summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2014-02-20 17:07:51 +0000
committerGabor Juhos <juhosg@openwrt.org>2014-02-20 17:07:51 +0000
commitd19b868b12a3d76addbf0d16a854f2d5976f7608 (patch)
tree9939fcd045a29e6514f06291207aaaa98d5da9db /target/linux
parentab6e3af7fc94d3c04e13f468c56c097f88644a7c (diff)
downloadmtk-20170518-d19b868b12a3d76addbf0d16a854f2d5976f7608.zip
mtk-20170518-d19b868b12a3d76addbf0d16a854f2d5976f7608.tar.gz
mtk-20170518-d19b868b12a3d76addbf0d16a854f2d5976f7608.tar.bz2
ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39641
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c79
-rw-r--r--target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch10
2 files changed, 85 insertions, 4 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
index 8213c47..f6de80a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
@@ -36,6 +36,7 @@
#include "dev-wmac.h"
#include "machtypes.h"
#include "routerboot.h"
+#include "dev-leds-gpio.h"
#define RB95X_GPIO_NAND_NCE 14
@@ -58,6 +59,38 @@ static struct mtd_partition rb95x_nand_partitions[] = {
},
};
+static struct gpio_led rb951ui_leds_gpio[] __initdata = {
+ {
+ .name = "rb:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:act",
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port1",
+ .gpio = 13,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port2",
+ .gpio = 12,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port3",
+ .gpio = 4,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port4",
+ .gpio = 21,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port5",
+ .gpio = 16,
+ .active_low = 1,
+ }
+};
+
static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
@@ -157,6 +190,14 @@ static int __init rb95x_setup(void)
rb95x_nand_init();
+ return 0;
+}
+
+static void __init rb951g_setup(void)
+{
+ if (rb95x_setup())
+ return;
+
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_SW_ONLY_MODE);
@@ -171,17 +212,47 @@ static int __init rb95x_setup(void)
ath79_register_eth(0);
- return 0;
+ rb95x_wlan_init();
+ ath79_register_usb();
}
-static void __init rb951g_setup(void)
+MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
+ rb951g_setup);
+
+static void __init rb951ui_setup(void)
{
if (rb95x_setup())
return;
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
rb95x_wlan_init();
ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
+ rb951ui_leds_gpio);
}
-MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
- rb951g_setup);
+MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
+ rb951ui_setup);
diff --git a/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch b/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch
new file mode 100644
index 0000000..509c947
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -81,6 +81,7 @@ enum ath79_mach_type {
+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
++ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */