summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorThibaut VARENE <hacks@slashdirt.org>2017-01-18 11:34:56 +0100
committerJo-Philipp Wich <jo@mein.io>2017-04-28 17:07:24 +0200
commit1aee42c6a9d297e5a8bd241318338217b86c3070 (patch)
tree209cf486541bfc4edeaa6fb61daa382a93dcbe1e /target/linux
parent846457fdbffaffdf44d668715e88cb21765ec6c9 (diff)
downloadmtk-20170518-1aee42c6a9d297e5a8bd241318338217b86c3070.zip
mtk-20170518-1aee42c6a9d297e5a8bd241318338217b86c3070.tar.gz
mtk-20170518-1aee42c6a9d297e5a8bd241318338217b86c3070.tar.bz2
ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WN3000RPV3.dts143
-rw-r--r--target/linux/ramips/image/mt7620.mk11
7 files changed, 163 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 3d3aa0a..545d6a4 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -155,7 +155,8 @@ vr500)
dir-860l-b1)
ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
;;
-ex2700)
+ex2700|\
+wn3000rpv3)
ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
set_wifi_led "$board:green:router"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ebca378..8b75fe1 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -58,6 +58,7 @@ ramips_setup_interfaces()
timecloud|\
w150m|\
widora-neo|\
+ wn3000rpv3|\
wnce2001|\
zbt-cpe102|\
zte-q7)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 5367e65..9499833 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -53,7 +53,8 @@ get_status_led() {
jhr-n825r|\
mpr-a1|\
mpr-a2|\
- mzk-ex750np)
+ mzk-ex750np|\
+ wn3000rpv3)
status_led="$board:red:power"
;;
ac1200pro|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 6afe709..8292da1 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -553,6 +553,9 @@ ramips_board_detect() {
*"WMR-300")
name="wmr-300"
;;
+ *"WN3000RPv3")
+ name="wn3000rpv3"
+ ;;
*"WNCE2001")
name="wnce2001"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0f2510c..c6ad8ca 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -157,6 +157,7 @@ platform_check_image() {
wli-tx4-ag300n|\
wlr-6000|\
wmr-300|\
+ wn3000rpv3|\
wnce2001|\
wndr3700v5|\
wr512-3gn|\
diff --git a/target/linux/ramips/dts/WN3000RPV3.dts b/target/linux/ramips/dts/WN3000RPV3.dts
new file mode 100644
index 0000000..933cf1a
--- /dev/null
+++ b/target/linux/ramips/dts/WN3000RPV3.dts
@@ -0,0 +1,143 @@
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Netgear WN3000RPv3";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_g {
+ label = "wn3000rpv3:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_r {
+ label = "wn3000rpv3:red:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ client_g {
+ label = "wn3000rpv3:green:client";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ client_r {
+ label = "wn3000rpv3:red:client";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "wn3000rpv3:green:router";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "wn3000rpv3:red:router";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wn3000rpv3:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ l_arrow {
+ label = "wn3000rpv3:blue:leftarrow";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ r_arrow {
+ label = "wn3000rpv3:blue:rightarrow";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7b0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ mtd-mac-address = <&art 0x6>;
+ ralink,mtd-eeprom = <&art 0x1000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 1889bcf..42e0ab6 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -75,6 +75,17 @@ define Device/ex2700
endef
TARGET_DEVICES += ex2700
+define Device/wn3000rpv3
+ DTS := WN3000RPV3
+ BLOCKSIZE := 4k
+ IMAGES += factory.bin
+ KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ netgear-header -B WN3000RPv3 -H 29764836+8+0+32+2x2+0
+ DEVICE_TITLE := Netgear WN3000RPv3
+endef
+TARGET_DEVICES += wn3000rpv3
+
define Device/wt3020-4M
DTS := WT3020-4M
BLOCKSIZE := 4k