lantiq: use the device tree bindings from rt2x00 driver

Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>

11 files changed, 136 insertions, 170 deletions

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644
index 3aa5de4..0000000
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-# based on gabors ralink wisoc implementation
-
-rt2x00_eeprom_die() {
-	echo "rt2x00 eeprom: " "$*"
-	exit 1
-}
-
-rt2x00_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local swab=$4
-	local mtd
-
-	. /lib/functions.sh
-
-	mtd=$(find_mtd_part $part)
-	[ -n "$mtd" ] || \
-		rt2x00_eeprom_die "no mtd device found for partition $part"
-
-	if [ $swab -gt 0 ]; then
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	else
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	fi
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions/lantiq.sh
-
-case "$FIRMWARE" in
-"RT2860.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	ARV7506PW11|ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	ARV7525PW)
-		rt2x00_eeprom_extract "board_config" 1040 512 0
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"RT3062.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	VGV7510KW22)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/lantiq/dts/ARV7506PW11.dts b/target/linux/lantiq/dts/ARV7506PW11.dts
index 676c0b8..5c8b0fe 100644
--- a/target/linux/lantiq/dts/ARV7506PW11.dts
+++ b/target/linux/lantiq/dts/ARV7506PW11.dts
@@ -80,17 +80,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -152,3 +141,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts b/target/linux/lantiq/dts/ARV7510PW22.dts
index f288511..079c856 100644
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++ b/target/linux/lantiq/dts/ARV7510PW22.dts
@@ -121,24 +121,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -189,3 +171,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts
index 9c29c8c..1fa52c3 100644
--- a/target/linux/lantiq/dts/ARV7519PW.dts
+++ b/target/linux/lantiq/dts/ARV7519PW.dts
@@ -113,18 +113,6 @@
 		ifxhcd@E101000 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -222,3 +210,17 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0xf>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
index aeba079..f259c17 100644
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ b/target/linux/lantiq/dts/ARV7525PW.dts
@@ -68,12 +68,6 @@
 					};
 				};
 			};
-
-			ralink_eep {
-				compatible = "ralink,eeprom";
-				ralink,eeprom = "RT2860.eeprom";
-				reg = <0 0x3f0410 0x110>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -96,11 +90,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -150,3 +139,14 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
index d6de881..d51a70a 100644
--- a/target/linux/lantiq/dts/ARV752DPW.dts
+++ b/target/linux/lantiq/dts/ARV752DPW.dts
@@ -135,19 +135,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			interrupt-map = <0x7000 0 0 1 &icu0 135>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -231,3 +218,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	interrupt-map = <0x7000 0 0 1 &icu0 135>;
+	req-mask = <0x3>;
+
+	wifi@1814,0601 {
+		compatible = "pci1814,0601";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
index 0b0fddb..7343a5d 100644
--- a/target/linux/lantiq/dts/ARV752DPW22.dts
+++ b/target/linux/lantiq/dts/ARV752DPW22.dts
@@ -134,24 +134,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -251,3 +233,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
index 53ffbdd..b1d9eed 100644
--- a/target/linux/lantiq/dts/P2812HNUF1.dts
+++ b/target/linux/lantiq/dts/P2812HNUF1.dts
@@ -50,11 +50,6 @@
 		};
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-leds {
 		usb1: usb1 {
 			label = "p2812hnuf1:green:usb1";
@@ -66,3 +61,11 @@
 		};
 	};
 };
+
+&pci0 {
+	wifi@1814,3062 {
+		compatible = "pci1814,3062";
+		reg = <0x7000 0 0 0 0>;
+		ralink,eeprom = "RT3062.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
index 54795a3..366d034 100644
--- a/target/linux/lantiq/dts/P2812HNUF3.dts
+++ b/target/linux/lantiq/dts/P2812HNUF3.dts
@@ -54,9 +54,12 @@
 			};
 		};
 	};
+};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
+&pci0 {
+	wifi@1814,3092 {
+		compatible = "pci1814,3092";
+		reg = <0x7000 0 0 0 0>;
 		ralink,eeprom = "RT3092.eeprom";
 	};
 };
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index 8af1db7..5ca2844 100644
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -75,11 +75,6 @@
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -92,11 +87,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -167,6 +157,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index a2242bb..a7b421f 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -102,11 +102,6 @@
 			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -119,11 +114,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -214,6 +204,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3091 {
+		compatible = "pci1814,3091";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";