diff options
| author | Daniel Kucera <daniel.kucera@gmail.com> | 2017-02-19 09:46:44 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-10-14 10:48:29 +0200 |
| commit | 6f008af3f0b30d2af21ad6934c17b0ae69103ecd (patch) | |
| tree | 38a4acdc3512354fa9befec44f591bcc831d0913 /target/linux/sunxi | |
| parent | f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e (diff) | |
| download | mtk-20170518-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.zip mtk-20170518-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.gz mtk-20170518-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.bz2 | |
ramips: add support for Kimax U25AWF-H1
Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection
and battery, based on MediaTek MT7620A.
Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643
Specification:
- MT7620A CPU
- 64 MB of RAM
- 16 MB of FLASH
- 802.11bgn WiFi
- 1x 10/100 Mbps Ethernet
- USB 2.0 Host
- UART for serial console
Flash instruction:
1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin
2. Open webinterface a upgrade
3. After boot connect via ethernet to ip 192.168.1.1
Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com>
[fix reset button gpio, don't add a lan/wan vlan config for single
port board, add -H1 suffix do make sure that this revision of the
board is supported/tested]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/sunxi')
0 files changed, 0 insertions, 0 deletions