struct ar6000_dbglog_module_config_s config;
+
+            if (copy_from_user(&config, userdata, sizeof(config))) {
+                return -EFAULT;
+            }
+
+            /* Send the challenge on the control channel */
+            if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask,
+                                            config.tsr, config.rep,
+                                            config.size, config.valid) != A_OK)
+            {
+                return -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS:
+        {
+            /* Send the challenge on the control channel */
+            if (ar6000_dbglog_get_debug_logs(ar) != A_OK)
+            {
+                return -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_ADHOC_BSSID:
+        {
+            WMI_SET_ADHOC_BSSID_CMD adhocBssid;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&adhocBssid, userdata,
+                                      sizeof(adhocBssid)))
+            {
+                ret = -EFAULT;
+            } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac,
+                                AR6000_ETH_ADDR_LEN) == 0)
+            {
+                ret = -EFAULT;
+            } else {
+
+                A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid));
+        }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_OPT_MODE:
+        {
+        WMI_SET_OPT_MODE_CMD optModeCmd;
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&optModeCmd, userdata,
+                                      sizeof(optModeCmd)))
+            {
+                ret = -EFAULT;
+            } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) {
+                ret = -EFAULT;
+
+            } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode)
+                       != A_OK)
+            {
+                ret = -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_OPT_SEND_FRAME:
+        {
+        WMI_OPT_TX_FRAME_CMD optTxFrmCmd;
+            A_UINT8 data[MAX_OPT_DATA_LEN];
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&optTxFrmCmd, userdata,
+                                      sizeof(optTxFrmCmd)))
+            {
+                ret = -EFAULT;
+            } else if (copy_from_user(data,
+                                      userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1,
+                                      optTxFrmCmd.optIEDataLen))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = wmi_opt_tx_frame_cmd(ar->arWmi,
+                                           optTxFrmCmd.frmType,
+                                           optTxFrmCmd.dstAddr,
+                                           optTxFrmCmd.bssid,
+                                           optTxFrmCmd.optIEDataLen,
+                                           data);
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SETRETRYLIMITS:
+        {
+            WMI_SET_RETRY_LIMITS_CMD setRetryParams;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setRetryParams, userdata,
+                                      sizeof(setRetryParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType,
+                                          setRetryParams.trafficClass,
+                                          setRetryParams.maxRetries,
+                                          setRetryParams.enableNotify) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar->arMaxRetries = setRetryParams.maxRetries;
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL:
+        {
+            WMI_BEACON_INT_CMD bIntvlCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&bIntvlCmd, userdata,
+                       sizeof(bIntvlCmd)))
+            {
+                ret = -EFAULT;
+            } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval)
+                        != A_OK)
+            {
+                ret = -EIO;
+            }
+            break;
+        }
+        case IEEE80211_IOCTL_SETAUTHALG:
+        {
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            struct ieee80211req_authalg req;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&req, userdata,
+                       sizeof(struct ieee80211req_authalg)))
+            {
+                ret = -EFAULT;
+            } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+                ar->arDot11AuthMode  = OPEN_AUTH;
+                ar->arPairwiseCrypto  = NONE_CRYPT;
+                ar->arGroupCrypto     = NONE_CRYPT;
+            } else if (req.auth_alg == AUTH_ALG_LEAP) {
+                ar->arDot11AuthMode   = LEAP_AUTH;
+            } else {
+                ret = -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_VOICE_PKT_SIZE:
+            ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata);
+            break;
+
+        case AR6000_XIOCTL_SET_MAX_SP:
+            ret = ar6000_xioctl_set_max_sp_len(dev, userdata);
+            break;
+
+        case AR6000_XIOCTL_WMI_GET_ROAM_TBL:
+            ret = ar6000_ioctl_get_roam_tbl(dev, rq);
+            break;
+        case AR6000_XIOCTL_WMI_SET_ROAM_CTRL:
+            ret = ar6000_ioctl_set_roam_ctrl(dev, userdata);
+            break;
+        case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS:
+            ret = ar6000_ioctl_set_powersave_timers(dev, userdata);
+            break;
+        case AR6000_XIOCTRL_WMI_GET_POWER_MODE:
+            ret = ar6000_ioctl_get_power_mode(dev, rq);
+            break;
+        case AR6000_XIOCTRL_WMI_SET_WLAN_STATE:
+            get_user(ar->arWlanState, (unsigned int *)userdata);
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+                break;
+            }
+
+            if (ar->arWlanState == WLAN_ENABLED) {
+                /* Enable foreground scanning */
+                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                if (ar->arSsidLen) {
+                    ar->arConnectPending = TRUE;
+                    if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+                                        ar->arDot11AuthMode, ar->arAuthMode,
+                                        ar->arPairwiseCrypto,
+                                        ar->arPairwiseCryptoLen,
+                                        ar->arGroupCrypto, ar->arGroupCryptoLen,
+                                        ar->arSsidLen, ar->arSsid,
+                                        ar->arReqBssid, ar->arChannelHint,
+                                        ar->arConnectCtrlFlags) != A_OK)
+                    {
+                        ret = -EIO;
+                        ar->arConnectPending = FALSE;
+                    }
+                }
+            } else {
+                /* Disconnect from the AP and disable foreground scanning */
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
+                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                    wmi_disconnect_cmd(ar->arWmi);
+                } else {
+                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                }
+
+                if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_GET_ROAM_DATA:
+            ret = ar6000_ioctl_get_roam_data(dev, rq);
+            break;
+        case AR6000_XIOCTL_WMI_SET_BT_STATUS:
+            ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata);
+            break;
+        case AR6000_XIOCTL_WMI_SET_BT_PARAMS:
+            ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata);
+            break;
+        case AR6000_XIOCTL_WMI_STARTSCAN:
+        {
+            WMI_START_SCAN_CMD setStartScanCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                    ret = -EIO;
+                } else if (copy_from_user(&setStartScanCmd, userdata,
+                                          sizeof(setStartScanCmd)))
+                {
+                    ret = -EFAULT;
+                } else {
+                    if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType,
+                                    setStartScanCmd.forceFgScan,
+                                    setStartScanCmd.isLegacy,
+                                    setStartScanCmd.homeDwellTime,
+                                    setStartScanCmd.forceScanInterval) != A_OK)
+                    {
+                        ret = -EIO;
+                    }
+                }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SETFIXRATES:
+        {
+            WMI_FIX_RATES_CMD setFixRatesCmd;
+            A_STATUS returnStatus;
+
+            if (ar->arWmiReady == FALSE) {
+                    ret = -EIO;
+                } else if (copy_from_user(&setFixRatesCmd, userdata,
+                                          sizeof(setFixRatesCmd)))
+                {
+                    ret = -EFAULT;
+                } else {
+                    returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask);
+                    if (returnStatus == A_EINVAL)
+                    {
+                        ret = -EINVAL;
+                    }
+                    else if(returnStatus != A_OK) {
+                        ret = -EIO;
+                    }
+                }
+            break;
+        }
+
+        case AR6000_XIOCTL_WMI_GETFIXRATES:
+        {
+            WMI_FIX_RATES_CMD getFixRatesCmd;
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            int ret = 0;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+            /* Used copy_from_user/copy_to_user to access user space data */
+            if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) {
+                ret = -EFAULT;
+            } else {
+                ar->arRateMask = 0xFFFF;
+
+                if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) {
+                    up(&ar->arSem);
+                    return -EIO;
+                }
+
+                wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ);
+
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                }
+
+                if (!ret) {
+                    getFixRatesCmd.fixRateMask = ar->arRateMask;
+                }
+
+                if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) {
+                   ret = -EFAULT;
+                }
+
+                up(&ar->arSem);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_AUTHMODE:
+        {
+            WMI_SET_AUTH_MODE_CMD setAuthMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setAuthMode, userdata,
+                                      sizeof(setAuthMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_REASSOCMODE:
+        {
+            WMI_SET_REASSOC_MODE_CMD setReassocMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setReassocMode, userdata,
+                                      sizeof(setReassocMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_DIAG_READ:
+        {
+            A_UINT32 addr, data;
+            get_user(addr, (unsigned int *)userdata);
+            if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+                ret = -EIO;
+            }
+            put_user(data, (unsigned int *)userdata + 1);
+            break;
+        }
+        case AR6000_XIOCTL_DIAG_WRITE:
+        {
+            A_UINT32 addr, data;
+            get_user(addr, (unsigned int *)userdata);
+            get_user(data, (unsigned int *)userdata + 1);
+            if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+                ret = -EIO;
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_KEEPALIVE:
+        {
+             WMI_SET_KEEPALIVE_CMD setKeepAlive;
+             if (ar->arWmiReady == FALSE) {
+                 return -EIO;
+             } else if (copy_from_user(&setKeepAlive, userdata,
+                        sizeof(setKeepAlive))){
+                 ret = -EFAULT;
+             } else {
+                 if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) {
+                     ret = -EIO;
+               }
+             }
+             break;
+        }
+        case AR6000_XIOCTL_WMI_GET_KEEPALIVE:
+        {
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            WMI_GET_KEEPALIVE_CMD getKeepAlive;
+            int ret = 0;
+            if (ar->arWmiReady == FALSE) {
+               return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+            if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) {
+               ret = -EFAULT;
+            } else {
+            getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi);
+            ar->arKeepaliveConfigured = 0xFF;
+            if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){
+                up(&ar->arSem);
+                return -EIO;
+            }
+            wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ);
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            }
+
+            if (!ret) {
+                getKeepAlive.configured = ar->arKeepaliveConfigured;
+            }
+            if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) {
+               ret = -EFAULT;
+            }
+            up(&ar->arSem);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_APPIE:
+        {
+            WMI_SET_APPIE_CMD appIEcmd;
+            A_UINT8           appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN];
+            A_UINT32            fType,ieLen;
+
+	    if (ar->arWmiReady == FALSE) {
+		    return -EIO;
+	    }
+	    get_user(fType, (A_UINT32 *)userdata);
+	    appIEcmd.mgmtFrmType = fType;
+	    if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) {
+		    ret = -EIO;
+	    } else {
+		    get_user(ieLen, (A_UINT32 *)(userdata + 4));
+		    appIEcmd.ieLen = ieLen;
+		    if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) {
+			    ret = -EIO;
+			    break;
+		    }
+		    if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) {
+			    ret = -EFAULT;
+		    } else {
+			    if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType,
+						  appIEcmd.ieLen,  appIeInfo) != A_OK)
+			    {
+				    ret = -EIO;
+			    }
+		    }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER:
+        {
+            WMI_BSS_FILTER_CMD cmd;
+            A_UINT32    filterType;
+
+            if (copy_from_user(&filterType, userdata, sizeof(A_UINT32)))
+            {
+                return -EFAULT;
+            }
+            if (filterType & (IEEE80211_FILTER_TYPE_BEACON |
+                                    IEEE80211_FILTER_TYPE_PROBE_RESP))
+            {
+                cmd.bssFilter = ALL_BSS_FILTER;
+            } else {
+                cmd.bssFilter = NONE_BSS_FILTER;
+            }
+            if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) {
+                ret = -EIO;
+            }
+
+            AR6000_SPIN_LOCK(&ar->arLock, 0);
+            ar->arMgmtFilter = filterType;
+            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WSC_STATUS:
+        {
+            A_UINT32    wsc_status;
+
+            if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32)))
+            {
+                return -EFAULT;
+            }
+            if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) {
+                ret = -EIO;
+            }
+            break;
+        }
+        case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL:
+        {
+            A_UINT32 ROM_addr;
+            A_UINT32 RAM_addr;
+            A_UINT32 nbytes;
+            A_UINT32 do_activate;
+            A_UINT32 rompatch_id;
+
+            get_user(ROM_addr, (A_UINT32 *)userdata);
+            get_user(RAM_addr, (A_UINT32 *)userdata + 1);
+            get_user(nbytes, (A_UINT32 *)userdata + 2);
+            get_user(do_activate, (A_UINT32 *)userdata + 3);
+            AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x  length: %d\n",
+                             ROM_addr, RAM_addr, nbytes);
+            ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr,
+                                        nbytes, do_activate, &rompatch_id);
+            if (ret == A_OK) {
+                put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL:
+        {
+            A_UINT32 rompatch_id;
+
+            get_user(rompatch_id, (A_UINT32 *)userdata);
+            AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id);
+            ret = BMIrompatchUninstall(hifDevice, rompatch_id);
+            break;
+        }
+
+        case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE:
+        case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE:
+        {
+            A_UINT32 rompatch_count;
+
+            get_user(rompatch_count, (A_UINT32 *)userdata);
+            AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count);
+            length = sizeof(A_UINT32) * rompatch_count;
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length))
+                {
+                    ret = -EFAULT;
+                } else {
+                    if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) {
+                        ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+                    } else {
+                        ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+                    }
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+
+            break;
+        }
+
+        case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE:
+        {
+            WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setHostSleepMode, userdata,
+                                      sizeof(setHostSleepMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_host_sleep_mode_cmd(ar->arWmi,
+                                &setHostSleepMode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WOW_MODE:
+        {
+            WMI_SET_WOW_MODE_CMD setWowMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setWowMode, userdata,
+                                      sizeof(setWowMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_wow_mode_cmd(ar->arWmi,
+                                &setWowMode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_WOW_LIST:
+        {
+            WMI_GET_WOW_LIST_CMD getWowList;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&getWowList, userdata,
+                                      sizeof(getWowList)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_get_wow_list_cmd(ar->arWmi,
+                                &getWowList) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN:
+        {
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+            WMI_ADD_WOW_PATTERN_CMD cmd;
+            A_UINT8 mask_data[WOW_PATTERN_SIZE]={0};
+            A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0};
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+
+                if(copy_from_user(&cmd, userdata,
+                            sizeof(WMI_ADD_WOW_PATTERN_CMD)))
+                      return -EFAULT;
+                if (copy_from_user(pattern_data,
+                                      userdata + 3,
+                                      cmd.filter_size)){
+                        ret = -EFAULT;
+                        break;
+                }
+                if (copy_from_user(mask_data,
+                                      (userdata + 3 + cmd.filter_size),
+                                      cmd.filter_size)){
+                        ret = -EFAULT;
+                        break;
+                } else {
+                    if (wmi_add_wow_pattern_cmd(ar->arWmi,
+                                &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){
+                        ret = -EIO;
+                    }
+                }
+            }
+#undef WOW_PATTERN_SIZE
+#undef WOW_MASK_SIZE
+            break;
+        }
+        case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN:
+        {
+            WMI_DEL_WOW_PATTERN_CMD delWowPattern;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&delWowPattern, userdata,
+                                      sizeof(delWowPattern)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_del_wow_pattern_cmd(ar->arWmi,
+                                &delWowPattern) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE:
+            if (ar->arHtcTarget != NULL) {
+                HTCDumpCreditStates(ar->arHtcTarget);
+            }
+            break;
+        case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE:
+            if (ar->arHtcTarget != NULL) {
+                struct ar6000_traffic_activity_change data;
+
+                if (copy_from_user(&data, userdata, sizeof(data)))
+                {
+                    return -EFAULT;
+                }
+                    /* note, this is used for testing (mbox ping testing), indicate activity
+                     * change using the stream ID as the traffic class */
+                ar6000_indicate_tx_activity(ar,
+                                            (A_UINT8)data.StreamID,
+                                            data.Active ? TRUE : FALSE);
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&connectCtrlFlags, userdata,
+                                      sizeof(connectCtrlFlags)))
+            {
+                ret = -EFAULT;
+            } else {
+                ar->arConnectCtrlFlags = connectCtrlFlags;
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&akmpParams, userdata,
+                                      sizeof(WMI_SET_AKMP_PARAMS_CMD)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_PMKID_LIST:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+                if (copy_from_user(&pmkidInfo.numPMKID, userdata,
+                                      sizeof(pmkidInfo.numPMKID)))
+                {
+                    ret = -EFAULT;
+                    break;
+                }
+                if (copy_from_user(&pmkidInfo.pmkidList,
+                                   userdata + sizeof(pmkidInfo.numPMKID),
+                                   pmkidInfo.numPMKID * sizeof(WMI_PMKID)))
+                {
+                    ret = -EFAULT;
+                    break;
+                }
+                if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_GET_PMKID_LIST:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else  {
+                if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        default:
+            ret = -EOPNOTSUPP;
+    }
+    return ret;
+}
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/netbuf.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/netbuf.c
new file mode 100644
index 0000000..97b273b
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/netbuf.c
@@ -0,0 +1,225 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <a_config.h>
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_packet.h"
+
+#define AR6000_DATA_OFFSET    64
+
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+    skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+    skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q)
+{
+    return((void *) skb_dequeue((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q)
+{
+    return(skb_queue_len((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q)
+{
+    return(skb_queue_empty((struct sk_buff_head *) q));
+}
+
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q)
+{
+    skb_queue_head_init((struct sk_buff_head *) q);
+}
+
+void *
+a_netbuf_alloc(int size)
+{
+    struct sk_buff *skb;
+    skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size);
+    skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET));
+    return ((void *)skb);
+}
+
+/*
+ * Allocate an SKB w.o. any encapsulation requirement.
+ */
+void *
+a_netbuf_alloc_raw(int size)
+{
+    struct sk_buff *skb;
+
+    skb = dev_alloc_skb(size);
+
+    return ((void *)skb);
+}
+
+void
+a_netbuf_free(void *bufPtr)
+{
+    struct sk_buff *skb = (struct sk_buff *)bufPtr;
+
+    dev_kfree_skb(skb);
+}
+
+A_UINT32
+a_netbuf_to_len(void *bufPtr)
+{
+    return (((struct sk_buff *)bufPtr)->len);
+}
+
+void *
+a_netbuf_to_data(void *bufPtr)
+{
+    return (((struct sk_buff *)bufPtr)->data);
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_push(void *bufPtr, A_INT32 len)
+{
+    skb_push((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+    skb_push((struct sk_buff *) bufPtr, len);
+    A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_put(void *bufPtr, A_INT32 len)
+{
+    skb_put((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+    char *start = ((struct sk_buff *)bufPtr)->data +
+        ((struct sk_buff *)bufPtr)->len;
+    skb_put((struct sk_buff *)bufPtr, len);
+    A_MEMCPY(start, srcPtr, len);
+
+    return A_OK;
+}
+
+
+/*
+ * Trim the network buffer pointed to by bufPtr to len # of bytes
+ */
+A_STATUS
+a_netbuf_setlen(void *bufPtr, A_INT32 len)
+{
+    skb_trim((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer.
+ */
+A_STATUS
+a_netbuf_trim(void *bufPtr, A_INT32 len)
+{
+    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+    return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer and return the data.
+ */
+A_STATUS
+a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+    char *start = ((struct sk_buff *)bufPtr)->data +
+        (((struct sk_buff *)bufPtr)->len - len);
+
+    A_MEMCPY(dstPtr, start, len);
+    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+    return A_OK;
+}
+
+
+/*
+ * Returns the number of bytes available to a a_netbuf_push()
+ */
+A_INT32
+a_netbuf_headroom(void *bufPtr)
+{
+    return (skb_headroom((struct sk_buff *)bufPtr));
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ */
+A_STATUS
+a_netbuf_pull(void *bufPtr, A_INT32 len)
+{
+    skb_pull((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ * and return the data
+ */
+A_STATUS
+a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+    A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len);
+    skb_pull((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/osapi_linux.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/osapi_linux.h
new file mode 100644
index 0000000..5b64212
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/osapi_linux.h
@@ -0,0 +1,319 @@
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _OSAPI_LINUX_H_
+#define _OSAPI_LINUX_H_
+
+#ifdef __KERNEL__
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <linux/jiffies.h>
+#endif
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#ifdef KERNEL_2_4
+#include <asm/arch/irq.h>
+#include <asm/irq.h>
+#endif
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK           __attribute__ ((packed))
+#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE                  __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE                  __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK                __ATTRIB_PACK
+
+/*
+ * Endianes macros
+ */
+#define A_BE2CPU8(x)       ntohb(x)
+#define A_BE2CPU16(x)      ntohs(x)
+#define A_BE2CPU32(x)      ntohl(x)
+
+#define A_LE2CPU8(x)       (x)
+#define A_LE2CPU16(x)      (x)
+#define A_LE2CPU32(x)      (x)
+
+#define A_CPU2BE8(x)       htonb(x)
+#define A_CPU2BE16(x)      htons(x)
+#define A_CPU2BE32(x)      htonl(x)
+
+#define A_MEMCPY(dst, src, len)         memcpy((A_UINT8 *)(dst), (src), (len))
+#define A_MEMZERO(addr, len)            memset(addr, 0, len)
+#define A_MEMCMP(addr1, addr2, len)     memcmp((addr1), (addr2), (len))
+#define A_MALLOC(size)                  kmalloc((size), GFP_KERNEL)
+#define A_MALLOC_NOWAIT(size)           kmalloc((size), GFP_ATOMIC)
+#define A_FREE(addr)                    kfree(addr)
+#define A_PRINTF(args...)               printk(args)
+
+/* Mutual Exclusion */
+typedef spinlock_t                      A_MUTEX_T;
+#define A_MUTEX_INIT(mutex)             spin_lock_init(mutex)
+#define A_MUTEX_LOCK(mutex)             spin_lock_bh(mutex)
+#define A_MUTEX_UNLOCK(mutex)           spin_unlock_bh(mutex)
+#define A_IS_MUTEX_VALID(mutex)         TRUE  /* okay to return true, since A_MUTEX_DELETE does nothing */
+#define A_MUTEX_DELETE(mutex)           /* spin locks are not kernel resources so nothing to free.. */
+
+/* Get current time in ms adding a constant offset (in ms) */
+#define A_GET_MS(offset)    \
+	(jiffies + ((offset) / 1000) * HZ)
+
+/*
+ * Timer Functions
+ */
+#define A_MDELAY(msecs)                 mdelay(msecs)
+typedef struct timer_list               A_TIMER;
+
+#define A_INIT_TIMER(pTimer, pFunction, pArg) do {              \
+    init_timer(pTimer);                                         \
+    (pTimer)->function = (pFunction);                           \
+    (pTimer)->data   = (unsigned long)(pArg);                   \
+} while (0)
+
+/*
+ * Start a Timer that elapses after 'periodMSec' milli-seconds
+ * Support is provided for a one-shot timer. The 'repeatFlag' is
+ * ignored.
+ */
+#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do {                   \
+    if (repeatFlag) {                                                       \
+        printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__);     \
+        panic("Timer Repeat");                                              \
+    }                                                                       \
+    mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000);                \
+} while (0)
+
+/*
+ * Cancel the Timer.
+ */
+#define A_UNTIMEOUT(pTimer) do {                                \
+    del_timer((pTimer));                                        \
+} while (0)
+
+#define A_DELETE_TIMER(pTimer) do {                             \
+} while (0)
+
+/*
+ * Wait Queue related functions
+ */
+typedef wait_queue_head_t               A_WAITQUEUE_HEAD;
+#define A_INIT_WAITQUEUE_HEAD(head)     init_waitqueue_head(head)
+#ifndef wait_event_interruptible_timeout
+#define __wait_event_interruptible_timeout(wq, condition, ret)          \
+do {                                                                    \
+        wait_queue_t __wait;                                            \
+        init_waitqueue_entry(&__wait, current);                         \
+                                                                        \
+        add_wait_queue(&wq, &__wait);                                   \
+        for (;;) {                                                      \
+                set_current_state(TASK_INTERRUPTIBLE);                  \
+                if (condition)                                          \
+                        break;                                          \
+                if (!signal_pending(current)) {                         \
+                        ret = schedule_timeout(ret);                    \
+                        if (!ret)                                       \
+                                break;                                  \
+                        continue;                                       \
+                }                                                       \
+                ret = -ERESTARTSYS;                                     \
+                break;                                                  \
+        }                                                               \
+        current->state = TASK_RUNNING;                                  \
+        remove_wait_queue(&wq, &__wait);                                \
+} while (0)
+
+#define wait_event_interruptible_timeout(wq, condition, timeout)        \
+({                                                                      \
+        long __ret = timeout;                                           \
+        if (!(condition))                                               \
+                __wait_event_interruptible_timeout(wq, condition, __ret); \
+        __ret;                                                          \
+})
+#endif /* wait_event_interruptible_timeout */
+
+#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \
+    wait_event_interruptible_timeout(head, condition, timeout); \
+} while (0)
+
+#define A_WAKE_UP(head)                 wake_up(head)
+
+#ifdef DEBUG
+#define A_ASSERT(expr)  \
+    if (!(expr)) {   \
+        printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
+        panic(#expr); \
+    }
+
+#else
+#define A_ASSERT(expr)
+#endif /* DEBUG */
+
+/*
+ * Initialization of the network buffer subsystem
+ */
+#define A_NETBUF_INIT()
+
+/*
+ * Network buffer queue support
+ */
+typedef struct sk_buff_head A_NETBUF_QUEUE_T;
+
+#define A_NETBUF_QUEUE_INIT(q)  \
+    a_netbuf_queue_init(q)
+
+#define A_NETBUF_ENQUEUE(q, pkt) \
+    a_netbuf_enqueue((q), (pkt))
+#define A_NETBUF_PREQUEUE(q, pkt) \
+    a_netbuf_prequeue((q), (pkt))
+#define A_NETBUF_DEQUEUE(q) \
+    (a_netbuf_dequeue(q))
+#define A_NETBUF_QUEUE_SIZE(q)  \
+    a_netbuf_queue_size(q)
+#define A_NETBUF_QUEUE_EMPTY(q) \
+    a_netbuf_queue_empty(q)
+
+/*
+ * Network buffer support
+ */
+#define A_NETBUF_ALLOC(size) \
+    a_netbuf_alloc(size)
+#define A_NETBUF_ALLOC_RAW(size) \
+    a_netbuf_alloc_raw(size)
+#define A_NETBUF_FREE(bufPtr) \
+    a_netbuf_free(bufPtr)
+#define A_NETBUF_DATA(bufPtr) \
+    a_netbuf_to_data(bufPtr)
+#define A_NETBUF_LEN(bufPtr) \
+    a_netbuf_to_len(bufPtr)
+#define A_NETBUF_PUSH(bufPtr, len) \
+    a_netbuf_push(bufPtr, len)
+#define A_NETBUF_PUT(bufPtr, len) \
+    a_netbuf_put(bufPtr, len)
+#define A_NETBUF_TRIM(bufPtr,len) \
+    a_netbuf_trim(bufPtr, len)
+#define A_NETBUF_PULL(bufPtr, len) \
+    a_netbuf_pull(bufPtr, len)
+#define A_NETBUF_HEADROOM(bufPtr)\
+    a_netbuf_headroom(bufPtr)
+#define A_NETBUF_SETLEN(bufPtr,len) \
+    a_netbuf_setlen(bufPtr, len)
+
+/* Add data to end of a buffer  */
+#define A_NETBUF_PUT_DATA(bufPtr, srcPtr,  len) \
+    a_netbuf_put_data(bufPtr, srcPtr, len)
+
+/* Add data to start of the  buffer */
+#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr,  len) \
+    a_netbuf_push_data(bufPtr, srcPtr, len)
+
+/* Remove data at start of the buffer */
+#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \
+    a_netbuf_pull_data(bufPtr, dstPtr, len)
+
+/* Remove data from the end of the buffer */
+#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \
+    a_netbuf_trim_data(bufPtr, dstPtr, len)
+
+/* View data as "size" contiguous bytes of type "t" */
+#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \
+    (t )( ((struct skbuf *)(bufPtr))->data)
+
+/* return the beginning of the headroom for the buffer */
+#define A_NETBUF_HEAD(bufPtr) \
+        ((((struct sk_buff *)(bufPtr))->head))
+
+/*
+ * OS specific network buffer access routines
+ */
+void *a_netbuf_alloc(int size);
+void *a_netbuf_alloc_raw(int size);
+void a_netbuf_free(void *bufPtr);
+void *a_netbuf_to_data(void *bufPtr);
+A_UINT32 a_netbuf_to_len(void *bufPtr);
+A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len);
+A_INT32 a_netbuf_headroom(void *bufPtr);
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt);
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt);
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q);
+
+/*
+ * Kernel v.s User space functions
+ */
+A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n);
+A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n);
+
+#else /* __KERNEL__ */
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK           __attribute__ ((packed))
+#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE                  __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE                  __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK                __ATTRIB_PACK
+
+#endif /* __KERNEL__ */
+
+#endif /* _OSAPI_LINUX_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/wireless_ext.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/wireless_ext.c
new file mode 100644
index 0000000..af78ae0
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/ar6000/wireless_ext.c
@@ -0,0 +1,1979 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi);
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern wait_queue_head_t ar6000_scan_queue;
+
+/*
+ * Encode a WPA or RSN information element as a custom
+ * element using the hostap format.
+ */
+static u_int
+encode_ie(void *buf, size_t bufsize,
+    const u_int8_t *ie, size_t ielen,
+    const char *leader, size_t leader_len)
+{
+    u_int8_t *p;
+    int i;
+
+    if (bufsize < leader_len)
+        return 0;
+    p = buf;
+    memcpy(p, leader, leader_len);
+    bufsize -= leader_len;
+    p += leader_len;
+    for (i = 0; i < ielen && bufsize > 2; i++)
+        p += sprintf(p, "%02x", ie[i]);
+    return (i == ielen ? p - (u_int8_t *)buf : 0);
+}
+
+void
+ar6000_scan_node(void *arg, bss_t *ni)
+{
+    struct iw_event iwe;
+#if WIRELESS_EXT > 14
+    char buf[64*2 + 30];
+#endif
+    struct ar_giwscan_param *param;
+    A_CHAR *current_ev;
+    A_CHAR *end_buf;
+    struct ieee80211_common_ie  *cie;
+	struct iw_request_info info;
+
+	info.cmd = 0;
+	info.flags = 0;
+
+    param = (struct ar_giwscan_param *)arg;
+
+    if (param->current_ev >= param->end_buf) {
+        return;
+    }
+    if ((param->firstPass == TRUE) &&
+        ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) {
+        /*
+         * Only forward wpa bss's in first pass
+         */
+        return;
+    }
+
+     if ((param->firstPass == FALSE) &&
+        ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) {
+        /*
+         * Only forward non-wpa bss's in 2nd pass
+         */
+        return;
+    }
+
+    current_ev = param->current_ev;
+    end_buf = param->end_buf;
+
+    cie = &ni->ni_cie;
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWAP;
+    iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+    A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6);
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_ADDR_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWESSID;
+    iwe.u.data.flags = 1;
+    iwe.u.data.length = cie->ie_ssid[1];
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+                                      &cie->ie_ssid[2]);
+
+    if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) {
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = SIOCGIWMODE;
+        iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ?
+                IW_MODE_MASTER : IW_MODE_ADHOC;
+        current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                          IW_EV_UINT_LEN);
+    }
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWFREQ;
+    iwe.u.freq.m = cie->ie_chan * 100000;
+    iwe.u.freq.e = 1;
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_FREQ_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = IWEVQUAL;
+    ar6000_set_quality(&iwe.u.qual, ni->ni_snr);
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_QUAL_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWENCODE;
+    if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) {
+        iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+    } else {
+        iwe.u.data.flags = IW_ENCODE_DISABLED;
+    }
+    iwe.u.data.length = 0;
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, "");
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = IWEVCUSTOM;
+    snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt);
+    iwe.u.data.length = strlen(buf);
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf);
+
+    if (cie->ie_wpa != NULL) {
+        static const char wpa_leader[] = "wpa_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa,
+                                      cie->ie_wpa[1]+2,
+                                      wpa_leader, sizeof(wpa_leader)-1);
+
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) {
+        static const char rsn_leader[] = "rsn_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn,
+                                      cie->ie_rsn[1]+2,
+                                      rsn_leader, sizeof(rsn_leader)-1);
+
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_wmm != NULL) {
+        static const char wmm_leader[] = "wmm_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm,
+                                      cie->ie_wmm[1]+2,
+                                      wmm_leader, sizeof(wmm_leader)-1);
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_ath != NULL) {
+        static const char ath_leader[] = "ath_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath,
+                                      cie->ie_ath[1]+2,
+                                      ath_leader, sizeof(ath_leader)-1);
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    param->current_ev = current_ev;
+}
+
+int
+ar6000_ioctl_giwscan(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_point *data, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ar_giwscan_param param;
+    int i;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    param.current_ev = extra;
+    param.end_buf = extra + IW_SCAN_MAX_DATA;
+    param.firstPass = TRUE;
+
+    /*
+     * Do two passes to insure WPA scan candidates
+     * are sorted to the front.  This is a hack to deal with
+     * the wireless extensions capping scan results at
+     * IW_SCAN_MAX_DATA bytes.  In densely populated environments
+     * it's easy to overflow this buffer (especially with WPA/RSN
+     * information elements).  Note this sorting hack does not
+     * guarantee we won't overflow anyway.
+     */
+    for (i = 0; i < 2; i++) {
+        /*
+         * Translate data to WE format.
+         */
+        wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, &param);
+        param.firstPass = FALSE;
+        if (param.current_ev >= param.end_buf) {
+            data->length = param.current_ev - extra;
+            return -E2BIG;
+        }
+    }
+
+    data->length = param.current_ev - extra;
+    return 0;
+}
+
+extern int reconnect_flag;
+/* SIOCSIWESSID */
+static int
+ar6000_ioctl_siwessid(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *ssid)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_STATUS status;
+    A_UINT8     arNetworkType;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    /*
+     * iwconfig passes a string with length excluding any trailing NUL.
+     * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall
+     * over badly if we do. So we limit the ESSID to 31 bytes.
+     */
+    if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) {
+        /*
+         * ssid is invalid
+         */
+        return -EINVAL;
+    }
+    /* Added for bug 25178, return an IOCTL error instead of target returning
+       Illegal parameter error when either the BSSID or channel is missing
+       and we cannot scan during connect.
+     */
+    if (data->flags) {
+        if (ar->arSkipScan == TRUE &&
+            (ar->arChannelHint == 0 ||
+             (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] &&
+              !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5])))
+        {
+            return -EINVAL;
+        }
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+
+    if (ar->arTxPending[WMI_CONTROL_PRI]) {
+        /*
+         * sleep until the command queue drains
+         */
+        wait_event_interruptible_timeout(arEvent,
+            ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ);
+        if (signal_pending(current)) {
+            return -EINTR;
+        }
+    }
+
+    if (!data->flags) {
+        arNetworkType = ar->arNetworkType;
+        ar6000_init_profile_info(ar);
+        ar->arNetworkType = arNetworkType;
+    }
+
+    /*
+     * The original logic here prevented a disconnect if issuing an "essid off"
+     * if no ESSID was set, presumably to prevent sending multiple disconnects
+     * to the WMI.
+     *
+     * Unfortunately, this also meant that no disconnect was sent when we were
+     * already connected, but the profile has been changed since (which also
+     * clears the ESSID as a reminder that the WMI needs updating.)
+     *
+     * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't
+     * seem to mind being sent multiple disconnects.
+     */
+    if (1 || (ar->arSsidLen) || (!data->flags))
+    {
+        if ((!data->flags) ||
+            (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) ||
+            (ar->arSsidLen != (data->length)))
+        {
+            /*
+             * SSID set previously or essid off has been issued.
+             *
+             * Disconnect Command is issued in two cases after wmi is ready
+             * (1) ssid is different from the previous setting
+             * (2) essid off has been issued
+             *
+             */
+            if (ar->arWmiReady == TRUE) {
+                reconnect_flag = 0;
+                status = wmi_disconnect_cmd(ar->arWmi);
+                A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+                ar->arSsidLen = 0;
+                if (ar->arSkipScan == FALSE) {
+                    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+                }
+                if (!data->flags) {
+                    up(&ar->arSem);
+                    return 0;
+                }
+            } else {
+                 up(&ar->arSem);
+            }
+        }
+        else
+        {
+            /*
+             * SSID is same, so we assume profile hasn't changed.
+             * If the interface is up and wmi is ready, we issue
+             * a reconnect cmd. Issue a reconnect only we are already
+             * connected.
+             */
+            if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE))
+            {
+                reconnect_flag = TRUE;
+                status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
+                                           ar->arChannelHint);
+                up(&ar->arSem);
+                if (status != A_OK) {
+                    return -EIO;
+                }
+                return 0;
+            }
+            else{
+                /*
+                 * Dont return if connect is pending.
+                 */
+                if(!(ar->arConnectPending)) {
+                    up(&ar->arSem);
+                    return 0;
+                }
+            }
+        }
+    }
+
+    ar->arSsidLen = data->length;
+    A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen);
+
+    /* The ssid length check prevents second "essid off" from the user,
+       to be treated as a connect cmd. The second "essid off" is ignored.
+    */
+    if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) )
+    {
+        AR6000_SPIN_LOCK(&ar->arLock, 0);
+        if (SHARED_AUTH == ar->arDot11AuthMode) {
+            ar6000_install_static_wep_keys(ar);
+        }
+        AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\
+                        " PW crypto %d PW crypto Len %d GRP crypto %d"\
+                        " GRP crypto Len %d\n",
+                        ar->arAuthMode, ar->arDot11AuthMode,
+                        ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+                        ar->arGroupCrypto, ar->arGroupCryptoLen);
+        reconnect_flag = 0;
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+                                 ar->arDot11AuthMode, ar->arAuthMode,
+                                 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+                                 ar->arGroupCrypto,ar->arGroupCryptoLen,
+                                 ar->arSsidLen, ar->arSsid,
+                                 ar->arReqBssid, ar->arChannelHint,
+                                 ar->arConnectCtrlFlags);
+
+
+        up(&ar->arSem);
+
+        if (status != A_OK) {
+            return -EIO;
+        }
+        ar->arConnectPending = TRUE;
+    }else{
+      up(&ar->arSem);
+    }
+    return 0;
+}
+
+/* SIOCGIWESSID */
+static int
+ar6000_ioctl_giwessid(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *essid)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    data->flags = 1;
+    data->length = ar->arSsidLen;
+    A_MEMCPY(essid, ar->arSsid, ar->arSsidLen);
+
+    return 0;
+}
+
+
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar)
+{
+    A_UINT8 index;
+    A_UINT8 keyUsage;
+
+    for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
+        if (ar->arWepKeyList[index].arKeyLen) {
+            keyUsage = GROUP_USAGE;
+            if (index == ar->arDefTxKeyIndex) {
+                keyUsage |= TX_USAGE;
+            }
+            wmi_addKey_cmd(ar->arWmi,
+                           index,
+                           WEP_CRYPT,
+                           keyUsage,
+                           ar->arWepKeyList[index].arKeyLen,
+                           NULL,
+                           ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL,
+                           NO_SYNC_WMIFLAG);
+        }
+    }
+}
+
+int
+ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return 0;
+}
+
+int
+ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra;
+
+    if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE))
+		return -EIO;
+
+    switch (mlme->im_op) {
+        case IEEE80211_MLME_DISASSOC:
+        case IEEE80211_MLME_DEAUTH:
+            /* Not Supported */
+            break;
+        default:
+            break;
+    }
+    return 0;
+}
+
+
+int
+ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int
+ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info,
+			  struct iw_point *data, char *extra)
+{
+	/* The target generates the WPA/RSN IE */
+	return 0;
+}
+
+int
+ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra;
+    int ret = 0;
+
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+        ar->arDot11AuthMode  = OPEN_AUTH;
+    } else if (req->auth_alg == AUTH_ALG_LEAP) {
+        ar->arDot11AuthMode   = LEAP_AUTH;
+        ar->arPairwiseCrypto  = WEP_CRYPT;
+        ar->arGroupCrypto     = WEP_CRYPT;
+    } else {
+        ret = -EIO;
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    return ret;
+}
+static int
+ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_addpmkid  *req = (struct ieee80211req_addpmkid *)extra;
+    A_STATUS status;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n",
+                    req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2],
+                    req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5],
+                    req->pi_enable);
+
+    status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid,
+                              req->pi_enable);
+
+    if (status != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCSIWRATE
+ */
+int
+ar6000_ioctl_siwrate(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT32  kbps;
+
+    if (rrq->fixed) {
+        kbps = rrq->value / 1000;           /* rrq->value is in bps */
+    } else {
+        kbps = -1;                          /* -1 indicates auto rate */
+    }
+    if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL)
+    {
+        AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps);
+        return -EINVAL;
+    }
+    ar->arBitRate = kbps;
+    if(ar->arWmiReady == TRUE)
+    {
+        if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) {
+            return -EINVAL;
+        }
+    }
+    return 0;
+}
+
+/*
+ * SIOCGIWRATE
+ */
+int
+ar6000_ioctl_giwrate(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        ar->arBitRate = 0xFFFF;
+        if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) {
+            up(&ar->arSem);
+            return -EIO;
+        }
+        wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ);
+        if (signal_pending(current)) {
+            ret = -EINTR;
+        }
+    }
+    /* If the interface is down or wmi is not ready or the target is not
+       connected - return the value stored in the device structure */
+    if (!ret) {
+        if (ar->arBitRate == -1) {
+            rrq->fixed = TRUE;
+            rrq->value = 0;
+        } else {
+            rrq->value = ar->arBitRate * 1000;
+        }
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+/*
+ * SIOCSIWTXPOW
+ */
+static int
+ar6000_ioctl_siwtxpow(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8 dbM;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arRadioSwitch == WLAN_ENABLED
+	&& rrq->disabled) {
+	    if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0)
+		    return -EIO;
+	    ar->arRadioSwitch = WLAN_DISABLED;
+    } else if (ar->arRadioSwitch == WLAN_DISABLED
+	       && !rrq->disabled) {
+	    if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0)
+		    return -EIO;
+	    ar->arRadioSwitch = WLAN_ENABLED;
+    }
+
+    if (rrq->fixed) {
+        if (rrq->flags != IW_TXPOW_DBM) {
+            return -EOPNOTSUPP;
+        }
+        ar->arTxPwr= dbM = rrq->value;
+        ar->arTxPwrSet = TRUE;
+    } else {
+        ar->arTxPwr = dbM = 0;
+        ar->arTxPwrSet = FALSE;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM);
+        wmi_set_txPwr_cmd(ar->arWmi, dbM);
+    }
+    return 0;
+}
+
+/*
+ * SIOCGIWTXPOW
+ */
+int
+ar6000_ioctl_giwtxpow(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arRadioSwitch == WLAN_DISABLED) {
+	    rrq->disabled = 1;
+	    return 0;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE))
+    {
+        ar->arTxPwr = 0;
+
+        if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) {
+            up(&ar->arSem);
+            return -EIO;
+        }
+
+        wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ);
+
+        if (signal_pending(current)) {
+            ret = -EINTR;
+         }
+    }
+   /* If the interace is down or wmi is not ready or target is not connected
+      then return value stored in the device structure */
+
+    if (!ret) {
+         if (ar->arTxPwrSet == TRUE) {
+            rrq->fixed = TRUE;
+        }
+        rrq->value = ar->arTxPwr;
+        rrq->flags = IW_TXPOW_DBM;
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+/*
+ * SIOCSIWRETRY
+ * since iwconfig only provides us with one max retry value, we use it
+ * to apply to data frames of the BE traffic class.
+ */
+static int
+ar6000_ioctl_siwretry(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (rrq->disabled) {
+        return -EOPNOTSUPP;
+    }
+
+    if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) {
+        return -EOPNOTSUPP;
+    }
+
+    if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) {
+            return - EINVAL;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE,
+                                     rrq->value, 0) != A_OK){
+            return -EINVAL;
+        }
+    }
+    ar->arMaxRetries = rrq->value;
+    return 0;
+}
+
+/*
+ * SIOCGIWRETRY
+ */
+static int
+ar6000_ioctl_giwretry(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    rrq->disabled = 0;
+    switch (rrq->flags & IW_RETRY_TYPE) {
+    case IW_RETRY_LIFETIME:
+        return -EOPNOTSUPP;
+        break;
+    case IW_RETRY_LIMIT:
+        rrq->flags = IW_RETRY_LIMIT;
+        switch (rrq->flags & IW_RETRY_MODIFIER) {
+        case IW_RETRY_MIN:
+            rrq->flags |= IW_RETRY_MIN;
+            rrq->value = WMI_MIN_RETRIES;
+            break;
+        case IW_RETRY_MAX:
+            rrq->flags |= IW_RETRY_MAX;
+            rrq->value = ar->arMaxRetries;
+            break;
+        }
+        break;
+    }
+    return 0;
+}
+
+/*
+ * SIOCSIWENCODE
+ */
+static int
+ar6000_ioctl_siwencode(struct net_device *dev,
+              struct iw_request_info *info,
+              struct iw_point *erq, char *keybuf)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int index;
+    A_INT32 auth = ar->arDot11AuthMode;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    index = erq->flags & IW_ENCODE_INDEX;
+
+    if (index && (((index - 1) < WMI_MIN_KEY_INDEX) ||
+                  ((index - 1) > WMI_MAX_KEY_INDEX)))
+    {
+        return -EIO;
+    }
+
+    if (erq->flags & IW_ENCODE_DISABLED) {
+        /*
+         * Encryption disabled
+         */
+        if (index) {
+            /*
+             * If key index was specified then clear the specified key
+             */
+            index--;
+            A_MEMZERO(ar->arWepKeyList[index].arKey,
+                      sizeof(ar->arWepKeyList[index].arKey));
+            ar->arWepKeyList[index].arKeyLen = 0;
+        }
+        ar->arDot11AuthMode       = OPEN_AUTH;
+        ar->arPairwiseCrypto      = NONE_CRYPT;
+        ar->arGroupCrypto         = NONE_CRYPT;
+        ar->arAuthMode            = NONE_AUTH;
+    } else {
+        /*
+         * Enabling WEP encryption
+         */
+        if (index) {
+            index--;                /* keyindex is off base 1 in iwconfig */
+        }
+
+        if (erq->flags & IW_ENCODE_OPEN) {
+            auth = OPEN_AUTH;
+        } else if (erq->flags & IW_ENCODE_RESTRICTED) {
+            auth = SHARED_AUTH;
+        }
+
+        if (erq->length) {
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) {
+                return -EIO;
+            }
+
+            A_MEMZERO(ar->arWepKeyList[index].arKey,
+                      sizeof(ar->arWepKeyList[index].arKey));
+            A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length);
+            ar->arWepKeyList[index].arKeyLen = erq->length;
+        } else {
+            if (ar->arWepKeyList[index].arKeyLen == 0) {
+                return -EIO;
+            }
+            ar->arDefTxKeyIndex = index;
+        }
+
+        ar->arPairwiseCrypto      = WEP_CRYPT;
+        ar->arGroupCrypto         = WEP_CRYPT;
+        ar->arDot11AuthMode       = auth;
+        ar->arAuthMode            = NONE_AUTH;
+    }
+
+    /*
+     * profile has changed.  Erase ssid to signal change
+     */
+    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+    ar->arSsidLen = 0;
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_giwencode(struct net_device *dev,
+              struct iw_request_info *info,
+              struct iw_point *erq, char *key)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8 keyIndex;
+    struct ar_wep_key *wk;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arPairwiseCrypto == NONE_CRYPT) {
+        erq->length = 0;
+        erq->flags = IW_ENCODE_DISABLED;
+    } else {
+        /* get the keyIndex */
+        keyIndex = erq->flags & IW_ENCODE_INDEX;
+        if (0 == keyIndex) {
+            keyIndex = ar->arDefTxKeyIndex;
+        } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) ||
+                   (keyIndex - 1 > WMI_MAX_KEY_INDEX))
+        {
+            keyIndex = WMI_MIN_KEY_INDEX;
+        } else {
+            keyIndex--;
+        }
+        erq->flags = keyIndex + 1;
+        erq->flags |= IW_ENCODE_ENABLED;
+        wk = &ar->arWepKeyList[keyIndex];
+        if (erq->length > wk->arKeyLen) {
+            erq->length = wk->arKeyLen;
+        }
+        if (wk->arKeyLen) {
+            A_MEMCPY(key, wk->arKey, erq->length);
+        }
+        if (ar->arDot11AuthMode == OPEN_AUTH) {
+            erq->flags |= IW_ENCODE_OPEN;
+        } else if (ar->arDot11AuthMode == SHARED_AUTH) {
+            erq->flags |= IW_ENCODE_RESTRICTED;
+        }
+    }
+
+    return 0;
+}
+
+static int ar6000_ioctl_siwpower(struct net_device *dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	WMI_POWER_MODE power_mode;
+
+	if (wrqu->power.disabled)
+		power_mode = MAX_PERF_POWER;
+	else
+		power_mode = REC_POWER;
+
+	if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int ar6000_ioctl_giwpower(struct net_device *dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+	/*
+	 * FIXME:
+	 * https://docs.openmoko.org/trac/ticket/2267
+	 * When starting wpa_supplicant the kernel oopses.
+	 * The following condition avoids the oops.
+	 * Remove this comment to bless this solution.
+	 */
+	if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE)
+		return -EIO;
+
+	return wmi_get_power_mode_cmd(ar->arWmi);
+}
+
+static int ar6000_ioctl_siwgenie(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *dwrq,
+				 char *extra)
+{
+	/* The target does that for us */
+	return 0;
+}
+
+static int ar6000_ioctl_giwgenie(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *dwrq,
+				 char *extra)
+{
+	return 0;
+}
+
+static int ar6000_ioctl_siwauth(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *param,
+				char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	int reset = 0;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
+			ar->arAuthMode = NONE_AUTH;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA) {
+			ar->arAuthMode = WPA_AUTH;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
+			ar->arAuthMode = WPA2_AUTH;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_CIPHER_PAIRWISE:
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			ar->arPairwiseCrypto = NONE_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_WEP40) {
+			ar->arPairwiseCrypto = WEP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			ar->arPairwiseCrypto = TKIP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			ar->arPairwiseCrypto = AES_CRYPT;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			ar->arGroupCrypto = NONE_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_WEP40) {
+			ar->arGroupCrypto = WEP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			ar->arGroupCrypto = TKIP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			ar->arGroupCrypto = AES_CRYPT;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_KEY_MGMT:
+		if (param->value & IW_AUTH_KEY_MGMT_PSK) {
+			if (ar->arAuthMode == WPA_AUTH) {
+				ar->arAuthMode = WPA_PSK_AUTH;
+			} else if (ar->arAuthMode == WPA2_AUTH) {
+				ar->arAuthMode = WPA2_PSK_AUTH;
+			}
+
+			reset = 1;
+		}
+		break;
+
+	case IW_AUTH_TKIP_COUNTERMEASURES:
+		if (ar->arWmiReady == FALSE) {
+			return -EIO;
+		}
+		wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value);
+		break;
+
+	case IW_AUTH_DROP_UNENCRYPTED:
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+			ar->arDot11AuthMode  = OPEN_AUTH;
+		}
+		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+			ar->arDot11AuthMode  = SHARED_AUTH;
+		}
+		if (param->value & IW_AUTH_ALG_LEAP) {
+			ar->arDot11AuthMode   = LEAP_AUTH;
+			ar->arPairwiseCrypto  = WEP_CRYPT;
+			ar->arGroupCrypto     = WEP_CRYPT;
+		}
+
+		reset = 1;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		reset = 1;
+		break;
+
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+		break;
+
+	case IW_AUTH_PRIVACY_INVOKED:
+		break;
+
+	default:
+		printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags);
+		return -EOPNOTSUPP;
+	}
+
+	if (reset) {
+		A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+		ar->arSsidLen = 0;
+	}
+
+	return 0;
+}
+
+static int ar6000_ioctl_giwauth(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *dwrq,
+				char *extra)
+{
+	return 0;
+}
+
+static int ar6000_ioctl_siwencodeext(struct net_device *dev,
+				     struct iw_request_info *info,
+				     union iwreq_data *wrqu,
+				     char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int alg = ext->alg, idx;
+
+	if (ar->arWlanState == WLAN_DISABLED) {
+		return -EIO;
+	}
+
+	/* Determine and validate the key index */
+	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
+	if (idx) {
+		if (idx < 0 || idx > 3)
+			return -EINVAL;
+	}
+
+	if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) {
+		struct ieee80211req_key ik;
+		KEY_USAGE key_usage;
+		CRYPTO_TYPE key_type = NONE_CRYPT;
+		int status;
+
+		ar->user_saved_keys.keyOk = FALSE;
+
+		if (alg == IW_ENCODE_ALG_TKIP) {
+			key_type = TKIP_CRYPT;
+			ik.ik_type = IEEE80211_CIPHER_TKIP;
+		} else {
+			key_type = AES_CRYPT;
+			ik.ik_type = IEEE80211_CIPHER_AES_CCM;
+		}
+
+		ik.ik_keyix = idx;
+		ik.ik_keylen = ext->key_len;
+		ik.ik_flags = IEEE80211_KEY_RECV;
+		if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+			ik.ik_flags |= IEEE80211_KEY_XMIT
+				| IEEE80211_KEY_DEFAULT;
+		}
+
+		if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+			memcpy(&ik.ik_keyrsc, ext->rx_seq, 8);
+		}
+
+		memcpy(ik.ik_keydata, ext->key, ext->key_len);
+
+		ar->user_saved_keys.keyType = key_type;
+		if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+			key_usage = GROUP_USAGE;
+			memset(ik.ik_macaddr, 0, ETH_ALEN);
+			memcpy(&ar->user_saved_keys.bcast_ik, &ik,
+			       sizeof(struct ieee80211req_key));
+		} else {
+			key_usage = PAIRWISE_USAGE;
+			memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN);
+			memcpy(&ar->user_saved_keys.ucast_ik, &ik,
+			       sizeof(struct ieee80211req_key));
+		}
+
+		status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type,
+					key_usage, ik.ik_keylen,
+					(A_UINT8 *)&ik.ik_keyrsc,
+					ik.ik_keydata,
+					KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG);
+
+		if (status < 0)
+			return -EIO;
+
+		ar->user_saved_keys.keyOk = TRUE;
+
+		return 0;
+
+	} else {
+		/* WEP falls back to SIWENCODE */
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+
+static int ar6000_ioctl_giwencodeext(struct net_device *dev,
+				     struct iw_request_info *info,
+				     struct iw_point *dwrq,
+				     char *extra)
+{
+	return 0;
+}
+
+
+static int
+ar6000_ioctl_setparam(struct net_device *dev,
+                      struct iw_request_info *info,
+                      void *erq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int *i = (int *)extra;
+    int param = i[0];
+    int value = i[1];
+    int ret = 0;
+    A_BOOL profChanged = FALSE;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (param) {
+        case IEEE80211_PARAM_WPA:
+            switch (value) {
+                case WPA_MODE_WPA1:
+                    ar->arAuthMode = WPA_AUTH;
+                    profChanged    = TRUE;
+                    break;
+                case WPA_MODE_WPA2:
+                    ar->arAuthMode = WPA2_AUTH;
+                    profChanged    = TRUE;
+                    break;
+                case WPA_MODE_NONE:
+                    ar->arAuthMode = NONE_AUTH;
+                    profChanged    = TRUE;
+                    break;
+	    default:
+		    printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value);
+            }
+            break;
+        case IEEE80211_PARAM_AUTHMODE:
+            switch(value) {
+                case IEEE80211_AUTH_WPA_PSK:
+                    if (WPA_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA_PSK_AUTH;
+                        profChanged    = TRUE;
+                    } else if (WPA2_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA2_PSK_AUTH;
+                        profChanged    = TRUE;
+                    } else {
+                        AR_DEBUG_PRINTF("Error -  Setting PSK mode when WPA "\
+                                        "param was set to %d\n",
+                                        ar->arAuthMode);
+                        ret = -1;
+                    }
+                    break;
+                case IEEE80211_AUTH_WPA_CCKM:
+                    if (WPA2_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA2_AUTH_CCKM;
+                    } else {
+                        ar->arAuthMode = WPA_AUTH_CCKM;
+                    }
+                    break;
+                default:
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_UCASTCIPHER:
+            switch (value) {
+                case IEEE80211_CIPHER_AES_CCM:
+                    ar->arPairwiseCrypto = AES_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_TKIP:
+                    ar->arPairwiseCrypto = TKIP_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_WEP:
+                    ar->arPairwiseCrypto = WEP_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_NONE:
+                    ar->arPairwiseCrypto = NONE_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_UCASTKEYLEN:
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+                ret = -EIO;
+            } else {
+                ar->arPairwiseCryptoLen = value;
+            }
+            break;
+        case IEEE80211_PARAM_MCASTCIPHER:
+            switch (value) {
+                case IEEE80211_CIPHER_AES_CCM:
+                    ar->arGroupCrypto = AES_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_TKIP:
+                    ar->arGroupCrypto = TKIP_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_WEP:
+                    ar->arGroupCrypto = WEP_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_NONE:
+                    ar->arGroupCrypto = NONE_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_MCASTKEYLEN:
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+                ret = -EIO;
+            } else {
+                ar->arGroupCryptoLen = value;
+            }
+            break;
+        case IEEE80211_PARAM_COUNTERMEASURES:
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            wmi_set_tkip_countermeasures_cmd(ar->arWmi, value);
+            break;
+        default:
+            break;
+    }
+
+    if (profChanged == TRUE) {
+        /*
+         * profile has changed.  Erase ssid to signal change
+         */
+	A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+	ar->arSsidLen = 0;
+    }
+
+    return ret;
+}
+
+int
+ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info,
+            void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int
+ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info,
+		    void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_key *ik = (struct ieee80211req_key *)extra;
+    KEY_USAGE keyUsage;
+    A_STATUS status;
+    CRYPTO_TYPE keyType = NONE_CRYPT;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    ar->user_saved_keys.keyOk = FALSE;
+
+    if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00",
+                     IEEE80211_ADDR_LEN)) {
+        keyUsage = GROUP_USAGE;
+        A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik,
+                 sizeof(struct ieee80211req_key));
+    } else {
+        keyUsage = PAIRWISE_USAGE;
+        A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik,
+                 sizeof(struct ieee80211req_key));
+    }
+
+    switch (ik->ik_type) {
+        case IEEE80211_CIPHER_WEP:
+            keyType = WEP_CRYPT;
+            break;
+        case IEEE80211_CIPHER_TKIP:
+            keyType = TKIP_CRYPT;
+            break;
+        case IEEE80211_CIPHER_AES_CCM:
+            keyType = AES_CRYPT;
+            break;
+        default:
+            break;
+    }
+    ar->user_saved_keys.keyType = keyType;
+
+    if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            return -EIO;
+        }
+
+        status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage,
+                                ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
+                                ik->ik_keydata, KEY_OP_INIT_VAL,
+                                SYNC_BEFORE_WMIFLAG);
+
+        if (status != A_OK) {
+            return -EIO;
+        }
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata);
+    }
+
+    ar->user_saved_keys.keyOk = TRUE;
+
+    return 0;
+}
+
+
+/*
+ * SIOCGIWNAME
+ */
+int
+ar6000_ioctl_giwname(struct net_device *dev,
+           struct iw_request_info *info,
+           char *name, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (ar->arPhyCapability) {
+    case (WMI_11A_CAPABILITY):
+        strncpy(name, "AR6000 802.11a", IFNAMSIZ);
+        break;
+    case (WMI_11G_CAPABILITY):
+        strncpy(name, "AR6000 802.11g", IFNAMSIZ);
+        break;
+    case (WMI_11AG_CAPABILITY):
+        strncpy(name, "AR6000 802.11ag", IFNAMSIZ);
+        break;
+    default:
+        strncpy(name, "AR6000 802.11", IFNAMSIZ);
+        break;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCSIWFREQ
+ */
+int
+ar6000_ioctl_siwfreq(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_freq *freq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    /*
+     * We support limiting the channels via wmiconfig.
+     *
+     * We use this command to configure the channel hint for the connect cmd
+     * so it is possible the target will end up connecting to a different
+     * channel.
+     */
+    if (freq->e > 1) {
+        return -EINVAL;
+    } else if (freq->e == 1) {
+        ar->arChannelHint = freq->m / 100000;
+    } else {
+        ar->arChannelHint = wlan_ieee2freq(freq->m);
+    }
+
+    A_PRINTF("channel hint set to %d\n", ar->arChannelHint);
+    return 0;
+}
+
+/*
+ * SIOCGIWFREQ
+ */
+int
+ar6000_ioctl_giwfreq(struct net_device *dev,
+                struct iw_request_info *info,
+                struct iw_freq *freq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arConnected != TRUE) {
+        return -EINVAL;
+    }
+
+    freq->m = ar->arBssChannel * 100000;
+    freq->e = 1;
+
+    return 0;
+}
+
+/*
+ * SIOCSIWMODE
+ */
+int
+ar6000_ioctl_siwmode(struct net_device *dev,
+            struct iw_request_info *info,
+            __u32 *mode, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (*mode) {
+    case IW_MODE_INFRA:
+        ar->arNetworkType = INFRA_NETWORK;
+        break;
+    case IW_MODE_ADHOC:
+        ar->arNetworkType = ADHOC_NETWORK;
+        break;
+    default:
+        return -EINVAL;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCGIWMODE
+ */
+int
+ar6000_ioctl_giwmode(struct net_device *dev,
+            struct iw_request_info *info,
+            __u32 *mode, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (ar->arNetworkType) {
+    case INFRA_NETWORK:
+        *mode = IW_MODE_INFRA;
+        break;
+    case ADHOC_NETWORK:
+        *mode = IW_MODE_ADHOC;
+        break;
+    default:
+        return -EIO;
+    }
+    return 0;
+}
+
+/*
+ * SIOCSIWSENS
+ */
+int
+ar6000_ioctl_siwsens(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *sens, char *extra)
+{
+    return 0;
+}
+
+/*
+ * SIOCGIWSENS
+ */
+int
+ar6000_ioctl_giwsens(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *sens, char *extra)
+{
+    sens->value = 0;
+    sens->fixed = 1;
+
+    return 0;
+}
+
+/*
+ * SIOCGIWRANGE
+ */
+int
+ar6000_ioctl_giwrange(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *data, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct iw_range *range = (struct iw_range *) extra;
+    int i, ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    ar->arNumChannels = -1;
+    A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList));
+
+    if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        up(&ar->arSem);
+        return -EINTR;
+    }
+
+    data->length = sizeof(struct iw_range);
+    A_MEMZERO(range, sizeof(struct iw_range));
+
+    range->txpower_capa = IW_TXPOW_DBM;
+
+    range->min_pmp = 1 * 1024;
+    range->max_pmp = 65535 * 1024;
+    range->min_pmt = 1 * 1024;
+    range->max_pmt = 1000 * 1024;
+    range->pmp_flags = IW_POWER_PERIOD;
+    range->pmt_flags = IW_POWER_TIMEOUT;
+    range->pm_capa = 0;
+
+    range->we_version_compiled = WIRELESS_EXT;
+    range->we_version_source = 13;
+
+    range->retry_capa = IW_RETRY_LIMIT;
+    range->retry_flags = IW_RETRY_LIMIT;
+    range->min_retry = 0;
+    range->max_retry = 255;
+
+    range->num_frequency = range->num_channels = ar->arNumChannels;
+    for (i = 0; i < ar->arNumChannels; i++) {
+        range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]);
+        range->freq[i].m = ar->arChannelList[i] * 100000;
+        range->freq[i].e = 1;
+         /*
+         * Linux supports max of 32 channels, bail out once you
+         * reach the max.
+         */
+        if (i == IW_MAX_FREQUENCIES) {
+            break;
+        }
+    }
+
+    /* Max quality is max field value minus noise floor */
+    range->max_qual.qual  = 0xff - 161;
+
+    /*
+     * In order to use dBm measurements, 'level' must be lower
+     * than any possible measurement (see iw_print_stats() in
+     * wireless tools).  It's unclear how this is meant to be
+     * done, but setting zero in these values forces dBm and
+     * the actual numbers are not used.
+     */
+    range->max_qual.level = 0;
+    range->max_qual.noise = 0;
+
+    range->sensitivity = 3;
+
+    range->max_encoding_tokens = 4;
+    /* XXX query driver to find out supported key sizes */
+    range->num_encoding_sizes = 3;
+    range->encoding_size[0] = 5;        /* 40-bit */
+    range->encoding_size[1] = 13;       /* 104-bit */
+    range->encoding_size[2] = 16;       /* 128-bit */
+
+    range->num_bitrates = 0;
+
+    /* estimated maximum TCP throughput values (bps) */
+    range->throughput = 22000000;
+
+    range->min_rts = 0;
+    range->max_rts = 2347;
+    range->min_frag = 256;
+    range->max_frag = 2346;
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+
+/*
+ * SIOCSIWAP
+ * This ioctl is used to set the desired bssid for the connect command.
+ */
+int
+ar6000_ioctl_siwap(struct net_device *dev,
+              struct iw_request_info *info,
+              struct sockaddr *ap_addr, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ap_addr->sa_family != ARPHRD_ETHER) {
+        return -EIO;
+    }
+
+    if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) {
+        A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+    } else {
+        A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data,  sizeof(ar->arReqBssid));
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCGIWAP
+ */
+int
+ar6000_ioctl_giwap(struct net_device *dev,
+              struct iw_request_info *info,
+              struct sockaddr *ap_addr, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arConnected != TRUE) {
+        return -EINVAL;
+    }
+
+    A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid));
+    ap_addr->sa_family = ARPHRD_ETHER;
+
+    return 0;
+}
+
+/*
+ * SIOCGIWAPLIST
+ */
+int
+ar6000_ioctl_iwaplist(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_point *data, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+/*
+ * SIOCSIWSCAN
+ */
+int
+ar6000_ioctl_siwscan(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *extra)
+{
+#define ACT_DWELLTIME_DEFAULT   105
+#define HOME_TXDRAIN_TIME       100
+#define SCAN_INT                HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    /* We ask for everything from the target */
+    if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
+	    printk("Couldn't set filtering\n");
+	    ret = -EIO;
+    }
+
+    if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \
+                          HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) {
+        ret = -EIO;
+    }
+
+    ar->scan_complete = 0;
+    wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete,
+				     5 * HZ);
+
+    if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) {
+	    printk("Couldn't set filtering\n");
+	    ret = -EIO;
+    }
+
+    return ret;
+#undef  ACT_DWELLTIME_DEFAULT
+#undef HOME_TXDRAIN_TIME
+#undef SCAN_INT
+}
+
+
+/*
+ * Units are in db above the noise floor. That means the
+ * rssi values reported in the tx/rx descriptors in the
+ * driver are the SNR expressed in db.
+ *
+ * If you assume that the noise floor is -95, which is an
+ * excellent assumption 99.5 % of the time, then you can
+ * derive the absolute signal level (i.e. -95 + rssi).
+ * There are some other slight factors to take into account
+ * depending on whether the rssi measurement is from 11b,
+ * 11g, or 11a.   These differences are at most 2db and
+ * can be documented.
+ *
+ * NB: various calculations are based on the orinoco/wavelan
+ *     drivers for compatibility
+ */
+static void
+ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi)
+{
+    if (rssi < 0) {
+        iq->qual = 0;
+    } else {
+        iq->qual = rssi;
+    }
+
+    /* NB: max is 94 because noise is hardcoded to 161 */
+    if (iq->qual > 94)
+        iq->qual = 94;
+
+    iq->noise = 161;        /* -95dBm */
+    iq->level = iq->noise + iq->qual;
+    iq->updated = 7;
+}
+
+
+/* Structures to export the Wireless Handlers */
+static const iw_handler ath_handlers[] = {
+    (iw_handler) NULL,                          /* SIOCSIWCOMMIT */
+    (iw_handler) ar6000_ioctl_giwname,          /* SIOCGIWNAME */
+    (iw_handler) NULL,                          /* SIOCSIWNWID */
+    (iw_handler) NULL,                          /* SIOCGIWNWID */
+    (iw_handler) ar6000_ioctl_siwfreq,          /* SIOCSIWFREQ */
+    (iw_handler) ar6000_ioctl_giwfreq,          /* SIOCGIWFREQ */
+    (iw_handler) ar6000_ioctl_siwmode,          /* SIOCSIWMODE */
+    (iw_handler) ar6000_ioctl_giwmode,          /* SIOCGIWMODE */
+    (iw_handler) ar6000_ioctl_siwsens,          /* SIOCSIWSENS */
+    (iw_handler) ar6000_ioctl_giwsens,          /* SIOCGIWSENS */
+    (iw_handler) NULL /* not _used */,          /* SIOCSIWRANGE */
+    (iw_handler) ar6000_ioctl_giwrange,         /* SIOCGIWRANGE */
+    (iw_handler) NULL /* not used */,           /* SIOCSIWPRIV */
+    (iw_handler) NULL /* kernel code */,        /* SIOCGIWPRIV */
+    (iw_handler) NULL /* not used */,           /* SIOCSIWSTATS */
+    (iw_handler) NULL /* kernel code */,        /* SIOCGIWSTATS */
+    (iw_handler) NULL,                          /* SIOCSIWSPY */
+    (iw_handler) NULL,                          /* SIOCGIWSPY */
+    (iw_handler) NULL,                          /* SIOCSIWTHRSPY */
+    (iw_handler) NULL,                          /* SIOCGIWTHRSPY */
+    (iw_handler) ar6000_ioctl_siwap,            /* SIOCSIWAP */
+    (iw_handler) ar6000_ioctl_giwap,            /* SIOCGIWAP */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) ar6000_ioctl_iwaplist,         /* SIOCGIWAPLIST */
+    (iw_handler) ar6000_ioctl_siwscan,          /* SIOCSIWSCAN */
+    (iw_handler) ar6000_ioctl_giwscan,          /* SIOCGIWSCAN */
+    (iw_handler) ar6000_ioctl_siwessid,         /* SIOCSIWESSID */
+    (iw_handler) ar6000_ioctl_giwessid,         /* SIOCGIWESSID */
+    (iw_handler) NULL,                          /* SIOCSIWNICKN */
+    (iw_handler) NULL,                          /* SIOCGIWNICKN */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) ar6000_ioctl_siwrate,          /* SIOCSIWRATE */
+    (iw_handler) ar6000_ioctl_giwrate,          /* SIOCGIWRATE */
+    (iw_handler) NULL,           /* SIOCSIWRTS */
+    (iw_handler) NULL,           /* SIOCGIWRTS */
+    (iw_handler) NULL,          /* SIOCSIWFRAG */
+    (iw_handler) NULL,          /* SIOCGIWFRAG */
+    (iw_handler) ar6000_ioctl_siwtxpow,         /* SIOCSIWTXPOW */
+    (iw_handler) ar6000_ioctl_giwtxpow,         /* SIOCGIWTXPOW */
+    (iw_handler) ar6000_ioctl_siwretry,         /* SIOCSIWRETRY */
+    (iw_handler) ar6000_ioctl_giwretry,         /* SIOCGIWRETRY */
+    (iw_handler) ar6000_ioctl_siwencode,        /* SIOCSIWENCODE */
+    (iw_handler) ar6000_ioctl_giwencode,        /* SIOCGIWENCODE */
+    (iw_handler) ar6000_ioctl_siwpower,         /* SIOCSIWPOWER */
+    (iw_handler) ar6000_ioctl_giwpower,         /* SIOCGIWPOWER */
+    (iw_handler) NULL,	/* -- hole -- */
+    (iw_handler) NULL,	/* -- hole -- */
+    (iw_handler) ar6000_ioctl_siwgenie,	/* SIOCSIWGENIE */
+    (iw_handler) ar6000_ioctl_giwgenie,	/* SIOCGIWGENIE */
+    (iw_handler) ar6000_ioctl_siwauth,	/* SIOCSIWAUTH */
+    (iw_handler) ar6000_ioctl_giwauth,	/* SIOCGIWAUTH */
+    (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */
+    (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */
+    (iw_handler) NULL,		/* SIOCSIWPMKSA */
+};
+
+static const iw_handler ath_priv_handlers[] = {
+    (iw_handler) ar6000_ioctl_setparam,         /* SIOCWFIRSTPRIV+0 */
+    (iw_handler) ar6000_ioctl_getparam,         /* SIOCWFIRSTPRIV+1 */
+    (iw_handler) ar6000_ioctl_setkey,           /* SIOCWFIRSTPRIV+2 */
+    (iw_handler) ar6000_ioctl_setwmmparams,     /* SIOCWFIRSTPRIV+3 */
+    (iw_handler) ar6000_ioctl_delkey,           /* SIOCWFIRSTPRIV+4 */
+    (iw_handler) ar6000_ioctl_getwmmparams,     /* SIOCWFIRSTPRIV+5 */
+    (iw_handler) ar6000_ioctl_setoptie,         /* SIOCWFIRSTPRIV+6 */
+    (iw_handler) ar6000_ioctl_setmlme,          /* SIOCWFIRSTPRIV+7 */
+    (iw_handler) ar6000_ioctl_addpmkid,         /* SIOCWFIRSTPRIV+8 */
+};
+
+#define IW_PRIV_TYPE_KEY \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key))
+#define IW_PRIV_TYPE_DELKEY \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key))
+#define IW_PRIV_TYPE_MLME \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme))
+#define IW_PRIV_TYPE_ADDPMKID \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid))
+
+static const struct iw_priv_args ar6000_priv_args[] = {
+    { IEEE80211_IOCTL_SETKEY,
+      IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0,       "setkey"},
+    { IEEE80211_IOCTL_DELKEY,
+      IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0,    "delkey"},
+    { IEEE80211_IOCTL_SETPARAM,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0,   "setparam"},
+    { IEEE80211_IOCTL_GETPARAM,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getparam"},
+    { IEEE80211_IOCTL_SETWMMPARAMS,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0,   "setwmmparams"},
+    { IEEE80211_IOCTL_GETWMMPARAMS,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getwmmparams"},
+    { IEEE80211_IOCTL_SETOPTIE,
+      IW_PRIV_TYPE_BYTE, 0,       "setie"},
+    { IEEE80211_IOCTL_SETMLME,
+      IW_PRIV_TYPE_MLME, 0,       "setmlme"},
+    { IEEE80211_IOCTL_ADDPMKID,
+      IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0,  "addpmkid"},
+};
+
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def)
+{
+    def->private_args = (struct iw_priv_args *)ar6000_priv_args;
+    def->num_private_args = ARRAY_SIZE(ar6000_priv_args);
+}
+
+struct iw_handler_def ath_iw_handler_def = {
+    .standard         = (iw_handler *)ath_handlers,
+    .num_standard     = ARRAY_SIZE(ath_handlers),
+    .private          = (iw_handler *)ath_priv_handlers,
+    .num_private      = ARRAY_SIZE(ath_priv_handlers),
+};
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c
new file mode 100644
index 0000000..d7b610c
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif.h"
+#include "bmi.h"
+#include "htc_api.h"
+#include "bmi_internal.h"
+
+/*
+Although we had envisioned BMI to run on top of HTC, this is not what the
+final implementation boiled down to on dragon. Its a part of BSP and does
+not use the HTC protocol either. On the host side, however, we were still
+living with the original idea. I think the time has come to accept the truth
+and separate it from HTC which has been carrying BMI's burden all this while.
+It shall make HTC state machine relatively simpler
+*/
+
+/* APIs visible to the driver */
+void
+BMIInit(void)
+{
+    bmiDone = FALSE;
+}
+
+A_STATUS
+BMIDone(HIF_DEVICE *device)
+{
+    A_STATUS status;
+    A_UINT32 cid;
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
+        return A_OK;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device));
+    bmiDone = TRUE;
+    cid = BMI_DONE;
+
+    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
+{
+    A_STATUS status;
+    A_UINT32 cid;
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
+    cid = BMI_GET_TARGET_INFO;
+
+    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
+                                                sizeof(targ_info->target_ver));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
+        return A_ERROR;
+    }
+
+    if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
+        /* Determine how many bytes are in the Target's targ_info */
+        status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
+                                            sizeof(targ_info->target_info_byte_count));
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
+            return A_ERROR;
+        }
+
+        /*
+         * The Target's targ_info doesn't match the Host's targ_info.
+         * We need to do some backwards compatibility work to make this OK.
+         */
+        A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
+
+        /* Read the remainder of the targ_info */
+        status = bmiBufferReceive(device,
+                        ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
+                        sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count));
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
+                        					targ_info->target_info_byte_count));
+            return A_ERROR;
+        }
+    } else {
+        /*
+         * Target must be an AR6001 whose firmware does not
+         * support BMI_GET_TARGET_INFO.  Construct the data
+         * that it would have sent.
+         */
+        targ_info->target_info_byte_count = sizeof(targ_info);
+        targ_info->target_type = TARGET_TYPE_AR6001;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+        							targ_info->target_ver, targ_info->target_type));
+    printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+	   targ_info->target_ver, targ_info->target_type);
+
+    return A_OK;
+}
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+              A_UINT32 address,
+              A_UCHAR *buffer,
+              A_UINT32 length)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    A_UINT32 remaining, rxlen;
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+    memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       			("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+        			device, address, length));
+
+    cid = BMI_READ_MEMORY;
+
+    remaining = length;
+
+    while (remaining)
+    {
+        rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX;
+        offset = 0;
+        A_MEMCPY(&data[offset], &cid, sizeof(cid));
+        offset += sizeof(cid);
+        A_MEMCPY(&data[offset], &address, sizeof(address));
+        offset += sizeof(address);
+        A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen));
+        offset += sizeof(length);
+
+        status = bmiBufferSend(device, data, offset);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+            return A_ERROR;
+        }
+        status = bmiBufferReceive(device, data, rxlen);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+            return A_ERROR;
+        }
+        A_MEMCPY(&buffer[length - remaining], data, rxlen);
+        remaining -= rxlen; address += rxlen;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+               A_UINT32 address,
+               A_UCHAR *buffer,
+               A_UINT32 length)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    A_UINT32 remaining, txlen;
+    const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length);
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+	memset (&data, 0, header);
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+         device, address, length));
+
+    cid = BMI_WRITE_MEMORY;
+
+    remaining = length;
+    while (remaining)
+    {
+        txlen = (remaining < (BMI_DATASZ_MAX - header)) ?
+                                       remaining : (BMI_DATASZ_MAX - header);
+        offset = 0;
+        A_MEMCPY(&data[offset], &cid, sizeof(cid));
+        offset += sizeof(cid);
+        A_MEMCPY(&data[offset], &address, sizeof(address));
+        offset += sizeof(address);
+        A_MEMCPY(&data[offset], &txlen, sizeof(txlen));
+        offset += sizeof(txlen);
+        A_MEMCPY(&data[offset], &buffer[length - remaining], txlen);
+        offset += txlen;
+        status = bmiBufferSend(device, data, offset);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+            return A_ERROR;
+        }
+        remaining -= txlen; address += txlen;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+           A_UINT32 address,
+           A_UINT32 *param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)];
+    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+        device, address, *param));
+
+    cid = BMI_EXECUTE;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    A_MEMCPY(&data[offset], param, sizeof(*param));
+    offset += sizeof(*param);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, data, sizeof(*param));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+
+    A_MEMCPY(param, data, sizeof(*param));
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param));
+    return A_OK;
+}
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+               A_UINT32 address)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address)];
+    memset (&data, 0, sizeof(cid) + sizeof(address));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n",
+        device, address));
+
+    cid = BMI_SET_APP_START;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+                   A_UINT32 address,
+                   A_UINT32 *param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address)];
+    memset (&data, 0, sizeof(cid) + sizeof(address));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n",
+       device, address));
+
+    cid = BMI_READ_SOC_REGISTER;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, data, sizeof(*param));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+    A_MEMCPY(param, data, sizeof(*param));
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param));
+    return A_OK;
+}
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+                    A_UINT32 address,
+                    A_UINT32 param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)];
+
+    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+     ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+     device, address, param));
+
+    cid = BMI_WRITE_SOC_REGISTER;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    A_MEMCPY(&data[offset], &param, sizeof(param));
+    offset += sizeof(param);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+                   A_UINT32 ROM_addr,
+                   A_UINT32 RAM_addr,
+                   A_UINT32 nbytes,
+                   A_UINT32 do_activate,
+                   A_UINT32 *rompatch_id)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+                                sizeof(nbytes) + sizeof(do_activate)];
+
+	memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+                      sizeof(nbytes) + sizeof(do_activate));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n",
+         device, ROM_addr, RAM_addr, nbytes, do_activate));
+
+    cid = BMI_ROMPATCH_INSTALL;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr));
+    offset += sizeof(ROM_addr);
+    A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr));
+    offset += sizeof(RAM_addr);
+    A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes));
+    offset += sizeof(nbytes);
+    A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate));
+    offset += sizeof(do_activate);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id));
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+                     A_UINT32 rompatch_id)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)];
+    memset (&data, 0, sizeof(cid) + sizeof(rompatch_id));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n",
+         								 device, rompatch_id));
+
+    cid = BMI_ROMPATCH_UNINSTALL;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id));
+    offset += sizeof(rompatch_id);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id));
+    return A_OK;
+}
+
+static A_STATUS
+_BMIrompatchChangeActivation(HIF_DEVICE *device,
+                             A_UINT32 rompatch_count,
+                             A_UINT32 *rompatch_list,
+                             A_UINT32 do_activate)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)];
+    A_UINT32 length;
+
+	memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n",
+           device, rompatch_count));
+
+    cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count));
+    offset += sizeof(rompatch_count);
+    length = rompatch_count * sizeof(*rompatch_list);
+    A_MEMCPY(&data[offset], rompatch_list, length);
+    offset += length;
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+                    A_UINT32 rompatch_count,
+                    A_UINT32 *rompatch_list)
+{
+    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1);
+}
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+                      A_UINT32 rompatch_count,
+                      A_UINT32 *rompatch_list)
+{
+    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0);
+}
+
+/* BMI Access routines */
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+              A_UCHAR *buffer,
+              A_UINT32 length)
+{
+    A_STATUS status;
+    A_UINT32 timeout;
+    A_UINT32 address;
+    static A_UINT32 cmdCredits;
+    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+                       &mboxAddress, sizeof(mboxAddress));
+
+    cmdCredits = 0;
+    timeout = BMI_COMMUNICATION_TIMEOUT;
+
+    while(timeout-- && !cmdCredits) {
+        /* Read the counter register to get the command credits */
+        address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+        /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause
+         * a decrement, while the remaining 3 bytes has no effect.  The rationale behind this is to
+         * make all HIF accesses 4-byte aligned */
+        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4,
+            HIF_RD_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
+            return A_ERROR;
+        }
+        /* the counter is only 8=bits, ignore anything in the upper 3 bytes */
+        cmdCredits &= 0xFF;
+    }
+
+    if (cmdCredits) {
+        address = mboxAddress[ENDPOINT1];
+        status = HIFReadWrite(device, address, buffer, length,
+            HIF_WR_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
+            return A_ERROR;
+        }
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n"));
+        return A_ERROR;
+    }
+
+    return status;
+}
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+                 A_UCHAR *buffer,
+                 A_UINT32 length)
+{
+    A_STATUS status;
+    A_UINT32 address;
+    A_UINT32 timeout;
+    static A_UINT32 cmdCredits;
+    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+                       &mboxAddress, sizeof(mboxAddress));
+
+    cmdCredits = 0;
+    timeout = BMI_COMMUNICATION_TIMEOUT;
+    while(timeout-- && !cmdCredits) {
+        /* Read the counter register to get the command credits */
+        address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1;
+        /* read the counter using a 4-byte read.  Since the counter is NOT auto-decrementing,
+         * we can read this counter multiple times using a non-incrementing address mode.
+         * The rationale here is to make all HIF accesses a multiple of 4 bytes */
+        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits),
+            HIF_RD_SYNC_BYTE_FIX, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
+            return A_ERROR;
+        }
+            /* we did a 4-byte read to the same count register so mask off upper bytes */
+        cmdCredits &= 0xFF;
+        status = A_ERROR;
+    }
+
+    if (cmdCredits) {
+        address = mboxAddress[ENDPOINT1];
+        status = HIFReadWrite(device, address, buffer, length,
+            HIF_RD_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
+            return A_ERROR;
+        }
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n"));
+        return A_ERROR;
+    }
+
+    return status;
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h
new file mode 100644
index 0000000..1e21354
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h
@@ -0,0 +1,45 @@
+#ifndef BMI_INTERNAL_H
+#define BMI_INTERNAL_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "AR6Khwreg.h"
+#include "bmi_msg.h"
+
+#define BMI_COMMUNICATION_TIMEOUT       100000
+
+/* ------ Global Variable Declarations ------- */
+A_BOOL bmiDone;
+
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+              A_UCHAR *buffer,
+              A_UINT32 length);
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+                 A_UCHAR *buffer,
+                 A_UINT32 length);
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif.c
new file mode 100644
index 0000000..d04486c
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif.c
@@ -0,0 +1,824 @@
+/*
+ * @file: hif.c
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif_internal.h"
+
+/* ------ Static Variables ------ */
+
+/* ------ Global Variable Declarations ------- */
+SD_PNP_INFO Ids[] = {
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+    }                      //list is null termintaed
+};
+
+TARGET_FUNCTION_CONTEXT FunctionContext = {
+    .function.Version    = CT_SDIO_STACK_VERSION_CODE,
+    .function.pName      = "sdio_wlan",
+    .function.MaxDevices = 1,
+    .function.NumDevices = 0,
+    .function.pIds       = Ids,
+    .function.pProbe     = hifDeviceInserted,
+    .function.pRemove    = hifDeviceRemoved,
+    .function.pSuspend   = NULL,
+    .function.pResume    = NULL,
+    .function.pWake      = NULL,
+    .function.pContext   = &FunctionContext,
+};
+
+HIF_DEVICE hifDevice[HIF_MAX_DEVICES];
+HTC_CALLBACKS htcCallbacks;
+BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM];
+static BUS_REQUEST *s_busRequestFreeQueue = NULL;
+OS_CRITICALSECTION lock;
+extern A_UINT32 onebitmode;
+extern A_UINT32 busspeedlow;
+
+#ifdef DEBUG
+extern A_UINT32 debughif;
+#define ATH_DEBUG_ERROR 1
+#define ATH_DEBUG_WARN  2
+#define ATH_DEBUG_TRACE 3
+#define _AR_DEBUG_PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(lvl, args)\
+    {if (lvl <= debughif)\
+        A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\
+    }
+#else
+#define AR_DEBUG_PRINTF(lvl, args)
+#endif
+
+static BUS_REQUEST *hifAllocateBusRequest(void);
+static void hifFreeBusRequest(BUS_REQUEST *busrequest);
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper);
+static void ResetAllCards(void);
+
+/* ------ Functions ------ */
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(callbacks != NULL);
+
+    /* Store the callback and event handlers */
+    htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
+    htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler;
+    htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler;
+    htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler;
+    htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler;
+    htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler;
+    htcCallbacks.dsrHandler = callbacks->dsrHandler;
+
+    CriticalSectionInit(&lock);
+
+    /* Register with bus driver core */
+    status = SDIO_RegisterFunction(&FunctionContext.function);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+
+    return(0);
+}
+
+A_STATUS
+HIFReadWrite(HIF_DEVICE *device,
+             A_UINT32 address,
+             A_UCHAR *buffer,
+             A_UINT32 length,
+             A_UINT32 request,
+             void *context)
+{
+    A_UINT8 rw;
+    A_UINT8 mode;
+    A_UINT8 funcNo;
+    A_UINT8 opcode;
+    A_UINT16 count;
+    SDREQUEST *sdrequest;
+    SDIO_STATUS sdiostatus;
+    BUS_REQUEST *busrequest;
+    A_STATUS    status = A_OK;
+
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+
+    do {
+        busrequest = hifAllocateBusRequest();
+        if (busrequest == NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n"));
+            status = A_NO_RESOURCE;
+            break;
+        }
+
+        sdrequest = busrequest->request;
+        busrequest->context = context;
+
+        sdrequest->pDataBuffer = buffer;
+        if (request & HIF_SYNCHRONOUS) {
+            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS;
+            sdrequest->pCompleteContext = NULL;
+            sdrequest->pCompletion = NULL;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n"));
+        } else if (request & HIF_ASYNCHRONOUS) {
+            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS |
+                               SDREQ_FLAGS_TRANS_ASYNC;
+            sdrequest->pCompleteContext = busrequest;
+            sdrequest->pCompletion = hifRWCompletionHandler;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid execution mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_EXTENDED_IO) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n"));
+            sdrequest->Command = CMD53;
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid command type: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_BLOCK_BASIS) {
+            mode = CMD53_BLOCK_BASIS;
+            sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE;
+            sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE;
+            count = sdrequest->BlockCount;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Block mode (BlockLen: %d, BlockCount: %d)\n",
+                            sdrequest->BlockLen, sdrequest->BlockCount));
+        } else if (request & HIF_BYTE_BASIS) {
+            mode = CMD53_BYTE_BASIS;
+            sdrequest->BlockLen = length;
+            sdrequest->BlockCount = 1;
+            count = sdrequest->BlockLen;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Byte mode (BlockLen: %d, BlockCount: %d)\n",
+                            sdrequest->BlockLen, sdrequest->BlockCount));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid data mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+#if 0
+        /* useful for checking register accesses */
+        if (length & 0x3) {
+            A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n",
+                                request & HIF_WRITE ? "write":"read", address, length);
+        }
+#endif
+
+        if ((address >= HIF_MBOX_START_ADDR(0)) &&
+            (address <= HIF_MBOX_END_ADDR(3)))
+        {
+
+            DBG_ASSERT(length <= HIF_MBOX_WIDTH);
+
+            /*
+             * Mailbox write. Adjust the address so that the last byte
+             * falls on the EOM address.
+             */
+            address += (HIF_MBOX_WIDTH - length);
+        }
+
+
+
+        if (request & HIF_WRITE) {
+            rw = CMD53_WRITE;
+            sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n"));
+        } else if (request & HIF_READ) {
+            rw = CMD53_READ;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid direction: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_FIXED_ADDRESS) {
+            opcode = CMD53_FIXED_ADDRESS;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n"));
+        } else if (request & HIF_INCREMENTAL_ADDRESS) {
+            opcode = CMD53_INCR_ADDRESS;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid address mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle);
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo));
+        SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo,
+                           mode, opcode, address, count);
+
+        /* Send the command out */
+        sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest);
+
+        if (!SDIO_SUCCESS(sdiostatus)) {
+            status = A_ERROR;
+        }
+
+    } while (FALSE);
+
+    if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) {
+        if (busrequest != NULL) {
+            hifFreeBusRequest(busrequest);
+        }
+    }
+
+    if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) {
+            /* call back async handler on failure */
+        htcCallbacks.rwCompletionHandler(context, status);
+    }
+
+    return status;
+}
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+                   void *config, A_UINT32 configLen)
+{
+    A_UINT32 count;
+
+    switch(opcode) {
+        case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+            ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE;
+            ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE;
+            ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE;
+            ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE;
+            break;
+
+        case HIF_DEVICE_GET_MBOX_ADDR:
+            for (count = 0; count < 4; count ++) {
+                ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count);
+            }
+            break;
+        case HIF_DEVICE_GET_IRQ_PROC_MODE:
+                /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */
+            *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC;
+            break;
+        default:
+            AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+                            ("Unsupported configuration opcode: %d\n", opcode));
+            return A_ERROR;
+    }
+
+    return A_OK;
+}
+
+void
+HIFShutDownDevice(HIF_DEVICE *device)
+{
+    A_UINT8 data;
+    A_UINT32 count;
+    SDIO_STATUS status;
+    SDCONFIG_BUS_MODE_DATA busSettings;
+    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+
+    if (device != NULL) {
+        DBG_ASSERT(device->handle != NULL);
+
+        /* Remove the allocated current if any */
+        status = SDLIB_IssueConfig(device->handle,
+                                   SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /* Disable the card */
+        fData.EnableFlags = SDCONFIG_DISABLE_FUNC;
+        fData.TimeOut = 1;
+        status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+                                   &fData, sizeof(fData));
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /* Perform a soft I/O reset */
+        data = SDIO_IO_RESET;
+        status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG,
+                                  &data, 1, 1);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /*
+         * WAR - Codetelligence driver does not seem to shutdown correctly in 1
+         * bit mode. By default it configures the HC in the 4 bit. Its later in
+         * our driver that we switch to 1 bit mode. If we try to shutdown, the
+         * driver hangs so we revert to 4 bit mode, to be transparent to the
+         * underlying bus driver.
+         */
+        if (onebitmode) {
+            ZERO_OBJECT(busSettings);
+            busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle);
+            SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+                                   SDCONFIG_BUS_WIDTH_4_BIT);
+
+            /* Issue config request to change the bus width to 4 bit */
+            status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
+                                       &busSettings,
+                                       sizeof(SDCONFIG_BUS_MODE_DATA));
+            DBG_ASSERT(SDIO_SUCCESS(status));
+        }
+
+        /* Free the bus requests */
+        for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+            SDDeviceFreeRequest(device->handle, busRequest[count].request);
+        }
+        /* Clean up the queue */
+        s_busRequestFreeQueue = NULL;
+    } else {
+            /* since we are unloading the driver anyways, reset all cards in case the SDIO card
+             * is externally powered and we are unloading the SDIO stack.  This avoids the problem when
+             * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already
+             * enumerated */
+        ResetAllCards();
+        /* Unregister with bus driver core */
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Unregistering with the bus driver\n"));
+        status = SDIO_UnregisterFunction(&FunctionContext.function);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+    }
+}
+
+void
+hifRWCompletionHandler(SDREQUEST *request)
+{
+    A_STATUS status;
+    void *context;
+    BUS_REQUEST *busrequest;
+
+    if (SDIO_SUCCESS(request->Status)) {
+        status = A_OK;
+    } else {
+        status = A_ERROR;
+    }
+
+    DBG_ASSERT(status == A_OK);
+    busrequest = (BUS_REQUEST *) request->pCompleteContext;
+    context = (void *) busrequest->context;
+        /* free the request before calling the callback, in case the
+         * callback submits another request, this guarantees that
+         * there is at least 1 free request available everytime the callback
+         * is invoked */
+    hifFreeBusRequest(busrequest);
+    htcCallbacks.rwCompletionHandler(context, status);
+}
+
+void
+hifIRQHandler(void *context)
+{
+    A_STATUS status;
+    HIF_DEVICE *device;
+
+    device = (HIF_DEVICE *)context;
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+    status = htcCallbacks.dsrHandler(device->htc_handle);
+    DBG_ASSERT(status == A_OK);
+}
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle)
+{
+    BOOL enabled;
+    A_UINT8 data;
+    A_UINT32 count;
+    HIF_DEVICE *device;
+    SDIO_STATUS status;
+    A_UINT16 maxBlocks;
+    A_UINT16 maxBlockSize;
+    SDCONFIG_BUS_MODE_DATA busSettings;
+    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+    TARGET_FUNCTION_CONTEXT *functionContext;
+    SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent;
+    SD_BUSCLOCK_RATE                currentBusClock;
+
+    DBG_ASSERT(function != NULL);
+    DBG_ASSERT(handle != NULL);
+
+    device = addHifDevice(handle);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+    functionContext =  (TARGET_FUNCTION_CONTEXT *)function->pContext;
+
+    /*
+     * Issue commands to get the manufacturer ID and stuff and compare it
+     * against the rev Id derived from the ID registered during the
+     * initialization process. Report the device only in the case there
+     * is a match. In the case od SDIO, the bus driver has already queried
+     * these details so we just need to use their data structures to get the
+     * relevant values. Infact, the driver has already matched it against
+     * the Ids that we registered with it so we dont need to the step here.
+     */
+
+    /* Configure the SDIO Bus Width */
+    if (onebitmode) {
+        data = SDIO_BUS_WIDTH_1_BIT;
+        status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1);
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Unable to set the bus width to 1 bit\n"));
+            return FALSE;
+        }
+    }
+
+    /* Get current bus flags */
+    ZERO_OBJECT(busSettings);
+
+    busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle);
+    if (onebitmode) {
+        SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+                               SDCONFIG_BUS_WIDTH_1_BIT);
+    }
+
+        /* get the current operating clock, the bus driver sets us up based
+         * on what our CIS reports and what the host controller can handle
+         * we can use this to determine whether we want to drop our clock rate
+         * down */
+    currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle);
+    busSettings.ClockRate = currentBusClock;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("HIF currently running at: %d \n",currentBusClock));
+
+        /* see if HIF wants to run at a lower clock speed, we may already be
+         * at that lower clock speed */
+    if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) {
+        busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow;
+        AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+                        ("HIF overriding clock to %d \n",busSettings.ClockRate));
+    }
+
+    /* Issue config request to override clock rate */
+    status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings,
+                               sizeof(SDCONFIG_BUS_MODE_DATA));
+    if (!SDIO_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Unable to configure the host clock\n"));
+        return FALSE;
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Configured clock: %d, Maximum clock: %d\n",
+                        busSettings.ActualClockRate,
+                        SDDEVICE_GET_MAX_CLOCK(handle)));
+    }
+
+    /*
+     * Check if the target supports block mode. This result of this check
+     * can be used to implement the HIFReadWrite API.
+     */
+    if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) {
+        /* Limit block size to operational block limit or card function
+           capability */
+        maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle),
+                           SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle));
+
+        /* check if the card support multi-block transfers */
+        if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n"));
+
+            /* Limit block size to max byte basis */
+            maxBlockSize =  min(maxBlockSize,
+                                (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS);
+            maxBlocks = 1;
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n"));
+            maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle);
+            status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE);
+            if (!SDIO_SUCCESS(status)) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                                ("Failed to set block size. Err:%d\n", status));
+                return FALSE;
+            }
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Bytes Per Block: %d bytes, Block Count:%d \n",
+                        maxBlockSize, maxBlocks));
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Function does not support Block Mode!\n"));
+        return FALSE;
+    }
+
+    /* Allocate the slot current */
+    status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent);
+    if (SDIO_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n",
+                                slotCurrent.SlotCurrent));
+        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT,
+                                   &slotCurrent, sizeof(slotCurrent));
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Failed to allocate slot current %d\n", status));
+            return FALSE;
+        }
+    }
+
+    /* Enable the dragon function */
+    count = 0;
+    enabled = FALSE;
+    fData.TimeOut = 1;
+    fData.EnableFlags = SDCONFIG_ENABLE_FUNC;
+    while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled)
+    {
+        /* Enable dragon */
+        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+                                   &fData, sizeof(fData));
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Attempting to enable the card again\n"));
+            continue;
+        }
+
+        /* Mark the status as enabled */
+        enabled = TRUE;
+    }
+
+    /* Check if we were succesful in enabling the target */
+    if (!enabled) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Failed to communicate with the target\n"));
+        return FALSE;
+    }
+
+    /* Allocate the bus requests to be used later */
+    A_MEMZERO(busRequest, sizeof(busRequest));
+    for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+        if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n"));
+            /* TODO: Free the memory that has already been allocated */
+            return FALSE;
+        }
+        hifFreeBusRequest(&busRequest[count]);
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                ("0x%08x = busRequest[%d].request = 0x%08x\n",
+				(unsigned int) &busRequest[count], count,
+				(unsigned int) busRequest[count].request));
+    }
+
+        /* Schedule a worker to handle device inserted, this is a temporary workaround
+         * to fix a deadlock if the device fails to intialize in the insertion handler
+         * The failure causes the instance to shutdown the HIF layer and unregister the
+         * function driver within the busdriver probe context which can deadlock
+         *
+         * NOTE: we cannot use the default work queue because that would block
+         * SD bus request processing for all synchronous I/O. We must use a kernel
+         * thread that is creating using the helper library.
+         * */
+
+    if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper,
+                         insert_helper_func,
+                         device))) {
+        device->helper_started = TRUE;
+    }
+
+    return TRUE;
+}
+
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper)
+{
+
+    /*
+     * Adding a wait of around a second before we issue the very first
+     * command to dragon. During the process of loading/unloading the
+     * driver repeatedly it was observed that we get a data timeout
+     * while accessing function 1 registers in the chip. The theory at
+     * this point is that some initialization delay in dragon is
+     * causing the SDIO state in dragon core to be not ready even after
+     * the ready bit indicates that function 1 is ready. Accomodating
+     * for this behavior by adding some delay in the driver before it
+     * issues the first command after switching on dragon. Need to
+     * investigate this a bit more - TODO
+     */
+
+    A_MDELAY(1000);
+        /* Inform HTC */
+    if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n"));
+    }
+
+    return 0;
+}
+
+void
+HIFAckInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Acknowledge our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void
+HIFUnMaskInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Register the IRQ Handler */
+    SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device);
+
+    /* Unmask our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void HIFMaskInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Mask our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+
+    /* Unregister the IRQ Handler */
+    SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL);
+}
+
+static BUS_REQUEST *hifAllocateBusRequest(void)
+{
+    BUS_REQUEST *busrequest;
+
+    /* Acquire lock */
+    CriticalSectionAcquire(&lock);
+
+    /* Remove first in list */
+    if((busrequest = s_busRequestFreeQueue) != NULL)
+    {
+        s_busRequestFreeQueue = busrequest->next;
+    }
+
+    /* Release lock */
+    CriticalSectionRelease(&lock);
+
+    return busrequest;
+}
+
+static void
+hifFreeBusRequest(BUS_REQUEST *busrequest)
+{
+    DBG_ASSERT(busrequest != NULL);
+
+    /* Acquire lock */
+    CriticalSectionAcquire(&lock);
+
+    /* Insert first in list */
+    busrequest->next = s_busRequestFreeQueue;
+    s_busRequestFreeQueue = busrequest;
+
+    /* Release lock */
+    CriticalSectionRelease(&lock);
+}
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle)
+{
+    A_STATUS status;
+    HIF_DEVICE *device;
+    DBG_ASSERT(function != NULL);
+    DBG_ASSERT(handle != NULL);
+
+    device = getHifDevice(handle);
+    status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK);
+
+        /* cleanup the helper thread */
+    if (device->helper_started) {
+        SDLIB_OSDeleteHelper(&device->insert_helper);
+        device->helper_started = FALSE;
+    }
+
+    delHifDevice(handle);
+    DBG_ASSERT(status == A_OK);
+}
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    hifDevice[0].handle = handle;
+    return &hifDevice[0];
+}
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    return &hifDevice[0];
+}
+
+void
+delHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    hifDevice[0].handle = NULL;
+}
+
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device)
+{
+    return &device->handle->Device->dev;
+}
+
+static void ResetAllCards(void)
+{
+    UINT8       data;
+    SDIO_STATUS status;
+    int         i;
+
+    data = SDIO_IO_RESET;
+
+    /* set the I/O CARD reset bit:
+     * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you
+     * set the RES bit in the SDIO_IO_ABORT register.  This bit however "normally" resets the
+     * I/O functions leaving the SDIO core in the same state (as per SDIO spec).
+     * In this design, this reset can be used to reset the SDIO core itself */
+    for (i = 0; i < HIF_MAX_DEVICES; i++) {
+        if (hifDevice[i].handle != NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Issuing I/O Card reset for instance: %d \n",i));
+                /* set the I/O Card reset bit */
+            status = SDLIB_IssueCMD52(hifDevice[i].handle,
+                                      0,                    /* function 0 space */
+                                      SDIO_IO_ABORT_REG,
+                                      &data,
+                                      1,                    /* 1 byte */
+                                      TRUE);                /* write */
+        }
+    }
+
+}
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+    HIF_DEVICE *device = (HIF_DEVICE *) hif_handle;
+
+    device->htc_handle = handle;
+
+    return;
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif2.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif2.c
new file mode 100644
index 0000000..386d96e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif2.c
@@ -0,0 +1,768 @@
+/*
+ * hif2.c - HIF layer re-implementation for the Linux SDIO stack
+ *
+ * Copyright (C) 2008, 2009 by OpenMoko, Inc.
+ * Written by Werner Almesberger <werner@openmoko.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Based on:
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+
+
+/* @@@ Hack - this wants cleaning up */
+
+#ifdef CONFIG_MACH_NEO1973_GTA02
+
+#include <mach/gta02-pm-wlan.h>
+
+#else /* CONFIG_MACH_NEO1973_GTA02 */
+
+#define	gta02_wlan_query_rfkill_lock()  1
+#define	gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb)
+#define	gta02_wlan_query_rfkill_unlock()
+#define	gta02_wlan_clear_rfkill_cb()
+
+#endif /* !CONFIG_MACH_NEO1973_GTA02 */
+
+
+/*
+ * KNOWN BUGS:
+ *
+ * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors)
+ * - latency can reach hundreds of ms, probably because of scheduling delays
+ * - packets go through about three queues before finally hitting the network
+ */
+
+/*
+ * Differences from Atheros' HIFs:
+ *
+ * - synchronous and asynchronous requests may get reordered with respect to
+ *   each other, e.g., if HIFReadWrite returns for an asynchronous request and
+ *   then HIFReadWrite is called for a synchronous request, the synchronous
+ *   request may be executed before the asynchronous request.
+ *
+ * - request queue locking seems unnecessarily complex in the Atheros HIFs.
+ *
+ * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which
+ *   can cause quite a bit of overhead. This HIF has its own light-weight
+ *   interrupt masking.
+ *
+ * - Atheros call deviceInsertedHandler from a thread spawned off the probe or
+ *   device insertion function. The original explanation for the Atheros SDIO
+ *   stack said that this is done because a delay is needed to let the chip
+ *   complete initialization. There is indeed a one second delay in the thread.
+ *
+ *   The Atheros Linux SDIO HIF removes the delay and only retains the thread.
+ *   Experimentally removing the thread didn't show any conflicts, so let's get
+ *   rid of it for good.
+ *
+ * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in
+ *   SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't
+ *   either, and this seems to work fine.
+ *   @@@ Need to check this with Atheros.
+ */
+
+
+#define MBOXES			4
+
+#define HIF_MBOX_BLOCK_SIZE	128
+#define	HIF_MBOX_BASE_ADDR	0x800
+#define	HIF_MBOX_WIDTH		0x800
+#define	HIF_MBOX_START_ADDR(mbox) \
+    (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH)
+
+
+struct hif_device {
+	void *htc_handle;
+	struct sdio_func *func;
+
+	/*
+	 * @@@ our sweet little bit of bogosity - the mechanism that lets us
+	 * use the SDIO stack from softirqs. This really wants to use skbs.
+	 */
+	struct list_head queue;
+	spinlock_t queue_lock;
+	struct task_struct *io_task;
+	wait_queue_head_t wait;
+
+	/*
+	 * activate_lock protects "active" and the activation/deactivation
+	 * process itself.
+	 *
+	 * Relation to other locks: The SDIO function can be claimed while
+	 * activate_lock is being held, but trying to acquire activate_lock
+	 * while having ownership of the SDIO function could cause a deadlock.
+	 */
+	int active;
+	struct mutex activate_lock;
+};
+
+struct hif_request {
+	struct list_head list;
+	struct sdio_func *func;
+	int (*read)(struct sdio_func *func,
+	    void *dst, unsigned int addr, int count);
+	int (*write)(struct sdio_func *func,
+	    unsigned int addr, void *src, int count);
+	void *buf;
+	unsigned long addr;
+	int len;
+	A_STATUS (*completion)(void *context, A_STATUS status);
+	void *context;
+};
+
+
+static HTC_CALLBACKS htcCallbacks;
+
+/*
+ * shutdown_lock prevents recursion through HIFShutDownDevice
+ */
+static DEFINE_MUTEX(shutdown_lock);
+
+
+/* ----- Request processing ------------------------------------------------ */
+
+
+static A_STATUS process_request(struct hif_request *req)
+{
+	int ret;
+	A_STATUS status;
+
+	dev_dbg(&req->func->dev, "process_request(req %p)\n", req);
+	sdio_claim_host(req->func);
+	if (req->read) {
+		ret = req->read(req->func, req->buf, req->addr, req->len);
+	} else {
+		ret = req->write(req->func, req->addr, req->buf, req->len);
+	}
+	sdio_release_host(req->func);
+	status = ret ? A_ERROR : A_OK;
+	if (req->completion)
+		req->completion(req->context, status);
+	kfree(req);
+	return status;
+}
+
+
+static void enqueue_request(struct hif_device *hif, struct hif_request *req)
+{
+	unsigned long flags;
+
+	dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req);
+	spin_lock_irqsave(&hif->queue_lock, flags);
+	list_add_tail(&req->list, &hif->queue);
+	spin_unlock_irqrestore(&hif->queue_lock, flags);
+	wake_up(&hif->wait);
+}
+
+
+static struct hif_request *dequeue_request(struct hif_device *hif)
+{
+	struct hif_request *req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hif->queue_lock, flags);
+	if (list_empty(&hif->queue))
+		req = NULL;
+	else {
+		req = list_first_entry(&hif->queue,
+		    struct hif_request, list);
+		list_del(&req->list);
+	}
+	spin_unlock_irqrestore(&hif->queue_lock, flags);
+	return req;
+}
+
+
+static void wait_queue_empty(struct hif_device *hif)
+{
+	unsigned long flags;
+	int empty;
+
+	while (1) {
+		spin_lock_irqsave(&hif->queue_lock, flags);
+		empty = list_empty(&hif->queue);
+		spin_unlock_irqrestore(&hif->queue_lock, flags);
+		if (empty)
+			break;
+		else
+			yield();
+	}
+}
+
+
+static int io(void *data)
+{
+	struct hif_device *hif = data;
+	struct sched_param param = { .sched_priority = 2 };
+		/* one priority level slower than ksdioirqd (which is at 1) */
+	DEFINE_WAIT(wait);
+	struct hif_request *req;
+
+	sched_setscheduler(current, SCHED_FIFO, &param);
+
+	while (1) {
+		while (1) {
+			/*
+			 * Since we never use signals here, one might think
+			 * that this ought to be TASK_UNINTERRUPTIBLE. However,
+			 * such a task would increase the load average and,
+			 * worse, it would trigger the softlockup check.
+			 */
+			prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE);
+			if (kthread_should_stop()) {
+				finish_wait(&hif->wait, &wait);
+				return 0;
+			}
+			req = dequeue_request(hif);
+			if (req)
+				break;
+			schedule();
+		}
+		finish_wait(&hif->wait, &wait);
+
+		(void) process_request(req);
+	}
+	return 0;
+}
+
+
+A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer,
+    A_UINT32 length, A_UINT32 request, void *context)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+	struct hif_request *req;
+
+	dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, "
+	    "length %d, request 0x%x, context %p)\n",
+	    hif, address, buffer, length, request, context);
+
+	BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)));
+	BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)));
+	BUG_ON(!(request & (HIF_READ | HIF_WRITE)));
+	BUG_ON(!(request & HIF_EXTENDED_IO));
+
+	if (address >= HIF_MBOX_START_ADDR(0) &&
+	    address < HIF_MBOX_START_ADDR(MBOXES+1)) {
+		BUG_ON(length > HIF_MBOX_WIDTH);
+		/* Adjust the address so that the last byte falls on the EOM
+		   address. */
+		address += HIF_MBOX_WIDTH-length;
+	}
+
+	req = kzalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		if (request & HIF_ASYNCHRONOUS)
+			htcCallbacks.rwCompletionHandler(context, A_ERROR);
+		return A_ERROR;
+	}
+
+	req->func = hif->func;
+	req->addr = address;
+	req->buf = buffer;
+	req->len = length;
+
+	if (request & HIF_READ) {
+		if (request & HIF_FIXED_ADDRESS)
+			req->read = sdio_readsb;
+		else
+			req->read = sdio_memcpy_fromio;
+	} else {
+		if (request & HIF_FIXED_ADDRESS)
+			req->write = sdio_writesb;
+		else
+			req->write = sdio_memcpy_toio;
+	}
+
+	if (!(request & HIF_ASYNCHRONOUS))
+		return process_request(req);
+
+	req->completion = htcCallbacks.rwCompletionHandler;
+	req->context = context;
+	enqueue_request(hif, req);
+
+	return A_OK;
+}
+
+
+/* ----- Interrupt handling ------------------------------------------------ */
+
+/*
+ * Volatile ought to be good enough to make gcc do the right thing on S3C24xx.
+ * No need to use atomic or put barriers, keeping the code more readable.
+ *
+ * Warning: this story changes if going SMP/SMT.
+ */
+
+static volatile int masked = 1;
+static volatile int pending;
+static volatile int in_interrupt;
+
+
+static void ar6000_do_irq(struct sdio_func *func)
+{
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+	struct device *dev = HIFGetOSDevice(hif);
+	A_STATUS status;
+
+	dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler);
+
+	status = htcCallbacks.dsrHandler(hif->htc_handle);
+	BUG_ON(status != A_OK);
+}
+
+
+static void sdio_ar6000_irq(struct sdio_func *func)
+{
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "sdio_ar6000_irq\n");
+
+	in_interrupt = 1;
+	if (masked) {
+		in_interrupt = 0;
+		pending++;
+		return;
+	}
+	/*
+	 * @@@ This is ugly. If we don't drop the lock, we'll deadlock when
+	 * the handler tries to do SDIO. So there are four choices:
+	 *
+	 * 1) Break the call chain by calling the callback from a workqueue.
+	 *    Ugh.
+	 * 2) Make process_request aware that we already have the lock.
+	 * 3) Drop the lock. Which is ugly but should be safe as long as we're
+	 *    making sure the device doesn't go away.
+	 * 4) Change the AR6k driver such that it only issues asynchronous
+	 *    quests when called from an interrupt.
+	 *
+	 * Solution 2) is probably the best for now. Will try it later.
+	 */
+	sdio_release_host(func);
+	ar6000_do_irq(func);
+	sdio_claim_host(func);
+	in_interrupt = 0;
+}
+
+
+void HIFAckInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFAckInterrupt\n");
+	/* do nothing */
+}
+
+
+void HIFUnMaskInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFUnMaskInterrupt\n");
+	do {
+		masked = 1;
+		if (pending) {
+			pending = 0;
+			ar6000_do_irq(hif->func);
+			/* We may take an interrupt before unmasking and thus
+			   get it pending. In this case, we just loop back. */
+		}
+		masked = 0;
+	}
+	while (pending);
+}
+
+
+void HIFMaskInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFMaskInterrupt\n");
+	/*
+	 * Since sdio_ar6000_irq can also be called from a process context, we
+	 * may conceivably end up racing with it. Thus, we need to wait until
+	 * we can be sure that no concurrent interrupt processing is going on
+	 * before we return.
+	 *
+	 * Note: this may be a bit on the paranoid side - the callers may
+	 * actually be nice enough to disable scheduling. Check later.
+	 */
+	masked = 1;
+	while (in_interrupt)
+		yield();
+}
+
+
+/* ----- HIF API glue functions -------------------------------------------- */
+
+
+struct device *HIFGetOSDevice(HIF_DEVICE *hif)
+{
+	return &hif->func->dev;
+}
+
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+	HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle;
+
+	hif->htc_handle = handle;
+}
+
+
+/* ----- Device configuration (HIF side) ----------------------------------- */
+
+
+A_STATUS HIFConfigureDevice(HIF_DEVICE *hif,
+    HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+	HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config;
+	A_UINT32 *mbs_cfg = config;
+	int i;
+
+	dev_dbg(dev, "HIFConfigureDevice\n");
+
+	switch (opcode) {
+	case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+		for (i = 0; i != MBOXES; i++)
+			mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE;
+		break;
+	case HIF_DEVICE_GET_MBOX_ADDR:
+		for (i = 0; i != MBOXES; i++)
+			mbs_cfg[i] = HIF_MBOX_START_ADDR(i);
+		break;
+	case HIF_DEVICE_GET_IRQ_PROC_MODE:
+		*ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY;
+//		*ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC;
+		break;
+	default:
+		return A_ERROR;
+	}
+	return A_OK;
+}
+
+
+/* ----- Device probe and removal (Linux side) ----------------------------- */
+
+
+static int ar6000_do_activate(struct hif_device *hif)
+{
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+	int ret;
+
+	dev_dbg(dev, "ar6000_do_activate\n");
+
+	sdio_claim_host(func);
+	sdio_enable_func(func);
+
+	INIT_LIST_HEAD(&hif->queue);
+	init_waitqueue_head(&hif->wait);
+	spin_lock_init(&hif->queue_lock);
+
+	ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
+	if (ret < 0) {
+		dev_err(dev, "sdio_set_block_size returns %d\n", ret);
+		goto out_enabled;
+	}
+	ret = sdio_claim_irq(func, sdio_ar6000_irq);
+	if (ret) {
+		dev_err(dev, "sdio_claim_irq returns %d\n", ret);
+		goto out_enabled;
+	}
+	/* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */
+#if 0
+	sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret);
+	if (ret) {
+		dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n",
+		    ret);
+		goto out_got_irq;
+	}
+#else
+	if (0) /* avoid warning */
+		goto out_got_irq;
+#endif
+
+	sdio_release_host(func);
+
+	hif->io_task = kthread_run(io, hif, "ar6000_io");
+	ret = IS_ERR(hif->io_task);
+	if (ret) {
+		dev_err(dev, "kthread_run(ar6000_io): %d\n", ret);
+		goto out_func_ready;
+	}
+
+	ret = htcCallbacks.deviceInsertedHandler(hif);
+	if (ret == A_OK)
+		return 0;
+
+	dev_err(dev, "deviceInsertedHandler: %d\n", ret);
+
+	ret = kthread_stop(hif->io_task);
+	if (ret)
+		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+
+out_func_ready:
+	sdio_claim_host(func);
+
+out_got_irq:
+	sdio_release_irq(func);
+
+out_enabled:
+	sdio_disable_func(func);
+	sdio_release_host(func);
+
+	return ret;
+}
+
+
+static void ar6000_do_deactivate(struct hif_device *hif)
+{
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+	int ret;
+
+	dev_dbg(dev, "ar6000_do_deactivate\n");
+	if (!hif->active)
+		return;
+
+	if (mutex_trylock(&shutdown_lock)) {
+		/*
+		 * Funny, Atheros' HIF does this call, but this just puts us in
+		 * a recursion through HTCShutDown/HIFShutDown if unloading the
+		 * module.
+		 *
+		 * However, we need it for suspend/resume. See the comment at
+		 * HIFShutDown, below.
+		 */
+		ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK);
+		if (ret != A_OK)
+			dev_err(dev, "deviceRemovedHandler: %d\n", ret);
+		mutex_unlock(&shutdown_lock);
+	}
+	wait_queue_empty(hif);
+	ret = kthread_stop(hif->io_task);
+	if (ret)
+		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+}
+
+
+static int ar6000_activate(struct hif_device *hif)
+{
+	int ret = 0;
+
+	dev_dbg(&hif->func->dev, "ar6000_activate\n");
+	mutex_lock(&hif->activate_lock);
+	if (!hif->active) {
+		ret = ar6000_do_activate(hif);
+		if (ret) {
+			printk(KERN_ERR "%s: Failed to activate %d\n",
+				__func__, ret);
+			goto out;
+		}
+		hif->active = 1;
+	}
+out:
+	mutex_unlock(&hif->activate_lock);
+	return ret;
+}
+
+
+static void ar6000_deactivate(struct hif_device *hif)
+{
+	dev_dbg(&hif->func->dev, "ar6000_deactivate\n");
+	mutex_lock(&hif->activate_lock);
+	if (hif->active) {
+		ar6000_do_deactivate(hif);
+		hif->active = 0;
+	}
+	mutex_unlock(&hif->activate_lock);
+}
+
+
+static int ar6000_rfkill_cb(void *data, int on)
+{
+	struct hif_device *hif = data;
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+
+	dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on);
+	if (on)
+		return ar6000_activate(hif);
+	ar6000_deactivate(hif);
+	return 0;
+}
+
+
+static int sdio_ar6000_probe(struct sdio_func *func,
+    const struct sdio_device_id *id)
+{
+	struct device *dev = &func->dev;
+	struct hif_device *hif;
+	int ret = 0;
+
+	dev_dbg(dev, "sdio_ar6000_probe\n");
+	BUG_ON(!htcCallbacks.deviceInsertedHandler);
+
+	hif = kzalloc(sizeof(*hif), GFP_KERNEL);
+	if (!hif)
+		return -ENOMEM;
+
+	sdio_set_drvdata(func, hif);
+	hif->func = func;
+	mutex_init(&hif->activate_lock);
+	hif->active = 0;
+
+	if (gta02_wlan_query_rfkill_lock())
+		ret = ar6000_activate(hif);
+	if (!ret) {
+		gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif);
+		return 0;
+	}
+	gta02_wlan_query_rfkill_unlock();
+	sdio_set_drvdata(func, NULL);
+	kfree(hif);
+	return ret;
+}
+
+
+static void sdio_ar6000_remove(struct sdio_func *func)
+{
+	struct device *dev = &func->dev;
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+
+	dev_dbg(dev, "sdio_ar6000_remove\n");
+	gta02_wlan_clear_rfkill_cb();
+	ar6000_deactivate(hif);
+	sdio_set_drvdata(func, NULL);
+	kfree(hif);
+}
+
+
+/* ----- Device registration/unregistration (called by HIF) ---------------- */
+
+
+#define ATHEROS_SDIO_DEVICE(id, offset) \
+    SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset))
+
+static const struct sdio_device_id sdio_ar6000_ids[] = {
+	{ ATHEROS_SDIO_DEVICE(AR6002, 0)	},
+	{ ATHEROS_SDIO_DEVICE(AR6002, 0x1)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0x8)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0x9)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0xa)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0xb)	},
+	{ /* end: all zeroes */			},
+};
+
+MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids);
+
+
+static struct sdio_driver sdio_ar6000_driver = {
+	.probe		= sdio_ar6000_probe,
+	.remove		= sdio_ar6000_remove,
+	.name		= "sdio_ar6000",
+	.id_table	= sdio_ar6000_ids,
+};
+
+
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+	int ret;
+
+	BUG_ON(!callbacks);
+
+	printk(KERN_DEBUG "HIFInit\n");
+	htcCallbacks = *callbacks;
+
+	ret = sdio_register_driver(&sdio_ar6000_driver);
+	if (ret) {
+		printk(KERN_ERR
+		    "sdio_register_driver(sdio_ar6000_driver): %d\n", ret);
+		return A_ERROR;
+	}
+
+	return 0;
+}
+
+
+/*
+ * We have four possible call chains here:
+ *
+ * System shutdown/reboot:
+ *
+ *   kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown ->
+ *     mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove ->
+ *     ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   This is roughly the same sequence as suspend, described below.
+ *
+ * Module removal:
+ *
+ *   sys_delete_module -> ar6000_cleanup_module -> HTCShutDown ->
+ *     HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove ->
+ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate
+ *
+ *   In this case, HIFShutDownDevice must call sdio_unregister_driver to
+ *   notify the driver about its removal. ar6000_do_deactivate must not call
+ *   deviceRemovedHandler, because that would loop back into HIFShutDownDevice.
+ *
+ * Suspend:
+ *
+ *   device_suspend ...> s3cmci_suspend ...> sdio_bus_remove ->
+ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   We must call deviceRemovedHandler to inform the ar6k stack that the device
+ *   has been removed. Since HTCTargetRemovedHandler calls back into
+ *   HIFShutDownDevice, we must also prevent the call to
+ *   sdio_unregister_driver, or we'd end up recursing into the SDIO stack,
+ *   eventually deadlocking somewhere.
+ *
+ * rfkill:
+ *
+ *   rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio ->
+ *   ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   This is similar to suspend - only the entry point changes.
+ */
+
+void HIFShutDownDevice(HIF_DEVICE *hif)
+{
+	/* Beware, HTCShutDown calls us with hif == NULL ! */
+	if (mutex_trylock(&shutdown_lock)) {
+		sdio_unregister_driver(&sdio_ar6000_driver);
+		mutex_unlock(&shutdown_lock);
+	}
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif_internal.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif_internal.h
new file mode 100644
index 0000000..d8fc101
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/hif/hif_internal.h
@@ -0,0 +1,102 @@
+/*
+ * @file: hif_internal.h
+ *
+ * @abstract: internal header file for hif layer
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <linux/sdio/ctsystem.h>
+#include <linux/sdio/sdio_busdriver.h>
+#include <linux/sdio/_sdio_defs.h>
+#include <linux/sdio/sdio_lib.h>
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "hif.h"
+
+#define MANUFACTURER_ID_AR6001_BASE        0x100
+#define MANUFACTURER_ID_AR6002_BASE        0x200
+#define FUNCTION_CLASS                     0x0
+#define MANUFACTURER_CODE                  0x271
+
+#define BUS_REQUEST_MAX_NUM                64
+
+#define SDIO_CLOCK_FREQUENCY_DEFAULT       25000000
+#define SDWLAN_ENABLE_DISABLE_TIMEOUT      20
+#define FLAGS_CARD_ENAB                    0x02
+#define FLAGS_CARD_IRQ_UNMSK               0x04
+
+#define HIF_MBOX_BLOCK_SIZE                128
+#define HIF_MBOX_BASE_ADDR                 0x800
+#define HIF_MBOX_WIDTH                     0x800
+#define HIF_MBOX0_BLOCK_SIZE               1
+#define HIF_MBOX1_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX2_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX3_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+
+#define HIF_MBOX_START_ADDR(mbox)                        \
+    HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH
+
+#define HIF_MBOX_END_ADDR(mbox)	                         \
+    HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1
+
+struct hif_device {
+    SDDEVICE *handle;
+    void *htc_handle;
+    OSKERNEL_HELPER insert_helper;
+    BOOL  helper_started;
+};
+
+typedef struct target_function_context {
+    SDFUNCTION           function; /* function description of the bus driver */
+    OS_SEMAPHORE         instanceSem; /* instance lock. Unused */
+    SDLIST               instanceList; /* list of instances. Unused */
+} TARGET_FUNCTION_CONTEXT;
+
+typedef struct bus_request {
+    struct bus_request *next;
+    SDREQUEST *request;
+    void *context;
+} BUS_REQUEST;
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device);
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device);
+
+SDREQUEST *
+hifAllocateDeviceRequest(SDDEVICE *device);
+
+void
+hifFreeDeviceRequest(SDREQUEST *request);
+
+void
+hifRWCompletionHandler(SDREQUEST *request);
+
+void
+hifIRQHandler(void *context);
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle);
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle);
+
+void
+delHifDevice(SDDEVICE *handle);
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.c
new file mode 100644
index 0000000..72472ab
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.c
@@ -0,0 +1,991 @@
+/*
+ * AR6K device layer that handles register level I/O
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+#define MAILBOX_FOR_BLOCK_SIZE 1
+
+extern A_UINT32 resetok;
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
+
+#define LOCK_AR6K(p)      A_MUTEX_LOCK(&(p)->Lock);
+#define UNLOCK_AR6K(p)    A_MUTEX_UNLOCK(&(p)->Lock);
+
+void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
+{
+    LOCK_AR6K(pDev);
+    HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
+    UNLOCK_AR6K(pDev);
+}
+
+HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
+{
+    HTC_PACKET *pPacket;
+
+    LOCK_AR6K(pDev);
+    pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
+    UNLOCK_AR6K(pDev);
+
+    return pPacket;
+}
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev)
+{
+    A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
+    A_UINT32 blocksizes[AR6K_MAILBOXES];
+    A_STATUS status = A_OK;
+    int      i;
+
+    AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
+    AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
+
+    do {
+            /* give a handle to HIF for this target */
+        HIFSetHandle(pDev->HIFDevice, (void *)pDev);
+            /* initialize our free list of IO packets */
+        INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
+        A_MUTEX_INIT(&pDev->Lock);
+
+            /* get the addresses for all 4 mailboxes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+                                    mailboxaddrs, sizeof(mailboxaddrs));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* carve up register I/O packets (these are for ASYNC register I/O ) */
+        for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
+            HTC_PACKET *pIOPacket;
+            pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
+            SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
+                                          pDev,
+                                          pDev->RegIOBuffers[i].Buffer,
+                                          AR6K_REG_IO_BUFFER_SIZE,
+                                          0); /* don't care */
+            AR6KFreeIOPacket(pDev,pIOPacket);
+        }
+
+            /* get the address of the mailbox we are using */
+        pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
+
+            /* get the block sizes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    blocksizes, sizeof(blocksizes));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
+             * size on mailbox 0 is artificially set to 1.  So we use the block size that is set
+             * for the other 3 mailboxes */
+        pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
+            /* must be a power of 2 */
+        AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
+
+            /* assemble mask, used for padding to a block */
+        pDev->BlockMask = pDev->BlockSize - 1;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
+                    pDev->BlockSize, pDev->MailboxAddress));
+
+        pDev->GetPendingEventsFunc = NULL;
+            /* see if the HIF layer implements the get pending events function  */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+                           &pDev->GetPendingEventsFunc,
+                           sizeof(pDev->GetPendingEventsFunc));
+
+            /* assume we can process HIF interrupt events asynchronously */
+        pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
+
+            /* see if the HIF layer overrides this assumption */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_IRQ_PROC_MODE,
+                           &pDev->HifIRQProcessingMode,
+                           sizeof(pDev->HifIRQProcessingMode));
+
+        switch (pDev->HifIRQProcessingMode) {
+            case HIF_DEVICE_IRQ_SYNC_ONLY:
+                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
+                break;
+            case HIF_DEVICE_IRQ_ASYNC_SYNC:
+                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
+                break;
+            default:
+                AR_DEBUG_ASSERT(FALSE);
+        }
+
+        pDev->HifMaskUmaskRecvEvent = NULL;
+
+            /* see if the HIF layer implements the mask/unmask recv events function  */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+                           &pDev->HifMaskUmaskRecvEvent,
+                           sizeof(pDev->HifMaskUmaskRecvEvent));
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
+                 (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
+
+        status = DevDisableInterrupts(pDev);
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+            /* make sure handle is cleared */
+        HIFSetHandle(pDev->HIFDevice, NULL);
+    }
+
+    return status;
+
+}
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
+{
+    A_STATUS                  status;
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+    LOCK_AR6K(pDev);
+
+        /* Enable all the interrupts except for the dragon interrupt */
+    pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
+                                      INT_STATUS_ENABLE_CPU_SET(0x01) |
+                                      INT_STATUS_ENABLE_COUNTER_SET(0x01);
+
+    if (NULL == pDev->GetPendingEventsFunc) {
+        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    } else {
+        /* The HIF layer provided us with a pending events function which means that
+         * the detection of pending mbox messages is handled in the HIF layer.
+         * This is the case for the SPI2 interface.
+         * In the normal case we enable MBOX interrupts, for the case
+         * with HIFs that offer this mechanism, we keep these interrupts
+         * masked */
+        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    }
+
+
+    /* Set up the CPU Interrupt Status Register */
+    pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
+
+    /* Set up the Error Interrupt Status Register */
+    pDev->IrqEnableRegisters.error_status_enable =
+                                  ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
+                                  ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
+
+    /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
+    pDev->IrqEnableRegisters.counter_int_status_enable =
+        COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
+
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+    UNLOCK_AR6K(pDev);
+
+        /* always synchronous */
+    status = HIFReadWrite(pDev->HIFDevice,
+                          INT_STATUS_ENABLE_ADDRESS,
+                          &regs.int_status_enable,
+                          AR6K_IRQ_ENABLE_REGS_SIZE,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        /* Can't write it for some reason */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                        ("Failed to update interrupt control registers err: %d\n", status));
+
+    }
+
+    return status;
+}
+
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
+{
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+    LOCK_AR6K(pDev);
+        /* Disable all interrupts */
+    pDev->IrqEnableRegisters.int_status_enable = 0;
+    pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
+    pDev->IrqEnableRegisters.error_status_enable = 0;
+    pDev->IrqEnableRegisters.counter_int_status_enable = 0;
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+    UNLOCK_AR6K(pDev);
+
+        /* always synchronous */
+    return HIFReadWrite(pDev->HIFDevice,
+                        INT_STATUS_ENABLE_ADDRESS,
+                        &regs.int_status_enable,
+                        AR6K_IRQ_ENABLE_REGS_SIZE,
+                        HIF_WR_SYNC_BYTE_INC,
+                        NULL);
+}
+
+/* enable device interrupts */
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
+{
+        /* Unmask the host controller interrupts */
+    HIFUnMaskInterrupt(pDev->HIFDevice);
+
+    return DevEnableInterrupts(pDev);
+}
+
+/* disable all device interrupts */
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+
+    status = DevDisableInterrupts(pDev);
+
+    if (A_SUCCESS(status)) {
+            /* Disable the interrupt at the HIF layer */
+        HIFMaskInterrupt(pDev->HIFDevice);
+    }
+
+    return status;
+}
+
+/* callback when our fetch to enable/disable completes */
+static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    if (A_FAILED(pPacket->Status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Failed to disable receiver, status:%d \n", pPacket->Status));
+    }
+        /* free this IO packet */
+    AR6KFreeIOPacket(pDev,pPacket);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "override" method when the HIF reports another methods to
+ * disable recv events */
+static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+    A_STATUS                  status = A_OK;
+    HTC_PACKET                *pIOPacket = NULL;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
+            EnableRecv,AsyncMode));
+
+    do {
+
+        if (AsyncMode) {
+
+            pIOPacket = AR6KAllocIOPacket(pDev);
+
+            if (NULL == pIOPacket) {
+                status = A_NO_MEMORY;
+                AR_DEBUG_ASSERT(FALSE);
+                break;
+            }
+
+                /* stick in our completion routine when the I/O operation completes */
+            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+            pIOPacket->pContext = pDev;
+
+                /* call the HIF layer override and do this asynchronously */
+            status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+                                                 EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+                                                 pIOPacket);
+            break;
+        }
+
+            /* if we get here we are doing it synchronously */
+        status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+                                             EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+                                             NULL);
+
+    } while (FALSE);
+
+    if (A_FAILED(status) && (pIOPacket != NULL)) {
+        AR6KFreeIOPacket(pDev,pIOPacket);
+    }
+
+    return status;
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "normal" method using the interrupt enable registers through
+ * the host I/F */
+static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+    A_STATUS                  status = A_OK;
+    HTC_PACKET                *pIOPacket = NULL;
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+        /* take the lock to protect interrupt enable shadows */
+    LOCK_AR6K(pDev);
+
+    if (EnableRecv) {
+        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    } else {
+        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    }
+
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+    UNLOCK_AR6K(pDev);
+
+    do {
+
+        if (AsyncMode) {
+
+            pIOPacket = AR6KAllocIOPacket(pDev);
+
+            if (NULL == pIOPacket) {
+                status = A_NO_MEMORY;
+                AR_DEBUG_ASSERT(FALSE);
+                break;
+            }
+
+                /* copy values to write to our async I/O buffer */
+            A_MEMCPY(pIOPacket->pBuffer,&regs,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+                /* stick in our completion routine when the I/O operation completes */
+            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+            pIOPacket->pContext = pDev;
+
+                /* write it out asynchronously */
+            HIFReadWrite(pDev->HIFDevice,
+                         INT_STATUS_ENABLE_ADDRESS,
+                         pIOPacket->pBuffer,
+                         AR6K_IRQ_ENABLE_REGS_SIZE,
+                         HIF_WR_ASYNC_BYTE_INC,
+                         pIOPacket);
+            break;
+        }
+
+        /* if we get here we are doing it synchronously */
+
+        status = HIFReadWrite(pDev->HIFDevice,
+                              INT_STATUS_ENABLE_ADDRESS,
+                              &regs.int_status_enable,
+                              AR6K_IRQ_ENABLE_REGS_SIZE,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+    } while (FALSE);
+
+    if (A_FAILED(status) && (pIOPacket != NULL)) {
+        AR6KFreeIOPacket(pDev,pIOPacket);
+    }
+
+    return status;
+}
+
+
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+    if (NULL == pDev->HifMaskUmaskRecvEvent) {
+        return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
+    } else {
+        return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
+    }
+}
+
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+    if (NULL == pDev->HifMaskUmaskRecvEvent) {
+        return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
+    } else {
+        return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
+    }
+}
+
+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
+                      AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
+{
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
+
+    if (pIrqProcRegs != NULL) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Int Status:               0x%x\n",pIrqProcRegs->host_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("CPU Int Status:            0x%x\n",pIrqProcRegs->cpu_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Error Int Status:          0x%x\n",pIrqProcRegs->error_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Counter Int Status:        0x%x\n",pIrqProcRegs->counter_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Mbox Frame:                0x%x\n",pIrqProcRegs->mbox_frame));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead Valid:        0x%x\n",pIrqProcRegs->rx_lookahead_valid));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead 0:            0x%x\n",pIrqProcRegs->rx_lookahead[0]));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead 1:            0x%x\n",pIrqProcRegs->rx_lookahead[1]));
+    }
+
+    if (pIrqEnableRegs != NULL) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Int Status Enable:         0x%x\n",pIrqEnableRegs->int_status_enable));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
+    }
+}
+
+
+#ifdef MBOXHW_UNIT_TEST
+
+
+/* This is a mailbox hardware unit test that must be called in a schedulable context
+ * This test is very simple, it will send a list of buffers with a counting pattern
+ * and the target will invert the data and send the message back
+ *
+ * the unit test has the following constraints:
+ *
+ * The target has at least 8 buffers of 256 bytes each. The host will send
+ * the following pattern of buffers in rapid succession :
+ *
+ * 1 buffer - 128 bytes
+ * 1 buffer - 256 bytes
+ * 1 buffer - 512 bytes
+ * 1 buffer - 1024 bytes
+ *
+ * The host will send the buffers to one mailbox and wait for buffers to be reflected
+ * back from the same mailbox. The target sends the buffers FIFO order.
+ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
+ *
+ *
+ * Note:  To simplifythe test , we assume that the chosen buffer sizes
+ *        will fall on a nice block pad
+ *
+ * It is expected that higher-order tests will be written to stress the mailboxes using
+ * a message-based protocol (with some performance timming) that can create more
+ * randomness in the packets sent over mailboxes.
+ *
+ * */
+
+#define A_ROUND_UP_PWR2(x, align)    (((int) (x) + ((align)-1)) & ~((align)-1))
+
+#define BUFFER_BLOCK_PAD 128
+
+#if 0
+#define BUFFER1 128
+#define BUFFER2 256
+#define BUFFER3 512
+#define BUFFER4 1024
+#endif
+
+#if 1
+#define BUFFER1 80
+#define BUFFER2 200
+#define BUFFER3 444
+#define BUFFER4 800
+#endif
+
+#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
+
+#define TEST_BYTES (BUFFER1 +  BUFFER2 + BUFFER3 + BUFFER4)
+
+#define TEST_CREDITS_RECV_TIMEOUT 100
+
+static A_UINT8  g_Buffer[TOTAL_BYTES];
+static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
+static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
+
+#define BUFFER_PROC_LIST_DEPTH 4
+
+typedef struct _BUFFER_PROC_LIST{
+    A_UINT8  *pBuffer;
+    A_UINT32 length;
+}BUFFER_PROC_LIST;
+
+
+#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
+{                                                   \
+    (pList)->pBuffer = (pCurrpos);                  \
+    (pList)->length = (len);                        \
+    (pCurrpos) += (len);                            \
+    (pList)++;                                      \
+}
+
+/* a simple and crude way to send different "message" sizes */
+static void AssembleBufferList(BUFFER_PROC_LIST *pList)
+{
+    A_UINT8 *pBuffer = g_Buffer;
+
+#if BUFFER_PROC_LIST_DEPTH < 4
+#error "Buffer processing list depth is not deep enough!!"
+#endif
+
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
+
+}
+
+#define FILL_ZERO     TRUE
+#define FILL_COUNTING FALSE
+static void InitBuffers(A_BOOL Zero)
+{
+    A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
+    int      i;
+
+        /* fill buffer with 16 bit counting pattern or zeros */
+    for (i = 0; i <  (TOTAL_BYTES / 2) ; i++) {
+        if (!Zero) {
+            pBuffer16[i] = (A_UINT16)i;
+        } else {
+            pBuffer16[i] = 0;
+        }
+    }
+}
+
+
+static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
+{
+    int      i;
+    A_UINT16 startCount;
+    A_BOOL   success = TRUE;
+
+        /* get the starting count */
+    startCount = pBuffer16[0];
+        /* invert it, this is the expected value */
+    startCount = ~startCount;
+        /* scan the buffer and verify */
+    for (i = 0; i < (Length / 2) ; i++,startCount++) {
+            /* target will invert all the data */
+        if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
+            success = FALSE;
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
+                        pBuffer16[i], ((A_UINT16)~startCount), i, Length));
+             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
+                        pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
+            break;
+        }
+    }
+
+    return success;
+}
+
+static A_BOOL CheckBuffers(void)
+{
+    int      i;
+    A_BOOL   success = TRUE;
+    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+        /* assemble the list */
+    AssembleBufferList(checkList);
+
+        /* scan the buffers and verify */
+    for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
+        success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
+        if (!success) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
+                        (A_UINT32)checkList[i].pBuffer, checkList[i].length));
+            break;
+        }
+    }
+
+    return success;
+}
+
+    /* find the end marker for the last buffer we will be sending */
+static A_UINT16 GetEndMarker(void)
+{
+    A_UINT8  *pBuffer;
+    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+        /* fill up buffers with the normal counting pattern */
+    InitBuffers(FILL_COUNTING);
+
+        /* assemble the list we will be sending down */
+    AssembleBufferList(checkList);
+        /* point to the last 2 bytes of the last buffer */
+    pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
+
+        /* the last count in the last buffer is the marker */
+    return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
+}
+
+#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
+
+/* send the ordered buffers to the target */
+static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS         status = A_OK;
+    A_UINT32         request = HIF_WR_SYNC_BLOCK_INC;
+    BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
+    int              i;
+    int              totalBytes = 0;
+    int              paddedLength;
+    int              totalwPadding = 0;
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
+
+        /* fill buffer with counting pattern */
+    InitBuffers(FILL_COUNTING);
+
+        /* assemble the order in which we send */
+    AssembleBufferList(sendList);
+
+    for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
+
+            /* we are doing block transfers, so we need to pad everything to a block size */
+        paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
+                       (~(g_BlockSizes[mbox] - 1));
+
+            /* send each buffer synchronously */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              g_MailboxAddrs[mbox],
+                              sendList[i].pBuffer,
+                              paddedLength,
+                              request,
+                              NULL);
+        if (status != A_OK) {
+            break;
+        }
+        totalBytes += sendList[i].length;
+        totalwPadding += paddedLength;
+    }
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
+
+    return status;
+}
+
+/* poll the mailbox credit counter until we get a credit or timeout */
+static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
+{
+    A_STATUS status = A_OK;
+    int      timeout = TEST_CREDITS_RECV_TIMEOUT;
+    A_UINT8  credits = 0;
+    A_UINT32 address;
+
+    while (TRUE) {
+
+            /* Read the counter register to get credits, this auto-decrements  */
+        address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
+        status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
+                              HIF_RD_SYNC_BYTE_FIX, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
+            status = A_ERROR;
+            break;
+        }
+
+        if (credits) {
+            break;
+        }
+
+        timeout--;
+
+        if (timeout <= 0) {
+              AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
+            status = A_ERROR;
+            break;
+        }
+
+         /* delay a little, target may not be ready */
+         msleep(1000);
+
+    }
+
+    if (status == A_OK) {
+        *pCredits = credits;
+    }
+
+    return status;
+}
+
+
+/* wait for the buffers to come back */
+static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS         status = A_OK;
+    A_UINT32         request = HIF_RD_SYNC_BLOCK_INC;
+    BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
+    int              curBuffer;
+    int              credits;
+    int              i;
+    int              totalBytes = 0;
+    int              paddedLength;
+    int              totalwPadding = 0;
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
+
+        /* zero the buffers */
+    InitBuffers(FILL_ZERO);
+
+        /* assemble the order in which we should receive */
+    AssembleBufferList(recvList);
+
+    curBuffer = 0;
+
+    while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
+
+            /* get number of buffers that have been completed, this blocks
+             * until we get at least 1 credit or it times out */
+        status = GetCredits(pDev, mbox, &credits);
+
+        if (status != A_OK) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
+
+            /* get all the buffers that are sitting on the queue */
+        for (i = 0; i < credits; i++) {
+            AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
+                /* recv the current buffer synchronously, the buffers should come back in
+                 * order... with padding applied by the target */
+            paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
+                       (~(g_BlockSizes[mbox] - 1));
+
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  g_MailboxAddrs[mbox],
+                                  recvList[curBuffer].pBuffer,
+                                  paddedLength,
+                                  request,
+                                  NULL);
+            if (status != A_OK) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
+                        recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
+                break;
+            }
+
+            totalwPadding += paddedLength;
+            totalBytes += recvList[curBuffer].length;
+            curBuffer++;
+        }
+
+        if (status != A_OK) {
+            break;
+        }
+            /* go back and get some more */
+        credits = 0;
+    }
+
+    if (totalBytes != TEST_BYTES) {
+        AR_DEBUG_ASSERT(FALSE);
+    }  else {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
+            mbox, totalBytes, totalwPadding));
+    }
+
+    return status;
+
+
+}
+
+static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS status;
+
+    do {
+            /* send out buffers */
+        status = SendBuffers(pDev,mbox);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
+            break;
+        }
+
+            /* go get them, this will block */
+        status =  RecvBuffers(pDev, mbox);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
+            break;
+        }
+
+            /* check the returned data patterns */
+        if (!CheckBuffers()) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
+            status = A_ERROR;
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
+
+    }  while (FALSE);
+
+    return status;
+}
+
+/* here is where the test starts */
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
+{
+    int      i;
+    A_STATUS status;
+    int      credits = 0;
+    A_UINT8  params[4];
+    int      numBufs;
+    int      bufferSize;
+    A_UINT16 temp;
+
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START -  \n"));
+
+    do {
+            /* get the addresses for all 4 mailboxes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+                                    g_MailboxAddrs, sizeof(g_MailboxAddrs));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* get the block sizes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    g_BlockSizes, sizeof(g_BlockSizes));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* note, the HIF layer usually reports mbox 0 to have a block size of
+             * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
+             * the same. */
+        g_BlockSizes[0] = g_BlockSizes[1];
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
+
+        if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
+            AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
+                g_BlockSizes[1], BUFFER_BLOCK_PAD));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
+
+            /* the target lets us know it is ready by giving us 1 credit on
+             * mailbox 0 */
+        status = GetCredits(pDev, 0, &credits);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
+
+            /* read the first 4 scratch registers */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS,
+                              params,
+                              4,
+                              HIF_RD_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
+            break;
+        }
+
+        numBufs = params[0];
+        bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
+            ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
+            numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
+
+        if ((numBufs * bufferSize) < TOTAL_BYTES) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
+                TOTAL_BYTES, (numBufs*bufferSize)));
+            status = A_ERROR;
+            break;
+        }
+
+        temp = GetEndMarker();
+
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS + 4,
+                              (A_UINT8 *)&temp,
+                              2,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
+
+        temp = (A_UINT16)g_BlockSizes[1];
+            /* convert to a mask */
+        temp = temp - 1;
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS + 6,
+                              (A_UINT8 *)&temp,
+                              2,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
+
+            /* execute the test on each mailbox */
+        for (i = 0; i < AR6K_MAILBOXES; i++) {
+            status = DoOneMboxHWTest(pDev, i);
+            if (status != A_OK) {
+                break;
+            }
+        }
+
+    } while (FALSE);
+
+    if (status == A_OK) {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! -  \n"));
+    } else {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! -  \n"));
+    }
+        /* don't let HTC_Start continue, the target is actually not running any HTC code */
+    return A_ERROR;
+}
+#endif
+
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.h
new file mode 100644
index 0000000..301ab34
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k.h
@@ -0,0 +1,191 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6K_H_
+#define AR6K_H_
+
+#define AR6K_MAILBOXES 4
+
+/* HTC runs over mailbox 0 */
+#define HTC_MAILBOX          0
+
+#define AR6K_TARGET_DEBUG_INTR_MASK     0x01
+
+#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK |   \
+                            INT_STATUS_ENABLE_CPU_MASK   |   \
+                            INT_STATUS_ENABLE_COUNTER_MASK)
+
+//#define MBOXHW_UNIT_TEST 1
+
+#include "athstartpack.h"
+typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS {
+    A_UINT8                      host_int_status;
+    A_UINT8                      cpu_int_status;
+    A_UINT8                      error_int_status;
+    A_UINT8                      counter_int_status;
+    A_UINT8                      mbox_frame;
+    A_UINT8                      rx_lookahead_valid;
+    A_UINT8                      hole[2];
+    A_UINT32                     rx_lookahead[2];
+} POSTPACK AR6K_IRQ_PROC_REGISTERS;
+
+#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS)
+
+
+
+typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS {
+    A_UINT8                      int_status_enable;
+    A_UINT8                      cpu_int_status_enable;
+    A_UINT8                      error_status_enable;
+    A_UINT8                      counter_int_status_enable;
+} POSTPACK AR6K_IRQ_ENABLE_REGISTERS;
+
+#include "athendpack.h"
+
+#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS)
+
+#define AR6K_REG_IO_BUFFER_SIZE     32
+#define AR6K_MAX_REG_IO_BUFFERS     8
+
+/* buffers for ASYNC I/O */
+typedef struct AR6K_ASYNC_REG_IO_BUFFER {
+    HTC_PACKET    HtcPacket;   /* we use an HTC packet as a wrapper for our async register-based I/O */
+    A_UINT8       Buffer[AR6K_REG_IO_BUFFER_SIZE];
+} AR6K_ASYNC_REG_IO_BUFFER;
+
+typedef struct _AR6K_DEVICE {
+    A_MUTEX_T                   Lock;
+    AR6K_IRQ_PROC_REGISTERS     IrqProcRegisters;
+    AR6K_IRQ_ENABLE_REGISTERS   IrqEnableRegisters;
+    void                        *HIFDevice;
+    A_UINT32                    BlockSize;
+    A_UINT32                    BlockMask;
+    A_UINT32                    MailboxAddress;
+    HIF_PENDING_EVENTS_FUNC     GetPendingEventsFunc;
+    void                        *HTCContext;
+    HTC_PACKET_QUEUE            RegisterIOList;
+    AR6K_ASYNC_REG_IO_BUFFER    RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS];
+    void                        (*TargetFailureCallback)(void *Context);
+    A_STATUS                    (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+    HIF_DEVICE_IRQ_PROCESSING_MODE  HifIRQProcessingMode;
+    HIF_MASK_UNMASK_RECV_EVENT      HifMaskUmaskRecvEvent;
+} AR6K_DEVICE;
+
+#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY)
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev);
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+                            A_UINT32    *pLookAhead,
+                            int          TimeoutMS);
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status);
+A_STATUS DevDsrHandler(void *context);
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context);
+void     DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
+                          AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs);
+
+#define DEV_STOP_RECV_ASYNC TRUE
+#define DEV_STOP_RECV_SYNC  FALSE
+#define DEV_ENABLE_RECV_ASYNC TRUE
+#define DEV_ENABLE_RECV_SYNC  FALSE
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+
+static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) {
+    A_UINT32 paddedLength;
+    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+    A_STATUS status;
+
+       /* adjust the length to be a multiple of block size if appropriate */
+    paddedLength = (SendLength + (pDev->BlockMask)) &
+                    (~(pDev->BlockMask));
+#if 0 // BufferLength may not be set in , fix this...
+    if (paddedLength > pPacket->BufferLength) {
+        AR_DEBUG_ASSERT(FALSE);
+        if (pPacket->Completion != NULL) {
+            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+        }
+        return A_EINVAL;
+    }
+#endif
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+                paddedLength,
+                pDev->MailboxAddress,
+                sync ? "SYNC" : "ASYNC"));
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          pDev->MailboxAddress,
+                          pPacket->pBuffer,
+                          paddedLength,     /* the padded length */
+                          sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC,
+                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
+
+    if (sync) {
+        pPacket->Status = status;
+    }
+
+    return status;
+}
+
+static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) {
+    A_UINT32 paddedLength;
+    A_STATUS status;
+    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+
+        /* adjust the length to be a multiple of block size if appropriate */
+    paddedLength = (RecvLength + (pDev->BlockMask)) &
+                    (~(pDev->BlockMask));
+    if (paddedLength > pPacket->BufferLength) {
+        AR_DEBUG_ASSERT(FALSE);
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n",
+                    paddedLength,RecvLength,pPacket->BufferLength));
+        if (pPacket->Completion != NULL) {
+            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+        }
+        return A_EINVAL;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+                paddedLength,
+                pDev->MailboxAddress,
+                sync ? "SYNC" : "ASYNC"));
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          pDev->MailboxAddress,
+                          pPacket->pBuffer,
+                          paddedLength,
+                          sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC,
+                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
+
+    if (sync) {
+        pPacket->Status = status;
+    }
+
+    return status;
+}
+
+#ifdef MBOXHW_UNIT_TEST
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev);
+#endif
+
+#endif /*AR6K_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k_events.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k_events.c
new file mode 100644
index 0000000..91b29af
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/ar6k_events.c
@@ -0,0 +1,638 @@
+/*
+ * AR6K Driver layer event handling (i.e. interrupts, message polling)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket);
+extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev);
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev);
+
+#define DELAY_PER_INTERVAL_MS 10  /* 10 MS delay per polling interval */
+
+/* completion routine for ALL HIF layer async I/O */
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status)
+{
+    HTC_PACKET *pPacket = (HTC_PACKET *)context;
+
+    COMPLETE_HTC_PACKET(pPacket,status);
+
+    return A_OK;
+}
+
+/* mailbox recv message polling */
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+                            A_UINT32    *pLookAhead,
+                            int          TimeoutMS)
+{
+    A_STATUS status = A_OK;
+    int      timeout = TimeoutMS/DELAY_PER_INTERVAL_MS;
+
+    AR_DEBUG_ASSERT(timeout > 0);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n"));
+
+    while (TRUE) {
+
+        if (pDev->GetPendingEventsFunc != NULL)
+		{
+
+            HIF_PENDING_EVENTS_INFO events;
+
+            /* the HIF layer uses a special mechanism to get events, do this
+             * synchronously */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                            &events,
+                                            NULL);
+            if (A_FAILED(status))
+			{
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n"));
+				break;
+            }
+
+            if (events.Events & HIF_RECV_MSG_AVAIL)
+			{
+                    /*  there is a message available, the lookahead should be valid now */
+                *pLookAhead = events.LookAhead;
+
+                break;
+            }
+        }
+		else
+		{
+
+                /* this is the standard HIF way.... */
+                /* load the register table */
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  HOST_INT_STATUS_ADDRESS,
+                                  (A_UINT8 *)&pDev->IrqProcRegisters,
+                                  AR6K_IRQ_PROC_REGS_SIZE,
+                                  HIF_RD_SYNC_BYTE_INC,
+                                  NULL);
+
+            if (A_FAILED(status))
+			{
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n"));
+                break;
+            }
+
+                /* check for MBOX data and valid lookahead */
+            if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX))
+			{
+                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX))
+				{
+                    /* mailbox has a message and the look ahead is valid */
+                    *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+                    break;
+                }
+            }
+
+        }
+
+        timeout--;
+
+        if (timeout <= 0)
+		{
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n"));
+            status = A_ERROR;
+
+                /* check if the target asserted */
+            if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+                    /* target signaled an assert, process this pending interrupt
+                     * this will call the target failure handler */
+                DevServiceDebugInterrupt(pDev);
+            }
+
+            break;
+        }
+
+            /* delay a little  */
+         msleep(DELAY_PER_INTERVAL_MS);
+         AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("  Retry Mbox Poll : %d \n",timeout));
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n"));
+
+    return status;
+}
+
+static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+    A_UINT8  cpu_int_status;
+    A_UINT8  regBuffer[4];
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n"));
+    cpu_int_status = pDev->IrqProcRegisters.cpu_int_status &
+                     pDev->IrqEnableRegisters.cpu_int_status_enable;
+    AR_DEBUG_ASSERT(cpu_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
+                    cpu_int_status));
+
+        /* Clear the interrupt */
+    pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */
+
+        /* set up the register transfer buffer to hit the register 4 times , this is done
+         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+         * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+        /* set W1C value to clear the interrupt, this hits the register first */
+    regBuffer[0] = cpu_int_status;
+        /* the remaining 4 values are set to zero which have no-effect  */
+    regBuffer[1] = 0;
+    regBuffer[2] = 0;
+    regBuffer[3] = 0;
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          CPU_INT_STATUS_ADDRESS,
+                          regBuffer,
+                          4,
+                          HIF_WR_SYNC_BYTE_FIX,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+
+static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+    A_UINT8  error_int_status;
+    A_UINT8  regBuffer[4];
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n"));
+    error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F;
+    AR_DEBUG_ASSERT(error_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
+                    error_int_status));
+
+    if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) {
+        /* Wakeup */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n"));
+    }
+
+    if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) {
+        /* Rx Underflow */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n"));
+    }
+
+    if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) {
+        /* Tx Overflow */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n"));
+    }
+
+        /* Clear the interrupt */
+    pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */
+
+        /* set up the register transfer buffer to hit the register 4 times , this is done
+         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+         * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+        /* set W1C value to clear the interrupt, this hits the register first */
+    regBuffer[0] = error_int_status;
+        /* the remaining 4 values are set to zero which have no-effect  */
+    regBuffer[1] = 0;
+    regBuffer[2] = 0;
+    regBuffer[3] = 0;
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          ERROR_INT_STATUS_ADDRESS,
+                          regBuffer,
+                          4,
+                          HIF_WR_SYNC_BYTE_FIX,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev)
+{
+    A_UINT32 dummy;
+    A_STATUS status;
+
+    /* Send a target failure event to the application */
+    AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n"));
+
+    if (pDev->TargetFailureCallback != NULL) {
+        pDev->TargetFailureCallback(pDev->HTCContext);
+    }
+
+    /* clear the interrupt , the debug error interrupt is
+     * counter 0 */
+        /* read counter to clear interrupt */
+    status = HIFReadWrite(pDev->HIFDevice,
+                          COUNT_DEC_ADDRESS,
+                          (A_UINT8 *)&dummy,
+                          4,
+                          HIF_RD_SYNC_BYTE_INC,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev)
+{
+    A_UINT8 counter_int_status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n"));
+
+    counter_int_status = pDev->IrqProcRegisters.counter_int_status &
+                         pDev->IrqEnableRegisters.counter_int_status_enable;
+
+    AR_DEBUG_ASSERT(counter_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
+                    counter_int_status));
+
+    /* Check if the debug interrupt is pending */
+    if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+        return DevServiceDebugInterrupt(pDev);
+    }
+
+    return A_OK;
+}
+
+/* callback when our fetch to get interrupt status registers completes */
+static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+    A_UINT32    lookAhead = 0;
+    A_BOOL      otherInts = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    do {
+
+        if (A_FAILED(pPacket->Status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    (" GetEvents I/O request failed, status:%d \n", pPacket->Status));
+            /* bail out, don't unmask HIF interrupt */
+            break;
+        }
+
+        if (pDev->GetPendingEventsFunc != NULL) {
+                /* the HIF layer collected the information for us */
+            HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer;
+            if (pEvents->Events & HIF_RECV_MSG_AVAIL) {
+                lookAhead = pEvents->LookAhead;
+                if (0 == lookAhead) {
+                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n"));
+                }
+            }
+            if (pEvents->Events & HIF_OTHER_EVENTS) {
+                otherInts = TRUE;
+            }
+        } else {
+                /* standard interrupt table handling.... */
+            AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer;
+            A_UINT8                 host_int_status;
+
+            host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable;
+
+            if (host_int_status & (1 << HTC_MAILBOX)) {
+                host_int_status &= ~(1 << HTC_MAILBOX);
+                if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+                        /* mailbox has a message and the look ahead is valid */
+                    lookAhead = pReg->rx_lookahead[HTC_MAILBOX];
+                    if (0 == lookAhead) {
+                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n"));
+                    }
+                }
+            }
+
+            if (host_int_status) {
+                    /* there are other interrupts to handle */
+                otherInts = TRUE;
+            }
+        }
+
+        if (otherInts || (lookAhead == 0)) {
+            /* if there are other interrupts to process, we cannot do this in the async handler so
+             * ack the interrupt which will cause our sync handler to run again
+             * if however there are no more messages, we can now ack the interrupt  */
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n",
+                otherInts, lookAhead));
+            HIFAckInterrupt(pDev->HIFDevice);
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n",
+                    lookAhead));
+                /* lookahead is non-zero and there are no other interrupts to service,
+                 * go get the next message */
+            pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL);
+        }
+
+    } while (FALSE);
+
+        /* free this IO packet */
+    AR6KFreeIOPacket(pDev,pPacket);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n"));
+}
+
+/* called by the HTC layer when it wants us to check if the device has any more pending
+ * recv messages, this starts off a series of async requests to read interrupt registers  */
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context)
+{
+    AR6K_DEVICE  *pDev = (AR6K_DEVICE *)context;
+    A_STATUS      status = A_OK;
+    HTC_PACKET   *pIOPacket;
+
+    /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can
+     * cause us to switch contexts */
+
+   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+   do {
+
+        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+                /* break the async processing chain right here, no need to continue.
+                 * The DevDsrHandler() will handle things in a loop when things are driven
+                 * synchronously  */
+            break;
+        }
+            /* first allocate one of our HTC packets we created for async I/O
+             * we reuse HTC packet definitions so that we can use the completion mechanism
+             * in DevRWCompletionHandler() */
+        pIOPacket = AR6KAllocIOPacket(pDev);
+
+        if (NULL == pIOPacket) {
+                /* there should be only 1 asynchronous request out at a time to read these registers
+                 * so this should actually never happen */
+            status = A_NO_MEMORY;
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* stick in our completion routine when the I/O operation completes */
+        pIOPacket->Completion = DevGetEventAsyncHandler;
+        pIOPacket->pContext = pDev;
+
+        if (pDev->GetPendingEventsFunc) {
+                /* HIF layer has it's own mechanism, pass the IO to it.. */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                                (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer,
+                                                pIOPacket);
+
+        } else {
+                /* standard way, read the interrupt register table asynchronously again */
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  HOST_INT_STATUS_ADDRESS,
+                                  pIOPacket->pBuffer,
+                                  AR6K_IRQ_PROC_REGS_SIZE,
+                                  HIF_RD_ASYNC_BYTE_INC,
+                                  pIOPacket);
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n"));
+   } while (FALSE);
+
+   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n"));
+
+   return status;
+}
+
+/* process pending interrupts synchronously */
+static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing)
+{
+    A_STATUS    status = A_OK;
+    A_UINT8     host_int_status = 0;
+    A_UINT32    lookAhead = 0;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    /*** NOTE: the HIF implementation guarantees that the context of this call allows
+     *         us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that
+     *         can block or switch thread/task ontexts.
+     *         This is a fully schedulable context.
+     * */
+    do {
+
+        if (pDev->GetPendingEventsFunc != NULL) {
+            HIF_PENDING_EVENTS_INFO events;
+
+                /* the HIF layer uses a special mechanism to get events
+                 * get this synchronously  */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                                &events,
+                                                NULL);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+            if (events.Events & HIF_RECV_MSG_AVAIL) {
+                lookAhead = events.LookAhead;
+                if (0 == lookAhead) {
+                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n"));
+                }
+            }
+
+            if (!(events.Events & HIF_OTHER_EVENTS) ||
+                !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) {
+                    /* no need to read the register table, no other interesting interrupts.
+                     * Some interfaces (like SPI) can shadow interrupt sources without
+                     * requiring the host to do a full table read */
+                break;
+            }
+
+            /* otherwise fall through and read the register table */
+        }
+
+        /*
+         * Read the first 28 bytes of the HTC register table. This will yield us
+         * the value of different int status registers and the lookahead
+         * registers.
+         *    length = sizeof(int_status) + sizeof(cpu_int_status) +
+         *             sizeof(error_int_status) + sizeof(counter_int_status) +
+         *             sizeof(mbox_frame) + sizeof(rx_lookahead_valid) +
+         *             sizeof(hole) +  sizeof(rx_lookahead) +
+         *             sizeof(int_status_enable) + sizeof(cpu_int_status_enable) +
+         *             sizeof(error_status_enable) +
+         *             sizeof(counter_int_status_enable);
+         *
+        */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              HOST_INT_STATUS_ADDRESS,
+                              (A_UINT8 *)&pDev->IrqProcRegisters,
+                              AR6K_IRQ_PROC_REGS_SIZE,
+                              HIF_RD_SYNC_BYTE_INC,
+                              NULL);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) {
+            DevDumpRegisters(&pDev->IrqProcRegisters,
+                             &pDev->IrqEnableRegisters);
+        }
+
+            /* Update only those registers that are enabled */
+        host_int_status = pDev->IrqProcRegisters.host_int_status &
+                          pDev->IrqEnableRegisters.int_status_enable;
+
+        if (NULL == pDev->GetPendingEventsFunc) {
+                /* only look at mailbox status if the HIF layer did not provide this function,
+                 * on some HIF interfaces reading the RX lookahead is not valid to do */
+            if (host_int_status & (1 << HTC_MAILBOX)) {
+                    /* mask out pending mailbox value, we use "lookAhead" as the real flag for
+                     * mailbox processing below */
+                host_int_status &= ~(1 << HTC_MAILBOX);
+                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+                        /* mailbox has a message and the look ahead is valid */
+                    lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+                    if (0 == lookAhead) {
+                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n"));
+                    }
+                }
+            }
+        } else {
+                /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/
+            host_int_status &= ~(1 << HTC_MAILBOX);
+        }
+
+    } while (FALSE);
+
+
+    do {
+
+            /* did the interrupt status fetches succeed? */
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if ((0 == host_int_status) && (0 == lookAhead)) {
+                /* nothing to process, the caller can use this to break out of a loop */
+            *pDone = TRUE;
+            break;
+        }
+
+        if (lookAhead != 0) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead));
+                /* Mailbox Interrupt, the HTC layer may issue async requests to empty the
+                 * mailbox...
+                 * When emptying the recv mailbox we use the async handler above called from the
+                 * completion routine of the callers read request. This can improve performance
+                 * by reducing context switching when we rapidly pull packets */
+            status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing);
+            if (A_FAILED(status)) {
+                break;
+            }
+        }
+
+            /* now handle the rest of them */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                            (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n",
+                            host_int_status));
+
+        if (HOST_INT_STATUS_CPU_GET(host_int_status)) {
+                /* CPU Interrupt */
+            status = DevServiceCPUInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+        if (HOST_INT_STATUS_ERROR_GET(host_int_status)) {
+                /* Error Interrupt */
+            status = DevServiceErrorInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+        if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) {
+                /* Counter Interrupt */
+            status = DevServiceCounterInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n",
+                *pDone, *pASyncProcessing, status));
+
+    return status;
+}
+
+
+/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/
+A_STATUS DevDsrHandler(void *context)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
+    A_STATUS    status = A_OK;
+    A_BOOL      done = FALSE;
+    A_BOOL      asyncProc = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+
+    while (!done) {
+        status = ProcessPendingIRQs(pDev, &done, &asyncProc);
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+            /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */
+            asyncProc = FALSE;
+            /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers.
+             * this has a nice side effect of blocking us until all async read requests are completed.
+             * This behavior is required on some HIF implementations that do not allow ASYNC
+             * processing in interrupt handlers (like Windows CE) */
+        }
+
+        if (asyncProc) {
+                /* the function performed some async I/O for performance, we
+                   need to exit the ISR immediately, the check below will prevent the interrupt from being
+                   Ack'd while we handle it asynchronously */
+            break;
+        }
+
+    }
+
+    if (A_SUCCESS(status) && !asyncProc) {
+            /* Ack the interrupt only if :
+             *  1. we did not get any errors in processing interrupts
+             *  2. there are no outstanding async processing requests */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n"));
+        HIFAckInterrupt(pDev->HIFDevice);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n"));
+    return A_OK;
+}
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc.c
new file mode 100644
index 0000000..d52ed94
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc.c
@@ -0,0 +1,508 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+
+static HTC_INIT_INFO  HTCInitInfo = {NULL,NULL,NULL};
+static A_BOOL         HTCInitialized = FALSE;
+
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle);
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status);
+static void HTCReportFailure(void *Context);
+
+/* Initializes the HTC layer */
+A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo)
+{
+    HTC_CALLBACKS htcCallbacks;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n"));
+    if (HTCInitialized) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+        return A_OK;
+    }
+
+    A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO));
+
+    A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS));
+
+        /* setup HIF layer callbacks */
+    htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler;
+    htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler;
+        /* the device layer handles these */
+    htcCallbacks.rwCompletionHandler = DevRWCompletionHandler;
+    htcCallbacks.dsrHandler = DevDsrHandler;
+    HIFInit(&htcCallbacks);
+    HTCInitialized = TRUE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+    return A_OK;
+}
+
+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList)
+{
+    LOCK_HTC(target);
+    HTC_PACKET_ENQUEUE(pList,pPacket);
+    UNLOCK_HTC(target);
+}
+
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target,  HTC_PACKET_QUEUE *pList)
+{
+    HTC_PACKET *pPacket;
+
+    LOCK_HTC(target);
+    pPacket = HTC_PACKET_DEQUEUE(pList);
+    UNLOCK_HTC(target);
+
+    return pPacket;
+}
+
+/* cleanup the HTC instance */
+static void HTCCleanup(HTC_TARGET *target)
+{
+    if (A_IS_MUTEX_VALID(&target->HTCLock)) {
+        A_MUTEX_DELETE(&target->HTCLock);
+    }
+
+    if (A_IS_MUTEX_VALID(&target->HTCRxLock)) {
+        A_MUTEX_DELETE(&target->HTCRxLock);
+    }
+
+    if (A_IS_MUTEX_VALID(&target->HTCTxLock)) {
+        A_MUTEX_DELETE(&target->HTCTxLock);
+    }
+        /* free our instance */
+    A_FREE(target);
+}
+
+/* registered target arrival callback from the HIF layer */
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle)
+{
+    HTC_TARGET              *target = NULL;
+    A_STATUS                 status;
+    int                      i;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n"));
+
+    do {
+
+            /* allocate target memory */
+        if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n"));
+            status = A_ERROR;
+            break;
+        }
+
+        A_MEMZERO(target, sizeof(HTC_TARGET));
+        A_MUTEX_INIT(&target->HTCLock);
+        A_MUTEX_INIT(&target->HTCRxLock);
+        A_MUTEX_INIT(&target->HTCTxLock);
+        INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList);
+        INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList);
+
+            /* give device layer the hif device handle */
+        target->Device.HIFDevice = hif_handle;
+            /* give the device layer our context (for event processing)
+             * the device layer will register it's own context with HIF
+             * so we need to set this so we can fetch it in the target remove handler */
+        target->Device.HTCContext = target;
+            /* set device layer target failure callback */
+        target->Device.TargetFailureCallback = HTCReportFailure;
+            /* set device layer recv message pending callback */
+        target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler;
+        target->EpWaitingForBuffers = ENDPOINT_MAX;
+
+            /* setup device layer */
+        status = DevSetup(&target->Device);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* carve up buffers/packets for control messages */
+        for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) {
+            HTC_PACKET *pControlPacket;
+            pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+            SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket,
+                                          target,
+                                          target->HTCControlBuffers[i].Buffer,
+                                          HTC_CONTROL_BUFFER_SIZE,
+                                          ENDPOINT_0);
+            HTC_FREE_CONTROL_RX(target,pControlPacket);
+        }
+
+        for (;i < NUM_CONTROL_BUFFERS;i++) {
+             HTC_PACKET *pControlPacket;
+             pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+             INIT_HTC_PACKET_INFO(pControlPacket,
+                                  target->HTCControlBuffers[i].Buffer,
+                                  HTC_CONTROL_BUFFER_SIZE);
+             HTC_FREE_CONTROL_TX(target,pControlPacket);
+        }
+
+    } while (FALSE);
+
+    if (A_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n"));
+            /* announce ourselves */
+        HTCInitInfo.AddInstance((HTC_HANDLE)target);
+    } else {
+        if (target != NULL) {
+            HTCCleanup(target);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n"));
+
+    return status;
+}
+
+/* registered removal callback from the HIF layer */
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status)
+{
+    HTC_TARGET *target;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle));
+
+    if (NULL == handle) {
+            /* this could be NULL in the event that target initialization failed */
+        return A_OK;
+    }
+
+    target = ((AR6K_DEVICE *)handle)->HTCContext;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("   removing target:0x%X instance:0x%X ... \n",
+            (A_UINT32)target, (A_UINT32)target->pInstanceContext));
+
+    if (target->pInstanceContext != NULL) {
+            /* let upper layer know, it needs to call HTCStop() */
+        HTCInitInfo.DeleteInstance(target->pInstanceContext);
+    }
+
+    HIFShutDownDevice(target->Device.HIFDevice);
+
+    HTCCleanup(target);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n"));
+    return A_OK;
+}
+
+/* get the low level HIF device for the caller , the caller may wish to do low level
+ * HIF requests */
+void *HTCGetHifDevice(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    return target->Device.HIFDevice;
+}
+
+/* set the instance block for this HTC handle, so that on removal, the blob can be
+ * returned to the caller */
+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance)
+{
+    HTC_TARGET  *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+    target->pInstanceContext = Instance;
+}
+
+/* wait for the target to arrive (sends HTC Ready message)
+ * this operation is fully synchronous and the message is polled for */
+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET              *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_STATUS                 status;
+    HTC_PACKET              *pPacket = NULL;
+    HTC_READY_MSG           *pRdyMsg;
+    HTC_SERVICE_CONNECT_REQ  connect;
+    HTC_SERVICE_CONNECT_RESP resp;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target));
+
+    do {
+
+#ifdef MBOXHW_UNIT_TEST
+
+        status = DoMboxHWTest(&target->Device);
+
+        if (status != A_OK) {
+            break;
+        }
+
+#endif
+
+            /* we should be getting 1 control message that the target is ready */
+        status = HTCWaitforControlMessage(target, &pPacket);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n"));
+            break;
+        }
+
+            /* we controlled the buffer creation so it has to be properly aligned */
+        pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer;
+
+        if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) ||
+            (pPacket->ActualLength < sizeof(HTC_READY_MSG))) {
+                /* this message is not valid */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) {
+              /* this message is not valid */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        target->TargetCredits = pRdyMsg->CreditCount;
+        target->TargetCreditSize = pRdyMsg->CreditSize;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n",
+                target->TargetCredits, target->TargetCreditSize));
+
+            /* setup our pseudo HTC control endpoint connection */
+        A_MEMZERO(&connect,sizeof(connect));
+        A_MEMZERO(&resp,sizeof(resp));
+        connect.EpCallbacks.pContext = target;
+        connect.EpCallbacks.EpTxComplete = HTCControlTxComplete;
+        connect.EpCallbacks.EpRecv = HTCControlRecv;
+        connect.EpCallbacks.EpRecvRefill = NULL;  /* not needed */
+        connect.EpCallbacks.EpSendFull = NULL;    /* not needed */
+        connect.EpCallbacks.EpSendAvail = NULL;   /* not needed */
+        connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS;
+        connect.ServiceID = HTC_CTRL_RSVD_SVC;
+
+            /* connect fake service */
+        status = HTCConnectService((HTC_HANDLE)target,
+                                   &connect,
+                                   &resp);
+
+        if (!A_FAILED(status)) {
+            break;
+        }
+
+    } while (FALSE);
+
+    if (pPacket != NULL) {
+        HTC_FREE_CONTROL_RX(target,pPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n"));
+
+    return status;
+}
+
+
+
+/* Start HTC, enable interrupts and let the target know host has finished setup */
+A_STATUS HTCStart(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_PACKET *pPacket;
+    A_STATUS   status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n"));
+
+        /* now that we are starting, push control receive buffers into the
+         * HTC control endpoint */
+
+    while (1) {
+        pPacket = HTC_ALLOC_CONTROL_RX(target);
+        if (NULL == pPacket) {
+            break;
+        }
+        HTCAddReceivePkt((HTC_HANDLE)target,pPacket);
+    }
+
+    do {
+
+        AR_DEBUG_ASSERT(target->InitCredits != NULL);
+        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL);
+        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL);
+
+            /* call init credits callback to do the distribution ,
+             * NOTE: the first entry in the distribution list is ENDPOINT_0, so
+             * we pass the start of the list after this one. */
+        target->InitCredits(target->pCredDistContext,
+                            target->EpCreditDistributionListHead->pNext,
+                            target->TargetCredits);
+
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) {
+            DumpCreditDistStates(target);
+        }
+
+            /* the caller is done connecting to services, so we can indicate to the
+            * target that the setup phase is complete */
+        status = HTCSendSetupComplete(target);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* unmask interrupts */
+        status = DevUnmaskInterrupts(&target->Device);
+
+        if (A_FAILED(status)) {
+            HTCStop(target);
+        }
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n"));
+    return status;
+}
+
+
+/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */
+void HTCStop(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n"));
+
+        /* mark that we are shutting down .. */
+    target->HTCStateFlags |= HTC_STATE_STOPPING;
+
+        /* Masking interrupts is a synchronous operation, when this function returns
+         * all pending HIF I/O has completed, we can safely flush the queues */
+    DevMaskInterrupts(&target->Device);
+
+        /* flush all send packets */
+    HTCFlushSendPkts(target);
+        /* flush all recv buffers */
+    HTCFlushRecvBuffers(target);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n"));
+}
+
+/* undo what was done in HTCInit() */
+void HTCShutDown(void)
+{
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n"));
+    HTCInitialized = FALSE;
+        /* undo HTCInit */
+    HIFShutDownDevice(NULL);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n"));
+}
+
+void HTCDumpCreditStates(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+    LOCK_HTC_TX(target);
+
+    DumpCreditDistStates(target);
+
+    UNLOCK_HTC_TX(target);
+}
+
+/* report a target failure from the device, this is a callback from the device layer
+ * which uses a mechanism to report errors from the target (i.e. special interrupts) */
+static void HTCReportFailure(void *Context)
+{
+    HTC_TARGET *target = (HTC_TARGET *)Context;
+
+    target->TargetFailure = TRUE;
+
+    if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) {
+            /* let upper layer know, it needs to call HTCStop() */
+        HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR);
+    }
+}
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription)
+{
+    A_CHAR stream[60];
+    A_UINT32 i;
+    A_UINT16 offset, count;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription));
+
+    count = 0;
+    offset = 0;
+    for(i = 0; i < length; i++) {
+        sprintf(stream + offset, "%2.2X ", buffer[i]);
+        count ++;
+        offset += 3;
+
+        if(count == 16) {
+            count = 0;
+            offset = 0;
+            AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+            A_MEMZERO(stream, 60);
+        }
+    }
+
+    if(offset != 0) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n"));
+}
+
+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
+                                HTC_ENDPOINT_ID          Endpoint,
+                                HTC_ENDPOINT_STAT_ACTION Action,
+                                HTC_ENDPOINT_STATS       *pStats)
+{
+
+#ifdef HTC_EP_STAT_PROFILING
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_BOOL     clearStats = FALSE;
+    A_BOOL     sample = FALSE;
+
+    switch (Action) {
+        case HTC_EP_STAT_SAMPLE :
+            sample = TRUE;
+            break;
+        case HTC_EP_STAT_SAMPLE_AND_CLEAR :
+            sample = TRUE;
+            clearStats = TRUE;
+            break;
+        case HTC_EP_STAT_CLEAR :
+            clearStats = TRUE;
+            break;
+        default:
+            break;
+    }
+
+    A_ASSERT(Endpoint < ENDPOINT_MAX);
+
+        /* lock out TX and RX while we sample and/or clear */
+    LOCK_HTC_TX(target);
+    LOCK_HTC_RX(target);
+
+    if (sample) {
+        A_ASSERT(pStats != NULL);
+            /* return the stats to the caller */
+        A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+    }
+
+    if (clearStats) {
+            /* reset stats */
+        A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+    }
+
+    UNLOCK_HTC_RX(target);
+    UNLOCK_HTC_TX(target);
+
+    return TRUE;
+#else
+    return FALSE;
+#endif
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_debug.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_debug.h
new file mode 100644
index 0000000..08080be
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_debug.h
@@ -0,0 +1,65 @@
+#ifndef HTC_DEBUG_H_
+#define HTC_DEBUG_H_
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/* ------- Debug related stuff ------- */
+enum {
+    ATH_DEBUG_SEND = 0x0001,
+    ATH_DEBUG_RECV = 0x0002,
+    ATH_DEBUG_SYNC = 0x0004,
+    ATH_DEBUG_DUMP = 0x0008,
+    ATH_DEBUG_IRQ  = 0x0010,
+    ATH_DEBUG_TRC  = 0x0020,
+    ATH_DEBUG_WARN = 0x0040,
+    ATH_DEBUG_ERR  = 0x0080,
+    ATH_DEBUG_ANY  = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
+    if (debughtc & ATH_DEBUG_DUMP) {             \
+        DebugDumpBytes(buffer, length,desc);               \
+    }                                            \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do {        \
+    if (debughtc & (flags)) {                    \
+        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
+    }                                            \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do {               \
+    if (!(test)) {                               \
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
+    }                                            \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#endif
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+#endif /*HTC_DEBUG_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_internal.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_internal.h
new file mode 100644
index 0000000..ebb8ac1
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_internal.h
@@ -0,0 +1,168 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_INTERNAL_H_
+#define _HTC_INTERNAL_H_
+
+/* for debugging, uncomment this to capture the last frame header, on frame header
+ * processing errors, the last frame header is dump for comparison */
+//#define HTC_CAPTURE_LAST_FRAME
+
+//#define HTC_EP_STAT_PROFILING
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc.h"
+#include "htc_api.h"
+#include "bmi_msg.h"
+#include "hif.h"
+#include "ar6k.h"
+
+/* HTC operational parameters */
+#define HTC_TARGET_RESPONSE_TIMEOUT        2000 /* in ms */
+#define HTC_TARGET_DEBUG_INTR_MASK         0x01
+#define HTC_TARGET_CREDIT_INTR_MASK        0xF0
+
+typedef struct _HTC_ENDPOINT {
+    HTC_SERVICE_ID              ServiceID;      /* service ID this endpoint is bound to
+                                                   non-zero value means this endpoint is in use */
+    HTC_PACKET_QUEUE            TxQueue;        /* HTC frame buffer TX queue */
+    HTC_PACKET_QUEUE            RxBuffers;      /* HTC frame buffer RX list */
+    HTC_ENDPOINT_CREDIT_DIST    CreditDist;     /* credit distribution structure (exposed to driver layer) */
+    HTC_EP_CALLBACKS            EpCallBacks;    /* callbacks associated with this endpoint */
+    int                         MaxTxQueueDepth;   /* max depth of the TX queue before we need to
+                                                      call driver's full handler */
+    int                         CurrentTxQueueDepth; /* current TX queue depth */
+    int                         MaxMsgLength;        /* max length of endpoint message */
+#ifdef HTC_EP_STAT_PROFILING
+    HTC_ENDPOINT_STATS          EndPointStats;  /* endpoint statistics */
+#endif
+} HTC_ENDPOINT;
+
+#ifdef HTC_EP_STAT_PROFILING
+#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count);
+#else
+#define INC_HTC_EP_STAT(p,stat,count)
+#endif
+
+#define HTC_SERVICE_TX_PACKET_TAG  HTC_TX_PACKET_TAG_INTERNAL
+
+#define NUM_CONTROL_BUFFERS     8
+#define NUM_CONTROL_TX_BUFFERS  2
+#define NUM_CONTROL_RX_BUFFERS  (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS)
+
+#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH)
+
+typedef struct HTC_CONTROL_BUFFER {
+    HTC_PACKET    HtcPacket;
+    A_UINT8       Buffer[HTC_CONTROL_BUFFER_SIZE];
+} HTC_CONTROL_BUFFER;
+
+/* our HTC target state */
+typedef struct _HTC_TARGET {
+    HTC_ENDPOINT                EndPoint[ENDPOINT_MAX];
+    HTC_CONTROL_BUFFER          HTCControlBuffers[NUM_CONTROL_BUFFERS];
+    HTC_ENDPOINT_CREDIT_DIST   *EpCreditDistributionListHead;
+    HTC_PACKET_QUEUE            ControlBufferTXFreeList;
+    HTC_PACKET_QUEUE            ControlBufferRXFreeList;
+    HTC_CREDIT_DIST_CALLBACK    DistributeCredits;
+    HTC_CREDIT_INIT_CALLBACK    InitCredits;
+    void                       *pCredDistContext;
+    int                         TargetCredits;
+    int                         TargetCreditSize;
+    A_MUTEX_T                   HTCLock;
+    A_MUTEX_T                   HTCRxLock;
+    A_MUTEX_T                   HTCTxLock;
+    AR6K_DEVICE                 Device;         /* AR6K - specific state */
+    A_UINT32                    HTCStateFlags;
+    HTC_ENDPOINT_ID             EpWaitingForBuffers;
+    A_BOOL                      TargetFailure;
+    void                       *pInstanceContext;
+#define HTC_STATE_WAIT_BUFFERS  (1 << 0)
+#define HTC_STATE_STOPPING      (1 << 1)
+#ifdef HTC_CAPTURE_LAST_FRAME
+    HTC_FRAME_HDR               LastFrameHdr;  /* useful for debugging */
+    A_UINT8                     LastTrailer[256];
+    A_UINT8                     LastTrailerLength;
+#endif
+} HTC_TARGET;
+
+#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING)
+#define LOCK_HTC(t)      A_MUTEX_LOCK(&(t)->HTCLock);
+#define UNLOCK_HTC(t)    A_MUTEX_UNLOCK(&(t)->HTCLock);
+#define LOCK_HTC_RX(t)   A_MUTEX_LOCK(&(t)->HTCRxLock);
+#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock);
+#define LOCK_HTC_TX(t)   A_MUTEX_LOCK(&(t)->HTCTxLock);
+#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock);
+
+#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd))
+#define HTC_RECYCLE_RX_PKT(target,p)                \
+{                                                   \
+    HTC_PACKET_RESET_RX(pPacket);                   \
+    HTCAddReceivePkt((HTC_HANDLE)(target),(p));     \
+}
+
+/* internal HTC functions */
+void        HTCControlTxComplete(void *Context, HTC_PACKET *pPacket);
+void        HTCControlRecv(void *Context, HTC_PACKET *pPacket);
+A_STATUS    HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket);
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList);
+void        HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList);
+A_STATUS    HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags);
+A_STATUS    HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket);
+void        HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket);
+A_STATUS    HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+void        HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint);
+A_STATUS    HTCSendSetupComplete(HTC_TARGET *target);
+void        HTCFlushRecvBuffers(HTC_TARGET *target);
+void        HTCFlushSendPkts(HTC_TARGET *target);
+void        DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist);
+void        DumpCreditDistStates(HTC_TARGET *target);
+void 		DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) {
+    HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList);
+    if (pPacket != NULL) {
+            /* set payload pointer area with some headroom */
+        pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH;
+    }
+    return pPacket;
+}
+
+#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList)
+#define HTC_ALLOC_CONTROL_RX(t)  HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList)
+#define HTC_FREE_CONTROL_RX(t,p) \
+{                                                                \
+    HTC_PACKET_RESET_RX(p);                                      \
+    HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_INTERNAL_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_recv.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_recv.c
new file mode 100644
index 0000000..4be2b08
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_recv.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define HTCIssueRecv(t, p) \
+    DevRecvPacket(&(t)->Device,  \
+                  (p),          \
+                  (p)->ActualLength)
+
+#define DO_RCV_COMPLETION(t,p,e)            \
+{                                           \
+    if ((p)->ActualLength > 0) {            \
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \
+            (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint));  \
+        (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext,      \
+                                (p));                           \
+    } else {                                                    \
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n"));  \
+        HTC_RECYCLE_RX_PKT((t), (p));                           \
+    }                                                           \
+}
+
+#ifdef HTC_EP_STAT_PROFILING
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)            \
+{                                                      \
+    LOCK_HTC_RX((t));                                  \
+    INC_HTC_EP_STAT((ep), RxReceived, 1);              \
+    if ((lookAhead) != 0) {                            \
+        INC_HTC_EP_STAT((ep), RxLookAheads, 1);        \
+    }                                                  \
+    UNLOCK_HTC_RX((t));                                \
+}
+#else
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)
+#endif
+
+static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target,
+                                         A_UINT8    *pBuffer,
+                                         int         Length,
+                                         A_UINT32   *pNextLookAhead,
+                                         HTC_ENDPOINT_ID FromEndpoint)
+{
+    HTC_RECORD_HDR          *pRecord;
+    A_UINT8                 *pRecordBuf;
+    HTC_LOOKAHEAD_REPORT    *pLookAhead;
+    A_UINT8                 *pOrigBuffer;
+    int                     origLength;
+    A_STATUS                status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length));
+
+    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+        AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer");
+    }
+
+    pOrigBuffer = pBuffer;
+    origLength = Length;
+    status = A_OK;
+
+    while (Length > 0) {
+
+        if (Length < sizeof(HTC_RECORD_HDR)) {
+            status = A_EPROTO;
+            break;
+        }
+            /* these are byte aligned structs */
+        pRecord = (HTC_RECORD_HDR *)pBuffer;
+        Length -= sizeof(HTC_RECORD_HDR);
+        pBuffer += sizeof(HTC_RECORD_HDR);
+
+        if (pRecord->Length > Length) {
+                /* no room left in buffer for record */
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" invalid record length: %d (id:%d) buffer has: %d bytes left \n",
+                        pRecord->Length, pRecord->RecordID, Length));
+            status = A_EPROTO;
+            break;
+        }
+            /* start of record follows the header */
+        pRecordBuf = pBuffer;
+
+        switch (pRecord->RecordID) {
+            case HTC_RECORD_CREDITS:
+                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT));
+                HTCProcessCreditRpt(target,
+                                    (HTC_CREDIT_REPORT *)pRecordBuf,
+                                    pRecord->Length / (sizeof(HTC_CREDIT_REPORT)),
+                                    FromEndpoint);
+                break;
+            case HTC_RECORD_LOOKAHEAD:
+                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT));
+                pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf;
+                if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) &&
+                    (pNextLookAhead != NULL)) {
+
+                    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                                (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n",
+                                pLookAhead->PreValid,
+                                pLookAhead->PostValid));
+
+                        /* look ahead bytes are valid, copy them over */
+                    ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0];
+                    ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1];
+                    ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2];
+                    ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3];
+
+                    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+                        DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead");
+                    }
+                }
+                break;
+            default:
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n",
+                        pRecord->RecordID, pRecord->Length));
+                break;
+        }
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* advance buffer past this record for next time around */
+        pBuffer += pRecord->Length;
+        Length -= pRecord->Length;
+    }
+
+    if (A_FAILED(status)) {
+        DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer");
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n"));
+    return status;
+
+}
+
+/* process a received message (i.e. strip off header, process any trailer data)
+ * note : locks must be released when this function is called */
+static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead)
+{
+    A_UINT8   temp;
+    A_UINT8   *pBuf;
+    A_STATUS  status = A_OK;
+    A_UINT16  payloadLen;
+    A_UINT32  lookAhead;
+
+    pBuf = pPacket->pBuffer;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n"));
+
+    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+        AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT");
+    }
+
+    do {
+        /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to
+         * retrieve 16 bit fields */
+        payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen);
+
+        ((A_UINT8 *)&lookAhead)[0] = pBuf[0];
+        ((A_UINT8 *)&lookAhead)[1] = pBuf[1];
+        ((A_UINT8 *)&lookAhead)[2] = pBuf[2];
+        ((A_UINT8 *)&lookAhead)[3] = pBuf[3];
+
+        if (lookAhead != pPacket->HTCReserved) {
+            /* somehow the lookahead that gave us the full read length did not
+             * reflect the actual header in the pending message */
+             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCProcessRecvHeader, lookahead mismatch! \n"));
+             DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead");
+             DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header");
+#ifdef HTC_CAPTURE_LAST_FRAME
+            DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header");
+            if (target->LastTrailerLength != 0) {
+                DebugDumpBytes(target->LastTrailer,
+                               target->LastTrailerLength,
+                               "Last trailer");
+            }
+#endif
+            status = A_EPROTO;
+            break;
+        }
+
+            /* get flags */
+        temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags);
+
+        if (temp & HTC_FLAGS_RECV_TRAILER) {
+            /* this packet has a trailer */
+
+                /* extract the trailer length in control byte 0 */
+            temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]);
+
+            if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n",
+                        payloadLen, temp));
+                status = A_EPROTO;
+                break;
+            }
+
+                /* process trailer data that follows HDR + application payload */
+            status = HTCProcessTrailer(target,
+                                       (pBuf + HTC_HDR_LENGTH + payloadLen - temp),
+                                       temp,
+                                       pNextLookAhead,
+                                       pPacket->Endpoint);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+#ifdef HTC_CAPTURE_LAST_FRAME
+            A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp);
+            target->LastTrailerLength = temp;
+#endif
+                /* trim length by trailer bytes */
+            pPacket->ActualLength -= temp;
+        }
+#ifdef HTC_CAPTURE_LAST_FRAME
+         else {
+            target->LastTrailerLength = 0;
+        }
+#endif
+
+            /* if we get to this point, the packet is good */
+            /* remove header and adjust length */
+        pPacket->pBuffer += HTC_HDR_LENGTH;
+        pPacket->ActualLength -= HTC_HDR_LENGTH;
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+            /* dump the whole packet */
+        DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT");
+    } else {
+#ifdef HTC_CAPTURE_LAST_FRAME
+        A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR));
+#endif
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+            if (pPacket->ActualLength > 0) {
+                AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg");
+            }
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n"));
+    return status;
+}
+
+/* asynchronous completion handler for recv packet fetching, when the device layer
+ * completes a read request, it will call this completion handler */
+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    HTC_ENDPOINT    *pEndpoint;
+    A_UINT32        nextLookAhead = 0;
+    A_STATUS        status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+
+    AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+    pEndpoint = &target->EndPoint[pPacket->Endpoint];
+    pPacket->Completion = NULL;
+
+        /* get completion status */
+    status = pPacket->Status;
+
+    do {
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+            break;
+        }
+            /* process the header for any trailer data */
+        status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+            /* was there a lookahead for the next packet? */
+        if (nextLookAhead != 0) {
+            A_STATUS nextStatus;
+            AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                            ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n",
+                             nextLookAhead));
+                /* we have another packet, get the next packet fetch started (pipelined) before
+                 * we call into the endpoint's callback, this will start another async request */
+            nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL);
+            if (A_EPROTO == nextStatus) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                            ("Next look ahead from recv header was INVALID\n"));
+                DebugDumpBytes((A_UINT8 *)&nextLookAhead,
+                                4,
+                                "BAD lookahead from lookahead report");
+            }
+        } else {
+             AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+            ("HTCRecvCompleteHandler - rechecking for more messages...\n"));
+            /* if we did not get anything on the look-ahead,
+             * call device layer to asynchronously re-check for messages. If we can keep the async
+             * processing going we get better performance.  If there is a pending message we will keep processing
+             * messages asynchronously which should pipeline things nicely */
+            DevCheckPendingRecvMsgsAsync(&target->Device);
+        }
+
+        HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead);
+        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                         ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n",
+                         status));
+            /* recyle this packet */
+         HTC_RECYCLE_RX_PKT(target, pPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n"));
+}
+
+/* synchronously wait for a control message from the target,
+ * This function is used at initialization time ONLY.  At init messages
+ * on ENDPOINT 0 are expected. */
+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket)
+{
+    A_STATUS        status;
+    A_UINT32        lookAhead;
+    HTC_PACKET      *pPacket = NULL;
+    HTC_FRAME_HDR   *pHdr;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n"));
+
+    do  {
+
+        *ppControlPacket = NULL;
+
+            /* call the polling function to see if we have a message */
+        status = DevPollMboxMsgRecv(&target->Device,
+                                    &lookAhead,
+                                    HTC_TARGET_RESPONSE_TIMEOUT);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead));
+
+            /* check the lookahead */
+        pHdr = (HTC_FRAME_HDR *)&lookAhead;
+
+        if (pHdr->EndpointID != ENDPOINT_0) {
+                /* unexpected endpoint number, should be zero */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        if (A_FAILED(status)) {
+                /* bad message */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        pPacket = HTC_ALLOC_CONTROL_RX(target);
+
+        if (pPacket == NULL) {
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_NO_MEMORY;
+            break;
+        }
+
+        pPacket->HTCReserved = lookAhead;
+        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+        if (pPacket->ActualLength > pPacket->BufferLength) {
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+            /* we want synchronous operation */
+        pPacket->Completion = NULL;
+
+            /* get the message from the device, this will block */
+        status = HTCIssueRecv(target, pPacket);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* process receive header */
+        status = HTCProcessRecvHeader(target,pPacket,NULL);
+
+        pPacket->Status = status;
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n",
+                     status));
+            break;
+        }
+
+            /* give the caller this control message packet, they are responsible to free */
+        *ppControlPacket = pPacket;
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        if (pPacket != NULL) {
+                /* cleanup buffer on error */
+            HTC_FREE_CONTROL_RX(target,pPacket);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n"));
+
+    return status;
+}
+
+/* callback when device layer or lookahead report parsing detects a pending message */
+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    A_STATUS         status = A_OK;
+    HTC_PACKET      *pPacket = NULL;
+    HTC_FRAME_HDR   *pHdr;
+    HTC_ENDPOINT    *pEndpoint;
+    A_BOOL          asyncProc = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead));
+
+    if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) {
+            /* We use async mode to get the packets if the device layer supports it.
+             * The device layer interfaces with HIF in which HIF may have restrictions on
+             * how interrupts are processed */
+        asyncProc = TRUE;
+    }
+
+    if (pAsyncProc != NULL) {
+            /* indicate to caller how we decided to process this */
+        *pAsyncProc = asyncProc;
+    }
+
+    while (TRUE) {
+
+        pHdr = (HTC_FRAME_HDR *)&LookAhead;
+
+        if (pHdr->EndpointID >= ENDPOINT_MAX) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID));
+                /* invalid endpoint */
+            status = A_EPROTO;
+            break;
+        }
+
+        if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n",
+                    pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH));
+            status = A_EPROTO;
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[pHdr->EndpointID];
+
+        if (0 == pEndpoint->ServiceID) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID));
+                /* endpoint isn't even connected */
+            status = A_EPROTO;
+            break;
+        }
+
+            /* lock RX to get a buffer */
+        LOCK_HTC_RX(target);
+
+            /* get a packet from the endpoint recv queue */
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+
+        if (NULL == pPacket) {
+                /* check for refill handler */
+            if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) {
+                UNLOCK_HTC_RX(target);
+                    /* call the re-fill handler */
+                pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext,
+                                                    pHdr->EndpointID);
+                LOCK_HTC_RX(target);
+                    /* check if we have more buffers */
+                pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+                    /* fall through */
+            }
+        }
+
+        if (NULL == pPacket) {
+                /* this is not an error, we simply need to mark that we are waiting for buffers.*/
+            target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS;
+            target->EpWaitingForBuffers = pHdr->EndpointID;
+            status = A_NO_MEMORY;
+        }
+
+        UNLOCK_HTC_RX(target);
+
+        if (A_FAILED(status)) {
+                /* no buffers */
+            break;
+        }
+
+        AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID);
+
+            /* make sure this message can fit in the endpoint buffer */
+        if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n",
+                    pHdr->PayloadLen, pPacket->BufferLength));
+            status = A_EPROTO;
+            break;
+        }
+
+        pPacket->HTCReserved = LookAhead; /* set expected look ahead */
+            /* set the amount of data to fetch */
+        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+        if (asyncProc) {
+                /* we use async mode to get the packet if the device layer supports it
+                 * set our callback and context */
+            pPacket->Completion = HTCRecvCompleteHandler;
+            pPacket->pContext = target;
+        } else {
+                /* fully synchronous */
+            pPacket->Completion = NULL;
+        }
+
+            /* go fetch the packet */
+        status = HTCIssueRecv(target, pPacket);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (asyncProc) {
+                /* we did this asynchronously so we can get out of the loop, the asynch processing
+                 * creates a chain of requests to continue processing pending messages in the
+                 * context of callbacks  */
+            break;
+        }
+
+            /* in the sync case, we process the packet, check lookaheads and then repeat */
+
+        LookAhead = 0;
+        status = HTCProcessRecvHeader(target,pPacket,&LookAhead);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead);
+        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+        pPacket = NULL;
+
+        if (0 == LookAhead) {
+            break;
+        }
+
+    }
+
+    if (A_NO_MEMORY == status) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n",
+                pHdr->EndpointID));
+            /* try to stop receive at the device layer */
+        DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC);
+        status = A_OK;
+    } else if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                        ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n",
+                        LookAhead, status));
+        if (pPacket != NULL) {
+                /* clean up packet on error */
+            HTC_RECYCLE_RX_PKT(target, pPacket);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n"));
+
+    return status;
+}
+
+/* Makes a buffer available to the HTC module */
+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT *pEndpoint;
+    A_BOOL       unblockRecv = FALSE;
+    A_STATUS     status = A_OK;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n",
+                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength));
+
+    do {
+
+        if (HTC_STOPPING(target)) {
+            status = A_ECANCELED;
+            break;
+        }
+
+        AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+
+        pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+        LOCK_HTC_RX(target);
+
+            /* store receive packet */
+        HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket);
+
+            /* check if we are blocked waiting for a new buffer */
+        if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) {
+            if (target->EpWaitingForBuffers == pPacket->Endpoint) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n",
+                    target->EpWaitingForBuffers));
+                target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS;
+                target->EpWaitingForBuffers = ENDPOINT_MAX;
+                unblockRecv = TRUE;
+            }
+        }
+
+        UNLOCK_HTC_RX(target);
+
+        if (unblockRecv && !HTC_STOPPING(target)) {
+                /* TODO : implement a buffer threshold count? */
+            DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC);
+        }
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint)
+{
+    HTC_PACKET  *pPacket;
+
+    LOCK_HTC_RX(target);
+
+    while (1) {
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+        if (NULL == pPacket) {
+            break;
+        }
+        UNLOCK_HTC_RX(target);
+        pPacket->Status = A_ECANCELED;
+        pPacket->ActualLength = 0;
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("  Flushing RX packet:0x%X, length:%d, ep:%d \n",
+                (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint));
+            /* give the packet back */
+        pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext,
+                                      pPacket);
+        LOCK_HTC_RX(target);
+    }
+
+    UNLOCK_HTC_RX(target);
+
+
+}
+
+void HTCFlushRecvBuffers(HTC_TARGET *target)
+{
+    HTC_ENDPOINT    *pEndpoint;
+    int             i;
+
+        /* NOTE: no need to flush endpoint 0, these buffers were
+         * allocated as part of the HTC struct */
+    for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) {
+        pEndpoint = &target->EndPoint[i];
+        if (pEndpoint->ServiceID == 0) {
+                /* not in use.. */
+            continue;
+        }
+        HTCFlushEndpointRX(target,pEndpoint);
+    }
+
+
+}
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_send.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_send.c
new file mode 100644
index 0000000..cf0dabe
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_send.c
@@ -0,0 +1,538 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define DO_EP_TX_COMPLETION(ep,p)                                    \
+{                                                                    \
+    (p)->Completion = NULL;                                          \
+    (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p));  \
+}
+
+
+/* call the distribute credits callback with the distribution */
+#define DO_DISTRIBUTION(t,reason,description,pList) \
+{                                             \
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,           \
+        ("  calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \
+                (description),                                           \
+                (A_UINT32)(t)->DistributeCredits,                        \
+                (A_UINT32)(t)->pCredDistContext,                         \
+                (A_UINT32)pList));                                       \
+    (t)->DistributeCredits((t)->pCredDistContext,                        \
+                           (pList),                                      \
+                           (reason));                                    \
+}
+
+/* our internal send packet completion handler when packets are submited to the AR6K device
+ * layer */
+static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+
+    if (A_FAILED(pPacket->Status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+            ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+    }
+        /* first, fixup the head room we allocated */
+    pPacket->pBuffer += HTC_HDR_LENGTH;
+        /* do completion */
+    DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+}
+
+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags)
+{
+    A_STATUS status;
+    A_UINT8 *pHdrBuf;
+    A_BOOL   sync = FALSE;
+
+        /* caller always provides headrooom */
+    pPacket->pBuffer -= HTC_HDR_LENGTH;
+    pHdrBuf = pPacket->pBuffer;
+        /* setup frame header */
+    A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength);
+    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags);
+    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint);
+
+    if (pPacket->Completion == NULL) {
+            /* mark that this request was synchronously issued */
+        sync = TRUE;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+-HTCIssueSend: transmit length : %d (%s) \n",
+                    pPacket->ActualLength + HTC_HDR_LENGTH,
+                    sync ? "SYNC" : "ASYNC" ));
+
+        /* send message to device */
+    status = DevSendPacket(&target->Device,
+                           pPacket,
+                           pPacket->ActualLength + HTC_HDR_LENGTH);
+
+    if (sync) {
+            /* use local sync variable.  If this was issued asynchronously, pPacket is no longer
+             * safe to access. */
+        pPacket->pBuffer += HTC_HDR_LENGTH;
+    }
+
+    /* if this request was asynchronous, the packet completion routine will be invoked by
+     * the device layer when the HIF layer completes the request */
+
+    return status;
+}
+
+/* try to send the current packet or a packet at the head of the TX queue,
+ * if there are no credits, the packet remains in the queue. */
+static void HTCTrySend(HTC_TARGET      *target,
+                       HTC_PACKET      *pPacketToSend,
+                       HTC_ENDPOINT_ID ep)
+{
+    HTC_PACKET   *pPacket;
+    HTC_ENDPOINT *pEndpoint;
+    int          creditsRequired;
+    A_UINT8      sendFlags;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend));
+
+    pEndpoint = &target->EndPoint[ep];
+
+    LOCK_HTC_TX(target);
+
+    if (pPacketToSend != NULL) {
+        /* caller supplied us a packet to queue to the tail of the HTC TX queue before
+         * we check the tx queue */
+        HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend);
+        pEndpoint->CurrentTxQueueDepth++;
+    }
+
+        /* now drain the TX queue for transmission as long as we have enough
+         * credits */
+
+    while (1) {
+
+        if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) {
+                /* nothing in the queue */
+            break;
+        }
+
+        sendFlags = 0;
+
+            /* get packet at head, but don't remove it */
+        pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue);
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n",
+                (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth));
+
+            /* figure out how many credits this message requires */
+        creditsRequired  = pPacket->ActualLength + HTC_HDR_LENGTH;
+        creditsRequired += target->TargetCreditSize - 1;
+        creditsRequired /= target->TargetCreditSize;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d   Got:%d\n",
+                            creditsRequired, pEndpoint->CreditDist.TxCredits));
+
+        if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+
+            /* not enough credits */
+
+            if (pPacket->Endpoint == ENDPOINT_0) {
+                    /* leave it in the queue */
+                break;
+            }
+                /* invoke the registered distribution function only if this is not
+                 * endpoint 0, we let the driver layer provide more credits if it can.
+                 * We pass the credit distribution list starting at the endpoint in question
+                 * */
+
+                /* set how many credits we need  */
+            pEndpoint->CreditDist.TxCreditsSeek =
+                                    creditsRequired - pEndpoint->CreditDist.TxCredits;
+            DO_DISTRIBUTION(target,
+                            HTC_CREDIT_DIST_SEEK_CREDITS,
+                            "Seek Credits",
+                            &pEndpoint->CreditDist);
+
+            pEndpoint->CreditDist.TxCreditsSeek = 0;
+
+            if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+                    /* still not enough credits to send, leave packet in the queue */
+                AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    (" Not enough credits for ep %d leaving packet in queue..\n",
+                    pPacket->Endpoint));
+                break;
+            }
+
+        }
+
+        pEndpoint->CreditDist.TxCredits -= creditsRequired;
+        INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired);
+
+            /* check if we need credits */
+        if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+            sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
+            INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1);
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits  \n"));
+        }
+
+            /* now we can fully dequeue */
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue);
+        pEndpoint->CurrentTxQueueDepth--;
+
+        INC_HTC_EP_STAT(pEndpoint, TxIssued, 1);
+
+        UNLOCK_HTC_TX(target);
+
+        HTCIssueSend(target, pPacket, sendFlags);
+
+        LOCK_HTC_TX(target);
+
+        /* go back and check for more messages */
+    }
+
+    if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n",
+                        ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth));
+        UNLOCK_HTC_TX(target);
+            /* queue is now full, let caller know */
+        if (pEndpoint->EpCallBacks.EpSendFull != NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n"));
+            pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep);
+        }
+    } else {
+        UNLOCK_HTC_TX(target);
+            /* queue is now available for new packet, let caller know */
+        if (pEndpoint->EpCallBacks.EpSendAvail)
+            pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend:  \n"));
+}
+
+/* HTC API - HTCSendPkt */
+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint;
+    HTC_ENDPOINT_ID ep;
+    A_STATUS        status = A_OK;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n",
+                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength));
+
+    ep = pPacket->Endpoint;
+    AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+    pEndpoint = &target->EndPoint[ep];
+
+    do {
+
+        if (HTC_STOPPING(target)) {
+            status = A_ECANCELED;
+            pPacket->Status = status;
+            DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+            break;
+        }
+            /* everything sent through this interface is asynchronous */
+            /* fill in HTC completion routines */
+        pPacket->Completion = HTCSendPktCompletionHandler;
+        pPacket->pContext = target;
+
+        HTCTrySend(target, pPacket, ep);
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n"));
+
+    return status;
+}
+
+
+/* check TX queues to drain because of credit distribution update */
+static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target)
+{
+    HTC_ENDPOINT                *pEndpoint;
+    HTC_ENDPOINT_CREDIT_DIST    *pDistItem;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n"));
+    pDistItem = target->EpCreditDistributionListHead;
+
+        /* run through the credit distribution list to see
+         * if there are packets queued
+         * NOTE: no locks need to be taken since the distribution list
+         * is not dynamic (cannot be re-ordered) and we are not modifying any state */
+    while (pDistItem != NULL) {
+        pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved;
+
+        if (pEndpoint->CurrentTxQueueDepth > 0) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n",
+                    pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth));
+                /* try to start the stalled queue, this list is ordered by priority.
+                 * Highest priority queue get's processed first, if there are credits available the
+                 * highest priority queue will get a chance to reclaim credits from lower priority
+                 * ones */
+            HTCTrySend(target, NULL, pDistItem->Endpoint);
+        }
+
+        pDistItem = pDistItem->pNext;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n"));
+}
+
+/* process credit reports and call distribution function */
+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint)
+{
+    int             i;
+    HTC_ENDPOINT    *pEndpoint;
+    int             totalCredits = 0;
+    A_BOOL          doDist = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries));
+
+        /* lock out TX while we update credits */
+    LOCK_HTC_TX(target);
+
+    for (i = 0; i < NumEntries; i++, pRpt++) {
+        if (pRpt->EndpointID >= ENDPOINT_MAX) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[pRpt->EndpointID];
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Endpoint %d got %d credits \n",
+                pRpt->EndpointID, pRpt->Credits));
+
+
+#ifdef HTC_EP_STAT_PROFILING
+
+        INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1);
+        INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits);
+
+        if (FromEndpoint == pRpt->EndpointID) {
+                /* this credit report arrived on the same endpoint indicating it arrived in an RX
+                 * packet */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1);
+        } else if (FromEndpoint == ENDPOINT_0) {
+                /* this credit arrived on endpoint 0 as a NULL message */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1);
+        } else {
+                /* arrived on another endpoint */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1);
+        }
+
+#endif
+
+        if (ENDPOINT_0 == pRpt->EndpointID) {
+                /* always give endpoint 0 credits back */
+            pEndpoint->CreditDist.TxCredits += pRpt->Credits;
+        } else {
+                /* for all other endpoints, update credits to distribute, the distribution function
+                 * will handle giving out credits back to the endpoints */
+            pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits;
+                /* flag that we have to do the distribution */
+            doDist = TRUE;
+        }
+
+        totalCredits += pRpt->Credits;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Report indicated %d credits to distribute \n", totalCredits));
+
+    if (doDist) {
+            /* this was a credit return based on a completed send operations
+             * note, this is done with the lock held */
+        DO_DISTRIBUTION(target,
+                        HTC_CREDIT_DIST_SEND_COMPLETE,
+                        "Send Complete",
+                        target->EpCreditDistributionListHead->pNext);
+    }
+
+    UNLOCK_HTC_TX(target);
+
+    if (totalCredits) {
+        HTCCheckEndpointTxQueues(target);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n"));
+}
+
+/* flush endpoint TX queue */
+static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag)
+{
+    HTC_PACKET          *pPacket;
+    HTC_PACKET_QUEUE    discardQueue;
+
+        /* initialize the discard queue */
+    INIT_HTC_PACKET_QUEUE(&discardQueue);
+
+    LOCK_HTC_TX(target);
+
+        /* interate from the front of the TX queue and flush out packets */
+    ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) {
+
+            /* check for removal */
+        if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) {
+                /* remove from queue */
+            HTC_PACKET_REMOVE(pPacket);
+                /* add it to the discard pile */
+            HTC_PACKET_ENQUEUE(&discardQueue, pPacket);
+            pEndpoint->CurrentTxQueueDepth--;
+        }
+
+    } ITERATE_END;
+
+    UNLOCK_HTC_TX(target);
+
+        /* empty the discard queue */
+    while (1) {
+        pPacket = HTC_PACKET_DEQUEUE(&discardQueue);
+        if (NULL == pPacket) {
+            break;
+        }
+        pPacket->Status = A_ECANCELED;
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("  Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n",
+                (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag));
+        DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+    }
+
+}
+
+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+#ifdef DEBUG
+    HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved;
+#endif
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d  ServiceID: 0x%X    --------------\n",
+                        pEPDist->Endpoint, pEPDist->ServiceID));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n",
+                (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags          : 0x%X \n", pEPDist->DistFlags));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm      : %d \n", pEPDist->TxCreditsNorm));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin       : %d \n", pEPDist->TxCreditsMin));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits          : %d \n", pEPDist->TxCredits));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned  : %d \n", pEPDist->TxCreditsAssigned));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek      : %d \n", pEPDist->TxCreditsSeek));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize       : %d \n", pEPDist->TxCreditSize));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist    : %d \n", pEPDist->TxCreditsToDist));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth       : %d \n", pEndpoint->CurrentTxQueueDepth));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n"));
+}
+
+void DumpCreditDistStates(HTC_TARGET *target)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead;
+
+    while (pEPList != NULL) {
+        DumpCreditDist(pEPList);
+        pEPList = pEPList->pNext;
+    }
+
+    if (target->DistributeCredits != NULL) {
+        DO_DISTRIBUTION(target,
+                        HTC_DUMP_CREDIT_STATE,
+                        "Dump State",
+                        NULL);
+    }
+}
+
+/* flush all send packets from all endpoint queues */
+void HTCFlushSendPkts(HTC_TARGET *target)
+{
+    HTC_ENDPOINT    *pEndpoint;
+    int             i;
+
+    DumpCreditDistStates(target);
+
+    for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
+        pEndpoint = &target->EndPoint[i];
+        if (pEndpoint->ServiceID == 0) {
+                /* not in use.. */
+            continue;
+        }
+        HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL);
+    }
+
+}
+
+/* HTC API to flush an endpoint's TX queue*/
+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
+
+    if (pEndpoint->ServiceID == 0) {
+        AR_DEBUG_ASSERT(FALSE);
+        /* not in use.. */
+        return;
+    }
+
+    HTCFlushEndpointTX(target, pEndpoint, Tag);
+}
+
+/* HTC API to indicate activity to the credit distribution function */
+void HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
+                               HTC_ENDPOINT_ID Endpoint,
+                               A_BOOL          Active)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
+    A_BOOL          doDist = FALSE;
+
+    if (pEndpoint->ServiceID == 0) {
+        AR_DEBUG_ASSERT(FALSE);
+        /* not in use.. */
+        return;
+    }
+
+    LOCK_HTC_TX(target);
+
+    if (Active) {
+        if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) {
+                /* mark active now */
+            pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE;
+            doDist = TRUE;
+        }
+    } else {
+        if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) {
+                /* mark inactive now */
+            pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE;
+            doDist = TRUE;
+        }
+    }
+
+    if (doDist) {
+        /* do distribution again based on activity change
+         * note, this is done with the lock held */
+        DO_DISTRIBUTION(target,
+                        HTC_CREDIT_DIST_ACTIVITY_CHANGE,
+                        "Activity Change",
+                        target->EpCreditDistributionListHead->pNext);
+    }
+
+    UNLOCK_HTC_TX(target);
+
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_services.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_services.c
new file mode 100644
index 0000000..e5d50d1
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/htc/htc_services.c
@@ -0,0 +1,403 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket)
+{
+        /* not implemented
+         * we do not send control TX frames during normal runtime, only during setup  */
+    AR_DEBUG_ASSERT(FALSE);
+}
+
+    /* callback when a control message arrives on this endpoint */
+void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
+{
+    AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);
+
+        /* the only control messages we are expecting are NULL messages (credit resports), which should
+         * never get here */
+    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCControlRecv, got message with length:%d \n",
+                    pPacket->ActualLength + HTC_HDR_LENGTH));
+
+        /* dump header and message */
+    DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
+                   pPacket->ActualLength + HTC_HDR_LENGTH,
+                   "Unexpected ENDPOINT 0 Message");
+
+    HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket);
+}
+
+A_STATUS HTCSendSetupComplete(HTC_TARGET *target)
+{
+    HTC_PACKET             *pSendPacket = NULL;
+    A_STATUS                status;
+    HTC_SETUP_COMPLETE_MSG *pSetupComplete;
+
+    do {
+           /* allocate a packet to send to the target */
+        pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+        if (NULL == pSendPacket) {
+            status = A_NO_MEMORY;
+            break;
+        }
+
+            /* assemble setup complete message */
+        pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer;
+        A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG));
+        pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID;
+
+        SET_HTC_PACKET_INFO_TX(pSendPacket,
+                               NULL,
+                               (A_UINT8 *)pSetupComplete,
+                               sizeof(HTC_SETUP_COMPLETE_MSG),
+                               ENDPOINT_0,
+                               HTC_SERVICE_TX_PACKET_TAG);
+
+            /* we want synchronous operation */
+        pSendPacket->Completion = NULL;
+            /* send the message */
+        status = HTCIssueSend(target,pSendPacket,0);
+
+    } while (FALSE);
+
+    if (pSendPacket != NULL) {
+        HTC_FREE_CONTROL_TX(target,pSendPacket);
+    }
+
+    return status;
+}
+
+
+A_STATUS HTCConnectService(HTC_HANDLE               HTCHandle,
+                           HTC_SERVICE_CONNECT_REQ  *pConnectReq,
+                           HTC_SERVICE_CONNECT_RESP *pConnectResp)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_STATUS                            status = A_OK;
+    HTC_PACKET                          *pRecvPacket = NULL;
+    HTC_PACKET                          *pSendPacket = NULL;
+    HTC_CONNECT_SERVICE_RESPONSE_MSG    *pResponseMsg;
+    HTC_CONNECT_SERVICE_MSG             *pConnectMsg;
+    HTC_ENDPOINT_ID                     assignedEndpoint = ENDPOINT_MAX;
+    HTC_ENDPOINT                        *pEndpoint;
+    int                                 maxMsgSize = 0;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n",
+               (A_UINT32)target, pConnectReq->ServiceID));
+
+    do {
+
+        AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0);
+
+        if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) {
+                /* special case for pseudo control service */
+            assignedEndpoint = ENDPOINT_0;
+            maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH;
+        } else {
+                /* allocate a packet to send to the target */
+            pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+            if (NULL == pSendPacket) {
+                AR_DEBUG_ASSERT(FALSE);
+                status = A_NO_MEMORY;
+                break;
+            }
+                /* assemble connect service message */
+            pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer;
+            AR_DEBUG_ASSERT(pConnectMsg != NULL);
+            A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG));
+            pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID;
+            pConnectMsg->ServiceID = pConnectReq->ServiceID;
+            pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags;
+                /* check caller if it wants to transfer meta data */
+            if ((pConnectReq->pMetaData != NULL) &&
+                (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+                    /* copy meta data into message buffer (after header ) */
+                A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG),
+                         pConnectReq->pMetaData,
+                         pConnectReq->MetaDataLength);
+                pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength;
+            }
+
+            SET_HTC_PACKET_INFO_TX(pSendPacket,
+                                   NULL,
+                                   (A_UINT8 *)pConnectMsg,
+                                   sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength,
+                                   ENDPOINT_0,
+                                   HTC_SERVICE_TX_PACKET_TAG);
+
+                /* we want synchronous operation */
+            pSendPacket->Completion = NULL;
+
+            status = HTCIssueSend(target,pSendPacket,0);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+                /* wait for response */
+            status = HTCWaitforControlMessage(target, &pRecvPacket);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+                /* we controlled the buffer creation so it has to be properly aligned */
+            pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer;
+
+            if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) ||
+                (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) {
+                    /* this message is not valid */
+                AR_DEBUG_ASSERT(FALSE);
+                status = A_EPROTO;
+                break;
+            }
+
+            pConnectResp->ConnectRespCode = pResponseMsg->Status;
+                /* check response status */
+            if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    (" Target failed service 0x%X connect request (status:%d)\n",
+                                pResponseMsg->ServiceID, pResponseMsg->Status));
+                status = A_EPROTO;
+                break;
+            }
+
+            assignedEndpoint = pResponseMsg->EndpointID;
+            maxMsgSize = pResponseMsg->MaxMsgSize;
+
+            if ((pConnectResp->pMetaData != NULL) &&
+                (pResponseMsg->ServiceMetaLength > 0) &&
+                (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+                    /* caller supplied a buffer and the target responded with data */
+                int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength);
+                    /* copy the meta data */
+                A_MEMCPY(pConnectResp->pMetaData,
+                         ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG),
+                         copyLength);
+                pConnectResp->ActualLength = copyLength;
+            }
+
+        }
+
+            /* the rest of these are parameter checks so set the error status */
+        status = A_EPROTO;
+
+        if (assignedEndpoint >= ENDPOINT_MAX) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        if (0 == maxMsgSize) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[assignedEndpoint];
+
+        if (pEndpoint->ServiceID != 0) {
+            /* endpoint already in use! */
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* return assigned endpoint to caller */
+        pConnectResp->Endpoint = assignedEndpoint;
+        pConnectResp->MaxMsgLength = maxMsgSize;
+
+            /* setup the endpoint */
+        pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */
+        pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth;
+        pEndpoint->MaxMsgLength = maxMsgSize;
+            /* copy all the callbacks */
+        pEndpoint->EpCallBacks = pConnectReq->EpCallbacks;
+        INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers);
+        INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue);
+            /* set the credit distribution info for this endpoint, this information is
+             * passed back to the credit distribution callback function */
+        pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID;
+        pEndpoint->CreditDist.pHTCReserved = pEndpoint;
+        pEndpoint->CreditDist.Endpoint = assignedEndpoint;
+        pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize;
+        pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize;
+
+        if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+            pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1;
+        }
+
+        status = A_OK;
+
+    } while (FALSE);
+
+    if (pSendPacket != NULL) {
+        HTC_FREE_CONTROL_TX(target,pSendPacket);
+    }
+
+    if (pRecvPacket != NULL) {
+        HTC_FREE_CONTROL_RX(target,pRecvPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n"));
+
+    return status;
+}
+
+static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry;
+
+    if (NULL == target->EpCreditDistributionListHead) {
+        target->EpCreditDistributionListHead = pEpDist;
+        pEpDist->pNext = NULL;
+        pEpDist->pPrev = NULL;
+        return;
+    }
+
+        /* queue to the end of the list, this does not have to be very
+         * fast since this list is built at startup time */
+    pCurEntry = target->EpCreditDistributionListHead;
+
+    while (pCurEntry) {
+        pLastEntry = pCurEntry;
+        pCurEntry = pCurEntry->pNext;
+    }
+
+    pLastEntry->pNext = pEpDist;
+    pEpDist->pPrev = pLastEntry;
+    pEpDist->pNext = NULL;
+}
+
+
+
+/* default credit init callback */
+static void HTCDefaultCreditInit(void                     *Context,
+                                 HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                 int                      TotalCredits)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      totalEps = 0;
+    int                      creditsPerEndpoint;
+
+    pCurEpDist = pEPList;
+        /* first run through the list and figure out how many endpoints we are dealing with */
+    while (pCurEpDist != NULL) {
+        pCurEpDist = pCurEpDist->pNext;
+        totalEps++;
+    }
+
+        /* even distribution */
+    creditsPerEndpoint = TotalCredits/totalEps;
+
+    pCurEpDist = pEPList;
+        /* run through the list and set minimum and normal credits and
+         * provide the endpoint with some credits to start */
+    while (pCurEpDist != NULL) {
+
+        if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) {
+                /* too many endpoints and not enough credits */
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+            /* our minimum is set for at least 1 max message */
+        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+            /* this value is ignored by our credit alg, since we do
+             * not dynamically adjust credits, this is the policy of
+             * the "default" credit distribution, something simple and easy */
+        pCurEpDist->TxCreditsNorm = 0xFFFF;
+            /* give the endpoint minimum credits */
+        pCurEpDist->TxCredits = creditsPerEndpoint;
+        pCurEpDist->TxCreditsAssigned = creditsPerEndpoint;
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+}
+
+/* default credit distribution callback, NOTE, this callback holds the TX lock */
+void HTCDefaultCreditDist(void                     *Context,
+                          HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+                          HTC_CREDIT_DIST_REASON   Reason)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+
+    if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) {
+        pCurEpDist = pEPDistList;
+            /* simple distribution */
+        while (pCurEpDist != NULL) {
+            if (pCurEpDist->TxCreditsToDist > 0) {
+                    /* just give the endpoint back the credits */
+                pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+                pCurEpDist->TxCreditsToDist = 0;
+            }
+            pCurEpDist = pCurEpDist->pNext;
+        }
+    }
+
+    /* note we do not need to handle the other reason codes as this is a very
+     * simple distribution scheme, no need to seek for more credits or handle inactivity */
+}
+
+void HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
+                              void                     *pCreditDistContext,
+                              HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+                              HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+                              HTC_SERVICE_ID           ServicePriorityOrder[],
+                              int                      ListLength)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    int i;
+    int ep;
+
+    if (CreditInitFunc != NULL) {
+            /* caller has supplied their own distribution functions */
+        target->InitCredits = CreditInitFunc;
+        AR_DEBUG_ASSERT(CreditDistFunc != NULL);
+        target->DistributeCredits = CreditDistFunc;
+        target->pCredDistContext = pCreditDistContext;
+    } else {
+        /* caller wants HTC to do distribution */
+        /* if caller wants service to handle distributions then
+         * it must set both of these to NULL! */
+        AR_DEBUG_ASSERT(CreditDistFunc == NULL);
+        target->InitCredits = HTCDefaultCreditInit;
+        target->DistributeCredits = HTCDefaultCreditDist;
+        target->pCredDistContext = target;
+    }
+
+        /* always add HTC control endpoint first, we only expose the list after the
+         * first one, this is added for TX queue checking */
+    AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist);
+
+        /* build the list of credit distribution structures in priority order
+         * supplied by the caller, these will follow endpoint 0 */
+    for (i = 0; i < ListLength; i++) {
+            /* match services with endpoints and add the endpoints to the distribution list
+             * in FIFO order */
+        for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
+            if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) {
+                    /* queue this one to the list */
+                AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist);
+                break;
+            }
+        }
+        AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+    }
+
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6001_regdump.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6001_regdump.h
new file mode 100644
index 0000000..c1bcade
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6001_regdump.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __AR6000_REGDUMP_H__
+#define __AR6000_REGDUMP_H__
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+
+struct MIPS_exception_frame_s {
+    A_UINT32 pc;        /* Program Counter */
+    A_UINT32 at;        /* MIPS General Purpose registers */
+    A_UINT32 v0;
+    A_UINT32 v1;
+    A_UINT32 a0;
+    A_UINT32 a1;
+    A_UINT32 a2;
+    A_UINT32 a3;
+    A_UINT32 t0;
+    A_UINT32 t1;
+    A_UINT32 t2;
+    A_UINT32 t3;
+    A_UINT32 t4;
+    A_UINT32 t5;
+    A_UINT32 t6;
+    A_UINT32 t7;
+    A_UINT32 s0;
+    A_UINT32 s1;
+    A_UINT32 s2;
+    A_UINT32 s3;
+    A_UINT32 s4;
+    A_UINT32 s5;
+    A_UINT32 s6;
+    A_UINT32 s7;
+    A_UINT32 t8;
+    A_UINT32 t9;
+    A_UINT32 k0;
+    A_UINT32 k1;
+    A_UINT32 gp;
+    A_UINT32 sp;
+    A_UINT32 s8;
+    A_UINT32 ra;
+    A_UINT32 cause; /* Selected coprocessor regs */
+    A_UINT32 status;
+};
+typedef struct MIPS_exception_frame_s CPU_exception_frame_t;
+
+#endif
+
+/*
+ * Offsets into MIPS_exception_frame structure, for use in assembler code
+ * MUST MATCH C STRUCTURE ABOVE
+ */
+#define RD_pc           0
+#define RD_at           1
+#define RD_v0           2
+#define RD_v1           3
+#define RD_a0           4
+#define RD_a1           5
+#define RD_a2           6
+#define RD_a3           7
+#define RD_t0           8
+#define RD_t1           9
+#define RD_t2           10
+#define RD_t3           11
+#define RD_t4           12
+#define RD_t5           13
+#define RD_t6           14
+#define RD_t7           15
+#define RD_s0           16
+#define RD_s1           17
+#define RD_s2           18
+#define RD_s3           19
+#define RD_s4           20
+#define RD_s5           21
+#define RD_s6           22
+#define RD_s7           23
+#define RD_t8           24
+#define RD_t9           25
+#define RD_k0           26
+#define RD_k1           27
+#define RD_gp           28
+#define RD_sp           29
+#define RD_s8           30
+#define RD_ra           31
+#define RD_cause        32
+#define RD_status       33
+
+#define RD_SIZE         (34*4) /* Space for this number of words */
+
+#endif /* __AR6000_REGDUMP_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h
new file mode 100644
index 0000000..d5b2a20
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h
@@ -0,0 +1,36 @@
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET		28
+#define VER_MINOR_BIT_OFFSET		24
+#define VER_PATCH_BIT_OFFSET		16
+#define VER_BUILD_NUM_BIT_OFFSET	0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15:  Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h.NEW b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h.NEW
new file mode 100644
index 0000000..d5b2a20
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6K_version.h.NEW
@@ -0,0 +1,36 @@
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET		28
+#define VER_MINOR_BIT_OFFSET		24
+#define VER_PATCH_BIT_OFFSET		16
+#define VER_BUILD_NUM_BIT_OFFSET	0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15:  Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6Khwreg.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6Khwreg.h
new file mode 100644
index 0000000..ecfdf20
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/AR6Khwreg.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions for AR6001 registers
+ * that may be directly manipulated by Host software.
+ */
+
+#ifndef __AR6KHWREG_H__
+#define __AR6KHWREG_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Host registers */
+#define HOST_INT_STATUS_ADDRESS                  0x00000400
+#define CPU_INT_STATUS_ADDRESS                   0x00000401
+#define ERROR_INT_STATUS_ADDRESS                 0x00000402
+#define INT_STATUS_ENABLE_ADDRESS                0x00000418
+#define CPU_INT_STATUS_ENABLE_ADDRESS            0x00000419
+#define COUNT_ADDRESS                            0x00000420
+#define COUNT_DEC_ADDRESS                        0x00000440
+#define WINDOW_DATA_ADDRESS                      0x00000474
+#define WINDOW_WRITE_ADDR_ADDRESS                0x00000478
+#define WINDOW_READ_ADDR_ADDRESS                 0x0000047c
+
+/* Target addresses */
+#define RESET_CONTROL_ADDRESS                    0x0c000000
+#define MC_REMAP_VALID_ADDRESS                   0x0c004080
+#define MC_REMAP_SIZE_ADDRESS                    0x0c004100
+#define MC_REMAP_COMPARE_ADDRESS                 0x0c004180
+#define MC_REMAP_TARGET_ADDRESS                  0x0c004200
+#define LOCAL_COUNT_ADDRESS                      0x0c014080
+#define LOCAL_SCRATCH_ADDRESS                    0x0c0140c0
+
+
+#define INT_STATUS_ENABLE_ERROR_MSB              7
+#define INT_STATUS_ENABLE_ERROR_LSB              7
+#define INT_STATUS_ENABLE_ERROR_MASK             0x00000080
+#define INT_STATUS_ENABLE_ERROR_GET(x)           (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB)
+#define INT_STATUS_ENABLE_ERROR_SET(x)           (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK)
+
+#define INT_STATUS_ENABLE_CPU_MSB                6
+#define INT_STATUS_ENABLE_CPU_LSB                6
+#define INT_STATUS_ENABLE_CPU_MASK               0x00000040
+#define INT_STATUS_ENABLE_CPU_GET(x)             (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB)
+#define INT_STATUS_ENABLE_CPU_SET(x)             (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK)
+
+#define INT_STATUS_ENABLE_COUNTER_MSB            4
+#define INT_STATUS_ENABLE_COUNTER_LSB            4
+#define INT_STATUS_ENABLE_COUNTER_MASK           0x00000010
+#define INT_STATUS_ENABLE_COUNTER_GET(x)         (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB)
+#define INT_STATUS_ENABLE_COUNTER_SET(x)         (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK)
+
+#define INT_STATUS_ENABLE_MBOX_DATA_MSB          3
+#define INT_STATUS_ENABLE_MBOX_DATA_LSB          0
+#define INT_STATUS_ENABLE_MBOX_DATA_MASK         0x0000000f
+#define INT_STATUS_ENABLE_MBOX_DATA_GET(x)       (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB)
+#define INT_STATUS_ENABLE_MBOX_DATA_SET(x)       (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK)
+
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB     1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB     1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK    0x00000002
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x)  (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x)  (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK)
+
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB      0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB      0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK     0x00000001
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x)   (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x)   (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK)
+
+
+#define CPU_INT_STATUS_ENABLE_BIT_MSB            7
+#define CPU_INT_STATUS_ENABLE_BIT_LSB            0
+#define CPU_INT_STATUS_ENABLE_BIT_MASK           0x000000ff
+#define CPU_INT_STATUS_ENABLE_BIT_GET(x)         (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB)
+#define CPU_INT_STATUS_ENABLE_BIT_SET(x)         (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK)
+
+#define COUNTER_INT_STATUS_ENABLE_BIT_MSB        7
+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB        0
+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK       0x000000ff
+#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x)     (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB)
+#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x)     (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK)
+
+#define ERROR_INT_STATUS_WAKEUP_MSB              2
+#define ERROR_INT_STATUS_WAKEUP_LSB              2
+#define ERROR_INT_STATUS_WAKEUP_MASK             0x00000004
+#define ERROR_INT_STATUS_WAKEUP_GET(x)           (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB)
+#define ERROR_INT_STATUS_WAKEUP_SET(x)           (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK)
+
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB        1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB        1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK       0x00000002
+#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x)     (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB)
+#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x)     (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK)
+
+#define ERROR_INT_STATUS_TX_OVERFLOW_MSB         0
+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB         0
+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK        0x00000001
+#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x)      (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB)
+#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x)      (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK)
+
+#define HOST_INT_STATUS_ERROR_MSB                7
+#define HOST_INT_STATUS_ERROR_LSB                7
+#define HOST_INT_STATUS_ERROR_MASK               0x00000080
+#define HOST_INT_STATUS_ERROR_GET(x)             (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB)
+#define HOST_INT_STATUS_ERROR_SET(x)             (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK)
+
+#define HOST_INT_STATUS_CPU_MSB                  6
+#define HOST_INT_STATUS_CPU_LSB                  6
+#define HOST_INT_STATUS_CPU_MASK                 0x00000040
+#define HOST_INT_STATUS_CPU_GET(x)               (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB)
+#define HOST_INT_STATUS_CPU_SET(x)               (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK)
+
+#define HOST_INT_STATUS_COUNTER_MSB              4
+#define HOST_INT_STATUS_COUNTER_LSB              4
+#define HOST_INT_STATUS_COUNTER_MASK             0x00000010
+#define HOST_INT_STATUS_COUNTER_GET(x)           (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB)
+#define HOST_INT_STATUS_COUNTER_SET(x)           (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK)
+
+#define RESET_CONTROL_WARM_RST_MSB               7
+#define RESET_CONTROL_WARM_RST_LSB               7
+#define RESET_CONTROL_WARM_RST_MASK              0x00000080
+#define RESET_CONTROL_WARM_RST_GET(x)            (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB)
+#define RESET_CONTROL_WARM_RST_SET(x)            (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK)
+
+#define RESET_CONTROL_COLD_RST_MSB               8
+#define RESET_CONTROL_COLD_RST_LSB               8
+#define RESET_CONTROL_COLD_RST_MASK              0x00000100
+#define RESET_CONTROL_COLD_RST_GET(x)            (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB)
+#define RESET_CONTROL_COLD_RST_SET(x)            (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK)
+
+#define RESET_CAUSE_LAST_MSB                     2
+#define RESET_CAUSE_LAST_LSB                     0
+#define RESET_CAUSE_LAST_MASK                    0x00000007
+#define RESET_CAUSE_LAST_GET(x)                  (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB)
+#define RESET_CAUSE_LAST_SET(x)                  (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AR6KHWREG_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_config.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_config.h
new file mode 100644
index 0000000..627b298
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_config.h
@@ -0,0 +1,27 @@
+#ifndef _A_CONFIG_H_
+#define _A_CONFIG_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This file contains software configuration options that enables
+ * specific software "features"
+ */
+#include "../ar6000/config_linux.h"
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_debug.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_debug.h
new file mode 100644
index 0000000..4b0b351
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_debug.h
@@ -0,0 +1,41 @@
+#ifndef _A_DEBUG_H_
+#define _A_DEBUG_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_types.h>
+#include <a_osapi.h>
+
+#define DBG_INFO		0x00000001
+#define DBG_ERROR		0x00000002
+#define DBG_WARNING		0x00000004
+#define DBG_SDIO		0x00000008
+#define DBG_HIF			0x00000010
+#define DBG_HTC			0x00000020
+#define DBG_WMI			0x00000040
+#define DBG_WMI2		0x00000080
+#define DBG_DRIVER		0x00000100
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+#include "../ar6000/debug_linux.h"
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv.h
new file mode 100644
index 0000000..07e52d1
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv.h
@@ -0,0 +1,28 @@
+#ifndef _A_DRV_H_
+#define _A_DRV_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athdrv_linux.h"
+
+#endif /* _ADRV_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv_api.h
new file mode 100644
index 0000000..7531726
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_drv_api.h
@@ -0,0 +1,185 @@
+#ifndef _A_DRV_API_H_
+#define _A_DRV_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/****************************************************************************/
+/****************************************************************************/
+/**                                                                        **/
+/** WMI related hooks                                                      **/
+/**                                                                        **/
+/****************************************************************************/
+/****************************************************************************/
+
+#include <ar6000_api.h>
+
+#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList)	\
+	ar6000_channelList_rx((devt), (numChan), (chanList))
+
+#define A_WMI_SET_NUMDATAENDPTS(devt, num)	\
+	ar6000_set_numdataendpts((devt), (num))
+
+#define A_WMI_CONTROL_TX(devt, osbuf, streamID)	\
+	ar6000_control_tx((devt), (osbuf), (streamID))
+
+#define A_WMI_TARGETSTATS_EVENT(devt, pStats)	\
+	ar6000_targetStats_event((devt), (pStats))
+
+#define A_WMI_SCANCOMPLETE_EVENT(devt, status)	\
+	ar6000_scanComplete_event((devt), (status))
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+
+#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg)	\
+	ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_DSET_CLOSE(devt, access_cookie)	\
+	ar6000_dset_close((devt), (access_cookie))
+
+#endif
+
+#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \
+	ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \
+	ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo))
+
+#define A_WMI_REGDOMAIN_EVENT(devt, regCode)	\
+	ar6000_regDomain_event((devt), (regCode))
+
+#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info)	\
+	ar6000_neighborReport_event((devt), (numAps), (info))
+
+#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus)	\
+	ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus))
+
+#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast)	\
+	ar6000_tkip_micerr_event((devt), (keyid), (ismcast))
+
+#define A_WMI_BITRATE_RX(devt, rateKbps)	\
+	ar6000_bitrate_rx((devt), (rateKbps))
+
+#define A_WMI_TXPWR_RX(devt, txPwr)	\
+	ar6000_txPwr_rx((devt), (txPwr))
+
+#define A_WMI_READY_EVENT(devt, datap, phyCap)	\
+	ar6000_ready_event((devt), (datap), (phyCap))
+
+#define A_WMI_DBGLOG_INIT_DONE(ar) \
+        ar6000_dbglog_init_done(ar);
+
+#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi)	\
+	ar6000_rssiThreshold_event((devt), (newThreshold), (rssi))
+
+#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal)	\
+	ar6000_reportError_event((devt), (errorVal))
+
+#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \
+	ar6000_roam_tbl_event((devt), (pTbl))
+
+#define A_WMI_ROAM_DATA_EVENT(devt, p) \
+	ar6000_roam_data_event((devt), (p))
+
+#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters)	\
+	ar6000_wow_list_event((devt), (num_filters), (wow_filters))
+
+#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion)  \
+	ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion))
+
+#define A_WMI_IPTOS_TO_USERPRIORITY(pkt)    \
+	ar6000_iptos_to_userPriority((pkt))
+
+#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list)	\
+	ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list))
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+
+#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \
+	ar6000_gpio_intr_rx((intr_mask), (input_values))
+
+#define A_WMI_GPIO_DATA_RX(reg_id, value) \
+	ar6000_gpio_data_rx((reg_id), (value))
+
+#define A_WMI_GPIO_ACK_RX() \
+	ar6000_gpio_ack_rx()
+
+#endif
+
+#ifdef SEND_EVENT_TO_APP
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \
+	ar6000_send_event_to_app((ar), (eventId), (datap), (len))
+
+#else
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len)
+
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \
+	ar6000_tcmd_rx_report_event((devt), (results), (len))
+#endif
+
+#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source)    \
+    ar6000_hbChallengeResp_event((devt), (cookie), (source))
+
+#define A_WMI_TX_RETRY_ERR_EVENT(devt) \
+	ar6000_tx_retry_err_event((devt))
+
+#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \
+	ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr))
+
+#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \
+	ar6000_lqThresholdEvent_rx((devt), (range), (lqVal))
+
+#define A_WMI_RATEMASK_RX(devt, ratemask) \
+	ar6000_ratemask_rx((devt), (ratemask))
+
+#define A_WMI_KEEPALIVE_RX(devt, configured)    \
+        ar6000_keepalive_rx((devt), (configured))
+
+#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len)   \
+        ar6000_bssInfo_event_rx((ar), (datap), (len))
+
+#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \
+        ar6000_dbglog_event((ar), (dropped), (buffer), (length));
+
+#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \
+    ar6000_indicate_tx_activity((devt),(trafficClass), TRUE)
+
+#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \
+    ar6000_indicate_tx_activity((devt),(trafficClass), FALSE)
+
+/****************************************************************************/
+/****************************************************************************/
+/**                                                                        **/
+/** HTC related hooks                                                      **/
+/**                                                                        **/
+/****************************************************************************/
+/****************************************************************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_osapi.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_osapi.h
new file mode 100644
index 0000000..7d60867
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_osapi.h
@@ -0,0 +1,28 @@
+#ifndef _A_OSAPI_H_
+#define _A_OSAPI_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/osapi_linux.h"
+
+#endif /* _OSAPI_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_types.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_types.h
new file mode 100644
index 0000000..e2ed090
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/a_types.h
@@ -0,0 +1,28 @@
+#ifndef _A_TYPES_H_
+#define _A_TYPES_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athtypes_linux.h"
+
+#endif /* _ATHTYPES_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_api.h
new file mode 100644
index 0000000..abe5de7
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_api.h
@@ -0,0 +1,29 @@
+#ifndef _AR6000_API_H_
+#define _AR6000_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API to access the OS dependent atheros host driver
+ * by the WMI or WLAN generic modules.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/ar6xapi_linux.h"
+
+#endif /* _AR6000_API_H */
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_diag.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_diag.h
new file mode 100644
index 0000000..2df131d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ar6000_diag.h
@@ -0,0 +1,38 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6000_DIAG_H_
+#define AR6000_DIAG_H_
+
+
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                    A_UCHAR *data, A_UINT32 length);
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                     A_UCHAR *data, A_UINT32 length);
+
+#endif /*AR6000_DIAG_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdefs.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdefs.h
new file mode 100644
index 0000000..c28c871
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdefs.h
@@ -0,0 +1,85 @@
+#ifndef __ATHDEFS_H__
+#define __ATHDEFS_H__
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains definitions that may be used across both
+ * Host and Target software.  Nothing here is module-dependent
+ * or platform-dependent.
+ */
+
+/*
+ * Generic error codes that can be used by hw, sta, ap, sim, dk
+ * and any other environments. Since these are enums, feel free to
+ * add any more codes that you need.
+ */
+
+typedef enum {
+    A_ERROR = -1,               /* Generic error return */
+    A_OK = 0,                   /* success */
+                                /* Following values start at 1 */
+    A_DEVICE_NOT_FOUND,         /* not able to find PCI device */
+    A_NO_MEMORY,                /* not able to allocate memory, not available */
+    A_MEMORY_NOT_AVAIL,         /* memory region is not free for mapping */
+    A_NO_FREE_DESC,             /* no free descriptors available */
+    A_BAD_ADDRESS,              /* address does not match descriptor */
+    A_WIN_DRIVER_ERROR,         /* used in NT_HW version, if problem at init */
+    A_REGS_NOT_MAPPED,          /* registers not correctly mapped */
+    A_EPERM,                    /* Not superuser */
+    A_EACCES,                   /* Access denied */
+    A_ENOENT,                   /* No such entry, search failed, etc. */
+    A_EEXIST,                   /* The object already exists (can't create) */
+    A_EFAULT,                   /* Bad address fault */
+    A_EBUSY,                    /* Object is busy */
+    A_EINVAL,                   /* Invalid parameter */
+    A_EMSGSIZE,                 /* Inappropriate message buffer length */
+    A_ECANCELED,                /* Operation canceled */
+    A_ENOTSUP,                  /* Operation not supported */
+    A_ECOMM,                    /* Communication error on send */
+    A_EPROTO,                   /* Protocol error */
+    A_ENODEV,                   /* No such device */
+    A_EDEVNOTUP,                /* device is not UP */
+    A_NO_RESOURCE,              /* No resources for requested operation */
+    A_HARDWARE,                 /* Hardware failure */
+    A_PENDING,                  /* Asynchronous routine; will send up results la
+ter (typically in callback) */
+    A_EBADCHANNEL,              /* The channel cannot be used */
+    A_DECRYPT_ERROR,            /* Decryption error */
+    A_PHY_ERROR,                /* RX PHY error */
+    A_CONSUMED                  /* Object was consumed */
+} A_STATUS;
+
+#define A_SUCCESS(x)        (x == A_OK)
+#define A_FAILED(x)         (!A_SUCCESS(x))
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/*
+ * The following definition is WLAN specific definition
+ */
+typedef enum {
+    MODE_11A = 0,   /* 11a Mode */
+    MODE_11G = 1,   /* 11g + 11b Mode */
+    MODE_11B = 2,   /* 11b Mode */
+    MODE_11GONLY = 3, /* 11g only Mode */
+    MODE_UNKNOWN = 4,
+    MODE_MAX = 4
+} WLAN_PHY_MODE;
+
+typedef enum {
+    WLAN_11A_CAPABILITY   = 1,
+    WLAN_11G_CAPABILITY   = 2,
+    WLAN_11AG_CAPABILITY  = 3,
+}WLAN_CAPABILITY;
+
+#endif /* __ATHDEFS_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdrv.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdrv.h
new file mode 100644
index 0000000..19da97e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athdrv.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_H_
+#define _ATHDRV_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ATHDRV_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athendpack.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athendpack.h
new file mode 100644
index 0000000..42921ae
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athendpack.h
@@ -0,0 +1,41 @@
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athendpack.h
+ *
+ * @abstract: end compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athendpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athendpack_wince.h"
+#endif /* WINCE */
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athstartpack.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athstartpack.h
new file mode 100644
index 0000000..6632cc2
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/athstartpack.h
@@ -0,0 +1,42 @@
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athstartpack.h
+ *
+ * @abstract: start compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athstartpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athstartpack_wince.h"
+#endif /* WINCE */
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi.h
new file mode 100644
index 0000000..2eb7134
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi.h
@@ -0,0 +1,100 @@
+#ifndef _BMI_H_
+#define _BMI_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * BMI declarations and prototypes
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+#include "a_osapi.h"
+#include "bmi_msg.h"
+
+void
+BMIInit(void);
+
+A_STATUS
+BMIDone(HIF_DEVICE *device);
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info);
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+              A_UINT32 address,
+              A_UCHAR *buffer,
+              A_UINT32 length);
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+               A_UINT32 address,
+               A_UCHAR *buffer,
+               A_UINT32 length);
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+           A_UINT32 address,
+           A_UINT32 *param);
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+               A_UINT32 address);
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+                   A_UINT32 address,
+                   A_UINT32 *param);
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+                    A_UINT32 address,
+                    A_UINT32 param);
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+                   A_UINT32 ROM_addr,
+                   A_UINT32 RAM_addr,
+                   A_UINT32 nbytes,
+                   A_UINT32 do_activate,
+                   A_UINT32 *patch_id);
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+                     A_UINT32 rompatch_id);
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+                    A_UINT32 rompatch_count,
+                    A_UINT32 *rompatch_list);
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+                      A_UINT32 rompatch_count,
+                      A_UINT32 *rompatch_list);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _BMI_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi_msg.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi_msg.h
new file mode 100644
index 0000000..7c91ef4
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/bmi_msg.h
@@ -0,0 +1,199 @@
+#ifndef __BMI_MSG_H__
+#define __BMI_MSG_H__
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to AR6K, to provide
+ * patches to code that is already resident on AR6K, and generally
+ * to examine and modify state.  The Host has an opportunity to use
+ * BMI only once during bootup.  Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0.   BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR6K Counter #4.  As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+
+/* Maximum data size used for BMI transfers */
+#define BMI_DATASZ_MAX                     32
+
+/* BMI Commands */
+
+#define BMI_NO_COMMAND                      0
+
+#define BMI_DONE                            1
+        /*
+         * Semantics: Host is done using BMI
+         * Request format:
+         *    A_UINT32      command (BMI_DONE)
+         * Response format: none
+         */
+
+#define BMI_READ_MEMORY                     2
+        /*
+         * Semantics: Host reads AR6K memory
+         * Request format:
+         *    A_UINT32      command (BMI_READ_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         * Response format:
+         *    A_UINT8       data[length]
+         */
+
+#define BMI_WRITE_MEMORY                    3
+        /*
+         * Semantics: Host writes AR6K memory
+         * Request format:
+         *    A_UINT32       command (BMI_WRITE_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         *    A_UINT8       data[length]
+         * Response format: none
+         */
+
+#define BMI_EXECUTE                         4
+        /*
+         * Semantics: Causes AR6K to execute code
+         * Request format:
+         *    A_UINT32      command (BMI_EXECUTE)
+         *    A_UINT32      address
+         *    A_UINT32      parameter
+         * Response format:
+         *    A_UINT32      return value
+         */
+
+#define BMI_SET_APP_START                   5
+        /*
+         * Semantics: Set Target application starting address
+         * Request format:
+         *    A_UINT32      command (BMI_SET_APP_START)
+         *    A_UINT32      address
+         * Response format: none
+         */
+
+#define BMI_READ_SOC_REGISTER               6
+        /*
+         * Semantics: Read a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_READ_REGISTER)
+         *    A_UINT32      address
+         * Response format:
+         *    A_UINT32      value
+         */
+
+#define BMI_WRITE_SOC_REGISTER              7
+        /*
+         * Semantics: Write a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_WRITE_REGISTER)
+         *    A_UINT32      address
+         *    A_UINT32      value
+         *
+         * Response format: none
+         */
+
+#define BMI_GET_TARGET_ID                  8
+#define BMI_GET_TARGET_INFO                8
+        /*
+         * Semantics: Fetch the 4-byte Target information
+         * Request format:
+         *    A_UINT32      command (BMI_GET_TARGET_ID/INFO)
+         * Response format1 (old firmware):
+         *    A_UINT32      TargetVersionID
+         * Response format2 (newer firmware):
+         *    A_UINT32      TARGET_VERSION_SENTINAL
+         *    struct bmi_target_info;
+         */
+
+struct bmi_target_info {
+    A_UINT32 target_info_byte_count; /* size of this structure */
+    A_UINT32 target_ver;             /* Target Version ID */
+    A_UINT32 target_type;            /* Target type */
+};
+#define TARGET_VERSION_SENTINAL 0xffffffff
+#define TARGET_TYPE_AR6001 1
+#define TARGET_TYPE_AR6002 2
+
+
+#define BMI_ROMPATCH_INSTALL               9
+        /*
+         * Semantics: Install a ROM Patch.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_INSTALL)
+         *    A_UINT32      Target ROM Address
+         *    A_UINT32      Target RAM Address
+         *    A_UINT32      Size, in bytes
+         *    A_UINT32      Activate? 1-->activate;
+         *                            0-->install but do not activate
+         * Response format:
+         *    A_UINT32      PatchID
+         */
+
+#define BMI_ROMPATCH_UNINSTALL             10
+        /*
+         * Semantics: Uninstall a previously-installed ROM Patch,
+         * automatically deactivating, if necessary.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_UNINSTALL)
+         *    A_UINT32      PatchID
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_ACTIVATE              11
+        /*
+         * Semantics: Activate a list of previously-installed ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_ACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_DEACTIVATE            12
+        /*
+         * Semantics: Deactivate a list of active ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_DEACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+
+#endif /* __BMI_MSG_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/common_drv.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/common_drv.h
new file mode 100644
index 0000000..1bdc3da
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/common_drv.h
@@ -0,0 +1,61 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#ifndef COMMON_DRV_H_
+#define COMMON_DRV_H_
+
+#include "hif.h"
+#include "htc_packet.h"
+
+
+
+/* structure that is the state information for the default credit distribution callback
+ * drivers should instantiate (zero-init as well) this structure in their driver instance
+ * and pass it as a context to the HTC credit distribution functions */
+typedef struct _COMMON_CREDIT_STATE_INFO {
+    int TotalAvailableCredits;      /* total credits in the system at startup */
+    int CurrentFreeCredits;         /* credits available in the pool that have not been
+                                       given out to endpoints */
+    HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist;  /* pointer to the lowest priority endpoint dist struct */
+} COMMON_CREDIT_STATE_INFO;
+
+
+/* HTC TX packet tagging definitions */
+#define AR6K_CONTROL_PKT_TAG    HTC_TX_PACKET_TAG_USER_DEFINED
+#define AR6K_DATA_PKT_TAG       (AR6K_CONTROL_PKT_TAG + 1)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* OS-independent APIs */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo);
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,  A_UCHAR *data, A_UINT32 length);
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*COMMON_DRV_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog.h
new file mode 100644
index 0000000..3d1e528
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions and data structures associated with
+ * the log based debug mechanism.
+ *
+ */
+
+#ifndef _DBGLOG_H_
+#define _DBGLOG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DBGLOG_TIMESTAMP_OFFSET          0
+#define DBGLOG_TIMESTAMP_MASK            0x0000FFFF /* Bit 0-15. Contains bit
+                                                       8-23 of the LF0 timer */
+#define DBGLOG_DBGID_OFFSET              16
+#define DBGLOG_DBGID_MASK                0x03FF0000 /* Bit 16-25 */
+#define DBGLOG_DBGID_NUM_MAX             256 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULEID_OFFSET           26
+#define DBGLOG_MODULEID_MASK             0x3C000000 /* Bit 26-29 */
+#define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
+
+/*
+ * Please ensure that the definition of any new module intrduced is captured
+ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The
+ * structure is required for the parser to correctly pick up the values for
+ * different modules.
+ */
+#define DBGLOG_MODULEID_START
+#define DBGLOG_MODULEID_INF                   0
+#define DBGLOG_MODULEID_WMI                   1
+#define DBGLOG_MODULEID_CSERV                 2
+#define DBGLOG_MODULEID_PM                    3
+#define DBGLOG_MODULEID_TXRX_MGMTBUF          4
+#define DBGLOG_MODULEID_TXRX_TXBUF            5
+#define DBGLOG_MODULEID_TXRX_RXBUF            6
+#define DBGLOG_MODULEID_WOW                   7
+#define DBGLOG_MODULEID_WHAL                  8
+#define DBGLOG_MODULEID_END
+
+#define DBGLOG_NUM_ARGS_OFFSET             30
+#define DBGLOG_NUM_ARGS_MASK               0xC0000000 /* Bit 30-31 */
+#define DBGLOG_NUM_ARGS_MAX                2 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULE_LOG_ENABLE_OFFSET    0
+#define DBGLOG_MODULE_LOG_ENABLE_MASK      0x0000FFFF
+
+#define DBGLOG_REPORTING_ENABLED_OFFSET    16
+#define DBGLOG_REPORTING_ENABLED_MASK      0x00010000
+
+#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17
+#define DBGLOG_TIMESTAMP_RESOLUTION_MASK   0x000E0000
+
+#define DBGLOG_REPORT_SIZE_OFFSET          20
+#define DBGLOG_REPORT_SIZE_MASK            0x3FF00000
+
+#define DBGLOG_LOG_BUFFER_SIZE             1500
+#define DBGLOG_DBGID_DEFINITION_LEN_MAX    64
+
+struct dbglog_buf_s {
+    struct dbglog_buf_s *next;
+    A_INT8              *buffer;
+    A_UINT32             bufsize;
+    A_UINT32             length;
+    A_UINT32             count;
+    A_UINT32             free;
+};
+
+struct dbglog_hdr_s {
+    struct dbglog_buf_s *dbuf;
+    A_UINT32             dropped;
+};
+
+struct dbglog_config_s {
+    A_UINT32                    cfgvalid; /* Mask with valid config bits */
+    union {
+        /* TODO: Take care of endianness */
+        struct {
+            A_UINT32            mmask:16; /* Mask of modules with logging on */
+            A_UINT32            rep:1; /* Reporting enabled or not */
+            A_UINT32            tsr:3; /* Time stamp resolution. Def: 1 ms */
+            A_UINT32            size:10; /* Report size in number of messages */
+            A_UINT32            reserved:2;
+        } dbglog_config;
+
+        A_UINT32                value;
+    } u;
+};
+
+#define cfgmmask                   u.dbglog_config.mmask
+#define cfgrep                     u.dbglog_config.rep
+#define cfgtsr                     u.dbglog_config.tsr
+#define cfgsize                    u.dbglog_config.size
+#define cfgvalue                   u.value
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_api.h
new file mode 100644
index 0000000..06c8102
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_api.h
@@ -0,0 +1,46 @@
+#ifndef _DBGLOG_API_H_
+#define _DBGLOG_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * This file contains host side debug primitives.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "dbglog.h"
+
+#define DBGLOG_HOST_LOG_BUFFER_SIZE            DBGLOG_LOG_BUFFER_SIZE
+
+#define DBGLOG_GET_DBGID(arg) \
+    ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
+
+#define DBGLOG_GET_MODULEID(arg) \
+    ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
+
+#define DBGLOG_GET_NUMARGS(arg) \
+    ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
+
+#define DBGLOG_GET_TIMESTAMP(arg) \
+    ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_id.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_id.h
new file mode 100644
index 0000000..ce22b16
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dbglog_id.h
@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the debug identifiers for different
+ * modules.
+ *
+ */
+
+#ifndef _DBGLOG_ID_H_
+#define _DBGLOG_ID_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
+ * Please ensure that the definition of any new debugid introduced is captured
+ * between the <MODULE>_DBGID_DEFINITION_START and
+ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
+ * parser to correctly pick up the values for different debug identifiers.
+ */
+
+/* INF debug identifier definitions */
+#define INF_DBGID_DEFINITION_START
+#define INF_ASSERTION_FAILED                          1
+#define INF_TARGET_ID                                 2
+#define INF_DBGID_DEFINITION_END
+
+/* WMI debug identifier definitions */
+#define WMI_DBGID_DEFINITION_START
+#define WMI_CMD_RX_XTND_PKT_TOO_SHORT                 1
+#define WMI_EXTENDED_CMD_NOT_HANDLED                  2
+#define WMI_CMD_RX_PKT_TOO_SHORT                      3
+#define WMI_CALLING_WMI_EXTENSION_FN                  4
+#define WMI_CMD_NOT_HANDLED                           5
+#define WMI_IN_SYNC                                   6
+#define WMI_TARGET_WMI_SYNC_CMD                       7
+#define WMI_SET_SNR_THRESHOLD_PARAMS                  8
+#define WMI_SET_RSSI_THRESHOLD_PARAMS                 9
+#define WMI_SET_LQ_TRESHOLD_PARAMS                   10
+#define WMI_TARGET_CREATE_PSTREAM_CMD                11
+#define WMI_WI_DTM_INUSE                             12
+#define WMI_TARGET_DELETE_PSTREAM_CMD                13
+#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD       14
+#define WMI_TARGET_GET_BIT_RATE_CMD                  15
+#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS       16
+#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD        17
+#define WMI_TARGET_GET_TX_PWR_CMD                    18
+#define WMI_FREE_EVBUF_WMIBUF                        19
+#define WMI_FREE_EVBUF_DATABUF                       20
+#define WMI_FREE_EVBUF_BADFLAG                       21
+#define WMI_HTC_RX_ERROR_DATA_PACKET                 22
+#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX             23
+#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT      24
+#define WMI_SENDING_READY_EVENT                      25
+#define WMI_SETPOWER_MDOE_TO_MAXPERF                 26
+#define WMI_SETPOWER_MDOE_TO_REC                     27
+#define WMI_BSSINFO_EVENT_FROM                       28
+#define WMI_TARGET_GET_STATS_CMD                     29
+#define WMI_SENDING_SCAN_COMPLETE_EVENT              30
+#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT        31
+#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT       32
+#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT     33
+#define WMI_SENDING_ERROR_REPORT_EVENT               34
+#define WMI_SENDING_CAC_EVENT                        35
+#define WMI_TARGET_GET_ROAM_TABLE_CMD                36
+#define WMI_TARGET_GET_ROAM_DATA_CMD                 37
+#define WMI_SENDING_GPIO_INTR_EVENT                  38
+#define WMI_SENDING_GPIO_ACK_EVENT                   39
+#define WMI_SENDING_GPIO_DATA_EVENT                  40
+#define WMI_CMD_RX                                   41
+#define WMI_CMD_RX_XTND                              42
+#define WMI_EVENT_SEND                               43
+#define WMI_EVENT_SEND_XTND                          44
+#define WMI_DBGID_DEFINITION_END
+
+/* CSERV debug identifier definitions */
+#define CSERV_DBGID_DEFINITION_START
+#define CSERV_BEGIN_SCAN1                             1
+#define CSERV_BEGIN_SCAN2                             2
+#define CSERV_END_SCAN1                               3
+#define CSERV_END_SCAN2                               4
+#define CSERV_CHAN_SCAN_START                         5
+#define CSERV_CHAN_SCAN_STOP                          6
+#define CSERV_CHANNEL_OPPPORTUNITY                    7
+#define CSERV_NC_TIMEOUT                              8
+#define CSERV_BACK_HOME                              10
+#define CSERV_CHMGR_CH_CALLBACK1                     11
+#define CSERV_CHMGR_CH_CALLBACK2                     12
+#define CSERV_CHMGR_CH_CALLBACK3                     13
+#define CSERV_SET_SCAN_PARAMS1                       14
+#define CSERV_SET_SCAN_PARAMS2                       15
+#define CSERV_SET_SCAN_PARAMS3                       16
+#define CSERV_SET_SCAN_PARAMS4                       17
+#define CSERV_ABORT_SCAN                             18
+#define CSERV_NEWSTATE                               19
+#define CSERV_MINCHMGR_OP_END                        20
+#define CSERV_CHMGR_OP_END                           21
+#define CSERV_DISCONNECT_TIMEOUT                     22
+#define CSERV_ROAM_TIMEOUT                           23
+#define CSERV_FORCE_SCAN1                            24
+#define CSERV_FORCE_SCAN2                            25
+#define CSERV_FORCE_SCAN3                            26
+#define CSERV_UTIL_TIMEOUT                           27
+#define CSERV_RSSIPOLLER                             28
+#define CSERV_RETRY_CONNECT_TIMEOUT                  29
+#define CSERV_RSSIINDBMPOLLER                        30
+#define CSERV_BGSCAN_ENABLE                          31
+#define CSERV_BGSCAN_DISABLE                         32
+#define CSERV_WLAN_START_SCAN_CMD1                   33
+#define CSERV_WLAN_START_SCAN_CMD2                   34
+#define CSERV_WLAN_START_SCAN_CMD3                   35
+#define CSERV_START_SCAN_CMD                         36
+#define CSERV_START_FORCE_SCAN                       37
+#define CSERV_NEXT_CHAN                              38
+#define CSERV_SET_REGCODE                            39
+#define CSERV_START_ADHOC                            40
+#define CSERV_ADHOC_AT_HOME                          41
+#define CSERV_OPT_AT_HOME                            42
+#define CSERV_WLAN_CONNECT_CMD                       43
+#define CSERV_WLAN_RECONNECT_CMD                     44
+#define CSERV_WLAN_DISCONNECT_CMD                    45
+#define CSERV_BSS_CHANGE_CHANNEL                     46
+#define CSERV_BEACON_RX                              47
+#define CSERV_KEEPALIVE_CHECK                        48
+#define CSERV_RC_BEGIN_SCAN                          49
+#define CSERV_RC_SCAN_START                          50
+#define CSERV_RC_SCAN_STOP                           51
+#define CSERV_RC_NEXT                                52
+#define CSERV_RC_SCAN_END                            53
+#define CSERV_PROBE_CALLBACK                         54
+#define CSERV_ROAM1                                  55
+#define CSERV_ROAM2                                  56
+#define CSERV_ROAM3                                  57
+#define CSERV_CONNECT_EVENT                          58
+#define CSERV_DISCONNECT_EVENT                       59
+#define CSERV_BMISS_HANDLER1                         60
+#define CSERV_BMISS_HANDLER2                         61
+#define CSERV_BMISS_HANDLER3                         62
+#define CSERV_LOWRSSI_HANDLER                        63
+#define CSERV_WLAN_SET_PMKID_CMD                     64
+#define CSERV_RECONNECT_REQUEST                      65
+#define CSERV_KEYSPLUMBED_EVENT                      66
+#define CSERV_NEW_REG                                67
+#define CSERV_SET_RSSI_THOLD                         68
+#define CSERV_RSSITHRESHOLDCHECK                     69
+#define CSERV_RSSIINDBMTHRESHOLDCHECK                70
+#define CSERV_WLAN_SET_OPT_CMD1                      71
+#define CSERV_WLAN_SET_OPT_CMD2                      72
+#define CSERV_WLAN_SET_OPT_CMD3                      73
+#define CSERV_WLAN_SET_OPT_CMD4                      74
+#define CSERV_SCAN_CONNECT_STOP                      75
+#define CSERV_BMISS_HANDLER4                         76
+#define CSERV_INITIALIZE_TIMER                       77
+#define CSERV_ARM_TIMER                              78
+#define CSERV_DISARM_TIMER                           79
+#define CSERV_UNINITIALIZE_TIMER                     80
+#define CSERV_DISCONNECT_EVENT2                      81
+#define CSERV_SCAN_CONNECT_START                     82
+#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED            83
+#define CSERV_SET_SCAN_PARAMS5                       84
+#define CSERV_DBGID_DEFINITION_END
+
+/* TXRX debug identifier definitions */
+#define TXRX_TXBUF_DBGID_DEFINITION_START
+#define TXRX_TXBUF_ALLOCATE_BUF                      1
+#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX                 2
+#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ                  3
+#define TXRX_TXBUF_TXQ_DEPTH                         4
+#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ                 5
+#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ         6
+#define TXRX_TXBUF_INITIALIZE_TIMER                  7
+#define TXRX_TXBUF_ARM_TIMER                         8
+#define TXRX_TXBUF_DISARM_TIMER                      9
+#define TXRX_TXBUF_UNINITIALIZE_TIMER                10
+#define TXRX_TXBUF_DBGID_DEFINITION_END
+
+#define TXRX_RXBUF_DBGID_DEFINITION_START
+#define TXRX_RXBUF_ALLOCATE_BUF                      1
+#define TXRX_RXBUF_QUEUE_TO_HOST                     2
+#define TXRX_RXBUF_QUEUE_TO_WLAN                     3
+#define TXRX_RXBUF_ZERO_LEN_BUF                      4
+#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN  5
+#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF        6
+#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN         7
+#define TXRX_RXBUF_SEND_TO_RECV_MGMT                 8
+#define TXRX_RXBUF_SEND_TO_IEEE_LAYER                9
+#define TXRX_RXBUF_DBGID_DEFINITION_END
+
+#define TXRX_MGMTBUF_DBGID_DEFINITION_START
+#define TXRX_MGMTBUF_ALLOCATE_BUF                    1
+#define TXRX_MGMTBUF_ALLOCATE_SM_BUF                 2
+#define TXRX_MGMTBUF_ALLOCATE_RMBUF                  3
+#define TXRX_MGMTBUF_GET_BUF                         4
+#define TXRX_MGMTBUF_GET_SM_BUF                      5
+#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ                6
+#define TXRX_MGMTBUF_REAPED_BUF                      7
+#define TXRX_MGMTBUF_REAPED_SM_BUF                   8
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN              9
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN          10
+#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ                11
+#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ                12
+#define TXRX_MGMTBUF_PAUSE_TXQ                       13
+#define TXRX_MGMTBUF_RESUME_TXQ                      14
+#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT       15
+#define TXRX_MGMTBUF_DRAINQ                          16
+#define TXRX_MGMTBUF_INDICATE_Q_DRAINED              17
+#define TXRX_MGMTBUF_DBGID_DEFINITION_END
+
+/* PM (Power Module) debug identifier definitions */
+#define PM_DBGID_DEFINITION_START
+#define PM_INIT                                      1
+#define PM_ENABLE                                    2
+#define PM_SET_STATE                                 3
+#define PM_SET_POWERMODE                             4
+#define PM_CONN_NOTIFY                               5
+#define PM_REF_COUNT_NEGATIVE                        6
+#define PM_APSD_ENABLE                               7
+#define PM_UPDATE_APSD_STATE                         8
+#define PM_CHAN_OP_REQ                               9
+#define PM_SET_MY_BEACON_POLICY                      10
+#define PM_SET_ALL_BEACON_POLICY                     11
+#define PM_SET_PM_PARAMS1                            12
+#define PM_SET_PM_PARAMS2                            13
+#define PM_ADHOC_SET_PM_CAPS_FAIL                    14
+#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID              15
+#define PM_DBGID_DEFINITION_END
+
+/* Wake on Wireless debug identifier definitions */
+#define WOW_DBGID_DEFINITION_START
+#define WOW_INIT                                        1
+#define WOW_GET_CONFIG_DSET                             2
+#define WOW_NO_CONFIG_DSET                              3
+#define WOW_INVALID_CONFIG_DSET                         4
+#define WOW_USE_DEFAULT_CONFIG                          5
+#define WOW_SETUP_GPIO                                  6
+#define WOW_INIT_DONE                                   7
+#define WOW_SET_GPIO_PIN                                8
+#define WOW_CLEAR_GPIO_PIN                              9
+#define WOW_SET_WOW_MODE_CMD                            10
+#define WOW_SET_HOST_MODE_CMD                           11
+#define WOW_ADD_WOW_PATTERN_CMD                         12
+#define WOW_NEW_WOW_PATTERN_AT_INDEX                    13
+#define WOW_DEL_WOW_PATTERN_CMD                         14
+#define WOW_LIST_CONTAINS_PATTERNS                      15
+#define WOW_GET_WOW_LIST_CMD                            16
+#define WOW_INVALID_FILTER_ID                           17
+#define WOW_INVALID_FILTER_LISTID                       18
+#define WOW_NO_VALID_FILTER_AT_ID                       19
+#define WOW_NO_VALID_LIST_AT_ID                         20
+#define WOW_NUM_PATTERNS_EXCEEDED                       21
+#define WOW_NUM_LISTS_EXCEEDED                          22
+#define WOW_GET_WOW_STATS                               23
+#define WOW_CLEAR_WOW_STATS                             24
+#define WOW_WAKEUP_HOST                                 25
+#define WOW_EVENT_WAKEUP_HOST                           26
+#define WOW_EVENT_DISCARD                               27
+#define WOW_PATTERN_MATCH                               28
+#define WOW_PATTERN_NOT_MATCH                           29
+#define WOW_PATTERN_NOT_MATCH_OFFSET                    30
+#define WOW_DISABLED_HOST_ASLEEP                        31
+#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS             32
+#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND          33
+#define WOW_DBGID_DEFINITION_END
+
+/* WHAL debug identifier definitions */
+#define WHAL_DBGID_DEFINITION_START
+#define WHAL_ERROR_ANI_CONTROL                      1
+#define WHAL_ERROR_CHIP_TEST1                       2
+#define WHAL_ERROR_CHIP_TEST2                       3
+#define WHAL_ERROR_EEPROM_CHECKSUM                  4
+#define WHAL_ERROR_EEPROM_MACADDR                   5
+#define WHAL_ERROR_INTERRUPT_HIU                    6
+#define WHAL_ERROR_KEYCACHE_RESET                   7
+#define WHAL_ERROR_KEYCACHE_SET                     8
+#define WHAL_ERROR_KEYCACHE_TYPE                    9
+#define WHAL_ERROR_KEYCACHE_TKIPENTRY              10
+#define WHAL_ERROR_KEYCACHE_WEPLENGTH              11
+#define WHAL_ERROR_PHY_INVALID_CHANNEL             12
+#define WHAL_ERROR_POWER_AWAKE                     13
+#define WHAL_ERROR_POWER_SET                       14
+#define WHAL_ERROR_RECV_STOPDMA                    15
+#define WHAL_ERROR_RECV_STOPPCU                    16
+#define WHAL_ERROR_RESET_CHANNF1                   17
+#define WHAL_ERROR_RESET_CHANNF2                   18
+#define WHAL_ERROR_RESET_PM                        19
+#define WHAL_ERROR_RESET_OFFSETCAL                 20
+#define WHAL_ERROR_RESET_RFGRANT                   21
+#define WHAL_ERROR_RESET_RXFRAME                   22
+#define WHAL_ERROR_RESET_STOPDMA                   23
+#define WHAL_ERROR_RESET_RECOVER                   24
+#define WHAL_ERROR_XMIT_COMPUTE                    25
+#define WHAL_ERROR_XMIT_NOQUEUE                    26
+#define WHAL_ERROR_XMIT_ACTIVEQUEUE                27
+#define WHAL_ERROR_XMIT_BADTYPE                    28
+#define WHAL_DBGID_DEFINITION_END
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_ID_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dl_list.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dl_list.h
new file mode 100644
index 0000000..4b9c581
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dl_list.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * Double-link list definitions (adapted from Atheros SDIO stack)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifndef __DL_LIST_H___
+#define __DL_LIST_H___
+
+#define A_CONTAINING_STRUCT(address, struct_type, field_name)\
+            ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name)))
+
+/* list functions */
+/* pointers for the list */
+typedef struct _DL_LIST {
+    struct _DL_LIST *pPrev;
+    struct _DL_LIST *pNext;
+}DL_LIST, *PDL_LIST;
+/*
+ * DL_LIST_INIT , initialize doubly linked list
+*/
+#define DL_LIST_INIT(pList)\
+    {(pList)->pPrev = pList; (pList)->pNext = pList;}
+
+#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList)))
+#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext
+#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev
+/*
+ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member
+ * NOT: do not use this function if the items in the list are deleted inside the
+ * iteration loop
+*/
+#define ITERATE_OVER_LIST(pStart, pTemp) \
+    for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext)
+
+
+/* safe iterate macro that allows the item to be removed from the list
+ * the iteration continues to the next item in the list
+ */
+#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset)  \
+{                                                       \
+    PDL_LIST  pTemp;                                     \
+    pTemp = (pStart)->pNext;                            \
+    while (pTemp != (pStart)) {                         \
+        (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset);   \
+         pTemp = pTemp->pNext;                          \
+
+#define ITERATE_END }}
+
+/*
+ * DL_ListInsertTail - insert pAdd to the end of the list
+*/
+static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) {
+        /* insert at tail */
+    pAdd->pPrev = pList->pPrev;
+    pAdd->pNext = pList;
+    pList->pPrev->pNext = pAdd;
+    pList->pPrev = pAdd;
+    return pAdd;
+}
+
+/*
+ * DL_ListInsertHead - insert pAdd into the head of the list
+*/
+static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) {
+        /* insert at head */
+    pAdd->pPrev = pList;
+    pAdd->pNext = pList->pNext;
+    pList->pNext->pPrev = pAdd;
+    pList->pNext = pAdd;
+    return pAdd;
+}
+
+#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem))
+/*
+ * DL_ListRemove - remove pDel from list
+*/
+static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) {
+    pDel->pNext->pPrev = pDel->pPrev;
+    pDel->pPrev->pNext = pDel->pNext;
+        /* point back to itself just to be safe, incase remove is called again */
+    pDel->pNext = pDel;
+    pDel->pPrev = pDel;
+    return pDel;
+}
+
+/*
+ * DL_ListRemoveItemFromHead - get a list item from the head
+*/
+static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) {
+    PDL_LIST pItem = NULL;
+    if (pList->pNext != pList) {
+        pItem = pList->pNext;
+            /* remove the first item from head */
+        DL_ListRemove(pItem);
+    }
+    return pItem;
+}
+
+#endif /* __DL_LIST_H___ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_api.h
new file mode 100644
index 0000000..de5cc6a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_api.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $
+ *
+ * Host-side DataSet API.
+ *
+ */
+
+#ifndef _DSET_API_H_
+#define _DSET_API_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/*
+ * Host-side DataSet support is optional, and is not
+ * currently required for correct operation.  To disable
+ * Host-side DataSet support, set this to 0.
+ */
+#ifndef CONFIG_HOST_DSET_SUPPORT
+#define CONFIG_HOST_DSET_SUPPORT 1
+#endif
+
+/* Called to send a DataSet Open Reply back to the Target. */
+A_STATUS wmi_dset_open_reply(struct wmi_t *wmip,
+                             A_UINT32 status,
+                             A_UINT32 access_cookie,
+                             A_UINT32 size,
+                             A_UINT32 version,
+                             A_UINT32 targ_handle,
+                             A_UINT32 targ_reply_fn,
+                             A_UINT32 targ_reply_arg);
+
+/* Called to send a DataSet Data Reply back to the Target. */
+A_STATUS wmi_dset_data_reply(struct wmi_t *wmip,
+                             A_UINT32 status,
+                             A_UINT8 *host_buf,
+                             A_UINT32 length,
+                             A_UINT32 targ_buf,
+                             A_UINT32 targ_reply_fn,
+                             A_UINT32 targ_reply_arg);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+
+#endif /* _DSET_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_internal.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_internal.h
new file mode 100644
index 0000000..f0be380
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dset_internal.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSET_INTERNAL_H__
+#define __DSET_INTERNAL_H__
+
+/*
+ * Internal dset definitions, common for DataSet layer.
+ */
+
+#define DSET_TYPE_STANDARD      0
+#define DSET_TYPE_BPATCHED      1
+#define DSET_TYPE_COMPRESSED    2
+
+/* Dataset descriptor */
+
+typedef struct dset_descriptor_s {
+  struct dset_descriptor_s  *next;         /* List link. NULL only at the last
+                                              descriptor */
+  A_UINT16                   id;           /* Dset ID */
+  A_UINT16                   size;         /* Dset size. */
+  void                      *DataPtr;      /* Pointer to raw data for standard
+                                              DataSet or pointer to original
+                                              dset_descriptor for patched
+                                              DataSet */
+  A_UINT32                   data_type;    /* DSET_TYPE_*, above */
+
+  void                      *AuxPtr;       /* Additional data that might
+                                              needed for data_type. For
+                                              example, pointer to patch
+                                              Dataset descriptor for BPatch. */
+} dset_descriptor_t;
+
+#endif /* __DSET_INTERNAL_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dsetid.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dsetid.h
new file mode 100644
index 0000000..85729f8
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/dsetid.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSETID_H__
+#define __DSETID_H__
+
+/* Well-known DataSet IDs */
+#define DSETID_UNUSED                     0x00000000
+#define DSETID_BOARD_DATA                 0x00000001 /* Cal and board data */
+#define DSETID_REGDB                      0x00000002 /* Regulatory Database */
+#define DSETID_POWER_CONTROL              0x00000003 /* TX Pwr Lim & Ant Gain */
+#define DSETID_USER_CONFIG                0x00000004 /* User Configuration */
+
+#define DSETID_ANALOG_CONTROL_DATA_START  0x00000005
+#define DSETID_ANALOG_CONTROL_DATA_END    0x00000025
+/*
+ * Get DSETID for various reference clock speeds.
+ * For each speed there are three DataSets that correspond
+ * to the three columns of bank6 data (addr, 11a, 11b/g).
+ * This macro returns the dsetid of the first of those
+ * three DataSets.
+ */
+#define ANALOG_CONTROL_DATA_DSETID(refclk) \
+        (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
+
+/*
+ * There are TWO STARTUP_PATCH DataSets.
+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
+ * earlier systems.  On AR6002, it is applied after BMI, just like
+ * DSETID_STARTUP_PATCH2.
+ */
+#define DSETID_STARTUP_PATCH              0x00000026
+#define DSETID_GPIO_CONFIG_PATCH          0x00000027
+#define DSETID_WLANREGS                   0x00000028 /* override wlan regs */
+#define DSETID_STARTUP_PATCH2             0x00000029
+
+#define DSETID_WOW_CONFIG                 0x00000090 /* WoW Configuration */
+
+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
+#define DSETID_INI_DATA                   0x00000100
+/* Reserved for WHAL INI Tables: 0x100..0x11f */
+#define DSETID_INI_DATA_END               0x0000011f
+
+#define DSETID_VENDOR_START               0x00010000 /* Vendor-defined DataSets */
+
+#define DSETID_INDEX_END                  0xfffffffe /* Reserved to indicate the
+                                                        end of a memory-based
+                                                        DataSet Index */
+#define DSETID_INDEX_FREE                 0xffffffff /* An unused index entry */
+
+/*
+ * PATCH DataSet format:
+ * A list of patches, terminated by a patch with
+ * address=PATCH_END.
+ *
+ * This allows for patches to be stored in flash.
+ */
+struct patch_s {
+    A_UINT32 *address;
+    A_UINT32  data;
+};
+
+/*
+ * Skip some patches.  Can be used to erase a single patch in a
+ * patch DataSet without having to re-write the DataSet.  May
+ * also be used to embed information for use by subsequent
+ * patch code.  The "data" in a PATCH_SKIP tells how many
+ * bytes of length "patch_s" to skip.
+ */
+#define PATCH_SKIP      ((A_UINT32 *)0x00000000)
+
+/*
+ * Execute code at the address specified by "data".
+ * The address of the patch structure is passed as
+ * the one parameter.
+ */
+#define PATCH_CODE_ABS  ((A_UINT32 *)0x00000001)
+
+/*
+ * Same as PATCH_CODE_ABS, but treat "data" as an
+ * offset from the start of the patch word.
+ */
+#define PATCH_CODE_REL  ((A_UINT32 *)0x00000002)
+
+/* Mark the end of this patch DataSet. */
+#define PATCH_END       ((A_UINT32 *)0xffffffff)
+
+/*
+ * A DataSet which contains a Binary Patch to some other DataSet
+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
+ * Such a BPatch DataSet consists of BPatch metadata followed by
+ * the bdiff bytes.  BPatch metadata consists of a single 32-bit
+ * word that contains the size of the BPatched final image.
+ *
+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
+ * to create "diffs":
+ *  bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
+ * Then add BPatch metadata to the start of "diffs".
+ *
+ * NB: There are some implementation-induced restrictions
+ * on which DataSets can be BPatched.
+ */
+#define DSETID_BPATCH_FLAG                0x80000000
+
+#endif /* __DSETID_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio.h
new file mode 100644
index 0000000..2203c7e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#if defined(AR6001)
+#define GPIO_PIN_COUNT 18
+#else
+#define GPIO_PIN_COUNT 18
+#endif
+
+/*
+ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
+ * NB: These match hardware order, so that addresses can
+ * easily be computed.
+ */
+#define GPIO_ID_OUT             0x00000000
+#define GPIO_ID_OUT_W1TS        0x00000001
+#define GPIO_ID_OUT_W1TC        0x00000002
+#define GPIO_ID_ENABLE          0x00000003
+#define GPIO_ID_ENABLE_W1TS     0x00000004
+#define GPIO_ID_ENABLE_W1TC     0x00000005
+#define GPIO_ID_IN              0x00000006
+#define GPIO_ID_STATUS          0x00000007
+#define GPIO_ID_STATUS_W1TS     0x00000008
+#define GPIO_ID_STATUS_W1TC     0x00000009
+#define GPIO_ID_PIN0            0x0000000a
+#define GPIO_ID_PIN(n)          (GPIO_ID_PIN0+(n))
+
+#define GPIO_LAST_REGISTER_ID   GPIO_ID_PIN(17)
+#define GPIO_ID_NONE            0xffffffff
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio_api.h
new file mode 100644
index 0000000..8078aa5
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/gpio_api.h
@@ -0,0 +1,57 @@
+#ifndef _GPIO_API_H_
+#define _GPIO_API_H_
+/*
+ * Copyright 2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Host-side General Purpose I/O API.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $
+ */
+
+/*
+ * Send a command to the Target in order to change output on GPIO pins.
+ */
+A_STATUS wmi_gpio_output_set(struct wmi_t *wmip,
+                             A_UINT32 set_mask,
+                             A_UINT32 clear_mask,
+                             A_UINT32 enable_mask,
+                             A_UINT32 disable_mask);
+
+/*
+ * Send a command to the Target requesting input state of GPIO pins.
+ */
+A_STATUS wmi_gpio_input_get(struct wmi_t *wmip);
+
+/*
+ * Send a command to the Target to change the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_set(struct wmi_t *wmip,
+                               A_UINT32 gpioreg_id,
+                               A_UINT32 value);
+
+/*
+ * Send a command to the Target to fetch the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id);
+
+/*
+ * Send a command to the Target, acknowledging some GPIO interrupts.
+ */
+A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask);
+
+#endif /* _GPIO_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/hif.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/hif.h
new file mode 100644
index 0000000..846a69f
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/hif.h
@@ -0,0 +1,296 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * HIF specific declarations and prototypes
+ */
+
+#ifndef _HIF_H_
+#define _HIF_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+
+typedef struct htc_callbacks HTC_CALLBACKS;
+typedef struct hif_device HIF_DEVICE;
+
+/*
+ * direction - Direction of transfer (HIF_READ/HIF_WRITE).
+ */
+#define HIF_READ                    0x00000001
+#define HIF_WRITE                   0x00000002
+#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
+
+/*
+ *     type - An interface may support different kind of read/write commands.
+ *            The command type is divided into a basic and an extended command
+ *            and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO.
+ */
+#define HIF_BASIC_IO                0x00000004
+#define HIF_EXTENDED_IO             0x00000008
+#define HIF_TYPE_MASK               (HIF_BASIC_IO | HIF_EXTENDED_IO)
+
+/*
+ *     emode - This indicates the whether the command is to be executed in a
+ *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
+ *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
+ *             implemented using the asynchronous mode allowing the the bus
+ *             driver to indicate the completion of operation through the
+ *             registered callback routine. The requirement primarily comes
+ *             from the contexts these operations get called from (a driver's
+ *             transmit context or the ISR context in case of receive).
+ *             Support for both of these modes is essential.
+ */
+#define HIF_SYNCHRONOUS             0x00000010
+#define HIF_ASYNCHRONOUS            0x00000020
+#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
+
+/*
+ *     dmode - An interface may support different kinds of commands based on
+ *             the tradeoff between the amount of data it can carry and the
+ *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
+ *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
+ *             to the nearest block size by padding. The size of the block is
+ *             configurable at compile time using the HIF_BLOCK_SIZE and is
+ *             negotiated with the target during initialization after the
+ *             dragon interrupts are enabled.
+ */
+#define HIF_BYTE_BASIS              0x00000040
+#define HIF_BLOCK_BASIS             0x00000080
+#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
+
+/*
+ *     amode - This indicates if the address has to be incremented on dragon
+ *             after every read/write operation (HIF?FIXED_ADDRESS/
+ *             HIF_INCREMENTAL_ADDRESS).
+ */
+#define HIF_FIXED_ADDRESS           0x00000100
+#define HIF_INCREMENTAL_ADDRESS     0x00000200
+#define HIF_AMODE_MASK              (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_ASYNC_BYTE_FIX   \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_ASYNC_BYTE_INC   \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_ASYNC_BLOCK_INC  \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BYTE_FIX    \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_SYNC_BYTE_INC    \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BLOCK_INC  \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_INC    \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_FIX    \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_FIX   \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_FIX  \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_INC   \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_INC  \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BLOCK_INC  \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+
+typedef enum {
+    HIF_DEVICE_POWER_STATE = 0,
+    HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+    HIF_DEVICE_GET_MBOX_ADDR,
+    HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+    HIF_DEVICE_GET_IRQ_PROC_MODE,
+    HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+} HIF_DEVICE_CONFIG_OPCODE;
+
+/*
+ * HIF CONFIGURE definitions:
+ *
+ *   HIF_DEVICE_GET_MBOX_BLOCK_SIZE
+ *   input : none
+ *   output : array of 4 A_UINT32s
+ *   notes: block size is returned for each mailbox (4)
+ *
+ *   HIF_DEVICE_GET_MBOX_ADDR
+ *   input : none
+ *   output : array of 4 A_UINT32
+ *   notes: address is returned for each mailbox (4) in the array
+ *
+ *   HIF_DEVICE_GET_PENDING_EVENTS_FUNC
+ *   input : none
+ *   output: HIF_PENDING_EVENTS_FUNC function pointer
+ *   notes: this is optional for the HIF layer, if the request is
+ *          not handled then it indicates that the upper layer can use
+ *          the standard device methods to get pending events (IRQs, mailbox messages etc..)
+ *          otherwise it can call the function pointer to check pending events.
+ *
+ *   HIF_DEVICE_GET_IRQ_PROC_MODE
+ *   input : none
+ *   output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode)
+ *   note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF
+ *         layer can report whether IRQ processing is requires synchronous behavior or
+ *         can be processed using asynchronous bus requests (typically faster).
+ *
+ *   HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC
+ *   input :
+ *   output : HIF_MASK_UNMASK_RECV_EVENT function pointer
+ *   notes: this is optional for the HIF layer.  The HIF layer may require a special mechanism
+ *          to mask receive message events.  The upper layer can call this pointer when it needs
+ *          to mask/unmask receive events (in case it runs out of buffers).
+ *
+ *
+ */
+
+typedef enum {
+    HIF_DEVICE_IRQ_SYNC_ONLY,   /* for HIF implementations that require the DSR to process all
+                                   interrupts before returning */
+    HIF_DEVICE_IRQ_ASYNC_SYNC,  /* for HIF implementations that allow DSR to process interrupts
+                                   using ASYNC I/O (that is HIFAckInterrupt can be called at a
+                                   later time */
+} HIF_DEVICE_IRQ_PROCESSING_MODE;
+
+#define HIF_MAX_DEVICES                 1
+
+struct htc_callbacks {
+    A_UCHAR *name;
+    A_UINT32 id;
+    A_STATUS (* deviceInsertedHandler)(void *hif_handle);
+    A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status);
+    A_STATUS (* deviceSuspendHandler)(void *htc_handle);
+    A_STATUS (* deviceResumeHandler)(void *htc_handle);
+    A_STATUS (* deviceWakeupHandler)(void *htc_handle);
+    A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status);
+    A_STATUS (* dsrHandler)(void *htc_handle);
+};
+
+
+#define HIF_OTHER_EVENTS     (1 << 0)   /* other interrupts (non-Recv) are pending, host
+                                           needs to read the register table to figure out what */
+#define HIF_RECV_MSG_AVAIL   (1 << 1)   /* pending recv packet */
+
+typedef struct _HIF_PENDING_EVENTS_INFO {
+    A_UINT32 Events;
+    A_UINT32 LookAhead;
+} HIF_PENDING_EVENTS_INFO;
+
+    /* function to get pending events , some HIF modules use special mechanisms
+     * to detect packet available and other interrupts */
+typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE              *device,
+                                             HIF_PENDING_EVENTS_INFO *pEvents,
+                                             void                    *AsyncContext);
+
+#define HIF_MASK_RECV    TRUE
+#define HIF_UNMASK_RECV  FALSE
+    /* function to mask recv events */
+typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE  *device,
+                                                A_BOOL      Mask,
+                                                void        *AsyncContext);
+
+
+/*
+ * This API is used by the HTC layer to initialize the HIF layer and to
+ * register different callback routines. Support for following events has
+ * been captured - DSR, Read/Write completion, Device insertion/removal,
+ * Device suspension/resumption/wakeup. In addition to this, the API is
+ * also used to register the name and the revision of the chip. The latter
+ * can be used to verify the revision of the chip read from the device
+ * before reporting it to HTC.
+ */
+int HIFInit(HTC_CALLBACKS *callbacks);
+
+/*
+ * This API is used to provide the read/write interface over the specific bus
+ * interface.
+ * address - Starting address in the dragon's address space. For mailbox
+ *           writes, it refers to the start of the mbox boundary. It should
+ *           be ensured that the last byte falls on the mailbox's EOM. For
+ *           mailbox reads, it refers to the end of the mbox boundary.
+ * buffer - Pointer to the buffer containg the data to be transmitted or
+ *          received.
+ * length - Amount of data to be transmitted or received.
+ * request - Characterizes the attributes of the command.
+ */
+A_STATUS
+HIFReadWrite(HIF_DEVICE    *device,
+             A_UINT32       address,
+             A_UCHAR       *buffer,
+             A_UINT32       length,
+             A_UINT32       request,
+             void          *context);
+
+/*
+ * This can be initiated from the unload driver context ie when the HTCShutdown
+ * routine is called.
+ */
+void HIFShutDownDevice(HIF_DEVICE *device);
+
+/*
+ * This should translate to an acknowledgment to the bus driver indicating that
+ * the previous interrupt request has been serviced and the all the relevant
+ * sources have been cleared. HTC is ready to process more interrupts.
+ * This should prevent the bus driver from raising an interrupt unless the
+ * previous one has been serviced and acknowledged using the previous API.
+ */
+void HIFAckInterrupt(HIF_DEVICE *device);
+
+void HIFMaskInterrupt(HIF_DEVICE *device);
+
+void HIFUnMaskInterrupt(HIF_DEVICE *device);
+
+/*
+ * This set of functions are to be used by the bus driver to notify
+ * the HIF module about various events.
+ * These are not implemented if the bus driver provides an alternative
+ * way for this notification though callbacks for instance.
+ */
+int HIFInsertEventNotify(void);
+
+int HIFRemoveEventNotify(void);
+
+int HIFIRQEventNotify(void);
+
+int HIFRWCompleteEventNotify(void);
+
+/*
+ * This function associates a opaque handle with the HIF layer
+ * to be used in communication with upper layer i.e. HTC.
+ * This would normaly be a pointer to htc_target data structure.
+ */
+void HIFSetHandle(void *hif_handle, void *handle);
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+                   void *config, A_UINT32 configLen);
+
+
+struct device;
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HIF_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/host_version.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/host_version.h
new file mode 100644
index 0000000..c090115
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/host_version.h
@@ -0,0 +1,49 @@
+#ifndef _HOST_VERSION_H_
+#define _HOST_VERSION_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains version information for the sample host driver for the
+ * AR6000 chip
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <AR6K_version.h>
+
+/*
+ * The version number is made up of major, minor, patch and build
+ * numbers. These are 16 bit numbers.  The build and release script will
+ * set the build number using a Perforce counter.  Here the build number is
+ * set to 9999 so that builds done without the build-release script are easily
+ * identifiable.
+ */
+
+#define ATH_SW_VER_MAJOR      __VER_MAJOR_
+#define ATH_SW_VER_MINOR      __VER_MINOR_
+#define ATH_SW_VER_PATCH      __VER_PATCH_
+#define ATH_SW_VER_BUILD 9999
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_VERSION_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc.h
new file mode 100644
index 0000000..152d867
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+
+#ifndef __HTC_H__
+#define __HTC_H__
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field))
+
+#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \
+        (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)]))
+
+/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a
+ * structure using only the type and field name.
+ * Use these macros if there is the potential for unaligned buffer accesses. */
+#define A_GET_UINT16_FIELD(p,type,field) \
+    ASSEMBLE_UNALIGNED_UINT16(p,\
+                              A_OFFSETOF(type,field) + 1, \
+                              A_OFFSETOF(type,field))
+
+#define A_SET_UINT16_FIELD(p,type,field,value) \
+{                                              \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value);        \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \
+}
+
+#define A_GET_UINT8_FIELD(p,type,field) \
+            ((A_UINT8 *)(p))[A_OFFSETOF(type,field)]
+
+#define A_SET_UINT8_FIELD(p,type,field,value) \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value)
+
+/****** DANGER DANGER ***************
+ *
+ *   The frame header length and message formats defined herein were
+ *   selected to accommodate optimal alignment for target processing.  This reduces code
+ *   size and improves performance.
+ *
+ *   Any changes to the header length may alter the alignment and cause exceptions
+ *   on the target. When adding to the message structures insure that fields are
+ *   properly aligned.
+ *
+ */
+
+/* HTC frame header */
+typedef PREPACK struct _HTC_FRAME_HDR{
+        /* do not remove or re-arrange these fields, these are minimally required
+         * to take advantage of 4-byte lookaheads in some hardware implementations */
+    A_UINT8   EndpointID;
+    A_UINT8   Flags;
+    A_UINT16  PayloadLen;       /* length of data (including trailer) that follows the header */
+
+    /***** end of 4-byte lookahead ****/
+
+    A_UINT8   ControlBytes[2];
+
+    /* message payload starts after the header */
+
+} POSTPACK HTC_FRAME_HDR;
+
+/* frame header flags */
+#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0)
+#define HTC_FLAGS_RECV_TRAILER       (1 << 1)
+
+
+#define HTC_HDR_LENGTH  (sizeof(HTC_FRAME_HDR))
+#define HTC_MAX_TRAILER_LENGTH   255
+#define HTC_MAX_PAYLOAD_LENGTH   (2048 - sizeof(HTC_FRAME_HDR))
+
+/* HTC control message IDs */
+typedef enum {
+    HTC_MSG_READY_ID = 1,
+    HTC_MSG_CONNECT_SERVICE_ID = 2,
+    HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3,
+    HTC_MSG_SETUP_COMPLETE_ID = 4,
+} HTC_MSG_IDS;
+
+#define HTC_MAX_CONTROL_MESSAGE_LENGTH  256
+
+/* base message ID header */
+typedef PREPACK struct {
+    A_UINT16 MessageID;
+} POSTPACK HTC_UNKNOWN_MSG;
+
+/* HTC ready message
+ * direction : target-to-host  */
+typedef PREPACK struct {
+    A_UINT16  MessageID;    /* ID */
+    A_UINT16  CreditCount;  /* number of credits the target can offer */
+    A_UINT16  CreditSize;   /* size of each credit */
+    A_UINT8   MaxEndpoints; /* maximum number of endpoints the target has resources for */
+    A_UINT8   _Pad1;
+} POSTPACK HTC_READY_MSG;
+
+#define HTC_SERVICE_META_DATA_MAX_LENGTH 128
+
+/* connect service
+ * direction : host-to-target */
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    A_UINT16  ServiceID;           /* service ID of the service to connect to */
+    A_UINT16  ConnectionFlags;     /* connection flags */
+
+#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2)  /* reduce credit dribbling when
+                                                             the host needs credits */
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK             (0x3)
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH        0x0
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF          0x1
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS     0x2
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY             0x3
+
+    A_UINT8   ServiceMetaLength;   /* length of meta data that follows */
+    A_UINT8   _Pad1;
+
+    /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_MSG;
+
+/* connect response
+ * direction : target-to-host */
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    A_UINT16  ServiceID;            /* service ID that the connection request was made */
+    A_UINT8   Status;               /* service connection status */
+    A_UINT8   EndpointID;           /* assigned endpoint ID */
+    A_UINT16  MaxMsgSize;           /* maximum expected message size on this endpoint */
+    A_UINT8   ServiceMetaLength;    /* length of meta data that follows */
+    A_UINT8   _Pad1;
+
+    /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG;
+
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    /* currently, no other fields */
+} POSTPACK HTC_SETUP_COMPLETE_MSG;
+
+
+/* connect response status codes */
+#define HTC_SERVICE_SUCCESS      0  /* success */
+#define HTC_SERVICE_NOT_FOUND    1  /* service could not be found */
+#define HTC_SERVICE_FAILED       2  /* specific service failed the connect */
+#define HTC_SERVICE_NO_RESOURCES 3  /* no resources (i.e. no more endpoints) */
+#define HTC_SERVICE_NO_MORE_EP   4  /* specific service is not allowing any more
+                                       endpoints */
+
+/* report record IDs */
+typedef enum {
+    HTC_RECORD_NULL  = 0,
+    HTC_RECORD_CREDITS   = 1,
+    HTC_RECORD_LOOKAHEAD = 2,
+} HTC_RPT_IDS;
+
+typedef PREPACK struct {
+    A_UINT8 RecordID;     /* Record ID */
+    A_UINT8 Length;       /* Length of record */
+} POSTPACK HTC_RECORD_HDR;
+
+typedef PREPACK struct {
+    A_UINT8 EndpointID;     /* Endpoint that owns these credits */
+    A_UINT8 Credits;        /* credits to report since last report */
+} POSTPACK HTC_CREDIT_REPORT;
+
+typedef PREPACK struct {
+    A_UINT8 PreValid;         /* pre valid guard */
+    A_UINT8 LookAhead[4];     /* 4 byte lookahead */
+    A_UINT8 PostValid;        /* post valid guard */
+
+   /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes.
+    * The PreValid bytes must equal the inverse of the PostValid byte */
+
+} POSTPACK HTC_LOOKAHEAD_REPORT;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+
+#endif /* __HTC_H__ */
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_api.h
new file mode 100644
index 0000000..e75692d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_api.h
@@ -0,0 +1,439 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_API_H_
+#define _HTC_API_H_
+
+#include <htc.h>
+#include <htc_services.h>
+#include "htc_packet.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* TODO.. for BMI */
+#define ENDPOINT1 0
+// TODO -remove me, but we have to fix BMI first
+#define HTC_MAILBOX_NUM_MAX    4
+
+
+/* ------ Endpoint IDS ------ */
+typedef enum
+{
+    ENDPOINT_UNUSED = -1,
+    ENDPOINT_0 = 0,
+    ENDPOINT_1 = 1,
+    ENDPOINT_2 = 2,
+    ENDPOINT_3,
+    ENDPOINT_4,
+    ENDPOINT_5,
+    ENDPOINT_6,
+    ENDPOINT_7,
+    ENDPOINT_8,
+    ENDPOINT_MAX,
+} HTC_ENDPOINT_ID;
+
+/* this is the amount of header room required by users of HTC */
+#define HTC_HEADER_LEN         HTC_HDR_LENGTH
+
+typedef void *HTC_HANDLE;
+
+typedef A_UINT16 HTC_SERVICE_ID;
+
+typedef struct _HTC_INIT_INFO {
+    void   (*AddInstance)(HTC_HANDLE);
+    void   (*DeleteInstance)(void *Instance);
+    void   (*TargetFailure)(void *Instance, A_STATUS Status);
+} HTC_INIT_INFO;
+
+/* per service connection send completion */
+typedef void   (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *);
+/* per service connection pkt received */
+typedef void   (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *);
+
+/* Optional per service connection receive buffer re-fill callback,
+ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
+ * to the network stack.  The driver never gets the packets back from the OS.  For these OSes
+ * a refill callback can be used to allocate and re-queue buffers into HTC.
+ *
+ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and
+ * the driver can re-queue these buffers into HTC. In this regard a refill callback is
+ * unnecessary */
+typedef void   (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+/* Optional per service connection callback when a send queue is full. This can occur if the
+ * host continues queueing up TX packets faster than credits can arrive
+ * To prevent the host (on some Oses like Linux) from continuously queueing packets
+ * and consuming resources, this callback is provided so that that the host
+ * can disable TX in the subsystem (i.e. network stack)
+ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this
+ * closed loop mechanism will prevent the network stack from overunning the NIC */
+typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint);
+/* Optional per service connection callback when a send queue is available for receive new packet. */
+typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+typedef struct _HTC_EP_CALLBACKS {
+    void                     *pContext;     /* context for each callback */
+    HTC_EP_SEND_PKT_COMPLETE EpTxComplete;  /* tx completion callback for connected endpoint */
+    HTC_EP_RECV_PKT          EpRecv;        /* receive callback for connected endpoint */
+    HTC_EP_RECV_REFILL       EpRecvRefill;  /* OPTIONAL receive re-fill callback for connected endpoint */
+    HTC_EP_SEND_QUEUE_FULL   EpSendFull;    /* OPTIONAL send full callback */
+    HTC_EP_SEND_QUEUE_AVAIL  EpSendAvail;    /* OPTIONAL send available callback */
+} HTC_EP_CALLBACKS;
+
+/* service connection information */
+typedef struct _HTC_SERVICE_CONNECT_REQ {
+    HTC_SERVICE_ID   ServiceID;                 /* service ID to connect to */
+    A_UINT16         ConnectionFlags;           /* connection flags, see htc protocol definition */
+    A_UINT8         *pMetaData;                 /* ptr to optional service-specific meta-data */
+    A_UINT8          MetaDataLength;            /* optional meta data length */
+    HTC_EP_CALLBACKS EpCallbacks;               /* endpoint callbacks */
+    int              MaxSendQueueDepth;         /* maximum depth of any send queue */
+} HTC_SERVICE_CONNECT_REQ;
+
+/* service connection response information */
+typedef struct _HTC_SERVICE_CONNECT_RESP {
+    A_UINT8     *pMetaData;             /* caller supplied buffer to optional meta-data */
+    A_UINT8     BufferLength;           /* length of caller supplied buffer */
+    A_UINT8     ActualLength;           /* actual length of meta data */
+    HTC_ENDPOINT_ID Endpoint;           /* endpoint to communicate over */
+    int         MaxMsgLength;           /* max length of all messages over this endpoint */
+    A_UINT8     ConnectRespCode;        /* connect response code from target */
+} HTC_SERVICE_CONNECT_RESP;
+
+/* endpoint distribution structure */
+typedef struct _HTC_ENDPOINT_CREDIT_DIST {
+    struct _HTC_ENDPOINT_CREDIT_DIST *pNext;
+    struct _HTC_ENDPOINT_CREDIT_DIST *pPrev;
+    HTC_SERVICE_ID      ServiceID;          /* Service ID (set by HTC) */
+    HTC_ENDPOINT_ID     Endpoint;           /* endpoint for this distribution struct (set by HTC) */
+    A_UINT32            DistFlags;          /* distribution flags, distribution function can
+                                               set default activity using SET_EP_ACTIVE() macro */
+    int                 TxCreditsNorm;      /* credits for normal operation, anything above this
+                                               indicates the endpoint is over-subscribed, this field
+                                               is only relevant to the credit distribution function */
+    int                 TxCreditsMin;       /* floor for credit distribution, this field is
+                                               only relevant to the credit distribution function */
+    int                 TxCreditsAssigned;  /* number of credits assigned to this EP, this field
+                                               is only relevant to the credit dist function */
+    int                 TxCredits;          /* current credits available, this field is used by
+                                               HTC to determine whether a message can be sent or
+                                               must be queued */
+    int                 TxCreditsToDist;    /* pending credits to distribute on this endpoint, this
+                                               is set by HTC when credit reports arrive.
+                                               The credit distribution functions sets this to zero
+                                               when it distributes the credits */
+    int                 TxCreditsSeek;      /* this is the number of credits that the current pending TX
+                                               packet needs to transmit.  This is set by HTC when
+                                               and endpoint needs credits in order to transmit */
+    int                 TxCreditSize;       /* size in bytes of each credit (set by HTC) */
+    int                 TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */
+    void                *pHTCReserved;      /* reserved for HTC use */
+} HTC_ENDPOINT_CREDIT_DIST;
+
+#define HTC_EP_ACTIVE                            (1 << 31)
+
+/* macro to check if an endpoint has gone active, useful for credit
+ * distributions */
+#define IS_EP_ACTIVE(epDist)  ((epDist)->DistFlags & HTC_EP_ACTIVE)
+#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE
+
+    /* credit distibution code that is passed into the distrbution function,
+     * there are mandatory and optional codes that must be handled */
+typedef enum _HTC_CREDIT_DIST_REASON {
+    HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
+                                              send operations (MANDATORY) resulting in credit reports */
+    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
+    HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
+    HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
+                                              the distribution function */
+} HTC_CREDIT_DIST_REASON;
+
+typedef void (*HTC_CREDIT_DIST_CALLBACK)(void                     *Context,
+                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                         HTC_CREDIT_DIST_REASON   Reason);
+
+typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context,
+                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                         int                      TotalCredits);
+
+    /* endpoint statistics action */
+typedef enum _HTC_ENDPOINT_STAT_ACTION {
+    HTC_EP_STAT_SAMPLE = 0,                /* only read statistics */
+    HTC_EP_STAT_SAMPLE_AND_CLEAR = 1,      /* sample and immediately clear statistics */
+    HTC_EP_STAT_CLEAR                      /* clear only */
+} HTC_ENDPOINT_STAT_ACTION;
+
+    /* endpoint statistics */
+typedef struct _HTC_ENDPOINT_STATS {
+    A_UINT32  TxCreditLowIndications;  /* number of times the host set the credit-low flag in a send message on
+                                        this endpoint */
+    A_UINT32  TxIssued;               /* running count of TX packets issued */
+    A_UINT32  TxCreditRpts;           /* running count of total credit reports received for this endpoint */
+    A_UINT32  TxCreditRptsFromRx;
+    A_UINT32  TxCreditRptsFromOther;
+    A_UINT32  TxCreditRptsFromEp0;
+    A_UINT32  TxCreditsFromRx;        /* count of credits received via Rx packets on this endpoint */
+    A_UINT32  TxCreditsFromOther;     /* count of credits received via another endpoint */
+    A_UINT32  TxCreditsFromEp0;       /* count of credits received via another endpoint */
+    A_UINT32  TxCreditsConsummed;     /* count of consummed credits */
+    A_UINT32  TxCreditsReturned;      /* count of credits returned */
+    A_UINT32  RxReceived;             /* count of RX packets received */
+    A_UINT32  RxLookAheads;           /* count of lookahead records
+                                         found in messages received on this endpoint */
+} HTC_ENDPOINT_STATS;
+
+/* ------ Function Prototypes ------ */
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Initialize HTC
+  @function name: HTCInit
+  @input:  pInfo - initialization information
+  @output:
+  @return: A_OK on success
+  @notes: The caller initializes global HTC state and registers various instance
+          notification callbacks (see HTC_INIT_INFO).
+
+  @example:
+  @see also: HTCShutdown
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCInit(HTC_INIT_INFO *pInfo);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Get the underlying HIF device handle
+  @function name: HTCGetHifDevice
+  @input:  HTCHandle - handle passed into the AddInstance callback
+  @output:
+  @return: opaque HIF device handle usable in HIF API calls.
+  @notes:
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void       *HTCGetHifDevice(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Set the associated instance for the HTC handle
+  @function name: HTCSetInstance
+  @input:  HTCHandle - handle passed into the AddInstance callback
+           Instance - caller supplied instance object
+  @output:
+  @return:
+  @notes:  Caller must set the instance information for the HTC handle in order to receive
+           notifications for instance deletion (DeleteInstance callback is called) and for target
+           failure notification.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Set credit distribution parameters
+  @function name: HTCSetCreditDistribution
+  @input:  HTCHandle - HTC handle
+           pCreditDistCont - caller supplied context to pass into distribution functions
+           CreditDistFunc - Distribution function callback
+           CreditDistInit - Credit Distribution initialization callback
+           ServicePriorityOrder - Array containing list of service IDs, lowest index is highest
+                                  priority
+           ListLength - number of elements in ServicePriorityOrder
+  @output:
+  @return:
+  @notes:  The user can set a custom credit distribution function to handle special requirements
+           for each endpoint.  A default credit distribution routine can be used by setting
+           CreditInitFunc to NULL.  The default credit distribution is only provided for simple
+           "fair" credit distribution without regard to any prioritization.
+
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
+                                     void                     *pCreditDistContext,
+                                     HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+                                     HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+                                     HTC_SERVICE_ID           ServicePriorityOrder[],
+                                     int                      ListLength);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Wait for the target to indicate the HTC layer is ready
+  @function name: HTCWaitTarget
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes:  This API blocks until the target responds with an HTC ready message.
+           The caller should not connect services until the target has indicated it is
+           ready.
+  @example:
+  @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCWaitTarget(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Start target service communications
+  @function name: HTCStart
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes: This API indicates to the target that the service connection phase is complete
+          and the target can freely start all connected services.  This API should only be
+          called AFTER all service connections have been made.  TCStart will issue a
+          SETUP_COMPLETE message to the target to indicate that all service connections
+          have been made and the target can start communicating over the endpoints.
+  @example:
+  @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCStart(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Add receive packet to HTC
+  @function name: HTCAddReceivePkt
+  @input:  HTCHandle - HTC handle
+           pPacket - HTC receive packet to add
+  @output:
+  @return: A_OK on success
+  @notes:  user must supply HTC packets for capturing incomming HTC frames.  The caller
+           must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
+           macro.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Connect to an HTC service
+  @function name: HTCConnectService
+  @input:  HTCHandle - HTC handle
+           pReq - connection details
+  @output: pResp - connection response
+  @return:
+  @notes:  Service connections must be performed before HTCStart.  User provides callback handlers
+           for various endpoint events.
+  @example:
+  @see also: HTCStart
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCConnectService(HTC_HANDLE HTCHandle,
+                              HTC_SERVICE_CONNECT_REQ  *pReq,
+                              HTC_SERVICE_CONNECT_RESP *pResp);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Send an HTC packet
+  @function name: HTCSendPkt
+  @input:  HTCHandle - HTC handle
+           pPacket - packet to send
+  @output:
+  @return: A_OK
+  @notes:  Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro.
+           This interface is fully asynchronous.  On error, HTC SendPkt will
+           call the registered Endpoint callback to cleanup the packet.
+  @example:
+  @see also: HTCFlushEndpoint
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Stop HTC service communications
+  @function name: HTCStop
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes: HTC communications is halted.  All receive and pending TX packets will
+          be flushed.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCStop(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Shutdown HTC
+  @function name: HTCShutdown
+  @input:
+  @output:
+  @return:
+  @notes:  This cleans up all resources allocated by HTCInit().
+  @example:
+  @see also: HTCInit
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCShutDown(void);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Flush pending TX packets
+  @function name: HTCFlushEndpoint
+  @input:  HTCHandle - HTC handle
+           Endpoint - Endpoint to flush
+           Tag - flush tag
+  @output:
+  @return:
+  @notes:  The Tag parameter is used to selectively flush packets with matching tags.
+           The value of 0 forces all packets to be flush regardless of tag.
+  @example:
+  @see also: HTCSendPkt
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Dump credit distribution state
+  @function name: HTCDumpCreditStates
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes:  This dumps all credit distribution information to the debugger
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCDumpCreditStates(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Indicate a traffic activity change on an endpoint
+  @function name: HTCIndicateActivityChange
+  @input:  HTCHandle - HTC handle
+           Endpoint - endpoint in which activity has changed
+           Active - TRUE if active, FALSE if it has become inactive
+  @output:
+  @return:
+  @notes:  This triggers the registered credit distribution function to
+           re-adjust credits for active/inactive endpoints.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
+                                      HTC_ENDPOINT_ID Endpoint,
+                                      A_BOOL          Active);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Get endpoint statistics
+  @function name: HTCGetEndpointStatistics
+  @input:  HTCHandle - HTC handle
+           Endpoint - Endpoint identifier
+           Action - action to take with statistics
+  @output:
+           pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR)
+
+  @return: TRUE if statistics profiling is enabled, otherwise FALSE.
+
+  @notes:  Statistics is a compile-time option and this function may return FALSE
+           if HTC is not compiled with profiling.
+
+           The caller can specify the statistic "action" to take when sampling
+           the statistics.  This includes:
+
+           HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values.
+           HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics
+                             are cleared.
+           HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for
+                   pStats
+
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_BOOL       HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
+                                      HTC_ENDPOINT_ID          Endpoint,
+                                      HTC_ENDPOINT_STAT_ACTION Action,
+                                      HTC_ENDPOINT_STATS       *pStats);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_packet.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_packet.h
new file mode 100644
index 0000000..9ce8718
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_packet.h
@@ -0,0 +1,138 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef HTC_PACKET_H_
+#define HTC_PACKET_H_
+
+
+#include "dl_list.h"
+
+struct _HTC_PACKET;
+
+typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *);
+
+typedef A_UINT16 HTC_TX_TAG;
+
+typedef struct _HTC_TX_PACKET_INFO {
+    HTC_TX_TAG    Tag;            /* tag used to selective flush packets */
+} HTC_TX_PACKET_INFO;
+
+#define HTC_TX_PACKET_TAG_ALL          0    /* a tag of zero is reserved and used to flush ALL packets */
+#define HTC_TX_PACKET_TAG_INTERNAL     1                                /* internal tags start here */
+#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */
+
+typedef struct _HTC_RX_PACKET_INFO {
+    A_UINT32    Unused;          /* for future use and to make compilers happy */
+} HTC_RX_PACKET_INFO;
+
+/* wrapper around endpoint-specific packets */
+typedef struct _HTC_PACKET {
+    DL_LIST         ListLink;       /* double link */
+    void            *pPktContext;   /* caller's per packet specific context */
+
+    A_UINT8         *pBufferStart;  /* the true buffer start , the caller can
+                                       store the real buffer start here.  In
+                                       receive callbacks, the HTC layer sets pBuffer
+                                       to the start of the payload past the header. This
+                                       field allows the caller to reset pBuffer when it
+                                       recycles receive packets back to HTC */
+    /*
+     * Pointer to the start of the buffer. In the transmit
+     * direction this points to the start of the payload. In the
+     * receive direction, however, the buffer when queued up
+     * points to the start of the HTC header but when returned
+     * to the caller points to the start of the payload
+     */
+    A_UINT8         *pBuffer;       /* payload start (RX/TX) */
+    A_UINT32        BufferLength;   /* length of buffer */
+    A_UINT32        ActualLength;   /* actual length of payload */
+    int             Endpoint;       /* endpoint that this packet was sent/recv'd from */
+    A_STATUS        Status;         /* completion status */
+    union {
+        HTC_TX_PACKET_INFO  AsTx;   /* Tx Packet specific info */
+        HTC_RX_PACKET_INFO  AsRx;   /* Rx Packet specific info */
+    } PktInfo;
+
+    /* the following fields are for internal HTC use */
+    HTC_PACKET_COMPLETION Completion;   /* completion */
+    void                  *pContext;    /* HTC private completion context */
+    A_UINT32              HTCReserved;  /* reserved */
+} HTC_PACKET;
+
+
+
+#define COMPLETE_HTC_PACKET(p,status)        \
+{                                            \
+    (p)->Status = (status);                  \
+    (p)->Completion((p)->pContext,(p));      \
+}
+
+#define INIT_HTC_PACKET_INFO(p,b,len)             \
+{                                                 \
+    (p)->pBufferStart = (b);                      \
+    (p)->BufferLength = (len);                    \
+}
+
+/* macro to set an initial RX packet for refilling HTC */
+#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \
+{                                                 \
+    (p)->pPktContext = (c);                       \
+    (p)->pBuffer = (b);                           \
+    (p)->pBufferStart = (b);                      \
+    (p)->BufferLength = (len);                    \
+    (p)->Endpoint = (ep);                         \
+}
+
+/* fast macro to recycle an RX packet that will be re-queued to HTC */
+#define HTC_PACKET_RESET_RX(p)              \
+    (p)->pBuffer = (p)->pBufferStart
+
+/* macro to set packet parameters for TX */
+#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag)  \
+{                                                 \
+    (p)->pPktContext = (c);                       \
+    (p)->pBuffer = (b);                           \
+    (p)->ActualLength = (len);                    \
+    (p)->Endpoint = (ep);                         \
+    (p)->PktInfo.AsTx.Tag = (tag);                \
+}
+
+/* HTC Packet Queueing Macros */
+typedef DL_LIST HTC_PACKET_QUEUE;
+/* initialize queue */
+#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ))
+/* enqueue HTC packet to the tail of the queue */
+#define HTC_PACKET_ENQUEUE(pQ,p)  DL_ListInsertTail((pQ),&(p)->ListLink)
+/* test if a queue is empty */
+#define HTC_QUEUE_EMPTY(pQ)       DL_LIST_IS_EMPTY((pQ))
+/* get packet at head without removing it */
+#define HTC_GET_PKT_AT_HEAD(pQ)   A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink);
+/* remove a packet from the current list it is linked to */
+#define HTC_PACKET_REMOVE(p)      DL_ListRemove(&(p)->ListLink)
+
+/* dequeue an HTC packet from the head of the queue */
+static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) {
+    DL_LIST    *pItem = DL_ListRemoveItemFromHead(queue);
+    if (pItem != NULL) {
+        return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink);
+    }
+    return NULL;
+}
+
+#endif /*HTC_PACKET_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_services.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_services.h
new file mode 100644
index 0000000..fc6fc29
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/htc_services.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __HTC_SERVICES_H__
+#define __HTC_SERVICES_H__
+
+/* Current service IDs */
+
+typedef enum {
+    RSVD_SERVICE_GROUP  = 0,
+    WMI_SERVICE_GROUP   = 1,
+
+    HTC_TEST_GROUP = 254,
+    HTC_SERVICE_GROUP_LAST = 255
+}HTC_SERVICE_GROUP_IDS;
+
+#define MAKE_SERVICE_ID(group,index) \
+            (int)(((int)group << 8) | (int)(index))
+
+/* NOTE: service ID of 0x0000 is reserved and should never be used */
+#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1)
+#define WMI_CONTROL_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0)
+#define WMI_DATA_BE_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1)
+#define WMI_DATA_BK_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2)
+#define WMI_DATA_VI_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3)
+#define WMI_DATA_VO_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4)
+#define WMI_MAX_SERVICES  5
+
+/* raw stream service (i.e. flash, tcmd, calibration apps) */
+#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0)
+
+#endif /*HTC_SERVICES_H_*/
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211.h
new file mode 100644
index 0000000..7090040
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211.h
@@ -0,0 +1,342 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _NET80211_IEEE80211_H_
+#define _NET80211_IEEE80211_H_
+
+#include "athstartpack.h"
+
+/*
+ * 802.11 protocol definitions.
+ */
+
+#define IEEE80211_ADDR_LEN  6       /* size of 802.11 address */
+/* is 802.11 address multicast/broadcast? */
+#define IEEE80211_IS_MULTICAST(_a)  (*(_a) & 0x01)
+#define IEEE80211_ADDR_EQ(addr1, addr2)     \
+    (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0)
+
+#define IEEE80211_KEYBUF_SIZE 16
+#define IEEE80211_MICBUF_SIZE (8+8)  /* space for both tx and rx */
+
+/*
+ * NB: these values are ordered carefully; there are lots of
+ * of implications in any reordering.  In particular beware
+ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
+ */
+#define IEEE80211_CIPHER_WEP            0
+#define IEEE80211_CIPHER_TKIP           1
+#define IEEE80211_CIPHER_AES_OCB        2
+#define IEEE80211_CIPHER_AES_CCM        3
+#define IEEE80211_CIPHER_CKIP           5
+#define IEEE80211_CIPHER_CCKM_KRK       6
+#define IEEE80211_CIPHER_NONE           7       /* pseudo value */
+
+#define IEEE80211_CIPHER_MAX            (IEEE80211_CIPHER_NONE+1)
+
+#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \
+        (((len) == 5) || ((len) == 13) || ((len) == 16))
+
+
+
+/*
+ * generic definitions for IEEE 802.11 frames
+ */
+PREPACK struct ieee80211_frame {
+    A_UINT8    i_fc[2];
+    A_UINT8    i_dur[2];
+    A_UINT8    i_addr1[IEEE80211_ADDR_LEN];
+    A_UINT8    i_addr2[IEEE80211_ADDR_LEN];
+    A_UINT8    i_addr3[IEEE80211_ADDR_LEN];
+    A_UINT8    i_seq[2];
+    /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
+    /* see below */
+} POSTPACK;
+
+#define IEEE80211_FC0_VERSION_MASK          0x03
+#define IEEE80211_FC0_VERSION_SHIFT         0
+#define IEEE80211_FC0_VERSION_0             0x00
+#define IEEE80211_FC0_TYPE_MASK             0x0c
+#define IEEE80211_FC0_TYPE_SHIFT            2
+#define IEEE80211_FC0_TYPE_MGT              0x00
+#define IEEE80211_FC0_TYPE_CTL              0x04
+#define IEEE80211_FC0_TYPE_DATA             0x08
+
+#define IEEE80211_FC0_SUBTYPE_MASK          0xf0
+#define IEEE80211_FC0_SUBTYPE_SHIFT         4
+/* for TYPE_MGT */
+#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ     0x00
+#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP    0x10
+#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ   0x20
+#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP  0x30
+#define IEEE80211_FC0_SUBTYPE_PROBE_REQ     0x40
+#define IEEE80211_FC0_SUBTYPE_PROBE_RESP    0x50
+#define IEEE80211_FC0_SUBTYPE_BEACON        0x80
+#define IEEE80211_FC0_SUBTYPE_ATIM          0x90
+#define IEEE80211_FC0_SUBTYPE_DISASSOC      0xa0
+#define IEEE80211_FC0_SUBTYPE_AUTH          0xb0
+#define IEEE80211_FC0_SUBTYPE_DEAUTH        0xc0
+/* for TYPE_CTL */
+#define IEEE80211_FC0_SUBTYPE_PS_POLL       0xa0
+#define IEEE80211_FC0_SUBTYPE_RTS           0xb0
+#define IEEE80211_FC0_SUBTYPE_CTS           0xc0
+#define IEEE80211_FC0_SUBTYPE_ACK           0xd0
+#define IEEE80211_FC0_SUBTYPE_CF_END        0xe0
+#define IEEE80211_FC0_SUBTYPE_CF_END_ACK    0xf0
+/* for TYPE_DATA (bit combination) */
+#define IEEE80211_FC0_SUBTYPE_DATA          0x00
+#define IEEE80211_FC0_SUBTYPE_CF_ACK        0x10
+#define IEEE80211_FC0_SUBTYPE_CF_POLL       0x20
+#define IEEE80211_FC0_SUBTYPE_CF_ACPL       0x30
+#define IEEE80211_FC0_SUBTYPE_NODATA        0x40
+#define IEEE80211_FC0_SUBTYPE_CFACK         0x50
+#define IEEE80211_FC0_SUBTYPE_CFPOLL        0x60
+#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
+#define IEEE80211_FC0_SUBTYPE_QOS           0x80
+#define IEEE80211_FC0_SUBTYPE_QOS_NULL      0xc0
+
+#define IEEE80211_FC1_DIR_MASK              0x03
+#define IEEE80211_FC1_DIR_NODS              0x00    /* STA->STA */
+#define IEEE80211_FC1_DIR_TODS              0x01    /* STA->AP  */
+#define IEEE80211_FC1_DIR_FROMDS            0x02    /* AP ->STA */
+#define IEEE80211_FC1_DIR_DSTODS            0x03    /* AP ->AP  */
+
+#define IEEE80211_FC1_MORE_FRAG             0x04
+#define IEEE80211_FC1_RETRY                 0x08
+#define IEEE80211_FC1_PWR_MGT               0x10
+#define IEEE80211_FC1_MORE_DATA             0x20
+#define IEEE80211_FC1_WEP                   0x40
+#define IEEE80211_FC1_ORDER                 0x80
+
+#define IEEE80211_SEQ_FRAG_MASK             0x000f
+#define IEEE80211_SEQ_FRAG_SHIFT            0
+#define IEEE80211_SEQ_SEQ_MASK              0xfff0
+#define IEEE80211_SEQ_SEQ_SHIFT             4
+
+#define IEEE80211_NWID_LEN                  32
+
+/*
+ * 802.11 rate set.
+ */
+#define IEEE80211_RATE_SIZE     8       /* 802.11 standard */
+#define IEEE80211_RATE_MAXSIZE  15      /* max rates we'll handle */
+
+#define WMM_NUM_AC                  4   /* 4 AC categories */
+
+#define WMM_PARAM_ACI_M         0x60    /* Mask for ACI field */
+#define WMM_PARAM_ACI_S         5   /* Shift for ACI field */
+#define WMM_PARAM_ACM_M         0x10    /* Mask for ACM bit */
+#define WMM_PARAM_ACM_S         4       /* Shift for ACM bit */
+#define WMM_PARAM_AIFSN_M       0x0f    /* Mask for aifsn field */
+#define WMM_PARAM_LOGCWMIN_M    0x0f    /* Mask for CwMin field (in log) */
+#define WMM_PARAM_LOGCWMAX_M    0xf0    /* Mask for CwMax field (in log) */
+#define WMM_PARAM_LOGCWMAX_S    4   /* Shift for CwMax field */
+
+#define WMM_AC_TO_TID(_ac) (       \
+    ((_ac) == WMM_AC_VO) ? 6 : \
+    ((_ac) == WMM_AC_VI) ? 5 : \
+    ((_ac) == WMM_AC_BK) ? 1 : \
+    0)
+
+#define TID_TO_WMM_AC(_tid) (      \
+    ((_tid) < 1) ? WMM_AC_BE : \
+    ((_tid) < 3) ? WMM_AC_BK : \
+    ((_tid) < 6) ? WMM_AC_VI : \
+    WMM_AC_VO)
+/*
+ * Management information element payloads.
+ */
+
+enum {
+    IEEE80211_ELEMID_SSID       = 0,
+    IEEE80211_ELEMID_RATES      = 1,
+    IEEE80211_ELEMID_FHPARMS    = 2,
+    IEEE80211_ELEMID_DSPARMS    = 3,
+    IEEE80211_ELEMID_CFPARMS    = 4,
+    IEEE80211_ELEMID_TIM        = 5,
+    IEEE80211_ELEMID_IBSSPARMS  = 6,
+    IEEE80211_ELEMID_COUNTRY    = 7,
+    IEEE80211_ELEMID_CHALLENGE  = 16,
+    /* 17-31 reserved for challenge text extension */
+    IEEE80211_ELEMID_PWRCNSTR   = 32,
+    IEEE80211_ELEMID_PWRCAP     = 33,
+    IEEE80211_ELEMID_TPCREQ     = 34,
+    IEEE80211_ELEMID_TPCREP     = 35,
+    IEEE80211_ELEMID_SUPPCHAN   = 36,
+    IEEE80211_ELEMID_CHANSWITCH = 37,
+    IEEE80211_ELEMID_MEASREQ    = 38,
+    IEEE80211_ELEMID_MEASREP    = 39,
+    IEEE80211_ELEMID_QUIET      = 40,
+    IEEE80211_ELEMID_IBSSDFS    = 41,
+    IEEE80211_ELEMID_ERP        = 42,
+    IEEE80211_ELEMID_RSN        = 48,
+    IEEE80211_ELEMID_XRATES     = 50,
+    IEEE80211_ELEMID_TPC        = 150,
+    IEEE80211_ELEMID_CCKM       = 156,
+    IEEE80211_ELEMID_VENDOR     = 221,  /* vendor private */
+};
+
+#define ATH_OUI             0x7f0300        /* Atheros OUI */
+#define ATH_OUI_TYPE        0x01
+#define ATH_OUI_SUBTYPE     0x01
+#define ATH_OUI_VERSION     0x00
+
+#define WPA_OUI             0xf25000
+#define WPA_OUI_TYPE        0x01
+#define WPA_VERSION         1          /* current supported version */
+
+#define WPA_CSE_NULL        0x00
+#define WPA_CSE_WEP40       0x01
+#define WPA_CSE_TKIP        0x02
+#define WPA_CSE_CCMP        0x04
+#define WPA_CSE_WEP104      0x05
+
+#define WPA_ASE_NONE        0x00
+#define WPA_ASE_8021X_UNSPEC    0x01
+#define WPA_ASE_8021X_PSK   0x02
+
+#define RSN_OUI         0xac0f00
+#define RSN_VERSION     1       /* current supported version */
+
+#define RSN_CSE_NULL        0x00
+#define RSN_CSE_WEP40       0x01
+#define RSN_CSE_TKIP        0x02
+#define RSN_CSE_WRAP        0x03
+#define RSN_CSE_CCMP        0x04
+#define RSN_CSE_WEP104      0x05
+
+#define RSN_ASE_NONE        0x00
+#define RSN_ASE_8021X_UNSPEC    0x01
+#define RSN_ASE_8021X_PSK   0x02
+
+#define RSN_CAP_PREAUTH     0x01
+
+#define WMM_OUI         0xf25000
+#define WMM_OUI_TYPE        0x02
+#define WMM_INFO_OUI_SUBTYPE    0x00
+#define WMM_PARAM_OUI_SUBTYPE   0x01
+#define WMM_VERSION     1
+
+/* WMM stream classes */
+#define WMM_NUM_AC  4
+#define WMM_AC_BE   0       /* best effort */
+#define WMM_AC_BK   1       /* background */
+#define WMM_AC_VI   2       /* video */
+#define WMM_AC_VO   3       /* voice */
+
+/* TSPEC related */
+#define ACTION_CATEGORY_CODE_TSPEC                 17
+#define ACTION_CODE_TSPEC_ADDTS                    0
+#define ACTION_CODE_TSPEC_ADDTS_RESP               1
+#define ACTION_CODE_TSPEC_DELTS                    2
+
+typedef enum {
+    TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0,
+    TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1,
+    TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3,
+    TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8,
+    TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9,
+    TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA,
+    TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB,
+    TSPEC_STATUS_CODE_DELTS_SENT    = 0x30,
+    TSPEC_STATUS_CODE_DELTS_RECV    = 0x31,
+} TSPEC_STATUS_CODE;
+
+/*
+ * WMM/802.11e Tspec Element
+ */
+typedef PREPACK struct wmm_tspec_ie_t {
+    A_UINT8     elementId;
+    A_UINT8     len;
+    A_UINT8     oui[3];
+    A_UINT8     ouiType;
+    A_UINT8     ouiSubType;
+    A_UINT8     version;
+    A_UINT16    tsInfo_info;
+    A_UINT8     tsInfo_reserved;
+    A_UINT16    nominalMSDU;
+    A_UINT16    maxMSDU;
+    A_UINT32    minServiceInt;
+    A_UINT32    maxServiceInt;
+    A_UINT32    inactivityInt;
+    A_UINT32    suspensionInt;
+    A_UINT32    serviceStartTime;
+    A_UINT32    minDataRate;
+    A_UINT32    meanDataRate;
+    A_UINT32    peakDataRate;
+    A_UINT32    maxBurstSize;
+    A_UINT32    delayBound;
+    A_UINT32    minPhyRate;
+    A_UINT16    sba;
+    A_UINT16    mediumTime;
+} POSTPACK WMM_TSPEC_IE;
+
+
+/*
+ * BEACON management packets
+ *
+ *  octet timestamp[8]
+ *  octet beacon interval[2]
+ *  octet capability information[2]
+ *  information element
+ *      octet elemid
+ *      octet length
+ *      octet information[length]
+ */
+
+#define IEEE80211_BEACON_INTERVAL(beacon) \
+    ((beacon)[8] | ((beacon)[9] << 8))
+#define IEEE80211_BEACON_CAPABILITY(beacon) \
+    ((beacon)[10] | ((beacon)[11] << 8))
+
+#define IEEE80211_CAPINFO_ESS               0x0001
+#define IEEE80211_CAPINFO_IBSS              0x0002
+#define IEEE80211_CAPINFO_CF_POLLABLE       0x0004
+#define IEEE80211_CAPINFO_CF_POLLREQ        0x0008
+#define IEEE80211_CAPINFO_PRIVACY           0x0010
+#define IEEE80211_CAPINFO_SHORT_PREAMBLE    0x0020
+#define IEEE80211_CAPINFO_PBCC              0x0040
+#define IEEE80211_CAPINFO_CHNL_AGILITY      0x0080
+/* bits 8-9 are reserved */
+#define IEEE80211_CAPINFO_SHORT_SLOTTIME    0x0400
+#define IEEE80211_CAPINFO_APSD              0x0800
+/* bit 12 is reserved */
+#define IEEE80211_CAPINFO_DSSSOFDM          0x2000
+/* bits 14-15 are reserved */
+
+/*
+ * Authentication Modes
+ */
+
+enum ieee80211_authmode {
+    IEEE80211_AUTH_NONE     = 0,
+    IEEE80211_AUTH_OPEN     = 1,
+    IEEE80211_AUTH_SHARED   = 2,
+    IEEE80211_AUTH_8021X    = 3,
+    IEEE80211_AUTH_AUTO     = 4,   /* auto-select/accept */
+    /* NB: these are used only for ioctls */
+    IEEE80211_AUTH_WPA      = 5,  /* WPA/RSN  w/ 802.1x */
+    IEEE80211_AUTH_WPA_PSK  = 6,  /* WPA/RSN  w/ PSK */
+    IEEE80211_AUTH_WPA_CCKM = 7,  /* WPA/RSN IE  w/ CCKM */
+};
+
+#include "athendpack.h"
+
+#endif /* _NET80211_IEEE80211_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_ioctl.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_ioctl.h
new file mode 100644
index 0000000..dab6747
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_ioctl.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
+ */
+
+#ifndef _IEEE80211_IOCTL_H_
+#define _IEEE80211_IOCTL_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
+ */
+
+/*
+ * WPA/RSN get/set key request.  Specify the key/cipher
+ * type and whether the key is to be used for sending and/or
+ * receiving.  The key index should be set only when working
+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
+ * Otherwise a unicast/pairwise key is specified by the bssid
+ * (on a station) or mac address (on an ap).  They key length
+ * must include any MIC key data; otherwise it should be no
+ more than IEEE80211_KEYBUF_SIZE.
+ */
+struct ieee80211req_key {
+	u_int8_t	ik_type;	/* key/cipher type */
+	u_int8_t	ik_pad;
+	u_int16_t	ik_keyix;	/* key index */
+	u_int8_t	ik_keylen;	/* key length in bytes */
+	u_int8_t	ik_flags;
+#define IEEE80211_KEY_XMIT  0x01
+#define IEEE80211_KEY_RECV  0x02
+#define	IEEE80211_KEY_DEFAULT	0x80	/* default xmit key */
+	u_int8_t	ik_macaddr[IEEE80211_ADDR_LEN];
+	u_int64_t	ik_keyrsc;	/* key receive sequence counter */
+	u_int64_t	ik_keytsc;	/* key transmit sequence counter */
+	u_int8_t	ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+/*
+ * Delete a key either by index or address.  Set the index
+ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
+ */
+struct ieee80211req_del_key {
+	u_int8_t	idk_keyix;	/* key index */
+	u_int8_t	idk_macaddr[IEEE80211_ADDR_LEN];
+};
+/*
+ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
+ * only makes sense when operating as a station.  The other
+ * requests can be used when operating as a station or an
+ * ap (to effect a station).
+ */
+struct ieee80211req_mlme {
+	u_int8_t	im_op;		/* operation to perform */
+#define	IEEE80211_MLME_ASSOC		1	/* associate station */
+#define	IEEE80211_MLME_DISASSOC		2	/* disassociate station */
+#define	IEEE80211_MLME_DEAUTH		3	/* deauthenticate station */
+#define	IEEE80211_MLME_AUTHORIZE	4	/* authorize station */
+#define	IEEE80211_MLME_UNAUTHORIZE	5	/* unauthorize station */
+	u_int16_t	im_reason;	/* 802.11 reason code */
+	u_int8_t	im_macaddr[IEEE80211_ADDR_LEN];
+};
+
+struct ieee80211req_addpmkid {
+    u_int8_t    pi_bssid[IEEE80211_ADDR_LEN];
+    u_int8_t    pi_enable;
+    u_int8_t    pi_pmkid[16];
+};
+
+#define AUTH_ALG_OPEN_SYSTEM	0x01
+#define AUTH_ALG_SHARED_KEY	0x02
+#define AUTH_ALG_LEAP		0x04
+
+struct ieee80211req_authalg {
+   u_int8_t auth_alg;
+};
+
+/*
+ * Request to add an IE to a Management Frame
+ */
+enum{
+    IEEE80211_APPIE_FRAME_BEACON     = 0,
+    IEEE80211_APPIE_FRAME_PROBE_REQ  = 1,
+    IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
+    IEEE80211_APPIE_FRAME_ASSOC_REQ  = 3,
+    IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
+    IEEE80211_APPIE_NUM_OF_FRAME     = 5
+};
+
+/*
+ * The Maximum length of the IE that can be added to a Management frame
+ */
+#define IEEE80211_APPIE_FRAME_MAX_LEN  78
+
+struct ieee80211req_getset_appiebuf {
+    u_int32_t app_frmtype; /* management frame type for which buffer is added */
+    u_int32_t app_buflen;  /*application supplied buffer length */
+    u_int8_t  app_buf[];
+};
+
+/*
+ * The following definitions are used by an application to set filter
+ * for receiving management frames
+ */
+enum {
+     IEEE80211_FILTER_TYPE_BEACON      =   0x1,
+     IEEE80211_FILTER_TYPE_PROBE_REQ   =   0x2,
+     IEEE80211_FILTER_TYPE_PROBE_RESP  =   0x4,
+     IEEE80211_FILTER_TYPE_ASSOC_REQ   =   0x8,
+     IEEE80211_FILTER_TYPE_ASSOC_RESP  =   0x10,
+     IEEE80211_FILTER_TYPE_AUTH        =   0x20,
+     IEEE80211_FILTER_TYPE_DEAUTH      =   0x40,
+     IEEE80211_FILTER_TYPE_DISASSOC    =   0x80,
+     IEEE80211_FILTER_TYPE_ALL         =   0xFF  /* used to check the valid filter bits */
+};
+
+struct ieee80211req_set_filter {
+      u_int32_t app_filterype; /* management frame filter type */
+};
+
+enum {
+    IEEE80211_PARAM_AUTHMODE = 3,   /* Authentication Mode */
+    IEEE80211_PARAM_MCASTCIPHER = 5,
+    IEEE80211_PARAM_MCASTKEYLEN = 6,    /* multicast key length */
+    IEEE80211_PARAM_UCASTCIPHER = 8,
+    IEEE80211_PARAM_UCASTKEYLEN = 9,    /* unicast key length */
+	IEEE80211_PARAM_WPA		= 10,	/* WPA mode (0,1,2) */
+	IEEE80211_PARAM_ROAMING		= 12,	/* roaming mode */
+	IEEE80211_PARAM_PRIVACY		= 13,	/* privacy invoked */
+	IEEE80211_PARAM_COUNTERMEASURES	= 14,	/* WPA/TKIP countermeasures */
+	IEEE80211_PARAM_DROPUNENCRYPTED	= 15,	/* discard unencrypted frames */
+};
+
+/*
+ * Values for IEEE80211_PARAM_WPA
+ */
+#define WPA_MODE_WPA1   1
+#define WPA_MODE_WPA2   2
+#define WPA_MODE_AUTO   3
+#define WPA_MODE_NONE   4
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _IEEE80211_IOCTL_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_node.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_node.h
new file mode 100644
index 0000000..46b613c
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ieee80211_node.h
@@ -0,0 +1,77 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _IEEE80211_NODE_H_
+#define _IEEE80211_NODE_H_
+
+/*
+ * Node locking definitions.
+ */
+#define IEEE80211_NODE_LOCK_INIT(_nt)   A_MUTEX_INIT(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_DESTROY(_nt)
+#define IEEE80211_NODE_LOCK(_nt)        A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK(_nt)      A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_BH(_nt)     A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK_BH(_nt)   A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_ASSERT(_nt)
+
+/*
+ * Node reference counting definitions.
+ *
+ * ieee80211_node_initref   initialize the reference count to 1
+ * ieee80211_node_incref    add a reference
+ * ieee80211_node_decref    remove a reference
+ * ieee80211_node_dectestref    remove a reference and return 1 if this
+ *              is the last reference, otherwise 0
+ * ieee80211_node_refcnt    reference count for printing (only)
+ */
+#define ieee80211_node_initref(_ni)     ((_ni)->ni_refcnt = 1)
+#define ieee80211_node_incref(_ni)      ((_ni)->ni_refcnt++)
+#define ieee80211_node_decref(_ni)      ((_ni)->ni_refcnt--)
+#define ieee80211_node_dectestref(_ni)  (((_ni)->ni_refcnt--) == 0)
+#define ieee80211_node_refcnt(_ni)      ((_ni)->ni_refcnt)
+
+#define IEEE80211_NODE_HASHSIZE 32
+/* simple hash is enough for variation of macaddr */
+#define IEEE80211_NODE_HASH(addr)   \
+    (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \
+        IEEE80211_NODE_HASHSIZE)
+
+/*
+ * Table of ieee80211_node instances.  Each ieee80211com
+ * has at least one for holding the scan candidates.
+ * When operating as an access point or in ibss mode there
+ * is a second table for associated stations or neighbors.
+ */
+struct ieee80211_node_table {
+    void                   *nt_wmip;       /* back reference */
+    A_MUTEX_T               nt_nodelock;    /* on node table */
+    struct bss              *nt_node_first; /* information of all nodes */
+    struct bss              *nt_node_last;  /* information of all nodes */
+    struct bss              *nt_hash[IEEE80211_NODE_HASHSIZE];
+    const char              *nt_name;   /* for debugging */
+    A_UINT32                nt_scangen; /* gen# for timeout scan */
+    A_TIMER                 nt_inact_timer;
+    A_UINT8                 isTimerArmed;   /* is the node timer armed */
+};
+
+#define WLAN_NODE_INACT_TIMEOUT_MSEC            10000
+
+#endif /* _IEEE80211_NODE_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ini_dset.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ini_dset.h
new file mode 100644
index 0000000..410f2b5
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/ini_dset.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#ifndef _INI_DSET_H_
+#define _INI_DSET_H_
+
+/*
+ * Each of these represents a WHAL INI table, which consists
+ * of an "address column" followed by 1 or more "value columns".
+ *
+ * Software uses the base WHAL_INI_DATA_ID+column to access a
+ * DataSet that holds a particular column of data.
+ */
+typedef enum {
+    WHAL_INI_DATA_ID_NULL               =0,
+    WHAL_INI_DATA_ID_MODE_SPECIFIC      =1,  /* 2,3 */
+    WHAL_INI_DATA_ID_COMMON             =4,  /* 5 */
+    WHAL_INI_DATA_ID_BB_RFGAIN          =6,  /* 7,8 */
+    WHAL_INI_DATA_ID_ANALOG_BANK1       =9,  /* 10 */
+    WHAL_INI_DATA_ID_ANALOG_BANK2       =11, /* 12 */
+    WHAL_INI_DATA_ID_ANALOG_BANK3       =13, /* 14, 15 */
+    WHAL_INI_DATA_ID_ANALOG_BANK6       =16, /* 17, 18 */
+    WHAL_INI_DATA_ID_ANALOG_BANK7       =19, /* 20 */
+    WHAL_INI_DATA_ID_MODE_OVERRIDES     =21, /* 22,23 */
+    WHAL_INI_DATA_ID_COMMON_OVERRIDES   =24, /* 25 */
+
+    WHAL_INI_DATA_ID_MAX                =25
+} WHAL_INI_DATA_ID;
+
+typedef PREPACK struct {
+    A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common
+    A_UINT16 offset;
+    A_UINT32 newValue;
+} POSTPACK INI_DSET_REG_OVERRIDE;
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regDb.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regDb.h
new file mode 100644
index 0000000..b3f665f
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regDb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2005 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This module contains the header files for regulatory module,
+ * which include the DB schema and DB values.
+ * $Id:
+ */
+
+#ifndef __REG_DB_H__
+#define __REG_DB_H__
+
+#include "./regulatory/reg_dbschema.h"
+#include "./regulatory/reg_dbvalues.h"
+
+#endif  /* __REG_DB_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regdump.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regdump.h
new file mode 100644
index 0000000..0106825
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/regdump.h
@@ -0,0 +1,33 @@
+#ifndef __REGDUMP_H__
+#define __REGDUMP_H__
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#if defined(AR6001)
+#include "AR6001/AR6001_regdump.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/AR6002_regdump.h"
+#endif
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+struct register_dump_s {
+    A_UINT32 target_id;               /* Target ID */
+    A_UINT32 assline;                 /* Line number (if assertion failure) */
+    A_UINT32 pc;                      /* Program Counter at time of exception */
+    A_UINT32 badvaddr;                /* Virtual address causing exception */
+    CPU_exception_frame_t exc_frame;  /* CPU-specific exception info */
+
+    /* Could copy top of stack here, too.... */
+};
+#endif /* __ASSEMBLER__ */
+#endif /* __REGDUMP_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/targaddrs.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/targaddrs.h
new file mode 100644
index 0000000..da2a650
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/targaddrs.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __TARGADDRS_H__
+#define __TARGADDRS_H__
+#if defined(AR6001)
+#include "AR6001/addrs.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/addrs.h"
+#endif
+
+/*
+ * AR6K option bits, to enable/disable various features.
+ * By default, all option bits are 0.
+ * These bits can be set in LOCAL_SCRATCH register 0.
+ */
+#define AR6K_OPTION_BMI_DISABLE      0x01 /* Disable BMI comm with Host */
+#define AR6K_OPTION_SERIAL_ENABLE    0x02 /* Enable serial port msgs */
+#define AR6K_OPTION_WDT_DISABLE      0x04 /* WatchDog Timer override */
+#define AR6K_OPTION_SLEEP_DISABLE    0x08 /* Disable system sleep */
+#define AR6K_OPTION_STOP_BOOT        0x10 /* Stop boot processes (for ATE) */
+#define AR6K_OPTION_ENABLE_NOANI     0x20 /* Operate without ANI */
+#define AR6K_OPTION_DSET_DISABLE     0x40 /* Ignore DataSets */
+#define AR6K_OPTION_IGNORE_FLASH     0x80 /* Ignore flash during bootup */
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure.  It must match the address of the _host_interest
+ * symbol (see linker script).
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end) across software releases.
+ */
+#define AR6001_HOST_INTEREST_ADDRESS     0x80000600
+#define AR6002_HOST_INTEREST_ADDRESS     0x00500400
+
+#define HOST_INTEREST_MAX_SIZE          0x100
+
+#if !defined(__ASSEMBLER__)
+struct register_dump_s;
+struct dbglog_hdr_s;
+
+/*
+ * These are items that the Host may need to access
+ * via BMI or via the Diagnostic Window. The position
+ * of items in this structure must remain constant
+ * across firmware revisions!
+ *
+ * Types for each item must be fixed size across
+ * target and host platforms.
+ *
+ * More items may be added at the end.
+ */
+struct host_interest_s {
+    /*
+     * Pointer to application-defined area, if any.
+     * Set by Target application during startup.
+     */
+    A_UINT32               hi_app_host_interest;                      /* 0x00 */
+
+    /* Pointer to register dump area, valid after Target crash. */
+    A_UINT32               hi_failure_state;                          /* 0x04 */
+
+    /* Pointer to debug logging header */
+    A_UINT32               hi_dbglog_hdr;                             /* 0x08 */
+
+    /* Indicates whether or not flash is present on Target.
+     * NB: flash_is_present indicator is here not just
+     * because it might be of interest to the Host; but
+     * also because it's set early on by Target's startup
+     * asm code and we need it to have a special RAM address
+     * so that it doesn't get reinitialized with the rest
+     * of data.
+     */
+    A_UINT32               hi_flash_is_present;                       /* 0x0c */
+
+    /*
+     * General-purpose flag bits, similar to AR6000_OPTION_* flags.
+     * Can be used by application rather than by OS.
+     */
+    A_UINT32               hi_option_flag;                            /* 0x10 */
+
+    /*
+     * Boolean that determines whether or not to
+     * display messages on the serial port.
+     */
+    A_UINT32               hi_serial_enable;                          /* 0x14 */
+
+    /* Start address of Flash DataSet index, if any */
+    A_UINT32               hi_dset_list_head;                         /* 0x18 */
+
+    /* Override Target application start address */
+    A_UINT32               hi_app_start;                              /* 0x1c */
+
+    /* Clock and voltage tuning */
+    A_UINT32               hi_skip_clock_init;                        /* 0x20 */
+    A_UINT32               hi_core_clock_setting;                     /* 0x24 */
+    A_UINT32               hi_cpu_clock_setting;                      /* 0x28 */
+    A_UINT32               hi_system_sleep_setting;                   /* 0x2c */
+    A_UINT32               hi_xtal_control_setting;                   /* 0x30 */
+    A_UINT32               hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
+    A_UINT32               hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
+    A_UINT32               hi_ref_voltage_trim_setting;               /* 0x3c */
+    A_UINT32               hi_clock_info;                             /* 0x40 */
+
+    /*
+     * Flash configuration overrides, used only
+     * when firmware is not executing from flash.
+     * (When using flash, modify the global variables
+     * with equivalent names.)
+     */
+    A_UINT32               hi_bank0_addr_value;                       /* 0x44 */
+    A_UINT32               hi_bank0_read_value;                       /* 0x48 */
+    A_UINT32               hi_bank0_write_value;                      /* 0x4c */
+    A_UINT32               hi_bank0_config_value;                     /* 0x50 */
+
+    /* Pointer to Board Data  */
+    A_UINT32               hi_board_data;                             /* 0x54 */
+    A_UINT32               hi_board_data_initialized;                 /* 0x58 */
+
+    A_UINT32               hi_dset_RAM_index_table;                   /* 0x5c */
+
+    A_UINT32               hi_desired_baud_rate;                      /* 0x60 */
+    A_UINT32               hi_dbglog_config;                          /* 0x64 */
+    A_UINT32               hi_end_RAM_reserve_sz;                     /* 0x68 */
+    A_UINT32               hi_mbox_io_block_sz;                       /* 0x6c */
+
+    A_UINT32               hi_num_bpatch_streams;                     /* 0x70 */
+    A_UINT32               hi_mbox_isr_yield_limit;                   /* 0x74 */
+
+    A_UINT32               hi_refclk_hz;                              /* 0x78 */
+};
+
+/* Bits defined in hi_option_flag */
+#define HI_OPTION_TIMER_WAR     1 /* not really used */
+
+/*
+ * Intended for use by Host software, this macro returns the Target RAM
+ * address of any item in the host_interest structure.
+ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
+ */
+#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
+    ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
+    ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
+
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __TARGADDRS_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/testcmd.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/testcmd.h
new file mode 100644
index 0000000..737533a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/testcmd.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef  TESTCMD_H_
+#define  TESTCMD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ZEROES_PATTERN = 0,
+    ONES_PATTERN,
+    REPEATING_10,
+    PN7_PATTERN,
+    PN9_PATTERN,
+    PN15_PATTERN
+}TX_DATA_PATTERN;
+
+/* Continous tx
+   mode : TCMD_CONT_TX_OFF - Disabling continous tx
+          TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
+          TCMD_CONT_TX_FRAME- Enable continuous modulated tx
+   freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
+dataRate: 0 - 1 Mbps
+          1 - 2 Mbps
+          2 - 5.5 Mbps
+          3 - 11 Mbps
+          4 - 6 Mbps
+          5 - 9 Mbps
+          6 - 12 Mbps
+          7 - 18 Mbps
+          8 - 24 Mbps
+          9 - 36 Mbps
+         10 - 28 Mbps
+         11 - 54 Mbps
+  txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx
+antenna:  1 - one antenna
+          2 - two antenna
+Note : Enable/disable continuous tx test cmd works only when target is awake.
+*/
+
+typedef enum {
+    TCMD_CONT_TX_OFF = 0,
+    TCMD_CONT_TX_SINE,
+    TCMD_CONT_TX_FRAME,
+    TCMD_CONT_TX_TX99,
+    TCMD_CONT_TX_TX100
+} TCMD_CONT_TX_MODE;
+
+typedef PREPACK struct {
+    A_UINT32                 testCmdId;
+    A_UINT32                mode;
+    A_UINT32                freq;
+    A_UINT32                dataRate;
+    A_INT32                 txPwr;
+    A_UINT32                antenna;
+    A_UINT32                enANI;
+    A_UINT32                scramblerOff;
+    A_UINT32                aifsn;
+    A_UINT16                pktSz;
+    A_UINT16                txPattern;
+} POSTPACK TCMD_CONT_TX;
+
+#define TCMD_TXPATTERN_ZERONE                 0x1
+#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE    0x2
+
+/* Continuous Rx
+ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames)
+      TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest
+                                             address equal specified
+                                             mac address (set via act =3)
+      TCMD_CONT_RX_REPORT  off mode  (disable cont rx mode and get the
+                                          report from the last cont
+                                          Rx test)
+
+     TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the
+                                                 target. This Overrides
+                                                 the default MAC address.)
+
+*/
+typedef enum {
+    TCMD_CONT_RX_PROMIS =0,
+    TCMD_CONT_RX_FILTER,
+    TCMD_CONT_RX_REPORT,
+    TCMD_CONT_RX_SETMAC
+} TCMD_CONT_RX_ACT;
+
+typedef PREPACK struct {
+    A_UINT32         testCmdId;
+    A_UINT32        act;
+    A_UINT32        enANI;
+    PREPACK union {
+        struct PREPACK TCMD_CONT_RX_PARA {
+            A_UINT32    freq;
+            A_UINT32    antenna;
+        } POSTPACK para;
+        struct PREPACK TCMD_CONT_RX_REPORT {
+            A_UINT32    totalPkt;
+            A_INT32    rssiInDBm;
+        } POSTPACK report;
+        struct PREPACK TCMD_CONT_RX_MAC {
+            A_UCHAR    addr[ATH_MAC_LEN];
+        } POSTPACK mac;
+    } POSTPACK u;
+} POSTPACK TCMD_CONT_RX;
+
+/* Force sleep/wake  test cmd
+ mode: TCMD_PM_WAKEUP - Wakeup the target
+       TCMD_PM_SLEEP - Force the target to sleep.
+ */
+typedef enum {
+    TCMD_PM_WAKEUP = 1, /* be consistent with target */
+    TCMD_PM_SLEEP
+} TCMD_PM_MODE;
+
+typedef PREPACK struct {
+	A_UINT32  testCmdId;
+    A_UINT32  mode;
+} POSTPACK TCMD_PM;
+
+typedef enum{
+    TCMD_CONT_TX_ID,
+    TCMD_CONT_RX_ID,
+    TCMD_PM_ID
+   } TCMD_ID;
+
+typedef PREPACK union {
+          TCMD_CONT_TX contTx;
+          TCMD_CONT_RX contRx;
+          TCMD_PM pm ;
+} POSTPACK TEST_CMD;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TESTCMD_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_api.h
new file mode 100644
index 0000000..aabca4b
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_api.h
@@ -0,0 +1,101 @@
+#ifndef _HOST_WLAN_API_H_
+#define _HOST_WLAN_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API for the host wlan module
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ieee80211_node_table;
+struct ieee80211_frame;
+
+struct ieee80211_common_ie {
+    A_UINT16    ie_chan;
+    A_UINT8     *ie_tstamp;
+    A_UINT8     *ie_ssid;
+    A_UINT8     *ie_rates;
+    A_UINT8     *ie_xrates;
+    A_UINT8     *ie_country;
+    A_UINT8     *ie_wpa;
+    A_UINT8     *ie_rsn;
+    A_UINT8     *ie_wmm;
+    A_UINT8     *ie_ath;
+    A_UINT16    ie_capInfo;
+    A_UINT16    ie_beaconInt;
+    A_UINT8     *ie_tim;
+    A_UINT8     *ie_chswitch;
+    A_UINT8     ie_erp;
+    A_UINT8     *ie_wsc;
+};
+
+typedef struct bss {
+    A_UINT8                      ni_macaddr[6];
+    A_UINT8                      ni_snr;
+    A_INT16                      ni_rssi;
+    struct bss                   *ni_list_next;
+    struct bss                   *ni_list_prev;
+    struct bss                   *ni_hash_next;
+    struct bss                   *ni_hash_prev;
+    struct ieee80211_common_ie   ni_cie;
+    A_UINT8                     *ni_buf;
+    struct ieee80211_node_table *ni_table;
+    A_UINT32                     ni_refcnt;
+    int                          ni_scangen;
+    A_UINT32                     ni_tstamp;
+} bss_t;
+
+typedef void wlan_node_iter_func(void *arg, bss_t *);
+
+bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size);
+void wlan_node_free(bss_t *ni);
+void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+                const A_UINT8 *macaddr);
+bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr);
+void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni);
+void wlan_free_allnodes(struct ieee80211_node_table *nt);
+void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+                        void *arg);
+
+void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt);
+void wlan_node_table_reset(struct ieee80211_node_table *nt);
+void wlan_node_table_cleanup(struct ieee80211_node_table *nt);
+
+A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen,
+                           struct ieee80211_common_ie *cie);
+
+A_UINT16 wlan_ieee2freq(int chan);
+A_UINT32 wlan_freq2ieee(A_UINT16 freq);
+
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+					A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_WLAN_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_dset.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_dset.h
new file mode 100644
index 0000000..8a876d6
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wlan_dset.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2007 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __WLAN_DSET_H__
+#define __WKAN_DSET_H__
+
+typedef PREPACK struct wow_config_dset {
+
+    A_UINT8 valid_dset;
+    A_UINT8 gpio_enable;
+    A_UINT16 gpio_pin;
+} POSTPACK WOW_CONFIG_DSET;
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi.h
new file mode 100644
index 0000000..045acd4
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi.h
@@ -0,0 +1,1743 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all the
+ * commands and events. Commands are messages from the host to the WM.
+ * Events and Replies are messages from the WM to the host.
+ *
+ * Ownership of correctness in regards to WMI commands
+ * belongs to the host driver and the WM is not required to validate
+ * parameters for value, proper range, or any other checking.
+ *
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "wmix.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define WMI_PROTOCOL_VERSION    0x0002
+#define WMI_PROTOCOL_REVISION   0x0000
+
+#define ATH_MAC_LEN             6               /* length of mac in bytes */
+#define WMI_CMD_MAX_LEN         100
+#define WMI_CONTROL_MSG_MAX_LEN     256
+#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
+#define IS_ETHERTYPE(_typeOrLen)        ((_typeOrLen) >= 0x0600)
+#define RFC1042OUI      {0x00, 0x00, 0x00}
+
+#define IP_ETHERTYPE 0x0800
+
+#define WMI_IMPLICIT_PSTREAM 0xFF
+#define WMI_MAX_THINSTREAM 15
+
+struct host_app_area_s {
+    A_UINT32 wmi_protocol_ver;
+};
+
+/*
+ * Data Path
+ */
+typedef PREPACK struct {
+    A_UINT8     dstMac[ATH_MAC_LEN];
+    A_UINT8     srcMac[ATH_MAC_LEN];
+    A_UINT16    typeOrLen;
+} POSTPACK ATH_MAC_HDR;
+
+typedef PREPACK struct {
+    A_UINT8     dsap;
+    A_UINT8     ssap;
+    A_UINT8     cntl;
+    A_UINT8     orgCode[3];
+    A_UINT16    etherType;
+} POSTPACK ATH_LLC_SNAP_HDR;
+
+typedef enum {
+    DATA_MSGTYPE = 0x0,
+    CNTL_MSGTYPE,
+    SYNC_MSGTYPE
+} WMI_MSG_TYPE;
+
+
+typedef PREPACK struct {
+    A_INT8      rssi;
+    A_UINT8     info;            /* WMI_MSG_TYPE in lower 2 bits - b1b0 */
+                                 /* UP in next 3 bits - b4b3b2 */
+#define WMI_DATA_HDR_MSG_TYPE_MASK  0x03
+#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
+#define WMI_DATA_HDR_UP_MASK        0x07
+#define WMI_DATA_HDR_UP_SHIFT       2
+#define WMI_DATA_HDR_IS_MSG_TYPE(h, t)  (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
+} POSTPACK WMI_DATA_HDR;
+
+
+#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
+#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
+
+/*
+ * Control Path
+ */
+typedef PREPACK struct {
+    A_UINT16    commandId;
+} POSTPACK WMI_CMD_HDR;        /* used for commands and events */
+
+/*
+ * List of Commnands
+ */
+typedef enum {
+    WMI_CONNECT_CMDID           = 0x0001,
+    WMI_RECONNECT_CMDID,
+    WMI_DISCONNECT_CMDID,
+    WMI_SYNCHRONIZE_CMDID,
+    WMI_CREATE_PSTREAM_CMDID,
+    WMI_DELETE_PSTREAM_CMDID,
+    WMI_START_SCAN_CMDID,
+    WMI_SET_SCAN_PARAMS_CMDID,
+    WMI_SET_BSS_FILTER_CMDID,
+    WMI_SET_PROBED_SSID_CMDID,
+    WMI_SET_LISTEN_INT_CMDID,
+    WMI_SET_BMISS_TIME_CMDID,
+    WMI_SET_DISC_TIMEOUT_CMDID,
+    WMI_GET_CHANNEL_LIST_CMDID,
+    WMI_SET_BEACON_INT_CMDID,
+    WMI_GET_STATISTICS_CMDID,
+    WMI_SET_CHANNEL_PARAMS_CMDID,
+    WMI_SET_POWER_MODE_CMDID,
+    WMI_SET_IBSS_PM_CAPS_CMDID,
+    WMI_SET_POWER_PARAMS_CMDID,
+    WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+    WMI_ADD_CIPHER_KEY_CMDID,
+    WMI_DELETE_CIPHER_KEY_CMDID,
+    WMI_ADD_KRK_CMDID,
+    WMI_DELETE_KRK_CMDID,
+    WMI_SET_PMKID_CMDID,
+    WMI_SET_TX_PWR_CMDID,
+    WMI_GET_TX_PWR_CMDID,
+    WMI_SET_ASSOC_INFO_CMDID,
+    WMI_ADD_BAD_AP_CMDID,
+    WMI_DELETE_BAD_AP_CMDID,
+    WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+    WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+    WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+    WMI_SET_ACCESS_PARAMS_CMDID,
+    WMI_SET_RETRY_LIMITS_CMDID,
+    WMI_SET_OPT_MODE_CMDID,
+    WMI_OPT_TX_FRAME_CMDID,
+    WMI_SET_VOICE_PKT_SIZE_CMDID,
+    WMI_SET_MAX_SP_LEN_CMDID,
+    WMI_SET_ROAM_CTRL_CMDID,
+    WMI_GET_ROAM_TBL_CMDID,
+    WMI_GET_ROAM_DATA_CMDID,
+    WMI_ENABLE_RM_CMDID,
+    WMI_SET_MAX_OFFHOME_DURATION_CMDID,
+    WMI_EXTENSION_CMDID,                        /* Non-wireless extensions */
+    WMI_SNR_THRESHOLD_PARAMS_CMDID,
+    WMI_LQ_THRESHOLD_PARAMS_CMDID,
+    WMI_SET_LPREAMBLE_CMDID,
+    WMI_SET_RTS_CMDID,
+    WMI_CLR_RSSI_SNR_CMDID,
+    WMI_SET_FIXRATES_CMDID,
+    WMI_GET_FIXRATES_CMDID,
+    WMI_SET_AUTH_MODE_CMDID,
+    WMI_SET_REASSOC_MODE_CMDID,
+    WMI_SET_WMM_CMDID,
+    WMI_SET_WMM_TXOP_CMDID,
+    WMI_TEST_CMDID,
+    WMI_SET_BT_STATUS_CMDID,
+    WMI_SET_BT_PARAMS_CMDID,
+
+    WMI_SET_KEEPALIVE_CMDID,
+    WMI_GET_KEEPALIVE_CMDID,
+    WMI_SET_APPIE_CMDID,
+    WMI_GET_APPIE_CMDID,
+    WMI_SET_WSC_STATUS_CMDID,
+
+    /* Wake on Wireless */
+    WMI_SET_HOST_SLEEP_MODE_CMDID,
+    WMI_SET_WOW_MODE_CMDID,
+    WMI_GET_WOW_LIST_CMDID,
+    WMI_ADD_WOW_PATTERN_CMDID,
+    WMI_DEL_WOW_PATTERN_CMDID,
+    WMI_SET_MAC_ADDRESS_CMDID,
+    WMI_SET_AKMP_PARAMS_CMDID,
+    WMI_SET_PMKID_LIST_CMDID,
+    WMI_GET_PMKID_LIST_CMDID,
+
+    /*
+     * Developer commands starts at 0xF000
+     */
+    WMI_SET_BITRATE_CMDID = 0xF000,
+    WMI_GET_BITRATE_CMDID,
+    WMI_SET_WHALPARAM_CMDID,
+
+} WMI_COMMAND_ID;
+
+/*
+ * Frame Types
+ */
+typedef enum {
+    WMI_FRAME_BEACON        =   0,
+    WMI_FRAME_PROBE_REQ,
+    WMI_FRAME_PROBE_RESP,
+    WMI_FRAME_ASSOC_REQ,
+    WMI_FRAME_ASSOC_RESP,
+    WMI_NUM_MGMT_FRAME
+} WMI_MGMT_FRAME_TYPE;
+
+/*
+ * Connect Command
+ */
+typedef enum {
+    INFRA_NETWORK       = 0x01,
+    ADHOC_NETWORK       = 0x02,
+    ADHOC_CREATOR       = 0x04,
+} NETWORK_TYPE;
+
+typedef enum {
+    OPEN_AUTH           = 0x01,
+    SHARED_AUTH         = 0x02,
+    LEAP_AUTH           = 0x04,  /* different from IEEE_AUTH_MODE definitions */
+} DOT11_AUTH_MODE;
+
+typedef enum {
+    NONE_AUTH           = 0x01,
+    WPA_AUTH            = 0x02,
+    WPA_PSK_AUTH        = 0x03,
+    WPA2_AUTH           = 0x04,
+    WPA2_PSK_AUTH       = 0x05,
+    WPA_AUTH_CCKM       = 0x06,
+    WPA2_AUTH_CCKM      = 0x07,
+} AUTH_MODE;
+
+typedef enum {
+    NONE_CRYPT          = 0x01,
+    WEP_CRYPT           = 0x02,
+    TKIP_CRYPT          = 0x03,
+    AES_CRYPT           = 0x04,
+} CRYPTO_TYPE;
+
+#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
+#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
+
+#define WMI_MIN_KEY_INDEX   0
+#define WMI_MAX_KEY_INDEX   3
+
+#define WMI_MAX_KEY_LEN     32
+
+#define WMI_MAX_SSID_LEN    32
+
+typedef enum {
+    CONNECT_ASSOC_POLICY_USER = 0x0001,
+    CONNECT_SEND_REASSOC = 0x0002,
+    CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+    CONNECT_PROFILE_MATCH_DONE = 0x0008,
+    CONNECT_IGNORE_AAC_BEACON = 0x0010,
+    CONNECT_CSA_FOLLOW_BSS = 0x0020,
+} WMI_CONNECT_CTRL_FLAGS_BITS;
+
+#define DEFAULT_CONNECT_CTRL_FLAGS         (CONNECT_CSA_FOLLOW_BSS)
+
+typedef PREPACK struct {
+    A_UINT8     networkType;
+    A_UINT8     dot11AuthMode;
+    A_UINT8     authMode;
+    A_UINT8     pairwiseCryptoType;
+    A_UINT8     pairwiseCryptoLen;
+    A_UINT8     groupCryptoType;
+    A_UINT8     groupCryptoLen;
+    A_UINT8     ssidLength;
+    A_UCHAR     ssid[WMI_MAX_SSID_LEN];
+    A_UINT16    channel;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT32    ctrl_flags;
+} POSTPACK WMI_CONNECT_CMD;
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;                    /* hint */
+    A_UINT8     bssid[ATH_MAC_LEN];         /* mandatory if set */
+} POSTPACK WMI_RECONNECT_CMD;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+typedef enum {
+    PAIRWISE_USAGE      = 0x00,
+    GROUP_USAGE         = 0x01,
+    TX_USAGE            = 0x02,     /* default Tx Key - Static WEP only */
+} KEY_USAGE;
+
+/*
+ * Bit Flag
+ * Bit 0 - Initialise TSC - default is Initialize
+ */
+#define KEY_OP_INIT_TSC       0x01
+#define KEY_OP_INIT_RSC       0x02
+
+#define KEY_OP_INIT_VAL     0x03     /* Default Initialise the TSC & RSC */
+#define KEY_OP_VALID_MASK   0x03
+
+typedef PREPACK struct {
+    A_UINT8     keyIndex;
+    A_UINT8     keyType;
+    A_UINT8     keyUsage;           /* KEY_USAGE */
+    A_UINT8     keyLength;
+    A_UINT8     keyRSC[8];          /* key replay sequence counter */
+    A_UINT8     key[WMI_MAX_KEY_LEN];
+    A_UINT8     key_op_ctrl;       /* Additional Key Control information */
+} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     keyIndex;
+} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
+
+#define WMI_KRK_LEN     16
+/*
+ * WMI_ADD_KRK_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     krk[WMI_KRK_LEN];
+} POSTPACK WMI_ADD_KRK_CMD;
+
+/*
+ * WMI_SET_TKIP_COUNTERMEASURES_CMDID
+ */
+typedef enum {
+    WMI_TKIP_CM_DISABLE = 0x0,
+    WMI_TKIP_CM_ENABLE  = 0x1,
+} WMI_TKIP_CM_CONTROL;
+
+typedef PREPACK struct {
+    A_UINT8  cm_en;                     /* WMI_TKIP_CM_CONTROL */
+} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
+
+/*
+ * WMI_SET_PMKID_CMDID
+ */
+
+#define WMI_PMKID_LEN 16
+
+typedef enum {
+   PMKID_DISABLE = 0,
+   PMKID_ENABLE  = 1,
+} PMKID_ENABLE_FLG;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     enable;                 /* PMKID_ENABLE_FLG */
+    A_UINT8     pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_SET_PMKID_CMD;
+
+/*
+ * WMI_START_SCAN_CMD
+ */
+typedef enum {
+    WMI_LONG_SCAN  = 0,
+    WMI_SHORT_SCAN = 1,
+} WMI_SCAN_TYPE;
+
+typedef PREPACK struct {
+    A_BOOL   forceFgScan;
+    A_BOOL   isLegacy;        /* For Legacy Cisco AP compatibility */
+    A_UINT32 homeDwellTime;   /* Maximum duration in the home channel(milliseconds) */
+    A_UINT32 forceScanInterval;    /* Time interval between scans (milliseconds)*/
+    A_UINT8  scanType;           /* WMI_SCAN_TYPE */
+} POSTPACK WMI_START_SCAN_CMD;
+
+/*
+ * WMI_SET_SCAN_PARAMS_CMDID
+ */
+#define WMI_SHORTSCANRATIO_DEFAULT      3
+typedef enum {
+    CONNECT_SCAN_CTRL_FLAGS = 0x01,    /* set if can scan in the Connect cmd */
+    SCAN_CONNECTED_CTRL_FLAGS = 0x02,  /* set if scan for the SSID it is */
+                                       /* already connected to */
+    ACTIVE_SCAN_CTRL_FLAGS = 0x04,     /* set if enable active scan */
+    ROAM_SCAN_CTRL_FLAGS = 0x08,       /* set if enable roam scan when bmiss and lowrssi */
+    REPORT_BSSINFO_CTRL_FLAGS = 0x10,   /* set if follows customer BSSINFO reporting rule */
+    ENABLE_AUTO_CTRL_FLAGS = 0x20,      /* if disabled, target doesn't
+                                          scan after a disconnect event  */
+    ENABLE_SCAN_ABORT_EVENT = 0x40      /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
+
+} WMI_SCAN_CTRL_FLAGS_BITS;
+
+#define CAN_SCAN_IN_CONNECT(flags)      (flags & CONNECT_SCAN_CTRL_FLAGS)
+#define CAN_SCAN_CONNECTED(flags)       (flags & SCAN_CONNECTED_CTRL_FLAGS)
+#define ENABLE_ACTIVE_SCAN(flags)       (flags & ACTIVE_SCAN_CTRL_FLAGS)
+#define ENABLE_ROAM_SCAN(flags)         (flags & ROAM_SCAN_CTRL_FLAGS)
+#define CONFIG_REPORT_BSSINFO(flags)     (flags & REPORT_BSSINFO_CTRL_FLAGS)
+#define IS_AUTO_SCAN_ENABLED(flags)      (flags & ENABLE_AUTO_CTRL_FLAGS)
+#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
+
+#define DEFAULT_SCAN_CTRL_FLAGS         (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
+
+
+typedef PREPACK struct {
+    A_UINT16    fg_start_period;        /* seconds */
+    A_UINT16    fg_end_period;          /* seconds */
+    A_UINT16    bg_period;              /* seconds */
+    A_UINT16    maxact_chdwell_time;    /* msec */
+    A_UINT16    pas_chdwell_time;       /* msec */
+    A_UINT8     shortScanRatio;         /* how many shorts scan for one long */
+    A_UINT8     scanCtrlFlags;
+    A_UINT16    minact_chdwell_time;    /* msec */
+    A_UINT32    max_dfsch_act_time;  /* msecs */
+} POSTPACK WMI_SCAN_PARAMS_CMD;
+
+/*
+ * WMI_SET_BSS_FILTER_CMDID
+ */
+typedef enum {
+    NONE_BSS_FILTER = 0x0,              /* no beacons forwarded */
+    ALL_BSS_FILTER,                     /* all beacons forwarded */
+    PROFILE_FILTER,                     /* only beacons matching profile */
+    ALL_BUT_PROFILE_FILTER,             /* all but beacons matching profile */
+    CURRENT_BSS_FILTER,                 /* only beacons matching current BSS */
+    ALL_BUT_BSS_FILTER,                 /* all but beacons matching BSS */
+    PROBED_SSID_FILTER,                 /* beacons matching probed ssid */
+    LAST_BSS_FILTER,                    /* marker only */
+} WMI_BSS_FILTER;
+
+typedef PREPACK struct {
+    A_UINT8    bssFilter;                      /* see WMI_BSS_FILTER */
+    A_UINT32   ieMask;
+} POSTPACK WMI_BSS_FILTER_CMD;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX   5
+
+typedef enum {
+    DISABLE_SSID_FLAG  = 0,                  /* disables entry */
+    SPECIFIC_SSID_FLAG = 0x01,               /* probes specified ssid */
+    ANY_SSID_FLAG      = 0x02,               /* probes for any ssid */
+} WMI_SSID_FLAG;
+
+typedef PREPACK struct {
+    A_UINT8     entryIndex;                     /* 0 to MAX_PROBED_SSID_INDEX */
+    A_UINT8     flag;                           /* WMI_SSID_FLG */
+    A_UINT8     ssidLength;
+    A_UINT8     ssid[32];
+} POSTPACK WMI_PROBED_SSID_CMD;
+
+/*
+ * WMI_SET_LISTEN_INT_CMDID
+ * The Listen interval is between 15 and 3000 TUs
+ */
+#define MIN_LISTEN_INTERVAL 15
+#define MAX_LISTEN_INTERVAL 5000
+#define MIN_LISTEN_BEACONS 1
+#define MAX_LISTEN_BEACONS 50
+
+typedef PREPACK struct {
+    A_UINT16     listenInterval;
+    A_UINT16     numBeacons;
+} POSTPACK WMI_LISTEN_INT_CMD;
+
+/*
+ * WMI_SET_BEACON_INT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16     beaconInterval;
+} POSTPACK WMI_BEACON_INT_CMD;
+
+/*
+ * WMI_SET_BMISS_TIME_CMDID
+ * valid values are between 1000 and 5000 TUs
+ */
+
+#define MIN_BMISS_TIME     1000
+#define MAX_BMISS_TIME     5000
+#define MIN_BMISS_BEACONS  1
+#define MAX_BMISS_BEACONS  50
+
+typedef PREPACK struct {
+    A_UINT16     bmissTime;
+    A_UINT16     numBeacons;
+} POSTPACK WMI_BMISS_TIME_CMD;
+
+/*
+ * WMI_SET_POWER_MODE_CMDID
+ */
+typedef enum {
+    REC_POWER = 0x01,
+    MAX_PERF_POWER,
+} WMI_POWER_MODE;
+
+typedef PREPACK struct {
+    A_UINT8     powerMode;      /* WMI_POWER_MODE */
+} POSTPACK WMI_POWER_MODE_CMD;
+
+/*
+ * WMI_SET_POWER_PARAMS_CMDID
+ */
+typedef enum {
+    IGNORE_DTIM = 0x01,
+    NORMAL_DTIM = 0x02,
+    STICK_DTIM  = 0x03,
+} WMI_DTIM_POLICY;
+
+typedef PREPACK struct {
+    A_UINT16    idle_period;             /* msec */
+    A_UINT16    pspoll_number;
+    A_UINT16    dtim_policy;
+} POSTPACK WMI_POWER_PARAMS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8    power_saving;
+    A_UINT8    ttl; /* number of beacon periods */
+    A_UINT16   atim_windows;          /* msec */
+    A_UINT16   timeout_value;         /* msec */
+} POSTPACK WMI_IBSS_PM_CAPS_CMD;
+
+/*
+ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
+ */
+typedef enum {
+    IGNORE_TIM_ALL_QUEUES_APSD = 0,
+    PROCESS_TIM_ALL_QUEUES_APSD = 1,
+    IGNORE_TIM_SIMULATED_APSD = 2,
+    PROCESS_TIM_SIMULATED_APSD = 3,
+} APSD_TIM_POLICY;
+
+typedef PREPACK struct {
+    A_UINT16    psPollTimeout;          /* msec */
+    A_UINT16    triggerTimeout;         /* msec */
+    A_UINT32    apsdTimPolicy;      /* TIM behavior with  ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
+    A_UINT32    simulatedAPSDTimPolicy;      /* TIM behavior with  simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
+} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
+
+/*
+ * WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16    voicePktSize;
+} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
+
+/*
+ * WMI_SET_MAX_SP_LEN_CMDID
+ */
+typedef enum {
+    DELIVER_ALL_PKT = 0x0,
+    DELIVER_2_PKT = 0x1,
+    DELIVER_4_PKT = 0x2,
+    DELIVER_6_PKT = 0x3,
+} APSD_SP_LEN_TYPE;
+
+typedef PREPACK struct {
+    A_UINT8    maxSPLen;
+} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
+
+/*
+ * WMI_SET_DISC_TIMEOUT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     disconnectTimeout;          /* seconds */
+} POSTPACK WMI_DISC_TIMEOUT_CMD;
+
+typedef enum {
+    UPLINK_TRAFFIC = 0,
+    DNLINK_TRAFFIC = 1,
+    BIDIR_TRAFFIC = 2,
+} DIR_TYPE;
+
+typedef enum {
+    DISABLE_FOR_THIS_AC = 0,
+    ENABLE_FOR_THIS_AC  = 1,
+    ENABLE_FOR_ALL_AC   = 2,
+} VOICEPS_CAP_TYPE;
+
+typedef enum {
+    TRAFFIC_TYPE_APERIODIC = 0,
+    TRAFFIC_TYPE_PERIODIC = 1,
+}TRAFFIC_TYPE;
+
+/*
+ * WMI_CREATE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT32        minServiceInt;           /* in milli-sec */
+    A_UINT32        maxServiceInt;           /* in milli-sec */
+    A_UINT32        inactivityInt;           /* in milli-sec */
+    A_UINT32        suspensionInt;           /* in milli-sec */
+    A_UINT32        serviceStartTime;
+    A_UINT32        minDataRate;             /* in bps */
+    A_UINT32        meanDataRate;            /* in bps */
+    A_UINT32        peakDataRate;            /* in bps */
+    A_UINT32        maxBurstSize;
+    A_UINT32        delayBound;
+    A_UINT32        minPhyRate;              /* in bps */
+    A_UINT32        sba;
+    A_UINT32        mediumTime;
+    A_UINT16        nominalMSDU;             /* in octects */
+    A_UINT16        maxMSDU;                 /* in octects */
+    A_UINT8         trafficClass;
+    A_UINT8         trafficType;             /* TRAFFIC_TYPE */
+    A_UINT8         trafficDirection;        /* TRAFFIC_DIR */
+    A_UINT8         voicePSCapability;       /* VOICEPS_CAP_TYPE */
+    A_UINT8         tsid;
+    A_UINT8         userPriority;            /* 802.1D user priority */
+} POSTPACK WMI_CREATE_PSTREAM_CMD;
+
+/*
+ * WMI_DELETE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     trafficClass;
+    A_UINT8     tsid;
+} POSTPACK WMI_DELETE_PSTREAM_CMD;
+
+/*
+ * WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+typedef enum {
+    WMI_11A_MODE  = 0x1,
+    WMI_11G_MODE  = 0x2,
+    WMI_11AG_MODE = 0x3,
+    WMI_11B_MODE  = 0x4,
+    WMI_11GONLY_MODE = 0x5,
+} WMI_PHY_MODE;
+
+#define WMI_MAX_CHANNELS        32
+
+typedef PREPACK struct {
+    A_UINT8     reserved1;
+    A_UINT8     scanParam;              /* set if enable scan */
+    A_UINT8     phyMode;                /* see WMI_PHY_MODE */
+    A_UINT8     numChannels;            /* how many channels follow */
+    A_UINT16    channelList[1];         /* channels in Mhz */
+} POSTPACK WMI_CHANNEL_PARAMS_CMD;
+
+
+/*
+ *  WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ *  Setting the polltime to 0 would disable polling.
+ *  Threshold values are in the ascending order, and should agree to:
+ *  (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
+ *      < highThreshold_upperVal)
+ */
+
+typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
+    A_UINT32    pollTime;               /* Polling time as a factor of LI */
+    A_INT16     thresholdAbove1_Val;          /* lowest of upper */
+    A_INT16     thresholdAbove2_Val;
+    A_INT16     thresholdAbove3_Val;
+    A_INT16     thresholdAbove4_Val;
+    A_INT16     thresholdAbove5_Val;
+    A_INT16     thresholdAbove6_Val;          /* highest of upper */
+    A_INT16     thresholdBelow1_Val;         /* lowest of bellow */
+    A_INT16     thresholdBelow2_Val;
+    A_INT16     thresholdBelow3_Val;
+    A_INT16     thresholdBelow4_Val;
+    A_INT16     thresholdBelow5_Val;
+    A_INT16     thresholdBelow6_Val;         /* highest of bellow */
+    A_UINT8     weight;                  /* "alpha" */
+    A_UINT8     reserved[3];
+} POSTPACK  WMI_RSSI_THRESHOLD_PARAMS_CMD;
+
+/*
+ *  WMI_SNR_THRESHOLD_PARAMS_CMDID
+ *  Setting the polltime to 0 would disable polling.
+ */
+
+typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
+    A_UINT32    pollTime;               /* Polling time as a factor of LI */
+    A_UINT8     weight;                  /* "alpha" */
+    A_UINT8     thresholdAbove1_Val;      /* lowest of uppper*/
+    A_UINT8     thresholdAbove2_Val;
+    A_UINT8     thresholdAbove3_Val;
+    A_UINT8     thresholdAbove4_Val;      /* highest of upper */
+    A_UINT8     thresholdBelow1_Val;     /* lowest of bellow */
+    A_UINT8     thresholdBelow2_Val;
+    A_UINT8     thresholdBelow3_Val;
+    A_UINT8     thresholdBelow4_Val;     /* highest of bellow */
+    A_UINT8     reserved[3];
+} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
+
+/*
+ *  WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
+    A_UINT8     enable;
+    A_UINT8     thresholdAbove1_Val;
+    A_UINT8     thresholdAbove2_Val;
+    A_UINT8     thresholdAbove3_Val;
+    A_UINT8     thresholdAbove4_Val;
+    A_UINT8     thresholdBelow1_Val;
+    A_UINT8     thresholdBelow2_Val;
+    A_UINT8     thresholdBelow3_Val;
+    A_UINT8     thresholdBelow4_Val;
+    A_UINT8     reserved[3];
+} POSTPACK  WMI_LQ_THRESHOLD_PARAMS_CMD;
+
+typedef enum {
+    WMI_LPREAMBLE_DISABLED = 0,
+    WMI_LPREAMBLE_ENABLED
+} WMI_LPREAMBLE_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8     status;
+}POSTPACK WMI_SET_LPREAMBLE_CMD;
+
+typedef PREPACK struct {
+    A_UINT16    threshold;
+}POSTPACK WMI_SET_RTS_CMD;
+
+/*
+ *  WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ *  Sets the error reporting event bitmask in target. Target clears it
+ *  upon an error. Subsequent errors are counted, but not reported
+ *  via event, unless the bitmask is set again.
+ */
+typedef PREPACK struct {
+    A_UINT32    bitmask;
+} POSTPACK  WMI_TARGET_ERROR_REPORT_BITMASK;
+
+/*
+ * WMI_SET_TX_PWR_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     dbM;                  /* in dbM units */
+} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
+
+/*
+ * WMI_SET_ASSOC_INFO_CMDID
+ *
+ * A maximum of 2 private IEs can be sent in the [Re]Assoc request.
+ * A 3rd one, the CCX version IE can also be set from the host.
+ */
+#define WMI_MAX_ASSOC_INFO_TYPE    2
+#define WMI_CCX_VER_IE             2 /* ieType to set CCX Version IE */
+
+#define WMI_MAX_ASSOC_INFO_LEN     240
+
+typedef PREPACK struct {
+    A_UINT8     ieType;
+    A_UINT8     bufferSize;
+    A_UINT8     assocInfo[1];       /* up to WMI_MAX_ASSOC_INFO_LEN */
+} POSTPACK WMI_SET_ASSOC_INFO_CMD;
+
+
+/*
+ * WMI_GET_TX_PWR_CMDID does not take any parameters
+ */
+
+/*
+ * WMI_ADD_BAD_AP_CMDID
+ */
+#define WMI_MAX_BAD_AP_INDEX      1
+
+typedef PREPACK struct {
+    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_ADD_BAD_AP_CMD;
+
+/*
+ * WMI_DELETE_BAD_AP_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
+} POSTPACK WMI_DELETE_BAD_AP_CMD;
+
+/*
+ * WMI_SET_ACCESS_PARAMS_CMDID
+ */
+#define WMI_DEFAULT_TXOP_ACPARAM    0       /* implies one MSDU */
+#define WMI_DEFAULT_ECWMIN_ACPARAM  4       /* corresponds to CWmin of 15 */
+#define WMI_DEFAULT_ECWMAX_ACPARAM  10      /* corresponds to CWmax of 1023 */
+#define WMI_MAX_CW_ACPARAM          15      /* maximum eCWmin or eCWmax */
+#define WMI_DEFAULT_AIFSN_ACPARAM   2
+#define WMI_MAX_AIFSN_ACPARAM       15
+typedef PREPACK struct {
+    A_UINT16 txop;                      /* in units of 32 usec */
+    A_UINT8  eCWmin;
+    A_UINT8  eCWmax;
+    A_UINT8  aifsn;
+} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
+
+
+/*
+ * WMI_SET_RETRY_LIMITS_CMDID
+ *
+ * This command is used to customize the number of retries the
+ * wlan device will perform on a given frame.
+ */
+#define WMI_MIN_RETRIES 2
+#define WMI_MAX_RETRIES 13
+typedef enum {
+    MGMT_FRAMETYPE    = 0,
+    CONTROL_FRAMETYPE = 1,
+    DATA_FRAMETYPE    = 2
+} WMI_FRAMETYPE;
+
+typedef PREPACK struct {
+    A_UINT8 frameType;                      /* WMI_FRAMETYPE */
+    A_UINT8 trafficClass;                   /* applies only to DATA_FRAMETYPE */
+    A_UINT8 maxRetries;
+    A_UINT8 enableNotify;
+} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
+
+/*
+ * WMI_SET_ROAM_CTRL_CMDID
+ *
+ * This command is used to influence the Roaming behaviour
+ * Set the host biases of the BSSs before setting the roam mode as bias
+ * based.
+ */
+
+/*
+ * Different types of Roam Control
+ */
+
+typedef enum {
+        WMI_FORCE_ROAM          = 1,      /* Roam to the specified BSSID */
+        WMI_SET_ROAM_MODE       = 2,      /* default ,progd bias, no roam */
+        WMI_SET_HOST_BIAS       = 3,     /* Set the Host Bias */
+        WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
+} WMI_ROAM_CTRL_TYPE;
+
+#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
+#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
+
+/*
+ * ROAM MODES
+ */
+
+typedef enum {
+        WMI_DEFAULT_ROAM_MODE   = 1,  /* RSSI based ROAM */
+        WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
+        WMI_LOCK_BSS_MODE  = 3  /* Lock to the Current BSS - no Roam */
+} WMI_ROAM_MODE;
+
+/*
+ * BSS HOST BIAS INFO
+ */
+
+typedef PREPACK struct {
+        A_UINT8 bssid[ATH_MAC_LEN];
+        A_INT8  bias;
+} POSTPACK WMI_BSS_BIAS;
+
+typedef PREPACK struct {
+        A_UINT8 numBss;
+        WMI_BSS_BIAS bssBias[1];
+} POSTPACK WMI_BSS_BIAS_INFO;
+
+typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
+        A_UINT16 lowrssi_scan_period;
+        A_INT16  lowrssi_scan_threshold;
+        A_INT16  lowrssi_roam_threshold;
+        A_UINT8  roam_rssi_floor;
+        A_UINT8  reserved[1];              /* For alignment */
+} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
+
+typedef PREPACK struct {
+    PREPACK union {
+        A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
+        A_UINT8 roamMode;           /* WMI_SET_ROAM_MODE  */
+        WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
+        WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
+    } POSTPACK info;
+    A_UINT8   roamCtrlType ;
+} POSTPACK WMI_SET_ROAM_CTRL_CMD;
+
+/*
+ * WMI_ENABLE_RM_CMDID
+ */
+typedef PREPACK struct {
+        A_BOOL enable_radio_measurements;
+} POSTPACK WMI_ENABLE_RM_CMD;
+
+/*
+ * WMI_SET_MAX_OFFHOME_DURATION_CMDID
+ */
+typedef PREPACK struct {
+        A_UINT8 max_offhome_duration;
+} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
+
+typedef PREPACK struct {
+    A_UINT32 frequency;
+    A_UINT8  threshold;
+} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
+
+typedef enum {
+    BT_STREAM_UNDEF = 0,
+    BT_STREAM_SCO,             /* SCO stream */
+    BT_STREAM_A2DP,            /* A2DP stream */
+    BT_STREAM_MAX
+} BT_STREAM_TYPE;
+
+typedef enum {
+    BT_PARAM_SCO = 1,         /* SCO stream parameters */
+    BT_PARAM_A2DP,            /* A2DP stream parameters */
+    BT_PARAM_MISC,            /* miscellaneous parameters */
+    BT_PARAM_REGS,            /* co-existence register parameters */
+    BT_PARAM_MAX
+} BT_PARAM_TYPE;
+
+typedef enum {
+    BT_STATUS_UNDEF = 0,
+    BT_STATUS_START,
+    BT_STATUS_STOP,
+    BT_STATUS_RESUME,
+    BT_STATUS_SUSPEND,
+    BT_STATUS_MAX
+} BT_STREAM_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8 streamType;
+    A_UINT8 status;
+} POSTPACK WMI_SET_BT_STATUS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 noSCOPkts;
+    A_UINT8 pspollTimeout;
+    A_UINT8 stompbt;
+} POSTPACK BT_PARAMS_SCO;
+
+typedef PREPACK struct {
+    A_UINT32 period;
+    A_UINT32 dutycycle;
+    A_UINT8  stompbt;
+} POSTPACK BT_PARAMS_A2DP;
+
+typedef PREPACK struct {
+    A_UINT32 mode;
+    A_UINT32 scoWghts;
+    A_UINT32 a2dpWghts;
+    A_UINT32 genWghts;
+    A_UINT32 mode2;
+    A_UINT8  setVal;
+} POSTPACK BT_COEX_REGS;
+
+typedef enum {
+    WLAN_PROTECT_POLICY = 1,
+    WLAN_COEX_CTRL_FLAGS
+} BT_PARAMS_MISC_TYPE;
+
+typedef enum {
+    WLAN_PROTECT_PER_STREAM = 0x01,   /* default */
+    WLAN_PROTECT_ANY_TX = 0x02
+} WLAN_PROTECT_FLAGS;
+
+
+#define WLAN_DISABLE_COEX_IN_DISCONNECT   0x01 /* default */
+#define WLAN_KEEP_COEX_IN_DISCONNECT      0x02
+#define WLAN_STOMPBT_IN_DISCONNECT        0x04
+
+#define WLAN_DISABLE_COEX_IN_ROAM         0x10 /* default */
+#define WLAN_KEEP_COEX_IN_ROAM            0x20
+#define WLAN_STOMPBT_IN_ROAM              0x40
+
+#define WLAN_DISABLE_COEX_IN_SCAN        0x100 /* default */
+#define WLAN_KEEP_COEX_IN_SCAN           0x200
+#define WLAN_STOMPBT_IN_SCAN             0x400
+
+#define WLAN_DISABLE_COEX_BT_OFF        0x1000 /* default */
+#define WLAN_KEEP_COEX_BT_OFF           0x2000
+#define WLAN_STOMPBT_BT_OFF             0x4000
+
+typedef PREPACK struct {
+    A_UINT32 period;
+    A_UINT32 dutycycle;
+    A_UINT8  stompbt;
+    A_UINT8  policy;
+} POSTPACK WLAN_PROTECT_POLICY_TYPE;
+
+typedef PREPACK struct {
+    PREPACK union {
+        WLAN_PROTECT_POLICY_TYPE protectParams;
+        A_UINT16 wlanCtrlFlags;
+    } POSTPACK info;
+    A_UINT8 paramType;
+} POSTPACK BT_PARAMS_MISC;
+
+typedef PREPACK struct {
+    PREPACK union {
+        BT_PARAMS_SCO scoParams;
+        BT_PARAMS_A2DP a2dpParams;
+        BT_PARAMS_MISC miscParams;
+        BT_COEX_REGS regs;
+    } POSTPACK info;
+    A_UINT8 paramType;
+} POSTPACK WMI_SET_BT_PARAMS_CMD;
+
+/*
+ * Command Replies
+ */
+
+/*
+ * WMI_GET_CHANNEL_LIST_CMDID reply
+ */
+typedef PREPACK struct {
+    A_UINT8     reserved1;
+    A_UINT8     numChannels;            /* number of channels in reply */
+    A_UINT16    channelList[1];         /* channel in Mhz */
+} POSTPACK WMI_CHANNEL_LIST_REPLY;
+
+typedef enum {
+    A_SUCCEEDED = A_OK,
+    A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
+    A_SUCCEEDED_MODIFY_STREAM=251,
+    A_FAILED_INVALID_STREAM = 252,
+    A_FAILED_MAX_THINSTREAMS = 253,
+    A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
+} PSTREAM_REPLY_STATUS;
+
+/*
+ * List of Events (target to host)
+ */
+typedef enum {
+    WMI_READY_EVENTID           = 0x1001,
+    WMI_CONNECT_EVENTID,
+    WMI_DISCONNECT_EVENTID,
+    WMI_BSSINFO_EVENTID,
+    WMI_CMDERROR_EVENTID,
+    WMI_REGDOMAIN_EVENTID,
+    WMI_PSTREAM_TIMEOUT_EVENTID,
+    WMI_NEIGHBOR_REPORT_EVENTID,
+    WMI_TKIP_MICERR_EVENTID,
+    WMI_SCAN_COMPLETE_EVENTID,
+    WMI_REPORT_STATISTICS_EVENTID,
+    WMI_RSSI_THRESHOLD_EVENTID,
+    WMI_ERROR_REPORT_EVENTID,
+    WMI_OPT_RX_FRAME_EVENTID,
+    WMI_REPORT_ROAM_TBL_EVENTID,
+    WMI_EXTENSION_EVENTID,
+    WMI_CAC_EVENTID,
+    WMI_SNR_THRESHOLD_EVENTID,
+    WMI_LQ_THRESHOLD_EVENTID,
+    WMI_TX_RETRY_ERR_EVENTID,
+    WMI_REPORT_ROAM_DATA_EVENTID,
+    WMI_TEST_EVENTID,
+    WMI_APLIST_EVENTID,
+    WMI_GET_WOW_LIST_EVENTID,
+    WMI_GET_PMKID_LIST_EVENTID
+} WMI_EVENT_ID;
+
+typedef enum {
+    WMI_11A_CAPABILITY   = 1,
+    WMI_11G_CAPABILITY   = 2,
+    WMI_11AG_CAPABILITY  = 3,
+} WMI_PHY_CAPABILITY;
+
+typedef PREPACK struct {
+    A_UINT8     macaddr[ATH_MAC_LEN];
+    A_UINT8     phyCapability;              /* WMI_PHY_CAPABILITY */
+} POSTPACK WMI_READY_EVENT;
+
+/*
+ * Connect Event
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT16    listenInterval;
+    A_UINT16    beaconInterval;
+    A_UINT32    networkType;
+    A_UINT8     beaconIeLen;
+    A_UINT8     assocReqLen;
+    A_UINT8     assocRespLen;
+    A_UINT8     assocInfo[1];
+} POSTPACK WMI_CONNECT_EVENT;
+
+/*
+ * Disconnect Event
+ */
+typedef enum {
+    NO_NETWORK_AVAIL   = 0x01,
+    LOST_LINK          = 0x02,     /* bmiss */
+    DISCONNECT_CMD     = 0x03,
+    BSS_DISCONNECTED   = 0x04,
+    AUTH_FAILED        = 0x05,
+    ASSOC_FAILED       = 0x06,
+    NO_RESOURCES_AVAIL = 0x07,
+    CSERV_DISCONNECT   = 0x08,
+    INVALID_PROFILE    = 0x0a,
+    DOT11H_CHANNEL_SWITCH = 0x0b,
+} WMI_DISCONNECT_REASON;
+
+typedef PREPACK struct {
+    A_UINT16    protocolReasonStatus;  /* reason code, see 802.11 spec. */
+    A_UINT8     bssid[ATH_MAC_LEN];    /* set if known */
+    A_UINT8     disconnectReason ;      /* see WMI_DISCONNECT_REASON */
+    A_UINT8     assocRespLen;
+    A_UINT8     assocInfo[1];
+} POSTPACK WMI_DISCONNECT_EVENT;
+
+/*
+ * BSS Info Event.
+ * Mechanism used to inform host of the presence and characteristic of
+ * wireless networks present.  Consists of bss info header followed by
+ * the beacon or probe-response frame body.  The 802.11 header is not included.
+ */
+typedef enum {
+    BEACON_FTYPE = 0x1,
+    PROBERESP_FTYPE,
+    ACTION_MGMT_FTYPE,
+} WMI_BI_FTYPE;
+
+enum {
+    BSS_ELEMID_CHANSWITCH = 0x01,
+    BSS_ELEMID_ATHEROS = 0x02,
+};
+
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     frameType;          /* see WMI_BI_FTYPE */
+    A_UINT8     snr;
+    A_INT16     rssi;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT32    ieMask;
+} POSTPACK WMI_BSS_INFO_HDR;
+
+/*
+ * Command Error Event
+ */
+typedef enum {
+    INVALID_PARAM  = 0x01,
+    ILLEGAL_STATE  = 0x02,
+    INTERNAL_ERROR = 0x03,
+} WMI_ERROR_CODE;
+
+typedef PREPACK struct {
+    A_UINT16    commandId;
+    A_UINT8     errorCode;
+} POSTPACK WMI_CMD_ERROR_EVENT;
+
+/*
+ * New Regulatory Domain Event
+ */
+typedef PREPACK struct {
+    A_UINT32    regDomain;
+} POSTPACK WMI_REG_DOMAIN_EVENT;
+
+typedef PREPACK struct {
+    A_UINT8     trafficClass;
+} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
+
+/*
+ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
+ * the host of BSS's it has found that matches the current profile.
+ * It can be used by the host to cache PMKs and/to initiate pre-authentication
+ * if the BSS supports it.  The first bssid is always the current associated
+ * BSS.
+ * The bssid and bssFlags information repeats according to the number
+ * or APs reported.
+ */
+typedef enum {
+    WMI_DEFAULT_BSS_FLAGS   = 0x00,
+    WMI_PREAUTH_CAPABLE_BSS = 0x01,
+    WMI_PMKID_VALID_BSS     = 0x02,
+} WMI_BSS_FLAGS;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     bssFlags;            /* see WMI_BSS_FLAGS */
+} POSTPACK WMI_NEIGHBOR_INFO;
+
+typedef PREPACK struct {
+    A_INT8      numberOfAps;
+    WMI_NEIGHBOR_INFO neighbor[1];
+} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
+
+/*
+ * TKIP MIC Error Event
+ */
+typedef PREPACK struct {
+    A_UINT8 keyid;
+    A_UINT8 ismcast;
+} POSTPACK WMI_TKIP_MICERR_EVENT;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
+ */
+typedef PREPACK struct {
+    A_STATUS status;
+} POSTPACK WMI_SCAN_COMPLETE_EVENT;
+
+#define MAX_OPT_DATA_LEN 1400
+
+/*
+ * WMI_SET_ADHOC_BSSID_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
+
+/*
+ * WMI_SET_OPT_MODE_CMDID
+ */
+typedef enum {
+    SPECIAL_OFF,
+    SPECIAL_ON,
+} OPT_MODE_TYPE;
+
+typedef PREPACK struct {
+    A_UINT8     optMode;
+} POSTPACK WMI_SET_OPT_MODE_CMD;
+
+/*
+ * WMI_TX_OPT_FRAME_CMDID
+ */
+typedef enum {
+    OPT_PROBE_REQ   = 0x01,
+    OPT_PROBE_RESP  = 0x02,
+    OPT_CPPP_START  = 0x03,
+    OPT_CPPP_STOP   = 0x04,
+} WMI_OPT_FTYPE;
+
+typedef PREPACK struct {
+    A_UINT16    optIEDataLen;
+    A_UINT8     frmType;
+    A_UINT8     dstAddr[ATH_MAC_LEN];
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     reserved;               /* For alignment */
+    A_UINT8     optIEData[1];
+} POSTPACK WMI_OPT_TX_FRAME_CMD;
+
+/*
+ * Special frame receive Event.
+ * Mechanism used to inform host of the receiption of the special frames.
+ * Consists of special frame info header followed by special frame body.
+ * The 802.11 header is not included.
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     frameType;          /* see WMI_OPT_FTYPE */
+    A_INT8      snr;
+    A_UINT8     srcAddr[ATH_MAC_LEN];
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_OPT_RX_INFO_HDR;
+
+/*
+ * Reporting statistics.
+ */
+typedef PREPACK struct {
+    A_UINT32   tx_packets;
+    A_UINT32   tx_bytes;
+    A_UINT32   tx_unicast_pkts;
+    A_UINT32   tx_unicast_bytes;
+    A_UINT32   tx_multicast_pkts;
+    A_UINT32   tx_multicast_bytes;
+    A_UINT32   tx_broadcast_pkts;
+    A_UINT32   tx_broadcast_bytes;
+    A_UINT32   tx_rts_success_cnt;
+    A_UINT32   tx_packet_per_ac[4];
+    A_UINT32   tx_errors_per_ac[4];
+
+    A_UINT32   tx_errors;
+    A_UINT32   tx_failed_cnt;
+    A_UINT32   tx_retry_cnt;
+    A_UINT32   tx_rts_fail_cnt;
+    A_INT32    tx_unicast_rate;
+}POSTPACK tx_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   rx_packets;
+    A_UINT32   rx_bytes;
+    A_UINT32   rx_unicast_pkts;
+    A_UINT32   rx_unicast_bytes;
+    A_UINT32   rx_multicast_pkts;
+    A_UINT32   rx_multicast_bytes;
+    A_UINT32   rx_broadcast_pkts;
+    A_UINT32   rx_broadcast_bytes;
+    A_UINT32   rx_fragment_pkt;
+
+    A_UINT32   rx_errors;
+    A_UINT32   rx_crcerr;
+    A_UINT32   rx_key_cache_miss;
+    A_UINT32   rx_decrypt_err;
+    A_UINT32   rx_duplicate_frames;
+    A_INT32    rx_unicast_rate;
+}POSTPACK rx_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   tkip_local_mic_failure;
+    A_UINT32   tkip_counter_measures_invoked;
+    A_UINT32   tkip_replays;
+    A_UINT32   tkip_format_errors;
+    A_UINT32   ccmp_format_errors;
+    A_UINT32   ccmp_replays;
+}POSTPACK tkip_ccmp_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   power_save_failure_cnt;
+}POSTPACK pm_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32    cs_bmiss_cnt;
+    A_UINT32    cs_lowRssi_cnt;
+    A_UINT16    cs_connect_cnt;
+    A_UINT16    cs_disconnect_cnt;
+    A_INT16     cs_aveBeacon_rssi;
+    A_UINT16    cs_roam_count;
+    A_UINT16    cs_rssi;
+    A_UINT8     cs_snr;
+    A_UINT8     cs_aveBeacon_snr;
+    A_UINT8     cs_lastRoam_msec;
+} POSTPACK cserv_stats_t;
+
+typedef PREPACK struct {
+    tx_stats_t          tx_stats;
+    rx_stats_t          rx_stats;
+    tkip_ccmp_stats_t   tkipCcmpStats;
+}POSTPACK wlan_net_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32    wow_num_pkts_dropped;
+    A_UINT16    wow_num_events_discarded;
+    A_UINT8     wow_num_host_pkt_wakeups;
+    A_UINT8     wow_num_host_event_wakeups;
+} POSTPACK wlan_wow_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32            lqVal;
+    A_INT32             noise_floor_calibation;
+    pm_stats_t          pmStats;
+    wlan_net_stats_t    txrxStats;
+    wlan_wow_stats_t    wowStats;
+    cserv_stats_t       cservStats;
+} POSTPACK WMI_TARGET_STATS;
+
+/*
+ * WMI_RSSI_THRESHOLD_EVENTID.
+ * Indicate the RSSI events to host. Events are indicated when we breach a
+ * thresold value.
+ */
+typedef enum{
+    WMI_RSSI_THRESHOLD1_ABOVE = 0,
+    WMI_RSSI_THRESHOLD2_ABOVE,
+    WMI_RSSI_THRESHOLD3_ABOVE,
+    WMI_RSSI_THRESHOLD4_ABOVE,
+    WMI_RSSI_THRESHOLD5_ABOVE,
+    WMI_RSSI_THRESHOLD6_ABOVE,
+    WMI_RSSI_THRESHOLD1_BELOW,
+    WMI_RSSI_THRESHOLD2_BELOW,
+    WMI_RSSI_THRESHOLD3_BELOW,
+    WMI_RSSI_THRESHOLD4_BELOW,
+    WMI_RSSI_THRESHOLD5_BELOW,
+    WMI_RSSI_THRESHOLD6_BELOW
+}WMI_RSSI_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_INT16 rssi;
+    A_UINT8 range;
+}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
+
+/*
+ *  WMI_ERROR_REPORT_EVENTID
+ */
+typedef enum{
+    WMI_TARGET_PM_ERR_FAIL      = 0x00000001,
+    WMI_TARGET_KEY_NOT_FOUND    = 0x00000002,
+    WMI_TARGET_DECRYPTION_ERR   = 0x00000004,
+    WMI_TARGET_BMISS            = 0x00000008,
+    WMI_PSDISABLE_NODE_JOIN     = 0x00000010,
+    WMI_TARGET_COM_ERR          = 0x00000020,
+    WMI_TARGET_FATAL_ERR        = 0x00000040
+} WMI_TARGET_ERROR_VAL;
+
+typedef PREPACK struct {
+    A_UINT32 errorVal;
+}POSTPACK  WMI_TARGET_ERROR_REPORT_EVENT;
+
+typedef PREPACK struct {
+    A_UINT8 retrys;
+}POSTPACK  WMI_TX_RETRY_ERR_EVENT;
+
+typedef enum{
+    WMI_SNR_THRESHOLD1_ABOVE = 1,
+    WMI_SNR_THRESHOLD1_BELOW,
+    WMI_SNR_THRESHOLD2_ABOVE,
+    WMI_SNR_THRESHOLD2_BELOW,
+    WMI_SNR_THRESHOLD3_ABOVE,
+    WMI_SNR_THRESHOLD3_BELOW,
+    WMI_SNR_THRESHOLD4_ABOVE,
+    WMI_SNR_THRESHOLD4_BELOW
+} WMI_SNR_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_UINT8 range;  /* WMI_SNR_THRESHOLD_VAL */
+    A_UINT8 snr;
+}POSTPACK  WMI_SNR_THRESHOLD_EVENT;
+
+typedef enum{
+    WMI_LQ_THRESHOLD1_ABOVE = 1,
+    WMI_LQ_THRESHOLD1_BELOW,
+    WMI_LQ_THRESHOLD2_ABOVE,
+    WMI_LQ_THRESHOLD2_BELOW,
+    WMI_LQ_THRESHOLD3_ABOVE,
+    WMI_LQ_THRESHOLD3_BELOW,
+    WMI_LQ_THRESHOLD4_ABOVE,
+    WMI_LQ_THRESHOLD4_BELOW
+} WMI_LQ_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_INT32 lq;
+    A_UINT8 range;  /* WMI_LQ_THRESHOLD_VAL */
+}POSTPACK  WMI_LQ_THRESHOLD_EVENT;
+/*
+ * WMI_REPORT_ROAM_TBL_EVENTID
+ */
+#define MAX_ROAM_TBL_CAND   5
+
+typedef PREPACK struct {
+    A_INT32 roam_util;
+    A_UINT8 bssid[ATH_MAC_LEN];
+    A_INT8  rssi;
+    A_INT8  rssidt;
+    A_INT8  last_rssi;
+    A_INT8  util;
+    A_INT8  bias;
+    A_UINT8 reserved; /* For alignment */
+} POSTPACK WMI_BSS_ROAM_INFO;
+
+
+typedef PREPACK struct {
+    A_UINT16  roamMode;
+    A_UINT16  numEntries;
+    WMI_BSS_ROAM_INFO bssRoamInfo[1];
+} POSTPACK WMI_TARGET_ROAM_TBL;
+
+/*
+ *  WMI_CAC_EVENTID
+ */
+typedef enum {
+    CAC_INDICATION_ADMISSION = 0x00,
+    CAC_INDICATION_ADMISSION_RESP = 0x01,
+    CAC_INDICATION_DELETE = 0x02,
+    CAC_INDICATION_NO_RESP = 0x03,
+}CAC_INDICATION;
+
+#define WMM_TSPEC_IE_LEN   63
+
+typedef PREPACK struct {
+    A_UINT8 ac;
+    A_UINT8 cac_indication;
+    A_UINT8 statusCode;
+    A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
+}POSTPACK  WMI_CAC_EVENT;
+
+/*
+ * WMI_APLIST_EVENTID
+ */
+
+typedef enum {
+    APLIST_VER1 = 1,
+} APLIST_VER;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT16    channel;
+} POSTPACK  WMI_AP_INFO_V1;
+
+typedef PREPACK union {
+    WMI_AP_INFO_V1  apInfoV1;
+} POSTPACK WMI_AP_INFO;
+
+typedef PREPACK struct {
+    A_UINT8     apListVer;
+    A_UINT8     numAP;
+    WMI_AP_INFO apList[1];
+} POSTPACK WMI_APLIST_EVENT;
+
+/*
+ * developer commands
+ */
+
+/*
+ * WMI_SET_BITRATE_CMDID
+ *
+ * Get bit rate cmd uses same definition as set bit rate cmd
+ */
+typedef enum {
+    RATE_AUTO   = -1,
+    RATE_1Mb    = 0,
+    RATE_2Mb    = 1,
+    RATE_5_5Mb  = 2,
+    RATE_11Mb   = 3,
+    RATE_6Mb    = 4,
+    RATE_9Mb    = 5,
+    RATE_12Mb   = 6,
+    RATE_18Mb   = 7,
+    RATE_24Mb   = 8,
+    RATE_36Mb   = 9,
+    RATE_48Mb   = 10,
+    RATE_54Mb   = 11,
+} WMI_BIT_RATE;
+
+typedef PREPACK struct {
+    A_INT8      rateIndex;          /* see WMI_BIT_RATE */
+} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY;
+
+/*
+ * WMI_SET_FIXRATES_CMDID
+ *
+ * Get fix rates cmd uses same definition as set fix rates cmd
+ */
+typedef enum {
+    FIX_RATE_1Mb    = 0x1,
+    FIX_RATE_2Mb    = 0x2,
+    FIX_RATE_5_5Mb  = 0x4,
+    FIX_RATE_11Mb   = 0x8,
+    FIX_RATE_6Mb    = 0x10,
+    FIX_RATE_9Mb    = 0x20,
+    FIX_RATE_12Mb   = 0x40,
+    FIX_RATE_18Mb   = 0x80,
+    FIX_RATE_24Mb   = 0x100,
+    FIX_RATE_36Mb   = 0x200,
+    FIX_RATE_48Mb   = 0x400,
+    FIX_RATE_54Mb   = 0x800,
+} WMI_FIX_RATES_MASK;
+
+typedef PREPACK struct {
+    A_UINT16      fixRateMask;          /* see WMI_BIT_RATE */
+} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
+
+/*
+ * WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+    RECONN_DO_AUTH = 0x00,
+    RECONN_NOT_AUTH = 0x01
+} WMI_AUTH_MODE;
+
+typedef PREPACK struct {
+    A_UINT8 mode;
+} POSTPACK WMI_SET_AUTH_MODE_CMD;
+
+/*
+ * WMI_SET_REASSOC_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+    REASSOC_DO_DISASSOC = 0x00,
+    REASSOC_DONOT_DISASSOC = 0x01
+} WMI_REASSOC_MODE;
+
+typedef PREPACK struct {
+    A_UINT8 mode;
+}POSTPACK WMI_SET_REASSOC_MODE_CMD;
+
+typedef enum {
+    ROAM_DATA_TIME = 1,            /* Get The Roam Time Data */
+} ROAM_DATA_TYPE;
+
+typedef PREPACK struct {
+    A_UINT32        disassoc_time;
+    A_UINT32        no_txrx_time;
+    A_UINT32        assoc_time;
+    A_UINT32        allow_txrx_time;
+    A_UINT32        last_data_txrx_time;
+    A_UINT32        first_data_txrx_time;
+    A_UINT8         disassoc_bssid[ATH_MAC_LEN];
+    A_INT8          disassoc_bss_rssi;
+    A_UINT8         assoc_bssid[ATH_MAC_LEN];
+    A_INT8          assoc_bss_rssi;
+} POSTPACK WMI_TARGET_ROAM_TIME;
+
+typedef PREPACK struct {
+    PREPACK union {
+        WMI_TARGET_ROAM_TIME roamTime;
+    } POSTPACK u;
+    A_UINT8 roamDataType ;
+} POSTPACK WMI_TARGET_ROAM_DATA;
+
+typedef enum {
+    WMI_WMM_DISABLED = 0,
+    WMI_WMM_ENABLED
+} WMI_WMM_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8    status;
+}POSTPACK WMI_SET_WMM_CMD;
+
+typedef enum {
+    WMI_TXOP_DISABLED = 0,
+    WMI_TXOP_ENABLED
+} WMI_TXOP_CFG;
+
+typedef PREPACK struct {
+    A_UINT8    txopEnable;
+}POSTPACK WMI_SET_WMM_TXOP_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 keepaliveInterval;
+} POSTPACK WMI_SET_KEEPALIVE_CMD;
+
+typedef PREPACK struct {
+    A_BOOL configured;
+    A_UINT8 keepaliveInterval;
+} POSTPACK WMI_GET_KEEPALIVE_CMD;
+
+/*
+ * Add Application specified IE to a management frame
+ */
+#define WMI_MAX_IE_LEN  78
+
+typedef PREPACK struct {
+    A_UINT8 mgmtFrmType;  /* one of WMI_MGMT_FRAME_TYPE */
+    A_UINT8 ieLen;    /* Length  of the IE that should be added to the MGMT frame */
+    A_UINT8 ieInfo[1];
+} POSTPACK WMI_SET_APPIE_CMD;
+
+/*
+ * Notify the WSC registration status to the target
+ */
+#define WSC_REG_ACTIVE     1
+#define WSC_REG_INACTIVE   0
+/* Generic Hal Interface for setting hal paramters. */
+/* Add new Set HAL Param cmdIds here for newer params */
+typedef enum {
+   WHAL_SETCABTO_CMDID = 1,
+}WHAL_CMDID;
+
+typedef PREPACK struct {
+    A_UINT8 cabTimeOut;
+} POSTPACK WHAL_SETCABTO_PARAM;
+
+typedef PREPACK struct {
+    A_UINT8  whalCmdId;
+    A_UINT8 data[1];
+} POSTPACK WHAL_PARAMCMD;
+
+
+#define WOW_MAX_FILTER_LISTS 1 /*4*/
+#define WOW_MAX_FILTERS_PER_LIST 4
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+typedef PREPACK struct {
+    A_UINT8 wow_valid_filter;
+    A_UINT8 wow_filter_id;
+    A_UINT8 wow_filter_size;
+    A_UINT8 wow_filter_offset;
+    A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
+    A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
+} POSTPACK WOW_FILTER;
+
+
+typedef PREPACK struct {
+    A_UINT8 wow_valid_list;
+    A_UINT8 wow_list_id;
+    A_UINT8 wow_num_filters;
+    A_UINT8 wow_total_list_size;
+    WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
+} POSTPACK WOW_FILTER_LIST;
+
+typedef PREPACK struct {
+    A_BOOL awake;
+    A_BOOL asleep;
+} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
+
+typedef PREPACK struct {
+    A_BOOL enable_wow;
+} POSTPACK WMI_SET_WOW_MODE_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 filter_list_id;
+} POSTPACK WMI_GET_WOW_LIST_CMD;
+
+/*
+ * WMI_GET_WOW_LIST_CMD reply
+ */
+typedef PREPACK struct {
+    A_UINT8     num_filters;     /* number of patterns in reply */
+    A_UINT8     this_filter_num; /*  this is filter # x of total num_filters */
+    A_UINT8     wow_mode;
+    A_UINT8     host_mode;
+    WOW_FILTER  wow_filters[1];
+} POSTPACK WMI_GET_WOW_LIST_REPLY;
+
+typedef PREPACK struct {
+    A_UINT8 filter_list_id;
+    A_UINT8 filter_size;
+    A_UINT8 filter_offset;
+    A_UINT8 filter[1];
+} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+    A_UINT16 filter_list_id;
+    A_UINT16 filter_id;
+} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 macaddr[ATH_MAC_LEN];
+} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
+
+/*
+ * WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define WMI_AKMP_MULTI_PMKID_EN   0x000001
+
+typedef PREPACK struct {
+    A_UINT32    akmpInfo;
+} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_PMKID;
+
+/*
+ * WMI_SET_PMKID_LIST_CMD
+ */
+#define WMI_MAX_PMKID_CACHE   8
+
+typedef PREPACK struct {
+    A_UINT32    numPMKID;
+    WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
+} POSTPACK WMI_SET_PMKID_LIST_CMD;
+
+/*
+ * WMI_GET_PMKID_LIST_CMD  Reply
+ * Following the Number of PMKIDs is the list of PMKIDs
+ */
+typedef PREPACK struct {
+    A_UINT32    numPMKID;
+    WMI_PMKID   pmkidList[1];
+} POSTPACK WMI_PMKID_LIST_REPLY;
+
+/* index used for priority streams */
+typedef enum {
+    WMI_NOT_MAPPED  = -1,
+    WMI_CONTROL_PRI = 0,
+    WMI_BEST_EFFORT_PRI = 1,
+    WMI_LOW_PRI = 2,
+    WMI_HIGH_PRI = 3,
+    WMI_HIGHEST_PRI,
+    WMI_PRI_MAX_COUNT
+} WMI_PRI_STREAM_ID;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi_api.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi_api.h
new file mode 100644
index 0000000..267edfd
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmi_api.h
@@ -0,0 +1,260 @@
+#ifndef _WMI_API_H_
+#define _WMI_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the definitions for the Wireless Module Interface (WMI).
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * IP QoS Field definitions according to 802.1p
+ */
+#define BEST_EFFORT_PRI         0
+#define BACKGROUND_PRI          1
+#define EXCELLENT_EFFORT_PRI    3
+#define CONTROLLED_LOAD_PRI     4
+#define VIDEO_PRI               5
+#define VOICE_PRI               6
+#define NETWORK_CONTROL_PRI     7
+#define MAX_NUM_PRI             8
+
+#define UNDEFINED_PRI           (0xff)
+
+/* simple mapping of IP TOS field to a WMI priority stream
+ * this mapping was taken from the original linux driver implementation
+ * The operation maps the following
+ *
+ *  */
+#define IP_TOS_TO_WMI_PRI(tos)  \
+    ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03))
+
+#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */
+
+
+struct wmi_t;
+
+void *wmi_init(void *devt);
+
+void wmi_qos_state_init(struct wmi_t *wmip);
+void wmi_shutdown(struct wmi_t *wmip);
+A_UINT16  wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8);
+A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType);
+A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_syncpoint(struct wmi_t *wmip);
+A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip);
+WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass);
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up);
+
+A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf);
+void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg);
+void wmi_free_allnodes(struct wmi_t *wmip);
+bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr);
+
+
+typedef enum {
+    NO_SYNC_WMIFLAG = 0,
+    SYNC_BEFORE_WMIFLAG,            /* transmit all queued data before cmd */
+    SYNC_AFTER_WMIFLAG,             /* any new data waits until cmd execs */
+    SYNC_BOTH_WMIFLAG,
+    END_WMIFLAG                     /* end marker */
+} WMI_SYNC_FLAG;
+
+A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+                      WMI_SYNC_FLAG flag);
+A_STATUS wmi_connect_cmd(struct wmi_t *wmip,
+                         NETWORK_TYPE netType,
+                         DOT11_AUTH_MODE dot11AuthMode,
+                         AUTH_MODE authMode,
+                         CRYPTO_TYPE pairwiseCrypto,
+                         A_UINT8 pairwiseCryptoLen,
+                         CRYPTO_TYPE groupCrypto,
+                         A_UINT8 groupCryptoLen,
+                         int ssidLength,
+                         A_UCHAR *ssid,
+                         A_UINT8 *bssid,
+                         A_UINT16 channel,
+                         A_UINT32 ctrl_flags);
+A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip,
+                           A_UINT8 *bssid,
+                           A_UINT16 channel);
+A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip);
+A_STATUS wmi_getrev_cmd(struct wmi_t *wmip);
+A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+                           A_BOOL forceFgScan, A_BOOL isLegacy,
+                           A_UINT32 homeDwellTime, A_UINT32 forceScanInterval);
+A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+                            A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+                            A_UINT16 minact_chdw_msec,
+                            A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec,
+                            A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+                            A_UINT32 max_dfsch_act_time);
+A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask);
+A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+                            A_UINT8 ssidLength, A_UCHAR *ssid);
+A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons);
+A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons);
+A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+                           A_UINT8 ieLen, A_UINT8 *ieInfo);
+A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode);
+A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+                            A_UINT16 atim_windows, A_UINT16 timeout_value);
+A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+                           A_UINT16 psPollNum, A_UINT16 dtimPolicy);
+A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout);
+A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber);
+A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream);
+A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID);
+A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip);
+A_INT8   wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+                                   WMI_PHY_MODE mode, A_INT8 numChan,
+                                   A_UINT16 *channelList);
+
+A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip,
+                                       WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd);
+A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+                                        WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd);
+A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip);
+A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip,
+                                      WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd);
+A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold);
+A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status);
+
+A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask);
+
+A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie,
+                                    A_UINT32 source);
+A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+                                     A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+                                     A_UINT32 valid);
+A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip);
+A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex,
+                        CRYPTO_TYPE keyType, A_UINT8 keyUsage,
+                        A_UINT8 keyLength,A_UINT8 *keyRSC,
+                        A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+                        WMI_SYNC_FLAG sync_flag);
+A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk);
+A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip);
+A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex);
+A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+                                 WMI_SET_AKMP_PARAMS_CMD *akmpParams);
+A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+                                WMI_SET_PMKID_LIST_CMD *pmkInfo);
+A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM);
+A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip);
+A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on);
+A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid);
+A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex);
+A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en);
+A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+                          A_BOOL set);
+A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop,
+                                   A_UINT8 eCWmin, A_UINT8 eCWmax,
+                                   A_UINT8 aifsn);
+A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+                                  A_UINT8 trafficClass, A_UINT8 maxRetries,
+                                  A_UINT8 enableNotify);
+
+void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid);
+
+A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType);
+A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+                               A_UINT8 size);
+A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+                            A_UINT8 size);
+
+A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode);
+A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+                              A_UINT8 frmType,
+                              A_UINT8 *dstMacAddr,
+                              A_UINT8 *bssid,
+                              A_UINT16 optIEDataLen,
+                              A_UINT8 *optIEData);
+
+A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl);
+A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize);
+A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen);
+A_UINT8  convert_userPriority_to_trafficClass(A_UINT8 userPriority);
+A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip);
+A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance);
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len);
+#endif
+
+A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status);
+A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd);
+
+
+/*
+ *  This function is used to configure the fix rates mask to the target.
+ */
+A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask);
+A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip);
+
+A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status);
+A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable);
+
+A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip);
+A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval);
+
+A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType,
+                           A_UINT8 ieLen,A_UINT8 *ieInfo);
+
+A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen);
+A_INT32 wmi_get_rate(A_INT8 rateindex);
+
+/*Wake on Wireless WMI commands*/
+A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd);
+A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd);
+A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd);
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size);
+A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_DEL_WOW_PATTERN_CMD *cmd);
+A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status);
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+				   A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_API_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
new file mode 100644
index 0000000..8f12b5e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all
+ * extended commands and events.  Extensions include useful commands
+ * that are not directly related to wireless activities.  They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ *
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "dbglog.h"
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands.  This allows,
+ * for instance, platform-specific commands.  Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef PREPACK struct {
+    A_UINT32    commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
+    WMIX_DSETDATA_REPLY_CMDID,
+    WMIX_GPIO_OUTPUT_SET_CMDID,
+    WMIX_GPIO_INPUT_GET_CMDID,
+    WMIX_GPIO_REGISTER_SET_CMDID,
+    WMIX_GPIO_REGISTER_GET_CMDID,
+    WMIX_GPIO_INTR_ACK_CMDID,
+    WMIX_HB_CHALLENGE_RESP_CMDID,
+    WMIX_DBGLOG_CFG_MODULE_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
+    WMIX_DSETCLOSE_EVENTID,
+    WMIX_DSETDATAREQ_EVENTID,
+    WMIX_GPIO_INTR_EVENTID,
+    WMIX_GPIO_DATA_EVENTID,
+    WMIX_GPIO_ACK_EVENTID,
+    WMIX_HB_CHALLENGE_RESP_EVENTID,
+    WMIX_DBGLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 dset_id;
+    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+    A_UINT32 offset;
+    A_UINT32 length;
+    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETDATAREQ_EVENT;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_dset_handle;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              access_cookie;
+    A_UINT32              size;
+    A_UINT32              version;
+} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_buf;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              length;
+    A_UINT8               buf[1];
+} POSTPACK WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============GPIO support=================
+ * All masks are 18-bit masks with bit N operating on GPIO pin N.
+ */
+
+#include "gpio.h"
+
+/*
+ * Set GPIO pin output state.
+ * In order for output to be driven, a pin must be enabled for output.
+ * This can be done during initialization through the GPIO Configuration
+ * DataSet, or during operation with the enable_mask.
+ *
+ * If a request is made to simultaneously set/clear or set/disable or
+ * clear/disable or disable/enable, results are undefined.
+ */
+typedef PREPACK struct {
+    A_UINT32              set_mask;             /* pins to set */
+    A_UINT32              clear_mask;           /* pins to clear */
+    A_UINT32              enable_mask;          /* pins to enable for output */
+    A_UINT32              disable_mask;         /* pins to disable/tristate */
+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
+
+/*
+ * Set a GPIO register.  For debug/exceptional cases.
+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
+ * platform-dependent header.
+ */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register ID */
+    A_UINT32              value;                /* value to write */
+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
+
+/* Get a GPIO register.  For debug/exceptional cases. */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register to read */
+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
+
+/*
+ * Host acknowledges and re-arms GPIO interrupts.  A single
+ * message should be used to acknowledge all interrupts that
+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
+ */
+typedef PREPACK struct {
+    A_UINT32              ack_mask;             /* interrupts to acknowledge */
+} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
+
+/*
+ * Target informs Host of GPIO interrupts that have ocurred since the
+ * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
+ * the current GPIO input values is provided -- in order to support
+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
+ */
+typedef PREPACK struct {
+    A_UINT32              intr_mask;            /* pending GPIO interrupts */
+    A_UINT32              input_values;         /* recent GPIO input values */
+} POSTPACK WMIX_GPIO_INTR_EVENT;
+
+/*
+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the mask of GPIO pin inputs and
+ *   reg_id set to GPIO_ID_NONE
+ *
+ *
+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the value of the requested register and
+ *   reg_id identifying the register (reflects the original request)
+ * NB: reg_id supports the future possibility of unsolicited
+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
+ * simplify Host GPIO support.
+ */
+typedef PREPACK struct {
+    A_UINT32              value;
+    A_UINT32              reg_id;
+} POSTPACK WMIX_GPIO_DATA_EVENT;
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef PREPACK struct {
+    A_UINT32              cookie;
+    A_UINT32              source;
+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+typedef PREPACK struct {
+    struct dbglog_config_s config;
+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/common_drv.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/common_drv.c
new file mode 100644
index 0000000..4f12734
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/common_drv.c
@@ -0,0 +1,467 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "targaddrs.h"
+#include "a_osapi.h"
+#include "hif.h"
+#include "htc_api.h"
+#include "bmi.h"
+#include "bmi_msg.h"
+#include "common_drv.h"
+#include "a_debug.h"
+#include "targaddrs.h"
+
+#define HOST_INTEREST_ITEM_ADDRESS(target, item)    \
+(((TargetType) == TARGET_TYPE_AR6001) ?     \
+   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
+   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Compile the 4BYTE version of the window register setup routine,
+ * This mitigates host interconnect issues with non-4byte aligned bus requests, some
+ * interconnects use bus adapters that impose strict limitations.
+ * Since diag window access is not intended for performance critical operations, the 4byte mode should
+ * be satisfactory even though it generates 4X the bus activity. */
+
+#ifdef USE_4BYTE_REGISTER_ACCESS
+
+    /* set the window address register (using 4-byte register access ). */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+    A_STATUS status;
+    A_UINT8 addrValue[4];
+    int i;
+
+        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+         * last to initiate the access cycle */
+
+    for (i = 1; i <= 3; i++) {
+            /* fill the buffer with the address byte value we want to hit 4 times*/
+        addrValue[0] = ((A_UINT8 *)&Address)[i];
+        addrValue[1] = addrValue[0];
+        addrValue[2] = addrValue[0];
+        addrValue[3] = addrValue[0];
+
+            /* hit each byte of the register address with a 4-byte write operation to the same address,
+             * this is a harmless operation */
+        status = HIFReadWrite(hifDevice,
+                              RegisterAddr+i,
+                              addrValue,
+                              4,
+                              HIF_WR_SYNC_BYTE_FIX,
+                              NULL);
+        if (status != A_OK) {
+            break;
+        }
+    }
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+             RegisterAddr, Address));
+        return status;
+    }
+
+        /* write the address register again, this time write the whole 4-byte value.
+         * The effect here is that the LSB write causes the cycle to start, the extra
+         * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr,
+                          (A_UCHAR *)(&Address),
+                          4,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+            RegisterAddr, Address));
+        return status;
+    }
+
+    return A_OK;
+
+
+
+}
+
+
+#else
+
+    /* set the window address register */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+    A_STATUS status;
+
+        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+         * last to initiate the access cycle */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr+1,  /* write upper 3 bytes */
+                          ((A_UCHAR *)(&Address))+1,
+                          sizeof(A_UINT32)-1,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+             RegisterAddr, Address));
+        return status;
+    }
+
+        /* write the LSB of the register, this initiates the operation */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr,
+                          (A_UCHAR *)(&Address),
+                          sizeof(A_UINT8),
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+            RegisterAddr, Address));
+        return status;
+    }
+
+    return A_OK;
+}
+
+#endif
+
+/*
+ * Read from the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+    A_STATUS status;
+
+        /* set window register to start read cycle */
+    status = ar6000_SetAddressWindowRegister(hifDevice,
+                                             WINDOW_READ_ADDR_ADDRESS,
+                                             *address);
+
+    if (status != A_OK) {
+        return status;
+    }
+
+        /* read the data */
+    status = HIFReadWrite(hifDevice,
+                          WINDOW_DATA_ADDRESS,
+                          (A_UCHAR *)data,
+                          sizeof(A_UINT32),
+                          HIF_RD_SYNC_BYTE_INC,
+                          NULL);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
+        return status;
+    }
+
+    return status;
+}
+
+
+/*
+ * Write to the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+    A_STATUS status;
+
+        /* set write data */
+    status = HIFReadWrite(hifDevice,
+                          WINDOW_DATA_ADDRESS,
+                          (A_UCHAR *)data,
+                          sizeof(A_UINT32),
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
+        return status;
+    }
+
+        /* set window register, which starts the write cycle */
+    return ar6000_SetAddressWindowRegister(hifDevice,
+                                           WINDOW_WRITE_ADDR_ADDRESS,
+                                           *address);
+}
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                    A_UCHAR *data, A_UINT32 length)
+{
+    A_UINT32 count;
+    A_STATUS status = A_OK;
+
+    for (count = 0; count < length; count += 4, address += 4) {
+        if ((status = ar6000_ReadRegDiag(hifDevice, &address,
+                                         (A_UINT32 *)&data[count])) != A_OK)
+        {
+            break;
+        }
+    }
+
+    return status;
+}
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                     A_UCHAR *data, A_UINT32 length)
+{
+    A_UINT32 count;
+    A_STATUS status = A_OK;
+
+    for (count = 0; count < length; count += 4, address += 4) {
+        if ((status = ar6000_WriteRegDiag(hifDevice, &address,
+                                          (A_UINT32 *)&data[count])) != A_OK)
+        {
+            break;
+        }
+    }
+
+    return status;
+}
+
+A_STATUS
+ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice)
+{
+    int i;
+    struct forceROM_s {
+        A_UINT32 addr;
+        A_UINT32 data;
+    };
+    struct forceROM_s *ForceROM;
+    int szForceROM;
+    A_UINT32 instruction;
+
+    static struct forceROM_s ForceROM_REV2[] = {
+        /* NB: This works for old REV2 ROM (old). */
+        {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */
+        {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */
+
+        {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */
+        {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */
+        {MC_REMAP_SIZE_ADDRESS, 0x00000000},   /* ...1 cache line */
+        {MC_REMAP_VALID_ADDRESS, 0x00000001},  /* ...remap is valid */
+
+        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+
+        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+    };
+
+    static struct forceROM_s ForceROM_NEW[] = {
+        /* NB: This works for AR6000 ROM REV3 and beyond.  */
+        {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH},
+        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+    };
+
+    /*
+     * Examine a semi-arbitrary instruction that's different
+     * in REV2 and other revisions.
+     * NB: If a Host port does not require simultaneous support
+     * for multiple revisions of Target ROM, this code can be elided.
+     */
+    (void)ar6000_ReadDataDiag(hifDevice, 0x01000040,
+                              (A_UCHAR *)&instruction, 4);
+
+    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction));
+
+    if (instruction == 0x3c1aa200) {
+        /* It's an old ROM */
+        ForceROM = ForceROM_REV2;
+        szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM);
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n"));
+    } else {
+        ForceROM = ForceROM_NEW;
+        szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n"));
+    }
+
+    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n"));
+    for (i = 0; i < szForceROM; i++)
+    {
+        if (ar6000_WriteRegDiag(hifDevice,
+                                &ForceROM[i].addr,
+                                &ForceROM[i].data) != A_OK)
+        {
+            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
+            return A_ERROR;
+        }
+    }
+
+    msleep(50); /* delay to allow dragon to come to BMI phase  */
+    return A_OK;
+}
+
+/* reset device */
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+
+#if !defined(DWSIM)
+    A_STATUS status = A_OK;
+    A_UINT32 address;
+    A_UINT32 data;
+
+    do {
+
+        // address = RESET_CONTROL_ADDRESS;
+        data = RESET_CONTROL_COLD_RST_MASK;
+
+          /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */
+        if (TargetType == TARGET_TYPE_AR6001) {
+            address = 0x0C000000;
+        } else {
+            if (TargetType == TARGET_TYPE_AR6002) {
+                address = 0x00004000;
+            } else {
+                A_ASSERT(0);
+            }
+        }
+
+        status = ar6000_WriteRegDiag(hifDevice, &address, &data);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        /*
+         * Read back the RESET CAUSE register to ensure that the cold reset
+         * went through.
+         */
+        msleep(2000); /* 2 second delay to allow things to settle down */
+
+
+        // address = RESET_CAUSE_ADDRESS;
+        /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */
+        if (TargetType == TARGET_TYPE_AR6001) {
+            address = 0x0C0000CC;
+        } else {
+            if (TargetType == TARGET_TYPE_AR6002) {
+                address = 0x000040C0;
+            } else {
+                A_ASSERT(0);
+            }
+        }
+
+        data = 0;
+        status = ar6000_ReadRegDiag(hifDevice, &address, &data);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data));
+        data &= RESET_CAUSE_LAST_MASK;
+        if (data != 2) {
+            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n"));
+        }
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n"));
+    }
+#endif
+    return A_OK;
+}
+
+#define REG_DUMP_COUNT_AR6001   38  /* WORDs, derived from AR6001_regdump.h */
+#define REG_DUMP_COUNT_AR6002   32  /* WORDs, derived from AR6002_regdump.h */
+
+
+#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002
+#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6002
+#else
+#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6001
+#endif
+
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+    A_UINT32 address;
+    A_UINT32 regDumpArea = 0;
+    A_STATUS status;
+    A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX];
+    A_UINT32 regDumpCount = 0;
+    A_UINT32 i;
+
+    do {
+
+            /* the reg dump pointer is copied to the host interest area */
+        address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state);
+
+        if (TargetType == TARGET_TYPE_AR6001) {
+                /* for AR6001, this is a fixed location because the ptr is actually stuck in cache,
+                 * this may be fixed in later firmware versions */
+            address = 0x18a0;
+            regDumpCount = REG_DUMP_COUNT_AR6001;
+
+        } else  if (TargetType == TARGET_TYPE_AR6002) {
+
+            regDumpCount = REG_DUMP_COUNT_AR6002;
+
+        } else {
+            A_ASSERT(0);
+        }
+
+            /* read RAM location through diagnostic window */
+        status = ar6000_ReadRegDiag(hifDevice, &address, &regDumpArea);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea));
+
+        if (regDumpArea == 0) {
+                /* no reg dump */
+            break;
+        }
+
+        if (TargetType == TARGET_TYPE_AR6001) {
+            regDumpArea &= 0x0FFFFFFF;  /* convert to physical address in target memory */
+        }
+
+            /* fetch register dump data */
+        status = ar6000_ReadDataDiag(hifDevice,
+                                     regDumpArea,
+                                     (A_UCHAR *)&regDumpValues[0],
+                                     regDumpCount * (sizeof(A_UINT32)));
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n"));
+
+        for (i = 0; i < regDumpCount; i++) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d :  0x%8.8X \n",i, regDumpValues[i]));
+        }
+
+    } while (FALSE);
+
+}
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/credit_dist.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/credit_dist.c
new file mode 100644
index 0000000..8d37d62
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/miscdrv/credit_dist.c
@@ -0,0 +1,346 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc_api.h"
+#include "common_drv.h"
+
+/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/
+
+#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */
+
+#ifdef NO_VO_SERVICE
+#define DATA_SVCS_USED 3
+#else
+#define DATA_SVCS_USED 4
+#endif
+
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                        HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+/* reduce an ep's credits back to a set limit */
+static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST  *pEpDist,
+                                int                       Limit)
+{
+    int credits;
+
+        /* set the new limit */
+    pEpDist->TxCreditsAssigned = Limit;
+
+    if (pEpDist->TxCredits <= Limit) {
+        return;
+    }
+
+        /* figure out how much to take away */
+    credits = pEpDist->TxCredits - Limit;
+        /* take them away */
+    pEpDist->TxCredits -= credits;
+    pCredInfo->CurrentFreeCredits += credits;
+}
+
+/* give an endpoint some credits from the free credit pool */
+#define GiveCredits(pCredInfo,pEpDist,credits)      \
+{                                                   \
+    (pEpDist)->TxCredits += (credits);              \
+    (pEpDist)->TxCreditsAssigned += (credits);      \
+    (pCredInfo)->CurrentFreeCredits -= (credits);   \
+}
+
+
+/* default credit init callback.
+ * This function is called in the context of HTCStart() to setup initial (application-specific)
+ * credit distributions */
+static void ar6000_credit_init(void                     *Context,
+                               HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                               int                      TotalCredits)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      count;
+    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+    pCredInfo->CurrentFreeCredits = TotalCredits;
+    pCredInfo->TotalAvailableCredits = TotalCredits;
+
+    pCurEpDist = pEPList;
+
+        /* run through the list and initialize */
+    while (pCurEpDist != NULL) {
+
+            /* set minimums for each endpoint */
+        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+
+        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+                /* give control service some credits */
+            GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin);
+                /* control service is always marked active, it never goes inactive EVER */
+            SET_EP_ACTIVE(pCurEpDist);
+        } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) {
+                /* this is the lowest priority data endpoint, save this off for easy access */
+            pCredInfo->pLowestPriEpDist = pCurEpDist;
+        }
+
+        /* Streams have to be created (explicit | implicit)for all kinds
+         * of traffic. BE endpoints are also inactive in the beginning.
+         * When BE traffic starts it creates implicit streams that
+         * redistributes credits.
+         */
+
+        /* note, all other endpoints have minimums set but are initially given NO credits.
+         * Credits will be distributed as traffic activity demands */
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+    if (pCredInfo->CurrentFreeCredits <= 0) {
+        AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits));
+        A_ASSERT(FALSE);
+        return;
+    }
+
+        /* reset list */
+    pCurEpDist = pEPList;
+        /* now run through the list and set max operating credit limits for everyone */
+    while (pCurEpDist != NULL) {
+        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+                /* control service max is just 1 max message */
+            pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg;
+        } else {
+                /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are
+                 * the same.
+                 * We use a simple calculation here, we take the remaining credits and
+                 * determine how many max messages this can cover and then set each endpoint's
+                 * normal value equal to half this amount.
+                 * */
+            count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg;
+            count = count >> 1;
+            count = max(count,pCurEpDist->TxCreditsPerMaxMsg);
+                /* set normal */
+            pCurEpDist->TxCreditsNorm = count;
+
+        }
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+}
+
+
+/* default credit distribution callback
+ * This callback is invoked whenever endpoints require credit distributions.
+ * A lock is held while this function is invoked, this function shall NOT block.
+ * The pEPDistList is a list of distribution structures in prioritized order as
+ * defined by the call to the HTCSetCreditDistribution() api.
+ *
+ */
+static void ar6000_credit_distribute(void                     *Context,
+                                     HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+                                     HTC_CREDIT_DIST_REASON   Reason)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+    switch (Reason) {
+        case HTC_CREDIT_DIST_SEND_COMPLETE :
+            pCurEpDist = pEPDistList;
+                /* we are given the start of the endpoint distribution list.
+                 * There may be one or more endpoints to service.
+                 * Run through the list and distribute credits */
+            while (pCurEpDist != NULL) {
+
+                if (pCurEpDist->TxCreditsToDist > 0) {
+                        /* return the credits back to the endpoint */
+                    pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+                        /* always zero out when we are done */
+                    pCurEpDist->TxCreditsToDist = 0;
+
+                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) {
+                            /* reduce to the assigned limit, previous credit reductions
+                             * could have caused the limit to change */
+                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned);
+                    }
+
+                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) {
+                            /* oversubscribed endpoints need to reduce back to normal */
+                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm);
+                    }
+                }
+
+                pCurEpDist = pCurEpDist->pNext;
+            }
+
+            A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+            break;
+
+        case HTC_CREDIT_DIST_ACTIVITY_CHANGE :
+            RedistributeCredits(pCredInfo,pEPDistList);
+            break;
+        case HTC_CREDIT_DIST_SEEK_CREDITS :
+            SeekCredits(pCredInfo,pEPDistList);
+            break;
+        case HTC_DUMP_CREDIT_STATE :
+            AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n",
+            								pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits));
+            break;
+        default:
+            break;
+
+    }
+
+}
+
+/* redistribute credits based on activity change */
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList;
+
+        /* walk through the list and remove credits from inactive endpoints */
+    while (pCurEpDist != NULL) {
+
+        if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) {
+            if (!IS_EP_ACTIVE(pCurEpDist)) {
+                    /* EP is inactive, reduce credits back to zero */
+                ReduceCredits(pCredInfo, pCurEpDist, 0);
+            }
+        }
+
+        /* NOTE in the active case, we do not need to do anything further,
+         * when an EP goes active and needs credits, HTC will call into
+         * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS  */
+
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+    A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+}
+
+/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                        HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      credits = 0;
+    int                      need;
+
+    do {
+
+        if (pEPDist->ServiceID == WMI_CONTROL_SVC) {
+                /* we never oversubscribe on the control service, this is not
+                 * a high performance path and the target never holds onto control
+                 * credits for too long */
+            break;
+        }
+
+        /* for all other services, we follow a simple algorithm of
+         * 1. checking the free pool for credits
+         * 2. checking lower priority endpoints for credits to take */
+
+        if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) {
+                /* try to give more credits than it needs */
+            credits = 2 * pEPDist->TxCreditsSeek;
+        } else {
+                /* give what we can */
+            credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+        }
+
+        if (credits >= pEPDist->TxCreditsSeek) {
+                /* we found some to fullfill the seek request */
+            break;
+        }
+
+        /* we don't have enough in the free pool, try taking away from lower priority services
+         *
+         * The rule for taking away credits:
+         *   1. Only take from lower priority endpoints
+         *   2. Only take what is allocated above the minimum (never starve an endpoint completely)
+         *   3. Only take what you need.
+         *
+         * */
+
+            /* starting at the lowest priority */
+        pCurEpDist = pCredInfo->pLowestPriEpDist;
+
+            /* work backwards until we hit the endpoint again */
+        while (pCurEpDist != pEPDist) {
+                /* calculate how many we need so far */
+            need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits;
+
+            if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) {
+                    /* the current one has been allocated more than it's minimum and it
+                     * has enough credits assigned above it's minimum to fullfill our need
+                     * try to take away just enough to fullfill our need */
+                ReduceCredits(pCredInfo,
+                              pCurEpDist,
+                              pCurEpDist->TxCreditsAssigned - need);
+
+                if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) {
+                        /* we have enough */
+                    break;
+                }
+            }
+
+            pCurEpDist = pCurEpDist->pPrev;
+        }
+
+            /* return what we can get */
+        credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+
+    } while (FALSE);
+
+        /* did we find some credits? */
+    if (credits) {
+            /* give what we can */
+        GiveCredits(pCredInfo, pEPDist, credits);
+    }
+
+}
+
+/* initialize and setup credit distribution */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo)
+{
+    HTC_SERVICE_ID servicepriority[5];
+
+    A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO));
+
+    servicepriority[0] = WMI_CONTROL_SVC;  /* highest */
+    servicepriority[1] = WMI_DATA_VO_SVC;
+    servicepriority[2] = WMI_DATA_VI_SVC;
+    servicepriority[3] = WMI_DATA_BE_SVC;
+    servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
+
+        /* set callbacks and priority list */
+    HTCSetCreditDistribution(HTCHandle,
+                             pCredInfo,
+                             ar6000_credit_distribute,
+                             ar6000_credit_init,
+                             servicepriority,
+                             5);
+
+    return A_OK;
+}
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_node.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_node.c
new file mode 100644
index 0000000..b124845
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_node.c
@@ -0,0 +1,371 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $
+ */
+/*
+ * IEEE 802.11 node handling support.
+ */
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include <a_debug.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+#include <ieee80211_node.h>
+#include <htc_api.h>
+#include <wmi.h>
+#include <wmi_api.h>
+
+static void wlan_node_timeout(A_ATH_TIMER arg);
+static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt,
+                                    const A_UINT8 *macaddr);
+
+bss_t *
+wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size)
+{
+    bss_t *ni;
+
+    ni = A_MALLOC_NOWAIT(sizeof(bss_t));
+
+    if (ni != NULL) {
+        ni->ni_buf = A_MALLOC_NOWAIT(wh_size);
+        if (ni->ni_buf == NULL) {
+            A_FREE(ni);
+            ni = NULL;
+            return ni;
+        }
+    } else {
+        return ni;
+    }
+
+    /* Make sure our lists are clean */
+    ni->ni_list_next = NULL;
+    ni->ni_list_prev = NULL;
+    ni->ni_hash_next = NULL;
+    ni->ni_hash_prev = NULL;
+
+    //
+    // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified
+    // that some junk has been stored in this, due to this scan list didn't properly updated
+    //
+    ni->ni_scangen	 = 0;
+
+    return ni;
+}
+
+void
+wlan_node_free(bss_t *ni)
+{
+    if (ni->ni_buf != NULL) {
+        A_FREE(ni->ni_buf);
+    }
+    A_FREE(ni);
+}
+
+void
+wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+                const A_UINT8 *macaddr)
+{
+    int hash;
+
+    A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN);
+    hash = IEEE80211_NODE_HASH(macaddr);
+    ieee80211_node_initref(ni);     /* mark referenced */
+
+    ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC);
+    IEEE80211_NODE_LOCK_BH(nt);
+
+    /* Insert at the end of the node list */
+    ni->ni_list_next = NULL;
+    ni->ni_list_prev = nt->nt_node_last;
+    if(nt->nt_node_last != NULL)
+    {
+        nt->nt_node_last->ni_list_next = ni;
+    }
+    nt->nt_node_last = ni;
+    if(nt->nt_node_first == NULL)
+    {
+        nt->nt_node_first = ni;
+    }
+
+    /* Insert into the hash list i.e. the bucket */
+    if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL)
+    {
+        nt->nt_hash[hash]->ni_hash_prev = ni;
+    }
+    ni->ni_hash_prev = NULL;
+    nt->nt_hash[hash] = ni;
+
+    if (!nt->isTimerArmed) {
+        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+        nt->isTimerArmed = TRUE;
+    }
+
+    IEEE80211_NODE_UNLOCK_BH(nt);
+}
+
+static bss_t *
+_ieee80211_find_node(struct ieee80211_node_table *nt,
+    const A_UINT8 *macaddr)
+{
+    bss_t *ni;
+    int hash;
+
+    IEEE80211_NODE_LOCK_ASSERT(nt);
+
+    hash = IEEE80211_NODE_HASH(macaddr);
+    for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) {
+        if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
+            ieee80211_node_incref(ni);  /* mark referenced */
+            return ni;
+        }
+    }
+    return NULL;
+}
+
+bss_t *
+wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr)
+{
+    bss_t *ni;
+
+    IEEE80211_NODE_LOCK(nt);
+    ni = _ieee80211_find_node(nt, macaddr);
+    IEEE80211_NODE_UNLOCK(nt);
+    return ni;
+}
+
+/*
+ * Reclaim a node.  If this is the last reference count then
+ * do the normal free work.  Otherwise remove it from the node
+ * table and mark it gone by clearing the back-reference.
+ */
+void
+wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni)
+{
+    IEEE80211_NODE_LOCK(nt);
+
+    if(ni->ni_list_prev == NULL)
+    {
+        /* First in list so fix the list head */
+        nt->nt_node_first = ni->ni_list_next;
+    }
+    else
+    {
+        ni->ni_list_prev->ni_list_next = ni->ni_list_next;
+    }
+
+    if(ni->ni_list_next == NULL)
+    {
+        /* Last in list so fix list tail */
+        nt->nt_node_last = ni->ni_list_prev;
+    }
+    else
+    {
+        ni->ni_list_next->ni_list_prev = ni->ni_list_prev;
+    }
+
+    if(ni->ni_hash_prev == NULL)
+    {
+        /* First in list so fix the list head */
+        int hash;
+        hash = IEEE80211_NODE_HASH(ni->ni_macaddr);
+        nt->nt_hash[hash] = ni->ni_hash_next;
+    }
+    else
+    {
+        ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next;
+    }
+
+    if(ni->ni_hash_next != NULL)
+    {
+        ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev;
+    }
+    wlan_node_free(ni);
+
+    IEEE80211_NODE_UNLOCK(nt);
+}
+
+static void
+wlan_node_dec_free(bss_t *ni)
+{
+    if (ieee80211_node_dectestref(ni)) {
+        wlan_node_free(ni);
+    }
+}
+
+void
+wlan_free_allnodes(struct ieee80211_node_table *nt)
+{
+    bss_t *ni;
+
+    while ((ni = nt->nt_node_first) != NULL) {
+        wlan_node_reclaim(nt, ni);
+    }
+}
+
+void
+wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+                   void *arg)
+{
+    bss_t *ni;
+    A_UINT32 gen;
+
+    gen = ++nt->nt_scangen;
+
+    IEEE80211_NODE_LOCK(nt);
+    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+        if (ni->ni_scangen != gen) {
+            ni->ni_scangen = gen;
+            (void) ieee80211_node_incref(ni);
+            (*f)(arg, ni);
+            wlan_node_dec_free(ni);
+        }
+    }
+    IEEE80211_NODE_UNLOCK(nt);
+}
+
+/*
+ * Node table support.
+ */
+void
+wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt)
+{
+    int i;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt));
+    IEEE80211_NODE_LOCK_INIT(nt);
+
+    nt->nt_node_first = nt->nt_node_last = NULL;
+    for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++)
+    {
+        nt->nt_hash[i] = NULL;
+    }
+    A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt);
+    nt->isTimerArmed = FALSE;
+    nt->nt_wmip = wmip;
+}
+
+static void
+wlan_node_timeout(A_ATH_TIMER arg)
+{
+    struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg;
+    bss_t *bss, *nextBss;
+    A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE;
+
+    wmi_get_current_bssid(nt->nt_wmip, myBssid);
+
+    bss = nt->nt_node_first;
+    while (bss != NULL)
+    {
+        nextBss = bss->ni_list_next;
+        if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0)
+        {
+
+            if (bss->ni_tstamp <= A_GET_MS(0))
+            {
+               /*
+                * free up all but the current bss - if set
+                */
+                wlan_node_reclaim(nt, bss);
+            }
+            else
+            {
+                /*
+                 * Re-arm timer, only when we have a bss other than
+                 * current bss AND it is not aged-out.
+                 */
+                reArmTimer = TRUE;
+            }
+        }
+        bss = nextBss;
+    }
+
+    if(reArmTimer)
+        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+
+    nt->isTimerArmed = reArmTimer;
+}
+
+void
+wlan_node_table_cleanup(struct ieee80211_node_table *nt)
+{
+    A_UNTIMEOUT(&nt->nt_inact_timer);
+    A_DELETE_TIMER(&nt->nt_inact_timer);
+    wlan_free_allnodes(nt);
+    IEEE80211_NODE_LOCK_DESTROY(nt);
+}
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+					A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+    bss_t   *ni = NULL;
+	A_UCHAR *pIESsid = NULL;
+
+    IEEE80211_NODE_LOCK (nt);
+
+    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+		pIESsid = ni->ni_cie.ie_ssid;
+		if (pIESsid[1] <= 32) {
+
+			// Step 1 : Check SSID
+			if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) {
+
+				// Step 2 : if SSID matches, check WPA or WPA2
+				if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) {
+					ieee80211_node_incref (ni);  /* mark referenced */
+					IEEE80211_NODE_UNLOCK (nt);
+					return ni;
+				}
+				if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) {
+					ieee80211_node_incref(ni);  /* mark referenced */
+					IEEE80211_NODE_UNLOCK (nt);
+					return ni;
+				}
+			}
+		}
+    }
+
+    IEEE80211_NODE_UNLOCK (nt);
+
+    return NULL;
+}
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni)
+{
+	IEEE80211_NODE_LOCK (nt);
+	wlan_node_dec_free (ni);
+	IEEE80211_NODE_UNLOCK (nt);
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_recv_beacon.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_recv_beacon.c
new file mode 100644
index 0000000..15beabb
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_recv_beacon.c
@@ -0,0 +1,192 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ * IEEE 802.11 input handling.
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include <wmi.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+
+#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do {         \
+    if ((_len) < (_minlen)) {                   \
+        return A_EINVAL;                         \
+    }                               \
+} while (0)
+
+#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do {         \
+    if ((__elem) == NULL) {                     \
+        return A_EINVAL;                         \
+    }                               \
+    if ((__elem)[1] > (__maxlen)) {                 \
+        return A_EINVAL;                         \
+    }                               \
+} while (0)
+
+
+/* unaligned little endian access */
+#define LE_READ_2(p)                            \
+    ((A_UINT16)                            \
+     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8)))
+
+#define LE_READ_4(p)                            \
+    ((A_UINT32)                            \
+     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8) | \
+      (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24)))
+
+
+static int __inline
+iswpaoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
+}
+
+static int __inline
+iswmmoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI);
+}
+
+static int __inline
+iswmmparam(const A_UINT8 *frm)
+{
+    return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE;
+}
+
+static int __inline
+iswmminfo(const A_UINT8 *frm)
+{
+    return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE;
+}
+
+static int __inline
+isatherosoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
+}
+
+static int __inline
+iswscoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI);
+}
+
+A_STATUS
+wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie)
+{
+    A_UINT8 *frm, *efrm;
+
+    frm = buf;
+    efrm = (A_UINT8 *) (frm + framelen);
+
+    /*
+     * beacon/probe response frame format
+     *  [8] time stamp
+     *  [2] beacon interval
+     *  [2] capability information
+     *  [tlv] ssid
+     *  [tlv] supported rates
+     *  [tlv] country information
+     *  [tlv] parameter set (FH/DS)
+     *  [tlv] erp information
+     *  [tlv] extended supported rates
+     *  [tlv] WMM
+     *  [tlv] WPA or RSN
+     *  [tlv] Atheros Advanced Capabilities
+     */
+    IEEE80211_VERIFY_LENGTH(efrm - frm, 12);
+    A_MEMZERO(cie, sizeof(*cie));
+
+    cie->ie_tstamp = frm; frm += 8;
+    cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
+    cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
+    cie->ie_chan = 0;
+
+    while (frm < efrm) {
+        switch (*frm) {
+        case IEEE80211_ELEMID_SSID:
+            cie->ie_ssid = frm;
+            break;
+        case IEEE80211_ELEMID_RATES:
+            cie->ie_rates = frm;
+            break;
+        case IEEE80211_ELEMID_COUNTRY:
+            cie->ie_country = frm;
+            break;
+        case IEEE80211_ELEMID_FHPARMS:
+            break;
+        case IEEE80211_ELEMID_DSPARMS:
+            cie->ie_chan = frm[2];
+            break;
+        case IEEE80211_ELEMID_TIM:
+            cie->ie_tim = frm;
+            break;
+        case IEEE80211_ELEMID_IBSSPARMS:
+            break;
+        case IEEE80211_ELEMID_XRATES:
+            cie->ie_xrates = frm;
+            break;
+        case IEEE80211_ELEMID_ERP:
+            if (frm[1] != 1) {
+                //A_PRINTF("Discarding ERP Element - Bad Len\n");
+                return A_EINVAL;
+            }
+            cie->ie_erp = frm[2];
+            break;
+        case IEEE80211_ELEMID_RSN:
+            cie->ie_rsn = frm;
+            break;
+        case IEEE80211_ELEMID_VENDOR:
+            if (iswpaoui(frm)) {
+                cie->ie_wpa = frm;
+            } else if (iswmmoui(frm)) {
+                cie->ie_wmm = frm;
+            } else if (isatherosoui(frm)) {
+                cie->ie_ath = frm;
+            } else if(iswscoui(frm)) {
+                cie->ie_wsc = frm;
+            }
+            break;
+        default:
+            break;
+        }
+        frm += frm[1] + 2;
+    }
+    IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE);
+    IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN);
+
+    return A_OK;
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_utils.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_utils.c
new file mode 100644
index 0000000..fd5aac9
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wlan/wlan_utils.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements frequently used wlan utilies
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+
+/*
+ * converts ieee channel number to frequency
+ */
+A_UINT16
+wlan_ieee2freq(int chan)
+{
+    if (chan == 14) {
+        return 2484;
+    }
+    if (chan < 14) {    /* 0-13 */
+        return (2407 + (chan*5));
+    }
+    if (chan < 27) {    /* 15-26 */
+        return (2512 + ((chan-15)*20));
+    }
+    return (5000 + (chan*5));
+}
+
+/*
+ * Converts MHz frequency to IEEE channel number.
+ */
+A_UINT32
+wlan_freq2ieee(A_UINT16 freq)
+{
+    if (freq == 2484)
+        return 14;
+    if (freq < 2484)
+        return (freq - 2407) / 5;
+    if (freq < 5000)
+        return 15 + ((freq - 2512) / 20);
+    return (freq - 5000) / 5;
+}
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi.c
new file mode 100644
index 0000000..d322cf3
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi.c
@@ -0,0 +1,3954 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements the hardware independent layer of the
+ * Wireless Module Interface (WMI) protocol.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include "htc.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include <ieee80211.h>
+#include <ieee80211_node.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "dset_api.h"
+#include "gpio_api.h"
+#include "wmi_host.h"
+#include "a_drv.h"
+#include "a_drv_api.h"
+#include "a_debug.h"
+#include "dbglog_api.h"
+
+static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                        int len);
+static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                        int len);
+static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                       int len);
+static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_sync_point(struct wmi_t *wmip);
+
+static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                         int len);
+static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                       int len);
+static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                             int len);
+
+static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+
+static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len);
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex);
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+int wps_enable;
+static const A_INT32 wmi_rateTable[] = {
+    1000,
+    2000,
+    5500,
+    11000,
+    6000,
+    9000,
+    12000,
+    18000,
+    24000,
+    36000,
+    48000,
+    54000,
+    0};
+
+#define MODE_A_SUPPORT_RATE_START       4
+#define MODE_A_SUPPORT_RATE_STOP        11
+
+#define MODE_GONLY_SUPPORT_RATE_START   MODE_A_SUPPORT_RATE_START
+#define MODE_GONLY_SUPPORT_RATE_STOP    MODE_A_SUPPORT_RATE_STOP
+
+#define MODE_B_SUPPORT_RATE_START       0
+#define MODE_B_SUPPORT_RATE_STOP        3
+
+#define MODE_G_SUPPORT_RATE_START       0
+#define MODE_G_SUPPORT_RATE_STOP        11
+
+#define MAX_NUMBER_OF_SUPPORT_RATES     (MODE_G_SUPPORT_RATE_STOP + 1)
+
+/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */
+const A_UINT8 up_to_ac[]= {
+                WMM_AC_BE,
+                WMM_AC_BK,
+                WMM_AC_BK,
+                WMM_AC_BE,
+                WMM_AC_VI,
+                WMM_AC_VI,
+                WMM_AC_VO,
+                WMM_AC_VO,
+            };
+
+void *
+wmi_init(void *devt)
+{
+    struct wmi_t *wmip;
+
+    wmip = A_MALLOC(sizeof(struct wmi_t));
+    if (wmip == NULL) {
+        return (NULL);
+    }
+    A_MEMZERO(wmip, sizeof(*wmip));
+    A_MUTEX_INIT(&wmip->wmi_lock);
+    wmip->wmi_devt = devt;
+    wlan_node_table_init(wmip, &wmip->wmi_scan_table);
+    wmi_qos_state_init(wmip);
+    wmip->wmi_powerMode = REC_POWER;
+    wmip->wmi_phyMode = WMI_11G_MODE;
+
+    return (wmip);
+}
+
+void
+wmi_qos_state_init(struct wmi_t *wmip)
+{
+    A_UINT8 i;
+
+    if (wmip == NULL) {
+        return;
+    }
+    LOCK_WMI(wmip);
+
+    /* Initialize QoS States */
+    wmip->wmi_numQoSStream = 0;
+
+    wmip->wmi_fatPipeExists = 0;
+
+    for (i=0; i < WMM_NUM_AC; i++) {
+        wmip->wmi_streamExistsForAC[i]=0;
+    }
+
+        /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */
+    WMI_INIT_WMISTREAM_AC_MAP(wmip);
+
+    UNLOCK_WMI(wmip);
+
+    A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1);
+}
+
+void
+wmi_shutdown(struct wmi_t *wmip)
+{
+    if (wmip != NULL) {
+        wlan_node_table_cleanup(&wmip->wmi_scan_table);
+        if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) {
+            A_MUTEX_DELETE(&wmip->wmi_lock);
+        }
+        A_FREE(wmip);
+    }
+}
+
+/*
+ *  performs DIX to 802.3 encapsulation for transmit packets.
+ *  uses passed in buffer.  Returns buffer or NULL if failed.
+ *  Assumes the entire DIX header is contigous and that there is
+ *  enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
+ */
+A_STATUS
+wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf)
+{
+    A_UINT8          *datap;
+    A_UINT16         typeorlen;
+    ATH_MAC_HDR      macHdr;
+    ATH_LLC_SNAP_HDR *llcHdr;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_HEADROOM(osbuf) <
+        (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR)))
+    {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN);
+
+    if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) {
+        /*
+         * packet is already in 802.3 format - return success
+         */
+        A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG));
+        return (A_OK);
+    }
+
+    /*
+     * Save mac fields and length to be inserted later
+     */
+    A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN);
+    A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN);
+    macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) +
+                                  sizeof(ATH_LLC_SNAP_HDR));
+
+    /*
+     * Make room for LLC+SNAP headers
+     */
+    if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+    llcHdr->dsap      = 0xAA;
+    llcHdr->ssap      = 0xAA;
+    llcHdr->cntl      = 0x03;
+    llcHdr->orgCode[0] = 0x0;
+    llcHdr->orgCode[1] = 0x0;
+    llcHdr->orgCode[2] = 0x0;
+    llcHdr->etherType = typeorlen;
+
+    return (A_OK);
+}
+
+/*
+ * Adds a WMI data header
+ * Assumes there is enough room in the buffer to add header.
+ */
+A_STATUS
+wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType)
+{
+    WMI_DATA_HDR     *dtHdr;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+    dtHdr->info = msgType;
+    dtHdr->rssi = 0;
+
+    return (A_OK);
+}
+
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up)
+{
+    A_UINT8         *datap;
+    A_UINT8         trafficClass = WMM_AC_BE, userPriority = up;
+    ATH_LLC_SNAP_HDR *llcHdr;
+    A_UINT16        ipType = IP_ETHERTYPE;
+    WMI_DATA_HDR     *dtHdr;
+    WMI_CREATE_PSTREAM_CMD  cmd;
+    A_BOOL           streamExists = FALSE;
+
+    A_ASSERT(osbuf != NULL);
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    if (up == UNDEFINED_PRI) {
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) +
+                                  sizeof(ATH_MAC_HDR));
+
+        if (llcHdr->etherType == A_CPU2BE16(ipType)) {
+        /* Extract the endpoint info from the TOS field in the IP header */
+        userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR));
+        }
+    }
+
+    if (userPriority < MAX_NUM_PRI) {
+        trafficClass = convert_userPriority_to_trafficClass(userPriority);
+    }
+
+    dtHdr = (WMI_DATA_HDR *)datap;
+    if(dir==UPLINK_TRAFFIC)
+        dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT;  /* lower 3-bits are 802.1d priority */
+
+    LOCK_WMI(wmip);
+    streamExists = wmip->wmi_fatPipeExists;
+    UNLOCK_WMI(wmip);
+
+    if (!(streamExists & (1 << trafficClass))) {
+
+        A_MEMZERO(&cmd, sizeof(cmd));
+	    cmd.trafficClass = trafficClass;
+	    cmd.userPriority = userPriority;
+		cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT;
+            /* Implicit streams are created with TSID 0xFF */
+        cmd.tsid = WMI_IMPLICIT_PSTREAM;
+        wmi_create_pstream_cmd(wmip, &cmd);
+    }
+
+    return trafficClass;
+}
+
+WMI_PRI_STREAM_ID
+wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+    return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass);
+}
+
+/*
+ *  performs 802.3 to DIX encapsulation for received packets.
+ *  Assumes the entire 802.3 header is contigous.
+ */
+A_STATUS
+wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf)
+{
+    A_UINT8          *datap;
+    ATH_MAC_HDR      macHdr;
+    ATH_LLC_SNAP_HDR *llcHdr;
+
+    A_ASSERT(osbuf != NULL);
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR));
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+    macHdr.typeOrLen = llcHdr->etherType;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+    return (A_OK);
+}
+
+/*
+ * Removes a WMI data header
+ */
+A_STATUS
+wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf)
+{
+    A_ASSERT(osbuf != NULL);
+
+    return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR)));
+}
+
+void
+wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg)
+{
+    wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg);
+}
+
+/*
+ * WMI Extended Event received from Target.
+ */
+A_STATUS
+wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf)
+{
+    WMIX_CMD_HDR *cmd;
+    A_UINT16 id;
+    A_UINT8 *datap;
+    A_UINT32 len;
+    A_STATUS status = A_OK;
+
+    if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    id = cmd->commandId;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+    len = A_NETBUF_LEN(osbuf);
+
+    switch (id) {
+    case (WMIX_DSETOPENREQ_EVENTID):
+        status = wmi_dset_open_req_rx(wmip, datap, len);
+        break;
+#ifdef CONFIG_HOST_DSET_SUPPORT
+    case (WMIX_DSETCLOSE_EVENTID):
+        status = wmi_dset_close_rx(wmip, datap, len);
+        break;
+    case (WMIX_DSETDATAREQ_EVENTID):
+        status = wmi_dset_data_req_rx(wmip, datap, len);
+        break;
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+    case (WMIX_GPIO_INTR_EVENTID):
+        wmi_gpio_intr_rx(wmip, datap, len);
+        break;
+    case (WMIX_GPIO_DATA_EVENTID):
+        wmi_gpio_data_rx(wmip, datap, len);
+        break;
+    case (WMIX_GPIO_ACK_EVENTID):
+        wmi_gpio_ack_rx(wmip, datap, len);
+        break;
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+    case (WMIX_HB_CHALLENGE_RESP_EVENTID):
+        wmi_hbChallengeResp_rx(wmip, datap, len);
+        break;
+    case (WMIX_DBGLOG_EVENTID):
+        wmi_dbglog_event_rx(wmip, datap, len);
+        break;
+    default:
+        A_DPRINTF(DBG_WMI|DBG_ERROR,
+            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+        wmip->wmi_stats.cmd_id_err++;
+        status = A_ERROR;
+        break;
+    }
+
+    return status;
+}
+
+/*
+ * Control Path
+ */
+A_UINT32 cmdRecvNum;
+
+A_STATUS
+wmi_control_rx(struct wmi_t *wmip, void *osbuf)
+{
+    WMI_CMD_HDR *cmd;
+    A_UINT16 id;
+    A_UINT8 *datap;
+    A_UINT32 len, i, loggingReq;
+    A_STATUS status = A_OK;
+
+    A_ASSERT(osbuf != NULL);
+    if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    id = cmd->commandId;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+    len = A_NETBUF_LEN(osbuf);
+
+    ar6000_get_driver_cfg(wmip->wmi_devt,
+                    AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS,
+                    &loggingReq);
+
+    if(loggingReq) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id));
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum));
+        for(i = 0; i < len; i++)
+            AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i]));
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n"));
+    }
+
+    LOCK_WMI(wmip);
+    cmdRecvNum++;
+    UNLOCK_WMI(wmip);
+
+    switch (id) {
+    case (WMI_GET_BITRATE_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG));
+        status = wmi_bitrate_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_CHANNEL_LIST_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG));
+        status = wmi_channelList_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_TX_PWR_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG));
+        status = wmi_txPwr_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_READY_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG));
+        status = wmi_ready_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt);
+        break;
+    case (WMI_CONNECT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG));
+        status = wmi_connect_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_DISCONNECT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG));
+        status = wmi_disconnect_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_TKIP_MICERR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG));
+        status = wmi_tkip_micerr_event_rx(wmip, datap, len);
+        break;
+    case (WMI_BSSINFO_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG));
+        status = wmi_bssInfo_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_REGDOMAIN_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG));
+        status = wmi_regDomain_event_rx(wmip, datap, len);
+        break;
+    case (WMI_PSTREAM_TIMEOUT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG));
+        status = wmi_pstream_timeout_event_rx(wmip, datap, len);
+            /* pstreams are fatpipe abstractions that get implicitly created.
+             * User apps only deal with thinstreams. creation of a thinstream
+             * by the user or data traffic flow in an AC triggers implicit
+             * pstream creation. Do we need to send this event to App..?
+             * no harm in sending it.
+             */
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_NEIGHBOR_REPORT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG));
+        status = wmi_neighborReport_event_rx(wmip, datap, len);
+        break;
+    case (WMI_SCAN_COMPLETE_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG));
+        status = wmi_scanComplete_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_CMDERROR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG));
+        status = wmi_errorEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_STATISTICS_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG));
+        status = wmi_statsEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_RSSI_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_rssiThresholdEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_ERROR_REPORT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG));
+        status = wmi_reportErrorEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_OPT_RX_FRAME_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG));
+        status = wmi_opt_frame_event_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_ROAM_TBL_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG));
+        status = wmi_roam_tbl_event_rx(wmip, datap, len);
+        break;
+    case (WMI_EXTENSION_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG));
+        status = wmi_control_rx_xtnd(wmip, osbuf);
+        break;
+    case (WMI_CAC_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG));
+        status = wmi_cac_event_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_ROAM_DATA_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG));
+        status = wmi_roam_data_event_rx(wmip, datap, len);
+        break;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    case (WMI_TEST_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG));
+        status = wmi_tcmd_test_report_rx(wmip, datap, len);
+        break;
+#endif
+    case (WMI_GET_FIXRATES_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG));
+        status = wmi_ratemask_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_TX_RETRY_ERR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG));
+        status = wmi_txRetryErrEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_SNR_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_snrThresholdEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_LQ_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_lqThresholdEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_APLIST_EVENTID):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n"));
+        status = wmi_aplistEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_KEEPALIVE_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG));
+        status = wmi_keepalive_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_WOW_LIST_EVENTID):
+        status = wmi_get_wow_list_event_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_PMKID_LIST_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG));
+        status = wmi_get_pmkid_list_event_rx(wmip, datap, len);
+        break;
+    default:
+        A_DPRINTF(DBG_WMI|DBG_ERROR,
+            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+        wmip->wmi_stats.cmd_id_err++;
+        status = A_ERROR;
+        break;
+    }
+
+    A_NETBUF_FREE(osbuf);
+
+    return status;
+}
+
+static A_STATUS
+wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap;
+
+    if (len < sizeof(WMI_READY_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+    wmip->wmi_ready = TRUE;
+    A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CONNECT_EVENT *ev;
+
+    if (len < sizeof(WMI_CONNECT_EVENT)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_CONNECT_EVENT *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+        DBGARG, ev->channel,
+        ev->bssid[0], ev->bssid[1], ev->bssid[2],
+        ev->bssid[3], ev->bssid[4], ev->bssid[5]));
+
+    A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN);
+
+    A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid,
+                         ev->listenInterval, ev->beaconInterval,
+                         ev->networkType, ev->beaconIeLen,
+                         ev->assocReqLen, ev->assocRespLen,
+                         ev->assocInfo);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_REG_DOMAIN_EVENT *ev;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_REG_DOMAIN_EVENT *)datap;
+
+    A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_NEIGHBOR_REPORT_EVENT *ev;
+    int numAps;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap;
+    numAps = ev->numberOfAps;
+
+    if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) {
+        return A_EINVAL;
+    }
+
+    A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_DISCONNECT_EVENT *ev;
+
+    if (len < sizeof(WMI_DISCONNECT_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    ev = (WMI_DISCONNECT_EVENT *)datap;
+
+    A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid));
+
+    A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid,
+                            ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TKIP_MICERR_EVENT *ev;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    ev = (WMI_TKIP_MICERR_EVENT *)datap;
+    A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    bss_t *bss;
+    WMI_BSS_INFO_HDR *bih;
+    A_UINT8 *buf;
+    A_UINT32 nodeCachingAllowed;
+
+    if (len <= sizeof(WMI_BSS_INFO_HDR)) {
+        return A_EINVAL;
+    }
+
+    A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len);
+    /* What is driver config for wlan node caching? */
+    if(ar6000_get_driver_cfg(wmip->wmi_devt,
+                    AR6000_DRIVER_CFG_GET_WLANNODECACHING,
+                    &nodeCachingAllowed) != A_OK) {
+        return A_EINVAL;
+    }
+
+    if(!nodeCachingAllowed) {
+        return A_OK;
+    }
+
+
+    bih = (WMI_BSS_INFO_HDR *)datap;
+    buf = datap + sizeof(WMI_BSS_INFO_HDR);
+    len -= sizeof(WMI_BSS_INFO_HDR);
+
+    A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, "
+              "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG,
+              bih->channel, (unsigned char) bih->rssi, bih->bssid[0],
+              bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4],
+              bih->bssid[5]));
+
+    if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) {
+	    printk("%s() A_OK 2\n", __FUNCTION__);
+		return A_OK;
+    }
+
+    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+    if (bss != NULL) {
+        /*
+         * Free up the node.  Not the most efficient process given
+         * we are about to allocate a new node but it is simple and should be
+         * adequate.
+         */
+        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+    }
+
+    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+    if (bss == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    bss->ni_snr        = bih->snr;
+    bss->ni_rssi       = bih->rssi;
+    A_ASSERT(bss->ni_buf != NULL);
+    A_MEMCPY(bss->ni_buf, buf, len);
+
+    if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) {
+        wlan_node_free(bss);
+        return A_EINVAL;
+    }
+
+    /*
+     * Update the frequency in ie_chan, overwriting of channel number
+     * which is done in wlan_parse_beacon
+     */
+    bss->ni_cie.ie_chan = bih->channel;
+    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    bss_t *bss;
+    WMI_OPT_RX_INFO_HDR *bih;
+    A_UINT8 *buf;
+
+    if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) {
+        return A_EINVAL;
+    }
+
+    bih = (WMI_OPT_RX_INFO_HDR *)datap;
+    buf = datap + sizeof(WMI_OPT_RX_INFO_HDR);
+    len -= sizeof(WMI_OPT_RX_INFO_HDR);
+
+    A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG,
+        bih->bssid[4], bih->bssid[5]));
+
+    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+    if (bss != NULL) {
+        /*
+         * Free up the node.  Not the most efficient process given
+         * we are about to allocate a new node but it is simple and should be
+         * adequate.
+         */
+        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+    }
+
+    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+    if (bss == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    bss->ni_snr        = bih->snr;
+    bss->ni_cie.ie_chan = bih->channel;
+    A_ASSERT(bss->ni_buf != NULL);
+    A_MEMCPY(bss->ni_buf, buf, len);
+    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+    return A_OK;
+}
+
+    /* This event indicates inactivity timeout of a fatpipe(pstream)
+     * at the target
+     */
+static A_STATUS
+wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_PSTREAM_TIMEOUT_EVENT *ev;
+
+    if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) {
+        return A_EINVAL;
+    }
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG));
+
+    ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap;
+
+        /* When the pstream (fat pipe == AC) timesout, it means there were no
+         * thinStreams within this pstream & it got implicitly created due to
+         * data flow on this AC. We start the inactivity timer only for
+         * implicitly created pstream. Just reset the host state.
+         */
+        /* Set the activeTsids for this AC to 0 */
+    LOCK_WMI(wmip);
+    wmip->wmi_streamExistsForAC[ev->trafficClass]=0;
+    wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass);
+    UNLOCK_WMI(wmip);
+
+        /*Indicate inactivity to driver layer for this fatpipe (pstream)*/
+    A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_BIT_RATE_CMD *reply;
+    A_INT32 rate;
+
+    if (len < sizeof(WMI_BIT_RATE_CMD)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_BIT_RATE_CMD *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex));
+
+    if (reply->rateIndex == RATE_AUTO) {
+        rate = RATE_AUTO;
+    } else {
+        rate = wmi_rateTable[(A_UINT32) reply->rateIndex];
+    }
+
+    A_WMI_BITRATE_RX(wmip->wmi_devt, rate);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_FIX_RATES_CMD *reply;
+
+    if (len < sizeof(WMI_BIT_RATE_CMD)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_FIX_RATES_CMD *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask));
+
+    A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CHANNEL_LIST_REPLY *reply;
+
+    if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_CHANNEL_LIST_REPLY *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels,
+                          reply->channelList);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TX_PWR_REPLY *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TX_PWR_REPLY *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM);
+
+    return A_OK;
+}
+static A_STATUS
+wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_GET_KEEPALIVE_CMD *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_GET_KEEPALIVE_CMD *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured);
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETOPENREQ_EVENT *dsetopenreq;
+
+    if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) {
+        return A_EINVAL;
+    }
+    dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id));
+    A_WMI_DSET_OPEN_REQ(wmip->wmi_devt,
+                        dsetopenreq->dset_id,
+                        dsetopenreq->targ_dset_handle,
+                        dsetopenreq->targ_reply_fn,
+                        dsetopenreq->targ_reply_arg);
+
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS
+wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETCLOSE_EVENT *dsetclose;
+
+    if (len < sizeof(WMIX_DSETCLOSE_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    dsetclose = (WMIX_DSETCLOSE_EVENT *)datap;
+    A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETDATAREQ_EVENT *dsetdatareq;
+
+    if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap;
+    A_WMI_DSET_DATA_REQ(wmip->wmi_devt,
+                         dsetdatareq->access_cookie,
+                         dsetdatareq->offset,
+                         dsetdatareq->length,
+                         dsetdatareq->targ_buf,
+                         dsetdatareq->targ_reply_fn,
+                         dsetdatareq->targ_reply_arg);
+
+    return A_OK;
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+static A_STATUS
+wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_SCAN_COMPLETE_EVENT *ev;
+
+    ev = (WMI_SCAN_COMPLETE_EVENT *)datap;
+    A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status);
+
+    return A_OK;
+}
+
+/*
+ * Target is reporting a programming error.  This is for
+ * developer aid only.  Target only checks a few common violations
+ * and it is responsibility of host to do all error checking.
+ * Behavior of target after wmi error event is undefined.
+ * A reset is recommended.
+ */
+static A_STATUS
+wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CMD_ERROR_EVENT *ev;
+
+    ev = (WMI_CMD_ERROR_EVENT *)datap;
+    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId));
+    switch (ev->errorCode) {
+    case (INVALID_PARAM):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n"));
+        break;
+    case (ILLEGAL_STATE):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n"));
+        break;
+    case (INTERNAL_ERROR):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n"));
+        break;
+    }
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_STATS *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_STATS *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_RSSI_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_RSSI_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi);
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ERROR_REPORT_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CAC_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_CAC_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac,
+                reply->cac_indication, reply->statusCode,
+                reply->tspecSuggestion);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_HB_CHALLENGE_RESP_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG));
+
+    A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ROAM_TBL *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ROAM_TBL *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ROAM_DATA *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ROAM_DATA *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TX_RETRY_ERR_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TX_RETRY_ERR_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_SNR_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_SNR_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_LQ_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_LQ_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_UINT16 ap_info_entry_size;
+    WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap;
+    WMI_AP_INFO_V1 *ap_info_v1;
+    A_UINT8 i;
+
+    if (len < sizeof(WMI_APLIST_EVENT)) {
+        return A_EINVAL;
+    }
+
+    if (ev->apListVer == APLIST_VER1) {
+        ap_info_entry_size = sizeof(WMI_AP_INFO_V1);
+        ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList;
+    } else {
+        return A_EINVAL;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP));
+    if (len < (int)(sizeof(WMI_APLIST_EVENT) +
+              (ev->numAP - 1) * ap_info_entry_size))
+    {
+        return A_EINVAL;
+    }
+
+    /*
+     * AP List Ver1 Contents
+     */
+    for (i = 0; i < ev->numAP; i++) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\
+                    "Channel %d\n", i,
+                   ap_info_v1->bssid[0], ap_info_v1->bssid[1],
+                   ap_info_v1->bssid[2], ap_info_v1->bssid[3],
+                   ap_info_v1->bssid[4], ap_info_v1->bssid[5],
+                   ap_info_v1->channel));
+        ap_info_v1++;
+    }
+    return A_OK;
+}
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_UINT32 dropped;
+
+    dropped = *((A_UINT32 *)datap);
+    datap += sizeof(dropped);
+    len -= sizeof(dropped);
+    A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len);
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS
+wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG,
+        gpio_intr->intr_mask, gpio_intr->input_values));
+
+    A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG,
+        gpio_data->reg_id, gpio_data->value));
+
+    A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_GPIO_ACK_RX();
+
+    return A_OK;
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+/*
+ * Called to send a wmi command. Command specific data is already built
+ * on osbuf and current osbuf->data points to it.
+ */
+A_STATUS
+wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+               WMI_SYNC_FLAG syncflag)
+{
+#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID))
+    WMI_CMD_HDR         *cHdr;
+    WMI_PRI_STREAM_ID   streamID = WMI_CONTROL_PRI;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (syncflag >= END_WMIFLAG) {
+        return A_EINVAL;
+    }
+
+    if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+        /*
+         * We want to make sure all data currently queued is transmitted before
+         * the cmd execution.  Establish a new sync point.
+         */
+        wmi_sync_point(wmip);
+    }
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    cHdr->commandId = cmdId;
+
+    /*
+     * Send cmd, some via control pipe, others via data pipe
+     */
+    if (IS_LONG_CMD(cmdId)) {
+        wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE);
+        // TODO ... these can now go through the control endpoint via HTC 2.0
+        streamID = WMI_BEST_EFFORT_PRI;
+    }
+    A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID);
+
+    if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+        /*
+         * We want to make sure all new data queued waits for the command to
+         * execute. Establish a new sync point.
+         */
+        wmi_sync_point(wmip);
+    }
+    return (A_OK);
+#undef IS_LONG_CMD
+}
+
+A_STATUS
+wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+                  WMI_SYNC_FLAG syncflag)
+{
+    WMIX_CMD_HDR     *cHdr;
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    cHdr->commandId = cmdId;
+
+    return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag);
+}
+
+A_STATUS
+wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType,
+                DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode,
+                CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen,
+                CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen,
+                int ssidLength, A_UCHAR *ssid,
+                A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags)
+{
+    void *osbuf;
+    WMI_CONNECT_CMD *cc;
+
+    if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) {
+        return A_EINVAL;
+    }
+    if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD));
+
+    cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cc, sizeof(*cc));
+
+    A_MEMCPY(cc->ssid, ssid, ssidLength);
+    cc->ssidLength          = ssidLength;
+    cc->networkType         = netType;
+    cc->dot11AuthMode       = dot11AuthMode;
+    cc->authMode            = authMode;
+    cc->pairwiseCryptoType  = pairwiseCrypto;
+    cc->pairwiseCryptoLen   = pairwiseCryptoLen;
+    cc->groupCryptoType     = groupCrypto;
+    cc->groupCryptoLen      = groupCryptoLen;
+    cc->channel             = channel;
+    cc->ctrl_flags          = ctrl_flags;
+
+    if (bssid != NULL) {
+        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+    }
+    if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) {
+        return(A_ERROR);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel)
+{
+    void *osbuf;
+    WMI_RECONNECT_CMD *cc;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD));
+
+    cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cc, sizeof(*cc));
+
+    cc->channel = channel;
+
+    if (bssid != NULL) {
+        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disconnect_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+    A_STATUS status;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    /* Bug fix for 24817(elevator bug) - the disconnect command does not
+       need to do a SYNC before.*/
+    status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID,
+                         NO_SYNC_WMIFLAG));
+
+    return status;
+}
+
+A_STATUS
+wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+                  A_BOOL forceFgScan, A_BOOL isLegacy,
+                  A_UINT32 homeDwellTime, A_UINT32 forceScanInterval)
+{
+    void *osbuf;
+    WMI_START_SCAN_CMD *sc;
+
+    if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+    sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf));
+    sc->scanType = scanType;
+    sc->forceFgScan = forceFgScan;
+    sc->isLegacy = isLegacy;
+    sc->homeDwellTime = homeDwellTime;
+    sc->forceScanInterval = forceScanInterval;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+                   A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+                   A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec,
+                   A_UINT16 pas_chdw_msec,
+                   A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+                   A_UINT32 max_dfsch_act_time)
+{
+    void *osbuf;
+    WMI_SCAN_PARAMS_CMD *sc;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+    sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(sc, sizeof(*sc));
+    sc->fg_start_period  = fg_start_sec;
+    sc->fg_end_period    = fg_end_sec;
+    sc->bg_period        = bg_sec;
+    sc->minact_chdwell_time = minact_chdw_msec;
+    sc->maxact_chdwell_time = maxact_chdw_msec;
+    sc->pas_chdwell_time = pas_chdw_msec;
+    sc->shortScanRatio   = shScanRatio;
+    sc->scanCtrlFlags    = scanCtrlFlags;
+    sc->max_dfsch_act_time = max_dfsch_act_time;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask)
+{
+    void *osbuf;
+    WMI_BSS_FILTER_CMD *cmd;
+
+    if (filter >= LAST_BSS_FILTER) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->bssFilter = filter;
+    cmd->ieMask = ieMask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+                   A_UINT8 ssidLength, A_UCHAR *ssid)
+{
+    void *osbuf;
+    WMI_PROBED_SSID_CMD *cmd;
+
+    if (index > MAX_PROBED_SSID_INDEX) {
+        return A_EINVAL;
+    }
+    if (ssidLength > sizeof(cmd->ssid)) {
+        return A_EINVAL;
+    }
+    if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) {
+        return A_EINVAL;
+    }
+    if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->entryIndex = index;
+    cmd->flag       = flag;
+    cmd->ssidLength = ssidLength;
+    A_MEMCPY(cmd->ssid, ssid, ssidLength);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons)
+{
+    void *osbuf;
+    WMI_LISTEN_INT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->listenInterval = listenInterval;
+    cmd->numBeacons = listenBeacons;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons)
+{
+    void *osbuf;
+    WMI_BMISS_TIME_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->bmissTime = bmissTime;
+    cmd->numBeacons =  bmissBeacons;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+                     A_UINT8 ieLen, A_UINT8 *ieInfo)
+{
+    void *osbuf;
+    WMI_SET_ASSOC_INFO_CMD *cmd;
+    A_UINT16 cmdLen;
+
+    cmdLen = sizeof(*cmd) + ieLen - 1;
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+
+    cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, cmdLen);
+    cmd->ieType = ieType;
+    cmd->bufferSize = ieLen;
+    A_MEMCPY(cmd->assocInfo, ieInfo, ieLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode)
+{
+    void *osbuf;
+    WMI_POWER_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->powerMode = powerMode;
+    wmip->wmi_powerMode = powerMode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+                   A_UINT16 atim_windows, A_UINT16 timeout_value)
+{
+    void *osbuf;
+    WMI_IBSS_PM_CAPS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->power_saving = pmEnable;
+    cmd->ttl = ttl;
+    cmd->atim_windows = atim_windows;
+    cmd->timeout_value = timeout_value;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+                 A_UINT16 psPollNum, A_UINT16 dtimPolicy)
+{
+    void *osbuf;
+    WMI_POWER_PARAMS_CMD *pm;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*pm));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*pm));
+
+    pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(pm, sizeof(*pm));
+    pm->idle_period   = idlePeriod;
+    pm->pspoll_number = psPollNum;
+    pm->dtim_policy   = dtimPolicy;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout)
+{
+    void *osbuf;
+    WMI_DISC_TIMEOUT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->disconnectTimeout = timeout;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType,
+               A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC,
+               A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+               WMI_SYNC_FLAG sync_flag)
+{
+    void *osbuf;
+    WMI_ADD_CIPHER_KEY_CMD *cmd;
+
+    if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) ||
+        (keyMaterial == NULL))
+    {
+        return A_EINVAL;
+    }
+
+    if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keyIndex = keyIndex;
+    cmd->keyType  = keyType;
+    cmd->keyUsage = keyUsage;
+    cmd->keyLength = keyLength;
+    A_MEMCPY(cmd->key, keyMaterial, keyLength);
+    if (NULL != keyRSC) {
+        A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC));
+    }
+    cmd->key_op_ctrl = key_op_ctrl;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag));
+}
+
+A_STATUS
+wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk)
+{
+    void *osbuf;
+    WMI_ADD_KRK_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_krk_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex)
+{
+    void *osbuf;
+    WMI_DELETE_CIPHER_KEY_CMD *cmd;
+
+    if (keyIndex > WMI_MAX_KEY_INDEX) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keyIndex = keyIndex;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+                 A_BOOL set)
+{
+    void *osbuf;
+    WMI_SET_PMKID_CMD *cmd;
+
+    if (bssid == NULL) {
+        return A_EINVAL;
+    }
+
+    if ((set == TRUE) && (pmkId == NULL)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+    if (set == TRUE) {
+        A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid));
+        cmd->enable = PMKID_ENABLE;
+    } else {
+        A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid));
+        cmd->enable = PMKID_DISABLE;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en)
+{
+    void *osbuf;
+    WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+                        WMI_SET_AKMP_PARAMS_CMD *akmpParams)
+{
+    void *osbuf;
+    WMI_SET_AKMP_PARAMS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+    cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->akmpInfo = akmpParams->akmpInfo;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+                       WMI_SET_PMKID_LIST_CMD *pmkInfo)
+{
+    void *osbuf;
+    WMI_SET_PMKID_LIST_CMD *cmd;
+    A_UINT16 cmdLen;
+    A_UINT8 i;
+
+    cmdLen = sizeof(pmkInfo->numPMKID) +
+             pmkInfo->numPMKID * sizeof(WMI_PMKID);
+
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+    cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->numPMKID = pmkInfo->numPMKID;
+
+    for (i = 0; i < cmd->numPMKID; i++) {
+        A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i],
+                 WMI_PMKID_LEN);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_pmkid_list_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+    WMI_DATA_HDR     *dtHdr;
+
+    A_ASSERT(streamID != WMI_CONTROL_PRI);
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+    dtHdr->info =
+      (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID));
+
+    return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID));
+}
+
+typedef struct _WMI_DATA_SYNC_BUFS {
+    A_UINT8            trafficClass;
+    void               *osbuf;
+}WMI_DATA_SYNC_BUFS;
+
+static A_STATUS
+wmi_sync_point(struct wmi_t *wmip)
+{
+	void *cmd_osbuf;
+    WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC];
+	A_UINT8 i,numPriStreams=0;
+	A_STATUS status;
+
+	A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    memset(dataSyncBufs,0,sizeof(dataSyncBufs));
+
+    /* lock out while we walk through the priority list and assemble our local array */
+    LOCK_WMI(wmip);
+
+    for (i=0; i < WMM_NUM_AC ; i++) {
+		if (wmip->wmi_fatPipeExists & (1 << i)) {
+            numPriStreams++;
+            dataSyncBufs[numPriStreams-1].trafficClass = i;
+        }
+    }
+
+    UNLOCK_WMI(wmip);
+
+    /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */
+
+    do {
+	    /*
+	     * We allocate all network buffers needed so we will be able to
+	     * send all required frames.
+	     */
+	    cmd_osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+	    if (cmd_osbuf == NULL) {
+		    status = A_NO_MEMORY;
+            break;
+	    }
+
+	    for (i=0; i < numPriStreams ; i++) {
+	        dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0);
+            if (dataSyncBufs[i].osbuf == NULL) {
+                status = A_NO_MEMORY;
+                break;
+            }
+	    } //end for
+
+	    /*
+	     * Send sync cmd followed by sync data messages on all endpoints being
+	     * used
+	     */
+	    status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID,
+						  NO_SYNC_WMIFLAG);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+            /* cmd buffer sent, we no longer own it */
+        cmd_osbuf = NULL;
+
+		for(i=0; i < numPriStreams; i++) {
+            A_ASSERT(dataSyncBufs[i].osbuf != NULL);
+
+            status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf,
+                        WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass));
+
+            if (A_FAILED(status)) {
+                break;
+            }
+            /* we don't own this buffer anymore, NULL it out of the array so it
+             * won't get cleaned up */
+            dataSyncBufs[i].osbuf = NULL;
+		} //end for
+
+    } while(FALSE);
+
+    /* free up any resources left over (possibly due to an error) */
+
+    if (cmd_osbuf != NULL) {
+        A_NETBUF_FREE(cmd_osbuf);
+    }
+
+    for (i = 0; i < numPriStreams; i++) {
+        if (dataSyncBufs[i].osbuf != NULL) {
+            A_NETBUF_FREE(dataSyncBufs[i].osbuf);
+        }
+    }
+
+	return (status);
+}
+
+A_STATUS
+wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params)
+{
+    void *osbuf;
+    WMI_CREATE_PSTREAM_CMD *cmd;
+	A_UINT16 activeTsids=0;
+    A_UINT8 fatPipeExistsForAC=0;
+
+    /* Validate all the parameters. */
+    if( !((params->userPriority < 8) &&
+         (params->userPriority <= 0x7) &&
+         (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass)  &&
+         (params->trafficDirection == UPLINK_TRAFFIC ||
+            params->trafficDirection == DNLINK_TRAFFIC ||
+            params->trafficDirection == BIDIR_TRAFFIC) &&
+         (params->trafficType == TRAFFIC_TYPE_APERIODIC ||
+            params->trafficType == TRAFFIC_TYPE_PERIODIC ) &&
+         (params->voicePSCapability == DISABLE_FOR_THIS_AC  ||
+            params->voicePSCapability == ENABLE_FOR_THIS_AC ||
+            params->voicePSCapability == ENABLE_FOR_ALL_AC) &&
+         (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) )
+    {
+        return  A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Sending create_pstream_cmd: ac=%d    tsid:%d\n", DBGARG,
+        params->trafficClass, params->tsid));
+
+    cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    A_MEMCPY(cmd, params, sizeof(*cmd));
+
+        /* this is an implicitly created Fat pipe */
+    if (params->tsid == WMI_IMPLICIT_PSTREAM) {
+        LOCK_WMI(wmip);
+        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+        UNLOCK_WMI(wmip);
+    } else {
+            /* this is an explicitly created thin stream within a fat pipe */
+        LOCK_WMI(wmip);
+        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+        activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass];
+        wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid);
+            /* if a thinstream becomes active, the fat pipe automatically
+            * becomes active
+            */
+        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+        UNLOCK_WMI(wmip);
+    }
+
+        /* Indicate activty change to driver layer only if this is the
+         * first TSID to get created in this AC explicitly or an implicit
+         * fat pipe is getting created.
+         */
+    if (!fatPipeExistsForAC) {
+        A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass);
+    }
+
+    /* mike: should be SYNC_BEFORE_WMIFLAG */
+    return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid)
+{
+    void *osbuf;
+    WMI_DELETE_PSTREAM_CMD *cmd;
+    A_STATUS status;
+	A_UINT16 activeTsids=0;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->trafficClass = trafficClass;
+    cmd->tsid = tsid;
+
+    LOCK_WMI(wmip);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+        /* Check if the tsid was created & exists */
+    if (!(activeTsids & (1<<tsid))) {
+
+        A_DPRINTF(DBG_WMI,
+        (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass));
+            /* TODO: return a more appropriate err code */
+        return A_ERROR;
+    }
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid));
+
+    status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID,
+                         SYNC_BEFORE_WMIFLAG));
+
+    LOCK_WMI(wmip);
+    wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+
+        /* Indicate stream inactivity to driver layer only if all tsids
+         * within this AC are deleted.
+         */
+    if(!activeTsids) {
+        A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass);
+        wmip->wmi_fatPipeExists &= ~(1<<trafficClass);
+    }
+
+    return status;
+}
+
+/*
+ * used to set the bit rate.  rate is in Kbps.  If rate == -1
+ * then auto selection is used.
+ */
+A_STATUS
+wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate)
+{
+    void *osbuf;
+    WMI_BIT_RATE_CMD *cmd;
+    A_INT8 index;
+
+    if (rate != -1) {
+        index = wmi_validate_bitrate(wmip, rate);
+        if(index == A_EINVAL){
+            return A_EINVAL;
+        }
+    } else {
+        index = -1;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->rateIndex = index;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_bitrate_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+/*
+ * Returns TRUE iff the given rate index is legal in the current PHY mode.
+ */
+A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex)
+{
+    WMI_PHY_MODE phyMode = wmip->wmi_phyMode;
+    A_BOOL isValid = TRUE;
+    switch(phyMode) {
+        case WMI_11A_MODE:
+            if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11B_MODE:
+            if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11GONLY_MODE:
+            if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11G_MODE:
+        case WMI_11AG_MODE:
+            if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        default:
+            A_ASSERT(FALSE);
+            break;
+    }
+
+    return isValid;
+}
+
+A_INT8
+wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate)
+{
+    A_INT8 i;
+    if (rate != -1)
+    {
+        for (i=0;;i++)
+        {
+            if (wmi_rateTable[(A_UINT32) i] == 0) {
+                return A_EINVAL;
+            }
+            if (wmi_rateTable[(A_UINT32) i] == rate) {
+                break;
+            }
+        }
+    }
+    else{
+     i = -1;
+    }
+
+    if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) {
+        return A_EINVAL;
+    }
+
+    return i;
+}
+
+A_STATUS
+wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask)
+{
+    void *osbuf;
+    WMI_FIX_RATES_CMD *cmd;
+    A_UINT32 rateIndex;
+
+    /* Make sure all rates in the mask are valid in the current PHY mode */
+    for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) {
+       if((1 << rateIndex) & (A_UINT32)fixRatesMask) {
+            if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) {
+                A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG));
+                return A_EINVAL;
+            }
+       }
+    }
+
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->fixRateMask = fixRatesMask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_ratemask_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_channelList_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+/*
+ * used to generate a wmi sey channel Parameters cmd.
+ * mode should always be specified and corresponds to the phy mode of the
+ * wlan.
+ * numChan should alway sbe specified. If zero indicates that all available
+ * channels should be used.
+ * channelList is an array of channel frequencies (in Mhz) which the radio
+ * should limit its operation to.  It should be NULL if numChan == 0.  Size of
+ * array should correspond to numChan entries.
+ */
+A_STATUS
+wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+                          WMI_PHY_MODE mode, A_INT8 numChan,
+                          A_UINT16 *channelList)
+{
+    void *osbuf;
+    WMI_CHANNEL_PARAMS_CMD *cmd;
+    A_INT8 size;
+
+    size = sizeof (*cmd);
+
+    if (numChan) {
+        if (numChan > WMI_MAX_CHANNELS) {
+            return A_EINVAL;
+        }
+        size += sizeof(A_UINT16) * (numChan - 1);
+    }
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    wmip->wmi_phyMode = mode;
+    cmd->scanParam   = scanParam;
+    cmd->phyMode     = mode;
+    cmd->numChannels = numChan;
+    A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+                              WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val ||
+        rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val ||
+        rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val ||
+        rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val ||
+        rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val ||
+        rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val ||
+        rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val ||
+        rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val ||
+        rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val ||
+        rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip,
+                              WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SET_HOST_SLEEP_MODE_CMD *cmd;
+
+    if( hostModeCmd->awake == hostModeCmd->asleep) {
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wow_mode_cmd(struct wmi_t *wmip,
+                              WMI_SET_WOW_MODE_CMD *wowModeCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SET_WOW_MODE_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_get_wow_list_cmd(struct wmi_t *wmip,
+                              WMI_GET_WOW_LIST_CMD *wowListCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_GET_WOW_LIST_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+static A_STATUS
+wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_GET_WOW_LIST_REPLY *reply;
+
+    if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_GET_WOW_LIST_REPLY *)datap;
+
+    A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters,
+                          reply);
+
+    return A_OK;
+}
+
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_ADD_WOW_PATTERN_CMD *addWowCmd,
+                                 A_UINT8* pattern, A_UINT8* mask,
+                                 A_UINT8 pattern_size)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_ADD_WOW_PATTERN_CMD *cmd;
+    A_UINT8 *filter_mask = NULL;
+
+    size = sizeof (*cmd);
+
+    size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8));
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->filter_list_id = addWowCmd->filter_list_id;
+    cmd->filter_offset = addWowCmd->filter_offset;
+    cmd->filter_size = addWowCmd->filter_size;
+
+    A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size);
+
+    filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size);
+    A_MEMCPY(filter_mask, mask, addWowCmd->filter_size);
+
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+                              WMI_DEL_WOW_PATTERN_CMD *delWowCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_DEL_WOW_PATTERN_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_snr_threshold_params(struct wmi_t *wmip,
+                             WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SNR_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val ||
+        snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val ||
+        snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val ||
+        snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val ||
+        snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val ||
+        snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_clr_rssi_snr(struct wmi_t *wmip)
+{
+    void    *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(int));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lq_threshold_params(struct wmi_t *wmip,
+                             WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_LQ_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val ||
+        lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val ||
+        lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val ||
+        lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val ||
+        lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val ||
+        lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_TARGET_ERROR_REPORT_BITMASK *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    cmd->bitmask = mask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source)
+{
+    void *osbuf;
+    WMIX_HB_CHALLENGE_RESP_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->cookie = cookie;
+    cmd->source = source;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID,
+                              NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+                            A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+                            A_UINT32 valid)
+{
+    void *osbuf;
+    WMIX_DBGLOG_CFG_MODULE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->config.cfgmmask = mmask;
+    cmd->config.cfgtsr = tsr;
+    cmd->config.cfgrep = rep;
+    cmd->config.cfgsize = size;
+    cmd->config.cfgvalid = valid;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID,
+                              NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_stats_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid)
+{
+    void *osbuf;
+    WMI_ADD_BAD_AP_CMD *cmd;
+
+    if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->badApIndex = apIndex;
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex)
+{
+    void *osbuf;
+    WMI_DELETE_BAD_AP_CMD *cmd;
+
+    if (apIndex > WMI_MAX_BAD_AP_INDEX) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->badApIndex = apIndex;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM)
+{
+    void *osbuf;
+    WMI_SET_TX_PWR_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->dbM = dbM;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_txPwr_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on)
+{
+	WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+					WMI_SHORTSCANRATIO_DEFAULT,
+					DEFAULT_SCAN_CTRL_FLAGS,
+					0};
+
+	if (on) {
+		/* Enable foreground scanning */
+                if (wmi_scanparams_cmd(wmip, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK) {
+			return -EIO;
+		}
+	} else {
+		wmi_disconnect_cmd(wmip);
+		if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0,
+				       0, 0, 0, 0xFF, 0) != A_OK) {
+			return -EIO;
+		}
+	}
+
+	return A_OK;
+}
+
+
+A_UINT16
+wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+	A_UINT16 activeTsids=0;
+
+    LOCK_WMI(wmip);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+    return activeTsids;
+}
+
+A_STATUS
+wmi_get_roam_tbl_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType)
+{
+    void *osbuf;
+    A_UINT32 size = sizeof(A_UINT8);
+    WMI_TARGET_ROAM_DATA *cmd;
+
+    osbuf = A_NETBUF_ALLOC(size);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf));
+    cmd->roamDataType = roamDataType;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+                      A_UINT8 size)
+{
+    void *osbuf;
+    WMI_SET_ROAM_CTRL_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    A_MEMCPY(cmd, p, size);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+                            A_UINT8 size)
+{
+    void *osbuf;
+    WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd;
+
+    /* These timers can't be zero */
+    if(!pCmd->psPollTimeout || !pCmd->triggerTimeout ||
+       !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD ||
+         pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) ||
+       !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD ||
+         pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD))
+        return A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    A_MEMCPY(cmd, pCmd, size);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+/* Send a command to Target to change GPIO output pins. */
+A_STATUS
+wmi_gpio_output_set(struct wmi_t *wmip,
+                    A_UINT32 set_mask,
+                    A_UINT32 clear_mask,
+                    A_UINT32 enable_mask,
+                    A_UINT32 disable_mask)
+{
+    void *osbuf;
+    WMIX_GPIO_OUTPUT_SET_CMD *output_set;
+    int size;
+
+    size = sizeof(*output_set);
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG,
+        set_mask, clear_mask, enable_mask, disable_mask));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    output_set->set_mask                   = set_mask;
+    output_set->clear_mask                 = clear_mask;
+    output_set->enable_mask                = enable_mask;
+    output_set->disable_mask               = disable_mask;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target requesting state of the GPIO input pins */
+A_STATUS
+wmi_gpio_input_get(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    osbuf = A_NETBUF_ALLOC(0);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target that changes the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_set(struct wmi_t *wmip,
+                      A_UINT32 gpioreg_id,
+                      A_UINT32 value)
+{
+    void *osbuf;
+    WMIX_GPIO_REGISTER_SET_CMD *register_set;
+    int size;
+
+    size = sizeof(*register_set);
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    register_set->gpioreg_id               = gpioreg_id;
+    register_set->value                    = value;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target to fetch the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_get(struct wmi_t *wmip,
+                      A_UINT32 gpioreg_id)
+{
+    void *osbuf;
+    WMIX_GPIO_REGISTER_GET_CMD *register_get;
+    int size;
+
+    size = sizeof(*register_get);
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    register_get->gpioreg_id               = gpioreg_id;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target acknowledging some GPIO interrupts. */
+A_STATUS
+wmi_gpio_intr_ack(struct wmi_t *wmip,
+                  A_UINT32 ack_mask)
+{
+    void *osbuf;
+    WMIX_GPIO_INTR_ACK_CMD *intr_ack;
+    int size;
+
+    size = sizeof(*intr_ack);
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf));
+
+    intr_ack->ack_mask               = ack_mask;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+A_STATUS
+wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin,
+                          A_UINT8 eCWmax, A_UINT8 aifsn)
+{
+    void *osbuf;
+    WMI_SET_ACCESS_PARAMS_CMD *cmd;
+
+    if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) ||
+        (aifsn > WMI_MAX_AIFSN_ACPARAM))
+    {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->txop   = txop;
+    cmd->eCWmin = eCWmin;
+    cmd->eCWmax = eCWmax;
+    cmd->aifsn  = aifsn;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+                         A_UINT8 trafficClass, A_UINT8 maxRetries,
+                         A_UINT8 enableNotify)
+{
+    void *osbuf;
+    WMI_SET_RETRY_LIMITS_CMD *cmd;
+
+    if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) &&
+        (frameType != DATA_FRAMETYPE))
+    {
+        return A_EINVAL;
+    }
+
+    if (maxRetries > WMI_MAX_RETRIES) {
+        return A_EINVAL;
+    }
+
+    if (frameType != DATA_FRAMETYPE) {
+        trafficClass = 0;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->frameType    = frameType;
+    cmd->trafficClass = trafficClass;
+    cmd->maxRetries   = maxRetries;
+    cmd->enableNotify = enableNotify;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+void
+wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid)
+{
+    if (bssid != NULL) {
+        A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN);
+    }
+}
+
+A_STATUS
+wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode)
+{
+    void *osbuf;
+    WMI_SET_OPT_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->optMode = optMode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID,
+                         SYNC_BOTH_WMIFLAG));
+}
+
+A_STATUS
+wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+                      A_UINT8 frmType,
+                      A_UINT8 *dstMacAddr,
+                      A_UINT8 *bssid,
+                      A_UINT16 optIEDataLen,
+                      A_UINT8 *optIEData)
+{
+    void *osbuf;
+    WMI_OPT_TX_FRAME_CMD *cmd;
+    osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd)));
+
+    cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1));
+
+    cmd->frmType    = frmType;
+    cmd->optIEDataLen   = optIEDataLen;
+    //cmd->optIEData     = (A_UINT8 *)((int)cmd + sizeof(*cmd));
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+    A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr));
+    A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl)
+{
+    void *osbuf;
+    WMI_BEACON_INT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->beaconInterval = intvl;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize)
+{
+    void *osbuf;
+    WMI_SET_VOICE_PKT_SIZE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->voicePktSize = voicePktSize;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen)
+{
+    void *osbuf;
+    WMI_SET_MAX_SP_LEN_CMD *cmd;
+
+    /* maxSPLen is a two-bit value. If user trys to set anything
+     * other than this, then its invalid
+     */
+    if(maxSPLen & ~0x03)
+        return  A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->maxSPLen = maxSPLen;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+convert_userPriority_to_trafficClass(A_UINT8 userPriority)
+{
+        return  (up_to_ac[userPriority & 0x7]);
+}
+
+A_UINT8
+wmi_get_power_mode_cmd(struct wmi_t *wmip)
+{
+    return wmip->wmi_powerMode;
+}
+
+A_STATUS
+wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance)
+{
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+
+   A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+   A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len);
+
+   return A_OK;
+}
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+A_STATUS
+wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+    void *osbuf;
+    WMI_SET_AUTH_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->mode = mode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+    void *osbuf;
+    WMI_SET_REASSOC_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->mode = mode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status)
+{
+    void *osbuf;
+    WMI_SET_LPREAMBLE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold)
+{
+    void *osbuf;
+    WMI_SET_RTS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->threshold = threshold;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status)
+{
+    void *osbuf;
+    WMI_SET_WMM_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID,
+            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg)
+{
+    void *osbuf;
+    WMI_SET_WMM_TXOP_CMD *cmd;
+
+    if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) )
+        return A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->txopEnable = cfg;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID,
+            NO_SYNC_WMIFLAG));
+
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/* WMI  layer doesn't need to know the data type of the test cmd.
+   This would be beneficial for customers like Qualcomm, who might
+   have different test command requirements from differnt manufacturers
+ */
+A_STATUS
+wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len)
+{
+    void *osbuf;
+    char *data;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    osbuf= A_NETBUF_ALLOC(len);
+    if(osbuf == NULL)
+    {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, len);
+    data = A_NETBUF_DATA(osbuf);
+    A_MEMCPY(data, buf, len);
+
+    return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID,
+         NO_SYNC_WMIFLAG));
+}
+
+#endif
+
+A_STATUS
+wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status)
+{
+    void *osbuf;
+    WMI_SET_BT_STATUS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->streamType = streamType;
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd)
+{
+    void *osbuf;
+    WMI_SET_BT_PARAMS_CMD* alloc_cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(alloc_cmd, sizeof(*cmd));
+    A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_keepalive_configured(struct wmi_t *wmip)
+{
+    void *osbuf;
+    WMI_GET_KEEPALIVE_CMD *cmd;
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+    cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+wmi_get_keepalive_cmd(struct wmi_t *wmip)
+{
+    return wmip->wmi_keepaliveInterval;
+}
+
+A_STATUS
+wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval)
+{
+    void *osbuf;
+    WMI_SET_KEEPALIVE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keepaliveInterval = keepaliveInterval;
+    wmip->wmi_keepaliveInterval = keepaliveInterval;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen,
+                  A_UINT8 *ieInfo)
+{
+    void *osbuf;
+    WMI_SET_APPIE_CMD *cmd;
+    A_UINT16 cmdLen;
+
+    if (ieLen > WMI_MAX_IE_LEN) {
+        return A_ERROR;
+    }
+    cmdLen = sizeof(*cmd) + ieLen - 1;
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+
+    cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, cmdLen);
+
+    cmd->mgmtFrmType = mgmtFrmType;
+    cmd->ieLen = ieLen;
+    A_MEMCPY(cmd->ieInfo, ieInfo, ieLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen)
+{
+    void *osbuf;
+    A_UINT8 *data;
+
+    osbuf = A_NETBUF_ALLOC(dataLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, dataLen);
+
+    data = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(data, cmd, dataLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_INT32
+wmi_get_rate(A_INT8 rateindex)
+{
+    if (rateindex == RATE_AUTO) {
+        return 0;
+    } else {
+        return(wmi_rateTable[(A_UINT32) rateindex]);
+    }
+}
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss)
+{
+	if (NULL != bss)
+	{
+		wlan_node_return (&wmip->wmi_scan_table, bss);
+	}
+}
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+				   A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+	bss_t *node = NULL;
+    node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid,
+							   ssidLength, bIsWPA2);
+	return node;
+}
+
+void
+wmi_free_allnodes(struct wmi_t *wmip)
+{
+	wlan_free_allnodes(&wmip->wmi_scan_table);
+}
+
+bss_t *
+wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr)
+{
+	bss_t *ni=NULL;
+	ni=wlan_find_node(&wmip->wmi_scan_table,macaddr);
+	return ni;
+}
+
+A_STATUS
+wmi_dset_open_reply(struct wmi_t *wmip,
+                    A_UINT32 status,
+                    A_UINT32 access_cookie,
+                    A_UINT32 dset_size,
+                    A_UINT32 dset_version,
+                    A_UINT32 targ_handle,
+                    A_UINT32 targ_reply_fn,
+                    A_UINT32 targ_reply_arg)
+{
+    void *osbuf;
+    WMIX_DSETOPEN_REPLY_CMD *open_reply;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip));
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*open_reply));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*open_reply));
+    open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+    open_reply->status                   = status;
+    open_reply->targ_dset_handle         = targ_handle;
+    open_reply->targ_reply_fn            = targ_reply_fn;
+    open_reply->targ_reply_arg           = targ_reply_arg;
+    open_reply->access_cookie            = access_cookie;
+    open_reply->size                     = dset_size;
+    open_reply->version                  = dset_version;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len)
+{
+    WMI_PMKID_LIST_REPLY *reply;
+    A_UINT32 expected_len;
+
+    if (len < sizeof(WMI_PMKID_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_PMKID_LIST_REPLY *)datap;
+    expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN;
+
+    if (len < expected_len) {
+        return A_EINVAL;
+    }
+
+    A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID,
+                           reply->pmkidList);
+
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+A_STATUS
+wmi_dset_data_reply(struct wmi_t *wmip,
+                    A_UINT32 status,
+                    A_UINT8 *user_buf,
+                    A_UINT32 length,
+                    A_UINT32 targ_buf,
+                    A_UINT32 targ_reply_fn,
+                    A_UINT32 targ_reply_arg)
+{
+    void *osbuf;
+    WMIX_DSETDATA_REPLY_CMD *data_reply;
+    int size;
+
+    size = sizeof(*data_reply) + length;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+    data_reply->status                     = status;
+    data_reply->targ_buf                   = targ_buf;
+    data_reply->targ_reply_fn              = targ_reply_fn;
+    data_reply->targ_reply_arg             = targ_reply_arg;
+    data_reply->length                     = length;
+
+    if (status == A_OK) {
+        if (a_copy_from_user(data_reply->buf, user_buf, length)) {
+            return A_ERROR;
+        }
+    }
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+A_STATUS
+wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status)
+{
+    void *osbuf;
+    char *cmd;
+
+	wps_enable = status;
+
+    osbuf = a_netbuf_alloc(sizeof(1));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    a_netbuf_put(osbuf, sizeof(1));
+
+    cmd = (char *)(a_netbuf_to_data(osbuf));
+
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd[0] = (status?1:0);
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_doc.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_doc.h
new file mode 100644
index 0000000..19cd938
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_doc.h
@@ -0,0 +1,4421 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#if 0
+Wireless Module Interface (WMI) Documentaion
+
+   This section describes the format and the usage model for WMI control and
+   data messages between the host and the AR6000-based targets. The header
+   file include/wmi.h contains all command and event manifest constants as
+   well as structure typedefs for each set of command and reply parameters.
+
+Data Frames
+
+   The data payload transmitted and received by the target follows RFC-1042
+   encapsulation and thus starts with an 802.2-style LLC-SNAP header. The
+   WLAN module completes 802.11 encapsulation of the payload, including the
+   MAC header, FCS, and WLAN security related fields. At the interface to the
+   message transport (HTC), a data frame is encapsulated in a WMI message.
+
+WMI Message Structure
+
+   The WMI protocol leverages an 802.3-style Ethernet header in communicating
+   the source and destination information between the host and the AR6000
+   modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In
+   addition, the WMI protocol adds a header to all data messages:
+
+    {
+    INT8    rssi
+                  The RSSI of the received packet and its units are shown in db above the
+                      noise floor, and the noise floor is shown in dbm.
+    UINT8   info
+                      Contains information on message type and user priority. Message type
+                      differentiates between a data packet and a synchronization message.
+    } WMI_DATA_HDR
+
+   User priority contains the 802.1d user priority info from host to target. Host
+   software translates the host Ethernet format to 802.3 format prior to Tx and
+   802.3 format to host format in the Rx direction. The host does not transmit the
+   FCS that follows the data. MsgType differentiates between a regular data
+   packet (msgType=0) and a synchronization message (msgType=1).
+
+Data Endpoints
+
+   The AR6000 chipset provides several data endpoints to support quality of
+   service (QoS) and maintains separate queues and separate DMA engines for
+   each data endpoint. A data endpoint can be bi-directional.
+
+   Best effort (BE) class traffic uses the default data endpoint (2). The host can
+   establish up to two additional data endpoints for other traffic classes. Once
+   such a data endpoint is established, it sends and receives corresponding QoS
+   traffic in a manner similar to the default data endpoint.
+
+   If QoS is desired over the interconnect, host software must classify each data
+   packet and place it on the appropriate data endpoint. The information
+   required to classify data is generally available in-band as an 802.1p/q style
+   tag or as the ToS field in the IP header. The information may also be available
+   out-of-band depending on the host DDI.
+
+Connection States
+
+   Table B-1 describes the AR6000 WLAN connection states:
+
+   Table B-1.  AR6000 Connection States
+
+Connection State
+    Description
+
+   DISCONNECTED
+    In this state, the AR6000 device is not connected to a wireless
+   network. The device is in this state after reset when it sends the
+   WIRELESS MODULE “READY” EVENT, after it processes a
+   DISCONNECT command, and when it loses its link with the
+   access point (AP) that it was connected to. The device signals a
+   transition to the DISCONNECTED state with a “DISCONNECT”
+   event.
+
+CONNECTED
+    In this state, the AR6000 device is connected to wireless networks.
+   The device enters this state after successfully processing a
+   CONNECT, which establishes a connection with a wireless
+   network. The device signals a transition to the CONNECTED state
+   with a “CONNECT” event.
+
+
+Message Types
+
+   WMI uses commands, replies, and events for the control and configuration of
+   the AR6000 device. The control protocol is asynchronous. Table B-2 describes
+   AR6000 message types:
+
+Table B-2.  AR6000 Message Types
+
+Message Type
+    Description
+
+Commands
+    Control messages that flow from the host to the device
+
+Replies/Events
+    Control messages that flow from the device to the host.
+
+   The device issues a reply to some WMI commands, but not to others.
+   The payload in a reply is command-specific, and some commands do
+   not trigger a reply message at all. Events are control messages issued
+   by the device to signal the occurrence of an asynchronous event.
+
+
+WMI Message Format
+
+   All WMI control commands, replies and events use the header format:
+
+   WMI_CMD_HDR Header Format
+   {
+        UINT16 id
+                 This 16-bit constant identifies which WMI command the host is issuing,
+                 which command the target is replying to, or which event has occurred.
+        WMI_CMD_HDR
+   }
+
+
+   A variable-size command-, reply-, or event-specific payload follows the
+   header. Over the interconnect, all fields in control messages (including
+   WMI_CMD_HDR and the command specific payload) use 32-bit little Endian
+   byte ordering and fields are packed. The AR6000 device always executes
+   commands in order, and the host may send multiple commands without
+   waiting for previous commands to complete. A majority of commands are
+   processed to completion once received. Other commands trigger a longer
+   duration activity whose completion is signaled to the host through an event.
+
+Command Restrictions
+
+   Some commands may only be issued when the AR6000 device is in a certain
+   state. The host is required to wait for an event signaling a state transition
+   before such a command can be issued. For example, if a command requires
+   the device to be in the CONNECTED state, then the host is required to wait
+   for a “CONNECT” event before it issues that command.
+
+   The device ignores any commands inappropriate for its current state. If the
+   command triggers a reply, the device generates an error reply. Otherwise, the
+   device silently ignores the inappropriate command.
+
+Command and Data Synchronization
+
+   WMI provides a mechanism for a host to advise the device of necessary
+   synchronization between commands and data. The device implements
+   synchronization; no implicit synchronization exists between endpoints.
+
+   The host controls synchronization using the “SYNCHRONIZE” command
+   over the control channel and synchronization messages over data channels.
+   The device stops each data channel upon receiving a synchronization message
+   on that channel, processing all data packets received prior to that message.
+   After the device receives synchronization messages for each data endpoint
+   and the “SYNCHRONIZE” command, it resumes all channels.
+
+   When the host must guarantee a command executes before processing new
+   data packets, it first issues the command, then issues the “SYNCHRONIZE”
+   command and sends synchronization messages on data channels. When the
+   host must guarantee the device has processed all old data packets before a
+   processing a new command, it issues a “SYNCHRONIZE” command and
+   synchronization messages on all data channels, then issues the desired
+   command.
+
+
+
+WMI Commands
+
+   ADD_BAD_AP
+    Cause the AR6000 device to avoid a particular AP
+   ADD_CIPHER_KEY
+    Add or replace any of the four AR6000 encryption keys
+   ADD_WOW_PATTERN
+    Used to add a pattern to the WoW pattern list
+   CLR_RSSI_SNR
+    Clear the current calculated RSSI and SNR value
+   CONNECT_CMD
+    Request that the AR6000 device establish a wireless connection
+        with the specified SSID
+   CREATE_PSTREAM
+    Create prioritized data endpoint between the host and device
+   DELETE_BAD_AP
+    Clear an entry in the bad AP table
+   DELETE_CIPHER_KEY
+    Delete a previously added cipher key
+   DELETE_PSTREAM
+    Delete a prioritized data endpoint
+   DELETE_WOW_PATTERN
+    Remove a pre-specified pattern from the WoW pattern list
+   EXTENSION
+    WMI message interface command
+   GET_BIT_RATE
+    Retrieve rate most recently used by the AR6000
+   GET_CHANNEL_LIST
+    Retrieve list of channels used by the AR6000
+   GET_FIXRATES
+    Retrieves the rate-mask set via the SET_FIXRATES command.
+   GET_PMKID_LIST_CMD
+    Retrieve the firmware list of PMKIDs
+   GET_ROAM_DATA
+    Internal use for data collection; available in special build only
+   GET_ROAM_TBL
+    Retrieve the roaming table maintained on the target
+   GET_TARGET_STATS
+    Request that the target send the statistics it maintains
+   GET_TX_PWR
+    Retrieve the current AR6000 device Tx power levels
+   GET_WOW_LIST
+    Retrieve the current list of WoW patterns
+   LQ_THRESHOLD_PARAMS
+    Set the link quality thresholds
+   OPT_TX_FRAME
+    Send a special frame (special feature)
+   RECONNECT
+    Request a reconnection to a BSS
+   RSSI_THRESHOLD_PARAMS
+    Configure how the AR6000 device monitors and reports signal
+       strength (RSSI) of the connected BSS
+   SCAN_PARAMS
+    Determine dwell time and changes scanned channels
+   SET_ACCESS_PARAMS
+    Set access parameters for the wireless network
+   SET_ADHOC_BSSID
+    Set the BSSID for an ad hoc network
+   SET_AKMP_PARAMS
+    Set multiPMKID mode
+   SET_APPIE
+    Add application-specified IE to a management frame
+   SET_ASSOC_INFO
+    Specify the IEs the device should add to association or
+        reassociation requests
+   SET_AUTH_MODE
+    Set 802.11 authentication mode of reconnection
+   SET_BEACON_INT
+    Set the beacon interval for an ad hoc network
+   SET_BIT_RATE
+    Set the AR6000 to a specific fixed bit rate
+   SET_BMISS_TIME
+    Set the beacon miss time
+   SET_BSS_FILTER
+    Inform the AR6000 of network types about which it wants to
+        receive information using a “BSSINFO” event
+   SET_BT_PARAMS
+    Set the status of a Bluetooth stream (SCO or A2DP) or set
+        Bluetooth coexistence register parameters
+   SET_BT_STATUS
+    Set the status of a Bluetooth stream (SCO or A2DP)
+   SET_CHANNEL_PARAMETERS
+    Configure WLAN channel parameters
+   SET_DISC_TIMEOUT
+    Set the amount of time the AR6000 spends attempting to
+        reestablish a connection
+   SET_FIXRATES
+    Set the device to a specific fixed PHY rate (supported subset)
+   SET_HALPARAM
+    Internal AR6000 command to set certain hardware parameters
+   SET_HOST_SLEEP_MODE
+    Set the host mode to asleep or awake
+   SET_IBSS_PM_CAPS
+    Support a non-standard power management scheme for an
+        ad hoc network
+   SET_LISTEN_INT
+    Request a listen interval
+   SET_LPREAMBLE
+    Override the short preamble capability of the AR6000 device
+   SET_MAX_SP_LEN
+    Set the maximum service period
+   SET_OPT_MODE
+    Set the special mode on/off (special feature)
+   SET_PMKID
+    Set the pairwise master key ID (PMKID)
+   SET_PMKID_LIST_CMD
+    Configure the firmware list of PMKIDs
+   SET_POWER_MODE
+    Set guidelines on trade-off between power utilization
+   SET_POWER_PARAMS
+    Configure power parameters
+   SET_POWERSAVE_PARAMS
+    Set the two AR6000 power save timers
+   SET_PROBED_SSID
+    Provide list of SSIDs the device should seek
+   SET_REASSOC_MODE
+    Specify whether the disassociated frame should be sent upon
+        reassociation
+   SET_RETRY_LIMITS
+    Limit how many times the device tries to send a frame
+   SET_ROAM_CTRL
+    Control roaming behavior
+   SET_RTS
+    Determine when RTS should be sent
+   SET_SCAN_PARAMS
+    Set the AR6000 scan parameters
+   SET_TKIP_COUNTERMEASURES
+    Enable/disable reports of TKIP MIC errors
+   SET_TX_PWR
+    Specify the AR6000 device Tx power levels
+   SET_VOICE_PKT_SIZE
+    Set voice packet size
+   SET_WMM
+    Override the AR6000 WMM capability
+   SET_WMM_TXOP
+    Configure TxOP bursting when sending traffic to a WMM-
+    capable AP
+   SET_WOW_MODE
+    Enable/disable WoW mode
+   SET_WSC_STATUS
+    Enable/disable profile check in cserv when the WPS protocol
+    is in progress
+   SNR_THRESHOLD_PARAMS
+    Configure how the device monitors and reports SNR of BSS
+   START_SCAN
+    Start a long or short channel scan
+   SYNCHRONIZE
+    Force a synchronization point between command and data
+    paths
+   TARGET_REPORT_ERROR_BITMASK
+    Control “ERROR_REPORT” events from the AR6000
+
+
+
+
+Name
+    ADD_BAD_AP
+
+Synopsis
+    The host uses this command to cause the AR6000 to avoid a particular AP. The
+    AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command
+    adds or replaces the specified entry in this bad AP table.
+
+    If the AR6000 are currently connected to the AP specified in this command, they
+    disassociate.
+
+Command
+    wmiconfig eth1 --badap <bssid> <badApIndex>
+
+Command Parameters
+    UINT8 badApIndex    Index [0...1] that identifies which entry in the
+                        bad AP table to use
+
+
+    UINT8 bssid[6]  MAC address of the AP to avoid
+
+Command Values
+    badApIndex = 0, 1    Entry in the bad AP table to use
+
+Reset Value
+    The bad AP table is cleared
+
+Restrictions
+    None
+
+See Also
+    “DELETE_BAD_AP” on page B-13
+
+=====================================================================
+Name
+    ADD_CIPHER_KEY
+
+Synopsis
+    The host uses this command to add/replace any of four encryption keys on the
+    AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event
+    has been received by the host for all dot11Auth modes except for SHARED_AUTH.
+    When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY
+    command should be issued before the “CONNECT” command.
+
+Command
+    wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage>
+                            <keyLength> <keyopctrl> <keyRSC> <key>
+
+Command Parameters
+    UINT8 keyIndex      Index (0...3) of the key to add/replace;
+                        uniquely identifies the key
+    UINT8 keyType    CRYPTO_TYPE
+    UINT8 keyUsage   Specifies usage parameters of the key when
+                     keyType = WEP_CRYPT
+    UINT8 keyLength  Length of the key in bytes
+    UINT8 keyOpCtrl  bit[0] = Initialize TSC (default),
+                     bit[1] = Initialize RSC
+    UINT8 keyRSC[8]  Key replay sequence counter (RSC) initial
+                     value the device should use
+    UINT8 key[32]    Key material used for this connection
+    Command Values
+    {
+        NONE_CRYPT = 1
+        WEP_CRYPT  = 2
+        TKIP_CRYPT = 3
+        AES_CRYPT  = 4
+        KEY_OP_INIT_TSC   0x01
+        KEY_OP_INIT_RSC   0x02
+        KEY_OP_INIT_VAL   0x03
+                Default is to Initialize the TSC
+        KEY_OP_VALID_MASK 0x04
+                Two operations defined
+    } CRYPTO_TYPE
+
+    {
+        PAIRWISE_USAGE  = 0  Set if the key is used for unicast traffic only
+        GROUP_USAGE     = 1  Set if the key is used to receive multicast
+                              traffic (also set for static WEP keys)
+        TX_USAGE        = 2  Set for the GROUP key used to transmit frames
+                All others are reserved
+    } KEY_USAGE
+
+Reset Value
+    The four available keys are disabled.
+
+Restrictions
+    The cipher should correspond to the encryption mode specified in the “CONNECT”
+    command.
+
+See Also
+    “DELETE_CIPHER_KEY”
+
+=====================================================================
+
+
+Name
+    ADD_WOW_PATTERN
+
+Synopsis
+    The host uses this command to add a pattern to the WoW pattern list; used for
+    pattern-matching for host wakeups by the WoW module. If the host mode is asleep
+    and WoW is enabled, all packets are matched against the existing WoW patterns. If a
+    packet matches any of the patterns specified, the target will wake up the host. All
+    non-matching packets are discarded by the target without being sent up to the host.
+
+Command
+    wmiconfig –addwowpattern <list-id> <filter-size> <filter-offset>
+    <pattern> <mask>
+
+Command Parameters
+    A_UINT8  filter_list_id    ID of the list that is to include the new pattern
+    A_UINT8  filter_size       Size of the new pattern
+    A_UINT8  filter_offset     Offset at which the pattern matching for this
+                                new pattern should begin at
+    A_UINT8  filter[1]         Byte stream that contains both the pattern and
+                                the mask of the new WoW wake-up pattern
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined (default host mode is awake)
+
+Restrictions
+    None
+
+See Also
+    “DELETE_WOW_PATTERN”
+
+=====================================================================
+
+
+Name
+    CLR_RSSI_SNR
+
+Synopsis
+    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+    running-average value. This command will clear the history and have a fresh start
+    for the running-average mechanism.
+
+Command
+    wmiconfig eth1 --cleanRssiSnr
+
+Command Parameters
+    None
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+Name
+    CONNECT_CMD
+
+Synopsis
+    New connect control information (connectCtrl) is added, with 32 possible modifiers.
+
+    CONNECT_SEND_REASSOC
+        Valid only for a host-controlled connection to a
+        particular AP. If this bit is set, a reassociation frame is
+        sent. If this bit is clear, an association request frame is
+        sent to the AP.
+
+    CONNECT_IGNORE_WPAx_GROUP_CIPHER
+        No group key is issued in the CONNECT command,
+        so use the group key advertised by the AP. In a target-
+        initiated roaming situation this allows a STA to roam
+        between APs that support different multicast ciphers.
+
+    CONNECT_PROFILE_MATCH_DONE
+        In a host-controlled connection case, it is possible that
+        during connect, firmware may not have the
+        information for a profile match (e.g, when the AP
+        supports hidden SSIDs and the device may not
+        transmit probe requests during connect). By setting
+        this bit in the connection control information, the
+        firmware waits for a beacon from the AP with the
+        BSSID supplied in the CONNECT command. No
+        additional profile checks are done.
+
+    CONNECT_IGNORE_AAC_BEACON
+        Ignore the Admission Capacity information in the
+        beacon of the AP
+
+    CONNECT_ASSOC_POLICY_USER
+        When set, the CONNECT_SEND_REASSOC setting
+        determines if an Assoc or Reassoc is sent to an AP
+
+Command
+    wmiconfig --setconnectctrl <ctrl flags bitmask>
+
+Command Parameters
+    typedef struct{
+    A_UINT8 networktype;
+    A_UINT8 dot11authmode;
+    A_UINT8 authmode;
+    A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/
+    A_UINT8 pairwiseCryptoLen;
+    A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/
+    A_UINT8 groupCryptoLen;
+    A_UINT8 ssidLength;
+    A_UCHAR ssid[WMI_MAX_SSID_LEN];
+    A_UINT16 channel;
+    A_UINT8 bssid[AUTH_MAC_LEN];
+    A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/
+    } WMI_CONNECT_CMD;
+
+    ctrl flags bitmask
+        = 0x0001 CONNECT_ASSOC_POLICY_USER
+            Assoc frames are sent using the policy specified by
+            the flag
+        = 0x0002 CONNECT_SEND_REASSOC
+            Send Reassoc frame while connecting, otherwise send
+            assoc frames
+        = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER
+            Ignore WPAx group cipher for WPA/WPA2
+        = 0x0008 CONNECT_PROFILE_MATCH_DONE
+            Ignore any profile check
+        = 0x0010 CONNECT_IGNORE_AAC_BEACON
+            Ignore the admission control information in the
+            beacon
+        ... CONNECT_CMD, continued
+        Command Values
+        typedef enum {
+            INFRA_NETWORK       = 0x01,
+            ADHOC_NETWORK       = 0x02,
+            ADHOC_CREATOR       = 0x04,
+        } NETWORK_TYPE;
+
+        typedef enum {
+            OPEN_AUTH           = 0x01,
+            SHARED_AUTH         = 0x02,
+            LEAP_AUTH           = 0x04,
+        } DOT11_AUTH_MODE;
+        typedef enum {
+            NONE_AUTH           = 0x01,
+            WPA_AUTH            = 0x02,
+            WPA_PSK_AUTH        = 0x03,
+            WPA2_AUTH           = 0x04,
+            WPA2_PSK_AUTH       = 0x05,
+            WPA_AUTH_CCKM       = 0x06,
+            WPA2_AUTH_CCKM      = 0x07,
+        } AUTH_MODE;
+        typedef enum {
+            NONE_CRYPT          = 0x01,
+            WEP_CRYPT           = 0x02,
+            TKIP_CRYPT          = 0x03,
+            AES_CRYPT           = 0x04,
+        } CRYPTO_TYPE;
+        typedef enum {
+            CONNECT_ASSOC_POLICY_USER = 0x0001,
+            CONNECT_SEND_REASSOC = 0x0002,
+            CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+            CONNECT_PROFILE_MATCH_DONE = 0x0008,
+            CONNECT_IGNORE_AAC_BEACON = 0x0010,
+        } WMI_CONNECT_CTRL_FLAGS_BITS;
+
+    pairwiseCryptoLen and groupCryptoLen are valid when the respective
+    CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in
+    bytes.
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    CREATE_PSTREAM
+
+Synopsis
+    The host uses this command to create a new prioritized data endpoint between the
+    host and the AR6000 device that carries a prioritized stream of data. If the AP that the
+    device connects to requires TSPEC stream establishment, the device requests the
+    corresponding TSPEC with the AP. The maximum and minimum service interval
+    ranges from 0 – 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a
+    reply event for this command, as it is always assumed the command has succeeded.
+    An AP admission control response comes to the host via a WMI_CAC_INDICATION
+    event, once the response for the ADDTS frame comes.
+
+    Examples of cases where reassociation is generated (when WMM) and cases where
+    ADDTS is generated (when WMM and enabling ACM) are when:
+        Changing UAPSD flags in WMM mode, reassociation is generated
+        Changing the interval of sending auto QoS Null frame in WMM mode;
+            reassociation is not generated
+        Issuing a command with same previous parameters in WMM mode and enabling
+            ACM, an ADDTS request is generated
+        Changing the interval of a QoS null frame sending in WMM mode and enabling
+            ACM, an ADDTS request is generated
+        Issuing the command in disconnected state, reassociation or ADDTS is not
+            generated but the parameters are available after (re)association
+
+Command
+    --createqos <user priority> <direction> <traffic class>
+<trafficType> <voice PS capability> <min service interval> <max
+service interval> <inactivity interval> <suspension interval>
+<service start time> <tsid> <nominal MSDU> <max MSDU> <min data
+rate> <mean data rate> <peak data rate> <max burst size> <delay
+bound> <min phy rate> <sba> <medium time> where:
+
+    <user priority>
+    802.1D user priority range (0–7)
+    <direction>
+        = 0    Tx (uplink) traffic
+        = 1    Rx (downlink) traffic
+        = 2    Bi-directional traffic
+    <traffic class>
+        = 1    BK
+        = 2    VI
+        = 3    VO
+    <trafficType>
+        = 0    Aperiodic
+        = 1    Periodic
+    <voice PS capability>
+        Specifies whether the voice power save mechanism
+    (APSD if AP supports it or legacy/simulated APSD
+    [using PS-Poll]) should be used
+        = 0    Disable voice power save for traffic class
+        = 1    Enable APSD voice power save for traffic class
+        = 2    Enable voice power save for all traffic classes
+    <min service interval>
+        (In ms)
+    <max service interval>
+        Inactivity interval (in ms) (0 = Infinite)
+    <suspension interval>
+        (In ms)
+    <service start time>
+        Service start time
+    <tsid>
+        TSID range (0–15)
+    <nominal MSDU>
+        Nominal MAC SDU size
+    <max MSDU>
+        Maximum MAC SDU size
+    <min data rate>
+        Minimum data rate (in bps)
+    <mean data rate>
+        Mean data rate (in bps)
+    <peak data rate>
+        Peak data rate (in bps)
+    <max burst size>
+        Maximum burst size (in bps)
+    <delay bound>
+        Delay bound
+    <min phy rate>
+        Minimum PHY rate (in bps)
+    <sba>
+        Surplus bandwidth allowance
+    <medium time>
+        Medium time in TU of 32-ms periods per sec
+    ... CREATE_PSTREAM (continued)
+
+Command Parameters
+    UINT8 trafficClass    TRAFFIC_CLASS value
+    UINT8 traffic
+    Direction
+    DIR_TYPE value
+    UINT8    rxQueueNum
+        AR6000 device mailbox index (2 or 3)
+        corresponding to the endpoint the host
+        wishes to use to receive packets for the
+        prioritized stream
+    UINT8 trafficType  TRAFFIC_TYPE value
+    UINT8 voicePS
+Capability
+    VOICEPS_CAP_TYPE value
+    UINT8 tsid          Traffic stream ID
+    UINT8 userPriority  802.1D user priority
+    UINT16 nominalMSDU  Nominal MSDU in octets
+    UINT16 maxMSDU      Maximum MSDU in octets
+    UINT32 minServiceInt Minimum service interval: the min.
+                            period of traffic specified (in ms)
+    UINT32 maxServiceInt  Maximum service interval: the max.
+                        period of traffic specified (in ms)
+    UINT32 inactivityInt Indicates how many ms an established
+                        stream is inactive before the prioritized
+                        data endpoint is taken down and the
+                        corresponding T-SPEC deleted
+    UINT32 suspensionInt  Suspension interval (in ms)
+    UINT32 service       StartTime Service start time
+    UINT32 minDataRate  Minimum data rate (in bps)
+    UINT32 meanDataRate Mean data rate (in bps)
+    UINT32 peakDataRate Peak data rate (in bps)
+    UINT32 maxBurstSize
+    UINT32 delayBound
+    UINT32 minPhyRate   Minimum PHY rate for TSPEC (in bps)
+    UINT32 sba          Surplus bandwidth allowance
+    UINT32 mediumTime   Medium TSPEC time (in units of 32 ms)
+Command Values
+    {
+        WMM_AC_BE = 0   Best Effort
+        WMM_AC_BK = 1   Background
+        WMM_AC_VI = 2   Video
+        WMM_AC_VO = 3   Voice
+        All other values reserved
+    } TRAFFIC_CLASS
+    {
+        UPLINK_TRAFFIC   = 0  From the AR6000 device to the AP
+        DOWNLINK_TRAFFIC = 1  From the AP to the AR6000 device
+        BIDIR_TRAFFIC    = 2  Bi-directional traffic
+        All other values reserved
+    } DIR_TYPE
+    {
+        DISABLE_FOR_THIS_AC = 0
+        ENABLE_FOR_THIS_AC  = 1
+        ENABLE_FOR_ALL_AC   = 2
+        All other values reserved
+    } VOICEPS_CAP_TYPE
+
+    ... CREATE_PSTREAM (continued)
+
+
+        VI  BE   BK    Supported, Y/N?
+   0    0    0    0    Y
+   0    0    0    1    Y
+   0    0    1    0    N
+   0    0    1    1    N
+   0    1    0    0    Y
+   0    1    0    1    Y
+   0    1    1    0    N
+   0    1    1    1    N
+   1    0    0    0    Y
+   1    0    0    1    Y
+   1    0    1    0    N
+   1    1    0    0    N
+   1    1    0    1    Y
+   1    1    0    0    N
+   1    1    1    0    N
+   1    1    1    1    Y
+
+Reset Value
+    No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created
+    (either implicitly by data flow or explicitly by user)
+
+Restrictions
+    This command can only be issued when the device is in the CONNECTED state. If
+    the device receives the command while in DISCONNECTED state, it replies with a
+    failure indication. At most four prioritized data endpoints can be created, one for
+    each AC.
+
+See Also
+    “DELETE_PSTREAM”
+=====================================================================
+
+Name
+    DELETE_BAD_AP
+
+Synopsis
+    The host uses this command to clear a particular entry in the bad AP table
+
+Command
+    wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP
+    entry. num is index from 0-3
+
+Command Parameters
+    UINT8  badApIndex   Index [0...n] that identifies the entry in the bad
+                        AP table to delete
+
+Command Values
+    badApIndex   = 0, 1, 2, 3
+            Entry in the bad AP table
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “ADD_BAD_AP”
+
+=====================================================================
+
+
+Name
+    DELETE_CIPHER_KEY
+
+Synopsis
+    The host uses this command to delete a key that was previously added with the
+    “ADD_CIPHER_KEY” command.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8   keyIndex    Index (0...3) of the key to be deleted
+
+Command Values
+    keyIndex    = 0, 1,2, 3    Key to delete
+
+Reset Value
+    None
+
+Restrictions
+    The host should not delete a key that is currently in use by the AR6000.
+
+See Also
+    “ADD_CIPHER_KEY”
+
+=====================================================================
+
+Name
+    DELETE_PSTREAM
+
+Synopsis
+    The host uses this command to delete a prioritized data endpoint created by a
+    previous “CREATE_PSTREAM” command
+
+Command
+    --deleteqos <trafficClass> <tsid>, where:
+
+    <traffic class>
+        = 0    BE
+        = 1    BK
+        = 2    VI
+        = 3    VO
+    <tsid>
+        The TSpec ID; use the -qosqueue option
+        to get the active TSpec IDs for each traffic class
+
+Command Parameters
+    A_UINT8    trafficClass    Indicate the traffic class of the stream
+                            being deleted
+
+Command Values
+    {
+        WMM_AC_BE = 0    Best effort
+        WMM_AC_BK = 1    Background
+        WMM_AC_VI = 2    Video
+        WMM_AC_VO = 3    Voice
+    } TRAFFIC CLASS
+
+    0-15 for TSID
+
+Reply Values
+    N/A
+
+Restrictions
+    This command should only be issued after a “CREATE_PSTREAM” command has
+    successfully created a prioritized stream
+
+See Also
+    “CREATE_PSTREAM”
+
+=====================================================================
+
+
+Name
+    DELETE_WOW_PATTERN
+
+Synopsis
+    The host uses this command to remove a pre-specified pattern from the
+    WoW pattern list.
+
+Command
+    wmiconfig –delwowpattern <list-id> <pattern-id>
+
+Command Parameters
+    A_UINT8    filter_list_id    ID of the list that contains the WoW filter
+                                 pattern to delete
+    A_UINT8    filter_id    ID of the WoW filter pattern to delete
+
+Reply Parameters
+    None
+
+
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “ADD_WOW_PATTERN”
+
+=====================================================================
+
+
+Name
+    EXTENSION
+
+Synopsis
+    The WMI message interface is used mostly for wireless control messages to a wireless
+    module applicable to wireless module management regardless of the target platform
+    implementation. However, some commands only peripherally related to wireless
+    management are desired during operation. These wireless extension commands may
+    be platform-specific or implementation-dependent.
+
+Command
+    N/A
+
+Command Parameters
+    Command-specific
+
+Command Values
+    Command-specific
+
+Reply Parameters
+    Command-specific
+
+Reset Values
+    None defined
+
+Restrictions
+    None defined
+
+=====================================================================
+
+
+Name
+    GET_BIT_RATE
+
+Synopsis
+    Used by the host to obtain the rate most recently used by the AR6000 device
+
+Command
+    wmiconfig eth1 --getfixrates
+
+Command Parameters
+    None
+
+
+
+Reply Parameters
+    INT8
+    rateIndex
+    See the “SET_BIT_RATE” command
+
+Reset Values
+    None
+
+Restrictions
+    This command should only be used during development/debug; it is not intended
+for use in production. It is only valid when the device is in the CONNECTED state
+
+See Also
+    “SET_BIT_RATE”
+
+=====================================================================
+
+
+Name
+    GET_CHANNEL_LIST
+
+Synopsis
+    Used by the host uses to retrieve the list of channels that can be used by the device
+    while in the current wireless mode and in the current regulatory domain.
+
+Command
+    TBD
+
+Command Parameters
+    None
+
+Reply Parameters
+    UINT8    reserved    Reserved
+    UINT8    numberOfChannels    Number of channels the reply contains
+    UINT16    channelList[numberOfChannels]  Array of channel frequencies (in MHz)
+
+Reset Values
+    None defined
+
+Restrictions
+    The maximum number of channels that can be reported are 32
+
+=====================================================================
+
+
+Name
+    GET_FIXRATES
+
+Synopsis
+    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+    running-average value. This command will clear the history and have a fresh start for
+    the running-average mechanism.
+
+Synopsis
+    This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate
+    that the AR6001 or AR6001 is using. See “SET_FIXRATES”.
+
+Command
+    wmiconfig eth1 --getfixrates
+
+Command Parameters
+    A_UINT16    fixRateMask;    Note: if this command is used prior to
+                using WMI_SET_FIXRATES, AR6000
+                returns 0xffff as fixRateMask, indicating
+                all the rates are enabled
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “SET_FIXRATES”
+
+=====================================================================
+
+
+
+Name
+    GET_PMKID_LIST_CMD
+
+Synopsis
+    Retrieves the list of PMKIDs on the firmware. The
+    WMI_GET_PMKID_LIST_EVENT is generated by the firmware.
+
+Command
+    TBD
+
+Command Parameters
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+See Also
+    SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT
+
+=====================================================================
+
+
+Name
+    GET_ROAM_TBL
+
+Synopsis
+    Retrieve the roaming table maintained on the target. The response is reported
+    asynchronously through the ROAM_TBL_EVENT.
+
+Command
+    wmiconfig --getroamtable <roamctrl> <info>
+
+Command Parameters
+    A_UINT8    roamCtrlType;
+    A_UINT16   roamMode
+    A_UINT16   numEntries
+    WMI_BSS_ROAM_INFO bssRoamInfo[1]
+
+Reply Value
+    Reported asynchronously through the ROAM_TBL_EVENT
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    SET_KEEPALIVE
+
+=====================================================================
+
+
+Name
+    GET_TARGET_STATS
+
+Synopsis
+    The host uses this command to request that the target send the statistics that it
+    maintains. The statistics obtained from the target are accrued in the host every time
+    the GET_TARGET_STATS command is issued. The --clearStats option is added to
+    clear the target statistics maintained in the host.
+
+Command
+    wmiconfig --getTargetStats --clearStats
+
+Command Parameters
+    TARGET_STATS    targetStats
+    WMI_TARGET_STATS
+    UINT8   clearStats
+
+
+Reply Value
+    RSSI return value (0–100)
+
+Reset Values
+    All statistics are cleared (zeroed)
+
+Restrictions
+    The --getTargetStats option must be used; the --clearStats option is also available also
+
+
+=====================================================================
+
+Name
+    GET_TX_PWR
+
+Synopsis
+    The host uses this command to retrieve the current Tx power level
+
+Command
+    wmiconfig -i eth1 --getpower
+
+Command Parameters
+    None
+
+Reply Parameters
+    UINT16 dbM    The current Tx power level specified in dbM
+
+Reset Values
+    The maximum permitted by the regulatory domain
+
+Restrictions
+    None
+
+See Also
+    “SET_TX_PWR”
+
+=====================================================================
+
+
+Name
+    GET_WOW_LIST
+
+Synopsis
+    The host uses this command to retrieve the current list of WoW patterns.
+
+Command
+    wmiconfig –getwowlist <list-id>
+
+Command Parameters
+    A_UINT8 filter_list_id    ID of the list of WoW patterns to retrieve
+
+Reply Value(s)
+    A_UINT16  num_filters    Number of WoW patterns contained in the list
+    A_UINT8   wow_mode    Current mode of WoW (enabled or disabled)
+    A_UINT8    host_mode    Current host mode (asleep or awake)
+    WOW_FILTER    wow_filters[1]
+        Contents of the WoW filter pattern list
+        (contains mask, pattern, offset and size
+    information for each of the patterns)
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “SET_WSC_STATUS”
+
+=====================================================================
+
+
+Name
+    LQ_THRESHOLD_PARAMS
+
+Synopsis
+    Sets Link Quality thresholds, the sampling will happen at every unicast data frame
+    Tx if a certain threshold is met, and the corresponding event will be sent to the host.
+
+Command
+    --lqThreshold <enable> <upper_threshold_1> ...
+    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+
+Command Parameters
+    <enable>    = 0    Disable link quality sampling
+                = 1    Enable link quality sampling
+    <upper_threshold_x>  Above thresholds (value in [0,100]), in
+                    ascending order
+    <lower_threshold_x> Below thresholds (value in [0,100]), in
+                    ascending order
+
+Command Values
+    See command parameters
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    OPT_TX_FRAME
+
+Synopsis
+    Special feature, sends a special frame.
+
+Command
+    wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen>
+    <optIEData>
+
+Command Parameters
+    {
+        A_UINT16    optIEDataLen;
+        A_UINT8    frmType;
+        A_UINT8    dstAddr[ATH_MAC_LEN];
+        A_UINT8    bssid[ATH_MAC_LEN];
+        A_UINT8    optIEData[1];
+    } WMI_OPT_TX_FRAME_CMD;
+
+Command Values
+    <frmtype>   = 1    Probe request frame
+                = 2    Probe response frame
+                = 3    CPPP start
+                = 4    CPPP stop
+
+Reset Value
+    None defined
+
+Restrictions
+    Send a special frame only when special mode is on.
+
+=====================================================================
+
+
+Name
+    RECONNECT
+
+Synopsis
+    This command requests a reconnection to a BSS to which the AR6000 device was
+    formerly connected
+
+Command
+    TBD
+
+Command Parameters
+    UINT16    channel    Provides a hint as to which channel was
+                        used for a previous connection
+    UINT8    bssid[6]    If set, indicates which BSSID to connect to
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+See Also
+    “CONNECT_CMD”
+
+=====================================================================
+
+
+Name
+    RSSI_THRESHOLD_PARAMS
+
+Synopsis
+    Configures how the AR6000 device monitors and reports signal strength (RSSI) of the
+    connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in
+    dbM) of the host specification divide the signal strength range into six segments.
+    When signal strength increases or decreases across one of the boundaries, an
+    RSSI_THRESHOLD event is signaled to the host. The host may then choose to take
+    action (such as influencing roaming).
+
+Command
+    wmiconfig eth1 --rssiThreshold <weight> <pollTime>
+        <above_threshold_val_1> ... <above_threshold_tag_6>
+        <above_threshold_val_6>
+        <below_threshold_tag_1> <below_threshold_val_1> ...
+        <below_threshold_tag_6> <below_threshold_val_6>
+
+Command Parameters
+    UINT8    weight    Range in [1, 16] used to calculate average RSSI
+    UINT32   pollTime   RSSI (signal strength) sampling frequency in
+                seconds (if pollTime = 0, single strength
+        sampling is disabled)
+    USER_RSS__THOLD tholds[12]  Thresholds (6 x 2)
+
+Command Values
+    None defined
+
+Reset Values
+    pollTime is 0, and sampling is disabled
+
+Restrictions
+    Can only be issued if the AR6000 device is connected
+
+
+=====================================================================
+
+Name
+    SCAN_PARAMS
+
+Synopsis
+    The minact parameter determines the minimum active channel dwell time, within
+    which if the STA receives any beacon, it remains on that channel until the maxact
+    channel dwell time. If the STA does not receive a beacon within the minact dwell
+    time, it switches to scan the next channel.
+
+Command
+    wmiconfig -scan -minact=<ms> --maxact=<ms>
+
+Command Parameters
+    UINT16    maxact    Channel dwell time (in ms), default = 0
+    UINT16    minact    Channel dwell time (in ms), default = 105
+
+Command Values
+    See channel parameters
+
+Reset Values
+    None defined
+
+Restrictions
+    The minact value should be greater than 0; maxact should be between 5–65535 ms
+    and greater than minact
+
+=====================================================================
+
+
+Name
+    SET_ACCESS_PARAMS
+
+Synopsis
+    Allows the host to set access parameters for the wireless network. A thorough
+    understanding of IEEE 802.11 is required to properly manipulate these parameters.
+
+Command
+    wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15>
+    --cwmax <0-15> --aifsn<0-15>
+
+Command Parameters
+    UINT16    txop    The maximum time (expressed in units of
+                        32 ms) the device can spend transmitting
+                        after acquiring the right to transmit
+    UINT8    eCWmin    Minimum contention window
+    UINT8    eCWmax    Maximum contention window
+    UINT8    aifsn    The arbitration inter-frame space number
+
+Command Values
+    None
+
+Reset Values
+    Reasonable defaults that vary, between endpoints (prioritized streams)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_ADHOC_BSSID
+
+Synopsis
+    Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID
+    is not found, the target creates an ad hoc network with this BSSID after the connect
+    WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL).
+
+Command
+    wmiconfig eth1 --adhocbssid <bssid>
+
+Command Parameters
+    A_UINT8     bssid[ATH_MAC_LEN]    BSSID is specified in xx:xx:xx:xx:xx:xx format
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_AKMP_PARAMS
+
+Synopsis
+    Enables or disables multi PMKID mode.
+
+Command
+    wmiconfig eth1 --setakmp --multipmkid=<on/off>
+
+Command Parameters
+    typedef struct {
+      A_UINT32    akmpInfo;
+    } WMI_SET_AKMP_PARAMS_CMD;
+
+Command Values
+    akmpInfo;
+    bit[0] = 0
+        MultiPMKID mode is disabled and PMKIDs that
+        were set using the WMI_SET_PMKID_CMD are
+        used in the [Re]AssocRequest frame.
+     bit[0] = 1
+        MultiPMKID mode is enabled and PMKIDs issued
+        by the WMI_SET_PMKID_LIST_CMD are used in
+        the next [Re]AssocRequest sent to the AP.
+
+Reset Values
+    MultiPMKID mode is disabled
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_APPIE
+
+Synopsis
+    Add an application-specified IE to a management frame. The maximum length is
+    76 bytes. Including the length and the element ID, this translates to 78 bytes.
+
+Command
+    wmiconfig --setappie <frame> <IE>, where:
+
+    frame
+        One of beacon, probe, respon, assoc
+
+    IE
+        A hex string beginning with DD (if = 0, no
+        IE is sent in the management frame)
+
+Command Parameters
+    mgmtFrmType;
+        A WMI_MGMT_FRAME_TYPE
+
+    ieLen;
+        Length of the IE to add to the GMT frame
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    Supported only for the probe request and association request management frame
+types. Also, only one IE can be added per management frame type.
+
+=====================================================================
+
+
+Name
+    SET_ASSOC_INFO
+
+Synopsis
+    The host uses this command to specify any information elements (IEs) it wishes the
+    AR6000 device to add to all future association and reassociation requests. IEs must be
+    correct and are used as is by the device. IEs specified through this command are
+    cleared with a DISCONNECT.
+
+Command
+    wmiconfig eth1 --setAssocIe <IE>
+
+Command Parameters
+    UINT8    ieType    Used directly in 802.11 frames
+    UINT8    bufferSize    Size of assocInfo (in bytes) ranging from
+                        0–240. If = 0, previously set IEs are cleared.
+    UINT8    assocInfo[bufferSize]    Used directly in 802.11 frames
+
+Command Values
+    None
+
+Reset Values
+    IEs are cleared
+
+Restrictions
+    This command can only be issued in the DISCONNECTED state
+
+=====================================================================
+
+
+Name
+    SET_AUTHMODE
+
+Synopsis
+    Sets the 802.11 authentication mode of reconnection
+
+Command
+    wmiconfig eth1 --setauthmode <mode>
+
+Command Parameters
+    UINT8    mode
+
+Command Values
+    mode    = 0x00    Proceed with authentication during reconnect
+            = 0x01    Do not proceed with authentication during reconnect
+
+Reset Values
+    Authentication
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BEACON_INT
+
+Synopsis
+    Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
+    impact on power savings. To some degree, a longer interval reduces power
+    consumption but also decreases throughput. A thorough understanding of IEEE
+    802.11 ad hoc networks is required to use this command effectively.
+
+Command
+    wmiconfig eth1 --ibssconintv
+
+Command Parameters
+    UINT16    beaconInterval    Specifies the beacon interval in TU units (1024 ms)
+
+Command Values
+    None
+
+Reset Values
+    The default beacon interval is 100 TUs (102.4 ms)
+
+Restrictions
+    This command can only be issued before the AR6000 device starts an ad hoc network
+
+See Also
+    “SET_IBSS_PM_CAPS”
+
+=====================================================================
+
+
+Name
+    SET_BIT_RATE
+
+Synopsis
+    The host uses this command to set the AR6000 device to a specific fixed rate.
+
+Command
+    wmiconfig eth1 --setfixrates <rate_0> ... <rate_n>
+
+Command Parameters
+    INT8    rateIndex
+    A WMI_BIT_RATE value
+    {
+        RATE_AUTO    = -1
+        RATE_1Mb     = 0
+        RATE_2Mb     = 1
+        RATE_5_5M    = 2
+        RATE_11Mb    = 3
+        RATE_6Mb     = 4
+        RATE_9Mb     = 5
+        RATE_12Mb    = 6
+        RATE_18Mb    = 7
+        RATE_24Mb    = 8
+        RATE_36Mb    = 9
+        RATE_48Mb    = 10
+        RATE_54Mb    = 11
+      } WMI_BIT_RATE
+
+
+Command Values
+    See command parameters
+
+Reset Values
+    The dynamic rate is determined by the AR6000 device
+
+Restrictions
+    This command is intended for use only during development/debug; it is not
+intended for use in production
+
+See Also
+    “GET_BIT_RATE”
+
+=====================================================================
+
+
+Name
+    SET_BMISS_TIME
+
+Synopsis
+    This command sets the beacon miss (BMISS) time, which the AR6000 hardware use
+    to recognize missed beacons. When an excessive number (15) of consecutive beacons
+    are missed, the AR6000 consider switching to a different BSS. The time can be
+    specified in number of beacons or in TUs.
+
+Command(s)
+    wmiconfig eth1 --setbmissbeacons=<val>
+    wmiconfig eth1 --setbmisstime=<val>
+
+Command Parameters
+    UINT16    bmissTime    Specifies the beacon miss time
+                            [1000...5000] in TUs (1024 ms)
+    UINT16    bmissbeacons  Specifies the number of beacons [5...50]
+
+Command Values
+    None
+
+Reset Values
+    bmissTime is 1500 TUs (1536 ms)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BSS_FILTER
+
+Synopsis
+    The host uses this to inform the AR6000 device of the types of networks about which
+    it wants to receive information from the “BSSINFO” event. As the device performs
+    either foreground or background scans, it applies the filter and sends “BSSINFO”
+    events only for the networks that pass the filter. If any of the  bssFilter or the ieMask
+    filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match
+    for the IEs in the beacons, probe reponses and channel switch action management
+    frame. See also “Scan and Roam” on page C-1.
+
+    The BSS filter command has been enhanced to support IE based filtering. The IEs can
+    be specified as a bitmask through this command using this enum.
+
+Command
+    wmiconfig eth1 –filter = <filter> --ieMask 0x<mask>
+
+Command Parameters
+    UINT8    BssFilter
+
+ Command Values
+    typedef struct {
+        A_UINT8    bssFilter;    See WMI_BSS_FILTER
+        A_UINT32    ieMask;
+    } __ATTRIB_PACK WMI_BSS_FILTER_CMD;
+
+    The ieMask can take this combination of values:
+
+    enum {
+        BSS_ELEMID_CHANSWITCH   = 0x01
+        BSS_ELEMID_ATHEROS      = 0x02,
+    }
+
+Reply Value
+    None
+
+Reset Value
+    BssFilter = NONE_BSS_FILTER (0)
+
+Restrictions
+    None
+
+See Also
+    “CONNECT_CMD”
+
+=====================================================================
+
+
+Name
+    SET_BT_PARAMS
+
+Synopsis
+    This command is used to set the status of a Bluetooth stream or set Bluetooth
+    coexistence register parameters. The stream may be an SCO or an A2DP stream and
+    its status can be started/stopped/suspended/resumed.
+
+Command
+    wmiconfig –setBTparams <paramType> <params>
+
+Command Parameters
+    struct {
+       union {
+            BT_PARAMS_SCO    scoParams;
+            BT_PARAMS_A2DP   a2dpParams;
+            BT_PARAMS_MISC   miscParams;
+            BT_COEX_REGS     regs;
+        } info;
+         A_UINT8 paramType;
+        struct {
+            A_UINT8 noSCOPkts;    Number of SCO packets between consecutive PS-POLLs
+            A_UINT8 pspollTimeout;
+            A_UINT8 stompbt;
+        } BT_PARAMS_SCO;
+        struct {
+            A2DP BT stream parameters
+            A_UINT32   period;
+            A_UINT32   dutycycle;
+            A_UINT8    stompbt;
+        } BT_PARAMS_A2DP;
+        struct {
+            union {
+               WLAN_PROTECT_POLICY_TYPE   protectParams;
+               A_UINT16    wlanCtrlFlags;
+            }info;
+        A_UINT8 paramType;
+        } BT_PARAMS_MISC;
+        struct {
+            BT coexistence registers values
+            A_UINT32    mode;     Coexistence mode
+            A_UINT32    scoWghts; WLAN and BT weights
+            A_UINT32    a2dpWghts;
+            A_UINT32    genWghts;
+            A_UINT32    mode2;    Coexistence mode2
+            A_UINT8    setVal;
+        } BT_COEX_REGS;
+
+Command Values
+    None defined
+
+Reset Value
+    None
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BT_STATUS
+
+Synopsis
+    Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream
+    and its status can be started/stopped/suspended/resumed.
+
+Command
+    wmiconfig –setBTstatus <streamType> <status>
+
+Command Parameters
+    {
+        A_UINT8        streamType;    Stream type
+        A_UINT8        status;    Stream status
+    }WMI_SET_BT_STATUS_CMD;
+
+Command Values
+    {
+        BT_STREAM_UNDEF    = 0
+        BT_STREAM_SCO
+        SCO stream
+        BT_STREAM_A2DP
+        A2DP stream
+        BT_STREAM_MAX
+    } BT_STREAM_TYPE;
+
+    {
+        BT_STATUS_UNDEF    = 0
+        BT_STATUS_START
+        BT_STATUS_STOP
+        BT_STATUS_RESUME
+        BT_STATUS_SUSPEND
+        BT_STATUS_MAX
+    } BT_STREAM_STATUS;
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_CHANNEL_PARAMETERS
+
+Synopsis
+    Configures various WLAN parameters related to channels, sets the wireless mode,
+    and can restrict the AR6000 device to a subset of available channels. The list of
+    available channels varies depending on the wireless mode and the regulatory
+    domain. The device never operates on a channel outside of its regulatory domain. The
+    device starts to scan the list of channels right after this command.
+
+Command
+    wmiconfig eth1 --wmode <mode> <list>
+
+Command Parameters
+    UINT8    phyMode    See Values below.
+    UINT8    numberOfChannels
+        Number of channels in the channel array that
+        follows. If = 0, then the device uses all of the
+        channels permitted by the regulatory domain
+        and by the specified phyMode.
+    UINT16    channel[numberOfChannels]
+        Array listing the subset of channels (expressed
+        as frequencies in MHz) the host wants the
+        device to use. Any channel not permitted by
+        the specified phyMode or by the specified
+        regulatory domain is ignored by the device.
+
+Command Values
+    phyMode = {
+        Wireless mode
+        11a    = 0x01
+        11g    = 0x02
+        11ag   = 0x03
+        11b    = 0x04
+        11g only    = 0x05
+        }
+
+Reset Values
+    phyMode
+    11ag
+    802.11a/g modules
+        11g
+    802.11g module
+    channels
+        Defaults to all channels permitted by the
+        current regulatory domain.
+
+Restrictions
+    This command, if issued, should be issued soon after reset and prior to the first
+    connection. This command should only be issued in the DISCONNECTED state.
+
+=====================================================================
+
+
+Name
+    SET_DISC_TIMEOUT
+
+Synopsis
+    The host uses this command to configure the amount of time that the AR6000 should
+    spend when it attempts to reestablish a connection after losing link with its current
+    BSS. If this time limit is exceeded, the AR6000 send a “DISCONNECT” event. After
+    sending the “DISCONNECT” event the AR6000 continues to attempt to reestablish a
+    connection, but they do so at the interval corresponding to a foreground scan as
+    established by the “SET_SCAN_PARAMS” command.
+
+    A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming,
+    so that the AR6000 will not perform any scans after sending a “DISCONNECT”
+    event to the host. The state is maintained until a shutdown or host sets different
+    timeout value from 0.
+
+Command
+    wmiconfig eth1 --disc=<timeout in seconds>
+
+Command Parameters
+    UINT8    disconnectTimeout
+        Specifies the time limit (in seconds) after
+        which a failure to reestablish a connection
+        results in a “DISCONNECT” event
+
+Command Values
+    None
+
+Reset Values
+    disconnectTimeout is 10 seconds
+
+Restrictions
+    This command can only be issued while in a DISCONNECTED state
+
+=====================================================================
+
+
+Name
+    SET_FIXRATES
+
+Synopsis
+    By default, the AR6000 device uses all PHY rates based on mode of operation. If the
+    host application requires the device to use subset of supported rates, it can set those
+    rates with this command. In 802.11g mode, the AR6000 device takes the entire
+    802.11g basic rate set and the rates specified with this command and uses it as the
+    supported rate set.
+
+    This rate set is advertised in the probe request and the assoc/re-assoc request as
+    supported rates. Upon successful association, the device modifies the rate set pool
+    using the: intersection of AP-supported rates with the union of the 802.11g basic rate
+    set and rates set using this command. The device picks transmission rates from this
+    pool based on a rate control algorithm.
+
+Command
+    TBD
+
+Command Parameters
+    A_UINT16    fixRateMask;
+        The individual bit is an index for rate table,
+        and setting the that index to 1 would set that
+        corresponding rate. E.g., fixRateMask = 9
+        (1001) sets 1 Mbps and 11 Mbps.
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “GET_FIXRATES”
+
+=====================================================================
+
+
+Name
+    SET_WHAL_PARAM
+
+Synopsis
+    An internal AR6000 command that is used to set certain hardware parameters. The
+    description of this command is in $WORKAREA/include/halapi.h.
+
+Command
+    TBD
+
+Command Parameters
+    ATH_HAL_SETCABTO_CMDID
+        Sets the timeout waiting for the multicast
+        traffic after a DTIM beacon (in TUs).
+
+Command Values
+    None
+
+Reset Value
+    Default = 10 TUs
+
+Restrictions
+    This command should be executed before issuing a connect command.
+
+=====================================================================
+
+
+Name
+    SET_HOST_SLEEP_MODE
+
+Synopsis
+    The host uses this command to set the host mode to asleep or awake. All packets are
+    delivered to the host when the host mode is awake. When host mode is asleep, only if
+    WoW is enabled and the incoming packet matches one of the specified WoW
+    patterns, will the packet be delivered to the host. The host will also be woken up by
+    the target for pattern-matching packets and important events.
+
+Command
+    wmiconfig –sethostmode=<asleep/awake>
+
+Command Parameters
+    A_BOOL    awake    Set the host mode to awake
+    A_BOOL    asleep   Set the host mode to asleep
+
+Command Values
+    1 = awake, 0 = asleep
+
+Reset Value
+    None defined (default host mode is awake)
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_IBSS_PM_CAPS
+
+Synopsis
+    Used to support a non-standard power management scheme for an ad hoc wireless
+    network consisting of up to eight stations (STAs) that support this form of power
+    saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc
+    networks is required to use this command effectively.
+
+Command
+    wmiconfig eth1 --ibsspmcaps --ps=<enable/disable>
+        --aw=<ATIM Windows in ms>
+        --ttl=<Time to live in number of beacon periods>
+        --to=<timeout in ms>
+
+Command Parameters
+    UINT8    power_saving
+        = 0
+        The non-standard power saving scheme is
+        disabled and maximum throughput (with no
+        power saving) is obtained.
+
+        = 1
+        Ad hoc power saving scheme is enabled (but
+        throughput may be decreased)
+
+    UINT16    atim_windows
+        Specifies the length (in ms) of the ad hoc traffic
+        indication message (ATIM) windows used in an ad
+        hoc network. All Atheros-based STAs that join the
+        network use this duration ATIM window.
+
+    The duration is communicated between wireless
+    STAs through an IE in beacons and probe responses.
+
+    The host sets atim_windows to control trade-offs
+    between power use and throughput. The value
+    chosen should be based on the beacon interval (see
+    the “SET_BEACON_INT” command) on the
+    expected number of STAs in the IBSS, and on the
+    amount of traffic and traffic patterns between STAs.
+
+    UINT16    timeout_value
+        Specifies the timeout (in ms). The value is the same
+        for all ad hoc connections, but tracks separately for
+        each.
+
+        Applicable only for a beacon period and used to
+        derive actual timeout values on the Tx and Rx sides.
+        On the Tx side, the value defines a window during
+        which the STA accepts the frame(s) from the host for a
+        particular connection. Until closed, the window
+        restarts with every frame received from the host. On
+        the Rx side, indicates the time until which the STA
+        continues accepting frames from a particular
+        connection. The value resets with every frame
+        received. The value can be used to determine the
+        trade off between throughput and power.
+        Default = 10 ms
+
+    UINT8    ttl
+        Specifies the value in number of beacon periods. The
+        value is used to set a limit on the time until which a
+        frame is kept alive in the AR6001 before being
+        discarded. Default = 5
+
+Command Values
+    None
+
+Reset Values
+    By default, power_saving is enabled with atim_window = 20 ms
+
+Restrictions
+    Can only be issued before the AR6000 starts an ad hoc network
+
+See Also
+    “SET_BEACON_INT”
+
+=====================================================================
+
+
+
+Name
+    SET_LISTEN_INT
+
+Synopsis
+    The host uses this command to request a listen interval, which determines how often
+    the AR6000 device should wake up and listen for traffic. The listen interval can be set
+    by the TUs or by the number of beacons. The device may not be able to comply with
+    the request (e.g., if the beacon interval is greater than the requested listen interval, the
+    device sets the listen interval to the beacon interval). The actual listen interval used
+    by the device is available in the “CONNECT” event.
+
+Command
+    wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000>
+
+    --listenbeacons=<#of beacons, can range from 1 to 50>
+
+Command Parameters
+    UINT16    listenInterval
+        Specifies the listen interval in Kms
+        (1024 ms), ranging from 100 to 1000
+
+    UINT16    listenbeacons
+        Specifies the listen interval in beacons,
+        ranging from 1 to 50
+
+Command Values
+    None
+
+Reset Values
+    The device sets the listen interval equal to the beacon interval of the AP it associates
+    to.
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_LPREAMBLE
+
+Synopsis
+    Overrides the short preamble capability of the AR6000 device
+
+Command
+    TBD
+
+Command Parameters
+    WMI_LPREAMBLE_DISABLED
+        The device is short-preamble capable
+
+    WMI_LPREAMBLE_ENABLED
+        The device supports only the long-
+    preamble mode
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_MAX_SP_LEN
+
+Synopsis
+    Set the maximum service period; indicates the number of packets the AR6001 can
+    receive from the AP when triggered
+
+Command
+    wmiconfig eth1 --setMaxSPLength <maxSPLen>
+
+Command Parameters
+    UINT8    maxSPLen
+        An APSD_SP_LEN_TYPE value
+
+Command Values
+    {
+        DELIVER_ALL_PKT  = 0x0
+        DELIVER_2_PKT    = 0x1
+        DELIVER_4_PKT    = 0x2
+        DELIVER_6_PKT    = 0x3
+    }APSD_SP_LEN_TYPE
+
+
+Reset Values
+    maxSPLen is DELIVER_ALL_PKT
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_OPT_MODE
+
+Synopsis
+    Special feature, sets the special mode on/off
+
+Command
+    wmiconfig eth1 --mode <mode>
+    Set the optional mode, where mode is special or off
+
+Command Parameters
+    enum {
+        SPECIAL_OFF
+        SPECIAL_ON
+    } OPT_MODE_TYPE;
+
+Command Values
+
+Reset Value
+    Mode = Off
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_PMKID
+
+Synopsis
+    The host uses this command to enable or disable a pairwise master key ID (PMKID)
+    in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a
+    DISCONNECT command from the host. Individual entries in the cache might be
+    deleted as the AR6000 detect new APs and decides to remove old ones.
+
+Command
+    wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff>
+    --bsspmkid=<pmkid>
+
+Command Parameters
+    UINT8    bssid[6]
+        The MAC address of the AP that the
+        PMKID corresponds to (6 bytes in hex
+        format)
+
+    UINT8    enable
+        Either PMKID_DISABLE (0) to disable
+        the PMKID or PMKID_ENABLE (1) to
+        enable it (16 bytes in hex format)
+
+    UINT8    pmkid[16]
+        Meaningful only if enable is
+        PMKID_ENABLE, when it is the PMKID
+        that the AR6000 should use on the next
+        reassociation with the specified AP
+
+Command Values
+    enable
+    = 0 (disable), 1 (enable)
+    PKMID enabled/disabled
+
+Reset Values
+    None defined
+
+Restrictions
+    Only supported in infrastructure networks
+
+=====================================================================
+
+
+Name
+    SET_PMKID_LIST_CMD
+
+Synopsis
+    Configures the list of PMKIDs on the firmware.
+
+Command
+    wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1>
+    ... --pmkid=<pmkid_n>
+
+    Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16
+    bytes in hex format)
+
+Command Parameters
+    {
+        A_UINT8 pmkid[WMI_PMKID_LEN];
+    } __ATTRIB_PACK WMI_PMKID;
+
+    {
+        A_UINT32 numPMKID;
+        WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
+    } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD;
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    Supported only in infrastructure modes
+
+=====================================================================
+
+
+Name
+    SET_POWER_MODE
+
+Synopsis
+    The host uses this command to provide the AR6000 device with guidelines on the
+    desired trade-off between power utilization and performance.
+
+        In normal power mode, the device enters a sleep state if they have nothing to do,
+        which conserves power but may cost performance as it can take up to 2 ms to
+        resume operation after leaving sleep state.
+
+        In maximum performance mode, the device never enters sleep state, thus no time
+        is spent waking up, resulting in higher power consumption and better
+        performance.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8    powerMode
+        WMI_POWER_MODE value
+    {
+        REC_POWER   = 1
+            (Recommended setting) Tries to conserve
+            power without sacrificing performance
+        MAX_PERF_POWER    = 2
+            Setting that maximizes performance at
+            the expense of power
+
+            All other values are reserved
+    } WMI_POWER_MODE
+
+Command Values
+    See command parameters
+
+Reset Values
+    powerMode is REC_POWER
+
+Restrictions
+    This command should only be issued in the DISCONNECTED state for the
+    infrastructure network.
+
+            For a PM-disabled ad hoc network, the power mode should remain in
+            MAX_PERF_POWER.
+
+            For a PM-enabled ad hoc network, the device can have REC_POWER or
+            MAX_PERF_POWER set, but either way it must follow the power save ad hoc
+            protocol. The host can change power modes in the CONNECTED state.
+
+    Host changes to the PS setting when the STA is off the home channel take no effect
+    and cause a TARGET_PM_FAIL event.
+
+=====================================================================
+
+
+Name
+    SET_POWER_PARAMS
+
+Synopsis
+    The host uses this command to configure power parameters
+
+Command
+    wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL>
+    --dp=<DTIM policy: ignore/normal/stick>
+
+Command Parameters
+    UINT16    idle_period
+        Length of time (in ms) the AR6000 device
+        remains awake after frame Rx/Tx before going
+        to SLEEP state
+
+    UINT16    pspoll_number
+            The number of PowerSavePoll (PS-poll)
+            messages the device should send before
+            notifying the AP it is awake
+
+    UINT16    dtim_policy
+            A WMI_POWER_PARAMS_CMD value
+
+    {
+        IGNORE_DTIM    =1
+            The device does not listen to any content after
+            beacon (CAB) traffic
+        NORMAL_DTIM    = 2
+            DTIM period follows the listen interval (e.g., if
+            the listen interval is 4 and the DTIM period is 2,
+            the device wakes up every fourth beacon)
+        STICK_DTIM    = 3
+            Device attempt to receive all CAB traffic (e.g., if
+            the DTIM period is 2 and the listen interval is 4,
+            the device wakes up every second beacon)
+    } WMI_POWER_PARAMS_CMD
+
+Command Parameters
+    See command parameters
+
+Reset Values
+    idle_period
+        200 ms
+
+    pspoll_number
+    = 1
+
+    dtim_policy
+    = NORMAL_DTIM
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_POWERSAVE_PARAMS
+
+Synopsis
+    Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and
+    the two ASPD TIM policies
+
+Command
+    wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms>
+    --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/
+    adhere> --simulatedAPSDTimPolicy=<ignore/adhere>
+
+Command Parameters
+    typedef struct {
+        A_UINT16    psPollTimeout;
+            Timeout (in ms) after sending PS-POLL; the
+            AR6000 device sleeps if it does not receive a
+            data packet from the AP
+
+        A_UINT16    triggerTimeout;
+            Timeout (in ms) after sending a trigger; the
+            device sleeps if it does not receive any data
+            or null frame from the AP
+
+        APSD_TIM_POLICY    apsdTimPolicy;
+            TIM behavior with queue APSD enabled
+
+        APSD_TIM_POLICY    simulatedAPSD
+
+        TimPolicy;
+            TIM behavior with simulated APSD
+            enabled
+
+    typedef enum {
+        IGNORE_TIM_ALL_QUEUES_APSD = 0,
+        PROCESS_TIM_ALL_QUEUES_APSD = 1,
+        IGNORE_TIM_SIMULATED_APSD = 2,
+        POWERSAVE_TIMERS_POLICY = 3,
+    } APSD_TIM_POLICY;
+
+Command Values
+    None
+
+Reset Values
+    psPollTimeout is 50 ms; triggerTimeout is 10 ms;
+    apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD;
+    simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY
+
+Restrictions
+    When this command is used, all parameters must be set; this command does not
+    allow setting only one parameter.
+
+=====================================================================
+
+
+Name
+    SET_PROBED_SSID
+
+Synopsis
+    The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX
+    (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID
+    table. By default, the device actively looks for only the SSID specified in the
+    “CONNECT_CMD” command, and only when the regulatory domain allows active
+    probing. With this command, specified SSIDs are probed for, even if they are hidden.
+
+Command
+    wmiconfig eth1 --ssid=<ssid> [--num=<index>]
+
+Command Parameters
+    {
+        A_UINT8    numSsids
+            A number from 0 to
+            MAX_PROBED_SSID_INDEX indicating
+            the active SSID table entry index for this
+            command (if the specified entry index
+            already has an SSID, the SSID specified in
+            this command replaces it)
+
+        WMI_PROBED_SSID_INFO    probedSSID[1]
+    } WMI_PROBED_SSID_CMD
+
+    {
+        A_UINT8    flag
+            WMI_SSID_FLAG indicates the current
+            entry in the active SSID table
+        A_UINT8    ssidLength
+            Length of the specified SSID in bytes.
+            If = 0, the entry corresponding to the
+            index is erased
+        A_UINT8    ssid[32]
+            SSID string actively probed for when
+            permitted by the regulatory domain
+    } WMI_PROBED_SSID_INFO
+
+Command Values
+    WMI_SSID_FLAG
+    {
+         DISABLE_SSID_FLAG    = 0
+            Disables entry
+        SPECIFIC_SSID_FLAG    = 1
+            Probes specified SSID
+        ANY_SSID_FLAG    = 2
+            Probes for any SSID
+    } WMI_SSID_FLAG
+
+Reset Value
+    The entries are unused.
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_REASSOC_MODE
+
+Synopsis
+    Specify whether the disassociated frame should be sent or not upon reassociation.
+
+Command
+    wmiconfig eth1 --setreassocmode <mode>
+
+Command Parameters
+    UINT8    mode
+
+Command Values
+    mode
+        = 0x00
+        Send disassoc to a previously connected AP
+        upon reassociation
+        = 0x01
+        Do not send disassoc to previously connected
+        AP upon reassociation
+
+Reset Values
+    None defined
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_RETRY_LIMITS
+
+Synopsis
+    Allows the host to influence the number of times that the AR6000 device should
+    attempt to send a frame before they give up.
+
+Command
+    wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries>
+    <enableNotify>
+
+Command Parameters
+    {
+        UINT8    frameType
+            A WMI_FRAMETYPE specifying
+            which type of frame is of interest.
+        UINT8    trafficClass
+            Specifies a traffic class (see
+            “CREATE_PSTREAM”). This
+            parameter is only significant when
+            frameType = DATA_FRAMETYPE.
+        UINT8    maxRetries
+            Maximum number of times the
+            device attempts to retry a frame Tx,
+            ranging from WMI_MIN_RETRIES
+            (2) to WMI_MAX_RETRIES (15). If
+            the special value 0 is used,
+            maxRetries is set to 15.
+        A_UINT8    enableNotify
+            Notify when enabled
+    } WMI_RETRY_LIMIT_INFO
+
+    {
+        A_UINT8    numEntries
+        WMI_RETRY_LIMIT_INFO  retryLimitInfo[1]
+    } WMI_SET_RETRY_LIMITS_CMD
+
+Command Values
+    {
+        MGMT_FRAMETYPE    = 0    Management frame
+        CONTROL_FRAMETYPE = 1    Control frame
+        DATA_FRAMETYPE    = 2    Data frame
+    } WMI_FRAMETYPE
+
+Reset Values
+    Retries are set to 15
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_ROAM_CTRL
+
+Synopsis
+    Affects how the AR6000 device selects a BSS. The host uses this command to set and
+    enable low RSSI scan parameters. The time period of low RSSI background scan is
+    mentioned in scan period. Low RSSI scan is triggered when the current RSSI
+    threshold (75% of current RSSI) is equal to or less than scan threshold.
+
+    Low RSSI roam is triggered when the current RSSI threshold falls below the roam
+    threshold and roams to a better AP by the end of the scan cycle. During Low RSSI
+    roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during
+    scan, it roams immediately to it instead of waiting for the end of the scan cycle. See
+    also “Scan and Roam” on page C-1.
+
+Command
+    wmiconfig --roam <roamctrl> <info>, where info is <scan period>
+    <scan threshold> <roam threshold> <roam rssi floor>
+
+Command Parameters
+    A_UINT8    roamCtrlType;
+
+Command Values
+    WMI_FORCE_ROAM     = 1
+    Roam to the specified BSSID
+
+    WMI_SET_ROAM_MODE  = 2
+    Default, progd bias, no roam
+
+    WMI_SET_HOST_BIAS  = 3
+    Set the host bias
+
+    WMI_SET_LOWRSSI_SCAN_PARAMS  = 4
+    Info parameters
+
+    A_UINT8    bssid[ATH_MAC_LEN];
+    WMI_FORCE_ROAM
+
+    A_UINT8    roamMode;
+    WMI_SET_ROAM_MODE
+
+    A_UINT8    bssBiasInfo;
+    WMI_SET_HOST_BIAS
+
+    A_UINT16    lowrssi_scan_period;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_INT16
+    lowrssi_scan_threshold;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_INT16    lowrssi_roam_threshold;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_UINT8    roam_rssi_floor;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+Reset Value
+    None defined (default lowrssi scan is disabled. Enabled only when scan period is set.)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_RTS
+
+Synopsis
+    Decides when RTS should be sent.
+
+Command
+    wmiconfig eth1 --setRTS <pkt length threshold>
+
+Command Parameters
+    A_UINT16
+    threshold;
+    Command parameter threshold in bytes. An RTS is
+    sent if the data length is more than this threshold.
+    The default is to NOT send RTS.
+
+Command Values
+    None
+
+Reset Value
+    Not to send RTS.
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_SCAN_PARAMS
+
+Synopsis
+    The host uses this command to set the AR6000 scan parameters, including the duty
+    cycle for both foreground and background scanning. Foreground scanning takes
+    place when the AR6000 device is not connected, and discovers all available wireless
+    networks to find the best BSS to join. Background scanning takes place when the
+    device is already connected to a network and scans for potential roaming candidates
+    and maintains them in order of best to worst. A second priority of background
+    scanning is to find new wireless networks.
+
+    The device initiates a scan when necessary. For example, a foreground scan is always
+    started on receipt of a “CONNECT_CMD” command or when the device cannot find
+    a BSS to connect to. Foreground scanning is disabled by default until receipt of a
+    CONNECT command. Background scanning is enabled by default and occurs every
+    60 seconds after the device is connected.
+
+    The device implements a binary backoff interval for foreground scanning when it
+    enters the DISCONNECTED state after losing connectivity with an AP or when a
+    CONNECT command is received. The first interval is ForegroundScanStartPeriod,
+    which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
+    If the host terminates a connection with DISCONNECT, the foreground scan period
+    is ForegroundScanEndPeriod. All scan intervals are measured from the time a full
+    scan ends to the time the next full scan starts. The host starts a scan by issuing a
+    “START_SCAN” command. See also “Scan and Roam” on page C-1.
+
+Command
+    wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> --
+    act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags
+    <connScan> <scanConnected> <activeScan> <reportBSSINFO>
+
+Command Parameters
+    UINT16    fgStartPeriod
+        First interval used by the device when it
+        disconnects from an AP or receives a
+        CONNECT command, specified in seconds (0–
+        65535). If = 0, the device uses the reset value.
+        If = 65535, the device disables foreground
+        scanning.
+
+    UINT16    fgEndPeriod
+        The maximum interval the device waits between
+        foreground scans specified in seconds (from
+        ForegroundScanStartPeriod to 65535). If = 0, the
+        device uses the reset value.
+
+    UINT16    bgScanPeriod
+        The period of background scan specified in
+        seconds (0–65535). By default, it is set to the reset
+        value of 60 seconds. If 0 or 65535 is specified, the
+        device disables background scanning.
+
+    UINT16    maxactChDwellTime
+        The period of time the device stays on a
+        particular channel while active scanning. It is
+        specified in ms (10–65535). If the special value of
+        0 is specified, the device uses the reset value.
+
+    UINT16    PasChDwellTime
+        The period of time the device remains on a
+        particular channel while passive scanning. It is
+        specified in ms (10–65535). If the special value of
+        0 is specified, the device uses the reset value.
+
+    UINT8    shortScanRatio
+        Number of short scans to perform for each
+        long scan.
+
+    UINT8    scanCtrlFlasgs
+
+    UINT16    minactChDwellTime
+        Specified in ms
+
+    UINT32    maxDFSchActTime
+        The maximum time a DFS channel can stay
+        active before being marked passive, specified in
+        ms.
+
+Command Values
+    None
+
+Reset Values
+    ForegroundScanStart
+Period
+        1 sec
+
+    ForegroundScanEndPeriod
+        60 sec
+
+    BackgroundScanPeriod
+        60 sec
+
+    ActiveChannelDwellTime
+        105 ms
+
+=====================================================================
+
+
+Name
+    SET_TKIP_COUNTERMEASURES
+
+Synopsis
+    The host issues this command to tell the target whether to enable or disable TKIP
+    countermeasures.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8    WMI_TKIP_CM_ENABLE
+        Enables the countermeasures
+
+
+    UINT8    TKIP_CM_DISABLE
+        Disables the countermeasures
+
+Command Values
+    None
+
+Reset Values
+    By default, TKIP MIC reporting is disabled
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_TX_PWR
+
+Synopsis
+    The host uses this command to specify the Tx power level of the AR6000. Cannot be
+    used to exceed the power limit permitted by the regulatory domain. The maximum
+    output power is limited in the chip to 31.5 dBm; the range is 0 – 31.5 dbm.
+
+Command
+    wmiconfig --power <dbM>
+
+Command Parameters
+    UINT8    dbM
+        The desired Tx power specified in dbM.
+        If = 0, the device chooses the maximum
+        permitted by the regulatory domain.
+
+Command Values
+    None
+
+Reset Values
+    The maximum permitted by the regulatory domain
+
+Restrictions
+    None
+
+See Also
+    “GET_TX_PWR”
+
+
+=====================================================================
+
+Name
+    SET_VOICE_PKT_SIZE
+
+Synopsis
+    If an AP does not support WMM, it has no way to differentiate voice from data.
+    Because the voice packet is typically small, packet in size less than voicePktSize are
+    assumed to be voice, otherwise it is treated as data.
+
+Command
+    wmiconfig eth1 --setVoicePktSize <size-in-bytes>
+
+Command Parameters
+    UINT16    voicePktSize
+        Packet size in octets
+
+Command Values
+    None
+
+Reset Values
+    voicePktSize default is 400 bytes
+
+Restrictions
+    No effect if WMM is unavailable
+
+
+=====================================================================
+
+Name
+    SET_WMM
+
+Synopsis
+    Overrides the AR6000 device WMM capability
+
+Command
+    wmiconfig eth1 --setwmm <enable>
+
+Command Parameters
+    WMI_WMM_ENABLED
+        Enables WMM
+
+    WMI_WMM_DISABLED
+        Disables WMM support
+
+Command Values
+    0 = disabled
+    1 = enabled
+
+Reset Value
+    WMM Disabled
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_WMM_TXOP
+
+Synopsis
+    Configures TxOP Bursting when sending traffic to a WMM capable AP
+
+Command
+    wmiconfig eth1 --txopbursting <burstEnable>
+
+    <burstEnable>
+        = 0
+    Disallow TxOp bursting
+
+        = 1
+    Allow TxOp bursting
+
+Command Parameters
+    txopEnable
+        = WMI_TXOP_DISABLED
+        Disabled
+
+        = WMI_TXOP_ENABLED
+        Enabled
+
+Command Values
+    txopEnable
+        = 0    Disabled
+
+        = 1    Enabled
+
+Reset Value
+    Bursting is off by default
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_WOW_MODE
+
+Synopsis
+    The host uses this command to enable or disable the WoW mode. When WoW mode
+    is enabled and the host is asleep, pattern matching takes place at the target level.
+    Only packets that match any of the pre-specified WoW filter patterns, will be passed
+    up to the host. The host will also be woken up by the target. Packets which do not
+    match any of the WoW patterns are discarded.
+
+Command
+    wmiconfig –setwowmode <enable/disable>
+
+Command Parameters
+    A_BOOL    enable_wow
+        Enable or disable WoW:
+
+Command Values
+        = 0
+    Disable WoW
+
+        = 1
+    Enable WoW
+
+Reset Value
+    None defined (default WoW mode is disabled).
+
+Restrictions
+    None
+
+See Also
+    “GET_WOW_LIST”
+
+
+=====================================================================
+
+Name
+    SET_WSC_STATUS
+
+Synopsis
+    The supplicant uses this command to inform the target about the status of the WSC
+    registration protocol. During the WSC registration protocol, a flag is set so the target
+    bypasses some of the checks in the CSERV module. At the end of the registration, this
+    flag is reset.
+
+Command
+    N/A
+
+Command Parameters
+    A_BOOL status
+        = 1    WSC registration in progress
+        = 0    WSC protocol not running
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined (default = 0)
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SNR_THRESHOLD_PARAMS
+
+Synopsis
+    Configures how the AR6000 device monitors and reports SNR of the connected BSS,
+    used as a link quality metric.
+
+Command
+    --snrThreshold <weight> <upper_threshold_1> ...
+    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+    <pollTimer>
+
+Command Parameters
+    <weight>
+        Share with rssiThreshold. Range in [1, 16], used
+        in the formula to calculate average RSSI
+
+    <upper_threshold_x>
+        Above thresholds expressed in db, in ascending
+        order
+
+    <lower_threshold_x>
+        Below thresholds expressed in db, in ascending
+        order
+
+    <pollTimer>
+        The signal strength sampling frequency in
+        seconds. If polltime = 0, signal strength
+        sampling is disabled
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    START_SCAN
+
+Synopsis
+    The host uses this command to start a long or short channel scan. All future scans are
+    relative to the time the AR6000 device processes this command. The device performs
+    a channel scan on receipt of this command, even if a scan was already in progress.
+    The host uses this command when it wishes to refresh its cached database of wireless
+    networks. The isLegacy field will be removed (0 for now) because it is achieved by
+    setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also
+    “Scan and Roam”
+
+Command
+    wmiconfig eth1 --startscan <scan type> <forcefgscan> 0
+    <homeDwellTime> <forceScanInterval>
+
+Command Parameters
+    UINT8    scanType
+        WMI_SCAN_TYPE
+
+Command Values
+    {
+        WMI_LONG_SCAN    =0x0
+            Requests a full scan
+        WMI_SHORT_SCAN   =0x1
+            Requests a short scan
+    } WMI_SCAN_TYPE
+
+    A_BOOL    forceFgScan
+        forceFgScan
+        = 0
+        Disable the foreground scan
+
+        forceFgScan
+        = 1
+        Forces a foreground scan
+
+    A_UINT32    homeDwellTime
+        Maximum duration in the home
+        channel (in ms)
+
+    A_UINT32     forceScanInterval
+        Time interval between scans (in ms)
+
+    A_UINT32     scanType
+        WMI_SCAN_TYPE
+
+Reset Value
+    Disable forcing foreground scan
+
+Restrictions
+    isLegacy field will no longer be supported (pass as 0 for now)
+
+
+=====================================================================
+
+Name
+    SYNCHRONIZE
+
+Synopsis
+    The host uses this command to force a synchronization point between the command
+    and data paths
+
+Command
+    TBD
+
+Command Parameters
+    None
+
+
+
+Command Values
+    None
+
+
+
+Reset Values
+    None
+
+
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    TARGET_ERROR_REPORT_BITMASK
+
+Synopsis
+    Allows the host to control “ERROR_REPORT” events from the AR6000 device.
+
+        If error reporting is disabled for an error type, a count of errors of that type is
+        maintained by the device.
+
+        If error reporting is enabled for an error type, an “ERROR_REPORT” event is
+        sent when an error occurs and the error report bit is cleared.
+
+    Error counts for each error type are available through the “GET_TARGET_STATS”
+    command.
+
+Command
+    wmiconfig eth1 --setErrorReportingBitmask
+
+Command Parameters
+    UINT32    bitmask
+        Represents the set of
+        WMI_TARGET_ERROR_VAL error types
+        enabled for reporting
+
+Command Values
+    {
+        WMI_TARGET_PM_ERR_FAIL    = 0x00000001
+            Power save fails (only two cases):
+               Retry out of null function/QoS null
+               function to associated AP for PS
+               indication'
+               Host changes the PS setting when
+               STA is off home channel
+
+        WMI_TARGET_KEY_NOT_FOUND    = 0x00000002
+            No cipher key
+        WMI_TARGET_DECRYPTION_ERR   = 0x00000004
+            Decryption error
+        WMI_TARGET_BMISS            = 0x00000008
+            Beacon miss
+        WMI_PSDISABLE_NODE_JOIN     = 0x00000010
+            A non-PS-enabled STA joined the
+            PS-enabled network
+        WMI_TARGET_COM_ERR          = 0x00000020
+            Host/target communication error
+        WMI_TARGET_FATAL_ERR        = 0x00000040
+            Fatal error
+    } WMI_TARGET_ERROR_VAL
+
+Reset Values
+    Bitmask is 0, and all error reporting is disabled
+
+Restrictions
+    None
+
+
+=====================================================================
+WMI Events
+
+Event
+    Description
+    Page
+
+
+BSSINFO
+    Contains information describing BSSs collected during a scan
+
+CAC_EVENTID
+    Indicates signalling events in admission control
+
+CMDERROR
+    The AR6000 device encounters an error while attempting to process
+    a command
+
+CONNECT
+    The device has connected to a wireless network
+
+DISCONNECT
+    The device lost connectivity with a wireless network
+
+ERROR_REPORT
+    An error has occurred for which the host previously requested
+    notification with the command
+    “TARGET_ERROR_REPORT_BITMASK”
+
+EXTENSION
+    WMI extension event
+
+GET_PMKID_LIST_EVENT
+    Created in response to a “GET_PMKID_LIST_CMD” command
+
+GET_WOW_LIST_EVENT
+    Response to the wmiconfig “GET_WOW_LIST” command to
+    retrieve the configured WoW patterns
+
+NEIGHBOR_REPORT
+    Neighbor APs that match the current profile were detected
+
+OPT_RX_FRAME_EVENT
+    (Special feature) informs the host of the reception of a special frame
+
+PSTREAM_TIMEOUT
+    A prioritized stream has been idle for a specified interval
+
+READY
+    The AR6000 device is ready to accept commands
+
+REGDOMAIN
+    The regulatory domain has changed
+
+REPORT_ROAM_DATA_EVENT
+    Reports the roam time calculations made by the device
+    (generated with a special build)
+    —
+
+REPORT_STATISTICS
+    Reply to a “GET_TARGET_STATS” command
+
+ROAM_TBL_EVENT
+    Reports the roam table
+
+RSSI_THRESHOLD
+    Signal strength from the connected AP has crossed the threshold
+    defined in the “RSSI_THRESHOLD_PARAMS” command
+
+SCAN_COMPLETE_EVENT
+    A scan has completed (added status SCAN_ABORTED in release 2.0)
+
+TEST_EVENT
+    Event generated by the TCMD
+
+TKIP_MICERROR
+    TKIP MIC errors were detected
+
+=====================================================================
+
+Name
+    BSSINFO
+
+Synopsis
+    Contains information describing one or more BSSs as collected during a scan.
+    Information includes the BSSID, SSID, RSSI, network type, channel, supported rates,
+    and IEs. BSSINFO events are sent only after the device receives a beacon or probe-
+    response frame that pass the filter specified in the “SET_BSS_FILTER” command.
+    BSSINFO events consist of a small header followed by a copy of the beacon or probe
+    response frame. The 802.11 header is not present. For formats of beacon and probe-
+    response frames please consult the IEEE 802.11 specification.
+
+    The beacons or probe responses containing the IE specified by the
+    WMI_BSS_FILTER_CMD are passed to the host through the
+    WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that
+    were detected in the management frame. The frame type field has been extended to
+    indicate action management frames. This would be helpful to route these frames
+    through the same event mechanism as used by the beacon processing function.
+
+    If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant
+    because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the
+    beacons/probe respones, then the ieMask match dictates whether the BSSINFO
+    event is sent to the host. In the case of action management frames, the ieMask is the
+    filter that is applied.
+
+Event ID
+    0x1004
+
+Event Parameters
+    typedef struct {
+        A_UINT16    channel;
+            Specifies the frequency (in MHz) where the
+            frame was received
+        A_UINT8    frameType;
+            A WMI_BI_FTYPE value
+        A_UINT8    snr;
+        A_INT16    rssi;
+            Indicates signal strength
+        A_UINT8    bssid[ATH_MAC_LEN];
+        A_UINT32    ieMask;
+    } _ATTRIB_PACK_WMI_BSS_INFO_HDR;
+
+    Beacon or Probe Response Frame
+
+Event Values
+    {
+        BEACON_FTYPE    = 0x1
+            Indicates a beacon frame
+        PROBERESP_FTYPE
+            Indicates a probe response frame
+        ACTION_MGMT_FTYPE
+     } WMI_BI_FTYPE
+
+=====================================================================
+
+Name
+    CAC_EVENTID
+
+Synopsis
+    Indicates signalling events in admission control. Events are generated when
+    admission is accepted, rejected, or deleted by either the host or the AP. If the AP does
+    not respond to an admission request within a timeout of 500 ms, an event is
+    generated to the host.
+
+Event ID
+    0x1011
+
+Event Parameters
+    UINT8
+    ac
+    Access class pertaining to the
+signalling
+
+    UINT8    cac_indication
+        Type of indication; indications are
+        listed in WMI_CAC_INDICATION
+
+    UINT8    statusCode
+        AP response status code for a
+        request
+
+    UINT8    tspecSuggestion[63]
+        Suggested TSPEC from AP
+
+Event Values
+    {
+        CAC_INDICATION_ADMISSION = 0x00
+        CAC_INDICATION_ADMISSION_RESP    = 0x01
+        CAC_INDICATION_DELETE    = 0x02
+        CAC_INDICATION_NO_RESP   = 0x03
+    } WMI_CAC_INDICATION
+
+
+=====================================================================
+
+
+Name
+    CMDERROR
+
+Synopsis
+    Indicates that the AR6000 device encountered an error while attempting to process a
+    command. This error is fatal and indicates that the device requires a reset.
+
+Event ID
+    0x1005
+
+Event Parameters
+    UINT16    commandId
+        Corresponds to the command which generated
+        the error
+    UINT8    errorCode
+        A WMI_ERROR_CODE value
+
+Event Values
+    {
+        INVALID_PARAM    = 1
+            Invalid parameter
+        ILLEGAL_STATE    = 2
+            Illegal state
+        INTERNAL_ERROR   = 3
+            Internal Error
+        All other values reserved
+    } WMI_ERROR_CODE
+
+
+=====================================================================
+
+
+Name
+    CONNECT
+
+Synopsis
+    Signals that the AR6000 connected to a wireless network. Connection occurs due to a
+    “CONNECT” command or roaming to a new AP. For infrastructure networks, shows
+    that the AR6000 successfully performed 802.11 authentication and AP association.
+
+Event ID
+    0x1002
+
+Event Parameters
+    UINT16    channel
+        Channel frequency (in MHz) of the network the
+        AR6000 are connected to
+
+    UINT8    bssid[6]
+        MAC address of the AP the AR6000 are
+        connected to or the BSSID of the ad hoc
+        network
+
+    UINT16    listenInterval
+        Listen interval (in Kms) that the AR6000 are
+        using
+
+    UINT 8    beaconIeLen
+        Length (in bytes) of the beacon IEs
+
+    UINT8    assocInfo
+        Pointer to an array containing beacon IEs,
+        followed first by association request IEs then by
+        association response IEs
+
+    UINT8    assocReqLen
+        Length (in bytes) of the assocReqIEs array
+
+    UINT8    assocRespLen
+        Length (in bytes) of the assocRespIEs array
+
+Event Values
+    None defined
+
+=====================================================================
+
+
+Name
+    DISCONNECT
+
+Synopsis
+    Signals that the AR6000 device lost connectivity with the wireless network.
+    DISCONENCT is generated when the device fails to complete a “CONNECT”
+    command or as a result of a transition from a connected state to disconnected state.
+
+    After sending the “DISCONNECT” event the device continually tries to re-establish
+    a connection. A LOST_LINK occurs when STA cannot receive beacons within the
+    specified time for the SET_BMISS_TIME command.
+
+Event ID
+    0x1003
+
+Event Parameters
+    UINT8    disconnect
+        Reason
+        A WMI_DISCONNECT_REASON value
+
+    UINT8    bssid[6]
+        Indicates which BSS the device was connected to
+
+    UINT8    assocRespLen
+        Length of the 802.11 association response frame
+        that triggered this event, or 0 if not applicable
+
+    UINT8    assocInfo[assocRespLen]
+        Copy of the 802.11 association response frame
+
+Event Values
+    {
+        NO_NETWORK_AVAIL    =0x01
+            Indicates that the device was unable to
+            establish or find the desired network
+        LOST_LINK    =0x02
+            Indicates the devices is no longer receiving
+            beacons from the BSS it was previously
+            connected to
+
+        DISCONNECT_CMD  =0x03
+            Indicates a “DISCONNECT” command was
+            processed
+        BSS_DISCONNECTED =0x04
+            Indicates the BSS explicitly disconnected the
+            device. Possible mechanisms include the AP
+            sending 802.11 management frames
+            (e.g., disassociate or deauthentication
+            messages).
+        AUTH_FAILED    =0x05
+            Indicates that the device failed 802.11
+            authentication with the BSS
+        ASSOC_FAILED    =0x06
+            Indicates that the device failed 802.11
+            association with the BSS
+        NO_RESOURCES_AVAIL    =0x07
+            Indicates that a connection failed because the
+            AP had insufficient resources to complete the
+            connection
+        CSERV_DISCONNECT    =0x08
+            Indicates that the device’s connection services
+            module decided to disconnect from a BSS,
+            which can happen for a variety of reasons (e.g.,
+            the host marks the current connected AP as a
+            bad AP).
+        INVALID_PROFILE    =0x0A
+            Indicates that an attempt was made to
+            reconnect to a BSS that no longer matches the
+            current profile
+        All other values are reserved
+    } WMI_DISCONNECT_REASON
+
+
+=====================================================================
+
+
+Name
+    ERROR_REPORT
+
+Synopsis
+    Signals that a type of error has occurred for which the host previously requested
+    notification through the “TARGET_ERROR_REPORT_BITMASK” command.
+
+Event ID
+    0x100D
+
+Event Parameters
+    UINT32    errorVal
+            WMI_TARGET_ERROR_VAL value. See
+            “TARGET_ERROR_REPORT_BITMASK”.
+
+Event Values
+    errorVal
+    = 0x00000001
+    Power save fails
+
+        = 0x00000002
+    No cipher key
+
+        = 0x00000004
+    Decryption error
+
+        = 0x00000008
+    Beacon miss
+
+        = 0x00000010
+    A non-power save disabled node has joined
+    the PS-enabled network
+
+
+=====================================================================
+
+
+Name
+    EXTENSION
+
+Synopsis
+    The WMI is used mostly for wireless control messages to a wireless module that
+    apply to wireless module management regardless of the target platform
+    implementation. However, some events peripherally related to wireless management
+    are desired during operation. These wireless extension events may be platform-
+    specific or implementation-dependent. See “WMI Extension Commands”
+
+
+Event ID
+    0x1010
+
+
+=====================================================================
+
+
+Name
+    GET_PMKID_LIST_EVENT
+
+Synopsis
+    Generated by firmware in response to a “GET_PMKID_LIST_CMD” command.
+
+Event Parameters
+    typedef struct {
+        A_UINT32    numPMKID;
+            Contains the number of PMKIDs in the reply
+        WMI_PMKID   pmkidList[1];
+    } __ATTRIB_PACK WMI_PMKID_LIST_REPLY;
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+Name
+    GET_WOW_LIST_EVENT
+
+Synopsis
+    Response to the wmiconfig –getwowlist command to retrieve the configured Wake on
+    Wireless patterns
+
+Event ID
+    0x10018
+
+Event Parameters
+    {
+
+    A_UINT8    num_filters
+        Total number of patterns in the list
+    A_UINT8    this_filter_num
+        The filter number
+    A_UINT8    wow_mode
+        Shows whether WoW is enabled or disabled
+    A_UINT8    host_mode
+        Shows whether the host is asleep or awake
+    WOW_FILTER    wow_filters[1]
+        List of WoW filters (pattern and mask data bytes)
+    } WMI_GET_WOW_LIST_REPLY;
+
+    {
+        Each wow_filter_list element shows:
+    A_UINT8    wow_valid_filter
+        Whether the filter is valid
+    A_UINT8    wow_filter_list_id
+        Filter List ID (23 = default)
+    A_UINT8    wow_filter_size
+        Size in bytes of the filter
+    A_UINT8    wow_filter_offset
+        Offset of the pattern to search in the data packet
+    A_UINT8    wow_filter_mask[MASK_SIZE]
+        The mask to be applied to the pattern
+    A_UINT8    wow_filter_pattern[WOW_PATTERN_SIZE]
+        The pattern that to match to wake up the host
+    } WOW_FILTER
+
+Event Values
+    None
+
+=====================================================================
+
+
+
+Name
+    NEIGHBOR_REPORT
+
+Synopsis
+    Indicates the existence of neighbor APs that match the current profile. The host uses
+    this event to populate the PMKID cache on the AR6000 and/or to perform
+    preauthentication. This event is only generated in infrastructure mode.
+
+    A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP.
+
+Event ID
+    0x1008
+
+Event Parameters
+    UINT8    numberOfAps
+        The number of APs reported about in
+        this event
+    {
+        UINT8    bssid[6]
+            MAC address of a neighbor AP
+        UINT8    bssFlags
+            A WMI_BSS_FLAGS value
+    }[numberOfAps]
+
+
+Event Values
+    {
+        WMI_DEFAULT_BSS_FLAGS    = 0
+            Logical OR of 1 or more
+        WMI_BSS_FLAGS
+        WMI_PREAUTH_CAPABLE_BSS
+            = 1
+            Indicates that this AP is capable of
+            preauthentication
+        WMI_PMKID_VALID_BSS
+            = 2
+            Indicates that the AR6000 have a
+            valid pairwise master key for this AP
+    } WMI_BSS_FLAGS
+
+
+=====================================================================
+
+
+
+Name
+    OPT_RX_FRAME_EVENT
+
+Synopsis
+    Special feature, informs host of the reception of a special frame.
+
+Event ID
+    0x100E
+
+Event Parameters
+    {
+        A_UINT16    channel;
+        A_UINT8    frameType;
+        A_INT8    snr;
+        A_UINT8    srcAddr[ATH_MAC_LEN];
+        A_UINT8    bssid[ATH_MAC_LEN];
+        }WMI_OPT_RX_INFO_HDR
+
+Event Values
+    None
+
+=====================================================================
+
+
+
+Name
+    PSTREAM_TIMEOUT
+
+Synopsis
+    Indicates that a priority stream that got created as a result of priority-marked data
+    flow (priority marked in IP TOS) being idle for the default inactivity interval period
+    (specified in the “CREATE_PSTREAM” command) used for priority streams created
+    implicitly by the driver. This event is not indicated for user-created priority streams.
+    User-created priority streams exist until the users delete them explicitly. They do not
+    timeout due to data inactivity.
+
+Event ID
+    0x1007
+
+Event Parameters
+    A_UINT8
+    trafficClass
+    Indicated the traffic class of priority
+    stream that timed out
+
+Event Values
+    {
+        WMM_AC_BE    = 0
+            Best effort
+        WMM_AC_BK    = 1
+            Background
+        WMM_AC_VI    = 2
+            Video
+        WMM_AC_VO     = 3
+            Voice
+    } TRAFFIC CLASS
+
+
+=====================================================================
+
+Name
+    READY
+
+Synopsis
+    Indicates that the AR6000 device is prepared to accept commands. It is sent once after
+    power on or reset. It also indicates the MAC address of the device.
+
+Event ID
+    0x1001
+
+Event Parameters
+    UINT8    macAddr[6]
+        Device MAC address
+    UINT8    phyCapability
+        A WMI_PHY_CAPABILITY value. Indicates the
+        capabilities of the device wireless module’s radio
+
+Event Values
+    {
+        WMI_11A_CAPABILITY       = 1
+        WMI_11G_CAPABILITY       = 2
+        WMI_11AG_CAPABILITY      = 3
+    } WMI_PHY_CAPABILITY
+
+
+=====================================================================
+
+Name
+    REGDOMAIN
+
+Synopsis
+    Indicates that the regulatory domain has changed. It initially occurs when the
+    AR6000 device reads the board data information. The regulatory domain can also
+    change when the device is a world-mode SKU. In this case, the regulatory domain is
+    based on the country advertised by APs per the IEEE 802.11d specification. A
+    potential side effect of a regulatory domain change is a change in the list of available
+    channels. Any channel restrictions that exist as a result of a previous
+    “SET_CHANNEL_PARAMETERS” command are lifted.
+
+Event ID
+    0x1006
+
+Event Parameters
+    UINT32    regDomain
+        The range of 0x0000 – 0x00FF
+        corresponds to an ISO country code.
+
+    Other regCodes are reserved for world
+    mode settings and specific regulatory
+    domains.
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    REPORT_STATISTICS
+
+Synopsis
+    A reply to a “GET_TARGET_STATS” command.
+
+Event ID
+    0x100B
+
+Event Parameters
+    When the statistics are sent to the host, the AR6001 clear them so that a new set of
+    statistics are collected for the next report.
+
+    UINT32    tx_packets
+    UINT32    tx_bytes
+    UINT32    tx_unicast_pkts
+    UINT32    tx_unicast_bytes
+    UINT32    tx_multicast_pkts
+    UINT32    tx_multicast_bytes
+    UINT32    tx_broadcast_pkts
+    UINT32    tx_broadcast_bytes
+    UINT32    tx_rts_success_cnt
+    UINT32    tx_packet_per_ac[4]
+        Tx packets per AC: [0] = BE, [1] = BK,
+        [2] = VI, [3] = VO
+    UINT32    tx_errors
+        Number of packets which failed Tx, due
+        to all failures
+    ... REPORT_STATISTICS, continued
+    UINT32    tx_failed_cnt
+        Number of data packets that failed Tx
+    UINT32    tx_retry_cnt
+        Number of Tx retries for all packets
+    UINT32    tx_rts_fail_cnt
+        Number of RTS Tx failed count
+    UINT32    rx_packets
+    UINT32    rx_bytes
+    UINT32    rx_unicast_pkts
+    UINT32    rx_unicast_bytes
+    UINT32    rx_multicast_pkts
+    UINT32    rx_multicast_bytes
+    UINT32    rx_broadcast_pkts
+    UINT32    rx_broadcast_bytes
+    UINT32    rx_fragment_pkt
+        Number of fragmented packets received
+    UINT32    rx_errors
+        Number of Rx errors due to all failures
+    UINT32    rx_crcerr
+        Number of Rx errors due to CRC errors
+    UINT32    rx_key_cache_miss
+        Number of Rx errors due to a key not
+        being plumbed
+    UINT32    rx_decrypt_err
+        Number of Rx errors due to decryption
+        failure
+    UINT32    rx_duplicate_frames
+        Number of duplicate frames received
+    UINT32    tkip_local_mic_failure
+        Number of TKIP MIC errors detected
+    UINT32    tkip_counter_measures_invoked
+        Number of times TKIP countermeasures
+        were invoked
+    UINT32    tkip_replays
+        Number of frames that replayed a TKIP
+        encrypted frame received earlier
+    UINT32    tkip_format_errors
+        Number of frames that did not conform
+        to the TKIP frame format
+    UINT32    ccmp_format_errors
+        Number of frames that did not conform
+        to the CCMP frame format
+    UINT32    ccmp_replays
+        Number of frames that replayed a CCMP
+        encrypted frame received earlier
+    UINT32    power_save_failure_cnt
+        Number of failures that occurred when
+        the AR6001 could not go to sleep
+    UINT32    cs_bmiss_cnt
+        Number of BMISS interrupts since
+    connection
+    UINT32    cs_lowRssi_cnt
+        Number of the times the RSSI went below
+        the low RSSI threshold
+    UINT16    cs_connect_cnt
+        Number of connection times
+    UINT16    cs_disconnect_cnt
+        Number of disconnection times
+    UINT8    cs_aveBeacon_rssi
+        The current averaged value of the RSSI
+        from the beacons of the connected BSS
+    UINT8    cs_lastRoam_msec
+        Time that the last roaming took, in ms.
+        This time is the difference between
+        roaming start and actual connection.
+
+Event Values
+    None defined
+
+
+=====================================================================
+
+Name
+    ROAM_TBL_EVENT
+
+Synopsis
+    Reports the roam table, which contains the current roam mode and this information
+    for every BSS:
+
+Event ID
+    0x100F
+
+Event Parameters
+    A_UINT8     bssid[ATH_MAC_LEN];
+        BSSID
+    A_UINT8     rssi
+        Averaged RSSI
+    A_UINT8     rssidt
+        Change in RSSI
+    A_UINT8     last_rssi
+        Last recorded RSSI
+    A_UINT8     roam_util
+        Utility value used in roaming decision
+    A_UINT8     util
+        Base utility with the BSS
+    A_UINT8     bias
+        Host configured for this BSS
+
+Event Values
+    roamMode
+        Current roam mode
+
+        = 1
+    RSSI based roam
+
+        = 2
+    Host bias-based roam
+
+        = 3
+    Lock to the current BSS
+
+        = 4
+    Autonomous roaming disabled
+
+
+=====================================================================
+
+Name
+    RSSI_THRESHOLD
+
+Synopsis
+    Alerts the host that the signal strength from the connected AP has crossed a
+    interesting threshold as defined in a previous “RSSI_THRESHOLD_PARAMS”
+    command.
+
+Event ID
+    0x100C
+
+Event Parameters
+    UINT8    range
+        A WMI_RSSI_THRESHOLD_VAL
+        value, which indicates the range of
+        the average signal strength
+
+Event Values
+    {
+        WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL  = 1
+        WMI_RSSI_LOWTHRESHOLD_LOWERVAL        = 2
+        WMI_RSSI_LOWTHRESHOLD_UPPERVAL        = 3
+        WMI_RSSI_HIGHTHRESHOLD_LOWERVAL       = 4
+        WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL      = 5
+    } WMI_RSSI_THRESHOLD_VAL
+
+
+=====================================================================
+
+Name
+    SCAN_COMPLETE_EVENT
+
+Synopsis
+    Indicates the scan status. if the Scan was not completed, this event is generated with
+    the status A_ECANCELED.
+
+Event ID
+    0x100A
+
+Event Parameters
+    A_UINT8    scanStatus
+
+Event Values
+    {
+        #define     SCAN_ABORTED 16
+        #define     SCAN_COMPLETED 0
+        A_UINT8     scanStatus
+            A_OK or A_ECANCELED
+    } WMI_SCAN_COMPLETE_EVENT;
+
+
+=====================================================================
+
+Name
+    TEST_EVENT
+
+Synopsis
+    The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to
+    communicate events from target to host. The events are parsed by the TCMD
+    application and WMI layer is oblivious of it.
+
+Event ID
+    0x1016
+
+Event Parameters
+    WMI_TEST_EVENTID
+
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    TKIP_MICERR
+
+Synopsis
+    Indicates that TKIP MIC errors were detected.
+
+Event ID
+    0x1009
+
+Event Parameters
+    UINT8    keyid
+        Indicates the TKIP key ID
+
+    UINT8    ismcast
+        0 = Unicast
+        1 = Multicast
+
+Event Values
+    See event parameters
+
+=====================================================================
+
+WMI Extension Commands
+
+The WMI EXTENSION command is used to multiplex a collection of
+commands that:
+
+        Are not generic wireless commands
+        May be implementation-specific
+        May be target platform-specific
+        May be optional for a host implementation
+
+    An extension command is sent to the AR6000 targets like any other WMI
+command message and uses the WMI_EXTENSION. The first field of the
+payload for this EXTENSION command is another commandId, sometimes
+called the subcommandId, which indicates which extension command is
+being used. A subcommandId-specific payload follows the subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also “WMI Extension Events” on page B-58.
+
+
+WMI Extension Commands
+
+
+GPIO_INPUT_GET
+    Read GPIO pins configured for input
+
+GPIO_INTR_ACK
+    Acknowledge and re-arm GPIO interrupts reported earlier
+
+GPIO_OUTPUT_SET
+    Manage output on GPIO pins configured for output
+
+GPIO_REGISTER_GET
+    Read an arbitrary GPIO register
+
+GPIO_REGISTER_SET
+    Dynamically change GPIO configuration
+
+SET_LQTHRESHOLD
+    Set link quality thresholds; the sampling happens at every unicast
+    data frame Tx, if certain thresholds are met, and corresponding
+    events are sent to the host
+
+
+=====================================================================
+
+Name
+    GPIO_INPUT_GET
+
+Synopsis
+    Allows the host to read GPIO pins that are configured for input. The values read are
+    returned through a “GPIO_DATA” extension event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    None
+
+
+
+Reply Parameters
+    None
+
+
+Reset Value
+    None
+
+
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    GPIO_INTR_ACK
+
+Synopsis
+    The host uses this command to acknowledge and to re-arm GPIO interrupts reported
+    through an earlier “GPIO_INTR” extension event. A single “GPIO_INTR_ACK”
+    command should be used to acknowledge all GPIO interrupts that the host knows to
+    be outstanding (if pending interrupts are not acknowledged through
+    “GPIO_INTR_ACK”, another “GPIO_INTR” extension event is raised).
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    ack_mask
+        A mask of interrupting GPIO pins (e.g., ack_mask
+        bit [3] acknowledges an interrupt from the pin GPIO3).
+
+Command Values
+    None
+
+Reset Value
+    None
+
+Restrictions
+    The host should acknowledge only interrupts about which it was notified.
+
+
+=====================================================================
+
+Name
+    GPIO_OUTPUT_SET
+
+Synopsis
+    Manages output on GPIO pins configured for output.
+
+    Conflicts between set_mask and clear_mask or enable_mask and disable_mask result
+    in undefined behavior.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    set_mask
+        Specifies which pins should drive a 1 out
+    UINT32    clear_mask
+        Specifies which pins should drive a 0 out
+    UINT32    enable_mask
+        Specifies which pins should be enabled for output
+    UINT32    disable_mask
+        Specifies which pins should be disabled for output
+
+Command Values
+    None
+
+
+Reset Value
+    None
+
+
+Restrictions
+    None
+
+
+
+=====================================================================
+
+
+Name
+    GPIO_REGISTER_GET
+
+Synopsis
+    Allows the host to read an arbitrary GPIO register. It is intended for use during
+    bringup/debug. The target responds to this command with a “GPIO_DATA” event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32
+    gpioreg_id
+    Specifies a GPIO register identifier, as defined
+in include/AR6000/AR6000_gpio.h
+
+Reply Parameters
+    None
+
+Reset Value
+    N/A
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    GPIO_REGISTER_SET
+
+Synopsis
+    Allows the host to dynamically change GPIO configuration (usually handled
+    statically through the GPIO configuration DataSet).
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    gpioreg_id
+        Specifies a GPIO register identifier, as defined in
+        include/AR6000/AR6000_gpio.h
+    UINT32    value
+        Specifies a value to write to the specified
+        GPIO register
+
+Command Values
+    None
+
+
+Reset Value
+    Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM
+    Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This
+    configuration is modified by the GPIO Configuration DataSet, if one exists.
+
+Restrictions
+    None
+
+
+=====================================================================
+
+
+Name
+    SET_LQTHRESHOLD
+
+Synopsis
+    Set link quality thresholds, the sampling happens at every unicast data frame Tx, if
+    certain threshold is met, corresponding event will be sent to host.
+
+Command
+    wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>...
+    <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4>
+
+Command Parameters
+    A_UINT8   enable;
+    A_UINT8   thresholdAbove1_Val;
+    A_UINT8   thresholdAbove2_Val;
+    A_UINT8   thresholdAbove3_Val;
+    A_UINT8   thresholdAbove4_Val;
+    A_UINT8   thresholdBelow1_Val;
+    A_UINT8   thresholdBelow2_Val;
+    A_UINT8   thresholdBelow3_Val;
+    A_UINT8   thresholdBelow4_Val;
+
+Command Values
+    enable
+    = 0
+    Disable link quality sampling
+
+        = 1
+    Enable link quality sampling
+
+
+    thresholdAbove_Val
+    [1...4]
+    Above thresholds (value in [0,100]), in ascending
+    order threshold
+
+    Below_Val [1...4] = below thresholds (value
+    in [0,100]), in ascending order
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+=====================================================================
+WMI Extension Events
+
+The WMI EXTENSION event is used for a collection of events that:
+
+    Are not generic wireless events
+    May be implementation-specific
+    May be target platform-specific
+    May be optional for a host implementation
+
+    An extension event is sent from the AR6000 device targets to the host just like
+any other WMI event message, using the WMI_EXTENSION_EVENTID. The
+first field of the payload for this “EXTENSION” event is another commandId
+(sometimes called the subcommandId) that indicates which “EXTENSION”
+event is being used. A subcommandId-specific payload follows the
+subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also “WMI Extension Commands” on page B-55.
+
+
+WMI Extension Events
+
+
+GPIO_ACK
+    Acknowledges a host set command has been processed by the device
+
+GPIO_DATA
+    Response to a host’s request for data
+
+GPIO_INTR
+    Signals that GPIO interrupts are pending
+
+
+=====================================================================
+
+Name
+    GPIO_ACK
+
+Synopsis
+    Acknowledges that a host set command (either “GPIO_OUTPUT_SET” or
+    “GPIO_REGISTER_SET”) has been processed by the AR6000 device.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    None
+
+
+Event Values
+    None
+
+=====================================================================
+
+
+Name
+    GPIO_DATA
+
+Synopsis
+    The AR6000 device uses this event to respond to the host’s earlier request for data
+    (through either a “GPIO_REGISTER_GET” or a “GPIO_INPUT_GET” command).
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    UINT32    value
+        Holds the data of interest, which is either a register value
+        (in the case of “GPIO_REGISTER_GET”) or a mask of
+        pin inputs (in the case of “GPIO_INPUT_GET”).
+    UINT32    reg_id
+        Indicates which register was read (in the case of
+        “GPIO_REGISTER_GET”) or is GPIO_ID_NONE (in the
+        case of “GPIO_INPUT_GET”)
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    GPIO_INTR
+
+Synopsis
+    The AR6000 device raises this event to signal that GPIO interrupts are pending.
+    These GPIOs may be interrupts that occurred after the last “GPIO_INTR_ACK”
+    command was issued, or may be GPIO interrupts that the host failed to acknowledge
+    in the last “GPIO_INTR_ACK”. The AR6000 will not raise another GPIO_INTR
+    event until this event is acknowledged through a “GPIO_INTR_ACK” command.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    UINT32    intr_mask
+        Indicates which GPIO interrupts are currently pending
+
+    UINT32    input_values
+        A recent copy of the GPIO input values, taken at the
+        time the most recent GPIO interrupt was processed
+
+Event Values
+    None
+
+
+
+=====================================================================
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_host.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_host.h
new file mode 100644
index 0000000..57844bc
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/wmi_host.h
@@ -0,0 +1,71 @@
+#ifndef _WMI_HOST_H_
+#define _WMI_HOST_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains local definitios for the wmi host module.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct wmi_stats {
+    A_UINT32    cmd_len_err;
+    A_UINT32    cmd_id_err;
+};
+
+struct wmi_t {
+    A_BOOL                          wmi_ready;
+    A_BOOL                          wmi_numQoSStream;
+    A_UINT8                         wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT];
+    WMI_PRI_STREAM_ID               wmi_ac2WmiStreamMapping[WMM_NUM_AC];
+    A_UINT16                        wmi_streamExistsForAC[WMM_NUM_AC];
+    A_UINT8                         wmi_fatPipeExists;
+    void                           *wmi_devt;
+    struct wmi_stats                wmi_stats;
+    struct ieee80211_node_table     wmi_scan_table;
+    A_UINT8                         wmi_bssid[ATH_MAC_LEN];
+    A_UINT8                         wmi_powerMode;
+    A_UINT8                         wmi_phyMode;
+    A_UINT8                         wmi_keepaliveInterval;
+    A_MUTEX_T                       wmi_lock;
+};
+
+#define WMI_INIT_WMISTREAM_AC_MAP(w) \
+{  (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \
+   (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \
+   (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \
+   (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; }
+
+#define WMI_WMISTREAM_ACCESSCATEGORY(w,s)      (w)->wmi_wmiStream2AcMapping[s]
+#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac)       (w)->wmi_ac2WmiStreamMapping[ac]
+
+#define LOCK_WMI(w)     A_MUTEX_LOCK(&(w)->wmi_lock);
+#define UNLOCK_WMI(w)   A_MUTEX_UNLOCK(&(w)->wmi_lock);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_HOST_H_ */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c
new file mode 100644
index 0000000..0814d10
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c
@@ -0,0 +1,442 @@
+/*
+ * Keyboard driver for Openmoko Freerunner GSM phone
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * inspired by corkgbd.c by Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#ifdef CONFIG_PM
+extern int global_inside_suspend;
+#else
+#define global_inside_suspend 0
+#endif
+
+struct gta02kbd {
+	struct platform_device *pdev;
+	struct input_dev *input;
+	struct device *cdev;
+	struct work_struct work;
+	int aux_state;
+	int work_in_progress;
+	int hp_irq_count_in_work;
+	int hp_irq_count;
+	int jack_irq;
+};
+
+static struct class *gta02kbd_switch_class;
+
+enum keys {
+	GTA02_KEY_AUX,
+	GTA02_KEY_HOLD,
+	GTA02_KEY_JACK,
+};
+
+struct gta02kbd_key {
+	const char * name;
+	irqreturn_t (*isr)(int irq, void *dev_id);
+	int irq;
+	int input_key;
+};
+
+static irqreturn_t gta02kbd_aux_irq(int irq, void *dev_id);
+static irqreturn_t gta02kbd_headphone_irq(int irq, void *dev_id);
+static irqreturn_t gta02kbd_default_key_irq(int irq, void *dev_id);
+
+
+static struct gta02kbd_key keys[] = {
+	[GTA02_KEY_AUX] = {
+		.name = "GTA02 AUX button",
+		.isr = gta02kbd_aux_irq,
+		.input_key = KEY_PHONE,
+	},
+	[GTA02_KEY_HOLD] = {
+		.name = "GTA02 HOLD button",
+		.isr = gta02kbd_default_key_irq,
+		.input_key = KEY_PAUSE,
+	},
+	[GTA02_KEY_JACK] = {
+		.name = "GTA02 Headphone jack",
+		.isr = gta02kbd_headphone_irq,
+	},
+};
+
+/* This timer section filters AUX button IRQ bouncing */
+
+static void aux_key_timer_f(unsigned long data);
+
+static struct timer_list aux_key_timer =
+		TIMER_INITIALIZER(aux_key_timer_f, 0, 0);
+
+#define AUX_TIMER_TIMEOUT (HZ >> 7)
+#define AUX_TIMER_ALLOWED_NOOP 2
+#define AUX_TIMER_CONSECUTIVE_EVENTS 5
+
+struct gta02kbd *timer_kbd;
+
+static void aux_key_timer_f(unsigned long data)
+{
+	static int noop_counter;
+	static int last_key = -1;
+	static int last_count;
+	int key_pressed;
+
+	key_pressed =
+		gpio_get_value(timer_kbd->pdev->resource[GTA02_KEY_AUX].start);
+
+	if (likely(key_pressed == last_key))
+		last_count++;
+	else {
+		last_count = 1;
+		last_key = key_pressed;
+	}
+
+	if (unlikely(last_count >= AUX_TIMER_CONSECUTIVE_EVENTS)) {
+		if (timer_kbd->aux_state != last_key) {
+			input_report_key(timer_kbd->input, KEY_PHONE, last_key);
+			input_sync(timer_kbd->input);
+
+			timer_kbd->aux_state = last_key;
+			noop_counter = 0;
+		}
+		last_count = 0;
+		if (unlikely(++noop_counter > AUX_TIMER_ALLOWED_NOOP)) {
+			noop_counter = 0;
+			return;
+		}
+	}
+
+	mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
+}
+
+static irqreturn_t gta02kbd_aux_irq(int irq, void *dev)
+{
+	mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gta02kbd_default_key_irq(int irq, void *dev_id)
+{
+	struct gta02kbd *kbd = dev_id;
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(keys); n++) {
+
+		if (irq != keys[n].irq)
+			continue;
+
+		input_report_key(kbd->input, keys[n].input_key,
+				  gpio_get_value(kbd->pdev->resource[n].start));
+		input_sync(kbd->input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static const char *event_array_jack[2][4] = {
+	[0] = {
+		"SWITCH_NAME=headset",
+		"SWITCH_STATE=0",
+		"EVENT=remove",
+		NULL
+	},
+	[1] = {
+		"SWITCH_NAME=headset",
+		"SWITCH_STATE=1",
+		"EVENT=insert",
+		NULL
+	},
+};
+
+static void gta02kbd_jack_event(struct device *dev, int num)
+{
+	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, (char **)event_array_jack[!!num]);
+}
+
+
+static void gta02kbd_debounce_jack(struct work_struct *work)
+{
+	struct gta02kbd *kbd = container_of(work, struct gta02kbd, work);
+	unsigned long flags;
+	int loop = 0;
+	int level;
+
+	do {
+		/*
+		 * we wait out any multiple interrupt
+		 * stuttering in 100ms lumps
+		 */
+		do {
+			kbd->hp_irq_count_in_work = kbd->hp_irq_count;
+			msleep(100);
+		} while (kbd->hp_irq_count != kbd->hp_irq_count_in_work);
+		/*
+		 * no new interrupts on jack for 100ms...
+		 * ok we will report it
+		 */
+		level = gpio_get_value(kbd->pdev->resource[GTA02_KEY_JACK].start);
+		input_report_switch(kbd->input, SW_HEADPHONE_INSERT, level);
+		input_sync(kbd->input);
+		gta02kbd_jack_event(kbd->cdev, level);
+		/*
+		 * we go around the outer loop again if we detect that more
+		 * interrupts came while we are servicing here.  But we have
+		 * to sequence it carefully with interrupts off
+		 */
+		local_save_flags(flags);
+		/* no interrupts during this work means we can exit the work */
+		loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work);
+		if (!loop)
+			kbd->work_in_progress = 0;
+		local_irq_restore(flags);
+		/*
+		 * interrupt that comes here will either queue a new work action
+		 * since work_in_progress is cleared now, or be dealt with
+		 * when we loop.
+		 */
+	} while (loop);
+}
+
+
+static irqreturn_t gta02kbd_headphone_irq(int irq, void *dev_id)
+{
+	struct gta02kbd *gta02kbd_data = dev_id;
+
+	/*
+	 * this interrupt is prone to bouncing and userspace doesn't like
+	 * to have to deal with that kind of thing.  So we do not accept
+	 * that a jack interrupt is equal to a jack event.  Instead we fire
+	 * some work on the first interrupt, and it hangs about in 100ms units
+	 * until no more interrupts come.  Then it accepts the state it finds
+	 * for jack insert and reports it once
+	 */
+
+	gta02kbd_data->hp_irq_count++;
+	/*
+	 * the first interrupt we see for a while, we fire the work item
+	 * and record the interrupt count when we did that.  If more interrupts
+	 * come in the meanwhile, we can tell by the difference in that
+	 * stored count and hp_irq_count which increments every interrupt
+	 */
+	if (!gta02kbd_data->work_in_progress) {
+		gta02kbd_data->jack_irq = irq;
+		gta02kbd_data->hp_irq_count_in_work =
+						gta02kbd_data->hp_irq_count;
+		if (!schedule_work(&gta02kbd_data->work))
+			printk(KERN_ERR
+				"Unable to schedule headphone debounce\n");
+		else
+			gta02kbd_data->work_in_progress = 1;
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+static int gta02kbd_suspend(struct platform_device *dev, pm_message_t state)
+{
+	disable_irq(keys[GTA02_KEY_AUX].irq);
+	del_timer_sync(&aux_key_timer);
+	return 0;
+}
+
+static int gta02kbd_resume(struct platform_device *dev)
+{
+	enable_irq(keys[GTA02_KEY_AUX].irq);
+	return 0;
+}
+#else
+#define gta02kbd_suspend	NULL
+#define gta02kbd_resume	NULL
+#endif
+
+static ssize_t gta02kbd_switch_name_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", "gta02 Headset Jack");
+}
+
+static ssize_t gta02kbd_switch_state_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct gta02kbd *kbd = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		   gpio_get_value(kbd->pdev->resource[GTA02_KEY_JACK].start));
+}
+
+static DEVICE_ATTR(name, S_IRUGO , gta02kbd_switch_name_show, NULL);
+static DEVICE_ATTR(state, S_IRUGO , gta02kbd_switch_state_show, NULL);
+
+static int gta02kbd_probe(struct platform_device *pdev)
+{
+	struct gta02kbd *gta02kbd;
+	struct input_dev *input_dev;
+	int rc;
+	int irq;
+	int n;
+
+	gta02kbd = kzalloc(sizeof(struct gta02kbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!gta02kbd || !input_dev) {
+		kfree(gta02kbd);
+		input_free_device(input_dev);
+		return -ENOMEM;
+	}
+
+	gta02kbd->pdev = pdev;
+	timer_kbd = gta02kbd;
+
+	if (pdev->resource[0].flags != 0)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, gta02kbd);
+
+	gta02kbd->input = input_dev;
+
+	INIT_WORK(&gta02kbd->work, gta02kbd_debounce_jack);
+
+	input_dev->name = "GTA02 Buttons";
+	input_dev->phys = "gta02kbd/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
+	set_bit(KEY_PHONE, input_dev->keybit);
+	set_bit(KEY_PAUSE, input_dev->keybit);
+
+	rc = input_register_device(gta02kbd->input);
+	if (rc)
+		goto out_register;
+
+	gta02kbd->cdev = device_create(gta02kbd_switch_class,
+					  &pdev->dev, 0, gta02kbd, "headset");
+	if (unlikely(IS_ERR(gta02kbd->cdev))) {
+		rc = PTR_ERR(gta02kbd->cdev);
+		goto out_device_create;
+	}
+
+	rc = device_create_file(gta02kbd->cdev, &dev_attr_name);
+	if(rc)
+		goto out_device_create_file;
+
+	rc = device_create_file(gta02kbd->cdev, &dev_attr_state);
+	if(rc)
+		goto out_device_create_file;
+
+	/* register GPIO IRQs */
+	for(n = 0; n < min(pdev->num_resources, ARRAY_SIZE(keys)); n++) {
+
+		if (!pdev->resource[0].start)
+			continue;
+
+		irq = gpio_to_irq(pdev->resource[n].start);
+		if (irq < 0)
+			continue;
+
+		if (request_irq(irq, keys[n].isr, IRQF_DISABLED |
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				keys[n].name, gta02kbd)) {
+			dev_err(&pdev->dev, "Can't get IRQ %u\n", irq);
+
+			/* unwind any irq registrations and fail */
+
+			while (n > 0) {
+				n--;
+				free_irq(gpio_to_irq(pdev->resource[n].start),
+								    gta02kbd);
+			}
+			goto out_device_create_file;
+		}
+
+		keys[n].irq = irq;
+	}
+
+	enable_irq_wake(keys[GTA02_KEY_JACK].irq);
+
+	return 0;
+
+out_device_create_file:
+	device_unregister(gta02kbd->cdev);
+out_device_create:
+	input_unregister_device(gta02kbd->input);
+out_register:
+	input_free_device(gta02kbd->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gta02kbd);
+
+	return -ENODEV;
+}
+
+static int gta02kbd_remove(struct platform_device *pdev)
+{
+	struct gta02kbd *gta02kbd = platform_get_drvdata(pdev);
+
+	free_irq(gpio_to_irq(pdev->resource[2].start), gta02kbd);
+	free_irq(gpio_to_irq(pdev->resource[1].start), gta02kbd);
+	free_irq(gpio_to_irq(pdev->resource[0].start), gta02kbd);
+
+	device_unregister(gta02kbd->cdev);
+	input_unregister_device(gta02kbd->input);
+	input_free_device(gta02kbd->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gta02kbd);
+
+	return 0;
+}
+
+static struct platform_driver gta02kbd_driver = {
+	.probe		= gta02kbd_probe,
+	.remove		= gta02kbd_remove,
+	.suspend	= gta02kbd_suspend,
+	.resume		= gta02kbd_resume,
+	.driver		= {
+		.name	= "gta02-button",
+	},
+};
+
+static int __devinit gta02kbd_init(void)
+{
+	gta02kbd_switch_class = class_create(THIS_MODULE, "switch");
+	if (IS_ERR(gta02kbd_switch_class))
+		return PTR_ERR(gta02kbd_switch_class);
+	return platform_driver_register(&gta02kbd_driver);
+}
+
+static void __exit gta02kbd_exit(void)
+{
+	platform_driver_unregister(&gta02kbd_driver);
+	class_destroy(gta02kbd_switch_class);
+}
+
+module_init(gta02kbd_init);
+module_exit(gta02kbd_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner buttons input driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c
new file mode 100644
index 0000000..dc6602a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c
@@ -0,0 +1,957 @@
+/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
+ *
+ * Copyright (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *         converted to private bitbang by:
+ *         Andy Green <andy@openmoko.com>
+ *         ability to set acceleration threshold added by:
+ *         Simon Kagstrom <simon.kagstrom@gmail.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * TODO
+ * 	* statistics for overflow events
+ * 	* configuration interface (sysfs) for
+ * 		* enable/disable x/y/z axis data ready
+ * 		* enable/disable resume from freee fall / click
+ * 		* free fall / click parameters
+ * 		* high pass filter parameters
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/lis302dl.h>
+
+/* Utility functions */
+static u8 __reg_read(struct lis302dl_info *lis, u8 reg)
+{
+	struct spi_message msg;
+	struct spi_transfer t;
+	u8 data[2] = {0xc0 | reg};
+	int rc;
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = 2;
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* Should complete without blocking */
+	rc = spi_non_blocking_transfer(lis->spi, &msg);
+	if (rc < 0) {
+		dev_err(lis->dev, "Error reading register\n");
+		return rc;
+	}
+
+	return data[1];
+}
+
+static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val)
+{
+	struct spi_message msg;
+	struct spi_transfer t;
+	u8 data[2] = {reg, val};
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = 2;
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* Completes without blocking */
+	if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
+		dev_err(lis->dev, "Error writing register\n");
+}
+
+static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
+		u8 val)
+{
+	u_int8_t tmp;
+
+	val &= mask;
+
+	tmp = __reg_read(lis, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	__reg_write(lis, reg, tmp);
+}
+
+static int __ms_to_duration(struct lis302dl_info *lis, int ms)
+{
+	/* If we have 400 ms sampling rate, the stepping is 2.5 ms,
+	 * on 100 ms the stepping is 10ms */
+	if (lis->flags & LIS302DL_F_DR)
+		return min((ms * 10) / 25, 637);
+
+	return min(ms / 10, 2550);
+}
+
+static int __duration_to_ms(struct lis302dl_info *lis, int duration)
+{
+	if (lis->flags & LIS302DL_F_DR)
+		return (duration * 25) / 10;
+
+	return duration * 10;
+}
+
+static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg)
+{
+	/* If FS is set each bit is 71mg, otherwise 18mg. The THS register
+	 * has 7 bits for the threshold value */
+	if (lis->flags & LIS302DL_F_FS)
+		return min(mg / 71, 127);
+
+	return min(mg / 18, 127);
+}
+
+static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold)
+{
+	if (lis->flags & LIS302DL_F_FS)
+		return threshold * 71;
+
+	return threshold * 18;
+}
+
+/* interrupt handling related */
+
+enum lis302dl_intmode {
+	LIS302DL_INTMODE_GND		= 0x00,
+	LIS302DL_INTMODE_FF_WU_1	= 0x01,
+	LIS302DL_INTMODE_FF_WU_2	= 0x02,
+	LIS302DL_INTMODE_FF_WU_12	= 0x03,
+	LIS302DL_INTMODE_DATA_READY	= 0x04,
+	LIS302DL_INTMODE_CLICK		= 0x07,
+};
+
+static void __lis302dl_int_mode(struct device *dev, int int_pin,
+			      enum lis302dl_intmode mode)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	switch (int_pin) {
+	case 1:
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
+		break;
+	case 2:
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void __enable_wakeup(struct lis302dl_info *lis)
+{
+	__reg_write(lis, LIS302DL_REG_CTRL1, 0);
+
+	/* First zero to get to a known state */
+	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
+			LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
+			LIS302DL_FFWUCFG_LIR);
+	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+			__mg_to_threshold(lis, lis->wakeup.threshold));
+	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+			__ms_to_duration(lis, lis->wakeup.duration));
+
+	/* Route the interrupt for wakeup */
+	__lis302dl_int_mode(lis->dev, 1,
+			LIS302DL_INTMODE_FF_WU_1);
+
+	__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+	__reg_read(lis, LIS302DL_REG_OUT_X);
+	__reg_read(lis, LIS302DL_REG_OUT_Y);
+	__reg_read(lis, LIS302DL_REG_OUT_Z);
+	__reg_read(lis, LIS302DL_REG_STATUS);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
+}
+
+static void __enable_data_collection(struct lis302dl_info *lis)
+{
+	u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
+			 LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
+
+	/* make sure we're powered up and generate data ready */
+	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
+
+	/* If the threshold is zero, let the device generated an interrupt
+	 * on each datum */
+	if (lis->threshold == 0) {
+		__reg_write(lis, LIS302DL_REG_CTRL2, 0);
+		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
+		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
+	} else {
+		__reg_write(lis, LIS302DL_REG_CTRL2,
+				LIS302DL_CTRL2_HPFF1);
+		__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+				__mg_to_threshold(lis, lis->threshold));
+		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+				__ms_to_duration(lis, lis->duration));
+
+		/* Clear the HP filter "starting point" */
+		__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+		__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
+				LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
+				LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
+		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
+		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
+	}
+}
+
+#if 0
+static void _report_btn_single(struct input_dev *inp, int btn)
+{
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+}
+
+static void _report_btn_double(struct input_dev *inp, int btn)
+{
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+	input_sync(inp);
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+}
+#endif
+
+
+static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
+{
+	u8 data[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 2] = {0xC0 | LIS302DL_REG_STATUS};
+	u8 *read = data + 1;
+	unsigned long flags;
+	int mg_per_sample = __threshold_to_mg(lis, 1);
+	struct spi_message msg;
+	struct spi_transfer t;
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = sizeof(data);
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* grab the set of register containing status and XYZ data */
+
+	local_irq_save(flags);
+
+	/* Should complete without blocking */
+	if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
+		dev_err(lis->dev, "Error reading registers\n");
+
+	local_irq_restore(flags);
+
+	/*
+	 * at the minute the test below fails 50% of the time due to
+	 * a problem with level interrupts causing ISRs to get called twice.
+	 * This is a workaround for that, but actually this test is still
+	 * valid and the information can be used for overrrun stats.
+	 */
+
+	/* has any kind of overrun been observed by the lis302dl? */
+	if (read[0] & (LIS302DL_STATUS_XOR |
+		       LIS302DL_STATUS_YOR |
+		       LIS302DL_STATUS_ZOR))
+		lis->overruns++;
+
+	/* we have a valid sample set? */
+	if (read[0] & LIS302DL_STATUS_XYZDA) {
+		input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
+		input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
+		input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
+
+		input_sync(lis->input_dev);
+	}
+
+	if (lis->threshold)
+		/* acknowledge the wakeup source */
+		__reg_read(lis,	LIS302DL_REG_FF_WU_SRC_1);
+}
+
+static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
+{
+	struct lis302dl_info *lis = _lis;
+
+	lis302dl_bitbang_read_sample(lis);
+	return IRQ_HANDLED;
+}
+
+/* sysfs */
+
+static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", lis->overruns);
+}
+
+static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
+
+static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	u8 ctrl1;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
+	local_irq_restore(flags);
+
+	return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
+}
+
+static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (!strcmp(buf, "400\n")) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+				 LIS302DL_CTRL1_DR);
+		lis->flags |= LIS302DL_F_DR;
+	} else {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+				0);
+		lis->flags &= ~LIS302DL_F_DR;
+	}
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
+
+static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	u_int8_t ctrl1;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
+	local_irq_restore(flags);
+
+	return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
+}
+
+static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (!strcmp(buf, "9.2\n")) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+				 LIS302DL_CTRL1_FS);
+		lis->flags |= LIS302DL_F_FS;
+	} else {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+				0);
+		lis->flags &= ~LIS302DL_F_FS;
+	}
+
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__enable_data_collection(lis);
+
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
+
+static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	/* Display the device view of the threshold setting */
+	return sprintf(buf, "%d\n", __threshold_to_mg(lis,
+			__mg_to_threshold(lis, lis->threshold)));
+}
+
+static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int val;
+
+	if (sscanf(buf, "%u\n", &val) != 1)
+		return -EINVAL;
+	/* 8g is the maximum if FS is 1 */
+	if (val > 8000)
+		return -ERANGE;
+
+	/* Set the threshold and write it out if the device is used */
+	lis->threshold = val;
+
+	if (lis->flags & LIS302DL_F_INPUT_OPEN) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		__enable_data_collection(lis);
+		local_irq_restore(flags);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
+
+static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", __duration_to_ms(lis,
+			__ms_to_duration(lis, lis->duration)));
+}
+
+static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int val;
+
+	if (sscanf(buf, "%u\n", &val) != 1)
+		return -EINVAL;
+	if (val > 2550)
+		return -ERANGE;
+
+	lis->duration = val;
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+				__ms_to_duration(lis, lis->duration));
+
+	return count;
+}
+
+static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
+
+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
+								      char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	int n = 0;
+	u8 reg[0x40];
+	char *end = buf;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for (n = 0; n < sizeof(reg); n++)
+		reg[n] = __reg_read(lis, n);
+
+	local_irq_restore(flags);
+
+	for (n = 0; n < sizeof(reg); n += 16) {
+		hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end++ = '\0';
+	}
+
+	return end - buf;
+}
+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
+
+/* Configure freefall/wakeup interrupts */
+static ssize_t set_wakeup_threshold(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int threshold;
+
+	if (sscanf(buf, "%u\n", &threshold) != 1)
+		return -EINVAL;
+
+	if (threshold > 8000)
+		return -ERANGE;
+
+	/* Zero turns the feature off */
+	if (threshold == 0) {
+		if (lis->flags & LIS302DL_F_IRQ_WAKE) {
+			disable_irq_wake(lis->pdata->interrupt);
+			lis->flags &= ~LIS302DL_F_IRQ_WAKE;
+		}
+
+		return count;
+	}
+
+	lis->wakeup.threshold = threshold;
+
+	if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
+		enable_irq_wake(lis->pdata->interrupt);
+		lis->flags |= LIS302DL_F_IRQ_WAKE;
+	}
+
+	return count;
+}
+
+static ssize_t show_wakeup_threshold(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	/* All events off? */
+	if (lis->wakeup.threshold == 0)
+		return sprintf(buf, "off\n");
+
+	return sprintf(buf, "%u\n", lis->wakeup.threshold);
+}
+
+static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
+		set_wakeup_threshold);
+
+static ssize_t set_wakeup_duration(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int duration;
+
+	if (sscanf(buf, "%u\n", &duration) != 1)
+		return -EINVAL;
+
+	if (duration > 2550)
+		return -ERANGE;
+
+	lis->wakeup.duration = duration;
+
+	return count;
+}
+
+static ssize_t show_wakeup_duration(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", lis->wakeup.duration);
+}
+
+static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
+		set_wakeup_duration);
+
+static struct attribute *lis302dl_sysfs_entries[] = {
+	&dev_attr_sample_rate.attr,
+	&dev_attr_full_scale.attr,
+	&dev_attr_threshold.attr,
+	&dev_attr_duration.attr,
+	&dev_attr_dump.attr,
+	&dev_attr_wakeup_threshold.attr,
+	&dev_attr_wakeup_duration.attr,
+	&dev_attr_overruns.attr,
+	NULL
+};
+
+static struct attribute_group lis302dl_attr_group = {
+	.name	= NULL,
+	.attrs	= lis302dl_sysfs_entries,
+};
+
+/* input device handling and driver core interaction */
+
+static int lis302dl_input_open(struct input_dev *inp)
+{
+	struct lis302dl_info *lis = input_get_drvdata(inp);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	__enable_data_collection(lis);
+	lis->flags |= LIS302DL_F_INPUT_OPEN;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void lis302dl_input_close(struct input_dev *inp)
+{
+	struct lis302dl_info *lis = input_get_drvdata(inp);
+	u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
+			 LIS302DL_CTRL1_Zen;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* since the input core already serializes access and makes sure we
+	 * only see close() for the close of the last user, we can safely
+	 * disable the data ready events */
+	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
+	lis->flags &= ~LIS302DL_F_INPUT_OPEN;
+
+	/* however, don't power down the whole device if still needed */
+	if (!(lis->flags & LIS302DL_F_WUP_FF ||
+	      lis->flags & LIS302DL_F_WUP_CLICK)) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
+				 0x00);
+	}
+	local_irq_restore(flags);
+}
+
+/* get the device to reload its coefficients from EEPROM and wait for it
+ * to complete
+ */
+
+static int __lis302dl_reset_device(struct lis302dl_info *lis)
+{
+	int timeout = 10;
+
+	__reg_write(lis, LIS302DL_REG_CTRL2,
+			LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
+
+	while ((__reg_read(lis, LIS302DL_REG_CTRL2)
+			& LIS302DL_CTRL2_BOOT) && (timeout--))
+		mdelay(1);
+
+	return !!(timeout < 0);
+}
+
+static int __devinit lis302dl_probe(struct spi_device *spi)
+{
+	int rc;
+	struct lis302dl_info *lis;
+	u_int8_t wai;
+	unsigned long flags;
+	struct lis302dl_platform_data *pdata = spi->dev.platform_data;
+
+	spi->mode = SPI_MODE_3;
+	rc = spi_setup(spi);
+	if (rc < 0) {
+		dev_err(&spi->dev, "spi_setup failed\n");
+		return rc;
+	}
+
+	lis = kzalloc(sizeof(*lis), GFP_KERNEL);
+	if (!lis)
+		return -ENOMEM;
+
+	lis->dev = &spi->dev;
+	lis->spi = spi;
+
+	dev_set_drvdata(lis->dev, lis);
+
+	lis->pdata = pdata;
+
+	rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
+	if (rc) {
+		dev_err(lis->dev, "error creating sysfs group\n");
+		goto bail_free_lis;
+	}
+
+	/* initialize input layer details */
+	lis->input_dev = input_allocate_device();
+	if (!lis->input_dev) {
+		dev_err(lis->dev, "Unable to allocate input device\n");
+		goto bail_sysfs;
+	}
+
+	input_set_drvdata(lis->input_dev, lis);
+	lis->input_dev->name = pdata->name;
+	 /* SPI Bus not defined as a valid bus for input subsystem*/
+	lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
+	lis->input_dev->open = lis302dl_input_open;
+	lis->input_dev->close = lis302dl_input_close;
+
+	rc = input_register_device(lis->input_dev);
+	if (rc) {
+		dev_err(lis->dev, "error %d registering input device\n", rc);
+		goto bail_inp_dev;
+	}
+
+	local_irq_save(flags);
+	/* Configure our IO */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I);
+	if (wai != LIS302DL_WHO_AM_I_MAGIC) {
+		dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
+		dev_set_drvdata(lis->dev, NULL);
+		rc = -ENODEV;
+		local_irq_restore(flags);
+		goto bail_inp_reg;
+	}
+
+	set_bit(EV_ABS, lis->input_dev->evbit);
+	input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
+	input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
+	input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
+
+	lis->threshold = 0;
+	lis->duration = 0;
+	memset(&lis->wakeup, 0, sizeof(lis->wakeup));
+
+	if (__lis302dl_reset_device(lis))
+		dev_err(lis->dev, "device BOOT reload failed\n");
+
+	/* force us powered */
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
+			LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen |
+			LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	__reg_write(lis, LIS302DL_REG_CTRL2, 0);
+	__reg_write(lis, LIS302DL_REG_CTRL3,
+			LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
+	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
+	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
+
+	/* start off in powered down mode; we power up when someone opens us */
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
+
+	if (pdata->open_drain)
+		/* switch interrupt to open collector, active-low */
+		__reg_write(lis, LIS302DL_REG_CTRL3,
+				LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+	else
+		/* push-pull, active-low */
+		__reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
+
+	__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
+	__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
+
+	__reg_read(lis, LIS302DL_REG_STATUS);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+	__reg_read(lis, LIS302DL_REG_CLICK_SRC);
+	local_irq_restore(flags);
+
+	dev_info(lis->dev, "Found %s\n", pdata->name);
+
+	lis->pdata = pdata;
+
+	set_irq_handler(lis->pdata->interrupt, handle_level_irq);
+
+	rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
+			 IRQF_TRIGGER_LOW, "lis302dl", lis);
+
+	if (rc < 0) {
+		dev_err(lis->dev, "error requesting IRQ %d\n",
+			lis->pdata->interrupt);
+		goto bail_inp_reg;
+	}
+	return 0;
+
+bail_inp_reg:
+	input_unregister_device(lis->input_dev);
+bail_inp_dev:
+	input_free_device(lis->input_dev);
+bail_sysfs:
+	sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
+bail_free_lis:
+	kfree(lis);
+	return rc;
+}
+
+static int __devexit lis302dl_remove(struct spi_device *spi)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+
+	/* Disable interrupts */
+	if (lis->flags & LIS302DL_F_IRQ_WAKE)
+		disable_irq_wake(lis->pdata->interrupt);
+	free_irq(lis->pdata->interrupt, lis);
+
+	/* Reset and power down the device */
+	local_irq_save(flags);
+	__reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
+	__reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
+	__reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
+	local_irq_restore(flags);
+
+	/* Cleanup resources */
+	sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
+	input_unregister_device(lis->input_dev);
+	if (lis->input_dev)
+		input_free_device(lis->input_dev);
+	dev_set_drvdata(lis->dev, NULL);
+	kfree(lis);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static u8 regs_to_save[] = {
+	LIS302DL_REG_CTRL1,
+	LIS302DL_REG_CTRL2,
+	LIS302DL_REG_CTRL3,
+	LIS302DL_REG_FF_WU_CFG_1,
+	LIS302DL_REG_FF_WU_THS_1,
+	LIS302DL_REG_FF_WU_DURATION_1,
+	LIS302DL_REG_FF_WU_CFG_2,
+	LIS302DL_REG_FF_WU_THS_2,
+	LIS302DL_REG_FF_WU_DURATION_2,
+	LIS302DL_REG_CLICK_CFG,
+	LIS302DL_REG_CLICK_THSY_X,
+	LIS302DL_REG_CLICK_THSZ,
+	LIS302DL_REG_CLICK_TIME_LIMIT,
+	LIS302DL_REG_CLICK_LATENCY,
+	LIS302DL_REG_CLICK_WINDOW,
+
+};
+
+static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+	u_int8_t tmp;
+	int n;
+
+	/* determine if we want to wake up from the accel. */
+	if (lis->flags & LIS302DL_F_WUP_CLICK)
+		return 0;
+
+	disable_irq(lis->pdata->interrupt);
+	local_irq_save(flags);
+
+	/*
+	 * When we share SPI over multiple sensors, there is a race here
+	 * that one or more sensors will lose.  In that case, the shared
+	 * SPI bus GPIO will be in sleep mode and partially pulled down.  So
+	 * we explicitly put our IO into "wake" mode here before the final
+	 * traffic to the sensor.
+	 */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	/* save registers */
+	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+		lis->regs[regs_to_save[n]] =
+			__reg_read(lis, regs_to_save[n]);
+
+	/* power down or enable wakeup */
+
+	if (lis->wakeup.threshold == 0) {
+		tmp = __reg_read(lis, LIS302DL_REG_CTRL1);
+		tmp &= ~LIS302DL_CTRL1_PD;
+		__reg_write(lis, LIS302DL_REG_CTRL1, tmp);
+	} else
+		__enable_wakeup(lis);
+
+	/* place our IO to the device in sleep-compatible states */
+	(lis->pdata->lis302dl_suspend_io)(lis, 0);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int lis302dl_resume(struct spi_device *spi)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+	int n;
+
+	if (lis->flags & LIS302DL_F_WUP_CLICK)
+		return 0;
+
+	local_irq_save(flags);
+
+	/* get our IO to the device back in operational states */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	/* resume from powerdown first! */
+	__reg_write(lis, LIS302DL_REG_CTRL1,
+			LIS302DL_CTRL1_PD |
+			LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen |
+			LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	if (__lis302dl_reset_device(lis))
+		dev_err(&spi->dev, "device BOOT reload failed\n");
+
+	lis->regs[LIS302DL_REG_CTRL1] |=	LIS302DL_CTRL1_PD |
+						LIS302DL_CTRL1_Xen |
+						LIS302DL_CTRL1_Yen |
+						LIS302DL_CTRL1_Zen;
+
+	/* restore registers after resume */
+	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+		__reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
+
+	/* if someone had us open, reset the non-wake threshold stuff */
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__enable_data_collection(lis);
+
+	local_irq_restore(flags);
+	enable_irq(lis->pdata->interrupt);
+
+	return 0;
+}
+#else
+#define lis302dl_suspend	NULL
+#define lis302dl_resume		NULL
+#endif
+
+static struct spi_driver lis302dl_spi_driver = {
+	.driver = {
+		.name = "lis302dl",
+		.owner = THIS_MODULE,
+	},
+
+	.probe 	= lis302dl_probe,
+	.remove	= __devexit_p(lis302dl_remove),
+	.suspend = lis302dl_suspend,
+	.resume	 = lis302dl_resume,
+};
+
+static int __devinit lis302dl_init(void)
+{
+	return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+	spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 0000000..f980bfc
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,593 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * iPAQ H1940 touchscreen support
+ *
+ * ChangeLog
+ *
+ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
+ *      - added clock (de-)allocation code
+ *
+ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - h1940_ -> s3c2410 (this driver is now also used on the n30
+ *        machines :P)
+ *      - Debug messages are now enabled with the config option
+ *        TOUCHSCREEN_S3C2410_DEBUG
+ *      - Changed the way the value are read
+ *      - Input subsystem should now work
+ *      - Use ioremap and readl/writel
+ *
+ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - Make use of some undocumented features of the touchscreen
+ *        controller
+ *
+ * 2007-05-23: Harald Welte <laforge@openmoko.org>
+ *      - Add proper support for S32440
+ *
+ * 2008-06-23: Andy Green <andy@openmoko.com>
+ *      - removed averaging system
+ *      - added generic Touchscreen filter stuff
+ *
+ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *      - improve interrupt handling
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/ts.h>
+#include <mach/hardware.h>
+#include <plat/regs-adc.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+
+/* For ts.dev.id.version */
+#define S3C2410TSVERSION	0x0101
+
+#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define WAIT4INT(x)  (((x)<<8) | \
+		     S3C2410_ADCTSC_YM_SEN | \
+		     S3C2410_ADCTSC_YP_SEN | \
+		     S3C2410_ADCTSC_XP_SEN | \
+		     S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST	     (S3C2410_ADCTSC_YM_SEN | \
+		      S3C2410_ADCTSC_YP_SEN | \
+		      S3C2410_ADCTSC_XP_SEN | \
+		      S3C2410_ADCTSC_AUTO_PST | \
+		      S3C2410_ADCTSC_XY_PST(0))
+
+#define DEBUG_LVL    KERN_DEBUG
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+static char *s3c2410ts_name = "s3c2410 TouchScreen";
+
+#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */
+
+#define TS_STATE_STANDBY 0 /* initial state */
+#define TS_STATE_PRESSED 1
+#define TS_STATE_RELEASE_PENDING 2
+#define TS_STATE_RELEASE 3
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct s3c2410ts {
+	struct input_dev *dev;
+	struct ts_filter_chain *chain;
+	int is_down;
+	int state;
+	struct kfifo *event_fifo;
+};
+
+static struct s3c2410ts ts;
+
+static void __iomem *base_addr;
+
+/*
+ * A few low level functions.
+ */
+
+static inline void s3c2410_ts_connect(void)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON);
+}
+
+static void s3c2410_ts_start_adc_conversion(void)
+{
+	writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+	       base_addr + S3C2410_ADCTSC);
+	writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START,
+	       base_addr + S3C2410_ADCCON);
+}
+
+/*
+ * Just send the input events.
+ */
+
+enum ts_input_event {IE_DOWN = 0, IE_UP};
+
+static void ts_input_report(int event, int coords[])
+{
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	static char *s[] = {"down", "up"};
+	struct timeval tv;
+
+	do_gettimeofday(&tv);
+#endif
+
+	if (event == IE_DOWN) {
+		input_report_abs(ts.dev, ABS_X, coords[0]);
+		input_report_abs(ts.dev, ABS_Y, coords[1]);
+		input_report_key(ts.dev, BTN_TOUCH, 1);
+		input_report_abs(ts.dev, ABS_PRESSURE, 1);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+		printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n",
+		       (int)tv.tv_usec, s[event], coords[0], coords[1]);
+#endif
+	} else {
+		input_report_key(ts.dev, BTN_TOUCH, 0);
+		input_report_abs(ts.dev, ABS_PRESSURE, 0);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+		printk(DEBUG_LVL "T:%06d %6s\n",
+		       (int)tv.tv_usec, s[event]);
+#endif
+	}
+
+	input_sync(ts.dev);
+}
+
+/*
+ * Manage the state of the touchscreen.
+ */
+
+static void event_send_timer_f(unsigned long data);
+
+static struct timer_list event_send_timer =
+		TIMER_INITIALIZER(event_send_timer_f, 0, 0);
+
+static void event_send_timer_f(unsigned long data)
+{
+	static int noop_counter;
+	int event_type;
+
+	while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
+			   sizeof(int))) {
+		int buf[2];
+
+		switch (event_type) {
+		case 'D':
+			if (ts.state == TS_STATE_RELEASE_PENDING)
+				/* Ignore short UP event */
+				ts.state = TS_STATE_PRESSED;
+			break;
+
+		case 'U':
+			ts.state = TS_STATE_RELEASE_PENDING;
+			break;
+
+		case 'P':
+			if (ts.is_down) /* stylus_action needs a conversion */
+				s3c2410_ts_start_adc_conversion();
+
+			if (unlikely(__kfifo_get(ts.event_fifo,
+						 (unsigned char *)buf,
+						 sizeof(int) * 2)
+				     != sizeof(int) * 2))
+				goto ts_exit_error;
+
+			ts_input_report(IE_DOWN, buf);
+			ts.state = TS_STATE_PRESSED;
+			break;
+
+		default:
+			goto ts_exit_error;
+		}
+
+		noop_counter = 0;
+	}
+
+	if (noop_counter++ >= 1) {
+		noop_counter = 0;
+		if (ts.state == TS_STATE_RELEASE_PENDING) {
+			/*
+			 * We delay the UP event for a while to avoid jitter.
+			 * If we get a DOWN event we do not send it.
+			 */
+			ts_input_report(IE_UP, NULL);
+			ts.state = TS_STATE_STANDBY;
+
+			ts_filter_chain_clear(ts.chain);
+		}
+	} else {
+		mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
+	}
+
+	return;
+
+ts_exit_error: /* should not happen unless we have a bug */
+	printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n");
+}
+
+/*
+ * Manage interrupts.
+ */
+
+static irqreturn_t stylus_updown(int irq, void *dev_id)
+{
+	unsigned long data0;
+	unsigned long data1;
+	int event_type;
+
+	data0 = readl(base_addr+S3C2410_ADCDAT0);
+	data1 = readl(base_addr+S3C2410_ADCDAT1);
+
+	ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) &&
+					    (!(data1 & S3C2410_ADCDAT0_UPDOWN));
+
+	event_type = ts.is_down ? 'D' : 'U';
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
+		     sizeof(int)) != sizeof(int))) /* should not happen */
+		printk(KERN_ERR __FILE__": stylus_updown lost event!\n");
+
+	if (ts.is_down)
+		s3c2410_ts_start_adc_conversion();
+	else
+		writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stylus_action(int irq, void *dev_id)
+{
+	int buf[3];
+
+	/* Grab the ADC results. */
+	buf[1] = readl(base_addr + S3C2410_ADCDAT0) &
+		       S3C2410_ADCDAT0_XPDATA_MASK;
+	buf[2] = readl(base_addr + S3C2410_ADCDAT1) &
+		       S3C2410_ADCDAT1_YPDATA_MASK;
+
+	switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
+	case 0:
+		/* The filter wants more points. */
+		s3c2410_ts_start_adc_conversion();
+		return IRQ_HANDLED;
+	case 1:
+		/* We have a point from the filters or no filtering enabled. */
+		buf[0] = 'P';
+		break;
+	default:
+		printk(KERN_ERR __FILE__
+		       ":%d Invalid ts_filter_chain_feed return value.\n",
+		       __LINE__);
+	case -1:
+		/* Error. Ignore the event. */
+		ts_filter_chain_clear(ts.chain);
+		writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+		return IRQ_HANDLED;
+	};
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
+		     sizeof(int) * 3) != sizeof(int) * 3))
+		printk(KERN_ERR __FILE__":stylus_action bug.\n");
+
+	writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return IRQ_HANDLED;
+}
+
+static struct clk	*adc_clock;
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init s3c2410ts_probe(struct platform_device *pdev)
+{
+	int rc;
+	struct s3c2410_ts_mach_info *info;
+	struct input_dev *input_dev;
+	int ret = 0;
+
+	dev_info(&pdev->dev, "Starting\n");
+
+	info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+	if (!info)
+	{
+		dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n");
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	printk(DEBUG_LVL "Entering s3c2410ts_init\n");
+#endif
+
+	adc_clock = clk_get(NULL, "adc");
+	if (!adc_clock) {
+		dev_err(&pdev->dev, "failed to get adc clock source\n");
+		return -ENOENT;
+	}
+	clk_enable(adc_clock);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	printk(DEBUG_LVL "got and enabled clock\n");
+#endif
+
+	base_addr = ioremap(S3C2410_PA_ADC,0x20);
+	if (base_addr == NULL) {
+		dev_err(&pdev->dev, "Failed to remap register block\n");
+		ret = -ENOMEM;
+		goto bail0;
+	}
+
+
+	/* If we acutally are a S3C2410: Configure GPIOs */
+	if (!strcmp(pdev->name, "s3c2410-ts"))
+		s3c2410_ts_connect();
+
+	if ((info->presc & 0xff) > 0)
+		writel(S3C2410_ADCCON_PRSCEN |
+		       S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+						    base_addr + S3C2410_ADCCON);
+	else
+		writel(0, base_addr+S3C2410_ADCCON);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff,  base_addr + S3C2410_ADCDLY);
+
+	writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+	/* Initialise input stuff */
+	memset(&ts, 0, sizeof(struct s3c2410ts));
+	input_dev = input_allocate_device();
+
+	if (!input_dev) {
+		dev_err(&pdev->dev, "Unable to allocate the input device\n");
+		ret = -ENOMEM;
+		goto bail1;
+	}
+
+	ts.dev = input_dev;
+	ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
+			   BIT_MASK(EV_ABS);
+	ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
+
+	ts.dev->name = s3c2410ts_name;
+	ts.dev->id.bustype = BUS_RS232;
+	ts.dev->id.vendor = 0xDEAD;
+	ts.dev->id.product = 0xBEEF;
+	ts.dev->id.version = S3C2410TSVERSION;
+	ts.state = TS_STATE_STANDBY;
+	ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
+	if (IS_ERR(ts.event_fifo)) {
+		ret = -EIO;
+		goto bail2;
+	}
+
+	/* create the filter chain set up for the 2 coordinates we produce */
+	ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
+
+	if (IS_ERR(ts.chain))
+		goto bail2;
+
+	ts_filter_chain_clear(ts.chain);
+
+	/* Get irqs */
+	if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM,
+						    "s3c2410_action", ts.dev)) {
+		dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n");
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail3;
+	}
+	if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,
+			"s3c2410_action", ts.dev)) {
+		dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
+		free_irq(IRQ_ADC, ts.dev);
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail4;
+	}
+
+	dev_info(&pdev->dev, "Successfully loaded\n");
+
+	/* All went ok, so register to the input system */
+	rc = input_register_device(ts.dev);
+	if (rc) {
+		ret = -EIO;
+		goto bail5;
+	}
+
+	return 0;
+
+bail5:
+	free_irq(IRQ_TC, ts.dev);
+	free_irq(IRQ_ADC, ts.dev);
+	clk_disable(adc_clock);
+	iounmap(base_addr);
+	disable_irq(IRQ_TC);
+bail4:
+	disable_irq(IRQ_ADC);
+bail3:
+	ts_filter_chain_destroy(ts.chain);
+	kfifo_free(ts.event_fifo);
+bail2:
+	input_unregister_device(ts.dev);
+bail1:
+	iounmap(base_addr);
+bail0:
+
+	return ret;
+}
+
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+	disable_irq(IRQ_ADC);
+	disable_irq(IRQ_TC);
+	free_irq(IRQ_TC,ts.dev);
+	free_irq(IRQ_ADC,ts.dev);
+
+	if (adc_clock) {
+		clk_disable(adc_clock);
+		clk_put(adc_clock);
+		adc_clock = NULL;
+	}
+
+	input_unregister_device(ts.dev);
+	iounmap(base_addr);
+
+	ts_filter_chain_destroy(ts.chain);
+
+	kfifo_free(ts.event_fifo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC);
+	writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+	       base_addr+S3C2410_ADCCON);
+
+	disable_irq(IRQ_ADC);
+	disable_irq(IRQ_TC);
+
+	clk_disable(adc_clock);
+
+	return 0;
+}
+
+static int s3c2410ts_resume(struct platform_device *pdev)
+{
+	struct s3c2410_ts_mach_info *info =
+		( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+	clk_enable(adc_clock);
+	mdelay(1);
+
+	ts_filter_chain_clear(ts.chain);
+
+	enable_irq(IRQ_ADC);
+	enable_irq(IRQ_TC);
+
+	if ((info->presc&0xff) > 0)
+		writel(S3C2410_ADCCON_PRSCEN |
+		       S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+						      base_addr+S3C2410_ADCCON);
+	else
+		writel(0,base_addr+S3C2410_ADCCON);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff,  base_addr+S3C2410_ADCDLY);
+
+	writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+	return 0;
+}
+
+#else
+#define s3c2410ts_suspend NULL
+#define s3c2410ts_resume  NULL
+#endif
+
+static struct platform_driver s3c2410ts_driver = {
+       .driver         = {
+	       .name   = "s3c2410-ts",
+	       .owner  = THIS_MODULE,
+       },
+       .probe          = s3c2410ts_probe,
+       .remove         = s3c2410ts_remove,
+       .suspend        = s3c2410ts_suspend,
+       .resume         = s3c2410ts_resume,
+
+};
+
+static struct platform_driver s3c2440ts_driver = {
+       .driver         = {
+	       .name   = "s3c2440-ts",
+	       .owner  = THIS_MODULE,
+       },
+       .probe          = s3c2410ts_probe,
+       .remove         = s3c2410ts_remove,
+       .suspend        = s3c2410ts_suspend,
+       .resume         = s3c2410ts_resume,
+
+};
+
+static int __init s3c2410ts_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&s3c2410ts_driver);
+	if (rc < 0)
+		return rc;
+
+	rc = platform_driver_register(&s3c2440ts_driver);
+	if (rc < 0)
+		platform_driver_unregister(&s3c2410ts_driver);
+
+	return rc;
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+	platform_driver_unregister(&s3c2440ts_driver);
+	platform_driver_unregister(&s3c2410ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c
new file mode 100644
index 0000000..e6bb382
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#include <linux/touchscreen/ts_filter.h>
+
+/*
+ * Tux, would you like the following function in /lib?
+ * It helps us avoid silly code.
+ */
+
+/**
+ * sptrlen - Count how many non-null pointers are in a pointer array
+ * @arr: The array of pointers
+ */
+static int sptrlen(const void *arr)
+{
+	/* All pointers have the same size. */
+	const int **p = (const int **)arr;
+	int len = 0;
+
+	while (*(p++))
+		len++;
+
+	return len;
+}
+
+
+struct ts_filter_chain {
+	/* All of the filters. */
+	struct ts_filter **arr;
+	/* Filters that can propagate values in the chain. */
+	struct ts_filter **pchain;
+	/* Length of the pchain array. */
+	int pchain_len;
+	/* FIXME: Add a spinlock and use it. */
+};
+
+struct ts_filter_chain *ts_filter_chain_create(
+	struct platform_device *pdev,
+	const struct ts_filter_chain_configuration conf[],
+	int count_coords)
+{
+	struct ts_filter_chain *c;
+	int count = 0;
+	int len;
+
+	BUG_ON((count_coords < 1));
+	BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
+
+	c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
+	if (!c)
+		goto create_err_1;
+
+	len = (sptrlen(conf) + 1);
+	/* Memory for two null-terminated arrays of filters. */
+	c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
+	if (!c->arr)
+		goto create_err_1;
+	c->pchain = c->arr + len;
+
+	while (conf->api) {
+		/* TODO: Can we get away with only sending pdev->dev? */
+		struct ts_filter *f =
+			(conf->api->create)(pdev, conf->config, count_coords);
+		if (!f) {
+			dev_info(&pdev->dev, "Filter %d creation failed\n",
+				 count);
+			goto create_err_2;
+		}
+
+		f->api = conf->api;
+		c->arr[count++] = f;
+
+		if (f->api->haspoint && f->api->getpoint && f->api->process)
+			c->pchain[c->pchain_len++] = f;
+
+		conf++;
+	}
+
+	dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
+
+	return c;
+
+create_err_2:
+	ts_filter_chain_destroy(c); /* Also frees c. */
+create_err_1:
+	dev_info(&pdev->dev, "Error in filter chain initialization\n");
+	/*
+	 * FIXME: Individual filters have to return errors this way.
+	 * We only have to forward the errors we find.
+	 */
+	return ERR_PTR(-ENOMEM);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_create);
+
+void ts_filter_chain_destroy(struct ts_filter_chain *c)
+{
+	if (c->arr) {
+		struct ts_filter **a = c->arr;
+		while (*a) {
+			((*a)->api->destroy)(*a);
+			a++;
+		}
+		kfree(c->arr);
+	}
+	kfree(c);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
+
+void ts_filter_chain_clear(struct ts_filter_chain *c)
+{
+	struct ts_filter **a = c->arr;
+
+	while (*a) {
+		if ((*a)->api->clear)
+			((*a)->api->clear)(*a);
+		a++;
+	}
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
+
+static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
+{
+	struct ts_filter **a = c->arr;
+	while (*a) {
+		if ((*a)->api->scale)
+			((*a)->api->scale)(*a, coords);
+		a++;
+	}
+}
+
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
+{
+	int len = c->pchain_len;
+	int i = len - 1;
+
+	if (!c->pchain[0])
+		return 1; /* Nothing to do. */
+
+	BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
+
+	if (c->pchain[0]->api->process(c->pchain[0], coords))
+		return -1;
+
+	while (i >= 0 && i < len) {
+		if (c->pchain[i]->api->haspoint(c->pchain[i])) {
+			c->pchain[i]->api->getpoint(c->pchain[i], coords);
+			if (++i < len &&
+			    c->pchain[i]->api->process(c->pchain[i], coords))
+				return -1; /* Error. */
+		} else {
+			i--;
+		}
+	}
+
+	if (i >= 0) {	/* Same as i == len. */
+		ts_filter_chain_scale(c, coords);
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c
new file mode 100644
index 0000000..f53f16d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c
@@ -0,0 +1,296 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ *
+ * This filter is useful to reject samples that are not reliable. We consider
+ * that a sample is not reliable if it deviates form the Majority.
+ *
+ * 1) We collect S samples.
+ *
+ * 2) For each dimension:
+ *
+ *  - We sort the points.
+ *  - Points that are "close enough" are considered to be in the same set.
+ *  - We choose the set with more elements. If more than "threshold"
+ *    points are in this set we use the first and the last point of the set
+ *    to define the valid range for this dimension [min, max], otherwise we
+ *    discard all the points and go to step 1.
+ *
+ * 3) We consider the unsorted S samples and try to feed them to the next
+ *    filter in the chain. If one of the points of each sample
+ *    is not in the allowed range for its dimension, we discard the sample.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/touchscreen/ts_filter_group.h>
+
+struct ts_filter_group {
+	/* Private filter configuration. */
+	struct ts_filter_group_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	int N;			/* How many samples we have. */
+	int *samples[MAX_TS_FILTER_COORDS];	/* The samples: our input. */
+
+	int *group_size;	/* Used for temporal computations. */
+	int *sorted_samples;	/* Used for temporal computations. */
+
+	int range_max[MAX_TS_FILTER_COORDS];	/* Max. computed ranges. */
+	int range_min[MAX_TS_FILTER_COORDS];	/* Min. computed ranges. */
+
+	int tries_left;		/* We finish if we don't get enough samples. */
+	int ready;		/* If we are ready to deliver samples. */
+	int result;		/* Index of the point being returned. */
+};
+
+#define ts_filter_to_filter_group(f) \
+	container_of(f, struct ts_filter_group, tsf)
+
+
+static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
+					   int attempts)
+{
+	tsfg->N = 0;
+	tsfg->tries_left = attempts;
+	tsfg->ready = 0;
+	tsfg->result = 0;
+}
+
+static void ts_filter_group_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+}
+
+static struct ts_filter *ts_filter_group_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_group *tsfg;
+	int i;
+
+	tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
+	if (!tsfg)
+		return NULL;
+
+	tsfg->config = container_of(conf,
+				    struct ts_filter_group_configuration,
+				    config);
+	tsfg->tsf.count_coords = count_coords;
+
+	BUG_ON(tsfg->config->attempts <= 0);
+
+	tsfg->samples[0] = kmalloc((2 + count_coords) * sizeof(int) *
+				   tsfg->config->length, GFP_KERNEL);
+	if (!tsfg->samples[0]) {
+		kfree(tsfg);
+		return NULL;
+	}
+	for (i = 1; i < count_coords; ++i)
+		tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
+	tsfg->sorted_samples = tsfg->samples[0] + count_coords *
+			       tsfg->config->length;
+	tsfg->group_size = tsfg->samples[0] + (1 + count_coords) *
+			       tsfg->config->length;
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+
+	dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
+		 "thresh:%d\n", tsfg->config->length, count_coords,
+		 tsfg->config->close_enough, tsfg->config->threshold);
+
+	return &tsfg->tsf;
+}
+
+static void ts_filter_group_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	kfree(tsfg->samples[0]); /* first guy has pointer from kmalloc */
+	kfree(tsf);
+}
+
+static int int_cmp(const void *_a, const void *_b)
+{
+	const int *a = _a;
+	const int *b = _b;
+
+	if (*a > *b)
+		return 1;
+	if (*a < *b)
+		return -1;
+	return 0;
+}
+
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+
+static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+	int n;
+	int i;
+
+	BUG_ON(tsfg->N >= tsfg->config->length);
+	BUG_ON(tsfg->ready);
+
+	for (n = 0; n < tsf->count_coords; n++)
+		tsfg->samples[n][tsfg->N] = coords[n];
+
+	if (++tsfg->N < tsfg->config->length)
+		return 0;	/* We need more samples. */
+
+	for (n = 0; n < tsfg->tsf.count_coords; n++) {
+		int *v = tsfg->sorted_samples;
+		int ngroups = 0;
+		int best_size;
+		int best_idx = 0;
+		int idx = 0;
+
+		memcpy(v, tsfg->samples[n], tsfg->N * sizeof(int));
+		/*
+		 * FIXME: Remove this sort call. We already have the
+		 * algorithm for this modification. The filter will
+		 * need less points (about half) if there is not a
+		 * lot of noise. Right now we are doing a constant
+		 * amount of work no matter how much noise we are
+		 * dealing with.
+		 */
+		sort(v, tsfg->N, sizeof(int), int_cmp, NULL);
+
+		tsfg->group_size[0] = 1;
+		for (i = 1; i < tsfg->N; ++i) {
+			if (v[i] - v[i - 1] <= tsfg->config->close_enough)
+				tsfg->group_size[ngroups]++;
+			else
+				tsfg->group_size[++ngroups] = 1;
+		}
+		ngroups++;
+
+		best_size = tsfg->group_size[0];
+		for (i = 1; i < ngroups; i++) {
+			idx += tsfg->group_size[i - 1];
+			if (best_size < tsfg->group_size[i]) {
+				best_size = tsfg->group_size[i];
+				best_idx = idx;
+			}
+		}
+
+		if (best_size < tsfg->config->threshold) {
+			/* This set is not good enough for us. */
+			if (--tsfg->tries_left) {
+				ts_filter_group_clear_internal
+					(tsfg, tsfg->tries_left);
+				/* No errors but we need more samples. */
+				return 0;
+			}
+			return 1; /* We give up: error. */
+		}
+
+		tsfg->range_min[n] = v[best_idx];
+		tsfg->range_max[n] = v[best_idx + best_size - 1];
+	}
+
+	ts_filter_group_prepare_next(tsf);
+
+	return 0;
+}
+
+/*
+ * This private function prepares a point that will be returned
+ * in ts_filter_group_getpoint if it is available. It updates
+ * the priv->ready state also.
+ */
+static void ts_filter_group_prepare_next(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	while (priv->result < priv->N) {
+		for (n = 0; n < priv->tsf.count_coords; ++n) {
+			if (priv->samples[n][priv->result] <
+			    priv->range_min[n] ||
+			    priv->samples[n][priv->result] > priv->range_max[n])
+				break;
+		}
+
+		if (n == priv->tsf.count_coords) /* Sample is OK. */
+			break;
+
+		priv->result++;
+	}
+
+	if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
+		ts_filter_group_clear_internal(priv, priv->config->attempts);
+		priv->ready = 0;
+	} else {
+		priv->ready = 1;
+	}
+}
+
+static int ts_filter_group_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < priv->tsf.count_coords; n++)
+		point[n] = priv->samples[n][priv->result];
+
+	priv->result++;
+
+	/* This call will update priv->ready. */
+	ts_filter_group_prepare_next(tsf);
+}
+
+/*
+ * Get ready to process the next batch of points, forget
+ * points we could have delivered.
+ */
+static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(priv, priv->config->attempts);
+}
+
+const struct ts_filter_api ts_filter_group_api = {
+	.create =	ts_filter_group_create,
+	.destroy =	ts_filter_group_destroy,
+	.clear =	ts_filter_group_clear,
+	.process =	ts_filter_group_process,
+	.haspoint =	ts_filter_group_haspoint,
+	.getpoint =	ts_filter_group_getpoint,
+	.scale =	ts_filter_group_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_group_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c
new file mode 100644
index 0000000..0a595c5
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c
@@ -0,0 +1,212 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ * Linearly scale touchscreen values.
+ *
+ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
+ * using sysfs.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/touchscreen/ts_filter_linear.h>
+
+struct ts_filter_linear;
+
+/* Sysfs code. */
+
+struct const_obj {
+	/* The actual private object. */
+	struct ts_filter_linear *tsfl;
+	/* Our kobject. */
+	struct kobject kobj;
+};
+
+#define to_const_obj(x) container_of(x, struct const_obj, kobj)
+
+struct const_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+#define to_const_attr(x) container_of(x, struct const_attribute, attr)
+
+
+/* Private linear filter structure. */
+
+struct ts_filter_linear {
+	/* Private configuration for this filter. */
+	struct ts_filter_linear_configuration *config;
+
+	/* Generic filter API. */
+	struct ts_filter tsf;
+
+	/* Linear constants for the transformation. */
+	int constants[TS_FILTER_LINEAR_NCONSTANTS];
+
+	/* Sysfs. */
+
+	/* Our const_object. */
+	struct const_obj c_obj;
+	/* Our type. We will stick operations to it. */
+	struct kobj_type const_ktype;
+	/* Attrs. of the virtual files. */
+	struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
+	/* Default Attrs. Always NULL for us. */
+	struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
+	/* Storage for the name of the virtual files. */
+	char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
+};
+
+#define ts_filter_to_filter_linear(f) \
+	container_of(f, struct ts_filter_linear, tsf)
+
+/* Sysfs functions. */
+
+static ssize_t const_attr_show(struct kobject *kobj,
+			       struct attribute *attr,
+			       char *buf)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->show(to_const_obj(kobj), a, buf);
+}
+
+static ssize_t const_attr_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buf, size_t len)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->store(to_const_obj(kobj), a, buf, len);
+}
+
+static struct sysfs_ops const_sysfs_ops = {
+	.show =		const_attr_show,
+	.store =	const_attr_store,
+};
+
+static void const_release(struct kobject *kobj)
+{
+	kfree(to_const_obj(kobj)->tsfl);
+}
+
+static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
+			  char *buf)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
+}
+
+static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	sscanf(buf, "%d", &obj->tsfl->constants[who]);
+	return count;
+}
+
+/* Filter functions. */
+
+static struct ts_filter *ts_filter_linear_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_linear *tsfl;
+	int i;
+	int ret;
+
+	tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
+	if (!tsfl)
+		return NULL;
+
+	tsfl->config = container_of(conf,
+				    struct ts_filter_linear_configuration,
+				    config);
+
+	tsfl->tsf.count_coords = count_coords;
+
+	for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
+		tsfl->constants[i] = tsfl->config->constants[i];
+
+		/* sysfs */
+		sprintf(tsfl->attr_names[i], "%d", i);
+		tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
+		tsfl->kattrs[i].attr.mode = 0666;
+		tsfl->kattrs[i].show = const_show;
+		tsfl->kattrs[i].store = const_store;
+		tsfl->attrs[i] = &tsfl->kattrs[i].attr;
+	}
+	tsfl->attrs[i] = NULL;
+
+	tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
+	tsfl->const_ktype.release = const_release;
+	tsfl->const_ktype.default_attrs = tsfl->attrs;
+	tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
+
+	ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
+				   &pdev->dev.kobj, "calibration");
+	if (ret) {
+		kobject_put(&tsfl->c_obj.kobj);
+		return NULL;
+	}
+
+	dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
+
+	return &tsfl->tsf;
+}
+
+static void ts_filter_linear_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	/* Kernel frees tsfl in const_release. */
+	kobject_put(&tsfl->c_obj.kobj);
+}
+
+static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	int *k = tsfl->constants;
+	int c0 = coords[tsfl->config->coord0];
+	int c1 = coords[tsfl->config->coord1];
+
+	coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
+	coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
+}
+
+const struct ts_filter_api ts_filter_linear_api = {
+	.create =	ts_filter_linear_create,
+	.destroy =	ts_filter_linear_destroy,
+	.scale =	ts_filter_linear_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_linear_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c
new file mode 100644
index 0000000..8b85f67
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c
@@ -0,0 +1,174 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009
+ *       Andy Green <andy@openmoko.com>
+ *       Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ * Simple mean filter.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/touchscreen/ts_filter_mean.h>
+
+struct ts_filter_mean {
+	/* Copy of the private filter configuration. */
+	struct ts_filter_mean_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	/* Index on a circular buffer. */
+	int curr;
+	/* Useful to tell if the circular buffer is full(read:ready). */
+	int count;
+	/* Sumation used to compute the mean. */
+	int sum[MAX_TS_FILTER_COORDS];
+	/* Keep point values and decrement them from the sum on time. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Store the output of this filter. */
+	int ready;
+};
+
+#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
+
+
+static void ts_filter_mean_clear(struct ts_filter *tsf);
+
+static struct ts_filter *ts_filter_mean_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_mean *priv;
+	int *v;
+	int n;
+
+	priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->tsf.count_coords = count_coords;
+	priv->config = container_of(conf,
+				    struct ts_filter_mean_configuration,
+				    config);
+
+	BUG_ON(priv->config->length <= 0);
+
+	v = kmalloc(priv->config->length * sizeof(int) * count_coords,
+		    GFP_KERNEL);
+	if (!v)
+		return NULL;
+
+	for (n = 0; n < count_coords; n++) {
+		priv->fifo[n] = v;
+		v += priv->config->length;
+	}
+
+	ts_filter_mean_clear(&priv->tsf);
+
+	dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
+		 priv->config->length, count_coords);
+
+	return &priv->tsf;
+}
+
+static void ts_filter_mean_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
+	kfree(tsf);
+}
+
+static void ts_filter_mean_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	priv->count = 0;
+	priv->curr = 0;
+	priv->ready = 0;
+	memset(priv->sum, 0, tsf->count_coords * sizeof(int));
+}
+
+static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		priv->sum[n] += coords[n];
+		priv->fifo[n][priv->curr] = coords[n];
+	}
+
+	if (priv->count + 1 == priv->config->length)
+		priv->ready = 1;
+	else
+		priv->count++;
+
+	priv->curr = (priv->curr + 1) % priv->config->length;
+
+	return 0; /* No error. */
+}
+
+static int ts_filter_mean_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		point[n] = priv->sum[n];
+		priv->sum[n] -= priv->fifo[n][priv->curr];
+	}
+
+	priv->ready = 0;
+}
+
+static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		coords[n] += priv->config->length >> 1; /* Rounding. */
+		coords[n] /= priv->config->length;
+	}
+}
+
+const struct ts_filter_api ts_filter_mean_api = {
+	.create =	ts_filter_mean_create,
+	.destroy =	ts_filter_mean_destroy,
+	.clear =	ts_filter_mean_clear,
+	.process =	ts_filter_mean_process,
+	.scale =	ts_filter_mean_scale,
+	.haspoint =	ts_filter_mean_haspoint,
+	.getpoint =	ts_filter_mean_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_mean_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c
new file mode 100644
index 0000000..4c230f1
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c
@@ -0,0 +1,261 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008 Andy Green <andy@openmoko.com>
+ *
+ *
+ * Median averaging stuff.  We sort incoming raw samples into an array of
+ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
+ * We then return the sum of the middle three samples for X and Y.  It means
+ * the final result must be divided by (3 * scaling factor) to correct for
+ * avoiding the repeated /3.
+ *
+ * This strongly rejects brief excursions away from a central point that is
+ * sticky in time compared to the excursion duration.
+ *
+ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
+ * Halifinger who pointed out this would be a good method.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/touchscreen/ts_filter_median.h>
+
+struct ts_filter_median {
+	/* Private configuration. */
+	struct ts_filter_median_configuration *config;
+	/* Generic Filter API. */
+	struct ts_filter tsf;
+
+	/* Count raw samples we get. */
+	int samples_count;
+	/*
+	 * Remember the last coordinates we got in order to know if
+	 * we are moving slow or fast.
+	 */
+	int last_issued[MAX_TS_FILTER_COORDS];
+	/* How many samples in the sort buffer are valid. */
+	int valid;
+	/* Samples taken for median in sorted form. */
+	int *sort[MAX_TS_FILTER_COORDS];
+	/* Samples taken for median. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Where we are in the fifo sample memory. */
+	int pos;
+	/* Do we have a sample to deliver? */
+	int ready;
+};
+
+#define ts_filter_to_filter_median(f) \
+	container_of(f, struct ts_filter_median, tsf)
+
+
+static void ts_filter_median_insert(int *p, int sample, int count)
+{
+	int n;
+
+	/* Search through what we got so far to find where to put sample. */
+	for (n = 0; n < count; n++)
+		if (sample < p[n]) {	/* We met somebody bigger than us? */
+			/* Starting from the end, push bigger guys down one. */
+			for (count--; count >= n; count--)
+				p[count + 1] = p[count];
+			p[n] = sample; /* Put us in place of first bigger. */
+			return;
+		}
+
+	p[count] = sample; /* Nobody was bigger than us, add us on the end. */
+}
+
+static void ts_filter_median_del(int *p, int value, int count)
+{
+	int index;
+
+	for (index = 0; index < count; index++)
+		if (p[index] == value) {
+			for (; index < count; index++)
+				p[index] = p[index + 1];
+			return;
+		}
+}
+
+
+static void ts_filter_median_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	tsfm->pos = 0;
+	tsfm->valid = 0;
+	tsfm->ready = 0;
+	memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
+}
+
+static struct ts_filter *ts_filter_median_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	int *p;
+	int n;
+	struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
+								    GFP_KERNEL);
+
+	if (!tsfm)
+		return NULL;
+
+	tsfm->config = container_of(conf,
+				    struct ts_filter_median_configuration,
+				    config);
+
+	tsfm->tsf.count_coords = count_coords;
+
+	tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
+
+	p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
+		    GFP_KERNEL);
+	if (!p) {
+		kfree(tsfm);
+		return NULL;
+	}
+
+	for (n = 0; n < count_coords; n++) {
+		tsfm->sort[n] = p;
+		p += tsfm->config->extent + 1;
+		tsfm->fifo[n] = p;
+		p += tsfm->config->extent + 1;
+	}
+
+	ts_filter_median_clear(&tsfm->tsf);
+
+	dev_info(&pdev->dev,
+		 "Created Median filter len:%d coords:%d dec_threshold:%d\n",
+		 tsfm->config->extent, count_coords,
+		 tsfm->config->decimation_threshold);
+
+	return &tsfm->tsf;
+}
+
+static void ts_filter_median_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
+	kfree(tsf);
+}
+
+static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+
+	for (n = 0; n < tsf->count_coords; n++)
+		coords[n] = (coords[n] + 2) / 3;
+}
+
+/*
+ * Give us the raw sample data coords, and if we return 1 then you can
+ * get a filtered coordinate from coords. If we return 0 you didn't
+ * fill all the filters with samples yet.
+ */
+
+static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+	int n;
+	int movement = 1;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Grab copy in insertion order to remove when oldest. */
+		tsfm->fifo[n][tsfm->pos] = coords[n];
+		/* Insert these samples in sorted order in the median arrays. */
+		ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
+	}
+	/* Move us on in the fifo. */
+	if (++tsfm->pos == (tsfm->config->extent + 1))
+		tsfm->pos = 0;
+
+	/* Have we finished a median sampling? */
+	if (++tsfm->valid < tsfm->config->extent)
+		goto process_exit; /* No valid sample to use. */
+
+	BUG_ON(tsfm->valid != tsfm->config->extent);
+
+	tsfm->valid--;
+
+	/*
+	 * Sum the middle 3 in the median sorted arrays. We don't divide back
+	 * down which increases the sum resolution by a factor of 3 until the
+	 * scale API function is called.
+	 */
+	for (n = 0; n < tsf->count_coords; n++)
+		/* Perform the deletion of the oldest sample. */
+		ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
+				     tsfm->valid);
+
+	tsfm->samples_count--;
+	if (tsfm->samples_count >= 0)
+		goto process_exit;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Give the coordinate result from summing median 3. */
+		coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
+			    tsfm->sort[n][tsfm->config->midpoint] +
+			    tsfm->sort[n][tsfm->config->midpoint + 1];
+
+		movement += abs(tsfm->last_issued[n] - coords[n]);
+	}
+
+	if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
+		tsfm->samples_count = tsfm->config->decimation_above;
+	else
+		tsfm->samples_count = tsfm->config->decimation_below;
+
+	memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
+
+	tsfm->ready = 1;
+
+process_exit:
+	return 0;
+}
+
+static int ts_filter_median_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	BUG_ON(!priv->ready);
+
+	memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
+
+	priv->ready = 0;
+}
+
+const struct ts_filter_api ts_filter_median_api = {
+	.create =	ts_filter_median_create,
+	.destroy =	ts_filter_median_destroy,
+	.clear =	ts_filter_median_clear,
+	.process =	ts_filter_median_process,
+	.scale =	ts_filter_median_scale,
+	.haspoint =	ts_filter_median_haspoint,
+	.getpoint =	ts_filter_median_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_median_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02-vibrator.c b/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02-vibrator.c
new file mode 100644
index 0000000..653a9fb
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02-vibrator.c
@@ -0,0 +1,192 @@
+/*
+ * LED driver for the vibrator of the Openmoko GTA01/GTA02 GSM Phones
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Javi Roman <javiroman@kernel-labs.org>:
+ *	Implement PWM support for GTA01Bv4 and later
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <plat/pwm.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-timer.h>
+#include <linux/gta02-vibrator.h>
+
+#include <linux/gta02-shadow.h>
+
+#define COUNTER 64
+
+static struct gta02_vib_priv {
+	struct led_classdev cdev;
+	unsigned int gpio;
+	spinlock_t lock;
+	unsigned int has_pwm;
+	struct s3c2410_pwm pwm;
+
+	unsigned long vib_gpio_pin; /* which pin to meddle with */
+	u8 vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */
+	u8 vib_pwm_latched;
+	u32 fiq_count;
+
+	struct gta02_vib_platform_data *pdata;
+} gta02_vib_priv;
+
+int gta02_vibrator_fiq_handler(void)
+{
+	gta02_vib_priv.fiq_count++;
+
+	if (!gta02_vib_priv.vib_pwm_latched && !gta02_vib_priv.vib_pwm)
+		/* idle */
+		return 0;
+
+	if ((u8)gta02_vib_priv.fiq_count == gta02_vib_priv.vib_pwm_latched)
+		gta02_gpb_setpin(gta02_vib_priv.vib_gpio_pin, 0);
+
+	if ((u8)gta02_vib_priv.fiq_count)
+		return 1;
+
+	gta02_vib_priv.vib_pwm_latched = gta02_vib_priv.vib_pwm;
+	if (gta02_vib_priv.vib_pwm_latched)
+		gta02_gpb_setpin(gta02_vib_priv.vib_gpio_pin, 1);
+
+	return 1;
+}
+
+static void gta02_vib_vib_set(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+    gta02_vib_priv.vib_pwm = value; /* set it for FIQ */
+    gta02_vib_priv.pdata->kick_fiq(); /* start up FIQs if not already going */
+}
+
+static struct gta02_vib_priv gta02_vib_led = {
+	.cdev = {
+		.name = "gta02:vibrator",
+		.brightness_set = gta02_vib_vib_set,
+	},
+};
+
+static int gta02_vib_init_hw(struct gta02_vib_priv *vp)
+{
+	int rc;
+
+	rc = s3c2410_pwm_init(&vp->pwm);
+	if (rc)
+		return rc;
+
+	vp->pwm.timerid = PWM3;
+	/* use same prescaler as arch/arm/plat-s3c24xx/time.c */
+	vp->pwm.prescaler = (6 - 1) / 2;
+	vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2;
+	vp->pwm.counter = COUNTER;
+	vp->pwm.comparer = COUNTER;
+
+	rc = s3c2410_pwm_enable(&vp->pwm);
+	if (rc)
+		return rc;
+
+	s3c2410_pwm_start(&vp->pwm);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gta02_vib_suspend(struct platform_device *dev, pm_message_t state)
+{
+	led_classdev_suspend(&gta02_vib_led.cdev);
+	if (gta02_vib_priv.pdata)
+		gta02_vib_priv.pdata->disable_fiq();
+	return 0;
+}
+
+static int gta02_vib_resume(struct platform_device *dev)
+{
+	struct gta02_vib_priv *vp = platform_get_drvdata(dev);
+
+	if (vp->has_pwm)
+		gta02_vib_init_hw(vp);
+
+	led_classdev_resume(&gta02_vib_led.cdev);
+	if (gta02_vib_priv.pdata)
+		gta02_vib_priv.pdata->enable_fiq();
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static int __init gta02_vib_probe(struct platform_device *pdev)
+{
+	struct resource *r;
+
+	r = platform_get_resource(pdev, 0, 0);
+	if (!r || !r->start)
+		return -EIO;
+
+	gta02_vib_led.gpio = r->start;
+
+	gta02_vib_priv.pdata = pdev->dev.platform_data;
+	platform_set_drvdata(pdev, &gta02_vib_led);
+
+    gta02_gpb_setpin(gta02_vib_led.gpio, 0); /* off */
+    s3c2410_gpio_cfgpin(gta02_vib_led.gpio, S3C2410_GPIO_OUTPUT);
+    /* safe, kmalloc'd copy needed for FIQ ISR */
+    gta02_vib_priv.vib_gpio_pin = gta02_vib_led.gpio;
+    gta02_vib_priv.vib_pwm = 0; /* off */
+	spin_lock_init(&gta02_vib_led.lock);
+
+	return led_classdev_register(&pdev->dev, &gta02_vib_led.cdev);
+}
+
+static int gta02_vib_remove(struct platform_device *pdev)
+{
+    gta02_vib_priv.vib_pwm = 0; /* off */
+	/* would only need kick if already off so no kick needed */
+
+	if (gta02_vib_led.has_pwm)
+		s3c2410_pwm_disable(&gta02_vib_led.pwm);
+
+	led_classdev_unregister(&gta02_vib_led.cdev);
+
+	return 0;
+}
+
+static struct platform_driver gta02_vib_driver = {
+	.probe		= gta02_vib_probe,
+	.remove		= gta02_vib_remove,
+#ifdef CONFIG_PM
+	.suspend	= gta02_vib_suspend,
+	.resume		= gta02_vib_resume,
+#endif
+	.driver		= {
+		.name		= "gta02-vibrator",
+	},
+};
+
+static int __init gta02_vib_init(void)
+{
+	return platform_driver_register(&gta02_vib_driver);
+}
+
+static void __exit gta02_vib_exit(void)
+{
+	platform_driver_unregister(&gta02_vib_driver);
+}
+
+module_init(gta02_vib_init);
+module_exit(gta02_vib_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner vibrator driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02.c b/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02.c
new file mode 100644
index 0000000..1d65eea
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/leds/leds-gta02.c
@@ -0,0 +1,179 @@
+/*
+ * LED driver for the Openmoko GTA02 GSM phone
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/gta02.h>
+#include <plat/regs-timer.h>
+#include <linux/gta02-shadow.h>
+
+#define MAX_LEDS 3
+#define COUNTER 256
+
+struct gta02_led_priv
+{
+	spinlock_t lock;
+	struct led_classdev cdev;
+	unsigned int gpio;
+};
+
+struct gta02_led_bundle
+{
+	int num_leds;
+	struct gta02_led_priv led[MAX_LEDS];
+};
+
+static inline struct gta02_led_priv *to_priv(struct led_classdev *led_cdev)
+{
+	return container_of(led_cdev, struct gta02_led_priv, cdev);
+}
+
+static inline struct gta02_led_bundle *to_bundle(struct led_classdev *led_cdev)
+{
+	return dev_get_drvdata(led_cdev->dev->parent);
+}
+
+static void gta02led_set(struct led_classdev *led_cdev,
+			 enum led_brightness value)
+{
+	unsigned long flags;
+	struct gta02_led_priv *lp = to_priv(led_cdev);
+
+	spin_lock_irqsave(&lp->lock, flags);
+	gta02_gpb_setpin(lp->gpio, value ? 1 : 0);
+	spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+static int gta02led_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < bundle->num_leds; i++)
+		led_classdev_suspend(&bundle->led[i].cdev);
+
+	return 0;
+}
+
+static int gta02led_resume(struct platform_device *pdev)
+{
+	struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < bundle->num_leds; i++)
+		led_classdev_resume(&bundle->led[i].cdev);
+
+	return 0;
+}
+#endif
+
+static int __init gta02led_probe(struct platform_device *pdev)
+{
+	int i, rc;
+	struct gta02_led_bundle *bundle;
+
+	if (!machine_is_neo1973_gta02())
+		return -EIO;
+
+	bundle = kzalloc(sizeof(struct gta02_led_bundle), GFP_KERNEL);
+	if (!bundle)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, bundle);
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		struct gta02_led_priv *lp;
+		struct resource *r;
+
+		if (i >= MAX_LEDS)
+			break;
+
+		r = platform_get_resource(pdev, 0, i);
+		if (!r || !r->start || !r->name)
+			continue;
+
+		lp = &bundle->led[i];
+
+		lp->gpio = r->start;
+		lp->cdev.name = r->name;
+		lp->cdev.brightness_set = gta02led_set;
+
+		switch (lp->gpio) {
+		case S3C2410_GPB0:
+		case S3C2410_GPB1:
+		case S3C2410_GPB2:
+			s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPIO_OUTPUT);
+			gta02_gpb_add_shadow_gpio(lp->gpio);
+			break;
+		default:
+			break;
+		}
+
+		spin_lock_init(&lp->lock);
+		rc = led_classdev_register(&pdev->dev, &lp->cdev);
+	}
+
+	bundle->num_leds = i;
+
+	return 0;
+}
+
+static int gta02led_remove(struct platform_device *pdev)
+{
+	struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < bundle->num_leds; i++) {
+		struct gta02_led_priv *lp = &bundle->led[i];
+		gta02led_set(&lp->cdev, 0);
+		led_classdev_unregister(&lp->cdev);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(bundle);
+
+	return 0;
+}
+
+static struct platform_driver gta02led_driver = {
+	.probe		= gta02led_probe,
+	.remove		= gta02led_remove,
+#ifdef CONFIG_PM
+	.suspend	= gta02led_suspend,
+	.resume		= gta02led_resume,
+#endif
+	.driver		= {
+		.name		= "gta02-led",
+	},
+};
+
+static int __init gta02led_init(void)
+{
+	return platform_driver_register(&gta02led_driver);
+}
+
+static void __exit gta02led_exit(void)
+{
+	platform_driver_unregister(&gta02led_driver);
+}
+
+module_init(gta02led_init);
+module_exit(gta02led_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko GTA02 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
new file mode 100644
index 0000000..efa1699
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
@@ -0,0 +1,59 @@
+config MFD_GLAMO
+	bool "Smedia Glamo 336x/337x support"
+	help
+	  This enables the core driver for the Smedia Glamo 336x/337x
+	  multi-function device.  It includes irq_chip demultiplex as
+	  well as clock / power management and GPIO support.
+
+config MFD_GLAMO_FB
+	tristate "Smedia Glamo 336x/337x framebuffer support"
+	depends on FB && MFD_GLAMO
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Frame buffer driver for the LCD controller in the Smedia Glamo
+	  336x/337x.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called glamofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config MFD_GLAMO_FB_XGLAMO_WORKAROUND
+	bool "Smedia Glamo 336x/337x Xglamo rotation workaround"
+	depends on MFD_GLAMO_FB
+	help
+	  This is a workaround for a Xglamo bug. This should be fixed
+	  in Xglamo and not in kernel space.
+
+	  If unsure, say N.
+
+
+config MFD_GLAMO_SPI_GPIO
+	tristate "Glamo GPIO SPI bitbang support"
+	depends on MFD_GLAMO
+	select SPI_BITBANG
+
+	help
+          Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+
+config MFD_GLAMO_SPI_FB
+	tristate "Glamo LCM control channel SPI support"
+	depends on MFD_GLAMO_FB
+	help
+	  Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM
+	  control channel.  This SPI interface is frequently used to
+	  interconnect the LCM control interface.
+
+config MFD_GLAMO_MCI
+	tristate "Glamo S3C SD/MMC Card Interface support"
+	depends on MFD_GLAMO && MMC
+	help
+	  This selects a driver for the MCI interface found in
+	  the S-Media GLAMO chip, as used in Openmoko
+	  neo1973 GTA-02.
+
+	  If unsure, say N.
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
new file mode 100644
index 0000000..dc64d50
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Smedia Glamo framebuffer driver
+#
+
+obj-$(CONFIG_MFD_GLAMO)			+= glamo-core.o glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO_SPI)		+= glamo-spi.o
+obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) 	+= glamo-spi-gpio.o
+
+obj-$(CONFIG_MFD_GLAMO_FB)		+= glamo-fb.o
+obj-$(CONFIG_MFD_GLAMO_SPI_FB)		+= glamo-lcm-spi.o
+obj-$(CONFIG_MFD_GLAMO_MCI)		+= glamo-mci.o
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
new file mode 100644
index 0000000..a2332a7
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
@@ -0,0 +1,1455 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/glamofb.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+
+//#include <mach/regs-irq.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+#define GLAMO_MEM_REFRESH_COUNT 0x100
+
+
+/*
+ * Glamo internal settings
+ *
+ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
+ * above.  Couple of GTA02 users report trouble with memory bus when they
+ * upgraded from 2.6.24.  So this parameter allows reversion to 2.6.24
+ * scheme if their Glamo chip needs it.
+ *
+ * you can override the faster default on kernel commandline using
+ *
+ *   glamo3362.slow_memory=1
+ *
+ * for example
+ */
+
+static int slow_memory = 0;
+module_param(slow_memory, int, 0644);
+
+struct reg_range {
+	int start;
+	int count;
+	char *name;
+	char dump;
+};
+struct reg_range reg_range[] = {
+	{ 0x0000, 0x76,		"General",	1 },
+	{ 0x0200, 0x16,		"Host Bus",	1 },
+	{ 0x0300, 0x38,		"Memory",	1 },
+/*	{ 0x0400, 0x100,	"Sensor",	0 }, */
+/*		{ 0x0500, 0x300,	"ISP",		0 }, */
+/*		{ 0x0800, 0x400,	"JPEG",		0 }, */
+/*		{ 0x0c00, 0xcc,		"MPEG",		0 }, */
+	{ 0x1100, 0xb2,		"LCD 1",	1 },
+	{ 0x1200, 0x64,		"LCD 2",	1 },
+	{ 0x1400, 0x40,		"MMC",		1 },
+/*		{ 0x1500, 0x080,	"MPU 0",	0 },
+	{ 0x1580, 0x080,	"MPU 1",	0 },
+	{ 0x1600, 0x080,	"Cmd Queue",	0 },
+	{ 0x1680, 0x080,	"RISC CPU",	0 },
+	{ 0x1700, 0x400,	"2D Unit",	0 },
+	{ 0x1b00, 0x900,	"3D Unit",	0 }, */
+};
+
+static struct glamo_core *glamo_handle;
+
+static inline void __reg_write(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t val)
+{
+	writew(val, glamo->base + reg);
+}
+
+static inline u_int16_t __reg_read(struct glamo_core *glamo,
+				   u_int16_t reg)
+{
+	return readw(glamo->base + reg);
+}
+
+static void __reg_set_bit_mask(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t mask,
+				u_int16_t val)
+{
+	u_int16_t tmp;
+
+	val &= mask;
+
+	tmp = __reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	__reg_write(glamo, reg, tmp);
+}
+
+static void reg_set_bit_mask(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t mask,
+				u_int16_t val)
+{
+	spin_lock(&glamo->lock);
+	__reg_set_bit_mask(glamo, reg, mask, val);
+	spin_unlock(&glamo->lock);
+}
+
+static inline void __reg_set_bit(struct glamo_core *glamo,
+				 u_int16_t reg, u_int16_t bit)
+{
+	__reg_set_bit_mask(glamo, reg, bit, 0xffff);
+}
+
+static inline void __reg_clear_bit(struct glamo_core *glamo,
+				   u_int16_t reg, u_int16_t bit)
+{
+	__reg_set_bit_mask(glamo, reg, bit, 0);
+}
+
+static inline void glamo_vmem_write(struct glamo_core *glamo, u_int32_t addr,
+				    u_int16_t *src, int len)
+{
+	if (addr & 0x0001 || (unsigned long)src & 0x0001 || len & 0x0001) {
+		dev_err(&glamo->pdev->dev, "unaligned write(0x%08x, 0x%p, "
+			"0x%x)!!\n", addr, src, len);
+	}
+
+}
+
+static inline void glamo_vmem_read(struct glamo_core *glamo, u_int16_t *buf,
+				   u_int32_t addr, int len)
+{
+	if (addr & 0x0001 || (unsigned long) buf & 0x0001 || len & 0x0001) {
+		dev_err(&glamo->pdev->dev, "unaligned read(0x%p, 0x08%x, "
+			"0x%x)!!\n", buf, addr, len);
+	}
+
+
+}
+
+/***********************************************************************
+ * resources of sibling devices
+ ***********************************************************************/
+
+#if 0
+static struct resource glamo_core_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_GENERIC,
+		.end	= GLAMO_REGOFS_GENERIC + 0x400,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_core_dev = {
+	.name		= "glamo-core",
+	.resource	= &glamo_core_resources,
+	.num_resources	= ARRAY_SIZE(glamo_core_resources),
+};
+#endif
+
+static struct resource glamo_jpeg_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_JPEG,
+		.end	= GLAMO_REGOFS_MPEG - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_JPEG,
+		.end	= IRQ_GLAMO_JPEG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_jpeg_dev = {
+	.name		= "glamo-jpeg",
+	.resource	= glamo_jpeg_resources,
+	.num_resources	= ARRAY_SIZE(glamo_jpeg_resources),
+};
+
+static struct resource glamo_mpeg_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_MPEG,
+		.end	= GLAMO_REGOFS_LCD - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_MPEG,
+		.end	= IRQ_GLAMO_MPEG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_mpeg_dev = {
+	.name		= "glamo-mpeg",
+	.resource	= glamo_mpeg_resources,
+	.num_resources	= ARRAY_SIZE(glamo_mpeg_resources),
+};
+
+static struct resource glamo_2d_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_2D,
+		.end	= GLAMO_REGOFS_3D - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_2D,
+		.end	= IRQ_GLAMO_2D,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_2d_dev = {
+	.name		= "glamo-2d",
+	.resource	= glamo_2d_resources,
+	.num_resources	= ARRAY_SIZE(glamo_2d_resources),
+};
+
+static struct resource glamo_3d_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_3D,
+		.end	= GLAMO_REGOFS_END - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device glamo_3d_dev = {
+	.name		= "glamo-3d",
+	.resource	= glamo_3d_resources,
+	.num_resources	= ARRAY_SIZE(glamo_3d_resources),
+};
+
+static struct platform_device glamo_spigpio_dev = {
+	.name		= "glamo-spi-gpio",
+};
+
+static struct resource glamo_fb_resources[] = {
+	/* FIXME: those need to be incremented by parent base */
+	{
+		.name	= "glamo-fb-regs",
+		.start	= GLAMO_REGOFS_LCD,
+		.end	= GLAMO_REGOFS_MMC - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "glamo-fb-mem",
+		.start	= GLAMO_OFFSET_FB,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device glamo_fb_dev = {
+	.name		= "glamo-fb",
+	.resource	= glamo_fb_resources,
+	.num_resources	= ARRAY_SIZE(glamo_fb_resources),
+};
+
+static struct resource glamo_mmc_resources[] = {
+	{
+		/* FIXME: those need to be incremented by parent base */
+		.start	= GLAMO_REGOFS_MMC,
+		.end	= GLAMO_REGOFS_MPROC0 - 1,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= IRQ_GLAMO_MMC,
+		.end	= IRQ_GLAMO_MMC,
+		.flags	= IORESOURCE_IRQ,
+	}, { /* our data buffer for MMC transfers */
+		.start	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
+				  GLAMO_MMC_BUFFER_SIZE - 1,
+		.flags	= IORESOURCE_MEM
+	},
+};
+
+struct glamo_mci_pdata glamo_mci_def_pdata = {
+	.gpio_detect		= 0,
+	.glamo_can_set_mci_power	= NULL, /* filled in from MFD platform data */
+	.ocr_avail	= MMC_VDD_20_21 |
+			  MMC_VDD_21_22 |
+			  MMC_VDD_22_23 |
+			  MMC_VDD_23_24 |
+			  MMC_VDD_24_25 |
+			  MMC_VDD_25_26 |
+			  MMC_VDD_26_27 |
+			  MMC_VDD_27_28 |
+			  MMC_VDD_28_29 |
+			  MMC_VDD_29_30 |
+			  MMC_VDD_30_31 |
+			  MMC_VDD_32_33,
+	.glamo_irq_is_wired	= NULL, /* filled in from MFD platform data */
+	.mci_suspending = NULL, /* filled in from MFD platform data */
+	.mci_all_dependencies_resumed = NULL, /* filled in from MFD platform data */
+};
+EXPORT_SYMBOL_GPL(glamo_mci_def_pdata);
+
+
+
+static void mangle_mem_resources(struct resource *res, int num_res,
+				 struct resource *parent)
+{
+	int i;
+
+	for (i = 0; i < num_res; i++) {
+		if (res[i].flags != IORESOURCE_MEM)
+			continue;
+		res[i].start += parent->start;
+		res[i].end += parent->start;
+		res[i].parent = parent;
+	}
+}
+
+/***********************************************************************
+ * IRQ demultiplexer
+ ***********************************************************************/
+#define irq2glamo(x)	(x - IRQ_GLAMO(0))
+
+static void glamo_ack_irq(unsigned int irq)
+{
+	/* clear interrupt source */
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_CLEAR,
+		    1 << irq2glamo(irq));
+}
+
+static void glamo_mask_irq(unsigned int irq)
+{
+	u_int16_t tmp;
+
+	/* clear bit in enable register */
+	tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
+	tmp &= ~(1 << irq2glamo(irq));
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
+}
+
+static void glamo_unmask_irq(unsigned int irq)
+{
+	u_int16_t tmp;
+
+	/* set bit in enable register */
+	tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
+	tmp |= (1 << irq2glamo(irq));
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
+}
+
+static struct irq_chip glamo_irq_chip = {
+	.ack	= glamo_ack_irq,
+	.mask	= glamo_mask_irq,
+	.unmask	= glamo_unmask_irq,
+};
+
+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+	if (unlikely(desc->status & IRQ_INPROGRESS)) {
+		desc->status |= (IRQ_PENDING | IRQ_MASKED);
+		desc->chip->mask(irq);
+		desc->chip->ack(irq);
+		return;
+	}
+    kstat_incr_irqs_this_cpu(irq, desc);
+
+	desc->chip->ack(irq);
+	desc->status |= IRQ_INPROGRESS;
+
+	do {
+		u_int16_t irqstatus;
+		int i;
+
+		if (unlikely((desc->status &
+				(IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
+				(IRQ_PENDING | IRQ_MASKED))) {
+			/* dealing with pending IRQ, unmasking */
+			desc->chip->unmask(irq);
+			desc->status &= ~IRQ_MASKED;
+		}
+
+		desc->status &= ~IRQ_PENDING;
+
+		/* read IRQ status register */
+		irqstatus = __reg_read(glamo_handle, GLAMO_REG_IRQ_STATUS);
+		for (i = 0; i < 9; i++)
+			if (irqstatus & (1 << i))
+				desc_handle_irq(IRQ_GLAMO(i),
+				    irq_desc+IRQ_GLAMO(i));
+
+	} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+	desc->status &= ~IRQ_INPROGRESS;
+}
+
+
+static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	unsigned long reg = simple_strtoul(buf, NULL, 10);
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+
+	while (*buf && (*buf != ' '))
+		buf++;
+	if (*buf != ' ')
+		return -EINVAL;
+	while (*buf && (*buf == ' '))
+		buf++;
+	if (!*buf)
+		return -EINVAL;
+
+	printk(KERN_INFO"reg 0x%02lX <-- 0x%04lX\n",
+	       reg, simple_strtoul(buf, NULL, 10));
+
+	__reg_write(glamo, reg, simple_strtoul(buf, NULL, 10));
+
+	return count;
+}
+
+static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+	int n, n1 = 0, r;
+	char * end = buf;
+
+	spin_lock(&glamo->lock);
+
+	for (r = 0; r < ARRAY_SIZE(reg_range); r++) {
+		if (!reg_range[r].dump)
+			continue;
+		n1 = 0;
+		end += sprintf(end, "\n%s\n", reg_range[r].name);
+		for (n = reg_range[r].start;
+		     n < reg_range[r].start + reg_range[r].count; n += 2) {
+			if (((n1++) & 7) == 0)
+				end += sprintf(end, "\n%04X:  ", n);
+			end += sprintf(end, "%04x ", __reg_read(glamo, n));
+		}
+		end += sprintf(end, "\n");
+		if (!attr) {
+			printk("%s", buf);
+			end = buf;
+		}
+	}
+	spin_unlock(&glamo->lock);
+
+	return end - buf;
+}
+
+static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
+static struct attribute *glamo_sysfs_entries[] = {
+	&dev_attr_regs.attr,
+	NULL
+};
+static struct attribute_group glamo_attr_group = {
+	.name	= NULL,
+	.attrs	= glamo_sysfs_entries,
+};
+
+
+
+/***********************************************************************
+ * 'engine' support
+ ***********************************************************************/
+
+int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_LCD,
+				   GLAMO_HOSTBUS2_MMIO_EN_LCD);
+		__reg_write(glamo, GLAMO_REG_CLOCK_LCD,
+			    GLAMO_CLOCK_LCD_EN_M5CLK |
+			    GLAMO_CLOCK_LCD_EN_DHCLK |
+			    GLAMO_CLOCK_LCD_EN_DMCLK |
+			    GLAMO_CLOCK_LCD_EN_DCLK |
+			    GLAMO_CLOCK_LCD_DG_M5CLK |
+			    GLAMO_CLOCK_LCD_DG_DMCLK);
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
+			    GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0xffff);
+		break;
+	case GLAMO_ENGINE_MMC:
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_MMC,
+				   GLAMO_HOSTBUS2_MMIO_EN_MMC);
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
+				   GLAMO_CLOCK_MMC_EN_M9CLK |
+				   GLAMO_CLOCK_MMC_EN_TCLK |
+				   GLAMO_CLOCK_MMC_DG_M9CLK |
+				   GLAMO_CLOCK_MMC_DG_TCLK, 0xffff);
+		/* enable the TCLK divider clk input */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
+						 GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
+						 GLAMO_CLOCK_GEN51_EN_DIV_TCLK);
+		break;
+	case GLAMO_ENGINE_2D:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
+				   GLAMO_CLOCK_2D_EN_M7CLK |
+				   GLAMO_CLOCK_2D_EN_GCLK |
+				   GLAMO_CLOCK_2D_DG_M7CLK |
+				   GLAMO_CLOCK_2D_DG_GCLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_2D,
+				   GLAMO_HOSTBUS2_MMIO_EN_2D);
+		break;
+	case GLAMO_ENGINE_CMDQ:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
+				   GLAMO_CLOCK_2D_EN_M6CLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_CQ,
+				   GLAMO_HOSTBUS2_MMIO_EN_CQ);
+		break;
+	/* FIXME: Implementation */
+	default:
+		break;
+	}
+
+	glamo->engine_enabled_bitfield |= 1 << engine;
+
+	return 0;
+}
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int ret;
+
+	spin_lock(&glamo->lock);
+
+	ret = __glamo_engine_enable(glamo, engine);
+
+	spin_unlock(&glamo->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_enable);
+
+int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		/* remove pixel clock to LCM */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
+			    GLAMO_CLOCK_LCD_EN_DCLK, 0);
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
+			    GLAMO_CLOCK_LCD_EN_DHCLK |
+			    GLAMO_CLOCK_LCD_EN_DMCLK, 0);
+		/* kill memory clock */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
+			    GLAMO_CLOCK_LCD_EN_M5CLK, 0);
+		/* stop dividing the clocks */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
+			    GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0);
+		break;
+
+	case GLAMO_ENGINE_MMC:
+//		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
+//						   GLAMO_CLOCK_MMC_EN_M9CLK |
+//						   GLAMO_CLOCK_MMC_EN_TCLK |
+//						   GLAMO_CLOCK_MMC_DG_M9CLK |
+//						   GLAMO_CLOCK_MMC_DG_TCLK, 0);
+		/* disable the TCLK divider clk input */
+//		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
+//					GLAMO_CLOCK_GEN51_EN_DIV_TCLK, 0);
+
+	default:
+		break;
+	}
+
+	glamo->engine_enabled_bitfield &= ~(1 << engine);
+
+	return 0;
+}
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int ret;
+
+	spin_lock(&glamo->lock);
+
+	ret = __glamo_engine_disable(glamo, engine);
+
+	spin_unlock(&glamo->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_disable);
+
+static const u_int16_t engine_clock_regs[__NUM_GLAMO_ENGINES] = {
+	[GLAMO_ENGINE_LCD]	= GLAMO_REG_CLOCK_LCD,
+	[GLAMO_ENGINE_MMC]	= GLAMO_REG_CLOCK_MMC,
+	[GLAMO_ENGINE_ISP]	= GLAMO_REG_CLOCK_ISP,
+	[GLAMO_ENGINE_JPEG]	= GLAMO_REG_CLOCK_JPEG,
+	[GLAMO_ENGINE_3D]	= GLAMO_REG_CLOCK_3D,
+	[GLAMO_ENGINE_2D]	= GLAMO_REG_CLOCK_2D,
+	[GLAMO_ENGINE_MPEG_ENC] = GLAMO_REG_CLOCK_MPEG,
+	[GLAMO_ENGINE_MPEG_DEC] = GLAMO_REG_CLOCK_MPEG,
+};
+
+void glamo_engine_clkreg_set(struct glamo_core *glamo,
+			     enum glamo_engine engine,
+			     u_int16_t mask, u_int16_t val)
+{
+	reg_set_bit_mask(glamo, engine_clock_regs[engine], mask, val);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_clkreg_set);
+
+u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
+				  enum glamo_engine engine)
+{
+	u_int16_t val;
+
+	spin_lock(&glamo->lock);
+	val = __reg_read(glamo, engine_clock_regs[engine]);
+	spin_unlock(&glamo->lock);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_clkreg_get);
+
+struct glamo_script reset_regs[] = {
+	[GLAMO_ENGINE_LCD] = {
+		GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
+	},
+#if 0
+	[GLAMO_ENGINE_HOST] = {
+		GLAMO_REG_CLOCK_HOST, GLAMO_CLOCK_HOST_RESET
+	},
+	[GLAMO_ENGINE_MEM] = {
+		GLAMO_REG_CLOCK_MEM, GLAMO_CLOCK_MEM_RESET
+	},
+#endif
+	[GLAMO_ENGINE_MMC] = {
+		GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
+	},
+	[GLAMO_ENGINE_2D] = {
+		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
+	},
+	[GLAMO_ENGINE_JPEG] = {
+		GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
+	},
+};
+
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	struct glamo_script *rst;
+
+	if (engine >= ARRAY_SIZE(reset_regs)) {
+		dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
+		return;
+	}
+
+	rst = &reset_regs[engine];
+
+	spin_lock(&glamo->lock);
+	__reg_set_bit(glamo, rst->reg, rst->val);
+	__reg_clear_bit(glamo, rst->reg, rst->val);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reset);
+
+void glamo_lcm_reset(int level)
+{
+	if (!glamo_handle)
+		return;
+
+	glamo_gpio_setpin(glamo_handle, GLAMO_GPIO4, level);
+	glamo_gpio_cfgpin(glamo_handle, GLAMO_GPIO4_OUTPUT);
+
+}
+EXPORT_SYMBOL_GPL(glamo_lcm_reset);
+
+enum glamo_pll {
+	GLAMO_PLL1,
+	GLAMO_PLL2,
+};
+
+static int glamo_pll_rate(struct glamo_core *glamo,
+			  enum glamo_pll pll)
+{
+	u_int16_t reg;
+	unsigned int div = 512;
+	/* FIXME: move osci into platform_data */
+	unsigned int osci = 32768;
+
+	if (osci == 32768)
+		div = 1;
+
+	switch (pll) {
+	case GLAMO_PLL1:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
+		break;
+	case GLAMO_PLL2:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return (osci/div)*reg;
+}
+
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine,
+			 int ps)
+{
+	int pll, khz;
+	u_int16_t reg, mask, val = 0;
+
+	if (!ps)
+		return 0;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		pll = GLAMO_PLL1;
+		reg = GLAMO_REG_CLOCK_GEN7;
+		mask = 0xff;
+		break;
+	default:
+		dev_warn(&glamo->pdev->dev,
+			 "reclock of engine 0x%x not supported\n", engine);
+		return -EINVAL;
+		break;
+	}
+
+	pll = glamo_pll_rate(glamo, pll);
+	khz = 1000000000UL / ps;
+
+	if (khz)
+		val = (pll / khz) / 1000;
+
+	dev_dbg(&glamo->pdev->dev,
+			"PLL %d, kHZ %d, div %d\n", pll, khz, val);
+
+	if (val) {
+		val--;
+		reg_set_bit_mask(glamo, reg, mask, val);
+		mdelay(5); /* wait some time to stabilize */
+
+		return 0;
+	} else {
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reclock);
+
+/***********************************************************************
+ * script support
+ ***********************************************************************/
+
+int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
+		     int len, int may_sleep)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		struct glamo_script *line = &script[i];
+
+		switch (line->reg) {
+		case 0xffff:
+			return 0;
+		case 0xfffe:
+			if (may_sleep)
+				msleep(line->val);
+			else
+				mdelay(line->val * 4);
+			break;
+		case 0xfffd:
+			/* spin until PLLs lock */
+			while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
+				;
+			break;
+
+		/*
+		 * couple of people reported artefacts with 2.6.28 changes, this
+		 * allows reversion to 2.6.24 settings
+		 */
+
+		case 0x200:
+			switch (slow_memory) {
+			/* choice 1 is the most conservative */
+			case 1: /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xef0);
+				break;
+			case 2: /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xea0);
+				break;
+			case 3: /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xe50);
+				break;
+			case 4: /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xe00);
+				break;
+
+			/* using PLL2 for memory bus increases CPU bandwidth significantly */
+			case 5: /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xef3);
+				break;
+			case 6: /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xea3);
+				break;
+			case 7: /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xe53);
+				break;
+			/* default of 0 or >7 is fastest */
+			default: /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
+				__reg_write(glamo, script[i].reg, 0xe03);
+				break;
+			}
+			break;
+
+		default:
+			__reg_write(glamo, script[i].reg, script[i].val);
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(glamo_run_script);
+
+static struct glamo_script glamo_init_script[] = {
+	{ GLAMO_REG_CLOCK_HOST,		0x1000 },
+		{ 0xfffe, 2 },
+	{ GLAMO_REG_CLOCK_MEMORY, 	0x1000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x2000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x1000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x3000 },
+	{ GLAMO_REG_CLOCK_JPEG,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x3000 },
+	{ GLAMO_REG_CLOCK_2D,		0x1000 },
+	{ GLAMO_REG_CLOCK_2D,		0x3000 },
+	{ GLAMO_REG_CLOCK_RISC1,	0x1000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
+	{ GLAMO_REG_CLOCK_MPROC,	0x1000 /*0x100f*/ },
+		{ 0xfffe, 2 },
+	{ GLAMO_REG_CLOCK_HOST,		0x0000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x0000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x0000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x0000 },
+#if 0
+/* unused engines must be left in reset to stop MMC block read "blackouts" */
+	{ GLAMO_REG_CLOCK_ISP,		0x0000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x0000 },
+	{ GLAMO_REG_CLOCK_JPEG,		0x0000 },
+	{ GLAMO_REG_CLOCK_3D,		0x0000 },
+	{ GLAMO_REG_CLOCK_3D,		0x0000 },
+	{ GLAMO_REG_CLOCK_2D,		0x0000 },
+	{ GLAMO_REG_CLOCK_2D,		0x0000 },
+	{ GLAMO_REG_CLOCK_RISC1,	0x0000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x0000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x0000 },
+#endif
+	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
+	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
+	{ 0xfffd, 0 },
+	/*
+	 * b9 of this register MUST be zero to get any interrupts on INT#
+	 * the other set bits enable all the engine interrupt sources
+	 */
+	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
+	{ GLAMO_REG_CLOCK_GEN7,		0x0101 },
+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
+	/*
+	 * b7..b4 = 0 = no wait states on read or write
+	 * b0 = 1 select PLL2 for Host interface, b1 = enable it
+	 */
+	{ 0x200,	0x0e03 /* this is replaced by script parser */ },
+	{ 0x202, 	0x07ff },
+	{ 0x212,	0x0000 },
+	{ 0x214,	0x4000 },
+	{ 0x216,	0xf00e },
+
+	/* S-Media recommended "set tiling mode to 512 mode for memory access
+	 * more efficiency when 640x480" */
+	{ GLAMO_REG_MEM_TYPE,		0x0c74 }, /* 8MB, 16 word pg wr+rd */
+	{ GLAMO_REG_MEM_GEN,		0xafaf }, /* 63 grants min + max */
+
+	{ GLAMO_REGOFS_HOSTBUS + 2,	0xffff }, /* enable  on MMIO*/
+
+	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 }, /* Taa = 3 MCLK */
+	{ GLAMO_REG_MEM_TIMING3,	0x0000 },
+	{ GLAMO_REG_MEM_TIMING4,	0x0000 }, /* CE1# delay fall/rise */
+	{ GLAMO_REG_MEM_TIMING5,	0x0000 }, /* UB# LB# */
+	{ GLAMO_REG_MEM_TIMING6,	0x0000 }, /* OE# */
+	{ GLAMO_REG_MEM_TIMING7,	0x0000 }, /* WE# */
+	{ GLAMO_REG_MEM_TIMING8,	0x1002 }, /* MCLK delay, was 0x1000 */
+	{ GLAMO_REG_MEM_TIMING9,	0x6006 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0001 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ GLAMO_REG_MEM_POWER2,		0x0000 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+	{ GLAMO_REG_GPIO_GEN1,		0x000f },
+	{ GLAMO_REG_GPIO_GEN2,		0x111e },
+	{ GLAMO_REG_GPIO_GEN3,		0xccc3 },
+	{ GLAMO_REG_GPIO_GEN4,		0x111e },
+	{ GLAMO_REG_GPIO_GEN5,		0x000f },
+};
+#if 0
+static struct glamo_script glamo_resume_script[] = {
+
+	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
+	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
+	{ GLAMO_REG_DFT_GEN6, 1 },
+		{ 0xfffe, 100 },
+		{ 0xfffd, 0 },
+	{ 0x200,	0x0e03 },
+
+	/*
+	 * b9 of this register MUST be zero to get any interrupts on INT#
+	 * the other set bits enable all the engine interrupt sources
+	 */
+	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
+	{ GLAMO_REG_CLOCK_HOST,		0x0018 },
+	{ GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
+
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+};
+#endif
+
+enum glamo_power {
+	GLAMO_POWER_ON,
+	GLAMO_POWER_SUSPEND,
+};
+
+static void glamo_power(struct glamo_core *glamo,
+			enum glamo_power new_state)
+{
+	int n;
+	unsigned long flags;
+	
+	spin_lock_irqsave(&glamo->lock, flags);
+
+	dev_info(&glamo->pdev->dev, "***** glamo_power -> %d\n", new_state);
+
+	/*
+Power management
+static const REG_VALUE_MASK_TYPE reg_powerOn[] =
+{
+    { REG_GEN_DFT6,     REG_BIT_ALL,    REG_DATA(1u << 0)           },
+    { REG_GEN_PLL3,     0u,             REG_DATA(1u << 13)          },
+    { REG_GEN_MEM_CLK,  REG_BIT_ALL,    REG_BIT_EN_MOCACLK          },
+    { REG_MEM_DRAM2,    0u,             REG_BIT_EN_DEEP_POWER_DOWN  },
+    { REG_MEM_DRAM1,    0u,             REG_BIT_SELF_REFRESH        }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
+{
+    { REG_MEM_DRAM1,    REG_BIT_ALL,    REG_BIT_SELF_REFRESH    },
+    { REG_GEN_MEM_CLK,  0u,             REG_BIT_EN_MOCACLK      },
+    { REG_GEN_PLL3,     REG_BIT_ALL,    REG_DATA(1u << 13)      },
+    { REG_GEN_DFT5,     REG_BIT_ALL,    REG_DATA(1u << 0)       }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
+{
+    { REG_MEM_DRAM2,    REG_BIT_ALL,    REG_BIT_EN_DEEP_POWER_DOWN  },
+    { REG_GEN_MEM_CLK,  0u,             REG_BIT_EN_MOCACLK          },
+    { REG_GEN_PLL3,     REG_BIT_ALL,    REG_DATA(1u << 13)          },
+    { REG_GEN_DFT5,     REG_BIT_ALL,    REG_DATA(1u << 0)           }
+};
+*/
+
+	switch (new_state) {
+	case GLAMO_POWER_ON:
+
+		/*
+		 * glamo state on resume is nondeterministic in some
+		 * fundamental way, it has also been observed that the
+		 * Glamo reset pin can get asserted by, eg, touching it with
+		 * a scope probe.  So the only answer is to roll with it and
+		 * force an external reset on the Glamo during resume.
+		 */
+
+		(glamo->pdata->glamo_external_reset)(0);
+		udelay(10);
+		(glamo->pdata->glamo_external_reset)(1);
+		mdelay(5);
+
+		glamo_run_script(glamo, glamo_init_script,
+			 ARRAY_SIZE(glamo_init_script), 0);
+
+		break;
+
+	case GLAMO_POWER_SUSPEND:
+
+		/* nuke interrupts */
+		__reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
+
+		/* stash a copy of which engines were running */
+		glamo->engine_enabled_bitfield_suspend =
+						 glamo->engine_enabled_bitfield;
+
+		/* take down each engine before we kill mem and pll */
+		for (n = 0; n < __NUM_GLAMO_ENGINES; n++)
+			if (glamo->engine_enabled_bitfield & (1 << n))
+				__glamo_engine_disable(glamo, n);
+
+		/* enable self-refresh */
+
+		__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+					GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+					GLAMO_MEM_DRAM1_EN_GATE_CKE |
+					GLAMO_MEM_DRAM1_SELF_REFRESH |
+					GLAMO_MEM_REFRESH_COUNT);
+		__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+					GLAMO_MEM_DRAM1_EN_MODEREG_SET |
+					GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+					GLAMO_MEM_DRAM1_EN_GATE_CKE |
+					GLAMO_MEM_DRAM1_SELF_REFRESH |
+					GLAMO_MEM_REFRESH_COUNT);
+
+		/* force RAM into deep powerdown */
+
+		__reg_write(glamo, GLAMO_REG_MEM_DRAM2,
+					GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
+					(7 << 6) | /* tRC */
+					(1 << 4) | /* tRP */
+					(1 << 2) | /* tRCD */
+					2); /* CAS latency */
+
+		/* disable clocks to memory */
+		__reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
+
+		/* all dividers from OSCI */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
+
+		/* PLL2 into bypass */
+		__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
+
+		__reg_write(glamo, 0x200, 0x0e00);
+
+
+		/* kill PLLS 1 then 2 */
+		__reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
+		__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
+
+		break;
+	}
+
+	spin_unlock_irqrestore(&glamo->lock, flags);
+}
+
+#if 0
+#define MEMDETECT_RETRY	6
+static unsigned int detect_memsize(struct glamo_core *glamo)
+{
+	int i;
+
+	/*static const u_int16_t pattern[] = {
+		0x1111, 0x8a8a, 0x2222, 0x7a7a,
+		0x3333, 0x6a6a, 0x4444, 0x5a5a,
+		0x5555, 0x4a4a, 0x6666, 0x3a3a,
+		0x7777, 0x2a2a, 0x8888, 0x1a1a
+	}; */
+
+	for (i = 0; i < MEMDETECT_RETRY; i++) {
+		switch (glamo->type) {
+		case 3600:
+			__reg_write(glamo, GLAMO_REG_MEM_TYPE, 0x0072);
+			__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
+			break;
+		case 3650:
+			switch (glamo->revision) {
+			case GLAMO_CORE_REV_A0:
+				if (i & 1)
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x097a);
+				else
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0173);
+
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
+				msleep(1);
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
+				break;
+			default:
+				if (i & 1)
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0972);
+				else
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0872);
+
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
+				msleep(1);
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xe100);
+				break;
+			}
+			break;
+		case 3700:
+			/* FIXME */
+		default:
+			break;
+		}
+
+#if 0
+		/* FIXME: finish implementation */
+		for (j = 0; j < 8; j++) {
+			__
+#endif
+	}
+
+	return 0;
+}
+#endif
+
+/* Find out if we can support this version of the Glamo chip */
+static int glamo_supported(struct glamo_core *glamo)
+{
+	u_int16_t dev_id, rev_id; /*, memsize; */
+
+	dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
+	rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
+
+	switch (dev_id) {
+	case 0x3650:
+		switch (rev_id) {
+		case GLAMO_CORE_REV_A2:
+			break;
+		case GLAMO_CORE_REV_A0:
+		case GLAMO_CORE_REV_A1:
+		case GLAMO_CORE_REV_A3:
+			dev_warn(&glamo->pdev->dev, "untested core revision "
+				 "%04x, your mileage may vary\n", rev_id);
+			break;
+		default:
+			dev_warn(&glamo->pdev->dev, "unknown glamo revision "
+				 "%04x, your mileage may vary\n", rev_id);
+			/* maybe should abort ? */
+		}
+		break;
+	case 0x3600:
+	case 0x3700:
+	default:
+		dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
+			dev_id);
+		return 0;
+	}
+
+	dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
+		 "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	return 1;
+}
+
+static int __init glamo_probe(struct platform_device *pdev)
+{
+	int rc = 0, irq;
+	struct glamo_core *glamo;
+	struct platform_device *glamo_mmc_dev;
+
+	if (glamo_handle) {
+		dev_err(&pdev->dev,
+			"This driver supports only one instance\n");
+		return -EBUSY;
+	}
+
+	glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
+	if (!glamo)
+		return -ENOMEM;
+
+	spin_lock_init(&glamo->lock);
+	glamo_handle = glamo;
+	glamo->pdev = pdev;
+	glamo->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	glamo->irq = platform_get_irq(pdev, 0);
+	glamo->pdata = pdev->dev.platform_data;
+	if (!glamo->mem || !glamo->pdata) {
+		dev_err(&pdev->dev, "platform device with no MEM/PDATA ?\n");
+		rc = -ENOENT;
+		goto bail_free;
+	}
+
+	/* register a number of sibling devices whoise IOMEM resources
+	 * are siblings of pdev's IOMEM resource */
+#if 0
+	glamo_core_dev.dev.parent = &pdev.dev;
+	mangle_mem_resources(glamo_core_dev.resources,
+			     glamo_core_dev.num_resources, glamo->mem);
+	glamo_core_dev.resources[1].start = glamo->irq;
+	glamo_core_dev.resources[1].end = glamo->irq;
+	platform_device_register(&glamo_core_dev);
+#endif
+	/* only remap the generic, hostbus and memory controller registers */
+	glamo->base = ioremap(glamo->mem->start, 0x4000 /*GLAMO_REGOFS_VIDCAP*/);
+	if (!glamo->base) {
+		dev_err(&pdev->dev, "failed to ioremap() memory region\n");
+		goto bail_free;
+	}
+
+	platform_set_drvdata(pdev, glamo);
+
+	(glamo->pdata->glamo_external_reset)(0);
+	udelay(10);
+	(glamo->pdata->glamo_external_reset)(1);
+	mdelay(10);
+
+	/*
+	 * finally set the mfd interrupts up
+	 * can't do them earlier or sibling probes blow up
+	 */
+
+	for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
+		set_irq_chip(irq, &glamo_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	if (glamo->pdata->glamo_irq_is_wired &&
+	    !glamo->pdata->glamo_irq_is_wired()) {
+		set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
+		set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
+		dev_info(&pdev->dev, "Glamo interrupt registered\n");
+		glamo->irq_works = 1;
+	} else {
+		dev_err(&pdev->dev, "Glamo interrupt not used\n");
+		glamo->irq_works = 0;
+	}
+
+
+	/* confirm it isn't insane version */
+	if (!glamo_supported(glamo)) {
+		dev_err(&pdev->dev, "This Glamo is not supported\n");
+		goto bail_irq;
+	}
+
+	/* sysfs */
+	rc = sysfs_create_group(&pdev->dev.kobj, &glamo_attr_group);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "cannot create sysfs group\n");
+		goto bail_irq;
+	}
+
+	/* init the chip with canned register set */
+
+	dev_dbg(&glamo->pdev->dev, "running init script\n");
+	glamo_run_script(glamo, glamo_init_script,
+			 ARRAY_SIZE(glamo_init_script), 1);
+
+	dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	/* bring MCI specific stuff over from our MFD platform data */
+	glamo_mci_def_pdata.glamo_can_set_mci_power =
+					glamo->pdata->glamo_can_set_mci_power;
+	glamo_mci_def_pdata.glamo_mci_use_slow =
+					glamo->pdata->glamo_mci_use_slow;
+	glamo_mci_def_pdata.glamo_irq_is_wired =
+					glamo->pdata->glamo_irq_is_wired;
+
+	/* start creating the siblings */
+
+	glamo_2d_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_2d_dev.resource,
+			     glamo_2d_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_2d_dev);
+
+	glamo_3d_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_3d_dev.resource,
+			     glamo_3d_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_3d_dev);
+
+	glamo_jpeg_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_jpeg_dev.resource,
+			     glamo_jpeg_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_jpeg_dev);
+
+	glamo_mpeg_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_mpeg_dev.resource,
+			     glamo_mpeg_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_mpeg_dev);
+
+	glamo->pdata->glamo = glamo;
+	glamo_fb_dev.dev.parent = &pdev->dev;
+	glamo_fb_dev.dev.platform_data = glamo->pdata;
+	mangle_mem_resources(glamo_fb_dev.resource,
+			     glamo_fb_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_fb_dev);
+
+	glamo->pdata->spigpio_info->glamo = glamo;
+	glamo_spigpio_dev.dev.parent = &pdev->dev;
+	glamo_spigpio_dev.dev.platform_data = glamo->pdata->spigpio_info;
+	platform_device_register(&glamo_spigpio_dev);
+
+	glamo_mmc_dev = glamo->pdata->mmc_dev;
+	glamo_mmc_dev->name = "glamo-mci";
+	glamo_mmc_dev->dev.parent = &pdev->dev;
+	glamo_mmc_dev->resource = glamo_mmc_resources;
+	glamo_mmc_dev->num_resources = ARRAY_SIZE(glamo_mmc_resources); 
+
+	/* we need it later to give to the engine enable and disable */
+	glamo_mci_def_pdata.pglamo = glamo;
+	mangle_mem_resources(glamo_mmc_dev->resource,
+			     glamo_mmc_dev->num_resources, glamo->mem);
+	platform_device_register(glamo_mmc_dev);
+
+	/* only request the generic, hostbus and memory controller MMIO */
+	glamo->mem = request_mem_region(glamo->mem->start,
+					GLAMO_REGOFS_VIDCAP, "glamo-core");
+	if (!glamo->mem) {
+		dev_err(&pdev->dev, "failed to request memory region\n");
+		goto bail_irq;
+	}
+
+	return 0;
+
+bail_irq:
+	disable_irq(glamo->irq);
+	set_irq_chained_handler(glamo->irq, NULL);
+
+	for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
+		set_irq_flags(irq, 0);
+		set_irq_chip(irq, NULL);
+	}
+
+	iounmap(glamo->base);
+bail_free:
+	platform_set_drvdata(pdev, NULL);
+	glamo_handle = NULL;
+	kfree(glamo);
+
+	return rc;
+}
+
+static int glamo_remove(struct platform_device *pdev)
+{
+	struct glamo_core *glamo = platform_get_drvdata(pdev);
+	int irq;
+
+	disable_irq(glamo->irq);
+	set_irq_chained_handler(glamo->irq, NULL);
+
+	for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
+		set_irq_flags(irq, 0);
+		set_irq_chip(irq, NULL);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+	platform_device_unregister(&glamo_fb_dev);
+	platform_device_unregister(glamo->pdata->mmc_dev);
+	iounmap(glamo->base);
+	release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
+	glamo_handle = NULL;
+	kfree(glamo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int glamo_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	glamo_handle->suspending = 1;
+	glamo_power(glamo_handle, GLAMO_POWER_SUSPEND);
+
+	return 0;
+}
+
+static int glamo_resume(struct platform_device *pdev)
+{
+	glamo_power(glamo_handle, GLAMO_POWER_ON);
+	glamo_handle->suspending = 0;
+
+	return 0;
+}
+
+#else
+#define glamo_suspend NULL
+#define glamo_resume  NULL
+#endif
+
+static struct platform_driver glamo_driver = {
+	.probe		= glamo_probe,
+	.remove		= glamo_remove,
+	.suspend	= glamo_suspend,
+	.resume	= glamo_resume,
+	.driver		= {
+		.name	= "glamo3362",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __devinit glamo_init(void)
+{
+	return platform_driver_register(&glamo_driver);
+}
+
+static void __exit glamo_cleanup(void)
+{
+	platform_driver_unregister(&glamo_driver);
+}
+
+module_init(glamo_init);
+module_exit(glamo_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h
new file mode 100644
index 0000000..8e09564
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h
@@ -0,0 +1,92 @@
+#ifndef __GLAMO_CORE_H
+#define __GLAMO_CORE_H
+
+#include <asm/system.h>
+
+/* for the time being, we put the on-screen framebuffer into the lowest
+ * VRAM space.  This should make the code easily compatible with the various
+ * 2MB/4MB/8MB variants of the Smedia chips */
+#define GLAMO_OFFSET_VRAM	0x800000
+#define GLAMO_OFFSET_FB	(GLAMO_OFFSET_VRAM)
+
+/* we only allocate the minimum possible size for the framebuffer to make
+ * sure we have sufficient memory for other functions of the chip */
+//#define GLAMO_FB_SIZE	(640*480*4)	/* == 0x12c000 */
+#define GLAMO_INTERNAL_RAM_SIZE 0x800000
+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
+#define GLAMO_FB_SIZE	(GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
+
+struct glamo_core {
+	int irq;
+	int irq_works; /* 0 means PCB does not support Glamo IRQ */
+	struct resource *mem;
+	struct resource *mem_core;
+	void __iomem *base;
+	struct platform_device *pdev;
+	struct glamofb_platform_data *pdata;
+	u_int16_t type;
+	u_int16_t revision;
+	spinlock_t lock;
+	u32 engine_enabled_bitfield;
+	u32 engine_enabled_bitfield_suspend;
+	int suspending;
+};
+
+struct glamo_script {
+	u_int16_t reg;
+	u_int16_t val;
+};
+
+int glamo_run_script(struct glamo_core *glamo,
+		     struct glamo_script *script, int len, int may_sleep);
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE,
+	GLAMO_ENGINE_ISP,
+	GLAMO_ENGINE_JPEG,
+	GLAMO_ENGINE_MPEG_ENC,
+	GLAMO_ENGINE_MPEG_DEC,
+	GLAMO_ENGINE_LCD,
+	GLAMO_ENGINE_CMDQ,
+	GLAMO_ENGINE_2D,
+	GLAMO_ENGINE_3D,
+	GLAMO_ENGINE_MMC,
+	GLAMO_ENGINE_MICROP0,
+	GLAMO_ENGINE_RISC,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC,
+#if 0
+	GLAMO_ENGINE_H264_DEC,
+	GLAMO_ENGINE_RISC1,
+	GLAMO_ENGINE_SPI,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+struct glamo_mci_pdata {
+	struct glamo_core * pglamo;
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	int		(*glamo_can_set_mci_power)(void);
+	/* glamo-mci asking if it should use the slow clock to card */
+	int		(*glamo_mci_use_slow)(void);
+	int		(*glamo_irq_is_wired)(void);
+	void		(*mci_suspending)(struct platform_device *dev);
+	int		(*mci_all_dependencies_resumed)(struct platform_device *dev);
+
+};
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine, int ps);
+
+void glamo_engine_clkreg_set(struct glamo_core *glamo,
+			     enum glamo_engine engine,
+			     u_int16_t mask, u_int16_t val);
+
+u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
+				  enum glamo_engine engine);
+#endif /* __GLAMO_CORE_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c
new file mode 100644
index 0000000..8d1a5ed
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c
@@ -0,0 +1,1084 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/glamofb.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#ifndef DEBUG
+#define GLAMO_LOG(...)
+#else
+#define GLAMO_LOG(...) \
+do { \
+	printk(KERN_DEBUG "in %s:%s:%d", __FILE__, __func__, __LINE__); \
+	printk(KERN_DEBUG __VA_ARGS__); \
+} while (0);
+#endif
+
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+struct glamofb_handle {
+	struct fb_info *fb;
+	struct device *dev;
+	struct resource *reg;
+	struct resource *fb_res;
+	char __iomem *base;
+	struct glamofb_platform_data *mach_info;
+	char __iomem *cursor_addr;
+	int cursor_on;
+	u_int32_t pseudo_pal[16];
+	spinlock_t lock_cmd;
+	int angle;	/* Current rotation angle */
+	int blank_mode;
+};
+
+/* 'sibling' spi device for lcm init */
+static struct platform_device glamo_spi_dev = {
+	.name		= "glamo-lcm-spi",
+};
+
+
+static int reg_read(struct glamofb_handle *glamo,
+			   u_int16_t reg)
+{
+	int i = 0;
+
+	for (i = 0; i != 2; i++)
+		nop();
+
+	return readw(glamo->base + reg);
+}
+
+static void reg_write(struct glamofb_handle *glamo,
+			     u_int16_t reg, u_int16_t val)
+{
+	int i = 0;
+
+	for (i = 0; i != 2; i++)
+		nop();
+
+	writew(val, glamo->base + reg);
+}
+
+static struct glamo_script glamo_regs[] = {
+	{ GLAMO_REG_LCD_MODE1, 0x0020 },
+	/* no display rotation, no hardware cursor, no dither, no gamma,
+	 * no retrace flip, vsync low-active, hsync low active,
+	 * no TVCLK, no partial display, hw dest color from fb,
+	 * no partial display mode, LCD1, software flip,  */
+	{ GLAMO_REG_LCD_MODE2, 0x9020 },
+	  /* video flip, no ptr, no ptr, dhclk off,
+	   * normal mode,  no cpuif,
+	   * res, serial msb first, single fb, no fr ctrl,
+	   * cpu if bits all zero, no crc
+	   * 0000 0000 0010  0000 */
+	{ GLAMO_REG_LCD_MODE3, 0x0b40 },
+	  /* src data rgb565, res, 18bit rgb666
+	   * 000 01 011 0100 0000 */
+	{ GLAMO_REG_LCD_POLARITY, 0x440c },
+	  /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
+	   * np cpu if, 9bit serial data, sclk rising edge latch data
+	   * 01 00 0 100 0 000 01 0 0 */
+	/* The following values assume 640*480@16bpp */
+	{ GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
+	{ GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
+	{ GLAMO_REG_LCD_B_BASE1, 0x6000 }, /* display B base address 15:0 */
+	{ GLAMO_REG_LCD_B_BASE2, 0x0009 }, /* display B base address 22:16 */
+	{ GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
+	{ GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
+	{ GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
+};
+
+static int glamofb_run_script(struct glamofb_handle *glamo,
+				struct glamo_script *script, int len)
+{
+	int i;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_run_script while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	for (i = 0; i < len; i++) {
+		struct glamo_script *line = &script[i];
+
+		if (line->reg == 0xffff)
+			return 0;
+		else if (line->reg == 0xfffe)
+			msleep(line->val);
+		else
+			reg_write(glamo, script[i].reg, script[i].val);
+	}
+
+	return 0;
+}
+
+static int glamofb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_check_var while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	if (var->yres > glamo->mach_info->yres.max)
+		var->yres = glamo->mach_info->yres.max;
+	else if (var->yres < glamo->mach_info->yres.min)
+		var->yres = glamo->mach_info->yres.min;
+
+	if (var->xres > glamo->mach_info->xres.max)
+		var->xres = glamo->mach_info->xres.max;
+	else if (var->xres < glamo->mach_info->xres.min)
+		var->xres = glamo->mach_info->xres.min;
+
+	if (var->bits_per_pixel > glamo->mach_info->bpp.max)
+		var->bits_per_pixel = glamo->mach_info->bpp.max;
+	else if (var->bits_per_pixel < glamo->mach_info->bpp.min)
+		var->bits_per_pixel = glamo->mach_info->bpp.min;
+
+	/* FIXME: set rgb positions */
+	switch (var->bits_per_pixel) {
+	case 16:
+		switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
+		case GLAMO_LCD_SRC_RGB565:
+			var->red.offset		= 11;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->red.length		= 5;
+			var->green.length	= 6;
+			var->blue.length	= 5;
+			var->transp.length	= 0;
+			break;
+		case GLAMO_LCD_SRC_ARGB1555:
+			var->transp.offset	= 15;
+			var->red.offset		= 10;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->transp.length	= 1;
+			var->red.length		= 5;
+			var->green.length	= 5;
+			var->blue.length	= 5;
+			break;
+		case GLAMO_LCD_SRC_ARGB4444:
+			var->transp.offset	= 12;
+			var->red.offset		= 8;
+			var->green.offset	= 4;
+			var->blue.offset	= 0;
+			var->transp.length	= 4;
+			var->red.length		= 4;
+			var->green.length	= 4;
+			var->blue.length	= 4;
+			break;
+		}
+		break;
+	case 24:
+	case 32:
+	default:
+		/* The Smedia Glamo doesn't support anything but 16bit color */
+		printk(KERN_ERR
+		       "Smedia driver does not [yet?] support 24/32bpp\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void reg_set_bit_mask(struct glamofb_handle *glamo,
+			     u_int16_t reg, u_int16_t mask,
+			     u_int16_t val)
+{
+	u_int16_t tmp;
+
+	val &= mask;
+
+	tmp = reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	reg_write(glamo, reg, tmp);
+}
+
+#define GLAMO_LCD_WIDTH_MASK 0x03FF
+#define GLAMO_LCD_HEIGHT_MASK 0x03FF
+#define GLAMO_LCD_PITCH_MASK 0x07FE
+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
+
+enum orientation {ORIENTATION_PORTRAIT, ORIENTATION_LANDSCAPE};
+
+/* the caller has to enxure lock_cmd is held and we are in cmd mode */
+static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation)
+{
+	int glamo_rot;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING rotate_lcd while "
+								 "suspended\n");
+		return;
+	}
+
+	switch (rotation) {
+	case FB_ROTATE_UR:
+		glamo_rot = GLAMO_LCD_ROT_MODE_0;
+		glamo->angle = 0;
+		break;
+	case FB_ROTATE_CW:
+		glamo_rot = GLAMO_LCD_ROT_MODE_90;
+		glamo->angle = 90;
+		break;
+	case FB_ROTATE_UD:
+		glamo_rot = GLAMO_LCD_ROT_MODE_180;
+		glamo->angle = 180;
+		break;
+	case FB_ROTATE_CCW:
+		glamo_rot = GLAMO_LCD_ROT_MODE_270;
+		glamo->angle = 270;
+		break;
+	default:
+		glamo->angle = 0;
+		glamo_rot = GLAMO_LCD_ROT_MODE_0;
+		break;
+	}
+
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_ROT_MODE_MASK,
+			 glamo_rot);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_MODE1,
+			 GLAMO_LCD_MODE1_ROTATE_EN,
+			 (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
+				 GLAMO_LCD_MODE1_ROTATE_EN : 0);
+}
+
+static enum orientation get_orientation(struct fb_var_screeninfo *var)
+{
+	if (var->xres <= var->yres)
+		return ORIENTATION_PORTRAIT;
+
+	return ORIENTATION_LANDSCAPE;
+}
+
+static int will_orientation_change(struct fb_var_screeninfo *var)
+{
+	enum orientation orient = get_orientation(var);
+
+	switch (orient) {
+	case ORIENTATION_LANDSCAPE:
+		if (var->rotate == FB_ROTATE_UR || var->rotate == FB_ROTATE_UD)
+			return 1;
+		break;
+	case ORIENTATION_PORTRAIT:
+		if (var->rotate == FB_ROTATE_CW || var->rotate == FB_ROTATE_CCW)
+			return 1;
+		break;
+	}
+	return 0;
+}
+
+static void glamofb_update_lcd_controller(struct glamofb_handle *glamo,
+					  struct fb_var_screeninfo *var)
+{
+	int sync, bp, disp, fp, total, xres, yres, pitch;
+	int uninitialized_var(orientation_changing);
+	unsigned long flags;
+
+	if (!glamo || !var)
+		return;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_update_lcd_controller while "
+								 "suspended\n");
+		return;
+	}
+
+	dev_dbg(&glamo->mach_info->glamo->pdev->dev,
+			  "glamofb_update_lcd_controller spin_lock_irqsave\n");
+	spin_lock_irqsave(&glamo->lock_cmd, flags);
+
+	if (glamofb_cmd_mode(glamo, 1))
+		goto out_unlock;
+
+/*	if (var->pixclock)
+		glamo_engine_reclock(glamo->mach_info->glamo,
+				     GLAMO_ENGINE_LCD,
+				     var->pixclock);*/
+
+	xres = var->xres;
+	yres = var->yres;
+
+    orientation_changing = will_orientation_change(var);
+	/* Adjust the pitch according to new orientation to come. */
+	if (orientation_changing)
+		pitch = var->yres * var->bits_per_pixel / 8;
+	else
+		pitch = var->xres * var->bits_per_pixel / 8;
+
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_WIDTH_MASK,
+			 xres);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_HEIGHT,
+			 GLAMO_LCD_HEIGHT_MASK,
+			 yres);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_PITCH,
+			 GLAMO_LCD_PITCH_MASK,
+			 pitch);
+
+	/* honour the rotation request */
+	__rotate_lcd(glamo, var->rotate);
+
+	if (orientation_changing) {
+		var->xres_virtual = yres;
+		var->xres = yres;
+		var->xres_virtual *= 2;
+		var->yres_virtual = xres;
+		var->yres = xres;
+	} else {
+		var->xres_virtual = xres;
+		var->yres_virtual = yres;
+		var->yres_virtual *= 2;
+	}
+
+	/* update scannout timings */
+	sync = 0;
+	bp = sync + var->hsync_len;
+	disp = bp + var->left_margin;
+	fp = disp + xres;
+	total = fp + var->right_margin;
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_START,
+			 GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_START,
+			  GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	sync = 0;
+	bp = sync + var->vsync_len;
+	disp = bp + var->upper_margin;
+	fp = disp + yres;
+	total = fp + var->lower_margin;
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_START,
+			  GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_START,
+			 GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	glamofb_cmd_mode(glamo, 0);
+
+out_unlock:
+	dev_dbg(&glamo->mach_info->glamo->pdev->dev,
+		      "glamofb_update_lcd_controller spin_unlock_irqrestore\n");
+	spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+}
+
+static int glamofb_pan_display(struct fb_var_screeninfo *var,
+		struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	u_int16_t page = var->yoffset / glamo->mach_info->yres.defval;
+	reg_write(glamo, GLAMO_REG_LCD_COMMAND2, page);
+
+	return 0;
+}
+
+static int glamofb_set_par(struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_set_par while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	default:
+		printk("Smedia driver doesn't support != 16bpp\n");
+		return -EINVAL;
+	}
+
+	info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
+
+	glamofb_update_lcd_controller(glamo, var);
+
+	return 0;
+}
+
+
+static void notify_blank(struct fb_info *info, int blank_mode)
+{
+	struct fb_event event;
+
+	event.info = info;
+	event.data = &blank_mode;
+	fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+}
+
+
+static int glamofb_blank(int blank_mode, struct fb_info *info)
+{
+	struct glamofb_handle *gfb = info->par;
+	struct glamo_core *gcore = gfb->mach_info->glamo;
+
+	dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
+
+	switch (blank_mode) {
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+		/* FIXME: add pdata hook/flag to indicate whether
+		 * we should already switch off pixel clock here */
+		break;
+	case FB_BLANK_POWERDOWN:
+		/* Simulating FB_BLANK_NORMAL allow turning off backlight */
+		if (gfb->blank_mode != FB_BLANK_NORMAL)
+			notify_blank(info, FB_BLANK_NORMAL);
+
+		/* LCM need notification before pixel clock is stopped */
+		notify_blank(info, blank_mode);
+
+		/* disable the pixel clock */
+		glamo_engine_clkreg_set(gcore, GLAMO_ENGINE_LCD,
+					GLAMO_CLOCK_LCD_EN_DCLK, 0);
+		gfb->blank_mode = blank_mode;
+		break;
+	case FB_BLANK_UNBLANK:
+	case FB_BLANK_NORMAL:
+		/* enable the pixel clock if off */
+		if (gfb->blank_mode == FB_BLANK_POWERDOWN)
+			glamo_engine_clkreg_set(gcore,
+					GLAMO_ENGINE_LCD,
+					GLAMO_CLOCK_LCD_EN_DCLK,
+					GLAMO_CLOCK_LCD_EN_DCLK);
+
+		notify_blank(info, blank_mode);
+		gfb->blank_mode = blank_mode;
+		break;
+	}
+
+	/* FIXME: once we have proper clock management in glamo-core,
+	 * we can determine if other units need MCLK1 or the PLL, and
+	 * disable it if not used. */
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int glamofb_setcolreg(unsigned regno,
+			     unsigned red, unsigned green, unsigned blue,
+			     unsigned transp, struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	unsigned int val;
+
+	if (glamo->mach_info->glamo->suspending) {
+		dev_err(&glamo->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_set_par while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	switch (glamo->fb->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_DIRECTCOLOR:
+		/* true-colour, use pseuo-palette */
+
+		if (regno < 16) {
+			u32 *pal = glamo->fb->pseudo_palette;
+
+			val  = chan_to_field(red, &glamo->fb->var.red);
+			val |= chan_to_field(green, &glamo->fb->var.green);
+			val |= chan_to_field(blue, &glamo->fb->var.blue);
+
+			pal[regno] = val;
+		};
+		break;
+	default:
+		return 1; /* unknown type */
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+static inline void glamofb_vsync_wait(struct glamofb_handle *glamo,
+		int line, int size, int range)
+{
+	int count[2];
+
+	do {
+		count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+		count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+	} while (count[0] != count[1] ||
+			(line < count[0] + range &&
+			 size > count[0] - range) ||
+			count[0] < range * 2);
+}
+
+/*
+ * Enable/disable the hardware cursor mode altogether
+ * (for blinking and such, use glamofb_cursor()).
+ */
+static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
+{
+	int y, size;
+
+	if (glamo->cursor_on) {
+		y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
+		size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
+
+		glamofb_vsync_wait(glamo, y, size, 30);
+	}
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
+			GLAMO_LCD_MODE1_CURSOR_EN,
+			on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
+	glamo->cursor_on = on;
+
+	/* Hide the cursor by default */
+	reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
+}
+
+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct glamofb_handle *glamo = info->par;
+	unsigned long flags;
+
+	spin_lock_irqsave(&glamo->lock_cmd, flags);
+
+	reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
+			cursor->enable ? cursor->image.width : 0);
+
+	if (cursor->set & FB_CUR_SETPOS) {
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
+			  cursor->image.dx);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
+			  cursor->image.dy);
+	}
+
+	if (cursor->set & FB_CUR_SETCMAP) {
+		uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
+		uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
+
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
+	}
+
+	if (cursor->set & FB_CUR_SETHOT)
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
+				(cursor->hot.x << 8) | cursor->hot.y);
+
+	if ((cursor->set & FB_CUR_SETSIZE) ||
+	    (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
+		int x, y, pitch, op;
+		const uint8_t *pcol = cursor->image.data;
+		const uint8_t *pmsk = cursor->mask;
+		uint8_t __iomem *dst = glamo->cursor_addr;
+		uint8_t dcol = 0;
+		uint8_t dmsk = 0;
+		uint8_t byte = 0;
+
+		if (cursor->image.depth > 1) {
+			spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+			return -EINVAL;
+		}
+
+		pitch = ((cursor->image.width + 7) >> 2) & ~1;
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
+			pitch);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
+			cursor->image.height);
+
+		for (y = 0; y < cursor->image.height; y++) {
+			byte = 0;
+			for (x = 0; x < cursor->image.width; x++) {
+				if ((x % 8) == 0) {
+					dcol = *pcol++;
+					dmsk = *pmsk++;
+				} else {
+					dcol >>= 1;
+					dmsk >>= 1;
+				}
+
+				if (cursor->rop == ROP_COPY)
+					op = (dmsk & 1) ?
+						(dcol & 1) ? 1 : 3 : 0;
+				else
+					op = ((dmsk & 1) << 1) |
+						((dcol & 1) << 0);
+				byte |= op << ((x & 3) << 1);
+
+				if (x % 4 == 3) {
+					writeb(byte, dst + x / 4);
+					byte = 0;
+				}
+			}
+			if (x % 4) {
+				writeb(byte, dst + x / 4);
+				byte = 0;
+			}
+
+			dst += pitch;
+		}
+	}
+
+	spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+
+	return 0;
+}
+#endif
+
+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
+{
+	/* DGCMdQempty -- 1 == command queue is empty */
+	return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
+}
+
+/* call holding gfb->lock_cmd  when locking, until you unlock */
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+{
+	int timeout = 2000000;
+
+	if (gfb->mach_info->glamo->suspending) {
+		dev_err(&gfb->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_cmd_mode while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
+	if (on) {
+		dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
+			__func__);
+		while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+			/* yield() */;
+		if (timeout < 0) {
+			printk(KERN_ERR"*************"
+				       "glamofb cmd_queue never got empty"
+				       "*************\n");
+			return -EIO;
+		}
+		dev_dbg(gfb->dev, "empty!\n");
+
+		/* display the entire frame then switch to command */
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
+
+		/* wait until lcd idle */
+		dev_dbg(gfb->dev, "waiting for lcd idle: ");
+		timeout = 2000000;
+		while ((!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
+		      (timeout--))
+			/* yield() */;
+		if (timeout < 0) {
+			printk(KERN_ERR"*************"
+				       "glamofb lcd never idle"
+				       "*************\n");
+			return -EIO;
+		}
+
+		mdelay(100);
+
+		dev_dbg(gfb->dev, "cmd mode entered\n");
+
+	} else {
+		/* RGB interface needs vsync/hsync */
+		if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
+			reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+				  GLAMO_LCD_CMD_TYPE_DISP |
+				  GLAMO_LCD_CMD_DATA_DISP_SYNC);
+
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_DISP_FIRE);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
+
+
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
+{
+	int timeout = 200000;
+
+	if (gfb->mach_info->glamo->suspending) {
+		dev_err(&gfb->mach_info->glamo->pdev->dev,
+				"IGNORING glamofb_cmd_write while "
+								 "suspended\n");
+		return -EBUSY;
+	}
+
+	dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__);
+	while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+		yield();
+	if (timeout < 0) {
+		printk(KERN_ERR"*************"
+				"glamofb cmd_queue never got empty"
+				"*************\n");
+		return 1;
+	}
+	dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
+
+	reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_write);
+
+static struct fb_ops glamofb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= glamofb_check_var,
+	.fb_pan_display	= glamofb_pan_display,
+	.fb_set_par	= glamofb_set_par,
+	.fb_blank	= glamofb_blank,
+	.fb_setcolreg	= glamofb_setcolreg,
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	.fb_cursor	= glamofb_cursor,
+#endif
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int glamofb_init_regs(struct glamofb_handle *glamo)
+{
+	struct fb_info *info = glamo->fb;
+
+	glamofb_check_var(&info->var, info);
+	glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
+	glamofb_set_par(info);
+
+	return 0;
+}
+
+static int __init glamofb_probe(struct platform_device *pdev)
+{
+	int rc = -EIO;
+	struct fb_info *fbinfo;
+	struct glamofb_handle *glamofb;
+	struct glamofb_platform_data *mach_info = pdev->dev.platform_data;
+
+	printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
+		"Openmoko, Inc.\n");
+
+	fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+	glamofb = fbinfo->par;
+	glamofb->fb = fbinfo;
+	glamofb->dev = &pdev->dev;
+
+	glamofb->angle = 0;
+	glamofb->blank_mode = FB_BLANK_POWERDOWN;
+
+	strcpy(fbinfo->fix.id, "SMedia Glamo");
+
+	glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "glamo-fb-regs");
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "platform device with no registers?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+							"glamo-fb-mem");
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "platform device with no memory ?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->reg = request_mem_region(glamofb->reg->start,
+					  RESSIZE(glamofb->reg), pdev->name);
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "failed to request mmio region\n");
+		goto out_free;
+	}
+
+	glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
+					     mach_info->fb_mem_size,
+					     pdev->name);
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "failed to request vram region\n");
+		goto out_release_reg;
+	}
+
+	/* we want to remap only the registers required for this core
+	 * driver. */
+	glamofb->base = ioremap(glamofb->reg->start, RESSIZE(glamofb->reg));
+	if (!glamofb->base) {
+		dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
+		goto out_release_fb;
+	}
+	fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
+	fbinfo->fix.smem_len = mach_info->fb_mem_size;
+
+	fbinfo->screen_base = ioremap(glamofb->fb_res->start,
+				       RESSIZE(glamofb->fb_res));
+	if (!fbinfo->screen_base) {
+		dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
+		goto out_release_fb;
+	}
+	glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
+
+	platform_set_drvdata(pdev, glamofb);
+
+	glamofb->mach_info = pdev->dev.platform_data;
+
+	fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+	fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux = 0;
+	fbinfo->fix.xpanstep = 0;
+	fbinfo->fix.ypanstep = mach_info->yres.defval;
+	fbinfo->fix.ywrapstep = 0;
+	fbinfo->fix.accel = FB_ACCEL_GLAMO;
+
+	fbinfo->var.nonstd = 0;
+	fbinfo->var.activate = FB_ACTIVATE_NOW;
+	fbinfo->var.height = mach_info->height;
+	fbinfo->var.width = mach_info->width;
+	fbinfo->var.accel_flags = 0;	/* FIXME */
+	fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+	fbinfo->fbops = &glamofb_ops;
+	fbinfo->flags = FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette = &glamofb->pseudo_pal;
+
+	fbinfo->var.xres = mach_info->xres.defval;
+	fbinfo->var.xres_virtual = mach_info->xres.defval;
+	fbinfo->var.yres = mach_info->yres.defval;
+	fbinfo->var.yres_virtual = mach_info->yres.defval * 2;
+	fbinfo->var.bits_per_pixel = mach_info->bpp.defval;
+
+	fbinfo->var.pixclock = mach_info->pixclock;
+	fbinfo->var.left_margin = mach_info->left_margin;
+	fbinfo->var.right_margin = mach_info->right_margin;
+	fbinfo->var.upper_margin = mach_info->upper_margin;
+	fbinfo->var.lower_margin = mach_info->lower_margin;
+	fbinfo->var.hsync_len = mach_info->hsync_len;
+	fbinfo->var.vsync_len = mach_info->vsync_len;
+
+	memset(fbinfo->screen_base, 0,
+			mach_info->xres.max *
+			mach_info->yres.max *
+			mach_info->bpp.max / 8);
+
+	glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
+	glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
+
+	dev_info(&pdev->dev, "spin_lock_init\n");
+	spin_lock_init(&glamofb->lock_cmd);
+	glamofb_init_regs(glamofb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	glamofb_cursor_onoff(glamofb, 1);
+#endif
+
+#ifdef CONFIG_MFD_GLAMO_FB_XGLAMO_WORKAROUND
+	/* sysfs */
+	rc = sysfs_create_group(&pdev->dev.kobj, &glamo_fb_attr_group);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "cannot create sysfs group\n");
+		goto out_unmap_fb;
+	}
+#endif
+
+	rc = register_framebuffer(fbinfo);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to register framebuffer\n");
+		goto out_unmap_fb;
+	}
+
+	if (mach_info->spi_info) {
+		/* register the sibling spi device */
+		mach_info->spi_info->glamofb_handle = glamofb;
+		glamo_spi_dev.dev.parent = &pdev->dev;
+		glamo_spi_dev.dev.platform_data = mach_info->spi_info;
+		platform_device_register(&glamo_spi_dev);
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+out_unmap_fb:
+	iounmap(fbinfo->screen_base);
+	iounmap(glamofb->base);
+out_release_fb:
+	release_mem_region(glamofb->fb_res->start, RESSIZE(glamofb->fb_res));
+out_release_reg:
+	release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
+out_free:
+	framebuffer_release(fbinfo);
+	return rc;
+}
+
+static int glamofb_remove(struct platform_device *pdev)
+{
+	struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(glamofb->base);
+	release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
+	kfree(glamofb);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int glamofb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct glamofb_handle *gfb = platform_get_drvdata(pdev);
+
+	/* we need to stop anything touching our framebuffer */
+	fb_set_suspend(gfb->fb, 1);
+
+	/* seriously -- nobody is allowed to touch glamo memory when we
+	 * are suspended or we lock on nWAIT
+	 */
+	/* iounmap(gfb->fb->screen_base); */
+
+	return 0;
+}
+
+static int glamofb_resume(struct platform_device *pdev)
+{
+	struct glamofb_handle *gfb = platform_get_drvdata(pdev);
+	struct glamofb_platform_data *mach_info = pdev->dev.platform_data;
+
+	/* OK let's allow framebuffer ops again */
+	/* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
+				       RESSIZE(gfb->fb_res)); */
+	glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
+	glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
+
+	printk(KERN_ERR"spin_lock_init\n");
+	spin_lock_init(&gfb->lock_cmd);
+	glamofb_init_regs(gfb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	glamofb_cursor_onoff(gfb, 1);
+#endif
+
+	fb_set_suspend(gfb->fb, 0);
+
+	return 0;
+}
+#else
+#define glamofb_suspend NULL
+#define glamofb_resume  NULL
+#endif
+
+static struct platform_driver glamofb_driver = {
+	.probe		= glamofb_probe,
+	.remove		= glamofb_remove,
+	.suspend	= glamofb_suspend,
+	.resume	= glamofb_resume,
+	.driver		= {
+		.name	= "glamo-fb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __devinit glamofb_init(void)
+{
+	return platform_driver_register(&glamofb_driver);
+}
+
+static void __exit glamofb_cleanup(void)
+{
+	platform_driver_unregister(&glamofb_driver);
+}
+
+module_init(glamofb_init);
+module_exit(glamofb_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-gpio.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-gpio.c
new file mode 100644
index 0000000..45d0bf9
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-gpio.c
@@ -0,0 +1,62 @@
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <linux/glamo-gpio.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
+		       unsigned int value)
+{
+	unsigned int reg = REG_OF_GPIO(pin);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if (value)
+		tmp |= OUTPUT_BIT(pin);
+	else
+		tmp &= ~OUTPUT_BIT(pin);
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_gpio_setpin);
+
+int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin)
+{
+	return readw(REG_OF_GPIO(pin)) & INPUT_BIT(pin) ? 1 : 0;
+}
+EXPORT_SYMBOL(glamo_gpio_getpin);
+
+void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc)
+{
+	unsigned int reg = REG_OF_GPIO(pinfunc);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+
+	if ((pinfunc & 0x00f0) == GLAMO_GPIO_F_FUNC) {
+		/* pin is a function pin: clear gpio bit */
+		tmp &= ~FUNC_BIT(pinfunc);
+	} else {
+		/* pin is gpio: set gpio bit */
+		tmp |= FUNC_BIT(pinfunc);
+
+		if (pinfunc & GLAMO_GPIO_F_IN) {
+			/* gpio input: set bit to disable output mode */
+			tmp |= GPIO_OUT_BIT(pinfunc);
+		} else if (pinfunc & GLAMO_GPIO_F_OUT) {
+			/* gpio output: clear bit to enable output mode */
+			tmp &= ~GPIO_OUT_BIT(pinfunc);
+		}
+	}
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_gpio_cfgpin);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c
new file mode 100644
index 0000000..a7129fe
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c
@@ -0,0 +1,240 @@
+/*
+ * Copyright (C) 2007 Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Smedia Glamo GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver currently only implements a minimum subset of the hardware
+ * features, esp. those features that are required to drive the jbt6k74
+ * LCM controller asic in the TD028TTEC1 LCM.
+ *
+*/
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/glamo.h>
+
+#include <linux/glamofb.h>
+
+#include <mach/hardware.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_spi {
+	struct spi_bitbang	bitbang;
+	struct spi_master	*master;
+	struct glamo_spi_info	*info;
+	struct device		*dev;
+};
+
+static inline struct glamo_spi *to_gs(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	unsigned int bpw;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+
+	if (bpw != 9 && bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void glamo_spi_chipsel(struct spi_device *spi, int value)
+{
+#if 0
+	struct glamo_spi *gs = to_gs(spi);
+
+	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
+		value, spi, gs, gs->info, gs->info->glamofb_handle);
+
+	glamofb_cmd_mode(gs->info->glamofb_handle, value);
+#endif
+}
+
+static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct glamo_spi *gs = to_gs(spi);
+	const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf;
+	u_int16_t nine_bits;
+	int i;
+
+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n",
+		t->tx_buf, t->rx_buf, t->bits_per_word, t->len);
+
+	if (spi->bits_per_word == 9)
+		nine_bits = (1 << 9);
+	else
+		nine_bits = 0;
+
+	if (t->len > 3 * sizeof(u_int16_t)) {
+		dev_err(&spi->dev, "this driver doesn't support "
+			"%u sized xfers\n", t->len);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < t->len/sizeof(u_int16_t); i++) {
+		/* actually transfer the data */
+#if 1
+		glamofb_cmd_write(gs->info->glamofb_handle,
+				  GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits |
+				  (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff));
+#endif
+		/* FIXME: fire ?!? */
+		if (i == 0 && (ui16[i] & 0x1ff) == 0x29) {
+			dev_dbg(&spi->dev, "leaving command mode\n");
+			glamofb_cmd_mode(gs->info->glamofb_handle, 0);
+		}
+	}
+
+	return t->len;
+}
+
+static int glamo_spi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 9;
+
+	/* FIXME: hardware can do this */
+	if (spi->mode & SPI_LSB_FIRST)
+		return -EINVAL;
+
+	ret = glamo_spi_setupxfer(spi, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n",
+		__FUNCTION__, spi->mode, spi->bits_per_word);
+
+	return 0;
+}
+
+static int glamo_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct glamo_spi *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+	memset(sp, 0, sizeof(struct glamo_spi));
+
+	sp->master = spi_master_get(master);
+	sp->info = pdev->dev.platform_data;
+	if (!sp->info) {
+		dev_err(&pdev->dev, "can't operate without platform data\n");
+		ret = -EIO;
+		goto err_no_pdev;
+	}
+	dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info);
+
+	sp->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, sp);
+
+	sp->bitbang.master = sp->master;
+	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
+	sp->bitbang.chipselect = glamo_spi_chipsel;
+	sp->bitbang.txrx_bufs = glamo_spi_txrx;
+	sp->bitbang.master->setup = glamo_spi_setup;
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	glamofb_cmd_mode(sp->info->glamofb_handle, 1);
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&pdev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+err_no_bitbang:
+	platform_set_drvdata(pdev, NULL);
+err_no_pdev:
+	spi_master_put(sp->bitbang.master);
+err:
+	return ret;
+
+}
+
+static int glamo_spi_remove(struct platform_device *pdev)
+{
+	struct glamo_spi *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+#define glamo_spi_suspend NULL
+#define glamo_spi_resume NULL
+
+static struct platform_driver glamo_spi_drv = {
+	.probe		= glamo_spi_probe,
+	.remove		= glamo_spi_remove,
+	.suspend	= glamo_spi_suspend,
+	.resume		= glamo_spi_resume,
+	.driver		= {
+		.name	= "glamo-lcm-spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init glamo_spi_init(void)
+{
+	return platform_driver_register(&glamo_spi_drv);
+}
+
+static void __exit glamo_spi_exit(void)
+{
+	platform_driver_unregister(&glamo_spi_drv);
+}
+
+module_init(glamo_spi_init);
+module_exit(glamo_spi_exit);
+
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
new file mode 100644
index 0000000..956be57
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
@@ -0,0 +1,1167 @@
+/*
+ *  linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
+ *
+ *  Copyright (C) 2007 Openmoko, Inc,  Andy Green <andy@openmoko.com>
+ *  Based on S3C MMC driver that was:
+ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <asm/dma.h>
+#include <asm/dma-mapping.h>
+#include <asm/io.h>
+
+#include "glamo-mci.h"
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+/* from glamo-core.c */
+extern struct glamo_mci_pdata glamo_mci_def_pdata;
+
+static spinlock_t clock_lock;
+
+#define DRIVER_NAME "glamo-mci"
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start) + 1)
+
+static void glamo_mci_send_request(struct mmc_host *mmc);
+
+/*
+ * Max SD clock rate
+ *
+ * held at /(3 + 1) due to concerns of 100R recommended series resistor
+ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_max_clk=10000000
+ *
+ * for example
+ */
+
+static int sd_max_clk = 50000000 / 3;
+module_param(sd_max_clk, int, 0644);
+
+/*
+ * Slow SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_slow_ratio=8
+ *
+ * for example
+ *
+ * platform callback is used to decide effective clock rate, if not
+ * defined then max is used, if defined and returns nonzero, rate is
+ * divided by this factor
+ */
+
+static int sd_slow_ratio = 8;
+module_param(sd_slow_ratio, int, 0644);
+
+/*
+ * Post-power SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_post_power_clock=1000000
+ *
+ * for example
+ *
+ * After changing power to card, clock is held at this rate until first bulk
+ * transfer completes
+ */
+
+static int sd_post_power_clock = 1000000;
+module_param(sd_post_power_clock, int, 0644);
+
+
+/*
+ * SD Signal drive strength
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_drive=0
+ *
+ * for example
+ */
+
+static int sd_drive;
+module_param(sd_drive, int, 0644);
+
+/*
+ * SD allow SD clock to run while idle
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_idleclk=0
+ *
+ * for example
+ */
+
+static int sd_idleclk = 0; /* disallow idle clock by default */
+module_param(sd_idleclk, int, 0644);
+
+/* used to stash real idleclk state in suspend: we force it to run in there */
+static int suspend_sd_idleclk;
+
+
+unsigned char CRC7(u8 * pu8, int cnt)
+{
+	u8 crc = 0;
+
+	while (cnt--) {
+		int n;
+		u8 d = *pu8++;
+		for (n = 0; n < 8; n++) {
+			crc <<= 1;
+			if ((d & 0x80) ^ (crc & 0x80))
+				crc ^= 0x09;
+			d <<= 1;
+		}
+	}
+	return (crc << 1) | 1;
+}
+
+static int get_data_buffer(struct glamo_mci_host *host,
+			   volatile u32 *words, volatile u16 **pointer)
+{
+	struct scatterlist *sg;
+
+	*words = 0;
+	*pointer = NULL;
+
+	if (host->pio_active == XFER_NONE)
+		return -EINVAL;
+
+	if ((!host->mrq) || (!host->mrq->data))
+		return -EINVAL;
+
+	if (host->pio_sgptr >= host->mrq->data->sg_len) {
+		dev_dbg(&host->pdev->dev, "no more buffers (%i/%i)\n",
+		      host->pio_sgptr, host->mrq->data->sg_len);
+		return -EBUSY;
+	}
+	sg = &host->mrq->data->sg[host->pio_sgptr];
+
+	*words = sg->length >> 1; /* we are working with a 16-bit data bus */
+	*pointer = page_address(sg_page(sg)) + sg->offset;
+
+	BUG_ON(((long)(*pointer)) & 1);
+
+	host->pio_sgptr++;
+
+	/* dev_info(&host->pdev->dev, "new buffer (%i/%i)\n",
+	      host->pio_sgptr, host->mrq->data->sg_len); */
+	return 0;
+}
+
+static void do_pio_read(struct glamo_mci_host *host)
+{
+	int res;
+	u16 __iomem *from_ptr = host->base_data + (RESSIZE(host->mem_data) /
+							      sizeof(u16) / 2);
+#ifdef DEBUG
+	u16 * block;
+#endif
+
+	while (1) {
+		res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
+		if (res) {
+			host->pio_active = XFER_NONE;
+			host->complete_what = COMPLETION_FINALIZE;
+
+			dev_dbg(&host->pdev->dev, "pio_read(): "
+				"complete (no more data).\n");
+			return;
+		}
+
+		dev_dbg(&host->pdev->dev, "pio_read(): host->pio_words: %d\n",
+				host->pio_words);
+
+		host->pio_count += host->pio_words << 1;
+
+#ifdef DEBUG
+		block = (u16 *)host->pio_ptr;
+		res = host->pio_words << 1;
+#endif
+#if 0
+		/* u16-centric memcpy */
+		while (host->pio_words--)
+			*host->pio_ptr++ = *from_ptr++;
+#else
+		/* memcpy can be faster? */
+		memcpy((void *)host->pio_ptr, from_ptr, host->pio_words << 1);
+		host->pio_ptr += host->pio_words;
+#endif
+
+#ifdef DEBUG
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
+			       (void *)block, res, 1);
+#endif
+	}
+}
+
+static int do_pio_write(struct glamo_mci_host *host)
+{
+	int res = 0;
+	volatile u16 __iomem *to_ptr = host->base_data;
+	int err = 0;
+
+	dev_dbg(&host->pdev->dev, "pio_write():\n");
+	while (!res) {
+		res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
+		if (res)
+			continue;
+
+		dev_dbg(&host->pdev->dev, "pio_write():new source: [%i]@[%p]\n",
+			host->pio_words, host->pio_ptr);
+
+		host->pio_count += host->pio_words << 1;
+		while (host->pio_words--)
+			writew(*host->pio_ptr++, to_ptr++);
+	}
+
+	dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
+	host->pio_active = XFER_NONE;
+	return err;
+}
+
+static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	if (div < 0) {
+		/* stop clock - remove clock from divider input */
+		writew(readw(glamo_mci_def_pdata.pglamo->base +
+		     GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
+		     glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
+
+		goto done;
+	} else {
+		/* set the nearest prescaler factor
+		*
+		* register shared with SCLK divisor -- no chance of race because
+		* we don't use sensor interface
+		*/
+		writew((readw(glamo_mci_def_pdata.pglamo->base +
+				GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
+		       glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
+		/* enable clock to divider input */
+		writew(readw(glamo_mci_def_pdata.pglamo->base +
+			GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
+		     glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
+	}
+
+	if (host->force_slow_during_powerup)
+		div = host->clk_rate / sd_post_power_clock;
+	else
+		if (host->pdata->glamo_mci_use_slow)
+			if ((host->pdata->glamo_mci_use_slow)())
+				div = div * sd_slow_ratio;
+
+	if (div > 255)
+		div = 255;
+
+	/*
+	 * set the nearest prescaler factor
+	 *
+	 * register shared with SCLK divisor -- no chance of race because
+	 * we don't use sensor interface
+	 */
+	writew((readw(glamo_mci_def_pdata.pglamo->base +
+			GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
+		glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
+	/* enable clock to divider input */
+	writew(readw(glamo_mci_def_pdata.pglamo->base +
+		GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
+		glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
+
+done:
+	spin_unlock_irqrestore(&clock_lock, flags);
+}
+
+static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq,
+								  int *division)
+{
+	int div = 0;
+	int real_rate = 0;
+
+	if (freq) {
+		/* Set clock */
+		for (div = 0; div < 256; div++) {
+			real_rate = host->clk_rate / (div + 1);
+			if (real_rate <= freq)
+				break;
+		}
+		if (div > 255)
+			div = 255;
+
+		if (division)
+			*division = div;
+
+		__glamo_mci_fix_card_div(host, div);
+
+	} else {
+		/* stop clock */
+		if (division)
+			*division = 0xff;
+
+		if (!sd_idleclk && !host->force_slow_during_powerup)
+			/* clock off */
+			__glamo_mci_fix_card_div(host, -1);
+	}
+
+	return real_rate;
+}
+
+
+static void glamo_mci_irq_worker(struct work_struct *work)
+{
+	struct glamo_mci_host *host =
+			    container_of(work, struct glamo_mci_host, irq_work);
+	struct mmc_command *cmd = host->mrq->cmd;
+
+	if (host->pio_active == XFER_READ)
+		do_pio_read(host);
+
+	host->mrq->data->bytes_xfered = host->pio_count;
+	dev_dbg(&host->pdev->dev, "count=%d\n", host->pio_count);
+
+	/* issue STOP if we have been given one to use */
+	if (host->mrq->stop) {
+		host->cmd_is_stop = 1;
+		glamo_mci_send_request(host->mmc);
+		host->cmd_is_stop = 0;
+	}
+
+	if (!sd_idleclk && !host->force_slow_during_powerup)
+		/* clock off */
+		__glamo_mci_fix_card_div(host, -1);
+
+	host->complete_what = COMPLETION_NONE;
+	host->mrq = NULL;
+	mmc_request_done(host->mmc, cmd->mrq);
+}
+
+static void glamo_mci_irq_host(struct glamo_mci_host *host)
+{
+	u16 status;
+	struct mmc_command *cmd;
+	unsigned long iflags;
+
+	if (host->suspending) { /* bad news, dangerous time */
+		dev_err(&host->pdev->dev, "****glamo_mci_irq before resumed\n");
+		return;
+	}
+
+	if (!host->mrq)
+		return;
+	cmd = host->mrq->cmd;
+	if (!cmd)
+		return;
+
+	spin_lock_irqsave(&host->complete_lock, iflags);
+
+	status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
+	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+
+	/* ack this interrupt source */
+	writew(GLAMO_IRQ_MMC,
+	       glamo_mci_def_pdata.pglamo->base + GLAMO_REG_IRQ_CLEAR);
+
+	/* we ignore a data timeout report if we are also told the data came */
+	if (status & GLAMO_STAT1_MMC_RB_DRDY)
+		status &= ~GLAMO_STAT1_MMC_DTOUT;
+
+	if (status & (GLAMO_STAT1_MMC_RTOUT |
+		      GLAMO_STAT1_MMC_DTOUT))
+		cmd->error = -ETIMEDOUT;
+	if (status & (GLAMO_STAT1_MMC_BWERR |
+		      GLAMO_STAT1_MMC_BRERR))
+		cmd->error = -EILSEQ;
+	if (cmd->error) {
+		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+		goto done;
+	}
+
+	/*
+	 * disable the initial slow start after first bulk transfer
+	 */
+	if (host->force_slow_during_powerup)
+		host->force_slow_during_powerup--;
+
+	/*
+	 * we perform the memcpy out of Glamo memory outside of IRQ context
+	 * so we don't block other interrupts
+	 */
+	schedule_work(&host->irq_work);
+
+	goto leave;
+
+done:
+	host->complete_what = COMPLETION_NONE;
+	host->mrq = NULL;
+	mmc_request_done(host->mmc, cmd->mrq);
+leave:
+	spin_unlock_irqrestore(&host->complete_lock, iflags);
+}
+
+static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct glamo_mci_host *host = (struct glamo_mci_host *)
+				      desc->handler_data;
+
+	if (host)
+		glamo_mci_irq_host(host);
+
+}
+
+static int glamo_mci_send_command(struct glamo_mci_host *host,
+				  struct mmc_command *cmd)
+{
+	u8 u8a[6];
+	u16 fire = 0;
+
+	/* if we can't do it, reject as busy */
+	if (!readw(host->base + GLAMO_REG_MMC_RB_STAT1) &
+	     GLAMO_STAT1_MMC_IDLE) {
+		host->mrq = NULL;
+		cmd->error = -EBUSY;
+		mmc_request_done(host->mmc, host->mrq);
+		return -EBUSY;
+	}
+
+	/* create an array in wire order for CRC computation */
+	u8a[0] = 0x40 | (cmd->opcode & 0x3f);
+	u8a[1] = (u8)(cmd->arg >> 24);
+	u8a[2] = (u8)(cmd->arg >> 16);
+	u8a[3] = (u8)(cmd->arg >> 8);
+	u8a[4] = (u8)cmd->arg;
+	u8a[5] = CRC7(&u8a[0], 5); /* CRC7 on first 5 bytes of packet */
+
+	/* issue the wire-order array including CRC in register order */
+	writew((u8a[4] << 8) | u8a[5], host->base + GLAMO_REG_MMC_CMD_REG1);
+	writew((u8a[2] << 8) | u8a[3], host->base + GLAMO_REG_MMC_CMD_REG2);
+	writew((u8a[0] << 8) | u8a[1], host->base + GLAMO_REG_MMC_CMD_REG3);
+
+	/* command index toggle */
+	fire |= (host->ccnt & 1) << 12;
+
+	/* set type of command */
+	switch (mmc_cmd_type(cmd)) {
+	case MMC_CMD_BC:
+		fire |= GLAMO_FIRE_MMC_CMDT_BNR;
+		break;
+	case MMC_CMD_BCR:
+		fire |= GLAMO_FIRE_MMC_CMDT_BR;
+		break;
+	case MMC_CMD_AC:
+		fire |= GLAMO_FIRE_MMC_CMDT_AND;
+		break;
+	case MMC_CMD_ADTC:
+		fire |= GLAMO_FIRE_MMC_CMDT_AD;
+		break;
+	}
+	/*
+	 * if it expects a response, set the type expected
+	 *
+	 * R1, Length  : 48bit, Normal response
+	 * R1b, Length : 48bit, same R1, but added card busy status
+	 * R2, Length  : 136bit (really 128 bits with CRC snipped)
+	 * R3, Length  : 48bit (OCR register value)
+	 * R4, Length  : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
+	 * R5, Length  : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
+	 * R6, Length  : 48bit (RCA register)
+	 * R7, Length  : 48bit (interface condition, VHS(voltage supplied),
+	 *                     check pattern, CRC7)
+	 */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R6: /* same index as R7 and R1 */
+		fire |= GLAMO_FIRE_MMC_RSPT_R1;
+		break;
+	case MMC_RSP_R1B:
+		fire |= GLAMO_FIRE_MMC_RSPT_R1b;
+		break;
+	case MMC_RSP_R2:
+		fire |= GLAMO_FIRE_MMC_RSPT_R2;
+		break;
+	case MMC_RSP_R3:
+		fire |= GLAMO_FIRE_MMC_RSPT_R3;
+		break;
+	/* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
+	}
+	/*
+	 * From the command index, set up the command class in the host ctrllr
+	 *
+	 * missing guys present on chip but couldn't figure out how to use yet:
+	 *     0x0 "stream read"
+	 *     0x9 "cancel running command"
+	 */
+	switch (cmd->opcode) {
+	case MMC_READ_SINGLE_BLOCK:
+		fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
+		break;
+	case MMC_SWITCH: /* 64 byte payload */
+	case 0x33: /* observed issued by MCI */
+	case MMC_READ_MULTIPLE_BLOCK:
+		/* we will get an interrupt off this */
+		if (!cmd->mrq->stop)
+			/* multiblock no stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBRNS;
+		else
+			 /* multiblock with stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBRS;
+		break;
+	case MMC_WRITE_BLOCK:
+		fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
+		break;
+	case MMC_WRITE_MULTIPLE_BLOCK:
+		if (cmd->mrq->stop)
+			 /* multiblock with stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBWS;
+		else
+// 			 /* multiblock NO stop-- 'RESERVED'? */
+			fire |= GLAMO_FIRE_MMC_CC_MBWNS;
+		break;
+	case MMC_STOP_TRANSMISSION:
+		fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+		break;
+	default:
+		fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+		break;
+	}
+
+	/* always largest timeout */
+	writew(0xfff, host->base + GLAMO_REG_MMC_TIMEOUT);
+
+	/* Generate interrupt on txfer */
+	writew((readw(host->base + GLAMO_REG_MMC_BASIC) & 0x3e) |
+		   0x0800 | GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+		   GLAMO_BASIC_MMC_EN_COMPL_INT | (sd_drive << 6),
+		   host->base + GLAMO_REG_MMC_BASIC);
+
+	/* send the command out on the wire */
+	/* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
+	writew(fire, host->base + GLAMO_REG_MMC_CMD_FIRE);
+	cmd->error = 0;
+	return 0;
+}
+
+static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+				 struct mmc_data *data)
+{
+	/*
+	 * the S-Media-internal RAM offset for our MMC buffer
+	 * Read is halfway up the buffer and write is at the start
+	 */
+	if (data->flags & MMC_DATA_READ) {
+		writew((u16)(GLAMO_FB_SIZE + (RESSIZE(host->mem_data) / 2)),
+			   host->base + GLAMO_REG_MMC_WDATADS1);
+		writew((u16)((GLAMO_FB_SIZE +
+					(RESSIZE(host->mem_data) / 2)) >> 16),
+			   host->base + GLAMO_REG_MMC_WDATADS2);
+	} else {
+		writew((u16)GLAMO_FB_SIZE, host->base +
+					       GLAMO_REG_MMC_RDATADS1);
+		writew((u16)(GLAMO_FB_SIZE >> 16), host->base +
+						       GLAMO_REG_MMC_RDATADS2);
+	}
+
+	/* set up the block info */
+	writew(data->blksz, host->base + GLAMO_REG_MMC_DATBLKLEN);
+	writew(data->blocks, host->base + GLAMO_REG_MMC_DATBLKCNT);
+	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+				   data->blksz, data->blocks);
+	host->pio_sgptr = 0;
+	host->pio_words = 0;
+	host->pio_count = 0;
+	host->pio_active = 0;
+	/* if write, prep the write into the shared RAM before the command */
+	if (data->flags & MMC_DATA_WRITE) {
+		host->pio_active = XFER_WRITE;
+		return do_pio_write(host);
+	}
+	host->pio_active = XFER_READ;
+	return 0;
+}
+
+static void glamo_mci_send_request(struct mmc_host *mmc)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+	u16 * pu16 = (u16 *)&cmd->resp[0];
+	u16 * reg_resp = (u16 *)(host->base + GLAMO_REG_MMC_CMD_RSP1);
+	u16 status;
+	int n;
+	int timeout = 1000000;
+	int insanity_timeout = 1000000;
+
+	if (host->suspending) {
+		dev_err(&host->pdev->dev, "IGNORING glamo_mci_send_request while "
+								 "suspended\n");
+		cmd->error = -EIO;
+		if (cmd->data)
+			cmd->data->error = -EIO;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	host->ccnt++;
+	/*
+	 * somehow 2.6.24 MCI manages to issue MMC_WRITE_BLOCK *without* the
+	 * MMC_DATA_WRITE flag, WTF?  Work around the madness.
+	 */
+	if (cmd->opcode == MMC_WRITE_BLOCK)
+		if (mrq->data)
+			mrq->data->flags |= MMC_DATA_WRITE;
+
+	 /* this guy has data to read/write? */
+	if ((!host->cmd_is_stop) && cmd->data) {
+		int res;
+		host->dcnt++;
+		res = glamo_mci_prepare_pio(host, cmd->data);
+		if (res) {
+			cmd->error = -EIO;
+			cmd->data->error = -EIO;
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	dev_dbg(&host->pdev->dev,"cmd 0x%x, "
+		 "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
+		 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
+		 cmd->flags);
+
+	/* resume requested clock rate
+	 * scale it down by sd_slow_ratio if platform requests it
+	 */
+	__glamo_mci_fix_card_div(host, host->clk_div);
+
+	if (glamo_mci_send_command(host, cmd))
+		goto bail;
+
+	/* we are deselecting card?  because it isn't going to ack then... */
+	if ((cmd->opcode == 7) && (cmd->arg == 0))
+		goto done;
+
+	/*
+	 * we must spin until response is ready or timed out
+	 * -- we don't get interrupts unless there is a bulk rx
+	 */
+	do
+		status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
+	while (((((status >> 15) & 1) != (host->ccnt & 1)) ||
+		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
+			     GLAMO_STAT1_MMC_RTOUT |
+			     GLAMO_STAT1_MMC_DTOUT |
+			     GLAMO_STAT1_MMC_BWERR |
+			     GLAMO_STAT1_MMC_BRERR)))) && (insanity_timeout--));
+
+	if (insanity_timeout < 0)
+		dev_info(&host->pdev->dev, "command timeout, continuing\n");
+
+	if (status & (GLAMO_STAT1_MMC_RTOUT |
+		      GLAMO_STAT1_MMC_DTOUT))
+		cmd->error = -ETIMEDOUT;
+	if (status & (GLAMO_STAT1_MMC_BWERR |
+		      GLAMO_STAT1_MMC_BRERR))
+		cmd->error = -EILSEQ;
+
+	if (host->cmd_is_stop)
+		goto bail;
+
+	if (cmd->error) {
+		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+		goto done;
+	}
+	/*
+	 * mangle the response registers in two different exciting
+	 * undocumented ways discovered by trial and error
+	 */
+	if (mmc_resp_type(cmd) == MMC_RSP_R2)
+		/* grab the response */
+		for (n = 0; n < 8; n++) /* super mangle power 1 */
+			pu16[n ^ 6] = readw(&reg_resp[n]);
+	else
+		for (n = 0; n < 3; n++) /* super mangle power 2 */
+			pu16[n] = (readw(&reg_resp[n]) >> 8) |
+				  (readw(&reg_resp[n + 1]) << 8);
+	/*
+	 * if we don't have bulk data to take care of, we're done
+	 */
+	if (!cmd->data)
+		goto done;
+	if (!(cmd->data->flags & (MMC_DATA_READ | MMC_DATA_WRITE)))
+		goto done;
+
+	/*
+	 * Otherwise can can use the interrupt as async completion --
+	 * if there is read data coming, or we wait for write data to complete,
+	 * exit without mmc_request_done() as the payload interrupt
+	 * will service it
+	 */
+	dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
+	/*
+	 * if the glamo INT# line isn't wired (*cough* it can happen)
+	 * I'm afraid we have to spin on the IRQ status bit and "be
+	 * our own INT# line"
+	 */
+	if (!glamo_mci_def_pdata.pglamo->irq_works) {
+		/*
+		 * we have faith we will get an "interrupt"...
+		 * but something insane like suspend problems can mean
+		 * we spin here forever, so we timeout after a LONG time
+		 */
+		while ((!(readw(glamo_mci_def_pdata.pglamo->base +
+			 GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
+		       (timeout--))
+			;
+
+		if (timeout < 0) {
+			if (cmd->data->error)
+				cmd->data->error = -ETIMEDOUT;
+			dev_err(&host->pdev->dev, "Payload timeout\n");
+			goto bail;
+		}
+
+		/* yay we are an interrupt controller! -- call the ISR
+		 * it will stop clock to card
+		 */
+		glamo_mci_irq_host(host);
+	}
+	return;
+
+done:
+	host->complete_what = COMPLETION_NONE;
+	host->mrq = NULL;
+	mmc_request_done(host->mmc, cmd->mrq);
+bail:
+	if (!sd_idleclk && !host->force_slow_during_powerup)
+		/* stop the clock to card */
+		__glamo_mci_fix_card_div(host, -1);
+}
+
+static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+
+	host->cmd_is_stop = 0;
+	host->mrq = mrq;
+	glamo_mci_send_request(mmc);
+}
+
+#if 1
+static void glamo_mci_reset(struct glamo_mci_host *host)
+{
+	if (host->suspending) {
+		dev_err(&host->pdev->dev, "IGNORING glamo_mci_reset while "
+								 "suspended\n");
+		return;
+	}
+	dev_dbg(&host->pdev->dev, "******* glamo_mci_reset\n");
+	/* reset MMC controller */
+	writew(GLAMO_CLOCK_MMC_RESET | GLAMO_CLOCK_MMC_DG_TCLK |
+		   GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
+		   GLAMO_CLOCK_MMC_EN_M9CLK,
+		   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
+	udelay(10);
+	/* and disable reset */
+	writew(GLAMO_CLOCK_MMC_DG_TCLK |
+		   GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
+		   GLAMO_CLOCK_MMC_EN_M9CLK,
+		   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
+}
+#endif
+static inline int glamo_mci_get_mv(int vdd)
+{
+	int mv = 1650;
+
+	if (vdd > 7)
+		mv += 350 + 100 * (vdd - 8);
+
+	return mv;
+}
+
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	struct regulator *regulator;
+	int n = 0;
+	int div;
+	int powering = 0;
+	int mv;
+
+	if (host->suspending) {
+		dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
+								 "suspended\n");
+		return;
+	}
+
+	regulator = host->regulator;
+
+	/* Set power */
+	switch(ios->power_mode) {
+	case MMC_POWER_UP:
+		if (host->pdata->glamo_can_set_mci_power()) {
+			mv = glamo_mci_get_mv(ios->vdd);
+			regulator_set_voltage(regulator, mv * 1000, mv * 1000);
+			regulator_enable(regulator);
+		}
+		break;
+	case MMC_POWER_ON:
+		/*
+		 * we should use very slow clock until first bulk
+		 * transfer completes OK
+		 */
+		host->force_slow_during_powerup = 1;
+
+		if (host->vdd_current != ios->vdd) {
+			if (host->pdata->glamo_can_set_mci_power()) {
+				mv = glamo_mci_get_mv(ios->vdd);
+				regulator_set_voltage(regulator, mv * 1000, mv * 1000);
+				printk(KERN_INFO "SD power -> %dmV\n", mv);
+			}
+			host->vdd_current = ios->vdd;
+		}
+		if (host->power_mode_current == MMC_POWER_OFF) {
+			glamo_engine_enable(glamo_mci_def_pdata.pglamo,
+							      GLAMO_ENGINE_MMC);
+			powering = 1;
+		}
+		break;
+
+	case MMC_POWER_OFF:
+	default:
+		if (host->power_mode_current == MMC_POWER_OFF)
+			break;
+		/* never want clocking with dead card */
+		__glamo_mci_fix_card_div(host, -1);
+
+		glamo_engine_disable(glamo_mci_def_pdata.pglamo,
+				     GLAMO_ENGINE_MMC);
+		regulator_disable(regulator);
+		host->vdd_current = -1;
+		break;
+	}
+	host->power_mode_current = ios->power_mode;
+
+	host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
+	host->clk_div = div;
+
+	/* after power-up, we are meant to give it >= 74 clocks so it can
+	 * initialize itself.  Doubt any modern cards need it but anyway...
+	 */
+	if (powering)
+		mdelay(1);
+
+	if (!sd_idleclk && !host->force_slow_during_powerup)
+		/* stop the clock to card, because we are idle until transfer */
+		__glamo_mci_fix_card_div(host, -1);
+
+	if ((ios->power_mode == MMC_POWER_ON) ||
+	    (ios->power_mode == MMC_POWER_UP)) {
+		dev_info(&host->pdev->dev,
+			"powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
+			"Bus width=%d\n",(int)ios->vdd,
+			host->real_rate / 1000, (int)host->clk_div,
+			ios->clock / 1000, (int)ios->bus_width);
+	} else
+		dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+
+	/* set bus width */
+	host->bus_width = ios->bus_width;
+	if (host->bus_width == MMC_BUS_WIDTH_4)
+		n = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+	writew((readw(host->base + GLAMO_REG_MMC_BASIC) &
+					  (~(GLAMO_BASIC_MMC_EN_4BIT_DATA |
+					     GLAMO_BASIC_MMC_EN_DR_STR0 |
+					     GLAMO_BASIC_MMC_EN_DR_STR1))) | n |
+			       sd_drive << 6, host->base + GLAMO_REG_MMC_BASIC);
+}
+
+
+/*
+ * no physical write protect supported by us
+ */
+static int glamo_mci_get_ro(struct mmc_host *mmc)
+{
+	return 0;
+}
+
+static struct mmc_host_ops glamo_mci_ops = {
+	.request	= glamo_mci_request,
+	.set_ios	= glamo_mci_set_ios,
+	.get_ro		= glamo_mci_get_ro,
+};
+
+static int glamo_mci_probe(struct platform_device *pdev)
+{
+	struct mmc_host 	*mmc;
+	struct glamo_mci_host 	*host;
+	int ret;
+
+	dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
+
+	mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	host->pdata = &glamo_mci_def_pdata;
+	host->power_mode_current = MMC_POWER_OFF;
+
+	host->complete_what = COMPLETION_NONE;
+	host->pio_active = XFER_NONE;
+
+	spin_lock_init(&host->complete_lock);
+	INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
+
+	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mem) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resouce.\n");
+
+		ret = -ENOENT;
+		goto probe_free_host;
+	}
+
+	host->mem = request_mem_region(host->mem->start,
+		RESSIZE(host->mem), pdev->name);
+
+	if (!host->mem) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_free_host;
+	}
+
+	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+	if (!host->base) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region;
+	}
+
+	host->regulator = regulator_get(&pdev->dev, "SD_3V3");
+	if (!host->regulator) {
+		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+		return -ENODEV;
+	}
+
+	/* set the handler for our bit of the shared chip irq register */
+	set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq);
+	/* stash host as our handler's private data */
+	set_irq_data(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
+
+	/* Get ahold of our data buffer we use for data in and out on MMC */
+	host->mem_data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!host->mem_data) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resource.\n");
+		ret = -ENOENT;
+		goto probe_iounmap;
+	}
+
+	host->mem_data = request_mem_region(host->mem_data->start,
+		RESSIZE(host->mem_data), pdev->name);
+
+	if (!host->mem_data) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_iounmap;
+	}
+	host->base_data = ioremap(host->mem_data->start,
+					  RESSIZE(host->mem_data));
+	host->data_max_size = RESSIZE(host->mem_data);
+
+	if (host->base_data == 0) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region_data;
+	}
+
+	host->vdd_current = 0;
+	host->clk_rate = 50000000; /* really it's 49152000 */
+	host->clk_div = 16;
+
+	/* explain our host controller capabilities */
+	mmc->ops 	= &glamo_mci_ops;
+	mmc->ocr_avail	= host->pdata->ocr_avail;
+	mmc->caps	= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_MMC_HIGHSPEED |
+			  MMC_CAP_SD_HIGHSPEED;
+	mmc->f_min 	= host->clk_rate / 256;
+	mmc->f_max 	= sd_max_clk;
+
+	mmc->max_blk_count	= (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+	mmc->max_blk_size	= (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+	mmc->max_req_size	= RESSIZE(host->mem_data) / 2;
+	mmc->max_seg_size	= mmc->max_req_size;
+	mmc->max_phys_segs	= 1; /* hw doesn't talk about segs??? */
+	mmc->max_hw_segs	= 1;
+
+	dev_info(&host->pdev->dev, "probe: mapped mci_base:%p irq:%u.\n",
+		host->base, host->irq);
+
+	platform_set_drvdata(pdev, mmc);
+
+	glamo_engine_enable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
+	glamo_mci_reset(host);
+
+	if ((ret = mmc_add_host(mmc))) {
+		dev_err(&pdev->dev, "failed to add mmc host.\n");
+		goto probe_free_mem_region_data;
+	}
+
+	dev_info(&pdev->dev,"initialisation done.\n");
+	return 0;
+
+ probe_free_mem_region_data:
+	release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
+
+ probe_iounmap:
+	iounmap(host->base);
+
+ probe_free_mem_region:
+	release_mem_region(host->mem->start, RESSIZE(host->mem));
+
+ probe_free_host:
+	mmc_free_host(mmc);
+ probe_out:
+	return ret;
+}
+
+static int glamo_mci_remove(struct platform_device *pdev)
+{
+	struct mmc_host 	*mmc  = platform_get_drvdata(pdev);
+	struct glamo_mci_host 	*host = mmc_priv(mmc);
+	struct regulator *regulator;
+
+	mmc_remove_host(mmc);
+	/* stop using our handler, revert it to default */
+	set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), handle_level_irq);
+	iounmap(host->base);
+	iounmap(host->base_data);
+	release_mem_region(host->mem->start, RESSIZE(host->mem));
+	release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
+
+	regulator = host->regulator;
+	regulator_put(regulator);
+	
+	mmc_free_host(mmc);
+
+	glamo_engine_disable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct glamo_mci_host 	*host = mmc_priv(mmc);
+	int ret;
+
+	cancel_work_sync(&host->irq_work);
+
+	/*
+	 * possible workaround for SD corruption during suspend - resume
+	 * make sure the clock was running during suspend and consequently
+	 * resume
+	 */
+	__glamo_mci_fix_card_div(host, host->clk_div);
+
+	/* we are going to do more commands to override this in
+	 * mmc_suspend_host(), so we need to change sd_idleclk for the
+	 * duration as well
+	 */
+	suspend_sd_idleclk = sd_idleclk;
+	sd_idleclk = 1;
+
+	ret = mmc_suspend_host(mmc, state);
+
+	host->suspending++;
+	/* so that when we resume, we use any modified max rate */
+	mmc->f_max = sd_max_clk;
+
+	return ret;
+}
+
+int glamo_mci_resume(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct glamo_mci_host 	*host = mmc_priv(mmc);
+	int ret;
+
+	sd_idleclk = 1;
+
+	glamo_engine_enable(host->pdata->pglamo, GLAMO_ENGINE_MMC);
+	glamo_mci_reset(host);
+
+	host->suspending--;
+
+	ret = mmc_resume_host(mmc);
+
+	/* put sd_idleclk back to pre-suspend state */
+	sd_idleclk = suspend_sd_idleclk;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_mci_resume);
+
+#else /* CONFIG_PM */
+#define glamo_mci_suspend NULL
+#define glamo_mci_resume NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver glamo_mci_driver =
+{
+	.driver.name	= "glamo-mci",
+	.probe		= glamo_mci_probe,
+	.remove		= glamo_mci_remove,
+	.suspend	= glamo_mci_suspend,
+	.resume		= glamo_mci_resume,
+};
+
+static int __init glamo_mci_init(void)
+{
+	spin_lock_init(&clock_lock);
+	platform_driver_register(&glamo_mci_driver);
+	return 0;
+}
+
+static void __exit glamo_mci_exit(void)
+{
+	platform_driver_unregister(&glamo_mci_driver);
+}
+
+module_init(glamo_mci_init);
+module_exit(glamo_mci_exit);
+
+MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h
new file mode 100644
index 0000000..daae7a3
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h
@@ -0,0 +1,84 @@
+/*
+ *  linux/drivers/mmc/host/glamo-mmc.h - GLAMO MCI driver
+ *
+ *  Copyright (C) 2007-2008 Openmoko, Inc, Andy Green <andy@openmoko.com>
+ *   based on S3C MMC driver -->
+ *  Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/regulator/consumer.h>
+
+enum glamo_mci_waitfor {
+	COMPLETION_NONE,
+	COMPLETION_FINALIZE,
+	COMPLETION_CMDSENT,
+	COMPLETION_RSPFIN,
+	COMPLETION_XFERFINISH,
+	COMPLETION_XFERFINISH_RSPFIN,
+};
+
+struct glamo_mci_host {
+	struct platform_device	*pdev;
+	struct glamo_mci_pdata  *pdata;
+	struct mmc_host		*mmc;
+	struct resource		*mem;
+	struct resource		*mem_data;
+	struct clk		*clk;
+	void __iomem		*base;
+	u16 __iomem		*base_data;
+	int			irq;
+	int			irq_cd;
+	int			dma;
+	int 			data_max_size;
+
+	int 			suspending;
+
+	int			power_mode_current;
+	unsigned int		vdd_current;
+
+	unsigned long		clk_rate;
+	unsigned long		clk_div;
+	unsigned long		real_rate;
+	u8			prescaler;
+
+	int			force_slow_during_powerup;
+
+	unsigned		sdiimsk;
+	int			dodma;
+
+	volatile int		dmatogo;
+
+	struct mmc_request	*mrq;
+	int			cmd_is_stop;
+	struct work_struct	irq_work;
+
+	spinlock_t		complete_lock;
+	volatile enum 		glamo_mci_waitfor
+				complete_what;
+
+	volatile int		dma_complete;
+
+	volatile u32		pio_sgptr;
+	volatile u32		pio_words;
+	volatile u32		pio_count;
+	volatile u16		*pio_ptr;
+#define XFER_NONE 0
+#define XFER_READ 1
+#define XFER_WRITE 2
+	volatile u32		pio_active;
+
+	int			bus_width;
+
+	char 			dbgmsg_cmd[301];
+	char 			dbgmsg_dat[301];
+	volatile char		*status;
+
+	unsigned int		ccnt, dcnt;
+	struct tasklet_struct	pio_tasklet;
+
+	struct regulator 	*regulator;
+};
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-regs.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-regs.h
new file mode 100644
index 0000000..2328b8a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-regs.h
@@ -0,0 +1,632 @@
+#ifndef _GLAMO_REGS_H
+#define _GLAMO_REGS_H
+
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+enum glamo_regster_offsets {
+	GLAMO_REGOFS_GENERIC	= 0x0000,
+	GLAMO_REGOFS_HOSTBUS	= 0x0200,
+	GLAMO_REGOFS_MEMORY	= 0x0300,
+	GLAMO_REGOFS_VIDCAP	= 0x0400,
+	GLAMO_REGOFS_ISP	= 0x0500,
+	GLAMO_REGOFS_JPEG	= 0x0800,
+	GLAMO_REGOFS_MPEG	= 0x0c00,
+	GLAMO_REGOFS_LCD	= 0x1100,
+	GLAMO_REGOFS_MMC	= 0x1400,
+	GLAMO_REGOFS_MPROC0	= 0x1500,
+	GLAMO_REGOFS_MPROC1	= 0x1580,
+	GLAMO_REGOFS_CMDQUEUE	= 0x1600,
+	GLAMO_REGOFS_RISC	= 0x1680,
+	GLAMO_REGOFS_2D		= 0x1700,
+	GLAMO_REGOFS_3D		= 0x1b00,
+	GLAMO_REGOFS_END	= 0x2400,
+};
+
+
+enum glamo_register_generic {
+	GLAMO_REG_GCONF1	= 0x0000,
+	GLAMO_REG_GCONF2	= 0x0002,
+#define	GLAMO_REG_DEVICE_ID	GLAMO_REG_GCONF2
+	GLAMO_REG_GCONF3	= 0x0004,
+#define	GLAMO_REG_REVISION_ID	GLAMO_REG_GCONF3
+	GLAMO_REG_IRQ_GEN1	= 0x0006,
+#define GLAMO_REG_IRQ_ENABLE	GLAMO_REG_IRQ_GEN1
+	GLAMO_REG_IRQ_GEN2	= 0x0008,
+#define GLAMO_REG_IRQ_SET	GLAMO_REG_IRQ_GEN2
+	GLAMO_REG_IRQ_GEN3	= 0x000a,
+#define GLAMO_REG_IRQ_CLEAR	GLAMO_REG_IRQ_GEN3
+	GLAMO_REG_IRQ_GEN4	= 0x000c,
+#define GLAMO_REG_IRQ_STATUS	GLAMO_REG_IRQ_GEN4
+	GLAMO_REG_CLOCK_HOST	= 0x0010,
+	GLAMO_REG_CLOCK_MEMORY	= 0x0012,
+	GLAMO_REG_CLOCK_LCD	= 0x0014,
+	GLAMO_REG_CLOCK_MMC	= 0x0016,
+	GLAMO_REG_CLOCK_ISP	= 0x0018,
+	GLAMO_REG_CLOCK_JPEG	= 0x001a,
+	GLAMO_REG_CLOCK_3D	= 0x001c,
+	GLAMO_REG_CLOCK_2D	= 0x001e,
+	GLAMO_REG_CLOCK_RISC1	= 0x0020,	/* 3365 only? */
+	GLAMO_REG_CLOCK_RISC2	= 0x0022,	/* 3365 only? */
+	GLAMO_REG_CLOCK_MPEG	= 0x0024,
+	GLAMO_REG_CLOCK_MPROC	= 0x0026,
+
+	GLAMO_REG_CLOCK_GEN5_1	= 0x0030,
+	GLAMO_REG_CLOCK_GEN5_2	= 0x0032,
+	GLAMO_REG_CLOCK_GEN6	= 0x0034,
+	GLAMO_REG_CLOCK_GEN7	= 0x0036,
+	GLAMO_REG_CLOCK_GEN8	= 0x0038,
+	GLAMO_REG_CLOCK_GEN9	= 0x003a,
+	GLAMO_REG_CLOCK_GEN10	= 0x003c,
+	GLAMO_REG_CLOCK_GEN11	= 0x003e,
+	GLAMO_REG_PLL_GEN1	= 0x0040,
+	GLAMO_REG_PLL_GEN2	= 0x0042,
+	GLAMO_REG_PLL_GEN3	= 0x0044,
+	GLAMO_REG_PLL_GEN4	= 0x0046,
+	GLAMO_REG_PLL_GEN5	= 0x0048,
+	GLAMO_REG_GPIO_GEN1	= 0x0050,
+	GLAMO_REG_GPIO_GEN2	= 0x0052,
+	GLAMO_REG_GPIO_GEN3	= 0x0054,
+	GLAMO_REG_GPIO_GEN4	= 0x0056,
+	GLAMO_REG_GPIO_GEN5	= 0x0058,
+	GLAMO_REG_GPIO_GEN6	= 0x005a,
+	GLAMO_REG_GPIO_GEN7	= 0x005c,
+	GLAMO_REG_GPIO_GEN8	= 0x005e,
+	GLAMO_REG_GPIO_GEN9	= 0x0060,
+	GLAMO_REG_GPIO_GEN10	= 0x0062,
+	GLAMO_REG_DFT_GEN1	= 0x0070,
+	GLAMO_REG_DFT_GEN2	= 0x0072,
+	GLAMO_REG_DFT_GEN3	= 0x0074,
+	GLAMO_REG_DFT_GEN4	= 0x0076,
+
+	GLAMO_REG_DFT_GEN5	= 0x01e0,
+	GLAMO_REG_DFT_GEN6	= 0x01f0,
+};
+
+#define GLAMO_REG_HOSTBUS(x)	(GLAMO_REGOFS_HOSTBUS-2+(x*2))
+
+#define REG_MEM(x)		(GLAMO_REGOFS_MEMORY+(x))
+#define GLAMO_REG_MEM_TIMING(x)	(GLAMO_REG_MEM_TIMING1-2+(x*2))
+
+enum glamo_register_mem {
+	GLAMO_REG_MEM_TYPE	= REG_MEM(0x00),
+	GLAMO_REG_MEM_GEN	= REG_MEM(0x02),
+	GLAMO_REG_MEM_TIMING1	= REG_MEM(0x04),
+	GLAMO_REG_MEM_TIMING2	= REG_MEM(0x06),
+	GLAMO_REG_MEM_TIMING3	= REG_MEM(0x08),
+	GLAMO_REG_MEM_TIMING4	= REG_MEM(0x0a),
+	GLAMO_REG_MEM_TIMING5	= REG_MEM(0x0c),
+	GLAMO_REG_MEM_TIMING6	= REG_MEM(0x0e),
+	GLAMO_REG_MEM_TIMING7	= REG_MEM(0x10),
+	GLAMO_REG_MEM_TIMING8	= REG_MEM(0x12),
+	GLAMO_REG_MEM_TIMING9	= REG_MEM(0x14),
+	GLAMO_REG_MEM_TIMING10	= REG_MEM(0x16),
+	GLAMO_REG_MEM_TIMING11	= REG_MEM(0x18),
+	GLAMO_REG_MEM_POWER1	= REG_MEM(0x1a),
+	GLAMO_REG_MEM_POWER2	= REG_MEM(0x1c),
+	GLAMO_REG_MEM_LCD_BUF1	= REG_MEM(0x1e),
+	GLAMO_REG_MEM_LCD_BUF2	= REG_MEM(0x20),
+	GLAMO_REG_MEM_LCD_BUF3	= REG_MEM(0x22),
+	GLAMO_REG_MEM_LCD_BUF4	= REG_MEM(0x24),
+	GLAMO_REG_MEM_BIST1	= REG_MEM(0x26),
+	GLAMO_REG_MEM_BIST2	= REG_MEM(0x28),
+	GLAMO_REG_MEM_BIST3	= REG_MEM(0x2a),
+	GLAMO_REG_MEM_BIST4	= REG_MEM(0x2c),
+	GLAMO_REG_MEM_BIST5	= REG_MEM(0x2e),
+	GLAMO_REG_MEM_MAH1	= REG_MEM(0x30),
+	GLAMO_REG_MEM_MAH2	= REG_MEM(0x32),
+	GLAMO_REG_MEM_DRAM1	= REG_MEM(0x34),
+	GLAMO_REG_MEM_DRAM2	= REG_MEM(0x36),
+	GLAMO_REG_MEM_CRC	= REG_MEM(0x38),
+};
+
+#define GLAMO_MEM_TYPE_MASK	0x03
+
+enum glamo_reg_mem_dram1 {
+	/* b0 - b10 == refresh period, 1 -> 2048 clocks */
+	GLAMO_MEM_DRAM1_EN_GATE_CLK	= (1 << 11),
+	GLAMO_MEM_DRAM1_SELF_REFRESH	= (1 << 12),
+	GLAMO_MEM_DRAM1_EN_GATE_CKE	= (1 << 13),
+	GLAMO_MEM_DRAM1_EN_DRAM_REFRESH	= (1 << 14),
+	GLAMO_MEM_DRAM1_EN_MODEREG_SET	= (1 << 15),
+};
+
+enum glamo_reg_mem_dram2 {
+	GLAMO_MEM_DRAM2_DEEP_PWRDOWN	= (1 << 12),
+};
+
+enum glamo_irq_index {
+	GLAMO_IRQIDX_HOSTBUS	= 0,
+	GLAMO_IRQIDX_JPEG	= 1,
+	GLAMO_IRQIDX_MPEG	= 2,
+	GLAMO_IRQIDX_MPROC1	= 3,
+	GLAMO_IRQIDX_MPROC0	= 4,
+	GLAMO_IRQIDX_CMDQUEUE	= 5,
+	GLAMO_IRQIDX_2D		= 6,
+	GLAMO_IRQIDX_MMC	= 7,
+	GLAMO_IRQIDX_RISC	= 8,
+};
+
+enum glamo_irq {
+	GLAMO_IRQ_HOSTBUS	= (1 << GLAMO_IRQIDX_HOSTBUS),
+	GLAMO_IRQ_JPEG		= (1 << GLAMO_IRQIDX_JPEG),
+	GLAMO_IRQ_MPEG		= (1 << GLAMO_IRQIDX_MPEG),
+	GLAMO_IRQ_MPROC1	= (1 << GLAMO_IRQIDX_MPROC1),
+	GLAMO_IRQ_MPROC0	= (1 << GLAMO_IRQIDX_MPROC0),
+	GLAMO_IRQ_CMDQUEUE	= (1 << GLAMO_IRQIDX_CMDQUEUE),
+	GLAMO_IRQ_2D		= (1 << GLAMO_IRQIDX_2D),
+	GLAMO_IRQ_MMC		= (1 << GLAMO_IRQIDX_MMC),
+	GLAMO_IRQ_RISC		= (1 << GLAMO_IRQIDX_RISC),
+};
+
+enum glamo_reg_clock_host {
+	GLAMO_CLOCK_HOST_DG_BCLK	= 0x0001,
+	GLAMO_CLOCK_HOST_DG_M0CLK	= 0x0004,
+	GLAMO_CLOCK_HOST_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mem {
+	GLAMO_CLOCK_MEM_DG_M1CLK	= 0x0001,
+	GLAMO_CLOCK_MEM_EN_M1CLK	= 0x0002,
+	GLAMO_CLOCK_MEM_DG_MOCACLK	= 0x0004,
+	GLAMO_CLOCK_MEM_EN_MOCACLK	= 0x0008,
+	GLAMO_CLOCK_MEM_RESET		= 0x1000,
+	GLAMO_CLOCK_MOCA_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_lcd {
+	GLAMO_CLOCK_LCD_DG_DCLK		= 0x0001,
+	GLAMO_CLOCK_LCD_EN_DCLK		= 0x0002,
+	GLAMO_CLOCK_LCD_DG_DMCLK	= 0x0004,
+	GLAMO_CLOCK_LCD_EN_DMCLK	= 0x0008,
+	//
+	GLAMO_CLOCK_LCD_EN_DHCLK	= 0x0020,
+	GLAMO_CLOCK_LCD_DG_M5CLK	= 0x0040,
+	GLAMO_CLOCK_LCD_EN_M5CLK	= 0x0080,
+	GLAMO_CLOCK_LCD_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mmc {
+	GLAMO_CLOCK_MMC_DG_TCLK		= 0x0001,
+	GLAMO_CLOCK_MMC_EN_TCLK		= 0x0002,
+	GLAMO_CLOCK_MMC_DG_M9CLK	= 0x0004,
+	GLAMO_CLOCK_MMC_EN_M9CLK	= 0x0008,
+	GLAMO_CLOCK_MMC_RESET		= 0x1000,
+};
+
+enum glamo_reg_basic_mmc {
+	/* set to disable CRC error rejection */
+	GLAMO_BASIC_MMC_DISABLE_CRC	= 0x0001,
+	/* enable completion interrupt */
+	GLAMO_BASIC_MMC_EN_COMPL_INT	= 0x0002,
+	/* stop MMC clock while enforced idle waiting for data from card */
+	GLAMO_BASIC_MMC_NO_CLK_RD_WAIT	= 0x0004,
+	/* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
+	GLAMO_BASIC_MMC_EN_4BIT_DATA	= 0x0008,
+	/* enable 75K pullups on D3..D0 */
+	GLAMO_BASIC_MMC_EN_DATA_PUPS	= 0x0010,
+	/* enable 75K pullup on CMD */
+	GLAMO_BASIC_MMC_EN_CMD_PUP	= 0x0020,
+	/* IO drive strength 00=weak -> 11=strongest */
+	GLAMO_BASIC_MMC_EN_DR_STR0	= 0x0040,
+	GLAMO_BASIC_MMC_EN_DR_STR1	= 0x0080,
+	/* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA0	= 0x0100,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA1	= 0x0200,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA2	= 0x0400,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA3	= 0x0800,
+	/* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB0	= 0x1000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB1	= 0x2000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB2	= 0x4000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB3	= 0x8000,
+};
+
+enum glamo_reg_stat1_mmc {
+	/* command "counter" (really: toggle) */
+	GLAMO_STAT1_MMC_CMD_CTR	= 0x8000,
+	/* engine is idle */
+	GLAMO_STAT1_MMC_IDLE	= 0x4000,
+	/* readback response is ready */
+	GLAMO_STAT1_MMC_RB_RRDY	= 0x0200,
+	/* readback data is ready */
+	GLAMO_STAT1_MMC_RB_DRDY	= 0x0100,
+	/* no response timeout */
+	GLAMO_STAT1_MMC_RTOUT	= 0x0020,
+	/* no data timeout */
+	GLAMO_STAT1_MMC_DTOUT	= 0x0010,
+	/* CRC error on block write */
+	GLAMO_STAT1_MMC_BWERR	= 0x0004,
+	/* CRC error on block read */
+	GLAMO_STAT1_MMC_BRERR	= 0x0002
+};
+
+enum glamo_reg_fire_mmc {
+	/* command "counter" (really: toggle)
+	 * the STAT1 register reflects this so you can ensure you don't look
+	 * at status for previous command
+	 */
+	GLAMO_FIRE_MMC_CMD_CTR	= 0x8000,
+	/* sets kind of response expected */
+	GLAMO_FIRE_MMC_RES_MASK	= 0x0700,
+	/* sets command type */
+	GLAMO_FIRE_MMC_TYP_MASK	= 0x00C0,
+	/* sets command class */
+	GLAMO_FIRE_MMC_CLS_MASK	= 0x000F,
+};
+
+enum glamo_fire_mmc_response_types {
+	GLAMO_FIRE_MMC_RSPT_R1	= 0x0000,
+	GLAMO_FIRE_MMC_RSPT_R1b	= 0x0100,
+	GLAMO_FIRE_MMC_RSPT_R2	= 0x0200,
+	GLAMO_FIRE_MMC_RSPT_R3	= 0x0300,
+	GLAMO_FIRE_MMC_RSPT_R4	= 0x0400,
+	GLAMO_FIRE_MMC_RSPT_R5	= 0x0500,
+};
+
+enum glamo_fire_mmc_command_types {
+	/* broadcast, no response */
+	GLAMO_FIRE_MMC_CMDT_BNR	= 0x0000,
+	/* broadcast, with response */
+	GLAMO_FIRE_MMC_CMDT_BR	= 0x0040,
+	/* addressed, no data */
+	GLAMO_FIRE_MMC_CMDT_AND	= 0x0080,
+	/* addressed, with data */
+	GLAMO_FIRE_MMC_CMDT_AD	= 0x00C0,
+};
+
+enum glamo_fire_mmc_command_class {
+	/* "Stream Read" */
+	GLAMO_FIRE_MMC_CC_STRR	= 0x0000,
+	/* Single Block Read */
+	GLAMO_FIRE_MMC_CC_SBR	= 0x0001,
+	/* Multiple Block Read With Stop */
+	GLAMO_FIRE_MMC_CC_MBRS	= 0x0002,
+	/* Multiple Block Read No Stop */
+	GLAMO_FIRE_MMC_CC_MBRNS	= 0x0003,
+	/* RESERVED for "Stream Write" */
+	GLAMO_FIRE_MMC_CC_STRW	= 0x0004,
+	/* "Stream Write" */
+	GLAMO_FIRE_MMC_CC_SBW	= 0x0005,
+	/* RESERVED for Multiple Block Write With Stop */
+	GLAMO_FIRE_MMC_CC_MBWS	= 0x0006,
+	/* Multiple Block Write No Stop */
+	GLAMO_FIRE_MMC_CC_MBWNS	= 0x0007,
+	/* STOP command */
+	GLAMO_FIRE_MMC_CC_STOP	= 0x0008,
+	/* Cancel on Running Command */
+	GLAMO_FIRE_MMC_CC_CANCL	= 0x0009,
+	/* "Basic Command" */
+	GLAMO_FIRE_MMC_CC_BASIC	= 0x000a,
+};
+
+/* these are offsets from the start of the MMC register region */
+enum glamo_register_mmc {
+	/* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
+	GLAMO_REG_MMC_CMD_REG1	= 0x00,
+	/* MMC command, b15..0 = cmd arg b23 .. 8 */
+	GLAMO_REG_MMC_CMD_REG2	= 0x02,
+	/* MMC command, b15=start, b14=transmission,
+	 * b13..8=cmd idx, b7..0=cmd arg b31..24
+	 */
+	GLAMO_REG_MMC_CMD_REG3	= 0x04,
+	GLAMO_REG_MMC_CMD_FIRE	= 0x06,
+	GLAMO_REG_MMC_CMD_RSP1	= 0x10,
+	GLAMO_REG_MMC_CMD_RSP2	= 0x12,
+	GLAMO_REG_MMC_CMD_RSP3	= 0x14,
+	GLAMO_REG_MMC_CMD_RSP4	= 0x16,
+	GLAMO_REG_MMC_CMD_RSP5	= 0x18,
+	GLAMO_REG_MMC_CMD_RSP6	= 0x1a,
+	GLAMO_REG_MMC_CMD_RSP7	= 0x1c,
+	GLAMO_REG_MMC_CMD_RSP8	= 0x1e,
+	GLAMO_REG_MMC_RB_STAT1	= 0x20,
+	GLAMO_REG_MMC_RB_BLKCNT	= 0x22,
+	GLAMO_REG_MMC_RB_BLKLEN	= 0x24,
+	GLAMO_REG_MMC_BASIC	= 0x30,
+	GLAMO_REG_MMC_RDATADS1	= 0x34,
+	GLAMO_REG_MMC_RDATADS2	= 0x36,
+	GLAMO_REG_MMC_WDATADS1	= 0x38,
+	GLAMO_REG_MMC_WDATADS2	= 0x3a,
+	GLAMO_REG_MMC_DATBLKCNT	= 0x3c,
+	GLAMO_REG_MMC_DATBLKLEN	= 0x3e,
+	GLAMO_REG_MMC_TIMEOUT	= 0x40,
+
+};
+
+enum glamo_reg_clock_isp {
+	GLAMO_CLOCK_ISP_DG_I1CLK	= 0x0001,
+	GLAMO_CLOCK_ISP_EN_I1CLK	= 0x0002,
+	GLAMO_CLOCK_ISP_DG_CCLK		= 0x0004,
+	GLAMO_CLOCK_ISP_EN_CCLK		= 0x0008,
+	//
+	GLAMO_CLOCK_ISP_EN_SCLK		= 0x0020,
+	GLAMO_CLOCK_ISP_DG_M2CLK	= 0x0040,
+	GLAMO_CLOCK_ISP_EN_M2CLK	= 0x0080,
+	GLAMO_CLOCK_ISP_DG_M15CLK	= 0x0100,
+	GLAMO_CLOCK_ISP_EN_M15CLK	= 0x0200,
+	GLAMO_CLOCK_ISP1_RESET		= 0x1000,
+	GLAMO_CLOCK_ISP2_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_jpeg {
+	GLAMO_CLOCK_JPEG_DG_JCLK	= 0x0001,
+	GLAMO_CLOCK_JPEG_EN_JCLK	= 0x0002,
+	GLAMO_CLOCK_JPEG_DG_M3CLK	= 0x0004,
+	GLAMO_CLOCK_JPEG_EN_M3CLK	= 0x0008,
+	GLAMO_CLOCK_JPEG_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_2d {
+	GLAMO_CLOCK_2D_DG_GCLK		= 0x0001,
+	GLAMO_CLOCK_2D_EN_GCLK		= 0x0002,
+	GLAMO_CLOCK_2D_DG_M7CLK		= 0x0004,
+	GLAMO_CLOCK_2D_EN_M7CLK		= 0x0008,
+	GLAMO_CLOCK_2D_DG_M6CLK		= 0x0010,
+	GLAMO_CLOCK_2D_EN_M6CLK		= 0x0020,
+	GLAMO_CLOCK_2D_RESET		= 0x1000,
+	GLAMO_CLOCK_2D_CQ_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_3d {
+	GLAMO_CLOCK_3D_DG_ECLK		= 0x0001,
+	GLAMO_CLOCK_3D_EN_ECLK		= 0x0002,
+	GLAMO_CLOCK_3D_DG_RCLK		= 0x0004,
+	GLAMO_CLOCK_3D_EN_RCLK		= 0x0008,
+	GLAMO_CLOCK_3D_DG_M8CLK		= 0x0010,
+	GLAMO_CLOCK_3D_EN_M8CLK		= 0x0020,
+	GLAMO_CLOCK_3D_BACK_RESET	= 0x1000,
+	GLAMO_CLOCK_3D_FRONT_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock_mpeg {
+	GLAMO_CLOCK_MPEG_DG_X0CLK	= 0x0001,
+	GLAMO_CLOCK_MPEG_EN_X0CLK	= 0x0002,
+	GLAMO_CLOCK_MPEG_DG_X1CLK	= 0x0004,
+	GLAMO_CLOCK_MPEG_EN_X1CLK	= 0x0008,
+	GLAMO_CLOCK_MPEG_DG_X2CLK	= 0x0010,
+	GLAMO_CLOCK_MPEG_EN_X2CLK	= 0x0020,
+	GLAMO_CLOCK_MPEG_DG_X3CLK	= 0x0040,
+	GLAMO_CLOCK_MPEG_EN_X3CLK	= 0x0080,
+	GLAMO_CLOCK_MPEG_DG_X4CLK	= 0x0100,
+	GLAMO_CLOCK_MPEG_EN_X4CLK	= 0x0200,
+	GLAMO_CLOCK_MPEG_DG_X6CLK	= 0x0400,
+	GLAMO_CLOCK_MPEG_EN_X6CLK	= 0x0800,
+	GLAMO_CLOCK_MPEG_ENC_RESET	= 0x1000,
+	GLAMO_CLOCK_MPEG_DEC_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock51 {
+	GLAMO_CLOCK_GEN51_EN_DIV_MCLK	= 0x0001,
+	GLAMO_CLOCK_GEN51_EN_DIV_SCLK	= 0x0002,
+	GLAMO_CLOCK_GEN51_EN_DIV_JCLK	= 0x0004,
+	GLAMO_CLOCK_GEN51_EN_DIV_DCLK	= 0x0008,
+	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK	= 0x0010,
+	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK	= 0x0020,
+	GLAMO_CLOCK_GEN51_EN_DIV_GCLK	= 0x0040,
+	GLAMO_CLOCK_GEN51_EN_DIV_TCLK	= 0x0080,
+	/* FIXME: higher bits */
+};
+
+enum glamo_reg_hostbus2 {
+	GLAMO_HOSTBUS2_MMIO_EN_ISP	= 0x0001,
+	GLAMO_HOSTBUS2_MMIO_EN_JPEG	= 0x0002,
+	GLAMO_HOSTBUS2_MMIO_EN_MPEG	= 0x0004,
+	GLAMO_HOSTBUS2_MMIO_EN_LCD	= 0x0008,
+	GLAMO_HOSTBUS2_MMIO_EN_MMC	= 0x0010,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP0	= 0x0020,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP1	= 0x0040,
+	GLAMO_HOSTBUS2_MMIO_EN_CQ	= 0x0080,
+	GLAMO_HOSTBUS2_MMIO_EN_RISC	= 0x0100,
+	GLAMO_HOSTBUS2_MMIO_EN_2D	= 0x0200,
+	GLAMO_HOSTBUS2_MMIO_EN_3D	= 0x0400,
+};
+
+/* LCD Controller */
+
+#define REG_LCD(x)	(x)
+enum glamo_reg_lcd {
+	GLAMO_REG_LCD_MODE1		= REG_LCD(0x00),
+	GLAMO_REG_LCD_MODE2		= REG_LCD(0x02),
+	GLAMO_REG_LCD_MODE3		= REG_LCD(0x04),
+	GLAMO_REG_LCD_WIDTH		= REG_LCD(0x06),
+	GLAMO_REG_LCD_HEIGHT		= REG_LCD(0x08),
+	GLAMO_REG_LCD_POLARITY		= REG_LCD(0x0a),
+	GLAMO_REG_LCD_A_BASE1		= REG_LCD(0x0c),
+	GLAMO_REG_LCD_A_BASE2		= REG_LCD(0x0e),
+	GLAMO_REG_LCD_B_BASE1		= REG_LCD(0x10),
+	GLAMO_REG_LCD_B_BASE2		= REG_LCD(0x12),
+	GLAMO_REG_LCD_C_BASE1		= REG_LCD(0x14),
+	GLAMO_REG_LCD_C_BASE2		= REG_LCD(0x16),
+	GLAMO_REG_LCD_PITCH		= REG_LCD(0x18),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_TOTAL	= REG_LCD(0x1c),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_START	= REG_LCD(0x20),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_END	= REG_LCD(0x24),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_START	= REG_LCD(0x28),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_END	= REG_LCD(0x2c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_TOTAL	= REG_LCD(0x30),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_START	= REG_LCD(0x34),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_END	= REG_LCD(0x38),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_START	= REG_LCD(0x3c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_END	= REG_LCD(0x40),
+	/* RES */
+	GLAMO_REG_LCD_POL		= REG_LCD(0x44),
+	GLAMO_REG_LCD_DATA_START	= REG_LCD(0x46),
+	GLAMO_REG_LCD_FRATE_CONTRO	= REG_LCD(0x48),
+	GLAMO_REG_LCD_DATA_CMD_HDR	= REG_LCD(0x4a),
+	GLAMO_REG_LCD_SP_START		= REG_LCD(0x4c),
+	GLAMO_REG_LCD_SP_END		= REG_LCD(0x4e),
+	GLAMO_REG_LCD_CURSOR_BASE1	= REG_LCD(0x50),
+	GLAMO_REG_LCD_CURSOR_BASE2	= REG_LCD(0x52),
+	GLAMO_REG_LCD_CURSOR_PITCH	= REG_LCD(0x54),
+	GLAMO_REG_LCD_CURSOR_X_SIZE	= REG_LCD(0x56),
+	GLAMO_REG_LCD_CURSOR_Y_SIZE	= REG_LCD(0x58),
+	GLAMO_REG_LCD_CURSOR_X_POS	= REG_LCD(0x5a),
+	GLAMO_REG_LCD_CURSOR_Y_POS	= REG_LCD(0x5c),
+	GLAMO_REG_LCD_CURSOR_PRESET	= REG_LCD(0x5e),
+	GLAMO_REG_LCD_CURSOR_FG_COLOR	= REG_LCD(0x60),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_BG_COLOR	= REG_LCD(0x64),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_DST_COLOR	= REG_LCD(0x68),
+	/* RES */
+	GLAMO_REG_LCD_STATUS1		= REG_LCD(0x80),
+	GLAMO_REG_LCD_STATUS2		= REG_LCD(0x82),
+	GLAMO_REG_LCD_STATUS3		= REG_LCD(0x84),
+	GLAMO_REG_LCD_STATUS4		= REG_LCD(0x86),
+	/* RES */
+	GLAMO_REG_LCD_COMMAND1		= REG_LCD(0xa0),
+	GLAMO_REG_LCD_COMMAND2		= REG_LCD(0xa2),
+	/* RES */
+	GLAMO_REG_LCD_WFORM_DELAY1	= REG_LCD(0xb0),
+	GLAMO_REG_LCD_WFORM_DELAY2	= REG_LCD(0xb2),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_CORR	= REG_LCD(0x100),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_R_ENTRY01	= REG_LCD(0x110),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY23	= REG_LCD(0x112),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY45	= REG_LCD(0x114),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY67	= REG_LCD(0x116),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY8	= REG_LCD(0x118),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_G_ENTRY01	= REG_LCD(0x130),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY23	= REG_LCD(0x132),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY45	= REG_LCD(0x134),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY67	= REG_LCD(0x136),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY8	= REG_LCD(0x138),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_B_ENTRY01	= REG_LCD(0x150),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY23	= REG_LCD(0x152),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY45	= REG_LCD(0x154),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY67	= REG_LCD(0x156),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY8	= REG_LCD(0x158),
+	/* RES */
+	GLAMO_REG_LCD_SRAM_DRIVING1	= REG_LCD(0x160),
+	GLAMO_REG_LCD_SRAM_DRIVING2	= REG_LCD(0x162),
+	GLAMO_REG_LCD_SRAM_DRIVING3	= REG_LCD(0x164),
+};
+
+enum glamo_reg_lcd_mode1 {
+	GLAMO_LCD_MODE1_PWRSAVE		= 0x0001,
+	GLAMO_LCD_MODE1_PARTIAL_PRT	= 0x0002,
+	GLAMO_LCD_MODE1_HWFLIP		= 0x0004,
+	GLAMO_LCD_MODE1_LCD2		= 0x0008,
+	/* RES */
+	GLAMO_LCD_MODE1_PARTIAL_MODE	= 0x0020,
+	GLAMO_LCD_MODE1_CURSOR_DSTCOLOR	= 0x0040,
+	GLAMO_LCD_MODE1_PARTIAL_ENABLE	= 0x0080,
+	GLAMO_LCD_MODE1_TVCLK_IN_ENABLE	= 0x0100,
+	GLAMO_LCD_MODE1_HSYNC_HIGH_ACT	= 0x0200,
+	GLAMO_LCD_MODE1_VSYNC_HIGH_ACT	= 0x0400,
+	GLAMO_LCD_MODE1_HSYNC_FLIP	= 0x0800,
+	GLAMO_LCD_MODE1_GAMMA_COR_EN	= 0x1000,
+	GLAMO_LCD_MODE1_DITHER_EN	= 0x2000,
+	GLAMO_LCD_MODE1_CURSOR_EN	= 0x4000,
+	GLAMO_LCD_MODE1_ROTATE_EN	= 0x8000,
+};
+
+enum glamo_reg_lcd_mode2 {
+	GLAMO_LCD_MODE2_CRC_CHECK_EN	= 0x0001,
+	GLAMO_LCD_MODE2_DCMD_PER_LINE	= 0x0002,
+	GLAMO_LCD_MODE2_NOUSE_BDEF	= 0x0004,
+	GLAMO_LCD_MODE2_OUT_POS_MODE	= 0x0008,
+	GLAMO_LCD_MODE2_FRATE_CTRL_EN	= 0x0010,
+	GLAMO_LCD_MODE2_SINGLE_BUFFER	= 0x0020,
+	GLAMO_LCD_MODE2_SER_LSB_TO_MSB	= 0x0040,
+	/* FIXME */
+};
+
+enum glamo_reg_lcd_mode3 {
+	/* LCD color source data format */
+	GLAMO_LCD_SRC_RGB565		= 0x0000,
+	GLAMO_LCD_SRC_ARGB1555		= 0x4000,
+	GLAMO_LCD_SRC_ARGB4444		= 0x8000,
+	/* interface type */
+	GLAMO_LCD_MODE3_LCD		= 0x1000,
+	GLAMO_LCD_MODE3_RGB		= 0x0800,
+	GLAMO_LCD_MODE3_CPU		= 0x0000,
+	/* mode */
+	GLAMO_LCD_MODE3_RGB332		= 0x0000,
+	GLAMO_LCD_MODE3_RGB444		= 0x0100,
+	GLAMO_LCD_MODE3_RGB565		= 0x0200,
+	GLAMO_LCD_MODE3_RGB666		= 0x0300,
+	/* depth */
+	GLAMO_LCD_MODE3_6BITS		= 0x0000,
+	GLAMO_LCD_MODE3_8BITS		= 0x0010,
+	GLAMO_LCD_MODE3_9BITS		= 0x0020,
+	GLAMO_LCD_MODE3_16BITS		= 0x0030,
+	GLAMO_LCD_MODE3_18BITS		= 0x0040,
+};
+
+enum glamo_lcd_rot_mode {
+        GLAMO_LCD_ROT_MODE_0            = 0x0000,
+        GLAMO_LCD_ROT_MODE_180          = 0x2000,
+        GLAMO_LCD_ROT_MODE_MIRROR       = 0x4000,
+        GLAMO_LCD_ROT_MODE_FLIP         = 0x6000,
+        GLAMO_LCD_ROT_MODE_90           = 0x8000,
+        GLAMO_LCD_ROT_MODE_270          = 0xa000,
+};
+#define GLAMO_LCD_ROT_MODE_MASK         0xe000
+
+enum glamo_lcd_cmd_type {
+	GLAMO_LCD_CMD_TYPE_DISP		= 0x0000,
+	GLAMO_LCD_CMD_TYPE_PARALLEL	= 0x4000,
+	GLAMO_LCD_CMD_TYPE_SERIAL	= 0x8000,
+	GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT= 0xc000,
+};
+#define GLAMO_LCD_CMD_TYPE_MASK		0xc000
+
+enum glamo_lcd_cmds {
+	GLAMO_LCD_CMD_DATA_DISP_FIRE	= 0x00,
+	GLAMO_LCD_CMD_DATA_DISP_SYNC	= 0x01,		/* RGB only */
+	/* switch to command mode, no display */
+	GLAMO_LCD_CMD_DATA_FIRE_NO_DISP	= 0x02,
+	/* display until VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC	= 0x11,
+	/* display until HSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_HSYNC	= 0x12,
+	/* display until VSYNC, 1 black frame, VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B	= 0x13,
+	/* don't care about display and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE	= 0x14,		/* RGB only */
+	/* don't care about display, keep data display but disable data,
+	 * and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE_D	= 0x15,		/* RGB only */
+};
+
+enum glamo_core_revisions {
+	GLAMO_CORE_REV_A0		= 0x0000,
+	GLAMO_CORE_REV_A1		= 0x0001,
+	GLAMO_CORE_REV_A2		= 0x0002,
+	GLAMO_CORE_REV_A3		= 0x0003,
+};
+
+#endif /* _GLAMO_REGS_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c
new file mode 100644
index 0000000..b92e48a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2007 Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Smedia Glamo GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver currently only implements a minimum subset of the hardware
+ * features, esp. those features that are required to drive the jbt6k74
+ * LCM controller asic in the TD028TTEC1 LCM.
+ *
+*/
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/glamo.h>
+
+#include <linux/glamofb.h>
+
+#include <mach/hardware.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_spigpio {
+	struct spi_bitbang		bitbang;
+	struct spi_master		*master;
+	struct glamo_spigpio_info	*info;
+	struct glamo_core		*glamo;
+};
+
+static inline struct glamo_spigpio *to_sg(struct spi_device *spi)
+{
+	return dev_get_drvdata(&spi->master->dev);
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	glamo_gpio_setpin(sg->glamo, sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	glamo_gpio_setpin(sg->glamo, sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	if (sg->info->pin_miso)
+		return glamo_gpio_getpin(sg->glamo, sg->info->pin_miso) ? 1 : 0;
+	else
+		return 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 glamo_spigpio_txrx_mode0(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode1(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode2(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode3(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+
+#if 0
+static int glamo_spigpio_setupxfer(struct spi_device *spi,
+				   struct spi_transfer *t)
+{
+	struct glamo_spi *gs = to_sg(spi);
+	unsigned int bpw;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+
+	if (bpw != 9 && bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#endif
+
+static void glamo_spigpio_chipsel(struct spi_device *spi, int value)
+{
+	struct glamo_spigpio *gs = to_sg(spi);
+#if 0
+	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
+		value, spi, gs, gs->info, gs->info->glamo);
+#endif
+	glamo_gpio_setpin(gs->glamo, gs->info->pin_cs, value ? 0 : 1);
+}
+
+
+static int glamo_spigpio_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct glamo_spigpio *sp;
+	int ret;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spigpio));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+	sp->info = pdev->dev.platform_data;
+	if (!sp->info) {
+		dev_err(&pdev->dev, "can't operate without platform data\n");
+		ret = -EIO;
+		goto err_no_pdev;
+	}
+
+	master->num_chipselect = 1;
+	master->bus_num = 2; /* FIXME: use dynamic number */
+
+	sp->master = spi_master_get(master);
+	sp->glamo = sp->info->glamo;
+
+	sp->bitbang.master = sp->master;
+	sp->bitbang.chipselect = glamo_spigpio_chipsel;
+	sp->bitbang.txrx_word[SPI_MODE_0] = glamo_spigpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = glamo_spigpio_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = glamo_spigpio_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3;
+
+	/* set state of spi pins */
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1);
+
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs);
+	if (sp->info->pin_miso)
+		glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso);
+
+	/* bring the LCM panel out of reset if it isn't already */
+
+	glamo_gpio_setpin(sp->glamo, GLAMO_GPIO4, 1);
+	glamo_gpio_cfgpin(sp->glamo, GLAMO_GPIO4_OUTPUT);
+	msleep(90);
+
+#if 0
+	sp->dev = &pdev->dev;
+
+	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
+	sp->bitbang.txrx_bufs = glamo_spi_txrx;
+	sp->bitbang.master->setup = glamo_spi_setup;
+#endif
+
+	dev_set_drvdata(&sp->master->dev, sp);
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	return 0;
+
+err_no_bitbang:
+	platform_set_drvdata(pdev, NULL);
+err_no_pdev:
+	spi_master_put(sp->bitbang.master);
+err:
+	return ret;
+
+}
+
+static int glamo_spigpio_remove(struct platform_device *pdev)
+{
+	struct glamo_spigpio *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+/*#define glamo_spigpio_suspend NULL
+#define glamo_spigpio_resume NULL
+*/
+
+
+#ifdef CONFIG_PM
+static int glamo_spigpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return 0;
+}
+
+static int glamo_spigpio_resume(struct platform_device *pdev)
+{
+	struct glamo_spigpio *sp = platform_get_drvdata(pdev);
+
+	if (!sp)
+		return 0;
+
+	/* set state of spi pins */
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1);
+
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs);
+	if (sp->info->pin_miso)
+		glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso);
+
+	return 0;
+}
+#endif
+
+static struct platform_driver glamo_spi_drv = {
+	.probe		= glamo_spigpio_probe,
+	.remove		= glamo_spigpio_remove,
+#ifdef CONFIG_PM
+	.suspend_late	= glamo_spigpio_suspend,
+	.resume_early	= glamo_spigpio_resume,
+#endif
+	.driver		= {
+		.name	= "glamo-spi-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init glamo_spi_init(void)
+{
+	return platform_driver_register(&glamo_spi_drv);
+}
+
+static void __exit glamo_spi_exit(void)
+{
+	platform_driver_unregister(&glamo_spi_drv);
+}
+
+module_init(glamo_spi_init);
+module_exit(glamo_spi_exit);
+
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_host.c b/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_host.c
new file mode 100644
index 0000000..ad7cfd8
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_host.c
@@ -0,0 +1,97 @@
+/*
+ * Bluetooth PM code for the FIC gta02 GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+static ssize_t pm_host_read(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "%d\n",
+		       pcf50633_gpio_get(gta02_pcf, PCF50633_GPO)
+		       				== PCF50633_GPOCFG_GPOSEL_1);
+}
+
+static ssize_t pm_host_write(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+	u8 val;
+
+	if (on)
+		val = PCF50633_GPOCFG_GPOSEL_1;
+	else
+		val = PCF50633_GPOCFG_GPOSEL_0;
+
+
+	pcf50633_gpio_set(gta02_pcf, PCF50633_GPO, val);
+
+	return count;
+}
+
+static DEVICE_ATTR(hostmode, 0644, pm_host_read, pm_host_write);
+
+static struct attribute *gta02_pm_host_sysfs_entries[] = {
+	&dev_attr_hostmode.attr,
+	NULL
+};
+
+static struct attribute_group gta02_pm_host_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_pm_host_sysfs_entries,
+};
+
+static int __init gta02_pm_host_probe(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "starting\n");
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_pm_host_attr_group);
+}
+
+static int gta02_pm_host_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_pm_host_attr_group);
+	return 0;
+}
+
+static struct platform_driver gta02_pm_host_driver = {
+	.probe		= gta02_pm_host_probe,
+	.remove		= gta02_pm_host_remove,
+	.driver		= {
+		.name		= "gta02-pm-host",
+	},
+};
+
+static int __devinit gta02_pm_host_init(void)
+{
+	return platform_driver_register(&gta02_pm_host_driver);
+}
+
+static void gta02_pm_host_exit(void)
+{
+	platform_driver_unregister(&gta02_pm_host_driver);
+}
+
+module_init(gta02_pm_host_init);
+module_exit(gta02_pm_host_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko Freerunner USB Host Power Management");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_resume_reason.c b/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_resume_reason.c
new file mode 100644
index 0000000..3820d7c
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/misc/gta02_pm_resume_reason.c
@@ -0,0 +1,118 @@
+/*
+ * Resume reason sysfs for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2008 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License resume_reason 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/regs-gpio.h>
+
+static unsigned int *gstatus4_mapped;
+static char *resume_reasons[17] = {
+	"EINT00_ACCEL1",
+	"EINT01_GSM",
+	"EINT02_BLUETOOTH",
+	"EINT03_DEBUGBRD",
+	"EINT04_JACK",
+	"EINT05_WLAN",
+	"EINT06_AUXKEY",
+	"EINT07_HOLDKEY",
+	"EINT08_ACCEL2",
+	"EINT09_PMU",
+	"EINT10_NULL",
+	"EINT11_NULL",
+	"EINT12_GLAMO",
+	"EINT13_NULL",
+	"EINT14_NULL",
+	"EINT15_NULL",
+	NULL
+};
+
+static ssize_t resume_reason_read(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	int bit = 0;
+	char *end = buf;
+
+	for (bit = 0; resume_reasons[bit]; bit++) {
+		if ((*gstatus4_mapped) & (1 << bit))
+			end += sprintf(end, "* %s\n", resume_reasons[bit]);
+		else
+			end += sprintf(end, "  %s\n", resume_reasons[bit]);
+
+	}
+
+	return end - buf;
+}
+
+
+static DEVICE_ATTR(resume_reason, 0644, resume_reason_read, NULL);
+
+static struct attribute *gta02_resume_reason_sysfs_entries[] = {
+	&dev_attr_resume_reason.attr,
+	NULL
+};
+
+static struct attribute_group gta02_resume_reason_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_resume_reason_sysfs_entries,
+};
+
+static int __init gta02_resume_reason_probe(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "starting\n");
+
+	gstatus4_mapped = ioremap(S3C24XX_GSTATUS4, 0x4);
+	if (!gstatus4_mapped) {
+		dev_err(&pdev->dev, "failed to ioremap() memory region\n");
+		return -EINVAL;
+	}
+
+	return sysfs_create_group(&pdev->dev.kobj,
+					    &gta02_resume_reason_attr_group);
+}
+
+static int gta02_resume_reason_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_resume_reason_attr_group);
+	iounmap(gstatus4_mapped);
+	return 0;
+}
+
+static struct platform_driver gta02_resume_reason_driver = {
+	.probe		= gta02_resume_reason_probe,
+	.remove		= gta02_resume_reason_remove,
+	.driver		= {
+		.name		= "gta02-resume-reason",
+	},
+};
+
+static int __devinit gta02_resume_reason_init(void)
+{
+	return platform_driver_register(&gta02_resume_reason_driver);
+}
+
+static void gta02_resume_reason_exit(void)
+{
+	platform_driver_unregister(&gta02_resume_reason_driver);
+}
+
+module_init(gta02_resume_reason_init);
+module_exit(gta02_resume_reason_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("GTA02 resume_reason");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/power/bq27000_battery.c b/target/linux/s3c24xx/files-2.6.30/drivers/power/bq27000_battery.c
new file mode 100644
index 0000000..32655dc
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/power/bq27000_battery.c
@@ -0,0 +1,477 @@
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ *	       2004-2007 Matt Reimer
+ *	       2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author:  Anton Vorontsov <cbou@mail.ru>
+ *	    February 2007
+ *
+ *	    Matt Reimer <mreimer@vpop.net>
+ *	    April 2004, 2005, 2007
+ *
+ *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *	    September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+	/* RAM regs */
+		/* read-write after this */
+	BQ27000_CTRL = 0, /* Device Control Register */
+	BQ27000_MODE, /* Device Mode Register */
+	BQ27000_AR_L, /* At-Rate H L */
+	BQ27000_AR_H,
+		/* read-only after this */
+	BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+	BQ27000_ARTTE_H,
+	BQ27000_TEMP_L, /* Reported Temperature H L */
+	BQ27000_TEMP_H,
+	BQ27000_VOLT_L, /* Reported Voltage H L */
+	BQ27000_VOLT_H,
+	BQ27000_FLAGS, /* Status Flags */
+	BQ27000_RSOC, /* Relative State of Charge */
+	BQ27000_NAC_L, /* Nominal Available Capacity H L */
+	BQ27000_NAC_H,
+	BQ27000_CACD_L, /* Discharge Compensated H L */
+	BQ27000_CACD_H,
+	BQ27000_CACT_L, /* Temperature Compensated H L */
+	BQ27000_CACT_H,
+	BQ27000_LMD_L, /* Last measured discharge H L */
+	BQ27000_LMD_H,
+	BQ27000_AI_L, /* Average Current H L */
+	BQ27000_AI_H,
+	BQ27000_TTE_L, /* Time to Empty H L */
+	BQ27000_TTE_H,
+	BQ27000_TTF_L, /* Time to Full H L */
+	BQ27000_TTF_H,
+	BQ27000_SI_L, /* Standby Current H L */
+	BQ27000_SI_H,
+	BQ27000_STTE_L, /* Standby Time To Empty H L */
+	BQ27000_STTE_H,
+	BQ27000_MLI_L, /* Max Load Current H L */
+	BQ27000_MLI_H,
+	BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+	BQ27000_MLTTE_H,
+	BQ27000_SAE_L, /* Available Energy H L */
+	BQ27000_SAE_H,
+	BQ27000_AP_L, /* Available Power H L */
+	BQ27000_AP_H,
+	BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+	BQ27000_TTECP_H,
+	BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+	BQ27000_CYCL_H,
+	BQ27000_CYCT_L, /* Cycle Count Total H L */
+	BQ27000_CYCT_H,
+	BQ27000_CSOC, /* Compensated State Of Charge */
+	/* EEPROM regs */
+		/* read-write after this */
+	BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+	BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+	BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+	BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+	BQ27000_EE_ISLC, /* Initial Standby Load Current */
+	BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+	BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+	BQ27000_EE_PKCFG, /* Pack Configuration Values */
+	BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+	BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+	BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+	BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+	BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+	BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+	BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely  innacurate */
+	BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+	BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+	BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+	BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_bat_regs {
+	int		ai;
+	int		flags;
+	int		lmd;
+	int		rsoc;
+	int		temp;
+	int		tte;
+	int		ttf;
+	int		volt;
+};
+
+struct bq27000_device_info {
+	struct device *dev;
+	struct power_supply bat;
+	struct power_supply ac;
+	struct power_supply usb;
+	struct delayed_work work;
+	struct bq27000_platform_data *pdata;
+
+	struct bq27000_bat_regs regs;
+};
+
+static unsigned int cache_time = 5000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves.  TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+	int acc;
+	int high;
+	int retries = 3;
+
+	while (retries--) {
+
+		high = (di->pdata->hdq_read)(address + 1); /* high part */
+
+		if (high < 0)
+			return high;
+		acc = (di->pdata->hdq_read)(address);
+		if (acc < 0)
+			return acc;
+
+		/* confirm high didn't change between reading it and low */
+		if (high == (di->pdata->hdq_read)(address + 1))
+			return (high << 8) | acc;
+	}
+
+	return -ETIME;
+}
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+	struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+	schedule_delayed_work(&di->work, 0);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	int n;
+	struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+	if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+		if (!di->pdata->get_charger_online_status)
+			goto use_bat;
+		if ((di->pdata->get_charger_online_status)()) {
+			/*
+			 * charger is definitively present
+			 * we report our state in terms of what it says it
+			 * is doing
+			 */
+			if (!di->pdata->get_charger_active_status)
+				goto use_bat;
+
+			if ((di->pdata->get_charger_active_status)()) {
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+				break;
+			}
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+
+		/*
+		 * platform provided definite indication of charger presence,
+		 * and it is telling us it isn't there... but we are on so we
+		 * must be running from battery --->
+		 */
+
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+
+use_bat:
+		/*
+		 * either the charger is not connected, or the
+		 * platform doesn't give info about charger, use battery state
+		 * but... battery state can be out of date by 4 seconds or
+		 * so... use the platform callbacks if possible.
+		 */
+
+		/* no real activity on the battery */
+		if (di->regs.ai < 2) {
+			if (!di->regs.ttf)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		/* power is actually going in or out... */
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_CHGS)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		/* Do we have accurate readings... */
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_VDQ)
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (di->regs.volt < 0)
+			return di->regs.volt;
+		/* mV -> uV */
+		val->intval = di->regs.volt * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_CHGS)
+			n = -NANOVOLTS_UNIT;
+		else
+			n = NANOVOLTS_UNIT;
+		if (di->regs.ai < 0)
+			return di->regs.ai;
+		val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		if (di->regs.lmd < 0)
+			return di->regs.lmd;
+		val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (di->regs.temp < 0)
+			return di->regs.temp;
+		/* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+		/* 10926 = 27315 * 4 / 10 */
+		val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = di->regs.rsoc;
+		if (val->intval < 0)
+			return val->intval;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !(di->regs.rsoc < 0);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		if (di->regs.tte < 0)
+			return di->regs.tte;
+		val->intval = 60 * di->regs.tte;
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		if (di->regs.ttf < 0)
+			return di->regs.ttf;
+		val->intval = 60 * di->regs.ttf;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (di->pdata->get_charger_online_status)
+			val->intval = (di->pdata->get_charger_online_status)();
+		else
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void bq27000_battery_work(struct work_struct *work)
+{
+	struct bq27000_device_info *di =
+		container_of(work, struct bq27000_device_info, work.work);
+
+	if ((di->pdata->hdq_initialized)()) {
+		struct bq27000_bat_regs regs;
+
+		regs.ai    = hdq_read16(di, BQ27000_AI_L);
+		regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
+		regs.lmd   = hdq_read16(di, BQ27000_LMD_L);
+		regs.rsoc  = (di->pdata->hdq_read)(BQ27000_RSOC);
+		regs.temp  = hdq_read16(di, BQ27000_TEMP_L);
+		regs.tte   = hdq_read16(di, BQ27000_TTE_L);
+		regs.ttf   = hdq_read16(di, BQ27000_TTF_L);
+		regs.volt  = hdq_read16(di, BQ27000_VOLT_L);
+
+		if (memcmp (&regs, &di->regs, sizeof(regs)) != 0) {
+			di->regs = regs;
+			power_supply_changed(&di->bat);
+		}
+	}
+
+	if (!schedule_delayed_work(&di->work, cache_time))
+		dev_err(di->dev, "battery service reschedule failed\n");
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_ONLINE
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+	int retval = 0;
+	struct bq27000_device_info *di;
+	struct bq27000_platform_data *pdata;
+
+	dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+	di = kzalloc(sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		retval = -ENOMEM;
+		goto di_alloc_failed;
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	pdata = pdev->dev.platform_data;
+	di->dev		= &pdev->dev;
+	/* di->w1_dev	     = pdev->dev.parent; */
+	di->bat.name	   = pdata->name;
+	di->bat.type	   = POWER_SUPPLY_TYPE_BATTERY;
+	di->bat.properties     = bq27000_battery_props;
+	di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+	di->bat.get_property   = bq27000_battery_get_property;
+	di->bat.external_power_changed =
+				  bq27000_battery_external_power_changed;
+	di->bat.use_for_apm = 1;
+	di->pdata = pdata;
+
+	retval = power_supply_register(&pdev->dev, &di->bat);
+	if (retval) {
+		dev_err(di->dev, "failed to register battery\n");
+		goto batt_failed;
+	}
+
+	INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
+
+	if (!schedule_delayed_work(&di->work, 0))
+		dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
+
+	return 0;
+
+batt_failed:
+	kfree(di);
+di_alloc_failed:
+	return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_delayed_work(&di->work);
+
+	power_supply_unregister(&di->bat);
+
+	return 0;
+}
+
+void bq27000_charging_state_change(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	if (!di)
+	    return;
+}
+EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_delayed_work(&di->work);
+	return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	schedule_delayed_work(&di->work, 0);
+	return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+	.driver = {
+		.name = "bq27000-battery",
+	},
+	.probe	  = bq27000_battery_probe,
+	.remove   = bq27000_battery_remove,
+	.suspend  = bq27000_battery_suspend,
+	.resume	  = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+	return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+	platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/power/hdq.c b/target/linux/s3c24xx/files-2.6.30/drivers/power/hdq.c
new file mode 100644
index 0000000..f03fabf
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/power/hdq.c
@@ -0,0 +1,515 @@
+/*
+ * HDQ generic GPIO bitbang driver using FIQ
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/hdq.h>
+
+#define HDQ_READ 0
+#define HDQ_WRITE 0x80
+
+enum hdq_bitbang_states {
+	HDQB_IDLE = 0,
+	HDQB_TX_BREAK,
+	HDQB_TX_BREAK_RECOVERY,
+	HDQB_ADS_CALC,
+	HDQB_ADS_LOW,
+	HDQB_ADS_HIGH,
+	HDQB_WAIT_RX,
+	HDQB_DATA_RX_LOW,
+	HDQB_DATA_RX_HIGH,
+	HDQB_WAIT_TX,
+};
+
+static struct hdq_priv {
+	u8 hdq_probed; /* nonzero after HDQ driver probed */
+	struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
+	unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
+	u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
+	u8 hdq_tx_data; /* data to tx for write action */
+	u8 hdq_rx_data; /* data received in read action */
+	u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
+	u8 hdq_transaction_ctr; /* incremented after each transfer */
+	u8 hdq_error; /* 0 = no error */
+	u8 hdq_ctr;
+	u8 hdq_ctr2;
+	u8 hdq_bit;
+	u8 hdq_shifter;
+	u8 hdq_tx_data_done;
+	enum hdq_bitbang_states hdq_state;
+	int reported_error;
+
+	struct hdq_platform_data *pdata;
+} hdq_priv;
+
+
+static void hdq_bad(void)
+{
+	if (!hdq_priv.reported_error)
+		printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
+	hdq_priv.reported_error = 1;
+}
+
+static void hdq_good(void)
+{
+	if (hdq_priv.reported_error)
+		printk(KERN_INFO "HDQ responds again\n");
+	hdq_priv.reported_error = 0;
+}
+
+int hdq_fiq_handler(void)
+{
+	if (!hdq_priv.hdq_probed)
+		return 0;
+
+	switch (hdq_priv.hdq_state) {
+	case HDQB_IDLE:
+		if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
+			break;
+		hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.pdata->gpio_set(0);
+		hdq_priv.pdata->gpio_dir_out();
+		hdq_priv.hdq_tx_data_done = 0;
+		hdq_priv.hdq_state = HDQB_TX_BREAK;
+		break;
+
+	case HDQB_TX_BREAK: /* issue low for > 190us */
+		if (--hdq_priv.hdq_ctr == 0) {
+			hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
+			hdq_priv.pdata->gpio_set(1);
+		}
+		break;
+
+	case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
+		if (--hdq_priv.hdq_ctr)
+			break;
+		hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
+		hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
+		hdq_priv.hdq_tx_data_done = 0; /* doing ads */
+		/* fallthru on last one */
+	case HDQB_ADS_CALC:
+		if (hdq_priv.hdq_shifter & 1)
+			hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
+		else
+			hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
+		/* carefully precompute the other phase length */
+		hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
+				HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.hdq_state = HDQB_ADS_LOW;
+		hdq_priv.hdq_shifter >>= 1;
+		hdq_priv.hdq_bit--;
+		hdq_priv.pdata->gpio_set(0);
+		break;
+
+	case HDQB_ADS_LOW:
+		if (--hdq_priv.hdq_ctr)
+			break;
+		hdq_priv.pdata->gpio_set(1);
+		hdq_priv.hdq_state = HDQB_ADS_HIGH;
+		break;
+
+	case HDQB_ADS_HIGH:
+		if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
+			break;
+		if (hdq_priv.hdq_bit) { /* more bits to do */
+			hdq_priv.hdq_state = HDQB_ADS_CALC;
+			break;
+		}
+		/* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */
+		if (hdq_priv.hdq_ctr2)
+			break;
+		/* ok no more bits and very last state */
+		hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+		/* FIXME 0 = read */
+		if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
+			 /* set delay before payload */
+			hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+ 			/* already high, no need to write */
+			hdq_priv.hdq_state = HDQB_WAIT_TX;
+			break;
+		}
+		/* read the next byte */
+		hdq_priv.hdq_bit = 8; /* 8 bits of data */
+		hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.hdq_state = HDQB_WAIT_RX;
+		hdq_priv.pdata->gpio_dir_in();
+		break;
+
+	case HDQB_WAIT_TX: /* issue low for > 40us */
+		if (--hdq_priv.hdq_ctr)
+			break;
+		if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
+			hdq_priv.hdq_tx_data_done++;
+			hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
+			hdq_priv.hdq_bit = 8; /* 8 bits of data */
+			hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
+			break;
+		}
+		hdq_priv.hdq_error = 0;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+		hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
+		/* idle in input mode, it's pulled up by 10K */
+		hdq_priv.pdata->gpio_dir_in();
+		break;
+
+	case HDQB_WAIT_RX: /* wait for battery to talk to us */
+		if (hdq_priv.pdata->gpio_get() == 0) {
+			/* it talks to us! */
+			hdq_priv.hdq_ctr2 = 1;
+			hdq_priv.hdq_bit = 8; /* 8 bits of data */
+			/* timeout */
+			hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
+			hdq_priv.hdq_error = 1;
+			hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+			hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		}
+		break;
+
+	/*
+	 * HDQ basically works by measuring the low time of the bit cell
+	 * 32-50us --> '1', 80 - 145us --> '0'
+	 */
+
+	case HDQB_DATA_RX_LOW:
+		if (hdq_priv.pdata->gpio_get()) {
+			hdq_priv.hdq_rx_data >>= 1;
+			if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
+				hdq_priv.hdq_rx_data |= 0x80;
+
+			if (--hdq_priv.hdq_bit == 0) {
+				hdq_priv.hdq_error = 0;
+				hdq_priv.hdq_transaction_ctr =
+							hdq_priv.hdq_request_ctr;
+
+				hdq_priv.hdq_state = HDQB_IDLE;
+			} else
+				hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
+			/* timeout */
+			hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_ctr2 = 1;
+			break;
+		}
+		hdq_priv.hdq_ctr2++;
+		if (--hdq_priv.hdq_ctr)
+			break;
+		 /* timed out, error */
+		hdq_priv.hdq_error = 2;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		break;
+
+	case HDQB_DATA_RX_HIGH:
+		if (!hdq_priv.pdata->gpio_get()) {
+			/* it talks to us! */
+			hdq_priv.hdq_ctr2 = 1;
+			/* timeout */
+			hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_priv.hdq_ctr)
+			break;
+		/* timed out, error */
+		hdq_priv.hdq_error = 3;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+
+		/* we're in input mode already */
+		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		break;
+	}
+
+	/* Are we interested in keeping the FIQ source alive ? */
+	if (hdq_priv.hdq_state != HDQB_IDLE)
+		return 1;
+	else
+		return 0;
+}
+static int fiq_busy(void)
+{
+	int request = (volatile u8)hdq_priv.hdq_request_ctr;
+	int transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
+
+
+	return (request != transact);
+}
+
+int hdq_initialized(void)
+{
+	return hdq_priv.hdq_probed;
+}
+EXPORT_SYMBOL_GPL(hdq_initialized);
+
+int hdq_read(int address)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	mutex_lock(&hdq_priv.hdq_lock);
+
+	hdq_priv.hdq_error = 0;
+	hdq_priv.hdq_ads = address | HDQ_READ;
+	hdq_priv.hdq_request_ctr++;
+	hdq_priv.pdata->kick_fiq();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_busy())
+			continue;
+
+		if (hdq_priv.hdq_error) {
+			hdq_bad();
+			goto done; /* didn't see a response in good time */
+		}
+		hdq_good();
+
+		ret = hdq_priv.hdq_rx_data;
+		goto done;
+	}
+
+done:
+	mutex_unlock(&hdq_priv.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_read);
+
+int hdq_write(int address, u8 data)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	mutex_lock(&hdq_priv.hdq_lock);
+
+	hdq_priv.hdq_error = 0;
+	hdq_priv.hdq_ads = address | HDQ_WRITE;
+	hdq_priv.hdq_tx_data = data;
+	hdq_priv.hdq_request_ctr++;
+	hdq_priv.pdata->kick_fiq();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_busy())
+			continue; /* something bad with FIQ */
+
+		if (hdq_priv.hdq_error) {
+			hdq_bad();
+			goto done; /* didn't see a response in good time */
+		}
+		hdq_good();
+
+		ret = 0;
+		goto done;
+	}
+
+done:
+	mutex_unlock(&hdq_priv.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_write);
+
+/* sysfs */
+
+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int n;
+	int v;
+	u8 u8a[128]; /* whole address space for HDQ */
+	char *end = buf;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	/* the dump does not take care about 16 bit regs, because at this
+	 * bus level we don't know about the chip details
+	 */
+	for (n = 0; n < sizeof(u8a); n++) {
+		v = hdq_read(n);
+		if (v < 0)
+			goto bail;
+		u8a[n] = v;
+	}
+
+	for (n = 0; n < sizeof(u8a); n += 16) {
+		hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end = '\0';
+	}
+	return (end - buf);
+
+bail:
+	return sprintf(buf, "ERROR %d\n", v);
+}
+
+/* you write by <address> <data>, eg, "34 128" */
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static ssize_t hdq_sysfs_write(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	const char *end = buf + count;
+	int address = atoi(buf);
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	while ((buf != end) && (*buf != ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+	while ((buf < end) && (*buf == ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+
+	hdq_write(address, atoi(buf));
+
+	return count;
+}
+
+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
+
+static struct attribute *hdq_sysfs_entries[] = {
+	&dev_attr_dump.attr,
+	&dev_attr_write.attr,
+	NULL
+};
+
+static struct attribute_group hdq_attr_group = {
+	.name	= "hdq",
+	.attrs	= hdq_sysfs_entries,
+};
+
+
+#ifdef CONFIG_PM
+static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* after 18s of this, the battery monitor will also go to sleep */
+	hdq_priv.pdata->gpio_dir_in();
+	hdq_priv.pdata->disable_fiq();
+	return 0;
+}
+
+static int hdq_resume(struct platform_device *pdev)
+{
+	hdq_priv.pdata->gpio_set(1);
+	hdq_priv.pdata->gpio_dir_out();
+	hdq_priv.pdata->enable_fiq();
+	return 0;
+}
+#endif
+
+static int __init hdq_probe(struct platform_device *pdev)
+{
+	struct resource *r = platform_get_resource(pdev, 0, 0);
+	int ret;
+	struct hdq_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!r || !pdata)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, NULL);
+
+	mutex_init(&hdq_priv.hdq_lock);
+
+	/* set our HDQ comms pin from the platform data */
+	hdq_priv.hdq_gpio_pin = r->start;
+	hdq_priv.pdata = pdata;
+
+	hdq_priv.pdata->gpio_set(1);
+	hdq_priv.pdata->gpio_dir_out();
+
+	/* Initialize FIQ */
+	if (hdq_priv.pdata->enable_fiq() < 0) {
+		dev_err(&pdev->dev, "Could not enable FIQ source\n");
+		return -EINVAL;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group);
+	if (ret)
+		return ret;
+
+	hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
+
+	/*
+	 * if wanted, users can defer registration of devices
+	 * that depend on HDQ until after we register, and can use our
+	 * device as parent so suspend-resume ordering is correct
+	 */
+	if (pdata->attach_child_devices)
+		(pdata->attach_child_devices)(&pdev->dev);
+
+	hdq_priv.pdata = pdata;
+
+	return 0;
+}
+
+static int hdq_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group);
+	return 0;
+}
+
+static struct platform_driver hdq_driver = {
+	.probe		= hdq_probe,
+	.remove		= hdq_remove,
+#ifdef CONFIG_PM
+	.suspend	= hdq_suspend,
+	.resume		= hdq_resume,
+#endif
+	.driver		= {
+		.name		= "hdq",
+	},
+};
+
+static int __init hdq_init(void)
+{
+	return platform_driver_register(&hdq_driver);
+}
+
+static void __exit hdq_exit(void)
+{
+ 	platform_driver_unregister(&hdq_driver);
+}
+
+module_init(hdq_init);
+module_exit(hdq_exit);
+
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("HDQ driver");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/video/display/jbt6k74.c b/target/linux/s3c24xx/files-2.6.30/drivers/video/display/jbt6k74.c
new file mode 100644
index 0000000..eb4e46d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/video/display/jbt6k74.c
@@ -0,0 +1,772 @@
+/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>,
+ * 	   Stefan Schmidt <stefan@openmoko.org>
+ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jbt6k74.h>
+#include <linux/fb.h>
+#include <linux/time.h>
+
+enum jbt_register {
+	JBT_REG_SLEEP_IN		= 0x10,
+	JBT_REG_SLEEP_OUT		= 0x11,
+
+	JBT_REG_DISPLAY_OFF		= 0x28,
+	JBT_REG_DISPLAY_ON		= 0x29,
+
+	JBT_REG_RGB_FORMAT		= 0x3a,
+	JBT_REG_QUAD_RATE		= 0x3b,
+
+	JBT_REG_POWER_ON_OFF		= 0xb0,
+	JBT_REG_BOOSTER_OP		= 0xb1,
+	JBT_REG_BOOSTER_MODE		= 0xb2,
+	JBT_REG_BOOSTER_FREQ		= 0xb3,
+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
+	JBT_REG_VSC_VOLTAGE		= 0xb5,
+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
+	JBT_REG_EXT_DISPL		= 0xb7,
+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
+	JBT_REG_DCCLK_DCEV		= 0xb9,
+	JBT_REG_DISPLAY_MODE1		= 0xba,
+	JBT_REG_DISPLAY_MODE2		= 0xbb,
+	JBT_REG_DISPLAY_MODE		= 0xbc,
+	JBT_REG_ASW_SLEW		= 0xbd,
+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
+
+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
+
+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
+
+	/* VGA */
+	JBT_REG_BLANK_CONTROL		= 0xcf,
+	JBT_REG_BLANK_TH_TV		= 0xd0,
+	JBT_REG_CKV_ON_OFF		= 0xd1,
+	JBT_REG_CKV_1_2			= 0xd2,
+	JBT_REG_OEV_TIMING		= 0xd3,
+	JBT_REG_ASW_TIMING_1		= 0xd4,
+	JBT_REG_ASW_TIMING_2		= 0xd5,
+
+	/* QVGA */
+	JBT_REG_BLANK_CONTROL_QVGA	= 0xd6,
+	JBT_REG_BLANK_TH_TV_QVGA	= 0xd7,
+	JBT_REG_CKV_ON_OFF_QVGA		= 0xd8,
+	JBT_REG_CKV_1_2_QVGA		= 0xd9,
+	JBT_REG_OEV_TIMING_QVGA		= 0xde,
+	JBT_REG_ASW_TIMING_1_QVGA	= 0xdf,
+	JBT_REG_ASW_TIMING_2_QVGA	= 0xe0,
+
+
+	JBT_REG_HCLOCK_VGA		= 0xec,
+	JBT_REG_HCLOCK_QVGA		= 0xed,
+
+};
+
+enum jbt_state {
+	JBT_STATE_DEEP_STANDBY,
+	JBT_STATE_SLEEP,
+	JBT_STATE_NORMAL,
+	JBT_STATE_QVGA_NORMAL,
+};
+
+static const char *jbt_state_names[] = {
+	[JBT_STATE_DEEP_STANDBY]	= "deep-standby",
+	[JBT_STATE_SLEEP]		= "sleep",
+	[JBT_STATE_NORMAL]		= "normal",
+	[JBT_STATE_QVGA_NORMAL]		= "qvga-normal",
+};
+
+struct jbt_info {
+	enum jbt_state state, normal_state;
+	struct spi_device *spi_dev;
+	struct mutex lock;		/* protects tx_buf and reg_cache */
+	struct notifier_block fb_notif;
+	u16 tx_buf[8];
+	u16 reg_cache[0xEE];
+	struct timespec last_sleep;
+};
+
+#define JBT_COMMAND	0x000
+#define JBT_DATA	0x100
+
+static inline unsigned int timespec_sub_ms(struct timespec lhs,
+					struct timespec rhs)
+{
+	struct timespec ts = timespec_sub(lhs, rhs);
+	return (ts.tv_sec * MSEC_PER_SEC) + (ts.tv_nsec / NSEC_PER_MSEC);
+}
+
+static int jbt_reg_write_nodata(struct jbt_info *jbt, u8 reg)
+{
+	int rc;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       1*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = 0;
+	else
+		printk(KERN_ERR"jbt_reg_write_nodata spi_write ret %d\n",
+		       rc);
+
+	return rc;
+}
+
+
+static int jbt_reg_write(struct jbt_info *jbt, u8 reg, u8 data)
+{
+	int rc;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | data;
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       2*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = data;
+	else
+		printk(KERN_ERR"jbt_reg_write spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_reg_write16(struct jbt_info *jbt, u8 reg, u16 data)
+{
+	int rc;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | (data >> 8);
+	jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
+
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       3*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = data;
+	else
+		printk(KERN_ERR"jbt_reg_write16 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_init_regs(struct jbt_info *jbt)
+{
+	int rc;
+
+	dev_dbg(&jbt->spi_dev->dev, "entering %cVGA mode\n",
+			jbt->normal_state == JBT_STATE_QVGA_NORMAL ? 'Q' : ' ');
+
+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
+	rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
+	rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
+	rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
+	rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
+	rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
+	rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
+	/*
+	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+	 * to avoid red / blue flicker
+	 */
+	rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x04);
+	rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+	rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+	if (jbt->normal_state != JBT_STATE_QVGA_NORMAL) {
+		rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
+		rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
+		rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
+
+		rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
+		rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
+
+		rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
+		rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
+		rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
+	} else {
+		rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
+		rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
+		rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
+
+		rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
+		rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
+
+		rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
+		rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
+		rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
+	}
+
+	return rc ? -EIO : 0;
+}
+
+static int standby_to_sleep(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* three times command zero */
+	rc = jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	rc |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	rc |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+
+	/* deep standby out */
+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
+	mdelay(1);
+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
+
+	/* (re)initialize register set */
+	rc |= jbt_init_regs(jbt);
+
+	return rc ? -EIO : 0;
+}
+
+static int sleep_to_normal(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* Make sure we are 120 ms after SLEEP_OUT */
+	unsigned int sleep_time = timespec_sub_ms(current_kernel_time(),
+							jbt->last_sleep);
+	if (sleep_time < 120)
+		mdelay(120 - sleep_time);
+
+	if (jbt->normal_state == JBT_STATE_NORMAL) {
+		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+		rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
+
+		/* Quad mode off */
+		rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
+	} else {
+		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+		rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
+
+		/* Quad mode on */
+		rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
+	}
+
+	/* AVDD on, XVDD on */
+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+	/* Turn on display */
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
+
+	/* Sleep mode off */
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+	jbt->last_sleep = current_kernel_time();
+
+	/* Allow the booster and display controller to restart stably */
+	mdelay(5);
+
+	return rc ? -EIO : 0;
+}
+
+static int normal_to_sleep(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* Make sure we are 120 ms after SLEEP_OUT */
+	unsigned int sleep_time = timespec_sub_ms(current_kernel_time(),
+							jbt->last_sleep);
+	if (sleep_time < 120)
+		mdelay(120 - sleep_time);
+
+	rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
+	jbt->last_sleep = current_kernel_time();
+
+	/* Allow the internal circuits to stop automatically */
+	mdelay(5);
+
+	return rc ? -EIO : 0;
+}
+
+static int sleep_to_standby(struct jbt_info *jbt)
+{
+	return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
+}
+
+/* frontend function */
+int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state)
+{
+	int rc = -EINVAL;
+
+/*	dev_dbg(&jbt->spi_dev->dev, "entering (old_state=%s, new_state=%s)\n",
+			jbt_state_names[jbt->state],
+			jbt_state_names[new_state]);*/
+
+/*    printk("entering (old_state=%s, new_state=%s)\n",
+			jbt_state_names[jbt->state],
+			jbt_state_names[new_state]);*/
+
+	mutex_lock(&jbt->lock);
+
+	if (new_state == JBT_STATE_NORMAL ||
+			new_state == JBT_STATE_QVGA_NORMAL)
+		jbt->normal_state = new_state;
+
+	switch (jbt->state) {
+	case JBT_STATE_DEEP_STANDBY:
+		switch (new_state) {
+		case JBT_STATE_DEEP_STANDBY:
+			rc = 0;
+			break;
+		case JBT_STATE_SLEEP:
+			rc = standby_to_sleep(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+			/* first transition into sleep */
+			rc = standby_to_sleep(jbt);
+			/* then transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		case JBT_STATE_QVGA_NORMAL:
+			/* first transition into sleep */
+			rc = standby_to_sleep(jbt);
+			/* then transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_SLEEP:
+		switch (new_state) {
+		case JBT_STATE_SLEEP:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			rc = sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+		case JBT_STATE_QVGA_NORMAL:
+			rc = sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_NORMAL:
+		switch (new_state) {
+		case JBT_STATE_NORMAL:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* then transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_SLEEP:
+			rc = normal_to_sleep(jbt);
+			break;
+		case JBT_STATE_QVGA_NORMAL:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* second transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			/* third transition into sleep */
+			rc |= standby_to_sleep(jbt);
+			/* fourth transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_QVGA_NORMAL:
+		switch (new_state) {
+		case JBT_STATE_QVGA_NORMAL:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* then transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_SLEEP:
+			rc = normal_to_sleep(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* second transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			/* third transition into sleep */
+			rc |= standby_to_sleep(jbt);
+			/* fourth transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	}
+
+	if (rc == 0)
+		jbt->state = new_state;
+	else
+		dev_err(&jbt->spi_dev->dev, "Failed enter state '%s')\n",
+				jbt_state_names[new_state]);
+
+	mutex_unlock(&jbt->lock);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_enter_state);
+
+static ssize_t state_read(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+
+	if (jbt->state >= ARRAY_SIZE(jbt_state_names))
+		return -EIO;
+
+	return sprintf(buf, "%s\n", jbt_state_names[jbt->state]);
+}
+
+static ssize_t state_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int i, rc;
+
+	for (i = 0; i < ARRAY_SIZE(jbt_state_names); i++) {
+		if (!strncmp(buf, jbt_state_names[i],
+			     strlen(jbt_state_names[i]))) {
+			rc = jbt6k74_enter_state(jbt, i);
+			if (rc)
+				return rc;
+			return count;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(state, 0644, state_read, state_write);
+
+static int reg_by_string(const char *name)
+{
+	if (!strcmp(name, "gamma_fine1"))
+		return JBT_REG_GAMMA1_FINE_1;
+	else if (!strcmp(name, "gamma_fine2"))
+		return JBT_REG_GAMMA1_FINE_2;
+	else if (!strcmp(name, "gamma_inclination"))
+		return JBT_REG_GAMMA1_INCLINATION;
+	else
+		return JBT_REG_GAMMA1_BLUE_OFFSET;
+}
+
+static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	u16 val;
+
+	mutex_lock(&jbt->lock);
+	val = jbt->reg_cache[reg];
+	mutex_unlock(&jbt->lock);
+
+	return sprintf(buf, "0x%04x\n", val);
+}
+
+static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	dev_info(dev, "writing gama %lu\n", val & 0xff);
+
+	mutex_lock(&jbt->lock);
+	jbt_reg_write(jbt, reg, val & 0xff);
+	mutex_unlock(&jbt->lock);
+
+	return count;
+}
+
+static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int rc;
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	struct jbt6k74_platform_data *pdata = jbt->spi_dev->dev.platform_data;
+
+	dev_info(dev, "reset\n");
+
+	mutex_lock(&jbt->lock);
+
+	jbt->state = JBT_STATE_DEEP_STANDBY;
+
+	/* hard reset the jbt6k74 */
+	(pdata->reset)(0, 0);
+	mdelay(1);
+	(pdata->reset)(0, 1);
+	mdelay(120);
+
+	rc = jbt_reg_write_nodata(jbt, 0x01);
+	if (rc < 0)
+		dev_err(&jbt->spi_dev->dev, "cannot soft reset\n");
+	mdelay(120);
+
+	mutex_unlock(&jbt->lock);
+
+	jbt6k74_enter_state(jbt, jbt->normal_state);
+
+	return count;
+}
+
+static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(reset, 0600, NULL, reset_write);
+
+static struct attribute *jbt_sysfs_entries[] = {
+	&dev_attr_state.attr,
+	&dev_attr_gamma_fine1.attr,
+	&dev_attr_gamma_fine2.attr,
+	&dev_attr_gamma_inclination.attr,
+	&dev_attr_gamma_blue_offset.attr,
+	&dev_attr_reset.attr,
+	NULL,
+};
+
+static struct attribute_group jbt_attr_group = {
+	.name	= NULL,
+	.attrs	= jbt_sysfs_entries,
+};
+
+static int fb_notifier_callback(struct notifier_block *self,
+				unsigned long event, void *data)
+{
+	struct jbt_info *jbt;
+	struct fb_event *evdata = data;
+	int fb_blank;
+
+	jbt = container_of(self, struct jbt_info, fb_notif);
+
+	dev_dbg(&jbt->spi_dev->dev, "event=%lu\n", event);
+
+	if (event != FB_EVENT_BLANK && event != FB_EVENT_CONBLANK)
+		return 0;
+
+	fb_blank = *(int *)evdata->data;
+	switch (fb_blank) {
+	case FB_BLANK_UNBLANK:
+		dev_dbg(&jbt->spi_dev->dev, "unblank\n");
+		jbt6k74_enter_state(jbt, jbt->normal_state);
+		break;
+	case FB_BLANK_NORMAL:
+		dev_dbg(&jbt->spi_dev->dev, "blank\n");
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		dev_dbg(&jbt->spi_dev->dev, "vsync suspend\n");
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		dev_dbg(&jbt->spi_dev->dev, "hsync suspend\n");
+		break;
+	case FB_BLANK_POWERDOWN:
+		dev_dbg(&jbt->spi_dev->dev, "powerdown\n");
+		jbt6k74_enter_state(jbt, JBT_STATE_SLEEP);
+		break;
+	}
+
+	return 0;
+}
+
+/* linux device model infrastructure */
+
+static int __devinit jbt_probe(struct spi_device *spi)
+{
+	int rc;
+	struct jbt_info *jbt;
+	struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
+
+	/* the controller doesn't have a MISO pin; we can't do detection */
+
+	spi->mode = SPI_CPOL | SPI_CPHA;
+	spi->bits_per_word = 9;
+
+	rc = spi_setup(spi);
+	if (rc < 0) {
+		dev_err(&spi->dev,
+			"error during spi_setup of jbt6k74 driver\n");
+		return rc;
+	}
+
+	jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
+	if (!jbt)
+		return -ENOMEM;
+
+	jbt->spi_dev = spi;
+	jbt->normal_state = JBT_STATE_NORMAL;
+	jbt->state = JBT_STATE_DEEP_STANDBY;
+	jbt->last_sleep = current_kernel_time();
+	mutex_init(&jbt->lock);
+
+	dev_set_drvdata(&spi->dev, jbt);
+
+	rc = jbt6k74_enter_state(jbt, JBT_STATE_NORMAL);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot enter NORMAL state\n");
+		goto err_free_drvdata;
+	}
+
+	rc = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot create sysfs group\n");
+		goto err_standby;
+	}
+
+	jbt->fb_notif.notifier_call = fb_notifier_callback;
+	rc = fb_register_client(&jbt->fb_notif);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot register notifier\n");
+		goto err_sysfs;
+	}
+
+	if (pdata->probe_completed)
+		(pdata->probe_completed)(&spi->dev);
+
+	return 0;
+
+err_sysfs:
+	sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+err_standby:
+	jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
+err_free_drvdata:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(jbt);
+
+	return rc;
+}
+
+static int __devexit jbt_remove(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	/* We don't want to switch off the display in case the user
+	 * accidentially onloads the module (whose use count normally is 0) */
+	jbt6k74_enter_state(jbt, jbt->normal_state);
+
+	fb_unregister_client(&jbt->fb_notif);
+	sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(jbt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
+
+	dev_info(&spi->dev, "suspended\n");
+
+	return 0;
+}
+
+int jbt6k74_resume(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+	struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
+
+	jbt6k74_enter_state(jbt, jbt->normal_state);
+
+	if (pdata->resuming)
+		(pdata->resuming)(0);
+
+	dev_info(&spi->dev, "resumed\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_resume);
+
+#else
+#define jbt_suspend	NULL
+#define jbt6k74_resume	NULL
+#endif
+
+static struct spi_driver jbt6k74_driver = {
+	.driver = {
+		.name	= "jbt6k74",
+		.owner	= THIS_MODULE,
+	},
+
+	.probe	 = jbt_probe,
+	.remove	 = __devexit_p(jbt_remove),
+	.suspend = jbt_suspend,
+	.resume	 = jbt6k74_resume,
+};
+
+static int __init jbt_init(void)
+{
+	return spi_register_driver(&jbt6k74_driver);
+}
+
+static void __exit jbt_exit(void)
+{
+	spi_unregister_driver(&jbt6k74_driver);
+}
+
+MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(jbt_init);
+module_exit(jbt_exit);
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/bq27000_battery.h b/target/linux/s3c24xx/files-2.6.30/include/linux/bq27000_battery.h
new file mode 100644
index 0000000..a617466
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/bq27000_battery.h
@@ -0,0 +1,16 @@
+#ifndef __BQ27000_BATTERY_H__
+#define __BQ27000_BATTERY_H__
+
+void bq27000_charging_state_change(struct platform_device *pdev);
+
+struct bq27000_platform_data {
+	const char 	*name;
+	int		rsense_mohms;
+	int (*hdq_read)(int);
+	int (*hdq_write)(int, u8);
+	int (*hdq_initialized)(void);
+	int (*get_charger_online_status)(void);
+	int (*get_charger_active_status)(void);
+};
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h b/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h
new file mode 100644
index 0000000..d00f7e9
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h
@@ -0,0 +1,99 @@
+#ifndef __GLAMO_GPIO_H
+#define __GLAMO_GPIO_H
+
+struct glamo_core;
+
+#define GLAMO_GPIO_BANKA	0x0000
+#define GLAMO_GPIO_BANKB	0x1000
+#define GLAMO_GPIO_BANKC	0x2000
+#define GLAMO_GPIO_BANKD	0x3000
+
+#define GLAMO_GPIONO(bank, pin)	((bank & 0xf000) | ((pin & 0xf) << 8))
+
+#define GLAMO_GPIO_F_IN		0x0010
+#define GLAMO_GPIO_F_OUT	0x0020
+#define GLAMO_GPIO_F_FUNC	0x0030
+
+#define GLAMO_GPIO0		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 0)
+#define GLAMO_GPIO0_INPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO0_OUTPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO0_HA20	(GLAMO_GPIO0 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO1		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 1)
+#define GLAMO_GPIO1_INPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO1_OUTPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO1_HA21	(GLAMO_GPIO1 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO2		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 2)
+#define GLAMO_GPIO2_INPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO2_OUTPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO2_HA22	(GLAMO_GPIO2 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO3		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 3)
+#define GLAMO_GPIO3_INPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO3_OUTPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_OUT)
+#define	GLAMO_GPIO3_HA23	(GLAMO_GPIO3 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO4		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 0)
+#define GLAMO_GPIO4_INPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO4_OUTPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO4_nLCS0	(GLAMO_GPIO4 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO5		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 1)
+#define GLAMO_GPIO5_INPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO5_OUTPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO5_nLCS1	(GLAMO_GPIO5 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO6		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 2)
+#define GLAMO_GPIO6_INPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO6_OUTPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO6_LDCLK	(GLAMO_GPIO6 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO7		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 3)
+#define GLAMO_GPIO7_INPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO7_OUTPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO7_nLDE	(GLAMO_GPIO7 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO8		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 0)
+#define GLAMO_GPIO8_INPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO8_OUTPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO8_LD16	(GLAMO_GPIO8 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO9		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 1)
+#define GLAMO_GPIO9_INPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO9_OUTPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO9_LD17	(GLAMO_GPIO9 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO10		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 2)
+#define GLAMO_GPIO10_INPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO10_OUTPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO10_LSCK	(GLAMO_GPIO10 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO11		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 3)
+#define GLAMO_GPIO11_INPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO11_OUTPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO11_LSDA	(GLAMO_GPIO11 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO12		GLAMO_GPIONO(GLAMO_GPIO_BANKD, 0)
+#define GLAMO_GPIO12_INPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO12_OUTPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO12_LSA0	(GLAMO_GPIO12 | GLAMO_GPIO_F_FUNC)
+
+
+#define REG_OF_GPIO(gpio)	(((gpio & 0xf000) >> 12)*2 \
+						+ GLAMO_REG_GPIO_GEN1)
+#define NUM_OF_GPIO(gpio)	((gpio & 0x0f00) >> 8)
+#define GPIO_OUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 0))
+#define OUTPUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 8))
+#define FUNC_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 12))
+
+void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
+		       unsigned int value);
+
+int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin);
+
+void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc);
+
+
+#endif /* _GLAMO_GPIO */
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/glamofb.h b/target/linux/s3c24xx/files-2.6.30/include/linux/glamofb.h
new file mode 100644
index 0000000..47d41e6
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/glamofb.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/spi/glamo.h>
+
+struct glamofb_val {
+	unsigned int defval;
+	unsigned int min;
+	unsigned int max;
+};
+
+struct glamo_core;
+
+struct glamofb_platform_data {
+	int width, height;
+	int pixclock;
+	int left_margin, right_margin;
+	int upper_margin, lower_margin;
+	int hsync_len, vsync_len;
+	int fb_mem_size;
+
+	struct glamofb_val xres;
+	struct glamofb_val yres;
+	struct glamofb_val bpp;
+
+	struct glamo_spi_info *spi_info;
+	struct glamo_spigpio_info *spigpio_info;
+	struct glamo_core *glamo;
+
+	struct platform_device *mmc_dev;
+
+	/* glamo mmc platform specific info */
+	int		(*glamo_can_set_mci_power)(void);
+
+	/* glamo-mci asking if it should use the slow clock to card */
+	int		(*glamo_mci_use_slow)(void);
+	int		(*glamo_irq_is_wired)(void);
+	void		(*glamo_external_reset)(int);
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-shadow.h b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-shadow.h
new file mode 100644
index 0000000..8d723a2
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-shadow.h
@@ -0,0 +1,33 @@
+/*
+ * include/linux/gta02-shadow.h
+ *
+ * Common utility code for GTA02
+ *
+ * Copyright (C) 2008 by Openmoko, Inc.
+ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef GTA02_SHADOW_H
+#define GTA02_SHADOW_H
+
+void gta02_gpb_add_shadow_gpio(unsigned int gpio);
+void gta02_gpb_setpin(unsigned int pin, unsigned to);
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-vibrator.h b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-vibrator.h
new file mode 100644
index 0000000..9c24aac
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02-vibrator.h
@@ -0,0 +1,5 @@
+struct gta02_vib_platform_data {
+	int (* enable_fiq)(void);
+	void (*disable_fiq)(void);
+	void (*kick_fiq)(void);
+};
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/gta02_hdq.h b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02_hdq.h
new file mode 100644
index 0000000..ae0c70e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/gta02_hdq.h
@@ -0,0 +1,18 @@
+#ifndef __GTA02HDQ_H__
+#define __GTA02HDQ_H__
+
+/* platform data */
+
+struct gta02_hdq_platform_data {
+	/*
+	 * give an opportunity to use us as parent for
+	 * devices that depend on us
+	 */
+	void (*attach_child_devices)(struct device *parent_device);
+};
+
+int gta02hdq_read(int address);
+int gta02hdq_write(int address, u8 data);
+int gta02hdq_initialized(void);
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/hdq.h b/target/linux/s3c24xx/files-2.6.30/include/linux/hdq.h
new file mode 100644
index 0000000..377ab38
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/hdq.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_HDQ_H__
+#define __LINUX_HDQ_H__
+
+#include <linux/device.h>
+
+#define HDQ_SAMPLE_PERIOD_US	10
+
+/* platform data */
+
+struct hdq_platform_data {
+	/*
+	 * give an opportunity to use us as parent for
+	 * devices that depend on us
+	 */
+	void (*attach_child_devices)(struct device *parent_device);
+	
+	void (*gpio_dir_out)(void);
+	void (*gpio_dir_in)(void);
+	void (*gpio_set)(int);
+	int (*gpio_get)(void);
+
+	int (*enable_fiq)(void);
+	void (*disable_fiq)(void);
+	void (*kick_fiq)(void);
+
+};
+
+int hdq_read(int address);
+int hdq_write(int address, u8 data);
+int hdq_initialized(void);
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/jbt6k74.h b/target/linux/s3c24xx/files-2.6.30/include/linux/jbt6k74.h
new file mode 100644
index 0000000..962b3fb
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/jbt6k74.h
@@ -0,0 +1,12 @@
+#ifndef __JBT6K74_H__
+#define __JBT6K74_H__
+
+#include <linux/spi/spi.h>
+
+struct jbt6k74_platform_data {
+	void (*reset)(int devindex, int level);
+	void (*resuming)(int devindex); /* called when LCM is resumed */
+	void (*probe_completed)(struct device *dev);
+};
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/lis302dl.h b/target/linux/s3c24xx/files-2.6.30/include/linux/lis302dl.h
new file mode 100644
index 0000000..0c1fc30
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/lis302dl.h
@@ -0,0 +1,152 @@
+#ifndef _LINUX_LIS302DL_H
+#define _LINUX_LIS302DL_H
+
+#include <linux/types.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+struct lis302dl_info;
+
+struct lis302dl_platform_data {
+	char *name;
+	unsigned long pin_chip_select;
+	unsigned long pin_clk;
+	unsigned long pin_mosi;
+	unsigned long pin_miso;
+	int open_drain;
+	int interrupt;
+	void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
+};
+
+struct lis302dl_info {
+	struct lis302dl_platform_data *pdata;
+	struct device *dev;
+	struct input_dev *input_dev;
+	unsigned int flags;
+	unsigned int threshold;
+	unsigned int duration;
+	u32 overruns;
+	struct {
+		unsigned int threshold; /* mg */
+		unsigned int duration;  /* ms */
+	} wakeup;
+
+	struct spi_device *spi;
+	u_int8_t regs[0x40];
+};
+
+enum lis302dl_reg {
+	LIS302DL_REG_WHO_AM_I		= 0x0f,
+	LIS302DL_REG_CTRL1		= 0x20,
+	LIS302DL_REG_CTRL2		= 0x21,
+	LIS302DL_REG_CTRL3		= 0x22,
+	LIS302DL_REG_HP_FILTER_RESET	= 0x23,
+	LIS302DL_REG_STATUS		= 0x27,
+	LIS302DL_REG_OUT_X		= 0x29,
+	LIS302DL_REG_OUT_Y		= 0x2b,
+	LIS302DL_REG_OUT_Z		= 0x2d,
+	LIS302DL_REG_FF_WU_CFG_1	= 0x30,
+	LIS302DL_REG_FF_WU_SRC_1	= 0x31,
+	LIS302DL_REG_FF_WU_THS_1	= 0x32,
+	LIS302DL_REG_FF_WU_DURATION_1	= 0x33,
+	LIS302DL_REG_FF_WU_CFG_2	= 0x34,
+	LIS302DL_REG_FF_WU_SRC_2	= 0x35,
+	LIS302DL_REG_FF_WU_THS_2	= 0x36,
+	LIS302DL_REG_FF_WU_DURATION_2	= 0x37,
+	LIS302DL_REG_CLICK_CFG		= 0x38,
+	LIS302DL_REG_CLICK_SRC		= 0x39,
+	LIS302DL_REG_CLICK_THSY_X	= 0x3b,
+	LIS302DL_REG_CLICK_THSZ		= 0x3c,
+	LIS302DL_REG_CLICK_TIME_LIMIT	= 0x3d,
+	LIS302DL_REG_CLICK_LATENCY	= 0x3e,
+	LIS302DL_REG_CLICK_WINDOW	= 0x3f,
+};
+
+enum lis302dl_reg_ctrl1 {
+	LIS302DL_CTRL1_Xen		= 0x01,
+	LIS302DL_CTRL1_Yen		= 0x02,
+	LIS302DL_CTRL1_Zen		= 0x04,
+	LIS302DL_CTRL1_STM		= 0x08,
+	LIS302DL_CTRL1_STP		= 0x10,
+	LIS302DL_CTRL1_FS		= 0x20,
+	LIS302DL_CTRL1_PD		= 0x40,
+	LIS302DL_CTRL1_DR		= 0x80,
+};
+
+enum lis302dl_reg_ctrl2 {
+	LIS302DL_CTRL2_HPC1		= 0x01,
+	LIS302DL_CTRL2_HPC2		= 0x02,
+	LIS302DL_CTRL2_HPFF1		= 0x04,
+	LIS302DL_CTRL2_HPFF2		= 0x08,
+	LIS302DL_CTRL2_FDS		= 0x10,
+	LIS302DL_CTRL2_BOOT		= 0x40,
+	LIS302DL_CTRL2_SIM		= 0x80,
+};
+enum lis302dl_reg_ctrl3 {
+	LIS302DL_CTRL3_PP_OD		= 0x40,
+	LIS302DL_CTRL3_IHL		= 0x80,
+};
+
+enum lis302dl_reg_status {
+	LIS302DL_STATUS_XDA		= 0x01,
+	LIS302DL_STATUS_YDA		= 0x02,
+	LIS302DL_STATUS_ZDA		= 0x04,
+	LIS302DL_STATUS_XYZDA		= 0x08,
+	LIS302DL_STATUS_XOR		= 0x10,
+	LIS302DL_STATUS_YOR		= 0x20,
+	LIS302DL_STATUS_ZOR		= 0x40,
+	LIS302DL_STATUS_XYZOR		= 0x80,
+};
+
+/* Wakeup/freefall interrupt defs */
+enum lis302dl_reg_ffwucfg {
+	LIS302DL_FFWUCFG_XLIE		= 0x01,
+	LIS302DL_FFWUCFG_XHIE		= 0x02,
+	LIS302DL_FFWUCFG_YLIE		= 0x04,
+	LIS302DL_FFWUCFG_YHIE		= 0x08,
+	LIS302DL_FFWUCFG_ZLIE		= 0x10,
+	LIS302DL_FFWUCFG_ZHIE		= 0x20,
+	LIS302DL_FFWUCFG_LIR		= 0x40,
+	LIS302DL_FFWUCFG_AOI		= 0x80,
+};
+
+enum lis302dl_reg_ffwuths {
+	LIS302DL_FFWUTHS_DCRM		= 0x80,
+};
+
+enum lis302dl_reg_ffwusrc {
+	LIS302DL_FFWUSRC_XL		= 0x01,
+	LIS302DL_FFWUSRC_XH		= 0x02,
+	LIS302DL_FFWUSRC_YL		= 0x04,
+	LIS302DL_FFWUSRC_YH		= 0x08,
+	LIS302DL_FFWUSRC_ZL		= 0x10,
+	LIS302DL_FFWUSRC_ZH		= 0x20,
+	LIS302DL_FFWUSRC_IA		= 0x40,
+};
+
+enum lis302dl_reg_cloik_src {
+	LIS302DL_CLICKSRC_SINGLE_X	= 0x01,
+	LIS302DL_CLICKSRC_DOUBLE_X	= 0x02,
+	LIS302DL_CLICKSRC_SINGLE_Y	= 0x04,
+	LIS302DL_CLICKSRC_DOUBLE_Y	= 0x08,
+	LIS302DL_CLICKSRC_SINGLE_Z	= 0x10,
+	LIS302DL_CLICKSRC_DOUBLE_Z	= 0x20,
+	LIS302DL_CLICKSRC_IA		= 0x40,
+};
+
+#define LIS302DL_WHO_AM_I_MAGIC		0x3b
+
+#define LIS302DL_F_WUP_FF_1		0x0001	/* wake up from free fall */
+#define LIS302DL_F_WUP_FF_2		0x0002
+#define LIS302DL_F_WUP_FF		0x0003
+#define LIS302DL_F_WUP_CLICK	0x0004
+#define LIS302DL_F_POWER		0x0010
+#define LIS302DL_F_FS			0x0020 	/* ADC full scale */
+#define LIS302DL_F_INPUT_OPEN 	0x0040  /* Set if input device is opened */
+#define LIS302DL_F_IRQ_WAKE 	0x0080  /* IRQ is setup in wake mode */
+#define LIS302DL_F_DR			0x0100 	/* Data rate, 400Hz/100Hz */
+
+
+#endif /* _LINUX_LIS302DL_H */
+
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h b/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h
new file mode 100644
index 0000000..05b8cd7
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h
@@ -0,0 +1,27 @@
+#ifndef __GLAMO_SPI_H
+#define __GLAMO_SPI_H
+
+#include <linux/glamo-gpio.h>
+
+struct spi_board_info;
+struct glamofb_handle;
+struct glamo_core;
+
+struct glamo_spi_info {
+	unsigned long 		board_size;
+	struct spi_board_info	*board_info;
+	struct glamofb_handle	*glamofb_handle;
+};
+
+struct glamo_spigpio_info {
+	unsigned int		pin_clk;
+	unsigned int		pin_mosi;
+	unsigned int		pin_miso;
+	unsigned int 		pin_cs;
+	int 			bus_num;
+
+	struct glamo_core	*glamo;
+};
+
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter.h
new file mode 100644
index 0000000..aac1e02
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter.h
@@ -0,0 +1,74 @@
+#ifndef __TS_FILTER_H__
+#define __TS_FILTER_H__
+
+/*
+ * Touchscreen filter.
+ *
+ * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include <linux/platform_device.h>
+
+#define MAX_TS_FILTER_COORDS		3  /* X, Y and Z (pressure). */
+
+struct ts_filter;
+struct ts_filter_configuration;
+
+/* Operations that a filter can perform. */
+
+struct ts_filter_api {
+	/* Create the filter - mandatory. */
+	struct ts_filter * (*create)(
+		struct platform_device *pdev,
+		const struct ts_filter_configuration *config,
+		int count_coords);
+	/* Destroy the filter - mandatory. */
+	void (*destroy)(struct ts_filter *filter);
+	/* Clear the filter - optional. */
+	void (*clear)(struct ts_filter *filter);
+
+
+	/*
+	 * The next three API functions only make sense if all of them are
+	 * set for a filter. If a filter has the next three methods then
+	 * it can propagate coordinates in the chain.
+	 */
+
+	/*
+	 * Process the filter.
+	 * It returns non-zero if the filter reaches an error.
+	 */
+	int (*process)(struct ts_filter *filter, int *coords);
+	/*
+	 * Is the filter ready to return a point?
+	 * Please do not code side effects in this function.
+	 */
+	int (*haspoint)(struct ts_filter *filter);
+	/*
+	 * Get a point.
+	 * Do not call unless the filter actually has a point to deliver.
+	 */
+	void (*getpoint)(struct ts_filter *filter, int *coords);
+
+	/*
+	 * Scale the points - optional.
+	 * A filter could only scale coordinates.
+	 */
+	void (*scale)(struct ts_filter *filter, int *coords);
+};
+
+/*
+ * Generic filter configuration. Actual configurations have this structure
+ * as a member.
+ */
+struct ts_filter_configuration {
+};
+
+struct ts_filter {
+	/* Operations for this filter. */
+	const struct ts_filter_api *api;
+	/* Number of coordinates to process. */
+	int count_coords;
+};
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_chain.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_chain.h
new file mode 100644
index 0000000..806bffe
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_chain.h
@@ -0,0 +1,58 @@
+#ifndef __TS_FILTER_CHAIN_H__
+#define __TS_FILTER_CHAIN_H__
+
+/*
+ * Touchscreen filter chains.
+ *
+ * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include "ts_filter.h"
+
+#include <linux/err.h>
+
+struct ts_filter_chain_configuration {
+	/* API to use. */
+	const struct ts_filter_api *api;
+	/* Generic filter configuration. Different for each filter. */
+	const struct ts_filter_configuration *config;
+};
+
+struct ts_filter_chain;
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+
+/*
+ * Create a filter chain. It will allocate an array of
+ * null-terminated pointers to filters. On error it will return
+ * an error you can check with IS_ERR.
+ */
+extern struct ts_filter_chain *ts_filter_chain_create(
+	struct platform_device *pdev,
+	const struct ts_filter_chain_configuration conf[],
+	int count_coords);
+
+/* Destroy the chain. */
+extern void ts_filter_chain_destroy(struct ts_filter_chain *c);
+
+/* Clear the filter chain. */
+extern void ts_filter_chain_clear(struct ts_filter_chain *c);
+
+/*
+ * Try to get one point. Returns 0 if no points are available.
+ * coords will be used as temporal space, thus you supply a point
+ * using coords but you shouldn't rely on its value on return unless
+ * it returns a nonzero value that is not -1.
+ * If one of the filters find an error then this function will
+ * return -1.
+ */
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords);
+
+#else /* !CONFIG_TOUCHSCREEN_FILTER */
+#define ts_filter_chain_create(pdev, config, count_coords) (NULL)
+#define ts_filter_chain_destroy(c) do { } while (0)
+#define ts_filter_chain_clear(c) do { } while (0)
+#define ts_filter_chain_feed(c, coords) (1)
+#endif
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_group.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_group.h
new file mode 100644
index 0000000..d1e3590
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_group.h
@@ -0,0 +1,36 @@
+#ifndef __TS_FILTER_GROUP_H__
+#define __TS_FILTER_GROUP_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen group filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+struct ts_filter_group_configuration {
+	/* Size of the filter. */
+	int length;
+	/*
+	 * If two points are separated by this distance or less they
+	 * are considered to be members of the same group.
+	 */
+	int close_enough;
+	/* Minimum allowed size for the biggest group in the sample set. */
+	int threshold;
+	/*
+	 * Number of times we try to get a group of points with at least
+	 * threshold points.
+	 */
+	int attempts;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_group_api;
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_linear.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_linear.h
new file mode 100644
index 0000000..82df3d2
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_linear.h
@@ -0,0 +1,31 @@
+#ifndef __TS_FILTER_LINEAR_H__
+#define __TS_FILTER_LINEAR_H__
+
+#include "ts_filter.h"
+#include <linux/kobject.h>
+
+/*
+ * Touchscreen linear filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+#define TS_FILTER_LINEAR_NCONSTANTS 7
+
+struct ts_filter_linear_configuration {
+	/* Calibration constants. */
+	int constants[TS_FILTER_LINEAR_NCONSTANTS];
+	/* First coordinate. */
+	int coord0;
+	/* Second coordinate. */
+	int coord1;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_linear_api;
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_mean.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_mean.h
new file mode 100644
index 0000000..f5b5e4b
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_mean.h
@@ -0,0 +1,28 @@
+#ifndef __TS_FILTER_MEAN_H__
+#define __TS_FILTER_MEAN_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen filter.
+ *
+ * mean
+ *
+ * (c) 2008,2009
+ *     Andy Green <andy@openmoko.com>
+ *     Nelson Castillo <arhuaco@freaks-unidos.net>
+ */
+
+/* Configuration for this filter. */
+struct ts_filter_mean_configuration {
+	/* Number of points for the mean. */
+	int length;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+/* API functions for the mean filter */
+extern const struct ts_filter_api ts_filter_mean_api;
+
+#endif /* __TS_FILTER_MEAN_H__ */
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_median.h b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_median.h
new file mode 100644
index 0000000..1c19472
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/touchscreen/ts_filter_median.h
@@ -0,0 +1,32 @@
+#ifndef __TS_FILTER_MEDIAN_H__
+#define __TS_FILTER_MEDIAN_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen filter.
+ *
+ * median
+ *
+ * (c) 2008 Andy Green <andy@openmoko.com>
+ */
+
+struct ts_filter_median_configuration {
+	/* Size of the filter. */
+	int extent;
+	/* Precomputed midpoint. */
+	int midpoint;
+	/* A reference value for us to check if we are going fast or slow. */
+	int decimation_threshold;
+	/* How many points to replace if we're going fast. */
+	int decimation_above;
+	/* How many points to replace if we're going slow. */
+	int decimation_below;
+
+	/* Generic configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_median_api;
+
+#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c b/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c
new file mode 100644
index 0000000..4abb18a
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c
@@ -0,0 +1,481 @@
+/*
+ * neo1973_gta02_wm8753.c  --  SoC audio for Openmoko freerunner
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gta02.h>
+#include "../codecs/wm8753.h"
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+
+static struct snd_soc_card neo1973_gta02;
+
+static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int pll_out = 0, bclk = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+		pll_out = 12288000;
+		break;
+	case 48000:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 12288000;
+		break;
+	case 96000:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 12288000;
+		break;
+	case 11025:
+		bclk = WM8753_BCLK_DIV_16;
+		pll_out = 11289600;
+		break;
+	case 22050:
+		bclk = WM8753_BCLK_DIV_8;
+		pll_out = 11289600;
+		break;
+	case 44100:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 11289600;
+		break;
+	case 88200:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set codec BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai,
+					WM8753_BCLKDIV, bclk);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(4, 4));
+	if (ret < 0)
+		return ret;
+
+	/* codec PLL input is PCLK/4 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+		iis_clkrate / 4, pll_out);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_gta02_hifi_ops = {
+	.hw_params = neo1973_gta02_hifi_hw_params,
+	.hw_free = neo1973_gta02_hifi_hw_free,
+};
+
+static int neo1973_gta02_voice_hw_params(
+	struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	unsigned int pcmdiv = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+	if (params_channels(params) != 1)
+		return -EINVAL;
+
+	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+	/* todo: gg check mode (DSP_B) against CSR datasheet */
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+		12288000, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set codec PCM division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+					pcmdiv);
+	if (ret < 0)
+		return ret;
+
+	/* configue and enable PLL for 12.288MHz output */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+		iis_clkrate / 4, 12288000);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_gta02_voice_ops = {
+	.hw_params = neo1973_gta02_voice_hw_params,
+	.hw_free = neo1973_gta02_voice_hw_free,
+};
+
+#define LM4853_AMP 1
+#define LM4853_SPK 2
+
+static u8 lm4853_state;
+
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+static int lm4853_set_state(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = ucontrol->value.integer.value[0];
+
+	if (val)
+		lm4853_state |= LM4853_AMP;
+	else
+		lm4853_state &= ~LM4853_AMP;
+
+	return 0;
+}
+
+static int lm4853_get_state(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
+
+	return 0;
+}
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = ucontrol->value.integer.value[0];
+
+	if (val) {
+		lm4853_state |= LM4853_SPK;
+		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 0);
+	} else {
+		lm4853_state &= ~LM4853_SPK;
+		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+	}
+
+	return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
+
+	return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k,
+			int event)
+{
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
+
+	if (SND_SOC_DAPM_EVENT_OFF(event))
+		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line In", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Handset Mic", NULL),
+	SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+
+/* example machine audio_mapnections */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	/* Connections to the lm4853 amp */
+	{"Stereo Out", NULL, "LOUT1"},
+	{"Stereo Out", NULL, "ROUT1"},
+
+	/* Connections to the GSM Module */
+	{"GSM Line Out", NULL, "MONO1"},
+	{"GSM Line Out", NULL, "MONO2"},
+	{"RXP", NULL, "GSM Line In"},
+	{"RXN", NULL, "GSM Line In"},
+
+	/* Connections to Headset */
+	{"MIC1", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Headset Mic"},
+
+	/* Call Mic */
+	{"MIC2", NULL, "Mic Bias"},
+	{"MIC2N", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Handset Mic"},
+
+	/* Call Speaker */
+	{"Handset Spk", NULL, "LOUT2"},
+	{"Handset Spk", NULL, "ROUT2"},
+
+	/* Connect the ALC pins */
+	{"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Stereo Out"),
+	SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+	SOC_DAPM_PIN_SWITCH("GSM Line In"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Handset Mic"),
+	SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+	/* This has no effect, it exists only to maintain compatibility with
+	 * existing ALSA state files.
+	 */
+	SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
+		lm4853_get_state,
+		lm4853_set_state),
+	SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+		lm4853_get_spk,
+		lm4853_set_spk),
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 GTA02.
+ */
+static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
+{
+	int i, err;
+
+	/* set up NC codec pins */
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "OUT4");
+	snd_soc_dapm_nc_pin(codec, "LINE1");
+	snd_soc_dapm_nc_pin(codec, "LINE2");
+
+	/* Add neo1973 gta02 specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+				  ARRAY_SIZE(wm8753_dapm_widgets));
+
+	/* add neo1973 gta02 specific controls */
+	for (i = 0; i < ARRAY_SIZE(wm8753_neo1973_gta02_controls); i++) {
+		err = snd_ctl_add(codec->card,
+			snd_soc_cnew(&wm8753_neo1973_gta02_controls[i],
+			codec, NULL));
+		if (err < 0)
+			return err;
+	}
+
+	/* set up neo1973 gta02 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_disable_pin(codec, "Stereo Out");
+	snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+	snd_soc_dapm_disable_pin(codec, "GSM Line In");
+	snd_soc_dapm_disable_pin(codec, "Headset Mic");
+	snd_soc_dapm_disable_pin(codec, "Handset Mic");
+	snd_soc_dapm_disable_pin(codec, "Handset Spk");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai bt_dai = {
+	.name = "Bluetooth",
+	.id = 0,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_gta02_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+	.name = "WM8753",
+	.stream_name = "WM8753 HiFi",
+	.cpu_dai = &s3c24xx_i2s_dai,
+	.codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
+	.init = neo1973_gta02_wm8753_init,
+	.ops = &neo1973_gta02_hifi_ops,
+},
+{ /* Voice via BT */
+	.name = "Bluetooth",
+	.stream_name = "Voice",
+	.cpu_dai = &bt_dai,
+	.codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
+	.ops = &neo1973_gta02_voice_ops,
+},
+};
+
+static struct snd_soc_card neo1973_gta02 = {
+	.name = "neo1973-gta02",
+	.platform = &s3c24xx_soc_platform,
+	.dai_link = neo1973_gta02_dai,
+	.num_links = ARRAY_SIZE(neo1973_gta02_dai),
+};
+
+static struct snd_soc_device neo1973_gta02_snd_devdata = {
+	.card = &neo1973_gta02,
+	.codec_dev = &soc_codec_dev_wm8753,
+};
+
+static struct platform_device *neo1973_gta02_snd_device;
+
+static int __init neo1973_gta02_init(void)
+{
+	int ret;
+
+	if (!machine_is_neo1973_gta02()) {
+		printk(KERN_INFO
+		       "Only GTA02 is supported by this ASoC driver\n");
+		return -ENODEV;
+	}
+
+	/* register bluetooth DAI here */
+	ret = snd_soc_register_dai(&bt_dai);
+	if (ret)
+		return ret;
+
+	neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!neo1973_gta02_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(neo1973_gta02_snd_device,
+			&neo1973_gta02_snd_devdata);
+	neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
+	ret = platform_device_add(neo1973_gta02_snd_device);
+
+	if (ret) {
+		platform_device_put(neo1973_gta02_snd_device);
+		return ret;
+	}
+
+	/* Initialise GPIOs used by amp */
+	s3c2410_gpio_cfgpin(GTA02_GPIO_HP_IN, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(GTA02_GPIO_AMP_SHUT, S3C2410_GPIO_OUTPUT);
+
+	/* Amp off by default */
+	s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+
+	/* Speaker off by default */
+	s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+
+	return ret;
+}
+module_init(neo1973_gta02_init);
+
+static void __exit neo1973_gta02_exit(void)
+{
+	snd_soc_unregister_dai(&bt_dai);
+	platform_device_unregister(neo1973_gta02_snd_device);
+}
+module_exit(neo1973_gta02_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
+MODULE_LICENSE("GPL");