ramips: add Poray M4 4M/8M support

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637

9 files changed, 222 insertions, 2 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a68538b..57c8beb 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
 	m3)
 		status_led="m3:blue:status"
 		;;
+	m4)
+		status_led="m4:blue:status"
+		;;
 	mofi3500-3gn)
 		status_led="mofi3500-3gn:green:status"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 307330b..133c2de 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -226,7 +226,8 @@ ramips_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
 
-	m3)
+	m3 |\
+	m4)
 		lan_mac=$(mtd_get_mac_binary factory 4)
 		lan_mac=$(macaddr_add "$lan_mac" -1)
 		;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 86c19b0..f9aabd5 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -75,7 +75,8 @@ preinit_set_mac_address() {
 		mac=$(mtd_get_mac_binary factory 40)
 		ifconfig eth0 hw ether $mac 2>/dev/null
 		;;
-	m3)
+	m3 |\
+	m4)
 		mac=$(mtd_get_mac_binary factory 4)
 		mac=$(macaddr_add "$mac" -1)
 		ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 7afa707..e3776f1 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -151,6 +151,9 @@ ramips_board_detect() {
 	*"Poray M3")
 		name="m3"
 		;;
+	*"Poray M4")
+		name="m4"
+		;;
 	*"PWH2004")
 		name="pwh2004"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 4ac86e9..5e1a7a5 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -45,6 +45,7 @@ platform_check_image() {
 	hw550-3g | \
 	hg255d | \
 	m3 | \
+	m4 | \
 	mofi3500-3gn | \
 	mpr-a1 | \
 	mpr-a2 | \
diff --git a/target/linux/ramips/dts/M4-4M.dts b/target/linux/ramips/dts/M4-4M.dts
new file mode 100644
index 0000000..86bd832
--- /dev/null
+++ b/target/linux/ramips/dts/M4-4M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "M4", "ralink,rt5350-soc";
+	model = "Poray M4";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "pm25lq032";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "pm25lq032";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <1>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status {
+			label = "m4:blue:status";
+			gpios = <&gpio0 9 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+		ralink,mtd-eeprom = <&factory 0>;
+		ralink,led-polarity = <1>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/dts/M4-8M.dts b/target/linux/ramips/dts/M4-8M.dts
new file mode 100644
index 0000000..d07eb49
--- /dev/null
+++ b/target/linux/ramips/dts/M4-8M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "M4", "ralink,rt5350-soc";
+	model = "Poray M4";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "gd25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "gd25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <1>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status {
+			label = "m4:blue:status";
+			gpios = <&gpio0 9 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+		ralink,mtd-eeprom = <&factory 0>;
+		ralink,led-polarity = <1>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b626bec..68343e3 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -376,6 +376,8 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest
 
 Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
 
+Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
+
 Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
 
 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
@@ -511,6 +513,7 @@ define Image/Build/Profile/Default
 #	$(call Image/Build/Profile/HG255D,$(1))
 	$(call Image/Build/Profile/HW550-3G,$(1))
 	$(call Image/Build/Profile/M3,$(1))
+	$(call Image/Build/Profile/M4,$(1))
 	$(call Image/Build/Profile/MOFI3500-3GN,$(1))
 	$(call Image/Build/Profile/MPRA2,$(1))
 	$(call Image/Build/Profile/MZKW300NH2,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk
index 972d7fd..10cf37f 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -15,3 +15,13 @@ define Profile/M3/Description
 endef
 
 $(eval $(call Profile,M3))
+
+define Profile/M4
+	NAME:=Poray M4
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
+endef
+define Profile/M4/Description
+	Package set for Poray M4 board
+endef
+
+$(eval $(call Profile,M4))