switch driver cleanup, 1st phase

SVN-Revision: 9324

3 files changed, 606 insertions, 418 deletions

diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
index 80c81ab..5acdf39 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.c
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c
@@ -12,90 +12,286 @@
  *	TODO: Add support of high prio queues (currently disabled)
  *
  */
-#include <linux/autoconf.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/spinlock.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
 #include <asm/mipsregs.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_irq.h>
+#include <adm5120_switch.h>
+
 #include "adm5120sw.h"
 
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
+#define DRV_NAME	"adm5120-switch"
+#define DRV_DESC	"ADM5120 built-in ethernet switch driver"
+#define DRV_VERSION	"0.1.0"
 
 MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
 MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
 MODULE_LICENSE("GPL");
 
+/* ------------------------------------------------------------------------ */
+
+#if 1 /*def ADM5120_SWITCH_DEBUG*/
+#define SW_DBG(f, a...)		printk(KERN_DEBUG "%s: " f, DRV_NAME , ## a)
+#else
+#define SW_DBG(f, a...)		do {} while (0)
+#endif
+#define SW_ERR(f, a...)		printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
+#define SW_INFO(f, a...)	printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
+
+#define SWITCH_NUM_PORTS	6
+#define ETH_CSUM_LEN		4
+
+#define RX_MAX_PKTLEN	1550
+#define RX_RING_SIZE	64
+
+#define TX_RING_SIZE	32
+#define TX_QUEUE_LEN	28	/* Limit ring entries actually used. */
+#define TX_TIMEOUT	HZ*400
+
+#define SKB_ALLOC_LEN		(RX_MAX_PKTLEN + 32)
+#define SKB_RESERVE_LEN		(NET_IP_ALIGN + NET_SKB_PAD)
+
+#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
+#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
+#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
+#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
+			SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
+			SWITCH_INT_CPQF | SWITCH_INT_GQF)
+
+#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
+			SWITCH_INTS_ERR | SWITCH_INTS_Q | \
+			SWITCH_INT_MD | SWITCH_INT_PSC)
+
+#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
+#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF)
+
+/* ------------------------------------------------------------------------ */
+
+struct dma_desc {
+	__u32			buf1;
+#define DESC_OWN		(1UL << 31)	/* Owned by the switch */
+#define DESC_EOR		(1UL << 28)	/* End of Ring */
+#define DESC_ADDR_MASK		0x1FFFFFF
+#define DESC_ADDR(x)	((__u32)(x) & DESC_ADDR_MASK)
+	__u32			buf2;
+#define DESC_BUF2_EN		(1UL << 31)	/* Buffer 2 enable */
+	__u32			buflen;
+	__u32			misc;
+/* definitions for tx/rx descriptors */
+#define DESC_PKTLEN_SHIFT	16
+#define DESC_PKTLEN_MASK	0x7FF
+/* tx descriptor specific part */
+#define DESC_CSUM		(1UL << 31)	/* Append checksum */
+#define DESC_DSTPORT_SHIFT	8
+#define DESC_DSTPORT_MASK	0x3F
+#define DESC_VLAN_MASK		0x3F
+/* rx descriptor specific part */
+#define DESC_SRCPORT_SHIFT	12
+#define DESC_SRCPORT_MASK	0x7
+#define DESC_DA_MASK		0x3
+#define DESC_DA_SHIFT		4
+#define DESC_IPCSUM_FAIL	(1UL << 3)	/* IP checksum fail */
+#define DESC_VLAN_TAG		(1UL << 2)	/* VLAN tag present */
+#define DESC_TYPE_MASK		0x3		/* mask for Packet type */
+#define DESC_TYPE_IP		0x0		/* IP packet */
+#define DESC_TYPE_PPPoE		0x1		/* PPPoE packet */
+} __attribute__ ((aligned(16)));
+
+static inline u32 desc_get_srcport(struct dma_desc *desc)
+{
+	return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
+}
+
+static inline u32 desc_get_pktlen(struct dma_desc *desc)
+{
+	return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
+}
+
+static inline int desc_ipcsum_fail(struct dma_desc *desc)
+{
+	return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
+}
+
+/* ------------------------------------------------------------------------ */
+
 /* default settings - unlimited TX and RX on all ports, default shaper mode */
-static unsigned char bw_matrix[SW_DEVS] = {
+static unsigned char bw_matrix[SWITCH_NUM_PORTS] = {
 	0, 0, 0, 0, 0, 0
 };
 
 static int adm5120_nrdevs;
 
-static struct net_device *adm5120_devs[SW_DEVS];
+static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
 /* Lookup table port -> device */
-static struct net_device *adm5120_port[SW_DEVS];
-
-static struct adm5120_dma
-    adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
-    adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
-    adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
-    adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
-    *adm5120_dma_txh,
-    *adm5120_dma_txl,
-    *adm5120_dma_rxh,
-    *adm5120_dma_rxl;
-static struct sk_buff
-    *adm5120_skb_rxh[ADM5120_DMA_RXH],
-    *adm5120_skb_rxl[ADM5120_DMA_RXL],
-    *adm5120_skb_txh[ADM5120_DMA_TXH],
-    *adm5120_skb_txl[ADM5120_DMA_TXL];
-static int adm5120_rxli = 0;
-static int adm5120_txli = 0;
-/*static int adm5120_txhi = 0;*/
-static int adm5120_if_open = 0;
-
-static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
+
+static struct dma_desc txh_descs_v[TX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc txl_descs_v[TX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc rxh_descs_v[RX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc rxl_descs_v[RX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc *txh_descs;
+static struct dma_desc *txl_descs;
+static struct dma_desc *rxh_descs;
+static struct dma_desc *rxl_descs;
+
+static struct sk_buff *rxl_skbuff[RX_RING_SIZE];
+static struct sk_buff *rxh_skbuff[RX_RING_SIZE];
+static struct sk_buff *txl_skbuff[TX_RING_SIZE];
+static struct sk_buff *txh_skbuff[TX_RING_SIZE];
+
+static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
+static unsigned int cur_txl, dirty_txl;
+
+static unsigned int sw_used;
+
+static spinlock_t sw_lock = SPIN_LOCK_UNLOCKED;
+
+static struct net_device sw_dev;
+
+/* ------------------------------------------------------------------------ */
+
+static inline u32 sw_read_reg(u32 reg)
 {
-	*(volatile unsigned long*)(SW_BASE+reg) = val;
+	return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
 }
 
-static inline unsigned long adm5120_get_reg(unsigned int reg)
+static inline void sw_write_reg(u32 reg, u32 val)
 {
-	return *(volatile unsigned long*)(SW_BASE+reg);
+	__raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
 }
 
-static inline void adm5120_rx_dma_update(struct adm5120_dma *dma,
+static inline void sw_int_disable(u32 mask)
+{
+	u32	t;
+
+	t = sw_read_reg(SWITCH_REG_INT_MASK);
+	t |= mask;
+	sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_enable(u32 mask)
+{
+	u32	t;
+
+	t = sw_read_reg(SWITCH_REG_INT_MASK);
+	t &= ~mask;
+	sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_ack(u32 mask)
+{
+	sw_write_reg(SWITCH_REG_INT_STATUS, mask);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
+{
+	u32 t;
+
+	SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
+
+	t = desc->buf1;
+	SW_DBG("    buf1 %08X addr=%08X; len=%08X %s%s\n", t,
+		t & DESC_ADDR_MASK,
+		desc->buflen,
+		(t & DESC_OWN) ? "SWITCH" : "CPU",
+		(t & DESC_EOR) ? " RE" : "");
+
+	t = desc->buf2;
+	SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
+		t & DESC_ADDR_MASK,
+		(t & DESC_BUF2_EN) ? " EN" : "" );
+
+	t = desc->misc;
+	if (tx)
+		SW_DBG("    misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
+			(t & DESC_CSUM) ? " CSUM" : "",
+			(t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+			(t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
+			t & DESC_VLAN_MASK);
+	else
+		SW_DBG("    misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
+			t,
+			(t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+			(t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
+			(t >> DESC_DA_SHIFT) & DESC_DA_MASK,
+			(t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
+			(t & DESC_VLAN_TAG) ? " VLAN" : "",
+			(t & DESC_TYPE_MASK));
+}
+
+static void sw_dump_intr_mask(char *label, u32 mask)
+{
+	SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+		label, mask,
+		(mask & SWITCH_INT_SHD) ? " SHD" : "",
+		(mask & SWITCH_INT_SLD) ? " SLD" : "",
+		(mask & SWITCH_INT_RHD) ? " RHD" : "",
+		(mask & SWITCH_INT_RLD) ? " RLD" : "",
+		(mask & SWITCH_INT_HDF) ? " HDF" : "",
+		(mask & SWITCH_INT_LDF) ? " LDF" : "",
+		(mask & SWITCH_INT_P0QF) ? " P0QF" : "",
+		(mask & SWITCH_INT_P1QF) ? " P1QF" : "",
+		(mask & SWITCH_INT_P2QF) ? " P2QF" : "",
+		(mask & SWITCH_INT_P3QF) ? " P3QF" : "",
+		(mask & SWITCH_INT_P4QF) ? " P4QF" : "",
+		(mask & SWITCH_INT_CPQF) ? " CPQF" : "",
+		(mask & SWITCH_INT_GQF) ? " GQF" : "",
+		(mask & SWITCH_INT_MD) ? " MD" : "",
+		(mask & SWITCH_INT_BCS) ? " BCS" : "",
+		(mask & SWITCH_INT_PSC) ? " PSC" : "",
+		(mask & SWITCH_INT_ID) ? " ID" : "",
+		(mask & SWITCH_INT_W0TE) ? " W0TE" : "",
+		(mask & SWITCH_INT_W1TE) ? " W1TE" : "",
+		(mask & SWITCH_INT_RDE) ? " RDE" : "",
+		(mask & SWITCH_INT_SDE) ? " SDE" : "",
+		(mask & SWITCH_INT_CPUH) ? " CPUH" : "");
+}
+
+/* ------------------------------------------------------------------------ */
+
+static inline void adm5120_rx_dma_update(struct dma_desc *desc,
 	struct sk_buff *skb, int end)
 {
-	dma->status = 0;
-	dma->cntl = 0;
-	dma->len = ADM5120_DMA_RXSIZE;
-	dma->data = ADM5120_DMA_ADDR(skb->data) |
-		ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0);
+	desc->misc = 0;
+	desc->buf2 = 0;
+	desc->buflen = RX_MAX_PKTLEN;
+	desc->buf1 = DESC_ADDR(skb->data) |
+		DESC_OWN | (end ? DESC_EOR : 0);
 }
 
-static int adm5120_rx(struct net_device *dev,int *budget)
+static int adm5120_switch_rx(struct net_device *dev, int *budget)
 {
 	struct sk_buff *skb, *skbn;
 	struct adm5120_sw *priv;
 	struct net_device *cdev;
-	struct adm5120_dma *dma;
-	int port, len, quota;
+	struct dma_desc *desc;
+	int len, quota;
 
 	quota = min(dev->quota, *budget);
-	dma = &adm5120_dma_rxl[adm5120_rxli];
-	while (!(dma->data & ADM5120_DMA_OWN) && quota) {
-		port = (dma->status & ADM5120_DMA_PORTID);
-		port >>= ADM5120_DMA_PORTSHIFT;
+	SW_DBG("%s polling, quota=%d\n", dev->name, quota);
+
+	sw_int_ack(SWITCH_INTS_POLL);
+
+	desc = &rxl_descs[cur_rxl];
+	while (!(desc->buf1 & DESC_OWN) && quota) {
+		u32 port = desc_get_srcport(desc);
 		cdev = adm5120_port[port];
 		if (cdev != dev) {      /* The current packet belongs to a different device */
 			if ((cdev==NULL) || !netif_running(cdev)) {
@@ -109,39 +305,38 @@ static int adm5120_rx(struct net_device *dev,int *budget)
 			}
 
 		}
-		skb = adm5120_skb_rxl[adm5120_rxli];
-		len = (dma->status & ADM5120_DMA_LEN);
-		len >>= ADM5120_DMA_LENSHIFT;
-		len -= ETH_FCS;
+		skb = rxl_skbuff[cur_rxl];
+		len = desc_get_pktlen(desc);
+		len -= ETH_CSUM_LEN;
 
 		priv = netdev_priv(dev);
-		if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
-			dma->status & ADM5120_DMA_FCSERR) {
-			priv->stats.rx_errors++;
+		if (len <= 0 || len > RX_MAX_PKTLEN ||
+			desc_ipcsum_fail(desc)) {
+			dev->stats.rx_errors++;
 			skbn = NULL;
 		} else {
-			skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+			skbn = dev_alloc_skb(SKB_ALLOC_LEN);
 			if (skbn) {
 				skb_put(skb, len);
 				skb->dev = dev;
 				skb->protocol = eth_type_trans(skb, dev);
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 				dev->last_rx = jiffies;
-				priv->stats.rx_packets++;
-				priv->stats.rx_bytes += len;
-				skb_reserve(skbn, NET_IP_ALIGN);
-				adm5120_skb_rxl[adm5120_rxli] = skbn;
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += len;
+				skb_reserve(skbn, SKB_RESERVE_LEN);
+				rxl_skbuff[cur_rxl] = skbn;
 			} else {
-				printk(KERN_INFO "%s recycling!\n", dev->name);
+				SW_INFO("%s recycling!\n", dev->name);
 			}
 		}
 rx_skip:
-		adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
-			adm5120_skb_rxl[adm5120_rxli],
-			(ADM5120_DMA_RXL-1==adm5120_rxli));
-		if (ADM5120_DMA_RXL == ++adm5120_rxli)
-			adm5120_rxli = 0;
-		dma = &adm5120_dma_rxl[adm5120_rxli];
+		adm5120_rx_dma_update(&rxl_descs[cur_rxl],
+			rxl_skbuff[cur_rxl],
+			(RX_RING_SIZE-1==cur_rxl));
+		if (RX_RING_SIZE == ++cur_rxl)
+			cur_rxl = 0;
+		desc = &rxl_descs[cur_rxl];
 		if (skbn){
 			netif_receive_skb(skb);
 			dev->quota--;
@@ -149,59 +344,92 @@ rx_skip:
 			quota--;
 		}
 	} /* while */
-	/* If there are still packets to process, return 1 */
-	if (quota){
-		/* No more packets to process, so disable the polling and reenable the interrupts */
+
+	if (quota) {
 		netif_rx_complete(dev);
-		adm5120_set_reg(ADM5120_INT_MASK,
-			adm5120_get_reg(ADM5120_INT_MASK) &
-			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+		sw_int_enable(SWITCH_INTS_POLL);
 		return 0;
-
-
 	}
+
+	/* If there are still packets to process, return 1 */
 	return 1;
 }
 
-static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+static void adm5120_switch_tx(void)
 {
-	unsigned long intreg, intmask;
-	int port;
-	struct net_device *dev;
+	unsigned int entry;
+
+	/* find and cleanup dirty tx descriptors */
+	entry = dirty_txl % TX_RING_SIZE;
+	while (dirty_txl != cur_txl) {
+		struct dma_desc *desc = &txl_descs[entry];
+		struct sk_buff *skb = txl_skbuff[entry];
+
+		if (desc->buf1 & DESC_OWN)
+			break;
 
-	intmask = adm5120_get_reg(ADM5120_INT_MASK);   /* Remember interrupt mask */
-	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */
-
-	intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */
-	adm5120_set_reg(ADM5120_INT_ST, intreg);  /* Clear interrupt status */
-
-	/* In NAPI operation the interrupts are disabled and the polling mechanism
-	 * is activated. The interrupts are finally enabled again in the polling routine.
-	 */
-	if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) {
-		/* check rx buffer for port number */
-		port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID;
-		port >>= ADM5120_DMA_PORTSHIFT;
-		dev = adm5120_port[port];
-		if ((dev==NULL) || !netif_running(dev)) {
-		/* discard (update with old skb) */
-			adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
-				adm5120_skb_rxl[adm5120_rxli],
-				(ADM5120_DMA_RXL-1==adm5120_rxli));
-			if (ADM5120_DMA_RXL == ++adm5120_rxli)
-				adm5120_rxli = 0;
+		sw_dump_desc("tx done", desc, 1);
+		if (netif_running(skb->dev)) {
+			skb->dev->stats.tx_bytes += skb->len;
+			skb->dev->stats.tx_packets++;
 		}
-		else {
-			netif_rx_schedule(dev);
-			intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */
+
+		dev_kfree_skb_irq(skb);
+		txl_skbuff[entry] = NULL;
+		entry = (++dirty_txl) % TX_RING_SIZE;
+	}
+
+	if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
+		/* wake up queue of all devices */
+		int i;
+		for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+			if (!adm5120_devs[i])
+				continue;
+			netif_wake_queue(adm5120_devs[i]);
 		}
 	}
-#ifdef CONFIG_DEBUG
-	if (intreg & ~(intmask))
-		printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask)));
-#endif
+}
+
+static irqreturn_t adm5120_poll_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	u32 status;
+
+	status = sw_read_reg(SWITCH_REG_INT_STATUS);
+	status &= ~(sw_read_reg(SWITCH_REG_INT_MASK));
+
+	status &= SWITCH_INTS_POLL;
+	if (!status)
+		return IRQ_NONE;
+
+	sw_int_disable(SWITCH_INTS_POLL);
+	netif_rx_schedule(dev);
+
+	SW_DBG("%s handling IRQ%d\n", dev->name, irq);
+	return IRQ_HANDLED;
+}
 
-	adm5120_set_reg(ADM5120_INT_MASK, intmask);
+static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
+{
+	irqreturn_t ret;
+	u32 status;
+
+	status = sw_read_reg(SWITCH_REG_INT_STATUS);
+	status &= ~(sw_read_reg(SWITCH_REG_INT_MASK));
+
+	sw_dump_intr_mask("sw irq", status);
+
+	status &= SWITCH_INTS_ALL & ~SWITCH_INTS_POLL;
+	if (!status)
+		return IRQ_NONE;
+
+	sw_int_ack(status);
+
+	if (status & SWITCH_INT_SLD) {
+		spin_lock(&sw_lock);
+		adm5120_switch_tx();
+		spin_unlock(&sw_lock);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -212,13 +440,14 @@ static void adm5120_set_vlan(char *matrix)
 	int vlan_port, port;
 
 	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-	adm5120_set_reg(ADM5120_VLAN_GI, val);
+	sw_write_reg(SWITCH_REG_VLAN_G1, val);
 	val = matrix[4] + (matrix[5]<<8);
-	adm5120_set_reg(ADM5120_VLAN_GII, val);
+	sw_write_reg(SWITCH_REG_VLAN_G2, val);
+
 	/* Now set/update the port vs. device lookup table */
-	for (port=0; port<SW_DEVS; port++) {
-		for (vlan_port=0; vlan_port<SW_DEVS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
-		if (vlan_port <SW_DEVS)
+	for (port=0; port<SWITCH_NUM_PORTS; port++) {
+		for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+		if (vlan_port <SWITCH_NUM_PORTS)
 			adm5120_port[port] = adm5120_devs[vlan_port];
 		else
 			adm5120_port[port] = NULL;
@@ -231,193 +460,181 @@ static void adm5120_set_bw(char *matrix)
 
 	/* Port 0 to 3 are set using the bandwidth control 0 register */
 	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-	adm5120_set_reg(ADM5120_BW_CTL0, val);
+	sw_write_reg(SWITCH_REG_BW_CNTL0, val);
 
 	/* Port 4 and 5 are set using the bandwidth control 1 register */
 	val = matrix[4];
 	if (matrix[5] == 1)
-		adm5120_set_reg(ADM5120_BW_CTL1, val | 0x80000000);
+		sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
 	else
-		adm5120_set_reg(ADM5120_BW_CTL1, val & ~0x8000000);
+		sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
 
-	printk(KERN_DEBUG "D: ctl0 0x%lx, ctl1 0x%lx\n",
-		adm5120_get_reg(ADM5120_BW_CTL0),
-		adm5120_get_reg(ADM5120_BW_CTL1));
+	SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
+		sw_read_reg(SWITCH_REG_BW_CNTL1));
 }
 
-static int adm5120_sw_open(struct net_device *dev)
+static int adm5120_switch_open(struct net_device *dev)
 {
-	unsigned long val;
+	u32 t;
 	int i;
 
 	netif_start_queue(dev);
-	if (!adm5120_if_open++) {
+	if (!sw_used++)
 		/* enable interrupts on first open */
-		adm5120_set_reg(ADM5120_INT_MASK,
-			adm5120_get_reg(ADM5120_INT_MASK) &
-			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
-	}
+		sw_int_enable(SWITCH_INTS_USED);
+
 	/* enable (additional) port */
-	val = adm5120_get_reg(ADM5120_PORT_CONF0);
-	for (i=0; i<SW_DEVS; i++) {
+	t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+	for (i = 0; i < SWITCH_NUM_PORTS; i++) {
 		if (dev == adm5120_devs[i])
-			val &= ~adm5120_eth_vlans[i];
+			t &= ~adm5120_eth_vlans[i];
 	}
-	adm5120_set_reg(ADM5120_PORT_CONF0, val);
+	sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
 	return 0;
 }
 
-static int adm5120_sw_stop(struct net_device *dev)
+static int adm5120_switch_stop(struct net_device *dev)
 {
-	unsigned long val;
+	u32 t;
 	int i;
 
-	if (!--adm5120_if_open) {
-		adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
-	}
+	if (!--sw_used)
+		sw_int_disable(SWITCH_INTS_USED);
+
 	/* disable port if not assigned to other devices */
-	val = adm5120_get_reg(ADM5120_PORT_CONF0) | ADM5120_PORTDISALL;
-	for (i=0; i<SW_DEVS; i++) {
+	t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+	t |= SWITCH_PORTS_NOCPU;
+	for (i = 0; i < SWITCH_NUM_PORTS; i++) {
 		if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
-			val &= ~adm5120_eth_vlans[i];
+			t &= ~adm5120_eth_vlans[i];
 	}
-	adm5120_set_reg(ADM5120_PORT_CONF0, val);
+	sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
 	netif_stop_queue(dev);
 	return 0;
 }
 
-static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+static int adm5120_sw_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct adm5120_dma *dma;
-	struct sk_buff **skbl = adm5120_skb_txl;
+	struct dma_desc *desc;
 	struct adm5120_sw *priv = netdev_priv(dev);
+	unsigned int entry;
 	unsigned long data;
 
-	dev->trans_start = jiffies;
-	dma = &adm5120_dma_txl[adm5120_txli];
-	if (dma->data & ADM5120_DMA_OWN) {
+	/* calculate the next TX descriptor entry. */
+	entry = cur_txl % TX_RING_SIZE;
+
+	desc = &txl_descs[entry];
+	if (desc->buf1 & DESC_OWN) {
 		/* We want to write a packet but the TX queue is still
 		 * occupied by the DMA. We are faster than the DMA... */
 		dev_kfree_skb(skb);
-		priv->stats.tx_dropped++;
+		dev->stats.tx_dropped++;
 		return 0;
 	}
-	data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
-	if (adm5120_txli == ADM5120_DMA_TXL-1)
-		data |= ADM5120_DMA_RINGEND;
-	dma->status =
-	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+
+	txl_skbuff[entry] = skb;
+	data = (desc->buf1 & DESC_EOR);
+	data |= DESC_ADDR(skb->data);
+
+	desc->misc =
+	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
 	    (0x1 << priv->port);
 
-	dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-	priv->stats.tx_packets++;
-	priv->stats.tx_bytes += skb->len;
+	desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	/* lock switch irq */
+	spin_lock_irq(&sw_lock);
+
+	desc->buf1 = data | DESC_OWN;
+	sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
 
-	/* free old skbs here instead of tx completion interrupt:
-	 * will hold some more memory allocated but reduces interrupts */
-	if (skbl[adm5120_txli]){
-		dev_kfree_skb(skbl[adm5120_txli]);
+	cur_txl++;
+	if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
+		/* FIXME: stop queue for all devices */
+		netif_stop_queue(dev);
 	}
-	skbl[adm5120_txli] = skb;
 
-	dma->data = data; /* Here we enable the buffer for the TX DMA machine */
-	adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L);
-	if (++adm5120_txli == ADM5120_DMA_TXL)
-		adm5120_txli = 0;
+	dev->trans_start = jiffies;
+
+	spin_unlock_irq(&sw_lock);
+
 	return 0;
 }
 
 static void adm5120_tx_timeout(struct net_device *dev)
 {
-	printk(KERN_INFO "%s: TX timeout\n",dev->name);
+	SW_INFO("TX timeout on %s\n",dev->name);
 }
 
-static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+static void adm5120_set_multicast_list(struct net_device *dev)
 {
 	struct adm5120_sw *priv = netdev_priv(dev);
-	int portmask;
-	unsigned long adm5120_cpup_conf_reg;
+	u32 ports;
+	u32 t;
 
-	portmask = adm5120_eth_vlans[priv->port] & 0x3f;
-
-	adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF);
+	ports = adm5120_eth_vlans[priv->port] & SWITCH_PORTS_NOCPU;
 
+	t = sw_read_reg(SWITCH_REG_CPUP_CONF);
 	if (dev->flags & IFF_PROMISC)
-		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL);
+		/* enable unknown packets */
+		t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
 	else
-		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT);
+		/* disable unknown packets */
+		t |= (ports << CPUP_CONF_DUNP_SHIFT);
 
-	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count)
-		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL);
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+					dev->mc_count)
+		/* enable multicast packets */
+		t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
 	else
-		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT);
-
-		/* If there is any port configured to be in promiscuous mode, then the */
-		/* Bridge Test Mode has to be activated. This will result in           */
-		/* transporting also packets learned in another VLAN to be forwarded   */
-		/* to the CPU.                                                         */
-		/* The difficult scenario is when we want to build a bridge on the CPU.*/
-		/* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
-		/* CPU port in VLAN1. Now we build a bridge on the CPU between         */
-		/* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
-		/* Now assume a packet with ethernet source address 99 enters port 0   */
-		/* It will be forwarded to the CPU because it is unknown. Then the     */
-		/* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
-		/* When now a packet with ethernet destination address 99 comes in at  */
-		/* port 1 in VLAN1, then the switch has learned that this address is   */
-		/* located at port 0 in VLAN0. Therefore the switch will drop          */
-		/* this packet. In order to avoid this and to send the packet still    */
-		/* to the CPU, the Bridge Test Mode has to be activated.               */
-
-		/* Check if there is any vlan in promisc mode. */
-	if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL)
-		adm5120_cpup_conf_reg |= ADM5120_BTM;  /* Set the BTM     */
+		/* disable multicast packets */
+		t |= (ports << CPUP_CONF_DMCP_SHIFT);
+
+	/* If there is any port configured to be in promiscuous mode, then the */
+	/* Bridge Test Mode has to be activated. This will result in           */
+	/* transporting also packets learned in another VLAN to be forwarded   */
+	/* to the CPU.                                                         */
+	/* The difficult scenario is when we want to build a bridge on the CPU.*/
+	/* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
+	/* CPU port in VLAN1. Now we build a bridge on the CPU between         */
+	/* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
+	/* Now assume a packet with ethernet source address 99 enters port 0   */
+	/* It will be forwarded to the CPU because it is unknown. Then the     */
+	/* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
+	/* When now a packet with ethernet destination address 99 comes in at  */
+	/* port 1 in VLAN1, then the switch has learned that this address is   */
+	/* located at port 0 in VLAN0. Therefore the switch will drop          */
+	/* this packet. In order to avoid this and to send the packet still    */
+	/* to the CPU, the Bridge Test Mode has to be activated.               */
+
+	/* Check if there is any vlan in promisc mode. */
+	if (t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
+		t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
 	else
-		adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */
+		t |= CPUP_CONF_BTM;  /* Enable Bridge Testing Mode */
 
-	adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg);
+	sw_write_reg(SWITCH_REG_CPUP_CONF, t);
 
-	return &((struct adm5120_sw *)netdev_priv(dev))->stats;
-}
-
-static void adm5120_set_multicast_list(struct net_device *dev)
-{
-	struct adm5120_sw *priv = netdev_priv(dev);
-	int portmask;
-
-	portmask = adm5120_eth_vlans[priv->port] & 0x3f;
-
-	if (dev->flags & IFF_PROMISC)
-		adm5120_set_reg(ADM5120_CPUP_CONF,
-		    adm5120_get_reg(ADM5120_CPUP_CONF) &
-		    ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
-	else
-		adm5120_set_reg(ADM5120_CPUP_CONF,
-		    adm5120_get_reg(ADM5120_CPUP_CONF) |
-		    (portmask << ADM5120_DISUNSHIFT));
-
-	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-	    dev->mc_count)
-		adm5120_set_reg(ADM5120_CPUP_CONF,
-		    adm5120_get_reg(ADM5120_CPUP_CONF) &
-		    ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
-	else
-		adm5120_set_reg(ADM5120_CPUP_CONF,
-		    adm5120_get_reg(ADM5120_CPUP_CONF) |
-		    (portmask << ADM5120_DISMCSHIFT));
 }
 
 static void adm5120_write_mac(struct net_device *dev)
 {
 	struct adm5120_sw *priv = netdev_priv(dev);
 	unsigned char *mac = dev->dev_addr;
+	u32 t;
+
+	t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
+		(mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC4_SHIFT);
+	sw_write_reg(SWITCH_REG_MAC_WT1, t);
 
-	adm5120_set_reg(ADM5120_MAC_WT1,
-	    mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
-	adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
-	    (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+	t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
+		MAC_WT0_MAWC | MAC_WT0_WVE | (priv->port<<3);
 
-	while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+	sw_write_reg(SWITCH_REG_MAC_WT0, t);
+
+	while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
 }
 
 static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
@@ -436,115 +653,133 @@ static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	struct adm5120_sw *priv = netdev_priv(dev);
 
 	switch(cmd) {
-		case SIOCGADMINFO:
-			info.magic = 0x5120;
-			info.ports = adm5120_nrdevs;
-			info.vlan = priv->port;
-			err = copy_to_user(rq->ifr_data, &info, sizeof(info));
-			if (err)
-				return -EFAULT;
-			break;
-		case SIOCSMATRIX:
-			if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-			err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
-			    sizeof(adm5120_eth_vlans));
-			if (err)
-				return -EFAULT;
-			adm5120_set_vlan(adm5120_eth_vlans);
-			break;
-		case SIOCGMATRIX:
-			err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
-			    sizeof(adm5120_eth_vlans));
-			if (err)
-				return -EFAULT;
-			break;
-		case SIOCGETBW:
-			err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
-			if (err)
-				return -EFAULT;
-			break;
-		case SIOCSETBW:
-			if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-			err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
-			if (err)
-				return -EFAULT;
-			adm5120_set_bw(bw_matrix);
-			break;
-		default:
-			return -EOPNOTSUPP;
+	case SIOCGADMINFO:
+		info.magic = 0x5120;
+		info.ports = adm5120_nrdevs;
+		info.vlan = priv->port;
+		err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+		if (err)
+			return -EFAULT;
+		break;
+	case SIOCSMATRIX:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
+					sizeof(adm5120_eth_vlans));
+		if (err)
+			return -EFAULT;
+		adm5120_set_vlan(adm5120_eth_vlans);
+		break;
+	case SIOCGMATRIX:
+		err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
+					sizeof(adm5120_eth_vlans));
+		if (err)
+			return -EFAULT;
+		break;
+	case SIOCGETBW:
+		err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
+		if (err)
+			return -EFAULT;
+		break;
+	case SIOCSETBW:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
+		if (err)
+			return -EFAULT;
+		adm5120_set_bw(bw_matrix);
+		break;
+	default:
+		return -EOPNOTSUPP;
 	}
 	return 0;
 }
 
-static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int num)
+static void adm5120_dma_tx_init(struct dma_desc *desc, struct sk_buff **skbl,
+		int num)
 {
-	memset(dma, 0, sizeof(struct adm5120_dma)*num);
-	dma[num-1].data |= ADM5120_DMA_RINGEND;
+	memset(desc, 0, num * sizeof(*desc));
+	desc[num-1].buf1 |= DESC_EOR;
 	memset(skbl, 0, sizeof(struct skb*)*num);
 }
 
-static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int num)
+static void adm5120_dma_rx_init(struct dma_desc *desc, struct sk_buff **skbl,
+		int num)
 {
 	int i;
 
-	memset(dma, 0, sizeof(struct adm5120_dma)*num);
+	memset(desc, 0, num * sizeof(*desc));
 	for (i=0; i<num; i++) {
-		skbl[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+		skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
 		if (!skbl[i]) {
 			i=num;
 			break;
 		}
-		skb_reserve(skbl[i], NET_IP_ALIGN);
-		adm5120_rx_dma_update(&dma[i], skbl[i], (num-1==i));
+		skb_reserve(skbl[i], SKB_RESERVE_LEN);
+		adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
 	}
 }
 
 static int __init adm5120_sw_init(void)
 {
-	int i, err;
 	struct net_device *dev;
+	u32 t;
+	int i, err;
 
-	err = request_irq(ADM5120_IRQ_SWITCH, adm5120_sw_irq, 0, "ethernet switch", NULL);
+	err = request_irq(ADM5120_IRQ_SWITCH, adm5120_switch_irq,
+		(IRQF_SHARED | IRQF_DISABLED), "switch", &sw_dev);
 	if (err)
 		goto out;
 
 	adm5120_nrdevs = adm5120_eth_num_ports;
 
-	adm5120_set_reg(ADM5120_CPUP_CONF,
-	    ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
-	    ADM5120_DISUNALL | ADM5120_DISMCALL);
-	adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP | ADM5120_PORTDISALL);
-
-	adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
-	    ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
-	adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
-	    ADM5120_PHY_NTH);
+	t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
+		SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
+		SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
+	sw_write_reg(SWITCH_REG_CPUP_CONF, t);
+
+	t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
+		(SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
+		(SWITCH_PORTS_NOCPU);
+	sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
+	/* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
+	t =  SWITCH_PORTS_PHY |
+		(SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
+		(SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
+		(SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
+		(SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
+		PHY_CNTL2_RMAE;
+	SW_WRITE_REG(PHY_CNTL2, t);
+
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
+	t |= PHY_CNTL3_RNT;
+	sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
 
 	/* Force all the packets from all ports are low priority */
-	adm5120_set_reg(ADM5120_PRI_CNTL, 0);
-
-	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
-	adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
-
-	adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
-	adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
-	adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
-	adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
-
-	adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
-	adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
-	adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
-	adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
-	adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
-	adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
-	adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
-	adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
-
-	for (i = 0; i < SW_DEVS; i++) {
+	sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
+
+	sw_int_disable(SWITCH_INTS_ALL);
+	sw_int_ack(SWITCH_INTS_ALL);
+
+	cur_txl = dirty_txl = 0;
+	cur_rxl = dirty_rxl = 0;
+
+	txh_descs = (void *)KSEG1ADDR((u32)txh_descs_v);
+	txl_descs = (void *)KSEG1ADDR((u32)txl_descs_v);
+	rxh_descs = (void *)KSEG1ADDR((u32)rxh_descs_v);
+	rxl_descs = (void *)KSEG1ADDR((u32)rxl_descs_v);
+
+	adm5120_dma_tx_init(txh_descs, txh_skbuff, TX_RING_SIZE);
+	adm5120_dma_tx_init(txl_descs, txl_skbuff, TX_RING_SIZE);
+	adm5120_dma_rx_init(rxh_descs, rxh_skbuff, RX_RING_SIZE);
+	adm5120_dma_rx_init(rxl_descs, rxl_skbuff, RX_RING_SIZE);
+	sw_write_reg(SWITCH_REG_SHDA, KSEG1ADDR(txh_descs));
+	sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
+	sw_write_reg(SWITCH_REG_RHDA, KSEG1ADDR(rxh_descs));
+	sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
+
+	for (i = 0; i < SWITCH_NUM_PORTS; i++) {
 		adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
 		if (!adm5120_devs[i]) {
 			err = -ENOMEM;
@@ -552,37 +787,46 @@ static int __init adm5120_sw_init(void)
 		}
 
 		dev = adm5120_devs[i];
+		err = request_irq(ADM5120_IRQ_SWITCH, adm5120_poll_irq,
+			(IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
+		if (err) {
+			SW_ERR("unable to get irq for %s\n", dev->name);
+			goto out_int;
+		}
+
 		SET_MODULE_OWNER(dev);
 		memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
 		((struct adm5120_sw*)netdev_priv(dev))->port = i;
-		dev->base_addr = SW_BASE;
+		dev->base_addr = ADM5120_SWITCH_BASE;
 		dev->irq = ADM5120_IRQ_SWITCH;
-		dev->open = adm5120_sw_open;
-		dev->hard_start_xmit = adm5120_sw_tx;
-		dev->stop = adm5120_sw_stop;
-		dev->get_stats = adm5120_sw_stats;
+		dev->open = adm5120_switch_open;
+		dev->hard_start_xmit = adm5120_sw_start_xmit;
+		dev->stop = adm5120_switch_stop;
 		dev->set_multicast_list = adm5120_set_multicast_list;
 		dev->do_ioctl = adm5120_do_ioctl;
 		dev->tx_timeout = adm5120_tx_timeout;
-		dev->watchdog_timeo = ETH_TX_TIMEOUT;
+		dev->watchdog_timeo = TX_TIMEOUT;
 		dev->set_mac_address = adm5120_sw_set_mac_address;
-		dev->poll = adm5120_rx;
+		dev->poll = adm5120_switch_rx;
 		dev->weight = 64;
 
 		memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
 		adm5120_write_mac(dev);
 
 		if ((err = register_netdev(dev))) {
+			free_irq(ADM5120_IRQ_SWITCH, dev);
 			free_netdev(dev);
 			goto out_int;
 		}
-		printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+		SW_INFO("%s created for switch port%d\n", dev->name, i);
 	}
 	/* setup vlan/port mapping after devs are filled up */
 	adm5120_set_vlan(adm5120_eth_vlans);
 
-	adm5120_set_reg(ADM5120_CPUP_CONF,
-	    ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+	/* enable CPU port */
+	t = sw_read_reg(SWITCH_REG_CPUP_CONF);
+	t &= ~CPUP_CONF_DCPUP;
+	sw_write_reg(SWITCH_REG_CPUP_CONF, t);
 
 	return 0;
 
@@ -594,7 +838,7 @@ out_int:
 	}
 	free_irq(ADM5120_IRQ_SWITCH, NULL);
 out:
-	printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+	SW_ERR("init failed\n");
 	return err;
 }
 
@@ -602,22 +846,25 @@ static void __exit adm5120_sw_exit(void)
 {
 	int i;
 
-	for (i = 0; i < SW_DEVS; i++) {
-		unregister_netdev(adm5120_devs[i]);
-		free_netdev(adm5120_devs[i]);
+	for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+		struct net_device *dev = adm5120_devs[i];
+		unregister_netdev(dev);
+		free_irq(ADM5120_IRQ_SWITCH, dev);
+		free_netdev(dev);
 	}
 
-	free_irq(ADM5120_IRQ_SWITCH, NULL);
+	free_irq(ADM5120_IRQ_SWITCH, &sw_dev);
 
-	for (i = 0; i < ADM5120_DMA_RXH; i++) {
-		if (!adm5120_skb_rxh[i])
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (!rxh_skbuff[i])
 			break;
-		kfree_skb(adm5120_skb_rxh[i]);
+		kfree_skb(rxh_skbuff[i]);
 	}
-	for (i = 0; i < ADM5120_DMA_RXL; i++) {
-		if (!adm5120_skb_rxl[i])
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (!rxl_skbuff[i])
 			break;
-		kfree_skb(adm5120_skb_rxl[i]);
+		kfree_skb(rxl_skbuff[i]);
 	}
 }
 
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h
index a3b4ec0..34f1213 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.h
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.h
@@ -10,93 +10,8 @@
 #ifndef _INCLUDE_ADM5120SW_H_
 #define _INCLUDE_ADM5120SW_H_
 
-#define SW_BASE	KSEG1ADDR(0x12000000)
-#define SW_DEVS	6
-
-#define ETH_TX_TIMEOUT		HZ*400
-#define ETH_FCS 4;
-
-#define ADM5120_CODE		0x00		/* CPU description */
-#define ADM5120_CODE_PQFP	0x20000000	/* package type */
-#define ADM5120_SW_CONF		0x20            /* Switch configuration register */
-#define ADM5120_SW_CONF_BPM	0x00300000      /* Mask for backpressure mode */
-#define ADM5120_CPUP_CONF	0x24		/* CPU port config */
-#define ADM5120_DISCCPUPORT	0x00000001	/* disable cpu port */
-#define ADM5120_CRC_PADDING	0x00000002	/* software crc */
-#define ADM5120_BTM		0x00000004      /* bridge test mode */
-#define ADM5120_DISUNSHIFT	9
-#define ADM5120_DISUNALL	0x00007e00	/* disable unknown from all */
-#define ADM5120_DISMCSHIFT	16
-#define ADM5120_DISMCALL	0x003f0000	/* disable multicast from all */
-#define ADM5120_PORT_CONF0	0x28
-#define ADM5120_ENMC		0x00003f00	/* Enable MC routing (ex cpu) */
-#define ADM5120_ENBP		0x003f0000	/* Enable Back Pressure */
-#define ADM5120_PORTDISALL     	0x0000003F
-#define ADM5120_VLAN_GI		0x40		/* VLAN settings */
-#define ADM5120_VLAN_GII	0x44
-#define ADM5120_SEND_TRIG	0x48
-#define ADM5120_SEND_TRIG_L	0x00000001
-#define ADM5120_SEND_TRIG_H	0x00000002
-#define ADM5120_MAC_WT0		0x58
-#define ADM5120_MAC_WRITE	0x00000001
-#define ADM5120_MAC_WRITE_DONE	0x00000002
-#define ADM5120_VLAN_EN		0x00000040
-#define ADM5120_MAC_WT1		0x5c
-#define ADM5120_BW_CTL0		0x60		/* Bandwidth control 0 */
-#define ADM5120_BW_CTL1		0x64		/* Bandwidth control 1 */
-#define ADM5120_PHY_CNTL2	0x7c
-#define ADM5120_AUTONEG		0x0000001f	/* Auto negotiate */
-#define ADM5120_NORMAL		0x01f00000	/* PHY normal mode */
-#define ADM5120_AUTOMDIX	0x3e000000	/* Auto MDIX */
-#define ADM5120_PHY_CNTL3	0x80
-#define ADM5120_PHY_NTH		0x00000400
-#define ADM5120_PRI_CNTL	0x84
-#define ADM5120_INT_ST		0xb0
-#define ADM5120_INT_RXH		0x0000004
-#define ADM5120_INT_RXL		0x0000008
-#define ADM5120_INT_HFULL	0x0000010
-#define ADM5120_INT_LFULL	0x0000020
-#define ADM5120_INT_TXH		0x0000001
-#define ADM5120_INT_TXL		0x0000002
-#define ADM5120_INT_MASK	0xb4
-#define ADM5120_INTMASKALL	0x1FDEFFF	/* All interrupts */
-#define ADM5120_INTHANDLE	(ADM5120_INT_RXH | ADM5120_INT_RXL | \
-				 ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
-				 ADM5120_INT_TXH | ADM5120_INT_TXL)
-#define ADM5120_SEND_HBADDR	0xd0
-#define ADM5120_SEND_LBADDR	0xd4
-#define ADM5120_RECEIVE_HBADDR	0xd8
-#define ADM5120_RECEIVE_LBADDR	0xdc
-
-struct adm5120_dma {
-	u32 data;
-	u32 cntl;
-	u32 len;
-	u32 status;
-} __attribute__ ((packed));
-
-#define	ADM5120_DMA_MASK	0x01ffffff
-#define ADM5120_DMA_OWN		0x80000000	/* buffer owner */
-#define ADM5120_DMA_RINGEND	0x10000000	/* Last in DMA ring */
-
-#define ADM5120_DMA_ADDR(ptr)	((u32)(ptr) & ADM5120_DMA_MASK)
-#define ADM5120_DMA_PORTID	0x00007000
-#define ADM5120_DMA_PORTSHIFT	12
-#define ADM5120_DMA_LEN		0x07ff0000
-#define ADM5120_DMA_LENSHIFT	16
-#define ADM5120_DMA_FCSERR	0x00000008
-
-#define ADM5120_DMA_TXH		2
-#define ADM5120_DMA_TXL		64
-#define ADM5120_DMA_RXH		2
-#define ADM5120_DMA_RXL		64
-
-#define ADM5120_DMA_RXSIZE	1550
-#define ADM5120_DMA_EXTRA	20
-
 struct adm5120_sw {
-	int			port;
-	struct net_device_stats	stats;
+	int	port;
 };
 
 #define SIOCSMATRIX	SIOCDEVPRIVATE
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
index c3af94b..d185ce5 100644
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -141,6 +141,9 @@
 #define CPUP_CONF_DCPUP		BIT(0)	/* Disable CPU port */
 #define CPUP_CONF_CRCP		BIT(1)	/* CRC padding from CPU */
 #define CPUP_CONF_BTM		BIT(2)	/* Bridge Testing Mode */
+#define CPUP_CONF_DUNP_SHIFT	9	/* Disable Unknown Packets for portX */
+#define CPUP_CONF_DMCP_SHIFT	16	/* Disable Mcast Packets form portX */
+#define CPUP_CONF_DBCP_SHIFT	24	/* Disable Bcast Packets form portX */
 
 /* PORT_CONF0 register bits */
 #define PORT_CONF0_DP_SHIFT	0	/* Disable Port */
@@ -156,6 +159,26 @@
 #define SEND_TRIG_STL		BIT(0)	/* Send Trigger Low */
 #define SEND_TRIG_STH		BIT(1)	/* Send Trigger High */
 
+/* MAC_WT0 register bits */
+#define MAC_WT0_MAWC		BIT(0)	/* MAC address write command */
+#define MAC_WT0_MWD_SHIFT	1
+#define MAC_WT0_MWD		BIT(1)	/* MAC write done */
+#define MAC_WT0_WFB		BIT(2)	/* Write Filter Bit */
+#define MAC_WT0_WVN_SHIFT	3
+#define MAC_WT0_WVE		BIT(6)	/* Write VLAN enable */
+#define MAC_WT0_WPMN_SHIFT	7
+#define MAC_WT0_WAF_SHIFT	13	/* Write Age Field shift */
+#define MAC_WT0_WAF_EMPTY	0
+#define MAC_WT0_WAF_STATIC	7
+#define MAC_WT0_MAC0_SHIFT	16
+#define MAC_WT0_MAC1_SHIFT	24
+
+/* MAC_WT1 register bits */
+#define MAC_WT1_MAC2_SHIFT	0
+#define MAC_WT1_MAC3_SHIFT	8
+#define MAC_WT1_MAC4_SHIFT	16
+#define MAC_WT1_MAC5_SHIFT	24
+
 /* BW_CNTL0/BW_CNTL1 register bits */
 #define BW_CNTL_DISABLE		0x00
 #define BW_CNTL_64K		0x01
@@ -198,6 +221,9 @@
 /* PHY_CNTL2_RMAE is bad in datasheet */
 #define PHY_CNTL2_RMAE		BIT(31)	/* Recommended MCC Average enable */
 
+/* PHY_CNTL3 register bits */
+#define PHY_CNTL3_RNT		BIT(10) /* Recommend Normal Threshold */
+
 /* PORT_TH register bits */
 #define PORT_TH_PPT_MASK	BITMASK(8)	/* Per Port Threshold */
 #define PORT_TH_CPUT_SHIFT	8		/* CPU Port Buffer Threshold */