ar71xx: add support for TP-Link TL-MR3020

This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651

10 files changed, 160 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
index ba556c1..bf46fd7 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -108,6 +108,7 @@ aw-nr580 |\
 bullet-m |\
 eap7660d |\
 rb-411 |\
+tl-mr3020 |\
 tl-wa901nd-v2 |\
 tl-wr703n |\
 wp543)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index b259b67..b26a8de 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -94,6 +94,9 @@ tplink_board_detect() {
 	"104300"*)
 		model="TP-Link TL-WR1043N/ND"
 		;;
+	"302000"*)
+		model="TP-Link TL-MR3020"
+		;;
 	"322000"*)
 		model="TP-Link TL-MR3220"
 		;;
@@ -238,6 +241,9 @@ ar71xx_board_detect() {
 	*"DIR-615 rev. C1")
 		name="dir-615-c1"
 		;;
+	*TL-MR3020)
+		name="tl-mr3020"
+		;;
 	*TL-MR3220)
 		name="tl-mr3220"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ec0d03b..c2bfa08 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -119,6 +119,7 @@ platform_check_image() {
 		}
 		return 0
 		;;
+	tl-mr3020 | \
 	tl-mr3220 | \
 	tl-mr3420 | \
 	tl-wa901nd | \
diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39
index 2a232dd..8cc92ab 100644
--- a/target/linux/ar71xx/config-2.6.39
+++ b/target/linux/ar71xx/config-2.6.39
@@ -43,6 +43,7 @@ CONFIG_AR71XX_MACH_TL_WA901ND=y
 CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
 CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR703N=y
+CONFIG_AR71XX_MACH_TL_MR3020=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND_V4=y
 CONFIG_AR71XX_MACH_TL_WR841N_V1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
index c2ccf81..90c7b69 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
@@ -277,6 +277,15 @@ config AR71XX_MACH_NBG460N
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 
+config AR71XX_MACH_TL_MR3020
+	bool "TP-LINK TL-MR3020 support"
+	select SOC_AR933X
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	select AR71XX_DEV_AR9XXX_WMAC
+
 config AR71XX_MACH_TL_MR3X20
 	bool "TP-LINK TL-MR3220/3420 support"
 	select SOC_AR724X
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
index 9d08681..0cb277e 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_AR71XX_MACH_PB92)		+= mach-pb92.o
 obj-$(CONFIG_AR71XX_MACH_RB4XX)		+= mach-rb4xx.o
 obj-$(CONFIG_AR71XX_MACH_RB750)		+= mach-rb750.o
 obj-$(CONFIG_AR71XX_MACH_TEW_632BRP)	+= mach-tew-632brp.o
+obj-$(CONFIG_AR71XX_MACH_TL_MR3020)	+= mach-tl-mr3020.o
 obj-$(CONFIG_AR71XX_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
 obj-$(CONFIG_AR71XX_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
 obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3020.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3020.c
new file mode 100644
index 0000000..6af58d1
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3020.c
@@ -0,0 +1,122 @@
+/*
+ *  TP-LINK TL-MR3020 board support
+ *
+ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ar9xxx-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+
+#define TL_MR3020_GPIO_LED_3G		27
+#define TL_MR3020_GPIO_LED_WLAN		0
+#define TL_MR3020_GPIO_LED_LAN		17
+#define TL_MR3020_GPIO_LED_WPS		26
+
+#define TL_MR3020_GPIO_BTN_WPS		11
+#define TL_MR3020_GPIO_BTN_SW1		18
+#define TL_MR3020_GPIO_BTN_SW2		20
+
+#define TL_MR3020_GPIO_USB_POWER	8
+
+#define TL_MR3020_KEYS_POLL_INTERVAL	20	/* msecs */
+#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR3020_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3020_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data tl_mr3020_flash_data = {
+	.part_probes	= tl_mr3020_part_probes,
+};
+
+static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
+	{
+		.name		= "tp-link:green:3g",
+		.gpio		= TL_MR3020_GPIO_LED_3G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:wlan",
+		.gpio		= TL_MR3020_GPIO_LED_WLAN,
+		.active_low	= 0,
+	},
+	{
+		.name		= "tp-link:green:lan",
+		.gpio		= TL_MR3020_GPIO_LED_LAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:wps",
+		.gpio		= TL_MR3020_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_MR3020_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "sw1",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_MR3020_GPIO_BTN_SW1,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "sw2",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_MR3020_GPIO_BTN_SW2,
+		.active_low	= 1,
+	}
+};
+
+static void __init tl_mr3020_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_add_device_m25p80(&tl_mr3020_flash_data);
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
+					tl_mr3020_leds_gpio);
+	ar71xx_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(tl_mr3020_gpio_keys),
+					 tl_mr3020_gpio_keys);
+
+	gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power");
+	gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1);
+	ar71xx_add_device_usb();
+
+	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+
+	ar71xx_add_device_mdio(0, 0x0);
+	ar71xx_add_device_eth(0);
+
+	ar9xxx_add_device_wmac(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020 v1",
+	     tl_mr3020_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
index cac9d55..9d363a6 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
@@ -49,6 +49,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_RB_493G,	/* Mikrotik RouterBOARD 493G */
 	AR71XX_MACH_RB_750,	/* MikroTik RouterBOARD 750 */
 	AR71XX_MACH_TEW_632BRP,	/* TRENDnet TEW-632BRP */
+	AR71XX_MACH_TL_MR3020,  /* TP-LINK TL-MR3020 */
 	AR71XX_MACH_TL_MR3220,	/* TP-LINK TL-MR3220 */
 	AR71XX_MACH_TL_MR3420,	/* TP-LINK TL-MR3420 */
 	AR71XX_MACH_TL_WA901ND,	/* TP-LINK TL-WA901ND */
diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 8e0fa29..c9f0cac 100644
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -5,6 +5,17 @@
 # See /LICENSE for more information.
 #
 
+define Profile/TLMR3020
+	NAME:=TP-LINK TL-MR3020
+	PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/TLMR3020/Description
+	Package set optimized for the TP-LINK TL-MR3020.
+endef
+$(eval $(call Profile,TLMR3020))
+
+
 define Profile/TLMR3220
 	NAME:=TP-LINK TL-MR3220
 	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
@@ -32,6 +43,7 @@ define Profile/TLWR703
 	PACKAGES:=kmod-usb-core kmod-usb2
 endef
 
+
 define Profile/TLWR703/Description
 	Package set optimized for the TP-LINK TL-WR703N.
 endef
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index ebedf57..4b90429 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -765,6 +765,11 @@ define Image/Build/Profile/OM2P
         $(call Image/Build/Template/$(fs_squash)/$(1),OpenMesh,om2p,OM2P)
 endef
 
+tlmr3020_cmdline=board=TL-MR3020 console=ttyATH0,115200
+define Image/Build/Profile/TLMR3020
+	$(call Image/Build/Template/$(fs_64k)/$(1),TPLINK-LZMA,tl-mr3020-v1,$(tlmr3020_cmdline),0x30200001,1,4Mlzma)
+endef
+
 tlmr3220_cmdline=board=TL-MR3220 console=ttyS0,115200
 define Image/Build/Profile/TLMR3220
 	$(call Image/Build/Template/$(fs_64kraw)/$(1),TPLINK,tl-mr3220-v1,$(tlmr3220_cmdline),0x32200001,1,4M)
@@ -933,6 +938,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/PB92,$(1))
 	$(call Image/Build/Profile/TEW632BRP,$(1))
 	$(call Image/Build/Profile/TEW652BRP,$(1))
+	$(call Image/Build/Profile/TLMR3020,$(1))
 	$(call Image/Build/Profile/TLMR3220,$(1))
 	$(call Image/Build/Profile/TLMR3420,$(1))
 	$(call Image/Build/Profile/TLWA901,$(1))