general cleanup

SVN-Revision: 22352

11 files changed, 0 insertions, 14249 deletions

diff --git a/target/linux/at91/config-2.6.34 b/target/linux/at91/config-default
index 8abb310..8abb310 100644
--- a/target/linux/at91/config-2.6.34
+++ b/target/linux/at91/config-default
diff --git a/target/linux/at91/patches-2.6.25/000-at91patches.patch b/target/linux/at91/patches-2.6.25/000-at91patches.patch
deleted file mode 100644
index 06c2935..0000000
--- a/target/linux/at91/patches-2.6.25/000-at91patches.patch
+++ /dev/null
@@ -1,13019 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -12,18 +12,28 @@ config ARCH_AT91RM9200
- 
- config ARCH_AT91SAM9260
- 	bool "AT91SAM9260 or AT91SAM9XE"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
- 
- config ARCH_AT91SAM9261
- 	bool "AT91SAM9261"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
- 
- config ARCH_AT91SAM9263
- 	bool "AT91SAM9263"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
- 
- config ARCH_AT91SAM9RL
- 	bool "AT91SAM9RL"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
- 
- config ARCH_AT91CAP9
- 	bool "AT91CAP9"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
- 
- config ARCH_AT91X40
- 	bool "AT91x40"
-@@ -45,7 +55,7 @@ config MACH_ONEARM
- 	depends on ARCH_AT91RM9200
- 	help
- 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
--	  <http://www.ajeco.fi/products.htm>
-+	  <http://www.ajeco.fi/eng/products_e.htm>
- 
- config ARCH_AT91RM9200DK
- 	bool "Atmel AT91RM9200-DK Development board"
-@@ -94,7 +104,7 @@ config MACH_KB9200
- 	depends on ARCH_AT91RM9200
- 	help
- 	  Select this if you are using KwikByte's KB920x board.
--	  <http://kwikbyte.com/KB9202_description_new.htm>
-+	  <http://www.kwikbyte.com/KB9202.html>
- 
- config MACH_PICOTUX2XX
- 	bool "picotux 200"
-@@ -109,6 +119,38 @@ config MACH_KAFA
- 	help
- 	  Select this if you are using Sperry-Sun's KAFA board.
- 
-+config MACH_CHUB
-+	bool "Promwad Chub board"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using Promwad's Chub board.
-+
-+config MACH_HOMEMATIC
-+	bool "eQ-3 HomeMatic"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using eQ-3's HomeMatic device.
-+	  <http://www.eq-3.com>
-+
-+config MACH_ECBAT91
-+	bool "emQbit ECB_AT91 SBC"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using emQbit's ECB_AT91 board.
-+	  <http://wiki.emqbit.com/free-ecb-at91>
-+
-+config MACH_SWEDATMS
-+	bool "Sweda TMS Board"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using Sweda TMS-100 board.
-+
-+config MACH_TT9200
-+	bool "Toptech TT9200"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using Toptech's TT9200 board.
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -133,6 +175,34 @@ config MACH_AT91SAM9260EK
- 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
- 
-+config MACH_CAM60
-+	bool "KwikByte KB9260 (CAM60) board"
-+	depends on ARCH_AT91SAM9260
-+	help
-+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-+	  <http://www.kwikbyte.com/KB9260.html>
-+
-+config MACH_SAM9_L9260
-+	bool "Olimex SAM9-L9260 board"
-+	depends on ARCH_AT91SAM9260
-+	help
-+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-+	  <http://www.olimex.com/dev/sam9-L9260.html>
-+
-+config MACH_USB_A9260
-+	bool "CALAO USB-A9260"
-+	depends on ARCH_AT91SAM9260
-+	help
-+	  Select this if you are using a Calao Systems USB-A9260.
-+	  <http://www.calao-systems.com>
-+
-+config MACH_QIL_A9260
-+	bool "CALAO QIL-A9260 board"
-+	depends on ARCH_AT91SAM9260
-+	help
-+	  Select this if you are using a Calao Systems QIL-A9260 Board.
-+	  <http://www.calao-systems.com>
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -163,6 +233,13 @@ config MACH_AT91SAM9263EK
- 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
- 
-+config MACH_USB_A9263
-+	bool "CALAO USB-A9263"
-+	depends on ARCH_AT91SAM9263
-+	help
-+	  Select this if you are using a Calao Systems USB-A9263.
-+	  <http://www.calao-systems.com>
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -216,7 +293,7 @@ comment "AT91 Board Options"
- 
- config MTD_AT91_DATAFLASH_CARD
- 	bool "Enable DataFlash Card support"
--	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
-+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
- 	help
- 	  Enable support for the DataFlash card.
- 
-@@ -237,6 +314,19 @@ config AT91_PROGRAMMABLE_CLOCKS
- 	  Select this if you need to program one or more of the PCK0..PCK3
- 	  programmable clock outputs.
- 
-+config AT91_SLOW_CLOCK
-+	bool "Suspend-to-RAM disables main oscillator"
-+	depends on SUSPEND
-+	help
-+	  Select this if you want Suspend-to-RAM to save the most power
-+	  possible (without powering off the CPU) by disabling the PLLs
-+	  and main oscillator so that only the 32 KiHz clock is available.
-+
-+	  When only that slow-clock is available, some peripherals lose
-+	  functionality.  Many can't issue wakeup events unless faster
-+	  clocks are available.  Some lose their operating state and
-+	  need to be completely re-initialized.
-+
- config AT91_TIMER_HZ
-        int "Kernel HZ (jiffies per second)"
-        range 32 1024
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -28,16 +28,26 @@ obj-$(CONFIG_MACH_CARMEVA)	+= board-carm
- obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
- obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
-+obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
- obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
-+obj-$(CONFIG_MACH_HOMEMATIC)	+= board-homematic.o
-+obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
-+obj-$(CONFIG_MACH_SWEDATMS)	+= board-tms.o
-+obj-$(CONFIG_MACH_TT9200)	+= board-tt9200.o
- 
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
-+obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
-+obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
-+obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
- 
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
- 
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-+obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a9263.o
- 
- # AT91SAM9RL board-specific support
- obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
-@@ -50,9 +60,11 @@ obj-$(CONFIG_MACH_AT91EB01)	+= board-eb0
- 
- # Drivers
- obj-y				+= leds.o
-+obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
- 
- # Power Management
- obj-$(CONFIG_PM)		+= pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
- 
- ifeq ($(CONFIG_PM_DEBUG),y)
- CFLAGS_pm.o += -DDEBUG
---- a/arch/arm/mach-at91/at91cap9.c
-+++ b/arch/arm/mach-at91/at91cap9.c
-@@ -13,12 +13,15 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/pm.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/at91cap9.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- #include "clock.h"
-@@ -288,6 +291,12 @@ static void at91cap9_reset(void)
- 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
- 
-+static void at91cap9_poweroff(void)
-+{
-+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-+
- /* --------------------------------------------------------------------
-  *  AT91CAP9 processor initialization
-  * -------------------------------------------------------------------- */
-@@ -298,6 +307,7 @@ void __init at91cap9_initialize(unsigned
- 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
- 
- 	at91_arch_reset = at91cap9_reset;
-+	pm_power_off = at91cap9_poweroff;
- 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
- 
- 	/* Init clock subsystem */
-@@ -308,6 +318,12 @@ void __init at91cap9_initialize(unsigned
- 
- 	/* Register GPIO subsystem */
- 	at91_gpio_init(at91cap9_gpio, 4);
-+
-+	/* Remember the silicon revision */
-+	if (cpu_is_at91cap9_revB())
-+		system_rev = 0xB;
-+	else if (cpu_is_at91cap9_revC())
-+		system_rev = 0xC;
- }
- 
- /* --------------------------------------------------------------------
---- a/arch/arm/mach-at91/at91cap9_devices.c
-+++ b/arch/arm/mach-at91/at91cap9_devices.c
-@@ -13,18 +13,20 @@
-  */
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
- 
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
--#include <linux/mtd/physmap.h>
-+#include <linux/i2c-gpio.h>
- 
- #include <video/atmel_lcdc.h>
- 
- #include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91cap9.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91cap9_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
-@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct 
- 	if (!data)
- 		return;
- 
-+	if (cpu_is_at91cap9_revB())
-+		set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
-+
- 	/* Enable VBus control for UHP ports */
- 	for (i = 0; i < data->ports; i++) {
- 		if (data->vbus_pin[i])
-@@ -84,6 +89,110 @@ void __init at91_add_device_usbh(struct 
- 
- 
- /* --------------------------------------------------------------------
-+ *  USB HS Device (Gadget)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-+
-+static struct resource usba_udc_resources[] = {
-+	[0] = {
-+		.start	= AT91CAP9_UDPHS_FIFO,
-+		.end	= AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91CAP9_BASE_UDPHS,
-+		.end	= AT91CAP9_BASE_UDPHS + SZ_1K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[2] = {
-+		.start	= AT91CAP9_ID_UDPHS,
-+		.end	= AT91CAP9_ID_UDPHS,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-+	[idx] = {						\
-+		.name		= nam,				\
-+		.index		= idx,				\
-+		.fifo_size	= maxpkt,			\
-+		.nr_banks	= maxbk,			\
-+		.can_dma	= dma,				\
-+		.can_isoc	= isoc,				\
-+	}
-+
-+static struct usba_ep_data usba_udc_ep[] = {
-+	EP("ep0", 0,   64, 1, 0, 0),
-+	EP("ep1", 1, 1024, 3, 1, 1),
-+	EP("ep2", 2, 1024, 3, 1, 1),
-+	EP("ep3", 3, 1024, 2, 1, 1),
-+	EP("ep4", 4, 1024, 2, 1, 1),
-+	EP("ep5", 5, 1024, 2, 1, 0),
-+	EP("ep6", 6, 1024, 2, 1, 0),
-+	EP("ep7", 7, 1024, 2, 0, 0),
-+};
-+
-+#undef EP
-+
-+/*
-+ * pdata doesn't have room for any endpoints, so we need to
-+ * append room for the ones we need right after it.
-+ */
-+static struct {
-+	struct usba_platform_data pdata;
-+	struct usba_ep_data ep[8];
-+} usba_udc_data;
-+
-+static struct platform_device at91_usba_udc_device = {
-+	.name		= "atmel_usba_udc",
-+	.id		= -1,
-+	.dev		= {
-+				.platform_data	= &usba_udc_data.pdata,
-+	},
-+	.resource	= usba_udc_resources,
-+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-+};
-+
-+void __init at91_add_device_usba(struct usba_platform_data *data)
-+{
-+	if (cpu_is_at91cap9_revB()) {
-+		set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
-+		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-+						  AT91_MATRIX_UDPHS_BYPASS_LOCK);
-+	}
-+	else
-+		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-+
-+	/*
-+	 * Invalid pins are 0 on AT91, but the usba driver is shared
-+	 * with AVR32, which use negative values instead. Once/if
-+	 * gpio_is_valid() is ported to AT91, revisit this code.
-+	 */
-+	usba_udc_data.pdata.vbus_pin = -EINVAL;
-+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-+
-+	if (data && data->vbus_pin > 0) {
-+		at91_set_gpio_input(data->vbus_pin, 0);
-+		at91_set_deglitch(data->vbus_pin, 1);
-+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-+	}
-+
-+	/* Pullup pin is handled internally by USB device peripheral */
-+
-+	/* Clocks */
-+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-+
-+	platform_device_register(&at91_usba_udc_device);
-+}
-+#else
-+void __init at91_add_device_usba(struct usba_platform_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  Ethernet
-  * -------------------------------------------------------------------- */
- 
-@@ -246,7 +355,7 @@ void __init at91_add_device_mmc(short mm
- 		}
- 
- 		mmc0_data = *data;
--		at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
-+		at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
- 		platform_device_register(&at91cap9_mmc0_device);
- 	} else {			/* MCI1 */
- 		/* CLK */
-@@ -283,10 +392,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE	AT91_CHIPSELECT_3
- 
- static struct resource nand_resources[] = {
--	{
-+	[0] = {
- 		.start	= NAND_BASE,
- 		.end	= NAND_BASE + SZ_256M - 1,
- 		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91_BASE_SYS + AT91_ECC,
-+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+		.flags	= IORESOURCE_MEM,
- 	}
- };
- 
-@@ -344,6 +458,7 @@ void __init at91_add_device_nand(struct 
- void __init at91_add_device_nand(struct at91_nand_data *data) {}
- #endif
- 
-+
- /* --------------------------------------------------------------------
-  *  TWI (i2c)
-  * -------------------------------------------------------------------- */
-@@ -532,17 +647,64 @@ void __init at91_add_device_spi(struct s
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+	[0] = {
-+		.start	= AT91CAP9_BASE_TCB0,
-+		.end	= AT91CAP9_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91CAP9_ID_TCB,
-+		.end	= AT91CAP9_ID_TCB,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91cap9_tcb_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb_resources,
-+	.num_resources	= ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has one clock and irq for all three TC channels */
-+	at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
-+	platform_device_register(&at91cap9_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTT
-  * -------------------------------------------------------------------- */
- 
-+static struct resource rtt_resources[] = {
-+	{
-+		.start	= AT91_BASE_SYS + AT91_RTT,
-+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}
-+};
-+
- static struct platform_device at91cap9_rtt_device = {
- 	.name		= "at91_rtt",
--	.id		= -1,
--	.num_resources	= 0,
-+	.id		= 0,
-+	.resource	= rtt_resources,
-+	.num_resources	= ARRAY_SIZE(rtt_resources),
- };
- 
- static void __init at91_add_device_rtt(void)
- {
-+	device_init_wakeup(&at91cap9_rtt_device.dev, 1);
- 	platform_device_register(&at91cap9_rtt_device);
- }
- 
-@@ -660,6 +822,9 @@ void __init at91_add_device_lcdc(struct 
- 	if (!data)
- 		return;
- 
-+	if (cpu_is_at91cap9_revB())
-+		set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
-+
- 	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
- 	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
- 	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-@@ -990,7 +1155,7 @@ static inline void configure_usart2_pins
- 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-@@ -1031,8 +1196,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -1043,6 +1206,9 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-@@ -1060,6 +1226,7 @@ static int __init at91_add_standard_devi
- {
- 	at91_add_device_rtt();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -513,7 +513,18 @@ void __init at91_add_device_i2c(struct i
-  *  SPI
-  * -------------------------------------------------------------------- */
- 
--#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)		/* legacy SPI driver */
-+#define SPI_DEVNAME	"at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE)	/* SPI bitbanging driver */
-+#define SPI_DEVNAME	"at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)	/* new SPI driver */
-+#define SPI_DEVNAME	"atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = DMA_BIT_MASK(32);
- 
- static struct resource spi_resources[] = {
-@@ -530,7 +541,7 @@ static struct resource spi_resources[] =
- };
- 
- static struct platform_device at91rm9200_spi_device = {
--	.name		= "atmel_spi",
-+	.name		= SPI_DEVNAME,
- 	.id		= 0,
- 	.dev		= {
- 				.dma_mask		= &spi_dmamask,
-@@ -563,6 +574,12 @@ void __init at91_add_device_spi(struct s
- 		else
- 			at91_set_gpio_output(cs_pin, 1);
- 
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+		/*
-+		 * Force peripheral mode when using the legacy SPI driver.
-+		 */
-+		at91_set_A_periph(cs_pin, 0);
-+#endif
- 
- 		/* pass chip-select pin to driver */
- 		devices[i].controller_data = (void *) cs_pin;
-@@ -577,6 +594,90 @@ void __init at91_add_device_spi(struct s
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter blocks
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+	[0] = {
-+		.start	= AT91RM9200_BASE_TCB0,
-+		.end	= AT91RM9200_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91RM9200_ID_TC0,
-+		.end	= AT91RM9200_ID_TC0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91RM9200_ID_TC1,
-+		.end	= AT91RM9200_ID_TC1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91RM9200_ID_TC2,
-+		.end	= AT91RM9200_ID_TC2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91rm9200_tcb0_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb0_resources,
-+	.num_resources	= ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+	[0] = {
-+		.start	= AT91RM9200_BASE_TCB1,
-+		.end	= AT91RM9200_BASE_TCB1 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91RM9200_ID_TC3,
-+		.end	= AT91RM9200_ID_TC3,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91RM9200_ID_TC4,
-+		.end	= AT91RM9200_ID_TC4,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91RM9200_ID_TC5,
-+		.end	= AT91RM9200_ID_TC5,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91rm9200_tcb1_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 1,
-+	.resource	= tcb1_resources,
-+	.num_resources	= ARRAY_SIZE(tcb1_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has a separate clock and irq for each TC channel */
-+	at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-+	at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-+	at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
-+	platform_device_register(&at91rm9200_tcb0_device);
-+
-+	at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-+	at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-+	at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
-+	platform_device_register(&at91rm9200_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTC
-  * -------------------------------------------------------------------- */
- 
-@@ -589,6 +690,7 @@ static struct platform_device at91rm9200
- 
- static void __init at91_add_device_rtc(void)
- {
-+	device_init_wakeup(&at91rm9200_rtc_device.dev, 1);
- 	platform_device_register(&at91rm9200_rtc_device);
- }
- #else
-@@ -1019,7 +1121,7 @@ static inline void configure_usart3_pins
- 		at91_set_B_periph(AT91_PIN_PB0, 0);	/* RTS3 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1110,8 +1212,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -1122,6 +1222,9 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1141,6 +1244,7 @@ static int __init at91_add_standard_devi
- {
- 	at91_add_device_rtc();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- a/arch/arm/mach-at91/at91rm9200_time.c
-+++ b/arch/arm/mach-at91/at91rm9200_time.c
-@@ -136,8 +136,6 @@ clkevt32k_next_event(unsigned long delta
- 	u32		alm;
- 	int		status = 0;
- 
--	BUG_ON(delta < 2);
--
- 	/* Use "raw" primitives so we behave correctly on RT kernels. */
- 	raw_local_irq_save(flags);
- 
---- a/arch/arm/mach-at91/at91sam9260.c
-+++ b/arch/arm/mach-at91/at91sam9260.c
-@@ -11,6 +11,7 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/pm.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -18,6 +19,7 @@
- #include <asm/arch/at91sam9260.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- #include "clock.h"
-@@ -267,6 +269,11 @@ static void at91sam9260_reset(void)
- 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
- 
-+static void at91sam9260_poweroff(void)
-+{
-+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
- 
- /* --------------------------------------------------------------------
-  *  AT91SAM9260 processor initialization
-@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsig
- 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
- 
- 	at91_arch_reset = at91sam9260_reset;
-+	pm_power_off = at91sam9260_poweroff;
- 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- 			| (1 << AT91SAM9260_ID_IRQ2);
- 
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -19,8 +19,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9260.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91sam9260_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
-@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE	AT91_CHIPSELECT_3
- 
- static struct resource nand_resources[] = {
--	{
-+	[0] = {
- 		.start	= NAND_BASE,
- 		.end	= NAND_BASE + SZ_256M - 1,
- 		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91_BASE_SYS + AT91_ECC,
-+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+		.flags	= IORESOURCE_MEM,
- 	}
- };
- 
-@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct s
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter blocks
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9260_BASE_TCB0,
-+		.end	= AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9260_ID_TC0,
-+		.end	= AT91SAM9260_ID_TC0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91SAM9260_ID_TC1,
-+		.end	= AT91SAM9260_ID_TC1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91SAM9260_ID_TC2,
-+		.end	= AT91SAM9260_ID_TC2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9260_tcb0_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb0_resources,
-+	.num_resources	= ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9260_BASE_TCB1,
-+		.end	= AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9260_ID_TC3,
-+		.end	= AT91SAM9260_ID_TC3,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91SAM9260_ID_TC4,
-+		.end	= AT91SAM9260_ID_TC4,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91SAM9260_ID_TC5,
-+		.end	= AT91SAM9260_ID_TC5,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9260_tcb1_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 1,
-+	.resource	= tcb1_resources,
-+	.num_resources	= ARRAY_SIZE(tcb1_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has a separate clock and irq for each TC channel */
-+	at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-+	at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-+	at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
-+	platform_device_register(&at91sam9260_tcb0_device);
-+
-+	at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-+	at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-+	at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
-+	platform_device_register(&at91sam9260_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTT
-  * -------------------------------------------------------------------- */
- 
-@@ -553,13 +642,14 @@ static struct resource rtt_resources[] =
- 
- static struct platform_device at91sam9260_rtt_device = {
- 	.name		= "at91_rtt",
--	.id		= -1,
-+	.id		= 0,
- 	.resource	= rtt_resources,
- 	.num_resources	= ARRAY_SIZE(rtt_resources),
- };
- 
- static void __init at91_add_device_rtt(void)
- {
-+	device_init_wakeup(&at91sam9260_rtt_device.dev, 1);
- 	platform_device_register(&at91sam9260_rtt_device);
- }
- 
-@@ -962,7 +1052,7 @@ static inline void configure_usart5_pins
- 	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1073,8 +1163,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -1085,6 +1173,9 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1103,6 +1194,7 @@ static int __init at91_add_standard_devi
- {
- 	at91_add_device_rtt();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- a/arch/arm/mach-at91/at91sam9261.c
-+++ b/arch/arm/mach-at91/at91sam9261.c
-@@ -11,12 +11,14 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/pm.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- #include "clock.h"
-@@ -245,6 +247,11 @@ static void at91sam9261_reset(void)
- 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
- 
-+static void at91sam9261_poweroff(void)
-+{
-+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
- 
- /* --------------------------------------------------------------------
-  *  AT91SAM9261 processor initialization
-@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsig
- 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
- 
- 	at91_arch_reset = at91sam9261_reset;
-+	pm_power_off = at91sam9261_poweroff;
- 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- 			| (1 << AT91SAM9261_ID_IRQ2);
- 
---- a/arch/arm/mach-at91/at91sam9261_devices.c
-+++ b/arch/arm/mach-at91/at91sam9261_devices.c
-@@ -24,7 +24,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91sam9261_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
-@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct 
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9261_BASE_TCB0,
-+		.end	= AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9261_ID_TC0,
-+		.end	= AT91SAM9261_ID_TC0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91SAM9261_ID_TC1,
-+		.end	= AT91SAM9261_ID_TC1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91SAM9261_ID_TC2,
-+		.end	= AT91SAM9261_ID_TC2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9261_tcb_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb_resources,
-+	.num_resources	= ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has a separate clock and irq for each TC channel */
-+	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-+	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-+	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
-+	platform_device_register(&at91sam9261_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTT
-  * -------------------------------------------------------------------- */
- 
-@@ -561,13 +610,14 @@ static struct resource rtt_resources[] =
- 
- static struct platform_device at91sam9261_rtt_device = {
- 	.name		= "at91_rtt",
--	.id		= -1,
-+	.id		= 0,
- 	.resource	= rtt_resources,
- 	.num_resources	= ARRAY_SIZE(rtt_resources),
- };
- 
- static void __init at91_add_device_rtt(void)
- {
-+	device_init_wakeup(&at91sam9261_rtt_device.dev, 1);
- 	platform_device_register(&at91sam9261_rtt_device);
- }
- 
-@@ -938,7 +988,7 @@ static inline void configure_usart2_pins
- 		at91_set_B_periph(AT91_PIN_PA16, 0);	/* CTS2 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1019,8 +1069,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -1031,6 +1079,9 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1050,6 +1101,7 @@ static int __init at91_add_standard_devi
- {
- 	at91_add_device_rtt();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- a/arch/arm/mach-at91/at91sam9263.c
-+++ b/arch/arm/mach-at91/at91sam9263.c
-@@ -11,12 +11,14 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/pm.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9263.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- #include "clock.h"
-@@ -271,6 +273,11 @@ static void at91sam9263_reset(void)
- 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
- 
-+static void at91sam9263_poweroff(void)
-+{
-+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
- 
- /* --------------------------------------------------------------------
-  *  AT91SAM9263 processor initialization
-@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsig
- 	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
- 
- 	at91_arch_reset = at91sam9263_reset;
-+	pm_power_off = at91sam9263_poweroff;
- 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
- 
- 	/* Init clock subsystem */
---- a/arch/arm/mach-at91/at91sam9263_devices.c
-+++ b/arch/arm/mach-at91/at91sam9263_devices.c
-@@ -22,8 +22,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9263.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91sam9263_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
-@@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mm
- 		}
- 
- 		mmc0_data = *data;
--		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
-+		at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
- 		platform_device_register(&at91sam9263_mmc0_device);
- 	} else {			/* MCI1 */
- 		/* CLK */
-@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE	AT91_CHIPSELECT_3
- 
- static struct resource nand_resources[] = {
--	{
-+	[0] = {
- 		.start	= NAND_BASE,
- 		.end	= NAND_BASE + SZ_256M - 1,
- 		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91_BASE_SYS + AT91_ECC0,
-+		.end	= AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
-+		.flags	= IORESOURCE_MEM,
- 	}
- };
- 
-@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {}
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9263_BASE_TCB0,
-+		.end	= AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9263_ID_TCB,
-+		.end	= AT91SAM9263_ID_TCB,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9263_tcb_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb_resources,
-+	.num_resources	= ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has one clock and irq for all three TC channels */
-+	at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
-+	platform_device_register(&at91sam9263_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTT
-  * -------------------------------------------------------------------- */
- 
-@@ -818,7 +860,9 @@ static struct platform_device at91sam926
- 
- static void __init at91_add_device_rtt(void)
- {
-+	device_init_wakeup(&at91sam9263_rtt0_device.dev, 1);
- 	platform_device_register(&at91sam9263_rtt0_device);
-+	device_init_wakeup(&at91sam9263_rtt1_device.dev, 1);
- 	platform_device_register(&at91sam9263_rtt1_device);
- }
- 
-@@ -933,9 +977,6 @@ static inline void configure_ssc1_pins(u
- }
- 
- /*
-- * Return the device node so that board init code can use it as the
-- * parent for the device node reflecting how it's used on this board.
-- *
-  * SSC controllers are accessed through library code, instead of any
-  * kind of all-singing/all-dancing driver.  For example one could be
-  * used by a particular I2S audio codec's driver, while another one
-@@ -1146,7 +1187,7 @@ static inline void configure_usart2_pins
- 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1227,8 +1268,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -1239,9 +1278,12 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
- void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
-@@ -1257,6 +1299,7 @@ static int __init at91_add_standard_devi
- {
- 	at91_add_device_rtt();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- a/arch/arm/mach-at91/at91sam926x_time.c
-+++ b/arch/arm/mach-at91/at91sam926x_time.c
-@@ -1,23 +1,20 @@
- /*
-- * linux/arch/arm/mach-at91/at91sam926x_time.c
-+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
-  *
-  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
-  * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
-+ * Converted to ClockSource/ClockEvents by David Brownell.
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-  */
--
--#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/kernel.h>
--#include <linux/sched.h>
--#include <linux/time.h>
-+#include <linux/clk.h>
-+#include <linux/clockchips.h>
- 
--#include <asm/hardware.h>
--#include <asm/io.h>
- #include <asm/mach/time.h>
- 
- #include <asm/arch/at91_pit.h>
-@@ -26,85 +23,167 @@
- #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
- #define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
- 
-+static u32 pit_cycle;		/* write-once */
-+static u32 pit_cnt;		/* access only w/system irq blocked */
-+
-+
- /*
-- * Returns number of microseconds since last timer interrupt.  Note that interrupts
-- * will have been disabled by do_gettimeofday()
-- *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
-+ * Clocksource:  just a monotonic counter of MCK/16 cycles.
-+ * We don't care whether or not PIT irqs are enabled.
-  */
--static unsigned long at91sam926x_gettimeoffset(void)
-+static cycle_t read_pit_clk(void)
- {
--	unsigned long elapsed;
--	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
-+	unsigned long flags;
-+	u32 elapsed;
-+	u32 t;
-+
-+	raw_local_irq_save(flags);
-+	elapsed = pit_cnt;
-+	t = at91_sys_read(AT91_PIT_PIIR);
-+	raw_local_irq_restore(flags);
-+
-+	elapsed += PIT_PICNT(t) * pit_cycle;
-+	elapsed += PIT_CPIV(t);
-+	return elapsed;
-+}
-+
-+static struct clocksource pit_clk = {
-+	.name		= "pit",
-+	.rating		= 175,
-+	.read		= read_pit_clk,
-+	.shift		= 20,
-+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
- 
--	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
-+/*
-+ * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
-+ */
-+static void
-+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-+{
-+	unsigned long	flags;
- 
--	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
-+	switch (mode) {
-+	case CLOCK_EVT_MODE_PERIODIC:
-+		/* update clocksource counter, then enable the IRQ */
-+		raw_local_irq_save(flags);
-+		pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-+		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
-+				| AT91_PIT_PITIEN);
-+		raw_local_irq_restore(flags);
-+		break;
-+	case CLOCK_EVT_MODE_ONESHOT:
-+		BUG();
-+		/* FALLTHROUGH */
-+	case CLOCK_EVT_MODE_SHUTDOWN:
-+	case CLOCK_EVT_MODE_UNUSED:
-+		/* disable irq, leaving the clocksource active */
-+		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-+		break;
-+	case CLOCK_EVT_MODE_RESUME:
-+		break;
-+	}
- }
- 
-+static struct clock_event_device pit_clkevt = {
-+	.name		= "pit",
-+	.features	= CLOCK_EVT_FEAT_PERIODIC,
-+	.shift		= 32,
-+	.rating		= 100,
-+	.cpumask	= CPU_MASK_CPU0,
-+	.set_mode	= pit_clkevt_mode,
-+};
-+
-+
- /*
-  * IRQ handler for the timer.
-  */
--static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
-+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
- {
--	volatile long nr_ticks;
- 
--	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
--		/* Get number to ticks performed before interrupt and clear PIT interrupt */
-+	/* The PIT interrupt may be disabled, and is shared */
-+	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-+			&& (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
-+		unsigned nr_ticks;
-+
-+		/* Get number of ticks performed before irq, and ack it */
- 		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
- 		do {
--			timer_tick();
-+			pit_cnt += pit_cycle;
-+			pit_clkevt.event_handler(&pit_clkevt);
- 			nr_ticks--;
- 		} while (nr_ticks);
- 
- 		return IRQ_HANDLED;
--	} else
--		return IRQ_NONE;		/* not handled */
-+	}
-+
-+	return IRQ_NONE;
- }
- 
--static struct irqaction at91sam926x_timer_irq = {
-+static struct irqaction at91sam926x_pit_irq = {
- 	.name		= "at91_tick",
- 	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
--	.handler	= at91sam926x_timer_interrupt
-+	.handler	= at91sam926x_pit_interrupt
- };
- 
--void at91sam926x_timer_reset(void)
-+static void at91sam926x_pit_reset(void)
- {
--	/* Disable timer */
-+	/* Disable timer and irqs */
- 	at91_sys_write(AT91_PIT_MR, 0);
- 
--	/* Clear any pending interrupts */
--	(void) at91_sys_read(AT91_PIT_PIVR);
-+	/* Clear any pending interrupts, wait for PIT to stop counting */
-+	while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
-+		cpu_relax();
- 
--	/* Set Period Interval timer and enable its interrupt */
--	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
-+	/* Start PIT but don't enable IRQ */
-+	at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
- }
- 
- /*
-- * Set up timer interrupt.
-+ * Set up both clocksource and clockevent support.
-  */
--void __init at91sam926x_timer_init(void)
-+static void __init at91sam926x_pit_init(void)
- {
-+	unsigned long	pit_rate;
-+	unsigned	bits;
-+
-+	/*
-+	 * Use our actual MCK to figure out how many MCK/16 ticks per
-+	 * 1/HZ period (instead of a compile-time constant LATCH).
-+	 */
-+	pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
-+	pit_cycle = (pit_rate + HZ/2) / HZ;
-+	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
-+
- 	/* Initialize and enable the timer */
--	at91sam926x_timer_reset();
-+	at91sam926x_pit_reset();
- 
--	/* Make IRQs happen for the system timer. */
--	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
-+	/*
-+	 * Register clocksource.  The high order bits of PIV are unused,
-+	 * so this isn't a 32-bit counter unless we get clockevent irqs.
-+	 */
-+	pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
-+	bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
-+	pit_clk.mask = CLOCKSOURCE_MASK(bits);
-+	clocksource_register(&pit_clk);
-+
-+	/* Set up irq handler */
-+	setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
-+
-+	/* Set up and register clockevents */
-+	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
-+	clockevents_register_device(&pit_clkevt);
- }
- 
--#ifdef CONFIG_PM
--static void at91sam926x_timer_suspend(void)
-+static void at91sam926x_pit_suspend(void)
- {
- 	/* Disable timer */
- 	at91_sys_write(AT91_PIT_MR, 0);
- }
--#else
--#define at91sam926x_timer_suspend	NULL
--#endif
- 
- struct sys_timer at91sam926x_timer = {
--	.init		= at91sam926x_timer_init,
--	.offset		= at91sam926x_gettimeoffset,
--	.suspend	= at91sam926x_timer_suspend,
--	.resume		= at91sam926x_timer_reset,
-+	.init		= at91sam926x_pit_init,
-+	.suspend	= at91sam926x_pit_suspend,
-+	.resume		= at91sam926x_pit_reset,
- };
--
---- a/arch/arm/mach-at91/at91sam9rl.c
-+++ b/arch/arm/mach-at91/at91sam9rl.c
-@@ -10,6 +10,7 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/pm.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -17,6 +18,7 @@
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- #include "clock.h"
-@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void)
- 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
- 
-+static void at91sam9rl_poweroff(void)
-+{
-+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
- 
- /* --------------------------------------------------------------------
-  *  AT91SAM9RL processor initialization
-@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsign
- 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
- 
- 	at91_arch_reset = at91sam9rl_reset;
-+	pm_power_off = at91sam9rl_poweroff;
- 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
- 
- 	/* Init clock subsystem */
---- a/arch/arm/mach-at91/at91sam9rl_devices.c
-+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
-@@ -20,12 +20,107 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91sam9rl_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
- 
- /* --------------------------------------------------------------------
-+ *  USB HS Device (Gadget)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-+
-+static struct resource usba_udc_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_UDPHS_FIFO,
-+		.end	= AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_BASE_UDPHS,
-+		.end	= AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[2] = {
-+		.start	= AT91SAM9RL_ID_UDPHS,
-+		.end	= AT91SAM9RL_ID_UDPHS,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-+	[idx] = {						\
-+		.name		= nam,				\
-+		.index		= idx,				\
-+		.fifo_size	= maxpkt,			\
-+		.nr_banks	= maxbk,			\
-+		.can_dma	= dma,				\
-+		.can_isoc	= isoc,				\
-+	}
-+
-+static struct usba_ep_data usba_udc_ep[] __initdata = {
-+	EP("ep0", 0, 64, 1, 0, 0),
-+	EP("ep1", 1, 1024, 2, 1, 1),
-+	EP("ep2", 2, 1024, 2, 1, 1),
-+	EP("ep3", 3, 1024, 3, 1, 0),
-+	EP("ep4", 4, 1024, 3, 1, 0),
-+	EP("ep5", 5, 1024, 3, 1, 1),
-+	EP("ep6", 6, 1024, 3, 1, 1),
-+};
-+
-+#undef EP
-+
-+/*
-+ * pdata doesn't have room for any endpoints, so we need to
-+ * append room for the ones we need right after it.
-+ */
-+static struct {
-+	struct usba_platform_data pdata;
-+	struct usba_ep_data ep[7];
-+} usba_udc_data;
-+
-+static struct platform_device at91_usba_udc_device = {
-+	.name		= "atmel_usba_udc",
-+	.id		= -1,
-+	.dev		= {
-+				.platform_data	= &usba_udc_data.pdata,
-+	},
-+	.resource	= usba_udc_resources,
-+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-+};
-+
-+void __init at91_add_device_usba(struct usba_platform_data *data)
-+{
-+	/*
-+	 * Invalid pins are 0 on AT91, but the usba driver is shared
-+	 * with AVR32, which use negative values instead. Once/if
-+	 * gpio_is_valid() is ported to AT91, revisit this code.
-+	 */
-+	usba_udc_data.pdata.vbus_pin = -EINVAL;
-+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-+
-+	if (data && data->vbus_pin > 0) {
-+		at91_set_gpio_input(data->vbus_pin, 0);
-+		at91_set_deglitch(data->vbus_pin, 1);
-+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-+	}
-+
-+	/* Pullup pin is handled internally by USB device peripheral */
-+
-+	/* Clocks */
-+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-+
-+	platform_device_register(&at91_usba_udc_device);
-+}
-+#else
-+void __init at91_add_device_usba(struct usba_platform_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  MMC / SD
-  * -------------------------------------------------------------------- */
- 
-@@ -105,10 +200,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE	AT91_CHIPSELECT_3
- 
- static struct resource nand_resources[] = {
--	{
-+	[0] = {
- 		.start	= NAND_BASE,
- 		.end	= NAND_BASE + SZ_256M - 1,
- 		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91_BASE_SYS + AT91_ECC,
-+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+		.flags	= IORESOURCE_MEM,
- 	}
- };
- 
-@@ -385,6 +485,100 @@ void __init at91_add_device_lcdc(struct 
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_TCB0,
-+		.end	= AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_TC0,
-+		.end	= AT91SAM9RL_ID_TC0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start	= AT91SAM9RL_ID_TC1,
-+		.end	= AT91SAM9RL_ID_TC1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	[3] = {
-+		.start	= AT91SAM9RL_ID_TC2,
-+		.end	= AT91SAM9RL_ID_TC2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9rl_tcb_device = {
-+	.name		= "atmel_tcb",
-+	.id		= 0,
-+	.resource	= tcb_resources,
-+	.num_resources	= ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+	/* this chip has a separate clock and irq for each TC channel */
-+	at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
-+	at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
-+	at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
-+	platform_device_register(&at91sam9rl_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  Touchscreen
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource tsadcc_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_TSC,
-+		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_TSC,
-+		.end	= AT91SAM9RL_ID_TSC,
-+		.flags	= IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct platform_device at91_tsadcc_device = {
-+	.name		= "atmel_tsadcc",
-+	.id		= -1,
-+	.dev		= {
-+				.dma_mask		= &tsadcc_dmamask,
-+				.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	},
-+	.resource	= tsadcc_resources,
-+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
-+};
-+
-+void __init at91_add_device_tsadcc(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
-+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
-+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
-+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
-+
-+	platform_device_register(&at91_tsadcc_device);
-+}
-+#else
-+void __init at91_add_device_tsadcc(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  RTC
-  * -------------------------------------------------------------------- */
- 
-@@ -397,6 +591,7 @@ static struct platform_device at91sam9rl
- 
- static void __init at91_add_device_rtc(void)
- {
-+	device_init_wakeup(&at91sam9rl_rtc_device.dev, 1);
- 	platform_device_register(&at91sam9rl_rtc_device);
- }
- #else
-@@ -418,13 +613,14 @@ static struct resource rtt_resources[] =
- 
- static struct platform_device at91sam9rl_rtt_device = {
- 	.name		= "at91_rtt",
--	.id		= -1,
-+	.id		= 0,
- 	.resource	= rtt_resources,
- 	.num_resources	= ARRAY_SIZE(rtt_resources),
- };
- 
- static void __init at91_add_device_rtt(void)
- {
-+	device_init_wakeup(&at91sam9rl_rtt_device.dev, 1);
- 	platform_device_register(&at91sam9rl_rtt_device);
- }
- 
-@@ -539,9 +735,6 @@ static inline void configure_ssc1_pins(u
- }
- 
- /*
-- * Return the device node so that board init code can use it as the
-- * parent for the device node reflecting how it's used on this board.
-- *
-  * SSC controllers are accessed through library code, instead of any
-  * kind of all-singing/all-dancing driver.  For example one could be
-  * used by a particular I2S audio codec's driver, while another one
-@@ -802,7 +995,7 @@ static inline void configure_usart3_pins
- 		at91_set_B_periph(AT91_PIN_PD3, 0);	/* CTS3 */
- }
- 
--static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
- struct platform_device *atmel_default_console_device;	/* the serial console device */
- 
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -893,8 +1086,6 @@ void __init at91_set_serial_console(unsi
- {
- 	if (portnr < ATMEL_MAX_UART)
- 		atmel_default_console_device = at91_uarts[portnr];
--	if (!atmel_default_console_device)
--		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- 
- void __init at91_add_device_serial(void)
-@@ -905,6 +1096,9 @@ void __init at91_add_device_serial(void)
- 		if (at91_uarts[i])
- 			platform_device_register(at91_uarts[i]);
- 	}
-+
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -925,6 +1119,7 @@ static int __init at91_add_standard_devi
- 	at91_add_device_rtc();
- 	at91_add_device_rtt();
- 	at91_add_device_watchdog();
-+	at91_add_device_tc();
- 	return 0;
- }
- 
---- /dev/null
-+++ b/arch/arm/mach-at91/board-cam60.c
-@@ -0,0 +1,180 @@
-+/*
-+ * KwikByte CAM60 (KB9260)
-+ *
-+ * based on board-sam9260ek.c
-+ *   Copyright (C) 2005 SAN People
-+ *   Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init cam60_map_io(void)
-+{
-+	/* Initialize processor: 10 MHz crystal */
-+	at91sam9260_initialize(10000000);
-+
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+	at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host
-+ */
-+static struct at91_usbh_data __initdata cam60_usbh_data = {
-+	.ports		= 1,
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+	{
-+		.name	= "BOOT1",
-+		.offset	= 0,
-+		.size	= 4 * 1056,
-+	},
-+	{
-+		.name	= "BOOT2",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 256 * 1056,
-+	},
-+	{
-+		.name	= "kernel",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 2222 * 1056,
-+	},
-+	{
-+		.name	= "file system",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+	.name		= "spi_flash",
-+	.parts		= cam60_spi_partitions,
-+	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+		.platform_data	= &cam60_spi_flash_platform_data
-+	},
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PB5,
-+	.is_rmii	= 0,
-+};
-+
-+
-+/*
-+ * NAND Flash
-+ */
-+static struct mtd_partition __initdata cam60_nand_partition[] = {
-+	{
-+		.name	= "nand_fs",
-+		.offset	= 0,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(cam60_nand_partition);
-+	return cam60_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata cam60_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+	// .det_pin	= ... not there
-+	.rdy_pin	= AT91_PIN_PA9,
-+	.enable_pin	= AT91_PIN_PA7,
-+	.partition_info	= nand_partitions,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* SPI */
-+	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+	/* Ethernet */
-+	at91_add_device_eth(&cam60_macb_data);
-+	/* USB Host */
-+	/* enable USB power supply circuit */
-+	at91_set_gpio_output(AT91_PIN_PB18, 1);
-+	at91_add_device_usbh(&cam60_usbh_data);
-+	/* NAND */
-+	at91_add_device_nand(&cam60_nand_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+	/* Maintainer: KwikByte */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= cam60_map_io,
-+	.init_irq	= cam60_init_irq,
-+	.init_machine	= cam60_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-cap9adk.c
-+++ b/arch/arm/mach-at91/board-cap9adk.c
-@@ -36,16 +36,14 @@
- #include <asm/hardware.h>
- #include <asm/setup.h>
- #include <asm/mach-types.h>
--#include <asm/irq.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
--#include <asm/mach/irq.h>
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91cap9_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
- 
- #include "generic.h"
- 
-@@ -78,6 +76,12 @@ static struct at91_usbh_data __initdata 
- 	.ports		= 2,
- };
- 
-+/*
-+ * USB HS Device port
-+ */
-+static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
-+	.vbus_pin	= AT91_PIN_PB31,
-+};
- 
- /*
-  * ADS7846 Touchscreen
-@@ -130,7 +134,7 @@ static struct spi_board_info cap9adk_spi
- 	{
- 		.modalias	= "ads7846",
- 		.chip_select	= 3,		/* can be 2 or 3, depending on J2 jumper */
--		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-+		.max_speed_hz	= 125000 * 16,	/* max sample rate * clocks per sample */
- 		.bus_num	= 0,
- 		.platform_data	= &ads_info,
- 		.irq		= AT91_PIN_PC4,
-@@ -324,8 +328,9 @@ static void __init cap9adk_board_init(vo
- 	/* Serial */
- 	at91_add_device_serial();
- 	/* USB Host */
--	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
- 	at91_add_device_usbh(&cap9adk_usbh_data);
-+	/* USB HS */
-+	at91_add_device_usba(&cap9adk_usba_udc_data);
- 	/* SPI */
- 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
- 	/* Touchscreen */
-@@ -341,7 +346,6 @@ static void __init cap9adk_board_init(vo
- 	/* I2C */
- 	at91_add_device_i2c(NULL, 0);
- 	/* LCD Controller */
--	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
- 	at91_add_device_lcdc(&cap9adk_lcdc_data);
- 	/* AC97 */
- 	at91_add_device_ac97(&cap9adk_ac97_data);
---- a/arch/arm/mach-at91/board-carmeva.c
-+++ b/arch/arm/mach-at91/board-carmeva.c
-@@ -40,24 +40,21 @@
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata carmeva_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init carmeva_map_io(void)
- {
- 	/* Initialize processor: 20.000 MHz crystal */
- 	at91rm9200_initialize(20000000, AT91RM9200_BGA);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&carmeva_uart_config);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init carmeva_init_irq(void)
-@@ -117,6 +114,30 @@ static struct spi_board_info carmeva_spi
- 	},
- };
- 
-+static struct gpio_led carmeva_leds[] = {
-+	{ /* "user led 1", LED9 */
-+		.name			= "led9",
-+		.gpio			= AT91_PIN_PA21,
-+		.active_low		= 1,
-+		.default_trigger	= "heartbeat",
-+	},
-+	{ /* "user led 2", LED10 */
-+		.name			= "led10",
-+		.gpio			= AT91_PIN_PA25,
-+		.active_low		= 1,
-+	},
-+	{ /* "user led 3", LED11 */
-+		.name			= "led11",
-+		.gpio			= AT91_PIN_PA26,
-+		.active_low		= 1,
-+	},
-+	{ /* "user led 4", LED12 */
-+		.name			= "led12",
-+		.gpio			= AT91_PIN_PA18,
-+		.active_low		= 1,
-+	}
-+};
-+
- static void __init carmeva_board_init(void)
- {
- 	/* Serial */
-@@ -135,6 +156,8 @@ static void __init carmeva_board_init(vo
- //	at91_add_device_cf(&carmeva_cf_data);
- 	/* MMC */
- 	at91_add_device_mmc(0, &carmeva_mmc_data);
-+	/* LEDs */
-+	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
- }
- 
- MACHINE_START(CARMEVA, "Carmeva")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-chub.c
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ *  Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ *  by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 5,
-+	.tty_map	= { 4, 0, 1, 2, 3 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+	/* Initialize clocks: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PB29,
-+	.is_rmii	= 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+	{
-+		.name	= "NAND Partition 1",
-+		.offset = 0,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(chub_nand_partition);
-+	return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+	.ale		= 22,
-+	.cle		= 21,
-+	.enable_pin	= AT91_PIN_PA27,
-+	.partition_info	= nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+	/* Ethernet */
-+	at91_add_device_eth(&chub_eth_data);
-+	/* SPI */
-+	at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+	/* NAND Flash */
-+	at91_add_device_nand(&chub_nand_data);
-+	/* Disable write protect for NAND */
-+	at91_set_gpio_output(AT91_PIN_PB7, 1);
-+	/* Power enable for 3x RS-232 and 1x RS-485 */
-+	at91_set_gpio_output(AT91_PIN_PB9, 1);
-+	/* Disable write protect for FRAM */
-+	at91_set_gpio_output(AT91_PIN_PA21, 1);
-+	/* Disable write protect for Dataflash */
-+	at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+	/* Maintainer: Ivan Kuten AT Promwad DOT com */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= chub_map_io,
-+	.init_irq	= chub_init_irq,
-+	.init_machine	= chub_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-csb337.c
-+++ b/arch/arm/mach-at91/board-csb337.c
-@@ -61,6 +61,7 @@ static void __init csb337_map_io(void)
- 
- 	/* Setup the LEDs */
- 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+	at91_set_gpio_output(AT91_PIN_PB2, 1);		/* third (unused) LED */
- 
- 	/* Setup the serial ports and console */
- 	at91_init_serial(&csb337_uart_config);
-@@ -202,11 +203,11 @@ static struct platform_device csb300_but
- 
- static void __init csb300_add_device_buttons(void)
- {
--	at91_set_gpio_input(AT91_PIN_PB29, 0);	/* sw0 */
-+	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
- 	at91_set_deglitch(AT91_PIN_PB29, 1);
--	at91_set_gpio_input(AT91_PIN_PB28, 0);	/* sw1 */
-+	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
- 	at91_set_deglitch(AT91_PIN_PB28, 1);
--	at91_set_gpio_input(AT91_PIN_PA21, 0);	/* sw2 */
-+	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
- 	at91_set_deglitch(AT91_PIN_PA21, 1);
- 
- 	platform_device_register(&csb300_button_device);
-@@ -233,7 +234,7 @@ static struct gpio_led csb_leds[] = {
- 		.gpio			= AT91_PIN_PB0,
- 		.active_low		= 1,
- 		.default_trigger	= "ide-disk",
--	},
-+	}
- };
- 
- 
---- a/arch/arm/mach-at91/board-csb637.c
-+++ b/arch/arm/mach-at91/board-csb637.c
-@@ -40,27 +40,16 @@
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata csb637_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init csb637_map_io(void)
- {
- 	/* Initialize processor: 3.6864 MHz crystal */
- 	at91rm9200_initialize(3686400, AT91RM9200_BGA);
- 
--	/* Setup the LEDs */
--	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&csb637_uart_config);
-+	/* make console=ttyS0 (ie, DBGU) the default */
-+	at91_set_serial_console(0);
- }
- 
- static void __init csb637_init_irq(void)
-@@ -118,8 +107,19 @@ static struct platform_device csb_flash 
- 	.num_resources	= ARRAY_SIZE(csb_flash_resources),
- };
- 
-+static struct gpio_led csb_leds[] = {
-+	{	/* "d1", red */
-+		.name			= "d1",
-+		.gpio			= AT91_PIN_PB2,
-+		.active_low		= 1,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
- static void __init csb637_board_init(void)
- {
-+	/* LED(s) */
-+	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- 	/* Serial */
- 	at91_add_device_serial();
- 	/* Ethernet */
---- a/arch/arm/mach-at91/board-dk.c
-+++ b/arch/arm/mach-at91/board-dk.c
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -45,17 +46,6 @@
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata dk_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init dk_map_io(void)
- {
- 	/* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@ static void __init dk_map_io(void)
- 	/* Setup the LEDs */
- 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&dk_uart_config);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init dk_init_irq(void)
-@@ -73,6 +71,185 @@ static void __init dk_init_irq(void)
- 	at91rm9200_init_interrupts(NULL);
- }
- 
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE	0x30000000L
-+#define AT91_FB_REG_SIZE	0x200
-+#define AT91_FB_VMEM_BASE	0x30200000L
-+#define AT91_FB_VMEM_SIZE	0x140000L
-+
-+static void dk_init_video(void)
-+{
-+	/* NWAIT Signal */
-+	at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+	/* Initialization of the Static Memory Controller for Chip Select 2 */
-+	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16			/* 16 bit */
-+				| AT91_SMC_WSEN | AT91_SMC_NWS_(4)	/* wait states */
-+				| AT91_SMC_TDF_(1)			/* float time */
-+	);
-+
-+	at91_ics1523_init();
-+}
-+
-+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
-+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
-+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
-+	{S1DREG_GPIO_CNF0,		0x00},
-+	{S1DREG_GPIO_CNF1,		0x00},
-+	{S1DREG_GPIO_CTL0,		0x08},
-+	{S1DREG_GPIO_CTL1,		0x00},
-+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
-+	{S1DREG_LCD_CLK_CNF,		0x00},
-+	{S1DREG_CRT_CLK_CNF,		0x00},
-+	{S1DREG_MPLUG_CLK_CNF,		0x00},
-+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
-+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
-+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
-+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
-+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
-+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
-+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
-+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
-+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
-+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
-+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
-+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
-+	{S1DREG_LCD_DISP_START0,	0x00},
-+	{S1DREG_LCD_DISP_START1,	0xC8},
-+	{S1DREG_LCD_DISP_START2,	0x00},
-+	{S1DREG_LCD_MEM_OFF0,		0x80},
-+	{S1DREG_LCD_MEM_OFF1,		0x02},
-+	{S1DREG_LCD_PIX_PAN,		0x00},
-+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
-+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
-+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
-+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
-+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_TV_OUT_CTL,		0x10},
-+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
-+	{S1DREG_CRT_DISP_START0,	0x00},
-+	{S1DREG_CRT_DISP_START1,	0x00},
-+	{S1DREG_CRT_DISP_START2,	0x00},
-+	{S1DREG_CRT_MEM_OFF0,		0x80},
-+	{S1DREG_CRT_MEM_OFF1,		0x02},
-+	{S1DREG_CRT_PIX_PAN,		0x00},
-+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_LCD_CUR_START,		0x01},
-+	{S1DREG_LCD_CUR_XPOS0,		0x00},
-+	{S1DREG_LCD_CUR_XPOS1,		0x00},
-+	{S1DREG_LCD_CUR_YPOS0,		0x00},
-+	{S1DREG_LCD_CUR_YPOS1,		0x00},
-+	{S1DREG_LCD_CUR_BCTL0,		0x00},
-+	{S1DREG_LCD_CUR_GCTL0,		0x00},
-+	{S1DREG_LCD_CUR_RCTL0,		0x00},
-+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
-+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_CRT_CUR_START,		0x01},
-+	{S1DREG_CRT_CUR_XPOS0,		0x00},
-+	{S1DREG_CRT_CUR_XPOS1,		0x00},
-+	{S1DREG_CRT_CUR_YPOS0,		0x00},
-+	{S1DREG_CRT_CUR_YPOS1,		0x00},
-+	{S1DREG_CRT_CUR_BCTL0,		0x00},
-+	{S1DREG_CRT_CUR_GCTL0,		0x00},
-+	{S1DREG_CRT_CUR_RCTL0,		0x00},
-+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
-+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CC_EXP,		0x00},
-+	{S1DREG_BBLT_OP,		0x00},
-+	{S1DREG_BBLT_SRC_START0,	0x00},
-+	{S1DREG_BBLT_SRC_START1,	0x00},
-+	{S1DREG_BBLT_SRC_START2,	0x00},
-+	{S1DREG_BBLT_DST_START0,	0x00},
-+	{S1DREG_BBLT_DST_START1,	0x00},
-+	{S1DREG_BBLT_DST_START2,	0x00},
-+	{S1DREG_BBLT_MEM_OFF0,		0x00},
-+	{S1DREG_BBLT_MEM_OFF1,		0x00},
-+	{S1DREG_BBLT_WIDTH0,		0x00},
-+	{S1DREG_BBLT_WIDTH1,		0x00},
-+	{S1DREG_BBLT_HEIGHT0,		0x00},
-+	{S1DREG_BBLT_HEIGHT1,		0x00},
-+	{S1DREG_BBLT_BGC0,		0x00},
-+	{S1DREG_BBLT_BGC1,		0x00},
-+	{S1DREG_BBLT_FGC0,		0x00},
-+	{S1DREG_BBLT_FGC1,		0x00},
-+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
-+	{S1DREG_LKUP_ADDR,		0x00},
-+	{S1DREG_PS_CNF,			0x00},	/* Power Save disable */
-+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
-+	{S1DREG_CPU2MEM_WDOGT,		0x00},
-+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+	.initregs		= dk_s1dfb_initregs,
-+	.initregssize		= ARRAY_SIZE(dk_s1dfb_initregs),
-+	.platform_init_video	= dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource dk_s1dfb_resource[] = {
-+	[0] = {	/* video mem */
-+		.name   = "s1d13806 memory",
-+		.start  = AT91_FB_VMEM_BASE,
-+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {	/* video registers */
-+		.name   = "s1d13806 registers",
-+		.start  = AT91_FB_REG_BASE,
-+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+	.name		= "s1d13806fb",
-+	.id		= -1,
-+	.dev		= {
-+			.dma_mask		= &s1dfb_dmamask,
-+			.coherent_dma_mask	= DMA_BIT_MASK(32),
-+			.platform_data		= &dk_s1dfb_pdata,
-+	},
-+	.resource	= dk_s1dfb_resource,
-+	.num_resources	= ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+	platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- 	.phy_irq_pin	= AT91_PIN_PC4,
- 	.is_rmii	= 1,
-@@ -164,7 +341,7 @@ static struct at91_nand_data __initdata 
- #define DK_FLASH_SIZE	0x200000
- 
- static struct physmap_flash_data dk_flash_data = {
--	.width	= 2,
-+	.width		= 2,
- };
- 
- static struct resource dk_flash_resource = {
-@@ -223,8 +400,12 @@ static void __init dk_board_init(void)
- 	platform_device_register(&dk_flash);
- 	/* LEDs */
- 	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-+	/* SSC (to LM4549 audio codec) */
-+	at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX);
-+	/* SSC (to SI3021 line interface) */
-+	at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF);
- 	/* VGA */
--//	dk_add_device_video();
-+	dk_add_device_video();
- }
- 
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
---- a/arch/arm/mach-at91/board-eb9200.c
-+++ b/arch/arm/mach-at91/board-eb9200.c
-@@ -40,24 +40,24 @@
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata eb9200_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init eb9200_map_io(void)
- {
- 	/* Initialize processor: 18.432 MHz crystal */
- 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&eb9200_uart_config);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			| ATMEL_UART_RI);
-+
-+	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
-+	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init eb9200_init_irq(void)
---- /dev/null
-+++ b/arch/arm/mach-at91/board-ecbat91.c
-@@ -0,0 +1,178 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
-+ * Copyright (C) 2007 emQbit.com.
-+ *
-+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ecb_at91map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-+
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx & Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init ecb_at91init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata ecb_at91eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PC4,
-+	.is_rmii	= 0,
-+};
-+
-+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
-+	.ports		= 1,
-+};
-+
-+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+};
-+
-+
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata my_flash0_partitions[] =
-+{
-+	{	/* 0x8400 */
-+		.name	= "Darrell-loader",
-+		.offset	= 0,
-+		.size	= 12* 1056,
-+	},
-+	{
-+		.name	= "U-boot",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 110 * 1056,
-+	},
-+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+		.name	= "Uoot-env",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 8 * 1056,
-+	},
-+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+		.name	= "Kernel",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 1534 * 1056,
-+	},
-+	{	/* 190200 - jffs2 root filesystem */
-+		.name	= "Filesystem",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= MTDPART_SIZ_FULL,	/* 26 sectors */
-+	}
-+};
-+
-+static struct flash_platform_data __initdata my_flash0_platform = {
-+	.name		= "Removable flash card",
-+	.parts		= my_flash0_partitions,
-+	.nr_parts	= ARRAY_SIZE(my_flash0_partitions)
-+};
-+
-+#endif
-+
-+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 10 * 1000 * 1000,
-+		.bus_num	= 0,
-+#if defined(CONFIG_MTD_DATAFLASH)
-+		.platform_data	= &my_flash0_platform,
-+#endif
-+	},
-+	{	/* User accessable spi - cs1 (250KHz) */
-+		.modalias	= "spi-cs1",
-+		.chip_select	= 1,
-+		.max_speed_hz	= 250 * 1000,
-+	},
-+	{	/* User accessable spi - cs2 (1MHz) */
-+		.modalias	= "spi-cs2",
-+		.chip_select	= 2,
-+		.max_speed_hz	= 1 * 1000 * 1000,
-+	},
-+	{	/* User accessable spi - cs3 (10MHz) */
-+		.modalias	= "spi-cs3",
-+		.chip_select	= 3,
-+		.max_speed_hz	= 10 * 1000 * 1000,
-+	},
-+};
-+
-+static void __init ecb_at91board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+
-+	/* Ethernet */
-+	at91_add_device_eth(&ecb_at91eth_data);
-+
-+	/* USB Host */
-+	at91_add_device_usbh(&ecb_at91usbh_data);
-+
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+
-+	/* MMC */
-+	at91_add_device_mmc(0, &ecb_at91mmc_data);
-+
-+	/* SPI */
-+	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-+}
-+
-+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
-+	/* Maintainer: emQbit.com */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= ecb_at91map_io,
-+	.init_irq	= ecb_at91init_irq,
-+	.init_machine	= ecb_at91board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-ek.c
-+++ b/arch/arm/mach-at91/board-ek.c
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -45,17 +46,6 @@
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init ek_map_io(void)
- {
- 	/* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@ static void __init ek_map_io(void)
- 	/* Setup the LEDs */
- 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&ek_uart_config);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init ek_init_irq(void)
-@@ -73,6 +71,187 @@ static void __init ek_init_irq(void)
- 	at91rm9200_init_interrupts(NULL);
- }
- 
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE	0x40000000L
-+#define	AT91_FB_REG_SIZE	0x200
-+#define AT91_FB_VMEM_BASE	0x40200000L
-+#define AT91_FB_VMEM_SIZE	0x140000L
-+
-+static void ek_init_video(void)
-+{
-+	/* NWAIT Signal */
-+	at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+	/* Initialization of the Static Memory Controller for Chip Select 3 */
-+	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16			/* 16 bit */
-+				| AT91_SMC_WSEN | AT91_SMC_NWS_(5)	/* wait states */
-+				| AT91_SMC_TDF_(1)			/* float time */
-+	);
-+
-+	at91_ics1523_init();
-+}
-+
-+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
-+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
-+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
-+	{S1DREG_GPIO_CNF0,		0xFF},	// 0x00
-+	{S1DREG_GPIO_CNF1,		0x1F},	// 0x08
-+	{S1DREG_GPIO_CTL0,		0x00},
-+	{S1DREG_GPIO_CTL1,		0x00},
-+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
-+	{S1DREG_LCD_CLK_CNF,		0x00},
-+	{S1DREG_CRT_CLK_CNF,		0x00},
-+	{S1DREG_MPLUG_CLK_CNF,		0x00},
-+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
-+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
-+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
-+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
-+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
-+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
-+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
-+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
-+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
-+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
-+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
-+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
-+	{S1DREG_LCD_DISP_START0,	0x00},
-+	{S1DREG_LCD_DISP_START1,	0xC8},
-+	{S1DREG_LCD_DISP_START2,	0x00},
-+	{S1DREG_LCD_MEM_OFF0,		0x80},
-+	{S1DREG_LCD_MEM_OFF1,		0x02},
-+	{S1DREG_LCD_PIX_PAN,		0x00},
-+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
-+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
-+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
-+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
-+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_TV_OUT_CTL,		0x10},
-+	{0x005E,			0x9F},
-+	{0x005F,			0x00},
-+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
-+	{S1DREG_CRT_DISP_START0,	0x00},
-+	{S1DREG_CRT_DISP_START1,	0x00},
-+	{S1DREG_CRT_DISP_START2,	0x00},
-+	{S1DREG_CRT_MEM_OFF0,		0x80},
-+	{S1DREG_CRT_MEM_OFF1,		0x02},
-+	{S1DREG_CRT_PIX_PAN,		0x00},
-+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_LCD_CUR_START,		0x01},
-+	{S1DREG_LCD_CUR_XPOS0,		0x00},
-+	{S1DREG_LCD_CUR_XPOS1,		0x00},
-+	{S1DREG_LCD_CUR_YPOS0,		0x00},
-+	{S1DREG_LCD_CUR_YPOS1,		0x00},
-+	{S1DREG_LCD_CUR_BCTL0,		0x00},
-+	{S1DREG_LCD_CUR_GCTL0,		0x00},
-+	{S1DREG_LCD_CUR_RCTL0,		0x00},
-+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
-+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_CRT_CUR_START,		0x01},
-+	{S1DREG_CRT_CUR_XPOS0,		0x00},
-+	{S1DREG_CRT_CUR_XPOS1,		0x00},
-+	{S1DREG_CRT_CUR_YPOS0,		0x00},
-+	{S1DREG_CRT_CUR_YPOS1,		0x00},
-+	{S1DREG_CRT_CUR_BCTL0,		0x00},
-+	{S1DREG_CRT_CUR_GCTL0,		0x00},
-+	{S1DREG_CRT_CUR_RCTL0,		0x00},
-+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
-+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CC_EXP,		0x00},
-+	{S1DREG_BBLT_OP,		0x00},
-+	{S1DREG_BBLT_SRC_START0,	0x00},
-+	{S1DREG_BBLT_SRC_START1,	0x00},
-+	{S1DREG_BBLT_SRC_START2,	0x00},
-+	{S1DREG_BBLT_DST_START0,	0x00},
-+	{S1DREG_BBLT_DST_START1,	0x00},
-+	{S1DREG_BBLT_DST_START2,	0x00},
-+	{S1DREG_BBLT_MEM_OFF0,		0x00},
-+	{S1DREG_BBLT_MEM_OFF1,		0x00},
-+	{S1DREG_BBLT_WIDTH0,		0x00},
-+	{S1DREG_BBLT_WIDTH1,		0x00},
-+	{S1DREG_BBLT_HEIGHT0,		0x00},
-+	{S1DREG_BBLT_HEIGHT1,		0x00},
-+	{S1DREG_BBLT_BGC0,		0x00},
-+	{S1DREG_BBLT_BGC1,		0x00},
-+	{S1DREG_BBLT_FGC0,		0x00},
-+	{S1DREG_BBLT_FGC1,		0x00},
-+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
-+	{S1DREG_LKUP_ADDR,		0x00},
-+	{S1DREG_PS_CNF,			0x10},	/* Power Save disable */
-+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
-+	{S1DREG_CPU2MEM_WDOGT,		0x00},
-+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+	.initregs		= ek_s1dfb_initregs,
-+	.initregssize		= ARRAY_SIZE(ek_s1dfb_initregs),
-+	.platform_init_video	= ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ek_s1dfb_resource[] = {
-+	[0] = {	/* video mem */
-+		.name   = "s1d13806 memory",
-+		.start  = AT91_FB_VMEM_BASE,
-+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {	/* video registers */
-+		.name   = "s1d13806 registers",
-+		.start  = AT91_FB_REG_BASE,
-+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+	.name		= "s1d13806fb",
-+	.id		= -1,
-+	.dev		= {
-+			.dma_mask		= &s1dfb_dmamask,
-+			.coherent_dma_mask	= DMA_BIT_MASK(32),
-+			.platform_data		= &ek_s1dfb_pdata,
-+	},
-+	.resource	= ek_s1dfb_resource,
-+	.num_resources	= ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+	platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- 	.phy_irq_pin	= AT91_PIN_PC4,
- 	.is_rmii	= 1,
-@@ -122,7 +301,7 @@ static struct i2c_board_info __initdata 
- #define EK_FLASH_SIZE	0x200000
- 
- static struct physmap_flash_data ek_flash_data = {
--	.width	= 2,
-+	.width		= 2,
- };
- 
- static struct resource ek_flash_resource = {
-@@ -189,7 +368,7 @@ static void __init ek_board_init(void)
- 	/* LEDs */
- 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- 	/* VGA */
--//	ek_add_device_video();
-+	ek_add_device_video();
- }
- 
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-homematic.c
-@@ -0,0 +1,163 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-homematic.c
-+ *
-+ *  Copyright (C) 2007 eQ-3 Entwicklung GmbH
-+ *
-+ *  based on work
-+ *	Copyright (C) 2005 SAN People
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata homematic_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 2,
-+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init homematic_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&homematic_uart_config);
-+}
-+
-+static void __init homematic_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata homematic_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PC4,
-+	.is_rmii	= 0,
-+};
-+
-+static struct at91_usbh_data __initdata homematic_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+static struct at91_udc_data __initdata homematic_udc_data = {
-+	.vbus_pin	= AT91_PIN_PD4,
-+	.pullup_pin	= AT91_PIN_PD5,
-+};
-+
-+static struct at91_mmc_data __initdata homematic_mmc_data = {
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+};
-+
-+static struct spi_board_info homematic_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+};
-+
-+static struct mtd_partition __initdata homematic_nand_partition[] = {
-+	{
-+		.name	= "root",
-+		.offset	= 0,
-+		.size   = 0x02000000,
-+	}, {
-+		.name	= "storage",
-+		.offset	= 0x02000000,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(homematic_nand_partition);
-+	return homematic_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata homematic_nand_data = {
-+	.ale		= 22,
-+	.cle		= 21,
-+//	.det_pin	= AT91_PIN_PB1,
-+	.rdy_pin	= AT91_PIN_PC2,
-+	.enable_pin	= AT91_PIN_PC0,
-+	.partition_info	= nand_partitions,
-+};
-+
-+static void __init homematic_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* Ethernet */
-+	at91_add_device_eth(&homematic_eth_data);
-+	/* USB Host */
-+	at91_add_device_usbh(&homematic_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&homematic_udc_data);
-+	at91_set_multi_drive(homematic_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+	/* SPI */
-+	at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	/* DataFlash card */
-+	at91_set_gpio_output(AT91_PIN_PB7, 0);
-+#else
-+	/* MMC */
-+	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-+	at91_add_device_mmc(0, &homematic_mmc_data);
-+#endif
-+	/* NAND */
-+	at91_add_device_nand(&homematic_nand_data);
-+}
-+
-+MACHINE_START(HOMEMATIC, "HomeMatic")
-+	/* Maintainer: eQ-3 */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= homematic_map_io,
-+	.init_irq	= homematic_init_irq,
-+	.init_machine	= homematic_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-kb9202.c
-+++ b/arch/arm/mach-at91/board-kb9202.c
-@@ -37,19 +37,10 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- 
--#include "generic.h"
-+#include <asm/arch/at91rm9200_mc.h>
- 
-+#include "generic.h"
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata kb9202_uart_config = {
--	.console_tty	= 0,					/* ttyS0 */
--	.nr_tty		= 3,
--	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
--};
- 
- static void __init kb9202_map_io(void)
- {
-@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
- 	/* Set up the LEDs */
- 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&kb9202_uart_config);
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1 (Rx & Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-+	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-+	
-+	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init kb9202_init_irq(void)
-@@ -111,6 +114,48 @@ static struct at91_nand_data __initdata 
- 	.partition_info	= nand_partitions,
- };
- 
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "The Reset pin must be passed via platform_data, not this way"
-+static struct resource kb9202_lcd_resources[] = {
-+	[0] = {
-+		.start	= AT91_CHIPSELECT_2,
-+		.end	= AT91_CHIPSELECT_2 + 0x200FF,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	[1] = {	/* reset pin */
-+		.start	= AT91_PIN_PC22,
-+		.end	= AT91_PIN_PC22,
-+		.flags	= IORESOURCE_MEM
-+	},
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+	.name		= "s1d15605fb",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(kb9202_lcd_resources),
-+	.resource	= kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ 	/* In case the boot loader did not set the chip select mode and timing */
-+	at91_sys_write(AT91_SMC_CSR(2),
-+		AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+		AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+	/* Backlight pin = output, off */
-+	at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+	/* Reset pin = output, in reset */
-+	at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+	platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- 	/* Serial */
-@@ -129,6 +174,8 @@ static void __init kb9202_board_init(voi
- 	at91_add_device_spi(NULL, 0);
- 	/* NAND */
- 	at91_add_device_nand(&kb9202_nand_data);
-+	/* LCD */
-+	kb9202_add_device_lcd();
- }
- 
- MACHINE_START(KB9200, "KB920x")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-qil-a9260.c
-@@ -0,0 +1,255 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-qil-a9260.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2006 Atmel
-+ *  Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/clk.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+	/* Initialize processor: 12.000 MHz crystal */
-+	at91sam9260_initialize(12000000);
-+
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS1 (ie, USART0) */
-+	at91_set_serial_console(1);
-+
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+	at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+	.vbus_pin	= AT91_PIN_PC5,
-+	.pullup_pin	= 0,		/* pull-up driven by UDC */
-+};
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if defined(CONFIG_RTC_DRV_M41T94)
-+	{	/* M41T94 RTC */
-+		.modalias	= "m41t94",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 1 * 1000 * 1000,
-+		.bus_num	= 0,
-+	}
-+#endif
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PA31,
-+	.is_rmii	= 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+	{
-+		.name	= "Uboot & Kernel",
-+		.offset	= 0x00000000,
-+		.size	= 16 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "Root FS",
-+		.offset	= 0x01000000,
-+		.size	= 120 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "FS",
-+		.offset	= 0x08800000,
-+		.size	= 120 * 1024 * 1024,
-+	},
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-+	return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+//	.det_pin	= ... not connected
-+	.rdy_pin	= AT91_PIN_PC13,
-+	.enable_pin	= AT91_PIN_PC14,
-+	.partition_info	= nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+	.bus_width_16	= 1,
-+#else
-+	.bus_width_16	= 0,
-+#endif
-+};
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+//	.det_pin	= ... not connected
-+//	.wp_pin		= ... not connected
-+//	.vcc_pin	= ... not connected
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+	{	/* USER PUSH BUTTON */
-+		.code		= KEY_ENTER,
-+		.gpio		= AT91_PIN_PB10,
-+		.active_low	= 1,
-+		.desc		= "user_pb",
-+		.wakeup		= 1,
-+	}
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+	.buttons	= ek_buttons,
-+	.nbuttons	= ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &ek_button_data,
-+	}
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-+	at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+	platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+	{	/* user_led (green) */
-+		.name			= "user_led",
-+		.gpio			= AT91_PIN_PB21,
-+		.active_low		= 0,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* USB Host */
-+	at91_add_device_usbh(&ek_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&ek_udc_data);
-+	/* SPI */
-+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* NAND */
-+	at91_add_device_nand(&ek_nand_data);
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+	/* Ethernet */
-+	at91_add_device_eth(&ek_macb_data);
-+	/* MMC */
-+	at91_add_device_mmc(0, &ek_mmc_data);
-+	/* Push Buttons */
-+	ek_add_device_buttons();
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
-+	/* Maintainer: calao-systems */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= ek_map_io,
-+	.init_irq	= ek_init_irq,
-+	.init_machine	= ek_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-sam9-l9260.c
-@@ -0,0 +1,199 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2006 Atmel
-+ *  Copyright (C) 2007 Olimex Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91sam9260_initialize(18432000);
-+
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-+
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+	at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+	.vbus_pin	= AT91_PIN_PC5,
-+	.pullup_pin	= 0,		/* pull-up driven by UDC */
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if !defined(CONFIG_MMC_AT91)
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 1,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+	},
-+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-+	{	/* DataFlash card */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+	},
-+#endif
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PA7,
-+	.is_rmii	= 0,
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+	{
-+		.name	= "Bootloader Area",
-+		.offset	= 0,
-+		.size	= 10 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "User Area",
-+		.offset	= 10 * 1024 * 1024,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-+	return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+//	.det_pin	= ... not connected
-+	.rdy_pin	= AT91_PIN_PC13,
-+	.enable_pin	= AT91_PIN_PC14,
-+	.partition_info	= nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+	.bus_width_16	= 1,
-+#else
-+	.bus_width_16	= 0,
-+#endif
-+};
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+	.slot_b		= 1,
-+	.wire4		= 1,
-+	.det_pin	= AT91_PIN_PC8,
-+	.wp_pin		= AT91_PIN_PC4,
-+//	.vcc_pin	= ... not connected
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* USB Host */
-+	at91_add_device_usbh(&ek_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&ek_udc_data);
-+	/* SPI */
-+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* NAND */
-+	at91_add_device_nand(&ek_nand_data);
-+	/* Ethernet */
-+	at91_add_device_eth(&ek_macb_data);
-+	/* MMC */
-+	at91_add_device_mmc(0, &ek_mmc_data);
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+}
-+
-+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
-+	/* Maintainer: Olimex */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= ek_map_io,
-+	.init_irq	= ek_init_irq,
-+	.init_machine	= ek_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-sam9260ek.c
-+++ b/arch/arm/mach-at91/board-sam9260ek.c
-@@ -25,6 +25,10 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- 
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -37,29 +41,29 @@
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 5 = USART0 .. USART5
-- *    6      = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 3,
--	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
--};
--
- static void __init ek_map_io(void)
- {
- 	/* Initialize processor: 18.432 MHz crystal */
- 	at91sam9260_initialize(18432000);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&ek_uart_config);
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+			   | ATMEL_UART_RI);
-+
-+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init ek_init_irq(void)
-@@ -85,6 +89,35 @@ static struct at91_udc_data __initdata e
- 
- 
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+	.ssc_id		= 0,
-+	.shortname	= "AT91SAM9260-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+	struct clk *pck0;
-+	struct clk *plla;
-+
-+	pck0 = clk_get(NULL, "pck0");
-+	plla = clk_get(NULL, "plla");
-+
-+	/* AT73C213 MCK Clock */
-+	at91_set_B_periph(AT91_PIN_PC1, 0);	/* PCK0 */
-+
-+	clk_set_parent(pck0, plla);
-+	clk_put(plla);
-+
-+	info->dac_clk = pck0;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
-  * SPI devices.
-  */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -110,6 +143,8 @@ static struct spi_board_info ek_spi_devi
- 		.chip_select	= 0,
- 		.max_speed_hz	= 10 * 1000 * 1000,
- 		.bus_num	= 1,
-+		.mode		= SPI_MODE_1,
-+		.platform_data	= &at73c213_data,
- 	},
- #endif
- };
-@@ -172,6 +207,74 @@ static struct at91_mmc_data __initdata e
- //	.vcc_pin	= ... not connected
- };
- 
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+	{	/* "bottom" led, green, userled1 to be defined */
-+		.name			= "ds5",
-+		.gpio			= AT91_PIN_PA6,
-+		.active_low		= 1,
-+		.default_trigger	= "none",
-+	},
-+	{	/* "power" led, yellow */
-+		.name			= "ds1",
-+		.gpio			= AT91_PIN_PA9,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+	{
-+		.gpio		= AT91_PIN_PA30,
-+		.code		= BTN_3,
-+		.desc		= "Button 3",
-+		.active_low	= 1,
-+		.wakeup		= 1,
-+	},
-+	{
-+		.gpio		= AT91_PIN_PA31,
-+		.code		= BTN_4,
-+		.desc		= "Button 4",
-+		.active_low	= 1,
-+		.wakeup		= 1,
-+	}
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+	.buttons	= ek_buttons,
-+	.nbuttons	= ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &ek_button_data,
-+	}
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
-+	at91_set_deglitch(AT91_PIN_PA30, 1);
-+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
-+	at91_set_deglitch(AT91_PIN_PA31, 1);
-+
-+	platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- 	/* Serial */
-@@ -190,6 +293,16 @@ static void __init ek_board_init(void)
- 	at91_add_device_mmc(0, &ek_mmc_data);
- 	/* I2C */
- 	at91_add_device_i2c(NULL, 0);
-+	/* SSC (to AT73C213) */
-+	at73c213_set_clk(&at73c213_data);
-+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* Push Buttons */
-+	ek_add_device_buttons();
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
- }
- 
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
---- a/arch/arm/mach-at91/board-sam9261ek.c
-+++ b/arch/arm/mach-at91/board-sam9261ek.c
-@@ -26,6 +26,8 @@
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
- #include <linux/dm9000.h>
- #include <linux/fb.h>
- #include <linux/gpio_keys.h>
-@@ -44,22 +46,12 @@
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 2 = USART0 .. USART2
-- *    3      = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 1,
--	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- 	/* Initialize processor: 18.432 MHz crystal */
-@@ -68,8 +60,11 @@ static void __init ek_map_io(void)
- 	/* Setup the LEDs */
- 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&ek_uart_config);
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init ek_init_irq(void)
-@@ -239,6 +234,35 @@ static void __init ek_add_device_ts(void
- #endif
- 
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+	.ssc_id		= 1,
-+	.shortname	= "AT91SAM9261-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+	struct clk *pck2;
-+	struct clk *plla;
-+
-+	pck2 = clk_get(NULL, "pck2");
-+	plla = clk_get(NULL, "plla");
-+
-+	/* AT73C213 MCK Clock */
-+	at91_set_B_periph(AT91_PIN_PB31, 0);	/* PCK2 */
-+
-+	clk_set_parent(pck2, plla);
-+	clk_put(plla);
-+
-+	info->dac_clk = pck2;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
-  * SPI devices
-  */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -252,10 +276,11 @@ static struct spi_board_info ek_spi_devi
- 	{
- 		.modalias	= "ads7846",
- 		.chip_select	= 2,
--		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-+		.max_speed_hz	= 125000 * 16,	/* max sample rate * clocks per sample */
- 		.bus_num	= 0,
- 		.platform_data	= &ads_info,
- 		.irq		= AT91SAM9261_ID_IRQ0,
-+		.controller_data = (void *) AT91_PIN_PA28,	/* CS pin */
- 	},
- #endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +296,9 @@ static struct spi_board_info ek_spi_devi
- 		.chip_select	= 3,
- 		.max_speed_hz	= 10 * 1000 * 1000,
- 		.bus_num	= 0,
-+		.mode		= SPI_MODE_1,
-+		.platform_data	= &at73c213_data,
-+		.controller_data = (void*) AT91_PIN_PA29,	/* default for CS3 is PA6, but it must be PA29 */
- 	},
- #endif
- };
-@@ -408,24 +436,28 @@ static struct gpio_keys_button ek_button
- 		.code		= BTN_0,
- 		.desc		= "Button 0",
- 		.active_low	= 1,
-+		.wakeup		= 1,
- 	},
- 	{
- 		.gpio		= AT91_PIN_PA26,
- 		.code		= BTN_1,
- 		.desc		= "Button 1",
- 		.active_low	= 1,
-+		.wakeup		= 1,
- 	},
- 	{
- 		.gpio		= AT91_PIN_PA25,
- 		.code		= BTN_2,
- 		.desc		= "Button 2",
- 		.active_low	= 1,
-+		.wakeup		= 1,
- 	},
- 	{
- 		.gpio		= AT91_PIN_PA24,
- 		.code		= BTN_3,
- 		.desc		= "Button 3",
- 		.active_low	= 1,
-+		.wakeup		= 1,
- 	}
- };
- 
-@@ -445,13 +477,13 @@ static struct platform_device ek_button_
- 
- static void __init ek_add_device_buttons(void)
- {
--	at91_set_gpio_input(AT91_PIN_PA27, 0);	/* btn0 */
-+	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
- 	at91_set_deglitch(AT91_PIN_PA27, 1);
--	at91_set_gpio_input(AT91_PIN_PA26, 0);	/* btn1 */
-+	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
- 	at91_set_deglitch(AT91_PIN_PA26, 1);
--	at91_set_gpio_input(AT91_PIN_PA25, 0);	/* btn2 */
-+	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
- 	at91_set_deglitch(AT91_PIN_PA25, 1);
--	at91_set_gpio_input(AT91_PIN_PA24, 0);	/* btn3 */
-+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
- 	at91_set_deglitch(AT91_PIN_PA24, 1);
- 
- 	platform_device_register(&ek_button_device);
-@@ -460,6 +492,29 @@ static void __init ek_add_device_buttons
- static void __init ek_add_device_buttons(void) {}
- #endif
- 
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+	{	/* "bottom" led, green, userled1 to be defined */
-+		.name			= "ds7",
-+		.gpio			= AT91_PIN_PA14,
-+		.active_low		= 1,
-+		.default_trigger	= "none",
-+	},
-+	{	/* "top" led, green, userled2 to be defined */
-+		.name			= "ds8",
-+		.gpio			= AT91_PIN_PA13,
-+		.active_low		= 1,
-+		.default_trigger	= "none",
-+	},
-+	{	/* "power" led, yellow */
-+		.name			= "ds1",
-+		.gpio			= AT91_PIN_PA23,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
- static void __init ek_board_init(void)
- {
- 	/* Serial */
-@@ -481,6 +536,9 @@ static void __init ek_board_init(void)
- 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- 	/* Touchscreen */
- 	ek_add_device_ts();
-+	/* SSC (to AT73C213) */
-+	at73c213_set_clk(&at73c213_data);
-+	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
- #else
- 	/* MMC */
- 	at91_add_device_mmc(0, &ek_mmc_data);
-@@ -489,6 +547,11 @@ static void __init ek_board_init(void)
- 	at91_add_device_lcdc(&ek_lcdc_data);
- 	/* Push Buttons */
- 	ek_add_device_buttons();
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
- }
- 
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
---- a/arch/arm/mach-at91/board-sam9263ek.c
-+++ b/arch/arm/mach-at91/board-sam9263ek.c
-@@ -43,29 +43,24 @@
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 2 = USART0 .. USART2
-- *    3      = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- 	/* Initialize processor: 16.367 MHz crystal */
- 	at91sam9263_initialize(16367660);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&ek_uart_config);
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init ek_init_irq(void)
-@@ -141,7 +136,7 @@ static struct spi_board_info ek_spi_devi
- 	{
- 		.modalias	= "ads7846",
- 		.chip_select	= 3,
--		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-+		.max_speed_hz	= 125000 * 16,	/* max sample rate * clocks per sample */
- 		.bus_num	= 0,
- 		.platform_data	= &ads_info,
- 		.irq		= AT91SAM9263_ID_IRQ1,
-@@ -301,9 +296,9 @@ static struct platform_device ek_button_
- 
- static void __init ek_add_device_buttons(void)
- {
--	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
-+	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
- 	at91_set_deglitch(AT91_PIN_PC5, 1);
--	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
-+	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
- 	at91_set_deglitch(AT91_PIN_PC4, 1);
- 
- 	platform_device_register(&ek_button_device);
-@@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = {
- 		.name			= "ds3",
- 		.gpio			= AT91_PIN_PB7,
- 		.default_trigger	= "heartbeat",
--	},
-+	}
- };
- 
- 
-@@ -374,6 +369,9 @@ static void __init ek_board_init(void)
- 	at91_add_device_ac97(&ek_ac97_data);
- 	/* LEDs */
- 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
- }
- 
- MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
---- a/arch/arm/mach-at91/board-sam9rlek.c
-+++ b/arch/arm/mach-at91/board-sam9rlek.c
-@@ -29,29 +29,24 @@
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
- 
- #include "generic.h"
- 
- 
--/*
-- * Serial port configuration.
-- *    0 .. 3 = USART0 .. USART3
-- *    4      = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
--	.console_tty	= 0,				/* ttyS0 */
--	.nr_tty		= 2,
--	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
--};
--
- static void __init ek_map_io(void)
- {
- 	/* Initialize processor: 12.000 MHz crystal */
- 	at91sam9rl_initialize(12000000);
- 
--	/* Setup the serial ports and console */
--	at91_init_serial(&ek_uart_config);
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-+	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
- }
- 
- static void __init ek_init_irq(void)
-@@ -61,6 +56,14 @@ static void __init ek_init_irq(void)
- 
- 
- /*
-+ * USB HS Device port
-+ */
-+static struct usba_platform_data __initdata ek_usba_udc_data = {
-+	.vbus_pin	= AT91_PIN_PA8,
-+};
-+
-+
-+/*
-  * MCI (SD/MMC)
-  */
- static struct at91_mmc_data __initdata ek_mmc_data = {
-@@ -180,6 +183,8 @@ static void __init ek_board_init(void)
- {
- 	/* Serial */
- 	at91_add_device_serial();
-+	/* USB HS */
-+	at91_add_device_usba(&ek_usba_udc_data);
- 	/* I2C */
- 	at91_add_device_i2c(NULL, 0);
- 	/* NAND */
-@@ -190,6 +195,9 @@ static void __init ek_board_init(void)
- 	at91_add_device_mmc(0, &ek_mmc_data);
- 	/* LCD Controller */
- 	at91_add_device_lcdc(&ek_lcdc_data);
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
- }
- 
- MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-tms.c
-@@ -0,0 +1,198 @@
-+/*
-+* linux/arch/arm/mach-at91/board-tms.c
-+*
-+*  Copyright (C) 2005 SAN People
-+*
-+*  Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com>
-+*
-+* This program is free software; you can redistribute it and/or modify
-+* it under the terms of the GNU General Public License as published by
-+* the Free Software Foundation; either version 2 of the License, or
-+* (at your option) any later version.
-+*
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+* GNU General Public License for more details.
-+*
-+* You should have received a copy of the GNU General Public License
-+* along with this program; if not, write to the Free Software
-+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+*/
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+#include <linux/serial_8250.h>
-+
-+
-+#define SERIAL_FLAGS	(UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ)
-+#define SERIAL_CLK	(1843200)
-+
-+
-+/*---------------------------------------------------------------------
-+ * External UART
-+ */
-+
-+#define PORT(_base, _irq)				\
-+	{						\
-+		.mapbase	= _base,		\
-+		.irq		= _irq,			\
-+		.uartclk	= SERIAL_CLK,		\
-+		.iotype		= UPIO_MEM,		\
-+		.regshift	= 0,			\
-+		.flags		= SERIAL_FLAGS,		\
-+	}
-+
-+static struct plat_serial8250_port tms_data[] = {
-+	PORT(0x70000000, AT91_PIN_PC3),
-+	PORT(0x80000000, AT91_PIN_PC5),
-+	{ },
-+};
-+
-+static struct platform_device tms_device = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev			=
-+		{
-+			.platform_data	= &tms_data,
-+		},
-+};
-+
-+static void setup_external_uart(void)
-+{
-+	at91_sys_write(AT91_SMC_CSR(2),
-+				  AT91_SMC_ACSS_STD
-+				| AT91_SMC_DBW_8
-+				| AT91_SMC_BAT
-+				| AT91_SMC_WSEN
-+				| AT91_SMC_NWS_(32)	/* wait states */
-+				| AT91_SMC_RWSETUP_(6)	/* setup time */
-+				| AT91_SMC_RWHOLD_(4)	/* hold time */
-+
-+	);
-+	at91_sys_write(AT91_SMC_CSR(6),
-+				  AT91_SMC_ACSS_STD
-+				| AT91_SMC_DBW_8
-+				| AT91_SMC_BAT
-+				| AT91_SMC_WSEN
-+				| AT91_SMC_NWS_(32)	/* wait states */
-+				| AT91_SMC_RWSETUP_(6)	/* setup time */
-+				| AT91_SMC_RWHOLD_(4)	/* hold time */
-+
-+	);
-+	at91_sys_write(AT91_SMC_CSR(7),
-+				  AT91_SMC_ACSS_STD
-+				| AT91_SMC_DBW_8
-+				| AT91_SMC_BAT
-+				| AT91_SMC_WSEN
-+				| AT91_SMC_NWS_(32)	/* wait states */
-+				| AT91_SMC_RWSETUP_(6)	/* setup time */
-+				| AT91_SMC_RWHOLD_(4)	/* hold time */
-+	);
-+
-+	platform_device_register(&tms_device);
-+}
-+
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata tms_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 5,
-+	.tty_map	= { 4, 0, 1, 2, 3 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init tms_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&tms_uart_config);
-+}
-+
-+static void __init tms_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+
-+static struct at91_eth_data __initdata tms_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PC4,
-+	.is_rmii	= 1,
-+};
-+
-+static struct at91_usbh_data __initdata tms_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+static struct spi_board_info tms_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+	{	 /* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 1,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	}
-+};
-+
-+static struct i2c_board_info __initdata tms_i2c_devices[] = {
-+	{
-+		I2C_BOARD_INFO("isl1208", 0x6f),
-+	}
-+};
-+
-+static void __init tms_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* Ethernet */
-+	at91_add_device_eth(&tms_eth_data);
-+	at91_add_device_usbh(&tms_usbh_data);
-+	/* I2C */
-+	at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices));
-+	/* SPI */
-+	at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices));
-+	/* Two port external UART */
-+	setup_external_uart();
-+}
-+
-+MACHINE_START(SWEDATMS, "Sweda TMS-100 Board")
-+	/* Maintainer: Luiz de Barros */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= tms_map_io,
-+	.init_irq	= tms_init_irq,
-+	.init_machine	= tms_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-tt9200.c
-@@ -0,0 +1,192 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-tt9200.c
-+ * Copyright (C) 2007 Toptechnology
-+ *
-+ * Based on board-ecbat91.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init tt9200_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PB27, AT91_PIN_PB27);
-+
-+	/* DBGU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART0 on ttyS1. (Rx & Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+	/* USART1 on ttyS2. (Rx & Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-+
-+	/* USART2 on ttyS3. (Rx & Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-+
-+	/* USART3 on ttyS4. (Rx, Tx, CTS, RTS) */
-+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+	/* Console on ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init tt9200_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata tt9200_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PB29,
-+	.is_rmii	= 0,
-+};
-+
-+static struct at91_usbh_data __initdata tt9200_usbh_data = {
-+	.ports		= 1,
-+};
-+
-+static struct i2c_board_info __initdata tt9200_i2c_devices[] = {
-+	{
-+		I2C_BOARD_INFO("rtc-m41t80", 0x68),
-+		.type	= "m41t80",
-+	}
-+};
-+
-+static struct at91_mmc_data __initdata tt9200_mmc_data = {
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+};
-+
-+
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata tt9200_flash_partitions[] =
-+{
-+	{
-+		.name	= "Darrell",
-+		.offset	= 0,
-+		.size	= 12 * 1056,
-+	},
-+	{
-+		.name	= "U-boot",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 110 * 1056,
-+	},
-+	{
-+		.name	= "U-boot env",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 8 * 1056,
-+	},
-+	{
-+		.name	= "Kernel",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 1534 * 1056,
-+	},
-+	{
-+		.name	= "Filesystem",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= MTDPART_SIZ_FULL,
-+	}
-+};
-+
-+static struct flash_platform_data __initdata tt9200_flash_platform = {
-+	.name		= "SPI Dataflash",
-+	.parts		= tt9200_flash_partitions,
-+	.nr_parts	= ARRAY_SIZE(tt9200_flash_partitions)
-+};
-+
-+#endif
-+
-+static struct spi_board_info __initdata tt9200_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		/* Errata #13 */
-+		.max_speed_hz	= 5 * 1000 * 1000,
-+		.bus_num	= 0,
-+#if defined(CONFIG_MTD_DATAFLASH)
-+		.platform_data	= &tt9200_flash_platform,
-+#endif
-+	},
-+};
-+
-+static struct gpio_led tt9200_leds[] = {
-+	{
-+		.name			= "led0",
-+		.gpio			= AT91_PIN_PB27,
-+		.active_low		= 1,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
-+static void __init tt9200_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+
-+	/* Ethernet */
-+	at91_add_device_eth(&tt9200_eth_data);
-+
-+	/* USB Host */
-+	at91_add_device_usbh(&tt9200_usbh_data);
-+
-+	/* I2C */
-+	at91_add_device_i2c(tt9200_i2c_devices, ARRAY_SIZE(tt9200_i2c_devices));
-+
-+	/* MMC */
-+	at91_add_device_mmc(0, &tt9200_mmc_data);
-+
-+	/* LEDS */
-+	at91_gpio_leds(tt9200_leds, ARRAY_SIZE(tt9200_leds));
-+
-+	/* SPI */
-+	at91_add_device_spi(tt9200_spi_devices, ARRAY_SIZE(tt9200_spi_devices));
-+}
-+
-+MACHINE_START(TT9200, "Toptech TT9200")
-+	/* Maintainer: toptech.com.ar */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= tt9200_map_io,
-+	.init_irq	= tt9200_init_irq,
-+	.init_machine	= tt9200_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-usb-a9260.c
-@@ -0,0 +1,215 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-usb-a9260.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2006 Atmel
-+ *  Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/clk.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+	/* Initialize processor: 12.000 MHz crystal */
-+	at91sam9260_initialize(12000000);
-+
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+	at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+	.vbus_pin	= AT91_PIN_PC5,
-+	.pullup_pin	= 0,		/* pull-up driven by UDC */
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PA31,
-+	.is_rmii	= 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+	{
-+		.name	= "Uboot & Kernel",
-+		.offset	= 0x00000000,
-+		.size	= 16 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "Root FS",
-+		.offset	= 0x01000000,
-+		.size	= 120 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "FS",
-+		.offset	= 0x08800000,
-+		.size	= 120 * 1024 * 1024,
-+	}
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-+	return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+//	.det_pin	= ... not connected
-+	.rdy_pin	= AT91_PIN_PC13,
-+	.enable_pin	= AT91_PIN_PC14,
-+	.partition_info	= nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+	.bus_width_16	= 1,
-+#else
-+	.bus_width_16	= 0,
-+#endif
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+	{	/* USER PUSH BUTTON */
-+		.code		= KEY_ENTER,
-+		.gpio		= AT91_PIN_PB10,
-+		.active_low	= 1,
-+		.desc		= "user_pb",
-+		.wakeup		= 1,
-+	}
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+	.buttons	= ek_buttons,
-+	.nbuttons	= ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &ek_button_data,
-+	}
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-+	at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+	platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+	{	/* user_led (green) */
-+		.name			= "user_led",
-+		.gpio			= AT91_PIN_PB21,
-+		.active_low		= 0,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* USB Host */
-+	at91_add_device_usbh(&ek_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&ek_udc_data);
-+	/* NAND */
-+	at91_add_device_nand(&ek_nand_data);
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+	/* Ethernet */
-+	at91_add_device_eth(&ek_macb_data);
-+	/* Push Buttons */
-+	ek_add_device_buttons();
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(USB_A9260, "CALAO USB_A9260")
-+	/* Maintainer: calao-systems */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= ek_map_io,
-+	.init_irq	= ek_init_irq,
-+	.init_machine	= ek_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-usb-a9263.c
-@@ -0,0 +1,230 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-usb-a9263.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2007 Atmel Corporation.
-+ *  Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+	/* Initialize processor: 12.00 MHz crystal */
-+	at91sam9263_initialize(12000000);
-+
-+	/* DGBU on ttyS0. (Rx & Tx only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* set serial console to ttyS0 (ie, DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+	at91sam9263_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+	.ports		= 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+	.vbus_pin	= AT91_PIN_PB11,
-+	.pullup_pin	= 0,		/* pull-up driven by UDC */
-+};
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if !defined(CONFIG_MMC_AT91)
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+	}
-+#endif
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PE31,
-+	.is_rmii	= 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+	{
-+		.name	= "Linux Kernel",
-+		.offset	= 0x00000000,
-+		.size	= 16 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "Root FS",
-+		.offset	= 0x01000000,
-+		.size	= 120 * 1024 * 1024,
-+	},
-+	{
-+		.name	= "FS",
-+		.offset	= 0x08800000,
-+		.size	= 120 * 1024 * 1024,
-+	}
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-+	return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+//	.det_pin	= ... not connected
-+	.rdy_pin	= AT91_PIN_PA22,
-+	.enable_pin	= AT91_PIN_PD15,
-+	.partition_info	= nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+	.bus_width_16	= 1,
-+#else
-+	.bus_width_16	= 0,
-+#endif
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+	{	/* USER PUSH BUTTON */
-+		.code		= KEY_ENTER,
-+		.gpio		= AT91_PIN_PB10,
-+		.active_low	= 1,
-+		.desc		= "user_pb",
-+		.wakeup		= 1,
-+	}
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+	.buttons	= ek_buttons,
-+	.nbuttons	= ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &ek_button_data,
-+	}
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-+	at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+	platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+	{	/* user_led (green) */
-+		.name			= "user_led",
-+		.gpio			= AT91_PIN_PB21,
-+		.active_low		= 1,
-+		.default_trigger	= "heartbeat",
-+	}
-+};
-+
-+
-+static void __init ek_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* USB Host */
-+	at91_add_device_usbh(&ek_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&ek_udc_data);
-+	/* SPI */
-+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* Ethernet */
-+	at91_add_device_eth(&ek_macb_data);
-+	/* NAND */
-+	at91_add_device_nand(&ek_nand_data);
-+	/* I2C */
-+	at91_add_device_i2c(NULL, 0);
-+	/* Push Buttons */
-+	ek_add_device_buttons();
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+	/* shutdown controller, wakeup button (5 msec low) */
-+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+				| AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(USB_A9263, "CALAO USB_A9263")
-+	/* Maintainer: calao-systems */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= ek_map_io,
-+	.init_irq	= ek_init_irq,
-+	.init_machine	= ek_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/clock.c
-+++ b/arch/arm/mach-at91/clock.c
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
- 
- #include "clock.h"
-+#include "generic.h"
- 
- 
- /*
-@@ -113,12 +114,34 @@ static void pmc_sys_mode(struct clk *clk
- 		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
- }
- 
-+static void pmc_uckr_mode(struct clk *clk, int is_on)
-+{
-+	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-+
-+	if (is_on) {
-+		is_on = AT91_PMC_LOCKU;
-+		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
-+	} else
-+		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
-+
-+	do {
-+		cpu_relax();
-+	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
-+}
-+
- /* USB function clocks (PLLB must be 48 MHz) */
- static struct clk udpck = {
- 	.name		= "udpck",
- 	.parent		= &pllb,
- 	.mode		= pmc_sys_mode,
- };
-+static struct clk utmi_clk = {
-+	.name		= "utmi_clk",
-+	.parent		= &main_clk,
-+	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
-+	.mode		= pmc_uckr_mode,
-+	.type		= CLK_TYPE_PLL,
-+};
- static struct clk uhpck = {
- 	.name		= "uhpck",
- 	.parent		= &pllb,
-@@ -254,6 +277,23 @@ EXPORT_SYMBOL(clk_get_rate);
- 
- /*------------------------------------------------------------------------*/
- 
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+	if (!at91_suspend_entering_slow_clock())
-+		return 0;
-+
-+	while (clk->parent)
-+		clk = clk->parent;
-+	return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- 
- /*
-@@ -362,7 +402,7 @@ static void __init init_programmable_clo
- 
- static int at91_clk_show(struct seq_file *s, void *unused)
- {
--	u32		scsr, pcsr, sr;
-+	u32		scsr, pcsr, uckr = 0, sr;
- 	struct clk	*clk;
- 
- 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-@@ -370,7 +410,10 @@ static int at91_clk_show(struct seq_file
- 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
- 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
- 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
--	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-+	if (!cpu_is_at91sam9rl())
-+		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
-+		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
- 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
- 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
- 
-@@ -383,6 +426,8 @@ static int at91_clk_show(struct seq_file
- 			state = (scsr & clk->pmc_mask) ? "on" : "off";
- 		else if (clk->mode == pmc_periph_mode)
- 			state = (pcsr & clk->pmc_mask) ? "on" : "off";
-+		else if (clk->mode == pmc_uckr_mode)
-+			state = (uckr & clk->pmc_mask) ? "on" : "off";
- 		else if (clk->pmc_mask)
- 			state = (sr & clk->pmc_mask) ? "on" : "off";
- 		else if (clk == &clk32k || clk == &main_clk)
-@@ -583,6 +628,17 @@ int __init at91_clock_init(unsigned long
- 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- 
- 	/*
-+	 * USB HS clock init
-+	 */
-+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
-+		/*
-+		 * multiplier is hard-wired to 40
-+		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
-+		 */
-+		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-+	}
-+
-+	/*
- 	 * MCK and CPU derive from one of those primary clocks.
- 	 * For now, assume this parentage won't change.
- 	 */
-@@ -599,6 +655,9 @@ int __init at91_clock_init(unsigned long
- 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- 
-+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
-+		list_add_tail(&utmi_clk.node, &clocks);
-+
- 	/* MCK and CPU clock are "always on" */
- 	clk_enable(&mck);
- 
---- a/arch/arm/mach-at91/generic.h
-+++ b/arch/arm/mach-at91/generic.h
-@@ -41,6 +41,7 @@ extern void __init at91_clock_associate(
-  /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
- 
-  /* GPIO */
- #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
---- a/arch/arm/mach-at91/gpio.c
-+++ b/arch/arm/mach-at91/gpio.c
-@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init
- 
- /*--------------------------------------------------------------------------*/
- 
--/* This lock class tells lockdep that GPIO irqs are in a different
-+/*
-+ * This lock class tells lockdep that GPIO irqs are in a different
-  * category than their parents, so it won't report false recursion.
-  */
- static struct lock_class_key gpio_lock_class;
-@@ -557,6 +558,7 @@ void __init at91_gpio_init(struct at91_g
- 		data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
- 
- 		/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-+		/* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */
- 		if (last && last->id == data->id)
- 			last->next = data;
- 	}
---- /dev/null
-+++ b/arch/arm/mach-at91/ics1523.c
-@@ -0,0 +1,208 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ *  Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define	AT91_TWI_ERROR	(AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg)		__raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val)	__raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+	int sclock;
-+
-+	/* Here, CKDIV = 1 and CHDIV = CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+	sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+	if (sclock % 10 >= 5)
-+		sclock = (sclock /10) - 5;
-+	else
-+		sclock = (sclock /10)- 6;
-+	sclock = (sclock + (4 - sclock %4)) >> 2;	/* div 4 */
-+
-+	at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+	int Status, nb_trial;
-+
-+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+	at91_twi_write(AT91_TWI_IADR, reg_address);
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+	/* Program temporizing period (300us) */
-+	udelay(300);
-+
-+	/* Wait TXcomplete ... */
-+	nb_trial = 0;
-+	Status = at91_twi_read(AT91_TWI_SR);
-+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+		nb_trial++;
-+		Status = at91_twi_read(AT91_TWI_SR);
-+	}
-+
-+	if (Status & AT91_TWI_TXCOMP) {
-+		*data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+		return ICS1523_ACCESS_OK;
-+	}
-+	else
-+		return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+	int Status, nb_trial;
-+
-+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+	at91_twi_write(AT91_TWI_IADR, reg_address);
-+	at91_twi_write(AT91_TWI_THR, data_out);
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+	/* Program temporizing period (300us) */
-+	udelay(300);
-+
-+	nb_trial = 0;
-+	Status = at91_twi_read(AT91_TWI_SR);
-+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+		nb_trial++;
-+		if (Status & AT91_TWI_ERROR) {
-+			/* If Underrun OR NACK - Start again */
-+			at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+			/*  Program temporizing period (300us) */
-+			udelay(300);
-+		}
-+		Status = at91_twi_read(AT91_TWI_SR);
-+	};
-+
-+	if (Status & AT91_TWI_TXCOMP)
-+		return ICS1523_ACCESS_OK;
-+	else
-+		return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+	int		nb_trial;
-+	int		ack = ICS1523_ACCESS_OK;
-+	unsigned int	status = 0xffffffff;
-+	struct clk	*twi_clk;
-+
-+	/* Map in TWI peripheral */
-+	twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+	if (!twi_base)
-+		return -ENOMEM;
-+
-+	/* pins used for TWI interface */
-+	at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
-+	at91_set_multi_drive(AT91_PIN_PA25, 1);
-+	at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
-+	at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+	/* Enable the TWI clock */
-+	twi_clk = clk_get(NULL, "twi_clk");
-+	if (IS_ERR(twi_clk))
-+		return ICS1523_ACCESS_ERROR;
-+	clk_enable(twi_clk);
-+
-+	/* Disable interrupts */
-+	at91_twi_write(AT91_TWI_IDR, -1);
-+
-+	/* Reset peripheral */
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+	/* Set Master mode */
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+	/* Set TWI Clock Waveform Generator Register */
-+	at91_ics1523_SetTwiClock(60000);     /* MCK in KHz = 60000 KHz */
-+
-+	/* ICS1523 Initialisation */
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+	nb_trial = 0;
-+	do {
-+		nb_trial++;
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+		/* Program 1ms temporizing period */
-+		mdelay(1);
-+
-+		at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+	} while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+	/* Program 1ms temporizing period */
-+	mdelay(1);
-+
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+	/* Program 1ms temporizing period */
-+	mdelay(1);
-+
-+	/* All done - cleanup */
-+	iounmap(twi_base);
-+	clk_disable(twi_clk);
-+	clk_put(twi_clk);
-+
-+	return ack;
-+}
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -26,12 +26,144 @@
- #include <asm/mach-types.h>
- 
- #include <asm/arch/at91_pmc.h>
--#include <asm/arch/at91rm9200_mc.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/cpu.h>
- 
- #include "generic.h"
- 
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+/*
-+ * The AT91RM9200 goes into self-refresh mode with this command, and will
-+ * terminate self-refresh automatically on the next SDRAM access.
-+ */
-+#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
-+#define sdram_selfrefresh_disable()	do {} while (0)
-+
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+	u32 lpr;
-+
-+	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-+
-+	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-+	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-+
-+#else
-+#include <asm/arch/at91sam9_sdramc.h>
-+
-+#ifdef CONFIG_ARCH_AT91SAM9263
-+/*
-+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
-+ * handle those cases both here and in the Suspend-To-RAM support.
-+ */
-+#define AT91_SDRAMC	AT91_SDRAMC0
-+#warning Assuming EB1 SDRAM controller is *NOT* used
-+#endif
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+	u32 lpr;
-+
-+	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-+
-+	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-+	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-+
-+/*
-+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
-+ *        additional SDRAM.  pm_slowclock.S will require a similar fix.
-+ */
-+
-+#endif
-+
-+
-+/*
-+ * Show the reason for the previous system reset.
-+ */
-+#if defined(AT91_SHDWC)
-+
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+static void __init show_reset_status(void)
-+{
-+	static char reset[] __initdata = "reset";
-+
-+	static char general[] __initdata = "general";
-+	static char wakeup[] __initdata = "wakeup";
-+	static char watchdog[] __initdata = "watchdog";
-+	static char software[] __initdata = "software";
-+	static char user[] __initdata = "user";
-+	static char unknown[] __initdata = "unknown";
-+
-+	static char signal[] __initdata = "signal";
-+	static char rtc[] __initdata = "rtc";
-+	static char rtt[] __initdata = "rtt";
-+	static char restore[] __initdata = "power-restored";
-+
-+	char *reason, *r2 = reset;
-+	u32 reset_type, wake_type;
-+
-+	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-+	wake_type = at91_sys_read(AT91_SHDW_SR);
-+
-+	switch (reset_type) {
-+	case AT91_RSTC_RSTTYP_GENERAL:
-+		reason = general;
-+		break;
-+	case AT91_RSTC_RSTTYP_WAKEUP:
-+		/* board-specific code enabled the wakeup sources */
-+		reason = wakeup;
-+
-+		/* "wakeup signal" */
-+		if (wake_type & AT91_SHDW_WAKEUP0)
-+			r2 = signal;
-+		else {
-+			r2 = reason;
-+			if (wake_type & AT91_SHDW_RTTWK)	/* rtt wakeup */
-+				reason = rtt;
-+			else if (wake_type & AT91_SHDW_RTCWK)	/* rtc wakeup */
-+				reason = rtc;
-+			else if (wake_type == 0)	/* power-restored wakeup */
-+				reason = restore;
-+			else				/* unknown wakeup */
-+				reason = unknown;
-+		}
-+		break;
-+	case AT91_RSTC_RSTTYP_WATCHDOG:
-+		reason = watchdog;
-+		break;
-+	case AT91_RSTC_RSTTYP_SOFTWARE:
-+		reason = software;
-+		break;
-+	case AT91_RSTC_RSTTYP_USER:
-+		reason = user;
-+		break;
-+	default:
-+		reason = unknown;
-+		break;
-+	}
-+	pr_info("AT91: Starting after %s %s\n", reason, r2);
-+}
-+#else
-+static void __init show_reset_status(void) {}
-+#endif
-+
- 
- static int at91_pm_valid_state(suspend_state_t state)
- {
-@@ -62,6 +194,7 @@ static int at91_pm_begin(suspend_state_t
-  * Verify that all the clocks are correct before entering
-  * slow-clock mode.
-  */
-+#warning "This should probably be moved to clocks.c"
- static int at91_pm_verify_clocks(void)
- {
- 	unsigned long scsr;
-@@ -107,24 +240,24 @@ static int at91_pm_verify_clocks(void)
- }
- 
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
-  * For example, some controllers (like OHCI) need one of the PLL clocks
-  * in order to act as a wakeup source, and those are not available when
-  * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
-  */
- int at91_suspend_entering_slow_clock(void)
- {
- 	return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
- 
- 
- static void (*slow_clock)(void);
- 
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91_slow_clock(void);
-+extern u32 at91_slow_clock_sz;
-+#endif
-+
- 
- static int at91_pm_enter(suspend_state_t state)
- {
-@@ -158,11 +291,14 @@ static int at91_pm_enter(suspend_state_t
- 			 * turning off the main oscillator; reverse on wakeup.
- 			 */
- 			if (slow_clock) {
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+				/* copy slow_clock handler to SRAM, and call it */
-+				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-+#endif
- 				slow_clock();
- 				break;
- 			} else {
--				/* DEVELOPMENT ONLY */
--				pr_info("AT91: PM - no slow clock mode yet ...\n");
-+				pr_info("AT91: PM - no slow clock mode enabled ...\n");
- 				/* FALLTHROUGH leaving master clock alone */
- 			}
- 
-@@ -175,13 +311,15 @@ static int at91_pm_enter(suspend_state_t
- 		case PM_SUSPEND_STANDBY:
- 			/*
- 			 * NOTE: the Wait-for-Interrupt instruction needs to be
--			 * in icache so the SDRAM stays in self-refresh mode until
--			 * the wakeup IRQ occurs.
-+			 * in icache so no SDRAM accesses are needed until the
-+			 * wakeup IRQ occurs and self-refresh is terminated.
- 			 */
- 			asm("b 1f; .align 5; 1:");
- 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
--			at91_sys_write(AT91_SDRAMC_SRR, 1);	/* self-refresh mode */
--			/* fall though to next state */
-+			sdram_selfrefresh_enable();
-+			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-+			sdram_selfrefresh_disable();
-+			break;
- 
- 		case PM_SUSPEND_ON:
- 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-@@ -196,6 +334,7 @@ static int at91_pm_enter(suspend_state_t
- 			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
- 
- error:
-+	sdram_selfrefresh_disable();
- 	target_state = PM_SUSPEND_ON;
- 	at91_irq_resume();
- 	at91_gpio_resume();
-@@ -220,21 +359,20 @@ static struct platform_suspend_ops at91_
- 
- static int __init at91_pm_init(void)
- {
--	printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
--	/* REVISIT allocations of SRAM should be dynamically managed.
--	 * FIQ handlers and other components will want SRAM/TCM too...
--	 */
--	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
--	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+	slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
- #endif
- 
--	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
-+	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- 	at91_sys_write(AT91_SDRAMC_LPR, 0);
-+#endif
- 
- 	suspend_set_ops(&at91_pm_ops);
- 
-+	show_reset_status();
- 	return 0;
- }
- arch_initcall(at91_pm_init);
---- /dev/null
-+++ b/arch/arm/mach-at91/pm_slowclock.S
-@@ -0,0 +1,283 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ *  Copyright (C) 2006 Savin Zlobec
-+ *
-+ * AT91SAM9 support:
-+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+#else
-+#include <asm/arch/at91sam9_sdramc.h>
-+#endif
-+
-+
-+#ifdef CONFIG_ARCH_AT91SAM9263
-+/*
-+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
-+ * handle those cases both here and in the Suspend-To-RAM support.
-+ */
-+#define AT91_SDRAMC	AT91_SDRAMC0
-+#warning Assuming EB1 SDRAM controller is *NOT* used
-+#endif
-+
-+/*
-+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
-+ * clock during suspend by adjusting its prescalar and divisor.
-+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
-+ *       are errata regarding adjusting the prescalar and divisor.
-+ */
-+#undef SLOWDOWN_MASTER_CLOCK
-+
-+#define MCKRDY_TIMEOUT		1000
-+#define MOSCRDY_TIMEOUT 	1000
-+#define PLLALOCK_TIMEOUT	1000
-+#define PLLBLOCK_TIMEOUT	1000
-+
-+
-+/*
-+ * Wait until master clock is ready (after switching master clock source)
-+ */
-+	.macro wait_mckrdy
-+	mov	r4, #MCKRDY_TIMEOUT
-+1:	sub	r4, r4, #1
-+	cmp	r4, #0
-+	beq	2f
-+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+	tst	r3, #AT91_PMC_MCKRDY
-+	beq	1b
-+2:
-+	.endm
-+
-+/*
-+ * Wait until master oscillator has stabilized.
-+ */
-+	.macro wait_moscrdy
-+	mov	r4, #MOSCRDY_TIMEOUT
-+1:	sub	r4, r4, #1
-+	cmp	r4, #0
-+	beq	2f
-+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+	tst	r3, #AT91_PMC_MOSCS
-+	beq	1b
-+2:
-+	.endm
-+
-+/*
-+ * Wait until PLLA has locked.
-+ */
-+	.macro wait_pllalock
-+	mov	r4, #PLLALOCK_TIMEOUT
-+1:	sub	r4, r4, #1
-+	cmp	r4, #0
-+	beq	2f
-+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+	tst	r3, #AT91_PMC_LOCKA
-+	beq	1b
-+2:
-+	.endm
-+
-+/*
-+ * Wait until PLLB has locked.
-+ */
-+	.macro wait_pllblock
-+	mov	r4, #PLLBLOCK_TIMEOUT
-+1:	sub	r4, r4, #1
-+	cmp	r4, #0
-+	beq	2f
-+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+	tst	r3, #AT91_PMC_LOCKB
-+	beq	1b
-+2:
-+	.endm
-+
-+	.text
-+
-+ENTRY(at91_slow_clock)
-+	/* Save registers on stack */
-+	stmfd	sp!, {r0 - r12, lr}
-+
-+	/*
-+	 * Register usage:
-+	 *  R1 = Base address of AT91_PMC
-+	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
-+	 *  R3 = temporary register
-+	 *  R4 = temporary register
-+	 */
-+	ldr	r1, .at91_va_base_pmc
-+	ldr	r2, .at91_va_base_sdramc
-+
-+	/* Drain write buffer */
-+	mcr	p15, 0, r0, c7, c10, 4
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+	/* Put SDRAM in self-refresh mode */
-+	mov	r3, #1
-+	str	r3, [r2, #AT91_SDRAMC_SRR]
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+	/* Enable SDRAM self-refresh mode */
-+	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+	str	r3, .saved_sam9_lpr
-+
-+	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+	/* Enable SDRAM self-refresh mode */
-+	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+	str	r3, .saved_sam9_lpr
-+
-+	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+	/* Save Master clock setting */
-+	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+	str	r3, .saved_mckr
-+
-+	/*
-+	 * Set the Master clock source to slow clock
-+	 */
-+	bic	r3, r3, #AT91_PMC_CSS
-+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+	wait_mckrdy
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+	/*
-+	 * Set the Master Clock PRES and MDIV fields.
-+	 *
-+	 * See AT91RM9200 errata #27 and #28 for details.
-+	 */
-+	mov	r3, #0
-+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+	wait_mckrdy
-+#endif
-+
-+	/* Save PLLA setting and disable it */
-+	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+	str	r3, .saved_pllar
-+
-+	mov	r3, #AT91_PMC_PLLCOUNT
-+	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
-+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+	wait_pllalock
-+
-+	/* Save PLLB setting and disable it */
-+	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+	str	r3, .saved_pllbr
-+
-+	mov	r3, #AT91_PMC_PLLCOUNT
-+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+	wait_pllblock
-+
-+	/* Turn off the main oscillator */
-+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+	bic	r3, r3, #AT91_PMC_MOSCEN
-+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+	/* Wait for interrupt */
-+	mcr	p15, 0, r0, c7, c0, 4
-+
-+	/* Turn on the main oscillator */
-+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+	orr	r3, r3, #AT91_PMC_MOSCEN
-+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+	wait_moscrdy
-+
-+	/* Restore PLLB setting */
-+	ldr	r3, .saved_pllbr
-+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+	wait_pllblock
-+
-+	/* Restore PLLA setting */
-+	ldr	r3, .saved_pllar
-+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+	wait_pllalock
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+	/*
-+	 * First set PRES if it was not 0,
-+	 * than set CSS and MDIV fields.
-+	 *
-+	 * See AT91RM9200 errata #27 and #28 for details.
-+	 */
-+	ldr	r3, .saved_mckr
-+	tst	r3, #AT91_PMC_PRES
-+	beq	2f
-+	and	r3, r3, #AT91_PMC_PRES
-+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+	wait_mckrdy
-+#endif
-+
-+	/*
-+	 * Restore master clock setting
-+	 */
-+2:	ldr	r3, .saved_mckr
-+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+	wait_mckrdy
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+	/* Do nothing - self-refresh is automatically disabled. */
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+	/* Restore LPR on AT91CAP9 */
-+	ldr	r3, .saved_sam9_lpr
-+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+	/* Restore LPR on AT91SAM9 */
-+	ldr	r3, .saved_sam9_lpr
-+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+	/* Restore registers, and return */
-+	ldmfd	sp!, {r0 - r12, pc}
-+
-+
-+.saved_mckr:
-+	.word 0
-+
-+.saved_pllar:
-+	.word 0
-+
-+.saved_pllbr:
-+	.word 0
-+
-+.saved_sam9_lpr:
-+	.word 0
-+
-+.at91_va_base_pmc:
-+	.word AT91_VA_BASE_SYS + AT91_PMC
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+.at91_va_base_sdramc:
-+	.word AT91_VA_BASE_SYS
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+.at91_va_base_sdramc:
-+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
-+#else
-+.at91_va_base_sdramc:
-+	.word AT91_VA_BASE_SYS + AT91_SDRAMC
-+#endif
-+
-+ENTRY(at91_slow_clock_sz)
-+	.word .-at91_slow_clock
---- a/arch/arm/mach-ks8695/Makefile
-+++ b/arch/arm/mach-ks8695/Makefile
-@@ -11,5 +11,8 @@ obj-				:=
- # PCI support is optional
- obj-$(CONFIG_PCI)		+= pci.o
- 
-+# LEDs
-+obj-$(CONFIG_LEDS)		+= leds.o
-+
- # Board-specific support
- obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
---- a/arch/arm/mach-ks8695/devices.c
-+++ b/arch/arm/mach-ks8695/devices.c
-@@ -176,6 +176,27 @@ static void __init ks8695_add_device_wat
- #endif
- 
- 
-+/* --------------------------------------------------------------------
-+ *  LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+short ks8695_leds_cpu = -1;
-+short ks8695_leds_timer = -1;
-+
-+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+	/* Enable GPIO to access the LEDs */
-+	gpio_direction_output(cpu_led, 1);
-+	gpio_direction_output(timer_led, 1);
-+
-+	ks8695_leds_cpu   = cpu_led;
-+	ks8695_leds_timer = timer_led;
-+}
-+#else
-+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-+
- /* -------------------------------------------------------------------- */
- 
- /*
---- a/arch/arm/mach-ks8695/gpio.c
-+++ b/arch/arm/mach-ks8695/gpio.c
-@@ -136,9 +136,9 @@ int __init_or_module gpio_direction_outp
- 	/* set line state */
- 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- 	if (state)
--		x |= (1 << pin);
-+		x |= IOPD_(pin);
- 	else
--		x &= ~(1 << pin);
-+		x &= ~IOPD_(pin);
- 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
- 
- 	/* set pin as output */
-@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, un
- 	/* set output line state */
- 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- 	if (state)
--		x |= (1 << pin);
-+		x |= IOPD_(pin);
- 	else
--		x &= ~(1 << pin);
-+		x &= ~IOPD_(pin);
- 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
- 
- 	local_irq_restore(flags);
-@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
- 		return -EINVAL;
- 
- 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
--	return (x & (1 << pin)) != 0;
-+	return (x & IOPD_(pin)) != 0;
- }
- EXPORT_SYMBOL(gpio_get_value);
- 
---- /dev/null
-+++ b/arch/arm/mach-ks8695/leds.c
-@@ -0,0 +1,94 @@
-+/*
-+ * LED driver for KS8695-based boards.
-+ *
-+ * Copyright (C) Andrew Victor
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/leds.h>
-+#include <asm/arch/devices.h>
-+#include <asm/arch/gpio.h>
-+
-+
-+static inline void ks8695_led_on(unsigned int led)
-+{
-+	gpio_set_value(led, 0);
-+}
-+
-+static inline void ks8695_led_off(unsigned int led)
-+{
-+	gpio_set_value(led, 1);
-+}
-+
-+static inline void ks8695_led_toggle(unsigned int led)
-+{
-+	unsigned long is_off = gpio_get_value(led);
-+	if (is_off)
-+		ks8695_led_on(led);
-+	else
-+		ks8695_led_off(led);
-+}
-+
-+
-+/*
-+ * Handle LED events.
-+ */
-+static void ks8695_leds_event(led_event_t evt)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	switch(evt) {
-+	case led_start:		/* System startup */
-+		ks8695_led_on(ks8695_leds_cpu);
-+		break;
-+
-+	case led_stop:		/* System stop / suspend */
-+		ks8695_led_off(ks8695_leds_cpu);
-+		break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+	case led_timer:		/* Every 50 timer ticks */
-+		ks8695_led_toggle(ks8695_leds_timer);
-+		break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+	case led_idle_start:	/* Entering idle state */
-+		ks8695_led_off(ks8695_leds_cpu);
-+		break;
-+
-+	case led_idle_end:	/* Exit idle state */
-+		ks8695_led_on(ks8695_leds_cpu);
-+		break;
-+#endif
-+
-+	default:
-+		break;
-+	}
-+
-+	local_irq_restore(flags);
-+}
-+
-+
-+static int __init leds_init(void)
-+{
-+	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-+		return -ENODEV;
-+
-+	leds_event = ks8695_leds_event;
-+
-+	leds_event(led_start);
-+	return 0;
-+}
-+
-+__initcall(leds_init);
---- a/arch/arm/mach-ks8695/pci.c
-+++ b/arch/arm/mach-ks8695/pci.c
-@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = {
- 	.write	= ks8695_pci_writeconfig,
- };
- 
--static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
-+static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
- {
- 	return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
- }
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1056,5 +1056,21 @@ config DEVPORT
- 
- source "drivers/s390/char/Kconfig"
- 
-+config AT91_SPI
-+	bool "SPI driver (legacy) for AT91RM9200 processors"
-+	depends on ARCH_AT91RM9200
-+	default y
-+	help
-+	  The SPI driver gives access to this serial bus on the AT91RM9200
-+	  processor.
-+
-+config AT91_SPIDEV
-+	bool "SPI device interface (legacy) for AT91RM9200 processors"
-+	depends on ARCH_AT91RM9200 && AT91_SPI
-+	default n
-+	help
-+	  The SPI driver gives user mode access to this serial
-+	  bus on the AT91RM9200 processor.
-+
- endmenu
- 
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -98,6 +98,8 @@ obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
- obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
- obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
- obj-$(CONFIG_TELCLOCK)		+= tlclk.o
-+obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
- 
- obj-$(CONFIG_MWAVE)		+= mwave/
- obj-$(CONFIG_AGP)		+= agp/
---- /dev/null
-+++ b/drivers/char/at91_spi.c
-@@ -0,0 +1,337 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES];	/* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock;			/* protect access to SPI bus */
-+static int current_device = -1;				/* currently selected SPI device */
-+static struct clk *spi_clk;				/* SPI clock */
-+static void __iomem *spi_base;				/* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg)		__raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val)	__raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+	/* Ensure that requested device is valid */
-+	if ((device < 0) || (device >= NR_SPI_DEVICES))
-+		panic("at91_spi: spi_access_bus called with invalid device");
-+
-+	if (spi_enabled == 0) {
-+		clk_enable(spi_clk);				/* Enable Peripheral clock */
-+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);	/* Enable SPI */
-+#ifdef DEBUG_SPI
-+		printk("SPI on\n");
-+#endif
-+	}
-+	spi_enabled++;
-+
-+	/* Lock the SPI bus */
-+	down(&spi_lock);
-+	current_device = device;
-+
-+	/* Configure SPI bus for device */
-+	at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+	if (device != current_device)
-+		panic("at91_spi: spi_release called with invalid device");
-+
-+	/* Release the SPI bus */
-+	current_device = -1;
-+	up(&spi_lock);
-+
-+	spi_enabled--;
-+	if (spi_enabled == 0) {
-+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);	/* Disable SPI */
-+		clk_disable(spi_clk);				/* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+		printk("SPI off\n");
-+#endif
-+	}
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+	int tx_size;
-+
-+	if (!list)
-+		panic("at91_spi: spi_transfer called with NULL transfer list");
-+	if (current_device == -1)
-+		panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+	/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+	tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+	/* Store transfer list */
-+	device->xfers = list;
-+	list->curr = 0;
-+
-+	/* Assume there must be at least one transfer */
-+	device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+	device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+	/* Program PDC registers */
-+	at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+	at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+	at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+	at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+	/* Is there a second transfer? */
-+	if (list->nr_transfers > 1) {
-+		device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+		device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+		/* Program Next PDC registers */
-+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+	}
-+	else {
-+		device->txnext = 0;
-+		device->rxnext = 0;
-+		at91_spi_write(ATMEL_PDC_TNCR, 0);
-+		at91_spi_write(ATMEL_PDC_RNCR, 0);
-+	}
-+
-+	// TODO: If we are doing consecutive transfers (at high speed, or
-+	//   small buffers), then it might be worth modifying the 'Delay between
-+	//   Consecutive Transfers' in the CSR registers.
-+	//   This is an issue if we cannot chain the next buffer fast enough
-+	//   in the interrupt handler.
-+
-+	/* Enable transmitter and receiver */
-+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+	at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX);		/* enable buffer complete interrupt */
-+	wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI transfer end\n");
-+#endif
-+
-+	return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+	unsigned int status;
-+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+	struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+	if (!list)
-+		panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+		status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR);	/* read status */
-+
-+	dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+	dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+	device->tx = device->txnext;	/* move next transfer to current transfer */
-+	device->rx = device->rxnext;
-+
-+	list->curr = list->curr + 1;
-+	if (list->curr == list->nr_transfers) {		/* all transfers complete */
-+		at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX);		/* disable interrupt */
-+
-+		/* Disable transmitter and receiver */
-+		at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+		device->xfers = NULL;
-+		complete(&transfer_complete);
-+	}
-+	else if (list->curr+1 == list->nr_transfers) {	/* no more next transfers */
-+		device->txnext = 0;
-+		device->rxnext = 0;
-+		at91_spi_write(ATMEL_PDC_TNCR, 0);
-+		at91_spi_write(ATMEL_PDC_RNCR, 0);
-+	}
-+	else {
-+		int i = (list->curr)+1;
-+
-+		/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+		int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+		device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+		device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+	int i;
-+	unsigned long scbr;
-+	struct resource *res;
-+
-+	init_MUTEX(&spi_lock);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -ENXIO;
-+
-+	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+		return -EBUSY;
-+
-+	spi_base = ioremap(res->start, res->end - res->start + 1);
-+	if (!spi_base) {
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -ENOMEM;
-+	}
-+
-+	spi_clk = clk_get(NULL, "spi_clk");
-+	if (IS_ERR(spi_clk)) {
-+		printk(KERN_ERR "at91_spi: no clock defined\n");
-+		iounmap(spi_base);
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -ENODEV;
-+	}
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST);	/* software reset of SPI controller */
-+
-+	/*
-+	 * Calculate the correct SPI baud-rate divisor.
-+	 */
-+	scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+	scbr = scbr + 1;		/* round up */
-+
-+	printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+	/* Set Chip Select registers to good defaults */
-+	for (i = 0; i < 4; i++) {
-+		at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+	}
-+
-+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+	memset(&spi_dev, 0, sizeof(spi_dev));
-+	spi_dev[0].pcs = 0xE;
-+	spi_dev[1].pcs = 0xD;
-+	spi_dev[2].pcs = 0xB;
-+	spi_dev[3].pcs = 0x7;
-+
-+	if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+		clk_put(spi_clk);
-+		iounmap(spi_base);
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -EBUSY;
-+	}
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);		/* Enable SPI */
-+
-+	return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);		/* Disable SPI */
-+	clk_put(spi_clk);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	iounmap(spi_base);
-+	release_mem_region(res->start, res->end - res->start + 1);
-+
-+	free_irq(AT91RM9200_ID_SPI, 0);
-+	return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+	.probe		= at91spi_probe,
-+	.remove		= __devexit_p(at91spi_remove),
-+	.driver		= {
-+		.name	= "at91_spi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+	return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+	platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-+MODULE_ALIAS("platform:at91_spi");
---- /dev/null
-+++ b/drivers/char/at91_spidev.c
-@@ -0,0 +1,233 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ *  Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+	unsigned int spi_device = (unsigned int) file->private_data;
-+
-+	struct mm_struct * mm;
-+	struct page ** maplist;
-+	struct spi_transfer_list* list;
-+	int    pgcount;
-+
-+	unsigned int ofs, pagelen;
-+	int res, i, err;
-+
-+	if (!count) {
-+		return 0;
-+	}
-+
-+	list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+	if (!list) {
-+		return -ENOMEM;
-+	}
-+
-+	mm = current->mm;
-+
-+	pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+	if (pgcount >= MAX_SPI_TRANSFERS) {
-+		kfree(list);
-+		return -EFBIG;
-+	}
-+
-+	maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+	if (!maplist) {
-+		kfree(list);
-+		return -ENOMEM;
-+	}
-+	flush_cache_all();
-+	down_read(&mm->mmap_sem);
-+	err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+	up_read(&mm->mmap_sem);
-+
-+	if (err < 0) {
-+		kfree(list);
-+		kfree(maplist);
-+		return err;
-+	}
-+	pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+	printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+	/* Set default return value = transfer length */
-+	res = count;
-+
-+	/*
-+	 * At this point, the virtual area buf[0] .. buf[count-1] will have
-+	 * corresponding pages mapped in the physical memory and locked until
-+	 * we unmap the kiobuf.  The pages cannot be swapped out or moved
-+	 * around.
-+	 */
-+	ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+	pagelen = PAGE_SIZE - ofs;
-+	if (count < pagelen)
-+		pagelen = count;
-+
-+	for (i = 0; i < pgcount; i++) {
-+		flush_dcache_page(maplist[i]);
-+
-+		list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+		list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+		printk("  %i: %x  (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+		ofs = 0;	/* all subsequent transfers start at beginning of a page */
-+		count = count - pagelen;
-+		pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+	}
-+	list->nr_transfers = pgcount;
-+
-+	/* Perform transfer on SPI bus */
-+	spi_access_bus(spi_device);
-+	spi_transfer(list);
-+	spi_release_bus(spi_device);
-+
-+	while (pgcount--) {
-+		page_cache_release (maplist[pgcount]);
-+	}
-+	flush_cache_all();
-+
-+	kfree(maplist);
-+	kfree(list);
-+
-+	return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	int spi_device = MINOR(inode->i_rdev);
-+
-+	if (spi_device >= NR_SPI_DEVICES)
-+		return -ENODEV;
-+
-+	// TODO: This interface can be used to configure the SPI bus.
-+	// Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+	switch(cmd) {
-+		default:
-+			return -ENOIOCTLCMD;
-+	}
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+	unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+	if (spi_device >= NR_SPI_DEVICES)
-+		return -ENODEV;
-+
-+	/*
-+	 * 'private_data' is actually a pointer, but we overload it with the
-+	 * value we want to store.
-+	 */
-+	file->private_data = (void *)spi_device;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.read		= spidev_rd_wr,
-+	.write		= (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+	.ioctl		= spidev_ioctl,
-+	.open		= spidev_open,
-+	.release	= spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+	int i;
-+#endif
-+
-+	if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+		printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+		return -EIO;
-+	}
-+
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_mk_dir("spi");
-+	for (i = 0; i < NR_SPI_DEVICES; i++) {
-+		devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+	}
-+#endif
-+	printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+	return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+	int i;
-+	for (i = 0; i < NR_SPI_DEVICES; i++) {
-+		devfs_remove("spi/%d", i);
-+	}
-+
-+	devfs_remove("spi");
-+#endif
-+
-+	unregister_chrdev(SPI_MAJOR, "spi");
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@ config I2C_AT91
- 	  to support combined I2C messages.  Use the i2c-gpio driver
- 	  unless your system can cope with those limitations.
- 
-+config I2C_AT91_CLOCKRATE
-+	prompt "Atmel AT91 I2C/TWI clock-rate"
-+	depends on I2C_AT91
-+	int
-+	default 100000
-+	help
-+	  Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- 	tristate "Au1550/Au1200 SMBus interface"
- 	depends on SOC_AU1550 || SOC_AU1200
-@@ -626,6 +634,14 @@ config I2C_VOODOO3
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-voodoo3.
- 
-+config I2C_PCA
-+	tristate "PCA9564"
-+	depends on I2C
-+	select I2C_ALGOPCA
-+	help
-+	  This driver support the Philips PCA 9564 Parallel bus to I2C
-+	  bus controller.
-+
- config I2C_PCA_ISA
- 	tristate "PCA9564 on an ISA bus"
- 	depends on ISA
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
- obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA)		+= i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
- obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
---- a/drivers/i2c/busses/i2c-at91.c
-+++ b/drivers/i2c/busses/i2c-at91.c
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
- 
--#define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
- 
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
- 
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo
- 	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);	/* Set Master mode */
- 
- 	/* Calcuate clock dividers */
--	cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+	cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- 	cdiv = cdiv + 1;	/* round up */
- 	ckdiv = 0;
- 	while (cdiv > 255) {
-@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo
- 		cdiv = cdiv >> 1;
- 	}
- 
--	if (cpu_is_at91rm9200()) {			/* AT91RM9200 Errata #22 */
--		if (ckdiv > 5) {
--			printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
--			ckdiv = 5;
--		}
-+	if (cpu_is_at91rm9200() && (ckdiv > 5)) {	/* AT91RM9200 Errata #22 */
-+		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+		ckdiv = 5;
-+	} else if (ckdiv > 7) {
-+		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+		ckdiv = 7;
- 	}
- 
- 	at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-pca.c
-@@ -0,0 +1,213 @@
-+/*
-+ *  Platform driver for PCA9564 I2C bus controller.
-+ *
-+ *  (C) 2006 Andrew Victor
-+ *
-+ *  Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ *    Copyright (C) 2004 Arcom Control Systems
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS		0x55	/* our address for slave mode */
-+#define PCA_CLOCK		I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT		2
-+#define REG_SHIFT		0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+	return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+	return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+	printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+	udelay(1);
-+	outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+	int res;
-+
-+	udelay(1);
-+	res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+	{
-+		static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+		printk("*** read  %s => %#04x\n", names[reg], res);
-+	}
-+#endif
-+	return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+	int ret = 0;
-+
-+	if (irq > -1) {
-+		ret = wait_event_interruptible(pca_wait,
-+				pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+	} else {
-+		while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+			udelay(100);
-+	}
-+	return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+	wake_up_interruptible(&pca_wait);
-+	return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+	.get_own		= pca_getown,
-+	.get_clock		= pca_getclock,
-+	.write_byte		= pca_writebyte,
-+	.read_byte		= pca_readbyte,
-+	.wait_for_interrupt	= pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+	.owner          = THIS_MODULE,
-+	.id		= I2C_HW_A_PLAT,
-+	.algo_data	= &pca_i2c_data,
-+	.name		= "PCA9564",
-+	.class		= I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	init_waitqueue_head(&pca_wait);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -ENODEV;
-+
-+	if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+		return -ENXIO;
-+
-+	base_addr = ioremap(res->start, PCA_IO_SIZE);
-+	if (base_addr == NULL)
-+		goto out_region;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq > -1) {
-+		if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+			printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+			goto out_remap;
-+		}
-+	}
-+
-+	/* set up the driverfs linkage to our parent device */
-+	pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+	if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+		printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+		goto out_irq;
-+	}
-+
-+	return 0;
-+
-+ out_irq:
-+	if (irq > -1)
-+		free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+	iounmap(base_addr);
-+
-+ out_region:
-+	release_mem_region(res->start, PCA_IO_SIZE);
-+	return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	i2c_del_adapter(&pca_i2c_ops);
-+
-+	if (irq > 0)
-+		free_irq(irq, NULL);
-+
-+	iounmap(base_addr);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	release_mem_region(res->start, PCA_IO_SIZE);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+	.probe		= pca_i2c_probe,
-+	.remove		= __devexit_p(pca_i2c_remove),
-+	.driver		= {
-+		.name	= "pca9564",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+	return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+	platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/mmc/host/at91_mci.c
-+++ b/drivers/mmc/host/at91_mci.c
-@@ -659,13 +659,14 @@ static void at91_mci_set_ios(struct mmc_
- 	/* maybe switch power to the card */
- 	if (host->board->vcc_pin) {
- 		switch (ios->power_mode) {
--			case MMC_POWER_OFF:
--				gpio_set_value(host->board->vcc_pin, 0);
--				break;
--			case MMC_POWER_UP:
--			case MMC_POWER_ON:
--				gpio_set_value(host->board->vcc_pin, 1);
--				break;
-+		case MMC_POWER_OFF:
-+			gpio_set_value(host->board->vcc_pin, 0);
-+			break;
-+		case MMC_POWER_UP:
-+			gpio_set_value(host->board->vcc_pin, 1);
-+			break;
-+		default:
-+			break;
- 		}
- 	}
- }
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -270,5 +270,17 @@ config MTD_DOCPROBE_55AA
- 	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- 	  you have managed to wipe the first block.
- 
--endmenu
-+config MTD_AT91_DATAFLASH
-+	tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+	help
-+	  This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+	  If you have such a board, say 'Y'.
-+
-+config DATAFLASH_ALWAYS_ADD_DEVICE
-+	bool "Register whole DataFlash device"
-+	depends on MTD_AT91_DATAFLASH
-+	help
-+	  Always add the whole DataFlash device when using MTD partitions.
- 
-+endmenu
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
---- /dev/null
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -0,0 +1,673 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/spi.h>
-+
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
-+
-+#define OP_READ_CONTINUOUS	0xE8
-+#define OP_READ_PAGE		0xD2
-+#define OP_READ_BUFFER1		0xD4
-+#define OP_READ_BUFFER2		0xD6
-+#define OP_READ_STATUS		0xD7
-+
-+#define OP_ERASE_PAGE		0x81
-+#define OP_ERASE_BLOCK		0x50
-+
-+#define OP_TRANSFER_BUF1	0x53
-+#define OP_TRANSFER_BUF2	0x55
-+#define OP_COMPARE_BUF1		0x60
-+#define OP_COMPARE_BUF2		0x61
-+
-+#define OP_PROGRAM_VIA_BUF1	0x82
-+#define OP_PROGRAM_VIA_BUF2	0x85
-+
-+struct dataflash_local
-+{
-+	int spi;			/* SPI chip-select number */
-+
-+	unsigned int page_size;		/* number of bytes per page */
-+	unsigned short page_offset;	/* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 32 * 8 * 528,	/* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 6 * 32 * 8 * 528,	/* 6 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 9 sectors */
-+	}
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 64 * 8 * 528,	/* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 4 * 64 * 8 * 528,	/* 4 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 11 sectors */
-+	}
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		name:		"romboot",
-+		offset:		0,
-+		size:		16 * 1056,	/* 160 Kb */
-+		mask_flags:	MTD_WRITEABLE,		/* read-only */
-+	},
-+	{
-+		name:		"uboot",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		128 * 1056,		/* 1 MB */
-+	},
-+	{
-+		name:		"kernel",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		1024 * 1056,		/* 1 MB */
-+	},
-+	{
-+		name:		"filesystem",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		MTDPART_SIZ_FULL,
-+	}
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 12 * 1056,		/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "configuration",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 20 * 1056,
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 1520 * 1056,
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,
-+	}
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 32 * 8 * 1056,	/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
-+	}
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
-+   SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+   If this is not valid, then either (i) each dataflash 'priv' structure
-+   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+   another mechanism.   */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+	struct spi_transfer_list* list = spi_transfer_desc;
-+
-+	list->tx[0] = tx;	list->txlen[0] = tx_len;
-+	list->rx[0] = rx;	list->rxlen[0] = rx_len;
-+
-+	list->tx[1] = txnext;	list->txlen[1] = txnext_len;
-+	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
-+
-+	list->nr_transfers = nr;
-+
-+	return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+	char* command = kmalloc(2, GFP_KERNEL);
-+
-+	if (!command)
-+		return;
-+
-+	do {
-+		command[0] = OP_READ_STATUS;
-+		command[1] = 0;
-+
-+		do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+	} while ((command[1] & 0x80) == 0);
-+
-+	kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+	unsigned short status;
-+	char* command = kmalloc(2, GFP_KERNEL);
-+
-+	if (!command)
-+		return 0;
-+
-+	command[0] = OP_READ_STATUS;
-+	command[1] = 0;
-+
-+	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+	status = command[1];
-+
-+	kfree(command);
-+	return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int pageaddr;
-+	char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+	/* Sanity checks */
-+	if (instr->addr + instr->len > mtd->size)
-+		return -EINVAL;
-+	if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+		return -EINVAL;
-+	if ((instr->addr % priv->page_size) != 0)
-+		return -EINVAL;
-+
-+	command = kmalloc(4, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	while (instr->len > 0) {
-+		/* Calculate flash page address */
-+		pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+		command[0] = OP_ERASE_PAGE;
-+		command[1] = (pageaddr & 0x00FF0000) >> 16;
-+		command[2] = (pageaddr & 0x0000FF00) >> 8;
-+		command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+		printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+		/* Send command to SPI device */
-+		spi_access_bus(priv->spi);
-+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+		at91_dataflash_waitready();		/* poll status until ready */
-+		spi_release_bus(priv->spi);
-+
-+		instr->addr += priv->page_size;		/* next page */
-+		instr->len -= priv->page_size;
-+	}
-+
-+	kfree(command);
-+
-+	/* Inform MTD subsystem that erase is complete */
-+	instr->state = MTD_ERASE_DONE;
-+	if (instr->callback)
-+		instr->callback(instr);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ *   from   : Start offset in flash device
-+ *   len    : Amount to read
-+ *   retlen : About of data actually read
-+ *   buf    : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int addr;
-+	char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+	*retlen = 0;
-+
-+	/* Sanity checks */
-+	if (!len)
-+		return 0;
-+	if (from + len > mtd->size)
-+		return -EINVAL;
-+
-+	/* Calculate flash page/byte address */
-+	addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+	command = kmalloc(8, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	command[0] = OP_READ_CONTINUOUS;
-+	command[1] = (addr & 0x00FF0000) >> 16;
-+	command[2] = (addr & 0x0000FF00) >> 8;
-+	command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+	printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+	/* Send command to SPI device */
-+	spi_access_bus(priv->spi);
-+	do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+	spi_release_bus(priv->spi);
-+
-+	*retlen = len;
-+	kfree(command);
-+	return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ *   to     : Start offset in flash device
-+ *   len    : Amount to write
-+ *   retlen : Amount of data actually written
-+ *   buf    : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int pageaddr, addr, offset, writelen;
-+	size_t remaining;
-+	u_char *writebuf;
-+	unsigned short status;
-+	int res = 0;
-+	char* command;
-+	char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+	*retlen = 0;
-+
-+	/* Sanity checks */
-+	if (!len)
-+		return 0;
-+	if (to + len > mtd->size)
-+		return -EINVAL;
-+
-+	command = kmalloc(4, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	pageaddr = ((unsigned)to / priv->page_size);
-+	offset = ((unsigned)to % priv->page_size);
-+	if (offset + len > priv->page_size)
-+		writelen = priv->page_size - offset;
-+	else
-+		writelen = len;
-+	writebuf = (u_char *)buf;
-+	remaining = len;
-+
-+	/* Allocate temporary buffer */
-+	tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+	if (!tmpbuf) {
-+		kfree(command);
-+		return -ENOMEM;
-+	}
-+
-+	/* Gain access to the SPI bus */
-+	spi_access_bus(priv->spi);
-+
-+	while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+		printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+		/* (1) Transfer to Buffer1 */
-+		if (writelen != priv->page_size) {
-+			addr = pageaddr << priv->page_offset;
-+			command[0] = OP_TRANSFER_BUF1;
-+			command[1] = (addr & 0x00FF0000) >> 16;
-+			command[2] = (addr & 0x0000FF00) >> 8;
-+			command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+			printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+			do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+			at91_dataflash_waitready();
-+		}
-+
-+		/* (2) Program via Buffer1 */
-+		addr = (pageaddr << priv->page_offset) + offset;
-+		command[0] = OP_PROGRAM_VIA_BUF1;
-+		command[1] = (addr & 0x00FF0000) >> 16;
-+		command[2] = (addr & 0x0000FF00) >> 8;
-+		command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+		printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+		do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+		at91_dataflash_waitready();
-+
-+		/* (3) Compare to Buffer1 */
-+		addr = pageaddr << priv->page_offset;
-+		command[0] = OP_COMPARE_BUF1;
-+		command[1] = (addr & 0x00FF0000) >> 16;
-+		command[2] = (addr & 0x0000FF00) >> 8;
-+		command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+		printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+		at91_dataflash_waitready();
-+
-+		/* Get result of the compare operation */
-+		status = at91_dataflash_status();
-+		if (status & 0x40) {
-+			printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+			remaining = 0;
-+			writelen = 0;
-+			res = -EIO;
-+		}
-+
-+		remaining = remaining - writelen;
-+		pageaddr++;
-+		offset = 0;
-+		writebuf += writelen;
-+		*retlen += writelen;
-+
-+		if (remaining > priv->page_size)
-+			writelen = priv->page_size;
-+		else
-+			writelen = remaining;
-+	}
-+
-+	/* Release SPI bus */
-+	spi_release_bus(priv->spi);
-+
-+	kfree(tmpbuf);
-+	kfree(command);
-+	return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+		int nr_pages, int pagesize, int pageoffset)
-+{
-+	struct mtd_info *device;
-+	struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *mtd_parts = 0;
-+	int mtd_parts_nr = 0;
-+#endif
-+
-+	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+		printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+		return 0;
-+	}
-+
-+	device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+	if (!device)
-+		return -ENOMEM;
-+	memset(device, 0, sizeof(struct mtd_info));
-+
-+	device->name = (char *)&device[1];
-+	sprintf(device->name, "%s.spi%d", name, channel);
-+	device->size = nr_pages * pagesize;
-+	device->erasesize = pagesize;
-+	device->writesize = pagesize;
-+	device->owner = THIS_MODULE;
-+	device->type = MTD_DATAFLASH;
-+	device->flags = MTD_WRITEABLE;
-+	device->erase = at91_dataflash_erase;
-+	device->read = at91_dataflash_read;
-+	device->write = at91_dataflash_write;
-+
-+	priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+	if (!priv) {
-+		kfree(device);
-+		return -ENOMEM;
-+	}
-+	memset(priv, 0, sizeof(struct dataflash_local));
-+
-+	priv->spi = channel;
-+	priv->page_size = pagesize;
-+	priv->page_offset = pageoffset;
-+	device->priv = priv;
-+
-+	mtd_devices[nr_devices] = device;
-+	nr_devices++;
-+	printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+	mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+	if (mtd_parts_nr <= 0) {
-+		switch (IDsize) {
-+			case SZ_2M:
-+				mtd_parts = static_partitions_2M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+				break;
-+			case SZ_4M:
-+				mtd_parts = static_partitions_4M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+				break;
-+			case SZ_8M:
-+				mtd_parts = static_partitions_8M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+				break;
-+		}
-+	}
-+
-+	if (mtd_parts_nr > 0) {
-+#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE
-+		add_mtd_device(device);
-+#endif
-+		return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+	}
-+#endif
-+	return add_mtd_device(device);		/* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ *   Device            Density         ID code                 Nr Pages        Page Size       Page offset
-+ *   AT45DB011B        1Mbit   (128K)  xx0011xx (0x0c)         512             264             9
-+ *   AT45DB021B        2Mbit   (256K)  xx0101xx (0x14)         1025            264             9
-+ *   AT45DB041B        4Mbit   (512K)  xx0111xx (0x1c)         2048            264             9
-+ *   AT45DB081B        8Mbit   (1M)    xx1001xx (0x24)         4096            264             9
-+ *   AT45DB0161B       16Mbit  (2M)    xx1011xx (0x2c)         4096            528             10
-+ *   AT45DB0321B       32Mbit  (4M)    xx1101xx (0x34)         8192            528             10
-+ *   AT45DB0642        64Mbit  (8M)    xx1111xx (0x3c)         8192            1056            11
-+ *   AT45DB1282        128Mbit (16M)   xx0100xx (0x10)         16384           1056            11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+	int res = 0;
-+	unsigned short status;
-+
-+	spi_access_bus(channel);
-+	status = at91_dataflash_status();
-+	spi_release_bus(channel);
-+	if (status != 0xff) {			/* no dataflash device there */
-+		switch (status & 0x3c) {
-+			case 0x0c:	/* 0 0 1 1 */
-+				res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+				break;
-+			case 0x14:	/* 0 1 0 1 */
-+				res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+				break;
-+			case 0x1c:	/* 0 1 1 1 */
-+				res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+				break;
-+			case 0x24:	/* 1 0 0 1 */
-+				res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+				break;
-+			case 0x2c:	/* 1 0 1 1 */
-+				res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+				break;
-+			case 0x34:	/* 1 1 0 1 */
-+				res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+				break;
-+			case 0x3c:	/* 1 1 1 1 */
-+				res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+				break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+//			case 0x10:	/* 0 1 0 0 */
-+//				res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+//				break;
-+			default:
-+				printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+		}
-+	}
-+
-+	return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+	if (!spi_transfer_desc)
-+		return -ENOMEM;
-+
-+	/* DataFlash (SPI chip select 0) */
-+	at91_dataflash_detect(0);
-+
-+	if (machine_is_sweda_tms())
-+		at91_dataflash_detect(1);	/* DataFlash device (SPI chip select 1) */
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	/* DataFlash card (SPI chip select 3) */
-+	at91_dataflash_detect(3);
-+#endif
-+
-+	return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+		if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+			del_mtd_partitions(mtd_devices[i]);
-+#else
-+			del_mtd_device(mtd_devices[i]);
-+#endif
-+			kfree(mtd_devices[i]->priv);
-+			kfree(mtd_devices[i]);
-+		}
-+	}
-+	nr_devices = 0;
-+	kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -273,12 +273,53 @@ config MTD_NAND_CS553X
- 	  If you say "m", the module will be called "cs553x_nand.ko".
- 
- config MTD_NAND_AT91
--	bool "Support for NAND Flash / SmartMedia on AT91"
-+	tristate "Support for NAND Flash / SmartMedia on AT91"
- 	depends on ARCH_AT91
- 	help
- 	  Enables support for NAND Flash / Smart Media Card interface
- 	  on Atmel AT91 processors.
- 
-+choice
-+	prompt "ECC management for NAND Flash / SmartMedia on AT91"
-+	depends on MTD_NAND_AT91
-+
-+config MTD_NAND_AT91_ECC_SOFT
-+	bool "Software ECC"
-+	depends on MTD_NAND_AT91
-+	help
-+	  Uses software ECC.
-+
-+	  NB : hardware and software ECC schemes are incompatible.
-+	  If you switch from one to another, you'll have to erase your
-+	  mtd partition.
-+
-+config MTD_NAND_AT91_ECC_HW
-+	bool "Hardware ECC"
-+	depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9)
-+	help
-+	  Uses hardware ECC provided by the AT91 processor
-+	  instead of software ECC.
-+	  The hardware ECC controller is capable of single bit error
-+	  correction and 2-bit random detection per page.
-+
-+	  NB : hardware and software ECC schemes are incompatible.
-+	  If you switch from one to another, you'll have to erase your
-+	  mtd partition.
-+
-+	  If unsure, say Y
-+
-+config MTD_NAND_AT91_ECC_NONE
-+	bool "No ECC (Testing Only)"
-+	depends on MTD_NAND_AT91
-+	help
-+	  No ECC will be used.
-+	  It's not a good idea and it should be reserved for testing
-+	  purpose only.
-+
-+	  If unsure, say N
-+
-+endchoice
-+
- config MTD_NAND_CM_X270
- 	tristate "Support for NAND Flash on CM-X270 modules"
- 	depends on MTD_NAND && MACH_ARMCORE
---- a/drivers/mtd/nand/at91_nand.c
-+++ b/drivers/mtd/nand/at91_nand.c
-@@ -9,6 +9,15 @@
-  *  Derived from drivers/mtd/spia.c
-  *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
-  *
-+ *
-+ *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
-+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
-+ *
-+ *     Derived from Das U-Boot source code
-+ *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
-+ *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-@@ -28,15 +37,75 @@
- #include <asm/hardware.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-+#include <asm/arch/at91_ecc.h>
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-+#define hard_ecc	1
-+#else
-+#define hard_ecc	0
-+#endif
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-+#define no_ecc		1
-+#else
-+#define no_ecc		0
-+#endif
-+
-+/* Register access macros */
-+#define ecc_readl(base, reg)		__raw_readl(base + reg)
-+#define ecc_writel(base, reg, value)	__raw_writel((value), base + reg)
-+
-+
-+/*
-+ * OOB layout for large page size.
-+ * bad block info is on bytes 0 and 1
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_large = {
-+	.eccbytes	= 4,
-+	.eccpos		= {60, 61, 62, 63},
-+	.oobfree	= { {2, 58} },
-+};
-+
-+/*
-+ * OOB layout for small page size
-+ * bad block info is on bytes 4 and 5
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_small = {
-+	.eccbytes	= 4,
-+	.eccpos		= {0, 1, 2, 3},
-+	.oobfree	= { {6, 10} },
-+};
- 
- struct at91_nand_host {
- 	struct nand_chip	nand_chip;
- 	struct mtd_info		mtd;
- 	void __iomem		*io_base;
- 	struct at91_nand_data	*board;
-+	struct device		*dev;
-+	void __iomem		*ecc;
- };
- 
- /*
-+ * Enable NAND chip-select.
-+ */
-+static void at91_nand_enable(struct at91_nand_host *host)
-+{
-+	if (host->board->enable_pin)
-+		at91_set_gpio_value(host->board->enable_pin, 0);
-+}
-+
-+/*
-+ * Disable NAND chip-select.
-+ */
-+static void at91_nand_disable(struct at91_nand_host *host)
-+{
-+	if (host->board->enable_pin)
-+		at91_set_gpio_value(host->board->enable_pin, 1);
-+}
-+
-+/*
-  * Hardware specific access to control-lines
-  */
- static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-@@ -44,6 +113,13 @@ static void at91_nand_cmd_ctrl(struct mt
- 	struct nand_chip *nand_chip = mtd->priv;
- 	struct at91_nand_host *host = nand_chip->priv;
- 
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		if (ctrl & NAND_NCE)
-+			at91_nand_enable(host);
-+		else
-+			at91_nand_disable(host);
-+	}
-+
- 	if (cmd == NAND_CMD_NONE)
- 		return;
- 
-@@ -65,27 +141,249 @@ static int at91_nand_device_ready(struct
- }
- 
- /*
-- * Enable NAND.
-+ * write oob for small pages
-  */
--static void at91_nand_enable(struct at91_nand_host *host)
-+static int at91_nand_write_oob_512(struct mtd_info *mtd,
-+		struct nand_chip *chip, int page)
- {
--	if (host->board->enable_pin)
--		at91_set_gpio_value(host->board->enable_pin, 0);
-+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-+	int eccsize = chip->ecc.size, length = mtd->oobsize;
-+	int len, pos, status = 0;
-+	const uint8_t *bufpoi = chip->oob_poi;
-+
-+	pos = eccsize + chunk;
-+
-+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-+	len = min_t(int, length, chunk);
-+	chip->write_buf(mtd, bufpoi, len);
-+	bufpoi += len;
-+	length -= len;
-+	if (length > 0)
-+		chip->write_buf(mtd, bufpoi, length);
-+
-+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+	status = chip->waitfunc(mtd, chip);
-+
-+	return status & NAND_STATUS_FAIL ? -EIO : 0;
-+
- }
- 
- /*
-- * Disable NAND.
-+ * read oob for small pages
-  */
--static void at91_nand_disable(struct at91_nand_host *host)
-+static int at91_nand_read_oob_512(struct mtd_info *mtd,
-+		struct nand_chip *chip,	int page, int sndcmd)
- {
--	if (host->board->enable_pin)
--		at91_set_gpio_value(host->board->enable_pin, 1);
-+	if (sndcmd) {
-+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+		sndcmd = 0;
-+	}
-+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+	return sndcmd;
-+}
-+
-+/*
-+ * Calculate HW ECC
-+ *
-+ * mtd:        MTD block structure
-+ * dat:        raw data (unused)
-+ * ecc_code:   buffer for ECC
-+ */
-+static int at91_nand_calculate(struct mtd_info *mtd,
-+		const u_char *dat, unsigned char *ecc_code)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct at91_nand_host *host = nand_chip->priv;
-+	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-+	unsigned int ecc_value;
-+
-+	/* get the first 2 ECC bytes */
-+	ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR);
-+
-+	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-+	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-+
-+	/* get the last 2 ECC bytes */
-+	ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY;
-+
-+	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-+	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-+
-+	return 0;
- }
- 
-+/*
-+ * HW ECC read page function
-+ *
-+ * mtd:        mtd info structure
-+ * chip:       nand chip info structure
-+ * buf:        buffer to store read data
-+ */
-+static int at91_nand_read_page(struct mtd_info *mtd,
-+		struct nand_chip *chip, uint8_t *buf)
-+{
-+	int eccsize = chip->ecc.size;
-+	int eccbytes = chip->ecc.bytes;
-+	uint32_t *eccpos = chip->ecc.layout->eccpos;
-+	uint8_t *p = buf;
-+	uint8_t *oob = chip->oob_poi;
-+	uint8_t *ecc_pos;
-+	int stat;
-+
-+	/* read the page */
-+	chip->read_buf(mtd, p, eccsize);
-+
-+	/* move to ECC position if needed */
-+	if (eccpos[0] != 0) {
-+		/*
-+		 * This only works on large pages because the ECC controller
-+		 * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
-+		 * Anyway, for small pages, the eccpos[0] == 0
-+		 */
-+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-+				mtd->writesize + eccpos[0], -1);
-+	}
-+
-+	/* the ECC controller needs to read the ECC just after the data */
-+	ecc_pos = oob + eccpos[0];
-+	chip->read_buf(mtd, ecc_pos, eccbytes);
-+
-+	/* check if there's an error */
-+	stat = chip->ecc.correct(mtd, p, oob, NULL);
-+
-+	if (stat < 0)
-+		mtd->ecc_stats.failed++;
-+	else
-+		mtd->ecc_stats.corrected += stat;
-+
-+	/* get back to oob start (end of page) */
-+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-+
-+	/* read the oob */
-+	chip->read_buf(mtd, oob, mtd->oobsize);
-+
-+	return 0;
-+}
-+
-+/*
-+ * HW ECC Correction
-+ *
-+ * mtd:        MTD block structure
-+ * dat:        raw data read from the chip
-+ * read_ecc:   ECC from the chip (unused)
-+ * isnull:     unused
-+ *
-+ * Detect and correct a 1 bit error for a page
-+ */
-+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-+		u_char *read_ecc, u_char *isnull)
-+{
-+	struct nand_chip *nand_chip = mtd->priv;
-+	struct at91_nand_host *host = nand_chip->priv;
-+	unsigned int ecc_status;
-+	unsigned int ecc_word, ecc_bit;
-+
-+	/* get the status from the Status Register */
-+	ecc_status = ecc_readl(host->ecc, AT91_ECC_SR);
-+
-+	/* if there's no error */
-+	if (likely(!(ecc_status & AT91_ECC_RECERR)))
-+		return 0;
-+
-+	/* get error bit offset (4 bits) */
-+	ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR;
-+	/* get word address (12 bits) */
-+	ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR;
-+	ecc_word >>= 4;
-+
-+	/* if there are multiple errors */
-+	if (ecc_status & AT91_ECC_MULERR) {
-+		/* Check if it is a freshly erased block (filled with 0xff) */
-+		if ((ecc_bit == AT91_ECC_BITADDR)
-+				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-+			/* the block has just been erased, return OK */
-+			return 0;
-+		}
-+		/*
-+		 * It doesn't seems to be a freshly-erased block.
-+		 * We can't correct so many errors.
-+		 */
-+		dev_dbg(host->dev, "at91_nand : multiple errors detected."
-+				" Unable to correct.\n");
-+		return -EIO;
-+	}
-+
-+	/* if there's a single bit error : we can correct it */
-+	if (ecc_status & AT91_ECC_ECCERR) {
-+		/*
-+		 * There's nothing much to do here.
-+		 * The bit error is on the ECC itself.
-+		 */
-+		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-+				" Nothing to correct\n");
-+		return 0;
-+	}
-+
-+	dev_dbg(host->dev, "at91_nand : one bit error on data."
-+			" (word offset in the page :"
-+			" 0x%x bit offset : 0x%x)\n",
-+			ecc_word, ecc_bit);
-+	/* correct the error */
-+	if (nand_chip->options & NAND_BUSWIDTH_16) {
-+		/* 16 bits words */
-+		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-+	} else {
-+		/* 8 bits words */
-+		dat[ecc_word] ^= (1 << ecc_bit);
-+	}
-+	dev_dbg(host->dev, "at91_nand : error corrected\n");
-+	return 1;
-+}
-+
-+/*
-+ * Enable HW ECC : unsused
-+ */
-+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-+
-+/*
-+ * Over-ride the standard functions with our optimized versions.
-+ * We can use read/write blocks to move data to/from the controller.
-+ */
-+static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-+}
-+
-+static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-+}
-+
-+static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-+}
-+
-+static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+	struct nand_chip	*nand_chip = mtd->priv;
-+
-+	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-+}
-+
-+
- #ifdef CONFIG_MTD_PARTITIONS
--const char *part_probes[] = { "cmdlinepart", NULL };
-+static const char *part_probes[] = { "cmdlinepart", NULL };
- #endif
- 
-+static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" };
-+
- /*
-  * Probe for the NAND device.
-  */
-@@ -94,6 +392,8 @@ static int __init at91_nand_probe(struct
- 	struct at91_nand_host *host;
- 	struct mtd_info *mtd;
- 	struct nand_chip *nand_chip;
-+	struct resource *regs;
-+	struct resource *mem;
- 	int res;
- 
- #ifdef CONFIG_MTD_PARTITIONS
-@@ -108,8 +408,13 @@ static int __init at91_nand_probe(struct
- 		return -ENOMEM;
- 	}
- 
--	host->io_base = ioremap(pdev->resource[0].start,
--				pdev->resource[0].end - pdev->resource[0].start + 1);
-+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!mem) {
-+		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-+		return -ENXIO;
-+	}
-+
-+	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
- 	if (host->io_base == NULL) {
- 		printk(KERN_ERR "at91_nand: ioremap failed\n");
- 		kfree(host);
-@@ -119,6 +424,7 @@ static int __init at91_nand_probe(struct
- 	mtd = &host->mtd;
- 	nand_chip = &host->nand_chip;
- 	host->board = pdev->dev.platform_data;
-+	host->dev = &pdev->dev;
- 
- 	nand_chip->priv = host;		/* link the private data structures */
- 	mtd->priv = nand_chip;
-@@ -132,11 +438,40 @@ static int __init at91_nand_probe(struct
- 	if (host->board->rdy_pin)
- 		nand_chip->dev_ready = at91_nand_device_ready;
- 
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (!regs && hard_ecc) {
-+		printk(KERN_ERR "at91_nand: can't get I/O resource "
-+				"regs\nFalling back on software ECC\n");
-+	}
-+
- 	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-+	if (no_ecc)
-+		nand_chip->ecc.mode = NAND_ECC_NONE;
-+	if (hard_ecc && regs) {
-+		host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
-+		host->ecc += regs->start;
-+
-+		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;	/* HW SYNDROME ECC */
-+		nand_chip->ecc.calculate = at91_nand_calculate;	/* function called after a write */
-+		nand_chip->ecc.correct = at91_nand_correct;	/* function called after a read */
-+		nand_chip->ecc.hwctl = at91_nand_hwctl;		/* unused */
-+		nand_chip->ecc.read_page = at91_nand_read_page;	/* read page function */
-+		nand_chip->ecc.bytes = 4;			/* 4 ECC bytes for any page size */
-+		nand_chip->ecc.prepad = 0;
-+		nand_chip->ecc.postpad = 0;
-+	}
-+
- 	nand_chip->chip_delay = 20;		/* 20us command delay time */
- 
--	if (host->board->bus_width_16)		/* 16-bit bus width */
-+	if (host->board->bus_width_16) {	/* 16-bit bus width */
- 		nand_chip->options |= NAND_BUSWIDTH_16;
-+		nand_chip->read_buf = at91_read_buf16;
-+		nand_chip->write_buf = at91_write_buf16;
-+	}
-+	else {
-+		nand_chip->read_buf = at91_read_buf8;
-+		nand_chip->write_buf = at91_write_buf8;
-+	}
- 
- 	platform_set_drvdata(pdev, host);
- 	at91_nand_enable(host);
-@@ -149,8 +484,60 @@ static int __init at91_nand_probe(struct
- 		}
- 	}
- 
--	/* Scan to find existance of the device */
--	if (nand_scan(mtd, 1)) {
-+	/* first scan to find the device and get the page size */
-+	if (nand_scan_ident(mtd, 1)) {
-+		res = -ENXIO;
-+		goto out;
-+	}
-+
-+	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-+		/* ECC is calculated for the whole page (1 step) */
-+		nand_chip->ecc.size = mtd->writesize;
-+
-+		/* set ECC page size and oob layout */
-+		switch (mtd->writesize) {
-+		case 512:
-+			nand_chip->ecc.layout = &at91_oobinfo_small;
-+			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-+			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-+			ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528);
-+			break;
-+		case 1024:
-+			nand_chip->ecc.layout = &at91_oobinfo_large;
-+			ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056);
-+			break;
-+		case 2048:
-+			nand_chip->ecc.layout = &at91_oobinfo_large;
-+			ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112);
-+			break;
-+		case 4096:
-+			nand_chip->ecc.layout = &at91_oobinfo_large;
-+			ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224);
-+			break;
-+		default:
-+			/*
-+			 * Page size not supported by HW ECC.
-+			 * So switch back to soft ECC
-+			 */
-+			nand_chip->ecc.mode = NAND_ECC_SOFT;
-+			nand_chip->ecc.calculate = NULL;
-+			nand_chip->ecc.correct = NULL;
-+			nand_chip->ecc.hwctl = NULL;
-+			nand_chip->ecc.read_page = NULL;
-+			nand_chip->ecc.postpad = 0;
-+			nand_chip->ecc.prepad = 0;
-+			nand_chip->ecc.bytes = 0;
-+			break;
-+		}
-+	}
-+
-+	printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n",
-+		(nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+		ecc_modes[nand_chip->ecc.mode]
-+	);
-+
-+	/* second phase scan */
-+	if (nand_scan_tail(mtd)) {
- 		res = -ENXIO;
- 		goto out;
- 	}
-@@ -179,8 +566,11 @@ static int __init at91_nand_probe(struct
- 	if (!res)
- 		return res;
- 
-+#ifdef CONFIG_MTD_PARTITIONS
- release:
-+#endif
- 	nand_release(mtd);
-+
- out:
- 	at91_nand_disable(host);
- 	platform_set_drvdata(pdev, NULL);
-@@ -192,7 +582,7 @@ out:
- /*
-  * Remove a NAND device.
-  */
--static int __devexit at91_nand_remove(struct platform_device *pdev)
-+static int __exit at91_nand_remove(struct platform_device *pdev)
- {
- 	struct at91_nand_host *host = platform_get_drvdata(pdev);
- 	struct mtd_info *mtd = &host->mtd;
-@@ -208,8 +598,7 @@ static int __devexit at91_nand_remove(st
- }
- 
- static struct platform_driver at91_nand_driver = {
--	.probe		= at91_nand_probe,
--	.remove		= at91_nand_remove,
-+	.remove		= __exit_p(at91_nand_remove),
- 	.driver		= {
- 		.name	= "at91_nand",
- 		.owner	= THIS_MODULE,
-@@ -218,7 +607,7 @@ static struct platform_driver at91_nand_
- 
- static int __init at91_nand_init(void)
- {
--	return platform_driver_register(&at91_nand_driver);
-+	return platform_driver_probe(&at91_nand_driver, at91_nand_probe);
- }
- 
- 
-@@ -233,4 +622,4 @@ module_exit(at91_nand_exit);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Rick Bronson");
--MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
-+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
---- a/drivers/net/arm/Kconfig
-+++ b/drivers/net/arm/Kconfig
-@@ -47,3 +47,10 @@ config EP93XX_ETH
- 	help
- 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
- 	  Say Y if you are building a kernel for EP93xx based devices.
-+
-+config ARM_KS8695_ETHER
-+	tristate "KS8695 Ethernet support"
-+	depends on NET_ETHERNET && ARM && ARCH_KS8695
-+	help
-+	  If you wish to compile a kernel for an KS8695-based board
-+	  and enable Ethernet support, then select this option.
---- a/drivers/net/arm/Makefile
-+++ b/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
- obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
- obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
- obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
-+obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695_ether.o
---- a/drivers/net/arm/at91_ether.c
-+++ b/drivers/net/arm/at91_ether.c
-@@ -220,7 +220,7 @@ static irqreturn_t at91ether_phy_interru
- 		if (!(phy & (1 << 0)))
- 			goto done;
- 	}
--	else if (lp->phy_type == MII_KS8721_ID) {
-+	else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {
- 		read_phy(lp->phy_address, MII_TPISTATUS, &phy);		/* ack interrupt in Micrel PHY */
- 		if (!(phy & ((1 << 2) | 1)))
- 			goto done;
-@@ -286,7 +286,7 @@ static void enable_phyirq(struct net_dev
- 		dsintr = (1 << 15) | ( 1 << 14);
- 		write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- 	}
--	else if (lp->phy_type == MII_KS8721_ID) {	/* for Micrel PHY */
-+	else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {	/* for Micrel PHY */
- 		dsintr = (1 << 10) | ( 1 << 8);
- 		write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- 	}
-@@ -341,7 +341,7 @@ static void disable_phyirq(struct net_de
- 		dsintr = ~(1 << 14);
- 		write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- 	}
--	else if (lp->phy_type == MII_KS8721_ID) {	/* for Micrel PHY */
-+	else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {	/* for Micrel PHY */
- 		read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
- 		dsintr = ~((1 << 10) | (1 << 8));
- 		write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
-@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff *
- 		lp->skb = skb;
- 		lp->skb_length = skb->len;
- 		lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
--		lp->stats.tx_bytes += skb->len;
-+		dev->stats.tx_bytes += skb->len;
- 
- 		/* Set address of the data in the Transmit Address register */
- 		at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
-@@ -843,34 +843,32 @@ static int at91ether_tx(struct sk_buff *
-  */
- static struct net_device_stats *at91ether_stats(struct net_device *dev)
- {
--	struct at91_private *lp = netdev_priv(dev);
--	int ale, lenerr, seqe, lcol, ecol;
-+	int ale, lenerr, seqe, ecol;
- 
- 	if (netif_running(dev)) {
--		lp->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
-+		dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
- 		ale = at91_emac_read(AT91_EMAC_ALE);
--		lp->stats.rx_frame_errors += ale;				/* Alignment errors */
-+		dev->stats.rx_frame_errors += ale;				/* Alignment errors */
- 		lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
--		lp->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
-+		dev->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
- 		seqe = at91_emac_read(AT91_EMAC_SEQE);
--		lp->stats.rx_crc_errors += seqe;				/* CRC error */
--		lp->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
--		lp->stats.rx_errors += (ale + lenerr + seqe
-+		dev->stats.rx_crc_errors += seqe;				/* CRC error */
-+		dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
-+		dev->stats.rx_errors += (ale + lenerr + seqe
- 			+ at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
- 
--		lp->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
--		lp->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
--		lp->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
--		lp->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
-+		dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
-+		dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
-+		dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
-+		dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
- 
--		lcol = at91_emac_read(AT91_EMAC_LCOL);
-+		dev->stats.tx_window_errors += at91_emac_read(AT91_EMAC_LCOL);	/* Late collisions */
- 		ecol = at91_emac_read(AT91_EMAC_ECOL);
--		lp->stats.tx_window_errors += lcol;			/* Late collisions */
--		lp->stats.tx_aborted_errors += ecol;			/* 16 collisions */
-+		dev->stats.tx_aborted_errors += ecol;				/* 16 collisions */
- 
--		lp->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
-+		dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + ecol);
- 	}
--	return &lp->stats;
-+	return &dev->stats;
- }
- 
- /*
-@@ -896,16 +894,16 @@ static void at91ether_rx(struct net_devi
- 
- 			skb->protocol = eth_type_trans(skb, dev);
- 			dev->last_rx = jiffies;
--			lp->stats.rx_bytes += pktlen;
-+			dev->stats.rx_bytes += pktlen;
- 			netif_rx(skb);
- 		}
- 		else {
--			lp->stats.rx_dropped += 1;
-+			dev->stats.rx_dropped += 1;
- 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- 		}
- 
- 		if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
--			lp->stats.multicast++;
-+			dev->stats.multicast++;
- 
- 		dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE;	/* reset ownership bit */
- 		if (lp->rxBuffIndex == MAX_RX_DESCR-1)				/* wrap after last buffer */
-@@ -934,7 +932,7 @@ static irqreturn_t at91ether_interrupt(i
- 	if (intstatus & AT91_EMAC_TCOM) {	/* Transmit complete */
- 		/* The TCOM bit is set even if the transmission failed. */
- 		if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
--			lp->stats.tx_errors += 1;
-+			dev->stats.tx_errors += 1;
- 
- 		if (lp->skb) {
- 			dev_kfree_skb_irq(lp->skb);
-@@ -978,15 +976,22 @@ static int __init at91ether_setup(unsign
- 	struct net_device *dev;
- 	struct at91_private *lp;
- 	unsigned int val;
--	int res;
-+	struct resource *res;
-+	int ret;
- 	DECLARE_MAC_BUF(mac);
- 
- 	dev = alloc_etherdev(sizeof(struct at91_private));
- 	if (!dev)
- 		return -ENOMEM;
- 
--	dev->base_addr = AT91_VA_BASE_EMAC;
--	dev->irq = AT91RM9200_ID_EMAC;
-+	/* Get I/O base address and IRQ */
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		free_netdev(dev);
-+		return -ENODEV;
-+	}
-+	dev->base_addr = res->start;
-+	dev->irq = platform_get_irq(pdev, 0);
- 
- 	/* Install the interrupt handler */
- 	if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
-@@ -1043,7 +1048,9 @@ static int __init at91ether_setup(unsign
- 	} else if (machine_is_csb337()) {
- 		/* mix link activity status into LED2 link state */
- 		write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
--	}
-+	} else if (machine_is_ecbat91())
-+		write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
-+
- 	disable_mdi();
- 	spin_unlock_irq(&lp->lock);
- 
-@@ -1058,12 +1065,12 @@ static int __init at91ether_setup(unsign
- 	lp->phy_address = phy_address;	/* MDI address of PHY */
- 
- 	/* Register the network interface */
--	res = register_netdev(dev);
--	if (res) {
-+	ret = register_netdev(dev);
-+	if (ret) {
- 		free_irq(dev->irq, dev);
- 		free_netdev(dev);
- 		dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
--		return res;
-+		return ret;
- 	}
- 
- 	/* Determine current link speed */
-@@ -1101,6 +1108,8 @@ static int __init at91ether_setup(unsign
- 		printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- 	else if (phy_type == MII_AC101L_ID)
- 		printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
-+	else if (phy_type == MII_KSZ8041_ID)
-+		printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name);
- 	else if (phy_type == MII_KS8721_ID)
- 		printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- 	else if (phy_type == MII_T78Q21x3_ID)
-@@ -1146,6 +1155,7 @@ static int __init at91ether_probe(struct
- 			case MII_DP83847_ID:		/* National Semiconductor DP83847:  */
- 			case MII_DP83848_ID:		/* National Semiconductor DP83848:  */
- 			case MII_AC101L_ID:		/* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
-+			case MII_KSZ8041_ID:		/* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */
- 			case MII_KS8721_ID:		/* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- 			case MII_T78Q21x3_ID:		/* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- 			case MII_LAN83C185_ID:		/* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
-@@ -1246,3 +1256,4 @@ module_exit(at91ether_exit)
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
- MODULE_AUTHOR("Andrew Victor");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/net/arm/at91_ether.h
-+++ b/drivers/net/arm/at91_ether.h
-@@ -48,6 +48,9 @@
- /* Altima AC101L PHY */
- #define MII_AC101L_ID		0x00225520
- 
-+/* Micrel KSZ8041 PHY */
-+#define MII_KSZ8041_ID		0x00221510
-+
- /* Micrel KS8721 PHY */
- #define MII_KS8721_ID		0x00221610
- 
-@@ -84,7 +87,6 @@ struct recv_desc_bufs
- 
- struct at91_private
- {
--	struct net_device_stats stats;
- 	struct mii_if_info mii;			/* ethtool support */
- 	struct at91_eth_data board_data;	/* board-specific configuration */
- 	struct clk *ether_clk;			/* clock */
---- /dev/null
-+++ b/drivers/net/arm/ks8695_ether.c
-@@ -0,0 +1,1009 @@
-+/*
-+ * Ethernet driver for the Kendin/Micrel KS8695.
-+ *
-+ * Copyright (C) 2006 Andrew Victor
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/mii.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/mach/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/arch/regs-wan.h>
-+#include <asm/arch/regs-lan.h>
-+#include <asm/arch/regs-hpna.h>
-+#include <asm/arch/regs-switch.h>
-+#include <asm/arch/regs-misc.h>
-+
-+#include <asm/arch/regs-irq.h>
-+
-+#include "ks8695_ether.h"
-+
-+
-+#define DRV_NAME	"ks8695_ether"
-+#define DRV_VERSION	"0.01"
-+
-+/* ..................................................................... */
-+
-+static inline unsigned long ks8695_read(struct net_device *dev, unsigned int reg)
-+{
-+	return __raw_readl(dev->base_addr + reg);
-+}
-+
-+static inline void ks8695_write(struct net_device *dev, unsigned int reg, unsigned long value)
-+{
-+	__raw_writel(value, dev->base_addr + reg);
-+}
-+
-+
-+/* ......................... ADDRESS MANAGEMENT ........................ */
-+
-+#define KS8695_NR_ADDRESSES	16
-+
-+/*
-+ * Add the specified multicast addresses to the Additional Station
-+ * Address registers.
-+ */
-+static void ks8695_set_mcast_address(struct net_device *dev, struct dev_mc_list *addr, int nr_addr)
-+{
-+	unsigned long low, high;
-+	int i;
-+
-+	/* Set multicast addresses in Additional Station Address registers */
-+	for (i = 0; i < nr_addr; i++, addr = addr->next) {
-+		if (!addr) break;				/* unexpected end of list */
-+		else if (i == KS8695_NR_ADDRESSES) break;	/* too many addresses */
-+
-+		low = (addr->dmi_addr[2] << 24) | (addr->dmi_addr[3] << 16) | (addr->dmi_addr[4] << 8) | (addr->dmi_addr[5]);
-+		high = (addr->dmi_addr[0] << 8) | (addr->dmi_addr[1]);
-+
-+		ks8695_write(dev, KS8695_WMAAL_(i), low);
-+		ks8695_write(dev, KS8695_WMAAH_(i), WMAAH_E | high);
-+	}
-+
-+	/* Clear the remaining Additional Station Addresses */
-+	for (; i < KS8695_NR_ADDRESSES; i++) {
-+		ks8695_write(dev, KS8695_WMAAL_(i), 0);
-+		ks8695_write(dev, KS8695_WMAAH_(i), 0);
-+	}
-+}
-+
-+/*
-+ * Enable/Disable promiscuous and multicast modes.
-+ */
-+static void ks8695eth_set_multi(struct net_device *dev)
-+{
-+	unsigned long ctrl;
-+
-+	ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+
-+	if (dev->flags & IFF_PROMISC)			/* enable promiscuous mode */
-+		ctrl |= WMDRXC_WMRA;
-+	else if (dev->flags & ~IFF_PROMISC)		/* disable promiscuous mode */
-+		ctrl &= ~WMDRXC_WMRA;
-+
-+	if (dev->flags & IFF_ALLMULTI)			/* enable all multicast mode */
-+		ctrl |= WMDRXC_WMRM;
-+	else if (dev->mc_count > KS8695_NR_ADDRESSES)	/* more specific multicast addresses than can be handled in hardware */
-+		ctrl |= WMDRXC_WMRM;
-+	else if (dev->mc_count > 0) {			/* enable specific multicasts */
-+		ctrl &= ~WMDRXC_WMRM;
-+		ks8695_set_mcast_address(dev, dev->mc_list, dev->mc_count);
-+	}
-+	else if (dev->flags & ~IFF_ALLMULTI) {		/* disable multicast mode */
-+		ctrl &= ~WMDRXC_WMRM;
-+		ks8695_set_mcast_address(dev, NULL, 0);
-+	}
-+
-+	ks8695_write(dev, KS8695_WMDRXC, ctrl);
-+}
-+
-+/*
-+ * Program the hardware MAC address from dev->dev_addr.
-+ */
-+static void update_mac_address(struct net_device *dev)
-+{
-+	unsigned long low, high;
-+
-+	low = (dev->dev_addr[2] << 24) | (dev->dev_addr[3] << 16) | (dev->dev_addr[4] << 8) | (dev->dev_addr[5]);
-+	high = (dev->dev_addr[0] << 8) | (dev->dev_addr[1]);
-+
-+	ks8695_write(dev, KS8695_WMAL, low);
-+	ks8695_write(dev, KS8695_WMAH, high);
-+}
-+
-+/*
-+ * Store the new hardware address in dev->dev_addr, and update the MAC.
-+ */
-+static int ks8695eth_set_mac(struct net_device *dev, void* addr)
-+{
-+	struct sockaddr *address = addr;
-+	DECLARE_MAC_BUF(mac);
-+
-+	if (!is_valid_ether_addr(address->sa_data))
-+		return -EADDRNOTAVAIL;
-+
-+	memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
-+	update_mac_address(dev);
-+
-+	printk("%s: Setting MAC address to %s\n", dev->name, print_mac(mac, dev->dev_addr));
-+
-+	return 0;
-+}
-+
-+/*
-+ * Retrieve the MAC address set by the bootloader.
-+ */
-+static void __init get_mac_address(struct net_device *dev)
-+{
-+	unsigned char addr[6];
-+	unsigned long low, high;
-+
-+	low = ks8695_read(dev, KS8695_WMAL);
-+	high = ks8695_read(dev, KS8695_WMAH);
-+
-+	addr[0] = (high & 0xff00) >> 8;
-+	addr[1] = (high & 0xff);
-+	addr[2] = (low & 0xff000000) >> 24;
-+	addr[3] = (low & 0xff0000) >> 16;
-+	addr[4] = (low & 0xff00) >> 8;
-+	addr[5] = (low & 0xff);
-+
-+	if (is_valid_ether_addr(addr))
-+		memcpy(dev->dev_addr, &addr, 6);
-+}
-+
-+
-+/* ......................... ETHTOOL SUPPORT ........................... */
-+
-+/*
-+ * Get device-specific settings.
-+ */
-+static int ks8695eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	unsigned long ctrl;
-+
-+	/* the defaults for all ports */
-+	cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
-+			| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
-+			| SUPPORTED_TP | SUPPORTED_MII;
-+	cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-+	cmd->port = PORT_MII;
-+	cmd->transceiver = XCVR_INTERNAL;
-+
-+	if (dev->base_addr == KS8695_HPNA_VA) {
-+		cmd->phy_address = 0;
-+		cmd->autoneg = AUTONEG_DISABLE;		/* not supported for HPNA */
-+
-+		ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
-+		cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10;
-+		cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF;
-+	}
-+	else if (dev->base_addr == KS8695_WAN_VA) {
-+		cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
-+		cmd->phy_address = 0;
-+
-+		ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+		if ((ctrl & WMC_WAND) == 0) {		/* auto-negotiation is enabled */
-+			cmd->advertising |= ADVERTISED_Autoneg;
-+			if (ctrl & WMC_WANA100F)
-+				cmd->advertising |= ADVERTISED_100baseT_Full;
-+			if (ctrl & WMC_WANA100H)
-+				cmd->advertising |= ADVERTISED_100baseT_Half;
-+			if (ctrl & WMC_WANA10F)
-+				cmd->advertising |= ADVERTISED_10baseT_Full;
-+			if (ctrl & WMC_WANA10H)
-+				cmd->advertising |= ADVERTISED_10baseT_Half;
-+			if (ctrl & WMC_WANAP)
-+				cmd->advertising |= ADVERTISED_Pause;
-+			cmd->autoneg = AUTONEG_ENABLE;
-+
-+			cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
-+			cmd->duplex = (ctrl & WMC_WDS) ? DUPLEX_FULL : DUPLEX_HALF;
-+		}
-+		else {					/* auto-negotiation is disabled */
-+			cmd->autoneg = AUTONEG_DISABLE;
-+
-+			cmd->speed = (ctrl & WMC_WANF100) ? SPEED_100 : SPEED_10;
-+			cmd->duplex = (ctrl & WMC_WANFF) ? DUPLEX_FULL : DUPLEX_HALF;
-+		}
-+	}
-+	else if (dev->base_addr == KS8695_LAN_VA) {
-+		// TODO: Implement for Switch ports
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Set device-specific settings.
-+ */
-+static int ks8695eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	unsigned long ctrl;
-+
-+	if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100))
-+		return -EINVAL;
-+	if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL))
-+		return -EINVAL;
-+	if (cmd->port != PORT_MII)
-+		return -EINVAL;
-+	if (cmd->transceiver != XCVR_INTERNAL)
-+		return -EINVAL;
-+	if ((cmd->autoneg != AUTONEG_DISABLE) && (cmd->autoneg != AUTONEG_ENABLE))
-+		return -EINVAL;
-+
-+	if (cmd->autoneg == AUTONEG_ENABLE) {
-+		if ((cmd->advertising & (ADVERTISED_10baseT_Half |
-+				ADVERTISED_10baseT_Full |
-+				ADVERTISED_100baseT_Half |
-+				ADVERTISED_100baseT_Full)) == 0)
-+			return -EINVAL;
-+
-+		if (dev->base_addr == KS8695_HPNA_VA)
-+			return -EINVAL;		/* HPNA does not support auto-negotiation. */
-+		else if (dev->base_addr == KS8695_WAN_VA) {
-+			ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+			ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H);
-+			if (cmd->advertising & ADVERTISED_100baseT_Full)
-+				ctrl |= WMC_WANA100F;
-+			if (cmd->advertising & ADVERTISED_100baseT_Half)
-+				ctrl |= WMC_WANA100H;
-+			if (cmd->advertising & ADVERTISED_10baseT_Full)
-+				ctrl |= WMC_WANA10F;
-+			if (cmd->advertising & ADVERTISED_10baseT_Half)
-+				ctrl |= WMC_WANA10H;
-+
-+			ctrl |= WMC_WANR;	/* force a re-negotiation */
-+			__raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+		}
-+		else if (dev->base_addr == KS8695_LAN_VA) {
-+			// TODO: Implement for Switch ports
-+		}
-+
-+	}
-+	else {
-+		if (dev->base_addr == KS8695_HPNA_VA) {
-+			ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
-+
-+			ctrl &= ~(HMC_HSS | HMC_HDS);
-+			if (cmd->speed == SPEED_100)
-+				ctrl |= HMC_HSS;
-+			if (cmd->duplex == DUPLEX_FULL)
-+				ctrl |= HMC_HDS;
-+
-+			__raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC);
-+		}
-+		else if (dev->base_addr == KS8695_WAN_VA) {
-+			ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+			ctrl |= WMC_WAND;	/* disable auto-negotiation */
-+			ctrl &= ~(WMC_WANF100 | WMC_WANFF);
-+			if (cmd->speed == SPEED_100)
-+				ctrl |= WMC_WANF100;
-+			if (cmd->duplex == DUPLEX_FULL)
-+				ctrl |= WMC_WANFF;
-+
-+			__raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+		}
-+		else if (dev->base_addr == KS8695_LAN_VA) {
-+			// TODO: Implement for Switch ports
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Restart the auto-negotiation.
-+ */
-+static int ks8695eth_nwayreset(struct net_device *dev)
-+{
-+	unsigned long ctrl;
-+
-+	if (dev->base_addr == KS8695_HPNA_VA)	/* HPNA has no auto-negotiation */
-+		return -EINVAL;
-+	else if (dev->base_addr == KS8695_WAN_VA) {
-+		ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+		if ((ctrl & WMC_WAND) == 0)
-+			__raw_writel(ctrl | WMC_WANR, KS8695_MISC_VA + KS8695_WMC);
-+		else
-+			return -EINVAL;		/* auto-negitiation not enabled */
-+	}
-+	else if (dev->base_addr == KS8695_LAN_VA) {
-+		// TODO: Implement for Switch ports
-+	}
-+
-+	return 0;
-+}
-+
-+static void ks8695eth_get_pause(struct net_device *dev, struct ethtool_pauseparam *param)
-+{
-+	unsigned long ctrl;
-+
-+	if (dev->base_addr == KS8695_HPNA_VA)
-+		return;
-+	else if (dev->base_addr == KS8695_WAN_VA) {
-+		ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);	/* advertise Pause */
-+		param->autoneg = (ctrl & WMC_WANAP);
-+
-+		ctrl = ks8695_read(dev, KS8695_WMDRXC);			/* current Tx Flow-control */
-+		param->rx_pause = (ctrl & WMDRXC_WMRFCE);
-+
-+		ctrl = ks8695_read(dev, KS8695_WMDRXC);			/* current Rx Flow-control */
-+		param->tx_pause = (ctrl & WMDTXC_WMTFCE);
-+	}
-+	else if (dev->base_addr == KS8695_LAN_VA) {
-+		// TODO: Implement for Switch ports
-+	}
-+}
-+
-+static int ks8695eth_set_pause(struct net_device *dev, struct ethtool_pauseparam *param)
-+{
-+	// TODO.
-+
-+	return 0;
-+}
-+
-+static u32 ks8695eth_get_link(struct net_device *dev)
-+{
-+	unsigned long ctrl;
-+
-+	if (dev->base_addr == KS8695_HPNA_VA)
-+		return 1;		/* HPNA always has link */
-+	else if (dev->base_addr == KS8695_WAN_VA) {
-+		ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+		return (ctrl & WMC_WLS);
-+	}
-+	else if (dev->base_addr == KS8695_LAN_VA) {
-+		// TODO: Implement for Switch ports
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Report driver information.
-+ */
-+static void ks8695eth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
-+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-+	strlcpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
-+}
-+
-+static struct ethtool_ops ks8695eth_ethtool_ops = {
-+	.get_settings	= ks8695eth_get_settings,
-+	.set_settings	= ks8695eth_set_settings,
-+	.get_drvinfo	= ks8695eth_get_drvinfo,
-+	.nway_reset	= ks8695eth_nwayreset,
-+	.get_pauseparam = ks8695eth_get_pause,
-+	.set_pauseparam = ks8695eth_set_pause,
-+	.get_link	= ks8695eth_get_link,
-+};
-+
-+
-+/* ................................ MAC ................................ */
-+
-+/*
-+ * Setup the RX DMA descriptors, and enable and start the DMA receiver.
-+ */
-+static void ks8695eth_start_rx(struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	unsigned long ctrl;
-+	int i;
-+
-+	/* Setup the DMA descriptors */
-+	for (i = 0; i < MAX_RX_DESC; i++) {
-+		lp->rxdma[i].length = MAX_RXBUF_SIZE;
-+		lp->rxdma[i].addr = (unsigned long) lp->rxSkb[i].dma;
-+		lp->rxdma[i].next = (unsigned long) lp->rxdma_phys + (sizeof(struct rx_descriptor) * (i+1));
-+		lp->rxdma[i].status = RDES_OWN;
-+	}
-+
-+	/* Create ring of DMA descriptors */
-+	lp->rxdma[MAX_RX_DESC-1].next = (unsigned long) lp->rxdma_phys;		/* phys address of 1st descriptor */
-+
-+	/* Reset receive index (since hardware was reset) */
-+	lp->rx_idx = 0;
-+
-+	/* Program address of 1st descriptor in KS8695 */
-+	ks8695_write(dev, KS8695_WRDLB, (unsigned long) lp->rxdma_phys);
-+
-+	/* Enable and start the DMA Receiver */
-+	ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+	ks8695_write(dev, KS8695_WMDRXC, ctrl | WMDRXC_WMRE);
-+	ks8695_write(dev, KS8695_WMDRSC, 0);
-+}
-+
-+/*
-+ * Stop the DMA receiver.
-+ */
-+static void ks8695eth_stop_rx(struct net_device *dev)
-+{
-+	unsigned long ctrl;
-+
-+	/* Disable receive DMA */
-+	ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+	ks8695_write(dev, KS8695_WMDRXC, ctrl & ~WMDRXC_WMRE);
-+}
-+
-+/*
-+ * Setup the TX DMA descriptors, and enable DMA transmitter.
-+ */
-+static void ks8695eth_start_tx(struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	unsigned long ctrl;
-+	int i;
-+
-+	/* Setup the DMA descriptors */
-+	for (i = 0; i < MAX_TX_DESC; i++) {
-+		lp->txdma[i].ownership = 0;
-+		lp->txdma[i].status = 0;
-+		lp->txdma[i].addr = 0;
-+		lp->txdma[i].next = (unsigned long) lp->txdma_phys + (sizeof(struct tx_descriptor) * (i+1));
-+	}
-+
-+	/* Create ring of DMA descriptors */
-+	lp->txdma[MAX_TX_DESC-1].next = (unsigned long) lp->txdma_phys;		/* phys address of 1st desc */
-+
-+	/* Reset transmit indexes (since hardware was reset) */
-+	lp->tx_head = 0;
-+	lp->tx_tail = 0;
-+
-+	/* Program address of 1st descriptor in KS8695 */
-+	ks8695_write(dev, KS8695_WTDLB, (unsigned long) lp->txdma_phys);
-+
-+	/* Enable the DMA transmitter (will be started on first packet) */
-+	ctrl = ks8695_read(dev, KS8695_WMDTXC);
-+	ks8695_write(dev, KS8695_WMDTXC, ctrl | WMDTXC_WMTE);
-+}
-+
-+/*
-+ * Stop the DMA transmitter.
-+ */
-+static void ks8695eth_stop_tx(struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	unsigned long ctrl;
-+	int i;
-+
-+	/* Disable transmit DMA */
-+	ctrl = ks8695_read(dev, KS8695_WMDTXC);
-+	ks8695_write(dev, KS8695_WMDTXC, ctrl & ~WMDTXC_WMTE);
-+
-+	/* Clear any pending skb's still on transmit queue */
-+	for (i = 0; i < MAX_TX_DESC; i++) {
-+		lp->txdma[i].ownership = 0;
-+		lp->txdma[i].status = 0;
-+		lp->txdma[i].addr = 0;
-+
-+		if (lp->txSkb[i].skb) {
-+			dma_unmap_single(lp->dev, lp->txSkb[i].dma, lp->txSkb[i].length, DMA_TO_DEVICE);
-+			dev_kfree_skb_irq(lp->txSkb[i].skb);
-+			lp->txSkb[i].skb = NULL;
-+		}
-+	}
-+}
-+
-+/*
-+ * Reset the MAC hardware.
-+ */
-+static void ks8695eth_hw_reset(struct net_device *dev)
-+{
-+	/* Perform hardware reset */
-+	ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTRST);
-+	while (ks8695_read(dev, KS8695_WMDTXC) & WMDTXC_WMTRST) { barrier(); }
-+
-+	/* Initialize the hardware */
-+	ks8695_write(dev, KS8695_WMDRXC, WMDRXC_WMRU | WMDRXC_WMRB);		/* RX: receive Unicast & Broadcast */
-+	ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTEP | WMDTXC_WMTAC);		/* TX: add Padding & CRC */
-+
-+	// TODO: Can set Rx/Tx PBL: (Micrel using 8)
-+	// TODO: Enable hardware checksumming.
-+	// TODO: Enable Rx/Tx flow-control
-+}
-+
-+/*
-+ * Enable or Disable the IRQs associated with a network interface.
-+ */
-+static void ks8695eth_set_irq(struct net_device *dev, short enable)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	int i;
-+
-+	for (i = 0; i < NR_IRQS; i++) {
-+		if (lp->irqs & (1 << i)) {
-+			if (enable)
-+				enable_irq(i);
-+			else
-+				disable_irq(i);
-+		}
-+	}
-+}
-+
-+/*
-+ * Open the ethernet interface.
-+ */
-+static int ks8695eth_open(struct net_device *dev)
-+{
-+	if (!is_valid_ether_addr(dev->dev_addr))
-+		return -EADDRNOTAVAIL;
-+
-+	/* MUST reset hardware in _open() */
-+	ks8695eth_hw_reset(dev);
-+
-+	/*  Update the MAC address (incase user has changed it) */
-+	update_mac_address(dev);
-+
-+	/* Start DMA */
-+	ks8695eth_start_tx(dev);
-+	ks8695eth_start_rx(dev);
-+
-+	/* Enable interrupts */
-+	ks8695eth_set_irq(dev, 1);
-+
-+	netif_start_queue(dev);
-+	return 0;
-+}
-+
-+/*
-+ * Close the ethernet interface.
-+ */
-+static int ks8695eth_close(struct net_device *dev)
-+{
-+	/* Stop DMA */
-+	ks8695eth_stop_rx(dev);
-+	ks8695eth_stop_tx(dev);
-+
-+	/* Disable interrupts */
-+	ks8695eth_set_irq(dev, 0);
-+
-+	netif_stop_queue(dev);
-+	return 0;
-+}
-+
-+/*
-+ * Return the current statistics.
-+ */
-+static struct net_device_stats *ks8695eth_stats(struct net_device *dev)
-+{
-+	return &dev->stats;
-+}
-+
-+/*
-+ * Queue a packet for transmission in next TX DMA descriptor.
-+ */
-+static int ks8695eth_xmit_frame(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	int i;
-+
-+	/* Packets are added to head of array */
-+	i = lp->tx_head;
-+
-+	/* Store packet information */
-+	lp->txSkb[i].skb = skb;
-+	lp->txSkb[i].length = skb->len;
-+	lp->txSkb[i].dma = dma_map_single(lp->dev, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+	spin_lock_irq(&lp->tx_lock);
-+
-+	/* Set Tx descriptor information */
-+	lp->txdma[i].addr = lp->txSkb[i].dma;
-+	lp->txdma[i].status = TDES_IC | TDES_FS | TDES_LS | (lp->txSkb[i].length & TDES_TBS);
-+	lp->txdma[i].ownership = TDES_OWN;
-+
-+	/* Start the DMA transmitter (if necessary) */
-+	ks8695_write(dev, KS8695_WMDTSC, 0);
-+
-+	lp->tx_head = (lp->tx_head + 1) % MAX_TX_DESC;
-+	if (lp->tx_head == lp->tx_tail)		/* no more descriptors */
-+		netif_stop_queue(dev);
-+
-+	spin_unlock_irq(&lp->tx_lock);
-+
-+	dev->trans_start = jiffies;
-+	return 0;
-+}
-+
-+/* ..................................................................... */
-+
-+/*
-+ * The link state of the WAN port has changed.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_wan_link(struct net_device *dev)
-+{
-+	unsigned long ctrl;
-+
-+	ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+	if (ctrl & WMC_WLS) {
-+		netif_carrier_on(dev);
-+		printk(KERN_INFO "%s: Link is now %s-%s\n", dev->name,
-+				(ctrl & WMC_WSS) ? "100" : "10",
-+				(ctrl & WMC_WDS) ? "FullDuplex" : "HalfDuplex");
-+	}
-+	else {
-+		netif_carrier_off(dev);
-+		printk(KERN_INFO "%s: Link down.\n", dev->name);
-+	}
-+}
-+
-+/* ..................................................................... */
-+
-+/*
-+ * A frame has been received.  Exteract from buffer descriptor and deliver to
-+ * upper layers.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_rx_interrupt(struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	struct sk_buff *skb;
-+	unsigned long flags;
-+	unsigned int pktlen;
-+
-+	while (!(lp->rxdma[lp->rx_idx].status & RDES_OWN)) {
-+		flags = lp->rxdma[lp->rx_idx].status;
-+
-+		if ((flags & (RDES_FS | RDES_LS)) != (RDES_FS | RDES_LS)) {
-+			printk(KERN_ERR "%s: Spanning packet detected\n", dev->name);
-+			goto rx_complete;
-+		}
-+
-+		/* handle errors */
-+		if (flags & (RDES_ES | RDES_RE)) {
-+			dev->stats.rx_errors++;
-+
-+			if (flags & RDES_TL)		/* Frame too long */
-+				dev->stats.rx_length_errors++;
-+			else if (flags & RDES_RF)	/* Runt frame */
-+				dev->stats.rx_length_errors++;
-+			else if (flags & RDES_CE)	/* CRC error */
-+				dev->stats.rx_crc_errors++;
-+			else if (flags & RDES_RE)	/* MII error */
-+				dev->stats.rx_missed_errors++;
-+			// TODO: If hardware checksumming, then check IP/TCP/UDP errors.
-+
-+			goto rx_complete;
-+		}
-+
-+		pktlen = flags & RDES_FLEN;
-+		pktlen = pktlen - 4;			/* remove CRC */
-+
-+		// OLD CALL: consistent_sync(lp->rxSkb[lp->rx_idx].skb->data, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+		dma_sync_single_for_cpu(lp->dev, lp->rxSkb[lp->rx_idx].dma, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+
-+		skb = dev_alloc_skb(pktlen+2);		/* +2 to align IP header */
-+		if (!skb) {
-+			dev->stats.rx_dropped++;
-+			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+			goto rx_complete;
-+		}
-+
-+		skb_reserve(skb, 2);			/* align IP header */
-+		memcpy(skb_put(skb, pktlen), lp->rxSkb[lp->rx_idx].skb->data, pktlen);
-+
-+		skb->protocol = eth_type_trans(skb, dev);
-+		netif_rx(skb);
-+
-+		/* update statistics */
-+		dev->stats.rx_packets++;
-+		dev->stats.rx_bytes += pktlen;
-+		if (flags & RDES_MF)
-+			dev->stats.multicast++;
-+		dev->last_rx = jiffies;
-+
-+rx_complete:
-+		lp->rxdma[lp->rx_idx].status = RDES_OWN;	/* reset ownership bit */
-+
-+		lp->rx_idx = (lp->rx_idx + 1) % MAX_RX_DESC;	/* next descriptor */
-+	}
-+
-+	/* restart DMA receiver incase it was suspended */
-+	ks8695_write(dev, KS8695_WMDRSC, 0);
-+}
-+
-+/*
-+ * A packet has been transmitted.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_tx_interrupt(struct net_device *dev)
-+{
-+	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+	int i;
-+
-+	/* Packets are removed from tail of array */
-+	i = lp->tx_tail;
-+
-+	// TODO: Loop through multiple times?
-+
-+	if (lp->txSkb[i].skb) {
-+		/* update statistics */
-+		dev->stats.tx_packets++;
-+		dev->stats.tx_bytes += lp->txSkb[i].length;
-+
-+		/* free packet */
-+		dma_unmap_single(lp->dev, lp->txSkb[i].dma, lp->txSkb[i].length, DMA_TO_DEVICE);
-+		dev_kfree_skb_irq(lp->txSkb[i].skb);
-+		lp->txSkb[i].skb = NULL;
-+
-+		/* Not necessary to clear descriptor since we still own it */
-+	}
-+
-+	lp->tx_tail = (lp->tx_tail + 1) % MAX_TX_DESC;
-+
-+	netif_wake_queue(dev);
-+}
-+
-+/*
-+ * MAC interrupt handler
-+ */
-+static irqreturn_t ks8695eth_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *) dev_id;
-+
-+	switch (irq) {
-+		case KS8695_IRQ_LAN_RX_STATUS:
-+		case KS8695_IRQ_HPNA_RX_STATUS:
-+		case KS8695_IRQ_WAN_RX_STATUS:
-+			ks8695eth_rx_interrupt(dev);
-+			return IRQ_HANDLED;
-+
-+		case KS8695_IRQ_LAN_TX_STATUS:
-+		case KS8695_IRQ_HPNA_TX_STATUS:
-+		case KS8695_IRQ_WAN_TX_STATUS:
-+			ks8695eth_tx_interrupt(dev);
-+			return IRQ_HANDLED;
-+
-+		case KS8695_IRQ_WAN_LINK:
-+			ks8695eth_wan_link(dev);
-+			return IRQ_HANDLED;
-+
-+		default:
-+			return IRQ_NONE;
-+	}
-+}
-+
-+
-+/* ..................................................................... */
-+
-+/*
-+ * Initialize the WAN hardware to known defaults.
-+ */
-+static void __init ks8695eth_init_wan(void)
-+{
-+	unsigned long ctrl;
-+
-+	/* Support auto-negotiation */
-+	ctrl = WMC_WANAP | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H;
-+
-+	/* LED0 = Activity , LED1 = Link */
-+	ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK);
-+
-+	/* Restart Auto-negotiation */
-+	ctrl |= WMC_WANR;
-+
-+	__raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+
-+	__raw_writel(0, KS8695_MISC_VA + KS8695_WPPM);
-+	__raw_writel(0, KS8695_MISC_VA + KS8695_PPS);
-+}
-+
-+/*
-+ * Initialize the LAN Switch hardware to known defaults.
-+ */
-+static void __init ks8695eth_init_switch(void)
-+{
-+	unsigned long ctrl;
-+
-+	ctrl = 0x40819e00;		/* default */
-+
-+	/* LED0 = Speed  LED1 = Link/Activity */
-+	ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S);
-+	ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY);
-+
-+	/* Enable Switch */
-+	ctrl |= SEC0_ENABLE;
-+
-+	__raw_writel(ctrl, KS8695_SWITCH_VA + KS8695_SEC0);
-+
-+	__raw_writel(0x9400100, KS8695_SWITCH_VA + KS8695_SEC1);	/* reset defaults */
-+}
-+
-+static int ks8695eth_hook_irqs(struct platform_device *pdev, struct net_device *dev, unsigned long *irqset)
-+{
-+	struct resource *res;
-+	int i = 0, ret;
-+
-+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
-+		set_irq_flags(res->start, IRQF_VALID | IRQF_NOAUTOEN);
-+
-+		ret = request_irq(res->start, ks8695eth_interrupt, IRQF_DISABLED | IRQF_SHARED, res->name, dev);
-+		if (ret) {
-+			printk(KERN_ERR "%s: return_irq %u failed\n", dev->name, res->start);
-+			return -EBUSY;
-+		}
-+
-+		*irqset |= (1 << res->start);
-+
-+		// TODO: Can set different priorities for interrupts [0x  BB AA FF].
-+
-+		i++;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __init ks8695eth_probe(struct platform_device *pdev)
-+{
-+	struct net_device *dev;
-+	struct ks8695eth_priv *lp;
-+	struct resource *res;
-+	int i = 0, ret, size;
-+	DECLARE_MAC_BUF(mac);
-+
-+	/* Create ethernet device */
-+	dev = alloc_etherdev(sizeof(struct ks8695eth_priv));
-+	if (!dev)
-+		return -ENOMEM;
-+
-+	/* Get I/O base address */
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		free_netdev(dev);
-+		return -ENODEV;
-+	}
-+	dev->base_addr = res->start;
-+
-+	lp = (struct ks8695eth_priv *) dev->priv;
-+
-+	/* Retreive MAC address before the MAC registers are reset */
-+	get_mac_address(dev);
-+
-+	/* Reset the hardware */
-+	ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTRST);
-+	while (ks8695_read(dev, KS8695_WMDTXC) & WMDTXC_WMTRST) { barrier(); }
-+
-+	/* Get IRQ's */
-+	dev->irq = platform_get_irq(pdev, 0);
-+	ret = ks8695eth_hook_irqs(pdev, dev, &lp->irqs);
-+	if (ret) {
-+		// Cleanup.
-+	}
-+
-+	/* Allocate DMA-able memory for Tx descriptor */
-+	size = sizeof(struct tx_descriptor) * MAX_TX_DESC;
-+	lp->txdma = dma_alloc_coherent(&pdev->dev, size, &lp->txdma_phys, GFP_KERNEL);
-+	if (lp->txdma == NULL) {
-+		// free IRQs
-+		free_netdev(dev);
-+		return -ENOMEM;
-+	}
-+	memset(lp->txdma, 0, size);
-+	lp->tx_head = 0;
-+	lp->tx_tail = 0;
-+
-+	/* Allocate DMA-able memory for Rx descriptor */
-+	size = sizeof(struct rx_descriptor) * MAX_RX_DESC;
-+	lp->rxdma = dma_alloc_coherent(&pdev->dev, size, &lp->rxdma_phys, GFP_KERNEL);
-+	if (lp->rxdma == NULL) {
-+		// free IRQs
-+		// Free TX descriptor memory.
-+		free_netdev(dev);
-+		return -ENOMEM;
-+	}
-+	memset(lp->rxdma, 0, size);
-+	lp->rx_idx = 0;
-+
-+	/* Allocate DMA-able memory for Rx Data */
-+	for (i = 0; i < MAX_RX_DESC; i++) {
-+		lp->rxSkb[i].skb = alloc_skb(MAX_RXBUF_SIZE, GFP_KERNEL);
-+		if (lp->rxSkb[i].skb == NULL) {
-+			// Cleanup
-+			return -ENOMEM;
-+		}
-+		lp->rxSkb[i].length = MAX_RXBUF_SIZE;
-+		lp->rxSkb[i].dma = dma_map_single(&pdev->dev, lp->rxSkb[i].skb->data, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+	}
-+
-+	spin_lock_init(&lp->tx_lock);
-+
-+	platform_set_drvdata(pdev, dev);
-+
-+	ether_setup(dev);
-+	dev->open		= ks8695eth_open;
-+	dev->stop		= ks8695eth_close;
-+	dev->hard_start_xmit	= ks8695eth_xmit_frame;
-+	dev->get_stats		= ks8695eth_stats;
-+	dev->set_multicast_list	= ks8695eth_set_multi;
-+	dev->set_mac_address	= ks8695eth_set_mac;
-+	dev->ethtool_ops	= &ks8695eth_ethtool_ops;
-+
-+	SET_NETDEV_DEV(dev, &pdev->dev);
-+	lp->dev = &pdev->dev;
-+
-+	if (dev->base_addr == KS8695_WAN_VA)
-+		ks8695eth_init_wan();
-+	else if (dev->base_addr == KS8695_LAN_VA)
-+		ks8695eth_init_switch();
-+
-+	/* Register the network interface */
-+	ret = register_netdev(dev);
-+	if (ret) {
-+		// free IRQs
-+		free_netdev(dev);
-+//		dma_free_coherent(&pdev->dev, sizeof(struct ks8695_tx_dma), lp->txdma, lp->txdma_phys);
-+//		dma_free_coherent(&pdev->dev, sizeof(struct ks8695_rx_dma), lp->rxdma, lp->rxdma_phys);
-+		return ret;
-+	}
-+
-+	printk(KERN_INFO "%s: KS8695 ethernet (%s)\n", dev->name, print_mac(mac, dev->dev_addr));
-+
-+	return 0;
-+}
-+
-+static int __devexit ks8695eth_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+//	struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+
-+	unregister_netdev(dev);
-+
-+	// Free IRQ
-+//	dma_free_coherent(&pdev->dev, sizeof(struct ks8695_tx_dma), lp->txdma, lp->txdma_phys);
-+//	dma_free_coherent(&pdev->dev, sizeof(struct ks8695_rx_dma), lp->rxdma, lp->rxdma_phys);
-+
-+	platform_set_drvdata(pdev, NULL);
-+	free_netdev(dev);
-+	return 0;
-+}
-+
-+static struct platform_driver ks8695ether_driver = {
-+	.probe		= ks8695eth_probe,
-+	.remove		= __devexit_p(ks8695eth_remove),
-+//	.suspend	=
-+//	.resume		=
-+	.driver		= {
-+		.name	= DRV_NAME,
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+
-+static int __init ks8695eth_init(void)
-+{
-+	return platform_driver_register(&ks8695ether_driver);
-+}
-+
-+static void __exit ks8695eth_exit(void)
-+{
-+	platform_driver_unregister(&ks8695ether_driver);
-+}
-+
-+module_init(ks8695eth_init);
-+module_exit(ks8695eth_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("KS8695 Ethernet driver");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- /dev/null
-+++ b/drivers/net/arm/ks8695_ether.h
-@@ -0,0 +1,92 @@
-+/*
-+ * Ethernet driver for the Micrel/Kendin KS8695 (Centaur)
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ */
-+
-+#ifndef KS8695_ETHERNET
-+#define KS8695_ETHERNET
-+
-+/* .... Hardware Descriptors ................................................ */
-+
-+struct rx_descriptor {
-+	unsigned long status;
-+	unsigned long length;
-+	unsigned long addr;
-+	unsigned long next;
-+};
-+
-+#define RDES_OWN	(1 << 31)	/* Ownership */
-+#define RDES_FS		(1 << 30)	/* First Descriptor */
-+#define RDES_LS		(1 << 29)	/* Last Descriptor */
-+#define RDES_IPE	(1 << 28)	/* IP Checksum error */
-+#define RDES_TCPE	(1 << 27)	/* TCP Checksum error */
-+#define RDES_UDPE	(1 << 26)	/* UDP Checksum error */
-+#define RDES_ES		(1 << 25)	/* Error summary */
-+#define RDES_MF		(1 << 24)	/* Multicast Frame */
-+#define RDES_RE		(1 << 19)	/* MII Error reported */
-+#define RDES_TL		(1 << 18)	/* Frame too Long */
-+#define RDES_RF		(1 << 17)	/* Runt Frame */
-+#define RDES_CE		(1 << 16)	/* CRC error */
-+#define RDES_FT		(1 << 15)	/* Frame Type */
-+#define RDES_FLEN	(0x7ff)		/* Frame Length */
-+
-+#define RDES_RER	(1 << 25)	/* Receive End of Ring */
-+#define RDES_RBS	(0x7ff)		/* Receive Buffer Size */
-+
-+
-+struct tx_descriptor {
-+	unsigned long ownership;
-+	unsigned long status;
-+	unsigned long addr;
-+	unsigned long next;
-+};
-+
-+#define TDES_OWN	(1 << 31)	/* Ownership */
-+
-+#define TDES_IC		(1 << 31)	/* Interrupt on Completion */
-+#define TDES_FS		(1 << 30)	/* First Segment */
-+#define TDES_LS		(1 << 29)	/* Last Segment */
-+#define TDES_IPCKG	(1 << 28)	/* IP Checksum generate */
-+#define TDES_TCPCKG	(1 << 27)	/* TCP Checksum generate */
-+#define TDES_UDPCKG	(1 << 26)	/* UDP Checksum generate */
-+#define TDES_TER	(1 << 25)	/* Transmit End of Ring */
-+#define TDES_TBS	(0x7ff)		/* Transmit Buffer Size */
-+
-+
-+/* .... ..................................................................... */
-+
-+#define MAX_RX_DESC	16		/* number of receive descriptors */
-+#define MAX_TX_DESC	8		/* number of transmit descriptors */
-+#define MAX_RXBUF_SIZE	0x600		/* 1518 rounded-up */
-+
-+struct ks8695_buffer
-+{
-+	struct sk_buff *skb;
-+	dma_addr_t dma;
-+	unsigned long length;
-+};
-+
-+
-+struct ks8695eth_priv
-+{
-+	struct device *dev;
-+	unsigned long irqs;				/* IRQ bitset */
-+
-+	/* Transmit */
-+	struct tx_descriptor *txdma;			/* Tx DMA descriptors */
-+	dma_addr_t txdma_phys;				/* TX DMA descriptors (phys address) */
-+	unsigned int tx_head;				/* descriptor index (add) */
-+	unsigned int tx_tail;				/* descriptor index (remove) */
-+	spinlock_t tx_lock;
-+	struct ks8695_buffer txSkb[MAX_TX_DESC];	/* packets being transmitted */
-+
-+	/* Receive */
-+	struct rx_descriptor *rxdma;			/* Rx DMA descriptors */
-+	dma_addr_t rxdma_phys;				/* Rx DMA descriptors (phys address) */
-+	unsigned int rx_idx;				/* descriptor index */
-+	struct ks8695_buffer rxSkb[MAX_RX_DESC];
-+};
-+
-+#endif
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -487,12 +487,12 @@ config RTC_DRV_AT91RM9200
- 	  this is powered by the backup power supply.
- 
- config RTC_DRV_AT91SAM9
--	tristate "AT91SAM9x"
-+	tristate "AT91SAM9x or AT91CAP9"
- 	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
- 	help
--	  RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
--	  These timers are powered by the backup power supply (such as a
--	  small coin cell battery), but do not need to be used as RTCs.
-+	  RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT (Real
-+	  Time Timer).  These timers are powered by the backup power supply
-+	  (such as a small coin cell battery), but do not need to be used as RTCs.
- 
- 	  (On AT91SAM9rl chips you probably want to use the dedicated RTC
- 	  module and leave the RTT available for other uses.)
---- a/drivers/rtc/rtc-at91rm9200.c
-+++ b/drivers/rtc/rtc-at91rm9200.c
-@@ -29,9 +29,6 @@
- #include <linux/completion.h>
- 
- #include <asm/uaccess.h>
--#include <asm/rtc.h>
--
--#include <asm/mach/time.h>
- 
- #include <asm/arch/at91_rtc.h>
- 
-@@ -307,12 +304,6 @@ static int __init at91_rtc_probe(struct 
- 		return ret;
- 	}
- 
--	/* cpu init code should really have flagged this device as
--	 * being wake-capable; if it didn't, do that here.
--	 */
--	if (!device_can_wakeup(&pdev->dev))
--		device_init_wakeup(&pdev->dev, 1);
--
- 	rtc = rtc_device_register(pdev->name, &pdev->dev,
- 				&at91_rtc_ops, THIS_MODULE);
- 	if (IS_ERR(rtc)) {
---- a/drivers/rtc/rtc-at91sam9.c
-+++ b/drivers/rtc/rtc-at91sam9.c
-@@ -21,6 +21,7 @@
- 
- #include <asm/mach/time.h>
- #include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/at91_rtt.h>
- 
- 
-@@ -150,6 +151,9 @@ static int at91_rtc_settime(struct devic
- 	return 0;
- }
- 
-+/*
-+ * Read alarm time and date in RTC
-+ */
- static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -176,6 +180,9 @@ static int at91_rtc_readalarm(struct dev
- 	return 0;
- }
- 
-+/*
-+ * Set alarm time and date in RTC
-+ */
- static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -321,10 +328,6 @@ static int __init at91_rtc_probe(struct 
- 	if (!rtc)
- 		return -ENOMEM;
- 
--	/* platform setup code should have handled this; sigh */
--	if (!device_can_wakeup(&pdev->dev))
--		device_init_wakeup(&pdev->dev, 1);
--
- 	platform_set_drvdata(pdev, rtc);
- 	rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
- 	rtc->rtt += r->start;
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -113,6 +113,15 @@ config SPI_GPIO
- 
- 	  If unsure, say N.
- 
-+config SPI_AT91
-+	tristate "AT91RM9200 Bitbang SPI Master"
-+	depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+	select SPI_BITBANG
-+	help
-+	  This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+	  The SPI_ATMEL driver will be its replacement, using the native
-+	  SPI hardware and its DMA controller.
-+
- config SPI_IMX
- 	tristate "Freescale iMX SPI controller"
- 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24x
- obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
- obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
-+obj-$(CONFIG_SPI_AT91)			+= spi_at91_bitbang.o
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
---- /dev/null
-+++ b/drivers/spi/spi_at91_bitbang.c
-@@ -0,0 +1,208 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ *	- other at91 parts (like at91sam9) have multiple controllers
-+ *	  and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ *	- at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ *	- rm9200 spi chipselects drop wrongly, so the native driver
-+ *	  will need to use gpios much like this does.
-+ *
-+ *	- real hardware only allows 8..16 bits per word, while this
-+ *	  bitbanger allows 1..32 (incompatible superset).
-+ *
-+ *	- this disregards clock parameters.  with inlined gpio calls,
-+ *	  gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ *	  than using the subroutined veresion from txrx_word().
-+ *
-+ *	- suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define	spi_miso_bit	AT91_PIN_PA0
-+#define	spi_mosi_bit	AT91_PIN_PA1
-+#define	spi_sck_bit	AT91_PIN_PA2
-+
-+struct at91_spi {
-+	struct spi_bitbang	bitbang;
-+	struct platform_device	*pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+	at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+	at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+	return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+	unsigned long cs = (unsigned long) spi->controller_data;
-+
-+	/* set default clock polarity */
-+	if (is_active)
-+		setsck(spi, spi->mode & SPI_CPOL);
-+
-+	/* only support active-low (default) */
-+	at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE:  this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define	spidelay(X)	do{} while(0)
-+
-+#define	EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+	int			status;
-+	struct spi_master	*master;
-+	struct at91_spi		*at91_spi;
-+
-+	if (pdev->id != 0)	/* SPI0 bus */
-+		return -EINVAL;
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+	if (!master)
-+		return -ENOMEM;
-+
-+	at91_spi = spi_master_get_devdata(master);
-+	at91_spi->pdev = pdev;
-+	platform_set_drvdata(pdev, at91_spi);
-+
-+	/* SPI and bitbang hookup */
-+	master->bus_num = 0;
-+	master->num_chipselect = 4;
-+
-+	at91_spi->bitbang.master = spi_master_get(master);
-+	at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+	status = spi_bitbang_start(&at91_spi->bitbang);
-+	if (status < 0)
-+		(void) spi_master_put(at91_spi->bitbang.master);
-+
-+	return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+	struct at91_spi	*at91_spi = platform_get_drvdata(pdev);
-+	int status;
-+
-+	/* stop() unregisters child devices too */
-+	status = spi_bitbang_stop(&at91_spi->bitbang);
-+	(void) spi_master_put(at91_spi->bitbang.master);
-+
-+	platform_set_drvdata(pdev, NULL);
-+	return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+	.probe		= at91_spi_probe,
-+	.remove		= __exit_p(at91_spi_remove),
-+	.driver		= {
-+		.name	= "at91_spi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+	at91_set_gpio_output(spi_sck_bit, 0);
-+	at91_set_gpio_output(spi_mosi_bit, 0);
-+	at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+	/* register driver */
-+	return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+	platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:at91_spi");
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@ config USB_AMD5536UDC
- config USB_GADGET_ATMEL_USBA
- 	boolean "Atmel USBA"
- 	select USB_GADGET_DUALSPEED
--	depends on AVR32
-+	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
- 	help
- 	  USBA is the integrated high-speed USB Device controller on
--	  the AT32AP700x processors from Atmel.
-+	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
- 
- config USB_ATMEL_USBA
- 	tristate
---- a/drivers/usb/gadget/at91_udc.c
-+++ b/drivers/usb/gadget/at91_udc.c
-@@ -1827,7 +1827,7 @@ static int at91udc_suspend(struct platfo
- 	 */
- 	if ((!udc->suspended && udc->addr)
- 			|| !wake
--			|| at91_suspend_entering_slow_clock()) {
-+			|| clk_must_disable(udc->fclk)) {
- 		pullup(udc, 0);
- 		wake = 0;
- 	} else
---- a/drivers/usb/gadget/atmel_usba_udc.c
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -18,6 +18,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ch9.h>
- #include <linux/usb/gadget.h>
-+#include <linux/usb/atmel_usba_udc.h>
- #include <linux/delay.h>
- 
- #include <asm/gpio.h>
-@@ -27,6 +28,7 @@
- 
- 
- static struct usba_udc the_udc;
-+static struct usba_ep *usba_ep;
- 
- #ifdef CONFIG_USB_GADGET_DEBUG_FS
- #include <linux/debugfs.h>
-@@ -324,53 +326,6 @@ static int vbus_is_present(struct usba_u
- 	return 1;
- }
- 
--static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
--{
--	unsigned long tmp;
--
--	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
--	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
--		tmp = *(unsigned long *)buf;
--		if (len >= 4) {
--			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
--			__raw_writel(tmp, fifo);
--		} else {
--			do {
--				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
--				__raw_writeb(tmp >> 24, fifo);
--				fifo++;
--				tmp <<= 8;
--			} while (--len);
--			break;
--		}
--	}
--}
--
--static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
--{
--	union {
--		unsigned long *w;
--		unsigned char *b;
--	} p;
--	unsigned long tmp;
--
--	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
--	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
--		if (len >= 4) {
--			tmp = __raw_readl(fifo);
--			*p.w = tmp;
--			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
--		} else {
--			do {
--				tmp = __raw_readb(fifo);
--				*p.b = tmp;
--				DBG(DBG_FIFO, " -> %02lx\n", tmp);
--				fifo++, p.b++;
--			} while (--len);
--		}
--	}
--}
--
- static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
- {
- 	unsigned int transaction_len;
-@@ -387,7 +342,7 @@ static void next_fifo_transaction(struct
- 		ep->ep.name, req, transaction_len,
- 		req->last_transaction ? ", done" : "");
- 
--	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+	memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
- 	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- 	req->req.actual += transaction_len;
- }
-@@ -476,7 +431,7 @@ static void receive_data(struct usba_ep 
- 			bytecount = req->req.length - req->req.actual;
- 		}
- 
--		copy_from_fifo(req->req.buf + req->req.actual,
-+		memcpy_fromio(req->req.buf + req->req.actual,
- 				ep->fifo, bytecount);
- 		req->req.actual += bytecount;
- 
-@@ -1029,33 +984,6 @@ static const struct usb_gadget_ops usba_
- 	.set_selfpowered	= usba_udc_set_selfpowered,
- };
- 
--#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
--{								\
--	.ep	= {						\
--		.ops		= &usba_ep_ops,			\
--		.name		= nam,				\
--		.maxpacket	= maxpkt,			\
--	},							\
--	.udc		= &the_udc,				\
--	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
--	.fifo_size	= maxpkt,				\
--	.nr_banks	= maxbk,				\
--	.index		= idx,					\
--	.can_dma	= dma,					\
--	.can_isoc	= isoc,					\
--}
--
--static struct usba_ep usba_ep[] = {
--	EP("ep0", 0, 64, 1, 0, 0),
--	EP("ep1in-bulk", 1, 512, 2, 1, 1),
--	EP("ep2out-bulk", 2, 512, 2, 1, 1),
--	EP("ep3in-int", 3, 64, 3, 1, 0),
--	EP("ep4out-int", 4, 64, 3, 1, 0),
--	EP("ep5in-iso", 5, 1024, 3, 1, 1),
--	EP("ep6out-iso", 6, 1024, 3, 1, 1),
--};
--#undef EP
--
- static struct usb_endpoint_descriptor usba_ep0_desc = {
- 	.bLength = USB_DT_ENDPOINT_SIZE,
- 	.bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1002,6 @@ static void nop_release(struct device *d
- static struct usba_udc the_udc = {
- 	.gadget	= {
- 		.ops		= &usba_udc_ops,
--		.ep0		= &usba_ep[0].ep,
- 		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
- 		.is_dualspeed	= 1,
- 		.name		= "atmel_usba_udc",
-@@ -1231,7 +1158,7 @@ static int do_test_mode(struct usba_udc 
- 		} else {
- 			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
- 			usba_writel(udc, TST, USBA_TST_PKT_MODE);
--			copy_to_fifo(ep->fifo, test_packet_buffer,
-+			memcpy_toio(ep->fifo, test_packet_buffer,
- 					sizeof(test_packet_buffer));
- 			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- 			dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1457,13 @@ restart:
- 		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
- 		if (pkt_len != sizeof(crq)) {
- 			pr_warning("udc: Invalid packet length %u "
--				"(expected %lu)\n", pkt_len, sizeof(crq));
-+				"(expected %zu)\n", pkt_len, sizeof(crq));
- 			set_protocol_stall(udc, ep);
- 			return;
- 		}
- 
- 		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
--		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+		memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
- 
- 		/* Free up one bank in the FIFO so that we can
- 		 * generate or receive a reply right away. */
-@@ -1908,7 +1835,7 @@ static int __init usba_udc_probe(struct 
- 
- 	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
- 	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
--	if (!regs || !fifo)
-+	if (!regs || !fifo || !pdata)
- 		return -ENXIO;
- 
- 	irq = platform_get_irq(pdev, 0);
-@@ -1956,16 +1883,44 @@ static int __init usba_udc_probe(struct 
- 	usba_writel(udc, CTRL, 0);
- 	clk_disable(pclk);
- 
-+	usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
-+			  GFP_KERNEL);
-+	if (!usba_ep)
-+		goto err_alloc_ep;
-+
-+	the_udc.gadget.ep0 = &usba_ep[0].ep;
-+
- 	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- 	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- 	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- 	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+	usba_ep[0].ep.ops = &usba_ep_ops;
-+	usba_ep[0].ep.name = pdata->ep[0].name;
-+	usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
-+	usba_ep[0].udc = &the_udc;
-+	INIT_LIST_HEAD(&usba_ep[0].queue);
-+	usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
-+	usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
-+	usba_ep[0].index = pdata->ep[0].index;
-+	usba_ep[0].can_dma = pdata->ep[0].can_dma;
-+	usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-+
-+	for (i = 1; i < pdata->num_ep; i++) {
- 		struct usba_ep *ep = &usba_ep[i];
- 
- 		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- 		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- 		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
-+		ep->ep.ops = &usba_ep_ops;
-+		ep->ep.name = pdata->ep[i].name;
-+		ep->ep.maxpacket = pdata->ep[i].fifo_size;
-+		ep->udc = &the_udc;
-+		INIT_LIST_HEAD(&ep->queue);
-+		ep->fifo_size = pdata->ep[i].fifo_size;
-+		ep->nr_banks = pdata->ep[i].nr_banks;
-+		ep->index = pdata->ep[i].index;
-+		ep->can_dma = pdata->ep[i].can_dma;
-+		ep->can_isoc = pdata->ep[i].can_isoc;
- 
- 		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
- 	}
-@@ -1984,7 +1939,7 @@ static int __init usba_udc_probe(struct 
- 		goto err_device_add;
- 	}
- 
--	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+	if (pdata->vbus_pin >= 0) {
- 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- 			udc->vbus_pin = pdata->vbus_pin;
- 
-@@ -2004,7 +1959,7 @@ static int __init usba_udc_probe(struct 
- 	}
- 
- 	usba_init_debugfs(udc);
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+	for (i = 1; i < pdata->num_ep; i++)
- 		usba_ep_init_debugfs(udc, &usba_ep[i]);
- 
- 	return 0;
-@@ -2012,6 +1967,8 @@ static int __init usba_udc_probe(struct 
- err_device_add:
- 	free_irq(irq, udc);
- err_request_irq:
-+	kfree(usba_ep);
-+err_alloc_ep:
- 	iounmap(udc->fifo);
- err_map_fifo:
- 	iounmap(udc->regs);
-@@ -2029,10 +1986,11 @@ static int __exit usba_udc_remove(struct
- {
- 	struct usba_udc *udc;
- 	int i;
-+	struct usba_platform_data *pdata = pdev->dev.platform_data;
- 
- 	udc = platform_get_drvdata(pdev);
- 
--	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+	for (i = 1; i < pdata->num_ep; i++)
- 		usba_ep_cleanup_debugfs(&usba_ep[i]);
- 	usba_cleanup_debugfs(udc);
- 
---- a/drivers/usb/host/ohci-at91.c
-+++ b/drivers/usb/host/ohci-at91.c
-@@ -330,7 +330,7 @@ ohci_hcd_at91_drv_suspend(struct platfor
- 	 *
- 	 * REVISIT: some boards will be able to turn VBUS off...
- 	 */
--	if (at91_suspend_entering_slow_clock()) {
-+	if (clk_must_disable(fclk)) {
- 		ohci_usb_reset (ohci);
- 		at91_stop_clock();
- 	}
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -889,6 +889,17 @@ config FB_EPSON1355
- 	  framebuffer.  Product specs at
- 	  <http://www.erd.epson.com/vdc/html/products.htm>.
- 
-+config FB_S1D15605
-+	tristate "Epson S1D15605 framebuffer support"
-+	depends on FB
-+	default m if MACH_KB9200
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Build in support for the S1D15605 Epson Research 128x64
-+	  LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- 	tristate "Epson S1D13XXX framebuffer support"
- 	depends on FB
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364)             += g36
- obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
- obj-$(CONFIG_FB_HIT)              += hitfb.o
- obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
--obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
-+obj-$(CONFIG_FB_S1D15605)	  += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL)            += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -31,7 +31,7 @@
- #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
- #define ATMEL_LCDC_DMA_BURST_LEN	8
- 
--#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
-+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || defined(CONFIG_ARCH_AT91SAM9RL)
- #define ATMEL_LCDC_FIFO_SIZE		2048
- #else
- #define ATMEL_LCDC_FIFO_SIZE		512
-@@ -903,11 +903,45 @@ static int __exit atmel_lcdfb_remove(str
- 	return 0;
- }
- 
--static struct platform_driver atmel_lcdfb_driver = {
--	.remove		= __exit_p(atmel_lcdfb_remove),
-+#ifdef CONFIG_PM
-+
-+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+	struct fb_info *info = platform_get_drvdata(pdev);
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+
-+	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(0);
-+	atmel_lcdfb_stop_clock(sinfo);
- 
--// FIXME need suspend, resume
-+	return 0;
-+}
-+
-+static int atmel_lcdfb_resume(struct platform_device *pdev)
-+{
-+	struct fb_info *info = platform_get_drvdata(pdev);
-+	struct atmel_lcdfb_info *sinfo = info->par;
- 
-+	atmel_lcdfb_start_clock(sinfo);
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(1);
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
-+
-+	return 0;
-+}
-+
-+#else
-+#define atmel_lcdfb_suspend	NULL
-+#define atmel_lcdfb_resume	NULL
-+#endif
-+
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+	.remove		= __exit_p(atmel_lcdfb_remove),
-+	.suspend	= atmel_lcdfb_suspend,
-+	.resume		= atmel_lcdfb_resume,
- 	.driver		= {
- 		.name	= "atmel_lcdfb",
- 		.owner	= THIS_MODULE,
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -112,3 +112,11 @@ config BACKLIGHT_CARILLO_RANCH
- 	help
- 	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
- 	  backlight driver.
-+
-+config BACKLIGHT_KB920x
-+	tristate "KwikByte KB9202 Backlight Driver"
-+	depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+	default y
-+	help
-+	  If you have a KwikByte KB9202 board, say Y to enable the
-+	  backlight driver.
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomo
- obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
- obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
-+obj-$(CONFIG_BACKLIGHT_KB920x)	+= kb920x_bl.o
---- /dev/null
-+++ b/drivers/video/backlight/kb920x_bl.c
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define	KB9202_DEFAULT_INTENSITY	1
-+#define	KB9202_MAX_INTENSITY		1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+	unsigned long flags;
-+	int intensity = bd->props.brightness;
-+
-+	if (bd->props.power != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (kb9202bl_suspended)
-+		intensity = 0;
-+
-+	if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+		intensity = 1;
-+
-+	spin_lock_irqsave(&bl_lock, flags);
-+	if (intensity)
-+		gpio_set_value(AT91_PIN_PC23, 1);
-+	else
-+		gpio_set_value(AT91_PIN_PC23, 0);
-+	spin_unlock_irqrestore(&bl_lock, flags);
-+
-+	current_intensity = intensity;
-+
-+	return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+	return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+	.get_brightness	= kb9202bl_get_intensity,
-+	.update_status	= kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+	struct backlight_device *bd;
-+
-+	bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+	if (IS_ERR(bd))
-+		return PTR_ERR(bd);
-+
-+	platform_set_drvdata(pdev, bd);
-+
-+	bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+	bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+	(void) kb9202bl_set_intensity(bd);
-+
-+	return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	bd->props.brightness = 0;
-+	bd->props.power = 0;
-+	(void) kb9202bl_set_intensity(bd);
-+
-+	backlight_device_unregister(bd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	kb9202bl_suspended = 1;
-+	(void) kb9202bl_set_intensity(bd);
-+	return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *pdev)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	kb9202bl_suspended = 0;
-+	(void) kb9202bl_set_intensity(bd);
-+	return 0;
-+}
-+#else
-+#define kb9202bl_suspend	NULL
-+#define kb9202bl_resume		NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+	.probe		= kb9202bl_probe,
-+	.remove		= kb9202bl_remove,
-+	.suspend	= kb9202bl_suspend,
-+	.resume		= kb9202bl_resume,
-+	.driver		= {
-+		.name	= "kb9202-bl",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_register(&kb9202bl_driver);
-+	if (!ret) {
-+		kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+		if (!kb9202bl_device)
-+			return -ENOMEM;
-+
-+		ret = platform_device_add(kb9202bl_device);
-+		if (ret) {
-+			platform_device_put(kb9202bl_device);
-+			platform_driver_unregister(&kb9202bl_driver);
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+	platform_device_unregister(kb9202bl_device);
-+	platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/video/s1d15605fb.c
-@@ -0,0 +1,655 @@
-+/*
-+ *  drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ *    Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ *   This file is subject to the terms and conditions of the GNU General Public
-+ *   License. See the file COPYING in the main directory of this archive for
-+ *   more details.
-+ *
-+ *   This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ *   display.  This display uses a clone of the common Epson SED 1531 display
-+ *   controller.
-+ *
-+ *   I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH		128
-+#define VIDEOHEIGHT		64
-+#define VIDEODEPTH		1	/* bits/pixel */
-+#define VIDEOWIDTH_BYTES	((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE	(VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE		PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+	.xres		= VIDEOWIDTH,
-+	.yres		= VIDEOHEIGHT,
-+	.xres_virtual	= VIDEOWIDTH,
-+	.yres_virtual	= VIDEOHEIGHT,
-+	.bits_per_pixel	= VIDEODEPTH,
-+	.red		= { 0, 1, 0 },
-+	.green		= { 0, 1, 0 },
-+	.blue		= { 0, 1, 0 },
-+	.activate	= FB_ACTIVATE_NOW,
-+	.pixclock	= 20000,
-+	.vmode		= FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+	.id		= "s1d15605",
-+	.type		= FB_TYPE_PACKED_PIXELS,
-+	.visual		= FB_VISUAL_MONO10,
-+	.xpanstep	= 0,
-+	.ypanstep	= 0,
-+	.ywrapstep	= 0,
-+	.accel		= FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+	struct fb_info		*info;
-+	char			*mmio;
-+	unsigned long		reset_pin;
-+	struct platform_device	*pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define	RESET_DISPLAY		0xE2
-+#define	LCD_BIAS_1_9		0xA2
-+#define	ADC_SELECT_REVERSE	0xA1
-+#define	COMMON_OUTPUT_NORMAL	0xC0
-+#define	V5_RESISTOR_RATIO	0x26
-+#define	ELECTRONIC_VOLUME_SET	0x81
-+#define	ELECTRONIC_VOLUME_INIT	0x20
-+#define	POWER_CONTROL_SET	0x28
-+#define	VOLTAGE_REGULATOR	0x02
-+#define	VOLTAGE_FOLLOWER	0x01
-+#define	BOOSTER_CIRCUIT		0x04
-+#define	DISPLAY_ON		0xAF
-+#define	START_LINE_SET		0x40
-+#define	PAGE_ADDRESS_SET	0xB0
-+#define	COLUMN_ADDRESS_HIGH	0x10
-+#define	COLUMN_ADDRESS_LOW	0x00
-+#define	RESISTOR_RATIO_START	0x20
-+
-+#define	NUM_OF_PAGES		8
-+#define	NUM_OF_COLUMNS		128
-+
-+#define	WRITE_COMMAND(x)	__raw_writeb((x), (sinfo)->mmio)
-+#define	READ_COMMAND		__raw_readb((sinfo)->mmio)
-+#define	WRITE_DATA(x)		__raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define	READ_DATA		__raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ *	s1d15605fb_resize_framebuffer
-+ *
-+ *	Free allocated space if different.  Allocate on new of changed.
-+ *	Returns -ENOMEM if the new framebuffer can not be allocated,
-+ *	zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+	struct fb_info			*info = sinfo->info;
-+	struct fb_fix_screeninfo	*fix = &info->fix;
-+	struct fb_var_screeninfo	*var = &info->var;
-+	unsigned int			new_size;
-+	void				*new_vaddr;
-+
-+	new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+	MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+		var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+	if (new_size == fix->smem_len)
-+		return 0;
-+
-+	if (fix->smem_len) {
-+		kfree(info->screen_base);
-+	}
-+
-+	new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+	if (!new_vaddr) {
-+		fix->smem_len = 0;
-+		return -ENOMEM;
-+	}
-+
-+	info->screen_base = new_vaddr;
-+	fix->smem_start = (unsigned)new_vaddr;
-+	fix->smem_len = new_size;
-+	fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+	dev_info(info->device,
-+		"%luKiB frame buffer at %08lx (mapped at %p)\n",
-+		(unsigned long)info->fix.smem_len / 1024,
-+		(unsigned long)info->fix.smem_start,
-+		info->screen_base);
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+	struct s1d15605fb_info	*sinfo = info->par;
-+	int			page, i, row, colmask;
-+	u8			retVal, *rowPtr;
-+
-+	WRITE_COMMAND(START_LINE_SET);
-+	for (page = 0; page < NUM_OF_PAGES; ++page) {
-+		WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+		WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+		WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+		for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+		{
-+			/* point of opportunity: optimization */
-+			colmask = (1 << (i & 0x7));
-+			rowPtr = (u8*)(info->screen_base);
-+			rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+			rowPtr += (i >> 3);
-+			retVal = 0;
-+			for (row = 0; row < 8; ++row)
-+			{
-+				retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+				rowPtr += VIDEOWIDTH_BYTES;
-+			}
-+			WRITE_DATA(retVal);
-+		}
-+	}
-+
-+	WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+	/*
-+	 * Some very basic checks
-+	 */
-+	if (!var->xres)
-+		var->xres = 1;
-+	if (!var->yres)
-+		var->yres = 1;
-+	if (var->xres > var->xres_virtual)
-+		var->xres_virtual = var->xres;
-+	if (var->yres > var->yres_virtual)
-+		var->yres_virtual = var->yres;
-+
-+	if(var->bits_per_pixel > VIDEODEPTH)
-+		return -EINVAL;
-+
-+	/*
-+	 * Memory limit
-+	 */
-+	if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+			ACTUALVIDEOMEMSIZE)
-+		return -ENOMEM;
-+
-+	/*
-+	 * Now that we checked it we alter var. The reason being is that the video
-+	 * mode passed in might not work but slight changes to it might make it
-+	 * work. This way we let the user know what is acceptable.
-+	 */
-+	switch (var->bits_per_pixel) {
-+	case 1:
-+		var->red.offset = var->green.offset = var->blue.offset = 0;
-+		var->red.length = var->green.length = var->blue.length
-+			= var->bits_per_pixel;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	var->xoffset = var->yoffset = 0;
-+	var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+		var->transp.msb_right = 0;
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+	int	ret;
-+
-+	MSG("%s:\n", __func__);
-+	MSG("  * resolution: %ux%u (%ux%u virtual)\n",
-+		 info->var.xres, info->var.yres,
-+		 info->var.xres_virtual, info->var.yres_virtual);
-+
-+	ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+	info->fix.visual = FB_VISUAL_MONO10;
-+	return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+			u_int transp, struct fb_info *info)
-+{
-+	if (regno > 1)	/* no. of hw registers - we only do mono now */
-+		return 1;
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes.  Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+	if (blank)
-+		pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+	else
-+		pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+	backlight_update_status(pmac_backlight);
-+#endif
-+	return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+			struct fb_info *info)
-+{
-+	if (var->vmode & FB_VMODE_YWRAP) {
-+		if (var->yoffset < 0
-+		    || var->yoffset >= info->var.yres_virtual
-+		    || var->xoffset)
-+			return -EINVAL;
-+	} else {
-+		if (var->xoffset + var->xres > info->var.xres_virtual ||
-+		    var->yoffset + var->yres > info->var.yres_virtual)
-+			return -EINVAL;
-+	}
-+	info->var.xoffset = var->xoffset;
-+	info->var.yoffset = var->yoffset;
-+	if (var->vmode & FB_VMODE_YWRAP)
-+		info->var.vmode |= FB_VMODE_YWRAP;
-+	else
-+		info->var.vmode &= ~FB_VMODE_YWRAP;
-+	return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+	cfb_copyarea(info, region);
-+	s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+	cfb_fillrect(info, rect);
-+	s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+	cfb_imageblit(p, image);
-+	s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct fb_info *info, const char *buf,
-+			size_t count, loff_t *ppos)
-+{
-+	unsigned long p = *ppos;
-+	int err;
-+
-+	if (p > info->fix.smem_len)
-+		return -ENOSPC;
-+	if (count >= info->fix.smem_len)
-+		count = info->fix.smem_len;
-+	err = 0;
-+	if (count + p > info->fix.smem_len) {
-+		count = info->fix.smem_len - p;
-+		err = -ENOSPC;
-+	}
-+	if (count) {
-+		char *base_addr;
-+
-+		base_addr = info->screen_base;
-+		count -= copy_from_user(base_addr+p, buf, count);
-+		*ppos += count;
-+		err = -EFAULT;
-+	}
-+
-+	s1d15605_update(info);
-+
-+	if (count)
-+		return count;
-+
-+	return err;
-+}
-+
-+#ifdef	USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+	// FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+	// FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+				unsigned long address, int *type)
-+{
-+	struct page *page;
-+	struct fb_info *info = vma->vm_private_data;
-+
-+	page = virt_to_page(info->screen_base);
-+	get_page(page);
-+
-+	// FIXME - now someone has a link to our page, start periodically blitting
-+	// latest updates to the actual device.
-+
-+	return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+	.open	= s1d15605_vma_open,
-+	.close	= s1d15605_vma_close,
-+	.nopage	= s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+	vma->vm_ops = &s1d15605_vm_ops;
-+	vma->vm_flags |= VM_RESERVED;
-+	vma->vm_private_data = info;
-+	s1d15605_vma_open(vma);
-+
-+	return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_check_var	= s1d15605_check_var,
-+	.fb_set_par	= s1d15605_set_par,
-+	.fb_setcolreg	= s1d15605_setcolreg,
-+	.fb_blank	= s1d15605_blank,
-+//	.fb_pan_display	= s1d15605_pan_display,
-+	.fb_fillrect	= s1d15605_fillrect,
-+	.fb_copyarea	= s1d15605_copyarea,
-+	.fb_imageblit	= s1d15605_imageblit,
-+	.fb_write	= s1d15605_write,
-+#ifdef	USE_PRIVATE_VMA_FXS
-+	.fb_mmap	= s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+	char	value;
-+
-+	/* release the reset line by reading the device - proto hardware */
-+	value = READ_COMMAND;
-+	value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+	/* new boards have dedicated reset line */
-+	gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+	/* initialize the device within 5ms */
-+	WRITE_COMMAND(RESET_DISPLAY);
-+	WRITE_COMMAND(LCD_BIAS_1_9);
-+	WRITE_COMMAND(ADC_SELECT_REVERSE);
-+	WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+	WRITE_COMMAND(V5_RESISTOR_RATIO);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+	WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+	WRITE_COMMAND(DISPLAY_ON);
-+
-+	WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+	WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int __init s1d15605fb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info;
-+	struct s1d15605fb_info *sinfo;
-+	int ret;
-+
-+	MSG("%s\n", __func__);
-+
-+	if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+		dev_err(dev, "Cannot allocate framebuffer struct\n");
-+		return -ENOMEM;
-+	}
-+
-+	sinfo = info->par;
-+	sinfo->info = info;
-+	sinfo->pdev = pdev;
-+
-+	if (pdev->num_resources < 2) {
-+		dev_err(dev, "Resources unusable\n");
-+		ret = -ENODEV;
-+		goto free_info;
-+	}
-+
-+	info->fbops = &s1d15605fb_ops;
-+	strcpy(info->fix.id, pdev->name);
-+
-+	info->fix.mmio_start = pdev->resource[0].start;
-+	info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+	sinfo->reset_pin = pdev->resource[1].start;
-+
-+	ret = s1d15605fb_resize_framebuffer(sinfo);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+		goto free_fb;
-+	}
-+
-+	if (!request_mem_region(info->fix.mmio_start,
-+				info->fix.mmio_len, pdev->name)) {
-+		ret = -EBUSY;
-+		goto free_fb;
-+	}
-+
-+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+	if (!sinfo->mmio) {
-+		dev_err(dev, "Cannot map LCD memory region\n");
-+		goto release_mem;
-+	}
-+
-+	s1d15605_device_init(sinfo);
-+
-+	ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+	if (!ret || (ret == 4))
-+		info->var = s1d15605_default;
-+
-+	info->fix = s1d15605_fix;
-+	info->flags = FBINFO_FLAG_DEFAULT |
-+/*		FBINFO_HWACCEL_YPAN | */
-+		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+	ret = register_framebuffer(info);
-+	if (ret < 0) {
-+		dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+		goto unmap_mmio;
-+	}
-+
-+	dev_set_drvdata(dev, info);
-+
-+	memset(info->screen_base, 0, info->fix.smem_len);
-+	info->var.activate |= FB_ACTIVATE_NOW;
-+	ret = fb_set_var(info, &info->var);
-+	if (ret) {
-+		dev_warn(dev, "Unable to set display parameters\n");
-+	}
-+
-+	info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+	dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+	dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+	return 0;
-+
-+unmap_mmio:
-+	iounmap(sinfo->mmio);
-+release_mem:
-+	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+	kfree(info->screen_base);
-+
-+free_info:
-+	framebuffer_release(info);
-+
-+	dev_dbg(dev, "%s FAILED\n", __func__);
-+	return ret;
-+}
-+
-+
-+static int __exit s1d15605fb_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info = dev_get_drvdata(dev);
-+	struct s1d15605fb_info *sinfo = info->par;
-+
-+	if (!sinfo)
-+		return 0;
-+
-+	unregister_framebuffer(info);
-+
-+	iounmap(sinfo->mmio);
-+	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+	kfree(info->screen_base);
-+
-+	dev_set_drvdata(dev, NULL);
-+	framebuffer_release(info);
-+	return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+	.remove		= __exit_p(s1d15605fb_remove),
-+	.driver		= {
-+		.name	= "s1d15605fb",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+	return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+	platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -66,6 +66,14 @@ config AT91RM9200_WATCHDOG
- 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
- 	  system when the timeout is reached.
- 
-+config AT91SAM9_WATCHDOG
-+	tristate "AT91SAM9 watchdog"
-+	depends on ARCH_AT91 && !ARCH_AT91RM9200
-+	select WATCHDOG_NOWAYOUT
-+	help
-+	  Watchdog timer embedded into AT91SAM9 chips. This will reboot your
-+	  system when the timeout is reached.
-+
- config 21285_WATCHDOG
- 	tristate "DC21285 watchdog"
- 	depends on FOOTBRIDGE
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.
- 
- # ARM Architecture
- obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
-+obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
- obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
- obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.c
-@@ -0,0 +1,259 @@
-+/*
-+ * Watchdog driver for Atmel AT91SAM9x processors.
-+ *
-+ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+/*
-+ * The Watchdog Timer Mode Register can be only written to once. If the
-+ * timeout need to be set from Linux, be sure that the bootstrap or the
-+ * bootloader doesn't write to this register.
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/watchdog.h>
-+#include <linux/bitops.h>
-+#include <linux/uaccess.h>
-+
-+#include <asm/arch/at91_wdt.h>
-+
-+
-+#define WDT_MAX_TIME		16	/* seconds */
-+
-+static int wdt_timeout = -1;		/* invalid */
-+
-+module_param(wdt_timeout, int, 0);
-+MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)");
-+
-+
-+static unsigned long at91wdt_busy;
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Reload the watchdog timer.  (ie, pat the watchdog)
-+ */
-+static void inline at91_wdt_reload(void)
-+{
-+	at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at91_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &at91wdt_busy))
-+		return -EBUSY;
-+
-+	return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device.
-+ */
-+static int at91_wdt_close(struct inode *inode, struct file *file)
-+{
-+	clear_bit(0, &at91wdt_busy);
-+	return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at91_wdt_settimeout(int new_time)
-+{
-+	unsigned int reg, mr;
-+	/*
-+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
-+	 *
-+	 * Since WDV is a 12-bit counter, the maximum period is
-+	 * 4096 / 256 = 16 seconds.
-+	 */
-+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+		return -EINVAL;
-+
-+	wdt_timeout = new_time;
-+
-+	/* Program the Watchdog */
-+	reg = AT91_WDT_WDRSTEN					/* causes watchdog reset */
-+		| AT91_WDT_WDRPROC				/* causes processor reset */
-+		| AT91_WDT_WDDBGHLT				/* disabled in debug mode */
-+		| AT91_WDT_WDD					/* restart at any time */
-+		| (((wdt_timeout * 256) - 1) & AT91_WDT_WDV);	/* timer value */
-+	at91_sys_write(AT91_WDT_MR, reg);
-+
-+	/* Check if watchdog could be programmed */
-+	mr = at91_sys_read(AT91_WDT_MR);
-+	if (mr != reg) {
-+		printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n");
-+		return -EIO;
-+	}
-+
-+	at91_wdt_reload();
-+
-+	printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout);
-+	return 0;
-+}
-+
-+static struct watchdog_info at91_wdt_info = {
-+	.identity	= "at91sam9 watchdog",
-+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at91_wdt_ioctl(struct inode *inode, struct file *file,
-+		unsigned int cmd, unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+	int new_value, err;
-+
-+	switch (cmd) {
-+	case WDIOC_KEEPALIVE:
-+		at91_wdt_reload();	/* pat the watchdog */
-+		return 0;
-+
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-+
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(new_value, p))
-+			return -EFAULT;
-+
-+		err = at91_wdt_settimeout(new_value);
-+		if (err)
-+			return err;
-+
-+		return put_user(wdt_timeout, p);	/* return current value */
-+
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(wdt_timeout, p);
-+
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		return put_user(0, p);
-+	}
-+	return -ENOTTY;
-+}
-+
-+/*
-+ * Pat the watchdog whenever device is written to.
-+ */
-+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+	at91_wdt_reload();		/* pat the watchdog */
-+	return len;
-+}
-+
-+/* ......................................................................... */
-+
-+static const struct file_operations at91wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.ioctl		= at91_wdt_ioctl,
-+	.open		= at91_wdt_open,
-+	.release	= at91_wdt_close,
-+	.write		= at91_wdt_write,
-+};
-+
-+static struct miscdevice at91wdt_miscdev = {
-+	.minor		= WATCHDOG_MINOR,
-+	.name		= "watchdog",
-+	.fops		= &at91wdt_fops,
-+};
-+
-+static int __init at91wdt_probe(struct platform_device *pdev)
-+{
-+	int res;
-+
-+	if (at91wdt_miscdev.parent)
-+		return -EBUSY;
-+	at91wdt_miscdev.parent = &pdev->dev;
-+
-+	res = misc_register(&at91wdt_miscdev);
-+	if (res)
-+		return res;
-+
-+	/* Set watchdog */
-+	if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) {
-+		pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME);
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __exit at91wdt_remove(struct platform_device *pdev)
-+{
-+	int res;
-+
-+	res = misc_deregister(&at91wdt_miscdev);
-+	if (!res)
-+		at91wdt_miscdev.parent = NULL;
-+
-+	return res;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+	return 0;
-+}
-+
-+static int at91wdt_resume(struct platform_device *pdev)
-+{
-+	return 0;
-+}
-+
-+#else
-+#define at91wdt_suspend	NULL
-+#define at91wdt_resume	NULL
-+#endif
-+
-+static struct platform_driver at91wdt_driver = {
-+	.remove		= __exit_p(at91wdt_remove),
-+	.suspend	= at91wdt_suspend,
-+	.resume		= at91wdt_resume,
-+	.driver		= {
-+		.name	= "at91_wdt",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91sam_wdt_init(void)
-+{
-+	return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
-+}
-+
-+static void __exit at91sam_wdt_exit(void)
-+{
-+	platform_driver_unregister(&at91wdt_driver);
-+}
-+
-+module_init(at91sam_wdt_init);
-+module_exit(at91sam_wdt_exit);
-+
-+MODULE_AUTHOR("Renaud CERRATO");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:at91_wdt");
---- a/include/asm-arm/arch-at91/at91_ecc.h
-+++ b/include/asm-arm/arch-at91/at91_ecc.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_ecc.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Error Corrected Code Controller (ECC) - System peripherals regsters.
-  * Based on AT91SAM9260 datasheet revision B.
-  *
-@@ -13,26 +16,26 @@
- #ifndef AT91_ECC_H
- #define AT91_ECC_H
- 
--#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
-+#define AT91_ECC_CR		0x00			/* Control register */
- #define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
- 
--#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
-+#define AT91_ECC_MR		0x04			/* Mode register */
- #define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
- #define			AT91_ECC_PAGESIZE_528		(0)
- #define			AT91_ECC_PAGESIZE_1056		(1)
- #define			AT91_ECC_PAGESIZE_2112		(2)
- #define			AT91_ECC_PAGESIZE_4224		(3)
- 
--#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
-+#define AT91_ECC_SR		0x08			/* Status register */
- #define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
- #define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
- #define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
- 
--#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
-+#define AT91_ECC_PR		0x0c			/* Parity register */
- #define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
- #define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
- 
--#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
-+#define AT91_ECC_NPR		0x10			/* NParity register */
- #define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
- 
- #endif
---- a/include/asm-arm/arch-at91/at91_pit.h
-+++ b/include/asm-arm/arch-at91/at91_pit.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_pit.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Periodic Interval Timer (PIT) - System peripherals regsters.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
---- a/include/asm-arm/arch-at91/at91_pmc.h
-+++ b/include/asm-arm/arch-at91/at91_pmc.h
-@@ -23,6 +23,7 @@
- #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
- #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
- #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
- #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
- #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
- #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
-@@ -39,10 +40,14 @@
- #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
- 
- #define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
-+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
-+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
-+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
- 
- #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
- #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
--#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
-+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
- #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
- 
- #define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-@@ -56,6 +61,7 @@
- #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
- #define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
- #define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-+#define		AT91CAP9_PMC_USBDIV	(0xf   << 28)		/* USB Divisor (PLLB only) [AT91CAP9 revC only] */
- #define			AT91_PMC_USBDIV_1		(0 << 28)
- #define			AT91_PMC_USBDIV_2		(1 << 28)
- #define			AT91_PMC_USBDIV_4		(2 << 28)
-@@ -76,10 +82,13 @@
- #define			AT91_PMC_PRES_32		(5 << 2)
- #define			AT91_PMC_PRES_64		(6 << 2)
- #define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
--#define			AT91_PMC_MDIV_1			(0 << 8)
--#define			AT91_PMC_MDIV_2			(1 << 8)
--#define			AT91_PMC_MDIV_3			(2 << 8)
--#define			AT91_PMC_MDIV_4			(3 << 8)
-+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
-+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
-+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
-+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
-+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
-+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
- 
- #define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
- 
-@@ -90,10 +99,17 @@
- #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
- #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
- #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
-+#define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
- #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
- #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
- #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
- #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
- #define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
- 
-+#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
-+#define		AT91_PMC_PROTKEY	0x504d4301		/* Activation Code */
-+
-+#define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
-+
- #endif
---- a/include/asm-arm/arch-at91/at91_rstc.h
-+++ b/include/asm-arm/arch-at91/at91_rstc.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_rstc.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Reset Controller (RSTC) - System peripherals regsters.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
---- a/include/asm-arm/arch-at91/at91_rtt.h
-+++ b/include/asm-arm/arch-at91/at91_rtt.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_rtt.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Real-time Timer (RTT) - System peripherals regsters.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
---- a/include/asm-arm/arch-at91/at91_shdwc.h
-+++ b/include/asm-arm/arch-at91/at91_shdwc.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_shdwc.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Shutdown Controller (SHDWC) - System peripherals regsters.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
-@@ -24,10 +27,12 @@
- #define			AT91_SHDW_WKMODE0_LOW		2
- #define			AT91_SHDW_WKMODE0_ANYLEVEL	3
- #define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
-+#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
- #define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
- 
- #define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
- #define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
- #define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-+#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
- 
- #endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91_tsc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_tsc.h
-+ *
-+ * Copyright (C) 2008 Andrew Victor
-+ *
-+ * Touch Screen ADC Controller (TSC)
-+ * Based on AT91SAM9RL64 preliminary draft datasheet.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef AT91_TSC_H
-+#define AT91_TSC_H
-+
-+#define AT91_TSADCC_CR		0x00	/* Control register */
-+#define		AT91_TSADCC_SWRST	(1 << 0)	/* Software Reset*/
-+#define		AT91_TSADCC_START	(1 << 1)	/* Start conversion */
-+
-+#define AT91_TSADCC_MR		0x04	/* Mode register */
-+#define		AT91_TSADCC_TSAMOD	(3    <<  0)	/* ADC mode */
-+#define		AT91_TSADCC_LOWRES	(1    <<  4)	/* Resolution selection */
-+#define		AT91_TSADCC_SLEEP	(1    <<  5)	/* Sleep mode */
-+#define		AT91_TSADCC_PENDET	(1    <<  6)	/* Pen Detect selection */
-+#define		AT91_TSADCC_PRESCAL	(0x3f <<  8)	/* Prescalar Rate Selection */
-+#define		AT91_TSADCC_STARTUP	(0x7f << 16)	/* Start Up time */
-+#define		AT91_TSADCC_SHTIM	(0xf  << 24)	/* Sample & Hold time */
-+#define		AT91_TSADCC_PENDBC	(0xf  << 28)	/* Pen Detect debouncing time */
-+
-+#define AT91_TSADCC_TRGR	0x08	/* Trigger register */
-+#define		AT91_TSADCC_TRGMOD	(7      << 0)	/* Trigger mode */
-+#define			AT91_TSADCC_TRGMOD_NONE		(0 << 0)
-+#define			AT91_TSADCC_TRGMOD_EXT_RISING	(1 << 0)
-+#define			AT91_TSADCC_TRGMOD_EXT_FALLING	(2 << 0)
-+#define			AT91_TSADCC_TRGMOD_EXT_ANY	(3 << 0)
-+#define			AT91_TSADCC_TRGMOD_PENDET	(4 << 0)
-+#define			AT91_TSADCC_TRGMOD_PERIOD	(5 << 0)
-+#define			AT91_TSADCC_TRGMOD_CONTINUOUS	(6 << 0)
-+#define		AT91_TSADCC_TRGPER	(0xffff << 16)	/* Trigger period */
-+
-+#define AT91_TSADCC_TSR		0x0C	/* Touch Screen register */
-+#define		AT91_TSADCC_TSFREQ	(0xf <<  0)	/* TS Frequency in Interleaved mode */
-+#define		AT91_TSADCC_TSSHTIM	(0xf << 24)	/* Sample & Hold time */
-+
-+#define AT91_TSADCC_CHER	0x10	/* Channel Enable register */
-+#define AT91_TSADCC_CHDR	0x14	/* Channel Disable register */
-+#define AT91_TSADCC_CHSR	0x18	/* Channel Status register */
-+#define		AT91_TSADCC_CH(n)	(1 << (n))	/* Channel number */
-+
-+#define AT91_TSADCC_SR		0x1C	/* Status register */
-+#define		AT91_TSADCC_EOC(n)	(1 << ((n)+0))	/* End of conversion for channel N */
-+#define		AT91_TSADCC_OVRE(n)	(1 << ((n)+8))	/* Overrun error for channel N */
-+#define		AT91_TSADCC_DRDY	(1 << 16)	/* Data Ready */
-+#define		AT91_TSADCC_GOVRE	(1 << 17)	/* General Overrun Error */
-+#define		AT91_TSADCC_ENDRX	(1 << 18)	/* End of RX Buffer */
-+#define		AT91_TSADCC_RXBUFF	(1 << 19)	/* TX Buffer full */
-+#define		AT91_TSADCC_PENCNT	(1 << 20)	/* Pen contact */
-+#define		AT91_TSADCC_NOCNT	(1 << 21)	/* No contact */
-+
-+#define AT91_TSADCC_LCDR	0x20	/* Last Converted Data register */
-+#define		AT91_TSADCC_DATA	(0x3ff << 0)	/* Channel data */
-+
-+#define AT91_TSADCC_IER		0x24	/* Interrupt Enable register */
-+#define AT91_TSADCC_IDR		0x28	/* Interrupt Disable register */
-+#define AT91_TSADCC_IMR		0x2C	/* Interrupt Mask register */
-+#define AT91_TSADCC_CDR0	0x30	/* Channel Data 0 */
-+#define AT91_TSADCC_CDR1	0x34	/* Channel Data 1 */
-+#define AT91_TSADCC_CDR2	0x38	/* Channel Data 2 */
-+#define AT91_TSADCC_CDR3	0x3C	/* Channel Data 3 */
-+#define AT91_TSADCC_CDR4	0x40	/* Channel Data 4 */
-+#define AT91_TSADCC_CDR5	0x44	/* Channel Data 5 */
-+
-+#endif
-+
---- a/include/asm-arm/arch-at91/at91_wdt.h
-+++ b/include/asm-arm/arch-at91/at91_wdt.h
-@@ -1,6 +1,9 @@
- /*
-  * include/asm-arm/arch-at91/at91_wdt.h
-  *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Watchdog Timer (WDT) - System peripherals regsters.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
---- a/include/asm-arm/arch-at91/at91cap9.h
-+++ b/include/asm-arm/arch-at91/at91cap9.h
-@@ -101,7 +101,10 @@
- #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
- #define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
- #define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
--#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_GPBR	(cpu_is_at91cap9_revB() ? \
-+			(0xfffffd50 - AT91_BASE_SYS) : \
-+			(0xfffffd60 - AT91_BASE_SYS))
- 
- #define AT91_USART0	AT91CAP9_BASE_US0
- #define AT91_USART1	AT91CAP9_BASE_US1
-@@ -118,7 +121,7 @@
- #define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
- 
- #define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
--#define AT91CAP9_UDPHS_BASE	0x00600000	/* USB High Speed Device Port */
-+#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
- #define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
- 
- #define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
-@@ -0,0 +1,102 @@
-+/*
-+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
-+ *
-+ *  (C) 2008 Andrew Victor
-+ *
-+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
-+ * Based on AT91CAP9 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91CAP9_DDRSDR_H
-+#define AT91CAP9_DDRSDR_H
-+
-+#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
-+#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-+#define			AT91_DDRSDRC_MODE_NORMAL		0
-+#define			AT91_DDRSDRC_MODE_NOP		1
-+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-+#define			AT91_DDRSDRC_MODE_LMR		3
-+#define			AT91_DDRSDRC_MODE_REFRESH	4
-+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-+#define			AT91_DDRSDRC_MODE_DEEP		6
-+
-+#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
-+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-+
-+#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
-+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-+#define			AT91_DDRSDRC_NR_11	(0 << 2)
-+#define			AT91_DDRSDRC_NR_12	(1 << 2)
-+#define			AT91_DDRSDRC_NR_13	(2 << 2)
-+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-+#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-+
-+#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
-+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-+#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-+
-+#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
-+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-+
-+#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
-+#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-+#define			AT91_DDRSDRC_LPCB_DISABLE		0
-+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-+#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-+#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-+#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-+#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-+#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-+
-+#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
-+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-+#define			AT91_DDRSDRC_MD_SDR		0
-+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-+#define			AT91_DDRSDRC_MD_DDR		2
-+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-+
-+#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
-+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-+#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-+#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-+#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-+#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-+#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-+
-+
-+#endif
---- a/include/asm-arm/arch-at91/at91cap9_matrix.h
-+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
-@@ -106,6 +106,11 @@
- #define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
- #define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
- 
-+#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
-+#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
-+#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
-+#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
-+
- #define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
- #define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
- #define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
---- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
-+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
-@@ -1,6 +1,8 @@
- /*
-  * include/asm-arm/arch-at91/at91sam9260_matrix.h
-  *
-+ *  Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-  * Based on AT91SAM9260 datasheet revision B.
-  *
---- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
-+++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
-@@ -1,6 +1,8 @@
- /*
-  * include/asm-arm/arch-at91/at91sam9261_matrix.h
-  *
-+ *  Copyright (C) 2007 Atmel Corporation.
-+ *
-  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-  * Based on AT91SAM9261 datasheet revision D.
-  *
---- a/include/asm-arm/arch-at91/at91sam926x_mc.h
-+++ /dev/null
-@@ -1,141 +0,0 @@
--/*
-- * include/asm-arm/arch-at91/at91sam926x_mc.h
-- *
-- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
-- * Based on AT91SAM9261 datasheet revision D.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91SAM926x_MC_H
--#define AT91SAM926x_MC_H
--
--/* SDRAM Controller (SDRAMC) registers */
--#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
--#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
--#define			AT91_SDRAMC_MODE_NORMAL		0
--#define			AT91_SDRAMC_MODE_NOP		1
--#define			AT91_SDRAMC_MODE_PRECHARGE	2
--#define			AT91_SDRAMC_MODE_LMR		3
--#define			AT91_SDRAMC_MODE_REFRESH	4
--#define			AT91_SDRAMC_MODE_EXT_LMR	5
--#define			AT91_SDRAMC_MODE_DEEP		6
--
--#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
--#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
--
--#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
--#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
--#define			AT91_SDRAMC_NC_8	(0 << 0)
--#define			AT91_SDRAMC_NC_9	(1 << 0)
--#define			AT91_SDRAMC_NC_10	(2 << 0)
--#define			AT91_SDRAMC_NC_11	(3 << 0)
--#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
--#define			AT91_SDRAMC_NR_11	(0 << 2)
--#define			AT91_SDRAMC_NR_12	(1 << 2)
--#define			AT91_SDRAMC_NR_13	(2 << 2)
--#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
--#define			AT91_SDRAMC_NB_2	(0 << 4)
--#define			AT91_SDRAMC_NB_4	(1 << 4)
--#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
--#define			AT91_SDRAMC_CAS_1	(1 << 5)
--#define			AT91_SDRAMC_CAS_2	(2 << 5)
--#define			AT91_SDRAMC_CAS_3	(3 << 5)
--#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
--#define			AT91_SDRAMC_DBW_32	(0 << 7)
--#define			AT91_SDRAMC_DBW_16	(1 << 7)
--#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
--#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
--#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
--#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
--#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
--#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
--
--#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
--#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
--#define			AT91_SDRAMC_LPCB_DISABLE		0
--#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
--#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
--#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
--#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
--#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
--#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
--#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
--#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
--#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
--#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
--
--#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
--#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
--#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
--#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
--#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
--
--#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
--#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
--#define			AT91_SDRAMC_MD_SDRAM		0
--#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
--
--
--/* Static Memory Controller (SMC) registers */
--#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
--#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
--#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
--#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
--#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
--#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
--#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
--#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
--#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
--
--#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
--#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
--#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
--#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
--#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
--#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
--#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
--#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
--#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
--
--#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
--#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
--#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
--#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
--#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
--
--#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
--#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
--#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
--#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
--#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
--#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
--#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
--#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
--#define			AT91_SMC_BAT_SELECT		(0 << 8)
--#define			AT91_SMC_BAT_WRITE		(1 << 8)
--#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
--#define			AT91_SMC_DBW_8			(0 << 12)
--#define			AT91_SMC_DBW_16			(1 << 12)
--#define			AT91_SMC_DBW_32			(2 << 12)
--#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
--#define			AT91_SMC_TDF_(x)		((x) << 16)
--#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
--#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
--#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
--#define			AT91_SMC_PS_4			(0 << 28)
--#define			AT91_SMC_PS_8			(1 << 28)
--#define			AT91_SMC_PS_16			(2 << 28)
--#define			AT91_SMC_PS_32			(3 << 28)
--
--#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
--#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
--#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
--#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
--#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
--#endif
--
--#endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h
-@@ -0,0 +1,86 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9_sdramc.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9_SDRAMC_H
-+#define AT91SAM9_SDRAMC_H
-+
-+/* SDRAM Controller (SDRAMC) registers */
-+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-+#define			AT91_SDRAMC_MODE_NORMAL		0
-+#define			AT91_SDRAMC_MODE_NOP		1
-+#define			AT91_SDRAMC_MODE_PRECHARGE	2
-+#define			AT91_SDRAMC_MODE_LMR		3
-+#define			AT91_SDRAMC_MODE_REFRESH	4
-+#define			AT91_SDRAMC_MODE_EXT_LMR	5
-+#define			AT91_SDRAMC_MODE_DEEP		6
-+
-+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-+
-+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-+#define			AT91_SDRAMC_NC_8	(0 << 0)
-+#define			AT91_SDRAMC_NC_9	(1 << 0)
-+#define			AT91_SDRAMC_NC_10	(2 << 0)
-+#define			AT91_SDRAMC_NC_11	(3 << 0)
-+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-+#define			AT91_SDRAMC_NR_11	(0 << 2)
-+#define			AT91_SDRAMC_NR_12	(1 << 2)
-+#define			AT91_SDRAMC_NR_13	(2 << 2)
-+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-+#define			AT91_SDRAMC_NB_2	(0 << 4)
-+#define			AT91_SDRAMC_NB_4	(1 << 4)
-+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-+#define			AT91_SDRAMC_CAS_1	(1 << 5)
-+#define			AT91_SDRAMC_CAS_2	(2 << 5)
-+#define			AT91_SDRAMC_CAS_3	(3 << 5)
-+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-+#define			AT91_SDRAMC_DBW_32	(0 << 7)
-+#define			AT91_SDRAMC_DBW_16	(1 << 7)
-+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-+
-+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-+#define			AT91_SDRAMC_LPCB_DISABLE		0
-+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
-+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-+
-+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-+
-+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-+#define			AT91_SDRAMC_MD_SDRAM		0
-+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91sam9_smc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9_smc.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *  
-+ * Static Memory Controllers (SMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9_SMC_H
-+#define AT91SAM9_SMC_H
-+
-+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-+
-+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-+
-+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-+
-+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-+#define			AT91_SMC_BAT_SELECT		(0 << 8)
-+#define			AT91_SMC_BAT_WRITE		(1 << 8)
-+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-+#define			AT91_SMC_DBW_8			(0 << 12)
-+#define			AT91_SMC_DBW_16			(1 << 12)
-+#define			AT91_SMC_DBW_32			(2 << 12)
-+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-+#define			AT91_SMC_TDF_(x)		((x) << 16)
-+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-+#define			AT91_SMC_PS_4			(0 << 28)
-+#define			AT91_SMC_PS_8			(1 << 28)
-+#define			AT91_SMC_PS_16			(2 << 28)
-+#define			AT91_SMC_PS_32			(3 << 28)
-+
-+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
-+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-+#endif
-+
-+#endif
---- a/include/asm-arm/arch-at91/at91sam9rl.h
-+++ b/include/asm-arm/arch-at91/at91sam9rl.h
-@@ -110,6 +110,6 @@
- #define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
- 
- #define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
--#define AT91SAM9RL_UDPHS_BASE	0x00600000	/* USB Device HS controller */
-+#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
- 
- #endif
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -36,6 +36,7 @@
- #include <linux/i2c.h>
- #include <linux/leds.h>
- #include <linux/spi/spi.h>
-+#include <linux/usb/atmel_usba_udc.h>
- 
-  /* USB Device */
- struct at91_udc_data {
-@@ -45,6 +46,9 @@ struct at91_udc_data {
- };
- extern void __init at91_add_device_udc(struct at91_udc_data *data);
- 
-+ /* USB High Speed Device */
-+extern void __init at91_add_device_usba(struct usba_platform_data *data);
-+
-  /* Compact Flash */
- struct at91_cf_data {
- 	u8	irq_pin;		/* I/O IRQ */
-@@ -158,6 +162,9 @@ extern void __init at91_add_device_ac97(
-  /* ISI */
- extern void __init at91_add_device_isi(void);
- 
-+ /* Touchscreen Controller */
-+extern void __init at91_add_device_tsadcc(void);
-+
-  /* LEDs */
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
- extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
---- a/include/asm-arm/arch-at91/cpu.h
-+++ b/include/asm-arm/arch-at91/cpu.h
-@@ -48,6 +48,17 @@ static inline unsigned long at91_arch_id
- 	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
- }
- 
-+#ifdef CONFIG_ARCH_AT91CAP9
-+#include <asm/arch/at91_pmc.h>
-+
-+#define ARCH_REVISION_CAP9_B	0x399
-+#define ARCH_REVISION_CAP9_C	0x601
-+
-+static inline unsigned long at91cap9_rev_identify(void)
-+{
-+	return (at91_sys_read(AT91_PMC_VER));
-+}
-+#endif
- 
- #ifdef CONFIG_ARCH_AT91RM9200
- #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-@@ -83,8 +94,12 @@ static inline unsigned long at91_arch_id
- 
- #ifdef CONFIG_ARCH_AT91CAP9
- #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
-+#define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
-+#define cpu_is_at91cap9_revC()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
- #else
- #define cpu_is_at91cap9()	(0)
-+#define cpu_is_at91cap9_revB()	(0)
-+#define cpu_is_at91cap9_revC()	(0)
- #endif
- 
- /*
---- /dev/null
-+++ b/include/asm-arm/arch-at91/ics1523.h
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name           : ics1523.h
-+//* Object              : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED     : Creation
-+//* 1.2 13/01/03 FB	: Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition       */
-+/*-------------------------------------------*/
-+
-+#define		ICS_MIN_CLOCK		100		/* Min Frequency Access Clock KHz */
-+#define		ICS_MAX_CLOCK		400		/* Max Frequency Access Clock KHz */
-+#define		ICS_TRANSFER_RATE	ICS_MAX_CLOCK	/* Transfer speed to apply */
-+
-+#define		ICS_WRITE_CLK_PNB	30		/* TWCK Clock Periods required to write */
-+#define		ICS_READ_CLK_PNB	40		/* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition        */
-+/*-------------------------------------------*/
-+
-+#define		ICS1523_ACCESS_OK	0		/* OK */
-+#define		ICS1523_ACCESS_ERROR	-1		/* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition       */
-+/*-------------------------------------------*/
-+
-+#define		ICS_ADDR		0x26		/* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition  */
-+/*--------------------------------------------------*/
-+
-+#define		ICS_ICR			0x0		/* Input Control Register */
-+#define		ICS_LCR			0x1		/* Loop Control Register */
-+#define		ICS_FD0			0x2		/* PLL FeedBack Divider LSBs */
-+#define		ICS_FD1			0x3		/* PLL FeedBack Divider MSBs */
-+#define		ICS_DPAO		0x4		/* Dynamic Phase Aligner Offset */
-+#define		ICS_DPAC		0x5		/* Dynamic Phase Aligner Resolution */
-+#define		ICS_OE			0x6		/* Output Enables Register */
-+#define		ICS_OD			0x7		/* Osc Divider Register */
-+#define		ICS_SWRST		0x8		/* DPA & PLL Reset Register */
-+#define		ICS_VID			0x10		/* Chip Version Register */
-+#define		ICS_RID			0x11		/* Chip Revision Register */
-+#define		ICS_SR			0x12		/* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition       */
-+/*------------------------------------------------------*/
-+
-+#define		ICS_PDEN		0x1		/* Phase Detector Enable */
-+#define		ICS_PDPOL		0x2		/* Phase Detector Enable Polarity */
-+#define		ICS_REFPOL		0x4		/* External Reference Polarity */
-+#define		ICS_FBKPOL		0x8		/* External Feedback Polarity */
-+#define		ICS_FBKSEL		0x10		/* External Feedback Select */
-+#define		ICS_FUNCSEL		0x20		/* Function Out Select */
-+#define		ICS_ENPLS		0x40		/* Enable PLL Lock/Ref Status Output */
-+#define		ICS_ENDLS		0x80		/* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition       */
-+/*-----------------------------------------------------*/
-+
-+#define		ICS_PFD			0x7		/* Phase Detector Gain */
-+#define		ICS_PSD			0x30		/* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_FBDL		0xFF		/* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_FBDM		0xF		/* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition       */
-+/*------------------------------------------------------------*/
-+
-+#define		ICS_DPAOS		0x2F		/* Dynamic Phase Aligner Offset */
-+#define		ICS_FILSEL		0x80		/* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition       */
-+/*----------------------------------------------------------------*/
-+
-+#define		ICS_DPARES		0x3		/* Dynamic Phase Aligner Resolution */
-+#define		ICS_MMREV		0xFC		/* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition       */
-+/*-------------------------------------------------------*/
-+
-+#define		ICS_OEPCK		0x1		/* Output Enable for PECL PCLK Outputs */
-+#define		ICS_OETCK		0x2		/* Output Enable for STTL CLK Output */
-+#define		ICS_OEP2		0x4		/* Output Enable for PECL CLK/2 Outputs */
-+#define		ICS_OET2		0x8		/* Output Enable for STTL CLK/2 Output */
-+#define		ICS_OEF			0x10		/* Output Enable for STTL FUNC Output */
-+#define		ICS_CLK2INV		0x20		/* CLK/2 Invert */
-+#define		ICS_OSCL		0xC0		/* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_OSCDIV		0x7F		/* Oscillator Divider Modulus */
-+#define		ICS_INSEL		0x80		/* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition       */
-+/*---------------------------------------------------*/
-+
-+#define		ICS_DPAR		0x0A		/* DPA Reset Command */
-+#define		ICS_PLLR		0x50		/* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition       */
-+/*------------------------------------------------*/
-+
-+#define		ICS_CHIPV		0xFF		/* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition       */
-+/*-------------------------------------------------*/
-+
-+#define		ICS_CHIPR		0xFF		/* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition       */
-+/*------------------------------------------*/
-+
-+#define		ICS_DPALOCK		0x1		/* DPA Lock Status */
-+#define		ICS_PLLLOCK		0x2		/* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
---- /dev/null
-+++ b/include/asm-arm/arch-at91/spi.h
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR		153	/* registered device number */
-+
-+#define DEFAULT_SPI_CLK		6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ *  DataFlash uses maximum of 2
-+ *  spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS	8
-+#define NR_SPI_DEVICES		4	/* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+	void* tx[MAX_SPI_TRANSFERS];	/* transmit */
-+	int txlen[MAX_SPI_TRANSFERS];
-+	void* rx[MAX_SPI_TRANSFERS];	/* receive */
-+	int rxlen[MAX_SPI_TRANSFERS];
-+	int nr_transfers;		/* number of transfers */
-+	int curr;			/* current transfer */
-+};
-+
-+struct spi_local {
-+	unsigned int pcs;		/* Peripheral Chip Select value */
-+
-+	struct spi_transfer_list *xfers;	/* current transfer list */
-+	dma_addr_t tx, rx;		/* DMA address for current transfer */
-+	dma_addr_t txnext, rxnext;	/* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
---- a/include/asm-arm/arch-at91/timex.h
-+++ b/include/asm-arm/arch-at91/timex.h
-@@ -27,14 +27,29 @@
- 
- #define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
- 
--#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
-+#elif defined(CONFIG_ARCH_AT91SAM9260)
-+
-+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-+#define AT91SAM9_MASTER_CLOCK	90000000
-+#else
-+#define AT91SAM9_MASTER_CLOCK	99300000
-+#endif
-+
-+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-+
-+#elif defined(CONFIG_ARCH_AT91SAM9261)
- 
- #define AT91SAM9_MASTER_CLOCK	99300000
- #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
- 
- #elif defined(CONFIG_ARCH_AT91SAM9263)
- 
-+#if defined(CONFIG_MACH_USB_A9263)
-+#define AT91SAM9_MASTER_CLOCK	90000000
-+#else
- #define AT91SAM9_MASTER_CLOCK	99959500
-+#endif
-+
- #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
- 
- #elif defined(CONFIG_ARCH_AT91SAM9RL)
---- a/include/asm-arm/arch-ks8695/devices.h
-+++ b/include/asm-arm/arch-ks8695/devices.h
-@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan
- extern void __init ks8695_add_device_lan(void);
- extern void __init ks8695_add_device_hpna(void);
- 
-+ /* LEDs */
-+extern short ks8695_leds_cpu;
-+extern short ks8695_leds_timer;
-+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-+
-  /* PCI */
- #define KS8695_MODE_PCI		0
- #define KS8695_MODE_MINIPCI	1
---- a/include/linux/clk.h
-+++ b/include/linux/clk.h
-@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru
-  */
- struct clk *clk_get_parent(struct clk *clk);
- 
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active.  A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
---- a/include/linux/i2c-id.h
-+++ b/include/linux/i2c-id.h
-@@ -131,6 +131,7 @@
- 
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT		0x1a0001 /* generic platform_bus interface */
- 
- /* --- PowerPC on-chip adapters						*/
- #define I2C_HW_OCP		0x120000 /* IBM on-chip I2C adapter */
---- /dev/null
-+++ b/include/linux/usb/atmel_usba_udc.h
-@@ -0,0 +1,23 @@
-+/*
-+* Platform data definitions for Atmel USBA gadget driver.
-+*/
-+#ifndef __LINUX_USB_USBA_H
-+#define __LINUX_USB_USBA_H
-+
-+struct usba_ep_data {
-+	char*	name;
-+	int	index;
-+	int	fifo_size;
-+	int	nr_banks;
-+	int	can_dma;
-+	int	can_isoc;
-+};
-+
-+struct usba_platform_data {
-+	int			vbus_pin;
-+	int			num_ep;
-+	struct usba_ep_data	ep[0];
-+};
-+
-+#endif /* __LINUX_USB_USBA_H */
-+
---- a/include/video/atmel_lcdc.h
-+++ b/include/video/atmel_lcdc.h
-@@ -39,6 +39,7 @@ struct atmel_lcdfb_info {
- 	u8			bl_power;
- #endif
- 	bool			lcdcon_is_backlight;
-+	u8			saved_lcdcon;
- 
- 	u8			default_bpp;
- 	unsigned int		default_lcdcon2;
---- a/sound/soc/at91/eti_b1_wm8731.c
-+++ b/sound/soc/at91/eti_b1_wm8731.c
-@@ -33,8 +33,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
- 
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
- 
- #include "../codecs/wm8731.h"
-@@ -47,13 +46,6 @@
- #define	DBG(x...)
- #endif
- 
--#define AT91_PIO_TF1	(1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1	(1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1	(1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1	(1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1	(1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1	(1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
- 
-@@ -276,7 +268,6 @@ static struct platform_device *eti_b1_sn
- static int __init eti_b1_init(void)
- {
- 	int ret;
--	u32 ssc_pio_lines;
- 	struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
- 
- 	if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -310,19 +301,12 @@ static int __init eti_b1_init(void)
- 		goto fail_io_unmap;
- 	}
- 
-- 	ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
--			| AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
--	/* Reset all PIO registers and assign lines to peripheral A */
-- 	at91_sys_write(AT91_PIOB + PIO_PDR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_ODR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_IDR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_ASR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ 	at91_set_A_periph(AT91_PIN_PB6, 0);	/* TF1 */
-+ 	at91_set_A_periph(AT91_PIN_PB7, 0);	/* TK1 */
-+ 	at91_set_A_periph(AT91_PIN_PB8, 0);	/* TD1 */
-+ 	at91_set_A_periph(AT91_PIN_PB9, 0);	/* RD1 */
-+/* 	at91_set_A_periph(AT91_PIN_PB10, 0);*/	/* RK1 */
-+ 	at91_set_A_periph(AT91_PIN_PB11, 0);	/* RF1 */
- 
- 	/*
- 	 * Set PCK1 parent to PLLB and its rate to 12 Mhz.
---- a/sound/spi/at73c213.c
-+++ b/sound/spi/at73c213.c
-@@ -114,7 +114,11 @@ snd_at73c213_write_reg(struct snd_at73c2
- static struct snd_pcm_hardware snd_at73c213_playback_hw = {
- 	.info		= SNDRV_PCM_INFO_INTERLEAVED |
- 			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+#ifdef __BIG_ENDIAN
- 	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
-+#else
-+	.formats	= SNDRV_PCM_FMTBIT_S16_LE,
-+#endif
- 	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
- 	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
- 	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
diff --git a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch b/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
deleted file mode 100644
index 76e3698..0000000
--- a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
+++ /dev/null
@@ -1,229 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -151,6 +151,12 @@ config MACH_TT9200
- 	help
- 	  Select this if you are using Toptech's TT9200 board.
- 
-+config MACH_VLINK
-+	bool "Figment Design Labs VersaLink"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using FDL's VersaLink board
-+
- endif
- 
- # ----------------------------------------------------------
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb920
- obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
- obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
- obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
-+obj-$(CONFIG_MACH_VLINK)	+= board-vlink.o
- obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
- obj-$(CONFIG_MACH_HOMEMATIC)	+= board-homematic.o
- obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
---- /dev/null
-+++ b/arch/arm/mach-at91/board-vlink.c
-@@ -0,0 +1,201 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-vlink.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2006,2007 Guthrie Consulting
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init vlink_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
-+
-+	/* Setup serial ports */
-+	
-+	/* DBGU on ttyS0. (RX and TX only) */
-+	at91_register_uart(0, 0, 0);
-+
-+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS 
-+			| ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR
-+			| ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+	/* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS
-+			| ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+	/* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
-+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS
-+			| ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+	/* USART2 on ttyS4. (Rx and Tx only) */
-+	at91_register_uart(AT91RM9200_ID_US2, 4, 0);
-+
-+	/* Console on ttyS0 (ie DBGU) */
-+	at91_set_serial_console(0);
-+}
-+
-+static void __init vlink_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata vlink_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PC4,
-+	.is_rmii	= 1,
-+};
-+
-+static struct at91_usbh_data __initdata vlink_usbh_data = {
-+	.ports		= 1,
-+};
-+
-+/*
-+static struct at91_udc_data __initdata vlink_udc_data = {
-+	.vbus_pin	= AT91_PIN_PD4,
-+	.pullup_pin	= AT91_PIN_PD5,
-+};
-+*/
-+
-+static struct at91_mmc_data __initdata vlink_mmc_data = {
-+//	.det_pin	= AT91_PIN_PB27,
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+//	.wp_pin		= AT91_PIN_PA17,
-+};
-+
-+static struct spi_board_info vlink_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	{	/* DataFlash card */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 3,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+#endif
-+};
-+
-+/*static struct at91_gpio_led vlink_leds[] = {
-+	{
-+		.name		= "led0",
-+		.gpio		= AT91_PIN_PC14,
-+		.trigger	= "heartbeat",
-+	},
-+	{
-+		.name		= "led1",
-+		.gpio		= AT91_PIN_PC15,
-+		.trigger	= "timer",
-+	}
-+};
-+*/
-+
-+static void __init vlink_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* Ethernet */
-+	at91_add_device_eth(&vlink_eth_data);
-+	/* USB Host */
-+	at91_add_device_usbh(&vlink_usbh_data);
-+	/* USB Device */
-+//	at91_add_device_udc(&vlink_udc_data);
-+//	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-+	/* I2C */
-+//	at91_add_device_i2c();
-+	/* SPI */
-+	at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	/* DataFlash card */
-+//	at91_set_gpio_output(AT91_PIN_PB22, 0);
-+#else
-+	/* MMC */
-+//	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-+	at91_add_device_mmc(0, &vlink_mmc_data);
-+#endif
-+	/* LEDs */
-+//	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-+
-+/* Other LED's */
-+       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
-+       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
-+       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-+       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-+       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-+       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+
-+/* SIM Cards */
-+       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
-+       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-+       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
-+
-+/* GSM Module Control */
-+       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-+
-+/* Test jig presence detection */
-+       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
-+
-+/* Power indicator */
-+       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
-+
-+/* USB Device control */
-+       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
-+       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
-+
-+}
-+
-+MACHINE_START(VLINK, "FDL VersaLink")
-+	/* Maintainer: Guthrie Consulting */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= vlink_map_io,
-+	.init_irq	= vlink_init_irq,
-+	.init_machine	= vlink_board_init,
-+MACHINE_END
diff --git a/target/linux/at91/patches-2.6.25/002-led-driver.patch b/target/linux/at91/patches-2.6.25/002-led-driver.patch
deleted file mode 100644
index 595720d..0000000
--- a/target/linux/at91/patches-2.6.25/002-led-driver.patch
+++ /dev/null
@@ -1,167 +0,0 @@
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -717,6 +717,26 @@ static void __init at91_add_device_watch
- static void __init at91_add_device_watchdog(void) {}
- #endif
- 
-+/* --------------------------------------------------------------------
-+ *  LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+u8 at91_leds_cpu;
-+u8 at91_leds_timer;
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+	/* Enable GPIO to access the LEDs */
-+	at91_set_gpio_output(cpu_led, 1);
-+	at91_set_gpio_output(timer_led, 1);
-+
-+	at91_leds_cpu   = cpu_led;
-+	at91_leds_timer = timer_led;
-+}
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
- 
- /* --------------------------------------------------------------------
-  *  SSC -- Synchronous Serial Controller
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -60,7 +60,12 @@ obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-
- obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
- 
- # Drivers
--obj-y				+= leds.o
-+ifeq ($(CONFIG_MACH_VLINK),y)
-+led-$(CONFIG_MACH_VLINK)	+= vlink_leds.o
-+else
-+led-y				+= leds.o
-+endif
-+obj-y				+= $(led-y)
- obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
- 
- # Power Management
---- /dev/null
-+++ b/arch/arm/mach-at91/vlink_leds.c
-@@ -0,0 +1,105 @@
-+/*
-+ * LED driver for Atmel AT91-based boards.
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *	Modified for FDL VersaLink Copyright (C) Guthrie Consulting
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/leds.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+
-+static inline void at91_led_on(unsigned int led)
-+{
-+	at91_set_gpio_value(led, 0);
-+}
-+
-+static inline void at91_led_off(unsigned int led)
-+{
-+	at91_set_gpio_value(led, 1);
-+}
-+
-+static inline void at91_led_toggle(unsigned int led)
-+{
-+	unsigned long is_off = at91_get_gpio_value(led);
-+	if (is_off) {
-+		at91_led_on(led);
-+		at91_led_off(at91_leds_cpu);
-+		}
-+	else {
-+		at91_led_on(at91_leds_cpu);
-+		at91_led_off(led);
-+		}
-+}
-+
-+
-+/*
-+ * Handle LED events.
-+ */
-+
-+/*
-+ * VersaLink has a single bi-coloured LED which changes colour when the
-+ * polarity is reversed
-+ */
-+static void at91_leds_event(led_event_t evt)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	switch(evt) {
-+	case led_start:		/* System startup */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+	case led_stop:		/* System stop / suspend */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+	case led_timer:		/* Every 50 timer ticks */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+	case led_idle_start:	/* Entering idle state */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+	case led_idle_end:	/* Exit idle state */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+#endif
-+
-+	default:
-+		break;
-+	}
-+
-+	local_irq_restore(flags);
-+}
-+
-+
-+static int __init leds_init(void)
-+{
-+	if (!at91_leds_timer || !at91_leds_cpu)
-+		return -ENODEV;
-+
-+	leds_event = at91_leds_event;
-+
-+	leds_event(led_start);
-+	return 0;
-+}
-+
-+__initcall(leds_init);
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -162,6 +162,11 @@ extern void __init at91_add_device_ac97(
-  /* ISI */
- extern void __init at91_add_device_isi(void);
- 
-+ /* LEDs */
-+extern u8 at91_leds_cpu;
-+extern u8 at91_leds_timer;
-+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-+
-  /* Touchscreen Controller */
- extern void __init at91_add_device_tsadcc(void);
- 
diff --git a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
deleted file mode 100644
index 3968c6b..0000000
--- a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
+++ /dev/null
@@ -1,546 +0,0 @@
---- a/arch/arm/mach-at91/board-vlink.c
-+++ b/arch/arm/mach-at91/board-vlink.c
-@@ -99,7 +99,7 @@ static struct at91_udc_data __initdata v
- */
- 
- static struct at91_mmc_data __initdata vlink_mmc_data = {
--//	.det_pin	= AT91_PIN_PB27,
-+//	.det_pin	= AT91_PIN_PC10,
- 	.slot_b		= 0,
- 	.wire4		= 1,
- //	.wp_pin		= AT91_PIN_PA17,
-@@ -136,6 +136,7 @@ static struct spi_board_info vlink_spi_d
- 
- static void __init vlink_board_init(void)
- {
-+	int v100;
- 	/* Serial */
- 	at91_add_device_serial();
- 	/* Ethernet */
-@@ -157,36 +158,66 @@ static void __init vlink_board_init(void
- //	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
- 	at91_add_device_mmc(0, &vlink_mmc_data);
- #endif
-+
-+// Set VLink version PIN as an input with pull-up (V1.5 = GND)
-+	at91_set_gpio_input(AT91_PIN_PC2, 1);
-+	v100 = at91_get_gpio_value(AT91_PIN_PC2);
-+
- 	/* LEDs */
- //	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
- 
- /* Other LED's */
--       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
--       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
--       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
--       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
--       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
--       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+	at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
-+	at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
-+	at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-+	at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-+	at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-+	at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+
-+/* Test jig presence detection */
-+	at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
- 
- /* SIM Cards */
--       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
--       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
--       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
-+	if (at91_get_gpio_value(AT91_PIN_PB8)) {
-+		at91_set_gpio_output(AT91_PIN_PB11, 0);
-+		if (v100)
-+			at91_set_gpio_output(AT91_PIN_PB9, 1);
-+		else
-+			at91_set_gpio_output(AT91_PIN_PC13, 1);
-+	} else {
-+		at91_set_gpio_output(AT91_PIN_PB11, 1);
-+		if (v100)
-+			at91_set_gpio_output(AT91_PIN_PB9, 0);
-+		else
-+			at91_set_gpio_output(AT91_PIN_PC13, 0);
-+	}
- 
--/* GSM Module Control */
--       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-+        at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
- 
--/* Test jig presence detection */
--       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
-+/* GSM Module Control */
-+	at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
- 
- /* Power indicator */
--       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
-+	at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
- 
- /* USB Device control */
--       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
--       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
--			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
--
-+	at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
-+	at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+	at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
-+
-+/* USB Power controls */
-+
-+	if (v100)
-+	{       // V100
-+		at91_set_gpio_input (AT91_PIN_PC12, 1);   // SD Card present
-+	}
-+	else
-+	{       // DO special things for V1.5
-+		at91_set_gpio_output(AT91_PIN_PB9 , 0);   // USB suspend
-+		at91_set_gpio_input (AT91_PIN_PC10, 1);   // SD Card present
-+		at91_set_gpio_output(AT91_PIN_PC11, 0);   // USB Vin CTRL for modules onboard
-+		at91_set_gpio_output(AT91_PIN_PC12, 0);   // SIM control
-+	}
- }
- 
- MACHINE_START(VLINK, "FDL VersaLink")
---- a/arch/arm/mach-at91/gpio.c
-+++ b/arch/arm/mach-at91/gpio.c
-@@ -29,6 +29,7 @@
- 
- static struct at91_gpio_bank *gpio;
- static int gpio_banks;
-+static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 };
- 
- 
- static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
-+
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- 	__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
- 
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- 	__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
- 
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + PIO_PUDR);
- 	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
- }
- EXPORT_SYMBOL(at91_get_gpio_value);
- 
-+int at91_is_pin_gpio(unsigned pin)
-+{
-+	void __iomem  *pio = pin_to_controller(pin);
-+	unsigned  mask = pin_to_mask(pin);
-+	int     bank = (pin - PIN_BASE) / 32;
-+
-+	if (!pio)
-+		return -EINVAL;
-+	return (pio_gpio_pin[bank] & mask) != 0;
-+}
-+EXPORT_SYMBOL(at91_is_pin_gpio);
-+
- /*--------------------------------------------------------------------------*/
- 
- #ifdef CONFIG_PM
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1072,5 +1072,12 @@ config AT91_SPIDEV
- 	  The SPI driver gives user mode access to this serial
- 	  bus on the AT91RM9200 processor.
- 
-+config AT91_VLIO
-+	tristate "Versalink LED and GPIO interface"
-+	depends on ARCH_AT91RM9200 && MACH_VLINK
-+	default n
-+	help
-+	  Provides a handler GPIO's in userspace
-+
- endmenu
- 
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
- obj-$(CONFIG_TELCLOCK)		+= tlclk.o
- obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
- obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
-+obj-$(CONFIG_AT91_VLIO)		+= vlink_giu.o
- 
- obj-$(CONFIG_MWAVE)		+= mwave/
- obj-$(CONFIG_AGP)		+= agp/
---- /dev/null
-+++ b/drivers/char/vlink_giu.c
-@@ -0,0 +1,333 @@
-+/*
-+ *  Driver for FDL Versalink GPIO
-+ *
-+ *  Copyright (C) 2005 Guthrie Consulting
-+ *	Author: Hamish Guthrie <hamish@prodigi.ch>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fcntl.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/uaccess.h>
-+
-+static int major;	/* default is dynamic major device number */
-+module_param(major, int, 0);
-+MODULE_PARM_DESC(major, "Major device number");
-+
-+#define VIO_NR_DEVS	96
-+
-+struct vio_dev {
-+	struct cdev cdev;
-+};
-+
-+struct vio_dev *vio_devices;
-+static struct class *vio_class;
-+
-+#define MAX_VIO_NAMES	24
-+typedef struct
-+{
-+	char port;
-+	char pin;
-+	char name100[10];
-+	char name150[10];
-+} VIO_NAMES;
-+
-+VIO_NAMES VioName[MAX_VIO_NAMES] = 
-+{ 	// Port, Pin, V100, V150
-+	{'A',19,"port1DTR" ,"port1DTR"},
-+	{'A',24,"port2DTR" ,"port2DTR"},
-+	{'B',8, "jigOn"    ,"jigOn"} ,
-+	{'B',9, "enbSC3"   ,"usbSUSPND"},
-+	{'B',10,"enbSC2"   ,"enbSC2"},
-+	{'B',11,"enbSC1"   ,"enbSC1"},
-+	{'B',12,"gsmONOFF" ,"gsmONOFF"},
-+	{'B',14,"ledBAP1"  ,"ledBAP1"},
-+	{'B',15,"ledBBP1"  ,"ledBBP1"},
-+	{'B',16,"ledBAP2"  ,"ledBAP2"},
-+	{'B',17,"ledBBP2"  ,"ledBBP2"},
-+	{'B',27,"udpCNX"   ,"udpCNX"},
-+	{'B',28,"udpPUP"   ,"udpPUP"},
-+	{'B',29,"port2DCD" ,"port2DCD"},
-+	{'C',2, "vlVer100" ,"vlVer150"},
-+	{'C',7, "ledFAP1"  ,"ledFAP1"},
-+	{'C',8, "ledFBP1"  ,"ledFBP1"},
-+	{'C',10,"vioC10"   ,"sdCardON"},
-+	{'C',11,"vioC11"   ,"vusbCTRL"},
-+	{'C',12,"sdCardON" ,"simCTRL"},
-+	{'C',13,"vioC13"   ,"enbSC3"},
-+	{'C',14,"ledFBP2"  ,"ledFBP2"},
-+	{'C',15,"ledFAP2"  ,"ledFAP2"},
-+	{0,0,"",""}
-+};
-+
-+/*
-+{'B',18,"gsmRIO"  ,"gsmRIO"},
-+{'B',20,"gsmTX"   ,"gsmTX"},
-+{'B',21,"gsmRX"   ,"gsmRX"},
-+{'B',22,"gsmPIND" ,"gsmPIND"},
-+{'B',23,"gsmDCD"  ,"gsmDCD"},
-+{'B',24,"gsmCTS"  ,"gsmCTS"},
-+{'B',25,"gsmDSR"  ,"gsmDSR"},
-+{'B',26,"gsmRTS"  ,"gsmRTS"},
-+*/
-+static void lookupPINName(char version100, char *devName, char port, char pin);
-+// EOF KWJ + AJE
-+
-+static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
-+                         loff_t *ppos)
-+{
-+	unsigned int pin;
-+	int retval;
-+	char value = '0';
-+
-+	pin = iminor(file->f_dentry->d_inode);
-+
-+	retval = at91_get_gpio_value(PIN_BASE + pin);
-+	if (retval < 0)
-+		return -EFAULT;
-+
-+	value = retval + 0x30;
-+	if (put_user(value, buf))
-+		return -EFAULT;
-+
-+	return 1;
-+}
-+
-+static ssize_t gpio_write(struct file *file, const char __user *data,
-+                          size_t len, loff_t *ppos)
-+{
-+	unsigned int pin;
-+	size_t i;
-+	char c;
-+	int retval = 0;
-+
-+	pin = iminor(file->f_dentry->d_inode);
-+
-+	for (i = 0; i < len; i++) {
-+		if (get_user(c, data + i))
-+			return -EFAULT;
-+
-+		switch (c) {
-+		case '0':
-+		case '1':
-+			retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30);
-+			if (retval < 0)
-+				return -EFAULT;
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		if (retval < 0)
-+			break;
-+	}
-+
-+	return i;
-+}
-+
-+static int gpio_open(struct inode *inode, struct file *file)
-+{
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int gpio_release(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static struct file_operations vio_fops = {
-+	.owner		= THIS_MODULE,
-+	.read		= gpio_read,
-+	.write		= gpio_write,
-+	.open		= gpio_open,
-+	.release	= gpio_release,
-+};
-+
-+static void vio_setup_cdev(struct vio_dev *dev, int index)
-+{
-+	int err, devno = MKDEV(major, index);
-+
-+	cdev_init(&dev->cdev, &vio_fops);
-+	dev->cdev.owner = THIS_MODULE;
-+	dev->cdev.ops = &vio_fops;
-+	err = cdev_add (&dev->cdev, devno, 1);
-+	if (err)
-+		printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index);
-+}
-+
-+static int vio_remove(struct platform_device *dev)
-+{
-+	int i;
-+	dev_t devno = MKDEV(major, 0);
-+
-+	if (vio_devices) {
-+		for(i=0; i<VIO_NR_DEVS; i++) {
-+			int iodev = at91_is_pin_gpio(PIN_BASE + i);
-+			if (iodev) {
-+				cdev_del(&vio_devices[i].cdev);
-+				class_device_destroy(vio_class, MKDEV(major, i));
-+			}
-+		}
-+		kfree(vio_devices);
-+	}
-+
-+	class_destroy(vio_class);
-+	unregister_chrdev_region(devno, VIO_NR_DEVS);
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	return 0;
-+}
-+
-+static int vio_probe(struct platform_device *dev)
-+{
-+	int retval, i, j;
-+	dev_t vdev = 0;
-+	char devName[30];
-+	int vlinkV100;
-+
-+	if (major) {
-+		vdev = MKDEV(major, 0);
-+		retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio");
-+	} else {
-+		retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio");
-+		major = MAJOR(vdev);
-+	}
-+	if (retval < 0) {
-+		printk(KERN_WARNING "vio: can't get major %d\n", major);
-+		return retval;
-+	}
-+
-+	if (major == 0) {
-+		major = retval;
-+		printk(KERN_INFO "vio: major number %d\n", major);
-+	}
-+
-+	vio_class = class_create(THIS_MODULE, "vio");
-+
-+	if (IS_ERR(vio_class)) {
-+		printk(KERN_ERR "vio: Error creating vio class\n");
-+		vio_remove(dev);
-+		return PTR_ERR(vio_class);
-+	}
-+
-+	vlinkV100 = at91_get_gpio_value(AT91_PIN_PC2); // Denotes V1.5 if GND
-+
-+	vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
-+	if (!vio_devices) {
-+		retval = -ENOMEM;
-+		goto fail;
-+	}
-+	memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev));
-+
-+	for (i=0; i<VIO_NR_DEVS/32; i++)
-+		for(j=0; j<32; j++) {
-+			int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
-+			if (iodev) {
-+				vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
-+				// Lookup name of vio to create
-+				lookupPINName(vlinkV100, devName, i, j);
-+				class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL, devName);
-+			}
-+		}
-+
-+	platform_set_drvdata(dev, vio_devices);
-+
-+	return 0;
-+
-+fail:
-+	vio_remove(dev);
-+	return retval;
-+}
-+
-+static void lookupPINName(char version100, char *devName, char port, char pin)
-+{
-+	int i = -1;
-+	char found = 0;
-+	while (!found)
-+	{
-+		i++;
-+		if (i >= MAX_VIO_NAMES)
-+			break;
-+		if (VioName[i].port == port+'A' && VioName[i].pin == pin)
-+		{
-+			printk(KERN_ERR "vio++: %c%d=%s\n",VioName[i].port,VioName[i].pin,VioName[i].name150);
-+			if (version100)
-+				strcpy(devName, VioName[i].name100);
-+			else
-+				strcpy(devName, VioName[i].name150);
-+			found = 1;
-+		}
-+	}
-+	if (!found)
-+		sprintf(devName, "vio%c%d", port + 'A', pin);
-+}
-+	
-+static struct platform_device *vio_platform_device;
-+
-+static struct platform_driver vio_driver = {
-+	.probe 		= vio_probe,
-+	.remove		= vio_remove,
-+	.driver		= {
-+		.name	= "vio",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init vio_init(void)
-+{
-+	int retval;
-+
-+	vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0);
-+	if (IS_ERR(vio_platform_device)) {
-+		printk(KERN_WARNING "vio: device registration failed\n");
-+		return PTR_ERR(vio_platform_device);
-+	}
-+
-+	retval = platform_driver_register(&vio_driver);
-+	if (retval < 0) {
-+		printk(KERN_WARNING "vio: driver registration failed\n");
-+		platform_device_unregister(vio_platform_device);
-+	}
-+	
-+	return retval;
-+}
-+
-+static void __exit vio_exit(void)
-+{
-+	platform_driver_unregister(&vio_driver);
-+	platform_device_unregister(vio_platform_device);
-+}
-+
-+module_init(vio_init);
-+module_exit(vio_exit);
-+
-+MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
-+MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
---- a/include/asm-arm/arch-at91/gpio.h
-+++ b/include/asm-arm/arch-at91/gpio.h
-@@ -199,6 +199,7 @@ extern int __init_or_module at91_set_mul
- /* callable at any time */
- extern int at91_set_gpio_value(unsigned pin, int value);
- extern int at91_get_gpio_value(unsigned pin);
-+extern int at91_is_pin_gpio(unsigned pin);
- 
- /* callable only from core power-management code */
- extern void at91_gpio_suspend(void);
diff --git a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch b/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
deleted file mode 100644
index 503c892..0000000
--- a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/drivers/mtd/devices/at91_dataflash.c
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -175,7 +175,7 @@ static struct mtd_partition static_parti
- };
- #endif
- 
--static const char *part_probes[] = { "cmdlinepart", NULL, };
-+static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, };
- 
- #endif
- 
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -168,6 +168,12 @@ config MTD_OF_PARTS
- 	  the partition map from the children of the flash node,
- 	  as described in Documentation/powerpc/booting-without-of.txt.
- 
-+config MTD_AT91_PARTS
-+	tristate "Atmel AT91 partitioning support"
-+	depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI
-+	---help---
-+	  Atmel AT91 partitioning support
-+	
- comment "User Modules And Translation Layers"
- 
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
-+obj-$(CONFIG_MTD_AT91_PARTS)   += at91part.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch b/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
deleted file mode 100644
index cf11ac0..0000000
--- a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
+++ /dev/null
@@ -1,161 +0,0 @@
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -214,6 +214,34 @@ static void atmel_set_mctrl(struct uart_
- 				at91_set_gpio_value(AT91_PIN_PA21, 0);
- 			else
- 				at91_set_gpio_value(AT91_PIN_PA21, 1);
-+
-+			/*
-+ 			 * FDL VersaLink adds GPIOS to provide full modem 
-+			 * control on USART 0 - Drive DTR and RI pins manually
-+ 			 */
-+			if (mctrl & TIOCM_DTR)
-+				at91_set_gpio_value(AT91_PIN_PB6, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB6, 1);
-+			if (mctrl & TIOCM_RI)
-+				at91_set_gpio_value(AT91_PIN_PB7, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB7, 1);
-+		}
-+
-+		/*
-+		 * FDL VersaLink adds GPIOS to provide full modem control on
-+		 * USART 3 - Drive DTR and RI pins manually
-+		 */
-+		if (port->mapbase == AT91RM9200_BASE_US3) {
-+			if (mctrl & TIOCM_DTR)
-+				at91_set_gpio_value(AT91_PIN_PB29, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB29, 1);
-+			if (mctrl & TIOCM_RI)
-+				at91_set_gpio_value(AT91_PIN_PB2, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB2, 1);
- 		}
- 	}
- #endif
-@@ -251,8 +279,10 @@ static u_int atmel_get_mctrl(struct uart
- 	/*
- 	 * The control signals are active low.
- 	 */
--	if (!(status & ATMEL_US_DCD))
--		ret |= TIOCM_CD;
-+
-+	if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
-+		if (!(status & ATMEL_US_DCD))
-+			ret |= TIOCM_CD;
- 	if (!(status & ATMEL_US_CTS))
- 		ret |= TIOCM_CTS;
- 	if (!(status & ATMEL_US_DSR))
-@@ -260,6 +290,16 @@ static u_int atmel_get_mctrl(struct uart
- 	if (!(status & ATMEL_US_RI))
- 		ret |= TIOCM_RI;
- 
-+	/*
-+ 	 * Read the GPIO's for the FDL VersaLink special case
-+	 */
-+	if (port->mapbase == AT91RM9200_BASE_US0)
-+		if (!(at91_get_gpio_value(AT91_PIN_PA19)))
-+			ret |= TIOCM_CD;
-+	if (port->mapbase == AT91RM9200_BASE_US3)
-+		if (!(at91_get_gpio_value(AT91_PIN_PA24)))
-+			ret |= TIOCM_CD;
-+
- 	return ret;
- }
- 
-@@ -453,6 +493,34 @@ static void atmel_tx_chars(struct uart_p
- }
- 
- /*
-+ * USART0 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
-+{
-+	struct uart_port *port = dev_id;
-+	int status = at91_get_gpio_value(irq);
-+
-+	uart_handle_dcd_change(port, !(status));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * USART3 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
-+{
-+	struct uart_port *port = dev_id;
-+	int status = at91_get_gpio_value(irq);
-+
-+	uart_handle_dcd_change(port, !(status));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-  * receive interrupt handler.
-  */
- static void
-@@ -815,6 +883,23 @@ static int atmel_startup(struct uart_por
- 		return retval;
- 	}
- 
-+        if (port->mapbase == AT91RM9200_BASE_US0) {
-+                retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
-+                if (retval) {
-+                        printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
-+                        free_irq(port->irq, port);
-+                        return retval;
-+                }
-+        }
-+        if (port->mapbase == AT91RM9200_BASE_US3) {
-+                retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
-+                if (retval) {
-+                        printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
-+                        free_irq(port->irq, port);
-+                        return retval;
-+                }
-+        }
-+
- 	/*
- 	 * Initialize DMA (if necessary)
- 	 */
-@@ -834,6 +919,10 @@ static int atmel_startup(struct uart_por
- 					kfree(atmel_port->pdc_rx[0].buf);
- 				}
- 				free_irq(port->irq, port);
-+				if (port->mapbase == AT91RM9200_BASE_US0)
-+					free_irq(AT91_PIN_PA19, port);
-+				if (port->mapbase == AT91RM9200_BASE_US3)
-+					free_irq(AT91_PIN_PA24, port);
- 				return -ENOMEM;
- 			}
- 			pdc->dma_addr = dma_map_single(port->dev,
-@@ -873,7 +962,11 @@ static int atmel_startup(struct uart_por
- 		retval = atmel_open_hook(port);
- 		if (retval) {
- 			free_irq(port->irq, port);
--			return retval;
-+			if (port->mapbase == AT91RM9200_BASE_US0)
-+				free_irq(AT91_PIN_PA19, port);
-+			if (port->mapbase == AT91RM9200_BASE_US3)
-+				free_irq(AT91_PIN_PA24, port);
-+ 			return retval;
- 		}
- 	}
- 
-@@ -947,6 +1040,10 @@ static void atmel_shutdown(struct uart_p
- 	 * Free the interrupt
- 	 */
- 	free_irq(port->irq, port);
-+	if (port->mapbase == AT91RM9200_BASE_US0)
-+		free_irq(AT91_PIN_PA19, port);
-+	if (port->mapbase == AT91RM9200_BASE_US3)
-+		free_irq(AT91_PIN_PA24, port);
- 
- 	/*
- 	 * If there is a specific "close" function (to unregister
diff --git a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
deleted file mode 100644
index d300231..0000000
--- a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -1001,7 +1001,15 @@ static inline void configure_usart0_pins
- 		 *  We need to drive the pin manually.  Default is off (RTS is active low).
- 		 */
- 		at91_set_gpio_output(AT91_PIN_PA21, 1);
--	}
-+		}
-+	if (pins & ATMEL_UART_DTR)
-+		at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
-+	if (pins & ATMEL_UART_RI)
-+		at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
-+	if (pins & ATMEL_UART_DCD) {
-+		at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
-+		at91_set_deglitch(AT91_PIN_PA19, 1);
-+		}
- }
- 
- static struct resource uart1_resources[] = {
-@@ -1139,6 +1147,14 @@ static inline void configure_usart3_pins
- 		at91_set_B_periph(AT91_PIN_PB1, 0);	/* CTS3 */
- 	if (pins & ATMEL_UART_RTS)
- 		at91_set_B_periph(AT91_PIN_PB0, 0);	/* RTS3 */
-+	if (pins & ATMEL_UART_DTR)
-+		at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
-+	if (pins & ATMEL_UART_RI)
-+		at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
-+	if (pins & ATMEL_UART_DCD) {
-+		at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
-+		at91_set_deglitch(AT91_PIN_PA24, 1);
-+		}
- }
- 
- static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
diff --git a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch b/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
deleted file mode 100644
index 756e014..0000000
--- a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/arm/at91_ether.c
-+++ b/drivers/net/arm/at91_ether.c
-@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
- 	struct at91_private *lp = netdev_priv(dev);
- 	unsigned int bmsr, bmcr, lpa, mac_cfg;
- 	unsigned int speed, duplex;
-+	unsigned long timeout = jiffies + HZ;
- 
- 	if (!mii_link_ok(&lp->mii)) {		/* no link */
- 		netif_carrier_off(dev);
-@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
- 	read_phy(lp->phy_address, MII_BMSR, &bmsr);
- 	read_phy(lp->phy_address, MII_BMCR, &bmcr);
- 	if (bmcr & BMCR_ANENABLE) {				/* AutoNegotiation is enabled */
--		if (!(bmsr & BMSR_ANEGCOMPLETE))
--			return;			/* Do nothing - another interrupt generated when negotiation complete */
-+		while (!(bmsr & BMSR_ANEGCOMPLETE)) {
-+			if (time_after(jiffies, timeout)) {
-+				printk("at91_ether: Auto-negotiate timeout\n");
-+				return;
-+			}
-+			read_phy(lp->phy_address, MII_BMSR, &bmsr);
-+			read_phy(lp->phy_address, MII_BMCR, &bmcr);
-+			cpu_relax();
-+		}
- 
- 		read_phy(lp->phy_address, MII_LPA, &lpa);
- 		if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
diff --git a/target/linux/at91/patches-2.6.25/014-initpartition.patch b/target/linux/at91/patches-2.6.25/014-initpartition.patch
deleted file mode 100644
index 554c149..0000000
--- a/target/linux/at91/patches-2.6.25/014-initpartition.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/drivers/mtd/devices/at91_dataflash.c
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -163,12 +163,12 @@ static struct mtd_partition static_parti
- 		.mask_flags	= MTD_WRITEABLE,	/* read-only */
- 	},
- 	{
--		.name		= "kernel",
-+		.name		= "knlroot",
- 		.offset		= MTDPART_OFS_NXTBLK,
--		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
-+		.size		= 0x320400,
- 	},
- 	{
--		.name		= "filesystem",
-+		.name		= "jffs2",
- 		.offset		= MTDPART_OFS_NXTBLK,
- 		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
- 	}
diff --git a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch b/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
deleted file mode 100644
index 7bd38b4..0000000
--- a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/serial/usb-serial.c
-+++ b/drivers/usb/serial/usb-serial.c
-@@ -904,7 +904,7 @@ int usb_serial_probe(struct usb_interfac
- 			dev_err(&interface->dev, "No free urbs available\n");
- 			goto probe_error;
- 		}
--		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
-+		buffer_size = 2048;
- 		port->bulk_in_size = buffer_size;
- 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- 		port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);