upgrade to 2.6.30-rc8

SVN-Revision: 16307

24 files changed, 69 insertions, 435 deletions

diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile
index 7ee7266..b26ddce 100644
--- a/target/linux/avr32/Makefile
+++ b/target/linux/avr32/Makefile
@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/avr32/patches/000-revert_usart_pin_selection.patch b/target/linux/avr32/patches/000-revert_usart_pin_selection.patch
deleted file mode 100644
index 075743b..0000000
--- a/target/linux/avr32/patches/000-revert_usart_pin_selection.patch
+++ /dev/null
@@ -1,229 +0,0 @@
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl
- 
- void __init setup_board(void)
- {
--	at32_map_usart(1, 0, 0);	/* USART 1: /dev/ttyS0, DB9 */
-+	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */
- 	at32_setup_serial_console(0);
- }
- 
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda
- void __init setup_board(void)
- {
- #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
--	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
- #else
--	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- 	/* USART 2/unused: expansion connector */
--	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
- 
- 	at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda
- void __init setup_board(void)
- {
- #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
--	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
- #else
--	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- 	/* USART 2/unused: expansion connector */
--	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
- 
- 	at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda
- void __init setup_board(void)
- {
- #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
--	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
- #else
--	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- 	/* USART 2/unused: expansion connector */
--	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
- 
- 	at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/favr-32/setup.c
-+++ b/arch/avr32/boards/favr-32/setup.c
-@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw
- 
- void __init setup_board(void)
- {
--	at32_map_usart(3, 0, 0);	/* USART 3 => /dev/ttyS0 */
-+	at32_map_usart(3, 0);	/* USART 3 => /dev/ttyS0 */
- 	at32_setup_serial_console(0);
- }
- 
---- a/arch/avr32/boards/hammerhead/setup.c
-+++ b/arch/avr32/boards/hammerhead/setup.c
-@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl
- 
- void __init setup_board(void)
- {
--	at32_map_usart(1, 0, 0);	/* USART 1: /dev/ttyS0, DB9 */
-+	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */
- 	at32_setup_serial_console(0);
- }
- 
---- a/arch/avr32/boards/merisc/setup.c
-+++ b/arch/avr32/boards/merisc/setup.c
-@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void)
- 
- void __init setup_board(void)
- {
--	at32_map_usart(0, 0, 0);
--	at32_map_usart(1, 1, 0);
--	at32_map_usart(3, 3, 0);
-+	at32_map_usart(0, 0);
-+	at32_map_usart(1, 1);
-+	at32_map_usart(3, 3);
- 	at32_setup_serial_console(1);
- }
- 
-@@ -248,7 +248,7 @@ static int __init merisc_init(void)
- 	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
- 
- 	if (merisc_board_id >= 1)
--		at32_map_usart(2, 2, 0);
-+		at32_map_usart(2, 2);
- 
- 	at32_add_device_usart(0);
- 	at32_add_device_usart(1);
---- a/arch/avr32/boards/mimc200/setup.c
-+++ b/arch/avr32/boards/mimc200/setup.c
-@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl
- 
- void __init setup_board(void)
- {
--	at32_map_usart(0, 0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
--	at32_map_usart(1, 1, 0);	/* USART 1: /dev/ttyS1 (RS232) */
--	at32_map_usart(2, 2, 0);	/* USART 2: /dev/ttyS2 (RS485) */
--	at32_map_usart(3, 3, 0);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
-+	at32_map_usart(0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
-+	at32_map_usart(1, 1);	/* USART 1: /dev/ttyS1 (RS232) */
-+	at32_map_usart(2, 2);	/* USART 2: /dev/ttyS2 (RS485) */
-+	at32_map_usart(3, 3);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
- }
- 
- static struct i2c_gpio_platform_data i2c_gpio_data = {
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso
- DEFINE_DEV_DATA(atmel_usart, 3);
- DEV_CLK(usart, atmel_usart3, pba, 6);
- 
--static inline void configure_usart0_pins(int flags)
-+static inline void configure_usart0_pins(void)
- {
- 	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
--	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 6);
--	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 7);
--	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 10);
- 
- 	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
- 
--static inline void configure_usart1_pins(int flags)
-+static inline void configure_usart1_pins(void)
- {
- 	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
--	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 19);
--	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 20);
--	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 16);
- 
- 	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
- }
- 
--static inline void configure_usart2_pins(int flags)
-+static inline void configure_usart2_pins(void)
- {
- 	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
--	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 30);
--	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 29);
--	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 28);
- 
- 	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
- 
--static inline void configure_usart3_pins(int flags)
-+static inline void configure_usart3_pins(void)
- {
- 	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
--	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 16);
--	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 15);
--	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 19);
- 
- 	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
- 
- static struct platform_device *__initdata at32_usarts[4];
- 
--void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
-+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
- {
- 	struct platform_device *pdev;
- 
- 	switch (hw_id) {
- 	case 0:
- 		pdev = &atmel_usart0_device;
--		configure_usart0_pins(flags);
-+		configure_usart0_pins();
- 		break;
- 	case 1:
- 		pdev = &atmel_usart1_device;
--		configure_usart1_pins(flags);
-+		configure_usart1_pins();
- 		break;
- 	case 2:
- 		pdev = &atmel_usart2_device;
--		configure_usart2_pins(flags);
-+		configure_usart2_pins();
- 		break;
- 	case 3:
- 		pdev = &atmel_usart3_device;
--		configure_usart3_pins(flags);
-+		configure_usart3_pins();
- 		break;
- 	default:
- 		return;
---- a/arch/avr32/mach-at32ap/include/mach/board.h
-+++ b/arch/avr32/mach-at32ap/include/mach/board.h
-@@ -26,17 +26,12 @@ static inline void __deprecated at32_add
- #define ATMEL_MAX_UART	4
- extern struct platform_device *atmel_default_console_device;
- 
--/* Flags for selecting USART extra pins */
--#define	ATMEL_USART_RTS		0x01
--#define	ATMEL_USART_CTS		0x02
--#define	ATMEL_USART_CLK		0x03
--
- struct atmel_uart_data {
- 	short		use_dma_tx;	/* use transmit DMA? */
- 	short		use_dma_rx;	/* use receive DMA? */
- 	void __iomem	*regs;		/* virtual base address, if any */
- };
--void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
-+void at32_map_usart(unsigned int hw_id, unsigned int line);
- struct platform_device *at32_add_device_usart(unsigned int id);
- 
- struct eth_platform_data {
diff --git a/target/linux/avr32/patches/001-fix_usart_clash.patch b/target/linux/avr32/patches/001-fix_usart_clash.patch
new file mode 100644
index 0000000..54657fd
--- /dev/null
+++ b/target/linux/avr32/patches/001-fix_usart_clash.patch
@@ -0,0 +1,22 @@
+Fix clash in ATMEL_USART_ flags
+
+At the moment ATMEL_USART_{RTS,CTS,CLK} have the values
+1, 2 and 3 respectively.  Given these are used in bitmasks,
+trying to turn on the CLK line will in fact turn on the
+RTS and CTS lines as well.
+
+Change the value of ATMEL_USART_CLK to 4.
+
+Signed-off-by: Ben Nizette <bn@niasdigital.com>
+---
+--- a/arch/avr32/mach-at32ap/include/mach/board.h
++++ b/arch/avr32/mach-at32ap/include/mach/board.h
+@@ -29,7 +29,7 @@ extern struct platform_device *atmel_def
+ /* Flags for selecting USART extra pins */
+ #define	ATMEL_USART_RTS		0x01
+ #define	ATMEL_USART_CTS		0x02
+-#define	ATMEL_USART_CLK		0x03
++#define	ATMEL_USART_CLK		0x04
+ 
+ struct atmel_uart_data {
+ 	short		use_dma_tx;	/* use transmit DMA? */
diff --git a/target/linux/cobalt/Makefile b/target/linux/cobalt/Makefile
index f2501d8..b81ea9b 100644
--- a/target/linux/cobalt/Makefile
+++ b/target/linux/cobalt/Makefile
@@ -11,7 +11,7 @@ BOARD:=cobalt
 BOARDNAME:=Cobalt Microservers
 FEATURES:=tgz pci
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/etrax/Makefile b/target/linux/etrax/Makefile
index c608353..b90a45c 100644
--- a/target/linux/etrax/Makefile
+++ b/target/linux/etrax/Makefile
@@ -10,7 +10,7 @@ ARCH:=cris
 BOARD:=etrax
 BOARDNAME:=Foxboard (ETRAX 100LX)
 FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 DEVICE_TYPE=
 
 include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/gemini/Makefile b/target/linux/gemini/Makefile
index ffa7cd1..14a4fae 100644
--- a/target/linux/gemini/Makefile
+++ b/target/linux/gemini/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Cortina Systems CS351x
 FEATURES:=squashfs
 CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/gemini/patches/001-git_sync.patch b/target/linux/gemini/patches/001-git_sync.patch
index d36c5a2..c408b6f 100644
--- a/target/linux/gemini/patches/001-git_sync.patch
+++ b/target/linux/gemini/patches/001-git_sync.patch
@@ -189,8 +189,8 @@
  	.globl	__kuser_helper_start
  __kuser_helper_start:
  
-@@ -821,7 +822,7 @@ __kuser_memory_barrier:				@ 0xffff0fa0
- #endif
+@@ -818,7 +819,7 @@ __kuser_memory_barrier:				@ 0xffff0fa0
+ 	smp_dmb
  	usr_ret	lr
  
 -	.align	5
@@ -198,7 +198,7 @@
  
  /*
   * Reference prototype:
-@@ -953,7 +954,7 @@ kuser_cmpxchg_fixup:
+@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup:
  
  #endif
  
@@ -207,7 +207,7 @@
  
  /*
   * Reference prototype:
-@@ -1035,7 +1036,7 @@ __kuser_helper_end:
+@@ -1032,7 +1033,7 @@ __kuser_helper_end:
   * of which is copied into r0 for the mode specific abort handler.
   */
  	.macro	vector_stub, name, mode, correction=0
@@ -216,7 +216,7 @@
  
  vector_\name:
  	.if \correction
-@@ -1160,7 +1161,7 @@ __stubs_start:
+@@ -1157,7 +1158,7 @@ __stubs_start:
  	.long	__und_invalid			@  e
  	.long	__und_invalid			@  f
  
@@ -225,7 +225,7 @@
  
  /*=============================================================================
   * Undefined FIQs
-@@ -1190,7 +1191,7 @@ vector_addrexcptn:
+@@ -1187,7 +1188,7 @@ vector_addrexcptn:
   * We group all the following data together to optimise
   * for CPUs with separate I & D caches.
   */
@@ -850,7 +850,7 @@
 +#endif /* __MACH_GMAC_H__ */
 --- a/arch/arm/mach-gemini/include/mach/hardware.h
 +++ b/arch/arm/mach-gemini/include/mach/hardware.h
-@@ -72,4 +72,12 @@
+@@ -71,4 +71,12 @@
   */
  #define IO_ADDRESS(x)	((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
  
diff --git a/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch b/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch
deleted file mode 100644
index 7f46c0b..0000000
--- a/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/drivers/net/r8169.c
-+++ b/drivers/net/r8169.c
-@@ -1890,7 +1890,7 @@ static const struct rtl_cfg_info {
- 		.hw_start	= rtl_hw_start_8169,
- 		.region		= 1,
- 		.align		= 0,
--		.intr_event	= SYSErr | LinkChg | RxOverflow |
-+		.intr_event	= LinkChg | RxOverflow |
- 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
- 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
- 		.features	= RTL_FEATURE_GMII
-@@ -1899,7 +1899,7 @@ static const struct rtl_cfg_info {
- 		.hw_start	= rtl_hw_start_8168,
- 		.region		= 2,
- 		.align		= 8,
--		.intr_event	= SYSErr | LinkChg | RxOverflow |
-+		.intr_event	= LinkChg | RxOverflow |
- 				  TxErr | TxOK | RxOK | RxErr,
- 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
- 		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI
-@@ -1908,7 +1908,7 @@ static const struct rtl_cfg_info {
- 		.hw_start	= rtl_hw_start_8101,
- 		.region		= 2,
- 		.align		= 8,
--		.intr_event	= SYSErr | LinkChg | RxOverflow | PCSTimeout |
-+		.intr_event	= LinkChg | RxOverflow | PCSTimeout |
- 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
- 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
- 		.features	= RTL_FEATURE_MSI
-@@ -3582,10 +3582,12 @@ static irqreturn_t rtl8169_interrupt(int
- 		goto out;
- 	}
- 
-+#if 0
- 	if (unlikely(status & SYSErr)) {
- 		rtl8169_pcierr_interrupt(dev);
- 		goto out;
- 	}
-+#endif
- 
- 	if (status & LinkChg)
- 		rtl8169_check_link_status(dev, tp, ioaddr);
diff --git a/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch
index 6cb3fd4..d9d3ce7 100644
--- a/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch
+++ b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch
@@ -1,8 +1,8 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -96,6 +96,10 @@ config ADM6996_PHY
- config MVSWITCH_PHY
- 	tristate "Driver for Marvell 88E6060 switches"
+@@ -100,6 +100,10 @@ config IP175C_PHY
+ 	tristate "Driver for IC+ IP175C/IP178C switches"
+ 	select SWCONFIG
  
 +config AR8216_PHY
 +	tristate "Driver for Atheros AR8216 switches"
@@ -13,9 +13,9 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
- obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
  obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
 +obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
diff --git a/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch b/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch
index 6173054..01fa431 100644
--- a/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch
+++ b/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch
@@ -17,7 +17,7 @@
  		port->bulk_in_size = buffer_size;
  		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
  		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-@@ -1311,3 +1312,5 @@ MODULE_LICENSE("GPL");
+@@ -1312,3 +1313,5 @@ MODULE_LICENSE("GPL");
  
  module_param(debug, bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch b/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch
index c9a2774..eb6bd8c 100644
--- a/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch
+++ b/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch
@@ -1,6 +1,6 @@
 --- a/init/main.c
 +++ b/init/main.c
-@@ -812,7 +812,7 @@ static noinline int init_post(void)
+@@ -811,7 +811,7 @@ static noinline int init_post(void)
  	numa_default_policy();
  
  	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
diff --git a/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch b/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch
index 467187c..ad35996 100644
--- a/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch
+++ b/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch
@@ -824,7 +824,7 @@
 +be done automatically.
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -2495,6 +2495,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+@@ -2504,6 +2504,11 @@ T:	git git://git.kernel.org/pub/scm/linu
  S:	Maintained
  F:	drivers/media/video/gspca/
  
diff --git a/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch b/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch
deleted file mode 100644
index 1a8012f..0000000
--- a/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From: Nicolas Pitre <nico@cam.org>
-Date: Fri, 22 May 2009 20:53:40 +0000 (-0400)
-Subject: [ARM] add coherent DMA mask for mv643xx_eth
-X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=a49a018a6ea6d73742a81d673fe5ec4a7d2137b3
-
-[ARM] add coherent DMA mask for mv643xx_eth
-
-Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because
-the platform device declaration does not include any coherent DMA mask
-and coherent memory allocations fail.
-
-Signed-off-by: Nicolas Pitre <nico@marvell.com>
----
-
---- a/arch/arm/mach-kirkwood/common.c
-+++ b/arch/arm/mach-kirkwood/common.c
-@@ -144,6 +144,9 @@ static struct platform_device kirkwood_g
- 	.id		= 0,
- 	.num_resources	= 1,
- 	.resource	= kirkwood_ge00_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -202,6 +205,9 @@ static struct platform_device kirkwood_g
- 	.id		= 1,
- 	.num_resources	= 1,
- 	.resource	= kirkwood_ge01_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-loki/common.c
-+++ b/arch/arm/mach-loki/common.c
-@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 =
- 	.id		= 0,
- 	.num_resources	= 1,
- 	.resource	= loki_ge0_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 =
- 	.id		= 1,
- 	.num_resources	= 1,
- 	.resource	= loki_ge1_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-mv78xx0/common.c
-+++ b/arch/arm/mach-mv78xx0/common.c
-@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge
- 	.id		= 0,
- 	.num_resources	= 1,
- 	.resource	= mv78xx0_ge00_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge
- 	.id		= 1,
- 	.num_resources	= 1,
- 	.resource	= mv78xx0_ge01_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge
- 	.id		= 2,
- 	.num_resources	= 1,
- 	.resource	= mv78xx0_ge10_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge
- 	.id		= 3,
- 	.num_resources	= 1,
- 	.resource	= mv78xx0_ge11_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-orion5x/common.c
-+++ b/arch/arm/mach-orion5x/common.c
-@@ -188,6 +188,9 @@ static struct platform_device orion5x_et
- 	.id		= 0,
- 	.num_resources	= 1,
- 	.resource	= orion5x_eth_resources,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
- };
- 
- void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
diff --git a/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch b/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch
index 0a52a87..631da6d 100644
--- a/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch
+++ b/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch
@@ -1,6 +1,6 @@
 --- a/init/main.c
 +++ b/init/main.c
-@@ -836,10 +836,7 @@ static noinline int init_post(void)
+@@ -835,10 +835,7 @@ static noinline int init_post(void)
  		printk(KERN_WARNING "Failed to execute %s.  Attempting "
  					"defaults...\n", execute_command);
  	}
diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile
index c5004f7..1e91b6f 100644
--- a/target/linux/kirkwood/Makefile
+++ b/target/linux/kirkwood/Makefile
@@ -11,7 +11,7 @@ BOARD:=kirkwood
 BOARDNAME:=Marvell Kirkwood
 FEATURES:=tgz usb
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/kirkwood/patches/003-gating.patch b/target/linux/kirkwood/patches/003-gating.patch
index af8e911..c858d01 100644
--- a/target/linux/kirkwood/patches/003-gating.patch
+++ b/target/linux/kirkwood/patches/003-gating.patch
@@ -16,7 +16,7 @@ Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
 
 --- a/arch/arm/mach-kirkwood/common.c
 +++ b/arch/arm/mach-kirkwood/common.c
-@@ -788,6 +788,38 @@ static void __init kirkwood_l2_init(void
+@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void
  #endif
  }
  
diff --git a/target/linux/octeon/Makefile b/target/linux/octeon/Makefile
index 3cf8148..4f344a3 100644
--- a/target/linux/octeon/Makefile
+++ b/target/linux/octeon/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Octeon
 FEATURES:=squashfs jffs2 pci
 CFLAGS:=-Os -pipe -funit-at-a-time
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/octeon/patches/001-handle_removal_h_constraint.patch b/target/linux/octeon/patches/001-handle_removal_h_constraint.patch
index b37b4a7..48c41d7 100644
--- a/target/linux/octeon/patches/001-handle_removal_h_constraint.patch
+++ b/target/linux/octeon/patches/001-handle_removal_h_constraint.patch
@@ -12,8 +12,8 @@ Signed-off-by: David Daney <ddaney@caviumnetworks.com>
 
 --- a/arch/mips/include/asm/compiler.h
 +++ b/arch/mips/include/asm/compiler.h
-@@ -16,4 +16,11 @@
- #define GCC_REG_ACCUM "accum"
+@@ -26,4 +26,11 @@ typedef u64 uintx_t;
+ #endif
  #endif
  
 +#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4)
@@ -26,7 +26,7 @@ Signed-off-by: David Daney <ddaney@caviumnetworks.com>
  #endif /* _ASM_COMPILER_H */
 --- a/arch/mips/include/asm/delay.h
 +++ b/arch/mips/include/asm/delay.h
-@@ -83,10 +83,14 @@ static inline void __udelay(unsigned lon
+@@ -67,10 +67,14 @@ static inline unsigned long __usecs_to_l
  		: "r" (usecs), "r" (lpj)
  		: GCC_REG_ACCUM);
  	else if (sizeof(long) == 8 && !R4000_WAR)
diff --git a/target/linux/rb532/Makefile b/target/linux/rb532/Makefile
index 8f036cc..f04a4e6 100644
--- a/target/linux/rb532/Makefile
+++ b/target/linux/rb532/Makefile
@@ -11,7 +11,7 @@ BOARD:=rb532
 BOARDNAME:=Mikrotik RouterBoard 532
 FEATURES:=jffs2 pci tgz
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += hostapd-mini kmod-madwifi
diff --git a/target/linux/s3c24xx/Makefile b/target/linux/s3c24xx/Makefile
index b2a29e7..477fd9b 100644
--- a/target/linux/s3c24xx/Makefile
+++ b/target/linux/s3c24xx/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Samsung S3C24xx
 FEATURES:=jffs2
 CFLAGS:=-O2 -pipe -march=armv4t -mtune=arm920t -funit-at-a-time
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 DEVICE_TYPE=phone
 
diff --git a/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch b/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch
index 3aa1a0b..305af18 100644
--- a/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch
+++ b/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch
@@ -1,7 +1,6 @@
-diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/video/console/fbcon.c
---- linux-2.6.29.orig/drivers/video/console/fbcon.c	2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/console/fbcon.c	2009-05-15 01:45:36.000000000 +0200
-@@ -562,7 +562,7 @@
+--- a/drivers/video/console/fbcon.c
++++ b/drivers/video/console/fbcon.c
+@@ -562,7 +562,7 @@ static void fbcon_prepare_logo(struct vc
  	/* Need to make room for the logo */
  	struct fbcon_ops *ops = info->fbcon_par;
  	int cnt, erase = vc->vc_video_erase_char, step;
@@ -10,7 +9,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v
  	int logo_height;
  
  	if (info->flags & FBINFO_MODULE) {
-@@ -581,37 +581,18 @@
+@@ -581,37 +581,18 @@ static void fbcon_prepare_logo(struct vc
  	q = (unsigned short *) (vc->vc_origin +
  				vc->vc_size_row * rows);
  	step = logo_lines * cols;
@@ -60,7 +59,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v
  	scr_memsetw((unsigned short *) vc->vc_origin,
  		    erase,
  		    vc->vc_size_row * logo_lines);
-@@ -621,16 +602,6 @@
+@@ -621,16 +602,6 @@ static void fbcon_prepare_logo(struct vc
  		update_screen(vc);
  	}
  
diff --git a/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch b/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch
index 87f62fd..3e1a59c 100644
--- a/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch
+++ b/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch
@@ -1,7 +1,6 @@
-diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/video/logo/Kconfig
---- linux-2.6.29.orig/drivers/video/logo/Kconfig	2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/Kconfig	2009-05-14 22:28:50.000000000 +0200
-@@ -82,4 +82,8 @@
+--- a/drivers/video/logo/Kconfig
++++ b/drivers/video/logo/Kconfig
+@@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224
  	depends on M32R
  	default y
  
@@ -10,10 +9,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/vide
 +	default y
 +
  endif # LOGO
-diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video/logo/logo.c
---- linux-2.6.29.orig/drivers/video/logo/logo.c	2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/logo.c	2009-05-14 22:37:05.000000000 +0200
-@@ -35,6 +35,7 @@
+--- a/drivers/video/logo/logo.c
++++ b/drivers/video/logo/logo.c
+@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe
  extern const struct linux_logo logo_superh_vga16;
  extern const struct linux_logo logo_superh_clut224;
  extern const struct linux_logo logo_m32r_clut224;
@@ -21,7 +19,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video
  
  static int nologo;
  module_param(nologo, bool, 0);
-@@ -115,6 +116,10 @@
+@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f
  		/* M32R Linux logo */
  		logo = &logo_m32r_clut224;
  #endif
@@ -32,9 +30,8 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video
  	}
  	return logo;
  }
-diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm
---- linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm	2009-05-15 09:54:13.000000000 +0200
+--- /dev/null
++++ b/drivers/video/logo/logo_openwrt_clut224.ppm
 @@ -0,0 +1,38403 @@
 +P3
 +480 480
@@ -38439,10 +38436,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.
 +0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
 +0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
 +0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-diff -ruN linux-2.6.29.orig/drivers/video/logo/Makefile linux-2.6.29/drivers/video/logo/Makefile
---- linux-2.6.29.orig/drivers/video/logo/Makefile	2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/Makefile	2009-05-14 22:35:42.000000000 +0200
-@@ -15,6 +15,7 @@
+--- a/drivers/video/logo/Makefile
++++ b/drivers/video/logo/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO)		+= logo_
  obj-$(CONFIG_LOGO_SUPERH_VGA16)		+= logo_superh_vga16.o
  obj-$(CONFIG_LOGO_SUPERH_CLUT224)	+= logo_superh_clut224.o
  obj-$(CONFIG_LOGO_M32R_CLUT224)		+= logo_m32r_clut224.o
diff --git a/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch b/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch
index 3e6fdbe..4176dbc 100644
--- a/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch
+++ b/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch
@@ -1,6 +1,6 @@
 --- a/drivers/serial/samsung.c
 +++ b/drivers/serial/samsung.c
-@@ -882,7 +882,7 @@ static struct uart_ops s3c24xx_serial_op
+@@ -878,7 +878,7 @@ static struct uart_ops s3c24xx_serial_op
  
  static struct uart_driver s3c24xx_uart_drv = {
  	.owner		= THIS_MODULE,
diff --git a/target/linux/sibyte/Makefile b/target/linux/sibyte/Makefile
index f156c4d..65e83ec 100644
--- a/target/linux/sibyte/Makefile
+++ b/target/linux/sibyte/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Broadcom/SiByte SB-1
 FEATURES:=fpu
 CFLAGS:=-Os -pipe -march=sb1 -funit-at-a-time
 
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
 
 include $(INCLUDE_DIR)/target.mk