sunxi: initial 3.14 patchset

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42313

1 files changed, 149 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch
new file mode 100644
index 0000000..c6f9edb
--- /dev/null
+++ b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch
@@ -0,0 +1,149 @@
+From a1c70ed831e4d5356618834202b0da3aa34e218e Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 10 Jan 2014 23:23:06 +0100
+Subject: [PATCH] ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
+
+This add support for the A10-OLinuXino-LIME:
+https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME
+
+A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/Makefile                     |   1 +
+ arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 111 +++++++++++++++++++++++++
+ 2 files changed, 112 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 8e1d636..66d6df3 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
+ 	sun4i-a10-cubieboard.dtb \
+ 	sun4i-a10-mini-xplus.dtb \
+ 	sun4i-a10-hackberry.dtb \
++	sun4i-a10-olinuxino-lime.dtb \
+ 	sun4i-a10-pcduino.dtb \
+ 	sun5i-a10s-olinuxino-micro.dtb \
+ 	sun5i-a13-olinuxino.dtb \
+diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+new file mode 100644
+index 0000000..66cf0c7
+--- /dev/null
++++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+@@ -0,0 +1,111 @@
++/*
++ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++/include/ "sun4i-a10.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++	model = "Olimex A10-OLinuXino-LIME";
++	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
++
++	soc@01c00000 {
++		emac: ethernet@01c0b000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&emac_pins_a>;
++			phy = <&phy1>;
++			status = "okay";
++		};
++
++		mdio@01c0b080 {
++			status = "okay";
++
++			phy1: ethernet-phy@1 {
++				reg = <1>;
++			};
++		};
++
++		usbphy: phy@01c13400 {
++			usb1_vbus-supply = <&reg_usb1_vbus>;
++			usb2_vbus-supply = <&reg_usb2_vbus>;
++			status = "okay";
++		};
++
++		ehci0: usb@01c14000 {
++			status = "okay";
++		};
++
++		ohci0: usb@01c14400 {
++			status = "okay";
++		};
++
++		ahci: sata@01c18000 {
++			target-supply = <&reg_ahci_5v>;
++			status = "okay";
++		};
++
++		ehci1: usb@01c1c000 {
++			status = "okay";
++		};
++
++		ohci1: usb@01c1c400 {
++			status = "okay";
++		};
++
++		pinctrl@01c20800 {
++			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
++				allwinner,pins = "PC3";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
++			led_pins_olinuxinolime: led_pins@0 {
++				allwinner,pins = "PH2";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <1>;
++				allwinner,pull = <0>;
++			};
++		};
++
++		uart0: serial@01c28000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart0_pins_a>;
++			status = "okay";
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&led_pins_olinuxinolime>;
++
++		green {
++			label = "a10-olinuxino-lime:green:usr";
++			gpios = <&pio 7 2 0>;
++			default-state = "on";
++		};
++	};
++
++	reg_ahci_5v: ahci-5v {
++		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
++		gpio = <&pio 2 3 0>;
++		status = "okay";
++	};
++
++	reg_usb1_vbus: usb1-vbus {
++		status = "okay";
++	};
++
++	reg_usb2_vbus: usb2-vbus {
++		status = "okay";
++	};
++};
+-- 
+2.0.3
+