ocf: update to version 20120127

SVN-Revision: 32672

37 files changed, 4066 insertions, 275 deletions

diff --git a/target/linux/generic/files/crypto/ocf/Kconfig b/target/linux/generic/files/crypto/ocf/Kconfig
index 0a57288..65a4461 100644
--- a/target/linux/generic/files/crypto/ocf/Kconfig
+++ b/target/linux/generic/files/crypto/ocf/Kconfig
@@ -26,7 +26,6 @@ config OCF_CRYPTODEV
 
 config OCF_CRYPTOSOFT
 	tristate "cryptosoft (software crypto engine)"
-	select CRYPTO_MANAGER
 	depends on OCF_OCF
 	help
 	  A software driver for the OCF framework that uses
diff --git a/target/linux/generic/files/crypto/ocf/Makefile b/target/linux/generic/files/crypto/ocf/Makefile
index e600f9b..110ed83 100644
--- a/target/linux/generic/files/crypto/ocf/Makefile
+++ b/target/linux/generic/files/crypto/ocf/Makefile
@@ -105,6 +105,7 @@ patch:
 		patch=ocf-linux-base.patch; \
 		patch24=ocf-linux-24.patch; \
 		patch26=ocf-linux-26.patch; \
+		patch3=ocf-linux-3.patch; \
 		( \
 			find . -name Makefile; \
 			find . -name Config.in; \
@@ -116,6 +117,8 @@ patch:
 		done > $$patch; \
 		cat $$patchbase/patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \
 		cat $$patchbase/patches/linux-2.6.38-ocf.patch $$patch > $$patch26; \
+		cat $$patchbase/patches/linux-3.2.1-ocf.patch $$patch > $$patch3; \
+
 
 #
 # this target probably does nothing for anyone but me - davidm
diff --git a/target/linux/generic/files/crypto/ocf/README b/target/linux/generic/files/crypto/ocf/README
deleted file mode 100644
index 88849dd..0000000
--- a/target/linux/generic/files/crypto/ocf/README
+++ /dev/null
@@ -1,246 +0,0 @@
-###########################
-README - ocf-linux-20100530
-###########################
-
-This README provides instructions for getting ocf-linux compiled and
-operating in a generic linux environment.  Other information on the project
-can be found at the home page:
-
-    http://ocf-linux.sourceforge.net/
-
-Embedded systems and applications requiring userspace acceleration will need
-to patch the kernel source to get full OCF support.  See "Adding OCF to
-linux source" below.  Otherwise the "OCF Quickstart" that follows is the
-easiest way to get started.
-
-If your goal is to accelerate Openswan on Ubuntu or CentOS,  you may find
-that the required binaries are already available on openswan.org:
-
-    ftp://ftp.openswan.org/ocf/
-    ftp://ftp.openswan.org/openswan/binaries/ubuntu/
-
-#####################################################
-OCF Quickstart for Ubuntu/Others (including Openswan)
-#####################################################
-
-This section provides instructions on how to quickly add kernel only support
-for OCF to a GNU/Linux system.  It is only suitable for in-kernel use such as
-Openswan MAST/KLIPS.
-
-If the target is an embedded system, or, userspace acceleration of
-applications such as OpenVPN and OpenSSL, the section below titled
-"Adding OCF to linux source" is more appropriate.
-
-Before building kernel only support for OCF ensure that the appropriate
-linux-headers package is installed:
-
-    cd ocf
-    make ocf_modules
-    sudo make ocf_install
-    OCF_DIR=`pwd`            # remember where OCF sources were built
-
-At this point the ocf, cryptosoft, ocfnull, hifn7751 and ocf-bench modules
-should have been built and installed.  The OCF installation can be tested
-with the following commands:
-
-    modprobe ocf
-    modprobe cryptosoft
-    modprobe ocf-bench
-    dmesg | tail -5
-
-The final modprobe of ocf-bench will fail,  this is intentional as ocf-bench
-is a short lived module that tests in-kernel performance of OCF.  If
-everything worked correctly the "dmesg | tail -5" should include a line
-like:
-
-    [  583.128741] OCF: 45133 requests of 1488 bytes in 251 jiffies (535.122 Mbps)
-
-This shows the in-kernel performance of OCF using the cryptosoft driver.
-For addition driver load options,  see "How to load the OCF modules" below.
-
-If the intention is to run an OCF accelerated Openswan (KLIPS/MAST) then use
-these steps to compile openswan downloaded from openswan.org (2.6.34 or later).
-
-    tar xf openswan-2.6.34.tar.gz
-    cd openswan-2.6.34
-    make programs
-    make KERNELSRC=/lib/modules/`uname -r`/build \
-        KBUILD_EXTRA_SYMBOLS=$OCF_DIR/Module.symvers \
-        MODULE_DEF_INCLUDE=`pwd`/packaging/ocf/config-all.hmodules \
-        MODULE_DEFCONFIG=`pwd`/packaging/ocf/defconfig \
-        module
-    sudo make KERNELSRC=/lib/modules/`uname -r`/build \
-        KBUILD_EXTRA_SYMBOLS=$OCF_DIR/Module.symvers \
-        MODULE_DEF_INCLUDE=`pwd`/packaging/ocf/config-all.hmodules \
-        MODULE_DEFCONFIG=`pwd`/packaging/ocf/defconfig \
-        install minstall
-
-The rest of this document is only required for more complex build
-requirements.
-
-##########################
-Adding OCF to linux source
-##########################
-
-It is recommended that OCF be built as modules as it increases the
-flexibility and ease of debugging the system.
-
-Ensure that the system has /dev/crypto for userspace access to OCF:
-
-    mknod /dev/crypto c 10 70
-
-Generate the kernel patches and apply the appropriate one.
-
-    cd ocf
-    make patch
-
-This will provide three files:
-
-    linux-2.4.*-ocf.patch
-    linux-2.6.*-ocf.patch
-    ocf-linux-base.patch
-
-If either of the first two patches applies to the targets kernel,  then one
-of the following as required:
-
-    cd linux-2.X.Y; patch -p1 < linux-2.4.*-ocf.patch
-    cd linux-2.6.Y; patch -p1 < linux-2.6.*-ocf.patch
-
-Otherwise,  locate the appropriate kernel patch in the patches directory and
-apply that as well as the ocf-linux-base.patch using '-p1'.
-
-When using a linux-2.4 system on a non-x86 platform,  the following may be
-required to build cryptosoft:
-
-    cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY
-
-When using cryptosoft, for simplicity, enable all the crypto support in the
-kernel except for the test driver.  Likewise for the OCF options.  Do not
-enable OCF crypto drivers for HW that is not present (for example the ixp4xx
-driver will not compile on non-Xscale systems).
-
-Make sure that cryptodev.h from the ocf directory is installed as
-crypto/cryptodev.h in an include directory that is used for building
-applications for the target platform.  For example on a host system that
-might be:
-
-    /usr/include/crypto/cryptodev.h
-
-Patch the openssl-0.9.8r code the openssl-0.9.8r.patch from the patches
-directory.  There are many older patch versions in the patches directory
-if required.
-
-The openssl patches provide the following functionality:
-
-    * enables --with-cryptodev for non BSD systems
-    * adds -cpu option to openssl speed for calculating CPU load under linux
-    * fixes null pointer in openssl speed multi thread output.
-    * fixes test keys to work with linux crypto's more stringent key checking.
-    * adds MD5/SHA acceleration (Ronen Shitrit), only enabled with the
-      --with-cryptodev-digests option
-    * fixes bug in engine code caching.
-
-Build the crypto-tools directory for the target to obtain a userspace
-testing tool call cryptotest.
-
-###########################
-How to load the OCF modules
-###########################
-
-First insert the base modules (cryptodev is optional,  it is only used
-for userspace acceleration):
-
-    modprobe ocf
-    modprobe cryptodev
-
-Load the software OCF driver with:
-
-    modprobe cryptosoft
-
-and zero or more of the OCF HW drivers with:
-
-    modprobe safe
-    modprobe hifn7751
-    modprobe ixp4xx
-    ...
-
-All the drivers take a debug option to enable verbose debug so that
-OCF operation may be observed via "dmesg" or the console.  For debug
-load the modules as:
-
-    modprobe ocf crypto_debug=1
-    modprobe cryptodev cryptodev_debug=1
-    modprobe cryptosoft swcr_debug=1
-
-More than one OCF crypto driver may be loaded but then there is no
-guarantee as to which will be used (other than a preference for HW
-drivers over SW drivers by most applications).
-
-It is also possible to enable debug at run time on linux-2.6 systems
-with the following:
-
-    echo 1 > /sys/module/ocf/parameters/crypto_debug
-    echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug
-    echo 1 > /sys/module/cryptosoft/parameters/swcr_debug
-    echo 1 > /sys/module/hifn7751/parameters/hifn_debug
-    echo 1 > /sys/module/safe/parameters/safe_debug
-    echo 1 > /sys/module/ixp4xx/parameters/ixp_debug
-    ...
-
-The ocf-bench driver accepts the following parameters:
-
-    request_q_len - Maximum number of outstanding requests to OCF
-    request_num   - run for at least this many requests
-    request_size  - size of each request (multiple of 16 bytes recommended)
-    request_batch - enable OCF request batching
-    request_cbimm - enable OCF immediate callback on completion
-
-For example:
-
-    modprobe ocf-bench request_size=1024 request_cbimm=0
-
-#######################
-Testing the OCF support
-#######################
-
-run "cryptotest",  it should do a short test for a couple of
-des packets.  If it does everything is working.
-
-If this works,  then ssh will use the driver when invoked as:
-
-    ssh -c 3des username@host
-
-to see for sure that it is operating, enable debug as defined above.
-
-To get a better idea of performance run:
-
-    cryptotest 100 4096
-
-There are more options to cryptotest,  see the help.
-
-It is also possible to use openssl to test the speed of the crypto
-drivers.
-
-    openssl speed -evp des -engine cryptodev -elapsed
-    openssl speed -evp des3 -engine cryptodev -elapsed
-    openssl speed -evp aes128 -engine cryptodev -elapsed
-
-and multiple threads (10) with:
-
-    openssl speed -evp des -engine cryptodev -elapsed -multi 10
-    openssl speed -evp des3 -engine cryptodev -elapsed -multi 10
-    openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10
-
-for public key testing you can try:
-
-    cryptokeytest
-    openssl speed -engine cryptodev rsa -elapsed
-    openssl speed -engine cryptodev dsa -elapsed
-
-
-#############################
-#
-# David McCullough
-# david_mccullough@mcafee.com
-#
-#############################
diff --git a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c
index d03540b..f4841f5 100644
--- a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c
+++ b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c
@@ -592,7 +592,7 @@ c7108_process(void *arg, struct cryptop *crp, int hint)
 			 i < skb_shinfo(skb)->nr_frags &&
 			 sg_num < SCATTERLIST_MAX; i++) {
 		    if (skip < skb_shinfo(skb)->frags[i].size) {
-			//sg[sg_num].page   = skb_frag_page(&kb_shinfo(skb)->frags[i]);
+			//sg[sg_num].page   = skb_frag_page(&skb_shinfo(skb)->frags[i]);
 			//sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip;
 			len = skb_shinfo(skb)->frags[i].size - skip;
 			if (len + sg_len > crd->crd_len)
@@ -636,6 +636,8 @@ c7108_process(void *arg, struct cryptop *crp, int hint)
 		sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip));
 		sg_num = 1;
 	    }
+	    if (sg_num > 0)
+		sg_mark_end(&sg[sg_num-1]);
 	    
 	    
 	    switch (sw->xfm_type) {
diff --git a/target/linux/generic/files/crypto/ocf/criov.c b/target/linux/generic/files/crypto/ocf/criov.c
index cdc731e..a8c1a8c 100644
--- a/target/linux/generic/files/crypto/ocf/criov.c
+++ b/target/linux/generic/files/crypto/ocf/criov.c
@@ -143,7 +143,6 @@ EXPORT_SYMBOL(cuio_copyback);
 EXPORT_SYMBOL(cuio_copydata);
 EXPORT_SYMBOL(cuio_getptr);
 
-
 static void
 skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len)
 {
diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt b/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt
new file mode 100644
index 0000000..807b2e5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt
@@ -0,0 +1,11 @@
+
+You will need the CRYPTO package installed to build this driver,  and
+potentially the ADK.
+
+cavium_crypto sourced from:
+
+	adk/components/source/cavium_ipsec_kame/cavium_ipsec.c
+
+and significantly modified to suit use with OCF.  All original
+copyright/ownership headers retained.
+
diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c
index b0c10a2..0168ad3 100644
--- a/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c
+++ b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c
@@ -497,7 +497,8 @@ octo_process(device_t dev, struct cryptop *crp, int hint)
 				offset_in_page(crp->crp_buf));
 		sg_num = 1;
 	}
-
+	if (sg_num > 0)
+		sg_mark_end(&sg[sg_num-1]);
 
 	/*
 	 * setup a new explicit key
diff --git a/target/linux/generic/files/crypto/ocf/cryptosoft.c b/target/linux/generic/files/crypto/ocf/cryptosoft.c
index f9ecdf9..aa2383d 100644
--- a/target/linux/generic/files/crypto/ocf/cryptosoft.c
+++ b/target/linux/generic/files/crypto/ocf/cryptosoft.c
@@ -814,6 +814,8 @@ static void swcr_process_req(struct swcr_req *req)
 			sg_len, offset_in_page(crp->crp_buf + skip));
 		sg_num = 1;
 	}
+	if (sg_num > 0)
+		sg_mark_end(&req->sg[sg_num-1]);
 
 	switch (sw->sw_type & SW_TYPE_ALG_AMASK) {
 
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/environment.mk b/target/linux/generic/files/crypto/ocf/ep80579/environment.mk
new file mode 100644
index 0000000..1a663e5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/environment.mk
@@ -0,0 +1,78 @@
+ ###########################################################################
+ #
+# This file is provided under a dual BSD/GPLv2 license.  When using or 
+#   redistributing this file, you may do so under either license.
+# 
+#   GPL LICENSE SUMMARY
+# 
+#   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+# 
+#   This program is free software; you can redistribute it and/or modify 
+#   it under the terms of version 2 of the GNU General Public License as
+#   published by the Free Software Foundation.
+# 
+#   This program is distributed in the hope that it will be useful, but 
+#   WITHOUT ANY WARRANTY; without even the implied warranty of 
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+#   General Public License for more details.
+# 
+#   You should have received a copy of the GNU General Public License 
+#   along with this program; if not, write to the Free Software 
+#   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#   The full GNU General Public License is included in this distribution 
+#   in the file called LICENSE.GPL.
+# 
+#   Contact Information:
+#   Intel Corporation
+# 
+#   BSD LICENSE 
+# 
+#   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+#   All rights reserved.
+# 
+#   Redistribution and use in source and binary forms, with or without 
+#   modification, are permitted provided that the following conditions 
+#   are met:
+# 
+#     * Redistributions of source code must retain the above copyright 
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright 
+#       notice, this list of conditions and the following disclaimer in 
+#       the documentation and/or other materials provided with the 
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its 
+#       contributors may be used to endorse or promote products derived 
+#       from this software without specific prior written permission.
+# 
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# 
+# 
+#  version: Security.L.1.0.130
+ #
+ ###########################################################################
+
+
+ICP_LAC_API=$(ICP_ROOT)/Acceleration/include/lac
+ICP_BTR_API=$(ICP_ROOT)/Acceleration/include/btr
+ICP_API_DIR=$(ICP_ROOT)/Acceleration/include
+ICP_OCF_SHIM_DIR?=$(KERNEL_SOURCE_ROOT)/crypto/ocf/
+ifeq ($(wildcard $(ICP_OCF_SHIM_DIR)),)
+ICP_OCF_SHIM_DIR?=$(ROOTDIR)/modules/ocf/
+endif
+
+ICP_OS_LEVEL?=kernel_space
+
+ICP_OS?=linux_2.6
+
+ICP_CORE?=ia
+
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk b/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk
new file mode 100644
index 0000000..96afa9a
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk
@@ -0,0 +1,69 @@
+###################
+# @par
+# This file is provided under a dual BSD/GPLv2 license.  When using or 
+#   redistributing this file, you may do so under either license.
+# 
+#   GPL LICENSE SUMMARY
+# 
+#   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+# 
+#   This program is free software; you can redistribute it and/or modify 
+#   it under the terms of version 2 of the GNU General Public License as
+#   published by the Free Software Foundation.
+# 
+#   This program is distributed in the hope that it will be useful, but 
+#   WITHOUT ANY WARRANTY; without even the implied warranty of 
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+#   General Public License for more details.
+# 
+#   You should have received a copy of the GNU General Public License 
+#   along with this program; if not, write to the Free Software 
+#   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#   The full GNU General Public License is included in this distribution 
+#   in the file called LICENSE.GPL.
+# 
+#   Contact Information:
+#   Intel Corporation
+# 
+#   BSD LICENSE 
+# 
+#   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+#   All rights reserved.
+# 
+#   Redistribution and use in source and binary forms, with or without 
+#   modification, are permitted provided that the following conditions 
+#   are met:
+# 
+#     * Redistributions of source code must retain the above copyright 
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright 
+#       notice, this list of conditions and the following disclaimer in 
+#       the documentation and/or other materials provided with the 
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its 
+#       contributors may be used to endorse or promote products derived 
+#       from this software without specific prior written permission.
+# 
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# 
+# 
+#  version: Security.L.1.0.130
+###################
+
+#specific include directories in kernel space
+INCLUDES+=#e.g. -I$(OSAL_DIR)/include \
+
+#Extra Flags Specific in kernel space e.g. include path or debug flags etc. e.g to add an include path EXTRA_CFLAGS += -I$(src)/../include
+EXTRA_CFLAGS += $(INCLUDES) -O2 -Wall
+EXTRA_LDFLAGS +=-whole-archive
+
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c
index b7df819..d554f16 100644
--- a/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c
@@ -434,10 +434,8 @@ hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	if (pci_enable_device(dev) < 0)
 		return(-ENODEV);
 
-#ifdef HAVE_PCI_SET_MWI
 	if (pci_set_mwi(dev))
 		return(-ENODEV);
-#endif
 
 	if (!dev->irq) {
 		printk("hifn: found device with no IRQ assigned. check BIOS settings!");
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c
index 5bb5602..4d6950a 100644
--- a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c
@@ -208,10 +208,8 @@ hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	if (pci_enable_device(dev) < 0)
 		return(-ENODEV);
 
-#ifdef HAVE_PCI_SET_MWI
 	if (pci_set_mwi(dev))
 		return(-ENODEV);
-#endif
 
 	if (!dev->irq) {
 		printk("hifn: found device with no IRQ assigned. check BIOS settings!");
@@ -385,7 +383,6 @@ static struct pci_device_id hipp_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
 	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
-	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, hipp_pci_tbl);
 
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c
index 1d889ff..e689f24 100644
--- a/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c
@@ -92,6 +92,11 @@ extern int cesaReqResources;
 #define CESA_OCF_MAX_SES 128
 #define CESA_Q_SIZE	 64
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)
+#define FRAG_PAGE(f)    (f).p
+#else
+#define FRAG_PAGE(f)    (f)
+#endif
 
 /* data structures */
 struct cesa_ocf_data {
@@ -415,7 +420,7 @@ cesa_ocf_process(device_t dev, struct cryptop *crp, int hint)
         	for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) {
             		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
             		p_buf_info->bufSize = frag->size;
-            		p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset;
+            		p_buf_info->bufVirtPtr = page_address(FRAG_PAGE(frag->page)) + frag->page_offset;
             		p_buf_info++;
         	}
         	p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1;
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S
new file mode 100644
index 0000000..b7efda0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S
@@ -0,0 +1,163 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#define MV_ASMLANGUAGE
+#include "mvOsAsm.h"
+#include "mvDeviceId.h"
+#include "mvCtrlEnvRegs.h"
+#include "mvCpuIfRegs.h"
+#include "mvCtrlEnvAsm.h"
+
+
+/*******************************************************************************
+* mvCpuIfPreInit - Make early initialization of CPU interface.
+*
+* DESCRIPTION:
+*       The function will initialize the CPU interface parameters that must
+*       be initialize before any BUS activity towards the DDR interface,
+*       which means it must be executed from ROM. Because of that, the function
+*       is implemented in assembly code.
+*       The function configure the following CPU config register parameters:
+*       1) CPU2MbusLTickDrv
+*       2) CPU2MbusLTickSample.
+*       NOTE: This function must be called AFTER the internal register
+*       base is modified to INTER_REGS_BASE.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*       r11 holds return function address.
+*******************************************************************************/
+#define MV88F6281_PCKG_OPT	2
+#define MV88F6192_PCKG_OPT	1
+#define MV88F6180_PCKG_OPT	0
+
+	.globl _mvCpuIfPreInit
+_mvCpuIfPreInit:
+
+        mov     r11, LR     		/* Save link register */
+
+	/* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r4, r5);
+
+        /* goto calcConfigReg if device is 6281 */
+        ldr     r5, =MV88F6281_PCKG_OPT
+        cmp     r4, r5
+        beq     calcConfigReg
+
+        /* goto calcConfigReg if device is 6192/6190 */
+        ldr     r5, =MV88F6192_PCKG_OPT
+        cmp     r4, r5
+        beq     calcConfigReg
+
+        /* Else 6180 */
+        /* Get the "sample on reset" register */
+	MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET)
+        ldr    r5, =MSAR_CPUCLCK_MASK_6180
+        and    r5, r4, r5
+	    mov    r5, r5, lsr #MSAR_CPUCLCK_OFFS_6180
+
+        ldr    r4, =CPU_2_MBUSL_DDR_CLK_1x3
+        cmp    r5, #CPU_2_DDR_CLK_1x3_1
+        beq    setConfigReg
+
+        ldr    r4, =CPU_2_MBUSL_DDR_CLK_1x4
+        cmp    r5, #CPU_2_DDR_CLK_1x4_1
+        beq    setConfigReg
+        b    setConfigReg
+
+calcConfigReg:
+        /* Get the "sample on reset" register */
+	    MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET)
+        ldr    r5, =MSAR_DDRCLCK_RTIO_MASK
+        and    r5, r4, r5
+	    mov    r5, r5, lsr #MSAR_DDRCLCK_RTIO_OFFS
+
+        ldr    r4, =CPU_2_MBUSL_DDR_CLK_1x3
+        cmp    r5, #CPU_2_DDR_CLK_1x3
+        beq    setConfigReg
+
+        ldr    r4, =CPU_2_MBUSL_DDR_CLK_1x4
+        cmp    r5, #CPU_2_DDR_CLK_1x4
+        beq    setConfigReg
+
+        /* Else */
+        ldr    r4, =0
+
+setConfigReg:
+        /* Read CPU Config register */
+        MV_REG_READ_ASM (r7, r5, CPU_CONFIG_REG)
+        ldr    r5, =~(CCR_CPU_2_MBUSL_TICK_DRV_MASK | CCR_CPU_2_MBUSL_TICK_SMPL_MASK)
+        and    r7, r7, r5       /* Clear register fields */
+        orr    r7, r7, r4       /* Set the values according to the findings */
+        MV_REG_WRITE_ASM (r7, r5, CPU_CONFIG_REG)
+
+done:
+        mov     PC, r11         /* r11 is saved link register */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c
index 27b961a..6ac7f12 100644
--- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c
@@ -85,7 +85,7 @@ static MV_TARGET tdmAddrDecPrioTap[] =
         DEV_BOOCS,
         PEX0_IO,
         TBL_TERM
-};
+};

 
 static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
 
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt
new file mode 100644
index 0000000..40fea93
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.5
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt
new file mode 100644
index 0000000..3afa556
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.3
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt
new file mode 100644
index 0000000..3afa556
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.3
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S
new file mode 100644
index 0000000..f2a9365
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S
@@ -0,0 +1,988 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#define MV_ASMLANGUAGE
+#include "mvSysHwConfig.h"
+#include "mvOsAsm.h"
+#include "mvBoardEnvSpec.h"
+#include "mvCpuIfRegs.h"
+#include "mvDramIfConfig.h"
+#include "mvDramIfRegs.h"
+#include "pex/mvPexRegs.h"
+#include "pci/mvPciRegs.h"
+#include "mvCtrlEnvSpec.h"
+#include "mvCtrlEnvAsm.h"
+#include "cpu/mvCpuArm.h"
+#include "mvCommon.h"
+
+/* defines */
+
+#if !defined(MV_INC_BOARD_DDIM)
+.globl dramBoot1
+dramBoot1:
+        .word   0
+
+/******************************************************************************
+*
+*
+*
+*
+*******************************************************************************/
+#if defined(DB_PRPMC) || defined(DB_PEX_PCI) || defined(DB_MNG)
+
+/* PEX_PCI and PRPMC boards 256 MB*/
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x0fff0001
+#define STATIC_SDRAM_CONFIG	     		0x03248400
+#define STATIC_SDRAM_MODE	     		0x62
+#define STATIC_DUNIT_CTRL_LOW	     		0x4041000
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000020
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11602220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x0000030F
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x0
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x0
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0
+#define STATIC_SDRAM_EXT_MODE          		0x0
+
+#elif defined(DB_FPGA)
+
+/* FPGA DC boards 256 MB*/
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x0fff0001
+#define STATIC_SDRAM_CONFIG	     		0x03208400	/* 32bit */
+#define STATIC_SDRAM_MODE	     		0x22
+#define STATIC_DUNIT_CTRL_LOW	     		0x03041000
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000020
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11112220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x0000000D
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x0
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x0
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0
+#define STATIC_SDRAM_EXT_MODE          		0x1
+
+#elif  defined(RD_88F6183GP) || defined(DB_CUSTOMER)
+
+/* Customer 1 DDR2 2 devices 512Mbit by 16 bit */
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x07ff0001
+#define STATIC_SDRAM_CONFIG	     		0x03158400
+#define STATIC_SDRAM_MODE	     		0x452
+#define STATIC_DUNIT_CTRL_LOW	     		0x06041000
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000020
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11912220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x00000502
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x00010000
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000002
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x00000601
+#define STATIC_SDRAM_EXT_MODE          		0x00000440
+
+
+#elif  defined(RD_88F6183AP)
+
+/* DDR2 1 devices 512Mbit by 16 bit */
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x03ff0001
+#define STATIC_SDRAM_CONFIG	     		0x1f154400
+#define STATIC_SDRAM_MODE	     		0x432
+#define STATIC_DUNIT_CTRL_LOW	     		0x04041000
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000020
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11912220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x00000502
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x00010000
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000002
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x00000601
+#define STATIC_SDRAM_EXT_MODE          		0x00000440
+
+/* 6082L MARVELL DIMM */
+#elif  defined(DB_88F6082LBP)
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x07ff0001
+#define STATIC_SDRAM_CONFIG	     		0x7f158400
+#define STATIC_SDRAM_MODE	     		0x432
+#define STATIC_DUNIT_CTRL_LOW	     		0x04041040
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000020
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11612220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x00000501
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x00010000
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000002
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x00000a01
+#define STATIC_SDRAM_EXT_MODE          		0x00000440
+
+#elif  defined(RD_88W8660_AP82S)
+
+/* Shark RD */
+
+#if defined(MV_DRAM_32M)
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x01ff0001
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000010
+#elif defined(MV_DRAM_16M)
+
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x00ff0001
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000000
+
+#else
+#error "NO DDR size selected"
+#endif
+
+#define STATIC_SDRAM_CONFIG	     		0x03144400
+#define STATIC_SDRAM_MODE	     		0x62
+#define STATIC_DUNIT_CTRL_LOW	     		0x4041000
+
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11602220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x0000040b
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x0
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x0
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0
+#define STATIC_SDRAM_EXT_MODE          		0x0
+
+#elif defined(RD_88W8660)
+
+/* Shark RD */
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x03ff0001
+#define STATIC_SDRAM_CONFIG	     		0x03144400
+#define STATIC_SDRAM_MODE	     		0x62
+#define STATIC_DUNIT_CTRL_LOW	     		0x4041000
+#define STATIC_SDRAM_ADDR_CTRL	     		0x00000010
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11602220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x0000040b
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x0
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x0
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0
+#define STATIC_SDRAM_EXT_MODE          		0x0
+
+#else /* NAS */
+
+
+#if defined(RD_88F5182)
+
+#if defined(MV_88F5082)
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x3ff0001
+#define STATIC_SDRAM_ADDR_CTRL	    	 	0x20
+#else
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x7ff0001
+#define STATIC_SDRAM_ADDR_CTRL	    	 	0x20
+#endif
+
+#elif defined(RD_88F5182_3)
+
+#if defined(MV_88F5082)
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x3ff0001
+#define STATIC_SDRAM_ADDR_CTRL	    	 	0x20
+#else
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x7ff0001
+#define STATIC_SDRAM_ADDR_CTRL	    	 	0x20
+#endif
+
+#else
+
+#define STATIC_SDRAM0_BANK0_SIZE	     	0x1ff0001
+#define STATIC_SDRAM_ADDR_CTRL	    	 	0x0
+
+#endif
+
+#if defined(MV_88F5082)
+#define STATIC_SDRAM_CONFIG	     		0x3144400
+#else
+#define STATIC_SDRAM_CONFIG	     		0x3148400
+#endif
+#define STATIC_SDRAM_MODE	     		0x62
+#define STATIC_DUNIT_CTRL_LOW	     		0x4041000
+#define STATIC_SDRAM_TIME_CTRL_LOW     		0x11602220
+#define STATIC_SDRAM_TIME_CTRL_HI	     	0x40c
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x0
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x0
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0
+#define STATIC_SDRAM_EXT_MODE          		0x0
+
+#endif
+
+	.globl _mvDramIfStaticInit
+_mvDramIfStaticInit:
+
+	mov     r11, LR     		/* Save link register */
+	mov	r10, r2
+
+        /* If we boot from NAND jump to DRAM sddress */
+
+        mov     r5, #1
+        ldr     r6, =dramBoot1
+        str     r5, [r6]                /* We started executing from DRAM */
+
+        ldr     r6, dramBoot1
+        cmp     r6, #0
+        bne     1f
+
+
+	/* set all dram windows to 0 */
+	mov	r6, #0
+	MV_REG_WRITE_ASM(r6, r5, 0x1504)
+	MV_REG_WRITE_ASM(r6, r5, 0x150c)
+	MV_REG_WRITE_ASM(r6, r5, 0x1514)
+	MV_REG_WRITE_ASM(r6, r5, 0x151c)
+
+	/* set all dram configuration in temp registers */
+	ldr	r6, = STATIC_SDRAM0_BANK0_SIZE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG0)
+	ldr	r6, = STATIC_SDRAM_CONFIG
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG1)
+	ldr	r6, = STATIC_SDRAM_MODE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG2)
+	ldr	r6, = STATIC_DUNIT_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG3)
+	ldr	r6, = STATIC_SDRAM_ADDR_CTRL
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG4)
+	ldr	r6, = STATIC_SDRAM_TIME_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG5)
+	ldr	r6, = STATIC_SDRAM_TIME_CTRL_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6)
+	ldr	r6, = STATIC_SDRAM_ODT_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG7)
+	ldr	r6, = STATIC_SDRAM_ODT_CTRL_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG8)
+	ldr	r6, = STATIC_SDRAM_DUNIT_ODT_CTRL
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG9)
+	ldr	r6, = STATIC_SDRAM_EXT_MODE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG10)
+
+	mov 	sp, #0
+	bl	_mvDramIfConfig
+1:
+	mov 	r2, r10
+	mov     PC, r11         	/* r11 is saved link register */
+
+#else  /* #if !defined(MV_INC_BOARD_DDIM) */
+
+.globl dramBoot1
+dramBoot1:
+        .word   0
+
+/*******************************************************************************
+* mvDramIfBasicInit - Basic initialization of DRAM interface
+*
+* DESCRIPTION:
+*       The function will initialize the DRAM for basic usage. The function
+*       will use the TWSI assembly API to extract DIMM parameters according
+*       to which DRAM interface will be initialized.
+*       The function referes to the following DRAM parameters:
+*       1) DIMM is registered or not.
+*       2) DIMM width detection.
+*       3) DIMM density.
+*
+* INPUT:
+*       r3 - required size for initial DRAM.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*       Note:
+*       r4 holds I2C EEPROM address
+*       r5 holds SDRAM register base address
+*	r7 holds returned values
+*       r8 holds SDRAM various configuration registers value.
+*       r11 holds return function address.
+*******************************************************************************/
+/* Setting the offsets of the I2C registers */
+#define NUM_OF_ROWS_OFFSET            3
+#define NUM_OF_COLS_OFFSET            4
+#define NUM_OF_RANKS		      5
+#define SDRAM_WIDTH_OFFSET           13
+#define NUM_OF_BANKS_OFFSET          17
+#define SUPPORTED_CL_OFFSET          18
+#define DIMM_TYPE_INFO_OFFSET        20         /* DDR2 only    */
+#define SDRAM_MODULES_ATTR_OFFSET    21
+
+#define DRAM_DEV_DENSITY_128M        0x080
+#define DRAM_DEV_DENSITY_256M        0x100
+#define DRAM_DEV_DENSITY_512M        0x200
+       .globl _mvDramIfBasicInit
+       .extern _i2cInit
+
+_mvDramIfBasicInit:
+
+        mov     r11, LR     		/* Save link register */
+
+        mov     r5, #1
+        ldr     r8, =dramBoot1
+        str     r5, [r8]                /* We started executing from DRAM */
+
+        /* If we boot from NAND jump to DRAM sddress */
+        ldr     r8, dramBoot1
+        cmp     r8, #0
+        movne   pc, r11
+
+
+
+        bl      _i2cInit                /* Initialize TWSI master             */
+
+        /* Get default SDRAM Config values */
+        MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG)
+        bic     r8, r8, #SDRAM_DCFG_MASK
+
+
+        /* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r4, r5);
+
+        /* Return if OrionN */
+        ldr     r5, =MV_5180_DEV_ID
+        cmp     r4, r5
+        beq     cat_through_end
+
+        /* Return if Orion1 */
+        ldr     r5, =MV_5181_DEV_ID
+        cmp     r4, r5
+        beq     cat_through_end
+
+        /* Return if Nas */
+        ldr     r5, =MV_5182_DEV_ID
+        cmp     r4, r5
+        beq     cat_through_end
+
+        /* Return if Shark */
+        ldr     r5, =MV_8660_DEV_ID
+        cmp     r4, r5
+        beq     cat_through_end
+
+        /* goto calcConfigReg if bigger than Orion2*/
+        ldr     r5, =MV_5281_DEV_ID
+        cmp     r4, r5
+        bne     cat_through
+
+cat_through:
+        /* set cat through - for better performance - in orion2 b0 and higher*/
+        orr     r8, r8, #SDRAM_CATTHR_EN
+
+cat_through_end:
+
+
+        /* Get registered/non registered info from DIMM */
+	bl  	_is_Registered
+        beq     nonRegistered
+
+setRegistered:
+        orr     r8, r8, #SDRAM_REGISTERED   /* Set registered bit(17)         */
+
+nonRegistered:
+	/* Get SDRAM width */
+	bl 	_get_width
+
+        orr     r6, r8, #SDRAM_DCFG_X16_DEV /* x16 devices  */
+        cmp     r7, #16
+        beq     setConfigReg
+
+        orr     r6, r8, #SDRAM_DCFG_X8_DEV  /* x8 devices   */
+        cmp     r7, #8
+        beq     setConfigReg
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+setConfigReg:
+        mov     r8, r6
+        ldr     r6, =SDRAM_CONFIG_DV
+        orr     r8, r8, r6              /* Add default settings */
+        mov     r6, r8                  /* Do not swap r8 content */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_CONFIG_REG)
+
+        /* Set maximum CL supported by DIMM */
+	bl	_get_CAL
+
+        /* r7 is DIMM supported CAS (e.g: 3 --> 0x1C)                         */
+        clz     r6, r7
+        rsb     r6, r6, #31     /* r6 = the bit number of MAX CAS supported   */
+
+        /* Check the DDR version */
+        tst     r8, #SDRAM_DTYPE_DDR2
+        bne     casDdr2
+
+casDdr1:
+        ldr	r7, =3		/* stBurstDel field value	*/
+	ldr     r8, =0x52       /* Assuming MAX CL = 1.5        */
+        cmp     r6, #1          /* If CL = 1.5 break            */
+        beq     setModeReg
+
+        ldr	r7, =3		/* stBurstDel field value	*/
+	ldr     r8, =0x22       /* Assuming MAX CL = 2          */
+        cmp     r6, #2          /* If CL = 2 break              */
+        beq     setModeReg
+
+        ldr	r7, =4		/* stBurstDel field value	*/
+	ldr     r8, =0x62       /* Assuming MAX CL = 2.5        */
+        cmp     r6, #3          /* If CL = 2.5 break            */
+        beq     setModeReg
+
+        ldr	r7, =4		/* stBurstDel field value	*/
+	ldr     r8, =0x32       /* Assuming MAX CL = 3          */
+        cmp     r6, #4          /* If CL = 3 break              */
+        beq     setModeReg
+
+        ldr	r7, =5		/* stBurstDel field value	*/
+	ldr     r8, =0x42       /* Assuming MAX CL = 4          */
+        cmp     r6, #6          /* If CL = 4 break              */
+        b       setModeReg
+
+        b       exit_ddrAutoConfig      /* This is an error !!  */
+
+casDdr2:
+        ldr	r7, =4		/* stBurstDel field value	*/
+	ldr     r8, =0x32      /* Assuming MAX CL = 3           */
+        cmp     r6, #3          /* If CL = 3 break              */
+        beq     casDdr2Cont
+
+        ldr	r7, =5		/* stBurstDel field value	*/
+	ldr     r8, =0x42      /* Assuming MAX CL = 4           */
+        cmp     r6, #4          /* If CL = 4 break              */
+        beq     casDdr2Cont
+
+        /* CL 5 currently unsupported. We use CL 4 instead      */
+        ldr	r7, =5		/* stBurstDel field value	*/
+	ldr     r8, =0x42      /* Assuming MAX CL = 5           */
+        cmp     r6, #5          /* If CL = 5 break              */
+        beq     casDdr2Cont
+
+        b       exit_ddrAutoConfig      /* This is an error !!  */
+casDdr2Cont:
+        /* Write recovery for auto-precharge relevant only in DDR2 */
+        orr     r8, r8, #0x400   /* Default value */
+
+setModeReg:
+        /* The CPU must not attempt to change the SDRAM Mode register setting */
+        /* prior to DRAM controller completion of the DRAM initialization     */
+        /* sequence. To guarantee this restriction, it is recommended that    */
+        /* the CPU sets the SDRAM Operation register to NOP command, performs */
+        /* read polling until the register is back in Normal operation value, */
+        /* and then sets SDRAM Mode register to it's new value.               */
+
+	/* write 'nop' to SDRAM operation */
+        mov     r6, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation       */
+_sdramOpPoll1:
+        ldr     r6, [r5]
+        cmp     r6, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll1
+
+        /* Now its safe to write new value to SDRAM Mode register             */
+        MV_REG_WRITE_ASM (r8, r5, SDRAM_MODE_REG)
+
+        /* Make the Dunit write the DRAM its new mode                         */
+        mov     r6, #0x3                 /* Mode Register Set command  */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation       */
+_sdramOpPoll2:
+        ldr     r6, [r5]
+        cmp     r6, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll2
+
+	/* Set Dunit control register according to max CL detected	      */
+	/* If we use registered DIMM, add 1 to stBurstDel		      */
+        MV_REG_READ_ASM (r6, r5, SDRAM_CONFIG_REG)
+	tst	r6, #SDRAM_REGISTERED
+	beq	setDunitReg
+	add	r7, r7, #1
+
+setDunitReg:
+        ldr     r6, =SDRAM_DUNIT_CTRL_LOW_DV
+        orr	r6, r6, r7, LSL #SDRAM_ST_BURST_DEL_OFFS
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+
+
+        /* DIMM density configuration*/
+        /* Density = (1 << (rowNum + colNum)) * dramWidth * dramBankNum       */
+Density:
+	bl 	_getDensity
+	mov 	r8, r7
+        mov     r8, r8, LSR #20 /* Move density 20 bits to the right  */
+                                /* For example 0x10000000 --> 0x1000 */
+
+        mov     r6, #0x00
+        cmp     r8, #DRAM_DEV_DENSITY_128M
+        beq     densCont
+
+        mov     r6, #0x10
+        cmp     r8, #DRAM_DEV_DENSITY_256M
+        beq     densCont
+
+        mov     r6, #0x20
+        cmp     r8, #DRAM_DEV_DENSITY_512M
+        beq     densCont
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+densCont:
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_REG)
+
+        /* Config DDR2 registers (Extended mode, ODTs and pad calibration)    */
+        MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG)
+        tst     r8, #SDRAM_DTYPE_DDR2
+        beq     _extModeODTEnd
+
+
+	/* Set DDR Extended Mode register for working with CS[0]	      */
+        /* write 'nop' to SDRAM operation */
+        mov     r6, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation       */
+_sdramOpPoll3:
+        ldr     r6, [r5]
+        cmp     r6, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll3
+
+        /* Now its safe to write new value to SDRAM Extended Mode register    */
+        ldr	r6, =DDR_SDRAM_EXT_MODE_CS0_DV
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_EXTENDED_MODE_REG)
+
+        /* Make the Dunit write the DRAM its new extended mode                */
+        mov     r6, #0x4                /* Extended Mode Register Set command */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation       */
+_sdramOpPoll4:
+        ldr     r6, [r5]
+        cmp     r6, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll4
+
+	/* ODT configuration is done for single bank CS[0] only		      */
+        /* Config DDR2 On Die Termination (ODT) registers */
+        ldr     r6, =DDR2_ODT_CTRL_LOW_CS0_DV
+        MV_REG_WRITE_ASM (r6, r5, DDR2_SDRAM_ODT_CTRL_LOW_REG)
+
+        ldr     r6, =DDR2_ODT_CTRL_HIGH_CS0_DV
+        MV_REG_WRITE_ASM (r6, r5, DDR2_SDRAM_ODT_CTRL_HIGH_REG)
+
+        ldr     r6, =DDR2_DUNIT_ODT_CTRL_CS0_DV
+        MV_REG_WRITE_ASM (r6, r5, DDR2_DUNIT_ODT_CONTROL_REG)
+
+
+        /* we will check what device we are running and perform
+        Initialization according to device value */
+
+_extModeODTEnd:
+
+        /* Implement Guideline (GL# MEM-2) P_CAL Automatic Calibration  */
+        /* Does Not Work for Address/Control and Data Pads.             */
+        /* Relevant for: 88F5181-A1/B0 and 88F5281-A0                   */
+
+	/* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r6, r5);
+        /* Read device revision */
+	MV_CTRL_REV_GET_ASM(r8, r5);
+
+	/* Continue if OrionN */
+        ldr     r5, =MV_5180_DEV_ID
+        cmp     r6, r5
+        bne     1f
+        b     glMem2End
+1:
+
+	/* Continue if Orion1 and device revision B1 */
+        ldr     r5, =MV_5181_DEV_ID
+        cmp     r6, r5
+        bne     1f
+
+        cmp     r8, #MV_5181_B1_REV
+        bge     glMem2End
+        b       glMem2Start
+1:
+
+        /* Orion NAS */
+        ldr     r5, =MV_5182_DEV_ID
+        cmp     r6, r5
+        beq     glMem2Start
+
+        /* Orion Shark */
+        ldr     r5, =MV_8660_DEV_ID
+        cmp     r6, r5
+        beq     glMem2Start
+
+	b	glMem2End
+
+glMem2Start:
+
+        /* DDR SDRAM Address/Control Pads Calibration                   */
+        MV_REG_READ_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        /* Set Bit [31] to make the register writable                   */
+        orr   r8, r6, #SDRAM_WR_EN
+
+        MV_REG_WRITE_ASM (r8, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        bic   r6, r6, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r6, r6, #SDRAM_TUNE_EN    /* Disable auto calibration     */
+        bic   r6, r6, #SDRAM_DRVN_MASK  /* Clear r5[5:0]<DrvN>          */
+        bic   r6, r6, #SDRAM_DRVP_MASK  /* Clear r5[11:6]<DrvP>         */
+
+        /* Get the final N locked value of driving strength [22:17]     */
+        mov   r5, r6
+        mov   r5, r5, LSL #9
+        mov   r5, r5, LSR #26    /* r5[5:0]<DrvN>  = r6[22:17]<LockN>   */
+        orr   r5, r5, r5, LSL #6 /* r5[11:6]<DrvP> = r5[5:0]<DrvN>      */
+
+        /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]       */
+        orr   r6, r6, r5
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+
+        /* DDR SDRAM Data Pads Calibration                              */
+        MV_REG_READ_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG)
+
+        /* Set Bit [31] to make the register writable                   */
+        orr   r8, r6, #SDRAM_WR_EN
+
+        MV_REG_WRITE_ASM (r8, r5, SDRAM_DATA_PADS_CAL_REG)
+
+        bic   r6, r6, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r6, r6, #SDRAM_TUNE_EN    /* Disable auto calibration     */
+        bic   r6, r6, #SDRAM_DRVN_MASK  /* Clear r5[5:0]<DrvN>          */
+        bic   r6, r6, #SDRAM_DRVP_MASK  /* Clear r5[11:6]<DrvP>         */
+
+        /* Get the final N locked value of driving strength [22:17]     */
+        mov   r5, r6
+        mov   r5, r5, LSL #9
+        mov   r5, r5, LSR #26
+        orr   r5, r5, r5, LSL #6 /* r5[5:0] = r6[22:17]<LockN>  */
+
+        /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]       */
+        orr   r6, r6, r5
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG)
+
+glMem2End:
+        /* Implement Guideline (GL# MEM-3) Drive Strength Value         */
+        /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0             */
+
+        /* Get SDRAM Config value */
+        MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG)
+
+        /* Get DIMM type */
+        tst     r8, #SDRAM_DTYPE_DDR2
+        beq     ddr1StrengthVal
+
+ddr2StrengthVal:
+        ldr     r4, =DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV
+        ldr     r8, =DDR2_DATA_PAD_STRENGTH_TYPICAL_DV
+        b       setDrvStrength
+ddr1StrengthVal:
+        ldr     r4, =DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV
+        ldr     r8, =DDR1_DATA_PAD_STRENGTH_TYPICAL_DV
+
+setDrvStrength:
+        /* DDR SDRAM Address/Control Pads Calibration                   */
+        MV_REG_READ_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        orr   r6, r6, #SDRAM_WR_EN      /* Make register writeable      */
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+        HTOLL(r6,r5)
+
+        bic   r6, r6, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r6, r6, #SDRAM_PRE_DRIVER_STRENGTH_MASK
+        orr   r6, r4, r6                /* Set default value for DDR    */
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+
+        /* DDR SDRAM Data Pads Calibration                              */
+        MV_REG_READ_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG)
+
+        orr   r6, r6, #SDRAM_WR_EN      /* Make register writeable      */
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG)
+        HTOLL(r6,r5)
+
+        bic   r6, r6, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r6, r6, #SDRAM_PRE_DRIVER_STRENGTH_MASK
+        orr   r6, r8, r6                /* Set default value for DDR    */
+
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG)
+
+
+        /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning   */
+        /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0             */
+        /* Get the "sample on reset" register for the DDR frequancy     */
+
+#if defined(MV_RUN_FROM_FLASH)
+	/* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */
+	ldr   r7, = _cpuARMDDRCLK
+	ldr	r4, =_start
+	ldr	r4, [r4]
+	sub   r7, r7, r4
+         ldr   r4, = Lrom_start_of_data
+         ldr	r4, [r4]
+         add   r7, r4, r7
+#else
+	/* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */
+	ldr     r7, = _cpuARMDDRCLK
+	ldr	r4, =_start
+	sub     r7, r7, r4
+	add	r7, r7, #CFG_MONITOR_BASE
+#endif
+        /* Get the "sample on reset" register for the DDR frequancy     */
+        MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET)
+        ldr     r5, =MSAR_ARMDDRCLCK_MASK
+        and     r5, r4, r5
+#if 0 /* YOTAM TO BE FIX */
+	mov    r5, r5, LSR #MSAR_ARMDDRCLCK_OFFS
+#endif
+
+	/* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r6, r8);
+
+        /* Continue if TC90 */
+        ldr     r8, =MV_1281_DEV_ID
+        cmp     r6, r6
+        beq     armClkMsb
+
+        /* Continue if Orion2 */
+        ldr     r8, =MV_5281_DEV_ID
+        cmp     r6, r8
+#if 0 /* YOTAM TO BE FIX */
+        bne     1f
+#endif
+
+armClkMsb:
+#if 0 /* YOTAM TO BE FIX */
+        tst    r4, #MSAR_ARMDDRCLCK_H_MASK
+        beq    1f
+        orr    r5, r5, #BIT4
+1:
+	ldr    r4, =MV_CPU_ARM_CLK_ELM_SIZE
+	mul    r5, r4, r5
+	add    r7, r7, r5
+	add    r7, r7, #MV_CPU_ARM_CLK_DDR_OFF
+	ldr    r5, [r7]
+#endif
+
+        /* Get SDRAM Config value */
+        MV_REG_READ_ASM (r8, r4, SDRAM_CONFIG_REG)
+
+        /* Get DIMM type */
+        tst     r8, #SDRAM_DTYPE_DDR2
+        beq     ddr1FtdllVal
+
+ddr2FtdllVal:
+        ldr    r4, =FTDLL_DDR2_250MHZ
+	ldr    r7, =_250MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_200MHZ
+	ldr    r7, =_200MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_166MHZ
+	ldr    r7, =_166MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_133MHZ
+        b       setFtdllReg
+
+ddr1FtdllVal:
+        ldr    r4, =FTDLL_DDR1_200MHZ
+	ldr    r7, =_200MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr    r4, =FTDLL_DDR1_166MHZ
+	ldr    r7, =_166MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr    r4, =FTDLL_DDR1_133MHZ
+	ldr    r7, =_133MHz
+        cmp    r5, r7
+        beq    setFtdllReg
+        ldr    r4, =0
+
+setFtdllReg:
+
+#if !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L)
+        MV_REG_READ_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG)
+        orr    r8, r8, r4
+        MV_REG_WRITE_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG)
+        bic   r8, r8, #1
+        MV_REG_WRITE_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG)
+#endif /* !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L)*/
+
+
+setTimingReg:
+        /* Set default Timing parameters */
+        MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG)
+        tst     r8, #SDRAM_DTYPE_DDR2
+        bne     ddr2TimeParam
+
+ddr1TimeParam:
+        ldr     r6, =DDR1_TIMING_LOW_DV
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_LOW_REG)
+        ldr     r6, =DDR1_TIMING_HIGH_DV
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG)
+        b       timeParamDone
+
+ddr2TimeParam:
+        ldr     r6, =DDR2_TIMING_LOW_DV
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_LOW_REG)
+        ldr     r6, =DDR2_TIMING_HIGH_DV
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG)
+
+timeParamDone:
+        /* Open CS[0] window to requested size and enable it. Disable other   */
+	/* windows 							      */
+        ldr	r6, =SCBAR_BASE_MASK
+        sub     r3, r3, #1
+        and	r3, r3, r6
+	orr	r3, r3, #1	/* Enable bank */
+        MV_REG_WRITE_ASM (r3, r5, SDRAM_SIZE_REG(0))
+        ldr	r6, =0
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(1))
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(2))
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(3))
+
+exit_ddrAutoConfig:
+        mov     PC, r11         /* r11 is saved link register */
+
+
+/***************************************************************************************/
+/*       r4 holds I2C EEPROM address
+ *       r7 holds I2C EEPROM offset parameter for i2cRead and its --> returned value
+ *       r8 holds SDRAM various configuration registers value.
+ *	r13 holds Link register
+ */
+/**************************/
+_getDensity:
+	mov     r13, LR                            /* Save link register */
+
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR       /* reading from DIMM0      */
+        mov     r7, #NUM_OF_ROWS_OFFSET            /* offset  3               */
+        bl      _i2cRead
+        mov     r8, r7                             /* r8 save number of rows  */
+
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR       /* reading from DIMM0      */
+        mov     r7, #NUM_OF_COLS_OFFSET            /* offset  4               */
+        bl      _i2cRead
+        add     r8, r8, r7                         /* r8 = number of rows + number of col */
+
+        mov     r7, #0x1
+        mov     r8, r7, LSL r8                     /* r8 = (1 << r8)          */
+
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR       /* reading from DIMM0      */
+        mov     r7, #SDRAM_WIDTH_OFFSET            /* offset 13 */
+        bl      _i2cRead
+        mul     r8, r7, r8
+
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR       /* reading from DIMM0      */
+        mov     r7, #NUM_OF_BANKS_OFFSET           /* offset 17               */
+        bl      _i2cRead
+        mul     r7, r8, r7
+
+	mov     PC, r13
+
+/**************************/
+_get_width:
+	mov     r13, LR                 /* Save link register */
+
+        /* Get SDRAM width (SPD offset 13) */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #SDRAM_WIDTH_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+
+	mov     PC, r13
+
+/**************************/
+_get_CAL:
+	mov     r13, LR                 /* Save link register */
+
+        /* Set maximum CL supported by DIMM */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #SUPPORTED_CL_OFFSET     /* offset  18 */
+        bl      _i2cRead
+
+	mov     PC, r13
+
+/**************************/
+/* R8 - sdram configuration register.
+ * Return value in flag if no-registered then Z-flag is set
+ */
+_is_Registered:
+	mov     r13, LR                 /* Save link register */
+
+        /* Get registered/non registered info from DIMM */
+        tst     r8, #SDRAM_DTYPE_DDR2
+        bne     regDdr2
+
+regDdr1:
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #SDRAM_MODULES_ATTR_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+        tst     r7, #0x2
+	b	exit
+regDdr2:
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #DIMM_TYPE_INFO_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+        tst     r7, #0x11               /* DIMM type = regular RDIMM (0x01)   */
+                                        /* or Mini-RDIMM (0x10)               */
+exit:
+        mov     PC, r13
+
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S
new file mode 100644
index 0000000..e34ebbf
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S
@@ -0,0 +1,668 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvDramIfBasicAsm.s
+*
+* DESCRIPTION:
+*       Memory full detection and best timing configuration is done in
+*       C code. C runtime environment requires a stack. This module API
+*       initialize DRAM interface chip select 0 for basic functionality for
+*       the use of stack.
+*       The module API assumes DRAM information is stored in I2C EEPROM reside
+*       in a given I2C address MV_BOARD_DIMM0_I2C_ADDR. The I2C EEPROM
+*       internal data structure is assumed to be orgenzied in common DRAM
+*       vendor SPD structure.
+*       NOTE: DFCDL values are assumed to be already initialized prior to
+*       this module API activity.
+*
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+/* includes */
+#define MV_ASMLANGUAGE
+#include "mvOsAsm.h"
+#include "mvSysHwConfig.h"
+#include "mvDramIfRegs.h"
+#include "mvDramIfConfig.h"
+#include "mvCpuIfRegs.h"
+#include "pex/mvPexRegs.h"
+#include "pci/mvPciRegs.h"
+#include "mvCtrlEnvSpec.h"
+#include "mvCtrlEnvAsm.h"
+#include "cpu/mvCpuArm.h"
+#include "mvCommon.h"
+
+/* defines  */
+
+/* locals   */
+.data
+.globl _mvDramIfConfig
+
+.text
+
+/*******************************************************************************
+* _mvDramIfConfig - Basic DRAM interface initialization.
+*
+* DESCRIPTION:
+*       The function will initialize the following DRAM parameters using the
+*       values prepared by mvDramIfDetect routine. Values are located
+*       in predefined registers.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+
+_mvDramIfConfig:
+
+        /* Save register on stack */
+	cmp	sp, #0
+	beq	no_stack_s
+save_on_stack:
+        stmdb	sp!, {r1, r2, r3, r4, r7, r11}
+no_stack_s:
+
+	/* 1) Write to SDRAM coniguration register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG1)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_CONFIG_REG)
+        str     r4, [r1]
+
+	/* 2) Write Dunit control low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG3)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_REG)
+        str     r4, [r1]
+
+        /* 3) Write SDRAM address control register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG4)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_ADDR_CTRL_REG)
+        str     r4, [r1]
+
+        /* 4) Write SDRAM bank 0 size register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG0)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_SIZE_REG(0))
+        str     r4, [r1]
+
+        /* 5) Write SDRAM open pages control register */
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_OPEN_PAGE_CTRL_REG)
+        ldr     r4, =SDRAM_OPEN_PAGES_CTRL_REG_DV
+        str     r4, [r1]
+
+        /* 6) Write SDRAM timing Low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG5)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_LOW_REG)
+        str     r4, [r1]
+
+        /* 7) Write SDRAM timing High register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG6)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_HIGH_REG)
+        str     r4, [r1]
+
+        /* 8) Write SDRAM mode register */
+        /* The CPU must not attempt to change the SDRAM Mode register setting */
+        /* prior to DRAM controller completion of the DRAM initialization     */
+        /* sequence. To guarantee this restriction, it is recommended that    */
+        /* the CPU sets the SDRAM Operation register to NOP command, performs */
+        /* read polling until the register is back in Normal operation value, */
+        /* and then sets SDRAM Mode register to it’s new value.               */
+
+	/* 8.1 write 'nop' to SDRAM operation */
+        mov     r4, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM(r4, r1, SDRAM_OPERATION_REG)
+
+        /* 8.2 poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll1:
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll1
+
+        /* 8.3 Now its safe to write new value to SDRAM Mode register         */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG2)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_MODE_REG)
+        str     r4, [r1]
+
+        /* 8.4 Make the Dunit write the DRAM its new mode                     */
+        mov     r4, #0x3                 /* Mode Register Set command  */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+
+        /* 8.5 poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll2:
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll2
+
+#ifndef DB_FPGA
+        /* Config DDR2 registers (Extended mode, ODTs and pad calibration)    */
+        MV_REG_READ_ASM (r4, r1, SDRAM_CONFIG_REG)
+        tst     r4, #SDRAM_DTYPE_DDR2
+        beq     _extModeODTEnd
+#endif /* DB_FPGA */
+
+        /* 9) Write SDRAM Extended mode register This operation should be     */
+        /*    done for each memory bank                                       */
+        /* write 'nop' to SDRAM operation */
+        mov     r4, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll3:
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll3
+
+        /* Now its safe to write new value to SDRAM Extended Mode register    */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG10)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_EXTENDED_MODE_REG)
+        str     r4, [r1]
+
+        /* Go over each of the Banks */
+        ldr     r3, =0          /* r3 = DRAM bank Num */
+
+extModeLoop:
+        /* Set the SDRAM Operation Control to each of the DRAM banks          */
+        mov     r2, r3   /* Do not swap the bank counter value */
+        MV_REG_WRITE_ASM (r2, r1, SDRAM_OPERATION_CTRL_REG)
+
+        /* Make the Dunit write the DRAM its new mode                     */
+        mov     r4, #0x4        /* Extended Mode Register Set command  */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+
+        /* poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll4:
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll4
+#ifndef DB_FPGA
+        add     r3, r3, #1
+        cmp     r3, #4         /* 4 = Number of banks */
+        bne     extModeLoop
+
+extModeEnd:
+        /* Config DDR2 On Die Termination (ODT) registers */
+        /* Write SDRAM DDR2 ODT control low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG7)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_LOW_REG)
+        str     r4, [r1]
+
+        /* Write SDRAM DDR2 ODT control high register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG8)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_HIGH_REG)
+        str     r4, [r1]
+
+        /* Write SDRAM DDR2 Dunit ODT control register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG9)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_DUNIT_ODT_CONTROL_REG)
+        str     r4, [r1]
+
+#endif /* DB_FPGA */
+_extModeODTEnd:
+#ifndef DB_FPGA
+        /* Implement Guideline (GL# MEM-2) P_CAL Automatic Calibration  */
+        /* Does Not Work for Address/Control and Data Pads.             */
+        /* Relevant for: 88F5181-A1/B0 and 88F5281-A0                   */
+
+	/* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r3, r1);
+        /* Read device revision */
+	MV_CTRL_REV_GET_ASM(r2, r1);
+
+	/* Continue if OrionN */
+        ldr     r1, =MV_5180_DEV_ID
+        cmp     r3, r1
+        bne     1f
+        b     glMem2End
+1:
+        /* Continue if Orion1 and device revision B1 */
+        ldr     r1, =MV_5181_DEV_ID
+        cmp     r3, r1
+        bne     1f
+
+        cmp     r2, #MV_5181_B1_REV
+        bge     glMem2End
+        b       glMem2Start
+1:
+
+        /* Orion NAS */
+        ldr     r1, =MV_5182_DEV_ID
+        cmp     r3, r1
+        beq     glMem2Start
+
+        /* Orion NAS */
+        ldr     r1, =MV_5082_DEV_ID
+        cmp     r3, r1
+        beq     glMem2Start
+
+        /* Orion Shark */
+        ldr     r1, =MV_8660_DEV_ID
+        cmp     r3, r1
+        beq     glMem2Start
+
+	b	glMem2End
+
+glMem2Start:
+
+        /* DDR SDRAM Address/Control Pads Calibration                         */
+        MV_REG_READ_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        /* Set Bit [31] to make the register writable                   */
+        orr   r2, r3, #SDRAM_WR_EN
+
+        MV_REG_WRITE_ASM (r2, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        bic   r3, r3, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r3, r3, #SDRAM_TUNE_EN    /* Disable auto calibration     */
+        bic   r3, r3, #SDRAM_DRVN_MASK  /* Clear r1[5:0]<DrvN>          */
+        bic   r3, r3, #SDRAM_DRVP_MASK  /* Clear r1[11:6]<DrvP>         */
+
+        /* Get the final N locked value of driving strength [22:17]     */
+        mov   r1, r3
+        mov   r1, r1, LSL #9
+        mov   r1, r1, LSR #26    /* r1[5:0]<DrvN>  = r3[22:17]<LockN>   */
+        orr   r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN>      */
+
+        /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]       */
+        orr   r3, r3, r1
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+
+        /* DDR SDRAM Data Pads Calibration                         	*/
+        MV_REG_READ_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG)
+
+        /* Set Bit [31] to make the register writable                   */
+        orr   r2, r3, #SDRAM_WR_EN
+
+        MV_REG_WRITE_ASM (r2, r1, SDRAM_DATA_PADS_CAL_REG)
+
+        bic   r3, r3, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r3, r3, #SDRAM_TUNE_EN    /* Disable auto calibration     */
+        bic   r3, r3, #SDRAM_DRVN_MASK  /* Clear r1[5:0]<DrvN>          */
+        bic   r3, r3, #SDRAM_DRVP_MASK  /* Clear r1[11:6]<DrvP>         */
+
+        /* Get the final N locked value of driving strength [22:17]     */
+        mov   r1, r3
+        mov   r1, r1, LSL #9
+        mov   r1, r1, LSR #26
+        orr   r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN>  */
+
+        /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]       */
+        orr   r3, r3, r1
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG)
+
+glMem2End:
+
+
+        /* Implement Guideline (GL# MEM-3) Drive Strength Value         */
+        /* Relevant for: 88F5181-A1/B0/B1, 88F5281-A0/B0/C/D, 88F5182,  */
+	/* 88F5082, 88F5181L, 88F6082/L, 88F6183, 88F6183L */
+
+        /* Get SDRAM Config value */
+        MV_REG_READ_ASM (r2, r1, SDRAM_CONFIG_REG)
+
+        /* Get DIMM type */
+        tst     r2, #SDRAM_DTYPE_DDR2
+        beq     ddr1StrengthVal
+
+ddr2StrengthVal:
+        ldr     r4, =DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV
+        ldr     r2, =DDR2_DATA_PAD_STRENGTH_TYPICAL_DV
+        b       setDrvStrength
+ddr1StrengthVal:
+        ldr     r4, =DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV
+        ldr     r2, =DDR1_DATA_PAD_STRENGTH_TYPICAL_DV
+
+setDrvStrength:
+        /* DDR SDRAM Address/Control Pads Calibration                   */
+        MV_REG_READ_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+        orr   r3, r3, #SDRAM_WR_EN      /* Make register writeable      */
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+        HTOLL(r3,r1)
+
+        bic   r3, r3, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r3, r3, #SDRAM_PRE_DRIVER_STRENGTH_MASK
+        orr   r3, r4, r3                /* Set default value for DDR    */
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG)
+
+
+        /* DDR SDRAM Data Pads Calibration                         	      */
+        MV_REG_READ_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG)
+
+        orr   r3, r3, #SDRAM_WR_EN      /* Make register writeable      */
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG)
+        HTOLL(r3,r1)
+
+        bic   r3, r3, #SDRAM_WR_EN      /* Make register read-only      */
+        bic   r3, r3, #SDRAM_PRE_DRIVER_STRENGTH_MASK
+        orr   r3, r2, r3                /* Set default value for DDR    */
+
+        MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG)
+
+#if !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L)
+        /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning   */
+        /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0/C/D, 88F5182 */
+	/* 88F5082, 88F5181L, 88F6082/L */
+                
+	/* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */
+	ldr     r7, = _cpuARMDDRCLK
+	ldr	r4, =_start
+	sub     r7, r7, r4
+	add	r7, r7, #CFG_MONITOR_BASE
+
+        /* Get the "sample on reset" register for the DDR frequancy     */
+        MV_REG_READ_ASM (r4, r1, MPP_SAMPLE_AT_RESET)
+        ldr     r1, =MSAR_ARMDDRCLCK_MASK
+        and     r1, r4, r1
+#if 0 /* YOTAM TO BE FIX */
+	mov    r1, r1, LSR #MSAR_ARMDDRCLCK_OFFS
+#endif
+
+	/* Read device ID  */
+	MV_CTRL_MODEL_GET_ASM(r3, r2);
+
+        /* Continue if TC90 */
+        ldr     r2, =MV_1281_DEV_ID
+        cmp     r3, r2
+        beq     armClkMsb
+
+        /* Continue if Orion2 */
+        ldr     r2, =MV_5281_DEV_ID
+        cmp     r3, r2
+#if 0 /* YOTAM TO BE FIX */
+        bne     1f
+#endif
+
+armClkMsb:
+#if 0 /* YOTAM TO BE FIX */
+	tst    r4, #MSAR_ARMDDRCLCK_H_MASK
+        beq    1f
+        orr    r1, r1, #BIT4
+1:
+	ldr    r4, =MV_CPU_ARM_CLK_ELM_SIZE
+	mul    r1, r4, r1
+	add    r7, r7, r1
+	add    r7, r7, #MV_CPU_ARM_CLK_DDR_OFF
+	ldr    r1, [r7]
+#endif
+
+        /* Get SDRAM Config value */
+        MV_REG_READ_ASM (r2, r4, SDRAM_CONFIG_REG)
+
+        /* Get DIMM type */
+        tst     r2, #SDRAM_DTYPE_DDR2
+        beq     ddr1FtdllVal
+
+ddr2FtdllVal:
+        ldr     r2, =MV_5281_DEV_ID
+        cmp     r3, r2
+	bne	2f
+    	MV_CTRL_REV_GET_ASM(r3, r2)
+        cmp     r3, #MV_5281_D0_REV
+        beq     orin2_d0_ddr2_ftdll_val
+        cmp     r3, #MV_5281_D1_REV
+        beq     orin2_d1_ddr2_ftdll_val
+        cmp     r3, #MV_5281_D2_REV
+        beq     orin2_d1_ddr2_ftdll_val
+	b	ddr2_default_val
+
+/* Set Orion 2 D1 ftdll values for DDR2 */
+orin2_d1_ddr2_ftdll_val:
+	ldr    r4, =FTDLL_DDR2_250MHZ_5281_D1
+	ldr    r7, =_250MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_200MHZ_5281_D1
+	ldr    r7, =_200MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_166MHZ_5281_D0
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+	b	ddr2_default_val
+
+/* Set Orion 2 D0 ftdll values for DDR2 */
+orin2_d0_ddr2_ftdll_val:
+	ldr    r4, =FTDLL_DDR2_250MHZ_5281_D0
+	ldr    r7, =_250MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_200MHZ_5281_D0
+	ldr    r7, =_200MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_166MHZ_5281_D0
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+	b       ddr2_default_val
+2:
+        ldr     r2, =MV_5182_DEV_ID
+        cmp     r3, r2
+	bne	3f
+
+/* Set Orion nas ftdll values for DDR2 */
+orin_nas_ftdll_val:
+        ldr     r4, =FTDLL_DDR2_166MHZ_5182
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+
+/* default values for all other devices */
+3:
+ddr2_default_val:
+        ldr    r4, =FTDLL_DDR2_250MHZ
+	ldr    r7, =_250MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_200MHZ
+	ldr    r7, =_200MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_166MHZ
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR2_133MHZ
+	ldr    r7, =_133MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr    r4, =0
+        b       setFtdllReg
+
+ddr1FtdllVal:
+        ldr     r2, =MV_5281_DEV_ID
+        cmp     r3, r2
+	bne	2f
+    	MV_CTRL_REV_GET_ASM(r3, r2)
+        cmp     r3, #MV_5281_D0_REV
+        bge     orin2_ddr1_ftdll_val
+	b	ddr1_default_val
+
+/* Set Orion 2 D0 and above ftdll values for DDR1 */
+orin2_ddr1_ftdll_val:
+        ldr     r4, =FTDLL_DDR1_200MHZ_5281_D0
+	ldr    r7, =_200MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+        ldr     r4, =FTDLL_DDR1_166MHZ_5281_D0
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+	b       ddr1_default_val
+2:
+        ldr     r2, =MV_5181_DEV_ID
+        cmp     r3, r2
+	bne	3f
+    	MV_CTRL_REV_GET_ASM(r3, r2)
+        cmp     r3, #MV_5181_B1_REV
+        bge     orin1_ddr1_ftdll_val
+	b	ddr1_default_val
+
+/* Set Orion 1 ftdll values for DDR1 */
+orin1_ddr1_ftdll_val:
+        ldr     r4, =FTDLL_DDR1_166MHZ_5181_B1
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+3:
+ddr1_default_val:
+        ldr    r4, =FTDLL_DDR1_133MHZ
+	ldr    r7, =_133MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+
+        ldr    r4, =FTDLL_DDR1_166MHZ
+	ldr    r7, =_166MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+
+        ldr    r4, =FTDLL_DDR1_200MHZ
+	ldr    r7, =_200MHz
+        cmp    r1, r7
+        beq    setFtdllReg
+
+        ldr    r4, =0
+
+setFtdllReg:
+
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_FTDLL_CONFIG_REG)
+        HTOLL(r4,r1)
+        bic   r4, r4, #1
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_FTDLL_CONFIG_REG)
+
+#endif /* !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L) */
+#endif /* DB_FPGA */
+
+restoreTmpRegs:
+        /* Restore the registers we used to save the DDR detect values */
+
+        ldr     r4, =DRAM_BUF_REG0_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG0)
+
+        ldr     r4, =DRAM_BUF_REG1_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG1)
+
+        ldr     r4, =DRAM_BUF_REG2_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG2)
+
+        ldr     r4, =DRAM_BUF_REG3_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG3)
+
+        ldr     r4, =DRAM_BUF_REG4_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG4)
+
+        ldr     r4, =DRAM_BUF_REG5_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG5)
+
+        ldr     r4, =DRAM_BUF_REG6_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG6)
+
+        ldr     r4, =DRAM_BUF_REG7_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG7)
+
+        ldr     r4, =DRAM_BUF_REG8_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG8)
+
+        ldr     r4, =DRAM_BUF_REG9_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG9)
+
+        ldr     r4, =DRAM_BUF_REG10_DV
+        MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG10)
+
+
+        /* Restore registers */
+        /* Save register on stack */
+	cmp	sp, #0
+	beq	no_stack_l
+load_from_stack:
+        ldmia	sp!, {r1, r2, r3, r4, r7, r11}
+no_stack_l:
+
+        mov     pc, lr
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S
new file mode 100644
index 0000000..7672381
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S
@@ -0,0 +1,986 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#define	_ASMLANGUAGE
+#define MV_ASMLANGUAGE
+#include "mvSysHwConfig.h"
+#include "mvOsAsm.h"
+#include "boardEnv/mvBoardEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+#include "mvDramIfConfig.h"
+#include "mvDramIfRegs.h"
+#include "pex/mvPexRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/mvCtrlEnvAsm.h"
+#include "mvCommon.h"
+
+/* defines */
+
+#if defined(MV_STATIC_DRAM_ON_BOARD) 
+.globl dramBoot1
+dramBoot1:
+        .word   0
+
+/******************************************************************************
+*
+*
+*
+*
+*******************************************************************************/
+#if defined(DB_MV78XX0) || defined(DB_MV88F632X)
+/* DDR2 boards 512MB 333MHz */
+#define STATIC_SDRAM0_BANK0_SIZE		0x1ffffff1 /*	0x1504	*/ 
+#define STATIC_SDRAM_CONFIG	     		0x43048C30 /*	0x1400  */	
+#define STATIC_SDRAM_MODE	     		0x00000652 /*	0x141c  */	
+#define STATIC_DUNIT_CTRL_LOW			0x38543000 /*   0x1404  */  
+#define STATIC_DUNIT_CTRL_HI			0x0000FFFF /*   0x1424  */  
+#define STATIC_SDRAM_ADDR_CTRL			0x00000088 /*   0x1410  */  
+#define STATIC_SDRAM_TIME_CTRL_LOW		0x22125441 /*   0x1408  */  
+#define STATIC_SDRAM_TIME_CTRL_HI		0x00000A29 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000E80F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000040 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00085520 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00008552 /*   0x147C  */  
+
+#elif defined(RD_MV78XX0_AMC)
+/* On board DDR2 512MB 400MHz CL5 */
+#define STATIC_SDRAM0_BANK0_SIZE		0x1ffffff1 /*	0x1504	*/ 
+#define STATIC_SDRAM_CONFIG	     		0x43008C30 /*	0x1400  */	
+#define STATIC_SDRAM_MODE	     		0x00000652 /*	0x141c  */	
+#define STATIC_DUNIT_CTRL_LOW			0x38543000 /*   0x1404  */  
+#define STATIC_DUNIT_CTRL_HI			0x0000F07F /*   0x1424  */  
+#define STATIC_SDRAM_ADDR_CTRL			0x000000DD /*   0x1410  */  
+#define STATIC_SDRAM_TIME_CTRL_LOW		0x23135441 /*   0x1408  */  
+#define STATIC_SDRAM_TIME_CTRL_HI		0x00000A32 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000EB0F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000040 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00085520 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00008552 /*   0x147C  */  
+
+#elif defined(RD_MV78XX0_H3C)
+/* DDR2 boards 512MB 333MHz */
+#define STATIC_SDRAM0_BANK0_SIZE		0x1ffffff1 /*	0x1504	*/ 
+#define STATIC_SDRAM_CONFIG	     		0x43048a25 /*	0x1400  */	
+#define STATIC_SDRAM_MODE	     		0x00000652 /*	0x141c  */	
+#define STATIC_DUNIT_CTRL_LOW			0x38543000 /*   0x1404  */  
+#define STATIC_DUNIT_CTRL_HI			0x0000F07F /*   0x1424  */  
+#define STATIC_SDRAM_ADDR_CTRL			0x00000088 /*   0x1410  */  
+#define STATIC_SDRAM_TIME_CTRL_LOW		0x2202444e /*   0x1408  */  
+#define STATIC_SDRAM_TIME_CTRL_HI		0x00000A22 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000EB0F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000040 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00085520 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00008552 /*   0x147C  */  
+
+#elif defined(RD_MV78XX0_PCAC)
+/* DDR2 boards 256MB 200MHz */
+#define STATIC_SDRAM0_BANK0_SIZE		0x0ffffff1 /*	0x1504	*/ 
+#define STATIC_SDRAM_CONFIG	     		0x43000a25 /*	0x1400  */	
+#define STATIC_SDRAM_MODE	     		0x00000652 /*	0x141c  */	
+#define STATIC_DUNIT_CTRL_LOW			0x38543000 /*   0x1404  */  
+#define STATIC_DUNIT_CTRL_HI			0x0000F07F /*   0x1424  */  
+#define STATIC_SDRAM_ADDR_CTRL			0x000000DD /*   0x1410  */  
+#define STATIC_SDRAM_TIME_CTRL_LOW		0x2202444e /*   0x1408  */  
+#define STATIC_SDRAM_TIME_CTRL_HI		0x00000822 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000EB0F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000040 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00085520 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00008552 /*   0x147C  */  
+
+#else
+/* DDR2 MV88F6281 boards 256MB 400MHz */
+#define STATIC_SDRAM0_BANK0_SIZE		0x0FFFFFF1 /*	0x1504	*/ 
+#define STATIC_SDRAM_CONFIG	     		0x43000c30 /*	0x1400  */	
+#define STATIC_SDRAM_MODE	     		0x00000C52 /*	0x141c  */	
+#define STATIC_DUNIT_CTRL_LOW			0x39543000 /*   0x1404  */  
+#define STATIC_DUNIT_CTRL_HI			0x0000F1FF /*   0x1424  */  
+#define STATIC_SDRAM_ADDR_CTRL			0x000000cc /*   0x1410  */  
+#define STATIC_SDRAM_TIME_CTRL_LOW		0x22125451 /*   0x1408  */  
+#define STATIC_SDRAM_TIME_CTRL_HI		0x00000A33 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x003C0000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000F80F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000042 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00085520 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00008552 /*   0x147C  */  
+#endif /* MV78XX0 */
+
+	.globl _mvDramIfStaticInit
+_mvDramIfStaticInit:
+
+	mov     r11, LR     		/* Save link register */
+	mov	r10, r2
+
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+	orr	r6, r6, #BIT4	/* Enable 2T mode */
+	bic	r6, r6, #BIT6	/* clear ctrlPos */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+#endif
+
+     	/*DDR SDRAM Initialization Control */
+	ldr	r6, =DSICR_INIT_EN
+	MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG)
+2:	MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG)
+         and    r6, r6, #DSICR_INIT_EN
+         cmp    r6, #0
+         bne 2b
+
+        /* If we boot from NAND jump to DRAM address */
+        mov     r5, #1
+        ldr     r6, =dramBoot1
+        str     r5, [r6]                /* We started executing from DRAM */
+
+        ldr     r6, dramBoot1
+        cmp     r6, #0
+        bne     1f
+
+	/* set all dram windows to 0 */
+	mov	r6, #0
+	MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0))
+	MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,1))
+	MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,2))
+	MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,3))
+	ldr	r6, = STATIC_SDRAM0_BANK0_SIZE
+	MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0))
+
+
+	/* set all dram configuration in temp registers */
+	ldr	r6, = STATIC_SDRAM0_BANK0_SIZE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG0)
+	ldr	r6, = STATIC_SDRAM_CONFIG
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG1)
+	ldr	r6, = STATIC_SDRAM_MODE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG2)
+	ldr	r6, = STATIC_DUNIT_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG3)
+	ldr	r6, = STATIC_SDRAM_ADDR_CTRL
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG4)
+	ldr	r6, = STATIC_SDRAM_TIME_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG5)
+	ldr	r6, = STATIC_SDRAM_TIME_CTRL_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6)
+	ldr	r6, = STATIC_SDRAM_ODT_CTRL_LOW
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG7)
+	ldr	r6, = STATIC_SDRAM_ODT_CTRL_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG8)
+	ldr	r6, = STATIC_SDRAM_DUNIT_ODT_CTRL
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG9)
+	ldr	r6, = STATIC_SDRAM_EXT_MODE
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG10)
+	ldr	r6, = STATIC_SDRAM_DDR2_TIMING_LO
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG11)
+	ldr	r6, = STATIC_SDRAM_DDR2_TIMING_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG12)
+#ifndef MV_NAND_BOOT
+	ldr	r6, = STATIC_DUNIT_CTRL_HI
+	MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG13)
+#endif
+
+	ldr	sp,=0
+	bl	_mvDramIfConfig
+	ldr	r0, =0
+#ifdef MV78XX0
+	bl	_mvDramIfEccMemInit 
+#endif
+1:
+	mov 	r2, r10
+	mov     PC, r11         	/* r11 is saved link register */
+
+#else  /* #if defined(MV_STATIC_DRAM_ON_BOARD) */
+
+.globl dramBoot1
+dramBoot1:
+        .word   0
+
+/*******************************************************************************
+* mvDramIfBasicInit - Basic initialization of DRAM interface
+*
+* DESCRIPTION:
+*       The function will initialize the DRAM for basic usage. The function
+*       will use the TWSI assembly API to extract DIMM parameters according
+*       to which DRAM interface will be initialized.
+*       The function referes to the following DRAM parameters:
+*       1) DIMM is registered or not.
+*       2) DIMM width detection.
+*       3) DIMM density.
+*
+* INPUT:
+*       r3 - required size for initial DRAM.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*       Note:
+*       r4 holds I2C EEPROM address
+*       r5 holds SDRAM register base address
+*	r7 holds returned values
+*       r8 holds SDRAM various configuration registers value.
+*       r11 holds return function address.
+*******************************************************************************/
+/* Setting the offsets of the I2C registers */
+#define DIMM_TYPE_OFFSET	      2
+#define NUM_OF_ROWS_OFFSET            3
+#define NUM_OF_COLS_OFFSET            4
+#define NUM_OF_RANKS		      5
+#define DIMM_CONFIG_TYPE             11
+#define SDRAM_WIDTH_OFFSET           13
+#define NUM_OF_BANKS_OFFSET          17
+#define SUPPORTED_CL_OFFSET          18
+#define DIMM_TYPE_INFO_OFFSET        20         /* DDR2 only    */
+#define SDRAM_MODULES_ATTR_OFFSET    21
+#define RANK_SIZE_OFFSET             31
+
+#define DRAM_DEV_DENSITY_128M         128
+#define DRAM_DEV_DENSITY_256M         256
+#define DRAM_DEV_DENSITY_512M         512
+#define DRAM_DEV_DENSITY_1G          1024
+#define DRAM_DEV_DENSITY_2G          2048
+
+#define DRAM_RANK_DENSITY_128M       0x20
+#define DRAM_RANK_DENSITY_256M       0x40
+#define DRAM_RANK_DENSITY_512M       0x80
+#define DRAM_RANK_DENSITY_1G	     0x1
+#define DRAM_RANK_DENSITY_2G	     0x2
+
+       .globl _mvDramIfBasicInit
+       .extern _i2cInit
+_mvDramIfBasicInit:
+
+        mov     r11, LR     		/* Save link register */
+
+	/* Set Dunit high control register	      */
+        MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG)
+	orr	r6, r6, #BIT7 /* SDRAM__D2P_EN */
+	orr	r6, r6, #BIT8 /* SDRAM__P2D_EN */
+#ifdef MV78XX0
+	orr	r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */
+	orr	r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */
+	orr	r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */
+#endif
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG)
+
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+	orr	r6, r6, #BIT4	/* Enable 2T mode */
+	bic	r6, r6, #BIT6	/* clear ctrlPos */
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+#endif
+
+     	/*DDR SDRAM Initialization Control */
+	ldr	r6, =DSICR_INIT_EN
+	MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG)
+2:	MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG)
+         and    r6, r6, #DSICR_INIT_EN
+         cmp    r6, #0
+         bne 2b
+
+        mov     r5, #1
+        ldr     r8, =dramBoot1
+        str     r5, [r8]                /* We started executing from DRAM */
+
+        /* If we boot from NAND jump to DRAM address */
+        ldr     r8, dramBoot1
+        cmp     r8, #0
+        movne   pc, r11
+
+        bl      _i2cInit                /* Initialize TWSI master             */
+
+        /* Check if we have more then 1 dimm */
+	ldr	r6, =0
+	MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14)
+#ifdef MV78XX0
+	bl _is_Second_Dimm_Exist
+	beq single_dimm
+	ldr	r6, =1
+	MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14)
+single_dimm:
+        bl      _i2cInit                /* Initialize TWSI master             */
+#endif
+
+        /* Get default SDRAM Config values */
+        MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG)
+
+        /* Get registered/non registered info from DIMM */
+	bl  	_is_Registered
+        beq     nonRegistered
+
+setRegistered:
+        orr     r8, r8, #SDRAM_REGISTERED   /* Set registered bit(17)         */
+nonRegistered:
+#ifdef MV78XX0
+        /* Get ECC/non ECC info from DIMM */
+	bl  	_is_Ecc
+        beq     setConfigReg
+
+setEcc:        
+        orr     r8, r8, #SDRAM_ECC_EN   /* Set ecc bit(18)         */
+#endif
+setConfigReg:
+        MV_REG_WRITE_ASM (r8, r5, DRAM_BUF_REG1)
+
+        /* Set maximum CL supported by DIMM */
+	bl	_get_CAL
+
+        /* r7 is DIMM supported CAS (e.g: 3 --> 0x1C)                         */
+        clz     r6, r7
+        rsb     r6, r6, #31     /* r6 = the bit number of MAX CAS supported   */
+
+casDdr2:
+	ldr     r7, =0x41        /* stBurstInDel|stBurstOutDel field value     */
+	ldr     r3, =0x53       /* stBurstInDel|stBurstOutDel registered value*/
+	ldr     r8, =0x32      /* Assuming MAX CL = 3           */
+        cmp     r6, #3          /* If CL = 3 break              */
+        beq     casDdr2Cont
+
+	ldr     r7, =0x53        /* stBurstInDel|stBurstOutDel field value     */
+	ldr     r3, =0x65       /* stBurstInDel|stBurstOutDel registered value*/
+	ldr     r8, =0x42      /* Assuming MAX CL = 4           */
+        cmp     r6, #4          /* If CL = 4 break              */
+        beq     casDdr2Cont
+
+	ldr     r7, =0x65        /* stBurstInDel|stBurstOutDel field value     */
+	ldr     r3, =0x77       /* stBurstInDel|stBurstOutDel registered value*/
+	ldr     r8, =0x52      /* Assuming MAX CL = 5           */
+        cmp     r6, #5          /* If CL = 5 break              */
+        beq     casDdr2Cont
+
+	ldr     r7, =0x77        /* stBurstInDel|stBurstOutDel field value     */
+	ldr     r3, =0x89       /* stBurstInDel|stBurstOutDel registered value*/
+	ldr     r8, =0x62      /* Assuming MAX CL = 6           */
+        cmp     r6, #6          /* If CL = 5 break              */
+        beq     casDdr2Cont                
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig      /* This is an error !!  */
+casDdr2Cont:
+
+        /* Get default SDRAM Mode values */
+        MV_REG_READ_ASM (r6, r5, SDRAM_MODE_REG)
+        bic     r6, r6, #(BIT6 | BIT5 | BIT4) /* Clear CL filed */
+	orr	r6, r6, r8
+        MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG2)
+
+	/* Set Dunit control register according to max CL detected	      */
+        MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG1)
+	tst	r6, #SDRAM_REGISTERED
+	beq	setDunitReg
+	mov	r7, r3
+
+setDunitReg:
+#ifdef MV78XX0
+        /* Set SDRAM Extended Mode register for double DIMM */
+	/* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */
+
+        MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG)
+	ldr	r5, =MSAR_SYSCLCK_MASK
+	and	r4, r4, r5	
+	ldr	r5, =MSAR_SYSCLCK_333
+	cmp	r4, r5
+	ble	Clock333
+	add r7, r7, #0x10
+Clock333:
+#endif
+
+        MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG)
+	bic	r6, r6, #(0xff << 20) /* Clear SBout and SBin */
+	orr	r6, r6, #BIT4	/* Enable 2T mode */
+	bic	r6, r6, #BIT6	/* clear ctrlPos */
+	orr	r6, r6, r7, LSL #20
+        MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG3)
+
+	/* Set Dunit high control register	      */
+        MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG)
+	orr	r6, r6, #BIT7 /* SDRAM__D2P_EN */
+	orr	r6, r6, #BIT8 /* SDRAM__P2D_EN */
+#ifdef MV78XX0
+	orr	r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */
+	orr	r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */
+	orr	r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */
+#endif
+        MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG13)
+
+        /* DIMM density configuration*/
+        /* Density = (1 << (rowNum + colNum)) * dramWidth * dramBankNum       */
+Density:
+	/* Get bank 0 and 1 density */
+	ldr	r6, =0
+	bl 	_getDensity
+
+	mov 	r8, r7
+        mov     r8, r8, LSR #20 /* Move density 20 bits to the right  */
+                                /* For example 0x10000000 --> 0x1000 */
+
+        mov     r3, #(SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1))
+        cmp     r8, #DRAM_DEV_DENSITY_256M
+        beq     get_bank_2_density
+
+        mov     r3, #(SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1))
+        cmp     r8, #DRAM_DEV_DENSITY_512M
+        beq     get_bank_2_density
+
+        mov     r3, #(SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1))
+        cmp     r8, #DRAM_DEV_DENSITY_1G
+        beq     get_bank_2_density
+
+        mov     r3, #(SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1))
+        cmp     r8, #DRAM_DEV_DENSITY_2G
+        beq     get_bank_2_density
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+get_bank_2_density:
+	/* Check for second dimm */
+	MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14)
+	cmp	r6, #1
+	bne 	get_width
+
+	/* Get bank 2 and 3 density */
+	ldr	r6, =2
+	bl 	_getDensity
+
+	mov 	r8, r7
+        mov     r8, r8, LSR #20 /* Move density 20 bits to the right  */
+                                /* For example 0x10000000 --> 0x1000 */
+
+        orr     r3, r3, #(SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3))
+        cmp     r8, #DRAM_DEV_DENSITY_256M
+        beq     get_width
+
+        and     r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3))
+        orr     r3, r3, #(SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3))
+        cmp     r8, #DRAM_DEV_DENSITY_512M
+        beq     get_width
+
+        and     r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3))
+        orr     r3, r3, #(SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3))
+        cmp     r8, #DRAM_DEV_DENSITY_1G
+        beq     get_width
+
+        and     r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3))
+        orr     r3, r3, #(SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3))
+        cmp     r8, #DRAM_DEV_DENSITY_2G
+        beq     get_width
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+	/* Get SDRAM width */
+get_width: 
+	/* Get bank 0 and 1 width */
+	ldr	r6, =0
+	bl 	_get_width
+
+        cmp     r7, #8           /* x8 devices   */  
+        beq     get_bank_2_width
+
+        orr     r3, r3, #(SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1)) /* x16 devices  */
+        cmp     r7, #16
+        beq     get_bank_2_width
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+get_bank_2_width:
+	/* Check for second dimm */
+	MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14)
+	cmp	r6, #1
+	bne 	densCont
+
+	/* Get bank 2 and 3 width */
+	ldr	r6, =2
+	bl 	_get_width
+
+        cmp     r7, #8           /* x8 devices   */  
+        beq     densCont
+
+        orr     r3, r3, #(SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3)) /* x16 devices  */
+        cmp     r7, #16
+        beq     densCont
+
+        /* This is an error. return */
+        b       exit_ddrAutoConfig
+
+densCont:
+        MV_REG_WRITE_ASM (r3, r5, DRAM_BUF_REG4)
+
+        /* Set SDRAM timing control low register */
+	ldr	r4, =SDRAM_TIMING_CTRL_LOW_REG_DEFAULT
+        /* MV_REG_READ_ASM (r4, r5, SDRAM_TIMING_CTRL_LOW_REG) */
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG5)
+
+        /* Set SDRAM timing control high register */
+	ldr	r6, =SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT
+
+    MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG)
+	ldr	r5, =MSAR_SYSCLCK_MASK
+	and	r4, r4, r5	
+	ldr	r5, =MSAR_SYSCLCK_333
+	cmp	r4, r5
+	blt	timingHighClock333
+    orr r6, r6, #BIT9
+
+timingHighClock333:
+    /* MV_REG_READ_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG) */
+    MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6)
+
+	/* Check for second dimm */
+	MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14)
+	cmp	r6, #1
+	bne 	single_dimm_odt
+
+        /* Set SDRAM ODT control low register for double DIMM*/        
+        ldr	r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7)
+
+        /* Set DUNIT ODT control register for double DIMM */
+        ldr	r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9)
+
+#ifdef MV78XX0
+        /* Set SDRAM Extended Mode register for double DIMM */
+	/* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */
+
+        MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG)
+	ldr	r5, =MSAR_SYSCLCK_MASK
+	and	r4, r4, r5	
+	ldr	r5, =MSAR_SYSCLCK_267
+	cmp	r4, r5
+	beq	slow_dram_clock_rtt
+	ldr	r5, =MSAR_SYSCLCK_300
+	cmp	r4, r5
+	beq	slow_dram_clock_rtt
+	ldr	r5, =MSAR_SYSCLCK_333
+	cmp	r4, r5
+	beq	fast_dram_clock_rtt
+	ldr	r5, =MSAR_SYSCLCK_400
+	cmp	r4, r5
+	beq	fast_dram_clock_rtt
+
+	b	slow_dram_clock_rtt
+
+fast_dram_clock_rtt:
+        ldr	r4, =DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10)
+	b odt_config_end
+#endif
+slow_dram_clock_rtt:
+        ldr	r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10)
+	b odt_config_end
+
+single_dimm_odt:
+        /* Set SDRAM ODT control low register */        
+        ldr	r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7)
+
+        /* Set DUNIT ODT control register */
+        ldr	r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9)
+
+        /* Set SDRAM Extended Mode register */
+        ldr	r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_DV
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10)
+
+odt_config_end:
+        /* SDRAM ODT control high register is left as default */
+        MV_REG_READ_ASM (r4, r5, DDR2_SDRAM_ODT_CTRL_HIGH_REG)
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG8)
+
+        /*Read CL and set the DDR2 registers accordingly */
+        MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG2)
+        and r6, r6, #SDRAM_CL_MASK
+        mov r4, r6
+        orr r4, r4, r6, LSL #4
+        orr r4, r4, r6, LSL #8
+        orr r4, r4, r6, LSL #12
+        mov r5, #0x30000
+        add r4, r4, r5
+        sub r4, r4, #0x30
+        /* Set SDRAM Ddr2 Timing Low register */
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG11)
+
+        /* Set SDRAM Ddr2 Timing High register */
+        mov r4, r4, LSR #4
+        MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG12)
+
+timeParamDone:        
+	/* Close all windows */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0))
+        and	r6, r6,#~SCSR_SIZE_MASK
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0))
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1))
+        and	r6, r6,#~SCSR_SIZE_MASK
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1))
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+        and	r6, r6,#~SCSR_SIZE_MASK
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3))
+        and	r6, r6,#~SCSR_SIZE_MASK
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3))
+
+        /* Set sdram bank 0 size and enable it */
+	ldr	r6, =0
+	bl _mvDramIfGetDimmSizeFromSpd
+#ifdef MV78XX0
+	/* Check DRAM width */
+        MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG)
+	ldr	r5, =SDRAM_DWIDTH_MASK
+	and	r4, r4, r5	
+	ldr	r5, =SDRAM_DWIDTH_64BIT
+	cmp	r4, r5
+	beq	dram_64bit_width
+	/* Utilize only 32bit width */
+	mov	r8, r8, LSR #1
+#else
+	/* Utilize only 16bit width */
+	mov	r8, r8, LSR #2
+#endif
+dram_64bit_width:
+	/* Update first dimm size return value R8 */
+        MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,0))
+        ldr	r6, =~SCSR_SIZE_MASK	
+	and	r5, r5, r6
+	orr	r5, r5, r8
+        MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,0))
+
+	/* Clear bank 2 size */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+        and	r6, r6,#~SCSR_SIZE_MASK	
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+
+	/* Check for second dimm */
+	MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14)
+	cmp	r6, #1
+	bne 	defualt_order
+
+        /* Set sdram bank 2 size */
+	ldr	r6, =2
+	bl _mvDramIfGetDimmSizeFromSpd
+#ifdef MV78XX0
+	/* Check DRAM width */
+        MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG)
+	ldr	r5, =SDRAM_DWIDTH_MASK
+	and	r4, r4, r5	
+	ldr	r5, =SDRAM_DWIDTH_64BIT
+	cmp	r4, r5
+	beq	dram_64bit_width2
+	/* Utilize only 32bit width */
+	mov	r8, r8, LSR #1
+#else
+	/* Utilize only 16bit width */
+	mov	r8, r8, LSR #2
+#endif
+dram_64bit_width2:
+	/* Update first dimm size return value R8 */
+        MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,2))
+        ldr	r6, =~SCSR_SIZE_MASK	
+	and	r5, r5, r6
+	orr	r5, r5, r8
+        MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,2))
+
+	/* Close windows 1 and 3 */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1))
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1))
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3))
+        and	r6, r6,#~1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3))
+
+	/* Check dimm size for setting dram bank order */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0))
+        MV_REG_READ_ASM (r4, r5, SDRAM_SIZE_REG(0,2))
+        and	r6, r6,#SCSR_SIZE_MASK	
+        and	r4, r4,#SCSR_SIZE_MASK	
+	cmp	r6, r4
+	bge	defualt_order
+
+	/* Bank 2 is biger then bank 0 */
+	ldr	r6,=0
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_BASE_ADDR_REG(0,2))
+
+	/* Open win 2 */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+        orr	r6, r6,#1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2))
+
+	ldr	sp,=0
+	bl	_mvDramIfConfig
+#ifdef MV78XX0
+	/* Init ECC on CS 2 */
+	ldr	r0, =2
+	bl	_mvDramIfEccMemInit
+#endif
+        mov     PC, r11         /* r11 is saved link register */
+
+defualt_order:
+
+	/* Open win 0 */
+        MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0))
+        orr	r6, r6,#1
+        MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0))
+
+	ldr	sp,=0
+	bl	_mvDramIfConfig
+#ifdef MV78XX0
+	/* Init ECC on CS 0 */
+	ldr	r0, =0
+	bl	_mvDramIfEccMemInit
+#endif
+exit_ddrAutoConfig:
+        mov     PC, r11         /* r11 is saved link register */
+
+
+/***************************************************************************************/
+/*       r4 holds I2C EEPROM address
+ *       r7 holds I2C EEPROM offset parameter for i2cRead and its --> returned value
+ *       r8 holds SDRAM various configuration registers value.
+ *	r13 holds Link register
+ */
+/**************************/
+_getDensity:
+	mov     r13, LR                            /* Save link register */
+
+	/* Read SPD rank size from DIMM0 */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR       /* reading from DIMM0      */
+
+	cmp	r6, #0
+	beq	1f
+
+	/* Read SPD rank size from DIMM1 */
+        mov     r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1            */
+
+1:
+        mov     r7, #NUM_OF_ROWS_OFFSET            /* offset  3               */
+        bl      _i2cRead
+        mov     r8, r7                             /* r8 save number of rows  */
+
+        mov     r7, #NUM_OF_COLS_OFFSET            /* offset  4               */
+        bl      _i2cRead
+        add     r8, r8, r7                         /* r8 = number of rows + number of col */
+
+        mov     r7, #0x1
+        mov     r8, r7, LSL r8                     /* r8 = (1 << r8)          */
+
+        mov     r7, #SDRAM_WIDTH_OFFSET            /* offset 13 */
+        bl      _i2cRead
+        mul     r8, r7, r8
+
+        mov     r7, #NUM_OF_BANKS_OFFSET           /* offset 17               */
+        bl      _i2cRead
+        mul     r7, r8, r7
+
+	mov     PC, r13
+
+/**************************/
+_get_width:
+	mov     r13, LR                 /* Save link register */
+
+	/* Read SPD rank size from DIMM0 */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+
+	cmp	r6, #0
+	beq	1f
+
+	/* Read SPD rank size from DIMM1 */
+        mov     r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1            */
+
+1:
+        /* Get SDRAM width (SPD offset 13) */
+        mov     r7, #SDRAM_WIDTH_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+
+	mov     PC, r13
+
+/**************************/
+_get_CAL:
+	mov     r13, LR                 /* Save link register */
+
+        /* Set maximum CL supported by DIMM */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #SUPPORTED_CL_OFFSET     /* offset  18 */
+        bl      _i2cRead
+
+	mov     PC, r13
+
+/**************************/
+/* R8 - sdram configuration register.
+ * Return value in flag if no-registered then Z-flag is set
+ */
+_is_Registered:
+	mov     r13, LR                 /* Save link register */
+#if defined(MV645xx)
+        /* Get registered/non registered info from DIMM */
+        tst     r8, #SDRAM_DTYPE_DDR2
+        bne     regDdr2
+
+regDdr1:
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #SDRAM_MODULES_ATTR_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+
+        tst     r7, #0x2
+	b	exit
+#endif
+regDdr2:
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #DIMM_TYPE_INFO_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+
+        tst     r7, #0x11               /* DIMM type = regular RDIMM (0x01)   */
+                                        /* or Mini-RDIMM (0x10)               */
+exit:
+        mov     PC, r13
+
+
+/**************************/
+/* Return value in flag if no-Ecc then Z-flag is set */
+_is_Ecc:
+	mov     r13, LR                 /* Save link register */
+
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #DIMM_CONFIG_TYPE
+        bl      _i2cRead                /* result in r7                       */
+
+        tst     r7, #0x2               /* bit 1 -> Data ECC */
+        mov     PC, r13
+
+/**************************/
+/* Return value in flag if no second DIMM then Z-flag is set */
+_is_Second_Dimm_Exist:
+	mov     r13, LR                 /* Save link register */
+
+        mov     r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM0            */
+        mov     r7, #DIMM_TYPE_OFFSET
+        bl      _i2cRead                /* result in r7                       */
+
+     	tst     r7, #0x8               /* bit3 is '1' -> DDR 2 */
+        mov     PC, r13
+
+/*******************************************************************************
+* _mvDramIfGetDimmSizeFromSpd  - read bank 0 dram's size
+*
+* DESCRIPTION:
+*       The function will read the bank 0 dram size(SPD version 1.0 and above )  
+*
+* INPUT:
+*       r6 - dram bank number.
+*
+* OUTPUT:
+*	none
+*/
+_mvDramIfGetDimmSizeFromSpd:
+
+	mov     r13, LR                 /* Save link register */
+	
+	/* Read SPD rank size from DIMM0 */
+        mov     r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0            */
+
+	cmp	r6, #0
+	beq	1f
+
+	/* Read SPD rank size from DIMM1 */
+        mov     r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1            */
+
+1:
+        mov     r7, #RANK_SIZE_OFFSET	/* offset  31 */
+        bl      _i2cRead  
+	
+pass_read:
+      	ldr     r8, =(0x7 << SCSR_SIZE_OFFS)
+        cmp	r7, #DRAM_RANK_DENSITY_128M
+        beq     endDimmSize
+
+      	ldr     r8, =(0xf << SCSR_SIZE_OFFS)
+        cmp	r7, #DRAM_RANK_DENSITY_256M
+        beq     endDimmSize
+        
+        ldr     r8, =(0x1f << SCSR_SIZE_OFFS)
+        cmp	r7, #DRAM_RANK_DENSITY_512M
+        beq     endDimmSize
+        
+        ldr     r8, =(0x3f << SCSR_SIZE_OFFS)
+        cmp	r7, #DRAM_RANK_DENSITY_1G
+        beq     endDimmSize
+
+        ldr     r8, =(0x7f  << SCSR_SIZE_OFFS)     /* DRAM_RANK_DENSITY_2G */
+endDimmSize:
+        mov     PC, r13
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S
new file mode 100644
index 0000000..88527e5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S
@@ -0,0 +1,528 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvDramIfBasicAsm.s
+*
+* DESCRIPTION:
+*       Memory full detection and best timing configuration is done in 
+*       C code. C runtime environment requires a stack. This module API 
+*       initialize DRAM interface chip select 0 for basic functionality for 
+*       the use of stack.
+*       The module API assumes DRAM information is stored in I2C EEPROM reside
+*       in a given I2C address MV_BOARD_DIMM0_I2C_ADDR. The I2C EEPROM 
+*       internal data structure is assumed to be orgenzied in common DRAM 
+*       vendor SPD structure.
+*       NOTE: DFCDL values are assumed to be already initialized prior to 
+*       this module API activity.
+*       
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+/* includes */
+#define	_ASMLANGUAGE
+#define MV_ASMLANGUAGE
+#include "mvOsAsm.h"
+#include "mvSysHwConfig.h"
+#include "mvDramIfRegs.h"
+#include "mvDramIfConfig.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+#include "pex/mvPexRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "mvCommon.h"
+
+/* defines  */
+
+/* locals   */
+.data
+.globl _mvDramIfConfig
+.text
+.globl _mvDramIfMemInit
+
+/*******************************************************************************
+* _mvDramIfConfig - Basic DRAM interface initialization.
+*
+* DESCRIPTION:
+*       The function will initialize the following DRAM parameters using the
+*       values prepared by mvDramIfDetect routine. Values are located
+*       in predefined registers.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+
+_mvDramIfConfig:      
+        
+        /* Save register on stack */
+	cmp	sp, #0
+	beq	no_stack_s
+save_on_stack:
+        stmdb	sp!, {r1, r2, r3, r4}
+no_stack_s:
+
+	/* Dunit FTDLL Configuration Register */
+	/* 0) Write to SDRAM FTDLL coniguration register */
+        ldr     r4, = SDRAM_FTDLL_REG_DEFAULT_LEFT;
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_LEFT_REG)
+        str     r4, [r1]
+        ldr     r4, = SDRAM_FTDLL_REG_DEFAULT_RIGHT;
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_RIGHT_REG)
+        str     r4, [r1]
+        ldr     r4, = SDRAM_FTDLL_REG_DEFAULT_UP;
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_UP_REG)
+        str     r4, [r1]
+
+	/* 1) Write to SDRAM coniguration register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG1)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_CONFIG_REG)
+        str     r4, [r1]
+        
+	/* 2) Write Dunit control low register */ 
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG3)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_REG)
+        str     r4, [r1]
+        
+	/* 2) Write Dunit control high register */ 
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG13)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_HI_REG)
+        str     r4, [r1]
+        
+        /* 3) Write SDRAM address control register */ 
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG4)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_ADDR_CTRL_REG)
+        str     r4, [r1]
+#if defined(MV_STATIC_DRAM_ON_BOARD)
+        /* 4) Write SDRAM bank 0 size register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG0)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_SIZE_REG(0,0))
+        str     r4, [r1]
+#endif
+                          
+        /* 5) Write SDRAM open pages control register */
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_OPEN_PAGE_CTRL_REG)
+        ldr     r4, =SDRAM_OPEN_PAGES_CTRL_REG_DV
+        str     r4, [r1]
+                          
+        /* 6) Write SDRAM timing Low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG5)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_LOW_REG)
+        str     r4, [r1]
+        
+        /* 7) Write SDRAM timing High register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG6)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_HIGH_REG)
+        str     r4, [r1]
+                
+        /* Config DDR2 On Die Termination (ODT) registers */
+        /* Write SDRAM DDR2 ODT control low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG7)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_LOW_REG)
+        str     r4, [r1]
+        
+        /* Write SDRAM DDR2 ODT control high register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG8)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_HIGH_REG)
+        str     r4, [r1]
+        
+        /* Write SDRAM DDR2 Dunit ODT control register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG9)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + DDR2_DUNIT_ODT_CONTROL_REG)
+        str     r4, [r1]
+        
+        /* Write DDR2 SDRAM timing Low register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG11)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_LO_REG)
+        str     r4, [r1]
+                                   
+        /* Write DDR2 SDRAM timing High register */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG12)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_HI_REG)
+        str     r4, [r1]
+
+        /* 8) Write SDRAM mode register */ 
+        /* The CPU must not attempt to change the SDRAM Mode register setting */
+        /* prior to DRAM controller completion of the DRAM initialization     */
+        /* sequence. To guarantee this restriction, it is recommended that    */
+        /* the CPU sets the SDRAM Operation register to NOP command, performs */
+        /* read polling until the register is back in Normal operation value, */
+        /* and then sets SDRAM Mode register to its new value.               */
+        
+	/* 8.1 write 'nop' to SDRAM operation */
+        mov     r4, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM(r4, r1, SDRAM_OPERATION_REG)
+       
+        /* 8.2 poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll1:        
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll1
+
+        /* 8.3 Now its safe to write new value to SDRAM Mode register         */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG2)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_MODE_REG)
+        str     r4, [r1]
+
+        /* 8.4 Make the Dunit write the DRAM its new mode                     */       
+        mov     r4, #0x3                 /* Mode Register Set command  */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+               
+        /* 8.5 poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll2:        
+        ldr     r4, [r1]                     
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll2
+
+        /* Now its safe to write new value to SDRAM Extended Mode regist */
+        ldr     r1, =(INTER_REGS_BASE + DRAM_BUF_REG10)
+        ldr     r4, [r1]
+        ldr     r1, =(INTER_REGS_BASE + SDRAM_EXTENDED_MODE_REG)
+        str     r4, [r1]
+
+        /* 9) Write SDRAM Extended mode register This operation should be     */
+        /*    done for each memory bank                                       */ 
+        /* write 'nop' to SDRAM operation */
+        mov     r4, #0x5                 /* 'NOP' command              */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+       
+        /* poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll3:        
+        ldr     r4, [r1]
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll3
+        /* Go over each of the Banks */
+        ldr     r3, =0          /* r3 = DRAM bank Num */
+
+extModeLoop:        
+        /* Set the SDRAM Operation Control to each of the DRAM banks          */
+        mov     r4, r3   /* Do not swap the bank counter value */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_CTRL_REG)
+        
+        /* Make the Dunit write the DRAM its new mode                     */       
+        mov     r4, #0x4        /* Extended Mode Register Set command  */
+        MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG)
+               
+        /* poll SDRAM operation. Make sure its back to normal operation   */
+_sdramOpPoll4:        
+        ldr     r4, [r1]                     
+        cmp     r4, #0                          /* '0' = Normal SDRAM Mode    */
+        bne     _sdramOpPoll4
+
+        add     r3, r3, #1
+        cmp     r3, #4         /* 4 = Number of banks */
+        bne     extModeLoop
+        
+extModeEnd:	
+cmp	sp, #0
+	beq	no_stack_l
+	mov     r1, LR                        	/* Save link register */
+#if defined(MV78XX0)
+	bl   	_mvDramIfMemInit 
+#endif
+	mov	LR,r1				/* restore link register */
+load_from_stack:
+	/* Restore registers */
+        ldmia	sp!, {r1, r2, r3, r4}
+no_stack_l:
+           
+        mov     pc, lr
+
+
+/*******************************************************************************
+* _mvDramIfEccMemInit - Basic DRAM ECC initialization.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+#define XOR_CHAN0         0   /* XOR channel 0 used for memory initialization */
+#define XOR_UNIT0         0   /* XOR unit 0 used for memory initialization */
+#define XOR_ADDR_DEC_WIN0 0   /* Enable DRAM access using XOR decode window 0 */ 
+/* XOR engine register offsets macros */
+#define XOR_CONFIG_REG(chan)                (XOR_UNIT_BASE(0) + 0x10 + ((chan)    * 4))
+#define XOR_ACTIVATION_REG(chan)            (XOR_UNIT_BASE(0) + 0x20 + ((chan)    * 4))
+#define XOR_CAUSE_REG			            (XOR_UNIT_BASE(0) + 0x30)
+#define XOR_ERROR_CAUSE_REG                 (XOR_UNIT_BASE(0) + 0x50)             
+#define XOR_ERROR_ADDR_REG                  (XOR_UNIT_BASE(0) + 0x60)             
+#define XOR_INIT_VAL_LOW_REG                (XOR_UNIT_BASE(0) + 0x2E0)
+#define XOR_INIT_VAL_HIGH_REG               (XOR_UNIT_BASE(0) + 0x2E4)
+#define XOR_DST_PTR_REG(chan)               (XOR_UNIT_BASE(0) + 0x2B0 + ((chan)    * 4))
+#define XOR_BLOCK_SIZE_REG(chan)            (XOR_UNIT_BASE(0) + 0x2C0 + ((chan)    * 4))
+
+/* XOR Engine Address Decoding Register Map */                  
+#define XOR_WINDOW_CTRL_REG(unit,chan)     (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4)))
+#define XOR_BASE_ADDR_REG(unit,winNum)     (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4)))
+#define XOR_SIZE_MASK_REG(unit,winNum)     (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4)))
+
+.globl _mvDramIfEccMemInit
+/*******************************************************************************
+* _mvDramIfEccMemInit  - mem init for dram cs
+*
+* DESCRIPTION:
+*       This function will clean the cs by ussing the XOR mem init.  
+*
+* INPUT:
+*       r0 - dram bank number.
+*
+* OUTPUT:
+*	none
+*/
+_mvDramIfEccMemInit:      
+        
+        /* Save register on stack */
+	cmp	sp, #0
+	beq	no_stack_s1
+save_on_stack1:
+        stmdb	sp!, {r0,r1, r2, r3, r4, r5, r6}
+no_stack_s1:
+
+	ldr	r1, = 0             
+
+        /* Disable all XOR address decode windows to avoid possible overlap */
+        MV_REG_WRITE_ASM (r1, r5, (XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0)))
+
+        /* Init r5 to first XOR_SIZE_MASK_REG */
+		mov		r5, r0, LSL #3
+        add     r5, r5,#0x1500
+        add     r5, r5,#0x04
+        add     r5, r5,#(INTER_REGS_BASE)
+        ldr     r6, [r5]
+        HTOLL(r6,r5)
+        MV_REG_WRITE_ASM (r6, r5, XOR_SIZE_MASK_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0))
+       
+	mov		r5, r0, LSL #3
+        add     r5, r5,#0x1500
+        add     r5, r5,#(INTER_REGS_BASE)
+        ldr     r6, [r5]
+        /* Update destination & size */
+        MV_REG_WRITE_ASM(r6, r5, XOR_DST_PTR_REG(XOR_CHAN0))
+        HTOLL(r6,r5)
+        /* Init r6 to first XOR_BASE_ADDR_REG */
+	ldr	r4, = 0xf              
+	ldr	r5, = 0x1
+	mov	r5, r5, LSL r0
+	bic	r4, r4, r5
+	mov 	r4, r4, LSL #8
+
+        orr	r6, r6, r4
+        MV_REG_WRITE_ASM (r6, r5, XOR_BASE_ADDR_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0))
+        
+	ldr	r6, = 0xff0001              
+        MV_REG_WRITE_ASM (r6, r5, XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0))        
+
+        /* Configure XOR engine for memory init function.           */
+        MV_REG_READ_ASM (r6, r5, XOR_CONFIG_REG(XOR_CHAN0))
+        and	r6, r6, #~0x7        	/* Clear operation mode field      */
+        orr     r6, r6, #0x4             /* Set operation to memory init    */
+        MV_REG_WRITE_ASM(r6, r5, XOR_CONFIG_REG(XOR_CHAN0))
+               
+        /* Set initVal in the XOR Engine Initial Value Registers       */
+	ldr	r6, = 0xfeedfeed              
+        MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_LOW_REG)
+	ldr	r6, = 0xfeedfeed              
+        MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_HIGH_REG)
+
+        /* Set block size using DRAM bank size  */
+
+	mov	r5, r0, LSL #3
+        add     r5, r5,#0x1500
+        add     r5, r5,#0x04
+        add     r5, r5,#(INTER_REGS_BASE)
+
+        ldr     r6, [r5]
+        HTOLL(r6,r5)
+	and	r6, r6, #SCSR_SIZE_MASK
+	mov	r5, r6, LSR #SCSR_SIZE_OFFS
+        add	r5, r5, #1
+	mov	r6, r5, LSL #SCSR_SIZE_OFFS
+        MV_REG_WRITE_ASM(r6, r5, XOR_BLOCK_SIZE_REG(XOR_CHAN0))
+        
+        /* Clean interrupt cause*/
+        MV_REG_WRITE_ASM(r1, r5, XOR_CAUSE_REG)
+
+        /* Clean error interrupt cause*/
+        MV_REG_READ_ASM(r6, r5, XOR_ERROR_CAUSE_REG)
+        MV_REG_READ_ASM(r6, r5, XOR_ERROR_ADDR_REG)
+
+        /* Start transfer */
+        MV_REG_READ_ASM (r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0))
+        orr     r6, r6, #0x1 /* Preform start command      */
+        MV_REG_WRITE_ASM(r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0))
+
+        /* Wait for engine to finish */
+waitForComplete:        
+        MV_REG_READ_ASM(r6, r5, XOR_CAUSE_REG)
+        and   	r6, r6, #2
+	cmp	r6, #0
+        beq     waitForComplete
+
+        /* Clear all error report registers */
+        MV_REG_WRITE_ASM(r1, r5, SDRAM_SINGLE_BIT_ERR_CNTR_REG)
+        MV_REG_WRITE_ASM(r1, r5, SDRAM_DOUBLE_BIT_ERR_CNTR_REG)
+
+        MV_REG_WRITE_ASM(r1, r5, SDRAM_ERROR_CAUSE_REG)
+
+	cmp	sp, #0
+	beq	no_stack_l1
+load_from_stack1:
+        ldmia	sp!, {r0, r1, r2, r3, r4, r5, r6}
+no_stack_l1:
+        mov     pc, lr
+
+
+/*******************************************************************************
+* mvDramIfMemInit - Use XOR to clear all memory.
+*
+* DESCRIPTION:
+*       Use assembler function _mvDramIfEccMemInit to fill all memory with FEADFEAD pattern.
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+#if defined(MV78XX0)
+
+_mvDramIfMemInit:
+        stmdb	sp!, {r0,r1, r2, r3, r4, r5, r6}
+	mov     r6, LR                 /* Save link register */
+    	/* Check if dram bank 0 has to be init for ECC */
+	MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,0))
+	and 	r3, r0, #SCSR_WIN_EN
+        cmp     r3, #0 
+	beq   	no_bank_0
+	MV_REG_READ_ASM(r0, r5,  SDRAM_BASE_ADDR_REG(0,0))
+        cmp     r0, #0 
+	beq   	no_bank_0
+	mov	r0,#0
+	bl	_mvDramIfEccMemInit
+
+no_bank_0:
+    	/* Check if dram bank 1 has to be init for ECC */
+        MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,1))
+	and 	r0, r0, #SCSR_WIN_EN
+        cmp     r0, #0 
+	beq   	no_bank_1
+	mov	r0,#1
+	bl	_mvDramIfEccMemInit
+no_bank_1:
+    	/* Check if dram bank 2 has to be init for ECC */
+    	MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,2))
+	and 	r0, r0, #SCSR_WIN_EN
+        cmp     r0, #0 
+	beq   	no_bank_2
+	MV_REG_READ_ASM(r0, r5,  SDRAM_BASE_ADDR_REG(0,2))
+        cmp     r0, #0 
+	beq   	no_bank_2
+	mov	r0,#2
+	bl	_mvDramIfEccMemInit
+
+no_bank_2:
+    	/* Check if dram bank 3 has to be init for ECC */
+	MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,3))
+	and 	r0, r0, #SCSR_WIN_EN
+	cmp     r0, #0 
+	beq   	no_bank_3
+	mov	r0,#3
+	bl	_mvDramIfEccMemInit
+no_bank_3:
+	mov     LR ,r6                /* restore link register */
+	ldmia	sp!, {r0, r1, r2, r3, r4, r5, r6}
+	mov     pc, lr
+#endif
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt
new file mode 100644
index 0000000..3afa556
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.3
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt
new file mode 100644
index 0000000..0f06026
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.2
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt
new file mode 100644
index 0000000..5f39390
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt
new file mode 100644
index 0000000..3afa556
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.3
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt
new file mode 100644
index 0000000..3afa556
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.3
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt
new file mode 100644
index 0000000..40fea93
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt
@@ -0,0 +1,4 @@
+Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.5
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S
new file mode 100644
index 0000000..9d81ef2
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S
@@ -0,0 +1,457 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#define MV_ASMLANGUAGE
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "boardEnv/mvBoardEnvSpec.h"
+#include "mvOsAsm.h"
+#include "mvTwsiSpec.h"
+#include "mvSysHwConfig.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+#include "mvCommon.h"
+
+#define I2C_CH MV_BOARD_DIMM_I2C_CHANNEL
+
+/* defines */
+/* defines  */
+
+
+        .data
+        .global _i2cInit
+        .global _i2cRead
+
+        .text
+
+/*******************************************************************************
+* _i2cInit - Initialize TWSI interface
+*
+* DESCRIPTION:
+*       The function performs TWSI interface initialization. It resets the 
+*       TWSI state machine and initialize its clock to 100KHz assuming Tclock
+*       of 133MHz.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+_i2cInit:        
+        mov     r9, LR     /* Save link register */
+        mov     r0, #0     /* Make sure r0 is zero */        
+       	
+        /* Reset the i2c Mechanism first */
+        MV_REG_WRITE_ASM (r0, r1, TWSI_SOFT_RESET_REG(I2C_CH))
+
+        bl      _twsiDelay        
+        bl      _twsiDelay              
+
+        /* Initializing the I2C mechanism. Assuming Tclock frequency          */
+        /* of 166MHz. The I2C frequency in that case will be 100KHz.          */
+        /* For this settings, M = 9 and N = 3. Set the baud-rate with the     */
+        /* value of 0x2b (freq of ==> 100KHz                                  */
+        /* see spec for more details about the calculation of this value)     */
+        mov     r6, #(9 << 3 | 3)
+        MV_REG_WRITE_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        
+        /* Enable the I2C master */
+	/* Enable TWSI interrupt in main mask reg */
+        mov     r6, #0xC4
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        
+        /* Let the slow TWSI machine get used to the idea that it is enabled  */
+        bl      _twsiDelay
+        
+        
+        mov     PC, r9         /* r9 is saved link register */
+
+/*******************************************************************************
+* _twsiDelay - Perform delay.
+*
+* DESCRIPTION:
+*       The function performs a delay to enable TWSI logic to stable.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+_twsiDelay:
+        mov     r10, #0x100000 /*was 0x400*/ 
+    
+_twsiDelayLoop:
+        subs    r10, r10, #1
+        bne     _twsiDelayLoop
+        
+        mov     PC, LR
+
+/*******************************************************************************
+* _i2cRead - Read byte from I2C EEPROM device.
+*
+* DESCRIPTION:
+*       The function returns a byte from I2C EEPROM device. 
+*       The EEPROM device is 7-bit address type. 
+*
+* INPUT:
+*       r4 has the DIMM0 base address with shift 1 bit to the left
+*       r7 has the EEPROM offset
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       r4 returns '0' if address can not be read.
+*       r7 has byte value in case read is successful.
+*
+*******************************************************************************/
+_i2cRead:
+        mov     r9, LR     /* Save link register */
+       
+        /* Transmit the device address and desired offset within the EEPROM. */
+        
+        /* Generate Start Bit */
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        orr     r6, r6, #TWSI_CONTROL_START_BIT
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+
+        /* Wait for the interrupt flag (bit3) to be set  */
+        mov     r10, #0x50000        
+loop_1:
+        subs    r10, r10, #1
+        beq     loop_1_timeout
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) 
+        tst     r6, #BIT5
+#endif
+        beq     loop_1
+            
+loop_1_timeout:        
+            
+        /* Wait for the start bit to be reset by HW */
+        mov     r10, #0x50000 
+loop_2:
+        subs    r10, r10, #1
+        beq     loop_2_timeout
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        tst     r6, #TWSI_CONTROL_START_BIT
+        bne     loop_2
+           
+loop_2_timeout:
+
+        /* Wait for the status TWSI_START_CONDITION_TRA = 0x8 */
+        mov     r10, #0x50000
+loop_3:
+        subs    r10, r10, #1
+        beq     loop_3_timeout
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x08
+        bne     loop_3
+        
+loop_3_timeout:
+        
+        /* writing the address of (DIMM0/1 << 1) with write indication */
+        mov     r6, r4, LSL #1 /* Write operation address bit 0 must be 0 */
+        MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH))
+        
+        bl      _twsiDelay
+        /* Clear the interrupt flag */
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+        
+        /* Waiting for the interrupt flag to be set which means that the
+           address has been transmitted                                  */
+loop_4:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_4       /* if tst = 0, then the bit is not set yet */
+        
+        /* Wait for status TWSI_ADDR_PLUS_WRITE_BIT_TRA_ACK_REC = 0x18 */
+        mov     r10, #0x50000         /* Set r10 to 0x50000 =~ 328,000 */
+
+loop_5:
+        subs    r10, r10, #1          /* timeout count down         */
+        bne     testStatus
+        mov     r4, #0                /* r4 = 0 -> operation failed */  
+        b       exit_i2cRead          /* Exit if timeout (No DIMM)  */
+
+testStatus:    
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x18
+        bne     loop_5
+                
+
+        /* check if the offset is bigger than 256 byte*/
+        tst     r7, #0x80000000
+        bne     great_than_256
+                        
+        /* Write the offset to be read from the DIMM EEPROM */
+        MV_REG_WRITE_ASM (r7, r1, TWSI_DATA_REG(I2C_CH))
+        
+        b after_offset
+        
+great_than_256:
+        mov     r10, r7, LSR #8
+        and     r10, r10, #0xff
+        /* Write the offset0 to be read from the  EEPROM */
+        MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH))
+        
+        /* Clear the interrupt flag ==> signaling that the address can now
+           be transmited                                                    */
+        
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+    
+        /* Wait for the interrupt to be set again ==> address has transmited */
+loop_6_1:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_6_1
+        
+        /* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */
+loop_7_1:
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x28
+        bne     loop_7_1
+        
+        
+        mov     r10, r7
+        and     r10, r10, #0xff
+        /* Write the offset1 to be read from the  EEPROM */
+        MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH))
+        
+        
+        
+after_offset:                
+        
+        /* Clear the interrupt flag ==> signaling that the address can now
+           be transmited                                                    */
+        
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+    
+        /* Wait for the interrupt to be set again ==> address has transmited */
+loop_6:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_6
+        
+        /* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */
+loop_7:
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x28
+        bne     loop_7
+        
+        /* Retransmit the device address with read indication to get the data */
+        
+        /* generate a repeated start bit */
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        orr     r6, r6, #TWSI_CONTROL_START_BIT
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+
+        
+        /* Clear the interrupt flag ==> the start bit will be transmitted. */ 
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+        
+       /* Wait for the interrupt flag (bit3) to be set */
+loop_9:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_9
+
+        /* Wait for the start bit to be reset by HW */
+loop_8:
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) 
+        tst     r6, #TWSI_CONTROL_START_BIT
+        bne     loop_8
+        
+        /* Wait for status TWSI_REPEATED_START_CONDITION_TRA = 0x10 */
+loop_10:
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x10
+        bne     loop_10
+        
+        /* Writing the address of (DIMM0<<1) with read indication (bit0 is 1) */
+        mov     r6, r4, LSL #1
+        orr     r6, r6, #1     /* Read operation address bit 0 must be 1 */
+        MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH))
+        
+        /* Clear the interrupt flag ==> the address will be transmitted */
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+        
+        /* Wait for the interrupt flag (bit3) to be set as a result of
+           transmitting the address.                                     */
+loop_11:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_11
+        
+         /* Wait for status TWSI_ADDR_PLUS_READ_BIT_TRA_ACK_REC = 0x40 */
+loop_12:
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x40
+        bne     loop_12
+        
+        /* Clear the interrupt flag and the Acknoledge bit */
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #(TWSI_CONTROL_INT_FLAG_SET | TWSI_CONTROL_ACK)
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+        
+        /* Wait for the interrupt flag (bit3) to be set */
+loop_14:
+#ifdef MV78XX0
+        MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
+        tst     r6, #BIT2
+#else
+        MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
+        tst     r6, #BIT5
+#endif
+        beq     loop_14
+        
+        /* Wait for status TWSI_MAS_REC_READ_DATA_ACK_NOT_TRA = 0x58 */
+loop_15:
+        MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
+        cmp     r6, #0x58
+        bne     loop_15
+        
+        /* Store the data in r7. */
+        MV_REG_READ_ASM (r7, r1, TWSI_DATA_REG(I2C_CH))
+        
+        /* Generate stop bit */
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        orr     r6, r6, #TWSI_CONTROL_STOP_BIT
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+
+        
+        /* Clear the interrupt flag  */
+        bl      _twsiDelay
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bic     r6, r6, #TWSI_CONTROL_INT_FLAG_SET
+        MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        bl      _twsiDelay
+        
+        /* Wait for the stop bit to be reset by HW */
+loop_16:
+        MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
+        tst     r6, #TWSI_CONTROL_INT_FLAG_SET
+        bne     loop_16
+
+exit_i2cRead:
+        mov     PC, r9         /* r9 is saved link register */
diff --git a/target/linux/generic/files/crypto/ocf/ocf-compat.h b/target/linux/generic/files/crypto/ocf/ocf-compat.h
index b76c369..4ad1223 100644
--- a/target/linux/generic/files/crypto/ocf/ocf-compat.h
+++ b/target/linux/generic/files/crypto/ocf/ocf-compat.h
@@ -287,6 +287,8 @@ static inline void *sg_virt(struct scatterlist *sg)
 
 #define sg_init_table(sg, n)
 
+#define sg_mark_end(sg)
+
 #endif
 
 #ifndef late_initcall
@@ -359,13 +361,9 @@ static inline int ocf_run_thread(void *arg)
 #include <linux/kthread.h>
 #endif
 
-#include <linux/skbuff.h>
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)
-static inline struct page *skb_frag_page(const skb_frag_t *frag)
-{
-	return frag->page;
-}
+#define	skb_frag_page(x)	((x)->page)
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/target/linux/generic/files/crypto/ocf/safe/safe.c b/target/linux/generic/files/crypto/ocf/safe/safe.c
index 7d9b541..141640e 100644
--- a/target/linux/generic/files/crypto/ocf/safe/safe.c
+++ b/target/linux/generic/files/crypto/ocf/safe/safe.c
@@ -1944,12 +1944,10 @@ static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 		return(-ENODEV);
 	}
 
-#ifdef HAVE_PCI_SET_MWI
 	if (pci_set_mwi(dev)) {
 		printk("safe: pci_set_mwi failed!");
 		return(-ENODEV);
 	}
-#endif
 
 	sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL);
 	if (!sc)
diff --git a/target/linux/generic/patches-3.3/941-ocf_20110720.patch b/target/linux/generic/patches-3.3/941-ocf_20120127.patch
index 5ff399e..366a258 100644
--- a/target/linux/generic/patches-3.3/941-ocf_20110720.patch
+++ b/target/linux/generic/patches-3.3/941-ocf_20120127.patch
@@ -1,13 +1,3 @@
---- a/kernel/pid.c
-+++ b/kernel/pid.c
-@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi
- {
- 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
- }
-+EXPORT_SYMBOL(find_task_by_vpid);
- 
- struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
- {
 --- a/drivers/char/random.c
 +++ b/drivers/char/random.c
 @@ -130,6 +130,9 @@
@@ -120,7 +110,38 @@
  #define RTC_MINOR		135
 --- a/include/linux/random.h
 +++ b/include/linux/random.h
-@@ -54,6 +54,10 @@ extern void add_input_randomness(unsigne
+@@ -34,6 +34,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -54,6 +78,10 @@ extern void add_input_randomness(unsigne
  				 unsigned int value);
  extern void add_interrupt_randomness(int irq);
  
@@ -131,3 +152,13 @@
  extern void get_random_bytes(void *buf, int nbytes);
  void generate_random_uuid(unsigned char uuid_out[16]);
  
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {