summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorThibaut VARENE <hacks@slashdirt.org>2017-02-07 19:10:04 +0100
committerFelix Fietkau <nbd@nbd.name>2017-02-15 11:28:58 +0100
commit8cbb2ac6332ba3be707ea6e4129c22b9320b72c1 (patch)
treede32f5efdb7ebb3d220aea027be6504bd1272216 /target/linux
parentb18bae37a4f26949f71f1345caa2b6934f6a4663 (diff)
downloadmtk-20170518-8cbb2ac6332ba3be707ea6e4129c22b9320b72c1.zip
mtk-20170518-8cbb2ac6332ba3be707ea6e4129c22b9320b72c1.tar.gz
mtk-20170518-8cbb2ac6332ba3be707ea6e4129c22b9320b72c1.tar.bz2
ar71xx: add support for RB951Ui-2nD
This patch adds support for the MikroTik RouterBOARD hAP https://routerboard.com/RB951Ui-2nD Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/03_gpio_switches4
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c147
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
9 files changed, 170 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 1d692ff..403715c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -225,6 +225,15 @@ rb-750)
rb-941-2nd)
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
+rb-951ui-2nd)
+ ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
+ ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
+ ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
+ ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
+ ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
+ ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt"
+ ;;
rb-2011l|\
rb-2011uas|\
rb-2011uias|\
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index f3dcd90..721c01c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -137,6 +137,7 @@ ar71xx_setup_interfaces()
pb42|\
pb44|\
rb-951ui-2hnd|\
+ rb-951ui-2nd|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
index 66be8e7..e76c9be 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
@@ -27,6 +27,10 @@ rb-912uag-2hpnd|\
rb-912uag-5hpnd)
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
;;
+rb-951ui-2nd)
+ ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 527e8b7..5f52389 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -299,6 +299,7 @@ get_status_led() {
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-941-2nd|\
+ rb-951ui-2nd|\
rb-mapl-2nd)
status_led="rb:green:user"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 066f8eb..a798398 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -868,6 +868,9 @@ ar71xx_board_detect() {
*"RouterBOARD 951Ui-2HnD")
name="rb-951ui-2hnd"
;;
+ *"951Ui-2nD")
+ name="rb-951ui-2nd"
+ ;;
*"RouterBOARD 2011L")
name="rb-2011l"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 43515fe..b18e87e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -344,6 +344,7 @@ platform_check_image() {
pb42|\
pb44|\
rb-941-2nd|\
+ rb-951ui-2nd|\
rb-mapl-2nd|\
routerstation-pro|\
routerstation|\
@@ -617,6 +618,7 @@ platform_pre_upgrade() {
case "$board" in
rb-941-2nd|\
+ rb-951ui-2nd|\
rb-mapl-2nd)
;;
rb*|\
@@ -654,6 +656,7 @@ platform_do_upgrade() {
case "$board" in
rb-941-2nd|\
+ rb-951ui-2nd|\
rb-mapl-2nd)
PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1
platform_do_upgrade_combined "$ARGV"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 9bca451..ef22aea 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -921,12 +921,14 @@ config ATH79_MACH_RBSPI
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
select ATH79_DEV_WMAC
select ATH79_ROUTERBOOT
help
Say 'Y' here if you want your kernel to support the
MikroTik RouterBOARD mAP lite
MikroTik RouterBOARD hAP lite
+ MikroTik RouterBOARD hAP
config ATH79_MACH_RBSXTLITE
bool "MikroTik RouterBOARD SXT Lite"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
index 5418652..8f8a4f5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@@ -3,6 +3,7 @@
*
* - MikroTik RouterBOARD mAP L-2nD
* - MikroTik RouterBOARD 941L-2nD
+ * - MikroTik RouterBOARD 951Ui-2nD
*
* Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
*
@@ -16,6 +17,9 @@
#include <linux/routerboot.h>
#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/74x164.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -40,6 +44,7 @@
#define RBSPI_HAS_USB BIT(0)
#define RBSPI_HAS_WLAN BIT(1)
#define RBSPI_HAS_WAN4 BIT(2) /* has WAN port on PHY4 */
+#define RBSPI_HAS_SSR BIT(3) /* has an SSR on SPI bus 0 */
#define RB_ROUTERBOOT_OFFSET 0x0000
#define RB_BIOS_SIZE 0x1000
@@ -166,6 +171,96 @@ static struct gpio_led rbhapl_leds[] __initdata = {
},
};
+/* common RB SSRs */
+#define RBSPI_SSR_GPIO_BASE 40
+#define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit))
+
+/* RB 951Ui-2nD gpios */
+#define RB952_SSR_BIT_LED_LAN1 0
+#define RB952_SSR_BIT_LED_LAN2 1
+#define RB952_SSR_BIT_LED_LAN3 2
+#define RB952_SSR_BIT_LED_LAN4 3
+#define RB952_SSR_BIT_LED_LAN5 4
+#define RB952_SSR_BIT_USB_POWER 5
+#define RB952_SSR_BIT_LED_WLAN 6
+#define RB952_GPIO_SSR_CS 11
+#define RB952_GPIO_LED_USER 4
+#define RB952_GPIO_POE_POWER 14
+#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
+#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
+#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
+#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3)
+#define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4)
+#define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5)
+#define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN)
+
+static struct gpio_led rb952_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RB952_GPIO_LED_USER,
+ .active_low = 0,
+ }, {
+ .name = "rb:blue:wlan",
+ .gpio = RB952_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port1",
+ .gpio = RB952_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port2",
+ .gpio = RB952_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port3",
+ .gpio = RB952_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port4",
+ .gpio = RB952_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port5",
+ .gpio = RB952_GPIO_LED_LAN5,
+ .active_low = 1,
+ },
+};
+
+static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
+ .base = RBSPI_SSR_GPIO_BASE,
+};
+
+/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */
+static int rbspi_spi_cs_gpios[] = {
+ -ENOENT, /* CS0 is always -ENOENT: natively handled */
+ -ENOENT, /* CS1 can be updated by the code as necessary */
+};
+
+static struct ath79_spi_platform_data rbspi_ath79_spi_data = {
+ .bus_num = 0,
+ .cs_gpios = rbspi_spi_cs_gpios,
+};
+
+/*
+ * Global spi_board_info: devices that don't have an SSR only have the SPI NOR
+ * flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1
+ */
+static struct spi_board_info rbspi_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rbspi_spi_flash_data,
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "74x164",
+ .platform_data = &rbspi_ssr_data,
+ }
+};
+
void __init rbspi_wlan_init(int wmac_offset)
{
char *art_buf;
@@ -209,7 +304,16 @@ static int __init rbspi_platform_setup(void)
*/
static void __init rbspi_peripherals_setup(u32 flags)
{
- ath79_register_m25p80(&rbspi_spi_flash_data);
+ unsigned spi_n;
+
+ if (flags & RBSPI_HAS_SSR)
+ spi_n = ARRAY_SIZE(rbspi_spi_info);
+ else
+ spi_n = 1; /* only one device on bus0 */
+
+ rbspi_ath79_spi_data.num_chipselect = spi_n;
+ rbspi_ath79_spi_data.cs_gpios = rbspi_spi_cs_gpios;
+ ath79_register_spi(&rbspi_ath79_spi_data, rbspi_spi_info, spi_n);
if (flags & RBSPI_HAS_USB)
ath79_register_usb();
@@ -314,5 +418,46 @@ static void __init rbhapl_setup(void)
rbspi_gpio_keys_reset16);
}
+/*
+ * Init the hAP hardware.
+ * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
+ * to LAN on the casing, and port 1 being assigned to "internet" (WAN).
+ * Port 1 is connected to PHY4 (the ports are labelled in reverse physical
+ * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
+ * internal switch for the LAN ports.
+ * The device also has USB, PoE output and an SSR used for LED multiplexing.
+ */
+static void __init rb952_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
+ RBSPI_HAS_SSR;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */
+ rbspi_network_setup(flags, 1, 5);
+
+ gpio_request_one(RB952_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ gpio_request_one(RB952_GPIO_POE_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
+
+ /* hAP has a single reset button as gpio 16 */
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbspi_gpio_keys_reset16),
+ rbspi_gpio_keys_reset16);
+}
+
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 706663c..2df4eda 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -173,6 +173,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
+ ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */
ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */