bump to 2.6.30-rc6

SVN-Revision: 15918

22 files changed, 7488 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch
new file mode 100644
index 0000000..0738a38
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch
@@ -0,0 +1,2265 @@
+Merge OpenMoko kernel patches
+git://git.openmoko.org/git/kernel.git#(no
+
+lars@lars-laptop   Thu May 14 18:33:23 UTC 2009
+
+---
+
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/mci.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/mci.h	2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,13 @@
++#ifndef _ARCH_MCI_H
++#define _ARCH_MCI_H
++
++struct s3c24xx_mci_pdata {
++	unsigned int	gpio_detect;
++	unsigned int	gpio_wprotect;
++	unsigned long	ocr_avail;
++	unsigned int	do_dma;
++	void		(*set_power)(unsigned char power_mode,
++				     unsigned short vdd);
++};
++
++#endif /* _ARCH_NCI_H */
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/include/mach/regs-sdi.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/regs-sdi.h	2009-05-18 19:07:48.000000000 +0200
+@@ -30,6 +30,7 @@
+ #define S3C2410_SDIFSTA               (0x38)
+ 
+ #define S3C2410_SDIDATA               (0x3C)
++#define S3C2410_SDIDATA_BYTE          (0x3C)
+ #define S3C2410_SDIIMSK               (0x40)
+ 
+ #define S3C2440_SDIDATA               (0x40)
+@@ -37,6 +38,8 @@
+ 
+ #define S3C2440_SDICON_SDRESET        (1<<8)
+ #define S3C2440_SDICON_MMCCLOCK       (1<<5)
++#define S3C2440_SDIDATA_BYTE          (0x48)
++
+ #define S3C2410_SDICON_BYTEORDER      (1<<4)
+ #define S3C2410_SDICON_SDIOIRQ        (1<<3)
+ #define S3C2410_SDICON_RWAITEN        (1<<2)
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2440/s3c2440.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2440/s3c2440.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2440/s3c2440.c	2009-05-18 19:07:48.000000000 +0200
+@@ -46,6 +46,9 @@
+ 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ 	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
+ 
++	/* make sure SD/MMC driver can distinguish 2440 from 2410 */
++	s3c_device_sdi.name = "s3c2440-sdi";
++
+ 	/* register our system device for everything else */
+ 
+ 	return sysdev_register(&s3c2440_sysdev);
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/s3c2442.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/s3c2442.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/s3c2442.c	2009-05-18 19:07:48.000000000 +0200
+@@ -21,6 +21,7 @@
+ 
+ #include <plat/s3c2442.h>
+ #include <plat/cpu.h>
++#include <plat/devs.h>
+ 
+ static struct sys_device s3c2442_sysdev = {
+ 	.cls		= &s3c2442_sysclass,
+@@ -30,5 +31,8 @@
+ {
+ 	printk("S3C2442: Initialising architecture\n");
+ 
++	/* make sure SD/MMC driver can distinguish 2440 from 2410 */
++	s3c_device_sdi.name = "s3c2440-sdi";
++
+ 	return sysdev_register(&s3c2442_sysdev);
+ }
+Index: linux-2.6.30-rc6/arch/arm/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/Makefile	2009-05-18 19:07:48.000000000 +0200
+@@ -55,7 +55,8 @@
+ arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+ endif
+ arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+-arch-$(CONFIG_CPU_32v4T)	:=-D__LINUX_ARM_ARCH__=4 -march=armv4t
++# We can't load armv4t modules, but still need to assemble some armv4t code to be linked in.
++arch-$(CONFIG_CPU_32v4T)	:=-D__LINUX_ARM_ARCH__=4 -march=armv4 -Wa,-march=armv4t
+ arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
+ arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/mach/cpu.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/mach/cpu.h	2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,165 @@
++/*
++ * arch/arm/plat-s3c/include/mach/cpu.h
++ *
++ *  S3C cpu type detection
++ *
++ *  Copyright (C) 2008 Samsung Electronics
++ *  Kyungmin Park <kyungmin.park@samsung.com>
++ *
++ * Derived from OMAP cpu.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __ASM_ARCH_S3C_CPU_H
++#define __ASM_ARCH_S3C_CPU_H
++
++extern unsigned int system_rev;
++
++#define S3C_SYSTEM_REV_ATAG (system_rev & 0xffff)
++#define S3C_SYSTEM_REV_CPU (system_rev & 0xffff0000)
++
++/*
++ * cpu_is_s3c24xx():	True for s3c2400, s3c2410, s3c2440 and so on
++ * cpu_is_s3c241x():	True fro s3c2410, s3c2412
++ * cpu_is_s3c244x():	True fro s3c2440, s3c2442, s3c2443
++ * cpu_is_s3c64xx():	True for s3c6400, s3c6410
++ */
++#define GET_S3C_CLASS	((system_rev >> 24) & 0xff)
++
++#define IS_S3C_CLASS(class, id)						\
++static inline int is_s3c ##class (void)					\
++{									\
++	return (GET_S3C_CLASS == (id)) ? 1 : 0;				\
++}
++
++#define GET_S3C_SUBCLASS	((system_rev >> 20) & 0xfff)
++
++#define IS_S3C_SUBCLASS(subclass, id)					\
++static inline int is_s3c ##subclass (void)				\
++{									\
++	return (GET_S3C_SUBCLASS == (id)) ? 1 : 0;			\
++}
++
++IS_S3C_CLASS(24xx, 0x24)
++IS_S3C_CLASS(64xx, 0x64)
++
++IS_S3C_SUBCLASS(241x, 0x241)
++IS_S3C_SUBCLASS(244x, 0x244)
++
++#define cpu_is_s3c24xx()		0
++#define cpu_is_s3c241x()		0
++#define cpu_is_s3c244x()		0
++#define cpu_is_s3c64xx()		0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef  cpu_is_s3c24xx
++# undef  cpu_is_s3c241x
++# undef  cpu_is_s3c244x
++# define cpu_is_s3c24xx()		is_s3c24xx()
++# define cpu_is_s3c241x()		is_s3c241x()
++# define cpu_is_s3c244x()		is_s3c244x()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef  cpu_is_s3c64xx
++# define cpu_is_s3c64xx()		is_s3c64xx()
++#endif
++
++/*
++ * Macros to detect individual cpu types.
++ * cpu_is_s3c2410():	True for s3c2410
++ * cpu_is_s3c2440():	True for s3c2440
++ * cpu_is_s3c6400():	True for s3c6400
++ * cpu_is_s3c6410():	True for s3c6410
++ *
++ * Exception:
++ * Store Revision A to 1
++ * s3c2410a -> s3c2411
++ * s3c2440a -> s3c2441
++ */
++
++#define GET_S3C_TYPE	((system_rev >> 16) & 0xffff)
++
++#define IS_S3C_TYPE(type, id)						\
++static inline int is_s3c ##type (void)					\
++{									\
++	return (GET_S3C_TYPE == (id)) ? 1 : 0;				\
++}
++
++IS_S3C_TYPE(2400, 0x2400)
++IS_S3C_TYPE(2410, 0x2410)
++IS_S3C_TYPE(2410a, 0x2411)
++IS_S3C_TYPE(2412, 0x2412)
++IS_S3C_TYPE(2440, 0x2440)
++IS_S3C_TYPE(2440a, 0x2441)
++IS_S3C_TYPE(2442, 0x2442)
++IS_S3C_TYPE(2443, 0x2443)
++IS_S3C_TYPE(6400, 0x6400)
++IS_S3C_TYPE(6410, 0x6410)
++
++#define cpu_is_s3c2400()		0
++#define cpu_is_s3c2410()		0
++#define cpu_is_s3c2410a()		0
++#define cpu_is_s3c2412()		0
++#define cpu_is_s3c2440()		0
++#define cpu_is_s3c2440a()		0
++#define cpu_is_s3c2442()		0
++#define cpu_is_s3c2443()		0
++#define cpu_is_s3c6400()		0
++#define cpu_is_s3c6410()		0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef  cpu_is_s3c2400
++# define cpu_is_s3c2400()		is_s3c2400()
++#endif
++
++#if defined(CONFIG_CPU_S3C2410)
++# undef  cpu_is_s3c2410
++# undef  cpu_is_s3c2410a
++# define cpu_is_s3c2410()		is_s3c2410()
++# define cpu_is_s3c2410a()		is_s3c2410a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2412)
++# undef  cpu_is_s3c2412
++# define cpu_is_s3c2412()		is_s3c2412()
++#endif
++
++#if defined(CONFIG_CPU_S3C2440)
++# undef  cpu_is_s3c2440
++# undef  cpu_is_s3c2440a
++# define cpu_is_s3c2440()		is_s3c2440()
++# define cpu_is_s3c2440a()		is_s3c2440a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2442)
++# undef  cpu_is_s3c2442
++# define cpu_is_s3c2442()		is_s3c2442()
++#endif
++
++#if defined(CONFIG_CPU_S3C2443)
++# undef  cpu_is_s3c2443
++# define cpu_is_s3c2443()		is_s3c2443()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef  cpu_is_s3c6400
++# undef  cpu_is_s3c6410
++# define cpu_is_s3c6400()		is_s3c6400()
++# define cpu_is_s3c6410()		is_s3c6410()
++#endif
++
++#endif
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/devs.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h	2009-05-18 19:07:48.000000000 +0200
+@@ -16,6 +16,10 @@
+ 	unsigned long		 nr_resources;
+ };
+ 
++struct s3c_plat_otg_data {
++	int		phyclk;
++};
++
+ extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/gpio-core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/gpio-core.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/gpio-core.h	2009-05-18 19:07:48.000000000 +0200
+@@ -20,6 +20,19 @@
+  * specific code.
+ */
+ 
++struct s3c_gpio_chip;
++
++/**
++ * struct s3c_gpio_pm - power management (suspend/resume) information
++ * @save: Routine to save the state of the GPIO block
++ * @resume: Routine to resume the GPIO block.
++ */
++struct s3c_gpio_pm {
++	void (*save)(struct s3c_gpio_chip *chip);
++	void (*resume)(struct s3c_gpio_chip *chip);
++};
++
++
+ struct s3c_gpio_cfg;
+ 
+ /**
+@@ -27,6 +40,7 @@
+  * @chip: The chip structure to be exported via gpiolib.
+  * @base: The base pointer to the gpio configuration registers.
+  * @config: special function and pull-resistor control information.
++ * @pm_save: Save information for suspend/resume support.
+  *
+  * This wrapper provides the necessary information for the Samsung
+  * specific gpios being registered with gpiolib.
+@@ -34,7 +48,11 @@
+ struct s3c_gpio_chip {
+ 	struct gpio_chip	chip;
+ 	struct s3c_gpio_cfg	*config;
++	struct s3c_gpio_pm	*pm;
+ 	void __iomem		*base;
++#ifdef CONFIG_PM
++	u32			pm_save[4];
++#endif
+ };
+ 
+ static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+@@ -75,3 +93,16 @@
+ 
+ static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+ #endif
++
++#ifdef CONFIG_PM
++extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
++#define __gpio_pm(x) x
++#else
++#define s3c_gpio_pm_1bit NULL
++#define s3c_gpio_pm_2bit NULL
++#define s3c_gpio_pm_4bit NULL
++#define __gpio_pm(x) NULL
++
++#endif /* CONFIG_PM */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/map-base.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/map-base.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/map-base.h	2009-05-18 19:07:48.000000000 +0200
+@@ -36,5 +36,7 @@
+ #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
+ #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
+ #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
++#define S3C_VA_OTG	S3C_ADDR(0x03900000)	/* OTG */
++#define S3C_VA_OTGSFR	S3C_ADDR(0x03a00000)	/* OTGSFR */
+ 
+ #endif /* __ASM_PLAT_MAP_H */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/nand.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/nand.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/nand.h	2009-05-18 19:07:48.000000000 +0200
+@@ -21,11 +21,14 @@
+  * partitions	 = mtd partition list
+ */
+ 
++#define S3C2410_NAND_BBT	0x0001
++
+ struct s3c2410_nand_set {
+ 	unsigned int		disable_ecc : 1;
+ 
+ 	int			nr_chips;
+ 	int			nr_partitions;
++	unsigned int		flags;
+ 	char			*name;
+ 	int			*nr_map;
+ 	struct mtd_partition	*partitions;
+@@ -44,6 +47,9 @@
+ 	int			nr_sets;
+ 	struct s3c2410_nand_set *sets;
+ 
++	/* force software_ecc at runtime */
++	int	software_ecc;
++
+ 	void			(*select_chip)(struct s3c2410_nand_set *,
+ 					       int chip);
+ };
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pm.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/pm.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pm.h	2009-05-18 19:07:48.000000000 +0200
+@@ -9,6 +9,8 @@
+  * published by the Free Software Foundation.
+ */
+ 
++#include <linux/sysdev.h>
++
+ /* s3c_pm_init
+  *
+  * called from board at initialisation time to setup the power
+@@ -44,6 +46,8 @@
+ 
+ extern unsigned long s3c_pm_flags;
+ 
++extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
++
+ /* from sleep.S */
+ 
+ extern int  s3c_cpu_save(unsigned long *saveblk);
+@@ -88,6 +92,7 @@
+ 	u32	ufcon;
+ 	u32	umcon;
+ 	u32	ubrdiv;
++	u32	udivslot;
+ };
+ 
+ /* helper functions to save/restore lists of registers. */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/sdhci.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/sdhci.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/sdhci.h	2009-05-18 19:07:48.000000000 +0200
+@@ -29,6 +29,7 @@
+  *            is necessary the controllers and/or GPIO blocks require the
+  *	      changing of driver-strength and other controls dependant on
+  *	      the card and speed of operation.
++ * sdhci_host: Pointer kept during init, allows presence change notification
+  *
+  * Initialisation data specific to either the machine or the platform
+  * for the device driver to use or call-back when configuring gpio or
+@@ -45,8 +46,11 @@
+ 			    void __iomem *regbase,
+ 			    struct mmc_ios *ios,
+ 			    struct mmc_card *card);
++	struct sdhci_host * sdhci_host;
+ };
+ 
++extern void sdhci_s3c_force_presence_change(struct platform_device *pdev);
++
+ /**
+  * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+  * @pd: Platform data to register to device.
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/init.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/init.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/init.c	2009-05-18 19:07:48.000000000 +0200
+@@ -31,6 +31,34 @@
+ 
+ static struct cpu_table *cpu;
+ 
++static void __init set_system_rev(unsigned int idcode)
++{
++	/*
++	 * system_rev encoding is as follows
++	 * system_rev & 0xff000000 -> S3C Class (24xx/64xx)
++	 * system_rev & 0xfff00000 -> S3C Sub Class (241x/244x)
++	 * system_rev & 0xffff0000 -> S3C Type (2410/2440/6400/6410)
++	 *
++	 * Remaining[15:0] are preserved from the value set by ATAG
++	 *
++	 * Exception:
++	 *  Store Revision A to 1 such as
++	 *  s3c2410A to s3c2411
++	 *  s3c2440A to s3c2441
++	 */
++
++	system_rev &= 0xffff;
++	system_rev |= (idcode & 0x0ffff000) << 4;
++
++	if (idcode == 0x32410002 || idcode == 0x32440001)
++		system_rev |= (0x1 << 16);
++	if (idcode == 0x32440aaa	/* s3c2442 */
++	    || idcode == 0x32440aab)	/* s3c2442b */
++		system_rev |= (0x2 << 16);
++	if (idcode == 0x0)		/* s3c2400 */
++		system_rev |= (0x2400 << 16);
++}
++
+ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+ 						struct cpu_table *tab,
+ 						unsigned int count)
+@@ -53,6 +81,8 @@
+ 		panic("Unknown S3C24XX CPU");
+ 	}
+ 
++	set_system_rev(idcode);
++
+ 	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+ 
+ 	if (cpu->map_io == NULL || cpu->init == NULL) {
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile	2009-05-18 19:07:48.000000000 +0200
+@@ -21,6 +21,7 @@
+ # PM support
+ 
+ obj-$(CONFIG_PM)		+= pm.o
++obj-$(CONFIG_PM)		+= pm-gpio.o
+ obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
+ 
+ # devices
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/pm.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/pm.c	2009-05-18 19:07:48.000000000 +0200
+@@ -21,11 +21,10 @@
+ 
+ #include <asm/cacheflush.h>
+ #include <mach/hardware.h>
++#include <mach/map.h>
+ 
+ #include <plat/regs-serial.h>
+ #include <mach/regs-clock.h>
+-#include <mach/regs-gpio.h>
+-#include <mach/regs-mem.h>
+ #include <mach/regs-irq.h>
+ #include <asm/irq.h>
+ 
+@@ -70,6 +69,8 @@
+ 
+ /* Save the UART configurations if we are configured for debug. */
+ 
++unsigned char pm_uart_udivslot;
++
+ #ifdef CONFIG_S3C2410_PM_DEBUG
+ 
+ struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+@@ -83,6 +84,12 @@
+ 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+ 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+ 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
++
++	if (pm_uart_udivslot)
++		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
++
++	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
++		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+ }
+ 
+ static void s3c_pm_save_uarts(void)
+@@ -98,11 +105,16 @@
+ {
+ 	void __iomem *regs = S3C_VA_UARTx(uart);
+ 
++	s3c_pm_arch_update_uart(regs, save);
++
+ 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+ 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+ 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+ 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+ 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
++
++	if (pm_uart_udivslot)
++		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+ }
+ 
+ static void s3c_pm_restore_uarts(void)
+@@ -289,11 +301,14 @@
+ 
+ 	s3c_pm_arch_stop_clocks();
+ 
+-	/* s3c_cpu_save will also act as our return point from when
+-	 * we resume as it saves its own register state and restores it
+-	 * during the resume.  */
+-
+-	s3c_cpu_save(regs_save);
++	/* s3c2410_cpu_save will also act as our return point from when
++	 * we resume as it saves its own register state, so use the return
++	 * code to differentiate return from save and return from sleep */
++
++	if (s3c_cpu_save(regs_save) == 0) {
++		flush_cache_all();
++		pm_cpu_sleep();
++	}
+ 
+ 	/* restore the cpu state using the kernel's cpu init code. */
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/pm-gpio.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/pm-gpio.c	2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,378 @@
++/* linux/arch/arm/plat-s3c/pm-gpio.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *	http://armlinux.simtec.co.uk/
++ *
++ * S3C series GPIO PM code
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++
++#include <mach/gpio-core.h>
++#include <plat/pm.h>
++
++/* PM GPIO helpers */
++
++#define OFFS_CON	(0x00)
++#define OFFS_DAT	(0X04)
++#define OFFS_UP		(0X08)
++
++static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
++{
++	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++}
++
++static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
++{
++	void __iomem *base = chip->base;
++	u32 old_gpcon = __raw_readl(base + OFFS_CON);
++	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++	u32 gps_gpcon = chip->pm_save[0];
++	u32 gps_gpdat = chip->pm_save[1];
++	u32 gpcon;
++
++	/* GPACON only has one bit per control / data and no PULLUPs.
++	 * GPACON[x] = 0 => Output, 1 => SFN */
++
++	/* first set all SFN bits to SFN */
++
++	gpcon = old_gpcon | gps_gpcon;
++	__raw_writel(gpcon, base + OFFS_CON);
++
++	/* now set all the other bits */
++
++	__raw_writel(gps_gpdat, base + OFFS_DAT);
++	__raw_writel(gps_gpcon, base + OFFS_CON);
++
++	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_1bit = {
++	.save	= s3c_gpio_pm_1bit_save,
++	.resume = s3c_gpio_pm_1bit_resume,
++};
++
++static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
++{
++	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
++}
++
++/* Test whether the given masked+shifted bits of an GPIO configuration
++ * are one of the SFN (special function) modes. */
++
++static inline int is_sfn(unsigned long con)
++{
++	return con >= 2;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an input */
++
++static inline int is_in(unsigned long con)
++{
++	return con == 0;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an output */
++
++static inline int is_out(unsigned long con)
++{
++	return con == 1;
++}
++
++/**
++ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
++ * @chip: The chip information to resume.
++ *
++ * Restore one of the GPIO banks that was saved during suspend. This is
++ * not as simple as once thought, due to the possibility of glitches
++ * from the order that the CON and DAT registers are set in.
++ *
++ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
++ * combinations of changes to check. Three of these, if the pin stays
++ * in the same configuration can be discounted. This leaves us with
++ * the following:
++ *
++ * { IN => OUT }  Change DAT first
++ * { IN => SFN }  Change CON first
++ * { OUT => SFN } Change CON first, so new data will not glitch
++ * { OUT => IN }  Change CON first, so new data will not glitch
++ * { SFN => IN }  Change CON first
++ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
++ *
++ * We do not currently deal with the UP registers as these control
++ * weak resistors, so a small delay in change should not need to bring
++ * these into the calculations.
++ *
++ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
++ *     state for when it is next output.
++ */
++static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
++{
++	void __iomem *base = chip->base;
++	u32 old_gpcon = __raw_readl(base + OFFS_CON);
++	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++	u32 gps_gpcon = chip->pm_save[0];
++	u32 gps_gpdat = chip->pm_save[1];
++	u32 gpcon, old, new, mask;
++	u32 change_mask = 0x0;
++	int nr;
++
++	/* restore GPIO pull-up settings */
++	__raw_writel(chip->pm_save[2], base + OFFS_UP);
++
++	/* Create a change_mask of all the items that need to have
++	 * their CON value changed before their DAT value, so that
++	 * we minimise the work between the two settings.
++	 */
++
++	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
++		old = (old_gpcon & mask) >> nr;
++		new = (gps_gpcon & mask) >> nr;
++
++		/* If there is no change, then skip */
++
++		if (old == new)
++			continue;
++
++		/* If both are special function, then skip */
++
++		if (is_sfn(old) && is_sfn(new))
++			continue;
++
++		/* Change is IN => OUT, do not change now */
++
++		if (is_in(old) && is_out(new))
++			continue;
++
++		/* Change is SFN => OUT, do not change now */
++
++		if (is_sfn(old) && is_out(new))
++			continue;
++
++		/* We should now be at the case of IN=>SFN,
++		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++		change_mask |= mask;
++	}
++
++
++	/* Write the new CON settings */
++
++	gpcon = old_gpcon & ~change_mask;
++	gpcon |= gps_gpcon & change_mask;
++
++	__raw_writel(gpcon, base + OFFS_CON);
++
++	/* Now change any items that require DAT,CON */
++
++	__raw_writel(gps_gpdat, base + OFFS_DAT);
++	__raw_writel(gps_gpcon, base + OFFS_CON);
++
++	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_2bit = {
++	.save	= s3c_gpio_pm_2bit_save,
++	.resume = s3c_gpio_pm_2bit_resume,
++};
++
++#ifdef CONFIG_ARCH_S3C64XX
++static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
++{
++	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
++	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
++	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
++
++	if (chip->chip.ngpio > 8)
++		chip->pm_save[0] = __raw_readl(chip->base - 4);
++}
++
++static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
++{
++	u32 old, new, mask;
++	u32 change_mask = 0x0;
++	int nr;
++
++	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
++		old = (old_gpcon & mask) >> nr;
++		new = (gps_gpcon & mask) >> nr;
++
++		/* If there is no change, then skip */
++
++		if (old == new)
++			continue;
++
++		/* If both are special function, then skip */
++
++		if (is_sfn(old) && is_sfn(new))
++			continue;
++
++		/* Change is IN => OUT, do not change now */
++
++		if (is_in(old) && is_out(new))
++			continue;
++
++		/* Change is SFN => OUT, do not change now */
++
++		if (is_sfn(old) && is_out(new))
++			continue;
++
++		/* We should now be at the case of IN=>SFN,
++		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++		change_mask |= mask;
++	}
++
++	return change_mask;
++}
++
++static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
++{
++	void __iomem *con = chip->base + (index * 4);
++	u32 old_gpcon = __raw_readl(con);
++	u32 gps_gpcon = chip->pm_save[index + 1];
++	u32 gpcon, mask;
++
++	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
++
++	gpcon = old_gpcon & ~mask;
++	gpcon |= gps_gpcon & mask;
++
++	__raw_writel(gpcon, con);
++}
++
++static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
++{
++	void __iomem *base = chip->base;
++	u32 old_gpcon[2];
++	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++	u32 gps_gpdat = chip->pm_save[2];
++
++	/* First, modify the CON settings */
++
++	old_gpcon[0] = 0;
++	old_gpcon[1] = __raw_readl(base + OFFS_CON);
++
++	s3c_gpio_pm_4bit_con(chip, 0);
++	if (chip->chip.ngpio > 8) {
++		old_gpcon[0] = __raw_readl(base - 4);
++		s3c_gpio_pm_4bit_con(chip, -1);
++	}
++
++	/* Now change the configurations that require DAT,CON */
++
++	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
++	__raw_writel(chip->pm_save[1], base + OFFS_CON);
++	if (chip->chip.ngpio > 8)
++		__raw_writel(chip->pm_save[0], base - 4);
++
++	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
++	__raw_writel(chip->pm_save[3], base + OFFS_UP);
++
++	if (chip->chip.ngpio > 8) {
++		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
++			  chip->chip.label, old_gpcon[0], old_gpcon[1],
++			  __raw_readl(base - 4),
++			  __raw_readl(base + OFFS_CON),
++			  old_gpdat, gps_gpdat);
++	} else
++		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
++			  chip->chip.label, old_gpcon[1],
++			  __raw_readl(base + OFFS_CON),
++			  old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_4bit = {
++	.save	= s3c_gpio_pm_4bit_save,
++	.resume = s3c_gpio_pm_4bit_resume,
++};
++#endif /* CONFIG_ARCH_S3C64XX */
++
++/**
++ * s3c_pm_save_gpio() - save gpio chip data for suspend
++ * @ourchip: The chip for suspend.
++ */
++static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
++{
++	struct s3c_gpio_pm *pm = ourchip->pm;
++
++	if (pm == NULL || pm->save == NULL)
++		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++	else
++		pm->save(ourchip);
++}
++
++/**
++ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
++ *
++ * For all the GPIO banks, save the state of each one ready for going
++ * into a suspend mode.
++ */
++void s3c_pm_save_gpios(void)
++{
++	struct s3c_gpio_chip *ourchip;
++	unsigned int gpio_nr;
++
++	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++		ourchip = s3c_gpiolib_getchip(gpio_nr);
++		if (!ourchip)
++			continue;
++
++		s3c_pm_save_gpio(ourchip);
++
++		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
++			  ourchip->chip.label,
++			  ourchip->pm_save[0],
++			  ourchip->pm_save[1],
++			  ourchip->pm_save[2],
++			  ourchip->pm_save[3]);
++
++		gpio_nr += ourchip->chip.ngpio;
++		gpio_nr += CONFIG_S3C_GPIO_SPACE;
++	}
++}
++
++/**
++ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
++ * @ourchip: The suspended chip.
++ */
++static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
++{
++	struct s3c_gpio_pm *pm = ourchip->pm;
++
++	if (pm == NULL || pm->resume == NULL)
++		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++	else
++		pm->resume(ourchip);
++}
++
++void s3c_pm_restore_gpios(void)
++{
++	struct s3c_gpio_chip *ourchip;
++	unsigned int gpio_nr;
++
++	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++		ourchip = s3c_gpiolib_getchip(gpio_nr);
++		if (!ourchip)
++			continue;
++
++		s3c_pm_resume_gpio(ourchip);
++
++		gpio_nr += ourchip->chip.ngpio;
++		gpio_nr += CONFIG_S3C_GPIO_SPACE;
++	}
++}
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/clock-dclk.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/clock-dclk.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/clock-dclk.c	2009-05-18 19:07:48.000000000 +0200
+@@ -18,6 +18,7 @@
+ 
+ #include <mach/regs-clock.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+ 
+ #include <plat/clock.h>
+ #include <plat/cpu.h>
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/cpu.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/cpu.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/cpu.c	2009-05-18 19:07:48.000000000 +0200
+@@ -61,6 +61,7 @@
+ static const char name_s3c2412[]  = "S3C2412";
+ static const char name_s3c2440[]  = "S3C2440";
+ static const char name_s3c2442[]  = "S3C2442";
++static const char name_s3c2442b[]  = "S3C2442B";
+ static const char name_s3c2443[]  = "S3C2443";
+ static const char name_s3c2410a[] = "S3C2410A";
+ static const char name_s3c2440a[] = "S3C2440A";
+@@ -112,6 +113,15 @@
+ 		.name		= name_s3c2442
+ 	},
+ 	{
++		.idcode		= 0x32440aab,
++		.idmask		= 0xffffffff,
++		.map_io		= s3c244x_map_io,
++		.init_clocks	= s3c244x_init_clocks,
++		.init_uarts	= s3c244x_init_uarts,
++		.init		= s3c2442_init,
++		.name		= name_s3c2442b
++	},
++	{
+ 		.idcode		= 0x32412001,
+ 		.idmask		= 0xffffffff,
+ 		.map_io		= s3c2412_map_io,
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/gpiolib.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/gpiolib.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/gpiolib.c	2009-05-18 19:07:48.000000000 +0200
+@@ -19,9 +19,10 @@
+ #include <linux/io.h>
+ #include <linux/gpio.h>
+ 
+-#include <mach/gpio-core.h>
++#include <plat/gpio-core.h>
+ #include <mach/hardware.h>
+ #include <asm/irq.h>
++#include <plat/pm.h>
+ 
+ #include <mach/regs-gpio.h>
+ 
+@@ -78,6 +79,7 @@
+ struct s3c_gpio_chip s3c24xx_gpios[] = {
+ 	[0] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPA0,
+ 			.owner			= THIS_MODULE,
+@@ -89,6 +91,7 @@
+ 	},
+ 	[1] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPB0,
+ 			.owner			= THIS_MODULE,
+@@ -98,6 +101,7 @@
+ 	},
+ 	[2] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPC0,
+ 			.owner			= THIS_MODULE,
+@@ -107,6 +111,7 @@
+ 	},
+ 	[3] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPD0,
+ 			.owner			= THIS_MODULE,
+@@ -116,6 +121,7 @@
+ 	},
+ 	[4] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPE0,
+ 			.label			= "GPIOE",
+@@ -125,6 +131,7 @@
+ 	},
+ 	[5] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPF0,
+ 			.owner			= THIS_MODULE,
+@@ -135,12 +142,23 @@
+ 	},
+ 	[6] = {
+ 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+ 		.chip	= {
+ 			.base			= S3C2410_GPG0,
+ 			.owner			= THIS_MODULE,
+ 			.label			= "GPIOG",
+-			.ngpio			= 10,
+ 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
++			.ngpio			= 16,
++		},
++	},
++	[7] = {
++		.base	= S3C24XX_GPIO_BASE(S3C2410_GPH0),
++		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
++		.chip	= {
++			.base			= S3C2410_GPH0,
++			.owner			= THIS_MODULE,
++			.label			= "GPIOH",
++			.ngpio			= 11,
+ 		},
+ 	},
+ };
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/pm-core.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/pm-core.h	2009-05-18 19:07:48.000000000 +0200
+@@ -57,3 +57,8 @@
+ 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ 				s3c_irqwake_eintmask);
+ }
++
++static inline void s3c_pm_arch_update_uart(void __iomem *regs,
++					   struct pm_uart_save *save)
++{
++}
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq-pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/irq-pm.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq-pm.c	2009-05-18 19:07:48.000000000 +0200
+@@ -15,6 +15,7 @@
+ #include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/sysdev.h>
++#include <linux/irq.h>
+ 
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -80,7 +81,9 @@
+ 
+ int s3c24xx_irq_resume(struct sys_device *dev)
+ {
+-	unsigned int i;
++	unsigned int i, irq;
++	unsigned long eintpnd;
++	struct irq_desc *desc;
+ 
+ 	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ 		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+@@ -91,5 +94,25 @@
+ 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ 	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+ 
++	/*
++	 * ACK those interrupts which are now masked and pending.
++	 * Level interrupts if not ACKed here, create an interrupt storm
++	 * because they are not handled at all.
++	 */
++
++	eintpnd = __raw_readl(S3C24XX_EINTPEND);
++
++	eintpnd &= save_eintmask;
++	eintpnd &= ~0xff;	/* ignore lower irqs */
++
++	while (eintpnd) {
++		irq = __ffs(eintpnd);
++		eintpnd &= ~(1 << irq);
++
++		irq += (IRQ_EINT4 - 4);
++		desc = irq_to_desc(irq);
++		desc->chip->ack(irq);
++	}
++
+ 	return 0;
+ }
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/pm.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pm.c	2009-05-18 19:07:48.000000000 +0200
+@@ -39,6 +39,7 @@
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-irq.h>
++#include <mach/hardware.h>
+ 
+ #include <asm/mach/time.h>
+ 
+@@ -75,43 +76,10 @@
+ 	SAVE_ITEM(S3C2410_CLKSLOW),
+ };
+ 
+-static struct gpio_sleep {
+-	void __iomem	*base;
+-	unsigned int	 gpcon;
+-	unsigned int	 gpdat;
+-	unsigned int	 gpup;
+-} gpio_save[] = {
+-	[0] = {
+-		.base	= S3C2410_GPACON,
+-	},
+-	[1] = {
+-		.base	= S3C2410_GPBCON,
+-	},
+-	[2] = {
+-		.base	= S3C2410_GPCCON,
+-	},
+-	[3] = {
+-		.base	= S3C2410_GPDCON,
+-	},
+-	[4] = {
+-		.base	= S3C2410_GPECON,
+-	},
+-	[5] = {
+-		.base	= S3C2410_GPFCON,
+-	},
+-	[6] = {
+-		.base	= S3C2410_GPGCON,
+-	},
+-	[7] = {
+-		.base	= S3C2410_GPHCON,
+-	},
+-};
+-
+ static struct sleep_save misc_save[] = {
+ 	SAVE_ITEM(S3C2410_DCLKCON),
+ };
+ 
+-
+ /* s3c_pm_check_resume_pin
+  *
+  * check to see if the pin is configured correctly for sleep mode, and
+@@ -165,186 +133,6 @@
+ 	}
+ }
+ 
+-/* offsets for CON/DAT/UP registers */
+-
+-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
+-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
+-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
+-
+-/* s3c_pm_save_gpios()
+- *
+- * Save the state of the GPIOs
+- */
+-
+-void s3c_pm_save_gpios(void)
+-{
+-	struct gpio_sleep *gps = gpio_save;
+-	unsigned int gpio;
+-
+-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+-		void __iomem *base = gps->base;
+-
+-		gps->gpcon = __raw_readl(base + OFFS_CON);
+-		gps->gpdat = __raw_readl(base + OFFS_DAT);
+-
+-		if (gpio > 0)
+-			gps->gpup = __raw_readl(base + OFFS_UP);
+-
+-	}
+-}
+-
+-/* Test whether the given masked+shifted bits of an GPIO configuration
+- * are one of the SFN (special function) modes. */
+-
+-static inline int is_sfn(unsigned long con)
+-{
+-	return (con == 2 || con == 3);
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an input */
+-
+-static inline int is_in(unsigned long con)
+-{
+-	return con == 0;
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an output */
+-
+-static inline int is_out(unsigned long con)
+-{
+-	return con == 1;
+-}
+-
+-/**
+- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
+- * @index: The number of the GPIO bank being resumed.
+- * @gps: The sleep confgiuration for the bank.
+- *
+- * Restore one of the GPIO banks that was saved during suspend. This is
+- * not as simple as once thought, due to the possibility of glitches
+- * from the order that the CON and DAT registers are set in.
+- *
+- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+- * combinations of changes to check. Three of these, if the pin stays
+- * in the same configuration can be discounted. This leaves us with
+- * the following:
+- *
+- * { IN => OUT }  Change DAT first
+- * { IN => SFN }  Change CON first
+- * { OUT => SFN } Change CON first, so new data will not glitch
+- * { OUT => IN }  Change CON first, so new data will not glitch
+- * { SFN => IN }  Change CON first
+- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+- *
+- * We do not currently deal with the UP registers as these control
+- * weak resistors, so a small delay in change should not need to bring
+- * these into the calculations.
+- *
+- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+- *     state for when it is next output.
+- */
+-
+-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+-{
+-	void __iomem *base = gps->base;
+-	unsigned long gps_gpcon = gps->gpcon;
+-	unsigned long gps_gpdat = gps->gpdat;
+-	unsigned long old_gpcon;
+-	unsigned long old_gpdat;
+-	unsigned long old_gpup = 0x0;
+-	unsigned long gpcon;
+-	int nr;
+-
+-	old_gpcon = __raw_readl(base + OFFS_CON);
+-	old_gpdat = __raw_readl(base + OFFS_DAT);
+-
+-	if (base == S3C2410_GPACON) {
+-		/* GPACON only has one bit per control / data and no PULLUPs.
+-		 * GPACON[x] = 0 => Output, 1 => SFN */
+-
+-		/* first set all SFN bits to SFN */
+-
+-		gpcon = old_gpcon | gps->gpcon;
+-		__raw_writel(gpcon, base + OFFS_CON);
+-
+-		/* now set all the other bits */
+-
+-		__raw_writel(gps_gpdat, base + OFFS_DAT);
+-		__raw_writel(gps_gpcon, base + OFFS_CON);
+-	} else {
+-		unsigned long old, new, mask;
+-		unsigned long change_mask = 0x0;
+-
+-		old_gpup = __raw_readl(base + OFFS_UP);
+-
+-		/* Create a change_mask of all the items that need to have
+-		 * their CON value changed before their DAT value, so that
+-		 * we minimise the work between the two settings.
+-		 */
+-
+-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+-			old = (old_gpcon & mask) >> nr;
+-			new = (gps_gpcon & mask) >> nr;
+-
+-			/* If there is no change, then skip */
+-
+-			if (old == new)
+-				continue;
+-
+-			/* If both are special function, then skip */
+-
+-			if (is_sfn(old) && is_sfn(new))
+-				continue;
+-
+-			/* Change is IN => OUT, do not change now */
+-
+-			if (is_in(old) && is_out(new))
+-				continue;
+-
+-			/* Change is SFN => OUT, do not change now */
+-
+-			if (is_sfn(old) && is_out(new))
+-				continue;
+-
+-			/* We should now be at the case of IN=>SFN,
+-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+-
+-			change_mask |= mask;
+-		}
+-
+-		/* Write the new CON settings */
+-
+-		gpcon = old_gpcon & ~change_mask;
+-		gpcon |= gps_gpcon & change_mask;
+-
+-		__raw_writel(gpcon, base + OFFS_CON);
+-
+-		/* Now change any items that require DAT,CON */
+-
+-		__raw_writel(gps_gpdat, base + OFFS_DAT);
+-		__raw_writel(gps_gpcon, base + OFFS_CON);
+-		__raw_writel(gps->gpup, base + OFFS_UP);
+-	}
+-
+-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+-}
+-
+-
+-/** s3c2410_pm_restore_gpios()
+- *
+- * Restore the state of the GPIOs
+- */
+-
+-void s3c_pm_restore_gpios(void)
+-{
+-	struct gpio_sleep *gps = gpio_save;
+-	int gpio;
+-
+-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+-		s3c2410_pm_restore_gpio(gpio, gps);
+-	}
+-}
+ 
+ void s3c_pm_restore_core(void)
+ {
+Index: linux-2.6.30-rc6/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/Kconfig	2009-05-18 19:07:38.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/Kconfig	2009-05-18 19:07:48.000000000 +0200
+@@ -37,13 +37,6 @@
+ 
+ 	  If unsure, say N.
+ 
+-config MMC_SDHCI_IO_ACCESSORS
+-	bool
+-	depends on MMC_SDHCI
+-	help
+-	  This is silent Kconfig symbol that is selected by the drivers that
+-	  need to overwrite SDHCI IO memory accessors.
+-
+ config MMC_SDHCI_PCI
+ 	tristate "SDHCI support on PCI bus"
+ 	depends on MMC_SDHCI && PCI
+@@ -55,6 +48,18 @@
+ 
+ 	  If unsure, say N.
+ 
++config MMC_SDHCI_S3C
++	tristate "SDHCI support on Samsung S3C SoC"
++	depends on MMC_SDHCI && PLAT_S3C24XX
++	help
++	  This selects the Secure Digital Host Controller Interface (SDHCI)
++	  often referrered to as the HSMMC block in some of the Samsung S3C
++	  range of SoC.
++
++	  If you have a controller with this interface, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_RICOH_MMC
+ 	tristate "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
+ 	depends on MMC_SDHCI_PCI
+@@ -72,17 +77,6 @@
+ 
+ 	  If unsure, say Y.
+ 
+-config MMC_SDHCI_OF
+-	tristate "SDHCI support on OpenFirmware platforms"
+-	depends on MMC_SDHCI && PPC_OF
+-	select MMC_SDHCI_IO_ACCESSORS
+-	help
+-	  This selects the OF support for Secure Digital Host Controller
+-	  Interfaces. So far, only the Freescale eSDHC controller is known
+-	  to exist on OF platforms.
+-
+-	  If unsure, say N.
+-
+ config MMC_OMAP
+ 	tristate "TI OMAP Multimedia Card Interface support"
+ 	depends on ARCH_OMAP
+@@ -163,16 +157,6 @@
+ 
+ 	  If unsure, say N.
+ 
+-config MMC_MXC
+-	tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+-	depends on ARCH_MXC
+-	help
+-	  This selects the Freescale i.MX2/3 Multimedia card Interface.
+-	  If you have a i.MX platform with a Multimedia Card slot,
+-	  say Y or M here.
+-
+-	  If unsure, say N.
+-
+ config MMC_TIFM_SD
+ 	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL && PCI
+Index: linux-2.6.30-rc6/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/Makefile	2009-05-18 19:07:38.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/Makefile	2009-05-18 19:07:48.000000000 +0200
+@@ -9,11 +9,10 @@
+ obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
+ obj-$(CONFIG_MMC_PXA)		+= pxamci.o
+ obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
+-obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
+ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
+ obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
++obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
+ obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
+-obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+@@ -21,7 +20,6 @@
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+ obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+-obj-$(CONFIG_MMC_MVSDIO)	+= mvsdio.o
+ obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+ ifeq ($(CONFIG_OF),y)
+ obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
+Index: linux-2.6.30-rc6/drivers/mmc/host/s3cmci.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/s3cmci.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/s3cmci.c	2009-05-18 19:07:48.000000000 +0200
+@@ -2,6 +2,7 @@
+  *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+  *
+  *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ *  Copyright (C) 2007 Harald Welte <laforge@gnumonks.org>
+  *
+  * Current driver maintained by Ben Dooks and Simtec Electronics
+  *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
+@@ -24,9 +25,18 @@
+ 
+ #include <mach/regs-sdi.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+ 
+ #include <plat/mci.h>
+ 
++#include <asm/dma.h>
++#include <asm/dma-mapping.h>
++
++#include <asm/io.h>
++#include <mach/regs-gpio.h>
++#include <mach/mci.h>
++#include <mach/dma.h>
++
+ #include "s3cmci.h"
+ 
+ #define DRIVER_NAME "s3c-mci"
+@@ -47,6 +57,9 @@
+ static const int dbgmap_info  = dbg_info | dbg_conf;
+ static const int dbgmap_debug = dbg_err | dbg_debug;
+ 
++static int f_max = -1; /* override maximum frequency limit */
++static int persist; /* keep interface alive across suspend/resume */
++
+ #define dbg(host, channels, args...)		  \
+ 	do {					  \
+ 	if (dbgmap_err & channels) 		  \
+@@ -280,8 +293,11 @@
+ 		 * an even multiple of 4. */
+ 		if (fifo >= host->pio_bytes)
+ 			fifo = host->pio_bytes;
+-		else
++		else {
+ 			fifo -= fifo & 3;
++			if (!fifo)
++				break;
++		}
+ 
+ 		host->pio_bytes -= fifo;
+ 		host->pio_count += fifo;
+@@ -329,7 +345,7 @@
+ 
+ 	to_ptr = host->base + host->sdidata;
+ 
+-	while ((fifo = fifo_free(host)) > 3) {
++	while ((fifo = fifo_free(host))) {
+ 		if (!host->pio_bytes) {
+ 			res = get_data_buffer(host, &host->pio_bytes,
+ 							&host->pio_ptr);
+@@ -353,8 +369,11 @@
+ 		 * words, so round down to an even multiple of 4. */
+ 		if (fifo >= host->pio_bytes)
+ 			fifo = host->pio_bytes;
+-		else
++		else {
+ 			fifo -= fifo & 3;
++			if (!fifo)
++				break;
++		}
+ 
+ 		host->pio_bytes -= fifo;
+ 		host->pio_count += fifo;
+@@ -373,7 +392,6 @@
+ {
+ 	struct s3cmci_host *host = (struct s3cmci_host *) data;
+ 
+-
+ 	disable_irq(host->irq);
+ 
+ 	if (host->pio_active == XFER_WRITE)
+@@ -614,7 +632,6 @@
+ 
+ 	spin_unlock_irqrestore(&host->complete_lock, iflags);
+ 	return IRQ_HANDLED;
+-
+ }
+ 
+ /*
+@@ -789,11 +806,11 @@
+ 
+ 	last_source = source;
+ 
+-	s3c2410_dma_devconfig(host->dma, source, 3,
++	s3c2410_dma_devconfig(host->dma, source,
+ 			      host->mem->start + host->sdidata);
+ 
+ 	if (!setup_ok) {
+-		s3c2410_dma_config(host->dma, 4, 0);
++		s3c2410_dma_config(host->dma, 4);
+ 		s3c2410_dma_set_buffdone_fn(host->dma,
+ 					    s3cmci_dma_done_callback);
+ 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+@@ -1026,6 +1043,7 @@
+ 			dbg(host, dbg_err, "data prepare error %d\n", res);
+ 			cmd->error = res;
+ 			cmd->data->error = res;
++			cmd->data->error = -EIO;
+ 
+ 			mmc_request_done(mmc, mrq);
+ 			return;
+@@ -1263,10 +1281,8 @@
+ 	host->is2440	= is2440;
+ 
+ 	host->pdata = pdev->dev.platform_data;
+-	if (!host->pdata) {
+-		pdev->dev.platform_data = &s3cmci_def_pdata;
++	if (!host->pdata)
+ 		host->pdata = &s3cmci_def_pdata;
+-	}
+ 
+ 	spin_lock_init(&host->complete_lock);
+ 	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+@@ -1379,6 +1395,18 @@
+ 	mmc->f_min 	= host->clk_rate / (host->clk_div * 256);
+ 	mmc->f_max 	= host->clk_rate / host->clk_div;
+ 
++	if (f_max >= 0) {
++		unsigned f = f_max;
++
++		if (f < mmc->f_min)
++			f = mmc->f_min;
++		if (mmc->f_max > f) {
++			dev_info(&pdev->dev, "f_max lowered from %u to %u Hz\n",
++			    mmc->f_max, f);
++			mmc->f_max = f;
++		}
++	}
++
+ 	if (host->pdata->ocr_avail)
+ 		mmc->ocr_avail = host->pdata->ocr_avail;
+ 
+@@ -1491,18 +1519,60 @@
+ 
+ #ifdef CONFIG_PM
+ 
++static int save_regs(struct mmc_host *mmc)
++{
++	struct s3cmci_host *host = mmc_priv(mmc);
++	unsigned long flags;
++	unsigned from;
++	u32 *to = host->saved;
++
++	mmc_flush_scheduled_work();
++
++	local_irq_save(flags);
++	for (from = S3C2410_SDICON; from != S3C2410_SDIIMSK+4; from += 4)
++		if (from != host->sdidata)
++			*to++ = readl(host->base + from);
++	BUG_ON(to-host->saved != ARRAY_SIZE(host->saved));
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++static int restore_regs(struct mmc_host *mmc)
++{
++	struct s3cmci_host *host = mmc_priv(mmc);
++	unsigned long flags;
++	unsigned to;
++	u32 *from = host->saved;
++
++	/*
++	 * Before we begin with the necromancy, make sure we don't
++	 * inadvertently start something we'll regret microseconds later.
++	 */
++	from[S3C2410_SDICMDCON - S3C2410_SDICON] = 0;
++
++	local_irq_save(flags);
++	for (to = S3C2410_SDICON; to != S3C2410_SDIIMSK+4; to += 4)
++		if (to != host->sdidata)
++			writel(*from++, host->base + to);
++	BUG_ON(from-host->saved != ARRAY_SIZE(host->saved));
++	local_irq_restore(flags);
++
++	return 0;
++}
++
+ static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ 	struct mmc_host *mmc = platform_get_drvdata(dev);
+ 
+-	return  mmc_suspend_host(mmc, state);
++	return persist ? save_regs(mmc) : mmc_suspend_host(mmc, state);
+ }
+ 
+ static int s3cmci_resume(struct platform_device *dev)
+ {
+ 	struct mmc_host *mmc = platform_get_drvdata(dev);
+ 
+-	return mmc_resume_host(mmc);
++	return persist ? restore_regs(mmc) : mmc_resume_host(mmc);
+ }
+ 
+ #else /* CONFIG_PM */
+@@ -1560,9 +1630,13 @@
+ module_init(s3cmci_init);
+ module_exit(s3cmci_exit);
+ 
++module_param(f_max, int, 0644);
++module_param(persist, int, 0644);
++
+ MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+ MODULE_LICENSE("GPL v2");
+ MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
+ MODULE_ALIAS("platform:s3c2410-sdi");
+ MODULE_ALIAS("platform:s3c2412-sdi");
+ MODULE_ALIAS("platform:s3c2440-sdi");
++
+Index: linux-2.6.30-rc6/drivers/mmc/host/s3cmci.h
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/s3cmci.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/s3cmci.h	2009-05-18 19:07:48.000000000 +0200
+@@ -8,6 +8,10 @@
+  * published by the Free Software Foundation.
+  */
+ 
++
++#include <mach/regs-sdi.h>
++#include <linux/regulator/consumer.h>
++
+ /* FIXME: DMA Resource management ?! */
+ #define S3CMCI_DMA 0
+ 
+@@ -68,7 +72,16 @@
+ 	unsigned int		ccnt, dcnt;
+ 	struct tasklet_struct	pio_tasklet;
+ 
++	/*
++	 * Here's where we save the registers during suspend. Note that we skip
++	 * SDIDATA, which is at different positions on 2410 and 2440, so
++	 * there's no "+1" in the array size.
++	 */
++	u32			saved[(S3C2410_SDIIMSK-S3C2410_SDICON)/4];
++
+ #ifdef CONFIG_CPU_FREQ
+ 	struct notifier_block	freq_transition;
+ #endif
++
++	struct regulator *regulator;
+ };
+Index: linux-2.6.30-rc6/drivers/mmc/host/sdhci-s3c.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/drivers/mmc/host/sdhci-s3c.c	2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,419 @@
++/* linux/drivers/mmc/host/sdhci-s3c.c
++ *
++ * Copyright 2008 Openmoko Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * SDHCI (HSMMC) support for Samsung SoC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++
++#include <linux/mmc/host.h>
++
++#include <plat/regs-sdhci.h>
++#include <plat/sdhci.h>
++
++#include "sdhci.h"
++
++#define MAX_BUS_CLK	(4)
++
++struct sdhci_s3c {
++	struct sdhci_host	*host;
++	struct platform_device	*pdev;
++	struct resource		*ioarea;
++	struct s3c_sdhci_platdata *pdata;
++	unsigned int		cur_clk;
++
++	struct clk		*clk_io;	/* clock for io bus */
++	struct clk		*clk_bus[MAX_BUS_CLK];
++};
++
++static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
++{
++	return sdhci_priv(host);
++}
++
++static u32 get_curclk(u32 ctrl2)
++{
++	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++	ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++
++	return ctrl2;
++}
++
++static void sdhci_s3c_check_sclk(struct sdhci_host *host)
++{
++	struct sdhci_s3c *ourhost = to_s3c(host);
++	u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++
++	if (get_curclk(tmp) != ourhost->cur_clk) {
++		dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
++
++		tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++		tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++		writel(tmp, host->ioaddr + 0x80);
++	}
++}
++
++static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
++{
++	struct sdhci_s3c *ourhost = to_s3c(host);
++	struct clk *busclk;
++	unsigned int rate, max;
++	int clk;
++
++	/* note, a reset will reset the clock source */
++
++	sdhci_s3c_check_sclk(host);
++
++	for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
++		busclk = ourhost->clk_bus[clk];
++		if (!busclk)
++			continue;
++
++		rate = clk_get_rate(busclk);
++		if (rate > max)
++			max = rate;
++	}
++
++	return max;
++}
++
++static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
++{
++	return sdhci_s3c_get_max_clk(host) / 1000000;
++}
++
++static void sdhci_s3c_set_ios(struct sdhci_host *host,
++			      struct mmc_ios *ios)
++{
++	struct sdhci_s3c *ourhost = to_s3c(host);
++	struct s3c_sdhci_platdata *pdata = ourhost->pdata;
++	int width;
++
++	sdhci_s3c_check_sclk(host);
++
++	if (ios->power_mode != MMC_POWER_OFF) {
++		switch (ios->bus_width) {
++		case MMC_BUS_WIDTH_4:
++			width = 4;
++			break;
++		case MMC_BUS_WIDTH_1:
++			width = 1;
++			break;
++		default:
++			BUG();
++		}
++
++		if (pdata->cfg_gpio)
++			pdata->cfg_gpio(ourhost->pdev, width);
++	}
++
++	if (pdata->cfg_card)
++		pdata->cfg_card(ourhost->pdev, host->ioaddr,
++				ios, host->mmc->card);
++}
++
++static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
++					     unsigned int src,
++					     unsigned int wanted)
++{
++	unsigned long rate;
++	struct clk *clksrc = ourhost->clk_bus[src];
++	int div;
++
++	if (!clksrc)
++		return UINT_MAX;
++
++	rate = clk_get_rate(clksrc);
++
++	for (div = 1; div < 256; div *= 2) {
++		if ((rate / div) <= wanted)
++			break;
++	}
++
++	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
++		src, rate, wanted, rate / div);
++
++	return (wanted - (rate / div));
++}
++
++static void sdhci_s3c_change_clock(struct sdhci_host *host, unsigned int clock)
++{
++	struct sdhci_s3c *ourhost = to_s3c(host);
++	unsigned int best = UINT_MAX;
++	unsigned int delta;
++	int best_src = 0;
++	int src;
++	u32 ctrl;
++
++	for (src = 0; src < MAX_BUS_CLK; src++) {
++		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
++		if (delta < best) {
++			best = delta;
++			best_src = src;
++		}
++	}
++
++	dev_dbg(&ourhost->pdev->dev,
++		"selected source %d, clock %d, delta %d\n",
++		 best_src, clock, best);
++
++	/* turn clock off to card before changing clock source */
++	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
++
++	/* select the new clock source */
++
++	if (ourhost->cur_clk != best_src) {
++		struct clk *clk = ourhost->clk_bus[best_src];
++
++		ourhost->cur_clk = best_src;
++		host->max_clk = clk_get_rate(clk);
++		host->timeout_clk = host->max_clk / 1000000;
++
++		ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++		ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++		ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++		writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
++	}
++
++	sdhci_change_clock(host, clock);
++}
++
++static struct sdhci_ops sdhci_s3c_ops = {
++	.get_max_clock		= sdhci_s3c_get_max_clk,
++	.get_timeout_clock	= sdhci_s3c_get_timeout_clk,
++	.change_clock		= sdhci_s3c_change_clock,
++	.set_ios		= sdhci_s3c_set_ios,
++};
++
++/*
++ * call this when you need sd stack to recognize insertion or removal of card
++ * that can't be told by SDHCI regs
++ */
++
++void sdhci_s3c_force_presence_change(struct platform_device *pdev)
++{
++	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++
++	dev_info(&pdev->dev, "sdhci_s3c_force_presence_change called\n");
++	mmc_detect_change(pdata->sdhci_host->mmc, msecs_to_jiffies(200));
++}
++EXPORT_SYMBOL_GPL(sdhci_s3c_force_presence_change);
++
++
++static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
++{
++	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++	struct device *dev = &pdev->dev;
++	struct sdhci_host *host;
++	struct sdhci_s3c *sc;
++	struct resource *res;
++	int ret, irq, ptr, clks;
++
++	if (!pdata) {
++		dev_err(dev, "no device data specified\n");
++		return -ENOENT;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_err(dev, "no irq specified\n");
++		return irq;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(dev, "no memory specified\n");
++		return -ENOENT;
++	}
++
++	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
++	if (IS_ERR(host)) {
++		dev_err(dev, "sdhci_alloc_host() failed\n");
++		return PTR_ERR(host);
++	}
++
++	pdata->sdhci_host = host;
++
++	sc = sdhci_priv(host);
++
++	sc->host = host;
++	sc->pdev = pdev;
++	sc->pdata = pdata;
++
++	platform_set_drvdata(pdev, host);
++
++	sc->clk_io = clk_get(dev, "hsmmc");
++	if (IS_ERR(sc->clk_io)) {
++		dev_err(dev, "failed to get io clock\n");
++		ret = PTR_ERR(sc->clk_io);
++		goto err_io_clk;
++	}
++
++	/* enable the local io clock and keep it running for the moment. */
++	clk_enable(sc->clk_io);
++
++	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++		struct clk *clk;
++		char *name = pdata->clocks[ptr];
++
++		if (name == NULL)
++			continue;
++
++		clk = clk_get(dev, name);
++		if (IS_ERR(clk)) {
++			dev_err(dev, "failed to get clock %s\n", name);
++			continue;
++		}
++
++		clks++;
++		sc->clk_bus[ptr] = clk;
++		clk_enable(clk);
++
++		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
++			 ptr, name, clk_get_rate(clk));
++	}
++
++	if (clks == 0) {
++		dev_err(dev, "failed to find any bus clocks\n");
++		ret = -ENOENT;
++		goto err_no_busclks;
++	}
++
++	sc->ioarea = request_mem_region(res->start, resource_size(res),
++					mmc_hostname(host->mmc));
++	if (!sc->ioarea) {
++		dev_err(dev, "failed to reserve register area\n");
++		ret = -ENXIO;
++		goto err_req_regs;
++	}
++
++	host->ioaddr = ioremap_nocache(res->start, resource_size(res));
++	if (!host->ioaddr) {
++		dev_err(dev, "failed to map registers\n");
++		ret = -ENXIO;
++		goto err_req_regs;
++	}
++
++	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
++	if (pdata->cfg_gpio)
++		pdata->cfg_gpio(pdev, 0);
++
++	sdhci_s3c_check_sclk(host);
++
++	host->hw_name = "samsung-hsmmc";
++	host->ops = &sdhci_s3c_ops;
++	host->quirks = 0;
++	host->irq = irq;
++
++	/* Setup quirks for the controller */
++
++	/* Currently with ADMA enabled we are getting some length
++	 * interrupts that are not being dealt with, do disable
++	 * ADMA until this is sorted out. */
++	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
++	host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
++
++	/* It seems we do not get an DATA transfer complete on non-busy
++	 * transfers, not sure if this is a problem with this specific
++	 * SDHCI block, or a missing configuration that needs to be set. */
++	host->quirks |= SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY;
++
++	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
++			 SDHCI_QUIRK_32BIT_DMA_SIZE);
++
++	ret = sdhci_add_host(host);
++	if (ret) {
++		dev_err(dev, "sdhci_add_host() failed\n");
++		goto err_add_host;
++	}
++
++	return 0;
++
++ err_add_host:
++	release_resource(sc->ioarea);
++	kfree(sc->ioarea);
++
++ err_req_regs:
++	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++		clk_disable(sc->clk_bus[ptr]);
++		clk_put(sc->clk_bus[ptr]);
++	}
++
++ err_no_busclks:
++	clk_disable(sc->clk_io);
++	clk_put(sc->clk_io);
++
++ err_io_clk:
++	sdhci_free_host(host);
++
++	return ret;
++}
++
++static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
++{
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
++{
++	struct sdhci_host *host = platform_get_drvdata(dev);
++
++	sdhci_suspend_host(host, pm);
++	return 0;
++}
++
++static int sdhci_s3c_resume(struct platform_device *dev)
++{
++	struct sdhci_host *host = platform_get_drvdata(dev);
++
++	sdhci_resume_host(host);
++	return 0;
++}
++
++#else
++#define sdhci_s3c_suspend NULL
++#define sdhci_s3c_resume NULL
++#endif
++
++static struct platform_driver sdhci_s3c_driver = {
++	.probe		= sdhci_s3c_probe,
++	.remove		= __devexit_p(sdhci_s3c_remove),
++	.suspend	= sdhci_s3c_suspend,
++	.resume	        = sdhci_s3c_resume,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "s3c-sdhci",
++	},
++};
++
++static int __init sdhci_s3c_init(void)
++{
++	return platform_driver_register(&sdhci_s3c_driver);
++}
++
++static void __exit sdhci_s3c_exit(void)
++{
++	platform_driver_unregister(&sdhci_s3c_driver);
++}
++
++module_init(sdhci_s3c_init);
++module_exit(sdhci_s3c_exit);
++
++MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
++MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:s3c-sdhci");
+Index: linux-2.6.30-rc6/drivers/mtd/nand/s3c2410.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mtd/nand/s3c2410.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mtd/nand/s3c2410.c	2009-05-18 19:07:48.000000000 +0200
+@@ -438,7 +438,7 @@
+ 	if ((diff0 & ~(1<<fls(diff0))) == 0)
+ 		return 1;
+ 
+-	return -1;
++	return -EBADMSG;
+ }
+ 
+ /* ECC functions
+@@ -530,7 +530,12 @@
+ static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+ 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
++	u8 *ptr = buf + (len & ~3);
++	int i;
++
+ 	readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
++	for (i = 0; i != (len & 3); i++)
++		ptr[i] = readb(info->regs + S3C2440_NFDATA);
+ }
+ 
+ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+@@ -645,17 +650,31 @@
+ }
+ 
+ #ifdef CONFIG_MTD_PARTITIONS
++const char *part_probes[] = { "cmdlinepart", NULL };
+ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+ 				      struct s3c2410_nand_mtd *mtd,
+ 				      struct s3c2410_nand_set *set)
+ {
++	struct mtd_partition *part_info;
++	int nr_part = 0;
++
+ 	if (set == NULL)
+ 		return add_mtd_device(&mtd->mtd);
+ 
+-	if (set->nr_partitions > 0 && set->partitions != NULL) {
+-		return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
++	if (set->nr_partitions == 0) {
++		mtd->mtd.name = set->name;
++		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
++						&part_info, 0);
++	} else {
++		if (set->nr_partitions > 0 && set->partitions != NULL) {
++			nr_part = set->nr_partitions;
++			part_info = set->partitions;
++		}
+ 	}
+ 
++	if (nr_part > 0 && part_info)
++		return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
++
+ 	return add_mtd_device(&mtd->mtd);
+ }
+ #else
+@@ -684,9 +703,13 @@
+ 	chip->select_chip  = s3c2410_nand_select_chip;
+ 	chip->chip_delay   = 50;
+ 	chip->priv	   = nmtd;
+-	chip->options	   = 0;
+ 	chip->controller   = &info->controller;
+ 
++	if (set->flags & S3C2410_NAND_BBT)
++		chip->options	   = NAND_USE_FLASH_BBT;
++	else
++		chip->options	   = 0;
++
+ 	switch (info->cpu_type) {
+ 	case TYPE_S3C2410:
+ 		chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+@@ -726,7 +749,7 @@
+ 	nmtd->mtd.owner    = THIS_MODULE;
+ 	nmtd->set	   = set;
+ 
+-	if (hardware_ecc) {
++	if (!info->platform->software_ecc && hardware_ecc) {
+ 		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ 		chip->ecc.correct   = s3c2410_nand_correct_data;
+ 		chip->ecc.mode	    = NAND_ECC_HW;
+Index: linux-2.6.30-rc6/drivers/mmc/core/core.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/core/core.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/core/core.c	2009-05-18 19:07:48.000000000 +0200
+@@ -59,10 +59,11 @@
+ /*
+  * Internal function. Flush all scheduled work from the MMC work queue.
+  */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+ 	flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL_GPL(mmc_flush_scheduled_work);
+ 
+ /**
+  *	mmc_request_done - finish processing an MMC request
diff --git a/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch b/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch
new file mode 100644
index 0000000..6ed16f5
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch
@@ -0,0 +1,1318 @@
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/dma.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/include/mach/dma.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/dma.h	2009-05-18 19:08:29.000000000 +0200
+@@ -3,7 +3,7 @@
+  * Copyright (C) 2003,2004,2006 Simtec Electronics
+  *	Ben Dooks <ben@simtec.co.uk>
+  *
+- * Samsung S3C241XX DMA support
++ * Samsung S3C24XX DMA support
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+@@ -13,8 +13,8 @@
+ #ifndef __ASM_ARCH_DMA_H
+ #define __ASM_ARCH_DMA_H __FILE__
+ 
++#include <plat/dma.h>
+ #include <linux/sysdev.h>
+-#include <mach/hardware.h>
+ 
+ #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+ 
+@@ -55,9 +55,9 @@
+ 
+ /* we have 4 dma channels */
+ #ifndef CONFIG_CPU_S3C2443
+-#define S3C2410_DMA_CHANNELS		(4)
++#define S3C_DMA_CHANNELS		(4)
+ #else
+-#define S3C2410_DMA_CHANNELS		(6)
++#define S3C_DMA_CHANNELS		(6)
+ #endif
+ 
+ /* types */
+@@ -68,7 +68,6 @@
+ 	S3C2410_DMA_PAUSED
+ };
+ 
+-
+ /* enum s3c2410_dma_loadst
+  *
+  * This represents the state of the DMA engine, wrt to the loaded / running
+@@ -104,32 +103,6 @@
+ 	S3C2410_DMALOAD_1LOADED_1RUNNING,
+ };
+ 
+-enum s3c2410_dma_buffresult {
+-	S3C2410_RES_OK,
+-	S3C2410_RES_ERR,
+-	S3C2410_RES_ABORT
+-};
+-
+-enum s3c2410_dmasrc {
+-	S3C2410_DMASRC_HW,		/* source is memory */
+-	S3C2410_DMASRC_MEM		/* source is hardware */
+-};
+-
+-/* enum s3c2410_chan_op
+- *
+- * operation codes passed to the DMA code by the user, and also used
+- * to inform the current channel owner of any changes to the system state
+-*/
+-
+-enum s3c2410_chan_op {
+-	S3C2410_DMAOP_START,
+-	S3C2410_DMAOP_STOP,
+-	S3C2410_DMAOP_PAUSE,
+-	S3C2410_DMAOP_RESUME,
+-	S3C2410_DMAOP_FLUSH,
+-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+-};
+ 
+ /* flags */
+ 
+@@ -137,19 +110,18 @@
+ 					    * waiting for reloads */
+ #define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+ 
++#define S3C2410_DMAF_CIRCULAR	  (0x00)   /* circular enqueue not supp. */
++
+ /* dma buffer */
+ 
+-struct s3c2410_dma_client {
+-	char                *name;
+-};
++struct s3c2410_dma_buf;
+ 
+-/* s3c2410_dma_buf_s
++/* s3c2410_dma_buf
+  *
+  * internally used buffer structure to describe a queued or running
+  * buffer.
+ */
+ 
+-struct s3c2410_dma_buf;
+ struct s3c2410_dma_buf {
+ 	struct s3c2410_dma_buf	*next;
+ 	int			 magic;		/* magic */
+@@ -161,20 +133,6 @@
+ 
+ /* [1] is this updated for both recv/send modes? */
+ 
+-struct s3c2410_dma_chan;
+-
+-/* s3c2410_dma_cbfn_t
+- *
+- * buffer callback routine type
+-*/
+-
+-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+-				   void *buf, int size,
+-				   enum s3c2410_dma_buffresult result);
+-
+-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+-				   enum s3c2410_chan_op );
+-
+ struct s3c2410_dma_stats {
+ 	unsigned long		loads;
+ 	unsigned long		timeout_longest;
+@@ -206,10 +164,10 @@
+ 
+ 	/* channel configuration */
+ 	enum s3c2410_dmasrc	 source;
++	enum dma_ch		 req_ch;
+ 	unsigned long		 dev_addr;
+ 	unsigned long		 load_timeout;
+ 	unsigned int		 flags;		/* channel flags */
+-	unsigned int		 hw_cfg;	/* last hw config */
+ 
+ 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
+ 
+@@ -236,213 +194,12 @@
+ 	struct sys_device	dev;
+ };
+ 
+-/* the currently allocated channel information */
+-extern struct s3c2410_dma_chan s3c2410_chans[];
+-
+-/* note, we don't really use dma_device_t at the moment */
+ typedef unsigned long dma_device_t;
+ 
+-/* functions --------------------------------------------------------------- */
+-
+-/* s3c2410_dma_request
+- *
+- * request a dma channel exclusivley
+-*/
+-
+-extern int s3c2410_dma_request(unsigned int channel,
+-			       struct s3c2410_dma_client *, void *dev);
+-
+-
+-/* s3c2410_dma_ctrl
+- *
+- * change the state of the dma channel
+-*/
+-
+-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+-
+-/* s3c2410_dma_setflags
+- *
+- * set the channel's flags to a given state
+-*/
+-
+-extern int s3c2410_dma_setflags(unsigned int channel,
+-				unsigned int flags);
+-
+-/* s3c2410_dma_free
+- *
+- * free the dma channel (will also abort any outstanding operations)
+-*/
+-
+-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+-
+-/* s3c2410_dma_enqueue
+- *
+- * place the given buffer onto the queue of operations for the channel.
+- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+- * drained before the buffer is given to the DMA system.
+-*/
+-
+-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+-			       dma_addr_t data, int size);
+-
+-/* s3c2410_dma_config
+- *
+- * configure the dma channel
+-*/
+-
+-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
+-
+-/* s3c2410_dma_devconfig
+- *
+- * configure the device we're talking to
+-*/
+-
+-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+-				 int hwcfg, unsigned long devaddr);
+-
+-/* s3c2410_dma_getposition
+- *
+- * get the position that the dma transfer is currently at
+-*/
+-
+-extern int s3c2410_dma_getposition(unsigned int channel,
+-				   dma_addr_t *src, dma_addr_t *dest);
+-
+-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+-
+-/* DMA Register definitions */
+-
+-#define S3C2410_DMA_DISRC       (0x00)
+-#define S3C2410_DMA_DISRCC      (0x04)
+-#define S3C2410_DMA_DIDST       (0x08)
+-#define S3C2410_DMA_DIDSTC      (0x0C)
+-#define S3C2410_DMA_DCON        (0x10)
+-#define S3C2410_DMA_DSTAT       (0x14)
+-#define S3C2410_DMA_DCSRC       (0x18)
+-#define S3C2410_DMA_DCDST       (0x1C)
+-#define S3C2410_DMA_DMASKTRIG   (0x20)
+-#define S3C2412_DMA_DMAREQSEL	(0x24)
+-#define S3C2443_DMA_DMAREQSEL	(0x24)
+-
+-#define S3C2410_DISRCC_INC	(1<<0)
+-#define S3C2410_DISRCC_APB	(1<<1)
+-
+-#define S3C2410_DMASKTRIG_STOP   (1<<2)
+-#define S3C2410_DMASKTRIG_ON     (1<<1)
+-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+-
+-#define S3C2410_DCON_DEMAND     (0<<31)
+-#define S3C2410_DCON_HANDSHAKE  (1<<31)
+-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+-
+-#define S3C2410_DCON_INTREQ     (1<<29)
+-
+-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+-#define S3C2410_DCON_CH0_UART0	(1<<24)
+-#define S3C2410_DCON_CH0_SDI	(2<<24)
+-#define S3C2410_DCON_CH0_TIMER	(3<<24)
+-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+-
+-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+-#define S3C2410_DCON_CH1_UART1	(1<<24)
+-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+-#define S3C2410_DCON_CH1_SPI	(3<<24)
+-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+-
+-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+-#define S3C2410_DCON_CH2_SDI	(2<<24)
+-#define S3C2410_DCON_CH2_TIMER	(3<<24)
+-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+-
+-#define S3C2410_DCON_CH3_UART2	(0<<24)
+-#define S3C2410_DCON_CH3_SDI	(1<<24)
+-#define S3C2410_DCON_CH3_SPI	(2<<24)
+-#define S3C2410_DCON_CH3_TIMER	(3<<24)
+-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+-
+-#define S3C2410_DCON_SRCSHIFT   (24)
+-#define S3C2410_DCON_SRCMASK	(7<<24)
+-
+-#define S3C2410_DCON_BYTE       (0<<20)
+-#define S3C2410_DCON_HALFWORD   (1<<20)
+-#define S3C2410_DCON_WORD       (2<<20)
+-
+-#define S3C2410_DCON_AUTORELOAD (0<<22)
+-#define S3C2410_DCON_NORELOAD   (1<<22)
+-#define S3C2410_DCON_HWTRIG     (1<<23)
+-
+-#ifdef CONFIG_CPU_S3C2440
+-#define S3C2440_DIDSTC_CHKINT	(1<<2)
+-
+-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+-
+-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+-#define S3C2440_DCON_CH1_SDI	(6<<24)
+-
+-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+-#define S3C2440_DCON_CH2_MICIN	(6<<24)
+-
+-#define S3C2440_DCON_CH3_MICIN	(5<<24)
+-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+-#endif
+-
+-#ifdef CONFIG_CPU_S3C2412
+-
+-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+-
+-#define S3C2412_DMAREQSEL_HW		(1)
+-
+-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+-
+-#endif
+-
+-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+-
+-#define S3C2443_DMAREQSEL_HW		(1)
+ 
+-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
++static int s3c_dma_has_circular(void)
++{
++	return 0;
++}
+ 
+ #endif /* __ASM_ARCH_DMA_H */
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/Kconfig	2009-05-18 19:08:29.000000000 +0200
+@@ -11,6 +11,7 @@
+ 	select S3C2410_CLOCK
+ 	select S3C2410_GPIO
+ 	select S3C2410_PM if PM
++	select S3C2440_DMA if S3C2410_DMA
+ 	select CPU_S3C244X
+ 	select CPU_LLSERIAL_S3C2440
+ 	help
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/dma.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/dma.c	2009-05-18 19:08:29.000000000 +0200
+@@ -0,0 +1,86 @@
++/* linux/arch/arm/plat-s3c/dma.c
++ *
++ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *	http://armlinux.simtec.co.uk/
++ *
++ * S3C DMA core
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++struct s3c2410_dma_buf;
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++#include <plat/dma-plat.h>
++
++/* dma channel state information */
++struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
++struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
++
++/* s3c_dma_lookup_channel
++ *
++ * change the dma channel number given into a real dma channel id
++*/
++
++struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
++{
++	if (channel & DMACH_LOW_LEVEL)
++		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
++	else
++		return s3c_dma_chan_map[channel];
++}
++
++/* do we need to protect the settings of the fields from
++ * irq?
++*/
++
++int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
++{
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++	if (chan == NULL)
++		return -EINVAL;
++
++	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
++
++	chan->op_fn = rtn;
++
++	return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_set_opfn);
++
++int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
++{
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++	if (chan == NULL)
++		return -EINVAL;
++
++	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
++
++	chan->callback_fn = rtn;
++
++	return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
++
++int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
++{
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++	if (chan == NULL)
++		return -EINVAL;
++
++	chan->flags = flags;
++	return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_setflags);
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/dma-core.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/dma-core.h	2009-05-18 19:08:29.000000000 +0200
+@@ -0,0 +1,22 @@
++/* arch/arm/plat-s3c/include/plat/dma.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *	http://armlinux.simtec.co.uk/
++ *
++ * Samsung S3C DMA core support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
++
++extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
++
++/* the currently allocated channel information */
++extern struct s3c2410_dma_chan s3c2410_chans[];
++
++
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/dma.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/dma.h	2009-05-18 19:08:29.000000000 +0200
+@@ -0,0 +1,128 @@
++/* arch/arm/plat-s3c/include/plat/dma.h
++ *
++ * Copyright (C) 2003,2004,2006 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++enum s3c2410_dma_buffresult {
++	S3C2410_RES_OK,
++	S3C2410_RES_ERR,
++	S3C2410_RES_ABORT
++};
++
++enum s3c2410_dmasrc {
++	S3C2410_DMASRC_HW,		/* source is memory */
++	S3C2410_DMASRC_MEM		/* source is hardware */
++};
++
++/* enum s3c2410_chan_op
++ *
++ * operation codes passed to the DMA code by the user, and also used
++ * to inform the current channel owner of any changes to the system state
++*/
++
++enum s3c2410_chan_op {
++	S3C2410_DMAOP_START,
++	S3C2410_DMAOP_STOP,
++	S3C2410_DMAOP_PAUSE,
++	S3C2410_DMAOP_RESUME,
++	S3C2410_DMAOP_FLUSH,
++	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
++	S3C2410_DMAOP_STARTED,		/* indicate channel started */
++};
++
++struct s3c2410_dma_client {
++	char                *name;
++};
++
++struct s3c2410_dma_chan;
++
++/* s3c2410_dma_cbfn_t
++ *
++ * buffer callback routine type
++*/
++
++typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
++				   void *buf, int size,
++				   enum s3c2410_dma_buffresult result);
++
++typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
++				   enum s3c2410_chan_op );
++
++
++
++/* s3c2410_dma_request
++ *
++ * request a dma channel exclusivley
++*/
++
++extern int s3c2410_dma_request(unsigned int channel,
++			       struct s3c2410_dma_client *, void *dev);
++
++
++/* s3c2410_dma_ctrl
++ *
++ * change the state of the dma channel
++*/
++
++extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
++
++/* s3c2410_dma_setflags
++ *
++ * set the channel's flags to a given state
++*/
++
++extern int s3c2410_dma_setflags(unsigned int channel,
++				unsigned int flags);
++
++/* s3c2410_dma_free
++ *
++ * free the dma channel (will also abort any outstanding operations)
++*/
++
++extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
++
++/* s3c2410_dma_enqueue
++ *
++ * place the given buffer onto the queue of operations for the channel.
++ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
++ * drained before the buffer is given to the DMA system.
++*/
++
++extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
++			       dma_addr_t data, int size);
++
++
++/* s3c2410_dma_config
++ *
++ * configure the dma channel
++*/
++
++extern int s3c2410_dma_config(unsigned int channel, int xferunit);
++
++/* s3c2410_dma_devconfig
++ *
++ * configure the device we're talking to
++*/
++
++extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
++				 unsigned long devaddr);
++
++/* s3c2410_dma_getposition
++ *
++ * get the position that the dma transfer is currently at
++*/
++
++extern int s3c2410_dma_getposition(unsigned int channel,
++				   dma_addr_t *src, dma_addr_t *dest);
++
++extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
++extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
++
++
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig	2009-05-18 19:08:29.000000000 +0200
+@@ -150,6 +150,13 @@
+ 	  Internal configuration to enable S3C64XX style GPIO configuration
+ 	  functions.
+ 
++# DMA
++
++config S3C_DMA
++	bool
++	help
++	  Internal configuration for S3C DMA core
++
+ # device definitions to compile in
+ 
+ config S3C_DEV_HSMMC
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Makefile	2009-05-18 19:07:48.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile	2009-05-18 19:08:29.000000000 +0200
+@@ -18,6 +18,10 @@
+ obj-y				+= gpio.o
+ obj-y				+= gpio-config.o
+ 
++# DMA support
++
++obj-$(CONFIG_S3C_DMA)		+= dma.o
++
+ # PM support
+ 
+ obj-$(CONFIG_PM)		+= pm.o
+@@ -31,3 +35,5 @@
+ obj-y				+= dev-i2c0.o
+ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+ obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
++obj-$(CONFIG_S3C_DMA)		+= dma.o
++
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/dma.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/dma.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/dma.c	2009-05-18 19:08:29.000000000 +0200
+@@ -31,10 +31,11 @@
+ #include <asm/irq.h>
+ #include <mach/hardware.h>
+ #include <mach/dma.h>
+-
+ #include <mach/map.h>
+ 
+-#include <plat/dma.h>
++#include <plat/dma-core.h>
++#include <plat/regs-dma.h>
++#include <plat/dma-plat.h>
+ 
+ /* io map for dma */
+ static void __iomem *dma_base;
+@@ -44,8 +45,6 @@
+ 
+ static struct s3c24xx_dma_selection dma_sel;
+ 
+-/* dma channel state information */
+-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+ 
+ /* debugging functions */
+ 
+@@ -135,21 +134,6 @@
+ #define dbg_showchan(chan) do { } while(0)
+ #endif /* CONFIG_S3C2410_DMA_DEBUG */
+ 
+-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+-
+-/* lookup_dma_channel
+- *
+- * change the dma channel number given into a real dma channel id
+-*/
+-
+-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+-{
+-	if (channel & DMACH_LOW_LEVEL)
+-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+-	else
+-		return dma_chan_map[channel];
+-}
+-
+ /* s3c2410_dma_stats_timeout
+  *
+  * Update DMA stats from timeout info
+@@ -214,8 +198,6 @@
+ 	return 0;
+ }
+ 
+-
+-
+ /* s3c2410_dma_loadbuffer
+  *
+  * load a buffer, and update the channel state
+@@ -453,7 +435,7 @@
+ int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ 			dma_addr_t data, int size)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ 	struct s3c2410_dma_buf *buf;
+ 	unsigned long flags;
+ 
+@@ -804,7 +786,7 @@
+ 
+ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ 	unsigned long flags;
+ 
+ 	if (chan == NULL)
+@@ -836,7 +818,7 @@
+ 	chan->irq_claimed = 0;
+ 
+ 	if (!(channel & DMACH_LOW_LEVEL))
+-		dma_chan_map[channel] = NULL;
++		s3c_dma_chan_map[channel] = NULL;
+ 
+ 	local_irq_restore(flags);
+ 
+@@ -995,7 +977,7 @@
+ int
+ s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ 
+ 	if (chan == NULL)
+ 		return -EINVAL;
+@@ -1038,14 +1020,13 @@
+ /* s3c2410_dma_config
+  *
+  * xfersize:     size of unit in bytes (1,2,4)
+- * dcon:         base value of the DCONx register
+ */
+ 
+ int s3c2410_dma_config(unsigned int channel,
+-		       int xferunit,
+-		       int dcon)
++		       int xferunit)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++	unsigned int dcon;
+ 
+ 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+ 		 __func__, channel, xferunit, dcon);
+@@ -1055,10 +1036,33 @@
+ 
+ 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
+ 
+-	dcon |= chan->dcon & dma_sel.dcon_mask;
++	dcon = chan->dcon & dma_sel.dcon_mask;
+ 
+ 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+ 
++	switch (chan->req_ch) {
++	case DMACH_I2S_IN:
++	case DMACH_I2S_OUT:
++	case DMACH_PCM_IN:
++	case DMACH_PCM_OUT:
++	case DMACH_MIC_IN:
++	default:
++		dcon |= S3C2410_DCON_HANDSHAKE;
++		dcon |= S3C2410_DCON_SYNC_PCLK;
++		break;
++
++	case DMACH_SDI:
++		/* note, ensure if need HANDSHAKE or not */
++		dcon |= S3C2410_DCON_SYNC_PCLK;
++		break;		
++
++	case DMACH_XD0:
++	case DMACH_XD1:
++		dcon |= S3C2410_DCON_HANDSHAKE;
++		dcon |= S3C2410_DCON_SYNC_HCLK;
++		break;
++	}
++
+ 	switch (xferunit) {
+ 	case 1:
+ 		dcon |= S3C2410_DCON_BYTE;
+@@ -1089,10 +1093,10 @@
+ }
+ 
+ EXPORT_SYMBOL(s3c2410_dma_config);
+-
++#if 0 /* moved to plat-s3c? */
+ int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ 
+ 	if (chan == NULL)
+ 		return -EINVAL;
+@@ -1105,43 +1109,7 @@
+ }
+ 
+ EXPORT_SYMBOL(s3c2410_dma_setflags);
+-
+-
+-/* do we need to protect the settings of the fields from
+- * irq?
+-*/
+-
+-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+-{
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+-
+-	if (chan == NULL)
+-		return -EINVAL;
+-
+-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+-
+-	chan->op_fn = rtn;
+-
+-	return 0;
+-}
+-
+-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+-
+-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+-{
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+-
+-	if (chan == NULL)
+-		return -EINVAL;
+-
+-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+-
+-	chan->callback_fn = rtn;
+-
+-	return 0;
+-}
+-
+-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
++#endif
+ 
+ /* s3c2410_dma_devconfig
+  *
+@@ -1150,29 +1118,38 @@
+  * source:    S3C2410_DMASRC_HW: source is hardware
+  *            S3C2410_DMASRC_MEM: source is memory
+  *
+- * hwcfg:     the value for xxxSTCn register,
+- *            bit 0: 0=increment pointer, 1=leave pointer
+- *            bit 1: 0=source is AHB, 1=source is APB
+- *
+  * devaddr:   physical address of the source
+ */
+ 
+ int s3c2410_dma_devconfig(int channel,
+ 			  enum s3c2410_dmasrc source,
+-			  int hwcfg,
+ 			  unsigned long devaddr)
+ {
+-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++	unsigned int hwcfg;
+ 
+ 	if (chan == NULL)
+ 		return -EINVAL;
+ 
+-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+-		 __func__, (int)source, hwcfg, devaddr);
++	pr_debug("%s: source=%d, devaddr=%08lx\n",
++		 __func__, (int)source, devaddr);
+ 
+ 	chan->source = source;
+ 	chan->dev_addr = devaddr;
+-	chan->hw_cfg = hwcfg;
++
++	switch (chan->req_ch) {
++	case DMACH_XD0:
++	case DMACH_XD1:
++		hwcfg = 0; /* AHB */
++		break;
++
++	default:
++		hwcfg = S3C2410_DISRCC_APB;
++	}
++
++	/* always assume our peripheral desintation is a fixed
++	 * address in memory. */
++	 hwcfg |= S3C2410_DISRCC_INC;
+ 
+ 	switch (source) {
+ 	case S3C2410_DMASRC_HW:
+@@ -1219,7 +1196,7 @@
+ 
+ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
+ {
+- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++ 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ 
+ 	if (chan == NULL)
+ 		return -EINVAL;
+@@ -1278,8 +1255,8 @@
+ 
+ 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+ 
+-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
+-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
++	s3c2410_dma_config(no, cp->xfer_unit);
++	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
+ 
+ 	/* re-select the dma source for this channel */
+ 
+@@ -1476,7 +1453,8 @@
+  found:
+ 	dmach = &s3c2410_chans[ch];
+ 	dmach->map = ch_map;
+-	dma_chan_map[channel] = dmach;
++	dmach->req_ch = channel;
++	s3c_dma_chan_map[channel] = dmach;
+ 
+ 	/* select the channel */
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/dma.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/dma.h	2009-05-16 06:12:57.000000000 +0200
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,82 +0,0 @@
+-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+- *
+- * Copyright (C) 2006 Simtec Electronics
+- *	Ben Dooks <ben@simtec.co.uk>
+- *
+- * Samsung S3C24XX DMA support
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+-*/
+-
+-extern struct sysdev_class dma_sysclass;
+-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+-
+-#define DMA_CH_VALID		(1<<31)
+-#define DMA_CH_NEVER		(1<<30)
+-
+-struct s3c24xx_dma_addr {
+-	unsigned long		from;
+-	unsigned long		to;
+-};
+-
+-/* struct s3c24xx_dma_map
+- *
+- * this holds the mapping information for the channel selected
+- * to be connected to the specified device
+-*/
+-
+-struct s3c24xx_dma_map {
+-	const char		*name;
+-	struct s3c24xx_dma_addr  hw_addr;
+-
+-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+-};
+-
+-struct s3c24xx_dma_selection {
+-	struct s3c24xx_dma_map	*map;
+-	unsigned long		 map_size;
+-	unsigned long		 dcon_mask;
+-
+-	void	(*select)(struct s3c2410_dma_chan *chan,
+-			  struct s3c24xx_dma_map *map);
+-
+-	void	(*direction)(struct s3c2410_dma_chan *chan,
+-			     struct s3c24xx_dma_map *map,
+-			     enum s3c2410_dmasrc dir);
+-};
+-
+-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+-
+-/* struct s3c24xx_dma_order_ch
+- *
+- * channel map for one of the `enum dma_ch` dma channels. the list
+- * entry contains a set of low-level channel numbers, orred with
+- * DMA_CH_VALID, which are checked in the order in the array.
+-*/
+-
+-struct s3c24xx_dma_order_ch {
+-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+-	unsigned int	flags;				/* flags */
+-};
+-
+-/* struct s3c24xx_dma_order
+- *
+- * information provided by either the core or the board to give the
+- * dma system a hint on how to allocate channels
+-*/
+-
+-struct s3c24xx_dma_order {
+-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+-};
+-
+-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+-
+-/* DMA init code, called from the cpu support code */
+-
+-extern int s3c2410_dma_init(void);
+-
+-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+-			    unsigned int stride);
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/dma-plat.h	2009-05-18 19:08:29.000000000 +0200
+@@ -0,0 +1,84 @@
++/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
++ *
++ * Copyright (C) 2006 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C24XX DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <plat/dma-core.h>
++
++extern struct sysdev_class dma_sysclass;
++extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
++
++#define DMA_CH_VALID		(1<<31)
++#define DMA_CH_NEVER		(1<<30)
++
++struct s3c24xx_dma_addr {
++	unsigned long		from;
++	unsigned long		to;
++};
++
++/* struct s3c24xx_dma_map
++ *
++ * this holds the mapping information for the channel selected
++ * to be connected to the specified device
++*/
++
++struct s3c24xx_dma_map {
++	const char		*name;
++	struct s3c24xx_dma_addr  hw_addr;
++
++	unsigned long		 channels[S3C_DMA_CHANNELS];
++	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
++};
++
++struct s3c24xx_dma_selection {
++	struct s3c24xx_dma_map	*map;
++	unsigned long		 map_size;
++	unsigned long		 dcon_mask;
++
++	void	(*select)(struct s3c2410_dma_chan *chan,
++			  struct s3c24xx_dma_map *map);
++
++	void	(*direction)(struct s3c2410_dma_chan *chan,
++			     struct s3c24xx_dma_map *map,
++			     enum s3c2410_dmasrc dir);
++};
++
++extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
++
++/* struct s3c24xx_dma_order_ch
++ *
++ * channel map for one of the `enum dma_ch` dma channels. the list
++ * entry contains a set of low-level channel numbers, orred with
++ * DMA_CH_VALID, which are checked in the order in the array.
++*/
++
++struct s3c24xx_dma_order_ch {
++	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
++	unsigned int	flags;				/* flags */
++};
++
++/* struct s3c24xx_dma_order
++ *
++ * information provided by either the core or the board to give the
++ * dma system a hint on how to allocate channels
++*/
++
++struct s3c24xx_dma_order {
++	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
++};
++
++extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
++
++/* DMA init code, called from the cpu support code */
++
++extern int s3c2410_dma_init(void);
++
++extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
++			    unsigned int stride);
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/regs-dma.h	2009-05-18 19:08:29.000000000 +0200
+@@ -0,0 +1,145 @@
++/* arch/arm/mach-s3c2410/include/mach/dma.h
++ *
++ * Copyright (C) 2003,2004,2006 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C24XX DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++/* DMA Register definitions */
++
++#define S3C2410_DMA_DISRC		(0x00)
++#define S3C2410_DMA_DISRCC		(0x04)
++#define S3C2410_DMA_DIDST		(0x08)
++#define S3C2410_DMA_DIDSTC		(0x0C)
++#define S3C2410_DMA_DCON		(0x10)
++#define S3C2410_DMA_DSTAT		(0x14)
++#define S3C2410_DMA_DCSRC		(0x18)
++#define S3C2410_DMA_DCDST		(0x1C)
++#define S3C2410_DMA_DMASKTRIG		(0x20)
++#define S3C2412_DMA_DMAREQSEL		(0x24)
++#define S3C2443_DMA_DMAREQSEL		(0x24)
++
++#define S3C2410_DISRCC_INC		(1<<0)
++#define S3C2410_DISRCC_APB		(1<<1)
++
++#define S3C2410_DMASKTRIG_STOP		(1<<2)
++#define S3C2410_DMASKTRIG_ON		(1<<1)
++#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
++
++#define S3C2410_DCON_DEMAND		(0<<31)
++#define S3C2410_DCON_HANDSHAKE		(1<<31)
++#define S3C2410_DCON_SYNC_PCLK		(0<<30)
++#define S3C2410_DCON_SYNC_HCLK		(1<<30)
++
++#define S3C2410_DCON_INTREQ		(1<<29)
++
++#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
++#define S3C2410_DCON_CH0_UART0		(1<<24)
++#define S3C2410_DCON_CH0_SDI		(2<<24)
++#define S3C2410_DCON_CH0_TIMER		(3<<24)
++#define S3C2410_DCON_CH0_USBEP1		(4<<24)
++
++#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
++#define S3C2410_DCON_CH1_UART1		(1<<24)
++#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
++#define S3C2410_DCON_CH1_SPI		(3<<24)
++#define S3C2410_DCON_CH1_USBEP2		(4<<24)
++
++#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
++#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
++#define S3C2410_DCON_CH2_SDI		(2<<24)
++#define S3C2410_DCON_CH2_TIMER		(3<<24)
++#define S3C2410_DCON_CH2_USBEP3		(4<<24)
++
++#define S3C2410_DCON_CH3_UART2		(0<<24)
++#define S3C2410_DCON_CH3_SDI		(1<<24)
++#define S3C2410_DCON_CH3_SPI		(2<<24)
++#define S3C2410_DCON_CH3_TIMER		(3<<24)
++#define S3C2410_DCON_CH3_USBEP4		(4<<24)
++
++#define S3C2410_DCON_SRCSHIFT		(24)
++#define S3C2410_DCON_SRCMASK		(7<<24)
++
++#define S3C2410_DCON_BYTE		(0<<20)
++#define S3C2410_DCON_HALFWORD		(1<<20)
++#define S3C2410_DCON_WORD		(2<<20)
++
++#define S3C2410_DCON_AUTORELOAD		(0<<22)
++#define S3C2410_DCON_NORELOAD		(1<<22)
++#define S3C2410_DCON_HWTRIG		(1<<23)
++
++#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
++#define S3C2440_DIDSTC_CHKINT		(1<<2)
++
++#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
++#define S3C2440_DCON_CH0_PCMIN		(6<<24)
++
++#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
++#define S3C2440_DCON_CH1_SDI		(6<<24)
++
++#define S3C2440_DCON_CH2_PCMIN		(5<<24)
++#define S3C2440_DCON_CH2_MICIN		(6<<24)
++
++#define S3C2440_DCON_CH3_MICIN		(5<<24)
++#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
++#endif
++
++#ifdef CONFIG_CPU_S3C2412
++
++#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
++
++#define S3C2412_DMAREQSEL_HW		(1)
++
++#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
++#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
++#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
++#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
++#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
++#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
++#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
++#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
++#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
++#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
++#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
++#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
++#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
++#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
++#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
++#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
++#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
++#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
++#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
++#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
++
++#endif
++
++#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
++
++#define S3C2443_DMAREQSEL_HW		(1)
++
++#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
++#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
++#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
++#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
++#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
++#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
++#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
++#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
++#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
++#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
++#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
++#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
++#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
++#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
++#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
++#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
++#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
++#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
++#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
++#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
++#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/Kconfig	2009-05-18 19:08:29.000000000 +0200
+@@ -71,6 +71,7 @@
+ config S3C2410_DMA
+ 	bool "S3C2410 DMA support"
+ 	depends on ARCH_S3C2410
++	select S3C_DMA
+ 	help
+ 	  S3C2410 DMA support. This is needed for drivers like sound which
+ 	  use the S3C2410's DMA system to move data to and from the
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/dma.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/dma.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/dma.c	2009-05-18 19:08:29.000000000 +0200
+@@ -17,14 +17,16 @@
+ #include <linux/sysdev.h>
+ #include <linux/serial_core.h>
+ 
++#include <mach/map.h>
+ #include <mach/dma.h>
+ 
+ #include <plat/cpu.h>
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ 
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2440/dma.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2440/dma.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2440/dma.c	2009-05-18 19:08:29.000000000 +0200
+@@ -17,14 +17,16 @@
+ #include <linux/sysdev.h>
+ #include <linux/serial_core.h>
+ 
++#include <mach/map.h>
+ #include <mach/dma.h>
+ 
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ #include <plat/cpu.h>
+ 
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
diff --git a/target/linux/s3c24xx/patches-2.6.30/011-s3c-pwm.patch b/target/linux/s3c24xx/patches-2.6.30/011-s3c-pwm.patch
new file mode 100644
index 0000000..fe9a7c8
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/011-s3c-pwm.patch
@@ -0,0 +1,812 @@
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pwm.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pwm.h	2009-05-18 19:08:30.000000000 +0200
+@@ -0,0 +1,45 @@
++#ifndef __S3C2410_PWM_H
++#define __S3C2410_PWM_H
++
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++
++#include <mach/io.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <plat/regs-timer.h>
++
++enum pwm_timer {
++	PWM0,
++	PWM1,
++	PWM2,
++	PWM3,
++	PWM4
++};
++
++struct s3c2410_pwm {
++	enum pwm_timer timerid;
++	struct clk *pclk;
++	unsigned long pclk_rate;
++	unsigned long prescaler;
++	unsigned long divider;
++	unsigned long counter;
++	unsigned long comparer;
++};
++
++struct s3c24xx_pwm_platform_data{
++        /* callback to attach platform children (to enforce suspend / resume
++         * ordering */
++        void (*attach_child_devices)(struct device *parent_device);
++};
++
++int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_dumpregs(void);
++
++#endif /* __S3C2410_PWM_H */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Kconfig	2009-05-18 19:08:29.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig	2009-05-18 19:08:30.000000000 +0200
+@@ -157,6 +157,11 @@
+ 	help
+ 	  Internal configuration for S3C DMA core
+ 
++config S3C_PWM
++	bool
++	help
++	  PWM timer code for the S3C2410, and similar processors
++
+ # device definitions to compile in
+ 
+ config S3C_DEV_HSMMC
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Makefile	2009-05-18 19:08:29.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile	2009-05-18 19:08:30.000000000 +0200
+@@ -35,5 +35,6 @@
+ obj-y				+= dev-i2c0.o
+ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+ obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
++obj-$(CONFIG_S3C_PWM)		+= pwm.o
+ obj-$(CONFIG_S3C_DMA)		+= dma.o
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/pwm.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/pwm.c	2009-05-18 19:08:30.000000000 +0200
+@@ -0,0 +1,288 @@
++/*
++ * arch/arm/plat-s3c/pwm.c
++ *
++ * Copyright (c) by Javi Roman <javiroman@kernel-labs.org>
++ * 		 for the Openmoko Project.
++ *
++ *     S3C2410A SoC PWM support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <mach/hardware.h>
++#include <plat/regs-timer.h>
++#include <plat/pwm.h>
++#include <asm/io.h>
++
++#ifdef CONFIG_PM
++	static unsigned long standby_reg_tcon;
++	static unsigned long standby_reg_tcfg0;
++	static unsigned long standby_reg_tcfg1;
++#endif
++
++int s3c2410_pwm_disable(struct s3c2410_pwm *pwm)
++{
++	unsigned long tcon;
++
++	/* stop timer */
++	tcon = __raw_readl(S3C2410_TCON);
++	tcon &= 0xffffff00;
++	__raw_writel(tcon, S3C2410_TCON);
++
++	clk_disable(pwm->pclk);
++	clk_put(pwm->pclk);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_disable);
++
++int s3c2410_pwm_init(struct s3c2410_pwm *pwm)
++{
++	pwm->pclk = clk_get(NULL, "timers");
++	if (IS_ERR(pwm->pclk))
++		return PTR_ERR(pwm->pclk);
++
++	clk_enable(pwm->pclk);
++	pwm->pclk_rate = clk_get_rate(pwm->pclk);
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_init);
++
++int s3c2410_pwm_enable(struct s3c2410_pwm *pwm)
++{
++	unsigned long tcfg0, tcfg1, tcnt, tcmp;
++
++	/* control registers bits */
++	tcfg1 = __raw_readl(S3C2410_TCFG1);
++	tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++	/* divider & scaler slection */
++	switch (pwm->timerid) {
++	case PWM0:
++		tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK;
++		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++		break;
++	case PWM1:
++		tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK;
++		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++		break;
++	case PWM2:
++		tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK;
++		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++		break;
++	case PWM3:
++		tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK;
++		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++		break;
++	case PWM4:
++		/* timer four is not capable of doing PWM */
++		break;
++	default:
++		clk_disable(pwm->pclk);
++		clk_put(pwm->pclk);
++		return -1;
++	}
++
++	/* divider & scaler values */
++	tcfg1 |= pwm->divider;
++	__raw_writel(tcfg1, S3C2410_TCFG1);
++
++	switch (pwm->timerid) {
++	case PWM0:
++	case PWM1:
++		tcfg0 |= pwm->prescaler;
++		__raw_writel(tcfg0, S3C2410_TCFG0);
++		break;
++	default:
++		if ((tcfg0 | pwm->prescaler) != tcfg0) {
++			printk(KERN_WARNING "not changing prescaler of PWM %u,"
++			       " since it's shared with timer4 (clock tick)\n",
++			       pwm->timerid);
++		}
++		break;
++	}
++
++	/* timer count and compare buffer initial values */
++	tcnt = pwm->counter;
++	tcmp = pwm->comparer;
++
++	__raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid));
++	__raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid));
++
++	/* ensure timer is stopped */
++	s3c2410_pwm_stop(pwm);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_enable);
++
++int s3c2410_pwm_start(struct s3c2410_pwm *pwm)
++{
++	unsigned long tcon;
++
++	tcon = __raw_readl(S3C2410_TCON);
++
++	switch (pwm->timerid) {
++	case PWM0:
++		tcon |= S3C2410_TCON_T0START;
++		tcon &= ~S3C2410_TCON_T0MANUALUPD;
++		break;
++	case PWM1:
++		tcon |= S3C2410_TCON_T1START;
++		tcon &= ~S3C2410_TCON_T1MANUALUPD;
++		break;
++	case PWM2:
++		tcon |= S3C2410_TCON_T2START;
++		tcon &= ~S3C2410_TCON_T2MANUALUPD;
++		break;
++	case PWM3:
++		tcon |= S3C2410_TCON_T3START;
++		tcon &= ~S3C2410_TCON_T3MANUALUPD;
++		break;
++	case PWM4:
++		/* timer four is not capable of doing PWM */
++	default:
++		return -ENODEV;
++	}
++
++	__raw_writel(tcon, S3C2410_TCON);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_start);
++
++int s3c2410_pwm_stop(struct s3c2410_pwm *pwm)
++{
++	unsigned long tcon;
++
++	tcon = __raw_readl(S3C2410_TCON);
++
++	switch (pwm->timerid) {
++	case PWM0:
++		tcon &= ~0x00000000;
++		tcon |= S3C2410_TCON_T0RELOAD;
++		tcon |= S3C2410_TCON_T0MANUALUPD;
++		break;
++	case PWM1:
++		tcon &= ~0x00000080;
++		tcon |= S3C2410_TCON_T1RELOAD;
++		tcon |= S3C2410_TCON_T1MANUALUPD;
++		break;
++	case PWM2:
++		tcon &= ~0x00000800;
++		tcon |= S3C2410_TCON_T2RELOAD;
++		tcon |= S3C2410_TCON_T2MANUALUPD;
++		break;
++	case PWM3:
++		tcon &= ~0x00008000;
++		tcon |= S3C2410_TCON_T3RELOAD;
++		tcon |= S3C2410_TCON_T3MANUALUPD;
++		break;
++	case PWM4:
++		/* timer four is not capable of doing PWM */
++	default:
++		return -ENODEV;
++	}
++
++	__raw_writel(tcon, S3C2410_TCON);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_stop);
++
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm)
++{
++	__raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid));
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle);
++
++int s3c2410_pwm_dumpregs(void)
++{
++	printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n",
++			(unsigned long)	__raw_readl(S3C2410_TCON),
++			(unsigned long)	__raw_readl(S3C2410_TCFG0),
++			(unsigned long)	__raw_readl(S3C2410_TCFG1));
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs);
++
++static int __init s3c24xx_pwm_probe(struct platform_device *pdev)
++{
++	struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data;
++
++	dev_info(&pdev->dev, "s3c24xx_pwm is registered \n");
++
++	/* if platform was interested, give him a chance to register
++	 * platform devices that switch power with us as the parent
++	 * at registration time -- ensures suspend / resume ordering
++	 */
++	if (pdata)
++		if (pdata->attach_child_devices)
++			(pdata->attach_child_devices)(&pdev->dev);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	/* PWM config should be kept in suspending */
++	standby_reg_tcon = __raw_readl(S3C2410_TCON);
++	standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0);
++	standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++	return 0;
++}
++
++static int s3c24xx_pwm_resume(struct platform_device *pdev)
++{
++	__raw_writel(standby_reg_tcon, S3C2410_TCON);
++	__raw_writel(standby_reg_tcfg0, S3C2410_TCFG0);
++	__raw_writel(standby_reg_tcfg1, S3C2410_TCFG1);
++
++	return 0;
++}
++#else
++#define s3c24xx_pwm_suspend	NULL
++#define s3c24xx_pwm_resume	NULL
++#endif
++
++static struct platform_driver s3c24xx_pwm_driver = {
++	.driver = {
++		.name	= "s3c24xx_pwm",
++		.owner	= THIS_MODULE,
++	},
++	.probe	 = s3c24xx_pwm_probe,
++	.suspend = s3c24xx_pwm_suspend,
++	.resume	 = s3c24xx_pwm_resume,
++};
++
++static int __init s3c24xx_pwm_init(void)
++{
++	return platform_driver_register(&s3c24xx_pwm_driver);
++}
++
++static void __exit s3c24xx_pwm_exit(void)
++{
++}
++
++MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>");
++MODULE_LICENSE("GPL");
++
++module_init(s3c24xx_pwm_init);
++module_exit(s3c24xx_pwm_exit);
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pwm-clock.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pwm-clock.c	2009-05-18 19:08:30.000000000 +0200
+@@ -0,0 +1,437 @@
++/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
++ *
++ * Copyright (c) 2007 Simtec Electronics
++ * Copyright (c) 2007, 2008 Ben Dooks
++ *	Ben Dooks <ben-linux@fluff.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++*/
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <mach/regs-clock.h>
++#include <mach/regs-gpio.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++#include <asm/plat-s3c/regs-timer.h>
++
++/* Each of the timers 0 through 5 go through the following
++ * clock tree, with the inputs depending on the timers.
++ *
++ * pclk ---- [ prescaler 0 ] -+---> timer 0
++ *			      +---> timer 1
++ *
++ * pclk ---- [ prescaler 1 ] -+---> timer 2
++ *			      +---> timer 3
++ *			      \---> timer 4
++ *
++ * Which are fed into the timers as so:
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ *				       [mux] -> timer 0
++ * tclk 0 ------------------------------/
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ *				       [mux] -> timer 1
++ * tclk 0 ------------------------------/
++ *
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ *				       [mux] -> timer 2
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ *				       [mux] -> timer 3
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
++ *				       [mux] -> timer 4
++ * tclk 1 ------------------------------/
++ *
++ * Since the mux and the divider are tied together in the
++ * same register space, it is impossible to set the parent
++ * and the rate at the same time. To avoid this, we add an
++ * intermediate 'prescaled-and-divided' clock to select
++ * as the parent for the timer input clock called tdiv.
++ *
++ * prescaled clk --> pwm-tdiv ---\
++ *                             [ mux ] --> timer X
++ * tclk -------------------------/
++*/
++
++static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
++{
++	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++	if (clk->id == 1) {
++		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
++		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
++	} else {
++		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
++	}
++
++	return clk_get_rate(clk->parent) / (tcfg0 + 1);
++}
++
++/* TODO - add set rate calls. */
++
++static struct clk clk_timer_scaler[] = {
++	[0]	= {
++		.name		= "pwm-scaler0",
++		.id		= -1,
++		.get_rate	= clk_pwm_scaler_getrate,
++	},
++	[1]	= {
++		.name		= "pwm-scaler1",
++		.id		= -1,
++		.get_rate	= clk_pwm_scaler_getrate,
++	},
++};
++
++static struct clk clk_timer_tclk[] = {
++	[0]	= {
++		.name		= "pwm-tclk0",
++		.id		= -1,
++	},
++	[1]	= {
++		.name		= "pwm-tclk1",
++		.id		= -1,
++	},
++};
++
++struct pwm_tdiv_clk {
++	struct clk	clk;
++	unsigned int	divisor;
++};
++
++static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
++{
++	return container_of(clk, struct pwm_tdiv_clk, clk);
++}
++
++static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
++{
++	return 1 << (1 + tcfg1);
++}
++
++static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
++{
++	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++	unsigned int divisor;
++
++	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++		divisor = to_tdiv(clk)->divisor;
++	else
++		divisor = tcfg_to_divisor(tcfg1);
++
++	return clk_get_rate(clk->parent) / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
++					     unsigned long rate)
++{
++	unsigned long parent_rate;
++	unsigned long divisor;
++
++	parent_rate = clk_get_rate(clk->parent);
++	divisor = parent_rate / rate;
++
++	if (divisor <= 2)
++		divisor = 2;
++	else if (divisor <= 4)
++		divisor = 4;
++	else if (divisor <= 8)
++		divisor = 8;
++	else
++		divisor = 16;
++
++	return parent_rate / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
++{
++	unsigned long bits;
++
++	switch (divclk->divisor) {
++	case 2:
++		bits = S3C2410_TCFG1_MUX_DIV2;
++		break;
++	case 4:
++		bits = S3C2410_TCFG1_MUX_DIV4;
++		break;
++	case 8:
++		bits = S3C2410_TCFG1_MUX_DIV8;
++		break;
++	case 16:
++	default:
++		bits = S3C2410_TCFG1_MUX_DIV16;
++		break;
++	}
++
++	return bits;
++}
++
++static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
++{
++	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++	unsigned long bits = clk_pwm_tdiv_bits(divclk);
++	unsigned long flags;
++	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
++
++	local_irq_save(flags);
++
++	tcfg1 = __raw_readl(S3C2410_TCFG1);
++	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++	tcfg1 |= bits << shift;
++	__raw_writel(tcfg1, S3C2410_TCFG1);
++
++	local_irq_restore(flags);
++}
++
++static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
++{
++	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
++	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++	unsigned long parent_rate = clk_get_rate(clk->parent);
++	unsigned long divisor;
++
++	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++	rate = clk_round_rate(clk, rate);
++	divisor = parent_rate / rate;
++
++	if (divisor > 16)
++		return -EINVAL;
++
++	divclk->divisor = divisor;
++
++	/* Update the current MUX settings if we are currently
++	 * selected as the clock source for this clock. */
++
++	if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
++		clk_pwm_tdiv_update(divclk);
++
++	return 0;
++}
++
++static struct pwm_tdiv_clk clk_timer_tdiv[] = {
++	[0]	= {
++		.clk	= {
++			.name		= "pwm-tdiv",
++			.parent		= &clk_timer_scaler[0],
++			.get_rate	= clk_pwm_tdiv_get_rate,
++			.set_rate	= clk_pwm_tdiv_set_rate,
++			.round_rate	= clk_pwm_tdiv_round_rate,
++		},
++	},
++	[1]	= {
++		.clk	= {
++			.name		= "pwm-tdiv",
++			.parent		= &clk_timer_scaler[0],
++			.get_rate	= clk_pwm_tdiv_get_rate,
++			.set_rate	= clk_pwm_tdiv_set_rate,
++			.round_rate	= clk_pwm_tdiv_round_rate,
++		}
++	},
++	[2]	= {
++		.clk	= {
++			.name		= "pwm-tdiv",
++			.parent		= &clk_timer_scaler[1],
++			.get_rate	= clk_pwm_tdiv_get_rate,
++			.set_rate	= clk_pwm_tdiv_set_rate,
++			.round_rate	= clk_pwm_tdiv_round_rate,
++		},
++	},
++	[3]	= {
++		.clk	= {
++			.name		= "pwm-tdiv",
++			.parent		= &clk_timer_scaler[1],
++			.get_rate	= clk_pwm_tdiv_get_rate,
++			.set_rate	= clk_pwm_tdiv_set_rate,
++			.round_rate	= clk_pwm_tdiv_round_rate,
++		},
++	},
++	[4]	= {
++		.clk	= {
++			.name		= "pwm-tdiv",
++			.parent		= &clk_timer_scaler[1],
++			.get_rate	= clk_pwm_tdiv_get_rate,
++			.set_rate	= clk_pwm_tdiv_set_rate,
++			.round_rate	= clk_pwm_tdiv_round_rate,
++		},
++	},
++};
++
++static int __init clk_pwm_tdiv_register(unsigned int id)
++{
++	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
++	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++	divclk->clk.id = id;
++	divclk->divisor = tcfg_to_divisor(tcfg1);
++
++	return s3c24xx_register_clock(&divclk->clk);
++}
++
++static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
++{
++	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
++}
++
++static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
++{
++	return &clk_timer_tdiv[id].clk;
++}
++
++static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned int id = clk->id;
++	unsigned long tcfg1;
++	unsigned long flags;
++	unsigned long bits;
++	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
++
++	if (parent == s3c24xx_pwmclk_tclk(id))
++		bits = S3C2410_TCFG1_MUX_TCLK << shift;
++	else if (parent == s3c24xx_pwmclk_tdiv(id))
++		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
++	else
++		return -EINVAL;
++
++	clk->parent = parent;
++
++	local_irq_save(flags);
++
++	tcfg1 = __raw_readl(S3C2410_TCFG1);
++	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
++
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++static struct clk clk_tin[] = {
++	[0]	= {
++		.name		= "pwm-tin",
++		.id		= 0,
++		.set_parent	= clk_pwm_tin_set_parent,
++	},
++	[1]	= {
++		.name		= "pwm-tin",
++		.id		= 1,
++		.set_parent	= clk_pwm_tin_set_parent,
++	},
++	[2]	= {
++		.name		= "pwm-tin",
++		.id		= 2,
++		.set_parent	= clk_pwm_tin_set_parent,
++	},
++	[3]	= {
++		.name		= "pwm-tin",
++		.id		= 3,
++		.set_parent	= clk_pwm_tin_set_parent,
++	},
++	[4]	= {
++		.name		= "pwm-tin",
++		.id		= 4,
++		.set_parent	= clk_pwm_tin_set_parent,
++	},
++};
++
++static __init int clk_pwm_tin_register(struct clk *pwm)
++{
++	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++	unsigned int id = pwm->id;
++
++	struct clk *parent;
++	int ret;
++
++	ret = s3c24xx_register_clock(pwm);
++	if (ret < 0)
++		return ret;
++
++	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++		parent = s3c24xx_pwmclk_tclk(id);
++	else
++		parent = s3c24xx_pwmclk_tdiv(id);
++
++	return clk_set_parent(pwm, parent);
++}
++
++static __init int s3c24xx_pwmclk_init(void)
++{
++	struct clk *clk_timers;
++	unsigned int clk;
++	int ret;
++
++	clk_timers = clk_get(NULL, "timers");
++	if (IS_ERR(clk_timers)) {
++		printk(KERN_ERR "%s: no parent clock\n", __func__);
++		return -EINVAL;
++	}
++
++	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
++		clk_timer_scaler[clk].parent = clk_timers;
++		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
++		if (ret < 0) {
++			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
++			goto err;
++		}
++	}
++
++	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
++		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
++		if (ret < 0) {
++			printk(KERN_ERR "error adding pww tclk%d\n", clk);
++			goto err;
++		}
++	}
++
++	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
++		ret = clk_pwm_tdiv_register(clk);
++		if (ret < 0) {
++			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
++			goto err;
++		}
++	}
++
++	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
++		ret = clk_pwm_tin_register(&clk_tin[clk]);
++		if (ret < 0) {
++			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
++			goto err;
++		}
++	}
++
++	return 0;
++
++ err:
++	return ret;
++}
++
++arch_initcall(s3c24xx_pwmclk_init);
diff --git a/target/linux/s3c24xx/patches-2.6.30/012-s3c-usb.patch b/target/linux/s3c24xx/patches-2.6.30/012-s3c-usb.patch
new file mode 100644
index 0000000..4d89bcd
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/012-s3c-usb.patch
@@ -0,0 +1,488 @@
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/dev-usb.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/dev-usb.c	2009-05-18 19:08:30.000000000 +0200
+@@ -0,0 +1,50 @@
++/* linux/arch/arm/plat-s3c/dev-usb.c
++ *
++ * Copyright 2008 Simtec Electronics
++ *	Ben Dooks <ben@simtec.co.uk>
++ *	http://armlinux.simtec.co.uk/
++ *
++ * S3C series device definition for USB host
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++
++#include <mach/irqs.h>
++#include <mach/map.h>
++
++#include <plat/devs.h>
++
++
++static struct resource s3c_usb_resource[] = {
++	[0] = {
++		.start = S3C24XX_PA_USBHOST,
++		.end   = S3C24XX_PA_USBHOST + 0x100 - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_USBH,
++		.end   = IRQ_USBH,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static u64 s3c_device_usb_dmamask = 0xffffffffUL;
++
++struct platform_device s3c_device_usb = {
++	.name		  = "s3c-ohci",
++	.id		  = -1,
++	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
++	.resource	  = s3c_usb_resource,
++	.dev              = {
++		.dma_mask = &s3c_device_usb_dmamask,
++		.coherent_dma_mask = 0xffffffffUL
++	}
++};
++
++EXPORT_SYMBOL(s3c_device_usb);
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h	2009-05-18 19:08:30.000000000 +0200
+@@ -0,0 +1,360 @@
++/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
++ *
++ * This include file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++*/
++
++#ifndef __ASM_ARCH_REGS_USB_HS_OTG_H
++#define __ASM_ARCH_REGS_USB_HS_OTG_H
++
++/* USB2.0 OTG Controller register */
++#define S3C_USBOTG_PHYREG(x)	((x) + 0x100000 /* S3C64XX_VA_OTGSFR */)
++#define S3C_USBOTG_PHYPWR		S3C_USBOTG_PHYREG(0x0)
++#define S3C_USBOTG_PHYCLK		S3C_USBOTG_PHYREG(0x4)
++#define S3C_USBOTG_RSTCON		S3C_USBOTG_PHYREG(0x8)
++
++/* USB2.0 OTG Controller register */
++/* Core Global Registers */
++#define S3C_USBOTGREG(x)		((x) /*+ S3C64XX_VA_OTG */)
++/* OTG Control & Status */
++#define S3C_UDC_OTG_GOTGCTL		S3C_USBOTGREG(0x000)
++/* OTG Interrupt */
++#define S3C_UDC_OTG_GOTGINT		S3C_USBOTGREG(0x004)
++/* Core AHB Configuration */
++#define S3C_UDC_OTG_GAHBCFG		S3C_USBOTGREG(0x008)
++/* Core USB Configuration */
++#define S3C_UDC_OTG_GUSBCFG		S3C_USBOTGREG(0x00C)
++/* Core Reset */
++#define S3C_UDC_OTG_GRSTCTL		S3C_USBOTGREG(0x010)
++/* Core Interrupt */
++#define S3C_UDC_OTG_GINTSTS		S3C_USBOTGREG(0x014)
++/* Core Interrupt Mask */
++#define S3C_UDC_OTG_GINTMSK		S3C_USBOTGREG(0x018)
++/* Receive Status Debug Read/Status Read */
++#define S3C_UDC_OTG_GRXSTSR		S3C_USBOTGREG(0x01C)
++/* Receive Status Debug Pop/Status Pop */
++#define S3C_UDC_OTG_GRXSTSP		S3C_USBOTGREG(0x020)
++/* Receive FIFO Size */
++#define S3C_UDC_OTG_GRXFSIZ		S3C_USBOTGREG(0x024)
++/* Non-Periodic Transmit FIFO Size */
++#define S3C_UDC_OTG_GNPTXFSIZ	S3C_USBOTGREG(0x028)
++/* Non-Periodic Transmit FIFO/Queue Status */
++#define S3C_UDC_OTG_GNPTXSTS	S3C_USBOTGREG(0x02C)
++
++/* Host Periodic Transmit FIFO Size */
++#define S3C_UDC_OTG_HPTXFSIZ	S3C_USBOTGREG(0x100)
++/* Device Periodic Transmit FIFO-1 Size */
++#define S3C_UDC_OTG_DPTXFSIZ1	S3C_USBOTGREG(0x104)
++/* Device Periodic Transmit FIFO-2 Size */
++#define S3C_UDC_OTG_DPTXFSIZ2	S3C_USBOTGREG(0x108)
++/* Device Periodic Transmit FIFO-3 Size */
++#define S3C_UDC_OTG_DPTXFSIZ3	S3C_USBOTGREG(0x10C)
++/* Device Periodic Transmit FIFO-4 Size */
++#define S3C_UDC_OTG_DPTXFSIZ4	S3C_USBOTGREG(0x110)
++/* Device Periodic Transmit FIFO-5 Size */
++#define S3C_UDC_OTG_DPTXFSIZ5	S3C_USBOTGREG(0x114)
++/* Device Periodic Transmit FIFO-6 Size */
++#define S3C_UDC_OTG_DPTXFSIZ6	S3C_USBOTGREG(0x118)
++/* Device Periodic Transmit FIFO-7 Size */
++#define S3C_UDC_OTG_DPTXFSIZ7	S3C_USBOTGREG(0x11C)
++/* Device Periodic Transmit FIFO-8 Size */
++#define S3C_UDC_OTG_DPTXFSIZ8	S3C_USBOTGREG(0x120)
++/* Device Periodic Transmit FIFO-9 Size */
++#define S3C_UDC_OTG_DPTXFSIZ9	S3C_USBOTGREG(0x124)
++/* Device Periodic Transmit FIFO-10 Size */
++#define S3C_UDC_OTG_DPTXFSIZ10	S3C_USBOTGREG(0x128)
++/* Device Periodic Transmit FIFO-11 Size */
++#define S3C_UDC_OTG_DPTXFSIZ11	S3C_USBOTGREG(0x12C)
++/* Device Periodic Transmit FIFO-12 Size */
++#define S3C_UDC_OTG_DPTXFSIZ12	S3C_USBOTGREG(0x130)
++/* Device Periodic Transmit FIFO-13 Size */
++#define S3C_UDC_OTG_DPTXFSIZ13	S3C_USBOTGREG(0x134)
++/* Device Periodic Transmit FIFO-14 Size */
++#define S3C_UDC_OTG_DPTXFSIZ14	S3C_USBOTGREG(0x138)
++/* Device Periodic Transmit FIFO-15 Size */
++#define S3C_UDC_OTG_DPTXFSIZ15	S3C_USBOTGREG(0x13C)
++
++/* Host Mode Registers
++ * Host Global Registers */
++/* Host Configuration */
++#define S3C_UDC_OTG_HCFG		S3C_USBOTGREG(0x400)
++/* Host Frame Interval */
++#define S3C_UDC_OTG_HFIR		S3C_USBOTGREG(0x404)
++/* Host Frame Number/Frame Time Remaining */
++#define S3C_UDC_OTG_HFNUM		S3C_USBOTGREG(0x408)
++/* Host Periodic Transmit FIFO/Queue Status */
++#define S3C_UDC_OTG_HPTXSTS		S3C_USBOTGREG(0x410)
++/* Host All Channels Interrupt */
++#define S3C_UDC_OTG_HAINT		S3C_USBOTGREG(0x414)
++/* Host All Channels Interrupt Mask */
++#define S3C_UDC_OTG_HAINTMSK	S3C_USBOTGREG(0x418)
++
++/* Host Port Control & Status Registers */
++#define S3C_UDC_OTG_HPRT		S3C_USBOTGREG(0x440)
++
++/* Host Channel-Specific Registers */
++/* Host Channel-0 Characteristics */
++#define  S3C_UDC_OTG_HCCHAR0	S3C_USBOTGREG(0x500)
++/* Host Channel-0 Split Control */
++#define  S3C_UDC_OTG_HCSPLT0	S3C_USBOTGREG(0x504)
++/* Host Channel-0 Interrupt */
++#define  S3C_UDC_OTG_HCINT0		S3C_USBOTGREG(0x508)
++/* Host Channel-0 Interrupt Mask */
++#define  S3C_UDC_OTG_HCINTMSK0	S3C_USBOTGREG(0x50C)
++/* Host Channel-0 Transfer Size */
++#define  S3C_UDC_OTG_HCTSIZ0	S3C_USBOTGREG(0x510)
++/* Host Channel-0 DMA Address */
++#define  S3C_UDC_OTG_HCDMA0		S3C_USBOTGREG(0x514)
++
++/* Device Mode Registers
++ * Device Global Registers */
++/* Device Configuration */
++#define  S3C_UDC_OTG_DCFG		S3C_USBOTGREG(0x800)
++/* Device Control */
++#define  S3C_UDC_OTG_DCTL		S3C_USBOTGREG(0x804)
++/* Device Status */
++#define  S3C_UDC_OTG_DSTS		S3C_USBOTGREG(0x808)
++/* Device IN Endpoint Common Interrupt Mask */
++#define  S3C_UDC_OTG_DIEPMSK	S3C_USBOTGREG(0x810)
++/* Device OUT Endpoint Common Interrupt Mask */
++#define  S3C_UDC_OTG_DOEPMSK	S3C_USBOTGREG(0x814)
++/* Device All Endpoints Interrupt */
++#define  S3C_UDC_OTG_DAINT		S3C_USBOTGREG(0x818)
++/* Device All Endpoints Interrupt Mask */
++#define  S3C_UDC_OTG_DAINTMSK	S3C_USBOTGREG(0x81C)
++/* Device IN Token Sequence Learning Queue Read 1 */
++#define  S3C_UDC_OTG_DTKNQR1	S3C_USBOTGREG(0x820)
++/* Device IN Token Sequence Learning Queue Read 2 */
++#define  S3C_UDC_OTG_DTKNQR2	S3C_USBOTGREG(0x824)
++/* Device VBUS Discharge Time */
++#define  S3C_UDC_OTG_DVBUSDIS	S3C_USBOTGREG(0x828)
++/* Device VBUS Pulsing Time */
++#define  S3C_UDC_OTG_DVBUSPULSE	S3C_USBOTGREG(0x82C)
++/* Device IN Token Sequence Learning Queue Read 3 */
++#define  S3C_UDC_OTG_DTKNQR3	S3C_USBOTGREG(0x830)
++/* Device IN Token Sequence Learning Queue Read 4 */
++#define  S3C_UDC_OTG_DTKNQR4	S3C_USBOTGREG(0x834)
++
++/* Device Logical IN Endpoint-Specific Registers */
++/* Device IN Endpoint 0 Control */
++#define  S3C_UDC_OTG_DIEPCTL0	S3C_USBOTGREG(0x900)
++/* Device IN Endpoint 0 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT0	S3C_USBOTGREG(0x908)
++/* Device IN Endpoint 0 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ0	S3C_USBOTGREG(0x910)
++/* Device IN Endpoint 0 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA0	S3C_USBOTGREG(0x914)
++
++/* Device IN Endpoint 2 Control */
++#define  S3C_UDC_OTG_DIEPCTL2	S3C_USBOTGREG(0x940)
++/* Device IN Endpoint 2 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT2	S3C_USBOTGREG(0x948)
++/* Device IN Endpoint 2 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ2	S3C_USBOTGREG(0x950)
++/* Device IN Endpoint 2 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA2	S3C_USBOTGREG(0x954)
++
++/* Device IN Endpoint 3 Control */
++#define  S3C_UDC_OTG_DIEPCTL3	S3C_USBOTGREG(0x960)
++/* Device IN Endpoint 3 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT3	S3C_USBOTGREG(0x968)
++/* Device IN Endpoint 3 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ3	S3C_USBOTGREG(0x970)
++/* Device IN Endpoint 3 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA3	S3C_USBOTGREG(0x974)
++
++/* Device Logical OUT Endpoint-Specific Registers */
++/* Device OUT Endpoint 0 Control */
++#define  S3C_UDC_OTG_DOEPCTL0	S3C_USBOTGREG(0xB00)
++/* Device OUT Endpoint 0 Interrupt */
++#define  S3C_UDC_OTG_DOEPINT0	S3C_USBOTGREG(0xB08)
++/* Device OUT Endpoint 0 Transfer Size */
++#define  S3C_UDC_OTG_DOEPTSIZ0	S3C_USBOTGREG(0xB10)
++/* Device OUT Endpoint 0 DMA Address */
++#define  S3C_UDC_OTG_DOEPDMA0	S3C_USBOTGREG(0xB14)
++
++/* Device OUT Endpoint 1 Control */
++#define  S3C_UDC_OTG_DOEPCTL1	S3C_USBOTGREG(0xB20)
++/* Device OUT Endpoint 1 Interrupt */
++#define  S3C_UDC_OTG_DOEPINT1	S3C_USBOTGREG(0xB28)
++/* Device OUT Endpoint 1 Transfer Size */
++#define  S3C_UDC_OTG_DOEPTSIZ1	S3C_USBOTGREG(0xB30)
++/* Device OUT Endpoint 1 DMA Address */
++#define  S3C_UDC_OTG_DOEPDMA1	S3C_USBOTGREG(0xB34)
++
++/* Endpoint FIFO address */
++#define S3C_UDC_OTG_EP0_FIFO	S3C_USBOTGREG(0x1000)
++#define S3C_UDC_OTG_EP1_FIFO	S3C_USBOTGREG(0x2000)
++#define S3C_UDC_OTG_EP2_FIFO	S3C_USBOTGREG(0x3000)
++#define S3C_UDC_OTG_EP3_FIFO	S3C_USBOTGREG(0x4000)
++#define S3C_UDC_OTG_EP4_FIFO	S3C_USBOTGREG(0x5000)
++#define S3C_UDC_OTG_EP5_FIFO	S3C_USBOTGREG(0x6000)
++#define S3C_UDC_OTG_EP6_FIFO	S3C_USBOTGREG(0x7000)
++#define S3C_UDC_OTG_EP7_FIFO	S3C_USBOTGREG(0x8000)
++#define S3C_UDC_OTG_EP8_FIFO	S3C_USBOTGREG(0x9000)
++
++/* S3C_USBOTG_PHYPWR */
++#define OTG_ENABLE			(0x0<<4)
++#define OTG_DISABLE			(0x1<<4)
++#define ANALOG_PWR_UP		(0x0<<3)
++#define ANALOG_PWR_DOWN		(0x1<<3)
++#define SUSPEND_DISABLE		(0x0<<0)
++#define SUSPEND_ENABLE		(0x1<<0)
++
++/* S3C_USBOTG_PHYCLK */
++#define REF_CLK_CRYSTAL		(0x0<<5)
++#define REF_CLK_OSCC		(0x1<<5)
++
++/* S3C_USBOTG_RSTCON */
++#define SW_RST_OFF			(0x0<<0)
++#define SW_RST_ON			(0x1<<0)
++
++/* S3C_UDC_OTG_GOTGCTL */
++#define B_SESSION_VALID		(0x1<<19)
++#define A_SESSION_VALID		(0x1<<18)
++
++/* S3C_UDC_OTG_GAHBCFG */
++#define PTXFE_HALF			(0x0<<8)
++#define PTXFE_ZERO			(0x1<<8)
++#define NPTXFE_HALF			(0x0<<7)
++#define NPTXFE_ZERO			(0x1<<7)
++#define MODE_SLAVE			(0x0<<5)
++#define MODE_DMA			(0x1<<5)
++#define BURST_SINGLE		(0x0<<1)
++#define BURST_INCR			(0x1<<1)
++#define BURST_INCR4			(0x3<<1)
++#define BURST_INCR8			(0x5<<1)
++#define BURST_INCR16		(0x7<<1)
++#define GBL_INT_UNMASK		(0x1<<0)
++#define GBL_INT_MASK		(0x0<<0)
++
++/* S3C_UDC_OTG_GUSBCFG */
++#define PHY_CLK_480M		(0x0<<15)
++#define PHY_CLK_48M			(0x1<<15)
++#define TXFIFO_RE_DIS		(0x0<<14)
++#define TXFIFO_RE_EN		(0x1<<14)
++#define TURN_AROUND			(0x5<<10)
++#define HNP_DISABLE			(0x0<<9)
++#define HNP_ENABLE			(0x1<<9)
++#define SRP_DISABLE			(0x0<<8)
++#define SRP_ENABLE			(0x1<<8)
++#define ULPI_DDR			(0x0<<7)
++#define HS_UTMI				(0x0<<6)
++#define INTERF_UTMI			(0x0<<4)
++#define INTERF_ULPI			(0x1<<4)
++#define PHY_INTERF_8		(0x0<<3)
++#define PHY_INTERF_16		(0x1<<3)
++#define TIME_OUT_CAL		(0x7<<0)
++
++/* S3C_UDC_OTG_GRSTCTL */
++#define AHB_MASTER_IDLE		(1u<<31)
++#define CORE_SOFT_RESET		(0x1<<0)
++
++/* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */
++#define INT_RESUME			(0x1<<31)
++#define INT_DISCONN			(0x1<<29)
++#define INT_CONN_CNG		(0x1<<28)
++#define INT_OUT_EP			(0x1<<19)
++#define INT_IN_EP			(0x1<<18)
++#define INT_ENUMDONE		(0x1<<13)
++#define INT_RESET			(0x1<<12)
++#define INT_SUSPEND			(0x1<<11)
++#define INT_EARLY_SUSPEND	(0x1<<10)
++#define INT_TX_FIFO_EMPTY	(0x1<<5)
++#define INT_RX_FIFO_NOT_EMPTY	(0x1<<4)
++#define INT_SOF				(0x1<<3)
++#define INT_DEV_MODE		(0x0<<0)
++#define INT_HOST_MODE		(0x1<<1)
++
++#define FULL_SPEED_CONTROL_PKT_SIZE		8
++#define FULL_SPEED_BULK_PKT_SIZE		64
++
++#define HIGH_SPEED_CONTROL_PKT_SIZE		64
++#define HIGH_SPEED_BULK_PKT_SIZE		512
++
++/* S3C_UDC_OTG_DSTS */
++#define RX_FIFO_SIZE		(2048<<0)
++#define NPTX_FIFO_START_ADDR	(RX_FIFO_SIZE<<0)
++#define NPTX_FIFO_SIZE		(2048<<16)
++#define PTX_FIFO_SIZE		(2048<<16)
++#define USB_HIGH_30_60MHZ	(0x0<<1)
++#define USB_FULL_30_60MHZ	(0x1<<1)
++#define USB_LOW_6MHZ		(0x2<<1)
++#define USB_FULL_48MHZ		(0x3<<1)
++
++/* S3C_UDC_OTG_GRXSTSP */
++#define BYTE_COUNT(x)		((x & (0x7FF<<4)) >> 4)
++#define PKT_STS(x)			((x & (0xF<<17)) >> 17)
++#define EP_NUM(x)			(x & 0xF)
++
++#define OUT_PKT_RECEIVED	(0x2)
++#define OUT_COMPLELTED		(0x3)
++#define SETUP_COMPLETED		(0x4)
++#define SETUP_PKT_RECEIVED	(0x6)
++
++/* S3C_UDC_OTG_DCFG */
++#define EP_MIS_CNT(x)		(x<<18)
++#define DEVICE_ADDR(x)		(x<<4)
++#define SPEED_2_HIGH		(0x0<<0)
++#define SPEED_2_FULL		(0x1<<0)
++#define SPEED_1_LOW			(0x2<<0)
++#define SPEED_1_FULL		(0x3<<0)
++
++/* S3C_UDC_OTG_DCTL device control register */
++#define NORMAL_OPERATION	(0x1<<0)
++#define SOFT_DISCONNECT		(0x1<<1)
++
++/* S3C_UDC_OTG_DSTS */
++#define ENUM_SPEED(x)		(x & (0x3<<1))
++#define FRAME_CNT(x)		(x & (0x3ff<<8))
++
++/* S3C_UDC_OTG_DAINT device all endpoint interrupt register */
++#define S3C_UDC_INT_IN_EP0	(0x1<<0)
++#define S3C_UDC_INT_IN_EP2	(0x1<<2)
++#define S3C_UDC_INT_IN_EP3	(0x1<<3)
++#define S3C_UDC_INT_OUT_EP0	(0x1<<16)
++#define S3C_UDC_INT_OUT_EP1	(0x1<<17)
++#define S3C_UDC_INT_OUT_EP4	(0x1<<20)
++
++/* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device control
++   IN/OUT endpoint 0 control register */
++#define DEPCTL_EPENA		(0x1<<31)
++#define DEPCTL_EPDIS		(0x1<<30)
++#define DEPCTL_SNAK			(0x1<<27)
++#define DEPCTL_CNAK			(0x1<<26)
++#define DEPCTL_CTRL_TYPE	(0x0<<18)
++#define DEPCTL_ISO_TYPE		(0x1<<18)
++#define DEPCTL_BULK_TYPE	(0x2<<18)
++#define DEPCTL_INTR_TYPE	(0x3<<18)
++#define DEPCTL_USBACTEP		(0x1<<15)
++#define DEPCTL0_MPS_64		(0x0<<0)
++#define DEPCTL0_MPS_32		(0x1<<0)
++#define DEPCTL0_MPS_16		(0x2<<0)
++#define DEPCTL0_MPS_8		(0x3<<0)
++
++/* S3C_UDC_OTG_DIEPINTn */
++#define IN_EP_NAK_EFF		(0x1<<6)
++#define IN_TK_EPMIS			(0x1<<5)
++#define IN_TK_TXFEMP		(0x1<<4)
++#define IN_EP_TIMEOUT		(0x1<<3)
++
++/* S3C_UDC_OTG_DOEPINTn */
++#define BACK2BACK_SETUP		(0x1<<6)
++#define OUT_TK_EP_DIS		(0x1<<4)
++#define SETUP_PHASE_DONE	(0x1<<3)
++
++/* S3C_UDC_OTG_DIEPINTn/DOEPINTn */
++#define AHB_ERROR			(0x1<<2)
++#define EPDISBLD			(0x1<<1)
++#define TRANSFER_DONE		(0x1<<0)
++
++/* S3C_UDC_OTG_DIEPTSIZn */
++#define PKT_CNT(x)			(x<<19)
++#define XFERSIZE(x)			(x<<0)
++
++#endif
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Kconfig	2009-05-18 19:08:30.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Kconfig	2009-05-18 19:08:30.000000000 +0200
+@@ -184,4 +184,9 @@
+ 	help
+ 	  Compile in platform device definition for framebuffer
+ 
++config S3C_DEV_USB_HOST
++	bool
++	help
++	  Compile in platform device definition for USB host.
++
+ endif
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Makefile	2009-05-18 19:08:30.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile	2009-05-18 19:08:30.000000000 +0200
+@@ -35,6 +35,8 @@
+ obj-y				+= dev-i2c0.o
+ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+ obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
++obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
++
+ obj-$(CONFIG_S3C_PWM)		+= pwm.o
+ obj-$(CONFIG_S3C_DMA)		+= dma.o
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/devs.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/devs.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/devs.c	2009-05-18 19:08:30.000000000 +0200
+@@ -136,36 +136,6 @@
+ struct platform_device *s3c24xx_uart_devs[4] = {
+ };
+ 
+-/* USB Host Controller */
+-
+-static struct resource s3c_usb_resource[] = {
+-	[0] = {
+-		.start = S3C24XX_PA_USBHOST,
+-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+-		.flags = IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start = IRQ_USBH,
+-		.end   = IRQ_USBH,
+-		.flags = IORESOURCE_IRQ,
+-	}
+-};
+-
+-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+-
+-struct platform_device s3c_device_usb = {
+-	.name		  = "s3c2410-ohci",
+-	.id		  = -1,
+-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+-	.resource	  = s3c_usb_resource,
+-	.dev              = {
+-		.dma_mask = &s3c_device_usb_dmamask,
+-		.coherent_dma_mask = 0xffffffffUL
+-	}
+-};
+-
+-EXPORT_SYMBOL(s3c_device_usb);
+-
+ /* LCD Controller */
+ 
+ static struct resource s3c_lcd_resource[] = {
diff --git a/target/linux/s3c24xx/patches-2.6.30/013-fiq_c_handler.patch b/target/linux/s3c24xx/patches-2.6.30/013-fiq_c_handler.patch
new file mode 100644
index 0000000..1631ff4
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/013-fiq_c_handler.patch
@@ -0,0 +1,294 @@
+Index: linux-2.6.30-rc6/arch/arm/kernel/fiq.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/kernel/fiq.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/kernel/fiq.c	2009-05-18 19:08:30.000000000 +0200
+@@ -8,6 +8,8 @@
+  *
+  *  FIQ support re-written by Russell King to be more generic
+  *
++ *  FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
++ *
+  * We now properly support a method by which the FIQ handlers can
+  * be stacked onto the vector.  We still do not support sharing
+  * the FIQ vector itself.
+@@ -124,6 +126,83 @@
+ 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
+ }
+ 
++/* -------- FIQ handler in C ---------
++ *
++ * Major Caveats for using this
++ *  ---------------------------
++ *  *
++ *  * 1) it CANNOT touch any vmalloc()'d memory, only memory
++ *    that was kmalloc()'d.  Static allocations in the monolithic kernel
++ *    are kmalloc()'d so they are okay.  You can touch memory-mapped IO, but
++ *    the pointer for it has to have been stored in kmalloc'd memory.  The
++ *    reason for this is simple: every now and then Linux turns off interrupts
++ *    and reorders the paging tables.  If a FIQ happens during this time, the
++ *    virtual memory space can be partly or entirely disordered or missing.
++ *
++ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
++ *    ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module.  But the way
++ *    it is set up, you can all to enable and disable it from your module
++ *    and intercommunicate with it through struct fiq_ipc
++ *    fiq_ipc which you can define in
++ *    asm/archfiq_ipc_type.h.  The reason is the same as above, a
++ *    FIQ could happen while even the ISR is not present in virtual memory
++ *    space due to pagetables being changed at the time.
++ *
++ * 3) You can't call any Linux API code except simple macros
++ *    - understand that FIQ can come in at any time, no matter what
++ *      state of undress the kernel may privately be in, thinking it
++ *      locked the door by turning off interrupts... FIQ is an
++ *      unstoppable monster force (which is its value)
++ *    - they are not vmalloc()'d memory safe
++ *    - they might do crazy stuff like sleep: FIQ pisses fire and
++ *      is not interested in 'sleep' that the weak seem to need
++ *    - calling APIs from FIQ can re-enter un-renterable things
++ *    - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
++ *
++ * If you follow these rules, it is fantastic, an extremely powerful, solid,
++ * genuine hard realtime feature.
++ */
++
++static void (*current_fiq_c_isr)(void);
++#define FIQ_C_ISR_STACK_SIZE 	256
++
++static void __attribute__((naked)) __jump_to_isr(void)
++{
++	asm __volatile__ ("mov pc, r8");
++}
++
++
++static void __attribute__((naked)) __actual_isr(void)
++{
++	asm __volatile__ (
++		"stmdb	sp!, {r0-r12, lr};"
++		"mov     fp, sp;"
++	);
++
++	current_fiq_c_isr();
++
++	asm __volatile__ (
++		"ldmia	sp!, {r0-r12, lr};"
++		"subs	pc, lr, #4;"
++	);
++}
++
++void set_fiq_c_handler(void (*isr)(void))
++{
++	struct pt_regs regs;
++
++	memset(&regs, 0, sizeof(regs));
++	regs.ARM_r8 = (unsigned long) __actual_isr;
++	regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
++
++	set_fiq_handler(__jump_to_isr, 4);
++
++	current_fiq_c_isr = isr;
++
++	set_fiq_regs(&regs);
++}
++/* -------- FIQ handler in C ---------*/
++
+ int claim_fiq(struct fiq_handler *f)
+ {
+ 	int ret = 0;
+Index: linux-2.6.30-rc6/arch/arm/include/asm/fiq.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/include/asm/fiq.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/include/asm/fiq.h	2009-05-18 19:08:30.000000000 +0200
+@@ -29,8 +29,9 @@
+ extern int claim_fiq(struct fiq_handler *f);
+ extern void release_fiq(struct fiq_handler *f);
+ extern void set_fiq_handler(void *start, unsigned int length);
+-extern void set_fiq_regs(struct pt_regs *regs);
+-extern void get_fiq_regs(struct pt_regs *regs);
++extern void set_fiq_c_handler(void (*handler)(void));
++extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
++extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
+ extern void enable_fiq(int fiq);
+ extern void disable_fiq(int fiq);
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/irq.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/irq.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/irq.h	2009-05-18 19:08:30.000000000 +0200
+@@ -12,6 +12,7 @@
+ 
+ #include <linux/io.h>
+ 
++#include <mach/irqs.h>
+ #include <mach/hardware.h>
+ #include <mach/regs-irq.h>
+ #include <mach/regs-gpio.h>
+@@ -31,8 +32,15 @@
+ {
+ 	unsigned long mask;
+ 	unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 
+ 	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -45,6 +53,9 @@
+ 
+ 	/* write back masks */
+ 	__raw_writel(submask, S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ 
+ }
+ 
+@@ -53,8 +64,15 @@
+ {
+ 	unsigned long mask;
+ 	unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 
+ 	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -63,6 +81,9 @@
+ 	/* write back masks */
+ 	__raw_writel(submask, S3C2410_INTSUBMSK);
+ 	__raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/irq.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq.c	2009-05-18 19:08:30.000000000 +0200
+@@ -28,6 +28,8 @@
+ #include <asm/mach/irq.h>
+ 
+ #include <plat/regs-irqtype.h>
++#include <mach/regs-irq.h>
++#include <mach/regs-gpio.h>
+ 
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -37,12 +39,20 @@
+ s3c_irq_mask(unsigned int irqno)
+ {
+ 	unsigned long mask;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 	irqno -= IRQ_EINT0;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	mask |= 1UL << irqno;
+ 	__raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ static inline void
+@@ -59,9 +69,19 @@
+ {
+ 	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+ 	unsigned long mask;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
++
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	__raw_writel(mask|bitval, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ 
+ 	__raw_writel(bitval, S3C2410_SRCPND);
+ 	__raw_writel(bitval, S3C2410_INTPND);
+@@ -72,15 +92,25 @@
+ s3c_irq_unmask(unsigned int irqno)
+ {
+ 	unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ 		irqdbf2("s3c_irq_unmask %d\n", irqno);
+ 
+ 	irqno -= IRQ_EINT0;
+ 
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	mask &= ~(1UL << irqno);
+ 	__raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ struct irq_chip s3c_irq_level_chip = {
+@@ -523,26 +553,26 @@
+ 
+ 	last = 0;
+ 	for (i = 0; i < 4; i++) {
+-		pend = __raw_readl(S3C2410_INTPND);
++		pend = __raw_readl(S3C2410_SUBSRCPND);
+ 
+ 		if (pend == 0 || pend == last)
+ 			break;
+ 
+-		__raw_writel(pend, S3C2410_SRCPND);
+-		__raw_writel(pend, S3C2410_INTPND);
+-		printk("irq: clearing pending status %08x\n", (int)pend);
++		printk("irq: clearing subpending status %08x\n", (int)pend);
++		__raw_writel(pend, S3C2410_SUBSRCPND);
+ 		last = pend;
+ 	}
+ 
+ 	last = 0;
+ 	for (i = 0; i < 4; i++) {
+-		pend = __raw_readl(S3C2410_SUBSRCPND);
++		pend = __raw_readl(S3C2410_INTPND);
+ 
+ 		if (pend == 0 || pend == last)
+ 			break;
+ 
+-		printk("irq: clearing subpending status %08x\n", (int)pend);
+-		__raw_writel(pend, S3C2410_SUBSRCPND);
++		__raw_writel(pend, S3C2410_SRCPND);
++		__raw_writel(pend, S3C2410_INTPND);
++		printk("irq: clearing pending status %08x\n", (int)pend);
+ 		last = pend;
+ 	}
+ 
diff --git a/target/linux/s3c24xx/patches-2.6.30/014-neo1973_mach.patch b/target/linux/s3c24xx/patches-2.6.30/014-neo1973_mach.patch
new file mode 100644
index 0000000..af93ee2
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/014-neo1973_mach.patch
@@ -0,0 +1,50 @@
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/Kconfig	2009-05-18 19:08:29.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/Kconfig	2009-05-18 19:08:31.000000000 +0200
+@@ -112,4 +112,20 @@
+ 	help
+ 	  Common machine code for SMDK2410 and SMDK2440
+ 
++config MACH_NEO1973
++	bool
++	select RFKILL
++	select SERIAL_SAMSUNG
++	select SERIAL_SAMSUNG_CONSOLE
++	help
++	  Common machine code for Neo1973 hardware
++
++config MACH_NEO1973
++	bool
++	select RFKILL
++	select SERIAL_SAMSUNG
++	select SERIAL_SAMSUNG_CONSOLE
++	help
++	  Common machine code for Neo1973 hardware
++
+ endif
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/Makefile	2009-05-18 19:08:31.000000000 +0200
+@@ -14,3 +14,9 @@
+ 
+ # Machine support
+ 
++obj-$(CONFIG_MACH_NEO1973)	+= \
++                                   gta02-pm-gsm.o \
++                                   gta02-pm-gps.o \
++                                   gta02-pm-bt.o  \
++                                   gta02-pm-wlan.o  \
++                                   gta02-shadow.o
+Index: linux-2.6.30-rc6/drivers/misc/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/misc/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/misc/Makefile	2009-05-18 19:08:31.000000000 +0200
+@@ -21,3 +21,6 @@
+ obj-$(CONFIG_ISL29003)		+= isl29003.o
+ obj-$(CONFIG_C2PORT)		+= c2port/
+ obj-y				+= eeprom/
++obj-$(CONFIG_MACH_NEO1973)      += gta02_pm_host.o \
++                                   gta02_pm_resume_reason.o
++
diff --git a/target/linux/s3c24xx/patches-2.6.30/015-mach-gta02.patch b/target/linux/s3c24xx/patches-2.6.30/015-mach-gta02.patch
new file mode 100644
index 0000000..dc1410f
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/015-mach-gta02.patch
@@ -0,0 +1,91 @@
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/Kconfig	2009-05-18 19:08:29.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/Kconfig	2009-05-18 19:08:31.000000000 +0200
+@@ -25,6 +25,20 @@
+ 	depends on ARCH_S3C2440
+ 	select CPU_S3C2442
+ 
++config MACH_NEO1973_GTA02
++	bool "Openmoko Freerunner GSM Phone (GTA02 Hardware)"
++	select CPU_S3C2442
++	select MFD_PCF50633
++	select PCF50633_GPIO
++	select I2C
++	select POWER_SUPPLY
++	select MACH_NEO1973
++	select S3C_PWM
++	select FIQ
++	select S3C_DEV_USB_HOST
++	help
++	   Say Y here if you are using the Openmoko Freerunner GSM Phone
++
+ 
+ endmenu
+ 
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/Makefile	2009-05-18 19:08:31.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/Makefile	2009-05-18 19:08:31.000000000 +0200
+@@ -9,8 +9,11 @@
+ obj-n				:=
+ obj-				:=
+ 
++obj-$(CONFIG_S3C2440_C_FIQ)	+= fiq_c_isr.o
++
+ obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+ obj-$(CONFIG_CPU_S3C2442)	+= clock.o
++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+ 
+ # Machine support
+ 
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/irqs.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/include/mach/irqs.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/irqs.h	2009-05-18 19:08:31.000000000 +0200
+@@ -153,9 +153,9 @@
+ #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+ 
+ #ifdef CONFIG_CPU_S3C2443
+-#define NR_IRQS (IRQ_S3C2443_AC97+1)
++#define _NR_IRQS (IRQ_S3C2443_AC97+1)
+ #else
+-#define NR_IRQS (IRQ_S3C2440_AC97+1)
++#define _NR_IRQS (IRQ_S3C2440_AC97+1)
+ #endif
+ 
+ /* compatibility define. */
+@@ -167,4 +167,33 @@
+ /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+ #define FIQ_START		IRQ_EINT0
+ 
++
++/*
++ * The next 16 interrupts are for board specific purposes.  Since
++ * the kernel can only run on one machine at a time, we can re-use
++ * these.  If you need more, increase IRQ_BOARD_END, but keep it
++ * within sensible limits.
++ */
++#define IRQ_BOARD_START         _NR_IRQS
++#define IRQ_BOARD_END           (_NR_IRQS + 10)
++
++#if defined(CONFIG_MACH_NEO1973_GTA02)
++#define NR_IRQS                 (IRQ_BOARD_END)
++#else
++#define NR_IRQS                 (IRQ_BOARD_START)
++#endif
++
++/* Neo1973 GTA02 interrupts */
++#define NEO1973_GTA02_IRQ(x)    (IRQ_BOARD_START + (x))
++#define IRQ_GLAMO(x)            NEO1973_GTA02_IRQ(x)
++#define IRQ_GLAMO_HOSTBUS       IRQ_GLAMO(0)
++#define IRQ_GLAMO_JPEG          IRQ_GLAMO(1)
++#define IRQ_GLAMO_MPEG          IRQ_GLAMO(2)
++#define IRQ_GLAMO_MPROC1        IRQ_GLAMO(3)
++#define IRQ_GLAMO_MPROC0        IRQ_GLAMO(4)
++#define IRQ_GLAMO_CMDQUEUE      IRQ_GLAMO(5)
++#define IRQ_GLAMO_2D            IRQ_GLAMO(6)
++#define IRQ_GLAMO_MMC           IRQ_GLAMO(7)
++#define IRQ_GLAMO_RISC          IRQ_GLAMO(8)
++
+ #endif /* __ASM_ARCH_IRQ_H */
diff --git a/target/linux/s3c24xx/patches-2.6.30/050-s3c2442-touchscreen.patch b/target/linux/s3c24xx/patches-2.6.30/050-s3c2442-touchscreen.patch
new file mode 100644
index 0000000..4015f93
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/050-s3c2442-touchscreen.patch
@@ -0,0 +1,154 @@
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/devs.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/devs.c	2009-05-18 19:08:30.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/devs.c	2009-05-18 19:08:31.000000000 +0200
+@@ -26,6 +26,8 @@
+ #include <asm/mach/irq.h>
+ #include <mach/fb.h>
+ #include <mach/hardware.h>
++#include <mach/ts.h>
++#include <asm/io.h>
+ #include <asm/irq.h>
+ 
+ #include <plat/regs-serial.h>
+@@ -199,6 +201,24 @@
+ 
+ EXPORT_SYMBOL(s3c_device_nand);
+ 
++/* Touchscreen */
++struct platform_device s3c_device_ts = {
++	.name		  = "s3c2410-ts",
++	.id		  = -1,
++};
++
++EXPORT_SYMBOL(s3c_device_ts);
++
++static struct s3c2410_ts_mach_info s3c2410ts_info;
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
++{
++	memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
++	       sizeof(struct s3c2410_ts_mach_info));
++	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
++}
++EXPORT_SYMBOL(set_s3c2410ts_info);
++
+ /* USB Device (Gadget)*/
+ 
+ static struct resource s3c_usbgadget_resource[] = {
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/s3c244x.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/s3c244x.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/s3c244x.c	2009-05-18 19:08:31.000000000 +0200
+@@ -59,6 +59,8 @@
+ 	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+ }
+ 
++extern struct platform_device s3c_device_ts;
++
+ void __init s3c244x_map_io(void)
+ {
+ 	/* register our io-tables */
+@@ -70,6 +72,7 @@
+ 	s3c_device_sdi.name  = "s3c2440-sdi";
+ 	s3c_device_i2c0.name  = "s3c2440-i2c";
+ 	s3c_device_nand.name = "s3c2440-nand";
++	s3c_device_ts.name = "s3c2440-ts";
+ 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ }
+ 
+Index: linux-2.6.30-rc6/drivers/input/touchscreen/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/touchscreen/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/touchscreen/Kconfig	2009-05-18 19:08:31.000000000 +0200
+@@ -124,6 +124,24 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called fujitsu-ts.
+ 
++config TOUCHSCREEN_S3C2410
++	tristate "Samsung S3C2410 touchscreen input driver"
++	depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
++	select SERIO
++	help
++	  Say Y here if you have the s3c2410 touchscreen.
++
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called s3c2410_ts.
++
++config TOUCHSCREEN_S3C2410_DEBUG
++	boolean "Samsung S3C2410 touchscreen debug messages"
++	depends on TOUCHSCREEN_S3C2410
++	help
++	  Select this if you want debug messages
++
+ config TOUCHSCREEN_GUNZE
+ 	tristate "Gunze AHL-51S touchscreen"
+ 	select SERIO
+Index: linux-2.6.30-rc6/drivers/input/touchscreen/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/touchscreen/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/touchscreen/Makefile	2009-05-18 19:08:31.000000000 +0200
+@@ -37,3 +37,4 @@
+ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
++obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/ts.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/ts.h	2009-05-18 19:08:31.000000000 +0200
+@@ -0,0 +1,35 @@
++/* arch/arm/mach-s3c2410/include/mach/ts.h
++ *
++ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ *  Changelog:
++ *     24-Mar-2005     RTP     Created file
++ *     03-Aug-2005     RTP     Renamed to ts.h
++ */
++
++#ifndef __ASM_ARM_TS_H
++#define __ASM_ARM_TS_H
++
++#include <linux/touchscreen/ts_filter.h>
++
++struct s3c2410_ts_mach_info {
++	/* Touchscreen delay. */
++	int delay;
++	/* Prescaler value. */
++	int presc;
++	/*
++	 * Null-terminated array of pointers to filter APIs and configurations
++	 * we want to use. In the same order they will be applied.
++	 */
++	const struct ts_filter_chain_configuration *filter_config;
++};
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
++
++#endif /* __ASM_ARM_TS_H */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/devs.h	2009-05-18 19:07:48.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h	2009-05-18 19:08:31.000000000 +0200
+@@ -50,10 +50,11 @@
+ 
+ extern struct platform_device s3c_device_usbgadget;
+ 
++extern struct platform_device s3c_device_ts;
++
+ /* s3c2440 specific devices */
+ 
+ #ifdef CONFIG_CPU_S3C2440
+ 
+ extern struct platform_device s3c_device_camif;
+-
+ #endif
diff --git a/target/linux/s3c24xx/patches-2.6.30/051-gta02kbd.patch b/target/linux/s3c24xx/patches-2.6.30/051-gta02kbd.patch
new file mode 100644
index 0000000..35a39f6
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/051-gta02kbd.patch
@@ -0,0 +1,32 @@
+Index: linux-2.6.30-rc6/drivers/input/keyboard/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/keyboard/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/keyboard/Kconfig	2009-05-18 19:08:32.000000000 +0200
+@@ -332,4 +332,15 @@
+ 
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called sh_keysc.
++config KEYBOARD_GTA02
++	tristate "Openmoko Freerunner buttons"
++	depends on MACH_NEO1973
++	default y
++	help
++	  Say Y here to enable the buttons on the Openmoko Freerunner 
++	  GSM phone.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gta02kbd.
++
+ endif
+Index: linux-2.6.30-rc6/drivers/input/keyboard/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/keyboard/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/keyboard/Makefile	2009-05-18 19:08:32.000000000 +0200
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
+ obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+ obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
++obj-$(CONFIG_KEYBOARD_GTA02)		+= gta02kbd.o
+ obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
+ obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+ obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/052-touchscreen_filter.patch b/target/linux/s3c24xx/patches-2.6.30/052-touchscreen_filter.patch
new file mode 100644
index 0000000..9125da1
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/052-touchscreen_filter.patch
@@ -0,0 +1,72 @@
+Index: linux-2.6.30-rc6/drivers/input/touchscreen/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/touchscreen/Kconfig	2009-05-18 19:08:31.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/touchscreen/Kconfig	2009-05-18 19:08:32.000000000 +0200
+@@ -11,6 +11,54 @@
+ 
+ if INPUT_TOUCHSCREEN
+ 
++menuconfig TOUCHSCREEN_FILTER
++	boolean "Touchscreen Filtering"
++	depends on INPUT_TOUCHSCREEN
++	select TOUCHSCREEN_FILTER_GROUP
++	select TOUCHSCREEN_FILTER_MEDIAN
++	select TOUCHSCREEN_FILTER_MEAN
++	select TOUCHSCREEN_FILTER_LINEAR
++	help
++	  Select this to include kernel touchscreen filter support.  The filters
++	  can be combined in any order in your machine init and the parameters
++	  for them can also be set there.
++
++if TOUCHSCREEN_FILTER
++
++config TOUCHSCREEN_FILTER_GROUP
++	bool "Group Touchscreen Filter"
++	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++	default Y
++	help
++	  Say Y here if you want to use the Group touchscreen filter, it
++	  avoids using atypical samples.
++
++config TOUCHSCREEN_FILTER_MEDIAN
++	bool "Median Average Touchscreen Filter"
++	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++	default Y
++	help
++	  Say Y here if you want to use the Median touchscreen filter, it's
++	  highly effective if you data is noisy with occasional excursions.
++
++config TOUCHSCREEN_FILTER_MEAN
++	bool "Mean Average Touchscreen Filter"
++	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++	default Y
++	help
++	  Say Y here if you want to use the Mean touchscreen filter, it
++	  can further improve decent quality data by removing jitter
++
++config TOUCHSCREEN_FILTER_LINEAR
++	bool "Linear Touchscreen Filter"
++	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++	default Y
++	help
++	  Say Y here if you want to use the Linear touchscreen filter, it
++	  enables the use of calibration data for the touchscreen.
++
++endif
++
+ config TOUCHSCREEN_ADS7846
+ 	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+ 	depends on SPI_MASTER
+Index: linux-2.6.30-rc6/drivers/input/touchscreen/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/touchscreen/Makefile	2009-05-18 19:08:31.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/touchscreen/Makefile	2009-05-18 19:08:32.000000000 +0200
+@@ -38,3 +38,8 @@
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER)	+= ts_filter_chain.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_GROUP)	+= ts_filter_group.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_LINEAR)	+= ts_filter_linear.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEDIAN)	+= ts_filter_median.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEAN)	+= ts_filter_mean.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/053-glamo.patch b/target/linux/s3c24xx/patches-2.6.30/053-glamo.patch
new file mode 100644
index 0000000..d0a78d5
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/053-glamo.patch
@@ -0,0 +1,37 @@
+Index: linux-2.6.30-rc6/drivers/mfd/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mfd/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mfd/Kconfig	2009-05-18 19:08:32.000000000 +0200
+@@ -241,6 +241,8 @@
+ 	 Say yes here if you want to include support GPIO for pins on
+ 	 the PCF50633 chip.
+ 
++source "drivers/mfd/glamo/Kconfig"
++
+ endmenu
+ 
+ menu "Multimedia Capabilities Port drivers"
+Index: linux-2.6.30-rc6/drivers/mfd/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mfd/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mfd/Makefile	2009-05-18 19:08:32.000000000 +0200
+@@ -4,6 +4,7 @@
+ 
+ obj-$(CONFIG_MFD_SM501)		+= sm501.o
+ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
++obj-$(CONFIG_MFD_GLAMO)		+= glamo/
+ 
+ obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
+ obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
+Index: linux-2.6.30-rc6/include/linux/fb.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/fb.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/fb.h	2009-05-18 19:08:32.000000000 +0200
+@@ -124,6 +124,7 @@
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
diff --git a/target/linux/s3c24xx/patches-2.6.30/054-bq27000.patch b/target/linux/s3c24xx/patches-2.6.30/054-bq27000.patch
new file mode 100644
index 0000000..e23a383
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/054-bq27000.patch
@@ -0,0 +1,35 @@
+Index: linux-2.6.30-rc6/drivers/power/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/power/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/power/Kconfig	2009-05-18 19:08:32.000000000 +0200
+@@ -88,4 +88,16 @@
+ 	help
+ 	 Say Y to include support for NXP PCF50633 Main Battery Charger.
+ 
++config BATTERY_BQ27000_HDQ
++	tristate "BQ27000 HDQ battery monitor driver"
++	help
++	  Say Y to enable support for the battery on the Neo Freerunner
++
++config HDQ_GPIO_BITBANG
++	bool "Generic gpio based HDQ bitbang"
++	help
++	  Say Y to enable supoort for generic gpio based HDQ bitbang driver.
++	  This can not be built as a module.
++
+ endif # POWER_SUPPLY
++
+Index: linux-2.6.30-rc6/drivers/power/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/power/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/power/Makefile	2009-05-18 19:08:32.000000000 +0200
+@@ -25,4 +25,7 @@
+ obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
+ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
+ obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+-obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
+\ No newline at end of file
++obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
++obj-$(CONFIG_BATTERY_BQ27000_HDQ)	+= bq27000_battery.o
++
++obj-$(CONFIG_HDQ_GPIO_BITBANG)  += hdq.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/055-gta02-leds.patch b/target/linux/s3c24xx/patches-2.6.30/055-gta02-leds.patch
new file mode 100644
index 0000000..f85a1e7
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/055-gta02-leds.patch
@@ -0,0 +1,37 @@
+Index: linux-2.6.30-rc6/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/leds/Kconfig	2009-05-18 19:07:07.000000000 +0200
++++ linux-2.6.30-rc6/drivers/leds/Kconfig	2009-05-18 19:08:33.000000000 +0200
+@@ -227,6 +227,19 @@
+ 	  This option enables support for BD2802GU RGB LED driver chips
+ 	  accessed via the I2C bus.
+ 
++config LEDS_GTA02_VIBRATOR
++	tristate "Vibrator Support for the Openmoko Freerunner GSM phone"
++	depends on LEDS_CLASS && MACH_NEO1973_GTA02
++ 	help
++	  This option enables support for the vibrator on the Openmoko Freerunner.
++
++config LEDS_GTA02
++	tristate "LED Support for the Openmoko Freerunner GSM phone"
++	depends on LEDS_CLASS && MACH_NEO1973_GTA02
++ 	help
++	  This option enables support for the LEDs on the Openmoko Freerunner.
++
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+Index: linux-2.6.30-rc6/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/leds/Makefile	2009-05-18 19:07:07.000000000 +0200
++++ linux-2.6.30-rc6/drivers/leds/Makefile	2009-05-18 19:08:33.000000000 +0200
+@@ -30,6 +30,8 @@
+ 
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
++obj-$(CONFIG_LEDS_GTA02_VIBRATOR)	+= leds-gta02-vibrator.o
++obj-$(CONFIG_LEDS_GTA02)	+= leds-gta02.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/055-jbt6k74.patch b/target/linux/s3c24xx/patches-2.6.30/055-jbt6k74.patch
new file mode 100644
index 0000000..5a5b742
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/055-jbt6k74.patch
@@ -0,0 +1,30 @@
+Index: linux-2.6.30-rc6/drivers/video/display/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/video/display/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/video/display/Kconfig	2009-05-18 19:08:33.000000000 +0200
+@@ -21,4 +21,15 @@
+ comment "Display hardware drivers"
+ 	depends on DISPLAY_SUPPORT
+ 
++config DISPLAY_JBT6K74
++	tristate "TPO JBT6K74-AS TFT display ASIC control interface"
++	depends on SPI_MASTER && SYSFS
++	help
++	  SPI driver for the control interface of TFT panels containing
++	  the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
++	  TFT diplay module used in the Openmoko Freerunner GSM phone.
++
++	  The control interface is required for display operation, as it
++	  controls power management, display timing and gamma calibration.
++
+ endmenu
+Index: linux-2.6.30-rc6/drivers/video/display/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/video/display/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/video/display/Makefile	2009-05-18 19:08:33.000000000 +0200
+@@ -3,4 +3,5 @@
+ display-objs				:= display-sysfs.o
+ 
+ obj-$(CONFIG_DISPLAY_SUPPORT)		+= display.o
++obj-$(CONFIG_DISPLAY_JBT6K74)		+= jbt6k74.o
+ 
diff --git a/target/linux/s3c24xx/patches-2.6.30/056-pcf50633.patch b/target/linux/s3c24xx/patches-2.6.30/056-pcf50633.patch
new file mode 100644
index 0000000..e05e051
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/056-pcf50633.patch
@@ -0,0 +1,375 @@
+Index: linux-2.6.30-rc6/drivers/mfd/pcf50633-core.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mfd/pcf50633-core.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mfd/pcf50633-core.c	2009-05-18 19:08:33.000000000 +0200
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/device.h>
+ #include <linux/sysfs.h>
++#include <linux/device.h>
+ #include <linux/module.h>
+ #include <linux/types.h>
+ #include <linux/interrupt.h>
+@@ -345,6 +346,8 @@
+ 		goto out;
+ 	}
+ 
++	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,	0x04 );  /* defeat 8s death from lowsys on A5 */
++
+ 	/* We immediately read the usb and adapter status. We thus make sure
+ 	 * only of USBINS/USBREM IRQ handlers are called */
+ 	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+@@ -443,7 +446,8 @@
+ 	dev_dbg(pcf->dev, "pcf50633_irq\n");
+ 
+ 	get_device(pcf->dev);
+-	disable_irq(pcf->irq);
++	disable_irq_nosync(pcf->irq);
++
+ 	schedule_work(&pcf->irq_work);
+ 
+ 	return IRQ_HANDLED;
+@@ -482,13 +486,13 @@
+ }
+ 
+ #ifdef CONFIG_PM
+-static int pcf50633_suspend(struct device *dev, pm_message_t state)
++static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
+ {
+ 	struct pcf50633 *pcf;
+ 	int ret = 0, i;
+ 	u8 res[5];
+ 
+-	pcf = dev_get_drvdata(dev);
++	pcf = i2c_get_clientdata(client);
+ 
+ 	/* Make sure our interrupt handlers are not called
+ 	 * henceforth */
+@@ -523,12 +527,12 @@
+ 	return ret;
+ }
+ 
+-static int pcf50633_resume(struct device *dev)
++static int pcf50633_resume(struct i2c_client *client)
+ {
+ 	struct pcf50633 *pcf;
+ 	int ret;
+ 
+-	pcf = dev_get_drvdata(dev);
++	pcf = i2c_get_clientdata(client);
+ 
+ 	/* Write the saved mask registers */
+ 	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+@@ -625,6 +629,7 @@
+ 	}
+ 
+ 	if (client->irq) {
++		set_irq_handler(client->irq, handle_level_irq);
+ 		ret = request_irq(client->irq, pcf50633_irq,
+ 				IRQF_TRIGGER_LOW, "pcf50633", pcf);
+ 
+@@ -683,12 +688,12 @@
+ static struct i2c_driver pcf50633_driver = {
+ 	.driver = {
+ 		.name	= "pcf50633",
+-		.suspend = pcf50633_suspend,
+-		.resume	= pcf50633_resume,
+ 	},
+ 	.id_table = pcf50633_id_table,
+ 	.probe = pcf50633_probe,
+ 	.remove = __devexit_p(pcf50633_remove),
++	.suspend = pcf50633_suspend,
++	.resume	= pcf50633_resume,
+ };
+ 
+ static int __init pcf50633_init(void)
+Index: linux-2.6.30-rc6/drivers/power/pcf50633-charger.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/power/pcf50633-charger.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/power/pcf50633-charger.c	2009-05-18 19:08:33.000000000 +0200
+@@ -36,6 +36,7 @@
+ 
+ 	struct power_supply usb;
+ 	struct power_supply adapter;
++	struct power_supply ac;
+ 
+ 	struct delayed_work charging_restart_work;
+ };
+@@ -47,16 +48,21 @@
+ 	u8 bits;
+ 	int charging_start = 1;
+ 	u8 mbcs2, chgmod;
++	unsigned int mbcc5;
+ 
+-	if (ma >= 1000)
++	if (ma >= 1000) {
+ 		bits = PCF50633_MBCC7_USB_1000mA;
+-	else if (ma >= 500)
++		ma = 1000;
++	} else if (ma >= 500) {
+ 		bits = PCF50633_MBCC7_USB_500mA;
+-	else if (ma >= 100)
++		ma = 500;
++	} else if (ma >= 100) {
+ 		bits = PCF50633_MBCC7_USB_100mA;
+-	else {
++		ma = 100;
++	} else {
+ 		bits = PCF50633_MBCC7_USB_SUSPEND;
+ 		charging_start = 0;
++		ma = 0;
+ 	}
+ 
+ 	ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+@@ -66,7 +72,22 @@
+ 	else
+ 		dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+ 
+-	/* Manual charging start */
++	/*
++	 * We limit the charging current to be the USB current limit.
++	 * The reason is that on pcf50633, when it enters PMU Standby mode,
++	 * which it does when the device goes "off", the USB current limit
++	 * reverts to the variant default.  In at least one common case, that
++	 * default is 500mA.  By setting the charging current to be the same
++	 * as the USB limit we set here before PMU standby, we enforce it only
++	 * using the correct amount of current even when the USB current limit
++	 * gets reset to the wrong thing
++	 */
++
++	mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++	if (mbcc5 > 255)
++		mbcc5 = 255;
++	pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
+ 	mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ 	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+ 
+@@ -81,7 +102,7 @@
+ 				PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
+ 
+ 	mbc->usb_active = charging_start;
+-
++	
+ 	power_supply_changed(&mbc->usb);
+ 
+ 	return ret;
+@@ -156,9 +177,44 @@
+ 
+ static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+ 
++static ssize_t
++show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++	u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
++	unsigned int ma;
++
++	ma = (mbc->pcf->pdata->chg_ref_current_ma *  mbcc5) >> 8;
++
++	return sprintf(buf, "%u\n", ma);
++}
++
++static ssize_t set_chglim(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++	unsigned long ma;
++	unsigned int mbcc5;
++	int ret;
++
++	ret = strict_strtoul(buf, 10, &ma);
++	if (ret)
++		return -EINVAL;
++
++	mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++	if (mbcc5 > 255)
++		mbcc5 = 255;
++	pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
++	return count;
++}
++
++static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
++
+ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
+ 	&dev_attr_chgmode.attr,
+ 	&dev_attr_usb_curlim.attr,
++	&dev_attr_chg_curlim.attr,
+ 	NULL,
+ };
+ 
+@@ -239,6 +295,7 @@
+ 
+ 	power_supply_changed(&mbc->usb);
+ 	power_supply_changed(&mbc->adapter);
++	power_supply_changed(&mbc->ac);
+ 
+ 	if (mbc->pcf->pdata->mbc_event_callback)
+ 		mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+@@ -248,8 +305,7 @@
+ 			enum power_supply_property psp,
+ 			union power_supply_propval *val)
+ {
+-	struct pcf50633_mbc *mbc = container_of(psy,
+-				struct pcf50633_mbc, adapter);
++	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, adapter);
+ 	int ret = 0;
+ 
+ 	switch (psp) {
+@@ -269,10 +325,34 @@
+ {
+ 	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+ 	int ret = 0;
++	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++						PCF50633_MBCC7_USB_MASK;
+ 
+ 	switch (psp) {
+ 	case POWER_SUPPLY_PROP_ONLINE:
+-		val->intval = mbc->usb_online;
++		val->intval = mbc->usb_online &&
++			       	(usblim <= PCF50633_MBCC7_USB_500mA);
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++	return ret;
++}
++
++static int ac_get_property(struct power_supply *psy,
++			enum power_supply_property psp,
++			union power_supply_propval *val)
++{
++	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac);
++	int ret = 0;
++	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++						PCF50633_MBCC7_USB_MASK;
++
++	switch (psp) {
++	case POWER_SUPPLY_PROP_ONLINE:
++		val->intval = mbc->usb_online &&
++			       	(usblim == PCF50633_MBCC7_USB_1000mA);
+ 		break;
+ 	default:
+ 		ret = -EINVAL;
+@@ -337,6 +417,17 @@
+ 	mbc->usb.supplied_to		= mbc->pcf->pdata->batteries;
+ 	mbc->usb.num_supplicants	= mbc->pcf->pdata->num_batteries;
+ 
++	mbc->ac.name			= "ac";
++	mbc->ac.type			= POWER_SUPPLY_TYPE_MAINS;
++	mbc->ac.properties		= power_props;
++	mbc->ac.num_properties		= ARRAY_SIZE(power_props);
++	mbc->ac.get_property		= ac_get_property;
++	mbc->ac.supplied_to		= mbc->pcf->pdata->batteries;
++	mbc->ac.num_supplicants		= mbc->pcf->pdata->num_batteries;
++
++	INIT_DELAYED_WORK(&mbc->charging_restart_work,
++				pcf50633_mbc_charging_restart);
++
+ 	ret = power_supply_register(&pdev->dev, &mbc->adapter);
+ 	if (ret) {
+ 		dev_err(mbc->pcf->dev, "failed to register adapter\n");
+@@ -352,9 +443,15 @@
+ 		return ret;
+ 	}
+ 
+-	INIT_DELAYED_WORK(&mbc->charging_restart_work,
+-				pcf50633_mbc_charging_restart);
+-
++	ret = power_supply_register(&pdev->dev, &mbc->ac);
++	if (ret) {
++		dev_err(mbc->pcf->dev, "failed to register ac\n");
++		power_supply_unregister(&mbc->adapter);
++		power_supply_unregister(&mbc->usb);
++		kfree(mbc);
++		return ret;
++	}
++	
+ 	ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
+ 	if (ret)
+ 		dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
+Index: linux-2.6.30-rc6/drivers/rtc/rtc-pcf50633.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/rtc/rtc-pcf50633.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/rtc/rtc-pcf50633.c	2009-05-18 19:08:33.000000000 +0200
+@@ -58,6 +58,7 @@
+ struct pcf50633_rtc {
+ 	int alarm_enabled;
+ 	int second_enabled;
++	int alarm_pending;
+ 
+ 	struct pcf50633 *pcf;
+ 	struct rtc_device *rtc_dev;
+@@ -70,7 +71,7 @@
+ 	rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
+ 	rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
+ 	rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
+-	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
++	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
+ 	rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
+ }
+ 
+@@ -81,7 +82,7 @@
+ 	pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
+ 	pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
+ 	pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
+-	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
++	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
+ 	pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
+ }
+ 
+@@ -209,6 +210,7 @@
+ 	rtc = dev_get_drvdata(dev);
+ 
+ 	alrm->enabled = rtc->alarm_enabled;
++	alrm->pending = rtc->alarm_pending;
+ 
+ 	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
+ 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+@@ -244,9 +246,12 @@
+ 	/* Returns 0 on success */
+ 	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+ 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
++	if (!alrm->enabled)
++		rtc->alarm_pending = 0;
+ 
+-	if (!alarm_masked)
++	if (!alarm_masked || alrm->enabled)
+ 		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
++	rtc->alarm_enabled = alrm->enabled;
+ 
+ 	return ret;
+ }
+@@ -267,6 +272,7 @@
+ 	switch (irq) {
+ 	case PCF50633_IRQ_ALARM:
+ 		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++		rtc->alarm_pending = 1;
+ 		break;
+ 	case PCF50633_IRQ_SECOND:
+ 		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+Index: linux-2.6.30-rc6/include/linux/mfd/pcf50633/core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/mfd/pcf50633/core.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/mfd/pcf50633/core.h	2009-05-18 19:08:33.000000000 +0200
+@@ -31,6 +31,8 @@
+ 
+ 	int charging_restart_interval;
+ 
++	int chg_ref_current_ma;
++
+ 	/* Callbacks */
+ 	void (*probe_done)(struct pcf50633 *);
+ 	void (*mbc_event_callback)(struct pcf50633 *, int);
+@@ -208,7 +210,8 @@
+ };
+ 
+ /* misc. registers */
+-#define PCF50633_REG_OOCSHDWN	0x0c
++#define PCF50633_REG_OOCSHDWN		0x0c
++#define PCF50633_OOCSHDWN_GOSTDBY 	0x01
+ 
+ /* LED registers */
+ #define PCF50633_REG_LEDOUT 0x28
diff --git a/target/linux/s3c24xx/patches-2.6.30/057-lis302dl.patch b/target/linux/s3c24xx/patches-2.6.30/057-lis302dl.patch
new file mode 100644
index 0000000..df90f5f
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/057-lis302dl.patch
@@ -0,0 +1,29 @@
+Index: linux-2.6.30-rc6/drivers/input/misc/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/misc/Kconfig	2009-05-18 19:07:07.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/misc/Kconfig	2009-05-18 19:08:33.000000000 +0200
+@@ -220,6 +220,15 @@
+ 	  Say Y here if you want to support the built-in real time clock
+ 	  of the HP SDC controller.
+ 
++config INPUT_LIS302DL
++	tristate "STmicro LIS302DL 3-axis accelerometer"
++	depends on SPI_MASTER
++	help
++	  SPI driver for the STmicro LIS302DL 3-axis accelerometer.
++
++	  The userspece interface is a 3-axis (X/Y/Z) relative movement
++	  Linux input device, reporting REL_[XYZ] events.
++
+ config INPUT_PCF50633_PMU
+ 	tristate "PCF50633 PMU events"
+ 	depends on MFD_PCF50633
+Index: linux-2.6.30-rc6/drivers/input/misc/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/input/misc/Makefile	2009-05-18 19:07:07.000000000 +0200
++++ linux-2.6.30-rc6/drivers/input/misc/Makefile	2009-05-18 19:08:33.000000000 +0200
+@@ -25,3 +25,4 @@
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
+ obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
++obj-$(CONFIG_INPUT_LIS302DL)		+= lis302dl.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/060-spi-gpio-non-blocking.patch b/target/linux/s3c24xx/patches-2.6.30/060-spi-gpio-non-blocking.patch
new file mode 100644
index 0000000..ec61f03
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/060-spi-gpio-non-blocking.patch
@@ -0,0 +1,432 @@
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/include/mach/spi-gpio.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/spi-gpio.h	2009-05-18 19:08:34.000000000 +0200
+@@ -21,7 +21,8 @@
+ 	int			 num_chipselect;
+ 	int			 bus_num;
+ 
+-	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
++	int			 non_blocking_transfer;
++	void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs);
+ };
+ 
+ 
+Index: linux-2.6.30-rc6/drivers/spi/spi_bitbang.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/spi/spi_bitbang.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/spi/spi_bitbang.c	2009-05-18 19:08:34.000000000 +0200
+@@ -264,6 +264,123 @@
+  * Drivers can provide word-at-a-time i/o primitives, or provide
+  * transfer-at-a-time ones to leverage dma or fifo hardware.
+  */
++
++/* Synchronous non blocking transfer */ 
++int
++spi_bitbang_transfer_sync(struct spi_device *spi, struct spi_message *m)
++{
++	struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
++	struct spi_transfer *t;
++	unsigned long flags;
++	int cs_change = 1;
++	int status;
++	int nsecs;
++	int (*setup_transfer)(struct spi_device *, struct spi_transfer *);
++
++	/* FIXME this is made-up ... the correct value is known to
++	 * word-at-a-time bitbang code, and presumably chipselect()
++	 * should enforce these requirements too?
++	 */
++	nsecs = 100;
++	cs_change = 1;
++	status = 0;
++	setup_transfer = NULL;
++
++	local_irq_save(flags);
++	list_for_each_entry (t, &m->transfers, transfer_list) {
++		/* override or restore speed and wordsize */
++		if (t->speed_hz || t->bits_per_word) {
++			setup_transfer = bitbang->setup_transfer;
++			if (!setup_transfer) {
++				status = -ENOPROTOOPT;
++				break;
++			}
++		}
++		if (setup_transfer) {
++			status = setup_transfer(spi, t);
++			if (status < 0)
++				break;
++		}
++		
++		/* set up default clock polarity, and activate chip;
++		 * this implicitly updates clock and spi modes as
++		 * previously recorded for this device via setup().
++		 * (and also deselects any other chip that might be
++		 * selected ...)
++		 */
++		
++		if (cs_change) {
++			bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
++			ndelay(nsecs);
++		}
++
++		cs_change = t->cs_change;
++		if (!t->tx_buf && !t->rx_buf && t->len) {
++			status = -EINVAL;
++			break;
++		}
++		
++		/* transfer data.  the lower level code handles any
++		 * new dma mappings it needs. our caller always gave
++		 * us dma-safe buffers.
++		 */
++		if (t->len) {
++			/* REVISIT dma API still needs a designated
++			 * DMA_ADDR_INVALID; ~0 might be better.
++			 */
++			if (!m->is_dma_mapped)
++				t->rx_dma = t->tx_dma = 0;
++			status = bitbang->txrx_bufs(spi, t);
++		}
++
++		if (status > 0)
++			m->actual_length += status;
++		if (status != t->len) {
++			/* always report some kind of error */
++			if (status >= 0)
++				status = -EREMOTEIO;
++			break;
++		}
++		status = 0;
++			/* protocol tweaks before next transfer */
++		if (t->delay_usecs)
++			udelay(t->delay_usecs);
++			if (!cs_change)
++			continue;
++		if (t->transfer_list.next == &m->transfers)
++			break;
++			/* sometimes a short mid-message deselect of the chip
++		 * may be needed to terminate a mode or command
++		 */
++		ndelay(nsecs);
++		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++		ndelay(nsecs);
++	}
++	
++	m->status = status;
++	if (m->complete)
++		m->complete(m->context);
++
++	/* restore speed and wordsize */
++	if (setup_transfer)
++		setup_transfer(spi, NULL);
++
++	/* normally deactivate chipselect ... unless no error and
++	 * cs_change has hinted that the next message will probably
++	 * be for this chip too.
++	 */
++	if (!(status == 0 && cs_change)) {
++		ndelay(nsecs);
++		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++		ndelay(nsecs);
++	}
++
++	local_irq_restore(flags);
++
++	return status;
++}
++EXPORT_SYMBOL_GPL(spi_bitbang_transfer_sync);
++
+ static void bitbang_work(struct work_struct *work)
+ {
+ 	struct spi_bitbang	*bitbang =
+@@ -274,120 +391,13 @@
+ 	bitbang->busy = 1;
+ 	while (!list_empty(&bitbang->queue)) {
+ 		struct spi_message	*m;
+-		struct spi_device	*spi;
+-		unsigned		nsecs;
+-		struct spi_transfer	*t = NULL;
+-		unsigned		tmp;
+-		unsigned		cs_change;
+-		int			status;
+-		int			(*setup_transfer)(struct spi_device *,
+-						struct spi_transfer *);
+ 
+ 		m = container_of(bitbang->queue.next, struct spi_message,
+ 				queue);
+ 		list_del_init(&m->queue);
+-		spin_unlock_irqrestore(&bitbang->lock, flags);
+-
+-		/* FIXME this is made-up ... the correct value is known to
+-		 * word-at-a-time bitbang code, and presumably chipselect()
+-		 * should enforce these requirements too?
+-		 */
+-		nsecs = 100;
+-
+-		spi = m->spi;
+-		tmp = 0;
+-		cs_change = 1;
+-		status = 0;
+-		setup_transfer = NULL;
+-
+-		list_for_each_entry (t, &m->transfers, transfer_list) {
+-
+-			/* override or restore speed and wordsize */
+-			if (t->speed_hz || t->bits_per_word) {
+-				setup_transfer = bitbang->setup_transfer;
+-				if (!setup_transfer) {
+-					status = -ENOPROTOOPT;
+-					break;
+-				}
+-			}
+-			if (setup_transfer) {
+-				status = setup_transfer(spi, t);
+-				if (status < 0)
+-					break;
+-			}
+-
+-			/* set up default clock polarity, and activate chip;
+-			 * this implicitly updates clock and spi modes as
+-			 * previously recorded for this device via setup().
+-			 * (and also deselects any other chip that might be
+-			 * selected ...)
+-			 */
+-			if (cs_change) {
+-				bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+-				ndelay(nsecs);
+-			}
+-			cs_change = t->cs_change;
+-			if (!t->tx_buf && !t->rx_buf && t->len) {
+-				status = -EINVAL;
+-				break;
+-			}
+-
+-			/* transfer data.  the lower level code handles any
+-			 * new dma mappings it needs. our caller always gave
+-			 * us dma-safe buffers.
+-			 */
+-			if (t->len) {
+-				/* REVISIT dma API still needs a designated
+-				 * DMA_ADDR_INVALID; ~0 might be better.
+-				 */
+-				if (!m->is_dma_mapped)
+-					t->rx_dma = t->tx_dma = 0;
+-				status = bitbang->txrx_bufs(spi, t);
+-			}
+-			if (status > 0)
+-				m->actual_length += status;
+-			if (status != t->len) {
+-				/* always report some kind of error */
+-				if (status >= 0)
+-					status = -EREMOTEIO;
+-				break;
+-			}
+-			status = 0;
+-
+-			/* protocol tweaks before next transfer */
+-			if (t->delay_usecs)
+-				udelay(t->delay_usecs);
+-
+-			if (!cs_change)
+-				continue;
+-			if (t->transfer_list.next == &m->transfers)
+-				break;
+-
+-			/* sometimes a short mid-message deselect of the chip
+-			 * may be needed to terminate a mode or command
+-			 */
+-			ndelay(nsecs);
+-			bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+-			ndelay(nsecs);
+-		}
+-
+-		m->status = status;
+-		m->complete(m->context);
+-
+-		/* restore speed and wordsize */
+-		if (setup_transfer)
+-			setup_transfer(spi, NULL);
+-
+-		/* normally deactivate chipselect ... unless no error and
+-		 * cs_change has hinted that the next message will probably
+-		 * be for this chip too.
+-		 */
+-		if (!(status == 0 && cs_change)) {
+-			ndelay(nsecs);
+-			bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+-			ndelay(nsecs);
+-		}
+ 
++		spin_unlock_irqrestore(&bitbang->lock, flags);
++		spi_bitbang_transfer_sync(m->spi, m);
+ 		spin_lock_irqsave(&bitbang->lock, flags);
+ 	}
+ 	bitbang->busy = 0;
+@@ -459,6 +469,9 @@
+ 
+ 	if (!bitbang->master->transfer)
+ 		bitbang->master->transfer = spi_bitbang_transfer;
++	if (!bitbang->master->transfer_sync && bitbang->non_blocking_transfer)
++		bitbang->master->transfer_sync = spi_bitbang_transfer_sync;
++
+ 	if (!bitbang->txrx_bufs) {
+ 		bitbang->use_dma = 0;
+ 		bitbang->txrx_bufs = spi_bitbang_bufs;
+Index: linux-2.6.30-rc6/drivers/spi/spi_s3c24xx_gpio.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/spi/spi_s3c24xx_gpio.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/spi/spi_s3c24xx_gpio.c	2009-05-18 19:08:34.000000000 +0200
+@@ -91,7 +91,7 @@
+ 	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ 
+ 	if (sg->info && sg->info->chip_select)
+-		(sg->info->chip_select)(sg->info, value);
++		(sg->info->chip_select)(sg->info, dev->chip_select, value);
+ }
+ 
+ static int s3c2410_spigpio_probe(struct platform_device *dev)
+@@ -112,14 +112,17 @@
+ 
+ 	platform_set_drvdata(dev, sp);
+ 
+-	/* copy in the plkatform data */
++	/* copy in the platform data */
+ 	info = sp->info = dev->dev.platform_data;
+ 
++	master->num_chipselect = info->num_chipselect;
++
+ 	/* setup spi bitbang adaptor */
+ 	sp->bitbang.master = spi_master_get(master);
+ 	sp->bitbang.master->bus_num = info->bus_num;
+ 	sp->bitbang.master->num_chipselect = info->num_chipselect;
+ 	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
++	sp->bitbang.non_blocking_transfer = info->non_blocking_transfer;
+ 
+ 	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+ 	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+Index: linux-2.6.30-rc6/include/linux/mmc/core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/mmc/core.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/mmc/core.h	2009-05-18 19:08:34.000000000 +0200
+@@ -129,6 +129,8 @@
+ struct mmc_host;
+ struct mmc_card;
+ 
++extern void mmc_flush_scheduled_work(void);
++
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+Index: linux-2.6.30-rc6/include/linux/mmc/sdio_ids.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/mmc/sdio_ids.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/mmc/sdio_ids.h	2009-05-18 19:08:34.000000000 +0200
+@@ -25,5 +25,9 @@
+ 
+ #define SDIO_VENDOR_ID_MARVELL			0x02df
+ #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
++#define SDIO_DEVICE_ID_MARVELL_88W8688		0x9104
++#define SDIO_VENDOR_ID_ATHEROS			0x0271
++#define SDIO_DEVICE_ID_ATHEROS_AR6001		0x0100
++#define SDIO_DEVICE_ID_ATHEROS_AR6002		0x0200
+ 
+ #endif
+Index: linux-2.6.30-rc6/include/linux/spi/spi_bitbang.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/spi/spi_bitbang.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/spi/spi_bitbang.h	2009-05-18 19:08:34.000000000 +0200
+@@ -31,6 +31,9 @@
+ 	u8			use_dma;
+ 	u8			flags;		/* extra spi->mode support */
+ 
++	/* Support for synchronous non blocking transfers */
++	int 			non_blocking_transfer; 
++
+ 	struct spi_master	*master;
+ 
+ 	/* setup_transfer() changes clock and/or wordsize to match settings
+@@ -62,6 +65,8 @@
+ extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ 				      struct spi_transfer *t);
++extern int spi_bitbang_transfer_sync(struct spi_device *spi,
++				      struct spi_message *m);
+ 
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
+Index: linux-2.6.30-rc6/include/linux/spi/spi.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/spi/spi.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/spi/spi.h	2009-05-18 19:08:34.000000000 +0200
+@@ -204,7 +204,6 @@
+  *	SPI slaves, and are numbered from zero to num_chipselects.
+  *	each slave has a chipselect signal, but it's common that not
+  *	every chipselect is connected to a slave.
+- * @dma_alignment: SPI controller constraint on DMA buffers alignment.
+  * @setup: updates the device mode and clocking records used by a
+  *	device's SPI controller; protocol code may call this.  This
+  *	must fail if an unrecognized or unsupported mode is requested.
+@@ -240,17 +239,7 @@
+ 	 */
+ 	u16			num_chipselect;
+ 
+-	/* some SPI controllers pose alignment requirements on DMAable
+-	 * buffers; let protocol drivers know about these requirements.
+-	 */
+-	u16			dma_alignment;
+-
+-	/* Setup mode and clock, etc (spi driver may call many times).
+-	 *
+-	 * IMPORTANT:  this may be called when transfers to another
+-	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
+-	 * which could break those transfers.
+-	 */
++	/* setup mode and clock, etc (spi driver may call many times) */
+ 	int			(*setup)(struct spi_device *spi);
+ 
+ 	/* bidirectional bulk transfers
+@@ -275,6 +264,13 @@
+ 	int			(*transfer)(struct spi_device *spi,
+ 						struct spi_message *mesg);
+ 
++	/* 
++	 * Synchronous non blocking transfer function. Should guarantee
++	 * data availability when it returns 
++	 */
++	int			(*transfer_sync)(struct spi_device *spi,
++						struct spi_message *mesg);
++
+ 	/* called on release() to free memory provided by spi_master */
+ 	void			(*cleanup)(struct spi_device *spi);
+ };
+@@ -584,6 +580,29 @@
+ 	return spi->master->transfer(spi, message);
+ }
+ 
++/**
++ * spi_non_blocking_transfer - Synchronous, non blocking transfer
++ * @spi: device with which data will be exchanged
++ * @message: describes the data transfers with optional completion handlers
++ * Context: any (irqs may be blocked, etc)
++ *
++ * Data is guaranteed to be written or read when this function returns.
++ *
++ * Note : This may not be supported by all spi masters.
++ */
++
++static inline int
++spi_non_blocking_transfer(struct spi_device *spi, struct spi_message *message)
++{
++	if (unlikely(!spi->master->transfer_sync)) {
++		dev_err(&spi->master->dev,
++			       	"non-blocking transfers not supported\n");
++		return -EIO;
++	}
++
++	return spi->master->transfer_sync(spi, message);
++}
++
+ /*---------------------------------------------------------------------------*/
+ 
+ /* All these synchronous SPI transfer routines are utilities layered
diff --git a/target/linux/s3c24xx/patches-2.6.30/068-ar6000.patch b/target/linux/s3c24xx/patches-2.6.30/068-ar6000.patch
new file mode 100644
index 0000000..71357cf
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/068-ar6000.patch
@@ -0,0 +1,25 @@
+Index: linux-2.6.30-rc6/arch/arm/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/Kconfig	2009-05-18 19:08:34.000000000 +0200
+@@ -1401,6 +1401,8 @@
+ 
+ source "drivers/uwb/Kconfig"
+ 
++source "drivers/ar6000/Kconfig"
++
+ source "drivers/mmc/Kconfig"
+ 
+ source "drivers/memstick/Kconfig"
+Index: linux-2.6.30-rc6/drivers/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/Makefile	2009-05-18 19:08:34.000000000 +0200
+@@ -91,6 +91,7 @@
+ obj-y				+= idle/
+ obj-$(CONFIG_MMC)		+= mmc/
+ obj-$(CONFIG_MEMSTICK)		+= memstick/
++obj-$(CONFIG_AR6000_WLAN)	+= ar6000/
+ obj-$(CONFIG_NEW_LEDS)		+= leds/
+ obj-$(CONFIG_INFINIBAND)	+= infiniband/
+ obj-$(CONFIG_SGI_SN)		+= sn/
diff --git a/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch b/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch
new file mode 100644
index 0000000..30e0909
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/070-s3c24xx-time.patch
@@ -0,0 +1,485 @@
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/time.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/time.c	2009-05-18 19:08:34.000000000 +0200
+@@ -0,0 +1,480 @@
++/* linux/arch/arm/plat-s3c24xx/time.c
++ *
++ * Copyright (C) 2003-2005 Simtec Electronics
++ *	Ben Dooks, <ben@simtec.co.uk>
++ *
++ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#include <asm/system.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/map.h>
++#include <asm/plat-s3c/regs-timer.h>
++#include <mach/regs-irq.h>
++#include <asm/mach/time.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++static unsigned long timer_startval;
++static unsigned long timer_usec_ticks;
++static struct work_struct resume_work;
++
++unsigned long pclk;
++struct clk *clk;
++
++#define TIMER_USEC_SHIFT 16
++
++/* we use the shifted arithmetic to work out the ratio of timer ticks
++ * to usecs, as often the peripheral clock is not a nice even multiple
++ * of 1MHz.
++ *
++ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
++ * for the current HZ value of 200 without producing overflows.
++ *
++ * Original patch by Dimitry Andric, updated by Ben Dooks
++*/
++
++
++/* timer_mask_usec_ticks
++ *
++ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
++ * to scale the ticks into usecs
++*/
++
++static inline unsigned long
++timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
++{
++	unsigned long den = pclk / 1000;
++
++	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
++}
++
++/* timer_ticks_to_usec
++ *
++ * convert timer ticks to usec.
++*/
++
++static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
++{
++	unsigned long res;
++
++	res = ticks * timer_usec_ticks;
++	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
++
++	return res >> TIMER_USEC_SHIFT;
++}
++
++/***
++ * Returns microsecond  since last clock interrupt.  Note that interrupts
++ * will have been disabled by do_gettimeoffset()
++ * IRQs are disabled before entering here from do_gettimeofday()
++ */
++
++#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
++
++unsigned long s3c2410_gettimeoffset (void)
++{
++	unsigned long tdone;
++	unsigned long irqpend;
++	unsigned long tval;
++
++	/* work out how many ticks have gone since last timer interrupt */
++
++        tval =  __raw_readl(S3C2410_TCNTO(4));
++	tdone = timer_startval - tval;
++
++	/* check to see if there is an interrupt pending */
++
++	irqpend = __raw_readl(S3C2410_SRCPND);
++	if (irqpend & SRCPND_TIMER4) {
++		/* re-read the timer, and try and fix up for the missed
++		 * interrupt. Note, the interrupt may go off before the
++		 * timer has re-loaded from wrapping.
++		 */
++
++		tval =  __raw_readl(S3C2410_TCNTO(4));
++		tdone = timer_startval - tval;
++
++		if (tval != 0)
++			tdone += timer_startval;
++	}
++
++	return timer_ticks_to_usec(tdone);
++}
++
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t
++s3c2410_timer_interrupt(int irq, void *dev_id)
++{
++	timer_tick();
++	return IRQ_HANDLED;
++}
++
++static struct irqaction s3c2410_timer_irq = {
++	.name		= "S3C2410 Timer Tick",
++	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++	.handler	= s3c2410_timer_interrupt,
++};
++
++#define use_tclk1_12() ( \
++	machine_is_bast()	|| \
++	machine_is_vr1000()	|| \
++	machine_is_anubis()	|| \
++	machine_is_osiris() )
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ *
++ * Currently we only use timer4, as it is the only timer which has no
++ * other function that can be exploited externally
++ */
++static void s3c2410_timer_setup (void)
++{
++	unsigned long tcon;
++	unsigned long tcnt;
++	unsigned long tcfg1;
++	unsigned long tcfg0;
++
++	tcnt = 0xffff;  /* default value for tcnt */
++
++	/* read the current timer configuration bits */
++
++	tcon = __raw_readl(S3C2410_TCON);
++	tcfg1 = __raw_readl(S3C2410_TCFG1);
++	tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++	/* configure the system for whichever machine is in use */
++
++	if (use_tclk1_12()) {
++		/* timer is at 12MHz, scaler is 1 */
++		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
++		tcnt = 12000000 / HZ;
++
++		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
++	} else {
++		/* since values around 50 to
++		 * 70MHz are not values we can directly generate the timer
++		 * value from, we need to pre-scale and divide before using it.
++		 *
++		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
++		 * (8.45 ticks per usec)
++		 */
++
++		/* configure clock tick */
++		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
++		printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
++
++		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++		tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
++
++		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
++
++		tcnt = (pclk / 6) / HZ;
++	}
++
++	/* timers reload after counting zero, so reduce the count by 1 */
++
++	tcnt--;
++
++	printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
++	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
++
++	/* check to see if timer is within 16bit range... */
++	if (tcnt > 0xffff) {
++		panic("setup_timer: HZ is too small, cannot configure timer!");
++		return;
++	}
++
++	__raw_writel(tcfg1, S3C2410_TCFG1);
++	__raw_writel(tcfg0, S3C2410_TCFG0);
++
++	timer_startval = tcnt;
++	__raw_writel(tcnt, S3C2410_TCNTB(4));
++
++	/* ensure timer is stopped... */
++
++	tcon &= ~(7<<20);
++	tcon |= S3C2410_TCON_T4RELOAD;
++	tcon |= S3C2410_TCON_T4MANUALUPD;
++
++	__raw_writel(tcon, S3C2410_TCON);
++	__raw_writel(tcnt, S3C2410_TCNTB(4));
++	__raw_writel(tcnt, S3C2410_TCMPB(4));
++
++	/* start the timer running */
++	tcon |= S3C2410_TCON_T4START;
++	tcon &= ~S3C2410_TCON_T4MANUALUPD;
++	__raw_writel(tcon, S3C2410_TCON);
++
++	__raw_writel(__raw_readl(S3C2410_INTMSK) & (~(1UL << 14)),
++		     S3C2410_INTMSK);
++
++}
++
++struct sys_timer s3c24xx_timer;
++static void timer_resume_work(struct work_struct *work)
++{
++	clk_enable(clk);
++
++#ifdef CONFIG_NO_IDLE_HZ
++	if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
++		s3c24xx_timer.dyn_tick->enable();
++	else
++#endif
++		s3c2410_timer_setup();
++}
++
++static void __init s3c2410_timer_init (void)
++{
++	if (!use_tclk1_12()) {
++		/* for the h1940 (and others), we use the pclk from the core
++		 * to generate the timer values.
++		 */
++
++		/* this is used as default if no other timer can be found */
++		clk = clk_get(NULL, "timers");
++		if (IS_ERR(clk))
++			panic("failed to get clock for system timer");
++
++		clk_enable(clk);
++
++		pclk = clk_get_rate(clk);
++		printk("pclk = %lu\n", pclk);
++	}
++
++	INIT_WORK(&resume_work, timer_resume_work);
++	s3c2410_timer_setup();
++	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
++}
++
++static void s3c2410_timer_resume_work(struct work_struct *work)
++{
++	s3c2410_timer_setup();
++}
++
++static void s3c2410_timer_resume(void)
++{
++	static DECLARE_WORK(work, s3c2410_timer_resume_work);
++	int res;
++
++	res = schedule_work(&work);
++	if (!res)
++		printk(KERN_ERR
++		    "s3c2410_timer_resume_work already queued ???\n");
++}
++
++#ifdef CONFIG_NO_IDLE_HZ
++/*
++ * We'll set a constant prescaler so we don't have to bother setting it
++ * when reprogramming and so that we avoid costly divisions.
++ *
++ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
++ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
++ */
++#define INPUT_FREQ_SHIFT	9
++
++static int ticks_last;
++static int ticks_left;
++static uint32_t tcnto_last;
++
++static inline int s3c24xx_timer_read(void)
++{
++	uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
++
++	/*
++	 * WARNING: sometimes we get called before TCNTB has been
++	 * loaded into the counter and TCNTO then returns its previous
++	 * value and kill us, so don't do anything before counter is
++	 * reloaded.
++	 */
++	if (unlikely(tcnto == tcnto_last))
++		return ticks_last;
++
++	tcnto_last = -1;
++	return tcnto <<
++		((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
++}
++
++static inline void s3c24xx_timer_program(int ticks)
++{
++	uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
++	uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
++
++	/* Just make sure the timer is stopped.  */
++	__raw_writel(tcon, S3C2410_TCON);
++
++	/* TODO: add likely()ies / unlikely()ies */
++	if (ticks >> 18) {
++		ticks_last = min(ticks, 0xffff << 3);
++		ticks_left = ticks - ticks_last;
++		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
++		__raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
++	} else if (ticks >> 17) {
++		ticks_last = ticks;
++		ticks_left = 0;
++		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
++		__raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
++	} else if (ticks >> 16) {
++		ticks_last = ticks;
++		ticks_left = 0;
++		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
++		__raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
++	} else {
++		ticks_last = ticks;
++		ticks_left = 0;
++		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
++		__raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
++	}
++
++	tcnto_last = __raw_readl(S3C2410_TCNTO(4));
++	__raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
++			S3C2410_TCON);
++	__raw_writel(tcon | S3C2410_TCON_T4START,
++			S3C2410_TCON);
++}
++
++/*
++ * If we have already waited all the time we were supposed to wait,
++ * kick the timer, setting the longest allowed timeout value just
++ * for time-keeping.
++ */
++static inline void s3c24xx_timer_program_idle(void)
++{
++	s3c24xx_timer_program(0xffff << 3);
++}
++
++static inline void s3c24xx_timer_update(int restart)
++{
++	int ticks_cur = s3c24xx_timer_read();
++	int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
++	int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
++
++	if (restart) {
++		if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
++			s3c24xx_timer_program(ticks_left);
++		else
++			s3c24xx_timer_program_idle();
++		ticks_last += subjiffy;
++	} else
++		ticks_last = subjiffy;
++
++	while (jiffies_elapsed --)
++		timer_tick();
++}
++
++/* Called when the timer expires.  */
++static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
++{
++	tcnto_last = -1;
++	s3c24xx_timer_update(1);
++
++	return IRQ_HANDLED;
++}
++
++/* Called to update jiffies with time elapsed.  */
++static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
++{
++	s3c24xx_timer_update(0);
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * Programs the next timer interrupt needed.  Called when dynamic tick is
++ * enabled, and to reprogram the ticks to skip from pm_idle.  The CPU goes
++ * to sleep directly after this.
++ */
++static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
++{
++	int subjiffy_left = ticks_last - s3c24xx_timer_read();
++
++	s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
++	ticks_last += subjiffy_left;
++}
++
++static unsigned long s3c24xx_timer_offset_dyn_tick(void)
++{
++	/* TODO */
++	return 0;
++}
++
++static int s3c24xx_timer_enable_dyn_tick(void)
++{
++	/* Set our constant prescaler.  */
++	uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
++	int prescaler =
++		max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
++
++	tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++	tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
++	__raw_writel(tcfg0, S3C2410_TCFG0);
++
++	/* Override handlers.  */
++	s3c2410_timer_irq.handler = s3c24xx_timer_handler;
++	s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
++
++	printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
++			"%li Hz pclk with prescaler %i\n", pclk, prescaler);
++
++	s3c24xx_timer_program_idle();
++
++	return 0;
++}
++
++static int s3c24xx_timer_disable_dyn_tick(void)
++{
++	s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
++	s3c24xx_timer.offset = s3c2410_gettimeoffset;
++	s3c2410_timer_setup();
++
++	return 0;
++}
++
++static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
++	.enable		= s3c24xx_timer_enable_dyn_tick,
++	.disable	= s3c24xx_timer_disable_dyn_tick,
++	.reprogram	= s3c24xx_timer_reprogram_dyn_tick,
++	.handler	= s3c24xx_timer_handler_dyn_tick,
++};
++#endif	/* CONFIG_NO_IDLE_HZ */
++
++struct sys_timer s3c24xx_timer = {
++	.init		= s3c2410_timer_init,
++	.offset		= s3c2410_gettimeoffset,
++	.resume		= s3c2410_timer_resume,
++#ifdef CONFIG_NO_IDLE_HZ
++	.dyn_tick	= &s3c24xx_dyn_tick_timer,
++#endif
++};
diff --git a/target/linux/s3c24xx/patches-2.6.30/080-nr-tty-devices.patch b/target/linux/s3c24xx/patches-2.6.30/080-nr-tty-devices.patch
new file mode 100644
index 0000000..3c3bc79
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/080-nr-tty-devices.patch
@@ -0,0 +1,47 @@
+Index: linux-2.6.30-rc6/include/linux/vt.h
+===================================================================
+--- linux-2.6.30-rc6.orig/include/linux/vt.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/include/linux/vt.h	2009-05-18 19:08:35.000000000 +0200
+@@ -18,8 +18,19 @@
+  * resizing).
+  */
+ #define MIN_NR_CONSOLES 1       /* must be at least 1 */
++#if (CONFIG_NR_TTY_DEVICES < 4)
++/* Lower Limit */
++#define MAX_NR_CONSOLES	4	/* serial lines start at 64 */
++#define MAX_NR_USER_CONSOLES 4	/* must be root to allocate above this */
++#elif (CONFIG_NR_TTY_DEVICES > 63)
++/* Upper Limit */
+ #define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+ #define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
++#else
++/* They chose a sensible number */
++#define MAX_NR_CONSOLES CONFIG_NR_TTY_DEVICES
++#define MAX_NR_USER_CONSOLES CONFIG_NR_TTY_DEVICES
++#endif
+ 		/* Note: the ioctl VT_GETSTATE does not work for
+ 		   consoles 16 and higher (since it returns a short) */
+ 
+Index: linux-2.6.30-rc6/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/char/Kconfig	2009-05-18 19:07:07.000000000 +0200
++++ linux-2.6.30-rc6/drivers/char/Kconfig	2009-05-18 19:08:35.000000000 +0200
+@@ -66,6 +66,18 @@
+ 
+ 	  If unsure, say Y.
+ 
++config NR_TTY_DEVICES
++	int "Maximum tty device number"
++	depends on VT
++	default 63
++	---help---
++	  This is the highest numbered device created in /dev. You will actually have
++	  NR_TTY_DEVICES+1 devices in /dev. The default is 63, which will result in
++	  64 /dev entries. The lowest number you can set is 11, anything below that, 
++	  and it will default to 11. 63 is also the upper limit so we don't overrun
++	  the serial consoles.
++
++
+ config HW_CONSOLE
+ 	bool
+ 	depends on VT && !S390 && !UML
diff --git a/target/linux/s3c24xx/patches-2.6.30/090-sound.patch b/target/linux/s3c24xx/patches-2.6.30/090-sound.patch
new file mode 100644
index 0000000..ff86a29
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/090-sound.patch
@@ -0,0 +1,150 @@
+Index: linux-2.6.30-rc6/sound/soc/s3c24xx/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/sound/soc/s3c24xx/Kconfig	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/sound/soc/s3c24xx/Kconfig	2009-05-18 19:08:35.000000000 +0200
+@@ -42,10 +42,20 @@
+ 	tristate "SoC I2S Audio support for Jive"
+ 	depends on SND_S3C24XX_SOC && MACH_JIVE
+ 	select SND_SOC_WM8750
++	select SND_SOC_WM8750_SPI
+ 	select SND_S3C2412_SOC_I2S
+ 	help
+ 	  Sat Y if you want to add support for SoC audio on the Jive.
+ 
++config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
++	tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
++	depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
++	select SND_S3C24XX_SOC_I2S
++	select SND_SOC_WM8753
++	help
++	  Say Y if you want to add support for SoC audio on Openmoko Freerunner
++	  with the WM8753 codec
++
+ config SND_S3C24XX_SOC_SMDK2443_WM9710
+ 	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+ 	depends on SND_S3C24XX_SOC && MACH_SMDK2443
+Index: linux-2.6.30-rc6/sound/soc/s3c24xx/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/sound/soc/s3c24xx/Makefile	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/sound/soc/s3c24xx/Makefile	2009-05-18 19:08:35.000000000 +0200
+@@ -19,9 +19,11 @@
+ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+ snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
++snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
+ 
+ obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
++obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
+Index: linux-2.6.30-rc6/sound/soc/s3c24xx/s3c24xx-i2s.c
+===================================================================
+--- linux-2.6.30-rc6.orig/sound/soc/s3c24xx/s3c24xx-i2s.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/sound/soc/s3c24xx/s3c24xx-i2s.c	2009-05-18 19:08:35.000000000 +0200
+@@ -284,11 +284,14 @@
+ 	case SNDRV_PCM_TRIGGER_START:
+ 	case SNDRV_PCM_TRIGGER_RESUME:
+ 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+-		if (!s3c24xx_snd_is_clkmaster()) {
+-			ret = s3c24xx_snd_lrsync();
+-			if (ret)
+-				goto exit_err;
+-		}
++		if (!s3c24xx_snd_is_clkmaster())
++			/* we ignore the return code, if it sync'd then fine,
++			 * if it didn't sync, which happens after resume the
++			 * first time when there was a live stream at suspend,
++			 * just let it timeout, the stream picks up OK after
++			 * that and LRCK is evidently working again.
++			 */
++			s3c24xx_snd_lrsync();
+ 
+ 		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ 			s3c24xx_snd_rxctrl(1);
+@@ -308,7 +311,6 @@
+ 		break;
+ 	}
+ 
+-exit_err:
+ 	return ret;
+ }
+ 
+Index: linux-2.6.30-rc6/sound/soc/s3c24xx/s3c24xx-pcm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/sound/soc/s3c24xx/s3c24xx-pcm.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/sound/soc/s3c24xx/s3c24xx-pcm.c	2009-05-18 19:08:35.000000000 +0200
+@@ -75,11 +75,18 @@
+ {
+ 	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+ 	dma_addr_t pos = prtd->dma_pos;
++	unsigned int limit;
+ 	int ret;
+ 
+ 	pr_debug("Entered %s\n", __func__);
+ 
+-	while (prtd->dma_loaded < prtd->dma_limit) {
++	if (s3c_dma_has_circular()) {
++		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
++	} else
++		limit = prtd->dma_limit;
++
++
++	while (prtd->dma_loaded < limit) {
+ 		unsigned long len = prtd->dma_period;
+ 
+ 		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
+@@ -123,7 +130,7 @@
+ 		snd_pcm_period_elapsed(substream);
+ 
+ 	spin_lock(&prtd->lock);
+-	if (prtd->state & ST_RUNNING) {
++	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
+ 		prtd->dma_loaded--;
+ 		s3c24xx_pcm_enqueue(substream);
+ 	}
+@@ -164,6 +171,11 @@
+ 			printk(KERN_ERR "failed to get dma channel\n");
+ 			return ret;
+ 		}
++
++		/* use the circular buffering if we have it available. */
++		if (s3c_dma_has_circular())
++			s3c2410_dma_setflags(prtd->params->channel,
++					     S3C2410_DMAF_CIRCULAR);
+ 	}
+ 
+ 	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+@@ -218,24 +230,17 @@
+ 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
+ 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ 		s3c2410_dma_devconfig(prtd->params->channel,
+-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
+-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
+-
+-		s3c2410_dma_config(prtd->params->channel,
+-				prtd->params->dma_size,
+-				S3C2410_DCON_SYNC_PCLK |
+-				S3C2410_DCON_HANDSHAKE);
++				      S3C2410_DMASRC_MEM,
++				      prtd->params->dma_addr);
+ 	} else {
+-		s3c2410_dma_config(prtd->params->channel,
+-				prtd->params->dma_size,
+-				S3C2410_DCON_HANDSHAKE |
+-				S3C2410_DCON_SYNC_PCLK);
+-
+ 		s3c2410_dma_devconfig(prtd->params->channel,
+-					S3C2410_DMASRC_HW, 0x3,
+-					prtd->params->dma_addr);
++				      S3C2410_DMASRC_HW,
++				      prtd->params->dma_addr);
+ 	}
+ 
++	s3c2410_dma_config(prtd->params->channel,
++			   prtd->params->dma_size);
++
+ 	/* flush the DMA channel */
+ 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+ 	prtd->dma_loaded = 0;
diff --git a/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch b/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch
new file mode 100644
index 0000000..5fe1c2e
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch
@@ -0,0 +1,230 @@
+Index: linux-2.6.30-rc6/drivers/usb/gadget/s3c2410_udc.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/usb/gadget/s3c2410_udc.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/usb/gadget/s3c2410_udc.c	2009-05-18 19:08:35.000000000 +0200
+@@ -74,6 +74,7 @@
+ static u64			rsrc_start;
+ static u64			rsrc_len;
+ static struct dentry		*s3c2410_udc_debugfs_root;
++static struct timer_list	vbus_poll_timer;
+ 
+ static inline u32 udc_read(u32 reg)
+ {
+@@ -134,6 +135,8 @@
+ 	return 0;
+ }
+ #endif
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
+ {
+ 	u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
+@@ -197,6 +200,7 @@
+ 	.release	= single_release,
+ 	.owner		= THIS_MODULE,
+ };
++#endif
+ 
+ /* io macros */
+ 
+@@ -843,6 +847,7 @@
+ 	u32			ep_csr1;
+ 	u32			idx;
+ 
++handle_ep_again:
+ 	if (likely (!list_empty(&ep->queue)))
+ 		req = list_entry(ep->queue.next,
+ 				struct s3c2410_request, queue);
+@@ -882,6 +887,8 @@
+ 
+ 		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
+ 			s3c2410_udc_read_fifo(ep,req);
++			if (s3c2410_udc_fifo_count_out())
++				goto handle_ep_again;
+ 		}
+ 	}
+ }
+@@ -1520,6 +1527,20 @@
+ 	return IRQ_HANDLED;
+ }
+ 
++static void s3c2410_udc_vbus_poll(unsigned long _data)
++{
++	struct s3c2410_udc	*data = (struct s3c2410_udc *)_data;
++	int			v;
++
++	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
++	if (udc_info && udc_info->get_vbus_status) {
++		v = udc_info->get_vbus_status();
++		if ((v > -1) && (v != data->vbus))
++			s3c2410_udc_vbus_session(&data->gadget, v);
++		mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(900));
++	}
++}
++
+ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
+ {
+ 	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+@@ -1677,6 +1698,11 @@
+ 		goto register_error;
+ 	}
+ 
++	if (udc_info && udc_info->get_vbus_status && !udc_info->vbus_pin) {
++		mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(50));
++		return 0; /* just return, vbus change will enable udc */
++	}
++
+ 	/* Enable udc */
+ 	s3c2410_udc_enable(udc);
+ 
+@@ -1707,6 +1733,7 @@
+ 	if (driver->disconnect)
+ 		driver->disconnect(&udc->gadget);
+ 
++	driver->unbind(&udc->gadget);
+ 	device_del(&udc->gadget.dev);
+ 	udc->driver = NULL;
+ 
+@@ -1893,10 +1920,16 @@
+ 		}
+ 
+ 		dev_dbg(dev, "got irq %i\n", irq);
++	} else if (udc_info && udc_info->get_vbus_status) {
++		udc->vbus = 0;
++		init_timer(&vbus_poll_timer);
++		vbus_poll_timer.function = s3c2410_udc_vbus_poll;
++		vbus_poll_timer.data = (unsigned long) udc;
+ 	} else {
+ 		udc->vbus = 1;
+ 	}
+ 
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ 	if (s3c2410_udc_debugfs_root) {
+ 		udc->regs_info = debugfs_create_file("registers", S_IRUGO,
+ 				s3c2410_udc_debugfs_root,
+@@ -1904,6 +1937,7 @@
+ 		if (!udc->regs_info)
+ 			dev_warn(dev, "debugfs file creation failed\n");
+ 	}
++#endif
+ 
+ 	dev_dbg(dev, "probe ok\n");
+ 
+@@ -1939,6 +1973,8 @@
+ 	if (udc_info && udc_info->vbus_pin > 0) {
+ 		irq = gpio_to_irq(udc_info->vbus_pin);
+ 		free_irq(irq, udc);
++	} else if (udc_info && udc_info->get_vbus_status) {
++		del_timer_sync(&vbus_poll_timer);
+ 	}
+ 
+ 	free_irq(IRQ_USBD, udc);
+@@ -2013,12 +2049,14 @@
+ 
+ 	dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
+ 
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ 	s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
+ 	if (IS_ERR(s3c2410_udc_debugfs_root)) {
+ 		printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
+ 			gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
+ 		s3c2410_udc_debugfs_root = NULL;
+ 	}
++#endif
+ 
+ 	retval = platform_driver_register(&udc_driver_2410);
+ 	if (retval)
+Index: linux-2.6.30-rc6/drivers/usb/host/ohci-s3c2410.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/usb/host/ohci-s3c2410.c	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/usb/host/ohci-s3c2410.c	2009-05-18 19:08:35.000000000 +0200
+@@ -21,6 +21,8 @@
+ 
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
++#include <mach/hardware.h>
++#include <mach/regs-gpio.h>
+ #include <plat/usb-control.h>
+ 
+ #define valid_port(idx) ((idx) == 1 || (idx) == 2)
+@@ -306,6 +308,42 @@
+ 	local_irq_restore(flags);
+ }
+ 
++/* switching of USB pads */
++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
++			     char *buf)
++{
++	if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
++		return sprintf(buf, "host\n");
++
++	return sprintf(buf, "device\n");
++}
++
++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
++			    const char *buf, size_t count)
++{
++	if (!strncmp(buf, "host", 4)) {
++		printk(KERN_WARNING "s3c2410: changing usb to host\n");
++		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
++				      S3C2410_MISCCR_USBHOST);
++		/* FIXME:
++		 * - call machine-specific disable-pullup function i
++		 * - enable +Vbus (if hardware supports it)
++		 */
++		s3c2410_gpio_setpin(S3C2410_GPB9, 0);
++	} else if (!strncmp(buf, "device", 6)) {
++		printk(KERN_WARNING "s3c2410: changing usb to device\n");
++		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
++		s3c2410_gpio_setpin(S3C2410_GPB9, 1);
++	} else {
++		printk(KERN_WARNING "s3c2410: unknown mode\n");
++		return -EINVAL;
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
++
+ /* may be called without controller electrically present */
+ /* may be called with controller, bus, and devices active */
+ 
+@@ -486,15 +524,23 @@
+ 	return 0;
+ }
+ 
++static int ohci_hcd_s3c2410_drv_resume(struct platform_device *pdev)
++{
++	struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++	ohci_finish_controller_resume(hcd);
++	return 0;
++}
++
+ static struct platform_driver ohci_hcd_s3c2410_driver = {
+ 	.probe		= ohci_hcd_s3c2410_drv_probe,
+ 	.remove		= ohci_hcd_s3c2410_drv_remove,
+ 	.shutdown	= usb_hcd_platform_shutdown,
+ 	/*.suspend	= ohci_hcd_s3c2410_drv_suspend, */
+-	/*.resume	= ohci_hcd_s3c2410_drv_resume, */
++	.resume		= ohci_hcd_s3c2410_drv_resume,
+ 	.driver		= {
+ 		.owner	= THIS_MODULE,
+-		.name	= "s3c2410-ohci",
++		.name	= "s3c-ohci",
+ 	},
+ };
+ 
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/udc.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/udc.h	2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/udc.h	2009-05-18 19:08:35.000000000 +0200
+@@ -27,6 +27,7 @@
+ struct s3c2410_udc_mach_info {
+ 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+  	void	(*vbus_draw)(unsigned int ma);
++	int	(*get_vbus_status)(void);
+ 	unsigned int vbus_pin;
+ 	unsigned char vbus_pin_inverted;
+ };