ipq806x: remove accidentially comitted file

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 464 deletions

diff --git a/target/linux/ipq806x/a b/target/linux/ipq806x/a
deleted file mode 100644
index eddecef..0000000
--- a/target/linux/ipq806x/a
+++ /dev/null
@@ -1,464 +0,0 @@
-commit be3de98aef65403129a4b714ddce8ab71f563209
-Author: Ash Benz <ash.benz@bk.ru>
-Date:   Fri May 27 22:26:45 2016 +0800
-
-    ipq806x/dts: Add Archer C2600 DTS
-    
-    Signed-off-by: Ash Benz <ash.benz@bk.ru>
-
-diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
-index 52cc1fa..77391d0 100644
---- a/target/linux/ipq806x/image/Makefile
-+++ b/target/linux/ipq806x/image/Makefile
-@@ -36,11 +36,6 @@ define Build/append-dtb
- 	cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@
- endef
- 
--define Build/append-new-dtb
--       $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
--       cat $@.dtb >> $@
--endef
--
- define Build/append-file
- 	cat $(1) >> $@
- endef
-@@ -95,7 +90,7 @@ define Device/TpSafeImage
- 	PROFILES += $$(DEVICE_NAME)
- 	FILESYSTEMS := squashfs
- 	KERNEL_SUFFIX := -uImage
--	KERNEL = kernel-bin | append-new-dtb | uImage none
-+	KERNEL = kernel-bin | append-dtb | uImage none
- 	KERNEL_NAME := zImage
- 	TPLINK_BOARD_NAME :=
- 	IMAGES := factory.bin sysupgrade.bin
-diff --git a/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch
-new file mode 100644
-index 0000000..8952f33
---- /dev/null
-+++ b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch
-@@ -0,0 +1,425 @@
-+--- a/arch/arm/boot/dts/Makefile
-++++ b/arch/arm/boot/dts/Makefile
-+@@ -506,6 +506,7 @@
-+ 	qcom-apq8084-ifc6540.dtb \
-+ 	qcom-apq8084-mtp.dtb \
-+ 	qcom-ipq8064-ap148.dtb \
-++	qcom-ipq8064-c2600.dtb \
-+ 	qcom-ipq8064-db149.dtb \
-+ 	qcom-ipq8064-r7500.dtb \
-+ 	qcom-ipq8064-d7800.dtb \
-+--- /dev/null
-++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
-+@@ -0,0 +1,412 @@
-++#include "qcom-ipq8064-v1.0.dtsi"
-++#include <dt-bindings/input/input.h>
-++
-++/ {
-++	model = "TP-Link Archer C2600";
-++	compatible = "tplink,c2600", "qcom,ipq8064";
-++
-++	memory@0 {
-++		reg = <0x42000000 0x1e000000>;
-++		device_type = "memory";
-++	};
-++
-++	reserved-memory {
-++		#address-cells = <1>;
-++		#size-cells = <1>;
-++		ranges;
-++		rsvd@41200000 {
-++			reg = <0x41200000 0x300000>;
-++			no-map;
-++		};
-++	};
-++
-++	aliases {
-++		serial0 = &uart4;
-++		mdio-gpio0 = &mdio0;
-++	};
-++
-++	chosen {
-++		linux,stdout-path = "serial0:115200n8";
-++	};
-++
-++	soc {
-++		pinmux@800000 {
-++			i2c4_pins: i2c4_pinmux {
-++				pins = "gpio12", "gpio13";
-++				function = "gsbi4";
-++				bias-disable;
-++			};
-++
-++			spi_pins: spi_pins {
-++				mux {
-++					pins = "gpio18", "gpio19", "gpio21";
-++					function = "gsbi5";
-++					drive-strength = <10>;
-++					bias-none;
-++				};
-++			};
-++
-++			nand_pins: nand_pins {
-++				mux {
-++					pins = "gpio34", "gpio35", "gpio36",
-++					       "gpio37", "gpio38", "gpio39",
-++					       "gpio40", "gpio41", "gpio42",
-++					       "gpio43", "gpio44", "gpio45",
-++					       "gpio46", "gpio47";
-++					function = "nand";
-++					drive-strength = <10>;
-++					bias-disable;
-++				};
-++
-++				pullups {
-++					pins = "gpio39";
-++					bias-pull-up;
-++				};
-++
-++				hold {
-++					pins = "gpio40", "gpio41", "gpio42",
-++					       "gpio43", "gpio44", "gpio45",
-++					       "gpio46", "gpio47";
-++					bias-bus-hold;
-++				};
-++			};
-++
-++			mdio0_pins: mdio0_pins {
-++				mux {
-++					pins = "gpio0", "gpio1";
-++					function = "gpio";
-++					drive-strength = <8>;
-++					bias-disable;
-++				};
-++			};
-++
-++			rgmii2_pins: rgmii2_pins {
-++				mux {
-++					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-++					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-++					function = "rgmii2";
-++					drive-strength = <8>;
-++					bias-disable;
-++				};
-++			};
-++		};
-++
-++		gsbi@16300000 {
-++			qcom,mode = <GSBI_PROT_I2C_UART>;
-++			status = "ok";
-++			serial@16340000 {
-++				status = "ok";
-++			};
-++			/*
-++			 * The i2c device on gsbi4 should not be enabled.
-++			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-++			 * RPM usage. Turning this on in kernel manifests as
-++			 * i2c failure for the RPM.
-++			 */
-++		};
-++
-++		gsbi5: gsbi@1a200000 {
-++			qcom,mode = <GSBI_PROT_SPI>;
-++			status = "ok";
-++
-++			spi4: spi@1a280000 {
-++				status = "ok";
-++				spi-max-frequency = <50000000>;
-++
-++				pinctrl-0 = <&spi_pins>;
-++				pinctrl-names = "default";
-++
-++				cs-gpios = <&qcom_pinmux 20 0>;
-++
-++				flash: m25p80@0 {
-++					compatible = "s25fl256s1";
-++					#address-cells = <1>;
-++					#size-cells = <1>;
-++					spi-max-frequency = <50000000>;
-++					reg = <0>;
-++
-++					SBL1@0 {
-++						label = "SBL1";
-++						reg = <0x0 0x20000>;
-++						read-only;
-++					};
-++					MIBIB@20000 {
-++						label = "MIBIB";
-++						reg = <0x20000 0x20000>;
-++						read-only;
-++					};
-++					SBL2@40000 {
-++						label = "SBL2";
-++						reg = <0x40000 0x20000>;
-++						read-only;
-++					};
-++					SBL3@60000 {
-++						label = "SBL3";
-++						reg = <0x60000 0x30000>;
-++						read-only;
-++					};
-++					DDRCONFIG@90000 {
-++						label = "DDRCONFIG";
-++						reg = <0x90000 0x10000>;
-++						read-only;
-++					};
-++					SSD@a0000 {
-++						label = "SSD";
-++						reg = <0xa0000 0x10000>;
-++						read-only;
-++					};
-++					TZ@b0000 {
-++						label = "TZ";
-++						reg = <0xb0000 0x30000>;
-++						read-only;
-++					};
-++					RPM@e0000 {
-++						label = "RPM";
-++						reg = <0xe0000 0x20000>;
-++						read-only;
-++					};
-++					fs-uboot@100000 {
-++						label = "fs-uboot";
-++						reg = <0x100000 0x70000>;
-++						read-only;
-++					};
-++					uboot-env@170000 {
-++						label = "uboot-env";
-++						reg = <0x170000 0x40000>;
-++						read-only;
-++					};
-++					radio@1b0000 {
-++						label = "radio";
-++						reg = <0x1b0000 0x40000>;
-++						read-only;
-++					};
-++					os-image@1f0000 {
-++						label = "os-image";
-++						reg = <0x1f0000 0x200000>;
-++					};
-++					rootfs@3f0000 {
-++						label = "rootfs";
-++						reg = <0x3f0000 0x1b00000>;
-++					};
-++					defaultmac: default-mac@1ef0000 {
-++						label = "default-mac";
-++						reg = <0x1ef0000 0x00200>;
-++						read-only;
-++					};
-++					pin@1ef0200 {
-++						label = "pin";
-++						reg = <0x1ef0200 0x00200>;
-++						read-only;
-++					};
-++					product-info@1ef0400 {
-++						label = "product-info";
-++						reg = <0x1ef0400 0x0fc00>;
-++						read-only;
-++					};
-++					partition-table@1f00000 {
-++						label = "partition-table";
-++						reg = <0x1f00000 0x10000>;
-++						read-only;
-++					};
-++					soft-version@1f10000 {
-++						label = "soft-version";
-++						reg = <0x1f10000 0x10000>;
-++						read-only;
-++					};
-++					support-list@1f20000 {
-++						label = "support-list";
-++						reg = <0x1f20000 0x10000>;
-++						read-only;
-++					};
-++					profile@1f30000 {
-++						label = "profile";
-++						reg = <0x1f30000 0x10000>;
-++						read-only;
-++					};
-++					default-config@1f40000 {
-++						label = "default-config";
-++						reg = <0x1f40000 0x10000>;
-++						read-only;
-++					};
-++					user-config@1f50000 {
-++						label = "user-config";
-++						reg = <0x1f50000 0x40000>;
-++						read-only;
-++					};
-++					qos-db@1f90000 {
-++						label = "qos-db";
-++						reg = <0x1f90000 0x40000>;
-++						read-only;
-++					};
-++					usb-config@1fd0000 {
-++						label = "usb-config";
-++						reg = <0x1fd0000 0x10000>;
-++						read-only;
-++					};
-++					log@1fe0000 {
-++						label = "log";
-++						reg = <0x1fe0000 0x20000>;
-++						read-only;
-++					};
-++				};
-++			};
-++		};
-++
-++		phy@100f8800 {		/* USB3 port 1 HS phy */
-++			status = "ok";
-++		};
-++
-++		phy@100f8830 {		/* USB3 port 1 SS phy */
-++			status = "ok";
-++		};
-++
-++		phy@110f8800 {		/* USB3 port 0 HS phy */
-++			status = "ok";
-++		};
-++
-++		phy@110f8830 {		/* USB3 port 0 SS phy */
-++			status = "ok";
-++		};
-++
-++		usb30@0 {
-++			status = "ok";
-++		};
-++
-++		usb30@1 {
-++			status = "ok";
-++		};
-++
-++		pcie0: pci@1b500000 {
-++			status = "ok";
-++			phy-tx0-term-offset = <7>;
-++		};
-++
-++		pcie1: pci@1b700000 {
-++			status = "ok";
-++			phy-tx0-term-offset = <7>;
-++		};
-++
-++		mdio0: mdio {
-++			compatible = "virtual,mdio-gpio";
-++			#address-cells = <1>;
-++			#size-cells = <0>;
-++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-++			pinctrl-0 = <&mdio0_pins>;
-++			pinctrl-names = "default";
-++
-++			phy0: ethernet-phy@0 {
-++				device_type = "ethernet-phy";
-++				reg = <0>;
-++				qca,ar8327-initvals = <
-++					0x00004 0x7600000   /* PAD0_MODE */
-++					0x00008 0x1000000   /* PAD5_MODE */
-++					0x0000c 0x80        /* PAD6_MODE */
-++					0x000e4 0xaa545     /* MAC_POWER_SEL */
-++					0x000e0 0xc74164de  /* SGMII_CTRL */
-++					0x0007c 0x4e        /* PORT0_STATUS */
-++					0x00094 0x4e        /* PORT6_STATUS */
-++					>;
-++			};
-++
-++			phy4: ethernet-phy@4 {
-++				device_type = "ethernet-phy";
-++				reg = <4>;
-++			};
-++		};
-++
-++		gmac1: ethernet@37200000 {
-++			status = "ok";
-++			phy-mode = "rgmii";
-++			qcom,id = <1>;
-++
-++			pinctrl-0 = <&rgmii2_pins>;
-++			pinctrl-names = "default";
-++
-++			mtd-mac-address = <&defaultmac 0x8>;
-++			mtd-mac-address-increment = <1>;
-++
-++			fixed-link {
-++				speed = <1000>;
-++				full-duplex;
-++			};
-++		};
-++
-++		gmac2: ethernet@37400000 {
-++			status = "ok";
-++			phy-mode = "sgmii";
-++			qcom,id = <2>;
-++
-++			mtd-mac-address = <&defaultmac 0x8>;
-++
-++			fixed-link {
-++				speed = <1000>;
-++				full-duplex;
-++			};
-++		};
-++	};
-++
-++	gpio-keys {
-++		compatible = "gpio-keys";
-++
-++		wifi {
-++			label = "wifi";
-++			gpios = <&qcom_pinmux 49 1>;
-++			linux,code = <KEY_WLAN>;
-++		};
-++
-++		reset {
-++			label = "reset";
-++			gpios = <&qcom_pinmux 64 1>;
-++			linux,code = <KEY_RESTART>;
-++		};
-++
-++		wps {
-++			label = "wps";
-++			gpios = <&qcom_pinmux 65 1>;
-++			linux,code = <KEY_WPS_BUTTON>;
-++		};
-++                ledgeneral {
-++			label = "ledgeneral";
-++			gpios = <&qcom_pinmux 16 1>;
-++			linux,code = <KEY_DOLLAR>;
-++		};
-++	};
-++
-++	gpio-leds {
-++		compatible = "gpio-leds";
-++
-++		lan {
-++			label = "lan:blue";
-++			gpios = <&qcom_pinmux 6 0>;
-++		};
-++                usb4 {
-++			label = "usb_4:blue";
-++			gpios = <&qcom_pinmux 7 0>;
-++		};
-++                usb2 {
-++			label = "usb_2:blue";
-++			gpios = <&qcom_pinmux 8 0>;
-++		};
-++                wps {
-++			label = "wps:blue";
-++			gpios = <&qcom_pinmux 9 0>;
-++		};
-++                wan_blue {
-++			label = "wan:blue";
-++			gpios = <&qcom_pinmux 33 1>;
-++		};
-++                status {
-++			label = "status:blue";
-++			gpios = <&qcom_pinmux 53 0>;
-++			default-state = "on";
-++		};
-++                ledgnr {
-++			label = "ledgnr:blue";
-++			gpios = <&qcom_pinmux 66 0>;
-++		};
-++        };
-++};
-++
-++&adm_dma {
-++	status = "ok";
-++};