sunxi: driver refresh for 3.13 - update gmac / mmc / usb / ahci drivers to follow mainline dev trees - add driver for spi - update clock support - update a31 support - move to new DT compats where appropriate - re-order patchqueue where needed - verified working a20 smp - move most DTSes off files/ - update defconfig

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39782

3 files changed, 0 insertions, 411 deletions

diff --git a/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
deleted file mode 100644
index fa5ebbd..0000000
--- a/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-
-/ {
-	model = "Olimex A10-Olinuxino LIME";
-	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		sdc0: sdc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdc0_pins_a>;
-			pinctrl-1 = <&mmc0_cd_pin_olinuxino>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-mode = <1>;
-			status = "okay";
-		};
-
-		sata: ahci@01c18000 {
-			pwr-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin: ahci_pwr_pin@0 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin: usb1_vbus_pin@0 {
-					allwinner,pins = "PH6";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <2>;
-			};
-
-			usb2_vbus_pin: usb2_vbus_pin@0 {
-					allwinner,pins = "PH3";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <2>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		ehci0: ehci0@0x01c14000 {
-				vbus-supply = <&reg_usb1_vbus>;
-				status = "okay";
-		};
-
-		ehci1: ehci1@0x01c1c000 {
-				vbus-supply = <&reg_usb2_vbus>;
-				status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		green {
-			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 0>;
-			default-state = "on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_usb1_vbus: usb1-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_vbus_pin>;
-			regulator-name = "usb1-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 6 0>;
-		};
-
-		reg_usb2_vbus: usb2-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_pin>;
-			regulator-name = "usb2-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 3 0>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		pinctrl-names = "default";
-
-		reg_ahci_5v: ahci-5v {
-			compatible = "regulator-fixed";
-			regulator-name = "ahci-5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-0 = <&ahci_pwr_pin>;
-			gpio = <&pio 2 3 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-pcduino.dts
deleted file mode 100644
index 0cc7952..0000000
--- a/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-
-/ {
-	model = "pcDuino";
-	compatible = "pcduino,a10-pcduino", "allwinner,sun4i-a10";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		sdc0: sdc@01c0f000 {
-                        pinctrl-names = "default";
-                        pinctrl-0 = <&sdc0_pins_a>;
-                        pinctrl-1 = <&mmc0_cd_pin_pcduino>;
-                        cd-gpios = <&pio 7 1 0>; /* PH1 */
-                        cd-mode = <1>;
-                        status = "okay";
-                };
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_pcduino: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_pcduino: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin: usb1_vbus_pin@0 {
-					allwinner,pins = "PH6";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <2>;
-			};
-
-			usb2_vbus_pin: usb2_vbus_pin@0 {
-					allwinner,pins = "PH3";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <2>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		ehci0: ehci0@0x01c14000 {
-				vbus-supply = <&reg_usb1_vbus>;
-				status = "okay";
-		};
-
-		ehci1: ehci1@0x01c1c000 {
-				vbus-supply = <&reg_usb2_vbus>;
-				status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino>;
-
-		blue {
-			label = "pcduino:blue:usr";
-			gpios = <&pio 7 21 0>; /* LED1 */
-		};
-
-		green {
-			label = "pcduino:green:usr";
-			gpios = <&pio 7 20 0>; /* LED2 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_usb1_vbus: usb1-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_vbus_pin>;
-			regulator-name = "usb1-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 6 0>;
-		};
-
-		reg_usb2_vbus: usb2-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_pin>;
-			regulator-name = "usb2-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 3 0>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		pinctrl-names = "default";
-		
-		vcc_3v3_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 4ef28fd..8b14779 100644
--- a/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -19,45 +19,7 @@
 	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
-		sdc0: sdc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdc0_pins_a>;
-			pinctrl-1 = <&mmc0_cd_pin_cubietruck>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-mode = <1>;
-			status = "okay";
-		};
-
-		ehci0: ehci0@0x01c14000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		sata: ahci@01c18000 {
-			pwr-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: ehci1@0x01c1c000 {
-			vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
 		pinctrl@01c20800 {
-			mmc0_cd_pin_cubietruck: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			ahci_pwr_pin_cubietruck: ahci_pwr_pin@0 {
-				allwinner,pins = "PH12";
-			 	allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
 			led_pins_cubietruck: led_pins@0 {
 				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 				allwinner,function = "gpio_out";
@@ -112,41 +74,4 @@
 			gpios = <&pio 7 7 0>;
 		};
 	};
-
-	regulators {
-		compatible = "simple-bus";
-		pinctrl-names = "default";
-
-		reg_ahci_5v: ahci-5v {
-			compatible = "regulator-fixed";
-			regulator-name = "ahci-5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-			gpio = <&pio 7 12 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: usb1-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_vbus_pin>;
-			regulator-name = "usb1-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 6 0>;
-		};
-
-		reg_usb2_vbus: usb2-vbus {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_pin>;
-			regulator-name = "usb2-vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pio 7 3 0>;
-		};
-	};
 };