Moved netconfig (for ixp4xx only) to S15, so that it can access /proc/cpuinfo to determine which type of board it is on. Added ifup commands at the end to bring up the interfaces.

SVN-Revision: 5886

1 files changed, 7 insertions, 17 deletions

diff --git a/target/linux/ixp4xx-2.6/base-files/etc/init.d/netconfig b/target/linux/ixp4xx-2.6/base-files/etc/init.d/netconfig
index 352a2a9..ded5f4b 100755
--- a/target/linux/ixp4xx-2.6/base-files/etc/init.d/netconfig
+++ b/target/linux/ixp4xx-2.6/base-files/etc/init.d/netconfig
@@ -1,7 +1,7 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2006 OpenWrt.org
 
-START=05
+START=15
 
 # hardware
 #  the 'Hardware' string from cpuinfo
@@ -25,18 +25,6 @@ machine(){
 	esac
 }
 
-# Returns the mtd device with the specified name (without leading /dev)
-# $1 = name of mtd device
-get_mtd() {
-	grep "\"$1\"*$" /proc/mtd | cut -d : -f 1
-}
-
-# Returns the mtd block device with the specified name (without leading /dev)
-# $1 = name of mtd device
-get_mtdblock() {
-	echo $(get_mtd "$1") | sed 's/mtd/mtdblock/'
-}
-
 start() {
 	[ -e /etc/config/network ] && exit 0
 
@@ -62,7 +50,6 @@ start() {
 
 	BEGIN {
 		FS="="
-		getline model
 	}
 	
 	{	c[$1] = $2	}
@@ -78,8 +65,8 @@ start() {
 		print ""
 		print "#### LAN configuration"
 		print "config interface lan"
-		print " option ifname   eth0"
-		if ((model == "nslu2") || (model == "nas100d")) {
+		print "	option ifname	\"eth0\""
+		if ((c["model"] == "nslu2") || (c["model"] == "nas100d")) {
 			p("proto", "bootproto")
 			p("ipaddr", "ip_addr")
 			p("netmask", "netmask")
@@ -88,7 +75,10 @@ start() {
 			p("hostname", "disk_server_name")
 		}
 		else {
-			print " option proto    dhcp"
+			print "	option proto	dhcp"
 		}
 	}' > /etc/config/network
+
+	ifup loopback
+	ifup lan
 }