bcm63xx: add preliminary support for bcm6328

SVN-Revision: 31878

21 files changed, 1364 insertions, 18 deletions

diff --git a/target/linux/brcm63xx/config-3.3 b/target/linux/brcm63xx/config-3.3
index 78ce377..c3e224d 100644
--- a/target/linux/brcm63xx/config-3.3
+++ b/target/linux/brcm63xx/config-3.3
@@ -3,10 +3,10 @@ CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
 CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
 CONFIG_BCM63XX=y
+# CONFIG_BCM63XX_CPU_6328 is not set
 CONFIG_BCM63XX_CPU_6338=y
 CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
@@ -87,8 +87,8 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_KEXEC=y
-# CONFIG_LANTIQ is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MACHINE is not set
@@ -109,8 +109,10 @@ CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI=y
+# CONFIG_PCIEPORTBUS is not set
 CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
diff --git a/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch b/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch
new file mode 100644
index 0000000..9006f1a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch
@@ -0,0 +1,21 @@
+From a3f65b46e32acd29c613b35fab588e4d28e5d432 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 13:11:19 +0200
+Subject: [PATCH 48/79] MIPS: expose PCIe drivers for MIPS
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/Kconfig |    2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2392,6 +2392,8 @@ config PCI_DOMAINS
+ 
+ source "drivers/pci/Kconfig"
+ 
++source "drivers/pci/pcie/Kconfig"
++
+ #
+ # ISA support is now enabled via select.  Too many systems still have the one
+ # or other ISA chip on the board that users don't know about so don't expect
diff --git a/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch b/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch
new file mode 100644
index 0000000..30adbd1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch
@@ -0,0 +1,47 @@
+From d831de57b1995eff51f43310b4bbfa85b1a3df42 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 30 Dec 2011 02:37:47 +0100
+Subject: [PATCH 38/79] MIPS: BCM63XX: use the Chip ID register for
+ identifying the SoC
+
+Newer BCM63XX SoCs use virtually the same cpu ID. But since they all have
+the Chip ID register at the same location, we can use that to identify
+the SoC we are running on.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/cpu.c |   20 ++++++++++++--------
+ 1 file changed, 12 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -228,17 +228,21 @@ void __init bcm63xx_cpu_init(void)
+ 		bcm63xx_irqs = bcm6345_irqs;
+ 		break;
+ 	case CPU_BMIPS4350:
+-		switch (read_c0_prid() & 0xf0) {
+-		case 0x10:
++		if ((read_c0_prid() & 0xf0) == 0x10) {
+ 			expected_cpu_id = BCM6358_CPU_ID;
+ 			bcm63xx_regs_base = bcm6358_regs_base;
+ 			bcm63xx_irqs = bcm6358_irqs;
+-			break;
+-		case 0x30:
+-			expected_cpu_id = BCM6368_CPU_ID;
+-			bcm63xx_regs_base = bcm6368_regs_base;
+-			bcm63xx_irqs = bcm6368_irqs;
+-			break;
++		} else {
++			/* all newer chips have the same chip id location */
++			u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
++
++			switch (chip_id) {
++			case BCM6368_CPU_ID:
++				expected_cpu_id = BCM6368_CPU_ID;
++				bcm63xx_regs_base = bcm6368_regs_base;
++				bcm63xx_irqs = bcm6368_irqs;
++				break;
++			}
+ 		}
+ 		break;
+ 	}
diff --git a/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch b/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch
new file mode 100644
index 0000000..83ccf62
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch
@@ -0,0 +1,107 @@
+From 48d3ed67982d2d1cecb5b33bf396d21f6fd7b088 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 14 Jun 2011 21:14:39 +0200
+Subject: [PATCH 39/79] MIPS: BCM63XX: add MISC register set definition
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |   10 +++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |    2 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   10 ++++++++++
+ 3 files changed, 21 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -129,7 +129,8 @@ enum bcm63xx_regs_set {
+ 	RSET_PCMDMA,
+ 	RSET_PCMDMAC,
+ 	RSET_PCMDMAS,
+-	RSET_TRNG
++	RSET_TRNG,
++	RSET_MISC
+ };
+ 
+ #define RSET_DSL_LMEM_SIZE		(64 * 1024 * 4)
+@@ -198,6 +199,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6338_PCMDMAC_BASE		(0xdeadbeef)
+ #define BCM_6338_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6338_TRNG_BASE		(0xdeadbeef)
++#define BCM_6338_MISC_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6345 register sets base address
+@@ -242,6 +244,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_PCMDMAC_BASE		(0xdeadbeef)
+ #define BCM_6345_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6345_TRNG_BASE		(0xdeadbeef)
++#define BCM_6345_MISC_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6348 register sets base address
+@@ -283,6 +286,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6348_PCMDMAC_BASE		(0xdeadbeef)
+ #define BCM_6348_PCMDMAS_BASE		(0xdeadbeef)
+ #define BCM_6348_TRNG_BASE		(0xdeadbeef)
++#define BCM_6348_MISC_BASE		(0xdeadbeef)
+ 
+ /*
+  * 6358 register sets base address
+@@ -324,6 +328,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_PCMDMAC_BASE		(0xfffe1900)
+ #define BCM_6358_PCMDMAS_BASE		(0xfffe1a00)
+ #define BCM_6358_TRNG_BASE		(0xdeadbeef)
++#define BCM_6358_MISC_BASE		(0xdeadbeef)
+ 
+ 
+ /*
+@@ -366,6 +371,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_PCMDMAC_BASE		(0xb0005a00)
+ #define BCM_6368_PCMDMAS_BASE		(0xb0005c00)
+ #define BCM_6368_TRNG_BASE		(0xb0004180)
++#define BCM_6368_MISC_BASE		(0xdeadbeef)
+ 
+ 
+ extern const unsigned long *bcm63xx_regs_base;
+@@ -412,6 +418,7 @@ extern const unsigned long *bcm63xx_regs
+ 	__GEN_RSET_BASE(__cpu, PCMDMAC)					\
+ 	__GEN_RSET_BASE(__cpu, PCMDMAS)					\
+ 	__GEN_RSET_BASE(__cpu, TRNG)					\
++	__GEN_RSET_BASE(__cpu, MISC)					\
+ 	}
+ 
+ #define __GEN_CPU_REGS_TABLE(__cpu)					\
+@@ -451,6 +458,7 @@ extern const unsigned long *bcm63xx_regs
+ 	[RSET_PCMDMAC]		= BCM_## __cpu ##_PCMDMAC_BASE,		\
+ 	[RSET_PCMDMAS]		= BCM_## __cpu ##_PCMDMAS_BASE,		\
+ 	[RSET_TRNG]		= BCM_## __cpu ##_TRNG_BASE,		\
++	[RSET_MISC]		= BCM_## __cpu ##_MISC_BASE,		\
+ 
+ 
+ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -91,5 +91,7 @@
+ #define bcm_memc_writel(v, o)	bcm_rset_writel(RSET_MEMC, (v), (o))
+ #define bcm_ddr_readl(o)	bcm_rset_readl(RSET_DDR, (o))
+ #define bcm_ddr_writel(v, o)	bcm_rset_writel(RSET_DDR, (v), (o))
++#define bcm_misc_readl(o)	bcm_rset_readl(RSET_MISC, (o))
++#define bcm_misc_writel(v, o)	bcm_rset_writel(RSET_MISC, (v), (o))
+ 
+ #endif /* ! BCM63XX_IO_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1116,4 +1116,14 @@
+ #define TRNG_THRES			0x0c
+ #define TRNG_MASK			0x10
+ 
++/*************************************************************************
++ * _REG relative to RSET_MISC
++ *************************************************************************/
++
++#define MISC_STRAPBUS_6328_REG		0x240
++#define STRAPBUS_6328_FCVO_SHIFT	7
++#define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
++#define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)
++#define STRAPBUS_6328_BOOT_SEL_NAND	(0 << 28)
++
+ #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch
new file mode 100644
index 0000000..362848b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch
@@ -0,0 +1,472 @@
+From e7fd2a00f5d6c5e50976ed931c26fdbfbbacf835 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 14 Jun 2011 21:14:39 +0200
+Subject: [PATCH 40/79] MIPS: BCM63XX: add basic BCM6328 CPU support
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/Kconfig                         |    4 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   11 ++-
+ arch/mips/bcm63xx/cpu.c                           |   43 +++++++++
+ arch/mips/bcm63xx/dev-spi.c                       |    2 +-
+ arch/mips/bcm63xx/irq.c                           |   21 +++++
+ arch/mips/bcm63xx/prom.c                          |    4 +-
+ arch/mips/bcm63xx/setup.c                         |   13 ++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |  101 +++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |    2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   44 +++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |    1 +
+ 11 files changed, 238 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -1,6 +1,10 @@
+ menu "CPU support"
+ 	depends on BCM63XX
+ 
++config BCM63XX_CPU_6328
++	bool "support 6328 CPU"
++	select HW_HAS_PCI
++
+ config BCM63XX_CPU_6338
+ 	bool "support 6338 CPU"
+ 	select HW_HAS_PCI
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -760,9 +760,14 @@ void __init board_prom_init(void)
+ 	char cfe_version[32];
+ 	u32 val;
+ 
+-	/* read base address of boot chip select (0) */
+-	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-	val &= MPI_CSBASE_BASE_MASK;
++	/* read base address of boot chip select (0)
++	 * 6328 does not have MPI but boots from a fixed address */
++	if (BCMCPU_IS_6328())
++		val = 0x18000000;
++	else {
++		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++		val &= MPI_CSBASE_BASE_MASK;
++	}
+ 	boot_addr = (u8 *)KSEG1ADDR(val);
+ 
+ 	/* dump cfe version */
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -29,6 +29,14 @@ static u16 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+ 
++static const unsigned long bcm6328_regs_base[] = {
++	__GEN_CPU_REGS_TABLE(6328)
++};
++
++static const int bcm6328_irqs[] = {
++	__GEN_CPU_IRQ_TABLE(6328)
++};
++
+ static const unsigned long bcm6338_regs_base[] = {
+ 	__GEN_CPU_REGS_TABLE(6338)
+ };
+@@ -99,6 +107,33 @@ unsigned int bcm63xx_get_memory_size(voi
+ static unsigned int detect_cpu_clock(void)
+ {
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++	{
++		unsigned int tmp, mips_pll_fcvo;
++
++		tmp = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++		mips_pll_fcvo = (tmp & STRAPBUS_6328_FCVO_MASK)
++				>> STRAPBUS_6328_FCVO_SHIFT;
++
++		switch (mips_pll_fcvo) {
++		case 0x12:
++		case 0x14:
++		case 0x19:
++			return 160000000;
++		case 0x1c:
++			return 192000000;
++		case 0x13:
++		case 0x15:
++			return 200000000;
++		case 0x1a:
++			return 384000000;
++		case 0x16:
++			return 400000000;
++		default:
++			return 320000000;
++		}
++
++	}
+ 	case BCM6338_CPU_ID:
+ 		/* BCM6338 has a fixed 240 Mhz frequency */
+ 		return 240000000;
+@@ -170,6 +205,9 @@ static unsigned int detect_memory_size(v
+ 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+ 	u32 val;
+ 
++	if (BCMCPU_IS_6328())
++		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
++
+ 	if (BCMCPU_IS_6345()) {
+ 		val = bcm_sdram_readl(SDRAM_MBASE_REG);
+ 		return (val * 8 * 1024 * 1024);
+@@ -237,6 +275,11 @@ void __init bcm63xx_cpu_init(void)
+ 			u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
+ 
+ 			switch (chip_id) {
++			case BCM6328_CPU_ID:
++				expected_cpu_id = BCM6328_CPU_ID;
++				bcm63xx_regs_base = bcm6328_regs_base;
++				bcm63xx_irqs = bcm6328_irqs;
++				break;
+ 			case BCM6368_CPU_ID:
+ 				expected_cpu_id = BCM6368_CPU_ID;
+ 				bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -87,7 +87,7 @@ int __init bcm63xx_spi_register(void)
+ {
+ 	struct clk *periph_clk;
+ 
+-	if (BCMCPU_IS_6345())
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ 		return -ENODEV;
+ 
+ 	periph_clk = clk_get(NULL, "periph");
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(uns
+ static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+ 
+ #ifndef BCMCPU_RUNTIME_DETECT
++#ifdef CONFIG_BCM63XX_CPU_6328
++#define irq_stat_reg		PERF_IRQSTAT_6328_REG
++#define irq_mask_reg		PERF_IRQMASK_6328_REG
++#define irq_bits		64
++#define is_ext_irq_cascaded	1
++#define ext_irq_start		(BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
++#define ext_irq_end		(BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
++#define ext_irq_count		4
++#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6328
++#define ext_irq_cfg_reg2	0
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ #define irq_stat_reg		PERF_IRQSTAT_6338_REG
+ #define irq_mask_reg		PERF_IRQMASK_6338_REG
+@@ -118,6 +129,16 @@ static void bcm63xx_init_irq(void)
+ 	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6328_REG;
++		irq_mask_addr += PERF_IRQMASK_6328_REG;
++		irq_bits = 64;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
++		break;
+ 	case BCM6338_CPU_ID:
+ 		irq_stat_addr += PERF_IRQSTAT_6338_REG;
+ 		irq_mask_addr += PERF_IRQMASK_6338_REG;
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -26,7 +26,9 @@ void __init prom_init(void)
+ 	bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
+ 
+ 	/* disable all hardware blocks clock for now */
+-	if (BCMCPU_IS_6338())
++	if (BCMCPU_IS_6328())
++		mask = CKCTL_6328_ALL_SAFE_EN;
++	else if (BCMCPU_IS_6338())
+ 		mask = CKCTL_6338_ALL_SAFE_EN;
+ 	else if (BCMCPU_IS_6345())
+ 		mask = CKCTL_6345_ALL_SAFE_EN;
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
+ 
+ 	/* mask and clear all external irq */
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
++		break;
+ 	case BCM6338_CPU_ID:
+ 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
+ 		break;
+@@ -101,9 +104,13 @@ void bcm63xx_machine_reboot(void)
+ 		bcm6348_a1_reboot();
+ 
+ 	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+-	reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+-	reg |= SYS_PLL_SOFT_RESET;
+-	bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
++	if (BCMCPU_IS_6328()) {
++		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
++	} else {
++		reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
++		reg |= SYS_PLL_SOFT_RESET;
++		bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
++	}
+ 	while (1)
+ 		;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -9,6 +9,7 @@
+  * compile time if only one CPU support is enabled (idea stolen from
+  * arm mach-types)
+  */
++#define BCM6328_CPU_ID		0x6328
+ #define BCM6338_CPU_ID		0x6338
+ #define BCM6345_CPU_ID		0x6345
+ #define BCM6348_CPU_ID		0x6348
+@@ -20,6 +21,19 @@ u16 __bcm63xx_get_cpu_id(void);
+ u16 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+ 
++#ifdef CONFIG_BCM63XX_CPU_6328
++# ifdef bcm63xx_get_cpu_id
++#  undef bcm63xx_get_cpu_id
++#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
++#  define BCMCPU_RUNTIME_DETECT
++# else
++#  define bcm63xx_get_cpu_id()	BCM6328_CPU_ID
++# endif
++# define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
++#else
++# define BCMCPU_IS_6328()	(0)
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ # ifdef bcm63xx_get_cpu_id
+ #  undef bcm63xx_get_cpu_id
+@@ -157,6 +171,49 @@ enum bcm63xx_regs_set {
+ #define RSET_TRNG_SIZE			20
+ 
+ /*
++ * 6328 register sets base address
++ */
++#define BCM_6328_DSL_LMEM_BASE		(0xdeadbeef)
++#define BCM_6328_PERF_BASE		(0xb0000000)
++#define BCM_6328_TIMER_BASE		(0xb0000040)
++#define BCM_6328_WDT_BASE		(0xb000005c)
++#define BCM_6328_UART0_BASE             (0xb0000100)
++#define BCM_6328_UART1_BASE		(0xb0000120)
++#define BCM_6328_GPIO_BASE		(0xb0000080)
++#define BCM_6328_SPI_BASE		(0xdeadbeef)
++#define BCM_6328_UDC0_BASE		(0xdeadbeef)
++#define BCM_6328_USBDMA_BASE		(0xdeadbeef)
++#define BCM_6328_OHCI0_BASE		(0xdeadbeef)
++#define BCM_6328_OHCI_PRIV_BASE		(0xdeadbeef)
++#define BCM_6328_USBH_PRIV_BASE		(0xdeadbeef)
++#define BCM_6328_MPI_BASE		(0xdeadbeef)
++#define BCM_6328_PCMCIA_BASE		(0xdeadbeef)
++#define BCM_6328_SDRAM_REGS_BASE	(0xdeadbeef)
++#define BCM_6328_DSL_BASE		(0xb0001900)
++#define BCM_6328_UBUS_BASE		(0xdeadbeef)
++#define BCM_6328_ENET0_BASE		(0xdeadbeef)
++#define BCM_6328_ENET1_BASE		(0xdeadbeef)
++#define BCM_6328_ENETDMA_BASE		(0xb000d800)
++#define BCM_6328_ENETDMAC_BASE		(0xb000da00)
++#define BCM_6328_ENETDMAS_BASE		(0xb000dc00)
++#define BCM_6328_ENETSW_BASE		(0xb0e00000)
++#define BCM_6328_EHCI0_BASE		(0x10002500)
++#define BCM_6328_SDRAM_BASE		(0xdeadbeef)
++#define BCM_6328_MEMC_BASE		(0xdeadbeef)
++#define BCM_6328_DDR_BASE		(0xb0003000)
++#define BCM_6328_M2M_BASE		(0xdeadbeef)
++#define BCM_6328_ATM_BASE		(0xdeadbeef)
++#define BCM_6328_XTM_BASE		(0xdeadbeef)
++#define BCM_6328_XTMDMA_BASE		(0xb000b800)
++#define BCM_6328_XTMDMAC_BASE		(0xdeadbeef)
++#define BCM_6328_XTMDMAS_BASE		(0xdeadbeef)
++#define BCM_6328_PCM_BASE		(0xb000a800)
++#define BCM_6328_PCMDMA_BASE		(0xdeadbeef)
++#define BCM_6328_PCMDMAC_BASE		(0xdeadbeef)
++#define BCM_6328_PCMDMAS_BASE		(0xdeadbeef)
++#define BCM_6328_TRNG_BASE		(0xdeadbeef)
++#define BCM_6328_MISC_BASE		(0xb0001800)
++/*
+  * 6338 register sets base address
+  */
+ #define BCM_6338_DSL_LMEM_BASE		(0xfff00000)
+@@ -466,6 +523,9 @@ static inline unsigned long bcm63xx_regs
+ #ifdef BCMCPU_RUNTIME_DETECT
+ 	return bcm63xx_regs_base[set];
+ #else
++#ifdef CONFIG_BCM63XX_CPU_6328
++	__GEN_RSET(6328)
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	__GEN_RSET(6338)
+ #endif
+@@ -520,6 +580,47 @@ enum bcm63xx_irq {
+ };
+ 
+ /*
++ * 6328 irqs
++ */
++#define BCM_6328_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
++
++#define BCM_6328_TIMER_IRQ		(IRQ_INTERNAL_BASE + 31)
++#define BCM_6328_SPI_IRQ		0
++#define BCM_6328_UART0_IRQ		(IRQ_INTERNAL_BASE + 28)
++#define BCM_6328_UART1_IRQ		(BCM_6328_HIGH_IRQ_BASE + 7)
++#define BCM_6328_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
++#define BCM_6328_UDC0_IRQ		0
++#define BCM_6328_ENET0_IRQ		0
++#define BCM_6328_ENET1_IRQ		0
++#define BCM_6328_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
++#define BCM_6328_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 9)
++#define BCM_6328_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
++#define BCM_6328_PCMCIA_IRQ		0
++#define BCM_6328_ENET0_RXDMA_IRQ	0
++#define BCM_6328_ENET0_TXDMA_IRQ	0
++#define BCM_6328_ENET1_RXDMA_IRQ	0
++#define BCM_6328_ENET1_TXDMA_IRQ	0
++#define BCM_6328_PCI_IRQ		(IRQ_INTERNAL_BASE + 23)
++#define BCM_6328_ATM_IRQ		0
++#define BCM_6328_ENETSW_RXDMA0_IRQ	(BCM_6328_HIGH_IRQ_BASE + 0)
++#define BCM_6328_ENETSW_RXDMA1_IRQ	(BCM_6328_HIGH_IRQ_BASE + 1)
++#define BCM_6328_ENETSW_RXDMA2_IRQ	(BCM_6328_HIGH_IRQ_BASE + 2)
++#define BCM_6328_ENETSW_RXDMA3_IRQ	(BCM_6328_HIGH_IRQ_BASE + 3)
++#define BCM_6328_ENETSW_TXDMA0_IRQ	(BCM_6328_HIGH_IRQ_BASE + 4)
++#define BCM_6328_ENETSW_TXDMA1_IRQ	(BCM_6328_HIGH_IRQ_BASE + 5)
++#define BCM_6328_ENETSW_TXDMA2_IRQ	(BCM_6328_HIGH_IRQ_BASE + 6)
++#define BCM_6328_ENETSW_TXDMA3_IRQ	(BCM_6328_HIGH_IRQ_BASE + 7)
++#define BCM_6328_XTM_IRQ		(BCM_6328_HIGH_IRQ_BASE + 31)
++#define BCM_6328_XTM_DMA0_IRQ		(BCM_6328_HIGH_IRQ_BASE + 11)
++
++#define BCM_6328_PCM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 2)
++#define BCM_6328_PCM_DMA1_IRQ		(IRQ_INTERNAL_BASE + 3)
++#define BCM_6328_EXT_IRQ0		(IRQ_INTERNAL_BASE + 24)
++#define BCM_6328_EXT_IRQ1		(IRQ_INTERNAL_BASE + 25)
++#define BCM_6328_EXT_IRQ2		(IRQ_INTERNAL_BASE + 26)
++#define BCM_6328_EXT_IRQ3		(IRQ_INTERNAL_BASE + 27)
++
++/*
+  * 6338 irqs
+  */
+ #define BCM_6338_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		return 32;
+ 	case BCM6358_CPU_ID:
+ 		return 40;
+ 	case BCM6338_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -15,6 +15,30 @@
+ /* Clock Control register */
+ #define PERF_CKCTL_REG			0x4
+ 
++#define CKCTL_6328_PHYMIPS_EN		(1 << 0)
++#define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
++#define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
++#define CKCTL_6328_ADSL_EN		(1 << 3)
++#define CKCTL_6328_MIPS_EN		(1 << 4)
++#define CKCTL_6328_SAR_EN		(1 << 5)
++#define CKCTL_6328_PCM_EN		(1 << 6)
++#define CKCTL_6328_USBD_EN		(1 << 7)
++#define CKCTL_6328_USBH_EN		(1 << 8)
++#define CKCTL_6328_HSSPI_EN		(1 << 9)
++#define CKCTL_6328_PCIE_EN		(1 << 10)
++#define CKCTL_6328_ROBOSW_EN		(1 << 11)
++
++#define CKCTL_6328_ALL_SAFE_EN		(CKCTL_6328_PHYMIPS_EN |	\
++					CKCTL_6328_ADSL_QPROC_EN |	\
++					CKCTL_6328_ADSL_AFE_EN |	\
++					CKCTL_6328_ADSL_EN |		\
++					CKCTL_6328_SAR_EN  |		\
++					CKCTL_6328_PCM_EN  |		\
++					CKCTL_6328_USBD_EN |		\
++					CKCTL_6328_USBH_EN |		\
++					CKCTL_6328_ROBOSW_EN |		\
++					CKCTL_6328_PCIE_EN)
++
+ #define CKCTL_6338_ADSLPHY_EN		(1 << 0)
+ #define CKCTL_6338_MPI_EN		(1 << 1)
+ #define CKCTL_6338_DRAM_EN		(1 << 2)
+@@ -119,6 +143,7 @@
+ #define SYS_PLL_SOFT_RESET		0x1
+ 
+ /* Interrupt Mask register */
++#define PERF_IRQMASK_6328_REG		0x20
+ #define PERF_IRQMASK_6338_REG		0xc
+ #define PERF_IRQMASK_6345_REG		0xc
+ #define PERF_IRQMASK_6348_REG		0xc
+@@ -126,6 +151,7 @@
+ #define PERF_IRQMASK_6368_REG		0x20
+ 
+ /* Interrupt Status register */
++#define PERF_IRQSTAT_6328_REG		0x28
+ #define PERF_IRQSTAT_6338_REG		0x10
+ #define PERF_IRQSTAT_6345_REG		0x10
+ #define PERF_IRQSTAT_6348_REG		0x10
+@@ -133,6 +159,7 @@
+ #define PERF_IRQSTAT_6368_REG		0x28
+ 
+ /* External Interrupt Configuration register */
++#define PERF_EXTIRQ_CFG_REG_6328	0x18
+ #define PERF_EXTIRQ_CFG_REG_6338	0x14
+ #define PERF_EXTIRQ_CFG_REG_6345	0x14
+ #define PERF_EXTIRQ_CFG_REG_6348	0x14
+@@ -163,8 +190,21 @@
+ 
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG		0x28
++#define PERF_SOFTRESET_6328_REG		0x10
+ #define PERF_SOFTRESET_6368_REG		0x10
+ 
++#define SOFTRESET_6328_SPI_MASK		(1 << 0)
++#define SOFTRESET_6328_EPHY_MASK	(1 << 1)
++#define SOFTRESET_6328_SAR_MASK		(1 << 2)
++#define SOFTRESET_6328_ENETSW_MASK	(1 << 3)
++#define SOFTRESET_6328_USBS_MASK	(1 << 4)
++#define SOFTRESET_6328_USBH_MASK	(1 << 5)
++#define SOFTRESET_6328_PCM_MASK		(1 << 6)
++#define SOFTRESET_6328_PCIE_CORE_MASK	(1 << 7)
++#define SOFTRESET_6328_PCIE_MASK	(1 << 8)
++#define SOFTRESET_6328_PCIE_EXT_MASK	(1 << 9)
++#define SOFTRESET_6328_PCIE_HARD_MASK	(1 << 10)
++
+ #define SOFTRESET_6338_SPI_MASK		(1 << 0)
+ #define SOFTRESET_6338_ENET_MASK	(1 << 2)
+ #define SOFTRESET_6338_USBH_MASK	(1 << 3)
+@@ -308,6 +348,8 @@
+ /* Watchdog reset length register */
+ #define WDT_RSTLEN_REG			0x8
+ 
++/* Watchdog soft reset register (BCM6328 only) */
++#define WDT_SOFTRESET_REG		0xc
+ 
+ /*************************************************************************
+  * _REG relative to RSET_UARTx
+@@ -934,6 +976,8 @@
+  * _REG relative to RSET_DDR
+  *************************************************************************/
+ 
++#define DDR_CSEND_REG			0x8
++
+ #define DDR_DMIPSPLLCFG_REG		0x18
+ #define DMIPSPLLCFG_M1_SHIFT		0
+ #define DMIPSPLLCFG_M1_MASK		(0xff << DMIPSPLLCFG_M1_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -18,6 +18,7 @@ static inline int is_bcm63xx_internal_re
+ 		if (offset >= 0xfff00000)
+ 			return 1;
+ 		break;
++	case BCM6328_CPU_ID:
+ 	case BCM6368_CPU_ID:
+ 		if (offset >= 0xb0000000 && offset < 0xb1000000)
+ 			return 1;
diff --git a/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch
new file mode 100644
index 0000000..ca6d4d4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch
@@ -0,0 +1,25 @@
+From dc087ed1d9d4ae326a47e4a1eef3a079acf4a1f5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 14 Jun 2011 21:14:39 +0200
+Subject: [PATCH 41/79] MIPS: BCM63XX: add flash type detection for BCM6328
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -59,6 +59,12 @@ static int __init bcm63xx_detect_flash_t
+ 	u32 val;
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
++			return BCM63XX_FLASH_TYPE_SERIAL;
++		else
++			return BCM63XX_FLASH_TYPE_NAND;
+ 	case BCM6338_CPU_ID:
+ 	case BCM6345_CPU_ID:
+ 	case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
new file mode 100644
index 0000000..1418d65
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
@@ -0,0 +1,22 @@
+From c110865541e2d3782c412af9d48c016de5a64d9c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 14 Jun 2011 21:14:39 +0200
+Subject: [PATCH 42/79] MIPS: BCM63XX: allow second UART on BCM6328
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-uart.c |    3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/dev-uart.c
++++ b/arch/mips/bcm63xx/dev-uart.c
+@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigne
+ 	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+ 		return -ENODEV;
+ 
+-	if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
++	if (id == 1 && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
++	    !BCMCPU_IS_6368())
+ 		return -ENODEV;
+ 
+ 	if (id == 0) {
diff --git a/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch b/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch
new file mode 100644
index 0000000..fe343e0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch
@@ -0,0 +1,48 @@
+From f7d09679600b187fcfa1d70819e53f190fb1c231 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 03:08:11 +0200
+Subject: [PATCH 45/79] MIPS: BCM63XX: Move the PCI initialization into its
+ own function
+
+Also make the cpu check a bit more explicit.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/pci/pci-bcm63xx.c |   25 +++++++++++++++++--------
+ 1 file changed, 17 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -88,14 +88,10 @@ static void bcm63xx_int_cfg_writel(u32 v
+ 
+ void __iomem *pci_iospace_start;
+ 
+-int __init bcm63xx_pci_register(void)
++static int __init bcm63xx_register_pci(void)
+ {
+ 	unsigned int mem_size;
+ 	u32 val;
+-
+-	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
+-		return -ENODEV;
+-
+ 	/*
+ 	 * configuration  access are  done through  IO space,  remap 4
+ 	 * first bytes to access it from CPU.
+@@ -211,3 +207,16 @@ int __init bcm63xx_pci_register(void)
+ 			   "bcm63xx PCI IO space");
+ 	return 0;
+ }
++
++int __init bcm63xx_pci_register(void)
++{
++	switch (bcm63xx_get_cpu_id()) {
++	case BCM6348_CPU_ID:
++	case BCM6358_CPU_ID:
++	case BCM6368_CPU_ID:
++		return bcm63xx_register_pci();
++	default:
++		return -ENODEV;
++	}
++}
++
diff --git a/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch b/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch
new file mode 100644
index 0000000..cabb9bd
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch
@@ -0,0 +1,176 @@
+From 9a16718a325c1969422eb9d9b644eb89ce06692c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 03:41:02 +0200
+Subject: [PATCH 46/79] MIPS: BCM63XX: Add PCIe register set definitions
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    9 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |    6 +++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   54 +++++++++++++++++++++
+ 3 files changed, 69 insertions(+)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -122,6 +122,7 @@ enum bcm63xx_regs_set {
+ 	RSET_USBH_PRIV,
+ 	RSET_MPI,
+ 	RSET_PCMCIA,
++	RSET_PCIE,
+ 	RSET_DSL,
+ 	RSET_ENET0,
+ 	RSET_ENET1,
+@@ -188,6 +189,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6328_USBH_PRIV_BASE		(0xdeadbeef)
+ #define BCM_6328_MPI_BASE		(0xdeadbeef)
+ #define BCM_6328_PCMCIA_BASE		(0xdeadbeef)
++#define BCM_6328_PCIE_BASE		(0xb0e40000)
+ #define BCM_6328_SDRAM_REGS_BASE	(0xdeadbeef)
+ #define BCM_6328_DSL_BASE		(0xb0001900)
+ #define BCM_6328_UBUS_BASE		(0xdeadbeef)
+@@ -232,6 +234,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6338_USBH_PRIV_BASE		(0xdeadbeef)
+ #define BCM_6338_MPI_BASE		(0xfffe3160)
+ #define BCM_6338_PCMCIA_BASE		(0xdeadbeef)
++#define BCM_6338_PCIE_BASE		(0xdeadbeef)
+ #define BCM_6338_SDRAM_REGS_BASE	(0xfffe3100)
+ #define BCM_6338_DSL_BASE		(0xfffe1000)
+ #define BCM_6338_UBUS_BASE		(0xdeadbeef)
+@@ -279,6 +282,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_ENETSW_BASE		(0xdeadbeef)
+ #define BCM_6345_PCMCIA_BASE		(0xfffe2028)
+ #define BCM_6345_MPI_BASE		(0xfffe2000)
++#define BCM_6345_PCIE_BASE		(0xdeadbeef)
+ #define BCM_6345_OHCI0_BASE		(0xfffe2100)
+ #define BCM_6345_OHCI_PRIV_BASE		(0xfffe2200)
+ #define BCM_6345_USBH_PRIV_BASE		(0xdeadbeef)
+@@ -320,6 +324,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6348_USBH_PRIV_BASE		(0xdeadbeef)
+ #define BCM_6348_MPI_BASE		(0xfffe2000)
+ #define BCM_6348_PCMCIA_BASE		(0xfffe2054)
++#define BCM_6348_PCIE_BASE		(0xdeadbeef)
+ #define BCM_6348_SDRAM_REGS_BASE	(0xfffe2300)
+ #define BCM_6348_M2M_BASE		(0xfffe2800)
+ #define BCM_6348_DSL_BASE		(0xfffe3000)
+@@ -362,6 +367,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_USBH_PRIV_BASE		(0xfffe1500)
+ #define BCM_6358_MPI_BASE		(0xfffe1000)
+ #define BCM_6358_PCMCIA_BASE		(0xfffe1054)
++#define BCM_6358_PCIE_BASE		(0xdeadbeef)
+ #define BCM_6358_SDRAM_REGS_BASE	(0xfffe2300)
+ #define BCM_6358_M2M_BASE		(0xdeadbeef)
+ #define BCM_6358_DSL_BASE		(0xfffe3000)
+@@ -405,6 +411,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_USBH_PRIV_BASE		(0xb0001700)
+ #define BCM_6368_MPI_BASE		(0xb0001000)
+ #define BCM_6368_PCMCIA_BASE		(0xb0001054)
++#define BCM_6368_PCIE_BASE		(0xdeadbeef)
+ #define BCM_6368_SDRAM_REGS_BASE	(0xdeadbeef)
+ #define BCM_6368_M2M_BASE		(0xdeadbeef)
+ #define BCM_6368_DSL_BASE		(0xdeadbeef)
+@@ -453,6 +460,7 @@ extern const unsigned long *bcm63xx_regs
+ 	__GEN_RSET_BASE(__cpu, USBH_PRIV)				\
+ 	__GEN_RSET_BASE(__cpu, MPI)					\
+ 	__GEN_RSET_BASE(__cpu, PCMCIA)					\
++	__GEN_RSET_BASE(__cpu, PCIE)					\
+ 	__GEN_RSET_BASE(__cpu, DSL)					\
+ 	__GEN_RSET_BASE(__cpu, ENET0)					\
+ 	__GEN_RSET_BASE(__cpu, ENET1)					\
+@@ -493,6 +501,7 @@ extern const unsigned long *bcm63xx_regs
+ 	[RSET_USBH_PRIV]	= BCM_## __cpu ##_USBH_PRIV_BASE,	\
+ 	[RSET_MPI]		= BCM_## __cpu ##_MPI_BASE,		\
+ 	[RSET_PCMCIA]		= BCM_## __cpu ##_PCMCIA_BASE,		\
++	[RSET_PCIE]		= BCM_## __cpu ##_PCIE_BASE,		\
+ 	[RSET_DSL]		= BCM_## __cpu ##_DSL_BASE,		\
+ 	[RSET_ENET0]		= BCM_## __cpu ##_ENET0_BASE,		\
+ 	[RSET_ENET1]		= BCM_## __cpu ##_ENET1_BASE,		\
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -40,6 +40,10 @@
+ #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
+ 					BCM_CB_MEM_SIZE - 1)
+ 
++#define BCM_PCIE_MEM_BASE_PA		0x10f00000
++#define BCM_PCIE_MEM_SIZE		(16 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
++					BCM_PCIE_MEM_SIZE - 1)
+ 
+ /*
+  * Internal registers are accessed through KSEG3
+@@ -85,6 +89,8 @@
+ #define bcm_mpi_writel(v, o)	bcm_rset_writel(RSET_MPI, (v), (o))
+ #define bcm_pcmcia_readl(o)	bcm_rset_readl(RSET_PCMCIA, (o))
+ #define bcm_pcmcia_writel(v, o)	bcm_rset_writel(RSET_PCMCIA, (v), (o))
++#define bcm_pcie_readl(o)	bcm_rset_readl(RSET_PCIE, (o))
++#define bcm_pcie_writel(v, o)	bcm_rset_writel(RSET_PCIE, (v), (o))
+ #define bcm_sdram_readl(o)	bcm_rset_readl(RSET_SDRAM, (o))
+ #define bcm_sdram_writel(v, o)	bcm_rset_writel(RSET_SDRAM, (v), (o))
+ #define bcm_memc_readl(o)	bcm_rset_readl(RSET_MEMC, (o))
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1163,6 +1163,9 @@
+ /*************************************************************************
+  * _REG relative to RSET_MISC
+  *************************************************************************/
++#define MISC_SERDES_CTRL_REG		0x0
++#define SERDES_PCIE_EN			(1 << 0)
++#define SERDES_PCIE_EXD_EN		(1 << 15)
+ 
+ #define MISC_STRAPBUS_6328_REG		0x240
+ #define STRAPBUS_6328_FCVO_SHIFT	7
+@@ -1170,4 +1173,55 @@
+ #define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)
+ #define STRAPBUS_6328_BOOT_SEL_NAND	(0 << 28)
+ 
++/*************************************************************************
++ * _REG relative to RSET_PCIE
++ *************************************************************************/
++
++#define PCIE_CONFIG2_REG		0x408
++#define CONFIG2_BAR1_SIZE_EN		1
++#define CONFIG2_BAR1_SIZE_MASK		0xf
++
++#define PCIE_IDVAL3_REG			0x43c
++#define IDVAL3_CLASS_CODE_MASK		0xffffff
++#define IDVAL3_SUBCLASS_SHIFT		8
++#define IDVAL3_CLASS_SHIFT		16
++
++#define PCIE_DLSTATUS_REG		0x1048
++#define DLSTATUS_PHYLINKUP		(1 << 13)
++
++#define PCIE_BRIDGE_OPT1_REG		0x2820
++#define OPT1_RD_BE_OPT_EN		(1 << 7)
++#define OPT1_RD_REPLY_BE_FIX_EN		(1 << 9)
++#define OPT1_PCIE_BRIDGE_HOLE_DET_EN	(1 << 11)
++#define OPT1_L1_INT_STATUS_MASK_POL	(1 << 12)
++
++#define PCIE_BRIDGE_OPT2_REG		0x2824
++#define OPT2_UBUS_UR_DECODE_DIS		(1 << 2)
++#define OPT2_TX_CREDIT_CHK_EN		(1 << 4)
++#define OPT2_CFG_TYPE1_BD_SEL		(1 << 7)
++#define OPT2_CFG_TYPE1_BUS_NO_SHIFT	16
++#define OPT2_CFG_TYPE1_BUS_NO_MASK	(0xff << OPT2_CFG_TYPE1_BUS_NO_SHIFT)
++
++#define PCIE_BRIDGE_BAR0_BASEMASK_REG	0x2828
++#define PCIE_BRIDGE_BAR1_BASEMASK_REG	0x2830
++#define BASEMASK_REMAP_EN		(1 << 0)
++#define BASEMASK_SWAP_EN		(1 << 1)
++#define BASEMASK_MASK_SHIFT		4
++#define BASEMASK_MASK_MASK		(0xfff << BASEMASK_MASK_SHIFT)
++#define BASEMASK_BASE_SHIFT		20
++#define BASEMASK_BASE_MASK		(0xfff << BASEMASK_BASE_SHIFT)
++
++#define PCIE_BRIDGE_BAR0_REBASE_ADDR_REG 0x282c
++#define PCIE_BRIDGE_BAR1_REBASE_ADDR_REG 0x2834
++#define REBASE_ADDR_BASE_SHIFT		20
++#define REBASE_ADDR_BASE_MASK		(0xfff << REBASE_ADDR_BASE_SHIFT)
++
++#define PCIE_BRIDGE_RC_INT_MASK_REG	0x2854
++#define PCIE_RC_INT_A			(1 << 0)
++#define PCIE_RC_INT_B			(1 << 1)
++#define PCIE_RC_INT_C			(1 << 2)
++#define PCIE_RC_INT_D			(1 << 3)
++
++#define PCIE_DEVICE_OFFSET		0x8000
++
+ #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch
new file mode 100644
index 0000000..c33aaa4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch
@@ -0,0 +1,240 @@
+From e170282d7d12f4a26f10d4b666b158d24810d2f6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 03:41:02 +0200
+Subject: [PATCH 47/79] MIPS: BCM63XX: Add PCIe Support for BCM6328
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/pci/ops-bcm63xx.c |   61 +++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.c |  112 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.h |    5 ++
+ 3 files changed, 178 insertions(+)
+
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -465,3 +465,64 @@ static void bcm63xx_fixup(struct pci_dev
+ 
+ DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
+ #endif
++
++static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
++{
++	switch (bus->number) {
++	case PCIE_BUS_BRIDGE:
++		return (PCI_SLOT(devfn) == 0);
++	case PCIE_BUS_DEVICE:
++		if (PCI_SLOT(devfn) == 0)
++			return bcm_pcie_readl(PCIE_DLSTATUS_REG)
++					& DLSTATUS_PHYLINKUP;
++	default:
++		return false;
++	}
++}
++
++static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn,
++			     int where, int size, u32 *val)
++{
++	u32 data;
++	u32 reg = where & ~3;
++
++	if (!bcm63xx_pcie_can_access(bus, devfn))
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	if (bus->number == PCIE_BUS_DEVICE)
++		reg += PCIE_DEVICE_OFFSET;
++
++	data = bcm_pcie_readl(reg);
++
++	*val = postprocess_read(data, where, size);
++
++	return PCIBIOS_SUCCESSFUL;
++
++}
++
++static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn,
++			      int where, int size, u32 val)
++{
++	u32 data;
++	u32 reg = where & ~3;
++
++	if (!bcm63xx_pcie_can_access(bus, devfn))
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	if (bus->number == PCIE_BUS_DEVICE)
++		reg += PCIE_DEVICE_OFFSET;
++
++
++	data = bcm_pcie_readl(reg);
++
++	data = preprocess_write(data, val, where, size);
++	bcm_pcie_writel(data, reg);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++
++struct pci_ops bcm63xx_pcie_ops = {
++	.read   = bcm63xx_pcie_read,
++	.write  = bcm63xx_pcie_write
++};
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -10,6 +10,7 @@
+ #include <linux/pci.h>
+ #include <linux/kernel.h>
+ #include <linux/init.h>
++#include <linux/delay.h>
+ #include <asm/bootinfo.h>
+ 
+ #include "pci-bcm63xx.h"
+@@ -65,6 +66,26 @@ struct pci_controller bcm63xx_cb_control
+ };
+ #endif
+ 
++static struct resource bcm_pcie_mem_resource = {
++	.name   = "bcm63xx PCIe memory space",
++	.start  = BCM_PCIE_MEM_BASE_PA,
++	.end    = BCM_PCIE_MEM_END_PA,
++	.flags  = IORESOURCE_MEM,
++};
++
++static struct resource bcm_pcie_io_resource = {
++	.name   = "bcm63xx PCIe IO space",
++	.start  = 0,
++	.end    = 0,
++	.flags  = 0,
++};
++
++struct pci_controller bcm63xx_pcie_controller = {
++	.pci_ops	= &bcm63xx_pcie_ops,
++	.io_resource	= &bcm_pcie_io_resource,
++	.mem_resource	= &bcm_pcie_mem_resource,
++};
++
+ static u32 bcm63xx_int_cfg_readl(u32 reg)
+ {
+ 	u32 tmp;
+@@ -88,6 +109,95 @@ static void bcm63xx_int_cfg_writel(u32 v
+ 
+ void __iomem *pci_iospace_start;
+ 
++static void __init bcm63xx_reset_pcie(void)
++{
++	u32 val;
++
++	/* enable clock */
++	val = bcm_perf_readl(PERF_CKCTL_REG);
++	val |= CKCTL_6328_PCIE_EN;
++	bcm_perf_writel(val, PERF_CKCTL_REG);
++
++	/* enable SERDES */
++	val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
++	val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
++	bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
++
++	/* reset the PCIe core */
++	val = bcm_perf_readl(PERF_SOFTRESET_6328_REG);
++
++	val &= ~SOFTRESET_6328_PCIE_MASK;
++	val &= ~SOFTRESET_6328_PCIE_CORE_MASK;
++	val &= ~SOFTRESET_6328_PCIE_HARD_MASK;
++	val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
++	bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++	mdelay(10);
++
++	val |= SOFTRESET_6328_PCIE_MASK;
++	val |= SOFTRESET_6328_PCIE_CORE_MASK;
++	val |= SOFTRESET_6328_PCIE_HARD_MASK;
++	bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++	mdelay(10);
++
++	val |= SOFTRESET_6328_PCIE_EXT_MASK;
++	bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++	mdelay(200);
++}
++
++static int __init bcm63xx_register_pcie(void)
++{
++	u32 val;
++
++	bcm63xx_reset_pcie();
++
++	/* configure the PCIe bridge */
++	val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
++	val |= OPT1_RD_BE_OPT_EN;
++	val |= OPT1_RD_REPLY_BE_FIX_EN;
++	val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
++	val |= OPT1_L1_INT_STATUS_MASK_POL;
++	bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
++
++	/* setup the interrupts */
++	val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
++	val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
++	bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
++
++	val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
++	/* enable credit checking and error checking */
++	val |= OPT2_TX_CREDIT_CHK_EN;
++	val |= OPT2_UBUS_UR_DECODE_DIS;
++
++	/* set device bus/func for the pcie device */
++	val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
++	val |= OPT2_CFG_TYPE1_BD_SEL;
++	bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
++
++	/* setup class code as bridge */
++	val = bcm_pcie_readl(PCIE_IDVAL3_REG);
++	val &= ~IDVAL3_CLASS_CODE_MASK;
++	val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
++	bcm_pcie_writel(val, PCIE_IDVAL3_REG);
++
++	/* disable bar1 size */
++	val = bcm_pcie_readl(PCIE_CONFIG2_REG);
++	val &= ~CONFIG2_BAR1_SIZE_MASK;
++	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
++
++	/* set bar0 to little endian */
++	val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
++	val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
++	val |= BASEMASK_REMAP_EN;
++	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
++
++	val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
++	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
++
++	register_pci_controller(&bcm63xx_pcie_controller);
++
++	return 0;
++}
++
+ static int __init bcm63xx_register_pci(void)
+ {
+ 	unsigned int mem_size;
+@@ -211,6 +321,8 @@ static int __init bcm63xx_register_pci(v
+ int __init bcm63xx_pci_register(void)
+ {
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		return bcm63xx_register_pcie();
+ 	case BCM6348_CPU_ID:
+ 	case BCM6358_CPU_ID:
+ 	case BCM6368_CPU_ID:
+--- a/arch/mips/pci/pci-bcm63xx.h
++++ b/arch/mips/pci/pci-bcm63xx.h
+@@ -13,11 +13,16 @@
+  */
+ #define CARDBUS_PCI_IDSEL	0x8
+ 
++
++#define PCIE_BUS_BRIDGE		0
++#define PCIE_BUS_DEVICE		1
++
+ /*
+  * defined in ops-bcm63xx.c
+  */
+ extern struct pci_ops bcm63xx_pci_ops;
+ extern struct pci_ops bcm63xx_cb_ops;
++extern struct pci_ops bcm63xx_pcie_ops;
+ 
+ /*
+  * defined in pci-bcm63xx.c
diff --git a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch b/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
index 279d013..636e183 100644
--- a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
+++ b/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
@@ -15,7 +15,7 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device.
 
 --- a/arch/mips/bcm63xx/Kconfig
 +++ b/arch/mips/bcm63xx/Kconfig
-@@ -4,26 +4,25 @@ menu "CPU support"
+@@ -8,26 +8,25 @@ config BCM63XX_CPU_6328
  config BCM63XX_CPU_6338
  	bool "support 6338 CPU"
  	select HW_HAS_PCI
@@ -66,7 +66,7 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device.
  #include <board_bcm963xx.h>
  #include <bcm_tag.h>
  
-@@ -906,6 +907,9 @@ int __init board_register_devices(void)
+@@ -911,6 +912,9 @@ int __init board_register_devices(void)
  	    !board_get_mac_address(board.enet1.mac_addr))
  		bcm63xx_enet_register(1, &board.enet1);
  
diff --git a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch b/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
index 9ca91be..5a13013 100644
--- a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
+++ b/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
@@ -15,7 +15,7 @@ Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device.
 
 --- a/arch/mips/bcm63xx/Kconfig
 +++ b/arch/mips/bcm63xx/Kconfig
-@@ -18,11 +18,13 @@ config BCM63XX_CPU_6358
+@@ -22,11 +22,13 @@ config BCM63XX_CPU_6358
  	bool "support 6358 CPU"
  	select HW_HAS_PCI
  	select USB_ARCH_HAS_OHCI if USB_SUPPORT
@@ -49,7 +49,7 @@ Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device.
  #include <board_bcm963xx.h>
  #include <bcm_tag.h>
  
-@@ -907,6 +908,9 @@ int __init board_register_devices(void)
+@@ -912,6 +913,9 @@ int __init board_register_devices(void)
  	    !board_get_mac_address(board.enet1.mac_addr))
  		bcm63xx_enet_register(1, &board.enet1);
  
diff --git a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
index f98c6ba..0f3b49b 100644
--- a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
+++ b/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -845,6 +845,8 @@ void __init board_prom_init(void)
+@@ -850,6 +850,8 @@ void __init board_prom_init(void)
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G3_EXT_MII |
  				GPIO_MODE_6348_G0_EXT_MII;
@@ -11,7 +11,7 @@
  	bcm_gpio_writel(val, GPIO_MODE_REG);
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -468,6 +468,8 @@
+@@ -510,6 +510,8 @@
  #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
  #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
  #define GPIO_MODE_6358_UTOPIA		(1 << 12)
diff --git a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch b/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
index 3d7d3e8..512f53f 100644
--- a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
+++ b/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
@@ -50,7 +50,7 @@ Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access.
  		if (ret)
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -140,7 +140,9 @@ enum bcm63xx_regs_set {
+@@ -156,7 +156,9 @@ enum bcm63xx_regs_set {
  #define BCM_6358_RSET_SPI_SIZE		1804
  #define BCM_6368_RSET_SPI_SIZE		1804
  #define RSET_ENET_SIZE			2048
diff --git a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch b/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
index 79ce729..b6e082a 100644
--- a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
+++ b/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
@@ -13,7 +13,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -910,6 +910,10 @@ int __init board_register_devices(void)
+@@ -915,6 +915,10 @@ int __init board_register_devices(void)
  	    !board_get_mac_address(board.enet1.mac_addr))
  		bcm63xx_enet_register(1, &board.enet1);
  
@@ -205,7 +205,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
  #endif /* ! BCM63XX_DEV_ENET_H_ */
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -708,10 +708,60 @@
+@@ -750,10 +750,60 @@
   * _REG relative to RSET_ENETSW
   *************************************************************************/
  
diff --git a/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch
new file mode 100644
index 0000000..b0f55e0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch
@@ -0,0 +1,94 @@
+From 37d151859e09d09a950ad3ae615db1903bcc59d3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 13 Nov 2011 14:59:37 +0100
+Subject: [PATCH 43/79] bcm63xx_enet: fix lockup on BCM6328
+
+BCM6328 locks up on a maxburst size of 16, reduce it to 8 for BCM6328 and
+BCM6368.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c |   14 ++++++++------
+ drivers/net/ethernet/broadcom/bcm63xx_enet.h |    4 ++++
+ 2 files changed, 12 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -261,7 +261,6 @@ static int bcm_enet_refill_rx(struct net
+ 			if (!skb)
+ 				break;
+ 			priv->rx_skb[desc_idx] = skb;
+-
+ 			p = dma_map_single(&priv->pdev->dev, skb->data,
+ 					   priv->rx_skb_size,
+ 					   DMA_FROM_DEVICE);
+@@ -995,9 +994,9 @@ static int bcm_enet_open(struct net_devi
+ 	enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
+ 
+ 	/* set dma maximum burst len */
+-	enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++	enet_dmac_writel(priv, priv->dma_maxburst,
+ 			 ENETDMAC_MAXBURST_REG(priv->rx_chan));
+-	enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++	enet_dmac_writel(priv, priv->dma_maxburst,
+ 			 ENETDMAC_MAXBURST_REG(priv->tx_chan));
+ 
+ 	/* set correct transmit fifo watermark */
+@@ -1593,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene
+ 	 * it's appended
+ 	 */
+ 	priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
+-				  BCMENET_DMA_MAXBURST * 4);
++				  priv->dma_maxburst * 4);
+ 	return 0;
+ }
+ 
+@@ -1700,6 +1699,8 @@ static int __devinit bcm_enet_probe(stru
+ 		return -ENOMEM;
+ 	priv = netdev_priv(dev);
+ 
++	priv->dma_maxburst = bcm_enet_is_sw(priv) ?
++			BCMENETSW_DMA_MAXBURST : BCMENET_DMA_MAXBURST;
+ 	ret = compute_hw_mtu(priv, dev->mtu);
+ 	if (ret)
+ 		goto out;
+@@ -2263,9 +2264,9 @@ static int bcm_enetsw_open(struct net_de
+ 	enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
+ 
+ 	/* set dma maximum burst len */
+-	enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++	enet_dmac_writel(priv, priv->dma_maxburst,
+ 			 ENETDMAC_MAXBURST_REG(priv->rx_chan));
+-	enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++	enet_dmac_writel(priv, priv->dma_maxburst,
+ 			 ENETDMAC_MAXBURST_REG(priv->tx_chan));
+ 
+ 	/* set flow control low/high threshold to 1/3 / 2/3 */
+@@ -2727,6 +2728,7 @@ static int __devinit bcm_enetsw_probe(st
+ 	priv->irq_tx = irq_tx;
+ 	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
+ 	priv->tx_ring_size = BCMENET_DEF_TX_DESC;
++	priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
+ 
+ 	pd = pdev->dev.platform_data;
+ 	if (pd) {
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -17,6 +17,7 @@
+ 
+ /* maximum burst len for dma (4 bytes unit) */
+ #define BCMENET_DMA_MAXBURST	16
++#define BCMENETSW_DMA_MAXBURST	8
+ 
+ /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
+  * must be low enough so that a DMA transfer of above burst length can
+@@ -280,6 +281,9 @@ struct bcm_enet_priv {
+ 	/* number of dma desc in tx ring */
+ 	int tx_ring_size;
+ 
++	/* maximum dma burst size */
++	int dma_maxburst;
++
+ 	/* cpu view of rx dma ring */
+ 	struct bcm_enet_desc *tx_desc_cpu;
+ 
diff --git a/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch b/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
new file mode 100644
index 0000000..cf77679
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
@@ -0,0 +1,92 @@
+From 44e21f4c7c556573fff0432f7846086763df3455 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 14 Jun 2011 21:14:39 +0200
+Subject: [PATCH 44/79] MIPS: BCM63XX: add support for BCM6328 in bcm_enetsw
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c                      |   34 +++++++++++++++++++-------
+ arch/mips/bcm63xx/dev-enet.c                 |    4 +--
+ drivers/net/ethernet/broadcom/bcm63xx_enet.h |    2 +-
+ 3 files changed, 28 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -118,21 +118,37 @@ static struct clk clk_ephy = {
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-	if (!BCMCPU_IS_6368())
++	u32 mask;
++
++	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+ 		return;
+-	bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
+-			CKCTL_6368_SWPKT_USB_EN |
+-			CKCTL_6368_SWPKT_SAR_EN, enable);
++
++	if (BCMCPU_IS_6328())
++		mask = CKCTL_6328_ROBOSW_EN;
++	else
++		mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
++		       CKCTL_6368_SWPKT_SAR_EN;
++
++	bcm_hwclock_set(mask, enable);
+ 	if (enable) {
++		u32 reg;
+ 		u32 val;
+ 
++		if (BCMCPU_IS_6328()) {
++			reg = PERF_SOFTRESET_6328_REG;
++			mask = SOFTRESET_6328_ENETSW_MASK;
++		} else {
++			reg = PERF_SOFTRESET_6368_REG;
++			mask = SOFTRESET_6368_ENETSW_MASK;
++		}
++
+ 		/* reset switch core afer clock change */
+-		val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
+-		val &= ~SOFTRESET_6368_ENETSW_MASK;
+-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
++		val = bcm_perf_readl(reg);
++		val &= ~mask;
++		bcm_perf_writel(val, reg);
+ 		msleep(10);
+-		val |= SOFTRESET_6368_ENETSW_MASK;
+-		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
++		val |= mask;
++		bcm_perf_writel(val, reg);
+ 		msleep(10);
+ 	}
+ }
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -141,7 +141,7 @@ static int __init register_shared(void)
+ 	shared_res[0].end = shared_res[0].start;
+ 	shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+ 
+-	if (BCMCPU_IS_6368())
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
+ 		chan_count = 32;
+ 	else
+ 		chan_count = 16;
+@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+ 	int ret;
+ 
+-	if (!BCMCPU_IS_6368())
++	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+ 		return -ENODEV;
+ 
+ 	ret = register_shared();
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -368,7 +368,7 @@ struct bcm_enet_priv {
+ 
+ static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv)
+ {
+-	if (BCMCPU_IS_6368())
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
+ 		return 1;
+ 	else
+ 		return 0;
diff --git a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
index bd7c8b8..03eee87 100644
--- a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
+++ b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
@@ -551,7 +551,7 @@
  /*
   * Register a sane SPROMv2 to make the on-board
   * bcm4318 WLAN work
-@@ -848,6 +1368,9 @@ void __init board_prom_init(void)
+@@ -853,6 +1373,9 @@ void __init board_prom_init(void)
  		boardid_fixup(boot_addr);
  	}
  
diff --git a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
index 894ac37..c5898d2 100644
--- a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
+++ b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
@@ -72,9 +72,9 @@
  #endif
  
  #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1938,6 +1996,22 @@ void __init board_prom_init(void)
- 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 	val &= MPI_CSBASE_BASE_MASK;
+@@ -1943,6 +2001,22 @@ void __init board_prom_init(void)
+ 		val &= MPI_CSBASE_BASE_MASK;
+ 	}
  	boot_addr = (u8 *)KSEG1ADDR(val);
 +	printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
 +
@@ -105,7 +105,7 @@
  #include <bcm63xx_cpu.h>
  #include <bcm63xx_dev_flash.h>
  #include <bcm63xx_regs.h>
-@@ -98,6 +99,13 @@ int __init bcm63xx_flash_register(void)
+@@ -104,6 +105,13 @@ int __init bcm63xx_flash_register(void)
  		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
  		val &= MPI_CSBASE_BASE_MASK;
  
diff --git a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
index 8866ece..4b717bd 100644
--- a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
+++ b/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
@@ -102,7 +102,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
  };
  
  static void __init nb4_nvram_fixup(void)
-@@ -2280,12 +2358,25 @@ void __init board_prom_init(void)
+@@ -2285,12 +2363,25 @@ void __init board_prom_init(void)
  	if (board.has_pci) {
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G2_PCI;
diff --git a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
index 17666d8..49c52b3 100644
--- a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
+++ b/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
@@ -22,7 +22,7 @@
   * known 6338 boards
   */
  #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -2490,6 +2498,7 @@ void __init board_prom_init(void)
+@@ -2495,6 +2503,7 @@ void __init board_prom_init(void)
  
  	/* extract nvram data */
  	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));