add support for target 3c24xx (more known as Openmoko GTA02 "Freerunner") and merge it with the openmoko-target and the work Michael Buesch <mb> did

SVN-Revision: 13609

1 files changed, 204 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches/0159-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch b/target/linux/s3c24xx/patches/0159-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch
new file mode 100755
index 0000000..e7fc674
--- /dev/null
+++ b/target/linux/s3c24xx/patches/0159-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch
@@ -0,0 +1,204 @@
+From 286581f7a1cd2536b70cc0cfbc742ee45260252e Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Fri, 25 Jul 2008 23:06:12 +0100
+Subject: [PATCH] fix-pcf50633-suspend-resume-onehit-i2c-other-meddling.patch
+
+ - speed up suspend and resume by using one hit i2c bulk transactions
+ - don't bother storing int mask set on suspend, the default one is
+   what we use anyway
+ - put stack_trace() on pcf50633 low level access that fire if we
+   try to touch them before we resumed
+ - cosmetic source cleanup
+ - reduces resume time for pcf50633 from 450ms to 255ms
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ arch/arm/mach-s3c2440/mach-gta02.c |   21 ++-------
+ drivers/i2c/chips/pcf50633.c       |   83 +++++++++++++++++++----------------
+ 2 files changed, 49 insertions(+), 55 deletions(-)
+
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index 9ba1036..22de181 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -477,24 +477,11 @@ static struct pcf50633_platform_data gta02_pcf_pdata = {
+ 	.r_fix_batt_par	= 10000,
+ 	.r_sense_milli	= 220,
+ 	.resumers = {
+-		[0] = /* PCF50633_INT1_ADPINS 	| */
+-		  /* PCF50633_INT1_ADPREM	| */
+-		  PCF50633_INT1_USBINS		|
+-		  PCF50633_INT1_USBREM		|
+-		  PCF50633_INT1_ALARM,
++		[0] = PCF50633_INT1_USBINS |
++		      PCF50633_INT1_USBREM |
++		      PCF50633_INT1_ALARM,
+ 		[1] = PCF50633_INT2_ONKEYF,
+-		[2] =  /* PCF50633_INT3_BATFULL	| */
+-		  /* PCF50633_INT3_CHGHALT	| */
+-		  /* PCF50633_INT3_THLIMON	| */
+-		  /* PCF50633_INT3_THLIMOFF	| */
+-		  /* PCF50633_INT3_USBLIMON	| */
+-		  /* PCF50633_INT3_USBLIMOFF	| */
+-		  PCF50633_INT3_ONKEY1S ,
+-		[3] = 0				/* |
+-		     PCF50633_INT4_LOWSYS	| */
+-		  /* PCF50633_INT4_LOWBAT	| */
+-		  /* PCF50633_INT4_HIGHTMP */,
+-		[4] = 0
++		[2] = PCF50633_INT3_ONKEY1S
+ 	},
+ 	.rails	= {
+ 		[PCF50633_REGULATOR_AUTO] = {
+diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
+index f6886d7..c148ea7 100644
+--- a/drivers/i2c/chips/pcf50633.c
++++ b/drivers/i2c/chips/pcf50633.c
+@@ -163,10 +163,7 @@ struct pcf50633_data {
+ 		u_int8_t down2out, down2ena;
+ 		u_int8_t memldoout, memldoena;
+ 		u_int8_t ledout, ledena, leddim;
+-		struct {
+-			u_int8_t out;
+-			u_int8_t ena;
+-		} ldo[__NUM_PCF50633_REGS];
++		u_int8_t ldo[__NUM_PCF50633_REGS][2];
+ 	} standby_regs;
+ 
+ 	struct resume_dependency resume_dependency;
+@@ -187,6 +184,10 @@ static struct platform_device *pcf50633_pdev;
+ 
+ static int __reg_write(struct pcf50633_data *pcf, u_int8_t reg, u_int8_t val)
+ {
++	if (pcf->have_been_suspended == 1) {
++		dev_err(&pcf->client.dev, "__reg_write while suspended\n");
++		dump_stack();
++	}
+ 	return i2c_smbus_write_byte_data(&pcf->client, reg, val);
+ }
+ 
+@@ -205,6 +206,10 @@ static int32_t __reg_read(struct pcf50633_data *pcf, u_int8_t reg)
+ {
+ 	int32_t ret;
+ 
++	if (pcf->have_been_suspended == 1) {
++		dev_err(&pcf->client.dev, "__reg_read while suspended\n");
++		dump_stack();
++	}
+ 	ret = i2c_smbus_read_byte_data(&pcf->client, reg);
+ 
+ 	return ret;
+@@ -2155,6 +2160,13 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
+ 	struct i2c_client *client = to_i2c_client(dev);
+ 	struct pcf50633_data *pcf = i2c_get_clientdata(client);
+ 	int i;
++	int ret;
++	u_int8_t tmp;
++
++	/* we suspend once (!) as late as possible in the suspend sequencing */
++
++	if ((state.event != PM_EVENT_SUSPEND) || (pcf->have_been_suspended))
++		return 0;
+ 
+ 	/* The general idea is to power down all unused power supplies,
+ 	 * and then mask all PCF50606 interrup sources but EXTONR, ONKEYF
+@@ -2176,25 +2188,25 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
+ 	pcf->standby_regs.ledout = __reg_read(pcf, PCF50633_REG_LEDOUT);
+ 	pcf->standby_regs.ledena = __reg_read(pcf, PCF50633_REG_LEDENA);
+ 	pcf->standby_regs.leddim = __reg_read(pcf, PCF50633_REG_LEDDIM);
+-	/* FIXME: one big read? */
+-	for (i = 0; i < 7; i++) {
+-		u_int8_t reg_out = PCF50633_REG_LDO1OUT + 2*i;
+-		pcf->standby_regs.ldo[i].out = __reg_read(pcf, reg_out);
+-		pcf->standby_regs.ldo[i].ena = __reg_read(pcf, reg_out+1);
+-	}
++
++	/* regulator voltages and enable states */
++	ret = i2c_smbus_read_i2c_block_data(&pcf->client,
++					    PCF50633_REG_LDO1OUT, 14,
++					    &pcf->standby_regs.ldo[0][0]);
++	if (ret != 14)
++		dev_err(dev, "Failed to save LDO levels and enables :-(\n");
+ 
+ 	/* switch off power supplies that are not needed during suspend */
+ 	for (i = 0; i < __NUM_PCF50633_REGULATORS; i++) {
+-		if (!(pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON)) {
+-			u_int8_t tmp;
+-
+-			DEBUGP("disabling pcf50633 regulator %u\n", i);
+-			/* we cannot use pcf50633_onoff_set() because we're
+-			 * already under the mutex */
+-			tmp = __reg_read(pcf, regulator_registers[i]+1);
+-			tmp &= 0xfe;
+-			__reg_write(pcf, regulator_registers[i]+1, tmp);
+-		}
++		if ((pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON))
++			continue;
++
++		dev_dbg(dev, "disabling regulator %u\n", i);
++		/* we cannot use pcf50633_onoff_set() because we're
++		 * already under the mutex */
++		tmp = __reg_read(pcf, regulator_registers[i]+1);
++		tmp &= 0xfe;
++		__reg_write(pcf, regulator_registers[i]+1, tmp);
+ 	}
+ 
+ 	/* turn off the backlight */
+@@ -2202,11 +2214,9 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
+ 	__reg_write(pcf, PCF50633_REG_LEDOUT, 2);
+ 	__reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
+ 
+-	pcf->standby_regs.int1m = __reg_read(pcf, PCF50633_REG_INT1M);
+-	pcf->standby_regs.int2m = __reg_read(pcf, PCF50633_REG_INT2M);
+-	pcf->standby_regs.int3m = __reg_read(pcf, PCF50633_REG_INT3M);
+-	pcf->standby_regs.int4m = __reg_read(pcf, PCF50633_REG_INT4M);
+-	pcf->standby_regs.int5m = __reg_read(pcf, PCF50633_REG_INT5M);
++	/* set interrupt masks so only those sources we want to wake
++	 * us are able to
++	 */
+ 	__reg_write(pcf, PCF50633_REG_INT1M, ~pcf->pdata->resumers[0]);
+ 	__reg_write(pcf, PCF50633_REG_INT2M, ~pcf->pdata->resumers[1]);
+ 	__reg_write(pcf, PCF50633_REG_INT3M, ~pcf->pdata->resumers[2]);
+@@ -2240,16 +2250,13 @@ static int pcf50633_resume(struct device *dev)
+ {
+ 	struct i2c_client *client = to_i2c_client(dev);
+ 	struct pcf50633_data *pcf = i2c_get_clientdata(client);
+-	int i;
++	int ret;
+ 
+ 	mutex_lock(&pcf->lock);
+ 
+-	/* Resume all saved registers that don't "survive" standby state */
+-	__reg_write(pcf, PCF50633_REG_INT1M, pcf->standby_regs.int1m);
+-	__reg_write(pcf, PCF50633_REG_INT2M, pcf->standby_regs.int2m);
+-	__reg_write(pcf, PCF50633_REG_INT3M, pcf->standby_regs.int3m);
+-	__reg_write(pcf, PCF50633_REG_INT4M, pcf->standby_regs.int4m);
+-	__reg_write(pcf, PCF50633_REG_INT5M, pcf->standby_regs.int5m);
++	pcf->have_been_suspended = 2; /* resuming */
++
++	/* these guys get reset while pcf50633 is suspend state, refresh */
+ 
+ 	__reg_write(pcf, PCF50633_REG_OOCTIM2, pcf->standby_regs.ooctim2);
+ 	__reg_write(pcf, PCF50633_REG_AUTOOUT, pcf->standby_regs.autoout);
+@@ -2265,12 +2272,12 @@ static int pcf50633_resume(struct device *dev)
+ 	if (!pcf->pdata->defer_resume_backlight)
+ 		pcf50633_backlight_resume(pcf);
+ 
+-	/* FIXME: one big read? */
+-	for (i = 0; i < 7; i++) {
+-		u_int8_t reg_out = PCF50633_REG_LDO1OUT + 2*i;
+-		__reg_write(pcf, reg_out, pcf->standby_regs.ldo[i].out);
+-		__reg_write(pcf, reg_out+1, pcf->standby_regs.ldo[i].ena);
+-	}
++	/* regulator voltages and enable states */
++	ret = i2c_smbus_write_i2c_block_data(&pcf->client,
++					    PCF50633_REG_LDO1OUT, 14,
++					    &pcf->standby_regs.ldo[0][0]);
++	if (ret)
++		dev_err(dev, "Failed to restore LDOs :-( %d\n", ret);
+ 
+ 	mutex_unlock(&pcf->lock);
+ 
+-- 
+1.5.6.3
+