summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2014-08-11 20:35:10 +0000
committerLuka Perkov <luka@openwrt.org>2014-08-11 20:35:10 +0000
commitdcacd65281c7c11b82aa095395033a290e89d25e (patch)
tree0d4c0d9e2578c4ae2999a6205b4cb4fd928ccf7f /target/linux
parent9d826428b7c8a8f8167f71f3995bacc5a61efc22 (diff)
downloadmtk-20170518-dcacd65281c7c11b82aa095395033a290e89d25e.zip
mtk-20170518-dcacd65281c7c11b82aa095395033a290e89d25e.tar.gz
mtk-20170518-dcacd65281c7c11b82aa095395033a290e89d25e.tar.bz2
imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
The GW16083 Ethernet Expansion Mezzanine adds the following to supported Gateworks baseboards: * 7-port Ethernet Switch * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module) * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected) This series adds support for a phy driver that adds support for ENET5/ENET6 PHY adding initialization for those PHY's and a polling mechanism that detects SFP insertion and configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42147
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/generic/config-3.141
-rw-r--r--target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c949
-rw-r--r--target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h123
-rw-r--r--target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch129
-rw-r--r--target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch255
-rw-r--r--target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch303
-rw-r--r--target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch27
-rw-r--r--target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch56
-rw-r--r--target/linux/imx6/profiles/120-gateworks.mk2
9 files changed, 1844 insertions, 1 deletions
diff --git a/target/linux/generic/config-3.14 b/target/linux/generic/config-3.14
index 03f72a7..2a66be9 100644
--- a/target/linux/generic/config-3.14
+++ b/target/linux/generic/config-3.14
@@ -907,6 +907,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_EPOLL=y
# CONFIG_EQUALIZER is not set
# CONFIG_ET131X is not set
+# CONFIG_GATEWORKS_GW16083 is not set
# CONFIG_ETH16I is not set
CONFIG_ETHERNET=y
# CONFIG_ETHOC is not set
diff --git a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c
new file mode 100644
index 0000000..66b5536
--- /dev/null
+++ b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c
@@ -0,0 +1,949 @@
+/*
+ * drivers/net/phy/gw16083.c
+ *
+ * Driver for GW16083 Ventana Ethernet Expansion Mezzanine
+ *
+ * Author: Tim Harvey
+ *
+ * Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/*
+ * The GW16083 interfaces with a Ventana baseboard via the PCIe bus, an i2c
+ * bus (i2c2), and a couple of GPIO's. On the PCIe bus is an i210 GigE with
+ * its MAC connected to Port4 of a Marvell MV88E6176 7-port GigE switch via
+ * MDIO and RGMII. Ports 0-3 are standard copper RJ45 but Ports 5 and 6
+ * connect to Marvell MV88E1111 dual-mode Copper/Fiber PHY's over SGMII and
+ * MDIO. The PHY's have both an RG45 for copper and an SFP module.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <linux/of_platform.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+#include "gw16083.h"
+
+#undef FAIL_ON_CHECKSUM_ERR /* fail to configure SFP if checksum bad */
+#define PORT_POWER_CONTROL /* ports can be enabled/disabled via sysfs */
+#define PORT_MODE_CONTROL /* ports 5/6 can have SFP/RJ45 mode forced */
+
+MODULE_DESCRIPTION("GW16083 driver");
+MODULE_AUTHOR("Tim Harvey");
+MODULE_LICENSE("GPL");
+
+struct mv88e1111_port_state {
+ int port;
+ bool present;
+ bool serdes;
+ bool sfp_signal;
+ bool sfp_present;
+ bool sfp_compat;
+ bool sfp_enabled;
+ char sfp_id[64];
+};
+
+struct mv88e1111_priv {
+ struct phy_device *phydev;
+ struct i2c_client *client;
+ struct mv88e1111_port_state port5;
+ struct mv88e1111_port_state port6;
+ struct kobject *sysfs_kobj;
+};
+
+enum {
+ mode_copper = 0,
+ mode_serdes = 1,
+};
+
+static struct i2c_client *gw16083_client = NULL;
+
+static int gw16083_read_port_sfp(struct i2c_client *client,
+ struct mv88e1111_port_state *state);
+
+/* read switch port register from port0-6 */
+u16 read_switch_port(struct phy_device *pdev, int port, u8 regaddr)
+{
+ return pdev->bus->read(pdev->bus, MV_BASE + port, regaddr);
+}
+
+/* write switch port register to port0-6 */
+int write_switch_port(struct phy_device *pdev, int port, u8 regaddr, u16 val)
+{
+ return pdev->bus->write(pdev->bus, MV_BASE + port, regaddr, val);
+}
+
+/*
+ * read_switch_port_phy - write a register for a specific port on 88E6176
+ * The 88E6176 PHY registers must be accessed thorugh the Global2 address
+ * using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
+ */
+int read_switch_port_phy(struct phy_device *pdev, int port, u8 regaddr)
+{
+ u16 reg;
+ int i;
+
+ dev_dbg(&pdev->dev, "read_phy: port%d reg=0x%02x\n", port, regaddr);
+ reg = SMIBUSY | SMIMODE22 | SMIOP_READ;
+ reg |= port << DEVADDR;
+ reg |= regaddr << REGADDR;
+ pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
+ for (i = 0; i < 10; i++) {
+ reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
+ MV_SMI_PHY_COMMAND);
+ if (!(reg & (1<<15)))
+ break;
+ mdelay(1);
+ }
+ /* timeout */
+ if (i == 10)
+ return 0xffff;
+ reg = pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA);
+ return reg;
+}
+
+/*
+ * write_switch_port_phy - write a register for a specific port on 88E6176
+ * The 88E6176 PHY registers must be accessed thorugh the Global2 address
+ * using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
+ */
+int write_switch_port_phy(struct phy_device *pdev, int port, u8 addr, u16 reg)
+{
+ int i;
+
+ dev_dbg(&pdev->dev, "write_phy: port%d reg=0x%02x val=0x%04x\n", port,
+ addr, reg);
+ pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA, reg);
+ reg = SMIBUSY | SMIMODE22 | SMIOP_WRITE;
+ reg |= port << DEVADDR;
+ reg |= addr << REGADDR;
+ pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
+ for (i = 0; i < 10; i++) {
+ reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
+ MV_SMI_PHY_COMMAND);
+ if (!(reg & (1<<15)))
+ break;
+ mdelay(1);
+ }
+ /* timeout */
+ if (i == 10)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+/* read a scratch register from switch */
+inline u8 read_switch_scratch(struct phy_device *pdev, u8 reg)
+{
+ pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC, (reg << 8));
+ return pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC) & 0xff;
+}
+
+/* write a scratch register to switch */
+inline void write_switch_scratch(struct phy_device *pdev, u8 reg, u8 val)
+{
+ pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC,
+ (1 << 15) | (reg << 8) | val);
+}
+
+/* enable or disable an SFP's TXEN signal */
+static int enable_sfp_txen(struct phy_device *pdev, int port, bool enable)
+{
+ u8 gpio;
+ int bit;
+
+ if (port != 5 && port != 6)
+ return -EINVAL;
+
+ /* GPIO[2:1] output low to enable TXEN */
+ bit = (port == 5) ? 1 : 2;
+ gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
+ if (enable)
+ gpio |= (1 << bit);
+ else
+ gpio &= (1 << bit);
+ write_switch_scratch(pdev, MV_GPIO_DATA, gpio);
+ dev_info(&pdev->dev, "Port%d: SFP TX %s\n", port, enable ?
+ "enabled" : "disabled");
+ return 0;
+}
+
+/* configure mv88e1111 port for copper or serdes
+ * For Copper we set auto link/duplex/speed detection
+ * For SerDes/Fiber we force 1000mbps link up and auto-neg duplex
+ */
+static int config_mv88e1111_port_sfp(struct phy_device *pdev, int port,
+ bool sfp)
+{
+ u16 reg;
+
+ if (port != 5 && port != 6)
+ return -EINVAL;
+
+ dev_dbg(&pdev->dev, "%s: Port%d %s\n", __func__, port,
+ sfp ? "SFP" : "copper");
+ if (sfp) {
+ enable_sfp_txen(pdev, port, 1);
+
+ /* configure MV88E6176 Physical Control Port Register */
+ dev_info(&pdev->dev,
+ "Port%d: SFP: force 1000mbps link up "
+ "(auto-negotiate duplex)\n",
+ port);
+ reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
+ reg &= ~0x3f; /* clear 5-0 */
+ reg |= (1 << 4) | (1 << 5); /* force link up */
+ reg |= 2; /* force 1000mbps */
+ write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
+ reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
+ }
+
+ /* copper */
+ else {
+ enable_sfp_txen(pdev, port, 0);
+
+ /* configure MV88E6176 Physical Control Port Register */
+ dev_info(&pdev->dev,
+ "Port%d: Copper: set auto-neg link/duplex/speed\n",
+ port);
+ reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
+ reg &= ~0x3f; /* clear 5-0 */
+ reg |= 3; /* speed not forced */
+ write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
+ reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
+ }
+ dev_dbg(&pdev->dev, "%s: Port%d %s PORT_PHYS_CONTROL=0x%04x\n",
+ __func__, port, sfp ? "SFP" : "copper",
+ read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL));
+
+ return 0;
+}
+
+#if defined(PORT_POWER_CONTROL)
+static int enable_switch_port(struct phy_device *pdev, int port, bool enable)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
+ u16 reg;
+
+ /* power up port */
+ dev_info(&priv->client->dev, "Port%d: %s\n", port,
+ enable ? "normal operation" : "power down");
+ reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL);
+ if (enable)
+ reg &= ~(1 << 11); /* Normal Operation */
+ else
+ reg |= (1 << 11); /* power down */
+ write_switch_port_phy(pdev, port, MV_PHY_CONTROL, reg);
+
+ reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL1);
+ if (enable)
+ reg &= ~(1 << 2); /* Normal Operation */
+ else
+ reg |= (1 << 2); /* power down */
+ write_switch_port_phy(pdev, port, MV_PHY_CONTROL1, reg);
+
+ return 0;
+}
+#endif
+
+/*
+ * Sysfs API
+ */
+
+struct mv88e1111_port_state *get_port_state(struct mv88e1111_priv *priv,
+ int port)
+{
+ if (port == 5)
+ return &priv->port5;
+ if (port == 6)
+ return &priv->port6;
+ return NULL;
+}
+
+/*
+ * get MV88E6176 port number for a specific GW16083 port name
+ * The GW16083 ports as shown on the silkscreen are not mapped according to
+ * the MV88E6176 ports numbers.
+ */
+static int gw16083_get_port(const char* name)
+{
+ int i;
+ int map[] = { 3, 2, 1, 0, 5, 6 };
+
+ if (strncasecmp(name, "ETHERNET", 8) != 0 || strlen(name) != 9)
+ return -1;
+ i = name[8] - '0';
+ if (i < 1 || i > 6)
+ return -1;
+ return map[i-1];
+}
+
+static ssize_t port_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(dev);
+ int port = -1;
+ u16 reg;
+
+ if (sscanf(attr->attr.name, "port%d", &port) != 1)
+ return 0;
+ if (port < 0 || port > 6)
+ return 0;
+ reg = read_switch_port_phy(priv->phydev, port, MV_PHY_CONTROL);
+ return sprintf(buf, "%s\n", (reg & (1 << 11)) ? "disabled" : "enabled");
+}
+
+#if defined(PORT_POWER_CONTROL)
+static ssize_t port_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(dev);
+ int port = -1;
+ int val;
+
+ port = gw16083_get_port(attr->attr.name);
+ if (port < 0)
+ return 0;
+ if (sscanf(buf, "%d", &val) != 1)
+ return 0;
+ enable_switch_port(priv->phydev, port, val ? 1 : 0);
+ return count;
+}
+
+static DEVICE_ATTR(ethernet1, S_IWUSR | S_IRUGO, port_show, port_store);
+static DEVICE_ATTR(ethernet2, S_IWUSR | S_IRUGO, port_show, port_store);
+static DEVICE_ATTR(ethernet3, S_IWUSR | S_IRUGO, port_show, port_store);
+static DEVICE_ATTR(ethernet4, S_IWUSR | S_IRUGO, port_show, port_store);
+static DEVICE_ATTR(ethernet5, S_IWUSR | S_IRUGO, port_show, port_store);
+static DEVICE_ATTR(ethernet6, S_IWUSR | S_IRUGO, port_show, port_store);
+#else
+static DEVICE_ATTR(ethernet1, S_IRUGO, port_show, NULL);
+static DEVICE_ATTR(ethernet2, S_IRUGO, port_show, NULL);
+static DEVICE_ATTR(ethernet3, S_IRUGO, port_show, NULL);
+static DEVICE_ATTR(ethernet4, S_IRUGO, port_show, NULL);
+static DEVICE_ATTR(ethernet5, S_IRUGO, port_show, NULL);
+static DEVICE_ATTR(ethernet6, S_IRUGO, port_show, NULL);
+#endif
+
+static ssize_t portsfp_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(dev);
+ struct mv88e1111_port_state *state;
+
+ state = get_port_state(priv, gw16083_get_port(attr->attr.name));
+ if (!state)
+ return 0;
+
+ if (!state->sfp_present)
+ return 0;
+
+ return sprintf(buf, "%s\n", state->sfp_id);
+}
+
+static ssize_t portmode_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(dev);
+ struct mv88e1111_port_state *state;
+
+ state = get_port_state(priv, gw16083_get_port(attr->attr.name));
+ if (!state)
+ return 0;
+
+ return sprintf(buf, "%s\n", state->serdes ? "SFP" : "RJ45");
+}
+static DEVICE_ATTR(ethernet5_sfp, S_IRUGO, portsfp_show, NULL);
+static DEVICE_ATTR(ethernet6_sfp, S_IRUGO, portsfp_show, NULL);
+
+#ifdef PORT_MODE_CONTROL
+static ssize_t portmode_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(dev);
+ struct mv88e1111_port_state *state;
+ u16 reg;
+ int port;
+
+ port = gw16083_get_port(attr->attr.name);
+ state = get_port_state(priv, port);
+ if (!state)
+ return 0;
+
+ reg = read_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR);
+ if (strcasecmp(buf, "auto") == 0) {
+ reg &= ~(1<<15); /* enable auto-selection */
+ dev_info(&priv->client->dev, "Port%d: enable auto-selection\n",
+ port);
+ } else if (strcasecmp(buf, "RJ45") == 0) {
+ reg |= (1<<15); /* disable auto-selection */
+ reg |= 0xb; /* RGMII to Copper */
+ config_mv88e1111_port_sfp(priv->phydev, port, 0);
+ dev_info(&priv->client->dev, "Port%d: select RJ45\n", port);
+ } else if (strcasecmp(buf, "SFP") == 0) {
+ reg |= (1<<15); /* disable auto-selection */
+ reg |= 0x3; /* RGMII to Fiber */
+ config_mv88e1111_port_sfp(priv->phydev, port, 1);
+ dev_info(&priv->client->dev, "Port%d: select SFP\n", port);
+ }
+ write_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR, reg);
+
+ return count;
+}
+
+static DEVICE_ATTR(ethernet5_mode, S_IWUSR | S_IRUGO, portmode_show,
+ portmode_store);
+static DEVICE_ATTR(ethernet6_mode, S_IWUSR | S_IRUGO, portmode_show,
+ portmode_store);
+#else
+static DEVICE_ATTR(ethernet5_mode, S_IRUGO, portmode_show, NULL);
+static DEVICE_ATTR(ethernet6_mode, S_IRUGO, portmode_show, NULL);
+#endif
+
+
+/*
+ * PHY driver
+ */
+
+static int
+mv88e6176_config_init(struct phy_device *pdev)
+{
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+ pdev->state = PHY_RUNNING;
+
+ return 0;
+}
+
+/* check MV88E1111 PHY status and MV88E6176 GPIO */
+static int
+mv88e6176_read_status(struct phy_device *pdev)
+{
+ struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
+ struct mv88e1111_port_state *state;
+ bool serdes, sfp_present, sfp_signal;
+ int port;
+ int ret = 0;
+ u16 gpio;
+
+ dev_dbg(&pdev->dev, "%s", __func__);
+ gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
+ for (port = 5; port < 7; port++) {
+ serdes = (read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_SR)
+ & (1<<13)) ? 1 : 0;
+ dev_dbg(&pdev->dev, "%s: Port%d GPIO:0x%02x SerDes:%d\n",
+ __func__, port, gpio, serdes);
+ switch(port) {
+ case 5:
+ state = &priv->port5;
+ sfp_present = !((gpio >> 5) & 1);
+ sfp_signal = !((gpio >> 6) & 1);
+ break;
+ case 6:
+ state = &priv->port6;
+ sfp_present = !((gpio >> 3) & 1);
+ sfp_signal = !((gpio >> 4) & 1);
+ break;
+ }
+
+ /*
+ * on sfp_detect read/verify SFP MSA and set sfp_compat
+ * on sfp_signal issue link down?
+ * on serdes auto-select
+ */
+ if (state->sfp_present != sfp_present) {
+ state->sfp_present = sfp_present;
+ dev_info(&pdev->dev, "Port%d: SFP %s\n",
+ port, sfp_present ? "inserted" : "removed");
+ if (state->sfp_present) {
+ if (gw16083_read_port_sfp(priv->client, state))
+ state->sfp_compat = false;
+ else
+ state->sfp_compat = true;
+ } else {
+ state->sfp_compat = false;
+ state->sfp_enabled = false;
+ }
+ }
+ if (state->sfp_signal != sfp_signal) {
+ state->sfp_signal = sfp_signal;
+ dev_info(&pdev->dev, "Port%d: SFP signal %s\n",
+ port, sfp_signal ? "detected" : "lost");
+ }
+ if (state->serdes != serdes) {
+ state->serdes = serdes;
+ dev_info(&pdev->dev, "Port%d: %s auto-selected\n",
+ port, serdes ? "SERDES" : "copper");
+
+ /*
+ * if auto-selection has switched to copper
+ * disable serdes
+ */
+ if (!serdes) {
+ config_mv88e1111_port_sfp(pdev, port, 0);
+ state->sfp_enabled = false;
+ }
+ }
+
+ /*
+ * if serdes and compatible SFP module and not yet enabled
+ * then enable for serdes
+ */
+ if (serdes && state->sfp_compat && state->sfp_signal &&
+ !state->sfp_enabled)
+ {
+ if (!config_mv88e1111_port_sfp(pdev, port, 1))
+ state->sfp_enabled = true;
+ }
+ }
+
+ return ret;
+}
+
+static int
+mv88e6176_config_aneg(struct phy_device *pdev)
+{
+ dev_dbg(&pdev->dev, "%s", __func__);
+ return 0;
+}
+
+static void
+mv88e6176_remove(struct phy_device *pdev)
+{
+ dev_dbg(&pdev->dev, "%s", __func__);
+
+ device_remove_file(&pdev->dev, &dev_attr_ethernet1);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet2);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet3);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet4);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet5);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet6);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet5_sfp);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet6_sfp);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet5_mode);
+ device_remove_file(&pdev->dev, &dev_attr_ethernet6_mode);
+ sysfs_remove_link(kernel_kobj, "gw16083");
+}
+
+static int
+mv88e6176_probe(struct phy_device *pdev)
+{
+ int port;
+ int ret = 0;
+ u32 id, reg;
+ struct mv88e1111_priv *priv;
+
+ dev_dbg(&pdev->dev, "%s: addr=0x%02x bus=%s:%s gw16083_client=%p\n",
+ __func__, pdev->addr, pdev->bus->name, pdev->bus->id,
+ gw16083_client);
+
+ /* In single-chip addressing mode the MV88E6176 shows up on 0x10-0x16 */
+ if (pdev->addr != MV_BASE)
+ return 0;
+
+ /* i2c driver needs to be loaded first */
+ if (!gw16083_client)
+ return 0;
+
+ /* gw16083 has MV88E1676 hanging off of i210 mdio bus */
+ if (strcmp(pdev->bus->name, "igb_enet_mii_bus") != 0)
+ return 0;
+
+ //dev_info(&pdev->dev, "Detected");
+ dev_info(&gw16083_client->dev, "%s: MV88E6176 7-port switch detected",
+ pdev->bus->id);
+
+ /*
+ * port5/6 config: MV88E1111 PHY
+ * Register 20: PHY Control Register
+ * R20_7: add delay to RX_CLK for RXD
+ * R20_1: add delay to TX_CLK for TXD
+ * Register 24: LED Control Register
+ * 0x4111:
+ * Pulse stretch 170 to 340 ms
+ * Register 0: Control Register
+ * R0_15: phy reset
+ */
+ for (port = 5; port < 7; port++) {
+#ifndef RGMII_DELAY_ON_PHY
+ write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, 0xC003);
+#endif
+
+ id = read_switch_port_phy(pdev, port,
+ MII_M1111_PHY_IDENT0) << 16;
+ id |= read_switch_port_phy(pdev, port, MII_M1111_PHY_IDENT1);
+ if ((id & MII_M1111_PHY_ID_MASK) != MII_M1111_PHY_ID) {
+ dev_err(&gw16083_client->dev,
+ "Port%d: No MV88E1111 PHY detected", port);
+ return 0;
+ //continue;
+ }
+
+#ifdef RGMII_DELAY_ON_PHY
+ /* phy rx/tx delay */
+ reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR);
+ reg |= (1<<1) | (1<<7);
+ write_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR, reg);
+#endif
+ /* led config */
+ write_switch_port_phy(pdev, port, MII_M1111_PHY_LED_CONTROL,
+ MII_M1111_PHY_LED_PULSE_STR);
+ /* reset phy */
+ reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL);
+ reg |= MII_M1111_PHY_CONTROL_RESET;
+ write_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL, reg);
+ dev_info(&gw16083_client->dev,
+ "Port%d MV88E111 PHY configured\n", port);
+ }
+
+ /*
+ * GPIO Configuration:
+ * GPIO1: FIB5_TXEN# (output)
+ * GPIO2: FIB6_TXEN# (output)
+ * GPIO3: FIB6_PRES# (input)
+ * GPIO4: FIB6_LOS (input)
+ * GPIO5: FIB5_PRES# (input)
+ * GPIO6: FIB5_LOS (input)
+ */
+ write_switch_scratch(pdev, MV_GPIO_DATA, 0x06); /* GPIO[2:1] out hi */
+ write_switch_scratch(pdev, MV_GPIO_DIR, 0x78); /* GPIO[6:3] inp */
+
+ pdev->irq = PHY_POLL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ memset(priv, 0, sizeof(*priv));
+ priv->phydev = pdev;
+ priv->client = gw16083_client;
+ priv->port5.port = 5;
+ priv->port6.port = 6;
+ dev_set_drvdata(&pdev->dev, priv);
+
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet1);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet2);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet3);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet4);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_sfp);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_sfp);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_mode);
+ ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_mode);
+
+ if (unlikely(ret))
+ dev_err(&pdev->dev, "Failed creating attrs\n");
+
+ /* Add a nice symlink to the real device */
+ ret = sysfs_create_link(kernel_kobj, &pdev->dev.kobj, "gw16083");
+
+ dev_dbg(&pdev->dev, "initial state: GPIO=0x%02x "
+ "Port5_serdes=%d Port6_serdes=%d\n",
+ read_switch_scratch(pdev, MV_GPIO_DATA),
+ (read_switch_port_phy(pdev, 5, MII_M1111_PHY_EXT_SR)
+ & (1<<13) ? 1:0),
+ (read_switch_port_phy(pdev, 6, MII_M1111_PHY_EXT_SR)
+ & (1<<13) ? 1:0));
+
+ return ret;
+}
+
+static struct phy_driver mv88e6176_phy_driver = {
+ .name = "MV88E6176",
+ .phy_id = MV_IDENT_VALUE,
+ .phy_id_mask = MV_IDENT_MASK,
+ .features = PHY_BASIC_FEATURES,
+ .probe = &mv88e6176_probe,
+ .remove = &mv88e6176_remove,
+ .config_init = &mv88e6176_config_init,
+ .config_aneg = &mv88e6176_config_aneg,
+ .read_status = &mv88e6176_read_status,
+ .driver = { .owner = THIS_MODULE },
+};
+
+/*
+ * I2C driver
+ */
+
+/* See SFF-8472 */
+struct sfp_msa {
+ /* Basic ID fields */
+ u8 identifier;
+ u8 ext_identifier;
+ u8 connector;
+ u8 transceiver[8];
+ u8 encoding;
+ u8 br_nominal;
+ u8 rate_identifier;
+ u8 length_smf_km;
+ u8 length_smf;
+ u8 length_om2;
+ u8 length_om1;
+ u8 length_om4;
+ u8 length_om3;
+ u8 vendor_name[16];
+ u8 transceiver2;
+ u8 vendor_oui[3];
+ u8 vendor_pn[16];
+ u8 vendor_rev[4];
+ u8 wavelength[2];
+ u8 resv1;
+ u8 cc_base;
+
+ /* extended id fields */
+ u8 options[2];
+ u8 br_max;
+ u8 br_min;
+ u8 vendor_sn[16];
+ u8 date_code[8];
+ u8 diags_type;
+ u8 enhanced_options;
+ u8 sff8472_compliance;
+ u8 cc_ext;
+
+ /* Vendor specific ID fields */
+ u8 vendor_data[32];
+ u8 sff8079[128];
+};
+
+enum identifier {
+ UNKNOWN,
+ GBIC,
+ SFF,
+ SFP,
+ XBI,
+ XENPACK,
+ XFP,
+ XFF,
+ XFP_E,
+ XPAK,
+ X2,
+ DWDM_SFP,
+ QSFP,
+ MAX_ID,
+};
+
+const char* id_names[] = {
+ "UNKONWN",
+ "GBIC",
+ "SFF",
+ "SFP",
+ NULL,
+};
+
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct sfp_flags {
+ u8 e1000_base_sx:1;
+ u8 e1000_base_lx:1;
+ u8 e1000_base_cx:1;
+ u8 e1000_base_t:1;
+ u8 e100_base_lx:1;
+ u8 e100_base_fx:1;
+ u8 e10_base_bx10:1;
+ u8 e10_base_px:1;
+};
+
+#define STRING_APPEND(str, src) \
+ strncat(str, src, sizeof(src)); \
+ for (i = 1; i < sizeof(str); i++) \
+ if (str[i-1] == ' ' && str[i] == ' ') \
+ str[i] = 0;
+
+static int gw16083_read_port_sfp(struct i2c_client *client,
+ struct mv88e1111_port_state *state)
+{
+ int ret = 0;
+ u8 data[256];
+ struct sfp_flags *eth_flags;
+ u8 crc;
+ int i;
+ u8 *str;
+ struct sfp_msa *sfp_msa = (struct sfp_msa *)data;
+ int port = state->port;
+ union i2c_smbus_data d;
+
+ dev_dbg(&client->dev, "%s Port%d\n", __func__, port);
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ return -ENODEV;
+ d.byte = (port == 5) ? 1 : 2;
+ if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_PCA9543,
+ client->flags, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_BYTE_DATA, &d) < 0)
+ {
+ dev_err(&client->dev,
+ "Port%d: failed writing PCA9543 register\n", port);
+ return ret;
+ }
+
+ /* read all 256 bytes of SFP EEPROM */
+ for (i = 0; i < sizeof(data); i += I2C_SMBUS_BLOCK_MAX) {
+ d.block[0] = I2C_SMBUS_BLOCK_MAX;
+ if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_SFP1,
+ client->flags, I2C_SMBUS_READ, i,
+ I2C_SMBUS_I2C_BLOCK_DATA, &d) < 0)
+ {
+ dev_err(&client->dev,
+ "Port%d: failed reading SFP data\n", port);
+ return ret;
+ }
+ memcpy(data + i, d.block + 1, I2C_SMBUS_BLOCK_MAX);
+ }
+
+ /* Validate checksums */
+ for (crc = 0, i = 0; i < 63; i++)
+ crc += data[i];
+ if (crc != sfp_msa->cc_base) {
+ dev_err(&client->dev, "Port%d: "
+ "Checksum failure for Base ID fields: 0x%02x\n", port,
+ crc);
+#ifdef FAIL_ON_CHECKSUM_ERR
+ return -EINVAL;
+#endif
+ }
+ for (crc = 0, i = 64; i < 95; i++)
+ crc += data[i];
+ if (crc != sfp_msa->cc_ext) {
+ dev_err(&client->dev, "Port%d: "
+ "Checksum failure for Extended ID fields: 0x%02x\n",
+ port, crc);
+#ifdef FAIL_ON_CHECKSUM_ERR
+ return -EINVAL;
+#endif
+ }
+ state->sfp_id[0] = 0;
+ for (i = 0; id_names[i]; i++) {
+ if (sfp_msa->identifier == i) {
+ sprintf(state->sfp_id, "%s: ", id_names[i]);
+ break;
+ }
+ }
+ STRING_APPEND(state->sfp_id, sfp_msa->vendor_oui);
+ STRING_APPEND(state->sfp_id, sfp_msa->vendor_name);
+ STRING_APPEND(state->sfp_id, sfp_msa->vendor_pn);
+ STRING_APPEND(state->sfp_id, sfp_msa->vendor_rev);
+ STRING_APPEND(state->sfp_id, sfp_msa->vendor_sn);
+ dev_info(&client->dev, "Port%d: %s\n", port, state->sfp_id);
+
+ if ((sfp_msa->identifier != GBIC) &&
+ (sfp_msa->identifier != SFF) &&
+ (sfp_msa->identifier != SFP))
+ {
+ dev_err(&client->dev, "Port%d: Unknown module identifier: %d\n",
+ port, sfp_msa->identifier);
+ return -EINVAL;
+ }
+
+ str = "";
+ eth_flags = (struct sfp_flags *)(sfp_msa->transceiver + 3);
+ if (eth_flags->e1000_base_sx) {
+ str = "1000Base-SX (Fiber)";
+ } else if (eth_flags->e1000_base_lx) {
+ str = "1000Base-LX (Fiber)";
+ } else if (eth_flags->e1000_base_t) {
+ str = "1000Base-T (Copper)";
+ } else if (eth_flags->e100_base_fx) {
+ str = "100Base-FX (Fiber) - not supported";
+ ret = -EINVAL;
+ } else {
+ str = "Unknown/Unsupported media type";
+ ret = -EINVAL;
+ }
+ if (ret)
+ dev_err(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
+ sfp_msa->transceiver[3]);
+ else
+ dev_info(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
+ sfp_msa->transceiver[3]);
+
+ return ret;
+}
+
+static int gw16083_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+
+ dev_info(&client->dev, "GW16083 Ethernet Expansion Mezzanine\n");
+ if (gw16083_client) {
+ dev_err(&client->dev, "client already registered\n");
+ return -EINVAL;
+ }
+ gw16083_client = client;
+
+ ret = phy_driver_register(&mv88e6176_phy_driver);
+ if (ret)
+ dev_err(&client->dev,
+ "failed to register mv88e6176 phy driver: %d\n", ret);
+ return ret;
+}
+
+static int gw16083_remove(struct i2c_client *client)
+{
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ phy_driver_unregister(&mv88e6176_phy_driver);
+ gw16083_client = NULL;
+ return 0;
+}
+
+static const struct of_device_id gw16083_dt_ids[] = {
+ { .compatible = "gateworks,gw16083", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, gw16083_dt_ids);
+
+static const struct i2c_device_id gw16083_id[] = {
+ { "gw16083", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gw16083_id);
+
+static struct i2c_driver gw16083_driver = {
+ .driver = {
+ .name = "gw16083",
+ .of_match_table = gw16083_dt_ids,
+ },
+ .probe = gw16083_probe,
+ .remove = gw16083_remove,
+ .id_table = gw16083_id,
+};
+
+static int __init mv88e6176_init(void)
+{
+ return i2c_add_driver(&gw16083_driver);
+}
+
+static void __exit mv88e6176_exit(void)
+{
+ i2c_del_driver(&gw16083_driver);
+}
+
+module_init(mv88e6176_init);
+module_exit(mv88e6176_exit);
diff --git a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h
new file mode 100644
index 0000000..db96f2b
--- /dev/null
+++ b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h
@@ -0,0 +1,123 @@
+/*
+ * drivers/net/phy/mv88e6176.h
+ *
+ * Driver for Marvell Switch
+ *
+ * Author: Tim Harvey
+ *
+ * Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _GW16083_H_
+#define _GW16083_H_
+
+#define MII_MARVELL_PHY_PAGE 22
+
+/*
+ * I2C Addresses
+ */
+#define GW16083_I2C_ADDR_SFP1 0x50
+#define GW16083_I2C_ADDR_SFP2 0x51
+#define GW16083_I2C_ADDR_EEPROM 0x52
+#define GW16083_I2C_ADDR_PCA9543 0x70
+
+/*
+ * MV88E1111 PHY Registers
+ */
+enum {
+ MII_M1111_PHY_CONTROL = 0,
+ MII_M1111_PHY_STATUS = 1,
+ MII_M1111_PHY_IDENT0 = 2,
+ MII_M1111_PHY_IDENT1 = 3,
+ MII_M1111_PHY_EXT_CR = 20,
+ MII_M1111_PHY_LED_CONTROL = 24,
+ MII_M1111_PHY_EXT_SR = 27,
+};
+
+#define MII_M1111_PHY_ID_MASK 0xfffffff0
+#define MII_M1111_PHY_ID 0x01410cc0
+
+#define MII_M1111_PHY_CONTROL_RESET (1 << 15)
+#define MII_M1111_PHY_LED_DIRECT 0x4100
+#define MII_M1111_PHY_LED_PULSE_STR 0x4111
+#define MII_M1111_PHY_LED_COMBINE 0x411c
+#define MII_M1111_RX_DELAY 0x80
+#define MII_M1111_TX_DELAY 0x2
+
+/*
+ * MV88E6176 Switch Registers
+ */
+
+/* PHY Addrs */
+#define MV_BASE 0x10
+#define MV_GLOBAL1 0x1b
+#define MV_GLOBAL2 0x1c
+#define MV_GLOBAL3 0x1d
+
+/* Global2 Registers */
+enum {
+ MV_SMI_PHY_COMMAND = 0x18,
+ MV_SMI_PHY_DATA = 0x19,
+ MV_SCRATCH_MISC = 0x1A,
+};
+
+/* Scratch And Misc Reg offsets */
+enum {
+ MV_GPIO_MODE = 0x60,
+ MV_GPIO_DIR = 0x62,
+ MV_GPIO_DATA = 0x64,
+ MV_GPIO76_CNTL = 0x6B,
+ MV_GPIO54_CNTL = 0x6A,
+ MV_GPIO32_CNTL = 0x69,
+ MV_GPIO10_CNTL = 0x68,
+ MV_CONFIG0 = 0x70,
+ MV_CONFIG1 = 0x71,
+ MV_CONFIG2 = 0x72,
+ MV_CONFIG3 = 0x73,
+};
+
+/* PHY Registers */
+enum {
+ MV_PHY_CONTROL = 0x00,
+ MV_PHY_STATUS = 0x01,
+ MV_PHY_IDENT0 = 0x02,
+ MV_PHY_IDENT1 = 0x03,
+ MV_PHY_ANEG = 0x04,
+ MV_PHY_LINK_ABILITY = 0x05,
+ MV_PHY_ANEG_EXPAND = 0x06,
+ MV_PHY_XMIT_NEXTP = 0x07,
+ MV_PHY_LINK_NEXTP = 0x08,
+ MV_PHY_CONTROL1 = 0x10,
+ MV_PHY_STATUS1 = 0x11,
+ MV_PHY_INTR_EN = 0x12,
+};
+
+/* Port Registers */
+enum {
+ MV_PORT_STATUS = 0x00,
+ MV_PORT_PHYS_CONTROL = 0x01,
+ MV_PORT_IDENT = 0x03,
+ MV_PORT_CONTROL = 0x04,
+ MV_PORT_VLANMAP = 0x06,
+ MV_PORT_ASSOC = 0x0b,
+ MV_PORT_RXCOUNT = 0x10,
+ MV_PORT_TXCOUNT = 0x11,
+};
+
+#define SMIBUSY (1<<15)
+#define SMIMODE22 (1<<12)
+#define SMIOP_READ (2<<10)
+#define SMIOP_WRITE (1<<10)
+#define DEVADDR 5
+#define REGADDR 0
+
+#define MV_IDENT_MASK 0x0000fff0
+#define MV_IDENT_VALUE 0x00001760
+
+#endif /* _GW16083_H_ */
diff --git a/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
new file mode 100644
index 0000000..9de5dfe
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
@@ -0,0 +1,129 @@
+Author: Tim Harvey <tharvey@gateworks.com>
+Date: Thu May 15 00:12:26 2014 -0700
+
+ net: igb: add i210/i211 support for phy read/write
+
+ The i210/i211 uses the MDICNFG register for the phy address instead of the
+ MDIC register.
+
+ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -139,7 +139,7 @@ out:
+ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+ {
+ struct e1000_phy_info *phy = &hw->phy;
+- u32 i, mdic = 0;
++ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -152,11 +152,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
+- (E1000_MDIC_OP_READ));
++ switch (hw->mac.type) {
++ case e1000_i210:
++ case e1000_i211:
++ mdicnfg = rd32(E1000_MDICNFG);
++ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ wr32(E1000_MDICNFG, mdicnfg);
++ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++ (E1000_MDIC_OP_READ));
++ break;
++ default:
++ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++ (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (E1000_MDIC_OP_READ));
++ break;
++ }
+
+ wr32(E1000_MDIC, mdic);
++ wrfl();
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+@@ -181,6 +195,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ *data = (u16) mdic;
+
+ out:
++ switch (hw->mac.type) {
++ /* restore MDICNFG to have phy's addr */
++ case e1000_i210:
++ case e1000_i211:
++ mdicnfg = rd32(E1000_MDICNFG);
++ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++ wr32(E1000_MDICNFG, mdicnfg);
++ break;
++ default:
++ break;
++ }
+ return ret_val;
+ }
+
+@@ -195,7 +221,7 @@ out:
+ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+ {
+ struct e1000_phy_info *phy = &hw->phy;
+- u32 i, mdic = 0;
++ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -208,12 +234,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+- mdic = (((u32)data) |
+- (offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
+- (E1000_MDIC_OP_WRITE));
++ switch (hw->mac.type) {
++ case e1000_i210:
++ case e1000_i211:
++ mdicnfg = rd32(E1000_MDICNFG);
++ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ wr32(E1000_MDICNFG, mdicnfg);
++ mdic = (((u32)data) |
++ (offset << E1000_MDIC_REG_SHIFT) |
++ (E1000_MDIC_OP_WRITE));
++ break;
++ default:
++ mdic = (((u32)data) |
++ (offset << E1000_MDIC_REG_SHIFT) |
++ (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (E1000_MDIC_OP_WRITE));
++ break;
++ }
+
+ wr32(E1000_MDIC, mdic);
++ wrfl();
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+@@ -237,6 +278,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ }
+
+ out:
++ switch (hw->mac.type) {
++ /* restore MDICNFG to have phy's addr */
++ case e1000_i210:
++ case e1000_i211:
++ mdicnfg = rd32(E1000_MDICNFG);
++ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++ wr32(E1000_MDICNFG, mdicnfg);
++ break;
++ default:
++ break;
++ }
+ return ret_val;
+ }
+
diff --git a/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
new file mode 100644
index 0000000..b6688db
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
@@ -0,0 +1,255 @@
+Author: Tim Harvey <tharvey@gateworks.com>
+Date: Thu May 15 00:29:18 2014 -0700
+
+ net: igb: add phy read/write functions that accept phy addr
+
+ Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
+ The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
+ to this function.
+
+ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -2142,7 +2142,7 @@ static s32 igb_read_phy_reg_82580(struct
+ if (ret_val)
+ goto out;
+
+- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -2167,7 +2167,7 @@ static s32 igb_write_phy_reg_82580(struc
+ if (ret_val)
+ goto out;
+
+- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+
+ hw->phy.ops.release(hw);
+
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -136,9 +136,8 @@ out:
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+- struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+@@ -157,14 +156,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ default:
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ }
+@@ -218,9 +217,8 @@ out:
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+- struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdicnfg, mdic = 0;
+ s32 ret_val = 0;
+
+@@ -239,7 +237,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+@@ -248,7 +246,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+ default:
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+- (phy->addr << E1000_MDIC_PHY_SHIFT) |
++ (addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+ break;
+ }
+@@ -539,7 +537,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+- ret_val = igb_write_phy_reg_mdic(hw,
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+@@ -548,8 +546,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+ }
+ }
+
+- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+- data);
++ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
++ MAX_PHY_REG_ADDRESS & offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -578,7 +576,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+- ret_val = igb_write_phy_reg_mdic(hw,
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+@@ -587,8 +585,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+ }
+ }
+
+- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+- data);
++ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
++ MAX_PHY_REG_ADDRESS & offset, data);
+
+ hw->phy.ops.release(hw);
+
+@@ -2554,8 +2552,9 @@ out:
+ }
+
+ /**
+- * igb_write_phy_reg_gs40g - Write GS40G PHY register
++ * igb_write_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
++ * @addr: phy address to write to
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+@@ -2563,7 +2562,7 @@ out:
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2573,10 +2572,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
+ if (ret_val)
+ return ret_val;
+
+- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
+
+ release:
+ hw->phy.ops.release(hw);
+@@ -2584,8 +2583,24 @@ release:
+ }
+
+ /**
+- * igb_read_phy_reg_gs40g - Read GS40G PHY register
++ * igb_write_phy_reg_gs40g - Write GS40G PHY register
++ * @hw: pointer to the HW structure
++ * @offset: lower half is register offset to write to
++ * upper half is page to use.
++ * @data: data to write at register offset
++ *
++ * Acquires semaphore, if necessary, then writes the data to PHY register
++ * at the offset. Release any acquired semaphores before exiting.
++ **/
++s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++{
++ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
++ * igb_read_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
++ * @addr: phy address to read from
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+@@ -2593,7 +2608,7 @@ release:
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2603,10 +2618,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
+ if (ret_val)
+ return ret_val;
+
+- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
+
+ release:
+ hw->phy.ops.release(hw);
+@@ -2614,6 +2629,21 @@ release:
+ }
+
+ /**
++ * igb_read_phy_reg_gs40g - Read GS40G PHY register
++ * @hw: pointer to the HW structure
++ * @offset: lower half is register offset to read to
++ * upper half is page to use.
++ * @data: data to read at register offset
++ *
++ * Acquires semaphore, if necessary, then reads the data in the PHY register
++ * at the offset. Release any acquired semaphores before exiting.
++ **/
++s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
+@@ -65,8 +65,8 @@ s32 igb_phy_has_link(struct e1000_hw *h
+ void igb_power_up_phy_copper(struct e1000_hw *hw);
+ void igb_power_down_phy_copper(struct e1000_hw *hw);
+ s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+ s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+@@ -77,6 +77,8 @@ s32 igb_phy_force_speed_duplex_82580(st
+ s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+ s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32 igb_check_polarity_m88(struct e1000_hw *hw);
+
+ /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
new file mode 100644
index 0000000..1b458f7
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
@@ -0,0 +1,303 @@
+Author: Tim Harvey <tharvey@gateworks.com>
+Date: Thu May 15 12:36:23 2014 -0700
+
+ net: igb: register mii_bus for SerDes w/ external phy
+
+ If an i210 is configured for 1000BASE-BX link_mode and has an external phy
+ specified, then register an mii bus using the external phy address as
+ a mask.
+
+ An i210 hooked to an external standard phy will be configured with a link_mo
+ of SGMII in which case phy ops will be configured and used internall in the
+ igb driver for link status. However, in certain cases one might be using a
+ backplane SerDes connection to something that talks on the mdio bus but is
+ not a standard phy, such as a switch. In this case by registering an mdio
+ bus a phy driver can manage the device.
+
+ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -606,13 +606,25 @@ static s32 igb_get_invariants_82575(stru
+ switch (link_mode) {
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
++ if (igb_sgmii_uses_mdio_82575(hw)) {
++ u32 mdicnfg = rd32(E1000_MDICNFG);
++ mdicnfg &= E1000_MDICNFG_PHY_MASK;
++ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
++ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
++ hw->phy.addr);
++ } else {
++ hw_dbg("1000BASE_KX");
++ }
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* Get phy control interface type set (MDIO vs. I2C)*/
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
++ hw_dbg("SGMII with external MDIO PHY");
+ break;
++ } else {
++ hw_dbg("SGMII with external I2C PHY");
+ }
+ /* fall through for I2C based SGMII */
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+@@ -629,8 +641,11 @@ static s32 igb_get_invariants_82575(stru
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
+ }
++ hw_dbg("SERDES with external SFP");
+
+ break;
++ } else {
++ hw_dbg("SERDES");
+ }
+
+ /* do not change link mode for 100BaseFX */
+--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
++++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
+@@ -32,6 +32,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/netdevice.h>
++#include <linux/phy.h>
+
+ #include "e1000_regs.h"
+ #include "e1000_defines.h"
+@@ -553,6 +554,12 @@ struct e1000_hw {
+ struct e1000_mbx_info mbx;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
++#ifdef CONFIG_PHYLIB
++ /* Phylib and MDIO interface */
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++ phy_interface_t phy_interface;
++#endif
+ union {
+ struct e1000_dev_spec_82575 _82575;
+ } dev_spec;
+--- a/drivers/net/ethernet/intel/igb/igb_main.c
++++ b/drivers/net/ethernet/intel/igb/igb_main.c
+@@ -45,6 +45,7 @@
+ #include <linux/if_vlan.h>
+ #include <linux/pci.h>
+ #include <linux/pci-aspm.h>
++#include <linux/phy.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/ip.h>
+@@ -2183,6 +2184,126 @@ static s32 igb_init_i2c(struct igb_adapt
+ return status;
+ }
+
++
++#ifdef CONFIG_PHYLIB
++/*
++ * MMIO/PHYdev support
++ */
++
++static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++ struct e1000_hw *hw = bus->priv;
++ u16 out;
++ int err;
++
++ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
++ if (err)
++ return err;
++ return out;
++}
++
++static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++ u16 val)
++{
++ struct e1000_hw *hw = bus->priv;
++
++ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
++}
++
++static int igb_enet_mdio_reset(struct mii_bus *bus)
++{
++ udelay(300);
++ return 0;
++}
++
++static void igb_enet_mii_link(struct net_device *netdev)
++{
++}
++
++/* Probe the mdio bus for phys and connect them */
++static int igb_enet_mii_probe(struct net_device *netdev)
++{
++ struct igb_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++ struct phy_device *phy_dev = NULL;
++ int phy_id;
++
++ /* check for attached phy */
++ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
++ if (hw->mii_bus->phy_map[phy_id]) {
++ phy_dev = hw->mii_bus->phy_map[phy_id];
++ break;
++ }
++ }
++ if (!phy_dev) {
++ netdev_err(netdev, "no PHY found\n");
++ return -ENODEV;
++ }
++
++ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
++ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
++ igb_enet_mii_link, hw->phy_interface);
++ if (IS_ERR(phy_dev)) {
++ netdev_err(netdev, "could not attach to PHY\n");
++ return PTR_ERR(phy_dev);
++ }
++
++ hw->phy_dev = phy_dev;
++ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
++ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
++
++ return 0;
++}
++
++/* Create and register mdio bus */
++static int igb_enet_mii_init(struct pci_dev *pdev)
++{
++ struct mii_bus *mii_bus;
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct igb_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++ int err;
++
++ mii_bus = mdiobus_alloc();
++ if (mii_bus == NULL) {
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ mii_bus->name = "igb_enet_mii_bus";
++ mii_bus->read = igb_enet_mdio_read;
++ mii_bus->write = igb_enet_mdio_write;
++ mii_bus->reset = igb_enet_mdio_reset;
++ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
++ pci_name(pdev), hw->device_id + 1);
++ mii_bus->priv = hw;
++ mii_bus->parent = &pdev->dev;
++ mii_bus->phy_mask = ~(1 << hw->phy.addr);
++
++ err = mdiobus_register(mii_bus);
++ if (err) {
++ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
++ goto err_out_free_mdiobus;
++ }
++ hw->mii_bus = mii_bus;
++
++ return 0;
++
++err_out_free_mdiobus:
++ mdiobus_free(mii_bus);
++err_out:
++ return err;
++}
++
++static void igb_enet_mii_remove(struct e1000_hw *hw)
++{
++ if (hw->mii_bus) {
++ mdiobus_unregister(hw->mii_bus);
++ mdiobus_free(hw->mii_bus);
++ }
++}
++#endif /* CONFIG_PHYLIB */
++
+ /**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+@@ -2585,6 +2706,13 @@ static int igb_probe(struct pci_dev *pde
+ }
+
+ pm_runtime_put_noidle(&pdev->dev);
++
++#ifdef CONFIG_PHYLIB
++ /* create and register the mdio bus if using ext phy */
++ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++ igb_enet_mii_init(pdev);
++#endif
++
+ return 0;
+
+ err_register:
+@@ -2728,6 +2856,10 @@ static void igb_remove(struct pci_dev *p
+ struct e1000_hw *hw = &adapter->hw;
+
+ pm_runtime_get_noresume(&pdev->dev);
++#ifdef CONFIG_PHYLIB
++ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++ igb_enet_mii_remove(hw);
++#endif
+ #ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+ #endif
+@@ -3032,6 +3164,12 @@ static int __igb_open(struct net_device
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
++#ifdef CONFIG_PHYLIB
++ /* Probe and connect to PHY if using ext phy */
++ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++ igb_enet_mii_probe(netdev);
++#endif
++
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+@@ -7087,21 +7225,41 @@ void igb_alloc_rx_buffers(struct igb_rin
+ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+ {
+ struct igb_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+- if (adapter->hw.phy.media_type != e1000_media_type_copper)
++ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
++ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+- data->phy_id = adapter->hw.phy.addr;
++ data->phy_id = hw->phy.addr;
+ break;
+ case SIOCGMIIREG:
+- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+- &data->val_out))
+- return -EIO;
++ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++ if (igb_read_reg_gs40g(hw, data->phy_id,
++ data->reg_num & 0x1F,
++ &data->val_out))
++ return -EIO;
++ } else {
++ if (igb_read_phy_reg(hw, data->reg_num & 0x1F,
++ &data->val_out))
++ return -EIO;
++ }
+ break;
+ case SIOCSMIIREG:
++ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++ if (igb_write_reg_gs40g(hw, data->phy_id,
++ data->reg_num & 0x1F,
++ data->val_in))
++ return -EIO;
++ } else {
++ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
++ data->val_in))
++ return -EIO;
++ }
++ break;
+ default:
+ return -EOPNOTSUPP;
+ }
diff --git a/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
new file mode 100644
index 0000000..f1d76a1
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
@@ -0,0 +1,27 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -270,6 +270,14 @@ endif # RTL8366_SMI
+
+ source "drivers/net/phy/b53/Kconfig"
+
++config GATEWORKS_GW16083
++ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
++ ---help---
++ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
++ Gateworks Ventana baseboard and provides a 7-port GbE managed
++ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
++ ports"
++
+ endif # PHYLIB
+
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -39,6 +39,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
+ obj-$(CONFIG_DP83640_PHY) += dp83640.o
+ obj-$(CONFIG_STE10XP) += ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
++obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
+ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY) += at803x.o
diff --git a/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
new file mode 100644
index 0000000..cc5f920
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
@@ -0,0 +1,56 @@
+--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+@@ -201,6 +201,11 @@
+ };
+ };
+ };
++
++ gw16083: gw16083@52 {
++ compatible = "gateworks,gw16083";
++ reg = <0x52>;
++ };
+ };
+
+ &i2c3 {
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+@@ -268,6 +268,11 @@
+ };
+ };
+ };
++
++ gw16083: gw16083@52 {
++ compatible = "gateworks,gw16083";
++ reg = <0x52>;
++ };
+ };
+
+ &i2c3 {
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+@@ -289,6 +289,11 @@
+ };
+ };
+ };
++
++ gw16083: gw16083@52 {
++ compatible = "gateworks,gw16083";
++ reg = <0x52>;
++ };
+ };
+
+ &i2c3 {
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+@@ -317,6 +317,11 @@
+ compatible = "sil,si52147";
+ reg = <0x6b>;
+ };
++
++ gw16083: gw16083@52 {
++ compatible = "gateworks,gw16083";
++ reg = <0x52>;
++ };
+ };
+
+ &i2c3 {
diff --git a/target/linux/imx6/profiles/120-gateworks.mk b/target/linux/imx6/profiles/120-gateworks.mk
index d64a0bd..39c4663 100644
--- a/target/linux/imx6/profiles/120-gateworks.mk
+++ b/target/linux/imx6/profiles/120-gateworks.mk
@@ -12,7 +12,7 @@ define Profile/VENTANA
kmod-sound-core kmod-sound-soc-imx kmod-sound-soc-imx-sgtl5000 \
kmod-can kmod-can-flexcan kmod-can-raw \
kmod-rtc-ds1672 kmod-gpio-pca953x kmod-hwmon-gsc kmod-eeprom-at24 \
- kmod-leds-gpio kmod-pps-gpio \
+ kmod-leds-gpio kmod-pps-gpio kmod-gw16083 \
kobs-ng
endef