sunxi: driver refresh for 3.13 - update gmac / mmc / usb / ahci drivers to follow mainline dev trees - add driver for spi - update clock support - update a31 support - move to new DT compats where appropriate - re-order patchqueue where needed - verified working a20 smp - move most DTSes off files/ - update defconfig

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39782

1 files changed, 177 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch b/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch
new file mode 100644
index 0000000..ce5a070
--- /dev/null
+++ b/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch
@@ -0,0 +1,177 @@
+From 967f938d4b16233fd7596e94803a36161847c6a8 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Mon, 10 Feb 2014 18:35:47 +0800
+Subject: [PATCH] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit
+
+The Allwinner A20/A31 clock module controls the transmit clock source
+and interface type of the GMAC ethernet controller. Model this as
+a single clock for GMAC drivers to use.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt | 30 +++++++
+ drivers/clk/sunxi/clk-sunxi.c                     | 96 +++++++++++++++++++++++
+ 2 files changed, 126 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index 93d003c..0da774c 100644
+--- a/Documentation/devicetree/bindings/clock/sunxi.txt
++++ b/Documentation/devicetree/bindings/clock/sunxi.txt
+@@ -37,6 +37,7 @@ Required properties:
+ 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+ 	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
+ 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
++	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
+ 
+ Required properties for all clocks:
+ - reg : shall be the control register address for the clock.
+@@ -50,6 +51,9 @@ Required properties for all clocks:
+ 	If the clock module only has one output, the name shall be the
+ 	module name.
+ 
++For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
++dummy clocks at 25 MHz and 125 MHz, respectively. See example.
++
+ Clock consumers should specify the desired clocks they use with a
+ "clocks" phandle cell. Consumers that are using a gated clock should
+ provide an additional ID in their clock property. This ID is the
+@@ -96,3 +100,29 @@ mmc0_clk: clk@01c20088 {
+ 	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ 	clock-output-names = "mmc0";
+ };
++
++mii_phy_tx_clk: clk@2 {
++	#clock-cells = <0>;
++	compatible = "fixed-clock";
++	clock-frequency = <25000000>;
++	clock-output-names = "mii_phy_tx";
++};
++
++gmac_int_tx_clk: clk@3 {
++	#clock-cells = <0>;
++	compatible = "fixed-clock";
++	clock-frequency = <125000000>;
++	clock-output-names = "gmac_int_tx";
++};
++
++gmac_clk: clk@01c20164 {
++	#clock-cells = <0>;
++	compatible = "allwinner,sun7i-a20-gmac-clk";
++	reg = <0x01c20164 0x4>;
++	/*
++	 * The first clock must be fixed at 25MHz;
++	 * the second clock must be fixed at 125MHz
++	 */
++	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
++	clock-output-names = "gmac";
++};
+diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
+index 0dce6fd..3283179 100644
+--- a/drivers/clk/sunxi/clk-sunxi.c
++++ b/drivers/clk/sunxi/clk-sunxi.c
+@@ -404,6 +404,102 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
+ 
+ 
+ /**
++ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
++ *
++ * This clock looks something like this
++ *                               ________________________
++ *  MII TX clock from PHY >-----|___________    _________|----> to GMAC core
++ *  GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
++ *  Ext. 125MHz RGMII TX clk >--|__divider__/            |
++ *                              |________________________|
++ *
++ * The external 125 MHz reference is optional, i.e. GMAC can use its
++ * internal TX clock just fine. The A31 GMAC clock module does not have
++ * the divider controls for the external reference.
++ *
++ * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
++ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
++ * select the appropriate source and gate/ungate the output to the PHY.
++ *
++ * Only the GMAC should use this clock. Altering the clock so that it doesn't
++ * match the GMAC's operation parameters will result in the GMAC not being
++ * able to send traffic out. The GMAC driver should set the clock rate and
++ * enable/disable this clock to configure the required state. The clock
++ * driver then responds by auto-reparenting the clock.
++ */
++
++#define SUN7I_A20_GMAC_GPIT	2
++#define SUN7I_A20_GMAC_MASK	0x3
++#define SUN7I_A20_GMAC_PARENTS	2
++
++static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
++{
++	struct clk *clk;
++	struct clk_mux *mux;
++	struct clk_gate *gate;
++	const char *clk_name = node->name;
++	const char *parents[SUN7I_A20_GMAC_PARENTS];
++	void *reg;
++
++	if (of_property_read_string(node, "clock-output-names", &clk_name))
++		return;
++
++	/* allocate mux and gate clock structs */
++	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
++	if (!mux)
++		return;
++
++	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
++	if (!gate)
++		goto free_mux;
++
++	/* gmac clock requires exactly 2 parents */
++	parents[0] = of_clk_get_parent_name(node, 0);
++	parents[1] = of_clk_get_parent_name(node, 1);
++	if (!parents[0] || !parents[1])
++		goto free_gate;
++
++	reg = of_iomap(node, 0);
++	if (!reg)
++		goto free_gate;
++
++	/* set up gate and fixed rate properties */
++	gate->reg = reg;
++	gate->bit_idx = SUN7I_A20_GMAC_GPIT;
++	gate->lock = &clk_lock;
++	mux->reg = reg;
++	mux->mask = SUN7I_A20_GMAC_MASK;
++	mux->flags = CLK_MUX_INDEX_BIT;
++	mux->lock = &clk_lock;
++
++	clk = clk_register_composite(NULL, clk_name,
++			parents, SUN7I_A20_GMAC_PARENTS,
++			&mux->hw, &clk_mux_ops,
++			NULL, NULL,
++			&gate->hw, &clk_gate_ops,
++			0);
++
++	if (IS_ERR(clk))
++		goto iounmap_reg;
++
++	of_clk_add_provider(node, of_clk_src_simple_get, clk);
++	clk_register_clkdev(clk, clk_name, NULL);
++
++	return;
++
++iounmap_reg:
++	iounmap(reg);
++free_gate:
++	kfree(gate);
++free_mux:
++	kfree(mux);
++}
++CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
++		sun7i_a20_gmac_clk_setup);
++
++
++
++/**
+  * sunxi_factors_clk_setup() - Setup function for factor clocks
+  */
+ 
+-- 
+1.8.5.5
+