level up target xburst to linux kernel version 3.2.1

Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

SVN-Revision: 31218

27 files changed, 5564 insertions, 42 deletions

diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile
index aae1a8e..8cec439 100644
--- a/target/linux/xburst/Makefile
+++ b/target/linux/xburst/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst
 FEATURES:=jffs2 targz ubifs audio
 SUBTARGETS:=qi_lb60 n516 n526 id800wt
 
-LINUX_VERSION:=2.6.37.6
+LINUX_VERSION:=3.2.1
 
 DEVICE_TYPE=other
 
diff --git a/target/linux/xburst/config-3.2 b/target/linux/xburst/config-3.2
new file mode 100644
index 0000000..6ca771a
--- /dev/null
+++ b/target/linux/xburst/config-3.2
@@ -0,0 +1,318 @@
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARPD is not set
+# CONFIG_ATH79 is not set
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+CONFIG_BATTERY_JZ4740=y
+CONFIG_BCMA_POSSIBLE=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BRIDGE is not set
+CONFIG_CHARGER_GPIO=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DEVMEM=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_JZ4740=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PWM=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_GPIO_BUTTONS is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_PWM_BEEPER is not set
+CONFIG_INPUT_UINPUT=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_JBD2=y
+CONFIG_JZ4740_QI_LB60=y
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_LANTIQ is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_JZ4740=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_JZ4740_ADC=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_CPUFREQ=y
+CONFIG_MIPS_FPU_EMU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_JZ4740=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PDA_POWER is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_QUOTACTL is not set
+# CONFIG_RCU_BOOST is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_JZ4740=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SDIO_UART is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SND=y
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_JACK=y
+CONFIG_SND_JZ4740_SOC=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_JZ4740_SOC_QI_LB60=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+CONFIG_SND_PCM=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_JZ4740_CODEC=y
+CONFIG_SND_TIMER=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_STAGING is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SYN_COOKIES is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TINY_PREEMPT_RCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_UBIFS_FS_LZO=y
+# CONFIG_UBIFS_FS_XATTR is not set
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_COMMON=y
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FUSB300=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_USB_GADGET_VBUS_DRAW=2
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_JZ4740 is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_R8A66597 is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ZERO is not set
+CONFIG_VFAT_FS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_WATCHDOG is not set
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/xburst/patches-3.2/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.2/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
new file mode 100644
index 0000000..40a1eaa
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
@@ -0,0 +1,26 @@
+From 73aab29ddc44a3e1a7156473ad5bc9cd80704274 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 15 Mar 2011 12:49:15 +0100
+Subject: [PATCH 01/21] ubi: Read only the vid header instead of the whole
+ page
+
+---
+ drivers/mtd/ubi/io.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
+index f20b6f2..e66079d 100644
+--- a/drivers/mtd/ubi/io.c
++++ b/drivers/mtd/ubi/io.c
+@@ -1031,7 +1031,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
+ 
+ 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
+ 	read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+-			  ubi->vid_hdr_alsize);
++			  UBI_VID_HDR_SIZE + ubi->vid_hdr_shift);
+ 	if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+ 		return read_err;
+ 
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0002-Add-jz4740-udc-driver.patch b/target/linux/xburst/patches-3.2/0002-Add-jz4740-udc-driver.patch
new file mode 100644
index 0000000..f6d0015
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0002-Add-jz4740-udc-driver.patch
@@ -0,0 +1,2386 @@
+From 537082e01849ca85227c5b462b8ac9aceb11b77a Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 24 Apr 2010 12:18:46 +0200
+Subject: [PATCH 02/21] Add jz4740 udc driver
+
+History:
+- driver by Ingenic
+- patch by Lars-Peter Clausen.
+- updated to 3.1 by Maarten ter Huurne
+---
+ drivers/usb/gadget/Kconfig        |    8 +
+ drivers/usb/gadget/Makefile       |    1 +
+ drivers/usb/gadget/gadget_chips.h |    3 +
+ drivers/usb/gadget/jz4740_udc.c   | 2199 +++++++++++++++++++++++++++++++++++++
+ drivers/usb/gadget/jz4740_udc.h   |  101 ++
+ 5 files changed, 2312 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/gadget/jz4740_udc.c
+ create mode 100644 drivers/usb/gadget/jz4740_udc.h
+
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index 23a4473..89b7d28 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -178,6 +178,14 @@ config USB_FUSB300
+ 	help
+ 	   Faraday usb device controller FUSB300 driver
+ 
++config USB_JZ4740
++	tristate "JZ4740 UDC"
++	depends on MACH_JZ4740
++	select USB_GADGET_DUALSPEED
++	help
++	   Select this to support the Ingenic JZ4740 processor
++	   high speed USB device controller.
++
+ config USB_OMAP
+ 	tristate "OMAP USB Device Controller"
+ 	depends on ARCH_OMAP
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index b54ac61..2d65f6e 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+ mv_udc-y			:= mv_udc_core.o
+ obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
+ obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
++obj-$(CONFIG_USB_JZ4740)	+= jz4740_udc.o
+ 
+ #
+ # USB gadget drivers
+diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
+index a8855d0..99f1580 100644
+--- a/drivers/usb/gadget/gadget_chips.h
++++ b/drivers/usb/gadget/gadget_chips.h
+@@ -36,6 +36,7 @@
+ #define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
+ #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
+ #define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
++#define gadget_is_jz4740(g)		(!strcmp("ingenic_hsusb", (g)->name))
+ #define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
+ #define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
+ #define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
+@@ -118,6 +119,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+ 		return 0x31;
+ 	else if (gadget_is_dwc3(gadget))
+ 		return 0x32;
++	else if (gadget_is_jz4740(gadget))
++		return 0x33;
+ 
+ 	return -ENOENT;
+ }
+diff --git a/drivers/usb/gadget/jz4740_udc.c b/drivers/usb/gadget/jz4740_udc.c
+new file mode 100644
+index 0000000..8d36434
+--- /dev/null
++++ b/drivers/usb/gadget/jz4740_udc.c
+@@ -0,0 +1,2199 @@
++/*
++ * linux/drivers/usb/gadget/jz4740_udc.c
++ *
++ * Ingenic JZ4740 on-chip high speed USB device controller
++ *
++ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
++ * Author: <jlwei@ingenic.cn>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint.
++ *
++ *  - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk.
++ *  - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/proc_fs.h>
++#include <linux/usb.h>
++#include <linux/usb/gadget.h>
++#include <linux/clk.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/mach-jz4740/clock.h>
++
++#include "jz4740_udc.h"
++
++#define JZ_REG_UDC_FADDR	0x00 /* Function Address 8-bit */
++#define JZ_REG_UDC_POWER	0x01 /* Power Management 8-bit */
++#define JZ_REG_UDC_INTRIN	0x02 /* Interrupt IN 16-bit */
++#define JZ_REG_UDC_INTROUT	0x04 /* Interrupt OUT 16-bit */
++#define JZ_REG_UDC_INTRINE	0x06 /* Intr IN enable 16-bit */
++#define JZ_REG_UDC_INTROUTE	0x08 /* Intr OUT enable 16-bit */
++#define JZ_REG_UDC_INTRUSB	0x0a /* Interrupt USB 8-bit */
++#define JZ_REG_UDC_INTRUSBE	0x0b /* Interrupt USB Enable 8-bit */
++#define JZ_REG_UDC_FRAME	0x0c /* Frame number 16-bit */
++#define JZ_REG_UDC_INDEX	0x0e /* Index register 8-bit */
++#define JZ_REG_UDC_TESTMODE	0x0f /* USB test mode 8-bit */
++
++#define JZ_REG_UDC_CSR0		0x12 /* EP0 CSR 8-bit */
++#define JZ_REG_UDC_INMAXP	0x10 /* EP1-2 IN Max Pkt Size 16-bit */
++#define JZ_REG_UDC_INCSR	0x12 /* EP1-2 IN CSR LSB 8/16bit */
++#define JZ_REG_UDC_INCSRH	0x13 /* EP1-2 IN CSR MSB 8-bit */
++
++#define JZ_REG_UDC_OUTMAXP	0x14 /* EP1 OUT Max Pkt Size 16-bit */
++#define JZ_REG_UDC_OUTCSR	0x16 /* EP1 OUT CSR LSB 8/16bit */
++#define JZ_REG_UDC_OUTCSRH	0x17 /* EP1 OUT CSR MSB 8-bit */
++#define JZ_REG_UDC_OUTCOUNT	0x18 /* bytes in EP0/1 OUT FIFO 16-bit */
++
++#define JZ_REG_UDC_EP_FIFO(x)	(4 * (x) + 0x20)
++
++#define JZ_REG_UDC_EPINFO	0x78 /* Endpoint information */
++#define JZ_REG_UDC_RAMINFO	0x79 /* RAM information */
++
++#define JZ_REG_UDC_INTR		0x200 /* DMA pending interrupts */
++#define JZ_REG_UDC_CNTL1	0x204 /* DMA channel 1 control */
++#define JZ_REG_UDC_ADDR1	0x208 /* DMA channel 1 AHB memory addr */
++#define JZ_REG_UDC_COUNT1	0x20c /* DMA channel 1 byte count */
++#define JZ_REG_UDC_CNTL2	0x214 /* DMA channel 2 control */
++#define JZ_REG_UDC_ADDR2	0x218 /* DMA channel 2 AHB memory addr */
++#define JZ_REG_UDC_COUNT2	0x21c /* DMA channel 2 byte count */
++
++/* Power register bit masks */
++#define USB_POWER_SUSPENDM	0x01
++#define USB_POWER_RESUME	0x04
++#define USB_POWER_HSMODE	0x10
++#define USB_POWER_HSENAB	0x20
++#define USB_POWER_SOFTCONN	0x40
++
++/* Interrupt register bit masks */
++#define USB_INTR_SUSPEND	0x01
++#define USB_INTR_RESUME		0x02
++#define USB_INTR_RESET		0x04
++
++#define USB_INTR_EP0		0x0001
++#define USB_INTR_INEP1		0x0002
++#define USB_INTR_INEP2		0x0004
++#define USB_INTR_OUTEP1		0x0002
++
++/* CSR0 bit masks */
++#define USB_CSR0_OUTPKTRDY	0x01
++#define USB_CSR0_INPKTRDY	0x02
++#define USB_CSR0_SENTSTALL	0x04
++#define USB_CSR0_DATAEND	0x08
++#define USB_CSR0_SETUPEND	0x10
++#define USB_CSR0_SENDSTALL	0x20
++#define USB_CSR0_SVDOUTPKTRDY	0x40
++#define USB_CSR0_SVDSETUPEND	0x80
++
++/* Endpoint CSR register bits */
++#define USB_INCSRH_AUTOSET	0x80
++#define USB_INCSRH_ISO		0x40
++#define USB_INCSRH_MODE		0x20
++#define USB_INCSRH_DMAREQENAB	0x10
++#define USB_INCSRH_DMAREQMODE	0x04
++#define USB_INCSR_CDT		0x40
++#define USB_INCSR_SENTSTALL	0x20
++#define USB_INCSR_SENDSTALL	0x10
++#define USB_INCSR_FF		0x08
++#define USB_INCSR_UNDERRUN	0x04
++#define USB_INCSR_FFNOTEMPT	0x02
++#define USB_INCSR_INPKTRDY	0x01
++
++#define USB_OUTCSRH_AUTOCLR	0x80
++#define USB_OUTCSRH_ISO		0x40
++#define USB_OUTCSRH_DMAREQENAB	0x20
++#define USB_OUTCSRH_DNYT	0x10
++#define USB_OUTCSRH_DMAREQMODE	0x08
++#define USB_OUTCSR_CDT		0x80
++#define USB_OUTCSR_SENTSTALL	0x40
++#define USB_OUTCSR_SENDSTALL	0x20
++#define USB_OUTCSR_FF		0x10
++#define USB_OUTCSR_DATAERR	0x08
++#define USB_OUTCSR_OVERRUN	0x04
++#define USB_OUTCSR_FFFULL	0x02
++#define USB_OUTCSR_OUTPKTRDY	0x01
++
++/* DMA control bits */
++#define USB_CNTL_ENA		0x01
++#define USB_CNTL_DIR_IN		0x02
++#define USB_CNTL_MODE_1		0x04
++#define USB_CNTL_INTR_EN	0x08
++#define USB_CNTL_EP(n)		((n) << 4)
++#define USB_CNTL_BURST_0	(0 << 9)
++#define USB_CNTL_BURST_4	(1 << 9)
++#define USB_CNTL_BURST_8	(2 << 9)
++#define USB_CNTL_BURST_16	(3 << 9)
++
++
++#ifndef DEBUG
++# define DEBUG(fmt,args...) do {} while(0)
++#endif
++#ifndef DEBUG_EP0
++# define NO_STATES
++# define DEBUG_EP0(fmt,args...) do {} while(0)
++#endif
++#ifndef DEBUG_SETUP
++# define DEBUG_SETUP(fmt,args...) do {} while(0)
++#endif
++
++static struct jz4740_udc jz4740_udc_controller;
++
++/*
++ * Local declarations.
++ */
++static int jz4740_udc_start(struct usb_gadget_driver *driver,
++		int (*bind)(struct usb_gadget *));
++static int jz4740_udc_stop(struct usb_gadget_driver *driver);
++static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep);
++static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr);
++
++static void done(struct jz4740_ep *ep, struct jz4740_request *req,
++		 int status);
++static void pio_irq_enable(struct jz4740_ep *ep);
++static void pio_irq_disable(struct jz4740_ep *ep);
++static void stop_activity(struct jz4740_udc *dev,
++			  struct usb_gadget_driver *driver);
++static void nuke(struct jz4740_ep *ep, int status);
++static void flush(struct jz4740_ep *ep);
++static void udc_set_address(struct jz4740_udc *dev, unsigned char address);
++
++/*-------------------------------------------------------------------------*/
++
++/* inline functions of register read/write/set/clear  */
++
++static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg)
++{
++	return readb(udc->base + reg);
++}
++
++static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg)
++{
++	return readw(udc->base + reg);
++}
++
++static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg)
++{
++	return readl(udc->base + reg);
++}
++
++static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val)
++{
++	writeb(val, udc->base + reg);
++}
++
++static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val)
++{
++	writew(val, udc->base + reg);
++}
++
++static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val)
++{
++	writel(val, udc->base + reg);
++}
++
++static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
++{
++	usb_writeb(udc, reg, usb_readb(udc, reg) | mask);
++}
++
++static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
++{
++	usb_writew(udc, reg, usb_readw(udc, reg) | mask);
++}
++
++static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
++{
++	usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask);
++}
++
++static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
++{
++	usb_writew(udc, reg, usb_readw(udc, reg) & ~mask);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index)
++{
++	usb_writeb(udc, JZ_REG_UDC_INDEX, index);
++}
++
++static inline void jz_udc_select_ep(struct jz4740_ep *ep)
++{
++	jz_udc_set_index(ep->dev, ep_index(ep));
++}
++
++static inline int write_packet(struct jz4740_ep *ep,
++				   struct jz4740_request *req, unsigned int count)
++{
++	uint8_t *buf;
++	unsigned int length;
++	void __iomem *fifo = ep->dev->base + ep->fifo;
++
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	buf = req->req.buf + req->req.actual;
++
++	length = req->req.length - req->req.actual;
++	if (length > count)
++		length = count;
++	req->req.actual += length;
++
++	DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo);
++
++	writesl(fifo, buf, length >> 2);
++	writesb(fifo, &buf[length - (length & 3)], length & 3);
++
++	return length;
++}
++
++static int read_packet(struct jz4740_ep *ep,
++				  struct jz4740_request *req, unsigned int count)
++{
++	uint8_t *buf;
++	unsigned int length;
++	void __iomem *fifo = ep->dev->base + ep->fifo;
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	buf = req->req.buf + req->req.actual;
++
++	length = req->req.length - req->req.actual;
++	if (length > count)
++		length = count;
++	req->req.actual += length;
++
++	DEBUG("Read %d, fifo %x\n", length, ep->fifo);
++
++	readsl(fifo, buf, length >> 2);
++	readsb(fifo, &buf[length - (length & 3)], length & 3);
++
++	return length;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * 	udc_disable - disable USB device controller
++ */
++static void udc_disable(struct jz4740_udc *dev)
++{
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	udc_set_address(dev, 0);
++
++	/* Disable interrupts */
++	usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
++	usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
++	usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);
++
++	/* Disable DMA */
++	usb_writel(dev, JZ_REG_UDC_CNTL1, 0);
++	usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
++
++	/* Disconnect from usb */
++	usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
++
++	/* Disable the USB PHY */
++	clk_disable(dev->clk);
++
++	dev->ep0state = WAIT_FOR_SETUP;
++	dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++	return;
++}
++
++/*
++ * 	udc_reinit - initialize software state
++ */
++static void udc_reinit(struct jz4740_udc *dev)
++{
++	int i;
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	/* device/ep0 records init */
++	INIT_LIST_HEAD(&dev->gadget.ep_list);
++	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
++	dev->ep0state = WAIT_FOR_SETUP;
++
++	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++		struct jz4740_ep *ep = &dev->ep[i];
++
++		if (i != 0)
++			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
++
++		INIT_LIST_HEAD(&ep->queue);
++		ep->desc = 0;
++		ep->stopped = 0;
++	}
++}
++
++/* until it's enabled, this UDC should be completely invisible
++ * to any USB host.
++ */
++static void udc_enable(struct jz4740_udc *dev)
++{
++	int i;
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	/* UDC state is incorrect - Added by River */
++	if (dev->state != UDC_STATE_ENABLE) {
++		return;
++	}
++
++	dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++	/* Flush FIFO for each */
++	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++		struct jz4740_ep *ep = &dev->ep[i];
++
++		jz_udc_select_ep(ep);
++		flush(ep);
++	}
++
++	/* Set this bit to allow the UDC entering low-power mode when
++	 * there are no actions on the USB bus.
++	 * UDC still works during this bit was set.
++	 */
++	jz4740_clock_udc_enable_auto_suspend();
++
++	/* Enable the USB PHY */
++	clk_enable(dev->clk);
++
++	/* Disable interrupts */
++/*	usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
++	usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
++	usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/
++
++	/* Enable interrupts */
++	usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0);
++	usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET);
++	/* Don't enable rest of the interrupts */
++	/* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2);
++	   usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */
++
++	/* Enable SUSPEND */
++	/* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */
++
++	/* Enable HS Mode */
++	usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB);
++
++	/* Let host detect UDC:
++	 * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this
++	 * transistor on and pull the USBDP pin HIGH.
++	 */
++	usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
++
++	return;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* keeping it simple:
++ * - one bus driver, initted first;
++ * - one function driver, initted second
++ */
++
++/*
++ * Register entry point for the peripheral controller driver.
++ */
++
++static int jz4740_udc_start(struct usb_gadget_driver *driver,
++		int (*bind)(struct usb_gadget *))
++{
++	struct jz4740_udc *dev = &jz4740_udc_controller;
++	int retval;
++
++	if (!driver || !bind)
++		return -EINVAL;
++
++	if (!dev)
++		return -ENODEV;
++
++	if (dev->driver)
++		return -EBUSY;
++
++	/* hook up the driver */
++	dev->driver = driver;
++	dev->gadget.dev.driver = &driver->driver;
++
++	retval = bind(&dev->gadget);
++	if (retval) {
++		DEBUG("%s: bind to driver %s --> error %d\n", dev->gadget.name,
++		            driver->driver.name, retval);
++		dev->driver = 0;
++		return retval;
++	}
++
++	/* then enable host detection and ep0; and we're ready
++	 * for set_configuration as well as eventual disconnect.
++	 */
++	udc_enable(dev);
++
++	DEBUG("%s: registered gadget driver '%s'\n", dev->gadget.name,
++	      driver->driver.name);
++
++	return 0;
++}
++
++static void stop_activity(struct jz4740_udc *dev,
++			  struct usb_gadget_driver *driver)
++{
++	int i;
++
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	/* don't disconnect drivers more than once */
++	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
++		driver = 0;
++	dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++		struct jz4740_ep *ep = &dev->ep[i];
++
++		ep->stopped = 1;
++
++		jz_udc_select_ep(ep);
++		nuke(ep, -ESHUTDOWN);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (driver) {
++		spin_unlock(&dev->lock);
++		driver->disconnect(&dev->gadget);
++		spin_lock(&dev->lock);
++	}
++
++	/* re-init driver-visible data structures */
++	udc_reinit(dev);
++}
++
++
++/*
++ * Unregister entry point for the peripheral controller driver.
++ */
++static int jz4740_udc_stop(struct usb_gadget_driver *driver)
++{
++	struct jz4740_udc *dev = &jz4740_udc_controller;
++	unsigned long flags;
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	if (!dev)
++		return -ENODEV;
++	if (!driver || driver != dev->driver)
++		return -EINVAL;
++	if (!driver->unbind)
++		return -EBUSY;
++
++	spin_lock_irqsave(&dev->lock, flags);
++	dev->driver = 0;
++	stop_activity(dev, driver);
++	spin_unlock_irqrestore(&dev->lock, flags);
++
++	driver->unbind(&dev->gadget);
++
++	udc_disable(dev);
++
++	DEBUG("unregistered driver '%s'\n", driver->driver.name);
++
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/** Write request to FIFO (max write == maxp size)
++ *  Return:  0 = still running, 1 = completed, negative = errno
++ *  NOTE: INDEX register must be set for EP
++ */
++static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++	struct jz4740_udc *dev = ep->dev;
++	uint32_t max, csr;
++
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++	max = le16_to_cpu(ep->desc->wMaxPacketSize);
++
++	csr = usb_readb(dev, ep->csr);
++
++	if (!(csr & USB_INCSR_FFNOTEMPT)) {
++		unsigned count;
++		int is_last, is_short;
++
++		count = write_packet(ep, req, max);
++		usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
++
++		/* last packet is usually short (or a zlp) */
++		if (unlikely(count != max))
++			is_last = is_short = 1;
++		else {
++			if (likely(req->req.length != req->req.actual)
++			    || req->req.zero)
++				is_last = 0;
++			else
++				is_last = 1;
++			/* interrupt/iso maxpacket may not fill the fifo */
++			is_short = unlikely(max < ep_maxpacket(ep));
++		}
++
++		DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
++		      ep->ep.name, count,
++		      is_last ? "/L" : "", is_short ? "/S" : "",
++		      req->req.length - req->req.actual, req);
++
++		/* requests complete when all IN data is in the FIFO */
++		if (is_last) {
++			done(ep, req, 0);
++			if (list_empty(&ep->queue)) {
++				pio_irq_disable(ep);
++			}
++			return 1;
++		}
++	} else {
++		DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
++	}
++
++	return 0;
++}
++
++/** Read to request from FIFO (max read == bytes in fifo)
++ *  Return:  0 = still running, 1 = completed, negative = errno
++ *  NOTE: INDEX register must be set for EP
++ */
++static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++	struct jz4740_udc *dev = ep->dev;
++	uint32_t csr;
++	unsigned count, is_short;
++
++	/* make sure there's a packet in the FIFO. */
++	csr = usb_readb(dev, ep->csr);
++	if (!(csr & USB_OUTCSR_OUTPKTRDY)) {
++		DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* read all bytes from this packet */
++	count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
++
++	is_short = (count < ep->ep.maxpacket);
++
++	count = read_packet(ep, req, count);
++
++	DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
++	      ep->ep.name, csr, count,
++	      is_short ? "/S" : "", req, req->req.actual, req->req.length);
++
++	/* Clear OutPktRdy */
++	usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
++
++	/* completion */
++	if (is_short || req->req.actual == req->req.length) {
++		done(ep, req, 0);
++
++		if (list_empty(&ep->queue))
++			pio_irq_disable(ep);
++		return 1;
++	}
++
++	/* finished that packet.  the next one may be waiting... */
++	return 0;
++}
++
++/*
++ *	done - retire a request; caller blocked irqs
++ *  INDEX register is preserved to keep same
++ */
++static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status)
++{
++	unsigned int stopped = ep->stopped;
++	uint32_t index;
++
++	DEBUG("%s, %p\n", __FUNCTION__, ep);
++	list_del_init(&req->queue);
++
++	if (likely(req->req.status == -EINPROGRESS))
++		req->req.status = status;
++	else
++		status = req->req.status;
++
++	if (status && status != -ESHUTDOWN)
++		DEBUG("complete %s req %p stat %d len %u/%u\n",
++		      ep->ep.name, &req->req, status,
++		      req->req.actual, req->req.length);
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	/* Read current index (completion may modify it) */
++	index = usb_readb(ep->dev, JZ_REG_UDC_INDEX);
++	spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags);
++
++	req->req.complete(&ep->ep, &req->req);
++
++	spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags);
++	/* Restore index */
++	jz_udc_set_index(ep->dev, index);
++	ep->stopped = stopped;
++}
++
++static inline unsigned int jz4740_udc_ep_irq_enable_reg(struct jz4740_ep *ep)
++{
++	if (ep_is_in(ep))
++		return JZ_REG_UDC_INTRINE;
++	else
++		return JZ_REG_UDC_INTROUTE;
++}
++
++/** Enable EP interrupt */
++static void pio_irq_enable(struct jz4740_ep *ep)
++{
++	DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
++
++	usb_setw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
++}
++
++/** Disable EP interrupt */
++static void pio_irq_disable(struct jz4740_ep *ep)
++{
++	DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
++
++	usb_clearw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
++}
++
++/*
++ * 	nuke - dequeue ALL requests
++ */
++static void nuke(struct jz4740_ep *ep, int status)
++{
++	struct jz4740_request *req;
++
++	DEBUG("%s, %p\n", __FUNCTION__, ep);
++
++	/* Flush FIFO */
++	flush(ep);
++
++	/* called with irqs blocked */
++	while (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next, struct jz4740_request, queue);
++		done(ep, req, status);
++	}
++
++	/* Disable IRQ if EP is enabled (has descriptor) */
++	if (ep->desc)
++		pio_irq_disable(ep);
++}
++
++/** Flush EP FIFO
++ * NOTE: INDEX register must be set before this call
++ */
++static void flush(struct jz4740_ep *ep)
++{
++	DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name);
++
++	switch (ep->type) {
++	case ep_bulk_in:
++	case ep_interrupt:
++		usb_setb(ep->dev, ep->csr, USB_INCSR_FF);
++		break;
++	case ep_bulk_out:
++		usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF);
++		break;
++	case ep_control:
++		break;
++	}
++}
++
++/**
++ * jz4740_in_epn - handle IN interrupt
++ */
++static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
++{
++	uint32_t csr;
++	struct jz4740_ep *ep = &dev->ep[ep_idx + 1];
++	struct jz4740_request *req;
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	jz_udc_select_ep(ep);
++
++	csr = usb_readb(dev, ep->csr);
++	DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
++
++	if (csr & USB_INCSR_SENTSTALL) {
++		DEBUG("USB_INCSR_SENTSTALL\n");
++		usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL);
++		return;
++	}
++
++	if (!ep->desc) {
++		DEBUG("%s: NO EP DESC\n", __FUNCTION__);
++		return;
++	}
++
++	if (!list_empty(&ep->queue)) {
++		req = list_first_entry(&ep->queue, struct jz4740_request, queue);
++		write_fifo(ep, req);
++	}
++}
++
++/*
++ * Bulk OUT (recv)
++ */
++static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
++{
++	struct jz4740_ep *ep = &dev->ep[ep_idx];
++	struct jz4740_request *req;
++
++	DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
++
++	jz_udc_select_ep(ep);
++	if (ep->desc) {
++		uint32_t csr;
++
++		while ((csr = usb_readb(dev, ep->csr)) &
++		       (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) {
++			DEBUG("%s: %x\n", __FUNCTION__, csr);
++
++			if (csr & USB_OUTCSR_SENTSTALL) {
++				DEBUG("%s: stall sent, flush fifo\n",
++				      __FUNCTION__);
++				/* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
++				flush(ep);
++			} else if (csr & USB_OUTCSR_OUTPKTRDY) {
++				if (list_empty(&ep->queue))
++					req = 0;
++				else
++					req =
++						list_entry(ep->queue.next,
++							   struct jz4740_request,
++							   queue);
++
++				if (!req) {
++					DEBUG("%s: NULL REQ %d\n",
++					      __FUNCTION__, ep_idx);
++					break;
++				} else {
++					read_fifo(ep, req);
++				}
++			}
++		}
++	} else {
++		/* Throw packet away.. */
++		DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx);
++		flush(ep);
++	}
++}
++
++/** Halt specific EP
++ *  Return 0 if success
++ *  NOTE: Sets INDEX register to EP !
++ */
++static int jz4740_set_halt(struct usb_ep *_ep, int value)
++{
++	struct jz4740_udc *dev;
++	struct jz4740_ep *ep;
++	unsigned long flags;
++
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
++		DEBUG("%s, bad ep\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	dev = ep->dev;
++
++	spin_lock_irqsave(&dev->lock, flags);
++
++	jz_udc_select_ep(ep);
++
++	DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
++
++	if (ep_index(ep) == 0) {
++		/* EP0 */
++		usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL);
++	} else if (ep_is_in(ep)) {
++		uint32_t csr = usb_readb(dev, ep->csr);
++		if (value && ((csr & USB_INCSR_FFNOTEMPT)
++			      || !list_empty(&ep->queue))) {
++			/*
++			 * Attempts to halt IN endpoints will fail (returning -EAGAIN)
++			 * if any transfer requests are still queued, or if the controller
++			 * FIFO still holds bytes that the host hasn’t collected.
++			 */
++			spin_unlock_irqrestore(&dev->lock, flags);
++			DEBUG
++			    ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
++			     (csr & USB_INCSR_FFNOTEMPT),
++			     !list_empty(&ep->queue));
++			return -EAGAIN;
++		}
++		flush(ep);
++		if (value) {
++			usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL);
++		} else {
++			usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL);
++			usb_setb(dev, ep->csr, USB_INCSR_CDT);
++		}
++	} else {
++
++		flush(ep);
++		if (value) {
++			usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
++		} else {
++			usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
++			usb_setb(dev, ep->csr, USB_OUTCSR_CDT);
++		}
++	}
++
++	ep->stopped = value;
++
++	spin_unlock_irqrestore(&dev->lock, flags);
++
++	DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
++
++	return 0;
++}
++
++
++static int jz4740_ep_enable(struct usb_ep *_ep,
++			    const struct usb_endpoint_descriptor *desc)
++{
++	struct jz4740_ep *ep;
++	struct jz4740_udc *dev;
++	unsigned long flags;
++	uint32_t max, csrh = 0;
++
++	DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name);
++
++	if (!_ep || !desc)
++		return -EINVAL;
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (ep->desc || ep->type == ep_control
++	    || desc->bDescriptorType != USB_DT_ENDPOINT
++	    || ep->bEndpointAddress != desc->bEndpointAddress) {
++		DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* xfer types must match, except that interrupt ~= bulk */
++	if (ep->bmAttributes != desc->bmAttributes
++	    && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
++	    && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
++		DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
++		return -EINVAL;
++	}
++
++	dev = ep->dev;
++	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
++		DEBUG("%s, bogus device state\n", __FUNCTION__);
++		return -ESHUTDOWN;
++	}
++
++	max = le16_to_cpu(desc->wMaxPacketSize);
++
++	spin_lock_irqsave(&ep->dev->lock, flags);
++
++	/* Configure the endpoint */
++	jz_udc_select_ep(ep);
++	if (ep_is_in(ep)) {
++		usb_writew(dev, JZ_REG_UDC_INMAXP, max);
++		switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++		case USB_ENDPOINT_XFER_BULK:
++		case USB_ENDPOINT_XFER_INT:
++			csrh &= ~USB_INCSRH_ISO;
++			break;
++		case USB_ENDPOINT_XFER_ISOC:
++			csrh |= USB_INCSRH_ISO;
++			break;
++		}
++		usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh);
++	}
++	else {
++		usb_writew(dev, JZ_REG_UDC_OUTMAXP, max);
++		switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++		case USB_ENDPOINT_XFER_BULK:
++			 csrh &= ~USB_OUTCSRH_ISO;
++			break;
++		case USB_ENDPOINT_XFER_INT:
++			csrh &= ~USB_OUTCSRH_ISO;
++			csrh |= USB_OUTCSRH_DNYT;
++			break;
++		case USB_ENDPOINT_XFER_ISOC:
++			csrh |= USB_OUTCSRH_ISO;
++			break;
++		}
++		usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh);
++	}
++
++
++	ep->stopped = 0;
++	ep->desc = desc;
++	ep->ep.maxpacket = max;
++
++	spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++	/* Reset halt state (does flush) */
++	jz4740_set_halt(_ep, 0);
++
++	DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
++
++	return 0;
++}
++
++/** Disable EP
++ *  NOTE: Sets INDEX register
++ */
++static int jz4740_ep_disable(struct usb_ep *_ep)
++{
++	struct jz4740_ep *ep;
++	unsigned long flags;
++
++	DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (!_ep || !ep->desc) {
++		DEBUG("%s, %s not enabled\n", __FUNCTION__,
++		      _ep ? ep->ep.name : NULL);
++		return -EINVAL;
++	}
++
++	spin_lock_irqsave(&ep->dev->lock, flags);
++
++	jz_udc_select_ep(ep);
++
++	/* Nuke all pending requests (does flush) */
++	nuke(ep, -ESHUTDOWN);
++
++	/* Disable ep IRQ */
++	pio_irq_disable(ep);
++
++	ep->desc = 0;
++	ep->stopped = 1;
++
++	spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++	DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
++	return 0;
++}
++
++static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
++{
++	struct jz4740_request *req;
++
++	req = kzalloc(sizeof(*req), gfp_flags);
++	if (!req)
++		return NULL;
++
++	INIT_LIST_HEAD(&req->queue);
++
++	return &req->req;
++}
++
++static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req)
++{
++	struct jz4740_request *req;
++
++	req = container_of(_req, struct jz4740_request, req);
++	WARN_ON(!list_empty(&req->queue));
++
++	kfree(req);
++}
++
++/*--------------------------------------------------------------------*/
++
++/** Queue one request
++ *  Kickstart transfer if needed
++ *  NOTE: Sets INDEX register
++ */
++static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req,
++			gfp_t gfp_flags)
++{
++	struct jz4740_request *req;
++	struct jz4740_ep *ep;
++	struct jz4740_udc *dev;
++
++	DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++	req = container_of(_req, struct jz4740_request, req);
++	if (unlikely
++	    (!_req || !_req->complete || !_req->buf
++	     || !list_empty(&req->queue))) {
++		DEBUG("%s, bad params\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
++		DEBUG("%s, bad ep\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	dev = ep->dev;
++	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
++		DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
++		return -ESHUTDOWN;
++	}
++
++	DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
++	      _req->buf);
++
++	spin_lock_irqsave(&dev->lock, dev->lock_flags);
++
++	_req->status = -EINPROGRESS;
++	_req->actual = 0;
++
++	/* kickstart this i/o queue? */
++	DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
++	      ep->stopped);
++	if (list_empty(&ep->queue) && likely(!ep->stopped)) {
++		uint32_t csr;
++
++		if (unlikely(ep_index(ep) == 0)) {
++			/* EP0 */
++			list_add_tail(&req->queue, &ep->queue);
++			jz4740_ep0_kick(dev, ep);
++			req = 0;
++		}
++		else if (ep_is_in(ep)) {
++			/* EP1 & EP2 */
++			jz_udc_select_ep(ep);
++			csr = usb_readb(dev, ep->csr);
++			pio_irq_enable(ep);
++			if (!(csr & USB_INCSR_FFNOTEMPT)) {
++				if (write_fifo(ep, req) == 1)
++					req = 0;
++			}
++		} else {
++			/* EP1 */
++			jz_udc_select_ep(ep);
++			csr = usb_readb(dev, ep->csr);
++			pio_irq_enable(ep);
++			if (csr & USB_OUTCSR_OUTPKTRDY) {
++				if (read_fifo(ep, req) == 1)
++					req = 0;
++			}
++		}
++	}
++
++	/* pio or dma irq handler advances the queue. */
++	if (likely(req != 0))
++		list_add_tail(&req->queue, &ep->queue);
++
++	spin_unlock_irqrestore(&dev->lock, dev->lock_flags);
++
++	return 0;
++}
++
++/* dequeue JUST ONE request */
++static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct jz4740_ep *ep;
++	struct jz4740_request *req;
++	unsigned long flags;
++
++	DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (!_ep || ep->type == ep_control)
++		return -EINVAL;
++
++	spin_lock_irqsave(&ep->dev->lock, flags);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry(req, &ep->queue, queue) {
++		if (&req->req == _req)
++			break;
++	}
++	if (&req->req != _req) {
++		spin_unlock_irqrestore(&ep->dev->lock, flags);
++		return -EINVAL;
++	}
++	done(ep, req, -ECONNRESET);
++
++	spin_unlock_irqrestore(&ep->dev->lock, flags);
++	return 0;
++}
++
++/** Return bytes in EP FIFO
++ *  NOTE: Sets INDEX register to EP
++ */
++static int jz4740_fifo_status(struct usb_ep *_ep)
++{
++	uint32_t csr;
++	int count = 0;
++	struct jz4740_ep *ep;
++	unsigned long flags;
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (!_ep) {
++		DEBUG("%s, bad ep\n", __FUNCTION__);
++		return -ENODEV;
++	}
++
++	DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
++
++	/* LPD can't report unclaimed bytes from IN fifos */
++	if (ep_is_in(ep))
++		return -EOPNOTSUPP;
++
++	spin_lock_irqsave(&ep->dev->lock, flags);
++	jz_udc_select_ep(ep);
++
++	csr = usb_readb(ep->dev, ep->csr);
++	if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
++	    csr & 0x1) {
++		count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
++	}
++
++	spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++	return count;
++}
++
++/** Flush EP FIFO
++ *  NOTE: Sets INDEX register to EP
++ */
++static void jz4740_fifo_flush(struct usb_ep *_ep)
++{
++	struct jz4740_ep *ep;
++	unsigned long flags;
++
++	DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	ep = container_of(_ep, struct jz4740_ep, ep);
++	if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) {
++		DEBUG("%s, bad ep\n", __FUNCTION__);
++		return;
++	}
++
++	spin_lock_irqsave(&ep->dev->lock, flags);
++
++	jz_udc_select_ep(ep);
++	flush(ep);
++
++	spin_unlock_irqrestore(&ep->dev->lock, flags);
++}
++
++/****************************************************************/
++/* End Point 0 related functions                                */
++/****************************************************************/
++
++/* return:  0 = still running, 1 = completed, negative = errno */
++static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++	uint32_t max;
++	unsigned count;
++	int is_last;
++
++    DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++	max = ep_maxpacket(ep);
++
++	count = write_packet(ep, req, max);
++
++	/* last packet is usually short (or a zlp) */
++	if (unlikely(count != max))
++		is_last = 1;
++	else {
++		if (likely(req->req.length != req->req.actual) || req->req.zero)
++			is_last = 0;
++		else
++			is_last = 1;
++	}
++
++	DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
++		  ep->ep.name, count,
++		  is_last ? "/L" : "", req->req.length - req->req.actual, req);
++
++	/* requests complete when all IN data is in the FIFO */
++	if (is_last) {
++		done(ep, req, 0);
++		return 1;
++	}
++
++	return 0;
++}
++
++static inline int jz4740_fifo_read(struct jz4740_ep *ep,
++				       unsigned char *cp, int max)
++{
++	int bytes;
++	int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
++
++	if (count > max)
++		count = max;
++	bytes = count;
++	while (count--)
++		*cp++ = usb_readb(ep->dev, ep->fifo);
++
++	return bytes;
++}
++
++static inline void jz4740_fifo_write(struct jz4740_ep *ep,
++					 unsigned char *cp, int count)
++{
++	DEBUG("fifo_write: %d %d\n", ep_index(ep), count);
++	while (count--)
++		usb_writeb(ep->dev, ep->fifo, *cp++);
++}
++
++static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++	struct jz4740_udc *dev = ep->dev;
++	uint32_t csr;
++	uint8_t *buf;
++	unsigned bufferspace, count, is_short;
++
++	DEBUG_EP0("%s\n", __FUNCTION__);
++
++	csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++	if (!(csr & USB_CSR0_OUTPKTRDY))
++		return 0;
++
++	buf = req->req.buf + req->req.actual;
++	prefetchw(buf);
++	bufferspace = req->req.length - req->req.actual;
++
++	/* read all bytes from this packet */
++	if (likely(csr & USB_CSR0_OUTPKTRDY)) {
++		count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
++		req->req.actual += min(count, bufferspace);
++	} else			/* zlp */
++		count = 0;
++
++	is_short = (count < ep->ep.maxpacket);
++	DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
++		  ep->ep.name, csr, count,
++		  is_short ? "/S" : "", req, req->req.actual, req->req.length);
++
++	while (likely(count-- != 0)) {
++		uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo);
++
++		if (unlikely(bufferspace == 0)) {
++			/* this happens when the driver's buffer
++			 * is smaller than what the host sent.
++			 * discard the extra data.
++			 */
++			if (req->req.status != -EOVERFLOW)
++				DEBUG_EP0("%s overflow %d\n", ep->ep.name,
++					  count);
++			req->req.status = -EOVERFLOW;
++		} else {
++			*buf++ = byte;
++			bufferspace--;
++		}
++	}
++
++	/* completion */
++	if (is_short || req->req.actual == req->req.length) {
++		done(ep, req, 0);
++		return 1;
++	}
++
++	/* finished that packet.  the next one may be waiting... */
++	return 0;
++}
++
++/**
++ * udc_set_address - set the USB address for this device
++ * @address:
++ *
++ * Called from control endpoint function after it decodes a set address setup packet.
++ */
++static void udc_set_address(struct jz4740_udc *dev, unsigned char address)
++{
++	DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
++
++	usb_writeb(dev, JZ_REG_UDC_FADDR, address);
++}
++
++/*
++ * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY)
++ *      - if error
++ *              set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
++ *      - else
++ *              set USB_CSR0_SVDOUTPKTRDY bit
++ 				if last set USB_CSR0_DATAEND bit
++ */
++static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart)
++{
++	struct jz4740_request *req;
++	struct jz4740_ep *ep = &dev->ep[0];
++	int ret;
++
++	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++	if (list_empty(&ep->queue))
++		req = 0;
++	else
++		req = list_entry(ep->queue.next, struct jz4740_request, queue);
++
++	if (req) {
++		if (req->req.length == 0) {
++			DEBUG_EP0("ZERO LENGTH OUT!\n");
++			usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++			dev->ep0state = WAIT_FOR_SETUP;
++			return;
++		} else if (kickstart) {
++			usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY));
++			return;
++		}
++		ret = read_fifo_ep0(ep, req);
++		if (ret) {
++			/* Done! */
++			DEBUG_EP0("%s: finished, waiting for status\n",
++				  __FUNCTION__);
++			usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++			dev->ep0state = WAIT_FOR_SETUP;
++		} else {
++			/* Not done yet.. */
++			DEBUG_EP0("%s: not finished\n", __FUNCTION__);
++			usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++		}
++	} else {
++		DEBUG_EP0("NO REQ??!\n");
++	}
++}
++
++/*
++ * DATA_STATE_XMIT
++ */
++static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr)
++{
++	struct jz4740_request *req;
++	struct jz4740_ep *ep = &dev->ep[0];
++	int ret, need_zlp = 0;
++
++	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++	if (list_empty(&ep->queue))
++		req = 0;
++	else
++		req = list_entry(ep->queue.next, struct jz4740_request, queue);
++
++	if (!req) {
++		DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
++		return 0;
++	}
++
++	if (req->req.length == 0) {
++		usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++		dev->ep0state = WAIT_FOR_SETUP;
++		return 1;
++	}
++
++	if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) {
++		/* Next write will end with the packet size, */
++		/* so we need zero-length-packet */
++		need_zlp = 1;
++	}
++
++	ret = write_fifo_ep0(ep, req);
++
++	if (ret == 1 && !need_zlp) {
++		/* Last packet */
++		DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
++
++		usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++		dev->ep0state = WAIT_FOR_SETUP;
++	} else {
++		DEBUG_EP0("%s: not finished\n", __FUNCTION__);
++		usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
++	}
++
++	if (need_zlp) {
++		DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
++		usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
++		dev->ep0state = DATA_STATE_NEED_ZLP;
++	}
++
++	return 1;
++}
++
++static int jz4740_handle_get_status(struct jz4740_udc *dev,
++				    struct usb_ctrlrequest *ctrl)
++{
++	struct jz4740_ep *ep0 = &dev->ep[0];
++	struct jz4740_ep *qep;
++	int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
++	uint16_t val = 0;
++
++    DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++	if (reqtype == USB_RECIP_INTERFACE) {
++		/* This is not supported.
++		 * And according to the USB spec, this one does nothing..
++		 * Just return 0
++		 */
++		DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
++	} else if (reqtype == USB_RECIP_DEVICE) {
++		DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
++		val |= (1 << 0);	/* Self powered */
++		/*val |= (1<<1); *//* Remote wakeup */
++	} else if (reqtype == USB_RECIP_ENDPOINT) {
++		int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
++
++		DEBUG_SETUP
++			("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
++			 ep_num, ctrl->wLength);
++
++		if (ctrl->wLength > 2 || ep_num > 3)
++			return -EOPNOTSUPP;
++
++		qep = &dev->ep[ep_num];
++		if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
++		    && ep_index(qep) != 0) {
++			return -EOPNOTSUPP;
++		}
++
++		jz_udc_select_ep(qep);
++
++		/* Return status on next IN token */
++		switch (qep->type) {
++		case ep_control:
++			val =
++			    (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) ==
++			    USB_CSR0_SENDSTALL;
++			break;
++		case ep_bulk_in:
++		case ep_interrupt:
++			val =
++			    (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) ==
++			    USB_INCSR_SENDSTALL;
++			break;
++		case ep_bulk_out:
++			val =
++			    (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) ==
++			    USB_OUTCSR_SENDSTALL;
++			break;
++		}
++
++		/* Back to EP0 index */
++		jz_udc_set_index(dev, 0);
++
++		DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
++			    ctrl->wIndex, val);
++	} else {
++		DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
++		return -EOPNOTSUPP;
++	}
++
++	/* Clear "out packet ready" */
++	usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++	/* Put status to FIFO */
++	jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val));
++	/* Issue "In packet ready" */
++	usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++
++	return 0;
++}
++
++/*
++ * WAIT_FOR_SETUP (OUTPKTRDY)
++ *      - read data packet from EP0 FIFO
++ *      - decode command
++ *      - if error
++ *              set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
++ *      - else
++ *              set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits
++ */
++static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr)
++{
++	struct jz4740_ep *ep = &dev->ep[0];
++	struct usb_ctrlrequest ctrl;
++	int i;
++
++	DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
++
++	/* Nuke all previous transfers */
++	nuke(ep, -EPROTO);
++
++	/* read control req from fifo (8 bytes) */
++	jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8);
++
++	DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bRequestType, ctrl.bRequest,
++		    ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++	/* Set direction of EP0 */
++	if (likely(ctrl.bRequestType & USB_DIR_IN)) {
++		ep->bEndpointAddress |= USB_DIR_IN;
++	} else {
++		ep->bEndpointAddress &= ~USB_DIR_IN;
++	}
++
++	/* Handle some SETUP packets ourselves */
++	switch (ctrl.bRequest) {
++	case USB_REQ_SET_ADDRESS:
++		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++			break;
++
++		DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
++		udc_set_address(dev, ctrl.wValue);
++		usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++		return;
++
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++			break;
++
++		DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
++/*		usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
++
++		/* Enable RESUME and SUSPEND interrupts */
++		usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND));
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++			break;
++
++		DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
++/*		usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
++		break;
++
++	case USB_REQ_GET_STATUS:
++		if (jz4740_handle_get_status(dev, &ctrl) == 0)
++			return;
++
++	case USB_REQ_CLEAR_FEATURE:
++	case USB_REQ_SET_FEATURE:
++		if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
++			struct jz4740_ep *qep;
++			int ep_num = (ctrl.wIndex & 0x0f);
++
++			/* Support only HALT feature */
++			if (ctrl.wValue != 0 || ctrl.wLength != 0
++			    || ep_num > 3 || ep_num < 1)
++				break;
++
++			qep = &dev->ep[ep_num];
++			spin_unlock(&dev->lock);
++			if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
++				DEBUG_SETUP("SET_FEATURE (%d)\n",
++					    ep_num);
++				jz4740_set_halt(&qep->ep, 1);
++			} else {
++				DEBUG_SETUP("CLR_FEATURE (%d)\n",
++					    ep_num);
++				jz4740_set_halt(&qep->ep, 0);
++			}
++			spin_lock(&dev->lock);
++
++			jz_udc_set_index(dev, 0);
++
++			/* Reply with a ZLP on next IN token */
++			usb_setb(dev, JZ_REG_UDC_CSR0,
++				 (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++			return;
++		}
++		break;
++
++	default:
++		break;
++	}
++
++	/* gadget drivers see class/vendor specific requests,
++	 * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
++	 * and more.
++	 */
++	if (dev->driver) {
++		/* device-2-host (IN) or no data setup command, process immediately */
++		spin_unlock(&dev->lock);
++
++		i = dev->driver->setup(&dev->gadget, &ctrl);
++		spin_lock(&dev->lock);
++
++		if (unlikely(i < 0)) {
++			/* setup processing failed, force stall */
++			DEBUG_SETUP
++			    ("  --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
++			     i);
++			jz_udc_set_index(dev, 0);
++			usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL));
++
++			/* ep->stopped = 1; */
++			dev->ep0state = WAIT_FOR_SETUP;
++		}
++		else {
++			DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength);
++/*			if (!ctrl.wLength) {
++				usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++			}*/
++		}
++	}
++}
++
++/*
++ * DATA_STATE_NEED_ZLP
++ */
++static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr)
++{
++	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++	usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++	dev->ep0state = WAIT_FOR_SETUP;
++}
++
++/*
++ * handle ep0 interrupt
++ */
++static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr)
++{
++	struct jz4740_ep *ep = &dev->ep[0];
++	uint32_t csr;
++
++    DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++	/* Set index 0 */
++	jz_udc_set_index(dev, 0);
++	csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++
++	DEBUG_EP0("%s: csr = %x  state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]);
++
++	/*
++	 * if SENT_STALL is set
++	 *      - clear the SENT_STALL bit
++	 */
++	if (csr & USB_CSR0_SENTSTALL) {
++		DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr);
++		usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL);
++		nuke(ep, -ECONNABORTED);
++		dev->ep0state = WAIT_FOR_SETUP;
++		return;
++	}
++
++	/*
++	 * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear
++	 *      - fill EP0 FIFO
++	 *      - if last packet
++	 *      -       set IN_PKT_RDY | DATA_END
++	 *      - else
++	 *              set IN_PKT_RDY
++	 */
++	if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) {
++		DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n",
++			  __FUNCTION__);
++
++		switch (dev->ep0state) {
++		case DATA_STATE_XMIT:
++			DEBUG_EP0("continue with DATA_STATE_XMIT\n");
++			jz4740_ep0_in(dev, csr);
++			return;
++		case DATA_STATE_NEED_ZLP:
++			DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
++			jz4740_ep0_in_zlp(dev, csr);
++			return;
++		default:
++			/* Stall? */
++//			DEBUG_EP0("Odd state!! state = %s\n",
++//				  state_names[dev->ep0state]);
++			dev->ep0state = WAIT_FOR_SETUP;
++			/* nuke(ep, 0); */
++			/* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */
++//			break;
++			return;
++		}
++	}
++
++	/*
++	 * if SETUPEND is set
++	 *      - abort the last transfer
++	 *      - set SERVICED_SETUP_END_BIT
++	 */
++	if (csr & USB_CSR0_SETUPEND) {
++		DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr);
++
++		usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND);
++		nuke(ep, 0);
++		dev->ep0state = WAIT_FOR_SETUP;
++	}
++
++	/*
++	 * if USB_CSR0_OUTPKTRDY is set
++	 *      - read data packet from EP0 FIFO
++	 *      - decode command
++	 *      - if error
++	 *              set SVDOUTPKTRDY | DATAEND | SENDSTALL bits
++	 *      - else
++	 *              set SVDOUTPKTRDY | DATAEND bits
++	 */
++	if (csr & USB_CSR0_OUTPKTRDY) {
++
++		DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
++			  csr);
++
++		switch (dev->ep0state) {
++		case WAIT_FOR_SETUP:
++			DEBUG_EP0("WAIT_FOR_SETUP\n");
++			jz4740_ep0_setup(dev, csr);
++			break;
++
++		case DATA_STATE_RECV:
++			DEBUG_EP0("DATA_STATE_RECV\n");
++			jz4740_ep0_out(dev, csr, 0);
++			break;
++
++		default:
++			/* send stall? */
++			DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
++				  dev->ep0state);
++			break;
++		}
++	}
++}
++
++static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep)
++{
++	uint32_t csr;
++
++	jz_udc_set_index(dev, 0);
++
++	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++	/* Clear "out packet ready" */
++
++	if (ep_is_in(ep)) {
++		usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++		csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++		dev->ep0state = DATA_STATE_XMIT;
++		jz4740_ep0_in(dev, csr);
++	} else {
++		csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++		dev->ep0state = DATA_STATE_RECV;
++		jz4740_ep0_out(dev, csr, 1);
++	}
++}
++
++/** Handle USB RESET interrupt
++ */
++static void jz4740_reset_irq(struct jz4740_udc *dev)
++{
++	dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ?
++		USB_SPEED_HIGH : USB_SPEED_FULL;
++
++	DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0,
++		    (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" );
++}
++
++/*
++ *	jz4740 usb device interrupt handler.
++ */
++static irqreturn_t jz4740_udc_irq(int irq, void *devid)
++{
++	struct jz4740_udc *jz4740_udc = devid;
++	uint8_t index;
++
++	uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */
++	uint32_t intr_in  = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN);
++	uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT);
++	uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR);
++
++	if (!intr_usb && !intr_in && !intr_out && !intr_dma)
++		return IRQ_HANDLED;
++
++
++	DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n",
++	      intr_out, intr_in, intr_usb);
++
++	spin_lock(&jz4740_udc->lock);
++	index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX);
++
++	/* Check for resume from suspend mode */
++	if ((intr_usb & USB_INTR_RESUME) &&
++	    (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) {
++		DEBUG("USB resume\n");
++		jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */
++	}
++
++	/* Check for system interrupts */
++	if (intr_usb & USB_INTR_RESET) {
++		DEBUG("USB reset\n");
++		jz4740_reset_irq(jz4740_udc);
++	}
++
++	/* Check for endpoint 0 interrupt */
++	if (intr_in & USB_INTR_EP0) {
++		DEBUG("USB_INTR_EP0 (control)\n");
++		jz4740_handle_ep0(jz4740_udc, intr_in);
++	}
++
++	/* Check for Bulk-IN DMA interrupt */
++	if (intr_dma & 0x1) {
++		int ep_num;
++		struct jz4740_ep *ep;
++		ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf;
++		ep = &jz4740_udc->ep[ep_num + 1];
++		jz_udc_select_ep(ep);
++		usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY);
++/*		jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/
++	}
++
++	/* Check for Bulk-OUT DMA interrupt */
++	if (intr_dma & 0x2) {
++		int ep_num;
++		ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf;
++		jz4740_out_epn(jz4740_udc, ep_num, intr_out);
++	}
++
++	/* Check for each configured endpoint interrupt */
++	if (intr_in & USB_INTR_INEP1) {
++		DEBUG("USB_INTR_INEP1\n");
++		jz4740_in_epn(jz4740_udc, 1, intr_in);
++	}
++
++	if (intr_in & USB_INTR_INEP2) {
++		DEBUG("USB_INTR_INEP2\n");
++		jz4740_in_epn(jz4740_udc, 2, intr_in);
++	}
++
++	if (intr_out & USB_INTR_OUTEP1) {
++		DEBUG("USB_INTR_OUTEP1\n");
++		jz4740_out_epn(jz4740_udc, 1, intr_out);
++	}
++
++	/* Check for suspend mode */
++	if ((intr_usb & USB_INTR_SUSPEND) &&
++	    (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) {
++		DEBUG("USB suspend\n");
++		jz4740_udc->driver->suspend(&jz4740_udc->gadget);
++		/* Host unloaded from us, can do something, such as flushing
++		 the NAND block cache etc. */
++	}
++
++    jz_udc_set_index(jz4740_udc, index);
++
++	spin_unlock(&jz4740_udc->lock);
++
++	return IRQ_HANDLED;
++}
++
++
++
++/*-------------------------------------------------------------------------*/
++
++
++static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget)
++{
++	return container_of(gadget, struct jz4740_udc, gadget);
++}
++
++static int jz4740_udc_get_frame(struct usb_gadget *_gadget)
++{
++	DEBUG("%s, %p\n", __FUNCTION__, _gadget);
++	return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME);
++}
++
++static int jz4740_udc_wakeup(struct usb_gadget *_gadget)
++{
++	/* host may not have enabled remote wakeup */
++	/*if ((UDCCS0 & UDCCS0_DRWF) == 0)
++	   return -EHOSTUNREACH;
++	   udc_set_mask_UDCCR(UDCCR_RSM); */
++	return -ENOTSUPP;
++}
++
++static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on)
++{
++	struct jz4740_udc *udc = gadget_to_udc(_gadget);
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	if (on) {
++		udc->state = UDC_STATE_ENABLE;
++		udc_enable(udc);
++	} else {
++		udc->state = UDC_STATE_DISABLE;
++		udc_disable(udc);
++	}
++
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++
++static const struct usb_gadget_ops jz4740_udc_ops = {
++	.get_frame = jz4740_udc_get_frame,
++	.wakeup = jz4740_udc_wakeup,
++	.pullup = jz4740_udc_pullup,
++	.start = jz4740_udc_start,
++	.stop = jz4740_udc_stop,
++};
++
++static struct usb_ep_ops jz4740_ep_ops = {
++	.enable		= jz4740_ep_enable,
++	.disable	= jz4740_ep_disable,
++
++	.alloc_request	= jz4740_alloc_request,
++	.free_request	= jz4740_free_request,
++
++	.queue		= jz4740_queue,
++	.dequeue	= jz4740_dequeue,
++
++	.set_halt	= jz4740_set_halt,
++	.fifo_status	= jz4740_fifo_status,
++	.fifo_flush	= jz4740_fifo_flush,
++};
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct jz4740_udc jz4740_udc_controller = {
++	.gadget = {
++		.ops = &jz4740_udc_ops,
++		.ep0 = &jz4740_udc_controller.ep[0].ep,
++		.name = "jz4740-udc",
++		.dev = {
++			.init_name = "gadget",
++		},
++	},
++
++	/* control endpoint */
++	.ep[0] = {
++		.ep = {
++			.name = "ep0",
++			.ops = &jz4740_ep_ops,
++			.maxpacket = EP0_MAXPACKETSIZE,
++		},
++		.dev = &jz4740_udc_controller,
++
++		.bEndpointAddress = 0,
++		.bmAttributes = 0,
++
++		.type = ep_control,
++		.fifo = JZ_REG_UDC_EP_FIFO(0),
++		.csr = JZ_REG_UDC_CSR0,
++	},
++
++	/* bulk out endpoint */
++	.ep[1] = {
++		.ep = {
++			.name = "ep1out-bulk",
++			.ops = &jz4740_ep_ops,
++			.maxpacket = EPBULK_MAXPACKETSIZE,
++		},
++		.dev = &jz4740_udc_controller,
++
++		.bEndpointAddress = 1,
++		.bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++		.type = ep_bulk_out,
++		.fifo = JZ_REG_UDC_EP_FIFO(1),
++		.csr = JZ_REG_UDC_OUTCSR,
++	},
++
++	/* bulk in endpoint */
++	.ep[2] = {
++		.ep = {
++			.name = "ep1in-bulk",
++			.ops = &jz4740_ep_ops,
++			.maxpacket = EPBULK_MAXPACKETSIZE,
++		},
++		.dev = &jz4740_udc_controller,
++
++		.bEndpointAddress = 1 | USB_DIR_IN,
++		.bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++		.type = ep_bulk_in,
++		.fifo = JZ_REG_UDC_EP_FIFO(1),
++		.csr = JZ_REG_UDC_INCSR,
++	},
++
++	/* interrupt in endpoint */
++	.ep[3] = {
++		.ep = {
++			.name = "ep2in-int",
++			.ops = &jz4740_ep_ops,
++			.maxpacket = EPINTR_MAXPACKETSIZE,
++		},
++		.dev = &jz4740_udc_controller,
++
++		.bEndpointAddress = 2 | USB_DIR_IN,
++		.bmAttributes = USB_ENDPOINT_XFER_INT,
++
++		.type = ep_interrupt,
++		.fifo = JZ_REG_UDC_EP_FIFO(2),
++		.csr = JZ_REG_UDC_INCSR,
++	},
++};
++
++static int __devinit jz4740_udc_probe(struct platform_device *pdev)
++{
++	struct jz4740_udc *jz4740_udc = &jz4740_udc_controller;
++	int ret;
++
++	spin_lock_init(&jz4740_udc->lock);
++
++	jz4740_udc->dev = &pdev->dev;
++	jz4740_udc->gadget.dev.parent = &pdev->dev;
++	jz4740_udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++	ret = device_register(&jz4740_udc->gadget.dev);
++	if (ret)
++		return ret;
++
++	jz4740_udc->clk = clk_get(&pdev->dev, "udc");
++	if (IS_ERR(jz4740_udc->clk)) {
++		ret = PTR_ERR(jz4740_udc->clk);
++		dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret);
++		goto err_device_unregister;
++	}
++
++	platform_set_drvdata(pdev, jz4740_udc);
++
++	jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++	if (!jz4740_udc->mem) {
++		ret = -ENOENT;
++		dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
++		goto err_clk_put;
++	}
++
++	jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start,
++	resource_size(jz4740_udc->mem), pdev->name);
++
++	if (!jz4740_udc->mem) {
++		ret = -EBUSY;
++		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
++		goto err_device_unregister;
++	}
++
++	jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
++
++	if (!jz4740_udc->base) {
++		ret = -EBUSY;
++		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
++		goto err_release_mem_region;
++	}
++
++	jz4740_udc->irq = platform_get_irq(pdev, 0);
++	ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name,
++	jz4740_udc);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
++		goto err_iounmap;
++	}
++
++	ret = usb_add_gadget_udc(&pdev->dev, &jz4740_udc->gadget);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to add gadget: %d\n", ret);
++		goto err_free_irq;
++	}
++
++	udc_disable(jz4740_udc);
++	udc_reinit(jz4740_udc);
++
++	return 0;
++
++err_free_irq:
++	free_irq(jz4740_udc->irq, pdev);
++err_iounmap:
++	iounmap(jz4740_udc->base);
++err_release_mem_region:
++	release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
++err_clk_put:
++	clk_put(jz4740_udc->clk);
++err_device_unregister:
++	device_unregister(&jz4740_udc->gadget.dev);
++	platform_set_drvdata(pdev, NULL);
++
++	return ret;
++}
++
++static int __devexit jz4740_udc_remove(struct platform_device *pdev)
++{
++	struct jz4740_udc *dev = platform_get_drvdata(pdev);
++
++	usb_del_gadget_udc(&dev->gadget);
++	if (dev->driver)
++		return -EBUSY;
++
++	udc_disable(dev);
++
++	free_irq(dev->irq, dev);
++	iounmap(dev->base);
++	release_mem_region(dev->mem->start, resource_size(dev->mem));
++	clk_put(dev->clk);
++
++	platform_set_drvdata(pdev, NULL);
++	device_unregister(&dev->gadget.dev);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int jz4740_udc_suspend(struct device *dev)
++{
++	struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
++
++	if (jz4740_udc->state == UDC_STATE_ENABLE)
++		udc_disable(jz4740_udc);
++
++	return 0;
++}
++
++static int jz4740_udc_resume(struct device *dev)
++{
++	struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
++
++	if (jz4740_udc->state == UDC_STATE_ENABLE)
++		udc_enable(jz4740_udc);
++
++	return 0;
++}
++
++static SIMPLE_DEV_PM_OPS(jz4740_udc_pm_ops, jz4740_udc_suspend, jz4740_udc_resume);
++#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops)
++
++#else
++#define JZ4740_UDC_PM_OPS NULL
++#endif
++
++static struct platform_driver udc_driver = {
++	.probe		= jz4740_udc_probe,
++	.remove		= __devexit_p(jz4740_udc_remove),
++	.driver		= {
++		.name	= "jz-udc",
++		.owner	= THIS_MODULE,
++		.pm		= JZ4740_UDC_PM_OPS,
++	},
++};
++
++/*-------------------------------------------------------------------------*/
++
++static int __init udc_init (void)
++{
++	return platform_driver_register(&udc_driver);
++}
++module_init(udc_init);
++
++static void __exit udc_exit (void)
++{
++	platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("JZ4740 USB Device Controller");
++MODULE_AUTHOR("Wei Jianli <jlwei@ingenic.cn>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/usb/gadget/jz4740_udc.h b/drivers/usb/gadget/jz4740_udc.h
+new file mode 100644
+index 0000000..53fd1da
+--- /dev/null
++++ b/drivers/usb/gadget/jz4740_udc.h
+@@ -0,0 +1,101 @@
++/*
++ * linux/drivers/usb/gadget/jz4740_udc.h
++ *
++ * Ingenic JZ4740 on-chip high speed USB device controller
++ *
++ * Copyright (C) 2006 Ingenic Semiconductor Inc.
++ * Author: <jlwei@ingenic.cn>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef __USB_GADGET_JZ4740_H__
++#define __USB_GADGET_JZ4740_H__
++
++/*-------------------------------------------------------------------------*/
++
++// Max packet size
++#define EP0_MAXPACKETSIZE  	64
++#define EPBULK_MAXPACKETSIZE  	512
++#define EPINTR_MAXPACKETSIZE  	64
++
++#define UDC_MAX_ENDPOINTS       4
++
++/*-------------------------------------------------------------------------*/
++
++enum ep_type {
++	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
++};
++
++struct jz4740_ep {
++	struct usb_ep ep;
++	struct jz4740_udc *dev;
++
++	const struct usb_endpoint_descriptor *desc;
++
++	uint8_t stopped;
++	uint8_t bEndpointAddress;
++	uint8_t bmAttributes;
++
++	enum ep_type type;
++	size_t fifo;
++	uint32_t csr;
++
++	uint32_t reg_addr;
++	struct list_head queue;
++};
++
++struct jz4740_request {
++	struct usb_request req;
++	struct list_head queue;
++};
++
++enum ep0state {
++	WAIT_FOR_SETUP,		/* between STATUS ack and SETUP report */
++	DATA_STATE_XMIT, 	/* data tx stage */
++	DATA_STATE_NEED_ZLP,	/* data tx zlp stage */
++	WAIT_FOR_OUT_STATUS,	/* status stages */
++	DATA_STATE_RECV,	/* data rx stage */
++};
++
++/* For function binding with UDC Disable - Added by River */
++typedef enum {
++	UDC_STATE_ENABLE = 0,
++	UDC_STATE_DISABLE,
++}udc_state_t;
++
++struct jz4740_udc {
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++	struct device *dev;
++	spinlock_t lock;
++	unsigned long lock_flags;
++
++	enum ep0state ep0state;
++	struct jz4740_ep ep[UDC_MAX_ENDPOINTS];
++
++	udc_state_t state;
++
++	struct resource *mem;
++	void __iomem *base;
++	int irq;
++
++	struct clk *clk;
++};
++
++#define ep_maxpacket(EP) 	((EP)->ep.maxpacket)
++
++static inline bool ep_is_in(const struct jz4740_ep *ep)
++{
++	return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN;
++}
++
++static inline uint8_t ep_index(const struct jz4740_ep *ep)
++{
++	return ep->bEndpointAddress & 0xf;
++}
++
++#endif /* __USB_GADGET_JZ4740_H__ */
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.2/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
new file mode 100644
index 0000000..b92c967
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
@@ -0,0 +1,45 @@
+From b971c50dc50c07f981a1619f977e7509db9c4eac Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 26 Feb 2011 15:30:07 +0100
+Subject: [PATCH 03/21] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
+
+Avoid sending unnecessary READ commands to the chip.
+---
+ drivers/mtd/nand/nand_base.c |   14 ++++++++++----
+ 1 files changed, 10 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 3ed9c5e..184aa93 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1294,9 +1294,15 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ 	uint8_t *ecc_calc = chip->buffers->ecccalc;
+ 
+ 	/* Read the OOB area first */
+-	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
++	if (mtd->writesize > 512) {
++		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
++		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
++	} else {
++		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
++	}
+ 
+ 	for (i = 0; i < chip->ecc.total; i++)
+ 		ecc_code[i] = chip->oob_poi[eccpos[i]];
+@@ -1465,7 +1471,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ 		if (realpage != chip->pagebuf || oob) {
+ 			bufpoi = aligned ? buf : chip->buffers->databuf;
+ 
+-			if (likely(sndcmd)) {
++			if (likely(sndcmd) && chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) {
+ 				chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ 				sndcmd = 0;
+ 			}
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.2/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
new file mode 100644
index 0000000..aab8f04
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
@@ -0,0 +1,151 @@
+From 297d8a7bdfb755778d4189ca2861dd2a6125e972 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 15 Mar 2011 12:33:41 +0100
+Subject: [PATCH 04/21] NAND: Add support for subpage reads for
+ NAND_ECC_HW_OOB_FIRST
+
+---
+ drivers/mtd/nand/nand_base.c |   78 ++++++++++++++++++++++++++++++++++++++++--
+ include/linux/mtd/nand.h     |    8 ++--
+ 2 files changed, 79 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 184aa93..0131e84 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1143,7 +1143,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+  * @bufpoi: buffer to store read data
+  */
+ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+-			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
++			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
+ {
+ 	int start_step, end_step, num_steps;
+ 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+@@ -1324,6 +1324,75 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ }
+ 
+ /**
++ * nand_read_subpage_hwecc_oob_first - [REPLACABLE] hw ecc based sub-page read function
++ * @mtd:	mtd info structure
++ * @chip:	nand chip info structure
++ * @data_offs:	offset of requested data within the page
++ * @readlen:	data length
++ * @bufpoi:	buffer to store read data
++ * @page:	page number to read
++ *
++ * Hardware ECC for large page chips, require OOB to be read first.
++ * For this ECC mode, the write_page method is re-used from ECC_HW.
++ * These methods read/write ECC from the OOB area, unlike the
++ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
++ * "infix ECC" scheme and reads/writes ECC from the data area, by
++ * overwriting the NAND manufacturer bad block markings.
++ */
++static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip,
++			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
++{
++	int start_step, end_step, num_steps;
++	uint32_t *eccpos = chip->ecc.layout->eccpos;
++	uint8_t *p;
++	int data_col_addr;
++	int eccsize = chip->ecc.size;
++	int eccbytes = chip->ecc.bytes;
++	uint8_t *ecc_code = chip->buffers->ecccode;
++	uint8_t *ecc_calc = chip->buffers->ecccalc;
++	int i;
++
++	/* Column address wihin the page aligned to ECC size */
++	start_step = data_offs / chip->ecc.size;
++	end_step = (data_offs + readlen - 1) / chip->ecc.size;
++	num_steps = end_step - start_step + 1;
++
++	data_col_addr = start_step * chip->ecc.size;
++
++	/* Read the OOB area first */
++	if (mtd->writesize > 512) {
++		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
++		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
++	} else {
++		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
++	}
++
++	for (i = 0; i < chip->ecc.total; i++)
++		ecc_code[i] = chip->oob_poi[eccpos[i]];
++
++	p = bufpoi + data_col_addr;
++
++	for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
++		int stat;
++
++		chip->ecc.hwctl(mtd, NAND_ECC_READ);
++		chip->read_buf(mtd, p, eccsize);
++		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
++
++		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
++		if (stat < 0)
++			mtd->ecc_stats.failed++;
++		else
++			mtd->ecc_stats.corrected += stat;
++	}
++
++	return 0;
++}
++
++/**
+  * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+  * @mtd: mtd info structure
+  * @chip: nand chip info structure
+@@ -1482,7 +1551,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ 							      bufpoi, page);
+ 			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+ 				ret = chip->ecc.read_subpage(mtd, chip,
+-							col, bytes, bufpoi);
++							col, bytes, bufpoi, page);
+ 			else
+ 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ 							  page);
+@@ -3292,8 +3361,11 @@ int nand_scan_tail(struct mtd_info *mtd)
+ 				   "hardware ECC not possible\n");
+ 			BUG();
+ 		}
+-		if (!chip->ecc.read_page)
++		if (!chip->ecc.read_page) {
+ 			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
++			if (!chip->ecc.read_subpage)
++				chip->ecc.read_subpage = nand_read_subpage_hwecc_oob_first;
++		}
+ 
+ 	case NAND_ECC_HW:
+ 		/* Use standard hwecc read page function? */
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index 904131b..9034100 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -211,9 +211,9 @@ typedef enum {
+ #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
+ #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
+ #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+-/* Large page NAND with SOFT_ECC should support subpage reads */
+-#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+-					&& (chip->page_shift > 9))
++/* Large page NAND with read_subpage set should support subpage reads */
++#define NAND_SUBPAGE_READ(chip) (((chip)->ecc.read_subpage) \
++					&& ((chip)->page_shift > 9))
+ 
+ /* Mask to zero out the chip options, which come from the id table */
+ #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
+@@ -367,7 +367,7 @@ struct nand_ecc_ctrl {
+ 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ 			uint8_t *buf, int page);
+ 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+-			uint32_t offs, uint32_t len, uint8_t *buf);
++			uint32_t offs, uint32_t len, uint8_t *buf, int page);
+ 	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ 			const uint8_t *buf);
+ 	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch b/target/linux/xburst/patches-3.2/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch
new file mode 100644
index 0000000..89247ca
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch
@@ -0,0 +1,58 @@
+From 4f28237a750afd1112b6f1266d36f8b718efe89c Mon Sep 17 00:00:00 2001
+From: Xiangfu Liu <xiangfu@sharism.cc>
+Date: Tue, 6 Mar 2012 11:19:26 +0800
+Subject: [PATCH 05/21] NAND-Optimize-reading-the-eec-data-for-the-JZ4740
+
+---
+ drivers/mtd/nand/nand_base.c |   14 ++++----------
+ 1 files changed, 4 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 0131e84..74b8cce 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1295,8 +1295,8 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ 
+ 	/* Read the OOB area first */
+ 	if (mtd->writesize > 512) {
+-		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+-		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize + eccpos[0], page);
++		chip->read_buf(mtd, ecc_code, chip->ecc.total);
+ 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
+ 	} else {
+ 		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+@@ -1304,9 +1304,6 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ 		chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ 	}
+ 
+-	for (i = 0; i < chip->ecc.total; i++)
+-		ecc_code[i] = chip->oob_poi[eccpos[i]];
+-
+ 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ 		int stat;
+ 
+@@ -1361,8 +1358,8 @@ static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_c
+ 
+ 	/* Read the OOB area first */
+ 	if (mtd->writesize > 512) {
+-		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+-		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize + eccpos[0], page);
++		chip->read_buf(mtd, ecc_code, chip->ecc.total);
+ 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+ 	} else {
+ 		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+@@ -1370,9 +1367,6 @@ static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_c
+ 		chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
+ 	}
+ 
+-	for (i = 0; i < chip->ecc.total; i++)
+-		ecc_code[i] = chip->oob_poi[eccpos[i]];
+-
+ 	p = bufpoi + data_col_addr;
+ 
+ 	for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch b/target/linux/xburst/patches-3.2/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch
new file mode 100644
index 0000000..e5edbc0
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch
@@ -0,0 +1,426 @@
+From d5814bdb661d3dac61422f8f69e459be884c9a9d Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Tue, 2 Aug 2011 10:49:28 +0200
+Subject: [PATCH 06/21] MTD: NAND: JZ4740: Multi-bank support with
+ autodetection
+
+The platform data can now specify which external memory banks to probe
+for NAND chips, and in which order. Banks that contain a NAND are used
+and the other banks are freed.
+
+Squashed version of development done in jz-2.6.38 branch.
+Original patch by Lars-Peter Clausen with some bug fixes from me.
+Thanks to Paul Cercueil for the initial autodetection patch.
+---
+ arch/mips/include/asm/mach-jz4740/jz4740_nand.h |    4 +
+ arch/mips/jz4740/platform.c                     |   20 ++-
+ drivers/mtd/nand/jz4740_nand.c                  |  228 +++++++++++++++++++----
+ 3 files changed, 215 insertions(+), 37 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+index bb5b9a4..986982d 100644
+--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
++++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+@@ -19,6 +19,8 @@
+ #include <linux/mtd/nand.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define JZ_NAND_NUM_BANKS 4
++
+ struct jz_nand_platform_data {
+ 	int			num_partitions;
+ 	struct mtd_partition	*partitions;
+@@ -27,6 +29,8 @@ struct jz_nand_platform_data {
+ 
+ 	unsigned int busy_gpio;
+ 
++	unsigned char banks[JZ_NAND_NUM_BANKS];
++
+ 	void (*ident_callback)(struct platform_device *, struct nand_chip *,
+ 				struct mtd_partition **, int *num_partitions);
+ };
+diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
+index 10929e2..e342ed4 100644
+--- a/arch/mips/jz4740/platform.c
++++ b/arch/mips/jz4740/platform.c
+@@ -157,11 +157,29 @@ static struct resource jz4740_nand_resources[] = {
+ 		.flags	= IORESOURCE_MEM,
+ 	},
+ 	{
+-		.name	= "bank",
++		.name	= "bank1",
+ 		.start	= 0x18000000,
+ 		.end	= 0x180C0000 - 1,
+ 		.flags = IORESOURCE_MEM,
+ 	},
++	{
++		.name	= "bank2",
++		.start	= 0x14000000,
++		.end	= 0x140C0000 - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name	= "bank3",
++		.start	= 0x0C000000,
++		.end	= 0x0C0C0000 - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name	= "bank4",
++		.start	= 0x08000000,
++		.end	= 0x080C0000 - 1,
++		.flags = IORESOURCE_MEM,
++	},
+ };
+ 
+ struct platform_device jz4740_nand_device = {
+diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
+index e266407..b254b99 100644
+--- a/drivers/mtd/nand/jz4740_nand.c
++++ b/drivers/mtd/nand/jz4740_nand.c
+@@ -52,9 +52,10 @@
+ 
+ #define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
+ #define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
++#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
+ 
+-#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+ #define JZ_NAND_MEM_CMD_OFFSET 0x08000
++#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+ 
+ struct jz_nand {
+ 	struct mtd_info mtd;
+@@ -62,8 +63,11 @@ struct jz_nand {
+ 	void __iomem *base;
+ 	struct resource *mem;
+ 
+-	void __iomem *bank_base;
+-	struct resource *bank_mem;
++	unsigned char banks[JZ_NAND_NUM_BANKS];
++	void __iomem *bank_base[JZ_NAND_NUM_BANKS];
++	struct resource *bank_mem[JZ_NAND_NUM_BANKS];
++
++	int selected_bank;
+ 
+ 	struct jz_nand_platform_data *pdata;
+ 	bool is_reading;
+@@ -74,26 +78,50 @@ static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
+ 	return container_of(mtd, struct jz_nand, mtd);
+ }
+ 
++static void jz_nand_select_chip(struct mtd_info *mtd, int chipnr)
++{
++	struct jz_nand *nand = mtd_to_jz_nand(mtd);
++	struct nand_chip *chip = mtd->priv;
++	uint32_t ctrl;
++	int banknr;
++
++	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
++	ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
++
++	if (chipnr == -1) {
++		banknr = -1;
++	} else {
++		banknr = nand->banks[chipnr] - 1;
++		chip->IO_ADDR_R = nand->bank_base[banknr];
++		chip->IO_ADDR_W = nand->bank_base[banknr];
++	}
++	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
++
++	nand->selected_bank = banknr;
++}
++
+ static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+ {
+ 	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ 	struct nand_chip *chip = mtd->priv;
+ 	uint32_t reg;
++	void __iomem *bank_base = nand->bank_base[nand->selected_bank];
++
++	BUG_ON(nand->selected_bank < 0);
+ 
+ 	if (ctrl & NAND_CTRL_CHANGE) {
+ 		BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
+ 		if (ctrl & NAND_ALE)
+-			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
++			bank_base += JZ_NAND_MEM_ADDR_OFFSET;
+ 		else if (ctrl & NAND_CLE)
+-			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
+-		else
+-			chip->IO_ADDR_W = nand->bank_base;
++			bank_base += JZ_NAND_MEM_CMD_OFFSET;
++		chip->IO_ADDR_W = bank_base;
+ 
+ 		reg = readl(nand->base + JZ_REG_NAND_CTRL);
+ 		if (ctrl & NAND_NCE)
+-			reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
++			reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ 		else
+-			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
++			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ 		writel(reg, nand->base + JZ_REG_NAND_CTRL);
+ 	}
+ 	if (dat != NAND_CMD_NONE)
+@@ -252,7 +280,7 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
+ }
+ 
+ static int jz_nand_ioremap_resource(struct platform_device *pdev,
+-	const char *name, struct resource **res, void __iomem **base)
++	const char *name, struct resource **res, void *__iomem *base)
+ {
+ 	int ret;
+ 
+@@ -288,6 +316,90 @@ err:
+ 	return ret;
+ }
+ 
++static inline void jz_nand_iounmap_resource(struct resource *res, void __iomem *base)
++{
++	iounmap(base);
++	release_mem_region(res->start, resource_size(res));
++}
++
++static int __devinit jz_nand_detect_bank(struct platform_device *pdev, struct jz_nand *nand, unsigned char bank, size_t chipnr, uint8_t *nand_maf_id, uint8_t *nand_dev_id) {
++	int ret;
++	int gpio;
++	char gpio_name[9];
++	char res_name[6];
++	uint32_t ctrl;
++	struct mtd_info *mtd = &nand->mtd;
++	struct nand_chip *chip = &nand->chip;
++
++	/* Request GPIO port. */
++	gpio = JZ_GPIO_MEM_CS0 + bank - 1;
++	sprintf(gpio_name, "NAND CS%d", bank);
++	ret = gpio_request(gpio, gpio_name);
++	if (ret) {
++		dev_warn(&pdev->dev,
++			"Failed to request %s gpio %d: %d\n",
++			gpio_name, gpio, ret);
++		goto notfound_gpio;
++	}
++
++	/* Request I/O resource. */
++	sprintf(res_name, "bank%d", bank);
++	ret = jz_nand_ioremap_resource(pdev, res_name,
++					&nand->bank_mem[bank - 1],
++					&nand->bank_base[bank - 1]);
++	if (ret)
++		goto notfound_resource;
++
++	/* Enable chip in bank. */
++	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
++	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
++	ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
++	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
++
++	if (chipnr == 0) {
++		/* Detect first chip. */
++		ret = nand_scan_ident(mtd, 1, NULL);
++		if (ret)
++			goto notfound_id;
++
++		/* Retrieve the IDs from the first chip. */
++		chip->select_chip(mtd, 0);
++		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
++		*nand_maf_id = chip->read_byte(mtd);
++		*nand_dev_id = chip->read_byte(mtd);
++	} else {
++		/* Detect additional chip. */
++		chip->select_chip(mtd, chipnr);
++		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
++		if (*nand_maf_id != chip->read_byte(mtd)
++		 || *nand_dev_id != chip->read_byte(mtd)) {
++			ret = -ENODEV;
++			goto notfound_id;
++		}
++
++		/* Update size of the MTD. */
++		chip->numchips++;
++		mtd->size += chip->chipsize;
++	}
++
++	dev_info(&pdev->dev, "Found chip %i on bank %i\n", chipnr, bank);
++	return 0;
++
++notfound_id:
++	dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
++	ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
++	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
++	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
++	jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
++				 nand->bank_base[bank - 1]);
++notfound_resource:
++	gpio_free(gpio);
++notfound_gpio:
++	return ret;
++}
++
+ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ {
+ 	int ret;
+@@ -295,6 +407,8 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 	struct nand_chip *chip;
+ 	struct mtd_info *mtd;
+ 	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
++	size_t chipnr, bank_idx;
++	uint8_t nand_maf_id = 0, nand_dev_id = 0;
+ 
+ 	nand = kzalloc(sizeof(*nand), GFP_KERNEL);
+ 	if (!nand) {
+@@ -305,10 +419,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 	ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
+ 	if (ret)
+ 		goto err_free;
+-	ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
+-			&nand->bank_base);
+-	if (ret)
+-		goto err_iounmap_mmio;
+ 
+ 	if (pdata && gpio_is_valid(pdata->busy_gpio)) {
+ 		ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
+@@ -316,7 +426,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 			dev_err(&pdev->dev,
+ 				"Failed to request busy gpio %d: %d\n",
+ 				pdata->busy_gpio, ret);
+-			goto err_iounmap_mem;
++			goto err_iounmap_mmio;
+ 		}
+ 	}
+ 
+@@ -338,22 +448,51 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 
+ 	chip->chip_delay = 50;
+ 	chip->cmd_ctrl = jz_nand_cmd_ctrl;
++	chip->select_chip = jz_nand_select_chip;
+ 
+ 	if (pdata && gpio_is_valid(pdata->busy_gpio))
+ 		chip->dev_ready = jz_nand_dev_ready;
+ 
+-	chip->IO_ADDR_R = nand->bank_base;
+-	chip->IO_ADDR_W = nand->bank_base;
+-
+ 	nand->pdata = pdata;
+ 	platform_set_drvdata(pdev, nand);
+ 
+-	writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
+-
+-	ret = nand_scan_ident(mtd, 1, NULL);
+-	if (ret) {
+-		dev_err(&pdev->dev,  "Failed to scan nand\n");
+-		goto err_gpio_free;
++	/* We are going to autodetect NAND chips in the banks specified in the
++	 * platform data. Although nand_scan_ident() can detect multiple chips,
++	 * it requires those chips to be numbered consecuitively, which is not
++	 * always the case for external memory banks. And a fixed chip-to-bank
++	 * mapping is not practical either, since for example Dingoo units
++	 * produced at different times have NAND chips in different banks.
++	 */
++	chipnr = 0;
++	for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
++		unsigned char bank;
++
++		/* If there is no platform data, look for NAND in bank 1,
++		 * which is the most likely bank since it is the only one
++		 * that can be booted from.
++		 */
++		bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
++		if (bank == 0)
++			break;
++		if (bank > JZ_NAND_NUM_BANKS) {
++			dev_warn(&pdev->dev,
++				"Skipping non-existing bank: %d\n", bank);
++			continue;
++		}
++		/* The detection routine will directly or indirectly call
++		 * jz_nand_select_chip(), so nand->banks has to contain the
++		 * bank we're checking.
++		 */
++		nand->banks[chipnr] = bank;
++		if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
++					&nand_maf_id, &nand_dev_id) == 0)
++			chipnr++;
++		else
++			nand->banks[chipnr] = 0;
++	}
++	if (chipnr == 0) {
++		dev_err(&pdev->dev, "No NAND chips found\n");
++		goto err_gpio_busy;
+ 	}
+ 
+ 	if (pdata && pdata->ident_callback) {
+@@ -363,8 +502,8 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 
+ 	ret = nand_scan_tail(mtd);
+ 	if (ret) {
+-		dev_err(&pdev->dev,  "Failed to scan nand\n");
+-		goto err_gpio_free;
++		dev_err(&pdev->dev,  "Failed to scan NAND\n");
++		goto err_unclaim_banks;
+ 	}
+ 
+ 	ret = mtd_device_parse_register(mtd, NULL, 0,
+@@ -381,14 +520,21 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
+ 	return 0;
+ 
+ err_nand_release:
+-	nand_release(&nand->mtd);
+-err_gpio_free:
++	nand_release(mtd);
++err_unclaim_banks:
++	while (chipnr--) {
++		unsigned char bank = nand->banks[chipnr];
++		gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
++		jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
++					 nand->bank_base[bank - 1]);
++	}
++	writel(0, nand->base + JZ_REG_NAND_CTRL);
++err_gpio_busy:
++	if (pdata && gpio_is_valid(pdata->busy_gpio))
++		gpio_free(pdata->busy_gpio);
+ 	platform_set_drvdata(pdev, NULL);
+-	gpio_free(pdata->busy_gpio);
+-err_iounmap_mem:
+-	iounmap(nand->bank_base);
+ err_iounmap_mmio:
+-	iounmap(nand->base);
++	jz_nand_iounmap_resource(nand->mem, nand->base);
+ err_free:
+ 	kfree(nand);
+ 	return ret;
+@@ -397,16 +543,26 @@ err_free:
+ static int __devexit jz_nand_remove(struct platform_device *pdev)
+ {
+ 	struct jz_nand *nand = platform_get_drvdata(pdev);
++	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
++	size_t i;
+ 
+ 	nand_release(&nand->mtd);
+ 
+ 	/* Deassert and disable all chips */
+ 	writel(0, nand->base + JZ_REG_NAND_CTRL);
+ 
+-	iounmap(nand->bank_base);
+-	release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
+-	iounmap(nand->base);
+-	release_mem_region(nand->mem->start, resource_size(nand->mem));
++	for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
++		unsigned char bank = nand->banks[i];
++		if (bank != 0) {
++			jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
++						 nand->bank_base[bank - 1]);
++			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
++		}
++	}
++	if (pdata && gpio_is_valid(pdata->busy_gpio))
++		gpio_free(pdata->busy_gpio);
++
++	jz_nand_iounmap_resource(nand->mem, nand->base);
+ 
+ 	platform_set_drvdata(pdev, NULL);
+ 	kfree(nand);
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0007-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.2/0007-Add-ili8960-lcd-driver.patch
new file mode 100644
index 0000000..d31f517
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0007-Add-ili8960-lcd-driver.patch
@@ -0,0 +1,314 @@
+From 2248fb9c47fe7e72c735d6c16aba27bf92e1673a Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sun, 1 Aug 2010 21:19:40 +0200
+Subject: [PATCH 07/21] Add ili8960 lcd driver
+
+---
+ drivers/video/backlight/Kconfig   |    7 +
+ drivers/video/backlight/Makefile  |    1 +
+ drivers/video/backlight/ili8960.c |  263 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 271 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/backlight/ili8960.c
+
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 278aeaa..f617883 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -59,6 +59,13 @@ config LCD_LTV350QV
+ 
+ 	  The LTV350QV panel is present on all ATSTK1000 boards.
+ 
++config LCD_ILI8960
++	tristate "Ilitek ili8960 LCD driver"
++	depends on LCD_CLASS_DEVICE && SPI
++	default n
++	help
++	  Driver for the Ilitek ili8960 LCD controller chip.
++
+ config LCD_ILI9320
+ 	tristate
+ 	help
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index fdd1fc4..01ec378 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -6,6 +6,7 @@ obj-$(CONFIG_LCD_HP700)		   += jornada720_lcd.o
+ obj-$(CONFIG_LCD_L4F00242T03)	   += l4f00242t03.o
+ obj-$(CONFIG_LCD_LMS283GF05)	   += lms283gf05.o
+ obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
++obj-$(CONFIG_LCD_ILI8960)	   += ili8960.o
+ obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
+ obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
+ obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
+diff --git a/drivers/video/backlight/ili8960.c b/drivers/video/backlight/ili8960.c
+new file mode 100644
+index 0000000..1438e92
+--- /dev/null
++++ b/drivers/video/backlight/ili8960.c
+@@ -0,0 +1,263 @@
++/*
++ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
++ *  Driver for Ilitek ili8960 LCD
++ *
++ *  This program is free software; you can redistribute	 it and/or modify it
++ *  under  the terms of	 the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the	License, or (at your
++ *  option) any later version.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++#include <linux/lcd.h>
++#include <linux/backlight.h>
++#include <linux/delay.h>
++
++struct ili8960 {
++	struct spi_device *spi;
++	struct lcd_device *lcd;
++	struct backlight_device *bl;
++	bool enabled;
++	unsigned int brightness;
++};
++
++#define ILI8960_REG_BRIGHTNESS	0x03
++#define ILI8960_REG_POWER	0x05
++#define ILI8960_REG_CONTRAST	0x0d
++
++static int ili8960_write_reg(struct spi_device *spi, uint8_t reg,
++				uint8_t data)
++{
++	uint8_t buf[2];
++	buf[0] = ((reg & 0x40) << 1) | (reg & 0x3f);
++	buf[1] = data;
++
++	return spi_write(spi, buf, sizeof(buf));
++}
++
++static int ili8960_programm_power(struct spi_device *spi, bool enabled)
++{
++	int ret;
++
++	if (enabled)
++		mdelay(20);
++
++	ret = ili8960_write_reg(spi, ILI8960_REG_POWER, enabled ? 0xc7 : 0xc6);
++
++	if (!enabled)
++		mdelay(20);
++
++	return ret;
++}
++
++static int ili8960_set_power(struct lcd_device *lcd, int power)
++{
++	struct ili8960 *ili8960 = lcd_get_data(lcd);
++
++	switch (power) {
++	case FB_BLANK_UNBLANK:
++		ili8960->enabled = true;
++		break;
++	default:
++		ili8960->enabled = false;
++		break;
++	}
++
++	return ili8960_programm_power(ili8960->spi, ili8960->enabled);
++}
++
++static int ili8960_get_power(struct lcd_device *lcd)
++{
++	struct ili8960 *ili8960 = lcd_get_data(lcd);
++	return ili8960->enabled ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
++}
++
++static int ili8960_set_contrast(struct lcd_device *lcd, int contrast)
++{
++	struct ili8960 *ili8960 = lcd_get_data(lcd);
++
++	return ili8960_write_reg(ili8960->spi, ILI8960_REG_CONTRAST, contrast);
++}
++
++static int ili8960_set_mode(struct lcd_device *lcd, struct fb_videomode *mode)
++{
++	if (mode->xres != 320 && mode->yres != 240)
++		return -EINVAL;
++
++	return 0;
++}
++
++static int ili8960_set_brightness(struct ili8960 *ili8960, int brightness)
++{
++	int ret;
++
++	ret = ili8960_write_reg(ili8960->spi, ILI8960_REG_BRIGHTNESS, brightness);
++
++	if (ret == 0)
++		ili8960->brightness = brightness;
++
++	return ret;
++}
++
++static ssize_t ili8960_show_brightness(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct lcd_device *ld = to_lcd_device(dev);
++	struct ili8960 *ili8960 = lcd_get_data(ld);
++
++	return sprintf(buf, "%u\n", ili8960->brightness);
++}
++
++static ssize_t ili8960_store_brightness(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct lcd_device *ld = to_lcd_device(dev);
++	struct ili8960 *ili8960 = lcd_get_data(ld);
++	unsigned long brightness;
++	int ret;
++
++	ret = strict_strtoul(buf, 0, &brightness);
++	if (ret)
++		return ret;
++
++	if (brightness > 255)
++		return -EINVAL;
++
++	ili8960_set_brightness(ili8960, brightness);
++
++	return count;
++}
++
++
++static DEVICE_ATTR(brightness, 0644, ili8960_show_brightness,
++	ili8960_store_brightness);
++
++static struct lcd_ops ili8960_lcd_ops = {
++	.set_power = ili8960_set_power,
++	.get_power = ili8960_get_power,
++	.set_contrast = ili8960_set_contrast,
++	.set_mode = ili8960_set_mode,
++};
++
++static int __devinit ili8960_probe(struct spi_device *spi)
++{
++	int ret;
++	struct ili8960 *ili8960;
++
++	ili8960 = kmalloc(sizeof(*ili8960), GFP_KERNEL);
++	if (!ili8960)
++		return -ENOMEM;
++
++	spi->bits_per_word = 8;
++	spi->mode = SPI_MODE_3;
++
++	ret = spi_setup(spi);
++	if (ret) {
++		dev_err(&spi->dev, "Failed to setup spi\n");
++		goto err_free_ili8960;
++	}
++
++	ili8960->spi = spi;
++
++	ili8960->lcd = lcd_device_register("ili8960-lcd", &spi->dev, ili8960,
++						&ili8960_lcd_ops);
++
++	if (IS_ERR(ili8960->lcd)) {
++		ret = PTR_ERR(ili8960->lcd);
++		dev_err(&spi->dev, "Failed to register lcd device: %d\n", ret);
++		goto err_free_ili8960;
++	}
++
++	ili8960->lcd->props.max_contrast = 255;
++
++	ret = device_create_file(&ili8960->lcd->dev, &dev_attr_brightness);
++	if (ret)
++		goto err_unregister_lcd;
++
++	ili8960_programm_power(ili8960->spi, true);
++	ili8960->enabled = true;
++
++	spi_set_drvdata(spi, ili8960);
++
++	ili8960_write_reg(spi, 0x13, 0x01);
++
++	return 0;
++err_unregister_lcd:
++	lcd_device_unregister(ili8960->lcd);
++err_free_ili8960:
++	kfree(ili8960);
++	return ret;
++}
++
++static int __devexit ili8960_remove(struct spi_device *spi)
++{
++	struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++	device_remove_file(&ili8960->lcd->dev, &dev_attr_brightness);
++	lcd_device_unregister(ili8960->lcd);
++
++	spi_set_drvdata(spi, NULL);
++	kfree(ili8960);
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int ili8960_suspend(struct spi_device *spi, pm_message_t state)
++{
++	struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++	if (ili8960->enabled)
++		ili8960_programm_power(ili8960->spi, false);
++
++	return 0;
++}
++
++static int ili8960_resume(struct spi_device *spi)
++{
++	struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++	if (ili8960->enabled)
++		ili8960_programm_power(ili8960->spi, true);
++
++	return 0;
++}
++
++#else
++#define ili8960_suspend NULL
++#define ili8960_resume NULL
++#endif
++
++static struct spi_driver ili8960_driver = {
++	.driver = {
++		.name = "ili8960",
++		.owner = THIS_MODULE,
++	},
++	.probe = ili8960_probe,
++	.remove = __devexit_p(ili8960_remove),
++	.suspend = ili8960_suspend,
++	.resume = ili8960_resume,
++};
++
++static int __init ili8960_init(void)
++{
++	return spi_register_driver(&ili8960_driver);
++}
++module_init(ili8960_init);
++
++static void __exit ili8960_exit(void)
++{
++	spi_unregister_driver(&ili8960_driver);
++}
++module_exit(ili8960_exit)
++
++MODULE_AUTHOR("Lars-Peter Clausen");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("LCD driver for Ilitek ili8960");
++MODULE_ALIAS("spi:ili8960");
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.2/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
new file mode 100644
index 0000000..f6a26fd
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
@@ -0,0 +1,26 @@
+From e5f25e25ed6c0478cbba7a32891b911e3183dad4 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Wed, 13 Oct 2010 01:17:24 +0200
+Subject: [PATCH 08/21] qi_lb60: Don't use 3-wire spi mode for the display for
+ now
+
+The spi_gpio driver does not support 3-wire mode.
+---
+ arch/mips/jz4740/board-qi_lb60.c |    1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index c3b04be..b622941 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -310,7 +310,6 @@ static struct spi_board_info qi_lb60_spi_board_info[] = {
+ 		.chip_select = 0,
+ 		.bus_num = 1,
+ 		.max_speed_hz = 30 * 1000,
+-		.mode = SPI_3WIRE,
+ 	},
+ };
+ 
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch b/target/linux/xburst/patches-3.2/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch
new file mode 100644
index 0000000..99251ad
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch
@@ -0,0 +1,133 @@
+From 4003b9a2c05f4d0d37535c3dffbf4a7b47d5c36c Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Wed, 8 Sep 2010 02:31:19 +0200
+Subject: [PATCH 09/21] /dev/mem: Add kernel config option to omit this
+ device.
+
+Omitting this device prevents software from accessing the hardware directly, which can cause trouble if the kernel accesses the same hardware.
+It also saves some space on embedded systems.
+---
+ arch/x86/Kconfig.debug |    1 +
+ drivers/char/Kconfig   |   10 ++++++++++
+ drivers/char/mem.c     |   17 +++++++++++++++++
+ 3 files changed, 28 insertions(+), 0 deletions(-)
+
+diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
+index bf56e17..0c97d51 100644
+--- a/arch/x86/Kconfig.debug
++++ b/arch/x86/Kconfig.debug
+@@ -7,6 +7,7 @@ source "lib/Kconfig.debug"
+ 
+ config STRICT_DEVMEM
+ 	bool "Filter access to /dev/mem"
++	depends on DEVMEM
+ 	---help---
+ 	  If this option is disabled, you allow userspace (root) access to all
+ 	  of memory, including kernel and userspace memory. Accidental
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index 4364303..a2e462e 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -6,6 +6,16 @@ menu "Character devices"
+ 
+ source "drivers/tty/Kconfig"
+ 
++config DEVMEM
++	bool "/dev/mem virtual device support"
++	default y
++	help
++	  Say Y here if you want to support the /dev/mem device.
++	  Some X server drivers access the video hardware using this device.
++	  Accessing hardware directly from user space can be useful in some
++	  cases, but it is not without risks.
++	  When in doubt, say "N".
++
+ config DEVKMEM
+ 	bool "/dev/kmem virtual device support"
+ 	default y
+diff --git a/drivers/char/mem.c b/drivers/char/mem.c
+index 1451790..a6020ca 100644
+--- a/drivers/char/mem.c
++++ b/drivers/char/mem.c
+@@ -87,6 +87,8 @@ void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+ {
+ }
+ 
++#ifdef CONFIG_DEVMEM
++
+ /*
+  * This funcion reads the *physical* memory. The f_pos points directly to the
+  * memory location.
+@@ -210,6 +212,10 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
+ 	return written;
+ }
+ 
++#endif
++
++#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM)
++
+ int __weak phys_mem_access_prot_allowed(struct file *file,
+ 	unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
+ {
+@@ -331,6 +337,8 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma)
+ 	return 0;
+ }
+ 
++#endif
++
+ #ifdef CONFIG_DEVKMEM
+ static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
+ {
+@@ -694,6 +702,7 @@ static loff_t null_lseek(struct file *file, loff_t offset, int orig)
+ 	return file->f_pos = 0;
+ }
+ 
++#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM) || defined(CONFIG_DEVPORT)
+ /*
+  * The memory devices use the full 32/64 bits of the offset, and so we cannot
+  * check against negative addresses: they are ok. The return value is weird,
+@@ -726,11 +735,15 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
+ 	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
+ 	return ret;
+ }
++#endif
+ 
++#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM) || \
++		defined(CONFIG_DEVPORT) || defined(CONFIG_CRASH_DUMP)
+ static int open_port(struct inode * inode, struct file * filp)
+ {
+ 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+ }
++#endif
+ 
+ #define zero_lseek	null_lseek
+ #define full_lseek      null_lseek
+@@ -740,6 +753,7 @@ static int open_port(struct inode * inode, struct file * filp)
+ #define open_kmem	open_mem
+ #define open_oldmem	open_mem
+ 
++#ifdef CONFIG_DEVMEM
+ static const struct file_operations mem_fops = {
+ 	.llseek		= memory_lseek,
+ 	.read		= read_mem,
+@@ -748,6 +762,7 @@ static const struct file_operations mem_fops = {
+ 	.open		= open_mem,
+ 	.get_unmapped_area = get_unmapped_area_mem,
+ };
++#endif
+ 
+ #ifdef CONFIG_DEVKMEM
+ static const struct file_operations kmem_fops = {
+@@ -851,7 +866,9 @@ static const struct memdev {
+ 	const struct file_operations *fops;
+ 	struct backing_dev_info *dev_info;
+ } devlist[] = {
++#ifdef CONFIG_DEVMEM
+ 	 [1] = { "mem", 0, &mem_fops, &directly_mappable_cdev_bdi },
++#endif
+ #ifdef CONFIG_DEVKMEM
+ 	 [2] = { "kmem", 0, &kmem_fops, &directly_mappable_cdev_bdi },
+ #endif
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch b/target/linux/xburst/patches-3.2/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch
new file mode 100644
index 0000000..d65a362
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch
@@ -0,0 +1,306 @@
+From ca40c7542f0cd0e0dfa074bd4ccefc04b8561427 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Tue, 2 Aug 2011 10:26:09 +0200
+Subject: [PATCH 10/21] cpufreq_stats: Support runtime changes to frequency
+ table.
+
+---
+ drivers/cpufreq/cpufreq_stats.c |  161 ++++++++++++++++++++-------------------
+ 1 files changed, 83 insertions(+), 78 deletions(-)
+
+diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
+index c5072a9..95f6eb9 100644
+--- a/drivers/cpufreq/cpufreq_stats.c
++++ b/drivers/cpufreq/cpufreq_stats.c
+@@ -21,6 +21,7 @@
+ #include <linux/kobject.h>
+ #include <linux/spinlock.h>
+ #include <linux/notifier.h>
++#include <linux/string.h>
+ #include <asm/cputime.h>
+ 
+ static spinlock_t cpufreq_stats_lock;
+@@ -37,7 +38,7 @@ struct cpufreq_stats {
+ 	unsigned long long  last_time;
+ 	unsigned int max_state;
+ 	unsigned int state_num;
+-	unsigned int last_index;
++	int last_index;
+ 	cputime64_t *time_in_state;
+ 	unsigned int *freq_table;
+ #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+@@ -60,7 +61,7 @@ static int cpufreq_stats_update(unsigned int cpu)
+ 	cur_time = get_jiffies_64();
+ 	spin_lock(&cpufreq_stats_lock);
+ 	stat = per_cpu(cpufreq_stats_table, cpu);
+-	if (stat->time_in_state)
++	if (stat->time_in_state && stat->last_index != -1)
+ 		stat->time_in_state[stat->last_index] =
+ 			cputime64_add(stat->time_in_state[stat->last_index],
+ 				      cputime_sub(cur_time, stat->last_time));
+@@ -83,7 +84,7 @@ static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf)
+ 	ssize_t len = 0;
+ 	int i;
+ 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, policy->cpu);
+-	if (!stat)
++	if (!stat || !stat->time_in_state)
+ 		return 0;
+ 	cpufreq_stats_update(stat->cpu);
+ 	for (i = 0; i < stat->state_num; i++) {
+@@ -101,7 +102,7 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
+ 	int i, j;
+ 
+ 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, policy->cpu);
+-	if (!stat)
++	if (!stat || !stat->trans_table)
+ 		return 0;
+ 	cpufreq_stats_update(stat->cpu);
+ 	len += snprintf(buf + len, PAGE_SIZE - len, "   From  :    To\n");
+@@ -160,63 +161,35 @@ static struct attribute_group stats_attr_group = {
+ static int freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq)
+ {
+ 	int index;
+-	for (index = 0; index < stat->max_state; index++)
+-		if (stat->freq_table[index] == freq)
+-			return index;
++	if (stat->freq_table)
++		for (index = 0; index < stat->max_state; index++)
++			if (stat->freq_table[index] == freq)
++				return index;
+ 	return -1;
+ }
+ 
+-/* should be called late in the CPU removal sequence so that the stats
+- * memory is still available in case someone tries to use it.
+- */
+ static void cpufreq_stats_free_table(unsigned int cpu)
+ {
+ 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
++	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
++	if (policy && policy->cpu == cpu)
++		sysfs_remove_group(&policy->kobj, &stats_attr_group);
+ 	if (stat) {
+ 		kfree(stat->time_in_state);
+ 		kfree(stat);
+ 	}
+ 	per_cpu(cpufreq_stats_table, cpu) = NULL;
+-}
+-
+-/* must be called early in the CPU removal sequence (before
+- * cpufreq_remove_dev) so that policy is still valid.
+- */
+-static void cpufreq_stats_free_sysfs(unsigned int cpu)
+-{
+-	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+-	if (policy && policy->cpu == cpu)
+-		sysfs_remove_group(&policy->kobj, &stats_attr_group);
+ 	if (policy)
+ 		cpufreq_cpu_put(policy);
+ }
+ 
+-static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
++static int cpufreq_stats_update_table(struct cpufreq_policy *policy,
+ 		struct cpufreq_frequency_table *table)
+ {
+-	unsigned int i, j, count = 0, ret = 0;
+-	struct cpufreq_stats *stat;
+-	struct cpufreq_policy *data;
++	unsigned int i, j, count = 0;
+ 	unsigned int alloc_size;
+ 	unsigned int cpu = policy->cpu;
+-	if (per_cpu(cpufreq_stats_table, cpu))
+-		return -EBUSY;
+-	stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL);
+-	if ((stat) == NULL)
+-		return -ENOMEM;
+-
+-	data = cpufreq_cpu_get(cpu);
+-	if (data == NULL) {
+-		ret = -EINVAL;
+-		goto error_get_fail;
+-	}
+-
+-	ret = sysfs_create_group(&data->kobj, &stats_attr_group);
+-	if (ret)
+-		goto error_out;
+-
+-	stat->cpu = cpu;
+-	per_cpu(cpufreq_stats_table, cpu) = stat;
++	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
+ 
+ 	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ 		unsigned int freq = table[i].frequency;
+@@ -225,40 +198,73 @@ static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
+ 		count++;
+ 	}
+ 
++	if (stat->max_state != count) {
++		stat->max_state = count;
++		kfree(stat->time_in_state);
++		stat->time_in_state = NULL;
++	}
+ 	alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
+-
+ #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+ 	alloc_size += count * count * sizeof(int);
+ #endif
+-	stat->max_state = count;
+-	stat->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
+-	if (!stat->time_in_state) {
+-		ret = -ENOMEM;
+-		goto error_out;
+-	}
+-	stat->freq_table = (unsigned int *)(stat->time_in_state + count);
+-
++	if (stat->time_in_state) {
++		memset(stat->time_in_state, 0, alloc_size);
++	} else {
++		stat->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
++		if (!stat->time_in_state)
++			return -ENOMEM;
++		stat->freq_table = (unsigned int *)(
++				stat->time_in_state + count);
+ #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+-	stat->trans_table = stat->freq_table + count;
++		stat->trans_table = stat->freq_table + count;
+ #endif
++	}
++
+ 	j = 0;
+-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+-		unsigned int freq = table[i].frequency;
+-		if (freq == CPUFREQ_ENTRY_INVALID)
+-			continue;
+-		if (freq_table_get_index(stat, freq) == -1)
+-			stat->freq_table[j++] = freq;
++	if (stat->freq_table) {
++		for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
++			unsigned int freq = table[i].frequency;
++			if (freq == CPUFREQ_ENTRY_INVALID)
++				continue;
++			if (freq_table_get_index(stat, freq) == -1)
++				stat->freq_table[j++] = freq;
++		}
+ 	}
+ 	stat->state_num = j;
+ 	spin_lock(&cpufreq_stats_lock);
+ 	stat->last_time = get_jiffies_64();
+ 	stat->last_index = freq_table_get_index(stat, policy->cur);
+ 	spin_unlock(&cpufreq_stats_lock);
++	return 0;
++}
++
++static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
++		struct cpufreq_frequency_table *table)
++{
++	unsigned int ret = 0;
++	struct cpufreq_stats *stat;
++	struct cpufreq_policy *data;
++	unsigned int cpu = policy->cpu;
++
++	stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL);
++	if ((stat) == NULL)
++		return -ENOMEM;
++
++	data = cpufreq_cpu_get(cpu);
++	if (data == NULL) {
++		ret = -EINVAL;
++		goto error_out;
++	}
++	ret = sysfs_create_group(&data->kobj, &stats_attr_group);
+ 	cpufreq_cpu_put(data);
++	if (ret)
++		goto error_out;
++
++	stat->cpu = cpu;
++	per_cpu(cpufreq_stats_table, cpu) = stat;
++
+ 	return 0;
+ error_out:
+-	cpufreq_cpu_put(data);
+-error_get_fail:
+ 	kfree(stat);
+ 	per_cpu(cpufreq_stats_table, cpu) = NULL;
+ 	return ret;
+@@ -276,10 +282,12 @@ static int cpufreq_stat_notifier_policy(struct notifier_block *nb,
+ 	table = cpufreq_frequency_get_table(cpu);
+ 	if (!table)
+ 		return 0;
+-	ret = cpufreq_stats_create_table(policy, table);
+-	if (ret)
+-		return ret;
+-	return 0;
++	if (!per_cpu(cpufreq_stats_table, cpu)) {
++		ret = cpufreq_stats_create_table(policy, table);
++		if (ret)
++			return ret;
++	}
++	return cpufreq_stats_update_table(policy, table);
+ }
+ 
+ static int cpufreq_stat_notifier_trans(struct notifier_block *nb,
+@@ -299,21 +307,23 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb,
+ 	old_index = stat->last_index;
+ 	new_index = freq_table_get_index(stat, freq->new);
+ 
+-	/* We can't do stat->time_in_state[-1]= .. */
+-	if (old_index == -1 || new_index == -1)
+-		return 0;
+-
+ 	cpufreq_stats_update(freq->cpu);
+-
+ 	if (old_index == new_index)
+ 		return 0;
+ 
++	if (new_index == -1)
++		return 0;
++
+ 	spin_lock(&cpufreq_stats_lock);
+ 	stat->last_index = new_index;
++	if (old_index != -1) {
+ #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+-	stat->trans_table[old_index * stat->max_state + new_index]++;
++		if (stat->trans_table)
++			stat->trans_table[old_index * stat->max_state +
++					  new_index]++;
+ #endif
+-	stat->total_trans++;
++		stat->total_trans++;
++	}
+ 	spin_unlock(&cpufreq_stats_lock);
+ 	return 0;
+ }
+@@ -329,9 +339,6 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
+ 	case CPU_ONLINE_FROZEN:
+ 		cpufreq_update_policy(cpu);
+ 		break;
+-	case CPU_DOWN_PREPARE:
+-		cpufreq_stats_free_sysfs(cpu);
+-		break;
+ 	case CPU_DEAD:
+ 	case CPU_DEAD_FROZEN:
+ 		cpufreq_stats_free_table(cpu);
+@@ -340,10 +347,9 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
+ 	return NOTIFY_OK;
+ }
+ 
+-/* priority=1 so this will get called before cpufreq_remove_dev */
+-static struct notifier_block cpufreq_stat_cpu_notifier __refdata = {
++static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
++{
+ 	.notifier_call = cpufreq_stat_cpu_callback,
+-	.priority = 1,
+ };
+ 
+ static struct notifier_block notifier_policy_block = {
+@@ -390,7 +396,6 @@ static void __exit cpufreq_stats_exit(void)
+ 	unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
+ 	for_each_online_cpu(cpu) {
+ 		cpufreq_stats_free_table(cpu);
+-		cpufreq_stats_free_sysfs(cpu);
+ 	}
+ }
+ 
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch b/target/linux/xburst/patches-3.2/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch
new file mode 100644
index 0000000..b667ebb
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch
@@ -0,0 +1,358 @@
+From 27ff621cd9a5347efda4be502abbef13a99146ce Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Sun, 29 Aug 2010 08:11:00 +0200
+Subject: [PATCH 11/21] MIPS: JZ4740: Added setting of PLL rate and main
+ dividers.
+
+This functionality makes a cpufreq driver possible.
+Squashed version of the development done in the jz-2.6.39 branch.
+---
+ arch/mips/jz4740/clock.c |  230 ++++++++++++++++++++++++++++++++++++++++++++--
+ arch/mips/jz4740/clock.h |    4 +
+ 2 files changed, 224 insertions(+), 10 deletions(-)
+
+diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
+index 118a8a5..da423d1 100644
+--- a/arch/mips/jz4740/clock.c
++++ b/arch/mips/jz4740/clock.c
+@@ -1,5 +1,8 @@
+ /*
++ *  Copyright (c) 2006-2007, Ingenic Semiconductor Inc.
+  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
++ *  Copyright (c) 2010, Ulrich Hecht <ulrich.hecht@gmail.com>
++ *  Copyright (c) 2010, Maarten ter Huurne <maarten@treewalker.org>
+  *  JZ4740 SoC clock support
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+@@ -41,16 +44,20 @@
+ #define JZ_CLOCK_CTRL_I2S_SRC_PLL	BIT(31)
+ #define JZ_CLOCK_CTRL_KO_ENABLE		BIT(30)
+ #define JZ_CLOCK_CTRL_UDC_SRC_PLL	BIT(29)
+-#define JZ_CLOCK_CTRL_UDIV_MASK		0x1f800000
+ #define JZ_CLOCK_CTRL_CHANGE_ENABLE	BIT(22)
+ #define JZ_CLOCK_CTRL_PLL_HALF		BIT(21)
+-#define JZ_CLOCK_CTRL_LDIV_MASK		0x001f0000
+ #define JZ_CLOCK_CTRL_UDIV_OFFSET	23
+ #define JZ_CLOCK_CTRL_LDIV_OFFSET	16
+ #define JZ_CLOCK_CTRL_MDIV_OFFSET	12
+ #define JZ_CLOCK_CTRL_PDIV_OFFSET	 8
+ #define JZ_CLOCK_CTRL_HDIV_OFFSET	 4
+ #define JZ_CLOCK_CTRL_CDIV_OFFSET	 0
++#define JZ_CLOCK_CTRL_UDIV_MASK		(0x3f << JZ_CLOCK_CTRL_UDIV_OFFSET)
++#define JZ_CLOCK_CTRL_LDIV_MASK		(0x1f << JZ_CLOCK_CTRL_LDIV_OFFSET)
++#define JZ_CLOCK_CTRL_MDIV_MASK		(0x0f << JZ_CLOCK_CTRL_MDIV_OFFSET)
++#define JZ_CLOCK_CTRL_PDIV_MASK		(0x0f << JZ_CLOCK_CTRL_PDIV_OFFSET)
++#define JZ_CLOCK_CTRL_HDIV_MASK		(0x0f << JZ_CLOCK_CTRL_HDIV_OFFSET)
++#define JZ_CLOCK_CTRL_CDIV_MASK		(0x0f << JZ_CLOCK_CTRL_CDIV_OFFSET)
+ 
+ #define JZ_CLOCK_GATE_UART0	BIT(0)
+ #define JZ_CLOCK_GATE_TCU	BIT(1)
+@@ -90,6 +97,7 @@
+ #define JZ_CLOCK_PLL_M_OFFSET		23
+ #define JZ_CLOCK_PLL_N_OFFSET		18
+ #define JZ_CLOCK_PLL_OD_OFFSET		16
++#define JZ_CLOCK_PLL_STABILIZE_OFFSET	0
+ 
+ #define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
+ #define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
+@@ -97,10 +105,15 @@
+ #define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
+ #define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
+ 
++#define JZ_REG_EMC_RTCNT	0x88
++#define JZ_REG_EMC_RTCOR	0x8C
++
+ static void __iomem *jz_clock_base;
+ static spinlock_t jz_clock_lock;
+ static LIST_HEAD(jz_clocks);
+ 
++static void __iomem *jz_emc_base;
++
+ struct main_clk {
+ 	struct clk clk;
+ 	uint32_t div_offset;
+@@ -204,25 +217,88 @@ static int jz_clk_ko_is_enabled(struct clk *clk)
+ 	return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
+ }
+ 
++static struct static_clk jz_clk_ext;
++
++static unsigned long jz_clk_pll_calc_rate(
++	unsigned int in_div, unsigned int feedback, unsigned int out_div)
++{
++	return ((jz_clk_ext.rate / in_div) * feedback) / out_div;
++}
++
++static void jz_clk_pll_calc_dividers(unsigned long rate,
++	unsigned int *in_div, unsigned int *feedback, unsigned int *out_div)
++{
++	unsigned int target;
++
++	/* The frequency after the input divider must be between 1 and 15 MHz.
++	   The highest divider yields the best resolution. */
++	*in_div = jz_clk_ext.rate / 1000000;
++	if (*in_div >= 34)
++		*in_div = 33;
++
++	/* The frequency before the output divider must be between 100 and
++	   500 MHz. The lowest target rate is more energy efficient. */
++	if (rate < 25000000) {
++		*out_div = 4;
++		target = 25000000 * 4;
++	} else if (rate <= 50000000) {
++		*out_div = 4;
++		target = rate * 4;
++	} else if (rate <= 100000000) {
++		*out_div = 2;
++		target = rate * 2;
++	} else if (rate <= 500000000) {
++		*out_div = 1;
++		target = rate;
++	} else {
++		*out_div = 1;
++		target = 500000000;
++	}
++
++	/* Compute the feedback divider.
++	   Since the divided input is at least 1 MHz and the target frequency
++	   at most 500 MHz, the feedback will be at most 500 and will therefore
++	   always fit in the 9-bit register.
++	   Similarly, the divided input is at most 15 MHz and the target
++	   frequency at least 100 MHz, so the feedback will be at least 6
++	   where the minimum supported value is 2. */
++	*feedback = ((target / 1000) * *in_div) / (jz_clk_ext.rate / 1000);
++}
++
++static unsigned long jz_clk_pll_round_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned int in_div, feedback, out_div;
++	/* The PLL frequency must be a multiple of 24 MHz, since the LCD pixel
++	 * clock must be exactly 12 MHz for the TV-out to work.
++	 * TODO: A multiple of 12 MHz for the PLL would work if the PLL would
++	 *       not be divided by 2 before being passed to the set of derived
++	 *       clocks that includes the LCD pixel clock.
++	 * TODO: Systemwide decisions like this should be made by the board
++	 *       support code, so add some kind of hook for that.
++	 */
++	unsigned long rate24 = (rate / 24000000) * 24000000;
++
++	jz_clk_pll_calc_dividers(rate24, &in_div, &feedback, &out_div);
++	return jz_clk_pll_calc_rate(in_div, feedback, out_div);
++}
++
+ static const int pllno[] = {1, 2, 2, 4};
+ 
+ static unsigned long jz_clk_pll_get_rate(struct clk *clk)
+ {
+ 	uint32_t val;
+-	int m;
+-	int n;
+-	int od;
++	unsigned int in_div, feedback, out_div;
+ 
+ 	val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
+ 
+ 	if (val & JZ_CLOCK_PLL_BYPASS)
+ 		return clk_get_rate(clk->parent);
+ 
+-	m = ((val >> 23) & 0x1ff) + 2;
+-	n = ((val >> 18) & 0x1f) + 2;
+-	od = (val >> 16) & 0x3;
++	feedback = ((val >> 23) & 0x1ff) + 2;
++	in_div = ((val >> 18) & 0x1f) + 2;
++	out_div = pllno[(val >> 16) & 0x3];
+ 
+-	return ((clk_get_rate(clk->parent) / n) * m) / pllno[od];
++	return jz_clk_pll_calc_rate(in_div, feedback, out_div);
+ }
+ 
+ static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
+@@ -235,7 +311,77 @@ static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
+ 	return jz_clk_pll_get_rate(clk->parent) >> 1;
+ }
+ 
+-static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
++#define SDRAM_TREF 15625   /* Refresh period: 4096 refresh cycles/64ms */
++
++static void sdram_set_pll(unsigned int pllin)
++{
++	unsigned int ns, sdramclock;
++
++	ns = 1000000000 / pllin;
++	sdramclock = (SDRAM_TREF / ns) / 64 + 1;
++	if (sdramclock > 0xff) sdramclock = 0xff;
++	/* Set refresh registers */
++	writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCOR);
++	writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCNT);
++}
++
++static int jz_clk_pll_set_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned int ctrl, plcr1;
++	unsigned int feedback, in_div, out_div, pllout, pllout2;
++
++	jz_clk_pll_calc_dividers(rate, &in_div, &feedback, &out_div);
++
++	ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
++	pllout = jz_clk_pll_calc_rate(in_div, feedback, out_div);
++	pllout2 = (ctrl & JZ_CLOCK_CTRL_PLL_HALF) ? pllout : (pllout / 2);
++
++	/* Init UHC clock */
++	writel(pllout2 / 48000000 - 1, jz_clock_base + JZ_REG_CLOCK_UHC);
++
++	plcr1 = ((feedback - 2) << JZ_CLOCK_PLL_M_OFFSET) |
++		((in_div - 2) << JZ_CLOCK_PLL_N_OFFSET) |
++		((out_div - 1) << JZ_CLOCK_PLL_OD_OFFSET) |
++		(0x20 << JZ_CLOCK_PLL_STABILIZE_OFFSET) |
++		JZ_CLOCK_PLL_ENABLED;
++
++	sdram_set_pll(pllout);
++
++	/* LCD pixclock */
++	writel(pllout2 / 12000000 - 1, jz_clock_base + JZ_REG_CLOCK_LCD);
++
++	/* configure PLL */
++	__asm__ __volatile__(
++		".set noreorder\n\t"
++		".align 5\n"
++		"sw %1,0(%0)\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		".set reorder\n\t"
++		:
++		: "r" (jz_clock_base + JZ_REG_CLOCK_PLL), "r" (plcr1));
++
++	/* MtH: For some reason the MSC will have problems if this flag is not
++	        restored, even though the MSC is supposedly the only divider
++	        that is not affected by this flag. */
++	jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_CHANGE_ENABLE);
++
++	return 0;
++}
++
++static const unsigned int jz_clk_main_divs[] = {
++	1, 2, 3, 4, 6, 8, 12, 16, 24, 32
++};
++static const unsigned int jz_clk_main_divs_inv[] = {
++	-1,  0,  1,  2,  3, -1,  4, -1,  5, -1, -1, -1,  6, -1, -1, -1,
++	 7, -1, -1, -1, -1, -1, -1, -1,  8, -1, -1, -1, -1, -1, -1, -1,
++	 9
++};
+ 
+ static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
+ {
+@@ -290,6 +436,64 @@ static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate)
+ 	return 0;
+ }
+ 
++static struct main_clk jz_clk_cpu;
++
++int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
++			  unsigned int mdiv, unsigned int pdiv)
++{
++	unsigned int cdiv_enc, hdiv_enc, mdiv_enc, pdiv_enc;
++	unsigned int ctrl;
++	unsigned int tmp, wait;
++
++	if (cdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
++	    hdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
++	    mdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
++	    pdiv >= ARRAY_SIZE(jz_clk_main_divs_inv))
++		return -EINVAL;
++	cdiv_enc = jz_clk_main_divs_inv[cdiv];
++	hdiv_enc = jz_clk_main_divs_inv[hdiv];
++	mdiv_enc = jz_clk_main_divs_inv[mdiv];
++	pdiv_enc = jz_clk_main_divs_inv[pdiv];
++	if (cdiv_enc == (unsigned int)-1 ||
++	    hdiv_enc == (unsigned int)-1 ||
++	    mdiv_enc == (unsigned int)-1 ||
++	    pdiv_enc == (unsigned int)-1)
++		return -EINVAL;
++
++	ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
++	ctrl &= ~(JZ_CLOCK_CTRL_CHANGE_ENABLE |
++		  JZ_CLOCK_CTRL_CDIV_MASK | JZ_CLOCK_CTRL_HDIV_MASK |
++		  JZ_CLOCK_CTRL_MDIV_MASK | JZ_CLOCK_CTRL_PDIV_MASK);
++	if (immediate) ctrl |= JZ_CLOCK_CTRL_CHANGE_ENABLE;
++	ctrl |= (cdiv_enc << JZ_CLOCK_CTRL_CDIV_OFFSET) |
++		(hdiv_enc << JZ_CLOCK_CTRL_HDIV_OFFSET) |
++		(mdiv_enc << JZ_CLOCK_CTRL_MDIV_OFFSET) |
++		(pdiv_enc << JZ_CLOCK_CTRL_PDIV_OFFSET);
++
++	/* set dividers */
++	/* delay loops lifted from the old Ingenic cpufreq driver */
++	wait = ((clk_get_rate(&jz_clk_cpu.clk) / 1000000) * 500) / 1000;
++	__asm__ __volatile__(
++		".set noreorder\n\t"
++		".align 5\n"
++		"sw %2,0(%1)\n\t"
++		"li %0,0\n\t"
++		"1:\n\t"
++		"bne %0,%3,1b\n\t"
++		"addi %0, 1\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		".set reorder\n\t"
++		: "=r" (tmp)
++		: "r" (jz_clock_base + JZ_REG_CLOCK_CTRL), "r" (ctrl),
++		  "r" (wait));
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(clk_main_set_dividers);
++
+ static struct clk_ops jz_clk_static_ops = {
+ 	.get_rate = jz_clk_static_get_rate,
+ 	.enable = jz_clk_enable_gating,
+@@ -307,6 +511,8 @@ static struct static_clk jz_clk_ext = {
+ 
+ static struct clk_ops jz_clk_pll_ops = {
+ 	.get_rate = jz_clk_pll_get_rate,
++	.set_rate = jz_clk_pll_set_rate,
++	.round_rate = jz_clk_pll_round_rate,
+ };
+ 
+ static struct clk jz_clk_pll = {
+@@ -897,6 +1103,10 @@ static int jz4740_clock_init(void)
+ 	if (!jz_clock_base)
+ 		return -EBUSY;
+ 
++	jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
++	if (!jz_emc_base)
++		return -EBUSY;
++
+ 	spin_lock_init(&jz_clock_lock);
+ 
+ 	jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
+diff --git a/arch/mips/jz4740/clock.h b/arch/mips/jz4740/clock.h
+index 5d07499..cc8d1db 100644
+--- a/arch/mips/jz4740/clock.h
++++ b/arch/mips/jz4740/clock.h
+@@ -17,6 +17,7 @@
+ #define __MIPS_JZ4740_CLOCK_H__
+ 
+ #include <linux/list.h>
++#include <linux/types.h>
+ 
+ struct jz4740_clock_board_data {
+ 	unsigned long ext_rate;
+@@ -63,6 +64,9 @@ struct clk {
+ 
+ int clk_is_enabled(struct clk *clk);
+ 
++int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
++			  unsigned int mdiv, unsigned int pdiv);
++
+ #ifdef CONFIG_DEBUG_FS
+ void jz4740_clock_debugfs_init(void);
+ void jz4740_clock_debugfs_add_clk(struct clk *clk);
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch b/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch
new file mode 100644
index 0000000..3461d1d
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch
@@ -0,0 +1,310 @@
+From d0f0d5739a31c12d349980ed05a670fa1e84696d Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Wed, 16 Mar 2011 03:16:04 +0100
+Subject: [PATCH 12/21] MIPS: JZ4740: Add cpufreq support.
+
+This is a squashed version of Uli's driver that was further developed in the opendingux-kernel repository.
+---
+ arch/mips/Kconfig                |    1 +
+ arch/mips/jz4740/Makefile        |    1 +
+ arch/mips/jz4740/cpufreq.c       |  226 ++++++++++++++++++++++++++++++++++++++
+ arch/mips/kernel/cpufreq/Kconfig |   13 ++-
+ 4 files changed, 240 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/jz4740/cpufreq.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index d46f1da..8128df7 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -209,6 +209,7 @@ config MACH_JZ4740
+ 	select HAVE_PWM
+ 	select HAVE_CLK
+ 	select GENERIC_IRQ_CHIP
++	select CPU_SUPPORTS_CPUFREQ
+ 
+ config LANTIQ
+ 	bool "Lantiq based platforms"
+diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
+index a9dff33..15f828e 100644
+--- a/arch/mips/jz4740/Makefile
++++ b/arch/mips/jz4740/Makefile
+@@ -16,5 +16,6 @@ obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
+ # PM support
+ 
+ obj-$(CONFIG_PM) += pm.o
++obj-$(CONFIG_CPU_FREQ_JZ) += cpufreq.o
+ 
+ ccflags-y := -Werror -Wall
+diff --git a/arch/mips/jz4740/cpufreq.c b/arch/mips/jz4740/cpufreq.c
+new file mode 100644
+index 0000000..aa41e9f
+--- /dev/null
++++ b/arch/mips/jz4740/cpufreq.c
+@@ -0,0 +1,226 @@
++/*
++ * linux/arch/mips/jz4740/cpufreq.c
++ *
++ * cpufreq driver for JZ4740
++ *
++ * Copyright (c) 2010       Ulrich Hecht <ulrich.hecht@gmail.com>
++ * Copyright (c) 2010       Maarten ter Huurne <maarten@treewalker.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/err.h>
++
++#include <linux/cpufreq.h>
++
++#include <linux/clk.h>
++#include <asm/mach-jz4740/base.h>
++
++#include "clock.h"
++
++#define DEBUG_CPUFREQ
++
++#ifdef DEBUG_CPUFREQ
++#define dprintk(X...) printk(KERN_INFO X)
++#else
++#define dprintk(X...) do { } while(0)
++#endif
++
++#define HCLK_MIN 30000
++/* TODO: The maximum MCLK most likely depends on the SDRAM chips used,
++         so it is board-specific. */
++#define MCLK_MAX 140000
++
++/* Same as jz_clk_main_divs, but with 24 and 32 removed because the hardware
++   spec states those dividers must not be used for CCLK or HCLK. */
++static const unsigned int jz4740_freq_cpu_divs[] = {1, 2, 3, 4, 6, 8, 12, 16};
++
++struct jz4740_freq_percpu_info {
++	unsigned int pll_rate;
++	struct cpufreq_frequency_table table[
++		ARRAY_SIZE(jz4740_freq_cpu_divs) + 1];
++};
++
++static struct clk *pll;
++static struct clk *cclk;
++
++static struct jz4740_freq_percpu_info jz4740_freq_info;
++
++static struct cpufreq_driver cpufreq_jz4740_driver;
++
++static void jz4740_freq_fill_table(struct cpufreq_policy *policy,
++				   unsigned int pll_rate)
++{
++	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
++	int i;
++
++#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
++	/* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
++	static bool init = false;
++	if (init)
++		cpufreq_frequency_table_put_attr(policy->cpu);
++	else
++		init = true;
++#endif
++
++	jz4740_freq_info.pll_rate = pll_rate;
++
++	for (i = 0; i < ARRAY_SIZE(jz4740_freq_cpu_divs); i++) {
++		unsigned int freq = pll_rate / jz4740_freq_cpu_divs[i];
++		if (freq < HCLK_MIN) break;
++		table[i].index = i;
++		table[i].frequency = freq;
++	}
++	table[i].index = i;
++	table[i].frequency = CPUFREQ_TABLE_END;
++
++	policy->min = table[i - 1].frequency;
++	policy->max = table[0].frequency;
++
++#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
++	cpufreq_frequency_table_get_attr(table, policy->cpu);
++#endif
++}
++
++static unsigned int jz4740_freq_get(unsigned int cpu)
++{
++	return clk_get_rate(cclk) / 1000;
++}
++
++static int jz4740_freq_verify(struct cpufreq_policy *policy)
++{
++	unsigned int new_pll;
++
++	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
++				     policy->cpuinfo.max_freq);
++
++	new_pll = clk_round_rate(pll, policy->max * 1000) / 1000;
++	if (jz4740_freq_info.pll_rate != new_pll)
++		jz4740_freq_fill_table(policy, new_pll);
++
++	return 0;
++}
++
++static int jz4740_freq_target(struct cpufreq_policy *policy,
++			  unsigned int target_freq,
++			  unsigned int relation)
++{
++	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
++	struct cpufreq_freqs freqs;
++	unsigned int new_index = 0;
++	unsigned int old_pll = clk_get_rate(pll) / 1000;
++	unsigned int new_pll = jz4740_freq_info.pll_rate;
++	int ret = 0;
++
++	if (cpufreq_frequency_table_target(policy, table,
++					   target_freq, relation, &new_index))
++		return -EINVAL;
++	freqs = (struct cpufreq_freqs) {
++		.old = jz4740_freq_get(policy->cpu),
++		.new = table[new_index].frequency,
++		.cpu = policy->cpu,
++		.flags = cpufreq_jz4740_driver.flags,
++	};
++	if (freqs.new != freqs.old || new_pll != old_pll) {
++		unsigned int cdiv, hdiv, mdiv, pdiv;
++		cdiv = jz4740_freq_cpu_divs[new_index];
++		hdiv = (cdiv == 3 || cdiv == 6) ? cdiv * 2 : cdiv * 3;
++		while (new_pll < HCLK_MIN * hdiv)
++			hdiv -= cdiv;
++		mdiv = hdiv;
++		if (new_pll > MCLK_MAX * mdiv) {
++			/* 4,4 performs better than 3,6 */
++			if (new_pll > MCLK_MAX * 4)
++				mdiv *= 2;
++			else
++				hdiv = mdiv = cdiv * 4;
++		}
++		pdiv = mdiv;
++		dprintk(KERN_INFO "%s: cclk %p, setting from %d to %d, "
++			"dividers %d, %d, %d, %d\n",
++			__FUNCTION__, cclk, freqs.old, freqs.new,
++			cdiv, hdiv, mdiv, pdiv);
++		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++		ret = clk_main_set_dividers(new_pll == old_pll,
++					    cdiv, hdiv, mdiv, pdiv);
++		if (ret) {
++			dprintk(KERN_INFO "failed to set dividers\n");
++		} else if (new_pll != old_pll) {
++			dprintk(KERN_INFO "%s: pll %p, setting from %d to %d\n",
++				__FUNCTION__, pll, old_pll, new_pll);
++			ret = clk_set_rate(pll, new_pll * 1000);
++		}
++		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++	}
++
++	return ret;
++}
++
++static int jz4740_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++	int ret;
++
++	dprintk(KERN_INFO "Jz4740 cpufreq driver\n");
++
++	if (policy->cpu != 0)
++		return -EINVAL;
++
++	pll = clk_get(NULL, "pll");
++	if (IS_ERR(pll)) {
++		ret = PTR_ERR(pll);
++		goto err_exit;
++	}
++
++	cclk = clk_get(NULL, "cclk");
++	if (IS_ERR(cclk)) {
++		ret = PTR_ERR(cclk);
++		goto err_clk_put_pll;
++	}
++
++	policy->cpuinfo.min_freq = HCLK_MIN;
++	policy->cpuinfo.max_freq = 500000;
++	policy->cpuinfo.transition_latency = 100000; /* in nanoseconds */
++	policy->cur = jz4740_freq_get(policy->cpu);
++	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
++	/* min and max are set by jz4740_freq_fill_table() */
++
++	jz4740_freq_fill_table(policy, clk_get_rate(pll) / 1000 /* in kHz */);
++
++	return 0;
++
++err_clk_put_pll:
++	clk_put(pll);
++err_exit:
++	return ret;
++}
++
++static struct cpufreq_driver cpufreq_jz4740_driver = {
++	.init	= jz4740_cpufreq_driver_init,
++	.verify	= jz4740_freq_verify,
++	.target	= jz4740_freq_target,
++	.get	= jz4740_freq_get,
++	.name	= "jz4740",
++};
++
++static int __init jz4740_cpufreq_init(void)
++{
++	return cpufreq_register_driver(&cpufreq_jz4740_driver);
++}
++
++static void __exit jz4740_cpufreq_exit(void)
++{
++	cpufreq_unregister_driver(&cpufreq_jz4740_driver);
++}
++
++module_init(jz4740_cpufreq_init);
++module_exit(jz4740_cpufreq_exit);
++
++MODULE_AUTHOR("Ulrich Hecht <ulrich.hecht@gmail.com>, "
++	      "Maarten ter Huurne <maarten@treewalker.org>");
++MODULE_DESCRIPTION("cpufreq driver for Jz4740");
++MODULE_LICENSE("GPL");
+diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig
+index 58c601e..11af8e8 100644
+--- a/arch/mips/kernel/cpufreq/Kconfig
++++ b/arch/mips/kernel/cpufreq/Kconfig
+@@ -8,7 +8,7 @@ config MIPS_EXTERNAL_TIMER
+ config MIPS_CPUFREQ
+ 	bool
+ 	default y
+-	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
++	depends on CPU_SUPPORTS_CPUFREQ
+ 
+ if MIPS_CPUFREQ
+ 
+@@ -24,6 +24,7 @@ config LOONGSON2_CPUFREQ
+ 	tristate "Loongson2 CPUFreq Driver"
+ 	select CPU_FREQ_TABLE
+ 	depends on MIPS_CPUFREQ
++	depends on MIPS_EXTERNAL_TIMER
+ 	help
+ 	  This option adds a CPUFreq driver for loongson processors which
+ 	  support software configurable cpu frequency.
+@@ -34,6 +35,16 @@ config LOONGSON2_CPUFREQ
+ 
+ 	  If in doubt, say N.
+ 
++config CPU_FREQ_JZ
++	tristate "CPUfreq driver for JZ CPUs"
++	select CPU_FREQ_TABLE
++	depends on MACH_JZ4740
++	default n
++	help
++	  This enables the CPUfreq driver for JZ CPUs.
++
++	  If in doubt, say N.
++
+ endif	# CPU_FREQ
+ 
+ endmenu
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch b/target/linux/xburst/patches-3.2/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch
new file mode 100644
index 0000000..da1c4f1
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch
@@ -0,0 +1,134 @@
+From b95144c1b702f98c7902c75beb83f323701eb7c5 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Sun, 19 Jun 2011 10:57:18 +0200
+Subject: [PATCH 13/21] MMC: JZ4740: Added support for CPU frequency changing.
+
+The MSC device clock is stopped before the frequency change.
+After the change a new divider is computed and the clock is restarted.
+Also the frequency change is postponed if an I/O operation is in progress.
+---
+ drivers/mmc/host/jz4740_mmc.c |   69 +++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 67 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
+index 74218ad..6e40f1b 100644
+--- a/drivers/mmc/host/jz4740_mmc.c
++++ b/drivers/mmc/host/jz4740_mmc.c
+@@ -23,6 +23,7 @@
+ #include <linux/delay.h>
+ #include <linux/scatterlist.h>
+ #include <linux/clk.h>
++#include <linux/cpufreq.h>
+ 
+ #include <linux/bitops.h>
+ #include <linux/gpio.h>
+@@ -685,6 +686,60 @@ static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+ 	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable);
+ }
+ 
++#ifdef CONFIG_CPU_FREQ
++
++static struct jz4740_mmc_host *cpufreq_host;
++
++static int jz4740_mmc_cpufreq_transition(struct notifier_block *nb,
++					 unsigned long val, void *data)
++{
++	/* TODO: We only have to take action when the PLL freq changes:
++	         the main dividers have no influence on the MSC device clock. */
++
++	if (val == CPUFREQ_PRECHANGE) {
++		mmc_claim_host(cpufreq_host->mmc);
++		clk_disable(cpufreq_host->clk);
++	} else if (val == CPUFREQ_POSTCHANGE) {
++		struct mmc_ios *ios = &cpufreq_host->mmc->ios;
++		if (ios->clock)
++			jz4740_mmc_set_clock_rate(cpufreq_host, ios->clock);
++		if (ios->power_mode != MMC_POWER_OFF)
++			clk_enable(cpufreq_host->clk);
++		mmc_release_host(cpufreq_host->mmc);
++	}
++	return 0;
++}
++
++static struct notifier_block jz4740_mmc_cpufreq_nb = {
++	.notifier_call = jz4740_mmc_cpufreq_transition,
++};
++
++static inline int jz4740_mmc_cpufreq_register(struct jz4740_mmc_host *host)
++{
++	cpufreq_host = host;
++	return cpufreq_register_notifier(&jz4740_mmc_cpufreq_nb,
++					 CPUFREQ_TRANSITION_NOTIFIER);
++}
++
++static inline void jz4740_mmc_cpufreq_unregister(void)
++{
++	cpufreq_unregister_notifier(&jz4740_mmc_cpufreq_nb,
++				    CPUFREQ_TRANSITION_NOTIFIER);
++}
++
++#else
++
++static inline int jz4740_mmc_cpufreq_register(struct jz4740_mmc_host *host)
++{
++	return 0;
++}
++
++static inline void jz4740_mmc_cpufreq_unregister(void)
++{
++}
++
++#endif
++
+ static const struct mmc_host_ops jz4740_mmc_ops = {
+ 	.request	= jz4740_mmc_request,
+ 	.set_ios	= jz4740_mmc_set_ios,
+@@ -834,11 +889,18 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
+ 		goto err_free_host;
+ 	}
+ 
++	ret = jz4740_mmc_cpufreq_register(host);
++	if (ret) {
++		dev_err(&pdev->dev,
++			"Failed to register cpufreq transition notifier\n");
++		goto err_clk_put;
++	}
++
+ 	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!host->mem) {
+ 		ret = -ENOENT;
+ 		dev_err(&pdev->dev, "Failed to get base platform memory\n");
+-		goto err_clk_put;
++		goto err_cpufreq_unreg;
+ 	}
+ 
+ 	host->mem = request_mem_region(host->mem->start,
+@@ -846,7 +908,7 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
+ 	if (!host->mem) {
+ 		ret = -EBUSY;
+ 		dev_err(&pdev->dev, "Failed to request base memory region\n");
+-		goto err_clk_put;
++		goto err_cpufreq_unreg;
+ 	}
+ 
+ 	host->base = ioremap_nocache(host->mem->start, resource_size(host->mem));
+@@ -929,6 +991,8 @@ err_iounmap:
+ 	iounmap(host->base);
+ err_release_mem_region:
+ 	release_mem_region(host->mem->start, resource_size(host->mem));
++err_cpufreq_unreg:
++	jz4740_mmc_cpufreq_unregister();
+ err_clk_put:
+ 	clk_put(host->clk);
+ err_free_host:
+@@ -958,6 +1022,7 @@ static int __devexit jz4740_mmc_remove(struct platform_device *pdev)
+ 	iounmap(host->base);
+ 	release_mem_region(host->mem->start, resource_size(host->mem));
+ 
++	jz4740_mmc_cpufreq_unregister();
+ 	clk_put(host->clk);
+ 
+ 	platform_set_drvdata(pdev, NULL);
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch b/target/linux/xburst/patches-3.2/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch
new file mode 100644
index 0000000..6a49e35
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch
@@ -0,0 +1,95 @@
+From 2dcb0ca66d0bffc23d5f001fad81fb1a7a2c371b Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Tue, 28 Jun 2011 22:28:59 +0200
+Subject: [PATCH 14/21] MIPS: JZ4740: reset: Initialize hibernate wakeup
+ counters.
+
+In hibernation mode only the wakeup logic and the RTC are left running,
+so this is what users perceive as power down.
+
+If the counters are not initialized, the corresponding pin (typically
+connected to the power button) has to be asserted for two seconds
+before the device wakes up. Most users expect a shorter wakeup time.
+
+I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for
+the Dingoo A320 kernel.
+---
+ arch/mips/jz4740/reset.c |   46 ++++++++++++++++++++++++++++++++++++++++------
+ 1 files changed, 40 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
+index 5f1fb95..e6d1d7b 100644
+--- a/arch/mips/jz4740/reset.c
++++ b/arch/mips/jz4740/reset.c
+@@ -21,6 +21,9 @@
+ #include <asm/mach-jz4740/base.h>
+ #include <asm/mach-jz4740/timer.h>
+ 
++#include "reset.h"
++#include "clock.h"
++
+ static void jz4740_halt(void)
+ {
+ 	while (1) {
+@@ -53,21 +56,52 @@ static void jz4740_restart(char *command)
+ 	jz4740_halt();
+ }
+ 
+-#define JZ_REG_RTC_CTRL		0x00
+-#define JZ_REG_RTC_HIBERNATE	0x20
++#define JZ_REG_RTC_CTRL			0x00
++#define JZ_REG_RTC_HIBERNATE		0x20
++#define JZ_REG_RTC_WAKEUP_FILTER	0x24
++#define JZ_REG_RTC_RESET_COUNTER	0x28
+ 
+-#define JZ_RTC_CTRL_WRDY	BIT(7)
++#define JZ_RTC_CTRL_WRDY		BIT(7)
++#define JZ_RTC_WAKEUP_FILTER_MASK	0x0000FFE0
++#define JZ_RTC_RESET_COUNTER_MASK	0x00000FE0
+ 
+-static void jz4740_power_off(void)
++static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
+ {
+-	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
+ 	uint32_t ctrl;
+-
+ 	do {
+ 		ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
+ 	} while (!(ctrl & JZ_RTC_CTRL_WRDY));
++}
+ 
++static void jz4740_power_off(void)
++{
++	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
++	unsigned long long wakeup_filter_ticks;
++	unsigned long long reset_counter_ticks;
++
++	/* Set minimum wakeup pin assertion time: 100 ms.
++	   Range is 0 to 2 sec if RTC is clocked at 32 kHz. */
++	wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
++	if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
++		wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
++	else
++		wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
++	jz4740_rtc_wait_ready(rtc_base);
++	writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
++
++	/* Set reset pin low-level assertion time after wakeup: 60 ms.
++	   Range is 0 to 125 ms if RTC is clocked at 32 kHz. */
++	reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
++	if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
++		reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
++	else
++		reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
++	jz4740_rtc_wait_ready(rtc_base);
++	writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
++
++	jz4740_rtc_wait_ready(rtc_base);
+ 	writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
++
+ 	jz4740_halt();
+ }
+ 
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch b/target/linux/xburst/patches-3.2/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch
new file mode 100644
index 0000000..2bf28ce
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch
@@ -0,0 +1,36 @@
+From 515f8006c03e1065bf98c9148a9ea787e2d120d3 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Wed, 10 Aug 2011 00:20:16 +0200
+Subject: [PATCH 15/21] ASoC: JZ4740: Replaced comma operators with
+ semicolons.
+
+They were harmless but also unnecessary, probably a leftover from earlier code.
+---
+ sound/soc/jz4740/jz4740-i2s.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
+index cd22a54..d28b4cc 100644
+--- a/sound/soc/jz4740/jz4740-i2s.c
++++ b/sound/soc/jz4740/jz4740-i2s.c
+@@ -346,7 +346,7 @@ static void jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s)
+ 
+ 	/* Playback */
+ 	dma_config = &i2s->pcm_config_playback.dma_config;
+-	dma_config->src_width = JZ4740_DMA_WIDTH_32BIT,
++	dma_config->src_width = JZ4740_DMA_WIDTH_32BIT;
+ 	dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+ 	dma_config->request_type = JZ4740_DMA_TYPE_AIC_TRANSMIT;
+ 	dma_config->flags = JZ4740_DMA_SRC_AUTOINC;
+@@ -355,7 +355,7 @@ static void jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s)
+ 
+ 	/* Capture */
+ 	dma_config = &i2s->pcm_config_capture.dma_config;
+-	dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT,
++	dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT;
+ 	dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+ 	dma_config->request_type = JZ4740_DMA_TYPE_AIC_RECEIVE;
+ 	dma_config->flags = JZ4740_DMA_DST_AUTOINC;
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch b/target/linux/xburst/patches-3.2/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch
new file mode 100644
index 0000000..5c300a2
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch
@@ -0,0 +1,94 @@
+From 8a5087fe59e31efb8641e704058328997c3c8ff1 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Wed, 10 Aug 2011 00:25:11 +0200
+Subject: [PATCH 16/21] ASoC: JZ4740: Support buffer size that is not a
+ multiple of period size.
+
+This fixes glitches triggered by libao, which sets time-based intervals
+instead of byte-based intervals like SDL does.
+
+Thanks to Paul Cercueil for figuring out that the buffer size was causing
+the glitches and to Lars Clausen for helping me write the fix.
+---
+ sound/soc/jz4740/jz4740-pcm.c |   21 ++++++++++++++++++---
+ 1 files changed, 18 insertions(+), 3 deletions(-)
+
+diff --git a/sound/soc/jz4740/jz4740-pcm.c b/sound/soc/jz4740/jz4740-pcm.c
+index d1989cd..1f9a005 100644
+--- a/sound/soc/jz4740/jz4740-pcm.c
++++ b/sound/soc/jz4740/jz4740-pcm.c
+@@ -31,6 +31,7 @@
+ 
+ struct jz4740_runtime_data {
+ 	unsigned long dma_period;
++	unsigned long dma_period_left;
+ 	dma_addr_t dma_start;
+ 	dma_addr_t dma_pos;
+ 	dma_addr_t dma_end;
+@@ -67,10 +68,13 @@ static void jz4740_pcm_start_transfer(struct jz4740_runtime_data *prtd,
+ 	if (prtd->dma_pos == prtd->dma_end)
+ 		prtd->dma_pos = prtd->dma_start;
+ 
+-	if (prtd->dma_pos + prtd->dma_period > prtd->dma_end)
++	if (prtd->dma_period_left == 0)
++		prtd->dma_period_left = prtd->dma_period;
++
++	if (prtd->dma_pos + prtd->dma_period_left > prtd->dma_end)
+ 		count = prtd->dma_end - prtd->dma_pos;
+ 	else
+-		count = prtd->dma_period;
++		count = prtd->dma_period_left;
+ 
+ 	jz4740_dma_disable(prtd->dma);
+ 
+@@ -85,6 +89,7 @@ static void jz4740_pcm_start_transfer(struct jz4740_runtime_data *prtd,
+ 	jz4740_dma_set_transfer_count(prtd->dma, count);
+ 
+ 	prtd->dma_pos += count;
++	prtd->dma_period_left -= count;
+ 
+ 	jz4740_dma_enable(prtd->dma);
+ }
+@@ -96,7 +101,8 @@ static void jz4740_pcm_dma_transfer_done(struct jz4740_dma_chan *dma, int err,
+ 	struct snd_pcm_runtime *runtime = substream->runtime;
+ 	struct jz4740_runtime_data *prtd = runtime->private_data;
+ 
+-	snd_pcm_period_elapsed(substream);
++	if (prtd->dma_period_left == 0)
++		snd_pcm_period_elapsed(substream);
+ 
+ 	jz4740_pcm_start_transfer(prtd, substream);
+ }
+@@ -133,6 +139,7 @@ static int jz4740_pcm_hw_params(struct snd_pcm_substream *substream,
+ 	runtime->dma_bytes = params_buffer_bytes(params);
+ 
+ 	prtd->dma_period = params_period_bytes(params);
++	prtd->dma_period_left = 0;
+ 	prtd->dma_start = runtime->dma_addr;
+ 	prtd->dma_pos = prtd->dma_start;
+ 	prtd->dma_end = prtd->dma_start + runtime->dma_bytes;
+@@ -160,6 +167,7 @@ static int jz4740_pcm_prepare(struct snd_pcm_substream *substream)
+ 	if (!prtd->dma)
+ 		return -EBUSY;
+ 
++	prtd->dma_period_left = 0;
+ 	prtd->dma_pos = prtd->dma_start;
+ 
+ 	return 0;
+@@ -219,6 +227,13 @@ static int jz4740_pcm_open(struct snd_pcm_substream *substream)
+ 	if (prtd == NULL)
+ 		return -ENOMEM;
+ 
++	/* Force period and buffer size to be a multiple of the DMA transfer
++	 * size, which is 16 bytes. */
++	snd_pcm_hw_constraint_step(runtime, 0,
++				   SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
++	snd_pcm_hw_constraint_step(runtime, 0,
++				   SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
++
+ 	snd_soc_set_runtime_hwparams(substream, &jz4740_pcm_hardware);
+ 
+ 	runtime->private_data = prtd;
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch b/target/linux/xburst/patches-3.2/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch
new file mode 100644
index 0000000..3fd3f95
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch
@@ -0,0 +1,26 @@
+From cdb15b56aa9517a8cdbd14724088227514622a1b Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Wed, 11 Jan 2012 22:36:03 +0100
+Subject: [PATCH 17/21] MIPS: JZ4740: qi_lb60: Look for NAND chip in bank 1.
+
+All NanoNotes have their NAND in bank 1.
+Specifying the bank is required since commit e7ca5a665877a030.
+---
+ arch/mips/jz4740/board-qi_lb60.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index b622941..f2d94c1 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -140,6 +140,7 @@ static void qi_lb60_nand_ident(struct platform_device *pdev,
+ static struct jz_nand_platform_data qi_lb60_nand_pdata = {
+ 	.ident_callback = qi_lb60_nand_ident,
+ 	.busy_gpio = 94,
++	.banks = { 1 },
+ };
+ 
+ /* Keyboard*/
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch b/target/linux/xburst/patches-3.2/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch
new file mode 100644
index 0000000..bb2317f
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch
@@ -0,0 +1,128 @@
+From 94f2b91d2a42854a8869d54a758bc88757d7f6d9 Mon Sep 17 00:00:00 2001
+From: Axel Lin <axel.lin@gmail.com>
+Date: Fri, 6 Jan 2012 11:30:10 +0800
+Subject: [PATCH 18/21] ASoC: jz4740: Convert qi_lb60 to use
+ snd_soc_register_card()
+
+Use snd_soc_register_card() instead of creating a "soc-audio" platform device.
+
+Signed-off-by: Axel Lin <axel.lin@gmail.com>
+---
+ arch/mips/jz4740/board-qi_lb60.c |    6 ++++
+ sound/soc/jz4740/qi_lb60.c       |   56 +++++++++++++++++--------------------
+ 2 files changed, 32 insertions(+), 30 deletions(-)
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index f2d94c1..be14dfb 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -418,6 +418,11 @@ static struct platform_device qi_lb60_charger_device = {
+ 	},
+ };
+ 
++/* audio */
++static struct platform_device qi_lb60_audio_device = {
++	.name = "qi-lb60-audio",
++	.id = -1,
++};
+ 
+ static struct platform_device *jz_platform_devices[] __initdata = {
+ 	&jz4740_udc_device,
+@@ -434,6 +439,7 @@ static struct platform_device *jz_platform_devices[] __initdata = {
+ 	&qi_lb60_gpio_keys,
+ 	&qi_lb60_pwm_beeper,
+ 	&qi_lb60_charger_device,
++	&qi_lb60_audio_device,
+ };
+ 
+ static void __init board_gpio_setup(void)
+diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c
+index c5fc339..67ddbdd 100644
+--- a/sound/soc/jz4740/qi_lb60.c
++++ b/sound/soc/jz4740/qi_lb60.c
+@@ -90,56 +90,52 @@ static struct snd_soc_card qi_lb60 = {
+ 	.num_dapm_routes = ARRAY_SIZE(qi_lb60_routes),
+ };
+ 
+-static struct platform_device *qi_lb60_snd_device;
+-
+ static const struct gpio qi_lb60_gpios[] = {
+ 	{ QI_LB60_SND_GPIO, GPIOF_OUT_INIT_LOW, "SND" },
+ 	{ QI_LB60_AMP_GPIO, GPIOF_OUT_INIT_LOW, "AMP" },
+ };
+ 
+-static int __init qi_lb60_init(void)
++static int __devinit qi_lb60_probe(struct platform_device *pdev)
+ {
++	struct snd_soc_card *card = &qi_lb60;
+ 	int ret;
+ 
+-	qi_lb60_snd_device = platform_device_alloc("soc-audio", -1);
+-
+-	if (!qi_lb60_snd_device)
+-		return -ENOMEM;
+-
+ 	ret = gpio_request_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
+-	if (ret) {
+-		pr_err("qi_lb60 snd: Failed to request gpios: %d\n", ret);
+-		goto err_device_put;
+-	}
++	if (ret)
++		return ret;
+ 
+-	platform_set_drvdata(qi_lb60_snd_device, &qi_lb60);
++	card->dev = &pdev->dev;
+ 
+-	ret = platform_device_add(qi_lb60_snd_device);
++	ret = snd_soc_register_card(card);
+ 	if (ret) {
+-		pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret);
+-		goto err_unset_pdata;
++		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
++			ret);
++		gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
+ 	}
+-
+-	 return 0;
+-
+-err_unset_pdata:
+-	platform_set_drvdata(qi_lb60_snd_device, NULL);
+-/*err_gpio_free_array:*/
+-	gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
+-err_device_put:
+-	platform_device_put(qi_lb60_snd_device);
+-
+ 	return ret;
+ }
+-module_init(qi_lb60_init);
+ 
+-static void __exit qi_lb60_exit(void)
++static int __devexit qi_lb60_remove(struct platform_device *pdev)
+ {
+-	platform_device_unregister(qi_lb60_snd_device);
++	struct snd_soc_card *card = platform_get_drvdata(pdev);
++
++	snd_soc_unregister_card(card);
+ 	gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
++	return 0;
+ }
+-module_exit(qi_lb60_exit);
++
++static struct platform_driver qi_lb60_driver = {
++	.driver		= {
++		.name	= "qi-lb60-audio",
++		.owner	= THIS_MODULE,
++	},
++	.probe		= qi_lb60_probe,
++	.remove		= __devexit_p(qi_lb60_remove),
++};
++
++module_platform_driver(qi_lb60_driver);
+ 
+ MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+ MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
+ MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qi-lb60-audio");
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch b/target/linux/xburst/patches-3.2/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch
new file mode 100644
index 0000000..199b1e6
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch
@@ -0,0 +1,43 @@
+From 159c4d81899db05a57bc4a0d55083e484c3d8a43 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 24 Apr 2010 12:23:28 +0200
+Subject: [PATCH 19/21] Framebuffer notifier: Call notifier callbacks prior to
+ blanking the screen
+
+---
+ drivers/video/fbmem.c |    8 ++++++--
+ 1 files changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
+index ad93629..e13e6bf 100644
+--- a/drivers/video/fbmem.c
++++ b/drivers/video/fbmem.c
+@@ -1032,12 +1032,12 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
+ int
+ fb_blank(struct fb_info *info, int blank)
+ {	
+- 	int ret = -EINVAL;
++ 	int ret = 0;
+ 
+  	if (blank > FB_BLANK_POWERDOWN)
+  		blank = FB_BLANK_POWERDOWN;
+ 
+-	if (info->fbops->fb_blank)
++	if (info->fbops->fb_blank && blank == FB_BLANK_UNBLANK)
+  		ret = info->fbops->fb_blank(blank, info);
+ 
+  	if (!ret) {
+@@ -1048,6 +1048,10 @@ fb_blank(struct fb_info *info, int blank)
+ 		fb_notifier_call_chain(FB_EVENT_BLANK, &event);
+ 	}
+ 
++	if (info->fbops->fb_blank && blank != FB_BLANK_UNBLANK)
++ 		ret = info->fbops->fb_blank(blank, info);
++
++
+  	return ret;
+ }
+ 
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0020-qi_lb60-NAND-add-data-partition.patch b/target/linux/xburst/patches-3.2/0020-qi_lb60-NAND-add-data-partition.patch
new file mode 100644
index 0000000..5121ddc
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0020-qi_lb60-NAND-add-data-partition.patch
@@ -0,0 +1,31 @@
+From 1d7ef3445db5aebf48c90b20e18630633623c750 Mon Sep 17 00:00:00 2001
+From: Xiangfu Liu <xiangfu@macbook.(none)>
+Date: Fri, 19 Aug 2011 15:46:52 +0800
+Subject: [PATCH 20/21] qi_lb60: NAND: add data partition
+
+---
+ arch/mips/jz4740/board-qi_lb60.c |    7 ++++++-
+ 1 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index be14dfb..4e24b95 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -118,8 +118,13 @@ static struct mtd_partition qi_lb60_partitions_2gb[] = {
+ 	{
+ 		.name = "NAND ROOTFS partition",
+ 		.offset = 8 * 0x100000,
+-		.size = (504 + 512 + 1024) * 0x100000,
++		.size = 512 * 0x100000,
+ 	},
++        { 
++		.name = "NAND DATA partition",
++          	.offset = 520 * 0x100000,
++          	.size = 1528 * 0x100000,
++        },
+ };
+ 
+ static void qi_lb60_nand_ident(struct platform_device *pdev,
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/patches-3.2/0021-rtc-jz4740-fix-hwclock-give-time-out.patch b/target/linux/xburst/patches-3.2/0021-rtc-jz4740-fix-hwclock-give-time-out.patch
new file mode 100644
index 0000000..b661f6d
--- /dev/null
+++ b/target/linux/xburst/patches-3.2/0021-rtc-jz4740-fix-hwclock-give-time-out.patch
@@ -0,0 +1,25 @@
+From a37ca6eb8cb52d620feff3323a3be4da24f5bee8 Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Fri, 16 Mar 2012 17:48:45 +0800
+Subject: [PATCH 21/21] rtc: jz4740 fix hwclock give time out
+
+---
+ drivers/rtc/rtc-jz4740.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
+index b647363..50c5df0 100644
+--- a/drivers/rtc/rtc-jz4740.c
++++ b/drivers/rtc/rtc-jz4740.c
+@@ -280,6 +280,8 @@ static int __devinit jz4740_rtc_probe(struct platform_device *pdev)
+ 		}
+ 	}
+ 
++	jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ_IRQ, 1);
++
+ 	return 0;
+ 
+ err_free_irq:
+-- 
+1.7.5.4
+
diff --git a/target/linux/xburst/qi_lb60/config-2.6.36 b/target/linux/xburst/qi_lb60/config-2.6.36
deleted file mode 100644
index f313550..0000000
--- a/target/linux/xburst/qi_lb60/config-2.6.36
+++ /dev/null
@@ -1,17 +0,0 @@
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_FB_JZ4740=y
-# CONFIG_FB_TMIO is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_INPUT_PWM_BEEPER=y
-CONFIG_JZ4740_QI_LB60=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-CONFIG_LOGO=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_JZ4740_ADC=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
diff --git a/target/linux/xburst/qi_lb60/config-2.6.37 b/target/linux/xburst/qi_lb60/config-2.6.37
deleted file mode 100644
index f313550..0000000
--- a/target/linux/xburst/qi_lb60/config-2.6.37
+++ /dev/null
@@ -1,17 +0,0 @@
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_FB_JZ4740=y
-# CONFIG_FB_TMIO is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_INPUT_PWM_BEEPER=y
-CONFIG_JZ4740_QI_LB60=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-CONFIG_LOGO=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_JZ4740_ADC=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
diff --git a/target/linux/xburst/qi_lb60/config-3.2 b/target/linux/xburst/qi_lb60/config-3.2
new file mode 100644
index 0000000..7c3f91b
--- /dev/null
+++ b/target/linux/xburst/qi_lb60/config-3.2
@@ -0,0 +1,94 @@
+CONFIG_DEVMEM=y
+CONFIG_FB_JZ4740=y
+# CONFIG_FB_TMIO is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_INPUT_PWM_BEEPER=y
+CONFIG_JZ4740_QI_LB60=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_OPENWRT_CLUT224 is not set
+CONFIG_LOGO_NANONOTE_CLUT224=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC=y
+CONFIG_SND_JZ4740_SOC_QI_LB60=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_JZCODEC=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+# CONFIG_SND_VIRMIDI is not set
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+
+# CONFIG_IEEE802154 is not set
+# CONFIG_IEEE802154_6LOWPAN is not set
+# CONFIG_MAC802154 is not set
+# CONFIG_MAC802154_DEBUG is not set
+# CONFIG_IEEE802154_DRIVER_DEBUG is not set
+# CONFIG_IEEE802154_DRIVER is not set
+# CONFIG_IEEE802154_SERIAL is not set
+# CONFIG_SPI_ATUSB is not set
+# CONFIG_SPI_ATBEN is not set
+# CONFIG_IEEE802154_AT86RF230 is not set
+# CONFIG_IEEE802154_FAKEHARD is not set
+# CONFIG_IEEE802154_FAKELB is not set
+# CONFIG_IEEE802154_CC2420 is not set
+# CONFIG_IEEE802154_ADF7242 is not set
+
+# CONFIG_SENSORS_JZ4740 is not set
+
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_LCD_ILI8960=y
+
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+
+# CONFIG_USB_RENESAS_USBHS is not set
+
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+# CONFIG_USB_FUSB300 is not set
+CONFIG_USB_JZ4740=y
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_NET2272 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_ETH_RNDIS is not set
diff --git a/target/linux/xburst/qi_lb60/target.mk b/target/linux/xburst/qi_lb60/target.mk
index 7477225..8ae71bd 100644
--- a/target/linux/xburst/qi_lb60/target.mk
+++ b/target/linux/xburst/qi_lb60/target.mk
@@ -1,8 +1 @@
 BOARDNAME:=QI Ben Nanonote (qi_lb60)
-DEFAULT_PACKAGES += \
-	kmod-sound-core \
-	kmod-sound-soc-core \
-	kmod-sound-soc-jz4740 \
-	kmod-sound-soc-jz4740-codec \
-	kmod-sound-soc-qilb60 \
-