remove 3.1 support

SVN-Revision: 30823

43 files changed, 0 insertions, 5334 deletions

diff --git a/target/linux/brcm63xx/config-3.1 b/target/linux/brcm63xx/config-3.1
deleted file mode 100644
index be06207..0000000
--- a/target/linux/brcm63xx/config-3.1
+++ /dev/null
@@ -1,155 +0,0 @@
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-# CONFIG_BRCMUTIL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRAMFS=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_KEXEC=y
-# CONFIG_LANTIQ is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM963XX=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RELAY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-# CONFIG_SPI_BCM63XX is not set
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch b/target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch
deleted file mode 100644
index 0f250ca..0000000
--- a/target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch
+++ /dev/null
@@ -1,122 +0,0 @@
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v
- 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- 	u32 val;
- 
--	if (BCMCPU_IS_6345())
--		return (8 * 1024 * 1024);
-+	if (BCMCPU_IS_6345()) {
-+		val = bcm_sdram_readl(SDRAM_MBASE_REG);
-+		return (val * 8 * 1024 * 1024);
-+	}
- 
- 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
- 		val = bcm_sdram_readl(SDRAM_CFG_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -734,6 +734,8 @@
- #define SDRAM_CFG_BANK_SHIFT		13
- #define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
- 
-+#define SDRAM_MBASE_REG			0xc
-+
- #define SDRAM_PRIO_REG			0x2C
- #define SDRAM_PRIO_MIPS_SHIFT		29
- #define SDRAM_PRIO_MIPS_MASK		(1 << SDRAM_PRIO_MIPS_SHIFT)
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -709,15 +709,9 @@ void __init board_prom_init(void)
- 	char cfe_version[32];
- 	u32 val;
- 
--	/* read base address of boot chip select (0)
--	 * 6345 does not have MPI but boots from standard
--	 * MIPS Flash address */
--	if (BCMCPU_IS_6345())
--		val = 0x1fc00000;
--	else {
--		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--		val &= MPI_CSBASE_BASE_MASK;
--	}
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
- 	boot_addr = (u8 *)KSEG1ADDR(val);
- 
- 	/* dump cfe version */
-@@ -893,12 +887,9 @@ int __init board_register_devices(void)
- 		bcm63xx_dsp_register(&board.dsp);
- 
- 	/* read base address of boot chip select (0) */
--	if (BCMCPU_IS_6345())
--		val = 0x1fc00000;
--	else {
--		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--		val &= MPI_CSBASE_BASE_MASK;
--	}
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+
- 	mtd_resources[0].start = val;
- 	mtd_resources[0].end = 0x1FFFFFFF;
- 
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -163,7 +163,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_ENET0_BASE		(0xfffe1800)
- #define BCM_6345_ENETDMA_BASE		(0xfffe2800)
- #define BCM_6345_PCMCIA_BASE		(0xfffe2028)
--#define BCM_6345_MPI_BASE		(0xdeadbeef)
-+#define BCM_6345_MPI_BASE		(0xfffe2000)
- #define BCM_6345_OHCI0_BASE		(0xfffe2100)
- #define BCM_6345_OHCI_PRIV_BASE		(0xfffe2200)
- #define BCM_6345_USBH_PRIV_BASE		(0xdeadbeef)
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -4,7 +4,7 @@
-  * for more details.
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
-@@ -33,7 +33,10 @@ static void bcm63xx_gpio_set(struct gpio
- 		BUG();
- 
- 	if (gpio < 32) {
--		reg = GPIO_DATA_LO_REG;
-+		if (!BCMCPU_IS_6345())
-+			reg = GPIO_DATA_LO_REG;
-+		else
-+			reg = GPIO_DATA_HI_REG;
- 		mask = 1 << gpio;
- 		v = &gpio_out_low;
- 	} else {
-@@ -60,7 +63,10 @@ static int bcm63xx_gpio_get(struct gpio_
- 		BUG();
- 
- 	if (gpio < 32) {
--		reg = GPIO_DATA_LO_REG;
-+		if (!BCMCPU_IS_6345())
-+			reg = GPIO_DATA_LO_REG;
-+		else
-+			reg = GPIO_DATA_HI_REG;
- 		mask = 1 << gpio;
- 	} else {
- 		reg = GPIO_DATA_HI_REG;
-@@ -125,7 +131,11 @@ static struct gpio_chip bcm63xx_gpio_chi
- 
- int __init bcm63xx_gpio_init(void)
- {
--	gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+	if (!BCMCPU_IS_6345())
-+		gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+	else
-+		gpio_out_low = bcm_gpio_readl(GPIO_DATA_HI_REG);
-+
- 	gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
- 	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
- 	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
diff --git a/target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch
deleted file mode 100644
index b30b3d1..0000000
--- a/target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-The bcm63xx SOC has an integrated OHCI controller, this patch adds
-platform device registration and change board code to register ohci
-device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig                          |    6 ++
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 5 files changed, 67 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
- config BCM63XX_CPU_6348
- 	bool "support 6348 CPU"
- 	select HW_HAS_PCI
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC
-+	select USB_OHCI_BIG_ENDIAN_MMIO
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
- 	select HW_HAS_PCI
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC
-+	select USB_OHCI_BIG_ENDIAN_MMIO
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,5 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
--		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
-+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-+		   dev-usb-ohci.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -883,6 +884,9 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
- 
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+	{
-+		/* start & end filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		/* start filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ohci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+	.name		= "bcm63xx_ohci",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(ohci_resources),
-+	.resource	= ohci_resources,
-+	.dev		= {
-+		.dma_mask		= &ohci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
-+		return 0;
-+
-+	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+	ohci_resources[0].end = ohci_resources[0].start;
-+	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+	ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+	return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch
deleted file mode 100644
index e7f1f47..0000000
--- a/target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-The bcm63xx SOC has an integrated EHCI controller, this patch adds
-platform device registration and change board code to register
-EHCI device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig                          |    2 +
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 5 files changed, 62 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_EHCI
-+	select USB_EHCI_BIG_ENDIAN_MMIO
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- 		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--		   dev-usb-ohci.o
-+		   dev-usb-ohci.o dev-usb-ehci.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -884,6 +885,9 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
- 	if (board.has_ohci0)
- 		bcm63xx_ohci_register();
- 
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+	{
-+		/* start & end filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		/* start filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ehci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+	.name		= "bcm63xx_ehci",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(ehci_resources),
-+	.resource	= ehci_resources,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+	if (!BCMCPU_IS_6358())
-+		return 0;
-+
-+	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+	ehci_resources[0].end = ehci_resources[0].start;
-+	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+	ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+	return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch
deleted file mode 100644
index 2666e60..0000000
--- a/target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ohci-bcm63xx.c |  166 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c     |    5 +
- drivers/usb/host/ohci.h         |    2 +-
- 3 files changed, 172 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -0,0 +1,166 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+	int ret;
-+
-+        /*
-+         * port 2 can be shared with USB slave, but all boards seem to
-+         * have only one host port populated, so we can hardcode it
-+         */
-+	ohci->num_ports = 1;
-+
-+	ret = ohci_init(ohci);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = ohci_run(ohci);
-+	if (ret < 0) {
-+		err("can't start %s", hcd->self.bus_name);
-+		ohci_stop(hcd);
-+		return ret;
-+	}
-+	return 0;
-+}
-+
-+static const struct hc_driver ohci_bcm63xx_hc_driver = {
-+	.description =		hcd_name,
-+	.product_desc =		"BCM63XX integrated OHCI controller",
-+	.hcd_priv_size =	sizeof(struct ohci_hcd),
-+
-+	.irq =			ohci_irq,
-+	.flags =		HCD_USB11 | HCD_MEMORY,
-+	.start =		ohci_bcm63xx_start,
-+	.stop =			ohci_stop,
-+	.shutdown =		ohci_shutdown,
-+	.urb_enqueue =		ohci_urb_enqueue,
-+	.urb_dequeue =		ohci_urb_dequeue,
-+	.endpoint_disable =	ohci_endpoint_disable,
-+	.get_frame_number =	ohci_get_frame,
-+	.hub_status_data =	ohci_hub_status_data,
-+	.hub_control =		ohci_hub_control,
-+	.start_port_reset =	ohci_start_port_reset,
-+};
-+
-+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+	struct resource *res_mem;
-+	struct usb_hcd *hcd;
-+	struct ohci_hcd *ohci;
-+	u32 reg;
-+	int ret, irq;
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	irq = platform_get_irq(pdev, 0);
-+	if (!res_mem || irq < 0)
-+		return -ENODEV;
-+
-+	if (BCMCPU_IS_6348()) {
-+		struct clk *clk;
-+		/* enable USB host clock */
-+		clk = clk_get(&pdev->dev, "usbh");
-+		if (IS_ERR(clk))
-+			return -ENODEV;
-+
-+		clk_enable(clk);
-+		usb_host_clock = clk;
-+		bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+
-+	} else if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+	} else
-+		return 0;
-+
-+	hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+	if (!hcd)
-+		return -ENOMEM;
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+		pr_debug("request_mem_region failed\n");
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+
-+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs) {
-+		pr_debug("ioremap failed\n");
-+		ret = -EIO;
-+		goto out1;
-+	}
-+
-+	ohci = hcd_to_ohci(hcd);
-+	ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
-+		OHCI_QUIRK_FRAME_NO;
-+	ohci_hcd_init(ohci);
-+
-+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+	if (ret)
-+		goto out2;
-+
-+	platform_set_drvdata(pdev, hcd);
-+	return 0;
-+
-+out2:
-+	iounmap(hcd->regs);
-+out1:
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+	usb_put_hcd(hcd);
-+	return ret;
-+}
-+
-+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(pdev);
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	usb_put_hcd(hcd);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	if (usb_host_clock) {
-+		clk_disable(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver ohci_hcd_bcm63xx_driver = {
-+	.probe		= ohci_hcd_bcm63xx_drv_probe,
-+	.remove		= __devexit_p(ohci_hcd_bcm63xx_drv_remove),
-+	.shutdown	= usb_hcd_platform_shutdown,
-+	.driver		= {
-+		.name	= "bcm63xx_ohci",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ohci");
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1055,6 +1055,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ohci_hcd_da8xx_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_bcm63xx_driver
-+#endif
-+
- #ifdef CONFIG_USB_OHCI_SH
- #include "ohci-sh.c"
- #define PLATFORM_DRIVER		ohci_hcd_sh_driver
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -645,7 +645,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
- 
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)	0
diff --git a/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch
deleted file mode 100644
index 4bdf563..0000000
--- a/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ehci-bcm63xx.c |  154 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c     |    5 +
- 2 files changed, 159 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int retval;
-+
-+	retval = ehci_halt(ehci);
-+	if (retval)
-+		return retval;
-+
-+	retval = ehci_init(hcd);
-+	if (retval)
-+		return retval;
-+
-+	ehci_reset(ehci);
-+	ehci_port_power(ehci, 0);
-+
-+	return retval;
-+}
-+
-+
-+static const struct hc_driver ehci_bcm63xx_hc_driver = {
-+	.description =		hcd_name,
-+	.product_desc =		"BCM63XX integrated EHCI controller",
-+	.hcd_priv_size =	sizeof(struct ehci_hcd),
-+
-+	.irq =			ehci_irq,
-+	.flags =		HCD_MEMORY | HCD_USB2,
-+
-+	.reset =		ehci_bcm63xx_setup,
-+	.start =		ehci_run,
-+	.stop =			ehci_stop,
-+	.shutdown =		ehci_shutdown,
-+
-+	.urb_enqueue =		ehci_urb_enqueue,
-+	.urb_dequeue =		ehci_urb_dequeue,
-+	.endpoint_disable =	ehci_endpoint_disable,
-+
-+	.get_frame_number =	ehci_get_frame,
-+
-+	.hub_status_data =	ehci_hub_status_data,
-+	.hub_control =		ehci_hub_control,
-+	.bus_suspend =		ehci_bus_suspend,
-+	.bus_resume =		ehci_bus_resume,
-+	.relinquish_port =	ehci_relinquish_port,
-+	.port_handed_over =	ehci_port_handed_over,
-+};
-+
-+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+	struct resource *res_mem;
-+	struct usb_hcd *hcd;
-+	struct ehci_hcd *ehci;
-+	u32 reg;
-+	int ret, irq;
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	irq = platform_get_irq(pdev, 0);;
-+	if (!res_mem || irq < 0)
-+		return -ENODEV;
-+
-+	reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+	reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+	reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+	bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+
-+	/*
-+	 * The magic value comes for the original vendor BSP and is
-+	 * needed for USB to work. Datasheet does not help, so the
-+	 * magic value is used as-is.
-+	 */
-+	bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+
-+	hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+	if (!hcd)
-+		return -ENOMEM;
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+		pr_debug("request_mem_region failed\n");
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+
-+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs) {
-+		pr_debug("ioremap failed\n");
-+		ret = -EIO;
-+		goto out1;
-+	}
-+
-+	ehci = hcd_to_ehci(hcd);
-+	ehci->big_endian_mmio = 1;
-+	ehci->big_endian_desc = 0;
-+	ehci->caps = hcd->regs;
-+	ehci->regs = hcd->regs +
-+		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+	ehci->sbrn = 0x20;
-+	ehci->ignore_oc = 1;
-+
-+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+	if (ret)
-+		goto out2;
-+
-+	platform_set_drvdata(pdev, hcd);
-+	return 0;
-+
-+out2:
-+	iounmap(hcd->regs);
-+out1:
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+	usb_put_hcd(hcd);
-+	return ret;
-+}
-+
-+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(pdev);
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	usb_put_hcd(hcd);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver ehci_hcd_bcm63xx_driver = {
-+	.probe		= ehci_hcd_bcm63xx_drv_probe,
-+	.remove		= __devexit_p(ehci_hcd_bcm63xx_drv_remove),
-+	.shutdown	= usb_hcd_platform_shutdown,
-+	.driver		= {
-+		.name	= "bcm63xx_ehci",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ehci");
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1319,6 +1319,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ehci_grlib_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define PLATFORM_DRIVER		ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch
deleted file mode 100644
index c8d257f..0000000
--- a/target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -822,20 +822,6 @@ void __init board_setup(void)
- 		panic("unexpected CPU for bcm963xx board");
- }
- 
--static struct mtd_partition mtd_partitions[] = {
--	{
--		.name		= "cfe",
--		.offset		= 0x0,
--		.size		= 0x40000,
--	}
--};
--
--static struct physmap_flash_data flash_data = {
--	.width			= 2,
--	.nr_parts		= ARRAY_SIZE(mtd_partitions),
--	.parts			= mtd_partitions,
--};
--
- static struct resource mtd_resources[] = {
- 	{
- 		.start		= 0,	/* filled at runtime */
-@@ -845,12 +831,9 @@ static struct resource mtd_resources[] =
- };
- 
- static struct platform_device mtd_dev = {
--	.name			= "physmap-flash",
-+	.name			= "bcm963xx-flash",
- 	.resource		= mtd_resources,
- 	.num_resources		= ARRAY_SIZE(mtd_resources),
--	.dev			= {
--		.platform_data	= &flash_data,
--	},
- };
- 
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/drivers/mtd/maps/bcm963xx-flash.c
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -27,6 +27,8 @@
- #include <linux/vmalloc.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
-+#include <linux/magic.h>
-+#include <linux/jffs2.h>
- 
- #include <asm/mach-bcm63xx/bcm963xx_tag.h>
- 
-@@ -35,6 +37,14 @@
- 
- #define PFX KBUILD_MODNAME ": "
- 
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
-+
- static struct mtd_partition *parsed_parts;
- 
- static struct mtd_info *bcm963xx_mtd_info;
-@@ -219,9 +229,21 @@ probe_ok:
- 			}
- 		}
- 	} else {
--		dev_info(&pdev->dev, "unsupported bootloader\n");
--		err = -ENODEV;
--		goto err_probe;
-+		printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
-+		if (bcm963xx_mtd_info->size > 0x00400000) {
-+			printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
-+			bcm963xx_map.virt = (u32)(BCM63XX_EXTENDED_SIZE);
-+		}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+		if (parsed_nr_parts == 0) {
-+			int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
-+			if (ret > 0) {
-+				part_type = "RedBoot";
-+				parsed_nr_parts = ret;
-+			}
-+		}
-+#endif
- 	}
- 
- 	return mtd_device_register(bcm963xx_mtd_info, parsed_parts,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -57,7 +57,7 @@ static inline int redboot_checksum(struc
- 	return 1;
- }
- 
--static int parse_redboot_partitions(struct mtd_info *master,
-+int parse_redboot_partitions(struct mtd_info *master,
-                              struct mtd_partition **pparts,
-                              unsigned long fis_origin)
- {
-@@ -180,6 +180,14 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
-+	if (!fis_origin) {
-+		for (i = 0; i < numslots; i++) {
-+			if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+				fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+			}
-+		}
-+	}
-+
- 	for (i = 0; i < numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
-@@ -202,9 +210,8 @@ static int parse_redboot_partitions(stru
- 		new_fl->img = &buf[i];
-                 if (fis_origin) {
-                         buf[i].flash_base -= fis_origin;
--                } else {
--                        buf[i].flash_base &= master->size-1;
-                 }
-+		buf[i].flash_base &= (master->size << 1) - 1;
- 
- 		/* I'm sure the JFFS2 code has done me permanent damage.
- 		 * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch
deleted file mode 100644
index 67c0d71..0000000
--- a/target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-@@ -86,8 +86,10 @@ struct bcm_tag {
- 	char rootfs_crc[CRC_LEN];
- 	/* 224-227: CRC32 of kernel partition */
- 	char kernel_crc[CRC_LEN];
--	/* 228-235: Unused at present */
--	char reserved1[8];
-+	/* 228-231: Image sequence number */
-+	char image_sequence[4];
-+	/* 222-235: Openwrt: real rootfs length */
-+	char real_rootfs_length[4];
- 	/* 236-239: CRC32 of header excluding last 20 bytes */
- 	char header_crc[CRC_LEN];
- 	/* 240-255: Unused at present */
---- a/drivers/mtd/maps/bcm963xx-flash.c
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -64,7 +64,7 @@ static int parse_cfe_partitions(struct m
- 	int ret;
- 	size_t retlen;
- 	unsigned int rootfsaddr, kerneladdr, spareaddr;
--	unsigned int rootfslen, kernellen, sparelen, totallen;
-+	unsigned int rootfslen, kernellen, sparelen;
- 	int namelen = 0;
- 	int i;
- 	char *boardid;
-@@ -85,7 +85,7 @@ static int parse_cfe_partitions(struct m
- 
- 	sscanf(buf->kernel_address, "%u", &kerneladdr);
- 	sscanf(buf->kernel_length, "%u", &kernellen);
--	sscanf(buf->total_length, "%u", &totallen);
-+	rootfslen = *(uint32_t *)(&(buf->real_rootfs_length));
- 	tagversion = &(buf->tag_version[0]);
- 	boardid = &(buf->board_id[0]);
- 
-@@ -94,7 +94,8 @@ static int parse_cfe_partitions(struct m
- 
- 	kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- 	rootfsaddr = kerneladdr + kernellen;
--	spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
-+	rootfslen = roundup(rootfslen, master->erasesize);
-+	spareaddr = rootfsaddr + rootfslen;
- 	sparelen = master->size - spareaddr - master->erasesize;
- 	rootfslen = spareaddr - rootfsaddr;
- 
diff --git a/target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644
index 95c5cff..0000000
--- a/target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -1517,7 +1517,7 @@ static int compute_hw_mtu(struct bcm_ene
- 	actual_mtu = mtu;
- 
- 	/* add ethernet header + vlan tag size */
--	actual_mtu += VLAN_ETH_HLEN;
-+	actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
- 
- 	if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- 		return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch b/target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch
deleted file mode 100644
index 630662f..0000000
--- a/target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch
+++ /dev/null
@@ -1,530 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -29,16 +29,15 @@
- 					CKCTL_6338_SAR_EN |		\
- 					CKCTL_6338_SPI_EN)
- 
--#define CKCTL_6345_CPU_EN		(1 << 0)
--#define CKCTL_6345_BUS_EN		(1 << 1)
--#define CKCTL_6345_EBI_EN		(1 << 2)
--#define CKCTL_6345_UART_EN		(1 << 3)
--#define CKCTL_6345_ADSLPHY_EN		(1 << 4)
--#define CKCTL_6345_ENET_EN		(1 << 7)
--#define CKCTL_6345_USBH_EN		(1 << 8)
-+#define CKCTL_6345_CPU_EN		(1 << 16)
-+#define CKCTL_6345_BUS_EN		(1 << 17)
-+#define CKCTL_6345_EBI_EN		(1 << 18)
-+#define CKCTL_6345_UART_EN		(1 << 19)
-+#define CKCTL_6345_ADSLPHY_EN		(1 << 20)
-+#define CKCTL_6345_ENET_EN		(1 << 23)
-+#define CKCTL_6345_USBH_EN		(1 << 24)
- 
--#define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_ENET_EN |	\
--					CKCTL_6345_USBH_EN |	\
-+#define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_USBH_EN |	\
- 					CKCTL_6345_ADSLPHY_EN)
- 
- #define CKCTL_6348_ADSLPHY_EN		(1 << 0)
-@@ -547,6 +546,39 @@
- #define ENETDMA_SRAM4_REG(x)		(0x20c + (x) * 0x10)
- 
- 
-+/* Broadcom 6345 ENET DMA definitions */
-+#define ENETDMA_6345_CHANCFG_REG(x)	(0x00 + (x) * 0x40)
-+#define ENETDMA_6345_CHANCFG_EN_SHIFT	0
-+#define ENETDMA_6345_CHANCFG_EN_MASK	(1 << ENETDMA_6345_CHANCFG_EN_SHIFT)
-+#define ENETDMA_6345_PKTHALT_SHIFT	1
-+#define ENETDMA_6345_PKTHALT_MASK	(1 << ENETDMA_6345_PKTHALT_SHIFT)
-+#define ENETDMA_6345_CHAINING_SHIFT	2
-+#define ENETDMA_6345_CHAINING_MASK	(1 << ENETDMA_6345_CHAINING_SHIFT)
-+#define ENETDMA_6345_WRAP_EN_SHIFT	3
-+#define ENETDMA_6345_WRAP_EN_MASK	(1 << ENETDMA_6345_WRAP_EN_SHIFT)
-+#define ENETDMA_6345_FLOWC_EN_SHIFT	4
-+#define ENETDMA_6345_FLOWC_EN_MASK	(1 << ENETDMA_6345_FLOWC_EN_SHIFT)
-+
-+#define ENETDMA_6345_MAXBURST_REG(x)	(0x04 + (x) * 0x40)
-+
-+#define ENETDMA_6345_RSTART_REG(x)	(0x08 + (x) * 0x40)
-+
-+#define ENETDMA_6345_LEN_REG(x)		(0x0C + (x) * 0x40)
-+
-+#define ENETDMA_6345_BSTAT_REG(x)	(0x10 + (x) * 0x40)
-+
-+#define ENETDMA_6345_IR_REG(x)		(0x14 + (x) * 0x40)
-+#define ENETDMA_6345_IR_BUFDONE_MASK	(1 << 0)
-+#define ENETDMA_6345_IR_PKTDONE_MASK	(1 << 1)
-+#define ENETDMA_6345_IR_NOTOWNER_MASK	(1 << 2)
-+
-+#define ENETDMA_6345_IRMASK_REG(x)	(0x18 + (x) * 0x40)
-+
-+#define ENETDMA_6345_FC_REG(x)		(0x1C + (x) * 0x40)
-+
-+#define ENETDMA_6345_BUFALLOC_REG(x)	(0x20 + (x) * 0x40)
-+
-+
- /*************************************************************************
-  * _REG relative to RSET_OHCI_PRIV
-  *************************************************************************/
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -32,6 +32,7 @@
- #include <linux/if_vlan.h>
- 
- #include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_cpu.h>
- #include "bcm63xx_enet.h"
- 
- static char bcm_enet_driver_name[] = "bcm63xx_enet";
-@@ -178,6 +179,7 @@ static void bcm_enet_mdio_write_mii(stru
- static int bcm_enet_refill_rx(struct net_device *dev)
- {
- 	struct bcm_enet_priv *priv;
-+	unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
- 
- 	priv = netdev_priv(dev);
- 
-@@ -206,7 +208,7 @@ static int bcm_enet_refill_rx(struct net
- 		len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
- 		len_stat |= DMADESC_OWNER_MASK;
- 		if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
--			len_stat |= DMADESC_WRAP_MASK;
-+			len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
- 			priv->rx_dirty_desc = 0;
- 		} else {
- 			priv->rx_dirty_desc++;
-@@ -217,7 +219,10 @@ static int bcm_enet_refill_rx(struct net
- 		priv->rx_desc_count++;
- 
- 		/* tell dma engine we allocated one buffer */
--		enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+		if (!BCMCPU_IS_6345())
-+			enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+		else
-+			enet_dma_writel(priv, 1, ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
- 	}
- 
- 	/* If rx ring is still empty, set a timer to try allocating
-@@ -255,6 +260,7 @@ static int bcm_enet_receive_queue(struct
- 	struct bcm_enet_priv *priv;
- 	struct device *kdev;
- 	int processed;
-+	unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
- 
- 	priv = netdev_priv(dev);
- 	kdev = &priv->pdev->dev;
-@@ -293,7 +299,7 @@ static int bcm_enet_receive_queue(struct
- 
- 		/* if the packet does not have start of packet _and_
- 		 * end of packet flag set, then just recycle it */
--		if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
-+		if ((len_stat & (DMADESC_ESOP_MASK >> desc_shift)) != (DMADESC_ESOP_MASK >> desc_shift)) {
- 			dev->stats.rx_dropped++;
- 			continue;
- 		}
-@@ -353,8 +359,15 @@ static int bcm_enet_receive_queue(struct
- 		bcm_enet_refill_rx(dev);
- 
- 		/* kick rx dma */
--		enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--				ENETDMA_CHANCFG_REG(priv->rx_chan));
-+		if (!BCMCPU_IS_6345())
-+			enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+					ENETDMA_CHANCFG_REG(priv->rx_chan));
-+		else
-+			enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+					      ENETDMA_6345_CHAINING_MASK |
-+					      ENETDMA_6345_WRAP_EN_MASK |
-+					      ENETDMA_6345_FLOWC_EN_MASK,
-+					ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
- 	}
- 
- 	return processed;
-@@ -429,10 +442,21 @@ static int bcm_enet_poll(struct napi_str
- 	dev = priv->net_dev;
- 
- 	/* ack interrupts */
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IR_REG(priv->rx_chan));
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IR_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IR_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IR_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IR_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IR_REG(priv->tx_chan));
-+	}
- 
- 	/* reclaim sent skb */
- 	tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -451,10 +475,21 @@ static int bcm_enet_poll(struct napi_str
- 	napi_complete(napi);
- 
- 	/* restore rx/tx interrupt */
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IRMASK_REG(priv->rx_chan));
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IRMASK_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IRMASK_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+	}
- 
- 	return rx_work_done;
- }
-@@ -497,8 +532,13 @@ static irqreturn_t bcm_enet_isr_dma(int
- 	priv = netdev_priv(dev);
- 
- 	/* mask rx/tx interrupts */
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+	}
- 
- 	napi_schedule(&priv->napi);
- 
-@@ -514,6 +554,7 @@ static int bcm_enet_start_xmit(struct sk
- 	struct bcm_enet_desc *desc;
- 	u32 len_stat;
- 	int ret;
-+	unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
- 
- 	priv = netdev_priv(dev);
- 
-@@ -539,14 +580,13 @@ static int bcm_enet_start_xmit(struct sk
- 				       DMA_TO_DEVICE);
- 
- 	len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
--	len_stat |= DMADESC_ESOP_MASK |
--		DMADESC_APPEND_CRC |
--		DMADESC_OWNER_MASK;
-+	len_stat |= ((DMADESC_ESOP_MASK >> desc_shift) |
-+		    DMADESC_APPEND_CRC | DMADESC_OWNER_MASK);
- 
- 	priv->tx_curr_desc++;
- 	if (priv->tx_curr_desc == priv->tx_ring_size) {
- 		priv->tx_curr_desc = 0;
--		len_stat |= DMADESC_WRAP_MASK;
-+		len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
- 	}
- 	priv->tx_desc_count--;
- 
-@@ -557,8 +597,15 @@ static int bcm_enet_start_xmit(struct sk
- 	wmb();
- 
- 	/* kick tx dma */
--	enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--			ENETDMA_CHANCFG_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345())
-+		enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+				ENETDMA_CHANCFG_REG(priv->tx_chan));
-+	else
-+		enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+					ENETDMA_6345_CHAINING_MASK |
-+					ENETDMA_6345_WRAP_EN_MASK |
-+					ENETDMA_6345_FLOWC_EN_MASK,
-+				ENETDMA_6345_CHANCFG_REG(priv->tx_chan));
- 
- 	/* stop queue if no more desc available */
- 	if (!priv->tx_desc_count)
-@@ -686,6 +733,9 @@ static void bcm_enet_set_flow(struct bcm
- 		val &= ~ENET_RXCFG_ENFLOW_MASK;
- 	enet_writel(priv, val, ENET_RXCFG_REG);
- 
-+	if (BCMCPU_IS_6345())
-+		return;
-+
- 	/* tx flow control (pause frame generation) */
- 	val = enet_dma_readl(priv, ENETDMA_CFG_REG);
- 	if (tx_en)
-@@ -833,8 +883,13 @@ static int bcm_enet_open(struct net_devi
- 
- 	/* mask all interrupts and request them */
- 	enet_writel(priv, 0, ENET_IRMASK_REG);
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+	}
- 
- 	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- 	if (ret)
-@@ -913,8 +968,12 @@ static int bcm_enet_open(struct net_devi
- 	priv->rx_curr_desc = 0;
- 
- 	/* initialize flow control buffer allocation */
--	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
--			ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+	if (!BCMCPU_IS_6345())
-+		enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+				ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+	else
-+		enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+				ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
- 
- 	if (bcm_enet_refill_rx(dev)) {
- 		dev_err(kdev, "cannot allocate rx skb queue\n");
-@@ -923,37 +982,62 @@ static int bcm_enet_open(struct net_devi
- 	}
- 
- 	/* write rx & tx ring addresses */
--	enet_dma_writel(priv, priv->rx_desc_dma,
--			ENETDMA_RSTART_REG(priv->rx_chan));
--	enet_dma_writel(priv, priv->tx_desc_dma,
--			ENETDMA_RSTART_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, priv->rx_desc_dma,
-+				ENETDMA_RSTART_REG(priv->rx_chan));
-+		enet_dma_writel(priv, priv->tx_desc_dma,
-+				ENETDMA_RSTART_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, priv->rx_desc_dma,
-+				ENETDMA_6345_RSTART_REG(priv->rx_chan));
-+		enet_dma_writel(priv, priv->tx_desc_dma,
-+				ENETDMA_6345_RSTART_REG(priv->tx_chan));
-+	}
- 
- 	/* clear remaining state ram for rx & tx channel */
--	enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->tx_chan));
-+	}
- 
- 	/* set max rx/tx length */
- 	enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
- 	enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
- 
- 	/* set dma maximum burst len */
--	enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
--			ENETDMA_MAXBURST_REG(priv->rx_chan));
--	enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
--			ENETDMA_MAXBURST_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+				ENETDMA_MAXBURST_REG(priv->rx_chan));
-+		enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+				ENETDMA_MAXBURST_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+				ENETDMA_6345_MAXBURST_REG(priv->rx_chan));
-+		enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+				ENETDMA_6345_MAXBURST_REG(priv->tx_chan));
-+	}
- 
- 	/* set correct transmit fifo watermark */
- 	enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
- 
- 	/* set flow control low/high threshold to 1/3 / 2/3 */
--	val = priv->rx_ring_size / 3;
--	enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
--	val = (priv->rx_ring_size * 2) / 3;
--	enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		val = priv->rx_ring_size / 3;
-+		enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+		val = (priv->rx_ring_size * 2) / 3;
-+		enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+	} else {
-+		enet_dma_writel(priv, 5, ENETDMA_6345_FC_REG(priv->rx_chan));
-+		enet_dma_writel(priv, priv->rx_ring_size, ENETDMA_6345_LEN_REG(priv->rx_chan));
-+		enet_dma_writel(priv, priv->tx_ring_size, ENETDMA_6345_LEN_REG(priv->tx_chan));
-+	}
- 
- 	/* all set, enable mac and interrupts, start dma engine and
- 	 * kick rx dma channel */
-@@ -961,27 +1045,58 @@ static int bcm_enet_open(struct net_devi
- 	val = enet_readl(priv, ENET_CTL_REG);
- 	val |= ENET_CTL_ENABLE_MASK;
- 	enet_writel(priv, val, ENET_CTL_REG);
--	enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
--	enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--			ENETDMA_CHANCFG_REG(priv->rx_chan));
-+
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+		enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+				ENETDMA_CHANCFG_REG(priv->rx_chan));
-+	} else {
-+		enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+					ENETDMA_6345_CHAINING_MASK |
-+					ENETDMA_6345_WRAP_EN_MASK |
-+					ENETDMA_6345_FLOWC_EN_MASK,
-+				ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
-+	}
- 
- 	/* watch "mib counters about to overflow" interrupt */
- 	enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
- 	enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
- 
- 	/* watch "packet transferred" interrupt in rx and tx */
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IR_REG(priv->rx_chan));
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IR_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IR_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IR_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IR_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IR_REG(priv->tx_chan));
-+	}
- 
- 	/* make sure we enable napi before rx interrupt  */
- 	napi_enable(&priv->napi);
- 
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IRMASK_REG(priv->rx_chan));
--	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--			ENETDMA_IRMASK_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+				ENETDMA_IRMASK_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+					ENETDMA_IR_PKTDONE_MASK |
-+					ENETDMA_IR_NOTOWNER_MASK,
-+				ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+	}
- 
- 	if (priv->has_phy)
- 		phy_start(priv->phydev);
-@@ -1061,13 +1176,19 @@ static void bcm_enet_disable_dma(struct
- {
- 	int limit;
- 
--	enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+	if (!BCMCPU_IS_6345())
-+		enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+	else
-+		enet_dma_writel(priv, 0, ENETDMA_6345_CHANCFG_REG(chan));
- 
- 	limit = 1000;
- 	do {
- 		u32 val;
- 
--		val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
-+		if (!BCMCPU_IS_6345())
-+			val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
-+		else
-+			val = enet_dma_readl(priv, ENETDMA_6345_CHANCFG_REG(chan));
- 		if (!(val & ENETDMA_CHANCFG_EN_MASK))
- 			break;
- 		udelay(1);
-@@ -1094,8 +1215,13 @@ static int bcm_enet_stop(struct net_devi
- 
- 	/* mask all interrupts */
- 	enet_writel(priv, 0, ENET_IRMASK_REG);
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	if (!BCMCPU_IS_6345()) {
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+	} else {
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+		enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+	}
- 
- 	/* make sure no mib update is scheduled */
- 	cancel_work_sync(&priv->mib_update_task);
-@@ -1624,6 +1750,7 @@ static int __devinit bcm_enet_probe(stru
- 	const char *clk_name;
- 	unsigned int iomem_size;
- 	int i, ret;
-+	unsigned int chan_offset = 0;
- 
- 	/* stop if shared driver failed, assume driver->probe will be
- 	 * called in the same order we register devices (correct ?) */
-@@ -1663,10 +1790,13 @@ static int __devinit bcm_enet_probe(stru
- 	priv->irq_tx = res_irq_tx->start;
- 	priv->mac_id = pdev->id;
- 
-+	if (BCMCPU_IS_6345())
-+		chan_offset = 1;
-+
- 	/* get rx & tx dma channel id for this mac */
- 	if (priv->mac_id == 0) {
--		priv->rx_chan = 0;
--		priv->tx_chan = 1;
-+		priv->rx_chan = 0 + chan_offset;
-+		priv->tx_chan = 1 + chan_offset;
- 		clk_name = "enet0";
- 	} else {
- 		priv->rx_chan = 2;
---- a/drivers/net/bcm63xx_enet.h
-+++ b/drivers/net/bcm63xx_enet.h
-@@ -46,6 +46,9 @@ struct bcm_enet_desc {
- #define DMADESC_ESOP_MASK	(DMADESC_EOP_MASK | DMADESC_SOP_MASK)
- #define DMADESC_WRAP_MASK	(1 << 12)
- 
-+/* Shift down for EOP, SOP and WRAP bits */
-+#define DMADESC_6345_SHIFT	(3)
-+
- #define DMADESC_UNDER_MASK	(1 << 9)
- #define DMADESC_APPEND_CRC	(1 << 8)
- #define DMADESC_OVSIZE_MASK	(1 << 4)
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -104,7 +104,7 @@ int __init bcm63xx_enet_register(int uni
- 	if (unit > 1)
- 		return -ENODEV;
- 
--	if (unit == 1 && BCMCPU_IS_6338())
-+	if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345()))
- 		return -ENODEV;
- 
- 	if (!shared_device_registered) {
diff --git a/target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch b/target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch
deleted file mode 100644
index ac61812..0000000
--- a/target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -296,6 +298,16 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_96348gw = {
-@@ -354,6 +366,16 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_FAST2404 = {
-@@ -844,12 +866,23 @@ static struct platform_device bcm63xx_gp
- 	.dev.platform_data	= &bcm63xx_led_data,
- };
- 
-+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
-+	.poll_interval  = 20,
-+};
-+
-+static struct platform_device bcm63xx_gpio_buttons_device = {
-+	.name		= "gpio-buttons",
-+	.id		= 0,
-+	.dev.platform_data = &bcm63xx_gpio_buttons_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
- 	u32 val;
-+	int button_count = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -891,5 +924,16 @@ int __init board_register_devices(void)
- 
- 	platform_device_register(&bcm63xx_gpio_leds);
- 
-+	/* count number of BUTTONs defined by this device */
-+	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+		button_count++;
-+
-+	if (button_count) {
-+		bcm63xx_gpio_buttons_data.nbuttons = button_count;
-+		bcm63xx_gpio_buttons_data.buttons = board.buttons;
-+
-+		platform_device_register(&bcm63xx_gpio_buttons_device);
-+	}
-+
- 	return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,9 @@ struct board_info {
- 
- 	/* GPIO LEDs */
- 	struct gpio_led leds[5];
-+
-+	/* Buttons */
-+	struct gpio_button buttons[4];
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/141-led_count.patch b/target/linux/brcm63xx/patches-3.1/141-led_count.patch
deleted file mode 100644
index 0e61d4d..0000000
--- a/target/linux/brcm63xx/patches-3.1/141-led_count.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -883,6 +883,7 @@ int __init board_register_devices(void)
- {
- 	u32 val;
- 	int button_count = 0;
-+	int led_count = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -919,7 +920,11 @@ int __init board_register_devices(void)
- 
- 	platform_device_register(&mtd_dev);
- 
--	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+	/* count number of LEDs defined by this device */
-+	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+		led_count++;
-+
-+	bcm63xx_led_data.num_leds = led_count;
- 	bcm63xx_led_data.leds = board.leds;
- 
- 	platform_device_register(&bcm63xx_gpio_leds);
diff --git a/target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch
deleted file mode 100644
index 2787742..0000000
--- a/target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch
+++ /dev/null
@@ -1,243 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -29,6 +29,7 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_udc.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -400,6 +401,8 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- 	.has_pccard			= 1,
- 	.has_ehci0			= 1,
-+
-+	.has_udc0			= 1,
- };
- 
- static struct board_info __initdata board_rta1025w_16 = {
-@@ -911,6 +914,9 @@ int __init board_register_devices(void)
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
- 
-+	if (board.has_udc0)
-+		bcm63xx_udc_register();
-+
- 	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-udc.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2009	Henk Vergonet <Henk.Vergonet@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+
-+static struct resource udc_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 udc_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_udc_device = {
-+	.name		= "bcm63xx-udc",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(udc_resources),
-+	.resource	= udc_resources,
-+	.dev		= {
-+		.dma_mask		= &udc_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_udc_register(void)
-+{
-+	if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
-+		return 0;
-+
-+	udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
-+	udc_resources[0].end = udc_resources[0].start;
-+	udc_resources[0].end += RSET_UDC_SIZE - 1;
-+	udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
-+	return platform_device_register(&bcm63xx_udc_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE		(0xdeadbeef)
- #define BCM_6338_GPIO_BASE		(0xfffe0400)
- #define BCM_6338_SPI_BASE		(0xfffe0c00)
--#define BCM_6338_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6338_UDC0_BASE		(0xfffe3000)
- #define BCM_6338_USBDMA_BASE		(0xfffe2400)
- #define BCM_6338_OHCI0_BASE		(0xdeadbeef)
- #define BCM_6338_OHCI_PRIV_BASE		(0xfffe3000)
-@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE		(0xdeadbeef)
- #define BCM_6345_GPIO_BASE		(0xfffe0400)
- #define BCM_6345_SPI_BASE		(0xdeadbeef)
--#define BCM_6345_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6345_UDC0_BASE		(0xfffe2100)
- #define BCM_6345_USBDMA_BASE		(0xfffe2800)
- #define BCM_6345_ENET0_BASE		(0xfffe1800)
- #define BCM_6345_ENETDMA_BASE		(0xfffe2800)
-@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE		(0xfffe0120)
- #define BCM_6358_GPIO_BASE		(0xfffe0080)
- #define BCM_6358_SPI_BASE		(0xdeadbeef)
--#define BCM_6358_UDC0_BASE		(0xfffe0800)
-+#define BCM_6358_UDC0_BASE		(0xfffe0400)
- #define BCM_6358_OHCI0_BASE		(0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
- #define BCM_6358_USBH_PRIV_BASE		(0xfffe1500)
-@@ -444,6 +444,7 @@ enum bcm63xx_irq {
- 	IRQ_UART0,
- 	IRQ_UART1,
- 	IRQ_DSL,
-+	IRQ_UDC0,
- 	IRQ_ENET0,
- 	IRQ_ENET1,
- 	IRQ_ENET_PHY,
-@@ -486,7 +487,7 @@ enum bcm63xx_irq {
- #define BCM_6345_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6345_DSL_IRQ		(IRQ_INTERNAL_BASE + 3)
- #define BCM_6345_ATM_IRQ		(IRQ_INTERNAL_BASE + 4)
--#define BCM_6345_USB_IRQ		(IRQ_INTERNAL_BASE + 5)
-+#define BCM_6345_UDC0_IRQ		(IRQ_INTERNAL_BASE + 5)
- #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
- #define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
-@@ -508,10 +509,17 @@ enum bcm63xx_irq {
- #define BCM_6348_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
- #define BCM_6348_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
-+#define BCM_6348_UDC0_IRQ		(IRQ_INTERNAL_BASE + 6)
- #define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
- #define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6348_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 14)
-+#define BCM_6348_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 15)
-+#define BCM_6348_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 16)
-+#define BCM_6348_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 17)
-+#define BCM_6348_USB_ISO_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 18)
-+#define BCM_6348_USB_ISO_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 19)
- #define BCM_6348_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 20)
- #define BCM_6348_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 21)
- #define BCM_6348_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 22)
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_UDC_H_
-+#define BCM63XX_DEV_USB_UDC_H_
-+
-+int bcm63xx_udc_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_UDC_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -47,6 +47,7 @@ struct board_info {
- 	unsigned int	has_dsp:1;
- 	unsigned int	has_uart0:1;
- 	unsigned int	has_uart1:1;
-+	unsigned int	has_udc0:1;
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- 		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--		   dev-usb-ohci.o dev-usb-ehci.o
-+		   dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
- };
- 
- /*
-+ * USB slave clock
-+ */
-+static void usbs_set(struct clk *clk, int enable)
-+{
-+	u32 mask;
-+
-+	switch(bcm63xx_get_cpu_id()) {
-+	case BCM6338_CPU_ID:
-+		mask = CKCTL_6338_USBS_EN;
-+		break;
-+	case BCM6348_CPU_ID:
-+		mask = CKCTL_6348_USBS_EN;
-+		break;
-+	default:
-+		return;
-+	}
-+	bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_usbs = {
-+	.set    = usbs_set,
-+};
-+
-+/*
-  * SPI clock
-  */
- static void spi_set(struct clk *clk, int enable)
-@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
- 		return &clk_ephy;
- 	if (!strcmp(id, "usbh"))
- 		return &clk_usbh;
-+	if (!strcmp(id, "usbs"))
-+		return &clk_usbs;
- 	if (!strcmp(id, "spi"))
- 		return &clk_spi;
- 	if (!strcmp(id, "periph"))
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_UDC
- 
- config BCM63XX_CPU_6345
- 	bool "support 6345 CPU"
-@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_UDC
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
diff --git a/target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch
deleted file mode 100644
index 363c6b1..0000000
--- a/target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -917,6 +917,9 @@ int __init board_register_devices(void)
- 	if (board.has_udc0)
- 		bcm63xx_udc_register();
- 
-+	if (board.num_devs)
-+		platform_add_devices(board.devs, board.num_devs);
-+
- 	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
- 
- 	/* Buttons */
- 	struct gpio_button buttons[4];
-+
-+	/* Additional platform devices */
-+	struct platform_device **devs;
-+	unsigned int	num_devs;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch b/target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch
deleted file mode 100644
index b82032f..0000000
--- a/target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -920,6 +920,9 @@ int __init board_register_devices(void)
- 	if (board.num_devs)
- 		platform_add_devices(board.devs, board.num_devs);
- 
-+	if (board.num_spis)
-+		spi_register_board_info(board.spis, board.num_spis);
-+
- 	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -65,6 +65,10 @@ struct board_info {
- 	/* Additional platform devices */
- 	struct platform_device **devs;
- 	unsigned int	num_devs;
-+
-+	/* Additional platform devices */
-+	struct spi_board_info *spis;
-+	unsigned int	num_spis;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/220-wl_exports.patch b/target/linux/brcm63xx/patches-3.1/220-wl_exports.patch
deleted file mode 100644
index fbf28ad..0000000
--- a/target/linux/brcm63xx/patches-3.1/220-wl_exports.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -39,6 +39,13 @@ static unsigned int mac_addr_used;
- static struct board_info board;
- 
- /*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
-+/*
-  * known 6338 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -752,6 +759,7 @@ void __init board_prom_init(void)
- 
- 	/* extract nvram data */
- 	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+	memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
- 
- 	/* check checksum before using data */
- 	if (nvram.version <= 4)
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
diff --git a/target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch
deleted file mode 100644
index 75a728f..0000000
--- a/target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -823,6 +823,8 @@ void __init board_prom_init(void)
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G3_EXT_MII |
- 				GPIO_MODE_6348_G0_EXT_MII;
-+		else if (BCMCPU_IS_6358())
-+			val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -400,6 +400,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
- #define GPIO_MODE_6358_UTOPIA		(1 << 12)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
- 
- 
- /*************************************************************************
diff --git a/target/linux/brcm63xx/patches-3.1/240-spi.patch b/target/linux/brcm63xx/patches-3.1/240-spi.patch
deleted file mode 100644
index 113d7b0..0000000
--- a/target/linux/brcm63xx/patches-3.1/240-spi.patch
+++ /dev/null
@@ -1,930 +0,0 @@
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -58,6 +58,7 @@ static const unsigned long bcm96338_regs
- 
- static const int bcm96338_irqs[] = {
- 	[IRQ_TIMER]		= BCM_6338_TIMER_IRQ,
-+	[IRQ_SPI]		= BCM_6338_SPI_IRQ,
- 	[IRQ_UART0]		= BCM_6338_UART0_IRQ,
- 	[IRQ_DSL]		= BCM_6338_DSL_IRQ,
- 	[IRQ_ENET0]		= BCM_6338_ENET0_IRQ,
-@@ -132,6 +133,7 @@ static const unsigned long bcm96348_regs
- 
- static const int bcm96348_irqs[] = {
- 	[IRQ_TIMER]		= BCM_6348_TIMER_IRQ,
-+	[IRQ_SPI]		= BCM_6348_SPI_IRQ,
- 	[IRQ_UART0]		= BCM_6348_UART0_IRQ,
- 	[IRQ_DSL]		= BCM_6348_DSL_IRQ,
- 	[IRQ_ENET0]		= BCM_6348_ENET0_IRQ,
-@@ -175,6 +177,7 @@ static const unsigned long bcm96358_regs
- 
- static const int bcm96358_irqs[] = {
- 	[IRQ_TIMER]		= BCM_6358_TIMER_IRQ,
-+	[IRQ_SPI]		= BCM_6358_SPI_IRQ,
- 	[IRQ_UART0]		= BCM_6358_UART0_IRQ,
- 	[IRQ_UART1]		= BCM_6358_UART1_IRQ,
- 	[IRQ_DSL]		= BCM_6358_DSL_IRQ,
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -0,0 +1,98 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_regs.h>
-+
-+#ifdef BCMCPU_RUNTIME_DETECT
-+/*
-+ * register offsets
-+ */
-+static const unsigned long bcm96338_regs_spi[] = {
-+	__GEN_SPI_REGS_TABLE(6338)
-+};
-+
-+static const unsigned long bcm96348_regs_spi[] = {
-+	__GEN_SPI_REGS_TABLE(6348)
-+};
-+
-+static const unsigned long bcm96358_regs_spi[] = {
-+	__GEN_SPI_REGS_TABLE(6358)
-+};
-+
-+const unsigned long *bcm63xx_regs_spi;
-+EXPORT_SYMBOL(bcm63xx_regs_spi);
-+
-+static __init void bcm63xx_spi_regs_init(void)
-+{
-+	if (BCMCPU_IS_6338())
-+		bcm63xx_regs_spi = bcm96338_regs_spi;
-+	if (BCMCPU_IS_6348())
-+		bcm63xx_regs_spi = bcm96348_regs_spi;
-+	if (BCMCPU_IS_6358())
-+		bcm63xx_regs_spi = bcm96358_regs_spi;
-+}
-+#else
-+static __init void bcm63xx_spi_regs_init(void) { }
-+#endif
-+
-+static struct resource spi_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct bcm63xx_spi_pdata spi_pdata = {
-+	.bus_num		= 0,
-+	.num_chipselect		= 8,
-+	.speed_hz		= 50000000,	/* Fclk */
-+};
-+
-+static struct platform_device bcm63xx_spi_device = {
-+	.name		= "bcm63xx-spi",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(spi_resources),
-+	.resource	= spi_resources,
-+	.dev		= {
-+		.platform_data = &spi_pdata,
-+	},
-+};
-+
-+int __init bcm63xx_spi_register(void)
-+{
-+	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
-+	spi_resources[0].end = spi_resources[0].start;
-+	spi_resources[0].end += RSET_SPI_SIZE - 1;
-+	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-+
-+	if (BCMCPU_IS_6345())
-+		return -ENODEV;
-+
-+	/* Fill in platform data */
-+	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-+		spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE;
-+
-+	if (BCMCPU_IS_6358())
-+		spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE;
-+
-+	bcm63xx_spi_regs_init();
-+
-+	return platform_device_register(&bcm63xx_spi_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -109,6 +109,7 @@ enum bcm63xx_regs_set {
- #define RSET_WDT_SIZE			12
- #define RSET_ENET_SIZE			2048
- #define RSET_ENETDMA_SIZE		2048
-+#define RSET_SPI_SIZE			256
- #define RSET_UART_SIZE			24
- #define RSET_UDC_SIZE			256
- #define RSET_OHCI_SIZE			256
-@@ -214,7 +215,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART0_BASE		(0xfffe0100)
- #define BCM_6358_UART1_BASE		(0xfffe0120)
- #define BCM_6358_GPIO_BASE		(0xfffe0080)
--#define BCM_6358_SPI_BASE		(0xdeadbeef)
-+#define BCM_6358_SPI_BASE		(0xfffe0800)
- #define BCM_6358_UDC0_BASE		(0xfffe0400)
- #define BCM_6358_OHCI0_BASE		(0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
-@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs
-  */
- enum bcm63xx_irq {
- 	IRQ_TIMER = 0,
-+	IRQ_SPI,
- 	IRQ_UART0,
- 	IRQ_UART1,
- 	IRQ_DSL,
-@@ -507,6 +509,7 @@ enum bcm63xx_irq {
-  * 6348 irqs
-  */
- #define BCM_6348_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
-+#define BCM_6348_SPI_IRQ		(IRQ_INTERNAL_BASE + 1)
- #define BCM_6348_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
- #define BCM_6348_UDC0_IRQ		(IRQ_INTERNAL_BASE + 6)
-@@ -531,6 +534,7 @@ enum bcm63xx_irq {
-  * 6358 irqs
-  */
- #define BCM_6358_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
-+#define BCM_6358_SPI_IRQ		(IRQ_INTERNAL_BASE + 1)
- #define BCM_6358_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6358_UART1_IRQ		(IRQ_INTERNAL_BASE + 3)
- #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -804,4 +804,116 @@
- #define DMIPSPLLCFG_N2_SHIFT		29
- #define DMIPSPLLCFG_N2_MASK		(0x7 << DMIPSPLLCFG_N2_SHIFT)
- 
-+/*************************************************************************
-+ * _REG relative to RSET_SPI
-+ *************************************************************************/
-+
-+/* BCM 6338 SPI core */
-+#define SPI_BCM_6338_SPI_CMD		0x00	/* 16-bits register */
-+#define SPI_BCM_6338_SPI_INT_STATUS	0x02
-+#define SPI_BCM_6338_SPI_INT_MASK_ST	0x03
-+#define SPI_BCM_6338_SPI_INT_MASK	0x04
-+#define SPI_BCM_6338_SPI_ST		0x05
-+#define SPI_BCM_6338_SPI_CLK_CFG	0x06
-+#define SPI_BCM_6338_SPI_FILL_BYTE	0x07
-+#define SPI_BCM_6338_SPI_MSG_TAIL	0x09
-+#define SPI_BCM_6338_SPI_RX_TAIL	0x0b
-+#define SPI_BCM_6338_SPI_MSG_CTL	0x40
-+#define SPI_BCM_6338_SPI_MSG_DATA	0x41
-+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE	0x3f
-+#define SPI_BCM_6338_SPI_RX_DATA	0x80
-+#define SPI_BCM_6338_SPI_RX_DATA_SIZE	0x3f
-+
-+/* BCM 6348 SPI core */
-+#define SPI_BCM_6348_SPI_CMD		0x00	/* 16-bits register */
-+#define SPI_BCM_6348_SPI_INT_STATUS	0x02
-+#define SPI_BCM_6348_SPI_INT_MASK_ST	0x03
-+#define SPI_BCM_6348_SPI_INT_MASK	0x04
-+#define SPI_BCM_6348_SPI_ST		0x05
-+#define SPI_BCM_6348_SPI_CLK_CFG	0x06
-+#define SPI_BCM_6348_SPI_FILL_BYTE	0x07
-+#define SPI_BCM_6348_SPI_MSG_TAIL	0x09
-+#define SPI_BCM_6348_SPI_RX_TAIL	0x0b
-+#define SPI_BCM_6348_SPI_MSG_CTL	0x40
-+#define SPI_BCM_6348_SPI_MSG_DATA	0x41
-+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE	0x3f
-+#define SPI_BCM_6348_SPI_RX_DATA	0x80
-+#define SPI_BCM_6348_SPI_RX_DATA_SIZE	0x3f
-+
-+/* BCM 6358 SPI core */
-+#define SPI_BCM_6358_SPI_MSG_CTL	0x00	/* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_MSG_DATA	0x02
-+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE	0x21e
-+
-+#define SPI_BCM_6358_SPI_RX_DATA	0x400
-+#define SPI_BCM_6358_SPI_RX_DATA_SIZE	0x220
-+
-+#define SPI_BCM_6358_SPI_CMD		0x700	/* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_INT_STATUS	0x702
-+#define SPI_BCM_6358_SPI_INT_MASK_ST	0x703
-+
-+#define SPI_BCM_6358_SPI_INT_MASK	0x704
-+
-+#define SPI_BCM_6358_SPI_ST		0x705
-+
-+#define SPI_BCM_6358_SPI_CLK_CFG	0x706
-+
-+#define SPI_BCM_6358_SPI_FILL_BYTE	0x707
-+#define SPI_BCM_6358_SPI_MSG_TAIL	0x709
-+#define SPI_BCM_6358_SPI_RX_TAIL	0x70B
-+
-+/* Shared SPI definitions */
-+
-+/* Message configuration */
-+#define SPI_FD_RW			0x00
-+#define SPI_HD_W			0x01
-+#define SPI_HD_R			0x02
-+#define SPI_BYTE_CNT_SHIFT		0
-+#define SPI_MSG_TYPE_SHIFT		14
-+
-+/* Command */
-+#define SPI_CMD_NOOP			0x00
-+#define SPI_CMD_SOFT_RESET		0x01
-+#define SPI_CMD_HARD_RESET		0x02
-+#define SPI_CMD_START_IMMEDIATE		0x03
-+#define SPI_CMD_COMMAND_SHIFT		0
-+#define SPI_CMD_COMMAND_MASK		0x000f
-+#define SPI_CMD_DEVICE_ID_SHIFT		4
-+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT	8
-+#define SPI_CMD_ONE_BYTE_SHIFT		11
-+#define SPI_CMD_ONE_WIRE_SHIFT		12
-+#define SPI_DEV_ID_0			0
-+#define SPI_DEV_ID_1			1
-+#define SPI_DEV_ID_2			2
-+#define SPI_DEV_ID_3			3
-+
-+/* Interrupt mask */
-+#define SPI_INTR_CMD_DONE		0x01
-+#define SPI_INTR_RX_OVERFLOW		0x02
-+#define SPI_INTR_TX_UNDERFLOW		0x04
-+#define SPI_INTR_TX_OVERFLOW		0x08
-+#define SPI_INTR_RX_UNDERFLOW		0x10
-+#define SPI_INTR_CLEAR_ALL		0x1f
-+
-+/* Status */
-+#define SPI_RX_EMPTY			0x02
-+#define SPI_CMD_BUSY			0x04
-+#define SPI_SERIAL_BUSY			0x08
-+
-+/* Clock configuration */
-+#define SPI_CLK_20MHZ			0x00
-+#define SPI_CLK_0_391MHZ		0x01
-+#define SPI_CLK_0_781MHZ		0x02 /* default */
-+#define SPI_CLK_1_563MHZ		0x03
-+#define SPI_CLK_3_125MHZ		0x04
-+#define SPI_CLK_6_250MHZ		0x05
-+#define SPI_CLK_12_50MHZ		0x06
-+#define SPI_CLK_25MHZ			0x07
-+#define SPI_CLK_MASK			0x07
-+#define SPI_SSOFFTIME_MASK		0x38
-+#define SPI_SSOFFTIME_SHIFT		3
-+#define SPI_BYTE_SWAP			0x80
-+
- #endif /* BCM63XX_REGS_H_ */
---- /dev/null
-+++ b/drivers/spi/bcm63xx_spi.c
-@@ -0,0 +1,496 @@
-+/*
-+ * Broadcom BCM63xx SPI controller support
-+ *
-+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/completion.h>
-+#include <linux/err.h>
-+
-+#include <bcm63xx_dev_spi.h>
-+
-+#define PFX 		KBUILD_MODNAME
-+#define DRV_VER		"0.1.2"
-+
-+struct bcm63xx_spi {
-+	spinlock_t              lock;
-+	int			stopping;
-+        struct completion	done;
-+
-+	void __iomem		*regs;
-+	int			irq;
-+
-+	/* Platform data */
-+        u32			speed_hz;
-+	unsigned		fifo_size;
-+
-+	/* Data buffers */
-+	const unsigned char	*tx_ptr;
-+	unsigned char		*rx_ptr;
-+
-+	/* data iomem */
-+	u8 __iomem		*tx_io;
-+	const u8 __iomem	*rx_io;
-+
-+	int			remaining_bytes;
-+
-+	struct clk		*clk;
-+	struct platform_device	*pdev;
-+};
-+
-+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
-+				unsigned int offset)
-+{
-+	return bcm_readw(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
-+				unsigned int offset)
-+{
-+	return bcm_readw(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
-+				  u8 value, unsigned int offset)
-+{
-+	bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
-+				  u16 value, unsigned int offset)
-+{
-+	bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-+				      struct spi_transfer *t)
-+{
-+	u8 bits_per_word;
-+	u8 clk_cfg;
-+	u32 hz;
-+	unsigned int div;
-+
-+	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+
-+	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-+	hz = (t) ? t->speed_hz : spi->max_speed_hz;
-+	if (bits_per_word != 8) {
-+		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+			__func__, bits_per_word);
-+		return -EINVAL;
-+        }
-+
-+	if (spi->chip_select > spi->master->num_chipselect) {
-+		dev_err(&spi->dev, "%s, unsupported slave %d\n",
-+			__func__, spi->chip_select);
-+		return -EINVAL;
-+	}
-+
-+	/* Check clock setting */
-+	div = (bs->speed_hz / hz);
-+	switch (div) {
-+	case 2:
-+		clk_cfg = SPI_CLK_25MHZ;
-+		break;
-+	case 4:
-+		clk_cfg = SPI_CLK_12_50MHZ;
-+		break;
-+	case 8:
-+		clk_cfg = SPI_CLK_6_250MHZ;
-+		break;
-+	case 16:
-+		clk_cfg = SPI_CLK_3_125MHZ;
-+		break;
-+	case 32:
-+		clk_cfg = SPI_CLK_1_563MHZ;
-+		break;
-+	case 64:
-+		clk_cfg = SPI_CLK_0_781MHZ;
-+		break;
-+	case 128:
-+	default:
-+		/* Set to slowest mode for compatibility */
-+		clk_cfg = SPI_CLK_0_391MHZ;
-+		break;
-+	}
-+
-+	bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG);
-+	dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
-+		div, hz, clk_cfg);
-+
-+	return 0;
-+}
-+
-+/* the spi->mode bits understood by this driver: */
-+#define MODEBITS (SPI_CPOL | SPI_CPHA)
-+
-+static int bcm63xx_spi_setup(struct spi_device *spi)
-+{
-+	struct bcm63xx_spi *bs;
-+	int ret;
-+
-+	bs = spi_master_get_devdata(spi->master);
-+
-+	if (bs->stopping)
-+		return -ESHUTDOWN;
-+
-+	if (!spi->bits_per_word)
-+		spi->bits_per_word = 8;
-+
-+	if (spi->mode & ~MODEBITS) {
-+		dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-+			__func__, spi->mode & ~MODEBITS);
-+		return -EINVAL;
-+	}
-+
-+	ret = bcm63xx_spi_setup_transfer(spi, NULL);
-+	if (ret < 0) {
-+		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-+			spi->mode & ~MODEBITS);
-+		return ret;
-+	}
-+
-+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-+		__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
-+
-+	return 0;
-+}
-+
-+/* Fill the TX FIFO with as many bytes as possible */
-+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-+{
-+	u8 size;
-+
-+        /* Fill the Tx FIFO with as many bytes as possible */
-+	size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
-+		bs->fifo_size;
-+	memcpy_toio(bs->tx_io, bs->tx_ptr, size);
-+	bs->remaining_bytes -= size;
-+}
-+
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+	u16 msg_ctl;
-+	u16 cmd;
-+
-+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-+		t->tx_buf, t->rx_buf, t->len);
-+
-+	/* Transmitter is inhibited */
-+	bs->tx_ptr = t->tx_buf;
-+	bs->rx_ptr = t->rx_buf;
-+	init_completion(&bs->done);
-+
-+	if (t->tx_buf) {
-+		bs->remaining_bytes = t->len;
-+		bcm63xx_spi_fill_tx_fifo(bs);
-+	}
-+
-+	/* Enable the command done interrupt which
-+	 * we use to determine completion of a command */
-+	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+
-+	/* Fill in the Message control register */
-+	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+
-+	if (t->rx_buf && t->tx_buf)
-+		msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
-+	else if (t->rx_buf)
-+		msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
-+	else if (t->tx_buf)
-+		msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-+
-+	bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
-+
-+	/* Issue the transfer */
-+	cmd = SPI_CMD_START_IMMEDIATE;
-+	cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
-+	bcm_spi_writew(bs, cmd, SPI_CMD);
-+	wait_for_completion(&bs->done);
-+
-+	/* Disable the CMD_DONE interrupt */
-+	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+	return t->len - bs->remaining_bytes;
-+}
-+
-+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
-+{
-+	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+	struct spi_transfer *t;
-+	int ret = 0;
-+
-+	if (unlikely(list_empty(&m->transfers)))
-+		return -EINVAL;
-+
-+	if (bs->stopping)
-+		return -ESHUTDOWN;
-+
-+	list_for_each_entry(t, &m->transfers, transfer_list) {
-+		ret += bcm63xx_txrx_bufs(spi, t);
-+	}
-+
-+	m->complete(m->context);
-+
-+	return ret;
-+}
-+
-+/* This driver supports single master mode only. Hence
-+ * CMD_DONE is the only interrupt we care about
-+ */
-+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
-+{
-+	struct spi_master *master = (struct spi_master *)dev_id;
-+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+	u8 intr;
-+	u16 cmd;
-+
-+	/* Read interupts and clear them immediately */
-+	intr = bcm_spi_readb(bs, SPI_INT_STATUS);
-+	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+	/* A tansfer completed */
-+	if (intr & SPI_INTR_CMD_DONE) {
-+		u8 rx_tail;
-+
-+		rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+		/* Read out all the data */
-+		if (rx_tail)
-+			memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+
-+		/* See if there is more data to send */
-+		if (bs->remaining_bytes > 0) {
-+			bcm63xx_spi_fill_tx_fifo(bs);
-+
-+			/* Start the transfer */
-+			bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-+				       SPI_MSG_CTL);
-+			cmd = bcm_spi_readw(bs, SPI_CMD);
-+			cmd |= SPI_CMD_START_IMMEDIATE;
-+			cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+			bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+			bcm_spi_writew(bs, cmd, SPI_CMD);
-+		} else {
-+			complete(&bs->done);
-+		}
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+static int __init bcm63xx_spi_probe(struct platform_device *pdev)
-+{
-+	struct resource *r;
-+	struct device *dev = &pdev->dev;
-+	struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
-+	int irq;
-+	struct spi_master *master;
-+	struct clk *clk;
-+	struct bcm63xx_spi *bs;
-+	int ret;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!r) {
-+		dev_err(dev, "no iomem\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(dev, "no irq\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	clk = clk_get(dev, "spi");
-+	if (IS_ERR(clk)) {
-+		dev_err(dev, "no clock for device\n");
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	master = spi_alloc_master(dev, sizeof(*bs));
-+	if (!master) {
-+		dev_err(dev, "out of memory\n");
-+		ret = -ENOMEM;
-+		goto out_free;
-+	}
-+
-+	bs = spi_master_get_devdata(master);
-+	init_completion(&bs->done);
-+
-+	platform_set_drvdata(pdev, master);
-+	bs->pdev = pdev;
-+
-+	if (!request_mem_region(r->start, r->end - r->start, PFX)) {
-+		dev_err(dev, "iomem request failed\n");
-+		ret = -ENXIO;
-+		goto out_put_master;
-+	}
-+
-+	bs->regs = ioremap_nocache(r->start, r->end - r->start);
-+	if (!bs->regs) {
-+		dev_err(dev, "unable to ioremap regs\n");
-+		ret = -ENOMEM;
-+		goto out_put_master;
-+	}
-+	bs->irq = irq;
-+	bs->clk = clk;
-+	bs->fifo_size = pdata->fifo_size;
-+
-+	ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master);
-+	if (ret) {
-+		dev_err(dev, "unable to request irq\n");
-+		goto out_unmap;
-+	}
-+
-+	master->bus_num = pdata->bus_num;
-+	master->num_chipselect = pdata->num_chipselect;
-+	master->setup = bcm63xx_spi_setup;
-+	master->transfer = bcm63xx_transfer;
-+	bs->speed_hz = pdata->speed_hz;
-+	bs->stopping = 0;
-+	bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
-+	bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-+	spin_lock_init(&bs->lock);
-+
-+	/* Initialize hardware */
-+	clk_enable(bs->clk);
-+	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+
-+	/* register and we are done */
-+	ret = spi_register_master(master);
-+	if (ret) {
-+		dev_err(dev, "spi register failed\n");
-+		goto out_reset_hw;
-+	}
-+
-+	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
-+		 r->start, irq, bs->fifo_size, DRV_VER);
-+
-+	return 0;
-+
-+out_reset_hw:
-+	clk_disable(clk);
-+	free_irq(irq, master);
-+out_unmap:
-+	iounmap(bs->regs);
-+out_put_master:
-+	spi_master_put(master);
-+out_free:
-+	clk_put(clk);
-+out:
-+	return ret;
-+}
-+
-+static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
-+{
-+	struct spi_master	*master = platform_get_drvdata(pdev);
-+	struct bcm63xx_spi	*bs = spi_master_get_devdata(master);
-+	struct resource		*r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	/* reset spi block */
-+	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+	spin_lock(&bs->lock);
-+	bs->stopping = 1;
-+
-+	/* HW shutdown */
-+	clk_disable(bs->clk);
-+	clk_put(bs->clk);
-+
-+	spin_unlock(&bs->lock);
-+
-+	free_irq(bs->irq, master);
-+	iounmap(bs->regs);
-+	release_mem_region(r->start, r->end - r->start);
-+	platform_set_drvdata(pdev, 0);
-+	spi_unregister_master(master);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+	struct spi_master	*master = platform_get_drvdata(pdev);
-+	struct bcm63xx_spi	*bs = spi_master_get_devdata(master);
-+
-+        clk_disable(bs->clk);
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_spi_resume(struct platform_device *pdev)
-+{
-+	struct spi_master	*master = platform_get_drvdata(pdev);
-+	struct bcm63xx_spi	*bs = spi_master_get_devdata(master);
-+
-+	clk_enable(bs->clk);
-+
-+	return 0;
-+}
-+#else
-+#define bcm63xx_spi_suspend	NULL
-+#define bcm63xx_spi_resume	NULL
-+#endif
-+
-+static struct platform_driver bcm63xx_spi_driver = {
-+	.driver = {
-+		.name	= "bcm63xx-spi",
-+		.owner	= THIS_MODULE,
-+	},
-+	.probe		= bcm63xx_spi_probe,
-+	.remove		= __exit_p(bcm63xx_spi_remove),
-+	.suspend	= bcm63xx_spi_suspend,
-+	.resume		= bcm63xx_spi_resume,
-+};
-+
-+
-+static int __init bcm63xx_spi_init(void)
-+{
-+	return platform_driver_register(&bcm63xx_spi_driver);
-+}
-+
-+static void __exit bcm63xx_spi_exit(void)
-+{
-+	platform_driver_unregister(&bcm63xx_spi_driver);
-+}
-+
-+module_init(bcm63xx_spi_init);
-+module_exit(bcm63xx_spi_exit);
-+
-+MODULE_ALIAS("platform:bcm63xx_spi");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
-+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VER);
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -74,6 +74,12 @@ config SPI_ATMEL
- 	  This selects a driver for the Atmel SPI Controller, present on
- 	  many AT32 (AVR32) and AT91 (ARM) chips.
- 
-+config SPI_BCM63XX
-+	tristate "Broadcom BCM63xx SPI controller"
-+	depends on BCM63XX
-+	help
-+	  This is the SPI controller master driver for Broadcom BCM63xx SoC.
-+
- config SPI_BFIN
- 	tristate "SPI controller driver for ADI Blackfin5xx"
- 	depends on BLACKFIN
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.
- obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
- obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
-+obj-$(CONFIG_SPI_BCM63XX)		+= bcm63xx_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -0,0 +1,85 @@
-+#ifndef BCM63XX_DEV_SPI_H
-+#define BCM63XX_DEV_SPI_H
-+
-+#include <linux/types.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+int __init bcm63xx_spi_register(void);
-+
-+struct bcm63xx_spi_pdata {
-+	unsigned int	fifo_size;
-+	int		bus_num;
-+	int		num_chipselect;
-+	u32		speed_hz;
-+};
-+
-+enum bcm63xx_regs_spi {
-+        SPI_CMD,
-+        SPI_INT_STATUS,
-+        SPI_INT_MASK_ST,
-+        SPI_INT_MASK,
-+        SPI_ST,
-+        SPI_CLK_CFG,
-+        SPI_FILL_BYTE,
-+        SPI_MSG_TAIL,
-+        SPI_RX_TAIL,
-+        SPI_MSG_CTL,
-+        SPI_MSG_DATA,
-+        SPI_RX_DATA,
-+};
-+
-+#define __GEN_SPI_RSET_BASE(__cpu, __rset)				\
-+	case SPI_## __rset:						\
-+		return SPI_BCM_## __cpu ##_SPI_## __rset;
-+
-+#define __GEN_SPI_RSET(__cpu)						\
-+	switch (reg) {							\
-+	__GEN_SPI_RSET_BASE(__cpu, CMD)					\
-+	__GEN_SPI_RSET_BASE(__cpu, INT_STATUS)				\
-+	__GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)				\
-+	__GEN_SPI_RSET_BASE(__cpu, INT_MASK)				\
-+	__GEN_SPI_RSET_BASE(__cpu, ST)					\
-+	__GEN_SPI_RSET_BASE(__cpu, CLK_CFG)				\
-+	__GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)				\
-+	__GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)				\
-+	__GEN_SPI_RSET_BASE(__cpu, RX_TAIL)				\
-+	__GEN_SPI_RSET_BASE(__cpu, MSG_CTL)				\
-+	__GEN_SPI_RSET_BASE(__cpu, MSG_DATA)				\
-+	__GEN_SPI_RSET_BASE(__cpu, RX_DATA)				\
-+	}
-+
-+#define __GEN_SPI_REGS_TABLE(__cpu)					\
-+	[SPI_CMD]		= SPI_BCM_## __cpu ##_SPI_CMD,		\
-+	[SPI_INT_STATUS]	= SPI_BCM_## __cpu ##_SPI_INT_STATUS,	\
-+	[SPI_INT_MASK_ST]	= SPI_BCM_## __cpu ##_SPI_INT_MASK_ST,	\
-+	[SPI_INT_MASK]		= SPI_BCM_## __cpu ##_SPI_INT_MASK,	\
-+	[SPI_ST]		= SPI_BCM_## __cpu ##_SPI_ST,		\
-+	[SPI_CLK_CFG]		= SPI_BCM_## __cpu ##_SPI_CLK_CFG,	\
-+	[SPI_FILL_BYTE]		= SPI_BCM_## __cpu ##_SPI_FILL_BYTE,	\
-+	[SPI_MSG_TAIL]		= SPI_BCM_## __cpu ##_SPI_MSG_TAIL,	\
-+	[SPI_RX_TAIL]		= SPI_BCM_## __cpu ##_SPI_RX_TAIL,	\
-+	[SPI_MSG_CTL]		= SPI_BCM_## __cpu ##_SPI_MSG_CTL,	\
-+	[SPI_MSG_DATA]		= SPI_BCM_## __cpu ##_SPI_MSG_DATA,	\
-+	[SPI_RX_DATA]		= SPI_BCM_## __cpu ##_SPI_RX_DATA,
-+
-+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+	extern const unsigned long *bcm63xx_regs_spi;
-+        return bcm63xx_regs_spi[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+	__GEN_SPI_RSET(6338)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	__GEN_SPI_RSET(6348)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+	__GEN_SPI_RSET(6358)
-+#endif
-+#endif
-+	return 0;
-+}
-+
-+#endif /* BCM63XX_DEV_SPI_H */
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- 		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
--		   dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
-+		   dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -30,6 +30,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_udc.h>
-+#include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -933,6 +934,8 @@ int __init board_register_devices(void)
- 	if (board.num_spis)
- 		spi_register_board_info(board.spis, board.num_spis);
- 
-+	bcm63xx_spi_register();
-+
- 	/* read base address of boot chip select (0) */
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
diff --git a/target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch
deleted file mode 100644
index a80a23f..0000000
--- a/target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -32,9 +32,13 @@
- #include <bcm63xx_dev_usb_udc.h>
- #include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-+#include <bcm_tag.h>
- 
- #define PFX	"board_bcm963xx: "
- 
-+#define CFE_OFFSET_64K		0x10000
-+#define CFE_OFFSET_128K		0x20000
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -734,6 +738,29 @@ static int board_get_mac_address(u8 *mac
- 	return 0;
- }
- 
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+
-+	/* check if bcm_tag is at 64k offset */
-+	if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+		/* else try 128k */
-+		tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+		if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+			/* No tag found */
-+			printk(KERN_DEBUG "No bcm_tag found!\n");
-+			return;
-+		}
-+	}
-+	/* check if we should override the boardid */
-+	if (tag->information1[0] != '+')
-+		return;
-+
-+	strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
-+
-+	printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
-+}
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -776,6 +803,11 @@ void __init board_prom_init(void)
- 		return;
- 	}
- 
-+	if (strcmp(cfe_version, "unknown") != 0) {
-+		/* cfe present */
-+		boardid_fixup(boot_addr);
-+	}
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch b/target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch
deleted file mode 100644
index 6321ed1..0000000
--- a/target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -861,18 +861,6 @@ void __init board_prom_init(void)
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
--
--	/* Generate MAC address for WLAN and
--	 * register our SPROM */
--#ifdef CONFIG_SSB_PCIHOST
--	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		if (ssb_arch_register_fallback_sprom(
--				&bcm63xx_get_fallback_sprom) < 0)
--			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
--	}
--#endif
- }
- 
- /*
-@@ -948,6 +936,19 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
-+	/* Generate MAC address for WLAN and
-+	 * register our SPROM, do this after registering enet devices
-+	 */
-+#ifdef CONFIG_SSB_PCIHOST
-+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		if (ssb_arch_register_fallback_sprom(
-+				&bcm63xx_get_fallback_sprom) < 0)
-+			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
-+	}
-+#endif
-+
- 	if (board.has_ehci0)
- 		bcm63xx_ehci_register();
- 
diff --git a/target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch
deleted file mode 100644
index d9f891f..0000000
--- a/target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch
+++ /dev/null
@@ -1,113 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -603,6 +603,99 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- 	.has_ehci0 = 1,
-+
-+	.leds = {
-+		/*Each led on alice gate is bi-color */
-+		{
-+			.name		= "power:red",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:green",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:red",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 23,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:green",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:green",
-+			.gpio		= 25,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:red",
-+			.gpio		= 24,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr1:red",
-+			.gpio		= 27,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr1:green",
-+			.gpio		= 26,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr2:red",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr2:green",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc           = "reset",
-+			.gpio           = 37,
-+			.active_low     = 1,
-+			.type           = EV_KEY,
-+			.code           = KEY_RESTART,
-+			.threshold      = 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_DWVS0 = {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,7 +57,7 @@ struct board_info {
- 	struct bcm63xx_dsp_platform_data dsp;
- 
- 	/* GPIO LEDs */
--	struct gpio_led leds[5];
-+	struct gpio_led leds[14];
- 
- 	/* Buttons */
- 	struct gpio_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch
deleted file mode 100644
index 7c5027f..0000000
--- a/target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -475,6 +475,19 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usb",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+		}
-+	},
- };
- #endif
- 
diff --git a/target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch b/target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch
deleted file mode 100644
index 07f6159..0000000
--- a/target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -489,6 +489,55 @@ static struct board_info __initdata boar
- 		}
- 	},
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+	.name				= "D-4P-W",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+	.has_uart0 			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "power:green",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "status",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:green",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:red",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -753,6 +802,7 @@ static const struct board_info __initdat
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
-+	&board_96348_D4PW,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/441-board-NB4.patch b/target/linux/brcm63xx/patches-3.1/441-board-NB4.patch
deleted file mode 100644
index b2fb0e2..0000000
--- a/target/linux/brcm63xx/patches-3.1/441-board-NB4.patch
+++ /dev/null
@@ -1,569 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,9 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -39,6 +42,12 @@
- #define CFE_OFFSET_64K		0x10000
- #define CFE_OFFSET_128K		0x20000
- 
-+#define NB4_PID_OFFSET		0xff80
-+#define NB4_74X164_GPIO_BASE	64
-+#define NB4_SPI_GPIO_MOSI	7
-+#define NB4_SPI_GPIO_CLK	6
-+#define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -780,6 +789,502 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0			= 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+	.sck		= NB4_SPI_GPIO_CLK,
-+	.mosi		= NB4_SPI_GPIO_MOSI,
-+	.miso		= SPI_GPIO_NO_MISO,
-+	.num_chipselect	= 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+	.name = "spi_gpio",
-+	.id   = 1,
-+	.dev = {
-+		.platform_data = &nb4_spi_gpio_data,
-+	},
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+	&nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+	.base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+	{
-+		.modalias = "74x164",
-+		.max_speed_hz = 781000,
-+		.bus_num = 1,
-+		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+		.mode = SPI_MODE_0,
-+		.platform_data = &nb4_74x164_platform_data
-+	}
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+	.name				= "NB4-SER-r0",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+	.name				= "NB4-SER-r1",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+	.name				= "NB4-SER-r2",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+	.name				= "NB4-FXC-r1",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+	.name				= "NB4-FXC-r2",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
- 
- /*
-@@ -810,9 +1315,30 @@ static const struct board_info __initdat
- 	&board_96358vw2,
- 	&board_AGPFS0,
- 	&board_DWVS0,
-+	&board_nb4_ser_r0,
-+	&board_nb4_ser_r1,
-+	&board_nb4_ser_r2,
-+	&board_nb4_fxc_r1,
-+	&board_nb4_fxc_r2,
- #endif
- };
- 
-+static void __init nb4_nvram_fixup(void)
-+{
-+	u8 *boot_addr, *p;
-+	u32 val;
-+
-+	if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
-+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+		val &= MPI_CSBASE_BASE_MASK;
-+		boot_addr = (u8 *)KSEG1ADDR(val);
-+		/* Extract nb4 PID */
-+		p = boot_addr + NB4_PID_OFFSET;
-+		if (!memcmp(p, "NB4-", 4))
-+			memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
-+	}
-+}
-+
- /*
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-@@ -964,6 +1490,9 @@ void __init board_prom_init(void)
- 		boardid_fixup(boot_addr);
- 	}
- 
-+	/* Fixup broken nb4 board name */
-+	nb4_nvram_fixup();
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch
deleted file mode 100644
index 66ced55..0000000
--- a/target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -146,6 +146,38 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+	.name				= "96338W2_E7T",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+		.leds = {
-+		{
-+			.name		= "ppp",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "ppp-fail",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -1294,6 +1326,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
- 	&board_96338w,
-+	&board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch
deleted file mode 100644
index 0ace02d..0000000
--- a/target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch
+++ /dev/null
@@ -1,109 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -685,6 +685,98 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_CPVA642 = {
-+	.name                           = "CPVA642",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+
-+	.enet1 = {
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+ 	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+	    /* bi-color */
-+		{
-+			.name		= "power:red",
-+			.gpio		= 14,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:green",
-+			.gpio		= 28,
-+			.active_low	= 0,
-+		},
-+		{
-+			.name		= "link:red",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "link:green",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+		/* green only */
-+		{
-+			.name		= "ether",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "phone1",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "phone2",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usb",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+    },
-+
-+	.buttons = {
-+		{
-+			.desc           = "reset",
-+			.gpio           = 36,
-+			.active_low     = 1,
-+			.type           = EV_KEY,
-+			.code           = KEY_RESTART,
-+			.threshold      = 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
- 	.name                           = "AGPF-S0",
- 	.expected_cpu_id                = 0x6358,
-@@ -1347,6 +1439,7 @@ static const struct board_info __initdat
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
-+	&board_CPVA642,
- 	&board_DWVS0,
- 	&board_nb4_ser_r0,
- 	&board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch
deleted file mode 100644
index 5bafc77..0000000
--- a/target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -914,6 +914,59 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- };
- 
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+	.name				= "AW4139",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "dsl-274xb:green:power",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "dsl-274xb:red:power",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-274xb:green:adsl",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-274xb:green:internet",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "dsl-274xb:red:internet",
-+			.gpio		= 10,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- struct spi_gpio_platform_data nb4_spi_gpio_data = {
- 	.sck		= NB4_SPI_GPIO_CLK,
- 	.mosi		= NB4_SPI_GPIO_MOSI,
-@@ -1441,6 +1494,7 @@ static const struct board_info __initdat
- 	&board_AGPFS0,
- 	&board_CPVA642,
- 	&board_DWVS0,
-+	&board_dsl_274xb_rev_c,
- 	&board_nb4_ser_r0,
- 	&board_nb4_ser_r1,
- 	&board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch b/target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch
deleted file mode 100644
index e2215f2..0000000
--- a/target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -579,6 +579,67 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_spw500v = {
-+	.name				= "SPW500V",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "power:red",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "ppp",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{	.name		= "pstn",
-+			.gpio		= 28,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "voip",
-+			.gpio		= 32,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -1486,6 +1547,7 @@ static const struct board_info __initdat
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
-+	&board_spw500v,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch
deleted file mode 100644
index 08d4021..0000000
--- a/target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -432,6 +432,112 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_gw6200 = {
-+	.name				= "GW6200",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+		.dsp = {
-+        .gpio_rst		= 8, /* FIXME: What is real GPIO here? */
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "line1",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line2",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line3",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+	.name				= "GW6000",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	/* GW6000 has no GPIO-controlled leds */
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- 	.name				= "F@ST2404",
- 	.expected_cpu_id		= 0x6348,
-@@ -1540,6 +1646,8 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
- 	&board_96348gw,
-+	&board_gw6000,
-+	&board_gw6200,
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch
deleted file mode 100644
index 1db6933..0000000
--- a/target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -746,6 +746,76 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96348sv = {
-+	.name				= "MAGIC",
-+	.expected_cpu_id	= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy			= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		/* is has BP_ENET_EXTERNAL_PHY */
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 25,
-+		.gpio_int		= 34,
-+		.cs				= 2,
-+		.ext_irq		= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "voip",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 28,
-+		},
-+		{
-+			.name		= "usb",
-+			.gpio		= 35,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "hpna",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "stop",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -1656,6 +1726,7 @@ static const struct board_info __initdat
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
- 	&board_spw500v,
-+	&board_96348sv,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/449-board_hw553.patch b/target/linux/brcm63xx/patches-3.1/449-board_hw553.patch
deleted file mode 100644
index 9fe0c29..0000000
--- a/target/linux/brcm63xx/patches-3.1/449-board_hw553.patch
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1699,6 +1699,81 @@ static struct board_info __initdata boar
- 	.spis = nb4_spi_devices,
- 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+	.name                           = "HW553",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet0                      = 1,
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+
-+	.enet0 = {
-+		.has_phy                = 1,
-+		.use_internal_phy       = 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		/*Each led on HW553 is bi-color (except wifi) */
-+		{
-+			.name		= "lan:red",
-+			.gpio		= 34,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "lan:blue",
-+			.gpio		= 35,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:red",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:blue",
-+			.gpio		= 23,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:red",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+
-+		{
-+			.name		= "power:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 25,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internetkey:red",
-+			.gpio		= 12,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internetkey:blue",
-+			.gpio		= 13,
-+			.active_low	= 1,
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -1741,6 +1816,7 @@ static const struct board_info __initdat
- 	&board_nb4_ser_r2,
- 	&board_nb4_fxc_r1,
- 	&board_nb4_fxc_r2,
-+	&board_HW553,
- #endif
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch
deleted file mode 100644
index 39f2eab..0000000
--- a/target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -178,6 +178,43 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+	.name				= "RTA1320_16M",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+		.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "ppp",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "stop",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -1784,6 +1821,7 @@ static const struct board_info __initdat
- 	&board_96338gw,
- 	&board_96338w,
- 	&board_96338w2_e7t,
-+	&board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch b/target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch
deleted file mode 100644
index deae366..0000000
--- a/target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1811,6 +1811,72 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+	.name			= "96358-502V",
-+	.expected_cpu_id	= 0x6358,
-+
-+	.has_uart0		= 1,
-+	.has_enet0		= 1,
-+	.has_pci		= 1,
-+
-+	.enet0 = {
-+		.has_phy 		= 1,
-+		.use_internal_phy 	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "spw303v:green:power+adsl",
-+			.gpio		= 22,
-+			.active_low 	= 1,
-+		},
-+		{
-+			.name		= "spw303v:red:power+adsl",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "spw303v:green:ppp",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "spw303v:green:ses",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "spw303v:green:voip",
-+			.gpio		= 27,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "spw303v:green:pots",
-+			.gpio		= 31,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 11,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "ses",
-+			.gpio		= 37,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	}
-+};
- #endif
- 
- /*
-@@ -1855,6 +1921,7 @@ static const struct board_info __initdat
- 	&board_nb4_fxc_r1,
- 	&board_nb4_fxc_r2,
- 	&board_HW553,
-+	&board_spw303v,
- #endif
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch b/target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch
deleted file mode 100644
index a7ab289..0000000
--- a/target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -853,6 +853,63 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+	static struct board_info __initdata board_V2500V_BB = {
-+        .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_uart0                      = 1,
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+        },
-+
-+	.leds = {
-+		{
-+			.name		= "power:green",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "power:red",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{	.name		= "ppp",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wireless",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 31,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -1906,6 +1963,7 @@ static const struct board_info __initdat
- 	&board_96348_D4PW,
- 	&board_spw500v,
- 	&board_96348sv,
-+	&board_V2500V_BB,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2059,6 +2117,22 @@ void __init board_prom_init(void)
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
- 	boot_addr = (u8 *)KSEG1ADDR(val);
-+	printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+	/* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+	/* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+	/* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+	/* Do an early check of CFE and then select bank 0 */
-+
-+       	if (boot_addr == (u8 *)0xbf800000) {
-+		u8 *tmp_boot_addr;
-+		tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0
-+		memcpy(&nvram, tmp_boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+		if (!strcmp(nvram.name, "V2500V_BB")) {
-+	               	printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+			boot_addr = (u8 *)0xbfc00000; // Bank 0
-+		}
-+	}
- 
- 	/* dump cfe version */
- 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-@@ -2260,6 +2334,13 @@ int __init board_register_devices(void)
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
- 
-+	/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+	/* Loading from CFE always uses Bank 0 */
-+	if (!strcmp(board.name, "V2500V_BB")) {
-+		printk(KERN_INFO PFX "V2500V: Start in Bank 0\n");
-+		val = val + 0x400000; // Select Bank 0 start address
-+	}
-+
- 	mtd_resources[0].start = val;
- 	mtd_resources[0].end = 0x1FFFFFFF;
- 
diff --git a/target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch
deleted file mode 100644
index 5164ee6..0000000
--- a/target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -401,6 +401,62 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+	.name				= "V2110",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name           = "V2110:green:power",
-+			.gpio           = 0,
-+			.active_low     = 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name           = "V2110:red:power",
-+			.gpio           = 1,
-+			.active_low     = 1,
-+		},
-+		{
-+			.name           = "V2110:green:adsl",
-+			.gpio           = 2,
-+			.active_low     = 1,
-+		},
-+		{       .name           = "V2110:green:ppp",
-+			.gpio           = 3,
-+			.active_low     = 1,
-+		},
-+		{
-+			.name           = "V2110:green:wireless",
-+			.gpio           = 6,
-+			.active_low     = 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -1964,6 +2020,7 @@ static const struct board_info __initdat
- 	&board_spw500v,
- 	&board_96348sv,
- 	&board_V2500V_BB,
-+	&board_V2110,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/454-board_livebox.patch b/target/linux/brcm63xx/patches-3.1/454-board_livebox.patch
deleted file mode 100644
index b00c152..0000000
--- a/target/linux/brcm63xx/patches-3.1/454-board_livebox.patch
+++ /dev/null
@@ -1,251 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
- 	select SSB
-        help
- 
-+config BOARD_LIVEBOX
-+	bool "Inventel Livebox(es) boards"
-+	select SSB
-+	help
-+	 Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
- 
- ccflags-y := -Werror
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,228 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/gpio_buttons.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox = {
-+	.name				= "Livebox",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+	.has_ehci0			= 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox
-+#endif
-+};
-+
-+/*
-+ * early init callback
-+ */
-+void __init board_prom_init(void)
-+{
-+	u32 val;
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+
-+	/* assume board is a Livebox */
-+	memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+	/* setup pin multiplexing depending on board enabled device,
-+	 * this has to be done this early since PCI init is done
-+	 * inside arch_initcall */
-+	val = 0;
-+
-+	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G2_PCI;
-+	}
-+
-+	if (board.has_pccard) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+	}
-+
-+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+	if (!board.name[0])
-+		panic("unable to detect bcm963xx board");
-+	printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+	/* make sure we're running on expected cpu */
-+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+		panic("unexpected CPU for bcm963xx board");
-+}
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+
-+static int board_get_mac_address(u8 *mac)
-+{
-+	u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-+	u8 *p;
-+	int count;
-+
-+	memcpy(mac, default_mac, ETH_ALEN);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+        mac_addr_used++;
-+
-+	return 0;
-+}
-+
-+static struct resource mtd_resources[] = {
-+	{
-+		.start          = 0,    /* filled at runtime */
-+		.end            = 0,    /* filled at runtime */
-+		.flags          = IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct platform_device mtd_dev = {
-+	.name                   = "bcm963xx-flash",
-+	.resource               = mtd_resources,
-+	.num_resources          = ARRAY_SIZE(mtd_resources),
-+};
-+
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+	u32 val;
-+
-+	if (board.has_uart0)
-+		bcm63xx_uart_register(0);
-+
-+	if (board.has_pccard)
-+		bcm63xx_pcmcia_register();
-+
-+	if (board.has_enet0 &&
-+	    !board_get_mac_address(board.enet0.mac_addr))
-+		bcm63xx_enet_register(0, &board.enet0);
-+
-+	if (board.has_enet1 &&
-+	    !board_get_mac_address(board.enet1.mac_addr))
-+		bcm63xx_enet_register(1, &board.enet1);
-+
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+	mtd_resources[0].start = val;
-+	mtd_resources[0].end = 0x1FFFFFFF;
-+
-+	platform_device_register(&mtd_dev);
-+
-+	return 0;
-+}
-+
diff --git a/target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch
deleted file mode 100644
index dc00e43..0000000
--- a/target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -457,6 +457,49 @@ static struct board_info __initdata boar
- };
- 
- 
-+static struct board_info __initdata board_ct536_ct5621 = {
-+	.name				= "CT536_CT5621",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 0,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl-fail",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -2021,6 +2064,7 @@ static const struct board_info __initdat
- 	&board_96348sv,
- 	&board_V2500V_BB,
- 	&board_V2110,
-+	&board_ct536_ct5621,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_fixes.patch
deleted file mode 100644
index 4c21d5d..0000000
--- a/target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_fixes.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1327,6 +1327,8 @@ static struct board_info __initdata boar
- 	.name				= "DWV-S0",
- 	.expected_cpu_id		= 0x6358,
- 
-+	.has_uart0			= 1,
-+
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -1342,6 +1344,7 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
- };
- 
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.1/457-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.1/457-board_96348A-122.patch
deleted file mode 100644
index a7ee975..0000000
--- a/target/linux/brcm63xx/patches-3.1/457-board_96348A-122.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1009,6 +1009,67 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96348A_122 = {
-+	.name				= "96348A-122",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wps",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wifi",
-+			.gpio		= 34,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= BTN_0,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 35,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -2068,6 +2129,7 @@ static const struct board_info __initdat
- 	&board_V2500V_BB,
- 	&board_V2110,
- 	&board_ct536_ct5621,
-+	&board_96348A_122,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/458-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.1/458-RTA1205W_16_uart_fixes.patch
deleted file mode 100644
index 90a9a5c..0000000
--- a/target/linux/brcm63xx/patches-3.1/458-RTA1205W_16_uart_fixes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -704,6 +704,7 @@ static struct board_info __initdata boar
- 	.name				= "RTA1025W_16",
- 	.expected_cpu_id		= 0x6348,
- 
-+	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
diff --git a/target/linux/brcm63xx/patches-3.1/459_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.1/459_board_CPVA502plus.patch
deleted file mode 100644
index 426e9d0..0000000
--- a/target/linux/brcm63xx/patches-3.1/459_board_CPVA502plus.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1071,6 +1071,44 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_CPVA502plus = {
-+	.name				= "CPVA502+",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "phone",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "link",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "feth1", /* FIXME:does gpio4 enable eth1 phy? */
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -2131,6 +2169,7 @@ static const struct board_info __initdat
- 	&board_V2110,
- 	&board_ct536_ct5621,
- 	&board_96348A_122,
-+	&board_CPVA502plus,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/460-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.1/460-board_96348gw-10_reset_button.patch
deleted file mode 100644
index 77124c0..0000000
--- a/target/linux/brcm63xx/patches-3.1/460-board_96348gw-10_reset_button.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -335,6 +335,17 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch
deleted file mode 100644
index 8b34520..0000000
--- a/target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2221,7 +2221,7 @@ static void __init nb4_nvram_fixup(void)
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+struct ssb_sprom bcm63xx_sprom = {
- 	.revision		= 0x02,
- 	.board_rev		= 0x17,
- 	.country_code		= 0x0,
-@@ -2241,6 +2241,7 @@ static struct ssb_sprom bcm63xx_sprom =
- 	.boardflags_lo		= 0x2848,
- 	.boardflags_hi		= 0x0000,
- };
-+EXPORT_SYMBOL(bcm63xx_sprom);
- 
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {