mvebu: drop 3.8 support

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38225

37 files changed, 0 insertions, 2799 deletions

diff --git a/target/linux/mvebu/config-3.8 b/target/linux/mvebu/config-3.8
deleted file mode 100644
index 418a212..0000000
--- a/target/linux/mvebu/config-3.8
+++ /dev/null
@@ -1,274 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_ARCH_BCM is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SUNXI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_VEXPRESS=y
-# CONFIG_ARCH_VEXPRESS_CA9X4 is not set
-CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
-# CONFIG_ARCH_VT8500_SINGLE is not set
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CHARLCD is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/mvebu.S"
-CONFIG_DEBUG_MVEBU_UART=y
-# CONFIG_DEBUG_PINCTRL is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_VEXPRESS_UART0_CA9 is not set
-# CONFIG_DEBUG_VEXPRESS_UART0_DETECT is not set
-# CONFIG_DEBUG_VEXPRESS_UART0_RS1 is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ICST=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_ISO9660_FS=y
-CONFIG_JBD=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LOCAL_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MACH_ARMADA_370=y
-CONFIG_MACH_ARMADA_370_XP=y
-CONFIG_MACH_ARMADA_XP=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MPCORE_WATCHDOG is not set
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_CORE=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_CLK_GATING=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_DMA=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_IOPORT=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_XP=y
-# CONFIG_PINCTRL_EXYNOS4 is not set
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-CONFIG_PL310_ERRATA_753970=y
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PL330_DMA is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PLAT_VERSATILE=y
-CONFIG_PLAT_VERSATILE_CLCD=y
-CONFIG_PLAT_VERSATILE_SCHED_CLOCK=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-# CONFIG_SB105X is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DW=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_STOP_MACHINE=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_STATS=y
-CONFIG_TREE_RCU=y
-CONFIG_UDF_FS=m
-CONFIG_UID16=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mvebu/patches-3.8/006-mmc_mvsdio_use_slot_gpio.patch b/target/linux/mvebu/patches-3.8/006-mmc_mvsdio_use_slot_gpio.patch
deleted file mode 100644
index 7bb8c20..0000000
--- a/target/linux/mvebu/patches-3.8/006-mmc_mvsdio_use_slot_gpio.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From patchwork Wed Jan 16 13:13:57 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [2/5] mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
-Date: Wed, 16 Jan 2013 13:13:57 -0000
-From: Andrew Lunn <andrew@lunn.ch>
-X-Patchwork-Id: 1987931
-Message-Id: <1358342040-7130-3-git-send-email-andrew@lunn.ch>
-To: Jason Cooper <jason@lakedaemon.net>
-Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
- linux-mmc@vger.kernel.org, linux@arm.linux.org.uk,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
- Andrew Lunn <andrew@lunn.ch>
-
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice
-set of helper functions to simplify the management of the write
-protect GPIO in MMC host drivers. This patch migrates the mvsdio
-driver to using those helpers, which will make the ->probe() code
-simpler, and therefore ease the process of adding a Device Tree
-binding for this driver.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Stefan Peter <s.peter@mpl.ch>
-Tested-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
----
-drivers/mmc/host/mvsdio.c |   30 +++++-------------------------
- 1 file changed, 5 insertions(+), 25 deletions(-)
-
---- a/drivers/mmc/host/mvsdio.c
-+++ b/drivers/mmc/host/mvsdio.c
-@@ -22,6 +22,7 @@
- #include <linux/clk.h>
- #include <linux/gpio.h>
- #include <linux/mmc/host.h>
-+#include <linux/mmc/slot-gpio.h>
- 
- #include <asm/sizes.h>
- #include <asm/unaligned.h>
-@@ -52,7 +53,6 @@ struct mvsd_host {
- 	struct device *dev;
- 	struct clk *clk;
- 	int gpio_card_detect;
--	int gpio_write_protect;
- };
- 
- #define mvsd_write(offs, val)	writel(val, iobase + (offs))
-@@ -564,20 +564,6 @@ static void mvsd_enable_sdio_irq(struct
- 	spin_unlock_irqrestore(&host->lock, flags);
- }
- 
--static int mvsd_get_ro(struct mmc_host *mmc)
--{
--	struct mvsd_host *host = mmc_priv(mmc);
--
--	if (host->gpio_write_protect)
--		return gpio_get_value(host->gpio_write_protect);
--
--	/*
--	 * Board doesn't support read only detection; let the mmc core
--	 * decide what to do.
--	 */
--	return -ENOSYS;
--}
--
- static void mvsd_power_up(struct mvsd_host *host)
- {
- 	void __iomem *iobase = host->base;
-@@ -674,7 +660,7 @@ static void mvsd_set_ios(struct mmc_host
- 
- static const struct mmc_host_ops mvsd_ops = {
- 	.request		= mvsd_request,
--	.get_ro			= mvsd_get_ro,
-+	.get_ro			= mmc_gpio_get_ro,
- 	.set_ios		= mvsd_set_ios,
- 	.enable_sdio_irq	= mvsd_enable_sdio_irq,
- };
-@@ -793,15 +779,7 @@ static int __init mvsd_probe(struct plat
- 	if (!host->gpio_card_detect)
- 		mmc->caps |= MMC_CAP_NEEDS_POLL;
- 
--	if (mvsd_data->gpio_write_protect) {
--		ret = devm_gpio_request_one(&pdev->dev,
--					    mvsd_data->gpio_write_protect,
--					    GPIOF_IN, DRIVER_NAME " wp");
--		if (ret == 0) {
--			host->gpio_write_protect =
--				mvsd_data->gpio_write_protect;
--		}
--	}
-+	mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
- 
- 	setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host);
- 	platform_set_drvdata(pdev, mmc);
-@@ -820,6 +798,7 @@ static int __init mvsd_probe(struct plat
- 
- out:
- 	if (mmc) {
-+		mmc_gpio_free_ro(mmc);
- 		if (!IS_ERR(host->clk))
- 			clk_disable_unprepare(host->clk);
- 		mmc_free_host(mmc);
-@@ -834,6 +813,7 @@ static int __exit mvsd_remove(struct pla
- 
- 	struct mvsd_host *host = mmc_priv(mmc);
- 
-+	mmc_gpio_free_ro(mmc);
- 	mmc_remove_host(mmc);
- 	del_timer_sync(&host->timer);
- 	mvsd_power_down(host);
diff --git a/target/linux/mvebu/patches-3.8/007-mmc_mvsdio_use_slot_gpio_for_cd.patch b/target/linux/mvebu/patches-3.8/007-mmc_mvsdio_use_slot_gpio_for_cd.patch
deleted file mode 100644
index a1b3b87..0000000
--- a/target/linux/mvebu/patches-3.8/007-mmc_mvsdio_use_slot_gpio_for_cd.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From patchwork Wed Jan 16 13:13:58 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [3/5] mmc: mvsdio: use slot-gpio for card detect gpio
-Date: Wed, 16 Jan 2013 13:13:58 -0000
-From: Andrew Lunn <andrew@lunn.ch>
-X-Patchwork-Id: 1987941
-Message-Id: <1358342040-7130-4-git-send-email-andrew@lunn.ch>
-To: Jason Cooper <jason@lakedaemon.net>
-Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
- linux-mmc@vger.kernel.org, linux@arm.linux.org.uk,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
- Andrew Lunn <andrew@lunn.ch>
-
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice
-set of helper functions to simplify the management of the card detect
-GPIO in MMC host drivers. This patch migrates the mvsdio driver to
-using those helpers, which will make the ->probe() code simpler, and
-therefore ease the process of adding a Device Tree binding for this
-driver.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Stefan Peter <s.peter@mpl.ch>
-Tested-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
----
-drivers/mmc/host/mvsdio.c |   39 +++++++++------------------------------
- 1 file changed, 9 insertions(+), 30 deletions(-)
-
---- a/drivers/mmc/host/mvsdio.c
-+++ b/drivers/mmc/host/mvsdio.c
-@@ -52,7 +52,6 @@ struct mvsd_host {
- 	struct mmc_host *mmc;
- 	struct device *dev;
- 	struct clk *clk;
--	int gpio_card_detect;
- };
- 
- #define mvsd_write(offs, val)	writel(val, iobase + (offs))
-@@ -538,13 +537,6 @@ static void mvsd_timeout_timer(unsigned
- 		mmc_request_done(host->mmc, mrq);
- }
- 
--static irqreturn_t mvsd_card_detect_irq(int irq, void *dev)
--{
--	struct mvsd_host *host = dev;
--	mmc_detect_change(host->mmc, msecs_to_jiffies(100));
--	return IRQ_HANDLED;
--}
--
- static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable)
- {
- 	struct mvsd_host *host = mmc_priv(mmc);
-@@ -757,26 +749,11 @@ static int __init mvsd_probe(struct plat
- 	if (!IS_ERR(host->clk))
- 		clk_prepare_enable(host->clk);
- 
--	if (mvsd_data->gpio_card_detect) {
--		ret = devm_gpio_request_one(&pdev->dev,
--					    mvsd_data->gpio_card_detect,
--					    GPIOF_IN, DRIVER_NAME " cd");
--		if (ret == 0) {
--			irq = gpio_to_irq(mvsd_data->gpio_card_detect);
--			ret = devm_request_irq(&pdev->dev, irq,
--					       mvsd_card_detect_irq,
--					       IRQ_TYPE_EDGE_RISING |
--					       IRQ_TYPE_EDGE_FALLING,
--					       DRIVER_NAME " cd", host);
--			if (ret == 0)
--				host->gpio_card_detect =
--					mvsd_data->gpio_card_detect;
--			else
--				devm_gpio_free(&pdev->dev,
--					       mvsd_data->gpio_card_detect);
--		}
--	}
--	if (!host->gpio_card_detect)
-+	if (gpio_is_valid(mvsd_data->gpio_card_detect)) {
-+		ret = mmc_gpio_request_cd(mmc, mvsd_data->gpio_card_detect);
-+		if (ret)
-+			goto out;
-+	} else
- 		mmc->caps |= MMC_CAP_NEEDS_POLL;
- 
- 	mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
-@@ -789,15 +766,16 @@ static int __init mvsd_probe(struct plat
- 
- 	pr_notice("%s: %s driver initialized, ",
- 			   mmc_hostname(mmc), DRIVER_NAME);
--	if (host->gpio_card_detect)
-+	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
- 		printk("using GPIO %d for card detection\n",
--		       host->gpio_card_detect);
-+		       mvsd_data->gpio_card_detect);
- 	else
- 		printk("lacking card detect (fall back to polling)\n");
- 	return 0;
- 
- out:
- 	if (mmc) {
-+		mmc_gpio_free_cd(mmc);
- 		mmc_gpio_free_ro(mmc);
- 		if (!IS_ERR(host->clk))
- 			clk_disable_unprepare(host->clk);
-@@ -813,6 +791,7 @@ static int __exit mvsd_remove(struct pla
- 
- 	struct mvsd_host *host = mmc_priv(mmc);
- 
-+	mmc_gpio_free_cd(mmc);
- 	mmc_gpio_free_ro(mmc);
- 	mmc_remove_host(mmc);
- 	del_timer_sync(&host->timer);
diff --git a/target/linux/mvebu/patches-3.8/008-mmc_mvsdio_implement_a_device_tree_binding.patch b/target/linux/mvebu/patches-3.8/008-mmc_mvsdio_implement_a_device_tree_binding.patch
deleted file mode 100644
index baec5a1..0000000
--- a/target/linux/mvebu/patches-3.8/008-mmc_mvsdio_implement_a_device_tree_binding.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From patchwork Wed Jan 16 13:13:59 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [4/5] mmc: mvsdio: implement a Device Tree binding
-Date: Wed, 16 Jan 2013 13:13:59 -0000
-From: Andrew Lunn <andrew@lunn.ch>
-X-Patchwork-Id: 1987921
-Message-Id: <1358342040-7130-5-git-send-email-andrew@lunn.ch>
-To: Jason Cooper <jason@lakedaemon.net>
-Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
- linux-mmc@vger.kernel.org, linux@arm.linux.org.uk,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
- Andrew Lunn <andrew@lunn.ch>
-
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-This patch adds a simple Device Tree binding for the mvsdio driver, as
-well as the necessary documentation for it. Compatibility with non-DT
-platforms is preserved, by keeping the platform_data based
-initialization.
-
-We introduce a small difference between non-DT and DT platforms: DT
-platforms are required to provide a clocks = <...> property, which the
-driver uses to get the frequency of the clock that goes to the SDIO
-IP. The behaviour on non-DT platforms is kept unchanged: a clock
-reference is not mandatory, but the clock frequency must be passed in
-the "clock" field of the mvsdio_platform_data structure.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Stefan Peter <s.peter@mpl.ch>
-Tested-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
----
-.../devicetree/bindings/mmc/orion-sdio.txt         |   17 ++++++
- drivers/mmc/host/mvsdio.c                          |   62 +++++++++++++++-----
- 2 files changed, 64 insertions(+), 15 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
-@@ -0,0 +1,17 @@
-+* Marvell orion-sdio controller
-+
-+This file documents differences between the core properties in mmc.txt
-+and the properties used by the orion-sdio driver.
-+
-+- compatible: Should be "marvell,orion-sdio"
-+- clocks: reference to the clock of the SDIO interface
-+
-+Example:
-+
-+	mvsdio@d00d4000 {
-+		compatible = "marvell,orion-sdio";
-+		reg = <0xd00d4000 0x200>;
-+		interrupts = <54>;
-+		clocks = <&gateclk 17>;
-+		status = "disabled";
-+	};
---- a/drivers/mmc/host/mvsdio.c
-+++ b/drivers/mmc/host/mvsdio.c
-@@ -21,6 +21,8 @@
- #include <linux/irq.h>
- #include <linux/clk.h>
- #include <linux/gpio.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_irq.h>
- #include <linux/mmc/host.h>
- #include <linux/mmc/slot-gpio.h>
- 
-@@ -681,17 +683,17 @@ mv_conf_mbus_windows(struct mvsd_host *h
- 
- static int __init mvsd_probe(struct platform_device *pdev)
- {
-+	struct device_node *np = pdev->dev.of_node;
- 	struct mmc_host *mmc = NULL;
- 	struct mvsd_host *host = NULL;
--	const struct mvsdio_platform_data *mvsd_data;
- 	const struct mbus_dram_target_info *dram;
- 	struct resource *r;
- 	int ret, irq;
-+	int gpio_card_detect, gpio_write_protect;
- 
- 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	irq = platform_get_irq(pdev, 0);
--	mvsd_data = pdev->dev.platform_data;
--	if (!r || irq < 0 || !mvsd_data)
-+	if (!r || irq < 0)
- 		return -ENXIO;
- 
- 	mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
-@@ -703,8 +705,37 @@ static int __init mvsd_probe(struct plat
- 	host = mmc_priv(mmc);
- 	host->mmc = mmc;
- 	host->dev = &pdev->dev;
--	host->base_clock = mvsd_data->clock / 2;
--	host->clk = ERR_PTR(-EINVAL);
-+
-+	/* Some non-DT platforms do not pass a clock, and the clock
-+	   frequency is passed through platform_data. On DT platforms,
-+	   a clock must always be passed, even if there is no gatable
-+	   clock associated to the SDIO interface (it can simply be a
-+	   fixed rate clock). */
-+	host->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (!IS_ERR(host->clk))
-+		clk_prepare_enable(host->clk);
-+
-+	if (np) {
-+		if (IS_ERR(host->clk)) {
-+			dev_err(&pdev->dev, "DT platforms must have a clock associated\n");
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+
-+		host->base_clock = clk_get_rate(host->clk) / 2;
-+		gpio_card_detect = of_get_named_gpio(np, "cd-gpios", 0);
-+		gpio_write_protect = of_get_named_gpio(np, "wp-gpios", 0);
-+	} else {
-+		const struct mvsdio_platform_data *mvsd_data;
-+		mvsd_data = pdev->dev.platform_data;
-+		if (!mvsd_data) {
-+			ret = -ENXIO;
-+			goto out;
-+		}
-+		host->base_clock = mvsd_data->clock / 2;
-+		gpio_card_detect = mvsd_data->gpio_card_detect;
-+		gpio_write_protect = mvsd_data->gpio_write_protect;
-+	}
- 
- 	mmc->ops = &mvsd_ops;
- 
-@@ -743,20 +774,14 @@ static int __init mvsd_probe(struct plat
- 		goto out;
- 	}
- 
--	/* Not all platforms can gate the clock, so it is not
--	   an error if the clock does not exists. */
--	host->clk = devm_clk_get(&pdev->dev, NULL);
--	if (!IS_ERR(host->clk))
--		clk_prepare_enable(host->clk);
--
--	if (gpio_is_valid(mvsd_data->gpio_card_detect)) {
--		ret = mmc_gpio_request_cd(mmc, mvsd_data->gpio_card_detect);
-+	if (gpio_is_valid(gpio_card_detect)) {
-+		ret = mmc_gpio_request_cd(mmc, gpio_card_detect);
- 		if (ret)
- 			goto out;
- 	} else
- 		mmc->caps |= MMC_CAP_NEEDS_POLL;
- 
--	mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
-+	mmc_gpio_request_ro(mmc, gpio_write_protect);
- 
- 	setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host);
- 	platform_set_drvdata(pdev, mmc);
-@@ -768,7 +793,7 @@ static int __init mvsd_probe(struct plat
- 			   mmc_hostname(mmc), DRIVER_NAME);
- 	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
- 		printk("using GPIO %d for card detection\n",
--		       mvsd_data->gpio_card_detect);
-+		       gpio_card_detect);
- 	else
- 		printk("lacking card detect (fall back to polling)\n");
- 	return 0;
-@@ -832,12 +857,19 @@ static int mvsd_resume(struct platform_d
- #define mvsd_resume	NULL
- #endif
- 
-+static const struct of_device_id mvsdio_dt_ids[] = {
-+	{ .compatible = "marvell,orion-sdio" },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mvsdio_dt_ids);
-+
- static struct platform_driver mvsd_driver = {
- 	.remove		= __exit_p(mvsd_remove),
- 	.suspend	= mvsd_suspend,
- 	.resume		= mvsd_resume,
- 	.driver		= {
- 		.name	= DRIVER_NAME,
-+		.of_match_table = mvsdio_dt_ids,
- 	},
- };
- 
diff --git a/target/linux/mvebu/patches-3.8/009-mmc_mvsdio_add_pinctrl.patch b/target/linux/mvebu/patches-3.8/009-mmc_mvsdio_add_pinctrl.patch
deleted file mode 100644
index 394ca5b..0000000
--- a/target/linux/mvebu/patches-3.8/009-mmc_mvsdio_add_pinctrl.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From patchwork Wed Jan 16 13:14:00 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [5/5] mmc: mvsdio: add pinctrl integration
-Date: Wed, 16 Jan 2013 13:14:00 -0000
-From: Andrew Lunn <andrew@lunn.ch>
-X-Patchwork-Id: 1987901
-Message-Id: <1358342040-7130-6-git-send-email-andrew@lunn.ch>
-To: Jason Cooper <jason@lakedaemon.net>
-Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
- linux-mmc@vger.kernel.org, linux@arm.linux.org.uk,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
- Andrew Lunn <andrew@lunn.ch>
-
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-On many Marvell SoCs, the pins used for the SDIO interface are part of
-the MPP pins, that are muxable pins. In order to get the muxing of
-those pins correct, this commit integrates the mvsdio driver with the
-pinctrl infrastructure by calling devm_pinctrl_get_select_default()
-during ->probe().
-
-Note that we permit this function to fail because not all Marvell
-platforms have yet been fully converted to using the pinctrl
-infrastructure.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Stefan Peter <s.peter@mpl.ch>
-Tested-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
----
-drivers/mmc/host/mvsdio.c |    6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mmc/host/mvsdio.c
-+++ b/drivers/mmc/host/mvsdio.c
-@@ -25,6 +25,7 @@
- #include <linux/of_irq.h>
- #include <linux/mmc/host.h>
- #include <linux/mmc/slot-gpio.h>
-+#include <linux/pinctrl/consumer.h>
- 
- #include <asm/sizes.h>
- #include <asm/unaligned.h>
-@@ -690,6 +691,7 @@ static int __init mvsd_probe(struct plat
- 	struct resource *r;
- 	int ret, irq;
- 	int gpio_card_detect, gpio_write_protect;
-+	struct pinctrl *pinctrl;
- 
- 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	irq = platform_get_irq(pdev, 0);
-@@ -706,6 +708,10 @@ static int __init mvsd_probe(struct plat
- 	host->mmc = mmc;
- 	host->dev = &pdev->dev;
- 
-+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-+	if (IS_ERR(pinctrl))
-+		dev_warn(&pdev->dev, "no pins associated\n");
-+
- 	/* Some non-DT platforms do not pass a clock, and the clock
- 	   frequency is passed through platform_data. On DT platforms,
- 	   a clock must always be passed, even if there is no gatable
diff --git a/target/linux/mvebu/patches-3.8/010-arm_mvebu_add_dt_info_a370.patch b/target/linux/mvebu/patches-3.8/010-arm_mvebu_add_dt_info_a370.patch
deleted file mode 100644
index bf4d9d4..0000000
--- a/target/linux/mvebu/patches-3.8/010-arm_mvebu_add_dt_info_a370.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Now that the mvsdio MMC driver has a Device Tree binding, we add the
-Device Tree informations to describe the SDIO interface available in
-the Armada 370/XP SoCs.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-xp.dtsi |    8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -131,6 +131,14 @@
- 			clocks = <&coreclk 0>;
- 			status = "disabled";
- 		};
-+
-+		mvsdio@d00d4000 {
-+			compatible = "marvell,orion-sdio";
-+			reg = <0xd00d4000 0x200>;
-+			interrupts = <54>;
-+			clocks = <&gateclk 17>;
-+			status = "disabled";
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch b/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch
deleted file mode 100644
index 4072ae5..0000000
--- a/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-The SDIO interface is available either on pins MPP9/11/12/13/14/15 or
-MPP47/48/49/50/51/52 on the Armada 370. Even though all combinations
-are potentially possible, those two muxing options are the most
-probable ones, so we provide those at the SoC level .dtsi file.
-
-In practice, in turns out the Armada 370 DB board uses the former,
-while the Armada 370 Mirabox uses the latter.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370.dtsi |   12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -47,6 +47,18 @@
- 		pinctrl {
- 			compatible = "marvell,mv88f6710-pinctrl";
- 			reg = <0xd0018000 0x38>;
-+
-+			sdio_pins1: sdio-pins1 {
-+			      marvell,pins = "mpp9",  "mpp11", "mpp12",
-+					     "mpp13", "mpp14", "mpp15";
-+			      marvell,function = "sd0";
-+			};
-+
-+			sdio_pins2: sdio-pins2 {
-+			      marvell,pins = "mpp47", "mpp48", "mpp49",
-+					     "mpp50", "mpp51", "mpp52";
-+			      marvell,function = "sd0";
-+			};
- 	        };
- 
- 		gpio0: gpio@d0018100 {
diff --git a/target/linux/mvebu/patches-3.8/012-arm_mvebu_add_pin_mux_options_axp.patch b/target/linux/mvebu/patches-3.8/012-arm_mvebu_add_pin_mux_options_axp.patch
deleted file mode 100644
index 716971d..0000000
--- a/target/linux/mvebu/patches-3.8/012-arm_mvebu_add_pin_mux_options_axp.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-The SDIO interface is only available on pins MPP30/31/32/33/34/35 on
-the various Armada XP variants, so we provide a pin muxing option for
-this in the Armada XP .dtsi files.
-
-Even though those muxing options are the same for MV78230, MV78260 and
-MV78460, we keep them in each .dtsi file, because the number of pins,
-and therefore the declaration of the pinctrl node, is different for
-each SoC variant.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-mv78230.dtsi |    6 ++++++
- arch/arm/boot/dts/armada-xp-mv78260.dtsi |    6 ++++++
- arch/arm/boot/dts/armada-xp-mv78460.dtsi |    6 ++++++
- 3 files changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -47,6 +47,12 @@
- 		pinctrl {
- 			compatible = "marvell,mv78230-pinctrl";
- 			reg = <0xd0018000 0x38>;
-+
-+			sdio_pins: sdio-pins {
-+				marvell,pins = "mpp30", "mpp31", "mpp32",
-+					       "mpp33", "mpp34", "mpp35";
-+				marvell,function = "sd0";
-+			};
- 		};
- 
- 		gpio0: gpio@d0018100 {
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -48,6 +48,12 @@
- 		pinctrl {
- 			compatible = "marvell,mv78260-pinctrl";
- 			reg = <0xd0018000 0x38>;
-+
-+			sdio_pins: sdio-pins {
-+				marvell,pins = "mpp30", "mpp31", "mpp32",
-+					       "mpp33", "mpp34", "mpp35";
-+				marvell,function = "sd0";
-+			};
- 		};
- 
- 		gpio0: gpio@d0018100 {
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -63,6 +63,12 @@
- 		pinctrl {
- 			compatible = "marvell,mv78460-pinctrl";
- 			reg = <0xd0018000 0x38>;
-+
-+			sdio_pins: sdio-pins {
-+				marvell,pins = "mpp30", "mpp31", "mpp32",
-+					       "mpp33", "mpp34", "mpp35";
-+				marvell,function = "sd0";
-+			};
- 		};
- 
- 		gpio0: gpio@d0018100 {
diff --git a/target/linux/mvebu/patches-3.8/013-arm_mvebu_enable_sd_cart_slot_axp_db.patch b/target/linux/mvebu/patches-3.8/013-arm_mvebu_enable_sd_cart_slot_axp_db.patch
deleted file mode 100644
index 5a6faf9..0000000
--- a/target/linux/mvebu/patches-3.8/013-arm_mvebu_enable_sd_cart_slot_axp_db.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-The Armada XP DB evaluation board has one SD card slot, directly
-connected to the SDIO IP of the SoC, so we enable this
-IP. Unfortunately, there are no GPIOs for card-detect and
-write-protect.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-db.dts |    7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/armada-xp-db.dts
-+++ b/arch/arm/boot/dts/armada-xp-db.dts
-@@ -90,5 +90,12 @@
- 			phy = <&phy3>;
- 			phy-mode = "sgmii";
- 		};
-+
-+		mvsdio@d00d4000 {
-+			pinctrl-0 = <&sdio_pins>;
-+			pinctrl-names = "default";
-+			status = "okay";
-+			/* No CD or WP GPIOs */
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch b/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch
deleted file mode 100644
index d921416..0000000
--- a/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-The Armada XP DB evaluation board has one SD card slot, directly
-connected to the SDIO IP of the SoC, so we add a device tree
-description for it.
-
-However, in the default configuration of the board, the SD card slot
-is not usable: the connector plugged into CON40 must be changed
-against a different one, provided with the board by the
-manufacturer. Since such a manual modification of the hardware is
-needed, we did not enable the SDIO interface by default, and left it
-to the board user to modify the Device Tree if needed. Since this
-board is really only an evaluation board for developers and not a
-final product, it is not too bad.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-db.dts |   15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-db.dts
-+++ b/arch/arm/boot/dts/armada-370-db.dts
-@@ -59,5 +59,20 @@
- 			phy = <&phy1>;
- 			phy-mode = "rgmii-id";
- 		};
-+
-+		mvsdio@d00d4000 {
-+			pinctrl-0 = <&sdio_pins1>;
-+			pinctrl-names = "default";
-+			/*
-+			 * This device is disabled by default, because
-+			 * using the SD card connector requires
-+			 * changing the default CON40 connector
-+			 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-+			 * different connector
-+			 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-+			 */
-+			status = "disabled";
-+			/* No CD or WP GPIOs */
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/015-arm_mvebu_enable_sd_card_slot_mirabox.patch b/target/linux/mvebu/patches-3.8/015-arm_mvebu_enable_sd_card_slot_mirabox.patch
deleted file mode 100644
index 0cf6ee4..0000000
--- a/target/linux/mvebu/patches-3.8/015-arm_mvebu_enable_sd_card_slot_mirabox.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-The Globalscale Mirabox uses the SDIO interface of the Armada 370 to
-connect to a Wifi/Bluetooth SD8787 chip, so we enable the SDIO
-interface of this board in its Device Tree file.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-mirabox.dts |   10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-mirabox.dts
-+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
-@@ -52,5 +52,15 @@
- 			phy = <&phy1>;
- 			phy-mode = "rgmii-id";
- 		};
-+
-+		mvsdio@d00d4000 {
-+			pinctrl-0 = <&sdio_pins2>;
-+			pinctrl-names = "default";
-+			status = "okay";
-+			/*
-+			 * No CD or WP GPIOs: SDIO interface used for
-+			 * Wifi/Bluetooth chip
-+			 */
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/019-rtc_add_support_for_rtc_mv_for_mvebu.patch b/target/linux/mvebu/patches-3.8/019-rtc_add_support_for_rtc_mv_for_mvebu.patch
deleted file mode 100644
index 373058a..0000000
--- a/target/linux/mvebu/patches-3.8/019-rtc_add_support_for_rtc_mv_for_mvebu.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-The Armada 370 and Armada XP Socs have the same controller that the
-one used in the orion platforms. This patch enables the selection of
-rtc-mv with mvebu platforms.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Acked-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/rtc/Kconfig |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -1041,7 +1041,7 @@ config RTC_DRV_TX4939
- 
- config RTC_DRV_MV
- 	tristate "Marvell SoC RTC"
--	depends on ARCH_KIRKWOOD || ARCH_DOVE
-+	depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU
- 	help
- 	  If you say yes here you will get support for the in-chip RTC
- 	  that can be found in some of Marvell's SoC devices, such as
diff --git a/target/linux/mvebu/patches-3.8/020-arm_mvebu_add_rtc_support_for_a370_and_axp.patch b/target/linux/mvebu/patches-3.8/020-arm_mvebu_add_rtc_support_for_a370_and_axp.patch
deleted file mode 100644
index 307e815..0000000
--- a/target/linux/mvebu/patches-3.8/020-arm_mvebu_add_rtc_support_for_a370_and_axp.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-The Armada 370 and Armada XP Socs have the same controller that the
-one used in the orion platforms. This patch updates the device tree
-for these SoCs.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Acked-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-370-xp.dtsi |    6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -139,6 +139,12 @@
- 			clocks = <&gateclk 17>;
- 			status = "disabled";
- 		};
-+
-+		rtc@10300 {
-+			compatible = "marvell,orion-rtc";
-+			reg = <0xd0010300 0x20>;
-+			interrupts = <50>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-3.8/021-arm_mvebu_add_rd_a370_a1_dts.patch b/target/linux/mvebu/patches-3.8/021-arm_mvebu_add_rd_a370_a1_dts.patch
deleted file mode 100644
index 6f52500..0000000
--- a/target/linux/mvebu/patches-3.8/021-arm_mvebu_add_rd_a370_a1_dts.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From fcc7654b592cb80cfb33c509db1005ce9252192b Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 9 Jan 2013 20:39:55 +0100
-Subject: [PATCH] arm: mvebu: add DTS file for Marvell RD-A370-A1 board
-
-This patch adds the DTS file to support the Marvell RD-A370-A1
-(Reference Design board) also known as RD-88F6710 board. It is almost
-entirely similar to the DB-A370 board except that the first Ethernet PHY
-is SGMII-wired and the second is a switch which is RGMII-wired.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/arm/boot/dts/Makefile          |    1 +
- arch/arm/boot/dts/armada-370-rd.dts |   61 +++++++++++++++++++++++++++++++++++
- 2 files changed, 62 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-370-rd.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.d
- 	msm8960-cdp.dtb
- dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
- 	armada-370-mirabox.dtb \
-+	armada-370-rd.dtb \
- 	armada-xp-db.dtb \
- 	armada-xp-openblocks-ax3-4.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-370-rd.dts
-@@ -0,0 +1,61 @@
-+/*
-+ * Device Tree file for Marvell Armada 370 Reference Design board
-+ * (RD-88F6710-A1)
-+ *
-+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
-+ *
-+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+/include/ "armada-370.dtsi"
-+
-+/ {
-+	model = "Marvell Armada 370 Reference Design";
-+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200 earlyprintk";
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x20000000>; /* 512 MB */
-+	};
-+
-+	soc {
-+		serial@d0012000 {
-+			clock-frequency = <200000000>;
-+			status = "okay";
-+		};
-+		sata@d00a0000 {
-+			nr-ports = <2>;
-+			status = "okay";
-+		};
-+
-+		mdio {
-+			phy0: ethernet-phy@0 {
-+				reg = <0>;
-+			};
-+
-+			phy1: ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+		};
-+
-+		ethernet@d0070000 {
-+			status = "okay";
-+			phy = <&phy0>;
-+			phy-mode = "sgmii";
-+		};
-+		ethernet@d0074000 {
-+			status = "okay";
-+			phy = <&phy1>;
-+			phy-mode = "rgmii-id";
-+		};
-+	};
-+};
diff --git a/target/linux/mvebu/patches-3.8/022-arm_mvebu_enable_sd_card_slot_a370_rd.patch b/target/linux/mvebu/patches-3.8/022-arm_mvebu_enable_sd_card_slot_a370_rd.patch
deleted file mode 100644
index 439711a..0000000
--- a/target/linux/mvebu/patches-3.8/022-arm_mvebu_enable_sd_card_slot_a370_rd.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 883b6ab543ea3f893447307c0e757668ca1b5396 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 9 Jan 2013 20:50:04 +0100
-Subject: [PATCH] arm: mvebu: add SDIO support to Armada 370 Reference Design
-
-This patch enables the use of the SDIO controller on the Armada 370
-Reference Design board.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/arm/boot/dts/armada-370-rd.dts |    6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-rd.dts
-+++ b/arch/arm/boot/dts/armada-370-rd.dts
-@@ -57,5 +57,11 @@
- 			phy = <&phy1>;
- 			phy-mode = "rgmii-id";
- 		};
-+
-+		mvsdio@d00d4000 {
-+			pinctrl-0 = <&sdio_pins1>;
-+			pinctrl-names = "default";
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/023-arm_mvebu_add_support_for_usb_host.patch b/target/linux/mvebu/patches-3.8/023-arm_mvebu_add_support_for_usb_host.patch
deleted file mode 100644
index 1484c08..0000000
--- a/target/linux/mvebu/patches-3.8/023-arm_mvebu_add_support_for_usb_host.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
-This patch adds support for this controller in Armada 370
-and Armada XP SoC common device tree files.
-
-Cc: Lior Amsalem <alior@marvell.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-xp.dtsi |   15 +++++++++++++++
- arch/arm/boot/dts/armada-370.dtsi    |    9 +++++++++
- arch/arm/boot/dts/armada-xp.dtsi     |   17 +++++++++++++++++
- arch/arm/mach-mvebu/Kconfig          |    1 +
- 4 files changed, 42 insertions(+), 0 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -145,6 +145,21 @@
- 			reg = <0xd0010300 0x20>;
- 			interrupts = <50>;
- 		};
-+
-+		usb@d0050000 {
-+			compatible = "marvell,orion-ehci";
-+			reg = <0xd0050000 0x500>;
-+			interrupts = <45>;
-+			status = "disabled";
-+		};
-+
-+		usb@d0051000 {
-+			compatible = "marvell,orion-ehci";
-+			reg = <0xd0051000 0x500>;
-+			interrupts = <46>;
-+			status = "disabled";
-+		};
-+
- 	};
- };
- 
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -144,5 +144,14 @@
- 				dmacap,memset;
- 			};
- 		};
-+
-+		usb@d0050000 {
-+			clocks = <&coreclk 0>;
-+		};
-+
-+		usb@d0051000 {
-+			clocks = <&coreclk 0>;
-+		};
-+
- 	};
- };
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -134,5 +134,22 @@
- 				dmacap,memset;
- 			};
- 		};
-+
-+		usb@d0050000 {
-+			clocks = <&gateclk 18>;
-+		};
-+
-+		usb@d0051000 {
-+			clocks = <&gateclk 19>;
-+		};
-+
-+		usb@d0052000 {
-+			compatible = "marvell,orion-ehci";
-+			reg = <0xd0052000 0x500>;
-+			interrupts = <47>;
-+			clocks = <&gateclk 20>;
-+			status = "disabled";
-+		};
-+
- 	};
- };
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -24,6 +24,7 @@ config MACH_ARMADA_370_XP
- 	select HAVE_SMP
- 	select CACHE_L2X0
- 	select CPU_PJ4B
-+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
- 
- config MACH_ARMADA_370
- 	bool "Marvell Armada 370 boards"
diff --git a/target/linux/mvebu/patches-3.8/024-arm_mvebu_enable_usb_a370.patch b/target/linux/mvebu/patches-3.8/024-arm_mvebu_enable_usb_a370.patch
deleted file mode 100644
index 1a20a14..0000000
--- a/target/linux/mvebu/patches-3.8/024-arm_mvebu_enable_usb_a370.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Cc: Lior Amsalem <alior@marvell.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-db.dts |    8 ++++++++
- 1 files changed, 8 insertions(+), 0 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370-db.dts
-+++ b/arch/arm/boot/dts/armada-370-db.dts
-@@ -74,5 +74,13 @@
- 			status = "disabled";
- 			/* No CD or WP GPIOs */
- 		};
-+
-+		usb@d0050000 {
-+			status = "okay";
-+		};
-+
-+		usb@d0051000 {
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/025-arm_mvebu_enable_usb_a370_mirabox.patch b/target/linux/mvebu/patches-3.8/025-arm_mvebu_enable_usb_a370_mirabox.patch
deleted file mode 100644
index 82d059e..0000000
--- a/target/linux/mvebu/patches-3.8/025-arm_mvebu_enable_usb_a370_mirabox.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Cc: Lior Amsalem <alior@marvell.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-mirabox.dts |    8 ++++++++
- 1 files changed, 8 insertions(+), 0 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370-mirabox.dts
-+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
-@@ -62,5 +62,13 @@
- 			 * Wifi/Bluetooth chip
- 			 */
- 		};
-+
-+		usb@d0050000 {
-+			status = "okay";
-+		};
-+
-+		usb@d0051000 {
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/026-arm_mvebu_enale_usb_axp.patch b/target/linux/mvebu/patches-3.8/026-arm_mvebu_enale_usb_axp.patch
deleted file mode 100644
index f3851b0..0000000
--- a/target/linux/mvebu/patches-3.8/026-arm_mvebu_enale_usb_axp.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-Cc: Lior Amsalem <alior@marvell.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-db.dts |   12 ++++++++++++
- 1 files changed, 12 insertions(+), 0 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-db.dts
-+++ b/arch/arm/boot/dts/armada-xp-db.dts
-@@ -97,5 +97,17 @@
- 			status = "okay";
- 			/* No CD or WP GPIOs */
- 		};
-+
-+		usb@d0050000 {
-+			status = "okay";
-+		};
-+
-+		usb@d0051000 {
-+			status = "okay";
-+		};
-+
-+		usb@d0052000 {
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/027-arm_mvebu_enable_axp_openblocks.patch b/target/linux/mvebu/patches-3.8/027-arm_mvebu_enable_axp_openblocks.patch
deleted file mode 100644
index 2078260..0000000
--- a/target/linux/mvebu/patches-3.8/027-arm_mvebu_enable_axp_openblocks.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Cc: Lior Amsalem <alior@marvell.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts |    9 +++++++++
- 1 files changed, 9 insertions(+), 0 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-@@ -121,5 +121,14 @@
- 			nr-ports = <2>;
- 			status = "okay";
- 		};
-+		usb@d0050000 {
-+			status = "okay";
-+		};
-+		usb@d0051000 {
-+			status = "okay";
-+		};
-+		usb@d0052000 {
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/028-lib_devres_dont_enclose_pcim.patch b/target/linux/mvebu/patches-3.8/028-lib_devres_dont_enclose_pcim.patch
deleted file mode 100644
index 3cde2a3..0000000
--- a/target/linux/mvebu/patches-3.8/028-lib_devres_dont_enclose_pcim.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-The pcim_*() functions are used by the libata-sff subsystem, and this
-subsystem is used for many SATA drivers on ARM platforms that do not
-necessarily have I/O ports.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
-Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-Cc: Yinghai Lu <yinghai@kernel.org>
-Cc: linux-kernel@vger.kernel.org
----
- lib/devres.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/lib/devres.c
-+++ b/lib/devres.c
-@@ -226,6 +226,7 @@ void devm_ioport_unmap(struct device *de
- 			       devm_ioport_map_match, (void *)addr));
- }
- EXPORT_SYMBOL(devm_ioport_unmap);
-+#endif /* CONFIG_HAS_IOPORT */
- 
- #ifdef CONFIG_PCI
- /*
-@@ -431,4 +432,3 @@ void pcim_iounmap_regions(struct pci_dev
- }
- EXPORT_SYMBOL(pcim_iounmap_regions);
- #endif /* CONFIG_PCI */
--#endif /* CONFIG_HAS_IOPORT */
diff --git a/target/linux/mvebu/patches-3.8/029-clk_mvebu_create_parent_child_relation.patch b/target/linux/mvebu/patches-3.8/029-clk_mvebu_create_parent_child_relation.patch
deleted file mode 100644
index 2cccc03..0000000
--- a/target/linux/mvebu/patches-3.8/029-clk_mvebu_create_parent_child_relation.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-The Armada 370 has two gatable clocks for each PCIe interface, and we
-want both of them to be enabled. We therefore make one of the two
-clocks a child of the other, as we did for the sataX and sataXlnk
-clocks on Armada XP.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Mike Turquette <mturquette@linaro.org>
----
- drivers/clk/mvebu/clk-gating-ctrl.c |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/mvebu/clk-gating-ctrl.c
-+++ b/drivers/clk/mvebu/clk-gating-ctrl.c
-@@ -119,8 +119,8 @@ static const struct mvebu_soc_descr __in
- 	{ "pex1_en", NULL,  2 },
- 	{ "ge1", NULL, 3 },
- 	{ "ge0", NULL, 4 },
--	{ "pex0", NULL, 5 },
--	{ "pex1", NULL, 9 },
-+	{ "pex0", "pex0_en", 5 },
-+	{ "pex1", "pex1_en", 9 },
- 	{ "sata0", NULL, 15 },
- 	{ "sdio", NULL, 17 },
- 	{ "tdm", NULL, 25 },
diff --git a/target/linux/mvebu/patches-3.8/030-arm_plat_orion_introduce_win_ctrl_enable.patch b/target/linux/mvebu/patches-3.8/030-arm_plat_orion_introduce_win_ctrl_enable.patch
deleted file mode 100644
index 9a237ec..0000000
--- a/target/linux/mvebu/patches-3.8/030-arm_plat_orion_introduce_win_ctrl_enable.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-Instead of hardcoding "1" as being the bit value to enable an address
-decoding window, introduce and use a WIN_CTRL_ENABLE definition.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/plat-orion/addr-map.c |    4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/arch/arm/plat-orion/addr-map.c
-+++ b/arch/arm/plat-orion/addr-map.c
-@@ -38,6 +38,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-  * CPU Address Decode Windows registers
-  */
- #define WIN_CTRL_OFF		0x0000
-+#define   WIN_CTRL_ENABLE       BIT(0)
- #define WIN_BASE_OFF		0x0004
- #define WIN_REMAP_LO_OFF	0x0008
- #define WIN_REMAP_HI_OFF	0x000c
-@@ -79,7 +80,8 @@ void __init orion_setup_cpu_win(const st
- 	}
- 
- 	base_high = base & 0xffff0000;
--	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) |
-+		WIN_CTRL_ENABLE;
- 
- 	writel(base_high, addr + WIN_BASE_OFF);
- 	writel(ctrl, addr + WIN_CTRL_OFF);
diff --git a/target/linux/mvebu/patches-3.8/031-arm_plat_orion_refactor.patch b/target/linux/mvebu/patches-3.8/031-arm_plat_orion_refactor.patch
deleted file mode 100644
index fe9f628..0000000
--- a/target/linux/mvebu/patches-3.8/031-arm_plat_orion_refactor.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-In the address decoding code, the orion_disable_wins() function is
-used at boot time to disable all address decoding windows, before
-configuring only the ones that are needed. This allows to make sure
-that no configuration is left from the bootloader.
-
-As a preparation for the introduction of address decoding window
-allocation/deallocation function, we refactor this function into an
-orion_disable_cpu_win() which disables a single window.
-
-The orion_config_wins() function is changed to call
-orion_disable_cpu_win() in a loop, to preserve an identical behavior.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/plat-orion/addr-map.c |   35 +++++++++++++++++------------------
- 1 file changed, 17 insertions(+), 18 deletions(-)
-
---- a/arch/arm/plat-orion/addr-map.c
-+++ b/arch/arm/plat-orion/addr-map.c
-@@ -95,6 +95,19 @@ void __init orion_setup_cpu_win(const st
- 	}
- }
- 
-+static void __init orion_disable_cpu_win(const struct orion_addr_map_cfg *cfg,
-+					 const int win)
-+{
-+	void __iomem *addr = cfg->win_cfg_base(cfg, win);
-+
-+	writel(0, addr + WIN_BASE_OFF);
-+	writel(0, addr + WIN_CTRL_OFF);
-+	if (cfg->cpu_win_can_remap(cfg, win)) {
-+		writel(0, addr + WIN_REMAP_LO_OFF);
-+		writel(0, addr + WIN_REMAP_HI_OFF);
-+	}
-+}
-+
- /*
-  * Configure a number of windows.
-  */
-@@ -108,36 +121,22 @@ static void __init orion_setup_cpu_wins(
- 	}
- }
- 
--static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
--{
--	void __iomem *addr;
--	int i;
--
--	for (i = 0; i < cfg->num_wins; i++) {
--		addr = cfg->win_cfg_base(cfg, i);
--
--		writel(0, addr + WIN_BASE_OFF);
--		writel(0, addr + WIN_CTRL_OFF);
--		if (cfg->cpu_win_can_remap(cfg, i)) {
--			writel(0, addr + WIN_REMAP_LO_OFF);
--			writel(0, addr + WIN_REMAP_HI_OFF);
--		}
--	}
--}
--
- /*
-  * Disable, clear and configure windows.
-  */
- void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
- 			      const struct orion_addr_map_info *info)
- {
-+	int win;
-+
- 	if (!cfg->cpu_win_can_remap)
- 		cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
- 
- 	if (!cfg->win_cfg_base)
- 		cfg->win_cfg_base = orion_win_cfg_base;
- 
--	orion_disable_wins(cfg);
-+	for (win = 0; win < cfg->num_wins; win++)
-+		orion_disable_cpu_win(cfg, win);
- 
- 	if (info)
- 		orion_setup_cpu_wins(cfg, info);
diff --git a/target/linux/mvebu/patches-3.8/032-arm_plat_orion_introduce_orion_alloc_free_cpu_win.patch b/target/linux/mvebu/patches-3.8/032-arm_plat_orion_introduce_orion_alloc_free_cpu_win.patch
deleted file mode 100644
index 91ed678..0000000
--- a/target/linux/mvebu/patches-3.8/032-arm_plat_orion_introduce_orion_alloc_free_cpu_win.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-In the address decoding code, we implement two new functions:
-orion_alloc_cpu_win() and orion_free_cpu_win(). The first function
-finds an unused address decoding window, and configures it according
-to the given arguments (in terms of base address, size, target,
-attributes). The second function frees an address decoding window,
-given a physical base address.
-
-Those two new functions will be used by the PCIe code, which needs to
-dynamically register address decoding windows depending on the PCIe
-devices that are detected.
-
-The orion_free_cpu_win() function is only here to handle error cases
-in the PCIe devices initialization, in the normal case, address
-decoding windows are never freed.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/plat-orion/addr-map.c              |   50 +++++++++++++++++++++++++++
- arch/arm/plat-orion/include/plat/addr-map.h |    7 ++++
- 2 files changed, 57 insertions(+)
-
---- a/arch/arm/plat-orion/addr-map.c
-+++ b/arch/arm/plat-orion/addr-map.c
-@@ -109,6 +109,56 @@ static void __init orion_disable_cpu_win
- }
- 
- /*
-+ * Find an unused address decoding window, and enable it according to
-+ * the arguments passed (base, size, target, attributes, remap).
-+ */
-+int __init orion_alloc_cpu_win(const struct orion_addr_map_cfg *cfg,
-+			       const u32 base, const u32 size,
-+			       const u8 target, const u8 attr, const int remap)
-+{
-+	int win;
-+
-+	for (win = 0; win < cfg->num_wins; win++) {
-+		void __iomem *addr = cfg->win_cfg_base(cfg, win);
-+		u32 ctrl = readl(addr + WIN_CTRL_OFF);
-+		if (!(ctrl & WIN_CTRL_ENABLE))
-+			break;
-+	}
-+
-+	/* No more windows available */
-+	if (win == cfg->num_wins)
-+		return -ENOMEM;
-+
-+	orion_setup_cpu_win(cfg, win, base, size, target, attr, remap);
-+	return 0;
-+}
-+
-+/*
-+ * Free an address decoding window, given its base address.
-+ */
-+int __init orion_free_cpu_win(const struct orion_addr_map_cfg *cfg,
-+			      const u32 base)
-+{
-+	int win;
-+
-+	for (win = 0; win < cfg->num_wins; win++) {
-+		void __iomem *addr = cfg->win_cfg_base(cfg, win);
-+		u32 winbase = readl(addr + WIN_BASE_OFF);
-+		u32 ctrl = readl(addr + WIN_CTRL_OFF);
-+
-+		if (!(ctrl & WIN_CTRL_ENABLE))
-+			continue;
-+
-+		if (winbase == (base & 0xffff0000)) {
-+			orion_disable_cpu_win(cfg, win);
-+			return 0;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+/*
-  * Configure a number of windows.
-  */
- static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
---- a/arch/arm/plat-orion/include/plat/addr-map.h
-+++ b/arch/arm/plat-orion/include/plat/addr-map.h
-@@ -49,6 +49,13 @@ void __init orion_setup_cpu_win(const st
- 				const u32 size, const u8 target,
- 				const u8 attr, const int remap);
- 
-+int __init orion_alloc_cpu_win(const struct orion_addr_map_cfg *cfg,
-+			       const u32 base, const u32 size,
-+			       const u8 target, const u8 attr, const int remap);
-+
-+int __init orion_free_cpu_win(const struct orion_addr_map_cfg *cfg,
-+			      const u32 base);
-+
- void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- 					const void __iomem *ddr_window_cpu_base);
- #endif
diff --git a/target/linux/mvebu/patches-3.8/033-arm_mvebu_add_functions_to_alloc_free_pcie.patch b/target/linux/mvebu/patches-3.8/033-arm_mvebu_add_functions_to_alloc_free_pcie.patch
deleted file mode 100644
index fd3c1af..0000000
--- a/target/linux/mvebu/patches-3.8/033-arm_mvebu_add_functions_to_alloc_free_pcie.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-This commit adds two functions armada_370_xp_alloc_pcie_window() and
-armada_370_xp_free_pcie_window() that respectively allocate and free
-an address decoding window pointing to either a memory or I/O region
-of a PCIe device.
-
-Those functions will be used by the PCIe driver to create and remove
-those regions depending on the PCIe devices that are detected.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/mach-mvebu/addr-map.c |  156 ++++++++++++++++++++++++++++++++++++++--
- arch/arm/mach-mvebu/common.h   |    4 ++
- 2 files changed, 156 insertions(+), 4 deletions(-)
-
---- a/arch/arm/mach-mvebu/addr-map.c
-+++ b/arch/arm/mach-mvebu/addr-map.c
-@@ -24,14 +24,10 @@
- #define ARMADA_XP_TARGET_DEV_BUS	1
- #define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
- #define ARMADA_XP_TARGET_ETH1		3
--#define ARMADA_XP_TARGET_PCIE_0_2	4
- #define ARMADA_XP_TARGET_ETH0		7
--#define ARMADA_XP_TARGET_PCIE_1_3	8
- 
- #define ARMADA_370_TARGET_DEV_BUS       1
- #define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
--#define ARMADA_370_TARGET_PCIE_0        4
--#define ARMADA_370_TARGET_PCIE_1        8
- 
- #define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
- #define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
-@@ -89,6 +85,158 @@ static struct __initdata orion_addr_map_
- 	.win_cfg_base = armada_cfg_base,
- };
- 
-+#ifdef CONFIG_PCI
-+/*
-+ * PCIe windows allocation code.
-+ */
-+#define ARMADA_370_XP_PCIE_MEM_START 0xC0000000
-+#define ARMADA_370_XP_PCIE_MEM_END   (ARMADA_370_XP_PCIE_MEM_START + SZ_256M)
-+#define ARMADA_370_XP_PCIE_IO_START  0xF2000000
-+#define ARMADA_370_XP_PCIE_IO_END    (ARMADA_370_XP_PCIE_IO_START + SZ_1M)
-+
-+static unsigned long armada_370_xp_pcie_memaddr = ARMADA_370_XP_PCIE_MEM_START;
-+static unsigned long armada_370_xp_pcie_ioaddr = ARMADA_370_XP_PCIE_IO_START;
-+
-+/*
-+ * This structure and the following arrays allow to map a PCIe (port,
-+ * lane) tuple to the corresponding (target, attribute) tuple needed
-+ * to configure an address decoding window for the given PCIe (port,
-+ * lane).
-+ */
-+struct pcie_mapping {
-+	int port;
-+	int lane;
-+	u8  target;
-+	u8  attr;
-+};
-+
-+struct pcie_mapping armada_xp_pcie_mappings[] = {
-+	{ .port = 0, .lane = 0, .target = 4, .attr = 0xE0 },
-+	{ .port = 0, .lane = 1, .target = 4, .attr = 0xD0 },
-+	{ .port = 0, .lane = 2, .target = 4, .attr = 0xB0 },
-+	{ .port = 0, .lane = 3, .target = 4, .attr = 0x70 },
-+	{ .port = 1, .lane = 0, .target = 8, .attr = 0xE0 },
-+	{ .port = 1, .lane = 1, .target = 8, .attr = 0xD0 },
-+	{ .port = 1, .lane = 2, .target = 8, .attr = 0xB0 },
-+	{ .port = 1, .lane = 3, .target = 8, .attr = 0x70 },
-+	{ .port = 2, .lane = 0, .target = 4, .attr = 0xF0 },
-+	{ .port = 3, .lane = 0, .target = 8, .attr = 0xF0 },
-+	{ .port = -1 },
-+};
-+
-+struct pcie_mapping armada_370_pcie_mappings[] = {
-+	{ .port = 0, .lane = 0, .target = 4, .attr = 0xE0 },
-+	{ .port = 1, .lane = 0, .target = 8, .attr = 0xE0 },
-+	{ .port = -1 },
-+};
-+
-+/*
-+ * This function finds an available physical address range between
-+ * ARMADA_370_XP_PCIE_MEM_START and ARMADA_370_XP_PCIE_MEM_END (for
-+ * PCIe memory regions) or between ARMADA_370_XP_PCIE_IO_START and
-+ * ARMADA_370_XP_PCIE_IO_END (for PCIe I/O regions) and creates an
-+ * address decoding window from this allocated address pointing to the
-+ * right PCIe device.
-+ *
-+ * An error code is returned, the allocated base address is returned
-+ * through the 'outbase' argument.
-+ */
-+int __init armada_370_xp_alloc_pcie_window(int pcie_port, int pcie_lane,
-+					   int type, u32 size,
-+					   unsigned long *outbase)
-+{
-+	struct pcie_mapping *mapping, *mappings;
-+	u8 target, attr;
-+	u32 base;
-+	int ret;
-+
-+	if (of_machine_is_compatible("marvell,armadaxp"))
-+		mappings = armada_xp_pcie_mappings;
-+	else if (of_machine_is_compatible("marvell,armada370"))
-+		mappings = armada_370_pcie_mappings;
-+	else
-+		return -ENODEV;
-+
-+	for (mapping = mappings; mapping->port != -1; mapping++)
-+		if (mapping->port == pcie_port && mapping->lane == pcie_lane)
-+			break;
-+
-+	if (mapping->port == -1)
-+		return -ENODEV;
-+
-+	target = mapping->target;
-+	attr = mapping->attr;
-+
-+	if (type == IORESOURCE_MEM) {
-+		/*
-+		 * Bit 3 of the attributes indicates that it is a
-+		 * memory region, as opposed to an I/O region
-+		 */
-+		attr |= (1 << 3);
-+
-+		if (armada_370_xp_pcie_memaddr + size >
-+		    ARMADA_370_XP_PCIE_MEM_END)
-+			return -ENOMEM;
-+
-+		base = armada_370_xp_pcie_memaddr;
-+		armada_370_xp_pcie_memaddr += size;
-+
-+		ret = orion_alloc_cpu_win(&addr_map_cfg, base, size, target,
-+					  attr, -1);
-+		if (ret) {
-+			armada_370_xp_pcie_memaddr -= size;
-+			return ret;
-+		}
-+	} else if (type == IORESOURCE_IO) {
-+		if (armada_370_xp_pcie_ioaddr + size >
-+		    ARMADA_370_XP_PCIE_IO_END)
-+			return -ENOMEM;
-+
-+		base = armada_370_xp_pcie_ioaddr;
-+		armada_370_xp_pcie_ioaddr += size;
-+
-+		ret = orion_alloc_cpu_win(&addr_map_cfg, base, size, target,
-+					  attr, -1);
-+		if (ret) {
-+			armada_370_xp_pcie_ioaddr -= size;
-+			return ret;
-+		}
-+	} else
-+		return -ENODEV;
-+
-+	*outbase = base;
-+	return 0;
-+}
-+
-+/*
-+ * Frees an address decoding window previously allocated by
-+ * armada_370_xp_alloc_pcie_window(). Note that only the last window
-+ * allocated for a given type (MEM or IO) can be freed, due to the
-+ * simplicity of the allocator. This is however sufficient to handle
-+ * the error cases when initializing one PCIe device.
-+ */
-+int __init armada_370_xp_free_pcie_window(int type, unsigned long base,
-+					  u32 size)
-+{
-+	if (type == IORESOURCE_MEM) {
-+		/* We can only free the last allocated window */
-+		if (base + size != armada_370_xp_pcie_memaddr)
-+			return -EINVAL;
-+		orion_free_cpu_win(&addr_map_cfg, base);
-+		armada_370_xp_pcie_memaddr -= size;
-+	} else if (type == IORESOURCE_IO) {
-+		/* We can only free the last allocated window */
-+		if (base + size != armada_370_xp_pcie_ioaddr)
-+			return -EINVAL;
-+		orion_free_cpu_win(&addr_map_cfg, base);
-+		armada_370_xp_pcie_ioaddr -= size;
-+	} else
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+#endif
-+
- static int __init armada_setup_cpu_mbus(void)
- {
- 	struct device_node *np;
---- a/arch/arm/mach-mvebu/common.h
-+++ b/arch/arm/mach-mvebu/common.h
-@@ -25,4 +25,8 @@ int armada_370_xp_coherency_init(void);
- int armada_370_xp_pmsu_init(void);
- void armada_xp_secondary_startup(void);
- extern struct smp_operations armada_xp_smp_ops;
-+
-+int armada_370_xp_alloc_pcie_window(int pcie_port, int pcie_lane,
-+				    int type, u32 size, unsigned long *outbase);
-+int armada_370_xp_free_pcie_window(int type, unsigned long base, u32 size);
- #endif
diff --git a/target/linux/mvebu/patches-3.8/034-arm_plat_orion_make_common_pcie.patch b/target/linux/mvebu/patches-3.8/034-arm_plat_orion_make_common_pcie.patch
deleted file mode 100644
index 40ac714..0000000
--- a/target/linux/mvebu/patches-3.8/034-arm_plat_orion_make_common_pcie.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-mvebu is a new-style Orion platform, so it only selects PLAT_ORION,
-but not PLAT_ORION_LEGACY. It will however need the common PCIe code
-from plat-orion, so make this code available for PLAT_ORION platforms
-as a whole, and not only PLAT_ORION_LEGACY platforms.
-
-We also take this opportunity to build the PCIe code only when
-CONFIG_PCI is enabled.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/plat-orion/Makefile |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/plat-orion/Makefile
-+++ b/arch/arm/plat-orion/Makefile
-@@ -4,7 +4,8 @@
- ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
- 
- obj-y                             += addr-map.o
-+obj-$(CONFIG_PCI)                 += pcie.o
- 
- orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
--obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
-+obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o time.o common.o mpp.o
- obj-$(CONFIG_PLAT_ORION_LEGACY)   += $(orion-gpio-y)
diff --git a/target/linux/mvebu/patches-3.8/035-arm_mvebu_the_core_pcie_driver.patch b/target/linux/mvebu/patches-3.8/035-arm_mvebu_the_core_pcie_driver.patch
deleted file mode 100644
index aa4e1f4..0000000
--- a/target/linux/mvebu/patches-3.8/035-arm_mvebu_the_core_pcie_driver.patch
+++ /dev/null
@@ -1,474 +0,0 @@
-This driver implements the hw_pci operations needed by the core ARM
-PCI code to setup PCI devices and get their corresponding IRQs, and
-the pci_ops operations that are used by the PCI core to read/write the
-configuration space of PCI devices.
-
-In addition, this driver enumerates the different PCIe slots, and for
-those having a device plugged in, it allocates the necessary address
-decoding windows, using the new armada_370_xp_alloc_pcie_window()
-function from mach-mvebu/addr-map.c.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- .../devicetree/bindings/pci/armada-370-xp-pcie.txt |  136 +++++++++
- arch/arm/mach-mvebu/Makefile                       |    1 +
- arch/arm/mach-mvebu/pcie.c                         |  306 ++++++++++++++++++++
- 3 files changed, 443 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/armada-370-xp-pcie.txt
- create mode 100644 arch/arm/mach-mvebu/pcie.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/armada-370-xp-pcie.txt
-@@ -0,0 +1,136 @@
-+* Marvell Armada 370/XP PCIe interfaces
-+
-+Mandatory properties:
-+- compatible: must be "marvell,armada-370-xp-pcie"
-+- status: either "disabled" or "okay"
-+- #address-cells, set to <1>
-+- #size-cells, set to <1>
-+- ranges: describes the association between the physical addresses of
-+  the PCIe registers for each PCIe interface with "virtual" addresses
-+  as seen by the sub-nodes. One entry per PCIe interface. Each entry
-+  must have 3 values: the "virtual" address seen by the sub-nodes, the
-+  real physical address of the PCIe registers, and the size.
-+
-+In addition, the Device Tree node must have sub-nodes describing each
-+PCIe interface, having the following mandatory properties:
-+- reg: the address and size of the PCIe registers (translated
-+  addresses according to the ranges property of the parent)
-+- interrupts: the interrupt number of this PCIe interface
-+- clocks: the clock associated to this PCIe interface
-+- marvell,pcie-port: the physical PCIe port number
-+- status: either "disabled" or "okay"
-+
-+and the following optional properties:
-+- marvell,pcie-lane: the physical PCIe lane number, for ports having
-+  multiple lanes. If this property is not found, we assume that the
-+  value is 0.
-+
-+Example:
-+
-+pcie-controller {
-+	compatible = "marvell,armada-370-xp-pcie";
-+	status = "disabled";
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	ranges = <0       0xd0040000 0x2000 /* port0x1_port0 */
-+		  0x2000  0xd0042000 0x2000 /* port2x1_port0 */
-+		  0x4000  0xd0044000 0x2000 /* port0x1_port1 */
-+		  0x8000  0xd0048000 0x2000 /* port0x1_port2 */
-+		  0xC000  0xd004C000 0x2000 /* port0x1_port3 */
-+		  0x10000 0xd0080000 0x2000 /* port1x1_port0 */
-+		  0x12000 0xd0082000 0x2000 /* port3x1_port0 */
-+		  0x14000 0xd0084000 0x2000 /* port1x1_port1 */
-+		  0x18000 0xd0088000 0x2000 /* port1x1_port2 */
-+		  0x1C000 0xd008C000 0x2000 /* port1x1_port3 */>;
-+
-+	pcie0.0@0xd0040000 {
-+		reg = <0x0 0x2000>;
-+		interrupts = <58>;
-+		clocks = <&gateclk 5>;
-+		marvell,pcie-port = <0>;
-+		marvell,pcie-lane = <0>;
-+		status = "disabled";
-+	};
-+
-+	pcie0.1@0xd0044000 {
-+		reg = <0x4000 0x2000>;
-+		interrupts = <59>;
-+		clocks = <&gateclk 5>;
-+		marvell,pcie-port = <0>;
-+		marvell,pcie-lane = <1>;
-+		status = "disabled";
-+	};
-+
-+	pcie0.2@0xd0048000 {
-+		reg = <0x8000 0x2000>;
-+		interrupts = <60>;
-+		clocks = <&gateclk 5>;
-+		marvell,pcie-port = <0>;
-+		marvell,pcie-lane = <2>;
-+		status = "disabled";
-+	};
-+
-+	pcie0.3@0xd004C000 {
-+		reg = <0xC000 0x2000>;
-+		interrupts = <61>;
-+		clocks = <&gateclk 5>;
-+		marvell,pcie-port = <0>;
-+		marvell,pcie-lane = <3>;
-+		status = "disabled";
-+	};
-+
-+	pcie1.0@0xd0040000 {
-+		reg = <0x10000 0x2000>;
-+		interrupts = <62>;
-+		clocks = <&gateclk 6>;
-+		marvell,pcie-port = <1>;
-+		marvell,pcie-lane = <0>;
-+		status = "disabled";
-+	};
-+
-+	pcie1.1@0xd0044000 {
-+		reg = <0x14000 0x2000>;
-+		interrupts = <63>;
-+		clocks = <&gateclk 6>;
-+		marvell,pcie-port = <1>;
-+		marvell,pcie-lane = <1>;
-+		status = "disabled";
-+	};
-+
-+	pcie1.2@0xd0048000 {
-+		reg = <0x18000 0x2000>;
-+		interrupts = <64>;
-+		clocks = <&gateclk 6>;
-+		marvell,pcie-port = <1>;
-+		marvell,pcie-lane = <2>;
-+		status = "disabled";
-+	};
-+
-+	pcie1.3@0xd004C000 {
-+		reg = <0x1C000 0x2000>;
-+		interrupts = <65>;
-+		clocks = <&gateclk 6>;
-+		marvell,pcie-port = <1>;
-+		marvell,pcie-lane = <3>;
-+		status = "disabled";
-+	};
-+
-+	pcie2@0xd0042000 {
-+		reg = <0x2000 0x2000>;
-+		interrupts = <99>;
-+		clocks = <&gateclk 7>;
-+		marvell,pcie-port = <2>;
-+		marvell,pcie-lane = <0>;
-+		status = "disabled";
-+	};
-+
-+	pcie3@0xd0082000 {
-+		reg = <0x12000 0x2000>;
-+		interrupts = <103>;
-+		clocks = <&gateclk 8>;
-+		marvell,pcie-port = <3>;
-+		marvell,pcie-lane = <0>;
-+		status = "disabled";
-+	};
-+};
-+
---- a/arch/arm/mach-mvebu/Makefile
-+++ b/arch/arm/mach-mvebu/Makefile
-@@ -7,3 +7,4 @@ obj-y += system-controller.o
- obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
- obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
- obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
-+obj-$(CONFIG_PCI)		 += pcie.o
---- /dev/null
-+++ b/arch/arm/mach-mvebu/pcie.c
-@@ -0,0 +1,306 @@
-+/*
-+ * PCIe driver for Marvell Armada 370 and Armada XP SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_address.h>
-+#include <linux/of_pci.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
-+#include <plat/pcie.h>
-+#include "common.h"
-+
-+struct pcie_port {
-+	u8		  root_bus_nr;
-+	void __iomem	 *base;
-+	spinlock_t	  conf_lock;
-+	int		  irq;
-+	struct resource	  res;
-+	int               haslink;
-+	u32               port;
-+	u32               lane;
-+	struct clk       *clk;
-+};
-+
-+static struct pcie_port *pcie_ports;
-+
-+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-+{
-+	/*
-+	 * Don't go out when trying to access --
-+	 * 1. nonexisting device on local bus
-+	 * 2. where there's no device connected (no link)
-+	 */
-+	if (bus == pp->root_bus_nr && dev == 0)
-+		return 1;
-+
-+	if (!orion_pcie_link_up(pp->base))
-+		return 0;
-+
-+	if (bus == pp->root_bus_nr && dev != 1)
-+		return 0;
-+
-+	return 1;
-+}
-+
-+/*
-+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
-+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
-+ * transactions are atomic.
-+ */
-+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-+			int size, u32 *val)
-+{
-+	struct pci_sys_data *sys = bus->sysdata;
-+	struct pcie_port *pp = sys->private_data;
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
-+		*val = 0xffffffff;
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+	}
-+
-+	spin_lock_irqsave(&pp->conf_lock, flags);
-+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&pp->conf_lock, flags);
-+
-+	return ret;
-+}
-+
-+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-+			int where, int size, u32 val)
-+{
-+	struct pci_sys_data *sys = bus->sysdata;
-+	struct pcie_port *pp = sys->private_data;
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+	spin_lock_irqsave(&pp->conf_lock, flags);
-+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&pp->conf_lock, flags);
-+
-+	return ret;
-+}
-+
-+static struct pci_ops pcie_ops = {
-+	.read = pcie_rd_conf,
-+	.write = pcie_wr_conf,
-+};
-+
-+/*
-+ * Returns 0 when the device could not be initialized, 1 when
-+ * initialization is successful
-+ */
-+static int __init armada_370_xp_pcie_setup(int nr, struct pci_sys_data *sys)
-+{
-+	struct pcie_port *port = &pcie_ports[nr];
-+	unsigned long membase, iobase;
-+	int ret;
-+
-+	if (!port->haslink)
-+		return 0;
-+
-+	sys->private_data = port;
-+	port->root_bus_nr = sys->busnr;
-+	spin_lock_init(&port->conf_lock);
-+
-+	ret = armada_370_xp_alloc_pcie_window(port->port, port->lane,
-+					      IORESOURCE_MEM, SZ_64M, &membase);
-+	if (ret) {
-+		pr_err("PCIe%d.%d: Cannot get memory window, device disabled\n",
-+		       port->port, port->lane);
-+		return 0;
-+	}
-+
-+	ret = armada_370_xp_alloc_pcie_window(port->port, port->lane,
-+					      IORESOURCE_IO, SZ_64K, &iobase);
-+	if (ret) {
-+		pr_err("PCIe%d.%d: Cannot get I/O window, device disabled\n",
-+		       port->port, port->lane);
-+		armada_370_xp_free_pcie_window(IORESOURCE_MEM, membase, SZ_64M);
-+		return 0;
-+	}
-+
-+	port->res.name = kasprintf(GFP_KERNEL, "PCIe %d.%d MEM",
-+				   port->port, port->lane);
-+	if (!port->res.name) {
-+		armada_370_xp_free_pcie_window(IORESOURCE_IO, iobase, SZ_64K);
-+		armada_370_xp_free_pcie_window(IORESOURCE_MEM, membase, SZ_64M);
-+		return 0;
-+	}
-+
-+	port->res.start = membase;
-+	port->res.end = membase + SZ_32M - 1;
-+	port->res.flags = IORESOURCE_MEM;
-+
-+	pci_ioremap_io(SZ_64K * sys->busnr, iobase);
-+
-+	if (request_resource(&iomem_resource, &port->res)) {
-+		pr_err("PCIe%d.%d: Cannot request memory resource\n",
-+		       port->port, port->lane);
-+		kfree(port->res.name);
-+		armada_370_xp_free_pcie_window(IORESOURCE_IO, iobase, SZ_64K);
-+		armada_370_xp_free_pcie_window(IORESOURCE_MEM, membase, SZ_64M);
-+		return 0;
-+	}
-+
-+	pci_add_resource_offset(&sys->resources, &port->res, sys->mem_offset);
-+
-+	orion_pcie_set_local_bus_nr(port->base, sys->busnr);
-+	orion_pcie_setup(port->base);
-+
-+	return 1;
-+}
-+
-+static void rc_pci_fixup(struct pci_dev *dev)
-+{
-+	/*
-+	 * Prevent enumeration of root complex.
-+	 */
-+	if (dev->bus->parent == NULL && dev->devfn == 0) {
-+		int i;
-+
-+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-+			dev->resource[i].start = 0;
-+			dev->resource[i].end   = 0;
-+			dev->resource[i].flags = 0;
-+		}
-+	}
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-+
-+static int __init armada_370_xp_pcie_map_irq(const struct pci_dev *dev, u8 slot,
-+					     u8 pin)
-+{
-+	struct pci_sys_data *sys = dev->sysdata;
-+	struct pcie_port *port = sys->private_data;
-+
-+	return port->irq;
-+}
-+
-+static struct hw_pci armada_370_xp_pci __initdata = {
-+	.setup		= armada_370_xp_pcie_setup,
-+	.map_irq	= armada_370_xp_pcie_map_irq,
-+	.ops            = &pcie_ops,
-+};
-+
-+static int __init armada_370_xp_pcie_probe(struct platform_device *pdev)
-+{
-+	struct device_node *child;
-+	int nports, i;
-+
-+	nports = 0;
-+	for_each_child_of_node(pdev->dev.of_node, child) {
-+		if (!of_device_is_available(child))
-+			continue;
-+		nports++;
-+	}
-+
-+	pcie_ports = devm_kzalloc(&pdev->dev, nports * sizeof(*pcie_ports),
-+				  GFP_KERNEL);
-+	if (!pcie_ports)
-+		return -ENOMEM;
-+
-+	i = 0;
-+	for_each_child_of_node(pdev->dev.of_node, child) {
-+		struct pcie_port *port = &pcie_ports[i];
-+
-+		if (!of_device_is_available(child))
-+			continue;
-+
-+		if (of_property_read_u32(child, "marvell,pcie-port",
-+					 &port->port))
-+			continue;
-+
-+		if (of_property_read_u32(child, "marvell,pcie-lane",
-+					 &port->lane))
-+			port->lane = 0;
-+
-+		port->base = of_iomap(child, 0);
-+		if (!port->base) {
-+			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
-+				port->port, port->lane);
-+			continue;
-+		}
-+
-+		if (orion_pcie_link_up(port->base)) {
-+			port->haslink = 1;
-+			dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
-+				 port->port, port->lane);
-+		} else {
-+			port->haslink = 0;
-+			dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
-+				 port->port, port->lane);
-+			iounmap(port->base);
-+			continue;
-+		}
-+
-+		port->irq = irq_of_parse_and_map(child, 0);
-+		if (port->irq == 0) {
-+			dev_err(&pdev->dev, "PCIe%d.%d: cannot parse and map IRQ\n",
-+				port->port, port->lane);
-+			iounmap(port->base);
-+			port->haslink = 0;
-+			continue;
-+		}
-+
-+		port->clk = of_clk_get_by_name(child, NULL);
-+		if (!port->clk) {
-+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
-+			       port->port, port->lane);
-+			irq_dispose_mapping(port->irq);
-+			iounmap(port->base);
-+			port->haslink = 0;
-+			continue;
-+		}
-+
-+		clk_prepare_enable(port->clk);
-+
-+		i++;
-+	}
-+
-+	armada_370_xp_pci.nr_controllers = nports;
-+	pci_common_init(&armada_370_xp_pci);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id armada_370_xp_pcie_of_match_table[] = {
-+	{ .compatible = "marvell,armada-370-xp-pcie", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, armada_370_xp_pcie_of_match_table);
-+
-+static struct platform_driver armada_370_xp_pcie_driver = {
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = "armada-370-xp-pcie",
-+		.of_match_table =
-+		   of_match_ptr(armada_370_xp_pcie_of_match_table),
-+	},
-+};
-+
-+static int armada_370_xp_pcie_init(void)
-+{
-+	return platform_driver_probe(&armada_370_xp_pcie_driver,
-+				     armada_370_xp_pcie_probe);
-+}
-+
-+subsys_initcall(armada_370_xp_pcie_init);
-+
-+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
-+MODULE_DESCRIPTION("Marvell Armada 370/XP PCIe driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/mvebu/patches-3.8/036-arm_mvebu_pcie_support_is_now_available.patch b/target/linux/mvebu/patches-3.8/036-arm_mvebu_pcie_support_is_now_available.patch
deleted file mode 100644
index b3c9a63..0000000
--- a/target/linux/mvebu/patches-3.8/036-arm_mvebu_pcie_support_is_now_available.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Now that the PCIe driver for mvebu has been integrated and all its
-relevant dependencies, we can mark the ARCH_MVEBU platform has
-MIGHT_HAVE_PCI, which allows to select the PCI bus support if needed.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/mach-mvebu/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -13,6 +13,8 @@ config ARCH_MVEBU
- 	select MVEBU_CLK_CORE
- 	select MVEBU_CLK_CPU
- 	select MVEBU_CLK_GATING
-+	select MIGHT_HAVE_PCI
-+	select PCI_QUIRKS if PCI
- 
- if ARCH_MVEBU
- 
diff --git a/target/linux/mvebu/patches-3.8/037-arm_mvebu_add_pcie_dt_a370.patch b/target/linux/mvebu/patches-3.8/037-arm_mvebu_add_pcie_dt_a370.patch
deleted file mode 100644
index 2cb8a17..0000000
--- a/target/linux/mvebu/patches-3.8/037-arm_mvebu_add_pcie_dt_a370.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-The Armada 370 SoC has two 1x PCIe 2.0 interfaces, so we add the
-necessary Device Tree informations to make these interfaces availabel.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370.dtsi |   25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -153,5 +153,29 @@
- 			clocks = <&coreclk 0>;
- 		};
- 
-+		pcie-controller {
-+			compatible = "marvell,armada-370-xp-pcie";
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0      0xd0040000 0x2000
-+			          0x2000 0xd0080000 0x2000>;
-+
-+			pcie0@0xd0040000 {
-+				reg = <0x0 0x2000>;
-+				interrupts = <58>;
-+				clocks = <&gateclk 5>;
-+				status = "disabled";
-+				marvell,pcie-port = <0>;
-+			};
-+
-+			pcie1@0xd0080000 {
-+				reg = <0x2000 0x2000>;
-+				interrupts = <62>;
-+				clocks = <&gateclk 9>;
-+				status = "disabled";
-+				marvell,pcie-port = <1>;
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/038-arm_mvebu_add_pcie_dt_axp.patch b/target/linux/mvebu/patches-3.8/038-arm_mvebu_add_pcie_dt_axp.patch
deleted file mode 100644
index 647f1da..0000000
--- a/target/linux/mvebu/patches-3.8/038-arm_mvebu_add_pcie_dt_axp.patch
+++ /dev/null
@@ -1,284 +0,0 @@
-The Armada XP SoCs have multiple PCIe interfaces. The MV78230 has 2
-PCIe units (one 4x or quad 1x, the other 1x only), the MV78260 has 3
-PCIe units (two 4x or quad 1x and one 4x/1x), the MV78460 has 4 PCIe
-units (two 4x or quad 1x and two 4x/1x). We therefore add the
-necessary Device Tree informations to make those PCIe interfaces
-usable.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-mv78230.dtsi |   62 +++++++++++++++++
- arch/arm/boot/dts/armada-xp-mv78260.dtsi |   72 +++++++++++++++++++
- arch/arm/boot/dts/armada-xp-mv78460.dtsi |  112 ++++++++++++++++++++++++++++++
- 3 files changed, 246 insertions(+)
-
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -76,5 +76,67 @@
- 			#interrupts-cells = <2>;
- 			interrupts = <87>, <88>, <89>;
- 		};
-+
-+		/*
-+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-+		 * configured as x4 or quad x1 lanes. One unit is
-+		 * x4/x1.
-+		 */
-+		pcie-controller {
-+			compatible = "marvell,armada-370-xp-pcie";
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0       0xd0040000 0x2000 /* port0x1_port0 */
-+				  0x2000  0xd0042000 0x2000 /* port2x1_port0 */
-+				  0x4000  0xd0044000 0x2000 /* port0x1_port1 */
-+				  0x8000  0xd0048000 0x2000 /* port0x1_port2 */
-+				  0xC000  0xd004C000 0x2000 /* port0x1_port3 */>;
-+
-+			pcie0.0@0xd0040000 {
-+				reg = <0x0 0x2000>;
-+				interrupts = <58>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.1@0xd0044000 {
-+				reg = <0x4000 0x2000>;
-+				interrupts = <59>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <1>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.2@0xd0048000 {
-+				reg = <0x8000 0x2000>;
-+				interrupts = <60>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <2>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.3@0xd004C000 {
-+				reg = <0xC000 0x2000>;
-+				interrupts = <61>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <3>;
-+				status = "disabled";
-+			};
-+
-+			pcie2@0xd0042000 {
-+				reg = <0x2000 0x2000>;
-+				interrupts = <99>;
-+				clocks = <&gateclk 7>;
-+				marvell,pcie-port = <2>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -96,5 +96,77 @@
- 				clocks = <&gateclk 1>;
- 				status = "disabled";
- 		};
-+
-+		/*
-+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-+		 * configured as x4 or quad x1 lanes. One unit is
-+		 * x4/x1.
-+		 */
-+		pcie-controller {
-+			compatible = "marvell,armada-370-xp-pcie";
-+			status = "okay";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0       0xd0040000 0x2000 /* port0x1_port0 */
-+				  0x2000  0xd0042000 0x2000 /* port2x1_port0 */
-+				  0x4000  0xd0044000 0x2000 /* port0x1_port1 */
-+				  0x8000  0xd0048000 0x2000 /* port0x1_port2 */
-+				  0xC000  0xd004C000 0x2000 /* port0x1_port3 */
-+				  0x12000 0xd0082000 0x2000 /* port3x1_port0 */>;
-+
-+			pcie0.0@0xd0040000 {
-+				reg = <0x0 0x2000>;
-+				interrupts = <58>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.1@0xd0044000 {
-+				reg = <0x4000 0x2000>;
-+				interrupts = <59>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <1>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.2@0xd0048000 {
-+				reg = <0x8000 0x2000>;
-+				interrupts = <60>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <2>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.3@0xd004C000 {
-+				reg = <0xC000 0x2000>;
-+				interrupts = <61>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <3>;
-+				status = "disabled";
-+			};
-+
-+			pcie2@0xd0042000 {
-+				reg = <0x2000 0x2000>;
-+				interrupts = <99>;
-+				clocks = <&gateclk 7>;
-+				marvell,pcie-port = <2>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie3@0xd0082000 {
-+				reg = <0x12000 0x2000>;
-+				interrupts = <103>;
-+				clocks = <&gateclk 8>;
-+				marvell,pcie-port = <3>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -111,5 +111,117 @@
- 				clocks = <&gateclk 1>;
- 				status = "disabled";
- 		};
-+
-+		/*
-+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-+		 * configured as x4 or quad x1 lanes. Two units are
-+		 * x4/x1.
-+		 */
-+		pcie-controller {
-+			compatible = "marvell,armada-370-xp-pcie";
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0       0xd0040000 0x2000 /* port0x1_port0 */
-+				  0x2000  0xd0042000 0x2000 /* port2x1_port0 */
-+				  0x4000  0xd0044000 0x2000 /* port0x1_port1 */
-+				  0x8000  0xd0048000 0x2000 /* port0x1_port2 */
-+				  0xC000  0xd004C000 0x2000 /* port0x1_port3 */
-+				  0x10000 0xd0080000 0x2000 /* port1x1_port0 */
-+				  0x12000 0xd0082000 0x2000 /* port3x1_port0 */
-+				  0x14000 0xd0084000 0x2000 /* port1x1_port1 */
-+				  0x18000 0xd0088000 0x2000 /* port1x1_port2 */
-+				  0x1C000 0xd008C000 0x2000 /* port1x1_port3 */>;
-+
-+			pcie0.0@0xd0040000 {
-+				reg = <0x0 0x2000>;
-+				interrupts = <58>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.1@0xd0044000 {
-+				reg = <0x4000 0x2000>;
-+				interrupts = <59>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <1>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.2@0xd0048000 {
-+				reg = <0x8000 0x2000>;
-+				interrupts = <60>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <2>;
-+				status = "disabled";
-+			};
-+
-+			pcie0.3@0xd004C000 {
-+				reg = <0xC000 0x2000>;
-+				interrupts = <61>;
-+				clocks = <&gateclk 5>;
-+				marvell,pcie-port = <0>;
-+				marvell,pcie-lane = <3>;
-+				status = "disabled";
-+			};
-+
-+			pcie1.0@0xd0040000 {
-+				reg = <0x10000 0x2000>;
-+				interrupts = <62>;
-+				clocks = <&gateclk 6>;
-+				marvell,pcie-port = <1>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie1.1@0xd0044000 {
-+				reg = <0x14000 0x2000>;
-+				interrupts = <63>;
-+				clocks = <&gateclk 6>;
-+				marvell,pcie-port = <1>;
-+				marvell,pcie-lane = <1>;
-+				status = "disabled";
-+			};
-+
-+			pcie1.2@0xd0048000 {
-+				reg = <0x18000 0x2000>;
-+				interrupts = <64>;
-+				clocks = <&gateclk 6>;
-+				marvell,pcie-port = <1>;
-+				marvell,pcie-lane = <2>;
-+				status = "disabled";
-+			};
-+
-+			pcie1.3@0xd004C000 {
-+				reg = <0x1C000 0x2000>;
-+				interrupts = <65>;
-+				clocks = <&gateclk 6>;
-+				marvell,pcie-port = <1>;
-+				marvell,pcie-lane = <3>;
-+				status = "disabled";
-+			};
-+
-+			pcie2@0xd0042000 {
-+				reg = <0x2000 0x2000>;
-+				interrupts = <99>;
-+				clocks = <&gateclk 7>;
-+				marvell,pcie-port = <2>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+
-+			pcie3@0xd0082000 {
-+				reg = <0x12000 0x2000>;
-+				interrupts = <103>;
-+				clocks = <&gateclk 8>;
-+				marvell,pcie-port = <3>;
-+				marvell,pcie-lane = <0>;
-+				status = "disabled";
-+			};
-+		};
- 	};
-  };
diff --git a/target/linux/mvebu/patches-3.8/039-arm_mvebu_add_pcie_dt_ax34.patch b/target/linux/mvebu/patches-3.8/039-arm_mvebu_add_pcie_dt_ax34.patch
deleted file mode 100644
index 893c073..0000000
--- a/target/linux/mvebu/patches-3.8/039-arm_mvebu_add_pcie_dt_ax34.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-The PlatHome OpenBlocks AX3-4 has an internal mini-PCIe slot that can
-be used to plug mini-PCIe devices. We therefore enable the PCIe
-interface that corresponds to this slot.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts |    7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-@@ -130,5 +130,12 @@
- 		usb@d0052000 {
- 			status = "okay";
- 		};
-+		pcie-controller {
-+			status = "okay";
-+			/* Internal mini-PCIe connector */
-+			pcie0.0@0xd0040000 {
-+				status = "okay";
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/040-arm_mvebu_add_pcie_axp_db.patch b/target/linux/mvebu/patches-3.8/040-arm_mvebu_add_pcie_axp_db.patch
deleted file mode 100644
index af15d4b..0000000
--- a/target/linux/mvebu/patches-3.8/040-arm_mvebu_add_pcie_axp_db.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-The Marvell evaluation board (DB) for the Armada XP SoC has 6
-physicals full-size PCIe slots, so we enable the corresponding PCIe
-interfaces in the Device Tree.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-xp-db.dts |   27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm/boot/dts/armada-xp-db.dts
-+++ b/arch/arm/boot/dts/armada-xp-db.dts
-@@ -109,5 +109,32 @@
- 		usb@d0052000 {
- 			status = "okay";
- 		};
-+
-+		pcie-controller {
-+			status = "okay";
-+
-+			/*
-+			 * All 6 slots are physically present as
-+			 * standard PCIe slots on the board.
-+			 */
-+			pcie0.0@0xd0040000 {
-+				status = "okay";
-+			};
-+			pcie0.1@0xd0044000 {
-+				status = "okay";
-+			};
-+			pcie0.2@0xd0048000 {
-+				status = "okay";
-+			};
-+			pcie0.3@0xd004C000 {
-+				status = "okay";
-+			};
-+			pcie2@0xd0042000 {
-+				status = "okay";
-+			};
-+			pcie3@0xd0082000 {
-+				status = "okay";
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/041-arm_mvebu_add_pcie_dt_mirabox.patch b/target/linux/mvebu/patches-3.8/041-arm_mvebu_add_pcie_dt_mirabox.patch
deleted file mode 100644
index 1b6089e..0000000
--- a/target/linux/mvebu/patches-3.8/041-arm_mvebu_add_pcie_dt_mirabox.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-The Globalscale Mirabox platform uses one PCIe interface for an
-available mini-PCIe slot, and the other PCIe interface for an internal
-USB 3.0 controller. We add the necessary Device Tree informations to
-enable those two interfaces.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-mirabox.dts |   14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-mirabox.dts
-+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
-@@ -70,5 +70,19 @@
- 		usb@d0051000 {
- 			status = "okay";
- 		};
-+
-+		pcie-controller {
-+			status = "okay";
-+
-+			/* Internal mini-PCIe connector */
-+			pcie0@0xd0040000 {
-+				status = "okay";
-+			};
-+
-+			/* Connected on the PCB to a USB 3.0 XHCI controller */
-+			pcie1@0xd0080000 {
-+				status = "okay";
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/042-arm_mvebu_add_pcie_dt_a370_db.patch b/target/linux/mvebu/patches-3.8/042-arm_mvebu_add_pcie_dt_a370_db.patch
deleted file mode 100644
index 1a853f3..0000000
--- a/target/linux/mvebu/patches-3.8/042-arm_mvebu_add_pcie_dt_a370_db.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-The Marvell evaluation board (DB) for the Armada 370 SoC has 2
-physical full-size PCIe slots, so we enable the corresponding PCIe
-interfaces in the Device Tree.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- arch/arm/boot/dts/armada-370-db.dts |   15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-370-db.dts
-+++ b/arch/arm/boot/dts/armada-370-db.dts
-@@ -82,5 +82,20 @@
- 		usb@d0051000 {
- 			status = "okay";
- 		};
-+
-+		pcie-controller {
-+			status = "okay";
-+			/*
-+			 * The two PCIe units are accessible through
-+			 * both standard PCIe slots and mini-PCIe
-+			 * slots on the board.
-+			 */
-+			pcie0@0xd0040000 {
-+				status = "okay";
-+			};
-+			pcie1@0xd0080000 {
-+				status = "okay";
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/043-arm_mvebu_enable_usb_a370_rd.patch b/target/linux/mvebu/patches-3.8/043-arm_mvebu_enable_usb_a370_rd.patch
deleted file mode 100644
index 5bc0482..0000000
--- a/target/linux/mvebu/patches-3.8/043-arm_mvebu_enable_usb_a370_rd.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/arch/arm/boot/dts/armada-370-rd.dts
-+++ b/arch/arm/boot/dts/armada-370-rd.dts
-@@ -63,5 +63,13 @@
- 			pinctrl-names = "default";
- 			status = "okay";
- 		};
-+
-+		usb@d0050000 {
-+			status = "okay";
-+		};
-+
-+		usb@d0051000 {
-+			status = "okay";
-+		};
- 	};
- };
diff --git a/target/linux/mvebu/patches-3.8/044-arm_mvebu_add_pcie_dt_a370_rd.patch b/target/linux/mvebu/patches-3.8/044-arm_mvebu_add_pcie_dt_a370_rd.patch
deleted file mode 100644
index f3a02d7..0000000
--- a/target/linux/mvebu/patches-3.8/044-arm_mvebu_add_pcie_dt_a370_rd.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/boot/dts/armada-370-rd.dts
-+++ b/arch/arm/boot/dts/armada-370-rd.dts
-@@ -71,5 +71,20 @@
- 		usb@d0051000 {
- 			status = "okay";
- 		};
-+
-+		pcie-controller {
-+			status = "okay";
-+			/*
-+			 * The two PCIe units are accessible through
-+			 * both standard PCIe slots and mini-PCIe
-+			 * slots on the board.
-+			 */
-+			pcie0@0xd0040000 {
-+				status = "okay";
-+			};
-+			pcie1@0xd0080000 {
-+				status = "okay";
-+			};
-+		};
- 	};
- };