cns3xxx: switch to using the upstream dwc2 driver instead of dwc_otg

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43398

26 files changed, 51 insertions, 22978 deletions

diff --git a/target/linux/cns3xxx/config-3.14 b/target/linux/cns3xxx/config-3.14
index be7b13e..df132b4 100644
--- a/target/linux/cns3xxx/config-3.14
+++ b/target/linux/cns3xxx/config-3.14
@@ -65,10 +65,6 @@ CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_USER is not set
 CONFIG_DMA_CACHE_FIQ_BROADCAST=y
 CONFIG_DTC=y
-# CONFIG_DWC_DEBUG is not set
-# CONFIG_DWC_DEVICE_ONLY is not set
-# CONFIG_DWC_HOST_ONLY is not set
-CONFIG_DWC_OTG_MODE=y
 CONFIG_EEPROM_AT24=y
 CONFIG_FIQ=y
 CONFIG_FRAME_POINTER=y
@@ -246,7 +242,9 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_CNS3XXX_EHCI=y
 CONFIG_USB_CNS3XXX_OHCI=y
 CONFIG_USB_COMMON=y
-CONFIG_USB_DWC_OTG=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_PCI=y
diff --git a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
index d269ffd..8ab5209 100644
--- a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
+++ b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
@@ -537,7 +537,7 @@ static struct resource cns3xxx_usb_otg_resources[] = {
 static u64 cns3xxx_usb_otg_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device cns3xxx_usb_otg_device = {
-	.name          = "dwc_otg",
+	.name          = "dwc2",
 	.num_resources = ARRAY_SIZE(cns3xxx_usb_otg_resources),
 	.resource      = cns3xxx_usb_otg_resources,
 	.dev           = {
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/Kconfig b/target/linux/cns3xxx/files/drivers/usb/dwc/Kconfig
deleted file mode 100644
index be1b7f6..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/Kconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# USB Dual Role (OTG-ready) Controller Drivers
-# for silicon based on Synopsys DesignWare IP
-#
-
-comment "Enable Host or Gadget support for DesignWare OTG controller"
-depends on !USB && USB_GADGET=n
-
-config USB_DWC_OTG
-	tristate "Synopsys DWC OTG Controller"
-	depends on USB
-	help
-	   This driver provides USB Device Controller support for the
-	   Synopsys DesignWare USB OTG Core used on the Cavium CNS34xx SOC.
-
-config DWC_DEBUG
-	bool "Enable DWC Debugging"
-	depends on USB_DWC_OTG
-	default n
-	help
-	   Enable DWC driver debugging
-
-choice
-	prompt "DWC Mode Selection"
-	depends on USB_DWC_OTG
-	default DWC_HOST_ONLY
-	help
-	   Select the DWC Core in OTG, Host only, or Device only mode.
-
-config DWC_HOST_ONLY
-	bool "DWC Host Only Mode"
-
-config DWC_OTG_MODE
-	bool "DWC OTG Mode"
-	select USB_GADGET
-	select USB_GADGET_SELECTED
-
-config DWC_DEVICE_ONLY
-	bool "DWC Device Only Mode"
-	select USB_GADGET
-	select USB_GADGET_SELECTED
-
-endchoice
-
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/Makefile b/target/linux/cns3xxx/files/drivers/usb/dwc/Makefile
deleted file mode 100644
index 58f3db7..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for DWC_otg Highspeed USB controller driver
-#
-
-EXTRA_CFLAGS	+= -DDWC_HS_ELECT_TST
-#EXTRA_CFLAGS	+= -Dlinux -DDWC_HS_ELECT_TST
-#EXTRA_CFLAGS	+= -DDWC_EN_ISOC
-
-ifneq ($(CONFIG_DWC_HOST_ONLY),)
-EXTRA_CFLAGS    += -DDWC_HOST_ONLY
-endif
-
-ifneq ($(CONFIG_DWC_DEVICE_ONLY),)
-EXTRA_CFLAGS    += -DDWC_DEVICE_ONLY
-endif
-
-ifneq ($(CONFIG_DWC_DEBUG),)
-EXTRA_CFLAGS	+= -DDEBUG
-endif
-
-obj-$(CONFIG_USB_DWC_OTG)	:= dwc_otg.o
-
-dwc_otg-objs	:= otg_driver.o otg_attr.o
-dwc_otg-objs	+= otg_cil.o otg_cil_intr.o
-dwc_otg-objs	+= otg_pcd.o otg_pcd_intr.o
-dwc_otg-objs	+= otg_hcd.o otg_hcd_intr.o otg_hcd_queue.o
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.c
deleted file mode 100644
index 3fb67b9..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
- * $Revision: #31 $
- * $Date: 2008/07/15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing.  The Linux driver attributes
- * feature will be used to provide the Linux Diagnostic
- * Interface. These attributes are accessed through sysfs.
- */
-
-/** @page "Linux Module Attributes"
- *
- * The Linux module attributes feature is used to provide the Linux
- * Diagnostic Interface.  These attributes are accessed through sysfs.
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing.
-
-
- The following table shows the attributes.
- <table>
- <tr>
- <td><b> Name</b></td>
- <td><b> Description</b></td>
- <td><b> Access</b></td>
- </tr>
-
- <tr>
- <td> mode </td>
- <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hnpcapable </td>
- <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srpcapable </td>
- <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> hnp </td>
- <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srp </td>
- <td> Initiates the Session Request Protocol.  Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> buspower </td>
- <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> bussuspend </td>
- <td> Suspends the USB bus.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> busconnected </td>
- <td> Gets the connection status of the bus</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> gotgctl </td>
- <td> Gets or sets the Core Control Status Register.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gusbcfg </td>
- <td> Gets or sets the Core USB Configuration Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> grxfsiz </td>
- <td> Gets or sets the Receive FIFO Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gnptxfsiz </td>
- <td> Gets or sets the non-periodic Transmit Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gpvndctl </td>
- <td> Gets or sets the PHY Vendor Control Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> ggpio </td>
- <td> Gets the value in the lower 16-bits of the General Purpose IO Register
- or sets the upper 16 bits.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> guid </td>
- <td> Gets or sets the value of the User ID Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gsnpsid </td>
- <td> Gets the value of the Synopsys ID Regester</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> devspeed </td>
- <td> Gets or sets the device speed setting in the DCFG register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> enumspeed </td>
- <td> Gets the device enumeration Speed.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hptxfsiz </td>
- <td> Gets the value of the Host Periodic Transmit FIFO</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hprt0 </td>
- <td> Gets or sets the value in the Host Port Control and Status Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regoffset </td>
- <td> Sets the register offset for the next Register Access</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regvalue </td>
- <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> remote_wakeup </td>
- <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
- wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
- Wakeup signalling bit in the Device Control Register is set for 1
- milli-second.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regdump </td>
- <td> Dumps the contents of core registers.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> spramdump </td>
- <td> Dumps the contents of core registers.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcddump </td>
- <td> Dumps the current HCD state.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcd_frrem </td>
- <td> Shows the average value of the Frame Remaining
- field in the Host Frame Number/Frame Remaining register when an SOF interrupt
- occurs. This can be used to determine the average interrupt latency. Also
- shows the average Frame Remaining value for start_transfer and the "a" and
- "b" sample points. The "a" and "b" sample points may be used during debugging
- bto determine how long it takes to execute a section of the HCD code.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> rd_reg_test </td>
- <td> Displays the time required to read the GNPTXFSIZ register many times
- (the output shows the number of times the register is read).
- <td> Read</td>
- </tr>
-
- <tr>
- <td> wr_reg_test </td>
- <td> Displays the time required to write the GNPTXFSIZ register many times
- (the output shows the number of times the register is written).
- <td> Read</td>
- </tr>
-
- </table>
-
- Example usage:
- To get the current mode:
- cat /sys/devices/lm0/mode
-
- To power down the USB:
- echo 0 > /sys/devices/lm0/buspower
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h>  /* permission constants */
-#include <linux/version.h>
-
-#include <asm/sizes.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-#include "otg_plat.h"
-#include "otg_attr.h"
-#include "otg_driver.h"
-#include "otg_pcd.h"
-#include "otg_hcd.h"
-
-/*
- * MACROs for defining sysfs attribute
- */
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t val; \
-	val = dwc_read_reg32 (_addr_); \
-	val = (val & (_mask_)) >> _shift_; \
-	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-					const char *buf, size_t count) \
-{ \
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t set = simple_strtoul(buf, NULL, 16); \
-	uint32_t clear = set; \
-	clear = ((~clear) << _shift_) & _mask_; \
-	set = (set << _shift_) & _mask_; \
-	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-	dwc_modify_reg32(_addr_, clear, set); \
-	return count; \
-}
-
-/*
- * MACROs for defining sysfs attribute for 32-bit registers
- */
-#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t val; \
-	val = dwc_read_reg32 (_addr_); \
-	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-					const char *buf, size_t count) \
-{ \
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t val = simple_strtoul(buf, NULL, 16); \
-	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-	dwc_write_reg32(_addr_, val); \
-	return count; \
-}
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-
-/** @name Functions for Show/Store of Attributes */
-/**@{*/
-
-/**
- * Show the register offset of the Register Access.
- */
-static ssize_t regoffset_show( struct device *_dev,
-			       struct device_attribute *attr,
-			       char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-}
-
-/**
- * Set the register offset for the next Register Access 	Read/Write
- */
-static ssize_t regoffset_store( struct device *_dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t count )
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t offset = simple_strtoul(buf, NULL, 16);
-	//dev_dbg(_dev, "Offset=0x%08x\n", offset);
-	if (offset < SZ_256K ) {
-		otg_dev->reg_offset = offset;
-	}
-	else {
-		dev_err( _dev, "invalid offset\n" );
-	}
-
-	return count;
-}
-DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
-
-
-/**
- * Show the value of the register at the offset in the reg_offset
- * attribute.
- */
-static ssize_t regvalue_show( struct device *_dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t val;
-	volatile uint32_t *addr;
-
-	if (otg_dev->reg_offset != 0xFFFFFFFF &&
-	    0 != otg_dev->base) {
-		/* Calculate the address */
-		addr = (uint32_t*)(otg_dev->reg_offset +
-				   (uint8_t*)otg_dev->base);
-		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-		val = dwc_read_reg32( addr );
-		return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
-				"Reg@0x%06x = 0x%08x\n",
-				otg_dev->reg_offset, val);
-	}
-	else {
-		dev_err(_dev, "Invalid offset (0x%0x)\n",
-			otg_dev->reg_offset);
-		return sprintf(buf, "invalid offset\n" );
-	}
-}
-
-/**
- * Store the value in the register at the offset in the reg_offset
- * attribute.
- *
- */
-static ssize_t regvalue_store( struct device *_dev,
-			       struct device_attribute *attr,
-			       const char *buf,
-			       size_t count )
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	volatile uint32_t * addr;
-	uint32_t val = simple_strtoul(buf, NULL, 16);
-	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
-	if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
-		/* Calculate the address */
-		addr = (uint32_t*)(otg_dev->reg_offset +
-				   (uint8_t*)otg_dev->base);
-		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-		dwc_write_reg32( addr, val );
-	}
-	else {
-		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
-			otg_dev->reg_offset);
-	}
-	return count;
-}
-DEVICE_ATTR(regvalue,  S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-
-/*
- * Attributes
- */
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-
-DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-
-DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-
-
-/**
- * @todo Add code to initiate the HNP.
- */
-/**
- * Show the HNP status bit
- */
-static ssize_t hnp_show( struct device *_dev,
-			 struct device_attribute *attr,
-			 char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	gotgctl_data_t val;
-	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-	return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-}
-
-/**
- * Set the HNP Request bit
- */
-static ssize_t hnp_store( struct device *_dev,
-			  struct device_attribute *attr,
-			  const char *buf,
-			  size_t count )
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t in = simple_strtoul(buf, NULL, 16);
-	uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
-	gotgctl_data_t mem;
-	mem.d32 = dwc_read_reg32(addr);
-	mem.b.hnpreq = in;
-	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-	dwc_write_reg32(addr, mem.d32);
-	return count;
-}
-DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-
-/**
- * @todo Add code to initiate the SRP.
- */
-/**
- * Show the SRP status bit
- */
-static ssize_t srp_show( struct device *_dev,
-			 struct device_attribute *attr,
-			 char *buf)
-{
-#ifndef DWC_HOST_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	gotgctl_data_t val;
-	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-	return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-#else
-	return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-
-
-
-/**
- * Set the SRP Request bit
- */
-static ssize_t srp_store( struct device *_dev,
-			  struct device_attribute *attr,
-			  const char *buf,
-			  size_t count )
-{
-#ifndef DWC_HOST_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-#endif
-	return count;
-}
-DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-
-/**
- * @todo Need to do more for power on/off?
- */
-/**
- * Show the Bus Power status
- */
-static ssize_t buspower_show( struct device *_dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	hprt0_data_t val;
-	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-	return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-}
-
-
-/**
- * Set the Bus Power status
- */
-static ssize_t buspower_store( struct device *_dev,
-			       struct device_attribute *attr,
-			       const char *buf,
-			       size_t count )
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t on = simple_strtoul(buf, NULL, 16);
-	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-	hprt0_data_t mem;
-
-	mem.d32 = dwc_read_reg32(addr);
-	mem.b.prtpwr = on;
-
-	//dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-	dwc_write_reg32(addr, mem.d32);
-
-	return count;
-}
-DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-
-/**
- * @todo Need to do more for suspend?
- */
-/**
- * Show the Bus Suspend status
- */
-static ssize_t bussuspend_show( struct device *_dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	hprt0_data_t val;
-	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-	return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-}
-
-/**
- * Set the Bus Suspend status
- */
-static ssize_t bussuspend_store( struct device *_dev,
-				 struct device_attribute *attr,
-				 const char *buf,
-				 size_t count )
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t in = simple_strtoul(buf, NULL, 16);
-	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-	hprt0_data_t mem;
-	mem.d32 = dwc_read_reg32(addr);
-	mem.b.prtsusp = in;
-	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-	dwc_write_reg32(addr, mem.d32);
-	return count;
-}
-DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-
-/**
- * Show the status of Remote Wakeup.
- */
-static ssize_t remote_wakeup_show( struct device *_dev,
-				   struct device_attribute *attr,
-				   char *buf)
-{
-#ifndef DWC_HOST_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	dctl_data_t val;
-	val.d32 =
-		dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
-	return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
-			val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-#else
-	return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-/**
- * Initiate a remote wakeup of the host.  The Device control register
- * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
- * flag is set.
- *
- */
-static ssize_t remote_wakeup_store( struct device *_dev,
-				    struct device_attribute *attr,
-				    const char *buf,
-				    size_t count )
-{
-#ifndef DWC_HOST_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t val = simple_strtoul(buf, NULL, 16);
-	if (val&1) {
-		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
-	}
-	else {
-		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
-	}
-#endif
-	return count;
-}
-DEVICE_ATTR(remote_wakeup,  S_IRUGO|S_IWUSR, remote_wakeup_show,
-	    remote_wakeup_store);
-
-/**
- * Dump global registers and either host or device registers (depending on the
- * current mode of the core).
- */
-static ssize_t regdump_show( struct device *_dev,
-			     struct device_attribute *attr,
-			     char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-        dwc_otg_dump_global_registers( otg_dev->core_if);
-        if (dwc_otg_is_host_mode(otg_dev->core_if)) {
-                dwc_otg_dump_host_registers( otg_dev->core_if);
-        } else {
-                dwc_otg_dump_dev_registers( otg_dev->core_if);
-
-        }
-   	return sprintf( buf, "Register Dump\n" );
-}
-
-DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0);
-
-/**
- * Dump global registers and either host or device registers (depending on the
- * current mode of the core).
- */
-static ssize_t spramdump_show( struct device *_dev,
-			       struct device_attribute *attr,
-			       char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-        dwc_otg_dump_spram( otg_dev->core_if);
-
-        return sprintf( buf, "SPRAM Dump\n" );
-}
-
-DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0);
-
-/**
- * Dump the current hcd state.
- */
-static ssize_t hcddump_show( struct device *_dev,
-			     struct device_attribute *attr,
-			     char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev);
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	dwc_otg_hcd_t *otg_dev = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_hcd_dump_state(otg_dev);
-#endif
-   	return sprintf( buf, "HCD Dump\n" );
-}
-
-DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0);
-
-/**
- * Dump the average frame remaining at SOF. This can be used to
- * determine average interrupt latency. Frame remaining is also shown for
- * start transfer and two additional sample points.
- */
-static ssize_t hcd_frrem_show( struct device *_dev,
-			       struct device_attribute *attr,
-			       char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-#endif
-   	return sprintf( buf, "HCD Dump Frame Remaining\n" );
-}
-
-DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0);
-
-/**
- * Displays the time required to read the GNPTXFSIZ register many times (the
- * output shows the number of times the register is read).
- */
-#define RW_REG_COUNT 10000000
-#define MSEC_PER_JIFFIE 1000/HZ
-static ssize_t rd_reg_test_show( struct device *_dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	int i;
-	int time;
-	int start_jiffies;
-
-	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-	start_jiffies = jiffies;
-	for (i = 0; i < RW_REG_COUNT; i++) {
-		dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-	}
-	time = jiffies - start_jiffies;
-   	return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-}
-
-DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0);
-
-/**
- * Displays the time required to write the GNPTXFSIZ register many times (the
- * output shows the number of times the register is written).
- */
-static ssize_t wr_reg_test_show( struct device *_dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
-	uint32_t reg_val;
-	int i;
-	int time;
-	int start_jiffies;
-
-	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-	reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-	start_jiffies = jiffies;
-	for (i = 0; i < RW_REG_COUNT; i++) {
-		dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
-	}
-	time = jiffies - start_jiffies;
-   	return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-}
-
-DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0);
-/**@}*/
-
-/**
- * Create the device files
- */
-void dwc_otg_attr_create (struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int error;
-
-	error = device_create_file(dev, &dev_attr_regoffset);
-	error = device_create_file(dev, &dev_attr_regvalue);
-	error = device_create_file(dev, &dev_attr_mode);
-	error = device_create_file(dev, &dev_attr_hnpcapable);
-	error = device_create_file(dev, &dev_attr_srpcapable);
-	error = device_create_file(dev, &dev_attr_hnp);
-	error = device_create_file(dev, &dev_attr_srp);
-	error = device_create_file(dev, &dev_attr_buspower);
-	error = device_create_file(dev, &dev_attr_bussuspend);
-	error = device_create_file(dev, &dev_attr_busconnected);
-	error = device_create_file(dev, &dev_attr_gotgctl);
-	error = device_create_file(dev, &dev_attr_gusbcfg);
-	error = device_create_file(dev, &dev_attr_grxfsiz);
-	error = device_create_file(dev, &dev_attr_gnptxfsiz);
-	error = device_create_file(dev, &dev_attr_gpvndctl);
-	error = device_create_file(dev, &dev_attr_ggpio);
-	error = device_create_file(dev, &dev_attr_guid);
-	error = device_create_file(dev, &dev_attr_gsnpsid);
-	error = device_create_file(dev, &dev_attr_devspeed);
-	error = device_create_file(dev, &dev_attr_enumspeed);
-	error = device_create_file(dev, &dev_attr_hptxfsiz);
-	error = device_create_file(dev, &dev_attr_hprt0);
-	error = device_create_file(dev, &dev_attr_remote_wakeup);
-	error = device_create_file(dev, &dev_attr_regdump);
-	error = device_create_file(dev, &dev_attr_spramdump);
-	error = device_create_file(dev, &dev_attr_hcddump);
-	error = device_create_file(dev, &dev_attr_hcd_frrem);
-	error = device_create_file(dev, &dev_attr_rd_reg_test);
-	error = device_create_file(dev, &dev_attr_wr_reg_test);
-}
-
-/**
- * Remove the device files
- */
-void dwc_otg_attr_remove (struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	device_remove_file(dev, &dev_attr_regoffset);
-	device_remove_file(dev, &dev_attr_regvalue);
-	device_remove_file(dev, &dev_attr_mode);
-	device_remove_file(dev, &dev_attr_hnpcapable);
-	device_remove_file(dev, &dev_attr_srpcapable);
-	device_remove_file(dev, &dev_attr_hnp);
-	device_remove_file(dev, &dev_attr_srp);
-	device_remove_file(dev, &dev_attr_buspower);
-	device_remove_file(dev, &dev_attr_bussuspend);
-	device_remove_file(dev, &dev_attr_busconnected);
-	device_remove_file(dev, &dev_attr_gotgctl);
-	device_remove_file(dev, &dev_attr_gusbcfg);
-	device_remove_file(dev, &dev_attr_grxfsiz);
-	device_remove_file(dev, &dev_attr_gnptxfsiz);
-	device_remove_file(dev, &dev_attr_gpvndctl);
-	device_remove_file(dev, &dev_attr_ggpio);
-	device_remove_file(dev, &dev_attr_guid);
-	device_remove_file(dev, &dev_attr_gsnpsid);
-	device_remove_file(dev, &dev_attr_devspeed);
-	device_remove_file(dev, &dev_attr_enumspeed);
-	device_remove_file(dev, &dev_attr_hptxfsiz);
-	device_remove_file(dev, &dev_attr_hprt0);
-	device_remove_file(dev, &dev_attr_remote_wakeup);
-	device_remove_file(dev, &dev_attr_regdump);
-	device_remove_file(dev, &dev_attr_spramdump);
-	device_remove_file(dev, &dev_attr_hcddump);
-	device_remove_file(dev, &dev_attr_hcd_frrem);
-	device_remove_file(dev, &dev_attr_rd_reg_test);
-	device_remove_file(dev, &dev_attr_wr_reg_test);
-}
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.h
deleted file mode 100644
index b970dc0..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_attr.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
- * $Revision: #7 $
- * $Date: 2005/03/28 $
- * $Change: 477051 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_ATTR_H__)
-#define __DWC_OTG_ATTR_H__
-
-/** @file
- * This file contains the interface to the Linux device attributes.
- */
-extern struct device_attribute dev_attr_regoffset;
-extern struct device_attribute dev_attr_regvalue;
-
-extern struct device_attribute dev_attr_mode;
-extern struct device_attribute dev_attr_hnpcapable;
-extern struct device_attribute dev_attr_srpcapable;
-extern struct device_attribute dev_attr_hnp;
-extern struct device_attribute dev_attr_srp;
-extern struct device_attribute dev_attr_buspower;
-extern struct device_attribute dev_attr_bussuspend;
-extern struct device_attribute dev_attr_busconnected;
-extern struct device_attribute dev_attr_gotgctl;
-extern struct device_attribute dev_attr_gusbcfg;
-extern struct device_attribute dev_attr_grxfsiz;
-extern struct device_attribute dev_attr_gnptxfsiz;
-extern struct device_attribute dev_attr_gpvndctl;
-extern struct device_attribute dev_attr_ggpio;
-extern struct device_attribute dev_attr_guid;
-extern struct device_attribute dev_attr_gsnpsid;
-extern struct device_attribute dev_attr_devspeed;
-extern struct device_attribute dev_attr_enumspeed;
-extern struct device_attribute dev_attr_hptxfsiz;
-extern struct device_attribute dev_attr_hprt0;
-
-void dwc_otg_attr_create (struct platform_device *pdev);
-void dwc_otg_attr_remove (struct platform_device *pdev);
-
-#endif
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.c
deleted file mode 100644
index 668d4d2..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.c
+++ /dev/null
@@ -1,3854 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
- * $Revision: #147 $
- * $Date: 2008/10/16 $
- * $Change: 1117667 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * The CIL manages the memory map for the core so that the HCD and PCD
- * don't have to do this separately. It also handles basic tasks like
- * reading/writing the registers and data FIFOs in the controller.
- * Some of the data access functions provide encapsulation of several
- * operations required to perform a task, such as writing multiple
- * registers to start a transfer. Finally, the CIL performs basic
- * services that are not specific to either the host or device modes
- * of operation. These services include management of the OTG Host
- * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
- * Diagnostic API is also provided to allow testing of the controller
- * hardware.
- *
- * The Core Interface Layer has the following requirements:
- * - Provides basic controller operations.
- * - Minimal use of OS services.
- * - The OS services used will be abstracted by using inline functions
- *	 or macros.
- *
- */
-#include <asm/unaligned.h>
-#include <linux/dma-mapping.h>
-#ifdef DEBUG
-#include <linux/jiffies.h>
-#endif
-
-#include "otg_plat.h"
-#include "otg_regs.h"
-#include "otg_cil.h"
-#include "otg_pcd.h"
-#include "otg_hcd.h"
-
-/**
- * This function is called to initialize the DWC_otg CSR data
- * structures.	The register addresses in the device and host
- * structures are initialized from the base address supplied by the
- * caller.	The calling function must make the OS calls to get the
- * base address of the DWC_otg controller registers.  The core_params
- * argument holds the parameters that specify how the core should be
- * configured.
- *
- * @param[in] reg_base_addr Base address of DWC_otg core registers
- * @param[in] core_params Pointer to the core configuration parameters
- *
- */
-dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
-					dwc_otg_core_params_t *core_params)
-{
-	dwc_otg_core_if_t *core_if = 0;
-	dwc_otg_dev_if_t *dev_if = 0;
-	dwc_otg_host_if_t *host_if = 0;
-	uint8_t *reg_base = (uint8_t *)reg_base_addr;
-	int i = 0;
-
-	DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
-
-	core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
-
-	if (core_if == 0) {
-		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
-		return 0;
-	}
-
-	memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-
-	core_if->core_params = core_params;
-	core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
-
-	/*
-	 * Allocate the Device Mode structures.
-	 */
-	dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
-
-	if (dev_if == 0) {
-		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
-		kfree(core_if);
-		return 0;
-	}
-
-	dev_if->dev_global_regs =
-			(dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-
-	for (i=0; i<MAX_EPS_CHANNELS; i++)
-	{
-		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
-				(reg_base + DWC_DEV_IN_EP_REG_OFFSET +
-				 (i * DWC_EP_REG_OFFSET));
-
-		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
-				(reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
-				 (i * DWC_EP_REG_OFFSET));
-		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
-					i, &dev_if->in_ep_regs[i]->diepctl);
-		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
-					i, &dev_if->out_ep_regs[i]->doepctl);
-	}
-
-	dev_if->speed = 0; // unknown
-
-	core_if->dev_if = dev_if;
-
-	/*
-	 * Allocate the Host Mode structures.
-	 */
-	host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
-
-	if (host_if == 0) {
-		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
-		kfree(dev_if);
-		kfree(core_if);
-		return 0;
-	}
-
-	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
-			(reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-
-	host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-
-	for (i=0; i<MAX_EPS_CHANNELS; i++)
-	{
-		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
-				(reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
-				 (i * DWC_OTG_CHAN_REGS_OFFSET));
-		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-					i, &host_if->hc_regs[i]->hcchar);
-	}
-
-	host_if->num_host_channels = MAX_EPS_CHANNELS;
-	core_if->host_if = host_if;
-
-	for (i=0; i<MAX_EPS_CHANNELS; i++)
-	{
-		core_if->data_fifo[i] =
-				(uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
-							 (i * DWC_OTG_DATA_FIFO_SIZE));
-		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
-					i, (unsigned)core_if->data_fifo[i]);
-	}
-
-	core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-
-	/*
-	 * Store the contents of the hardware configuration registers here for
-	 * easy access later.
-	 */
-	core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
-	core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
-	core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
-	core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-
-	DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
-	DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
-	DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
-	DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-
-	core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-	core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-
-	DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
-	DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
-
-	DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
-	DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
-	DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
-	DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
-	DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
-	DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
-	DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-
-	DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
-	DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-
-	/*
-	 * Set the SRP sucess bit for FS-I2c
-	 */
-	core_if->srp_success = 0;
-	core_if->srp_timer_started = 0;
-
-
-	/*
-	 * Create new workqueue and init works
-	 */
-	core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
-	if(core_if->wq_otg == 0) {
-		DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
-		kfree(host_if);
-		kfree(dev_if);
-		kfree(core_if);
-		return 0 * HZ;
-	}
-	INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
-	INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
-
-	return core_if;
-}
-
-/**
- * This function frees the structures allocated by dwc_otg_cil_init().
- *
- * @param[in] core_if The core interface pointer returned from
- * dwc_otg_cil_init().
- *
- */
-void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
-{
-	/* Disable all interrupts */
-	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
-	dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
-
-	if (core_if->wq_otg) {
-		destroy_workqueue(core_if->wq_otg);
-	}
-	if (core_if->dev_if) {
-		kfree(core_if->dev_if);
-	}
-	if (core_if->host_if) {
-		kfree(core_if->host_if);
-	}
-	kfree(core_if);
-}
-
-/**
- * This function enables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
-{
-	gahbcfg_data_t ahbcfg = { .d32 = 0};
-	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-}
-
-/**
- * This function disables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
-{
-	gahbcfg_data_t ahbcfg = { .d32 = 0};
-	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-}
-
-/**
- * This function initializes the commmon interrupts, used in both
- * device and host modes.
- *
- * @param[in] core_if Programming view of the DWC_otg controller
- *
- */
-static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs =
-			core_if->core_global_regs;
-	gintmsk_data_t intr_mask = { .d32 = 0};
-
-	/* Clear any pending OTG Interrupts */
-	dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
-
-	/* Clear any pending interrupts */
-	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
-	/*
-	 * Enable the interrupts in the GINTMSK.
-	 */
-	intr_mask.b.modemismatch = 1;
-	intr_mask.b.otgintr = 1;
-
-	if (!core_if->dma_enable) {
-		intr_mask.b.rxstsqlvl = 1;
-	}
-
-	intr_mask.b.conidstschng = 1;
-	intr_mask.b.wkupintr = 1;
-	intr_mask.b.disconnect = 1;
-	intr_mask.b.usbsuspend = 1;
-	intr_mask.b.sessreqintr = 1;
-	dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
-}
-
-/**
- * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
- * type.
- */
-static void init_fslspclksel(dwc_otg_core_if_t *core_if)
-{
-	uint32_t	val;
-	hcfg_data_t		hcfg;
-
-	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
-		 (core_if->core_params->ulpi_fs_ls)) ||
-		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-		/* Full speed PHY */
-		val = DWC_HCFG_48_MHZ;
-	}
-	else {
-		/* High speed PHY running at full speed or high speed */
-		val = DWC_HCFG_30_60_MHZ;
-	}
-
-	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
-	hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-	hcfg.b.fslspclksel = val;
-	dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-}
-
-/**
- * Initializes the DevSpd field of the DCFG register depending on the PHY type
- * and the enumeration speed of the device.
- */
-static void init_devspd(dwc_otg_core_if_t *core_if)
-{
-	uint32_t	val;
-	dcfg_data_t		dcfg;
-
-	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
-		 (core_if->core_params->ulpi_fs_ls)) ||
-		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-		/* Full speed PHY */
-		val = 0x3;
-	}
-	else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-		/* High speed PHY running at full speed */
-		val = 0x1;
-	}
-	else {
-		/* High speed PHY running at high speed */
-		val = 0x0;
-	}
-
-	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-
-	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-	dcfg.b.devspd = val;
-	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-}
-
-/**
- * This function calculates the number of IN EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param core_if Programming view of the DWC_otg controller
- */
-static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
-{
-	uint32_t num_in_eps = 0;
-	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
-	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
-	int i;
-
-
-	for(i = 0; i < num_eps; ++i)
-	{
-		if(!(hwcfg1 & 0x1))
-			num_in_eps++;
-
-		hwcfg1 >>= 2;
-	}
-
-	if(core_if->hwcfg4.b.ded_fifo_en) {
-		num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
-	}
-
-	return num_in_eps;
-}
-
-
-/**
- * This function calculates the number of OUT EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param core_if Programming view of the DWC_otg controller
- */
-static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
-{
-	uint32_t num_out_eps = 0;
-	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
-	int i;
-
-	for(i = 0; i < num_eps; ++i)
-	{
-		if(!(hwcfg1 & 0x2))
-			num_out_eps++;
-
-		hwcfg1 >>= 2;
-	}
-	return num_out_eps;
-}
-/**
- * This function initializes the DWC_otg controller registers and
- * prepares the core for device mode or host mode operation.
- *
- * @param core_if Programming view of the DWC_otg controller
- *
- */
-void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
-{
-	int i = 0;
-	dwc_otg_core_global_regs_t *global_regs =
-			core_if->core_global_regs;
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	gahbcfg_data_t ahbcfg = { .d32 = 0 };
-	gusbcfg_data_t usbcfg = { .d32 = 0 };
-	gi2cctl_data_t i2cctl = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
-
-	/* Common Initialization */
-
-	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
-//	usbcfg.b.tx_end_delay = 1;
-	/* Program the ULPI External VBUS bit if needed */
-	usbcfg.b.ulpi_ext_vbus_drv =
-		(core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-
-	/* Set external TS Dline pulsing */
-	usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
-	dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
-
-	/* Reset the Controller */
-	dwc_otg_core_reset(core_if);
-
-	/* Initialize parameters from Hardware configuration registers. */
-	dev_if->num_in_eps = calc_num_in_eps(core_if);
-	dev_if->num_out_eps = calc_num_out_eps(core_if);
-
-
-	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
-
-	for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-	{
-		dev_if->perio_tx_fifo_size[i] =
-			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
-				i, dev_if->perio_tx_fifo_size[i]);
-	}
-
-	for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
-	{
-		dev_if->tx_fifo_size[i] =
-			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
-			i, dev_if->perio_tx_fifo_size[i]);
-	}
-
-	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
-	core_if->rx_fifo_size =
-			dwc_read_reg32(&global_regs->grxfsiz);
-	core_if->nperio_tx_fifo_size =
-			dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-
-	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
-	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
-	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
-
-	/* This programming sequence needs to happen in FS mode before any other
-	 * programming occurs */
-	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
-		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-			/* If FS mode with FS PHY */
-
-			/* core_init() is now called on every switch so only call the
-			 * following for the first time through. */
-			if (!core_if->phy_init_done) {
-				core_if->phy_init_done = 1;
-				DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
-				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-				usbcfg.b.physel = 1;
-				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
-				/* Reset after a PHY select */
-				dwc_otg_core_reset(core_if);
-			}
-
-			/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.	Also
-			 * do this on HNP Dev/Host mode switches (done in dev_init and
-			 * host_init). */
-			if (dwc_otg_is_host_mode(core_if)) {
-				init_fslspclksel(core_if);
-			}
-			else {
-				init_devspd(core_if);
-			}
-
-			if (core_if->core_params->i2c_enable) {
-				DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
-				/* Program GUSBCFG.OtgUtmifsSel to I2C */
-				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-				usbcfg.b.otgutmifssel = 1;
-				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
-				/* Program GI2CCTL.I2CEn */
-				i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
-				i2cctl.b.i2cdevaddr = 1;
-				i2cctl.b.i2cen = 0;
-				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-				i2cctl.b.i2cen = 1;
-				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-			}
-
-		} /* endif speed == DWC_SPEED_PARAM_FULL */
-
-		else {
-			/* High speed PHY. */
-			if (!core_if->phy_init_done) {
-				core_if->phy_init_done = 1;
-				/* HS PHY parameters.  These parameters are preserved
-				 * during soft reset so only program the first time.  Do
-				 * a soft reset immediately after setting phyif.  */
-				usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
-				if (usbcfg.b.ulpi_utmi_sel == 1) {
-					/* ULPI interface */
-					usbcfg.b.phyif = 0;
-					usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
-				}
-				else {
-					/* UTMI+ interface */
-					if (core_if->core_params->phy_utmi_width == 16) {
-						usbcfg.b.phyif = 1;
-				}
-				else {
-					usbcfg.b.phyif = 0;
-				}
-			}
-
-			dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-
-			/* Reset after setting the PHY parameters */
-			dwc_otg_core_reset(core_if);
-		}
-	}
-
-	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
-		(core_if->hwcfg2.b.fs_phy_type == 1) &&
-		(core_if->core_params->ulpi_fs_ls)) {
-		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
-		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-		usbcfg.b.ulpi_fsls = 1;
-		usbcfg.b.ulpi_clk_sus_m = 1;
-		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-	}
-	else {
-		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-		usbcfg.b.ulpi_fsls = 0;
-		usbcfg.b.ulpi_clk_sus_m = 0;
-		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-	}
-
-	/* Program the GAHBCFG Register.*/
-	switch (core_if->hwcfg2.b.architecture) {
-
-	case DWC_SLAVE_ONLY_ARCH:
-		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
-		ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-		core_if->dma_enable = 0;
-		core_if->dma_desc_enable = 0;
-		break;
-
-	case DWC_EXT_DMA_ARCH:
-		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
-		ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
-		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-		break;
-
-	case DWC_INT_DMA_ARCH:
-		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
-		ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
-		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-		break;
-
-	}
-	ahbcfg.b.dmaenable = core_if->dma_enable;
-	dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
-
-	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
-
-	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
-	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
-	DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
-	DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
-
-	/*
-	 * Program the GUSBCFG register.
-	 */
-	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
-	switch (core_if->hwcfg2.b.op_mode) {
-	case DWC_MODE_HNP_SRP_CAPABLE:
-		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
-		   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-		break;
-
-	case DWC_MODE_SRP_ONLY_CAPABLE:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-		break;
-
-	case DWC_MODE_NO_HNP_SRP_CAPABLE:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = 0;
-		break;
-
-	case DWC_MODE_SRP_CAPABLE_DEVICE:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-		break;
-
-	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = 0;
-		break;
-
-	case DWC_MODE_SRP_CAPABLE_HOST:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-		break;
-
-	case DWC_MODE_NO_SRP_CAPABLE_HOST:
-		usbcfg.b.hnpcap = 0;
-		usbcfg.b.srpcap = 0;
-		break;
-	}
-
-	dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-
-	/* Enable common interrupts */
-	dwc_otg_enable_common_interrupts(core_if);
-
-	/* Do device or host intialization based on mode during PCD
-	 * and HCD initialization  */
-	if (dwc_otg_is_host_mode(core_if)) {
-		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
-		core_if->op_state = A_HOST;
-	}
-	else {
-		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
-		core_if->op_state = B_PERIPHERAL;
-#ifdef DWC_DEVICE_ONLY
-		dwc_otg_core_dev_init(core_if);
-#endif
-	}
-}
-
-
-/**
- * This function enables the Device mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
-{
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	dwc_otg_core_global_regs_t *global_regs =
-		core_if->core_global_regs;
-
-	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
-	/* Disable all interrupts. */
-	dwc_write_reg32(&global_regs->gintmsk, 0);
-
-	/* Clear any pending interrupts */
-	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
-	/* Enable the common interrupts */
-	dwc_otg_enable_common_interrupts(core_if);
-
-	/* Enable interrupts */
-	intr_mask.b.usbreset = 1;
-	intr_mask.b.enumdone = 1;
-
-	if(!core_if->multiproc_int_enable) {
-		intr_mask.b.inepintr = 1;
-		intr_mask.b.outepintr = 1;
-	}
-
-	intr_mask.b.erlysuspend = 1;
-
-	if(core_if->en_multiple_tx_fifo == 0) {
-		intr_mask.b.epmismatch = 1;
-	}
-
-
-#ifdef DWC_EN_ISOC
-	if(core_if->dma_enable) {
-		if(core_if->dma_desc_enable == 0) {
-			if(core_if->pti_enh_enable) {
-				dctl_data_t dctl = { .d32 = 0 };
-				dctl.b.ifrmnum = 1;
-				dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-			} else {
-				intr_mask.b.incomplisoin = 1;
-				intr_mask.b.incomplisoout = 1;
-			}
-		}
-	} else {
-		intr_mask.b.incomplisoin = 1;
-		intr_mask.b.incomplisoout = 1;
-	}
-#endif // DWC_EN_ISOC
-
-/** @todo NGS: Should this be a module parameter? */
-#ifdef USE_PERIODIC_EP
-	intr_mask.b.isooutdrop = 1;
-	intr_mask.b.eopframe = 1;
-	intr_mask.b.incomplisoin = 1;
-	intr_mask.b.incomplisoout = 1;
-#endif
-
-	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-
-	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
-		dwc_read_reg32(&global_regs->gintmsk));
-}
-
-/**
- * This function initializes the DWC_otg controller registers for
- * device mode.
- *
- * @param core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
-{
-	int i,size;
-	u_int32_t *default_value_array;
-
-	dwc_otg_core_global_regs_t *global_regs =
-		core_if->core_global_regs;
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	dwc_otg_core_params_t *params = core_if->core_params;
-	dcfg_data_t dcfg = { .d32 = 0};
-	grstctl_t resetctl = { .d32 = 0 };
-	uint32_t rx_fifo_size;
-	fifosize_data_t nptxfifosize;
-	fifosize_data_t txfifosize;
-	dthrctl_data_t dthrctl;
-
-	/* Restart the Phy Clock */
-	dwc_write_reg32(core_if->pcgcctl, 0);
-
-	/* Device configuration register */
-	init_devspd(core_if);
-	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
-	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-
-	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-
-	/* Configure data FIFO sizes */
-	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
-		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
-		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-
-		/* Rx FIFO */
-		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-						dwc_read_reg32(&global_regs->grxfsiz));
-
-		rx_fifo_size = params->dev_rx_fifo_size;
-		dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
-
-		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-			dwc_read_reg32(&global_regs->grxfsiz));
-
-		/** Set Periodic Tx FIFO Mask all bits 0 */
-		core_if->p_tx_msk = 0;
-
-		/** Set Tx FIFO Mask all bits 0 */
-		core_if->tx_msk = 0;
-
-		/* Non-periodic Tx FIFO */
-		DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-				dwc_read_reg32(&global_regs->gnptxfsiz));
-
-		nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
-		nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-
-		dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-
-		DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-				dwc_read_reg32(&global_regs->gnptxfsiz));
-
-		txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-		if(core_if->en_multiple_tx_fifo == 0) {
-			//core_if->hwcfg4.b.ded_fifo_en==0
-
-			/**@todo NGS: Fix Periodic FIFO Sizing! */
-			/*
-			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
-			 * Indexes of the FIFO size module parameters in the
-			 * dev_perio_tx_fifo_size array and the FIFO size registers in
-			 * the dptxfsiz array run from 0 to 14.
-			 */
-			/** @todo Finish debug of this */
-			size=core_if->hwcfg4.b.num_dev_perio_in_ep;
-			default_value_array=params->dev_perio_tx_fifo_size;
-
-		}
-		else {
-			//core_if->hwcfg4.b.ded_fifo_en==1
-			/*
-			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
-			 * Indexes of the FIFO size module parameters in the
-			 * dev_tx_fifo_size array and the FIFO size registers in
-			 * the dptxfsiz_dieptxf array run from 0 to 14.
-			 */
-
-			size=core_if->hwcfg4.b.num_in_eps;
-			default_value_array=params->dev_tx_fifo_size;
-
-		}
-		for (i=0; i < size; i++)
-		{
-
-			txfifosize.b.depth = default_value_array[i];
-			DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
-				dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-			dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
-				txfifosize.d32);
-			DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
-				dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-			txfifosize.b.startaddr += txfifosize.b.depth;
-		}
-	}
-	/* Flush the FIFOs */
-	dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
-	dwc_otg_flush_rx_fifo(core_if);
-
-	/* Flush the Learning Queue. */
-	resetctl.b.intknqflsh = 1;
-	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-
-	/* Clear all pending Device Interrupts */
-
-	if(core_if->multiproc_int_enable) {
-	}
-
-	/** @todo - if the condition needed to be checked
-	 *  or in any case all pending interrutps should be cleared?
-         */
-	if(core_if->multiproc_int_enable) {
-		for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-		        dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
-		}
-
-		for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-		        dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
-		}
-
-		dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
-		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
-	} else {
-                dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
-                dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
-                dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
-                dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
-	}
-
-	for (i=0; i <= dev_if->num_in_eps; i++)
-	{
-		depctl_data_t depctl;
-		depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-		if (depctl.b.epena) {
-			depctl.d32 = 0;
-			depctl.b.epdis = 1;
-			depctl.b.snak = 1;
-		}
-		else {
-			depctl.d32 = 0;
-		}
-
-		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-
-
-		dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
-		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
-		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
-	}
-
-	for (i=0; i <= dev_if->num_out_eps; i++)
-	{
-		depctl_data_t depctl;
-		depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-		if (depctl.b.epena) {
-			depctl.d32 = 0;
-			depctl.b.epdis = 1;
-			depctl.b.snak = 1;
-		}
-		else {
-			depctl.d32 = 0;
-		}
-
-		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-
-		dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
-		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
-		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
-	}
-
-	if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
-		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
-		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
-		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
-
-		dev_if->rx_thr_length = params->rx_thr_length;
-		dev_if->tx_thr_length = params->tx_thr_length;
-
-		dev_if->setup_desc_index = 0;
-
-		dthrctl.d32 = 0;
-		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
-		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
-		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
-		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
-		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-
-		dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
-
-		DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
-			dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
-
-	}
-
-	dwc_otg_enable_device_interrupts(core_if);
-
-	{
-		diepmsk_data_t msk = { .d32 = 0 };
-		msk.b.txfifoundrn = 1;
-	        if(core_if->multiproc_int_enable) {
-			dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
-	        } else {
-			dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
-	        }
-	}
-
-
-	if(core_if->multiproc_int_enable) {
-		/* Set NAK on Babble */
-		dctl_data_t dctl = { .d32 = 0};
-		dctl.b.nakonbble = 1;
-		dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
-	}
-}
-
-/**
- * This function enables the Host mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	gintmsk_data_t intr_mask = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
-	/* Disable all interrupts. */
-	dwc_write_reg32(&global_regs->gintmsk, 0);
-
-	/* Clear any pending interrupts. */
-	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
-	/* Enable the common interrupts */
-	dwc_otg_enable_common_interrupts(core_if);
-
-	/*
-	 * Enable host mode interrupts without disturbing common
-	 * interrupts.
-	 */
-	intr_mask.b.sofintr = 1;
-	intr_mask.b.portintr = 1;
-	intr_mask.b.hcintr = 1;
-
-	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-}
-
-/**
- * This function disables the Host Mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs =
-	core_if->core_global_regs;
-	gintmsk_data_t intr_mask = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-
-	/*
-	 * Disable host mode interrupts without disturbing common
-	 * interrupts.
-	 */
-	intr_mask.b.sofintr = 1;
-	intr_mask.b.portintr = 1;
-	intr_mask.b.hcintr = 1;
-	intr_mask.b.ptxfempty = 1;
-	intr_mask.b.nptxfempty = 1;
-
-	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-}
-
-/**
- * This function initializes the DWC_otg controller registers for
- * host mode.
- *
- * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- * request queues. Host channels are reset to ensure that they are ready for
- * performing transfers.
- *
- * @param core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	dwc_otg_host_if_t	*host_if = core_if->host_if;
-	dwc_otg_core_params_t	*params = core_if->core_params;
-	hprt0_data_t		hprt0 = { .d32 = 0 };
-	fifosize_data_t		nptxfifosize;
-	fifosize_data_t		ptxfifosize;
-	int			i;
-	hcchar_data_t		hcchar;
-	hcfg_data_t		hcfg;
-	dwc_otg_hc_regs_t	*hc_regs;
-	int			num_channels;
-	gotgctl_data_t	gotgctl = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
-
-	/* Restart the Phy Clock */
-	dwc_write_reg32(core_if->pcgcctl, 0);
-
-	/* Initialize Host Configuration Register */
-	init_fslspclksel(core_if);
-	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
-	{
-		hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-		hcfg.b.fslssupp = 1;
-		dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
-	}
-
-	/* Configure data FIFO sizes */
-	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-		DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
-		DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
-		DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
-		DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-
-		/* Rx FIFO */
-		DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-		dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
-		DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-
-		/* Non-periodic Tx FIFO */
-		DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-		nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
-		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
-		dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-		DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-
-		/* Periodic Tx FIFO */
-		DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-		ptxfifosize.b.depth	 = params->host_perio_tx_fifo_size;
-		ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-		dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
-		DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-	}
-
-	/* Clear Host Set HNP Enable in the OTG Control Register */
-	gotgctl.b.hstsethnpen = 1;
-	dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
-
-	/* Make sure the FIFOs are flushed. */
-	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
-	dwc_otg_flush_rx_fifo(core_if);
-
-	/* Flush out any leftover queued requests. */
-	num_channels = core_if->core_params->host_channels;
-	for (i = 0; i < num_channels; i++)
-	{
-		hc_regs = core_if->host_if->hc_regs[i];
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		hcchar.b.chen = 0;
-		hcchar.b.chdis = 1;
-		hcchar.b.epdir = 0;
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-	}
-
-	/* Halt all channels to put them into a known state. */
-	for (i = 0; i < num_channels; i++)
-	{
-		int count = 0;
-		hc_regs = core_if->host_if->hc_regs[i];
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		hcchar.b.chen = 1;
-		hcchar.b.chdis = 1;
-		hcchar.b.epdir = 0;
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-		DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
-		do {
-			hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-			if (++count > 200)
-			{
-				DWC_ERROR("%s: Unable to clear halt on channel %d\n",
-					  __func__, i);
-				break;
-			}
-			udelay(100);
-		}
-		while (hcchar.b.chen);
-	}
-
-	/* Turn on the vbus power. */
-	DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
-	if (core_if->op_state == A_HOST) {
-		hprt0.d32 = dwc_otg_read_hprt0(core_if);
-		DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-		if (hprt0.b.prtpwr == 0) {
-			hprt0.b.prtpwr = 1;
-			dwc_write_reg32(host_if->hprt0, hprt0.d32);
-		}
-	}
-
-	dwc_otg_enable_host_interrupts(core_if);
-}
-
-/**
- * Prepares a host channel for transferring packets to/from a specific
- * endpoint. The HCCHARn register is set up with the characteristics specified
- * in _hc. Host channel interrupts that may need to be serviced while this
- * transfer is in progress are enabled.
- *
- * @param core_if Programming view of DWC_otg controller
- * @param hc Information needed to initialize the host channel
- */
-void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	uint32_t intr_enable;
-	hcintmsk_data_t hc_intr_mask;
-	gintmsk_data_t gintmsk = { .d32 = 0 };
-	hcchar_data_t hcchar;
-	hcsplt_data_t hcsplt;
-
-	uint8_t hc_num = hc->hc_num;
-	dwc_otg_host_if_t *host_if = core_if->host_if;
-	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-
-	/* Clear old interrupt conditions for this host channel. */
-	hc_intr_mask.d32 = 0xFFFFFFFF;
-	hc_intr_mask.b.reserved = 0;
-	dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-
-	/* Enable channel interrupts required for this transfer. */
-	hc_intr_mask.d32 = 0;
-	hc_intr_mask.b.chhltd = 1;
-	if (core_if->dma_enable) {
-		hc_intr_mask.b.ahberr = 1;
-		/* Always record the first nak interrupt for bulk
-		 * packets. */
-		if (hc->error_state && !hc->do_split &&
-			hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-			hc_intr_mask.b.ack = 1;
-			if (hc->ep_is_in) {
-				hc_intr_mask.b.datatglerr = 1;
-				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-					hc_intr_mask.b.nak = 1;
-				}
-			}
-		}
-	}
-	else {
-		switch (hc->ep_type) {
-		case DWC_OTG_EP_TYPE_CONTROL:
-		case DWC_OTG_EP_TYPE_BULK:
-			hc_intr_mask.b.xfercompl = 1;
-			hc_intr_mask.b.stall = 1;
-			hc_intr_mask.b.xacterr = 1;
-			hc_intr_mask.b.datatglerr = 1;
-			if (hc->ep_is_in) {
-				hc_intr_mask.b.bblerr = 1;
-			}
-			else {
-				hc_intr_mask.b.nak = 1;
-				hc_intr_mask.b.nyet = 1;
-				if (hc->do_ping) {
-					hc_intr_mask.b.ack = 1;
-				}
-			}
-
-			if (hc->do_split) {
-				hc_intr_mask.b.nak = 1;
-				if (hc->complete_split) {
-					hc_intr_mask.b.nyet = 1;
-				}
-				else {
-					hc_intr_mask.b.ack = 1;
-				}
-			}
-
-			if (hc->error_state) {
-				hc_intr_mask.b.ack = 1;
-			}
-			break;
-		case DWC_OTG_EP_TYPE_INTR:
-			hc_intr_mask.b.xfercompl = 1;
-			hc_intr_mask.b.nak = 1;
-			hc_intr_mask.b.stall = 1;
-			hc_intr_mask.b.xacterr = 1;
-			hc_intr_mask.b.datatglerr = 1;
-			hc_intr_mask.b.frmovrun = 1;
-
-			if (hc->ep_is_in) {
-				hc_intr_mask.b.bblerr = 1;
-			}
-			if (hc->error_state) {
-				hc_intr_mask.b.ack = 1;
-			}
-			if (hc->do_split) {
-				if (hc->complete_split) {
-					hc_intr_mask.b.nyet = 1;
-				}
-				else {
-					hc_intr_mask.b.ack = 1;
-				}
-			}
-			break;
-		case DWC_OTG_EP_TYPE_ISOC:
-			hc_intr_mask.b.xfercompl = 1;
-			hc_intr_mask.b.frmovrun = 1;
-			hc_intr_mask.b.ack = 1;
-
-			if (hc->ep_is_in) {
-				hc_intr_mask.b.xacterr = 1;
-				hc_intr_mask.b.bblerr = 1;
-			}
-			break;
-		}
-	}
-	dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-
-//	if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
-//			hc->max_packet = 512;
-	/* Enable the top level host channel interrupt. */
-	intr_enable = (1 << hc_num);
-	dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-
-	/* Make sure host channel interrupts are enabled. */
-	gintmsk.b.hcintr = 1;
-	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-
-	/*
-	 * Program the HCCHARn register with the endpoint characteristics for
-	 * the current transfer.
-	 */
-	hcchar.d32 = 0;
-	hcchar.b.devaddr = hc->dev_addr;
-	hcchar.b.epnum = hc->ep_num;
-	hcchar.b.epdir = hc->ep_is_in;
-	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
-	hcchar.b.eptype = hc->ep_type;
-	hcchar.b.mps = hc->max_packet;
-
-	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-
-	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-	DWC_DEBUGPL(DBG_HCDV, "	 Dev Addr: %d\n", hcchar.b.devaddr);
-	DWC_DEBUGPL(DBG_HCDV, "	 Ep Num: %d\n", hcchar.b.epnum);
-	DWC_DEBUGPL(DBG_HCDV, "	 Is In: %d\n", hcchar.b.epdir);
-	DWC_DEBUGPL(DBG_HCDV, "	 Is Low Speed: %d\n", hcchar.b.lspddev);
-	DWC_DEBUGPL(DBG_HCDV, "	 Ep Type: %d\n", hcchar.b.eptype);
-	DWC_DEBUGPL(DBG_HCDV, "	 Max Pkt: %d\n", hcchar.b.mps);
-	DWC_DEBUGPL(DBG_HCDV, "	 Multi Cnt: %d\n", hcchar.b.multicnt);
-
-	/*
-	 * Program the HCSPLIT register for SPLITs
-	 */
-	hcsplt.d32 = 0;
-	if (hc->do_split) {
-		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
-			   hc->complete_split ? "CSPLIT" : "SSPLIT");
-		hcsplt.b.compsplt = hc->complete_split;
-		hcsplt.b.xactpos = hc->xact_pos;
-		hcsplt.b.hubaddr = hc->hub_addr;
-		hcsplt.b.prtaddr = hc->port_addr;
-		DWC_DEBUGPL(DBG_HCDV, "	  comp split %d\n", hc->complete_split);
-		DWC_DEBUGPL(DBG_HCDV, "	  xact pos %d\n", hc->xact_pos);
-		DWC_DEBUGPL(DBG_HCDV, "	  hub addr %d\n", hc->hub_addr);
-		DWC_DEBUGPL(DBG_HCDV, "	  port addr %d\n", hc->port_addr);
-		DWC_DEBUGPL(DBG_HCDV, "	  is_in %d\n", hc->ep_is_in);
-		DWC_DEBUGPL(DBG_HCDV, "	  Max Pkt: %d\n", hcchar.b.mps);
-		DWC_DEBUGPL(DBG_HCDV, "	  xferlen: %d\n", hc->xfer_len);
-	}
-	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-
-}
-
-/**
- * Attempts to halt a host channel. This function should only be called in
- * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
- * normal circumstances in DMA mode, the controller halts the channel when the
- * transfer is complete or a condition occurs that requires application
- * intervention.
- *
- * In slave mode, checks for a free request queue entry, then sets the Channel
- * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
- * request queue entry, sets only the Channel Disable bit of the HCCHARn
- * register to flush requests for this channel. In the latter case, sets a
- * flag to indicate that the host channel needs to be halted when a request
- * queue slot is open.
- *
- * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- * HCCHARn register. The controller ensures there is space in the request
- * queue before submitting the halt request.
- *
- * Some time may elapse before the core flushes any posted requests for this
- * host channel and halts. The Channel Halted interrupt handler completes the
- * deactivation of the host channel.
- *
- * @param core_if Controller register interface.
- * @param hc Host channel to halt.
- * @param halt_status Reason for halting the channel.
- */
-void dwc_otg_hc_halt(dwc_otg_hcd_t *hcd,
-			 dwc_hc_t *hc,
-			 dwc_otg_halt_status_e halt_status)
-{
-	gnptxsts_data_t			nptxsts;
-	hptxsts_data_t			hptxsts;
-	hcchar_data_t			hcchar;
-	dwc_otg_hc_regs_t		*hc_regs;
-	dwc_otg_core_global_regs_t	*global_regs;
-	dwc_otg_host_global_regs_t	*host_global_regs;
-	dwc_otg_core_if_t *core_if = hcd->core_if;
-
-	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-	global_regs = core_if->core_global_regs;
-	host_global_regs = core_if->host_if->host_global_regs;
-
-	WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-
-	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-		halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-		/*
-		 * Disable all channel interrupts except Ch Halted. The QTD
-		 * and QH state associated with this transfer has been cleared
-		 * (in the case of URB_DEQUEUE), so the channel needs to be
-		 * shut down carefully to prevent crashes.
-		 */
-		hcintmsk_data_t hcintmsk;
-		hcintmsk.d32 = 0;
-		hcintmsk.b.chhltd = 1;
-		dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-
-		/*
-		 * Make sure no other interrupts besides halt are currently
-		 * pending. Handling another interrupt could cause a crash due
-		 * to the QTD and QH state.
-		 */
-		dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-
-		/*
-		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-		 * even if the channel was already halted for some other
-		 * reason.
-		 */
-		hc->halt_status = halt_status;
-
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		if (hcchar.b.chen == 0) {
-			/*
-			 * The channel is either already halted or it hasn't
-			 * started yet. In DMA mode, the transfer may halt if
-			 * it finishes normally or a condition occurs that
-			 * requires driver intervention. Don't want to halt
-			 * the channel again. In either Slave or DMA mode,
-			 * it's possible that the transfer has been assigned
-			 * to a channel, but not started yet when an URB is
-			 * dequeued. Don't want to halt a channel that hasn't
-			 * started yet.
-			 */
-			return;
-		}
-	}
-
-	if (hc->halt_pending) {
-		/*
-		 * A halt has already been issued for this channel. This might
-		 * happen when a transfer is aborted by a higher level in
-		 * the stack.
-		 */
-#ifdef DEBUG
-		DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
-			  __func__, hc->hc_num);
-
-/*		dwc_otg_dump_global_registers(core_if); */
-/*		dwc_otg_dump_host_registers(core_if); */
-#endif
-		return;
-	}
-
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.chen = 1;
-	hcchar.b.chdis = 1;
-
-	if (!core_if->dma_enable) {
-		/* Check for space in the request queue to issue the halt. */
-		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-			hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-			nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-			if (nptxsts.b.nptxqspcavail == 0) {
-				hcchar.b.chen = 0;
-			}
-		}
-		else {
-			hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
-			if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
-				hcchar.b.chen = 0;
-			}
-		}
-	}
-
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
-	hc->halt_status = halt_status;
-
-	if (!hc->halt_on_queue && !hc->halt_pending && hc->qh->nak_frame != 0xffff)
-		hcd->nakking_channels--;
-
-	if (hcchar.b.chen) {
-		hc->halt_pending = 1;
-		hc->halt_on_queue = 0;
-	}
-	else {
-		hc->halt_on_queue = 1;
-	}
-
-	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
-	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
-	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
-	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
-
-	return;
-}
-
-/**
- * Clears the transfer state for a host channel. This function is normally
- * called after a transfer is done and the host channel is being released.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Identifies the host channel to clean up.
- */
-void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	dwc_otg_hc_regs_t *hc_regs;
-
-	hc->xfer_started = 0;
-
-	/*
-	 * Clear channel interrupt enables and any unhandled channel interrupt
-	 * conditions.
-	 */
-	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-	dwc_write_reg32(&hc_regs->hcintmsk, 0);
-	dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-
-#ifdef DEBUG
-	del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-	{
-		hcchar_data_t hcchar;
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		if (hcchar.b.chdis) {
-			DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-				 __func__, hc->hc_num, hcchar.d32);
-		}
-	}
-#endif
-}
-
-/**
- * Sets the channel property that indicates in which frame a periodic transfer
- * should occur. This is always set to the _next_ frame. This function has no
- * effect on non-periodic transfers.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Identifies the host channel to set up and its properties.
- * @param hcchar Current value of the HCCHAR register for the specified host
- * channel.
- */
-static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
-					 dwc_hc_t *hc,
-					 hcchar_data_t *hcchar)
-{
-	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-		hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-		hfnum_data_t	hfnum;
-		hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
-
-		/* 1 if _next_ frame is odd, 0 if it's even */
-		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-#ifdef DEBUG
-		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
-			switch (hfnum.b.frnum & 0x7) {
-			case 7:
-				core_if->hfnum_7_samples++;
-				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
-				break;
-			case 0:
-				core_if->hfnum_0_samples++;
-				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
-				break;
-			default:
-				core_if->hfnum_other_samples++;
-				core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
-				break;
-			}
-		}
-#endif
-	}
-}
-
-#ifdef DEBUG
-static void hc_xfer_timeout(unsigned long ptr)
-{
-	hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
-	int hc_num = xfer_info->hc->hc_num;
-	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-	DWC_WARN("	start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-}
-#endif
-
-/*
- * This function does the setup for a data transfer for a host channel and
- * starts the transfer. May be called in either Slave mode or DMA mode. In
- * Slave mode, the caller must ensure that there is sufficient space in the
- * request queue and Tx Data FIFO.
- *
- * For an OUT transfer in Slave mode, it loads a data packet into the
- * appropriate FIFO. If necessary, additional data packets will be loaded in
- * the Host ISR.
- *
- * For an IN transfer in Slave mode, a data packet is requested. The data
- * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- * additional data packets are requested in the Host ISR.
- *
- * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- * register along with a packet count of 1 and the channel is enabled. This
- * causes a single PING transaction to occur. Other fields in HCTSIZ are
- * simply set to 0 since no data transfer occurs in this case.
- *
- * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- * all the information required to perform the subsequent data transfer. In
- * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- * controller performs the entire PING protocol, then starts the data
- * transfer.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Information needed to initialize the host channel. The xfer_len
- * value may be reduced to accommodate the max widths of the XferSize and
- * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- * to reflect the final xfer_len value.
- */
-void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	hcchar_data_t hcchar;
-	hctsiz_data_t hctsiz;
-	uint16_t num_packets;
-	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
-	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
-	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
-	hctsiz.d32 = 0;
-
-	if (hc->do_ping) {
-		if (!core_if->dma_enable) {
-			dwc_otg_hc_do_ping(core_if, hc);
-			hc->xfer_started = 1;
-			return;
-		}
-		else {
-			hctsiz.b.dopng = 1;
-		}
-	}
-
-	if (hc->do_split) {
-		num_packets = 1;
-
-		if (hc->complete_split && !hc->ep_is_in) {
-			/* For CSPLIT OUT Transfer, set the size to 0 so the
-			 * core doesn't expect any data written to the FIFO */
-			hc->xfer_len = 0;
-		}
-		else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
-			hc->xfer_len = hc->max_packet;
-		}
-		else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
-			hc->xfer_len = 188;
-		}
-
-		hctsiz.b.xfersize = hc->xfer_len;
-	}
-	else {
-		/*
-		 * Ensure that the transfer length and packet count will fit
-		 * in the widths allocated for them in the HCTSIZn register.
-		 */
-		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-			/*
-			 * Make sure the transfer size is no larger than one
-			 * (micro)frame's worth of data. (A check was done
-			 * when the periodic transfer was accepted to ensure
-			 * that a (micro)frame's worth of data can be
-			 * programmed into a channel.)
-			 */
-			uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
-			if (hc->xfer_len > max_periodic_len) {
-				hc->xfer_len = max_periodic_len;
-			}
-			else {
-			}
-		}
-		else if (hc->xfer_len > max_hc_xfer_size) {
-			/* Make sure that xfer_len is a multiple of max packet size. */
-			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
-		}
-
-		if (hc->xfer_len > 0) {
-			num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
-			if (num_packets > max_hc_pkt_count) {
-				num_packets = max_hc_pkt_count;
-				hc->xfer_len = num_packets * hc->max_packet;
-			}
-		}
-		else {
-			/* Need 1 packet for transfer length of 0. */
-			num_packets = 1;
-		}
-
-#if 0
-//host testusb item 10, would do series of Control transfer
-//with URB_SHORT_NOT_OK set in transfer_flags ,
-//changing the xfer_len would cause the test fail
-		if (hc->ep_is_in) {
-			/* Always program an integral # of max packets for IN transfers. */
-			hc->xfer_len = num_packets * hc->max_packet;
-		}
-#endif
-
-		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-			/*
-			 * Make sure that the multi_count field matches the
-			 * actual transfer length.
-			 */
-			hc->multi_count = num_packets;
-		}
-
-		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-			/* Set up the initial PID for the transfer. */
-			if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-				if (hc->ep_is_in) {
-					if (hc->multi_count == 1) {
-						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-					}
-					else if (hc->multi_count == 2) {
-						hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-					}
-					else {
-						hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
-					}
-				}
-				else {
-					if (hc->multi_count == 1) {
-						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-					}
-					else {
-						hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
-					}
-				}
-			}
-			else {
-				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-			}
-		}
-
-		hctsiz.b.xfersize = hc->xfer_len;
-	}
-
-	hc->start_pkt_count = num_packets;
-	hctsiz.b.pktcnt = num_packets;
-	hctsiz.b.pid = hc->data_pid_start;
-	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
-	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-	DWC_DEBUGPL(DBG_HCDV, "  Xfer Size: %d\n", hctsiz.b.xfersize);
-	DWC_DEBUGPL(DBG_HCDV, "  Num Pkts: %d\n", hctsiz.b.pktcnt);
-	DWC_DEBUGPL(DBG_HCDV, "  Start PID: %d\n", hctsiz.b.pid);
-
-	if (core_if->dma_enable) {
-		dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
-	}
-
-	/* Start the split */
-	if (hc->do_split) {
-		hcsplt_data_t hcsplt;
-		hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
-		hcsplt.b.spltena = 1;
-		dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
-	}
-
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.multicnt = hc->multi_count;
-	hc_set_even_odd_frame(core_if, hc, &hcchar);
-#ifdef DEBUG
-	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
-	if (hcchar.b.chdis) {
-		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-			 __func__, hc->hc_num, hcchar.d32);
-	}
-#endif
-
-	/* Set host channel enable after all other setup is complete. */
-	hcchar.b.chen = 1;
-	hcchar.b.chdis = 0;
-
-	/* Memory Barrier before enabling channel ensure the channel is setup correct */
-	mb();
-
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
-	hc->xfer_started = 1;
-	hc->requests++;
-
-	if (!core_if->dma_enable &&
-		!hc->ep_is_in && hc->xfer_len > 0) {
-		/* Load OUT packet into the appropriate Tx FIFO. */
-		dwc_otg_hc_write_packet(core_if, hc);
-	}
-
-#ifdef DEBUG
-	/* Start a timer for this transfer */
-	core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
-	core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
-	core_if->hc_xfer_info[hc->hc_num].hc = hc;
-	core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
-	core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
-	add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-#endif
-}
-
-/**
- * This function continues a data transfer that was started by previous call
- * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
- * sufficient space in the request queue and Tx Data FIFO. This function
- * should only be called in Slave mode. In DMA mode, the controller acts
- * autonomously to complete transfers programmed to a host channel.
- *
- * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
- * if there is any data remaining to be queued. For an IN transfer, another
- * data packet is always requested. For the SETUP phase of a control transfer,
- * this function does nothing.
- *
- * @return 1 if a new request is queued, 0 if no more requests are required
- * for this transfer.
- */
-int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-
-	if (hc->do_split) {
-		/* SPLITs always queue just once per channel */
-		return 0;
-	}
-	else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-		/* SETUPs are queued only once since they can't be NAKed. */
-		return 0;
-	}
-	else if (hc->ep_is_in) {
-		/*
-		 * Always queue another request for other IN transfers. If
-		 * back-to-back INs are issued and NAKs are received for both,
-		 * the driver may still be processing the first NAK when the
-		 * second NAK is received. When the interrupt handler clears
-		 * the NAK interrupt for the first NAK, the second NAK will
-		 * not be seen. So we can't depend on the NAK interrupt
-		 * handler to requeue a NAKed request. Instead, IN requests
-		 * are issued each time this function is called. When the
-		 * transfer completes, the extra requests for the channel will
-		 * be flushed.
-		 */
-		hcchar_data_t hcchar;
-		dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		hc_set_even_odd_frame(core_if, hc, &hcchar);
-		hcchar.b.chen = 1;
-		hcchar.b.chdis = 0;
-		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n", hcchar.d32);
-
-		/* Memory Barrier before enabling channel ensure the channel is setup correct */
-		mb();
-
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-		hc->requests++;
-		return 1;
-	}
-	else {
-		/* OUT transfers. */
-		if (hc->xfer_count < hc->xfer_len) {
-			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-				hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-				hcchar_data_t hcchar;
-				dwc_otg_hc_regs_t *hc_regs;
-				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-				hc_set_even_odd_frame(core_if, hc, &hcchar);
-			}
-
-			/* Load OUT packet into the appropriate Tx FIFO. */
-			dwc_otg_hc_write_packet(core_if, hc);
-			hc->requests++;
-			return 1;
-		}
-		else {
-			return 0;
-		}
-	}
-}
-
-/**
- * Starts a PING transfer. This function should only be called in Slave mode.
- * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
- */
-void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	hcchar_data_t hcchar;
-	hctsiz_data_t hctsiz;
-	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
-	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-
-	hctsiz.d32 = 0;
-	hctsiz.b.dopng = 1;
-	hctsiz.b.pktcnt = 1;
-	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.chen = 1;
-	hcchar.b.chdis = 0;
-
-	/* Memory Barrier before enabling channel ensure the channel is setup correct */
-	mb();
-
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-}
-
-/*
- * This function writes a packet into the Tx FIFO associated with the Host
- * Channel. For a channel associated with a non-periodic EP, the non-periodic
- * Tx FIFO is written. For a channel associated with a periodic EP, the
- * periodic Tx FIFO is written. This function should only be called in Slave
- * mode.
- *
- * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
- * then number of bytes written to the Tx FIFO.
- */
-void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
-	uint32_t i;
-	uint32_t remaining_count;
-	uint32_t byte_count;
-	uint32_t dword_count;
-
-	uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
-	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
-
-	remaining_count = hc->xfer_len - hc->xfer_count;
-	if (remaining_count > hc->max_packet) {
-		byte_count = hc->max_packet;
-	}
-	else {
-		byte_count = remaining_count;
-	}
-
-	dword_count = (byte_count + 3) / 4;
-
-	if ((((unsigned long)data_buff) & 0x3) == 0) {
-		/* xfer_buff is DWORD aligned. */
-		for (i = 0; i < dword_count; i++, data_buff++)
-		{
-			dwc_write_reg32(data_fifo, *data_buff);
-		}
-	}
-	else {
-		/* xfer_buff is not DWORD aligned. */
-		for (i = 0; i < dword_count; i++, data_buff++)
-		{
-			dwc_write_reg32(data_fifo, get_unaligned(data_buff));
-		}
-	}
-
-	hc->xfer_count += byte_count;
-	hc->xfer_buff += byte_count;
-}
-
-/**
- * Gets the current USB frame number. This is the frame number from the last
- * SOF packet.
- */
-uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
-{
-	dsts_data_t dsts;
-	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
-	/* read current frame/microframe number from DSTS register */
-	return dsts.b.soffn;
-}
-
-/**
- * This function reads a setup packet from the Rx FIFO into the destination
- * buffer.	This function is called from the Rx Status Queue Level (RxStsQLvl)
- * Interrupt routine when a SETUP packet has been received in Slave mode.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dest Destination buffer for packet data.
- */
-void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
-{
-	/* Get the 8 bytes of a setup transaction data */
-
-	/* Pop 2 DWORDS off the receive data FIFO into memory */
-	dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
-	dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
-}
-
-
-/**
- * This function enables EP0 OUT to receive SETUP packets and configures EP0
- * IN for transmitting packets.	 It is normally called when the
- * "Enumeration Done" interrupt occurs.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	dsts_data_t dsts;
-	depctl_data_t diepctl;
-	depctl_data_t doepctl;
-	dctl_data_t dctl = { .d32 = 0 };
-
-	/* Read the Device Status and Endpoint 0 Control registers */
-	dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
-	diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
-	doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-
-	/* Set the MPS of the IN EP based on the enumeration speed */
-	switch (dsts.b.enumspd) {
-	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
-		break;
-	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
-		break;
-	}
-
-	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-
-	/* Enable OUT EP for receive */
-	doepctl.b.epena = 1;
-	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-
-#ifdef VERBOSE
-	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-		dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-		dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-#endif
-	dctl.b.cgnpinnak = 1;
-
-	dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-	DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
-		dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-}
-
-/**
- * This function activates an EP.  The Device EP control register for
- * the EP is configured as defined in the ep structure.	 Note: This
- * function is not used for EP0.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to activate.
- */
-void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	depctl_data_t depctl;
-	volatile uint32_t *addr;
-	daint_data_t daintmsk = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
-		(ep->is_in?"IN":"OUT"));
-
-	/* Read DEPCTLn register */
-	if (ep->is_in == 1) {
-		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
-		daintmsk.ep.in = 1<<ep->num;
-	}
-	else {
-		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
-		daintmsk.ep.out = 1<<ep->num;
-	}
-
-	/* If the EP is already active don't change the EP Control
-	 * register. */
-	depctl.d32 = dwc_read_reg32(addr);
-	if (!depctl.b.usbactep) {
-		depctl.b.mps = ep->maxpacket;
-		depctl.b.eptype = ep->type;
-		depctl.b.txfnum = ep->tx_fifo_num;
-
-		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-			depctl.b.setd0pid = 1; // ???
-		}
-		else {
-			depctl.b.setd0pid = 1;
-		}
-		depctl.b.usbactep = 1;
-
-		dwc_write_reg32(addr, depctl.d32);
-		DWC_DEBUGPL(DBG_PCDV,"DEPCTL(%.8x)=%08x\n",(u32)addr, dwc_read_reg32(addr));
-	}
-
-	/* Enable the Interrupt for this EP */
-	if(core_if->multiproc_int_enable) {
-		if (ep->is_in == 1) {
-			diepmsk_data_t diepmsk = { .d32 = 0};
-			diepmsk.b.xfercompl = 1;
-			diepmsk.b.timeout = 1;
-			diepmsk.b.epdisabled = 1;
-			diepmsk.b.ahberr = 1;
-			diepmsk.b.intknepmis = 1;
-			diepmsk.b.txfifoundrn = 1; //?????
-
-
-			if(core_if->dma_desc_enable) {
-				diepmsk.b.bna = 1;
-			}
-
-/*
-			if(core_if->dma_enable) {
-				diepmsk.b.nak = 1;
-			}
-*/
-			dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
-
-		} else {
-			doepmsk_data_t doepmsk = { .d32 = 0};
-			doepmsk.b.xfercompl = 1;
-			doepmsk.b.ahberr = 1;
-			doepmsk.b.epdisabled = 1;
-
-
-			if(core_if->dma_desc_enable) {
-				doepmsk.b.bna = 1;
-			}
-/*
-			doepmsk.b.babble = 1;
-			doepmsk.b.nyet = 1;
-			doepmsk.b.nak = 1;
-*/
-			dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
-		}
-		dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
-			 0, daintmsk.d32);
-	} else {
-		dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
-				 0, daintmsk.d32);
-	}
-
-	DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
-		dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
-
-	ep->stall_clear_flag = 0;
-	return;
-}
-
-/**
- * This function deactivates an EP. This is done by clearing the USB Active
- * EP bit in the Device EP control register. Note: This function is not used
- * for EP0. EP0 cannot be deactivated.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to deactivate.
- */
-void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl = { .d32 = 0 };
-	volatile uint32_t *addr;
-	daint_data_t daintmsk = { .d32 = 0};
-
-	/* Read DEPCTLn register */
-	if (ep->is_in == 1) {
-		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-		daintmsk.ep.in = 1<<ep->num;
-	}
-	else {
-		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-		daintmsk.ep.out = 1<<ep->num;
-	}
-
-	//disabled ep only when ep is enabled
-	//or got halt in the loop in test in cv9
-	depctl.d32=dwc_read_reg32(addr);
-	if(depctl.b.epena){
-		if (ep->is_in == 1) {
-			diepint_data_t diepint;
-			dwc_otg_dev_in_ep_regs_t *in_reg=core_if->dev_if->in_ep_regs[ep->num];
-
-			//Set ep nak
-			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-			depctl.b.snak=1;
-			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-
-			//wait for diepint.b.inepnakeff
-			diepint.d32=dwc_read_reg32(&in_reg->diepint);
-			while(!diepint.b.inepnakeff){
-				udelay(1);
-				diepint.d32=dwc_read_reg32(&in_reg->diepint);
-			}
-			diepint.d32=0;
-			diepint.b.inepnakeff=1;
-			dwc_write_reg32(&in_reg->diepint,diepint.d32);
-
-			//set ep disable and snak
-			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-			depctl.b.snak=1;
-			depctl.b.epdis=1;
-			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-
-			//wait for diepint.b.epdisabled
-			diepint.d32=dwc_read_reg32(&in_reg->diepint);
-			while(!diepint.b.epdisabled){
-				udelay(1);
-				diepint.d32=dwc_read_reg32(&in_reg->diepint);
-			}
-			diepint.d32=0;
-			diepint.b.epdisabled=1;
-			dwc_write_reg32(&in_reg->diepint,diepint.d32);
-
-			//clear ep enable and disable bit
-			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-			depctl.b.epena=0;
-			depctl.b.epdis=0;
-			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-
-		}
-#if 0
-//following DWC OTG DataBook v2.72a, 6.4.2.1.3 Disabling an OUT Endpoint,
-//but this doesn't work, the old code do.
-		else {
-			doepint_data_t doepint;
-			dwc_otg_dev_out_ep_regs_t *out_reg=core_if->dev_if->out_ep_regs[ep->num];
-			dctl_data_t dctl;
-			gintsts_data_t gintsts;
-
-			//set dctl global out nak
-			dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
-			dctl.b.sgoutnak=1;
-			dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl,dctl.d32);
-
-			//wait for gintsts.goutnakeff
-			gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
-			while(!gintsts.b.goutnakeff){
-				udelay(1);
-				gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
-			}
-			gintsts.d32=0;
-			gintsts.b.goutnakeff=1;
-			dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-			//set ep disable and snak
-			depctl.d32=dwc_read_reg32(&out_reg->doepctl);
-			depctl.b.snak=1;
-			depctl.b.epdis=1;
-			dwc_write_reg32(&out_reg->doepctl,depctl.d32);
-
-			//wait for diepint.b.epdisabled
-			doepint.d32=dwc_read_reg32(&out_reg->doepint);
-			while(!doepint.b.epdisabled){
-				udelay(1);
-				doepint.d32=dwc_read_reg32(&out_reg->doepint);
-			}
-			doepint.d32=0;
-			doepint.b.epdisabled=1;
-			dwc_write_reg32(&out_reg->doepint,doepint.d32);
-
-			//clear ep enable and disable bit
-			depctl.d32=dwc_read_reg32(&out_reg->doepctl);
-			depctl.b.epena=0;
-			depctl.b.epdis=0;
-			dwc_write_reg32(&out_reg->doepctl,depctl.d32);
-		}
-#endif
-
-		depctl.d32=0;
-		depctl.b.usbactep = 0;
-
-		if (ep->is_in == 0) {
-			if(core_if->dma_enable||core_if->dma_desc_enable)
-				depctl.b.epdis = 1;
-		}
-
-		dwc_write_reg32(addr, depctl.d32);
-	}
-
-	/* Disable the Interrupt for this EP */
-	if(core_if->multiproc_int_enable) {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
-				 daintmsk.d32, 0);
-
-		if (ep->is_in == 1) {
-			dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
-		} else {
-			dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
-		}
-	} else {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
-					 daintmsk.d32, 0);
-	}
-
-	if (ep->is_in == 1) {
-		DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
-			(u32)&core_if->dev_if->in_ep_regs[ep->num]->diepctl,
-			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepctl),
-			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz),
-			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepint),
-			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepdma),
-			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts));
-		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-	}
-	else {
-		DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
-			(u32)&core_if->dev_if->out_ep_regs[ep->num]->doepctl,
-			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl),
-			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz),
-			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepint),
-			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepdma));
-
-		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-	}
-
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer.	 For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	dwc_otg_dma_desc_t* dma_desc;
-	uint32_t offset;
-	uint32_t xfer_est;
-	int i;
-
-	ep->desc_cnt = ( ep->total_len / ep->maxxfer)  +
-		((ep->total_len % ep->maxxfer) ? 1 : 0);
-	if(!ep->desc_cnt)
-		ep->desc_cnt = 1;
-
-	dma_desc = ep->desc_addr;
-	xfer_est = ep->total_len;
-	offset = 0;
-	for( i = 0; i < ep->desc_cnt; ++i) {
-		/** DMA Descriptor Setup */
-		if(xfer_est > ep->maxxfer) {
-			dma_desc->status.b.bs = BS_HOST_BUSY;
-			dma_desc->status.b.l = 0;
-			dma_desc->status.b.ioc = 0;
-			dma_desc->status.b.sp = 0;
-			dma_desc->status.b.bytes = ep->maxxfer;
-			dma_desc->buf = ep->dma_addr + offset;
-			dma_desc->status.b.bs = BS_HOST_READY;
-
-			xfer_est -= ep->maxxfer;
-			offset += ep->maxxfer;
-		} else {
-			dma_desc->status.b.bs = BS_HOST_BUSY;
-			dma_desc->status.b.l = 1;
-			dma_desc->status.b.ioc = 1;
-			if(ep->is_in) {
-				dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
-					1 : ((ep->sent_zlp) ? 1 : 0);
-				dma_desc->status.b.bytes = xfer_est;
-			} else 	{
-				dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
-			}
-
-			dma_desc->buf = ep->dma_addr + offset;
-			dma_desc->status.b.bs = BS_HOST_READY;
-		}
-		dma_desc ++;
-	}
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer.	 For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t 	depctl;
-	deptsiz_data_t	deptsiz;
-	gintmsk_data_t 	intr_mask = { .d32 = 0};
-
-	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-
-	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-		"xfer_buff=%p start_xfer_buff=%p\n",
-		ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-		ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-
-	/* IN endpoint */
-	if (ep->is_in == 1) {
-		dwc_otg_dev_in_ep_regs_t *in_regs =
-			core_if->dev_if->in_ep_regs[ep->num];
-
-		gnptxsts_data_t gtxstatus;
-
-		gtxstatus.d32 =
-			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-
-		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
-			DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-#endif
-			return;
-		}
-
-		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-
-		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-				ep->maxxfer : (ep->total_len - ep->xfer_len);
-
-		/* Zero Length Packet? */
-		if ((ep->xfer_len - ep->xfer_count) == 0) {
-			deptsiz.b.xfersize = 0;
-			deptsiz.b.pktcnt = 1;
-		}
-		else {
-			/* Program the transfer size and packet count
-			 *	as follows: xfersize = N * maxpacket +
-			 *	short_packet pktcnt = N + (short_packet
-			 *	exist ? 1 : 0)
-			 */
-			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-			deptsiz.b.pktcnt =
-				(ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
-				ep->maxpacket;
-		}
-
-
-		/* Write the DMA register */
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n", ep->num, ep->dma_addr);
-
-			if (core_if->dma_desc_enable == 0) {
-				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(in_regs->diepdma),
-						 (uint32_t)ep->dma_addr);
-			}
-			else {
-				init_dma_desc_chain(core_if, ep);
-				/** DIEPDMAn Register write */
-
-					VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
-					dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
-			}
-		}
-		else
-		{
-			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-			if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
-				/**
-				 * Enable the Non-Periodic Tx FIFO empty interrupt,
-				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-				 * the data will be written into the fifo by the ISR.
-				 */
-				if(core_if->en_multiple_tx_fifo == 0) {
-					intr_mask.b.nptxfempty = 1;
-					dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-						intr_mask.d32, intr_mask.d32);
-				}
-				else {
-					/* Enable the Tx FIFO Empty Interrupt for this EP */
-					if(ep->xfer_len > 0) {
-						uint32_t fifoemptymsk = 0;
-						fifoemptymsk = 1 << ep->num;
-						dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-						0, fifoemptymsk);
-
-					}
-				}
-			}
-		}
-
-		/* EP enable, IN data in FIFO */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
-		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-		depctl.b.nextep = ep->num;
-		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-
-		DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
-			(u32)&in_regs->diepctl,
-			dwc_read_reg32(&in_regs->diepctl),
-			dwc_read_reg32(&in_regs->dieptsiz),
-			dwc_read_reg32(&in_regs->diepint),
-			dwc_read_reg32(&in_regs->diepdma),
-			dwc_read_reg32(&in_regs->dtxfsts));
-		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-
-	}
-	else {
-		/* OUT endpoint */
-		dwc_otg_dev_out_ep_regs_t *out_regs =
-		core_if->dev_if->out_ep_regs[ep->num];
-
-		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-
-		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-				ep->maxxfer : (ep->total_len - ep->xfer_len);
-
-		/* Program the transfer size and packet count as follows:
-		 *
-		 *	pktcnt = N
-		 *	xfersize = N * maxpacket
-		 */
-		if ((ep->xfer_len - ep->xfer_count) == 0) {
-			/* Zero Length Packet */
-			deptsiz.b.xfersize = ep->maxpacket;
-			deptsiz.b.pktcnt = 1;
-		}
-		else {
-			deptsiz.b.pktcnt =
-					(ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
-					ep->maxpacket;
-			ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
-			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-		}
-
-		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
-			ep->num,
-			deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n",
-				ep->num,
-				ep->dma_addr);
-			if (!core_if->dma_desc_enable) {
-				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(out_regs->doepdma),
-					(uint32_t)ep->dma_addr);
-			}
-			else {
-				init_dma_desc_chain(core_if, ep);
-
-				/** DOEPDMAn Register write */
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
-				dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
-			}
-		}
-		else {
-			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-		}
-
-		/* EP enable */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-
-		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
-		DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
-			(u32)&out_regs->doepctl,
-			dwc_read_reg32(&out_regs->doepctl),
-			dwc_read_reg32(&out_regs->doeptsiz),
-			dwc_read_reg32(&out_regs->doepint),
-			dwc_read_reg32(&out_regs->doepdma));
-
-		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-	}
-}
-
-/**
- * This function setup a zero length transfer in Buffer DMA and
- * Slave modes for usb requests with zero field set
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-
- 	depctl_data_t depctl;
-	deptsiz_data_t deptsiz;
-	gintmsk_data_t intr_mask = { .d32 = 0};
-
-	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-
-	/* IN endpoint */
-	if (ep->is_in == 1) {
-		dwc_otg_dev_in_ep_regs_t *in_regs =
-			core_if->dev_if->in_ep_regs[ep->num];
-
-		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-
-		deptsiz.b.xfersize = 0;
-		deptsiz.b.pktcnt = 1;
-
-
-		/* Write the DMA register */
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			if (core_if->dma_desc_enable == 0) {
-				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(in_regs->diepdma),
-						 (uint32_t)ep->dma_addr);
-			}
-		}
-		else {
-			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-			/**
-			 * Enable the Non-Periodic Tx FIFO empty interrupt,
-			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-			 * the data will be written into the fifo by the ISR.
-			 */
-			if(core_if->en_multiple_tx_fifo == 0) {
-				intr_mask.b.nptxfempty = 1;
-				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-					intr_mask.d32, intr_mask.d32);
-			}
-			else {
-				/* Enable the Tx FIFO Empty Interrupt for this EP */
-				if(ep->xfer_len > 0) {
-					uint32_t fifoemptymsk = 0;
-					fifoemptymsk = 1 << ep->num;
-					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-					0, fifoemptymsk);
-				}
-			}
-		}
-
-		/* EP enable, IN data in FIFO */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
-		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-		depctl.b.nextep = ep->num;
-		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-
-	}
-	else {
-		/* OUT endpoint */
-		dwc_otg_dev_out_ep_regs_t *out_regs =
-		core_if->dev_if->out_ep_regs[ep->num];
-
-		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-
-		/* Zero Length Packet */
-		deptsiz.b.xfersize = ep->maxpacket;
-		deptsiz.b.pktcnt = 1;
-
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			if (!core_if->dma_desc_enable) {
-				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(out_regs->doepdma),
-					(uint32_t)ep->dma_addr);
-			}
-		}
-		else {
-			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-		}
-
-		/* EP enable */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-
-		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
-	}
-}
-
-/**
- * This function does the setup for a data transfer for EP0 and starts
- * the transfer.  For an IN transfer, the packets will be loaded into
- * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
- * unloaded from the Rx FIFO in the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl;
-	deptsiz0_data_t deptsiz;
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	dwc_otg_dma_desc_t* dma_desc;
-
-	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-	"xfer_buff=%p start_xfer_buff=%p, dma_addr=%.8x\n",
-	ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-	ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,ep->dma_addr);
-
-	ep->total_len = ep->xfer_len;
-
-	/* IN endpoint */
-	if (ep->is_in == 1) {
-		dwc_otg_dev_in_ep_regs_t *in_regs =
-		core_if->dev_if->in_ep_regs[0];
-
-		gnptxsts_data_t gtxstatus;
-
-		gtxstatus.d32 =
-			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-
-		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
-			deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-			DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
-				dwc_read_reg32(&in_regs->diepctl));
-			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
-				deptsiz.d32,
-				deptsiz.b.xfersize, deptsiz.b.pktcnt);
-			DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
-				  gtxstatus.d32);
-#endif
-			return;
-		}
-
-
-		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
-		/* Zero Length Packet? */
-		if (ep->xfer_len == 0) {
-			deptsiz.b.xfersize = 0;
-			deptsiz.b.pktcnt = 1;
-		}
-		else {
-			/* Program the transfer size and packet count
-			 *	as follows: xfersize = N * maxpacket +
-			 *	short_packet pktcnt = N + (short_packet
-			 *	exist ? 1 : 0)
-			 */
-			if (ep->xfer_len > ep->maxpacket) {
-				ep->xfer_len = ep->maxpacket;
-				deptsiz.b.xfersize = ep->maxpacket;
-			}
-			else {
-				deptsiz.b.xfersize = ep->xfer_len;
-			}
-			deptsiz.b.pktcnt = 1;
-
-		}
-		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
-			ep->xfer_len,
-			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-		/* Write the DMA register */
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			if(core_if->dma_desc_enable == 0) {
-				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(in_regs->diepdma),
-				(uint32_t)ep->dma_addr);
-			}
-			else {
-				dma_desc = core_if->dev_if->in_desc_addr;
-
-				/** DMA Descriptor Setup */
-				dma_desc->status.b.bs = BS_HOST_BUSY;
-				dma_desc->status.b.l = 1;
-				dma_desc->status.b.ioc = 1;
-				dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-				dma_desc->status.b.bytes = ep->xfer_len;
-				dma_desc->buf = ep->dma_addr;
-				dma_desc->status.b.bs = BS_HOST_READY;
-
-				/** DIEPDMA0 Register write */
-
-				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
-					dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-			}
-		}
-		else {
-			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-		}
-
-		/* EP enable, IN data in FIFO */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
-		/**
-		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
-		 * data will be written into the fifo by the ISR.
-		 */
-		if (!core_if->dma_enable) {
-			if(core_if->en_multiple_tx_fifo == 0) {
-				intr_mask.b.nptxfempty = 1;
-				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-					intr_mask.d32, intr_mask.d32);
-			}
-			else {
-				/* Enable the Tx FIFO Empty Interrupt for this EP */
-				if(ep->xfer_len > 0) {
-					uint32_t fifoemptymsk = 0;
-					fifoemptymsk |= 1 << ep->num;
-					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-						0, fifoemptymsk);
-				}
-			}
-		}
-	}
-	else {
-		/* OUT endpoint */
-		dwc_otg_dev_out_ep_regs_t *out_regs =
-			core_if->dev_if->out_ep_regs[0];
-
-		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-
-		/* Program the transfer size and packet count as follows:
-		 *	xfersize = N * (maxpacket + 4 - (maxpacket % 4))
-		 *	pktcnt = N											*/
-		/* Zero Length Packet */
-		deptsiz.b.xfersize = ep->maxpacket;
-		deptsiz.b.pktcnt = 1;
-
-		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
-			ep->xfer_len,
-			deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
-		if (core_if->dma_enable) {
-			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-			}
-			if(!core_if->dma_desc_enable) {
-				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(out_regs->doepdma),
-				 (uint32_t)ep->dma_addr);
-			}
-			else {
-				dma_desc = core_if->dev_if->out_desc_addr;
-
-				/** DMA Descriptor Setup */
-				dma_desc->status.b.bs = BS_HOST_BUSY;
-				dma_desc->status.b.l = 1;
-				dma_desc->status.b.ioc = 1;
-				dma_desc->status.b.bytes = ep->maxpacket;
-				dma_desc->buf = ep->dma_addr;
-				dma_desc->status.b.bs = BS_HOST_READY;
-
-			/** DOEPDMA0 Register write */
-				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
-				dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-			}
-		}
-		else {
-			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-		}
-
-		/* EP enable */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
-	}
-}
-
-/**
- * This function continues control IN transfers started by
- * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
- * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
- * bit for the packet count.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl;
-	deptsiz0_data_t deptsiz;
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	dwc_otg_dma_desc_t* dma_desc;
-
-	if (ep->is_in == 1) {
-		dwc_otg_dev_in_ep_regs_t *in_regs =
-			core_if->dev_if->in_ep_regs[0];
-		gnptxsts_data_t tx_status = { .d32 = 0 };
-
-		tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-		/** @todo Should there be check for room in the Tx
-		 * Status Queue.  If not remove the code above this comment. */
-
-		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
-		/* Program the transfer size and packet count
-		 *	as follows: xfersize = N * maxpacket +
-		 *	short_packet pktcnt = N + (short_packet
-		 *	exist ? 1 : 0)
-		 */
-
-
-		if(core_if->dma_desc_enable == 0) {
-			deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-					(ep->total_len - ep->xfer_count);
-			deptsiz.b.pktcnt = 1;
-			if(core_if->dma_enable == 0) {
-				ep->xfer_len += deptsiz.b.xfersize;
-			} else {
-				ep->xfer_len = deptsiz.b.xfersize;
-			}
-			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-		}
-		else {
-			ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-				(ep->total_len - ep->xfer_count);
-
-			dma_desc = core_if->dev_if->in_desc_addr;
-
-			/** DMA Descriptor Setup */
-			dma_desc->status.b.bs = BS_HOST_BUSY;
-			dma_desc->status.b.l = 1;
-			dma_desc->status.b.ioc = 1;
-			dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-			dma_desc->status.b.bytes = ep->xfer_len;
-			dma_desc->buf = ep->dma_addr;
-			dma_desc->status.b.bs = BS_HOST_READY;
-
-
-			/** DIEPDMA0 Register write */
-				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
-				dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-		}
-
-
-		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
-			ep->xfer_len,
-			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
-		/* Write the DMA register */
-		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-			if(core_if->dma_desc_enable == 0){
-
-					VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-					dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
-			}
-		}
-
-		/* EP enable, IN data in FIFO */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
-		/**
-		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
-		 * data will be written into the fifo by the ISR.
-		 */
-		if (!core_if->dma_enable) {
-			if(core_if->en_multiple_tx_fifo == 0) {
-				/* First clear it from GINTSTS */
-				intr_mask.b.nptxfempty = 1;
-				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-					intr_mask.d32, intr_mask.d32);
-
-			}
-			else {
-				/* Enable the Tx FIFO Empty Interrupt for this EP */
-				if(ep->xfer_len > 0) {
-					uint32_t fifoemptymsk = 0;
-					fifoemptymsk |= 1 << ep->num;
-					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-						0, fifoemptymsk);
-				}
-			}
-		}
-	}
-	else {
-		dwc_otg_dev_out_ep_regs_t *out_regs =
-			core_if->dev_if->out_ep_regs[0];
-
-
-		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-
-		/* Program the transfer size and packet count
-		 *	as follows: xfersize = N * maxpacket +
-		 *	short_packet pktcnt = N + (short_packet
-		 *	exist ? 1 : 0)
-		 */
-		deptsiz.b.xfersize = ep->maxpacket;
-		deptsiz.b.pktcnt = 1;
-
-
-		if(core_if->dma_desc_enable == 0) {
-			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-		}
-		else {
-			dma_desc = core_if->dev_if->out_desc_addr;
-
-			/** DMA Descriptor Setup */
-			dma_desc->status.b.bs = BS_HOST_BUSY;
-			dma_desc->status.b.l = 1;
-			dma_desc->status.b.ioc = 1;
-			dma_desc->status.b.bytes = ep->maxpacket;
-			dma_desc->buf = ep->dma_addr;
-			dma_desc->status.b.bs = BS_HOST_READY;
-
-			/** DOEPDMA0 Register write */
-			VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
-			dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-		}
-
-
-		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
-			ep->xfer_len,
-			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
-		/* Write the DMA register */
-		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-			if(core_if->dma_desc_enable == 0){
-
-				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-				dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
-			}
-		}
-
-		/* EP enable, IN data in FIFO */
-		depctl.b.cnak = 1;
-		depctl.b.epena = 1;
-		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
-	}
-}
-
-#ifdef DEBUG
-void dump_msg(const u8 *buf, unsigned int length)
-{
-	unsigned int	start, num, i;
-	char		line[52], *p;
-
-	if (length >= 512)
-		return;
-	start = 0;
-	while (length > 0) {
-		num = min(length, 16u);
-		p = line;
-		for (i = 0; i < num; ++i)
-		{
-			if (i == 8)
-				*p++ = ' ';
-			sprintf(p, " %02x", buf[i]);
-			p += 3;
-		}
-		*p = 0;
-		DWC_PRINT("%6x: %s\n", start, line);
-		buf += num;
-		start += num;
-		length -= num;
-	}
-}
-#else
-static inline void dump_msg(const u8 *buf, unsigned int length)
-{
-}
-#endif
-
-/**
- * This function writes a packet into the Tx FIFO associated with the
- * EP.	For non-periodic EPs the non-periodic Tx FIFO is written.  For
- * periodic EPs the periodic Tx FIFO associated with the EP is written
- * with all packets for the next micro-frame.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to write packet for.
- * @param dma Indicates if DMA is being used.
- */
-void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
-{
-	/**
-	 * The buffer is padded to DWORD on a per packet basis in
-	 * slave/dma mode if the MPS is not DWORD aligned.	The last
-	 * packet, if short, is also padded to a multiple of DWORD.
-	 *
-	 * ep->xfer_buff always starts DWORD aligned in memory and is a
-	 * multiple of DWORD in length
-	 *
-	 * ep->xfer_len can be any number of bytes
-	 *
-	 * ep->xfer_count is a multiple of ep->maxpacket until the last
-	 *	packet
-	 *
-	 * FIFO access is DWORD */
-
-	uint32_t i;
-	uint32_t byte_count;
-	uint32_t dword_count;
-	uint32_t *fifo;
-	uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
-
-	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
-	if (ep->xfer_count >= ep->xfer_len) {
-			DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
-			return;
-	}
-
-	/* Find the byte length of the packet either short packet or MPS */
-	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
-		byte_count = ep->xfer_len - ep->xfer_count;
-	}
-	else {
-		byte_count = ep->maxpacket;
-	}
-
-	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
-	 * is not a multiple of DWORD */
-	dword_count =  (byte_count + 3) / 4;
-
-#ifdef VERBOSE
-	dump_msg(ep->xfer_buff, byte_count);
-#endif
-
-	/**@todo NGS Where are the Periodic Tx FIFO addresses
-	 * intialized?	What should this be? */
-
-	fifo = core_if->data_fifo[ep->num];
-
-
-	DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
-
-	if (!dma) {
-		for (i=0; i<dword_count; i++, data_buff++) {
-			dwc_write_reg32(fifo, *data_buff);
-		}
-	}
-
-	ep->xfer_count += byte_count;
-	ep->xfer_buff += byte_count;
-	ep->dma_addr += byte_count;
-}
-
-/**
- * Set the EP STALL.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to set the stall on.
- */
-void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl;
-	volatile uint32_t *depctl_addr;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s ep%d-%s1\n", __func__, ep->num,
-		(ep->is_in?"IN":"OUT"));
-
-	DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
-		(ep->is_in?"in":"out"));
-
-	if (ep->is_in == 1) {
-		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-		depctl.d32 = dwc_read_reg32(depctl_addr);
-
-		/* set the disable and stall bits */
-#if 0
-//epdis is set here but not cleared at latter dwc_otg_ep_clear_stall,
-//which cause the testusb item 13 failed(Host:pc, device: otg device)
-		if (depctl.b.epena) {
-			depctl.b.epdis = 1;
-		}
-#endif
-		depctl.b.stall = 1;
-		dwc_write_reg32(depctl_addr, depctl.d32);
-	}
-	else {
-		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-		depctl.d32 = dwc_read_reg32(depctl_addr);
-
-		/* set the stall bit */
-		depctl.b.stall = 1;
-		dwc_write_reg32(depctl_addr, depctl.d32);
-	}
-
-	DWC_DEBUGPL(DBG_PCDV,"%s: DEPCTL(%.8x)=%0x\n",__func__,(u32)depctl_addr,dwc_read_reg32(depctl_addr));
-
-	return;
-}
-
-/**
- * Clear the EP STALL.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to clear stall from.
- */
-void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl;
-	volatile uint32_t *depctl_addr;
-
-	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-		(ep->is_in?"IN":"OUT"));
-
-	if (ep->is_in == 1) {
-		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-	}
-	else {
-		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-	}
-
-	depctl.d32 = dwc_read_reg32(depctl_addr);
-
-	/* clear the stall bits */
-	depctl.b.stall = 0;
-
-	/*
-	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
-	 * of whether an endpoint has the Halt feature set, a
-	 * ClearFeature(ENDPOINT_HALT) request always results in the
-	 * data toggle being reinitialized to DATA0.
-	 */
-	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
-		ep->type == DWC_OTG_EP_TYPE_BULK) {
-		depctl.b.setd0pid = 1; /* DATA0 */
-	}
-
-	dwc_write_reg32(depctl_addr, depctl.d32);
-	DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-	return;
-}
-
-/**
- * This function reads a packet from the Rx FIFO into the destination
- * buffer.	To read SETUP data use dwc_otg_read_setup_packet.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dest	  Destination buffer for the packet.
- * @param bytes  Number of bytes to copy to the destination.
- */
-void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-			 uint8_t *dest,
-			 uint16_t bytes)
-{
-	int i;
-	int word_count = (bytes + 3) / 4;
-
-	volatile uint32_t *fifo = core_if->data_fifo[0];
-	uint32_t *data_buff = (uint32_t *)dest;
-
-	/**
-	 * @todo Account for the case where _dest is not dword aligned. This
-	 * requires reading data from the FIFO into a uint32_t temp buffer,
-	 * then moving it into the data buffer.
-	 */
-
-	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
-					core_if, dest, bytes);
-
-	for (i=0; i<word_count; i++, data_buff++)
-	{
-		*data_buff = dwc_read_reg32(fifo);
-	}
-
-	return;
-}
-
-
-
-/**
- * This functions reads the device registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
-{
-	int i;
-	volatile uint32_t *addr;
-
-	DWC_PRINT("Device Global Registers\n");
-	addr=&core_if->dev_if->dev_global_regs->dcfg;
-	DWC_PRINT("DCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->dctl;
-	DWC_PRINT("DCTL          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->dsts;
-	DWC_PRINT("DSTS          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->diepmsk;
-	DWC_PRINT("DIEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->doepmsk;
-	DWC_PRINT("DOEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->daint;
-	DWC_PRINT("DAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->daintmsk;
-	DWC_PRINT("DAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->dtknqr1;
-	DWC_PRINT("DTKNQR1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
-		addr=&core_if->dev_if->dev_global_regs->dtknqr2;
-		DWC_PRINT("DTKNQR2       @0x%08X : 0x%08X\n",
-		  (uint32_t)addr,dwc_read_reg32(addr));
-	}
-
-	addr=&core_if->dev_if->dev_global_regs->dvbusdis;
-	DWC_PRINT("DVBUSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-	addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
-	DWC_PRINT("DVBUSPULSE    @0x%08X : 0x%08X\n",
-				  (uint32_t)addr,dwc_read_reg32(addr));
-
-	if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
-		addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
-		DWC_PRINT("DTKNQR3_DTHRCTL       @0x%08X : 0x%08X\n",
-		  (uint32_t)addr, dwc_read_reg32(addr));
-	}
-/*
-	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
-		addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-		DWC_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n",
-				  (uint32_t)addr, dwc_read_reg32(addr));
-	}
-*/
-	addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-	DWC_PRINT("FIFOEMPMSK    @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
-
-	addr=&core_if->dev_if->dev_global_regs->deachint;
-	DWC_PRINT("DEACHINT      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->dev_if->dev_global_regs->deachintmsk;
-	DWC_PRINT("DEACHINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-		addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
-		DWC_PRINT("DIEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-	}
-
-
-	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-		addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
-		DWC_PRINT("DOEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-	}
-
-	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-		DWC_PRINT("Device IN EP %d Registers\n", i);
-		addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
-		DWC_PRINT("DIEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->in_ep_regs[i]->diepint;
-		DWC_PRINT("DIEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
-		DWC_PRINT("DIETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
-		DWC_PRINT("DIEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
-		DWC_PRINT("DTXFSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		//reading depdmab in non desc dma mode would halt the ahb bus...
-		if(core_if->dma_desc_enable){
-			addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
-			DWC_PRINT("DIEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		}
-	}
-
-
-	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-		DWC_PRINT("Device OUT EP %d Registers\n", i);
-		addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
-		DWC_PRINT("DOEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
-		DWC_PRINT("DOEPFN        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->out_ep_regs[i]->doepint;
-		DWC_PRINT("DOEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
-		DWC_PRINT("DOETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
-		DWC_PRINT("DOEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-		//reading depdmab in non desc dma mode would halt the ahb bus...
-		if(core_if->dma_desc_enable){
-			addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
-			DWC_PRINT("DOEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		}
-
-	}
-
-
-
-	return;
-}
-
-/**
- * This functions reads the SPRAM and prints its content
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
-{
-	volatile uint8_t *addr, *start_addr, *end_addr;
-
-	DWC_PRINT("SPRAM Data:\n");
-	start_addr = (void*)core_if->core_global_regs;
-	DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
-	start_addr += 0x00028000;
-	end_addr=(void*)core_if->core_global_regs;
-	end_addr += 0x000280e0;
-
-	for(addr = start_addr; addr < end_addr; addr+=16)
-	{
-		DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
-			addr[0],
-			addr[1],
-			addr[2],
-			addr[3],
-			addr[4],
-			addr[5],
-			addr[6],
-			addr[7],
-			addr[8],
-			addr[9],
-			addr[10],
-			addr[11],
-			addr[12],
-			addr[13],
-			addr[14],
-			addr[15]
-			);
-	}
-
-	return;
-}
-/**
- * This function reads the host registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
-{
-	int i;
-	volatile uint32_t *addr;
-
-	DWC_PRINT("Host Global Registers\n");
-	addr=&core_if->host_if->host_global_regs->hcfg;
-	DWC_PRINT("HCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->host_if->host_global_regs->hfir;
-	DWC_PRINT("HFIR          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->host_if->host_global_regs->hfnum;
-	DWC_PRINT("HFNUM         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->host_if->host_global_regs->hptxsts;
-	DWC_PRINT("HPTXSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->host_if->host_global_regs->haint;
-	DWC_PRINT("HAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->host_if->host_global_regs->haintmsk;
-	DWC_PRINT("HAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=core_if->host_if->hprt0;
-	DWC_PRINT("HPRT0         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-	for (i=0; i<core_if->core_params->host_channels; i++)
-	{
-		DWC_PRINT("Host Channel %d Specific Registers\n", i);
-		addr=&core_if->host_if->hc_regs[i]->hcchar;
-		DWC_PRINT("HCCHAR        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->host_if->hc_regs[i]->hcsplt;
-		DWC_PRINT("HCSPLT        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->host_if->hc_regs[i]->hcint;
-		DWC_PRINT("HCINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->host_if->hc_regs[i]->hcintmsk;
-		DWC_PRINT("HCINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->host_if->hc_regs[i]->hctsiz;
-		DWC_PRINT("HCTSIZ        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-		addr=&core_if->host_if->hc_regs[i]->hcdma;
-		DWC_PRINT("HCDMA         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	}
-	return;
-}
-
-/**
- * This function reads the core global registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
-{
-	int i,size;
-	char* str;
-	volatile uint32_t *addr;
-
-	DWC_PRINT("Core Global Registers\n");
-	addr=&core_if->core_global_regs->gotgctl;
-	DWC_PRINT("GOTGCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gotgint;
-	DWC_PRINT("GOTGINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gahbcfg;
-	DWC_PRINT("GAHBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gusbcfg;
-	DWC_PRINT("GUSBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->grstctl;
-	DWC_PRINT("GRSTCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gintsts;
-	DWC_PRINT("GINTSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gintmsk;
-	DWC_PRINT("GINTMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->grxstsr;
-	DWC_PRINT("GRXSTSR       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	//addr=&core_if->core_global_regs->grxstsp;
-	//DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->grxfsiz;
-	DWC_PRINT("GRXFSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gnptxfsiz;
-	DWC_PRINT("GNPTXFSIZ     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gnptxsts;
-	DWC_PRINT("GNPTXSTS      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gi2cctl;
-	DWC_PRINT("GI2CCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gpvndctl;
-	DWC_PRINT("GPVNDCTL      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->ggpio;
-	DWC_PRINT("GGPIO         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->guid;
-	DWC_PRINT("GUID          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->gsnpsid;
-	DWC_PRINT("GSNPSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->ghwcfg1;
-	DWC_PRINT("GHWCFG1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->ghwcfg2;
-	DWC_PRINT("GHWCFG2       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->ghwcfg3;
-	DWC_PRINT("GHWCFG3       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->ghwcfg4;
-	DWC_PRINT("GHWCFG4       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-	addr=&core_if->core_global_regs->hptxfsiz;
-	DWC_PRINT("HPTXFSIZ      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-	size=(core_if->hwcfg4.b.ded_fifo_en)?
-		core_if->hwcfg4.b.num_in_eps:core_if->hwcfg4.b.num_dev_perio_in_ep;
-	str=(core_if->hwcfg4.b.ded_fifo_en)?"DIEPTXF":"DPTXFSIZ";
-	for (i=0; i<size; i++)
-	{
-		addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
-		DWC_PRINT("%s[%d]        @0x%08X : 0x%08X\n",str,i,(uint32_t)addr,dwc_read_reg32(addr));
-	}
-}
-
-/**
- * Flush a Tx FIFO.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param num Tx FIFO to flush.
- */
-void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
-					   const int num)
-{
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	volatile grstctl_t greset = { .d32 = 0};
-	int count = 0;
-
-	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
-
-	greset.b.txfflsh = 1;
-	greset.b.txfnum = num;
-	dwc_write_reg32(&global_regs->grstctl, greset.d32);
-
-	do {
-		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-		if (++count > 10000) {
-			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-					  __func__, greset.d32,
-			dwc_read_reg32(&global_regs->gnptxsts));
-			break;
-		}
-		udelay(1);
-	}
-	while (greset.b.txfflsh == 1);
-
-	/* Wait for 3 PHY Clocks*/
-	UDELAY(1);
-}
-
-/**
- * Flush Rx FIFO.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	volatile grstctl_t greset = { .d32 = 0};
-	int count = 0;
-
-	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-	/*
-	 *
-	 */
-	greset.b.rxfflsh = 1;
-	dwc_write_reg32(&global_regs->grstctl, greset.d32);
-
-	do {
-		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-		if (++count > 10000) {
-			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
-				greset.d32);
-			break;
-		}
-		udelay(1);
-	}
-	while (greset.b.rxfflsh == 1);
-
-	/* Wait for 3 PHY Clocks*/
-	UDELAY(1);
-}
-
-/**
- * Do core a soft reset of the core.  Be careful with this because it
- * resets all the internal state machines of the core.
- */
-void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	volatile grstctl_t greset = { .d32 = 0};
-	int count = 0;
-
-	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
-	/* Wait for AHB master IDLE state. */
-	do {
-		UDELAY(10);
-		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-		if (++count > 100000) {
-			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
-				greset.d32);
-			return;
-		}
-	}
-	while (greset.b.ahbidle == 0);
-
-	/* Core Soft Reset */
-	count = 0;
-	greset.b.csftrst = 1;
-	dwc_write_reg32(&global_regs->grstctl, greset.d32);
-	do {
-		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-		if (++count > 10000) {
-			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
-				greset.d32);
-			break;
-		}
-		udelay(1);
-	}
-	while (greset.b.csftrst == 1);
-
-	/* Wait for 3 PHY Clocks*/
-	MDELAY(100);
-
-	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-
-}
-
-
-
-/**
- * Register HCD callbacks.	The callbacks are used to start and stop
- * the HCD for interrupt processing.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param cb the HCD callback structure.
- * @param p pointer to be passed to callback function (usb_hcd*).
- */
-void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
-						dwc_otg_cil_callbacks_t *cb,
-						void *p)
-{
-	core_if->hcd_cb = cb;
-	cb->p = p;
-}
-
-/**
- * Register PCD callbacks.	The callbacks are used to start and stop
- * the PCD for interrupt processing.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param cb the PCD callback structure.
- * @param p pointer to be passed to callback function (pcd*).
- */
-void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
-						dwc_otg_cil_callbacks_t *cb,
-						void *p)
-{
-	core_if->pcd_cb = cb;
-	cb->p = p;
-}
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function writes isoc data per 1 (micro)frame into tx fifo
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	dwc_otg_dev_in_ep_regs_t *ep_regs;
-	dtxfsts_data_t txstatus = {.d32 = 0};
-	uint32_t len = 0;
-	uint32_t dwords;
-
-	ep->xfer_len = ep->data_per_frame;
-	ep->xfer_count = 0;
-
-	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
-
-	len = ep->xfer_len - ep->xfer_count;
-
-	if (len > ep->maxpacket) {
-		len = ep->maxpacket;
-	}
-
-	dwords = (len + 3)/4;
-
-	/* While there is space in the queue and space in the FIFO and
-	 * More data to tranfer, Write packets to the Tx FIFO */
-	txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
-
-	while  (txstatus.b.txfspcavail > dwords &&
-		ep->xfer_count < ep->xfer_len &&
-		ep->xfer_len != 0) {
-		/* Write the FIFO */
-		dwc_otg_ep_write_packet(core_if, ep, 0);
-
-		len = ep->xfer_len - ep->xfer_count;
-		if (len > ep->maxpacket) {
-			len = ep->maxpacket;
-		}
-
-		dwords = (len + 3)/4;
-		txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
-	}
-}
-
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	deptsiz_data_t		deptsiz = { .d32 = 0 };
-	depctl_data_t 		depctl = { .d32 = 0 };
-	dsts_data_t		dsts = { .d32 = 0 };
-	volatile uint32_t 	*addr;
-
-	if(ep->is_in) {
-		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-	} else {
-		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-	}
-
-	ep->xfer_len = ep->data_per_frame;
-	ep->xfer_count = 0;
-	ep->xfer_buff = ep->cur_pkt_addr;
-	ep->dma_addr = ep->cur_pkt_dma_addr;
-
-	if(ep->is_in) {
-		/* Program the transfer size and packet count
-		 *	as follows: xfersize = N * maxpacket +
-		 *	short_packet pktcnt = N + (short_packet
-		 *	exist ? 1 : 0)
-		 */
-		deptsiz.b.xfersize = ep->xfer_len;
-		deptsiz.b.pktcnt =
-			(ep->xfer_len - 1 + ep->maxpacket) /
-			ep->maxpacket;
-		deptsiz.b.mc = deptsiz.b.pktcnt;
-		dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-
-		/* Write the DMA register */
-		if (core_if->dma_enable) {
-			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-		}
-	} else {
-		deptsiz.b.pktcnt =
-				(ep->xfer_len + (ep->maxpacket - 1)) /
-				ep->maxpacket;
-		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-
-		dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-
-		if (core_if->dma_enable) {
-				dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
-					(uint32_t)ep->dma_addr);
-		}
-	}
-
-
-	/** Enable endpoint, clear nak  */
-
-	depctl.d32 = 0;
-	if(ep->bInterval == 1) {
-		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-		ep->next_frame = dsts.b.soffn + ep->bInterval;
-
-		if(ep->next_frame & 0x1) {
-			depctl.b.setd1pid = 1;
-		} else {
-			depctl.b.setd0pid = 1;
-		}
-	} else {
-		ep->next_frame += ep->bInterval;
-
-		if(ep->next_frame & 0x1) {
-			depctl.b.setd1pid = 1;
-		} else {
-			depctl.b.setd0pid = 1;
-		}
-	}
-	depctl.b.epena = 1;
-	depctl.b.cnak = 1;
-
-	dwc_modify_reg32(addr, 0, depctl.d32);
-	depctl.d32 = dwc_read_reg32(addr);
-
-	if(ep->is_in && core_if->dma_enable == 0) {
-		write_isoc_frame_data(core_if, ep);
-	}
-
-}
-
-#endif //DWC_EN_ISOC
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.h
deleted file mode 100644
index d1a4993..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.h
+++ /dev/null
@@ -1,1108 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
- * $Revision: #91 $
- * $Date: 2008/09/19 $
- * $Change: 1099526 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_CIL_H__)
-#define __DWC_CIL_H__
-
-#include <linux/workqueue.h>
-#include <linux/version.h>
-#include <asm/param.h>
-//#include <asm/arch/regs-irq.h>
-
-#include "otg_plat.h"
-#include "otg_regs.h"
-#ifdef DEBUG
-#include "linux/timer.h"
-#endif
-
-struct dwc_otg_hcd;
-
-/**
- * @file
- * This file contains the interface to the Core Interface Layer.
- */
-
-
-/** Macros defined for DWC OTG HW Release verison */
-#define OTG_CORE_REV_2_00	0x4F542000
-#define OTG_CORE_REV_2_60a	0x4F54260A
-#define OTG_CORE_REV_2_71a	0x4F54271A
-#define OTG_CORE_REV_2_72a	0x4F54272A
-
-/**
-*/
-typedef struct iso_pkt_info
-{
-	uint32_t	offset;
-	uint32_t 	length;
-	int32_t 	status;
-} iso_pkt_info_t;
-/**
- * The <code>dwc_ep</code> structure represents the state of a single
- * endpoint when acting in device mode. It contains the data items
- * needed for an endpoint to be activated and transfer packets.
- */
-typedef struct dwc_ep
-{
-	/** EP number used for register address lookup */
-	uint8_t	 num;
-	/** EP direction 0 = OUT */
-	unsigned is_in : 1;
-	/** EP active. */
-	unsigned active : 1;
-
-	/** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
-		If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
-	unsigned tx_fifo_num : 4;
-	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
-	unsigned type : 2;
-#define DWC_OTG_EP_TYPE_CONTROL	   0
-#define DWC_OTG_EP_TYPE_ISOC	   1
-#define DWC_OTG_EP_TYPE_BULK	   2
-#define DWC_OTG_EP_TYPE_INTR	   3
-
-	/** DATA start PID for INTR and BULK EP */
-	unsigned data_pid_start : 1;
-	/** Frame (even/odd) for ISOC EP */
-	unsigned even_odd_frame : 1;
-	/** Max Packet bytes */
-	unsigned maxpacket : 11;
-
-	/** Max Transfer size */
-	unsigned maxxfer : 16;
-
-	/** @name Transfer state */
-	/** @{ */
-
-	/**
-	 * Pointer to the beginning of the transfer buffer -- do not modify
-	 * during transfer.
-	 */
-
-	uint32_t dma_addr;
-
-	uint32_t dma_desc_addr;
-	dwc_otg_dma_desc_t* desc_addr;
-
-
-	uint8_t *start_xfer_buff;
-	/** pointer to the transfer buffer */
-	uint8_t *xfer_buff;
-	/** Number of bytes to transfer */
-	unsigned xfer_len : 19;
-	/** Number of bytes transferred. */
-	unsigned xfer_count : 19;
-	/** Sent ZLP */
-	unsigned sent_zlp : 1;
-	/** Total len for control transfer */
-	unsigned total_len : 19;
-
-	/** stall clear flag */
-	unsigned stall_clear_flag : 1;
-
-	/** Allocated DMA Desc count */
-	uint32_t 	desc_cnt;
-
-	uint32_t aligned_dma_addr;
-	uint32_t aligned_buf_size;
-	uint8_t *aligned_buf;
-
-
-#ifdef DWC_EN_ISOC
-	/**
-	 * Variables specific for ISOC EPs
-	 *
-	 */
-	/** DMA addresses of ISOC buffers */
-	uint32_t 	dma_addr0;
-	uint32_t	dma_addr1;
-
-	uint32_t 	iso_dma_desc_addr;
-	dwc_otg_dma_desc_t* iso_desc_addr;
-
-	/** pointer to the transfer buffers */
-	uint8_t		*xfer_buff0;
-	uint8_t		*xfer_buff1;
-
-	/** number of ISOC Buffer is processing */
-	uint32_t 	proc_buf_num;
-	/** Interval of ISOC Buffer processing */
-	uint32_t 	buf_proc_intrvl;
-	/** Data size for regular frame */
-	uint32_t 	data_per_frame;
-
-	/* todo - pattern data support is to be implemented in the future */
-	/** Data size for pattern frame */
-	uint32_t 	data_pattern_frame;
-	/** Frame number of pattern data */
-	uint32_t 	sync_frame;
-
-	/** bInterval */
-	uint32_t 	bInterval;
-	/** ISO Packet number per frame */
-	uint32_t 	pkt_per_frm;
-	/** Next frame num for which will be setup DMA Desc */
-	uint32_t 	next_frame;
-	/** Number of packets per buffer processing */
-	uint32_t	pkt_cnt;
-	/** Info for all isoc packets */
-	iso_pkt_info_t	*pkt_info;
-	/** current pkt number */
-	uint32_t	cur_pkt;
-	/** current pkt number */
-	uint8_t 	*cur_pkt_addr;
-	/** current pkt number */
-	uint32_t	cur_pkt_dma_addr;
-#endif //DWC_EN_ISOC
-/** @} */
-} dwc_ep_t;
-
-/*
- * Reasons for halting a host channel.
- */
-typedef enum dwc_otg_halt_status
-{
-	DWC_OTG_HC_XFER_NO_HALT_STATUS,
-	DWC_OTG_HC_XFER_COMPLETE,
-	DWC_OTG_HC_XFER_URB_COMPLETE,
-	DWC_OTG_HC_XFER_ACK,
-	DWC_OTG_HC_XFER_NAK,
-	DWC_OTG_HC_XFER_NYET,
-	DWC_OTG_HC_XFER_STALL,
-	DWC_OTG_HC_XFER_XACT_ERR,
-	DWC_OTG_HC_XFER_FRAME_OVERRUN,
-	DWC_OTG_HC_XFER_BABBLE_ERR,
-	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
-	DWC_OTG_HC_XFER_AHB_ERR,
-	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
-	DWC_OTG_HC_XFER_URB_DEQUEUE
-} dwc_otg_halt_status_e;
-
-/**
- * Host channel descriptor. This structure represents the state of a single
- * host channel when acting in host mode. It contains the data items needed to
- * transfer packets to an endpoint via a host channel.
- */
-typedef struct dwc_hc
-{
-	/** Host channel number used for register address lookup */
-	uint8_t	 hc_num;
-
-	/** Device to access */
-	unsigned dev_addr : 7;
-
-	/** EP to access */
-	unsigned ep_num : 4;
-
-	/** EP direction. 0: OUT, 1: IN */
-	unsigned ep_is_in : 1;
-
-	/**
-	 * EP speed.
-	 * One of the following values:
-	 *	- DWC_OTG_EP_SPEED_LOW
-	 *	- DWC_OTG_EP_SPEED_FULL
-	 *	- DWC_OTG_EP_SPEED_HIGH
-	 */
-	unsigned speed : 2;
-#define DWC_OTG_EP_SPEED_LOW	0
-#define DWC_OTG_EP_SPEED_FULL	1
-#define DWC_OTG_EP_SPEED_HIGH	2
-
-	/**
-	 * Endpoint type.
-	 * One of the following values:
-	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
-	 *	- DWC_OTG_EP_TYPE_ISOC: 1
-	 *	- DWC_OTG_EP_TYPE_BULK: 2
-	 *	- DWC_OTG_EP_TYPE_INTR: 3
-	 */
-	unsigned ep_type : 2;
-
-	/** Max packet size in bytes */
-	unsigned max_packet : 11;
-
-	/**
-	 * PID for initial transaction.
-	 * 0: DATA0,<br>
-	 * 1: DATA2,<br>
-	 * 2: DATA1,<br>
-	 * 3: MDATA (non-Control EP),
-	 *	  SETUP (Control EP)
-	 */
-	unsigned data_pid_start : 2;
-#define DWC_OTG_HC_PID_DATA0 0
-#define DWC_OTG_HC_PID_DATA2 1
-#define DWC_OTG_HC_PID_DATA1 2
-#define DWC_OTG_HC_PID_MDATA 3
-#define DWC_OTG_HC_PID_SETUP 3
-
-	/** Number of periodic transactions per (micro)frame */
-	unsigned multi_count: 2;
-
-	/** @name Transfer State */
-	/** @{ */
-
-	/** Pointer to the current transfer buffer position. */
-	uint8_t *xfer_buff;
-	/** Total number of bytes to transfer. */
-	uint32_t xfer_len;
-	/** Number of bytes transferred so far. */
-	uint32_t xfer_count;
-	/** Packet count at start of transfer.*/
-	uint16_t start_pkt_count;
-
-	/**
-	 * Flag to indicate whether the transfer has been started. Set to 1 if
-	 * it has been started, 0 otherwise.
-	 */
-	uint8_t xfer_started;
-
-	/**
-	 * Set to 1 to indicate that a PING request should be issued on this
-	 * channel. If 0, process normally.
-	 */
-	uint8_t do_ping;
-
-	/**
-	 * Set to 1 to indicate that the error count for this transaction is
-	 * non-zero. Set to 0 if the error count is 0.
-	 */
-	uint8_t error_state;
-
-	/**
-	 * Set to 1 to indicate that this channel should be halted the next
-	 * time a request is queued for the channel. This is necessary in
-	 * slave mode if no request queue space is available when an attempt
-	 * is made to halt the channel.
-	 */
-	uint8_t halt_on_queue;
-
-	/**
-	 * Set to 1 if the host channel has been halted, but the core is not
-	 * finished flushing queued requests. Otherwise 0.
-	 */
-	uint8_t halt_pending;
-
-	/**
-	 * Reason for halting the host channel.
-	 */
-	dwc_otg_halt_status_e	halt_status;
-
-	/*
-	 * Split settings for the host channel
-	 */
-	uint8_t do_split;		   /**< Enable split for the channel */
-	uint8_t complete_split;	   /**< Enable complete split */
-	uint8_t hub_addr;		   /**< Address of high speed hub */
-
-	uint8_t port_addr;		   /**< Port of the low/full speed device */
-	/** Split transaction position
-	 * One of the following values:
-	 *	  - DWC_HCSPLIT_XACTPOS_MID
-	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
-	 *	  - DWC_HCSPLIT_XACTPOS_END
-	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
-	uint8_t xact_pos;
-
-	/** Set when the host channel does a short read. */
-	uint8_t short_read;
-
-	/**
-	 * Number of requests issued for this channel since it was assigned to
-	 * the current transfer (not counting PINGs).
-	 */
-	uint8_t requests;
-
-	/**
-	 * Queue Head for the transfer being processed by this channel.
-	 */
-	struct dwc_otg_qh *qh;
-
-	/** @} */
-
-	/** Entry in list of host channels. */
-	struct list_head	hc_list_entry;
-} dwc_hc_t;
-
-/**
- * The following parameters may be specified when starting the module. These
- * parameters define how the DWC_otg controller should be configured.
- * Parameter values are passed to the CIL initialization function
- * dwc_otg_cil_init.
- */
-typedef struct dwc_otg_core_params
-{
-	int32_t opt;
-#define dwc_param_opt_default 1
-
-	/**
-	 * Specifies the OTG capabilities. The driver will automatically
-	 * detect the value for this parameter if none is specified.
-	 * 0 - HNP and SRP capable (default)
-	 * 1 - SRP Only capable
-	 * 2 - No HNP/SRP capable
-	 */
-	int32_t otg_cap;
-#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
-
-	/**
-	 * Specifies whether to use slave or DMA mode for accessing the data
-	 * FIFOs. The driver will automatically detect the value for this
-	 * parameter if none is specified.
-	 * 0 - Slave
-	 * 1 - DMA (default, if available)
-	 */
-	int32_t dma_enable;
-#define dwc_param_dma_enable_default 1
-
-	/**
-	 * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
-	 * FIFOs in device mode. The driver will automatically detect the value for this
-	 * parameter if none is specified.
-	 * 0 - address DMA
-	 * 1 - DMA Descriptor(default, if available)
-	 */
-	int32_t dma_desc_enable;
-#define dwc_param_dma_desc_enable_default 0
-	/** The DMA Burst size (applicable only for External DMA
-	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-	 */
-	int32_t dma_burst_size;	 /* Translate this to GAHBCFG values */
-//#define dwc_param_dma_burst_size_default 32
-#define dwc_param_dma_burst_size_default 32
-
-	/**
-	 * Specifies the maximum speed of operation in host and device mode.
-	 * The actual speed depends on the speed of the attached device and
-	 * the value of phy_type. The actual speed depends on the speed of the
-	 * attached device.
-	 * 0 - High Speed (default)
-	 * 1 - Full Speed
-	 */
-	int32_t speed;
-#define dwc_param_speed_default 0
-#define DWC_SPEED_PARAM_HIGH 0
-#define DWC_SPEED_PARAM_FULL 1
-
-	/** Specifies whether low power mode is supported when attached
-	 *	to a Full Speed or Low Speed device in host mode.
-	 * 0 - Don't support low power mode (default)
-	 * 1 - Support low power mode
-	 */
-	int32_t host_support_fs_ls_low_power;
-#define dwc_param_host_support_fs_ls_low_power_default 0
-
-	/** Specifies the PHY clock rate in low power mode when connected to a
-	 * Low Speed device in host mode. This parameter is applicable only if
-	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled.	 If PHY_TYPE is set to FS
-	 * then defaults to 6 MHZ otherwise 48 MHZ.
-	 *
-	 * 0 - 48 MHz
-	 * 1 - 6 MHz
-	 */
-	int32_t host_ls_low_power_phy_clk;
-#define dwc_param_host_ls_low_power_phy_clk_default 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-
-	/**
-	 * 0 - Use cC FIFO size parameters
-	 * 1 - Allow dynamic FIFO sizing (default)
-	 */
-	int32_t enable_dynamic_fifo;
-#define dwc_param_enable_dynamic_fifo_default 1
-
-	/** Total number of 4-byte words in the data FIFO memory. This
-	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-	 * Tx FIFOs.
-	 * 32 to 32768 (default 8192)
-	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-	 */
-	int32_t data_fifo_size;
-#define dwc_param_data_fifo_size_default 8192
-
-	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-	 * FIFO sizing is enabled.
-	 * 16 to 32768 (default 1064)
-	 */
-	int32_t dev_rx_fifo_size;
-//#define dwc_param_dev_rx_fifo_size_default  1064
-#define dwc_param_dev_rx_fifo_size_default  0x100
-
-	/**
-	 * Specifies whether dedicated transmit FIFOs are
-	 * enabled for non periodic IN endpoints in device mode
-	 * 0 - No
-	 * 1 - Yes
-	 */
-	 int32_t en_multiple_tx_fifo;
-#define dwc_param_en_multiple_tx_fifo_default 1
-
-	/** Number of 4-byte words in each of the Tx FIFOs in device
-	 * mode when dynamic FIFO sizing is enabled.
-	 * 4 to 768 (default 256)
-	 */
-	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-//#define dwc_param_dev_tx_fifo_size_default 256
-#define dwc_param_dev_tx_fifo_size_default 0x80
-
-	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-	 * when dynamic FIFO sizing is enabled.
-	 * 16 to 32768 (default 1024)
-	 */
-	int32_t dev_nperio_tx_fifo_size;
-//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-#define dwc_param_dev_nperio_tx_fifo_size_default 0x80
-
-	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
-	 * mode when dynamic FIFO sizing is enabled.
-	 * 4 to 768 (default 256)
-	 */
-	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-//#define dwc_param_dev_perio_tx_fifo_size_default 256
-#define dwc_param_dev_perio_tx_fifo_size_default 0x80
-
-	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-	 * FIFO sizing is enabled.
-	 * 16 to 32768 (default 1024)
-	 */
-	int32_t host_rx_fifo_size;
-//#define dwc_param_host_rx_fifo_size_default 1024
-#define dwc_param_host_rx_fifo_size_default 0x292
-
-	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-	 * when Dynamic FIFO sizing is enabled in the core.
-	 * 16 to 32768 (default 1024)
-	 */
-	int32_t host_nperio_tx_fifo_size;
-//#define dwc_param_host_nperio_tx_fifo_size_default 1024
-//#define dwc_param_host_nperio_tx_fifo_size_default 0x292
-#define dwc_param_host_nperio_tx_fifo_size_default 0x80
-
-	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-	 * FIFO sizing is enabled.
-	 * 16 to 32768 (default 1024)
-	 */
-	int32_t host_perio_tx_fifo_size;
-//#define dwc_param_host_perio_tx_fifo_size_default 1024
-#define dwc_param_host_perio_tx_fifo_size_default 0x292
-
-	/** The maximum transfer size supported in bytes.
-	 * 2047 to 65,535  (default 65,535)
-	 */
-	int32_t max_transfer_size;
-#define dwc_param_max_transfer_size_default 65535
-
-	/** The maximum number of packets in a transfer.
-	 * 15 to 511  (default 511)
-	 */
-	int32_t max_packet_count;
-#define dwc_param_max_packet_count_default 511
-
-	/** The number of host channel registers to use.
-	 * 1 to 16 (default 12)
-	 * Note: The FPGA configuration supports a maximum of 12 host channels.
-	 */
-	int32_t host_channels;
-//#define dwc_param_host_channels_default 12
-#define dwc_param_host_channels_default 16
-
-	/** The number of endpoints in addition to EP0 available for device
-	 * mode operations.
-	 * 1 to 15 (default 6 IN and OUT)
-	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-	 * endpoints in addition to EP0.
-	 */
-	int32_t dev_endpoints;
-//#define dwc_param_dev_endpoints_default 6
-#define dwc_param_dev_endpoints_default 8
-
-		/**
-		 * Specifies the type of PHY interface to use. By default, the driver
-		 * will automatically detect the phy_type.
-		 *
-		 * 0 - Full Speed PHY
-		 * 1 - UTMI+ (default)
-		 * 2 - ULPI
-		 */
-	int32_t phy_type;
-#define DWC_PHY_TYPE_PARAM_FS 0
-#define DWC_PHY_TYPE_PARAM_UTMI 1
-#define DWC_PHY_TYPE_PARAM_ULPI 2
-#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-
-	/**
-	 * Specifies the UTMI+ Data Width.	This parameter is
-	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-	 * PHY_TYPE, this parameter indicates the data width between
-	 * the MAC and the ULPI Wrapper.) Also, this parameter is
-	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-	 * to "8 and 16 bits", meaning that the core has been
-	 * configured to work at either data path width.
-	 *
-	 * 8 or 16 bits (default 16)
-	 */
-	int32_t phy_utmi_width;
-#define dwc_param_phy_utmi_width_default 16
-
-	/**
-	 * Specifies whether the ULPI operates at double or single
-	 * data rate. This parameter is only applicable if PHY_TYPE is
-	 * ULPI.
-	 *
-	 * 0 - single data rate ULPI interface with 8 bit wide data
-	 * bus (default)
-	 * 1 - double data rate ULPI interface with 4 bit wide data
-	 * bus
-	 */
-	int32_t phy_ulpi_ddr;
-#define dwc_param_phy_ulpi_ddr_default 0
-
-	/**
-	 * Specifies whether to use the internal or external supply to
-	 * drive the vbus with a ULPI phy.
-	 */
-	int32_t phy_ulpi_ext_vbus;
-#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-
-	/**
-	 * Specifies whether to use the I2Cinterface for full speed PHY. This
-	 * parameter is only applicable if PHY_TYPE is FS.
-	 * 0 - No (default)
-	 * 1 - Yes
-	 */
-	int32_t i2c_enable;
-#define dwc_param_i2c_enable_default 0
-
-	int32_t ulpi_fs_ls;
-#define dwc_param_ulpi_fs_ls_default 0
-
-	int32_t ts_dline;
-#define dwc_param_ts_dline_default 0
-
-	/** Thresholding enable flag-
-	 * bit 0 - enable non-ISO Tx thresholding
-	 * bit 1 - enable ISO Tx thresholding
-	 * bit 2 - enable Rx thresholding
-	 */
-	uint32_t thr_ctl;
-#define dwc_param_thr_ctl_default 0
-
-	/** Thresholding length for Tx
-	 *	FIFOs in 32 bit DWORDs
-	 */
-	uint32_t tx_thr_length;
-#define dwc_param_tx_thr_length_default 64
-
-	/** Thresholding length for Rx
-	 *	FIFOs in 32 bit DWORDs
-	 */
-	uint32_t rx_thr_length;
-#define dwc_param_rx_thr_length_default 64
-
-	/** Per Transfer Interrupt
-	 *	mode enable flag
-	 * 1 - Enabled
-	 * 0 - Disabled
-	 */
-	uint32_t pti_enable;
-#define dwc_param_pti_enable_default 0
-
-	/** Molti Processor Interrupt
-	 *	mode enable flag
-	 * 1 - Enabled
-	 * 0 - Disabled
-	 */
-	uint32_t mpi_enable;
-#define dwc_param_mpi_enable_default 0
-
-} dwc_otg_core_params_t;
-
-#ifdef DEBUG
-struct dwc_otg_core_if;
-typedef struct hc_xfer_info
-{
-	struct dwc_otg_core_if	*core_if;
-	dwc_hc_t		*hc;
-} hc_xfer_info_t;
-#endif
-
-/**
- * The <code>dwc_otg_core_if</code> structure contains information needed to manage
- * the DWC_otg controller acting in either host or device mode. It
- * represents the programming view of the controller as a whole.
- */
-typedef struct dwc_otg_core_if
-{
-	/** Parameters that define how the core should be configured.*/
-	dwc_otg_core_params_t	   *core_params;
-
-	/** Core Global registers starting at offset 000h. */
-	dwc_otg_core_global_regs_t *core_global_regs;
-
-	/** Device-specific information */
-	dwc_otg_dev_if_t		   *dev_if;
-	/** Host-specific information */
-	dwc_otg_host_if_t		   *host_if;
-
-	/** Value from SNPSID register */
-	uint32_t snpsid;
-
-	/*
-	 * Set to 1 if the core PHY interface bits in USBCFG have been
-	 * initialized.
-	 */
-	uint8_t phy_init_done;
-
-	/*
-	 * SRP Success flag, set by srp success interrupt in FS I2C mode
-	 */
-	uint8_t srp_success;
-	uint8_t srp_timer_started;
-
-	/* Common configuration information */
-	/** Power and Clock Gating Control Register */
-	volatile uint32_t *pcgcctl;
-#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-
-	/** Push/pop addresses for endpoints or host channels.*/
-	uint32_t *data_fifo[MAX_EPS_CHANNELS];
-#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-
-	/** Total RAM for FIFOs (Bytes) */
-	uint16_t total_fifo_size;
-	/** Size of Rx FIFO (Bytes) */
-	uint16_t rx_fifo_size;
-	/** Size of Non-periodic Tx FIFO (Bytes) */
-	uint16_t nperio_tx_fifo_size;
-
-
-	/** 1 if DMA is enabled, 0 otherwise. */
-	uint8_t dma_enable;
-
-	/** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
-	uint8_t dma_desc_enable;
-
-	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
-	uint8_t pti_enh_enable;
-
-	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
-	uint8_t multiproc_int_enable;
-
-	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
-	uint8_t en_multiple_tx_fifo;
-
-	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
-	 * process of being queued */
-	uint8_t queuing_high_bandwidth;
-
-	/** Hardware Configuration -- stored here for convenience.*/
-	hwcfg1_data_t hwcfg1;
-	hwcfg2_data_t hwcfg2;
-	hwcfg3_data_t hwcfg3;
-	hwcfg4_data_t hwcfg4;
-
-	/** Host and Device Configuration -- stored here for convenience.*/
-	hcfg_data_t hcfg;
-	dcfg_data_t dcfg;
-
-	/** The operational State, during transations
-	 * (a_host>>a_peripherial and b_device=>b_host) this may not
-	 * match the core but allows the software to determine
-	 * transitions.
-	 */
-	uint8_t op_state;
-
-	/**
-	 * Set to 1 if the HCD needs to be restarted on a session request
-	 * interrupt. This is required if no connector ID status change has
-	 * occurred since the HCD was last disconnected.
-	 */
-	uint8_t restart_hcd_on_session_req;
-
-	/** HCD callbacks */
-	/** A-Device is a_host */
-#define A_HOST		(1)
-	/** A-Device is a_suspend */
-#define A_SUSPEND	(2)
-	/** A-Device is a_peripherial */
-#define A_PERIPHERAL	(3)
-	/** B-Device is operating as a Peripheral. */
-#define B_PERIPHERAL	(4)
-	/** B-Device is operating as a Host. */
-#define B_HOST		(5)
-
-	/** HCD callbacks */
-	struct dwc_otg_cil_callbacks *hcd_cb;
-	/** PCD callbacks */
-	struct dwc_otg_cil_callbacks *pcd_cb;
-
-	/** Device mode Periodic Tx FIFO Mask */
-	uint32_t p_tx_msk;
-	/** Device mode Periodic Tx FIFO Mask */
-	uint32_t tx_msk;
-
-	/** Workqueue object used for handling several interrupts */
-	struct workqueue_struct *wq_otg;
-
-	/** Work object used for handling "Connector ID Status Change" Interrupt */
-	struct work_struct 	w_conn_id;
-
-	/** Work object used for handling "Wakeup Detected" Interrupt */
-	struct delayed_work	w_wkp;
-
-#ifdef DEBUG
-	uint32_t		start_hcchar_val[MAX_EPS_CHANNELS];
-
-	hc_xfer_info_t		hc_xfer_info[MAX_EPS_CHANNELS];
-	struct timer_list	hc_xfer_timer[MAX_EPS_CHANNELS];
-
-	uint32_t		hfnum_7_samples;
-	uint64_t		hfnum_7_frrem_accum;
-	uint32_t		hfnum_0_samples;
-	uint64_t		hfnum_0_frrem_accum;
-	uint32_t		hfnum_other_samples;
-	uint64_t		hfnum_other_frrem_accum;
-#endif
-
-
-} dwc_otg_core_if_t;
-
-/*We must clear S3C24XX_EINTPEND external interrupt register
- * because after clearing in this register trigerred IRQ from
- * H/W core in kernel interrupt can be occured again before OTG
- * handlers clear all IRQ sources of Core registers because of
- * timing latencies and Low Level IRQ Type.
- */
-
-#ifdef CONFIG_MACH_IPMATE
-#define  S3C2410X_CLEAR_EINTPEND()   \
-do { \
-	if (!dwc_otg_read_core_intr(core_if)) { \
-	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
-	} \
-} while (0)
-#else
-#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
-#endif
-
-/*
- * The following functions are functions for works
- * using during handling some interrupts
- */
-extern void w_conn_id_status_change(struct work_struct *p);
-extern void w_wakeup_detected(struct work_struct *p);
-
-
-/*
- * The following functions support initialization of the CIL driver component
- * and the DWC_otg controller.
- */
-extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
-					   dwc_otg_core_params_t *_core_params);
-extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-
-/** @name Device CIL Functions
- * The following functions support managing the DWC_otg controller in device
- * mode.
- */
-/**@{*/
-extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
-#ifdef DWC_EN_ISOC
-extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-#endif //DWC_EN_ISOC
-/**@}*/
-
-/** @name Host CIL Functions
- * The following functions support managing the DWC_otg controller in host
- * mode.
- */
-/**@{*/
-extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_halt(struct dwc_otg_hcd *_hcd,
-				dwc_hc_t *_hc,
-				dwc_otg_halt_status_e _halt_status);
-extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-
-/**
- * This function Reads HPRT0 in preparation to modify.	It keeps the
- * WC bits 0 so that if they are read as 1, they won't clear when you
- * write it back
- */
-static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-{
-	hprt0_data_t hprt0;
-	hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
-	hprt0.b.prtena = 0;
-	hprt0.b.prtconndet = 0;
-	hprt0.b.prtenchng = 0;
-	hprt0.b.prtovrcurrchng = 0;
-	return hprt0.d32;
-}
-
-extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-/**@}*/
-
-/** @name Common CIL Functions
- * The following functions support managing the DWC_otg controller in either
- * device or host mode.
- */
-/**@{*/
-
-extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-				uint8_t *dest,
-				uint16_t bytes);
-
-extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-
-extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
-								   const int _num );
-extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-
-extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
-extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
-
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
-		dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-}
-
-/**
- * This function returns the OTG Interrupt register.
- */
-static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the IN endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
-{
-	uint32_t v;
-
-	if(core_if->multiproc_int_enable) {
-		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-	} else {
-		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-	}
-	return (v & 0xffff);
-
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the OUT endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
-{
-	uint32_t v;
-
-	if(core_if->multiproc_int_enable) {
-		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-	} else {
-		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-	}
-
-	return ((v & 0xffff0000) >> 16);
-}
-
-/**
- * This function returns the Device IN EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
-							dwc_ep_t *ep)
-{
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	uint32_t v, msk, emp;
-
-	if(core_if->multiproc_int_enable) {
-		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
-		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-		msk |= ((emp >> ep->num) & 0x1) << 7;
-		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-	} else {
-		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-		msk |= ((emp >> ep->num) & 0x1) << 7;
-		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-	}
-
-
-	return v;
-}
-/**
- * This function returns the Device OUT EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
-							dwc_ep_t *_ep)
-{
-	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-	uint32_t v;
-	doepmsk_data_t msk = { .d32 = 0 };
-
-	if(_core_if->multiproc_int_enable) {
-		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
-		if(_core_if->pti_enh_enable) {
-			msk.b.pktdrpsts = 1;
-		}
-		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-	} else {
-		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
-		if(_core_if->pti_enh_enable) {
-			msk.b.pktdrpsts = 1;
-		}
-		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-	}
-	return v;
-}
-
-/**
- * This function returns the Host All Channel Interrupt register
- */
-static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-}
-
-static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
-	return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-}
-
-
-/**
- * This function returns the mode of the operation, host or device.
- *
- * @return 0 - Device Mode, 1 - Host Mode
- */
-static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-}
-
-static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-}
-static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-{
-	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-}
-
-extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-
-
-/**@}*/
-
-/**
- * DWC_otg CIL callback structure.	This structure allows the HCD and
- * PCD to register functions used for starting and stopping the PCD
- * and HCD for role change on for a DRD.
- */
-typedef struct dwc_otg_cil_callbacks
-{
-	/** Start function for role change */
-	int (*start) (void *_p);
-	/** Stop Function for role change */
-	int (*stop) (void *_p);
-	/** Disconnect Function for role change */
-	int (*disconnect) (void *_p);
-	/** Resume/Remote wakeup Function */
-	int (*resume_wakeup) (void *_p);
-	/** Suspend function */
-	int (*suspend) (void *_p);
-	/** Session Start (SRP) */
-	int (*session_start) (void *_p);
-	/** Pointer passed to start() and stop() */
-	void *p;
-} dwc_otg_cil_callbacks_t;
-
-extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
-						dwc_otg_cil_callbacks_t *_cb,
-						void *_p);
-extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
-						dwc_otg_cil_callbacks_t *_cb,
-						void *_p);
-#ifndef warn
-#define warn printk
-#endif
-
-#endif
-
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil_intr.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil_intr.c
deleted file mode 100644
index a404893..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil_intr.c
+++ /dev/null
@@ -1,852 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
- * $Revision: #10 $
- * $Date: 2008/07/16 $
- * $Change: 1065567 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * This file contains the Common Interrupt handlers.
- */
-#include "otg_plat.h"
-#include "otg_regs.h"
-#include "otg_cil.h"
-#include "otg_pcd.h"
-
-#ifdef DEBUG
-inline const char *op_state_str(dwc_otg_core_if_t *core_if)
-{
-        return (core_if->op_state==A_HOST?"a_host":
-                (core_if->op_state==A_SUSPEND?"a_suspend":
-                 (core_if->op_state==A_PERIPHERAL?"a_peripheral":
-                  (core_if->op_state==B_PERIPHERAL?"b_peripheral":
-                   (core_if->op_state==B_HOST?"b_host":
-                    "unknown")))));
-}
-#endif
-
-/** This function will log a debug message
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
-{
-	gintsts_data_t gintsts;
-	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-		 dwc_otg_mode(core_if) ? "Host" : "Device");
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.modemismatch = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-	return 1;
-}
-
-/** Start the HCD.  Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_start(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->hcd_cb && core_if->hcd_cb->start) {
-                core_if->hcd_cb->start(core_if->hcd_cb->p);
-        }
-}
-/** Stop the HCD.  Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_stop(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->hcd_cb && core_if->hcd_cb->stop) {
-                core_if->hcd_cb->stop(core_if->hcd_cb->p);
-        }
-}
-/** Disconnect the HCD.  Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
-                core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
-        }
-}
-/** Inform the HCD the a New Session has begun.  Helper function for
- * using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
-                core_if->hcd_cb->session_start(core_if->hcd_cb->p);
-        }
-}
-
-/** Start the PCD.  Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_start(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->pcd_cb && core_if->pcd_cb->start) {
-                core_if->pcd_cb->start(core_if->pcd_cb->p);
-        }
-}
-/** Stop the PCD.  Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_stop(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->pcd_cb && core_if->pcd_cb->stop) {
-                core_if->pcd_cb->stop(core_if->pcd_cb->p);
-        }
-}
-/** Suspend the PCD.  Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
-                core_if->pcd_cb->suspend(core_if->pcd_cb->p);
-        }
-}
-/** Resume the PCD.  Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_resume(dwc_otg_core_if_t *core_if)
-{
-        if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-                core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-        }
-}
-
-/**
- * This function handles the OTG Interrupts. It reads the OTG
- * Interrupt Register (GOTGINT) to determine what interrupt has
- * occurred.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
-{
-        dwc_otg_core_global_regs_t *global_regs =
-                core_if->core_global_regs;
-	gotgint_data_t gotgint;
-        gotgctl_data_t gotgctl;
-	gintmsk_data_t gintmsk;
-	gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
-        gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
-                    op_state_str(core_if));
-        //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
-
-	if (gotgint.b.sesenddet) {
-		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-			    "Session End Detected++ (%s)\n",
-                            op_state_str(core_if));
-                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-
-                if (core_if->op_state == B_HOST) {
-
-			dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_start(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-                        core_if->op_state = B_PERIPHERAL;
-                } else {
-			dwc_otg_pcd_t *pcd;
-
-                        /* If not B_HOST and Device HNP still set. HNP
-                         * Did not succeed!*/
-                        if (gotgctl.b.devhnpen) {
-                                DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
-                                DWC_ERROR("Device Not Connected/Responding!\n");
-                        }
-
-                        /* If Session End Detected the B-Cable has
-                         * been disconnected. */
-                        /* Reset PCD and Gadget driver to a
-                         * clean state. */
-
-			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_stop(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-                }
-                gotgctl.d32 = 0;
-                gotgctl.b.devhnpen = 1;
-                dwc_modify_reg32(&global_regs->gotgctl,
-                                  gotgctl.d32, 0);
-        }
-	if (gotgint.b.sesreqsucstschng) {
-		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-			    "Session Reqeust Success Status Change++\n");
-                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-                if (gotgctl.b.sesreqscs) {
-			if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-			    (core_if->core_params->i2c_enable)) {
-				core_if->srp_success = 1;
-			}
-			else {
-				dwc_otg_pcd_t *pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-				if(unlikely(!pcd)) {
-					DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-					BUG();
-				}
-				SPIN_LOCK(&pcd->lock);
-
-				pcd_resume(core_if);
-
-				SPIN_UNLOCK(&pcd->lock);
-				/* Clear Session Request */
-				gotgctl.d32 = 0;
-				gotgctl.b.sesreq = 1;
-				dwc_modify_reg32(&global_regs->gotgctl,
-						  gotgctl.d32, 0);
-			}
-                }
-	}
-	if (gotgint.b.hstnegsucstschng) {
-                /* Print statements during the HNP interrupt handling
-                 * can cause it to fail.*/
-                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-                if (gotgctl.b.hstnegscs) {
-                        if (dwc_otg_is_host_mode(core_if)) {
-				dwc_otg_pcd_t *pcd;
-
-                                core_if->op_state = B_HOST;
-				/*
-				 * Need to disable SOF interrupt immediately.
-				 * When switching from device to host, the PCD
-				 * interrupt handler won't handle the
-				 * interrupt if host mode is already set. The
-				 * HCD interrupt handler won't get called if
-				 * the HCD state is HALT. This means that the
-				 * interrupt does not get handled and Linux
-				 * complains loudly.
-				 */
-				gintmsk.d32 = 0;
-				gintmsk.b.sofintr = 1;
-				dwc_modify_reg32(&global_regs->gintmsk,
-						 gintmsk.d32, 0);
-
-				pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-				if(unlikely(!pcd)) {
-					DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-					BUG();
-				}
-				SPIN_LOCK(&pcd->lock);
-
-                                pcd_stop(core_if);
-
-				SPIN_UNLOCK(&pcd->lock);
-                                /*
-                                 * Initialize the Core for Host mode.
-                                 */
-                                hcd_start(core_if);
-                                core_if->op_state = B_HOST;
-                        }
-                } else {
-                        gotgctl.d32 = 0;
-                        gotgctl.b.hnpreq = 1;
-                        gotgctl.b.devhnpen = 1;
-                        dwc_modify_reg32(&global_regs->gotgctl,
-                                          gotgctl.d32, 0);
-                        DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
-                        DWC_ERROR("Device Not Connected/Responding\n");
-                }
-	}
-	if (gotgint.b.hstnegdet) {
-                /* The disconnect interrupt is set at the same time as
-		 * Host Negotiation Detected.  During the mode
-		 * switch all interrupts are cleared so the disconnect
-		 * interrupt handler will not get executed.
-                 */
-		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-			    "Host Negotiation Detected++ (%s)\n",
-                            (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-                if (dwc_otg_is_device_mode(core_if)){
-			dwc_otg_pcd_t *pcd;
-
-                	DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
-                        hcd_disconnect(core_if);
-
-			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_start(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-                        core_if->op_state = A_PERIPHERAL;
-                } else {
-			dwc_otg_pcd_t *pcd;
-
-			/*
-			 * Need to disable SOF interrupt immediately. When
-			 * switching from device to host, the PCD interrupt
-			 * handler won't handle the interrupt if host mode is
-			 * already set. The HCD interrupt handler won't get
-			 * called if the HCD state is HALT. This means that
-			 * the interrupt does not get handled and Linux
-			 * complains loudly.
-			 */
-			gintmsk.d32 = 0;
-			gintmsk.b.sofintr = 1;
-			dwc_modify_reg32(&global_regs->gintmsk,
-					 gintmsk.d32, 0);
-
-			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_stop(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-                        hcd_start(core_if);
-                        core_if->op_state = A_HOST;
-                }
-	}
-	if (gotgint.b.adevtoutchng) {
-		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-			    "A-Device Timeout Change++\n");
-	}
-	if (gotgint.b.debdone) {
-		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-			    "Debounce Done++\n");
-	}
-
-	/* Clear GOTGINT */
-	dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
-
-	return 1;
-}
-
-
-void w_conn_id_status_change(struct work_struct *p)
-{
-	dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
-
-	uint32_t count = 0;
-        gotgctl_data_t gotgctl = { .d32 = 0 };
-
-        gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
-	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-
-        /* B-Device connector (Device Mode) */
-        if (gotgctl.b.conidsts) {
-		dwc_otg_pcd_t *pcd;
-
-                /* Wait for switch to device mode. */
-                while (!dwc_otg_is_device_mode(core_if)){
-                        DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
-                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-                        MDELAY(100);
-                        if (++count > 10000) *(uint32_t*)NULL=0;
-                }
-                core_if->op_state = B_PERIPHERAL;
-		dwc_otg_core_init(core_if);
-		dwc_otg_enable_global_interrupts(core_if);
-
-		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-		if(unlikely(!pcd)) {
-			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-			BUG();
-		}
-		SPIN_LOCK(&pcd->lock);
-
-                pcd_start(core_if);
-
-		SPIN_UNLOCK(&pcd->lock);
-        } else {
-                /* A-Device connector (Host Mode) */
-                while (!dwc_otg_is_host_mode(core_if)) {
-                        DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
-                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-                        MDELAY(100);
-                        if (++count > 10000) *(uint32_t*)NULL=0;
-                }
-                core_if->op_state = A_HOST;
-                /*
-                 * Initialize the Core for Host mode.
-                 */
-		dwc_otg_core_init(core_if);
-		dwc_otg_enable_global_interrupts(core_if);
-                hcd_start(core_if);
-        }
-}
-
-
-/**
- * This function handles the Connector ID Status Change Interrupt.  It
- * reads the OTG Interrupt Register (GOTCTL) to determine whether this
- * is a Device to Host Mode transition or a Host Mode to Device
- * Transition.
- *
- * This only occurs when the cable is connected/removed from the PHY
- * connector.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
-{
-
-	/*
-	 * Need to disable SOF interrupt immediately. If switching from device
-	 * to host, the PCD interrupt handler won't handle the interrupt if
-	 * host mode is already set. The HCD interrupt handler won't get
-	 * called if the HCD state is HALT. This means that the interrupt does
-	 * not get handled and Linux complains loudly.
-	 */
-	gintmsk_data_t gintmsk = { .d32 = 0 };
-	gintsts_data_t gintsts = { .d32 = 0 };
-
-	gintmsk.b.sofintr = 1;
-	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-
-	DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++  (%s)\n",
-                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-
-	/*
-	 * Need to schedule a work, as there are possible DELAY function calls
- 	*/
-	queue_work(core_if->wq_otg, &core_if->w_conn_id);
-
-	/* Set flag and clear interrupt */
-	gintsts.b.conidstschng = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This interrupt indicates that a device is initiating the Session
- * Request Protocol to request the host to turn on bus power so a new
- * session can begin. The handler responds by turning on bus power. If
- * the DWC_otg controller is in low power mode, the handler brings the
- * controller out of low power mode before turning on bus power.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
-{
-        hprt0_data_t hprt0;
-	gintsts_data_t gintsts;
-
-#ifndef DWC_HOST_ONLY
-	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-
-        if (dwc_otg_is_device_mode(core_if)) {
-                DWC_PRINT("SRP: Device mode\n");
-        } else {
-		DWC_PRINT("SRP: Host mode\n");
-
-		/* Turn on the port power bit. */
-		hprt0.d32 = dwc_otg_read_hprt0(core_if);
-		hprt0.b.prtpwr = 1;
-		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
-		/* Start the Connection timer. So a message can be displayed
-		 * if connect does not occur within 10 seconds. */
-		hcd_session_start(core_if);
-        }
-#endif
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.sessreqintr = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-
-void w_wakeup_detected(struct work_struct *p)
-{
-	struct delayed_work *dw = container_of(p, struct delayed_work, work);
-	dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
-
-        /*
-	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-	 * so that OPT tests pass with all PHYs).
-	 */
-        hprt0_data_t hprt0 = {.d32=0};
-        hprt0.d32 = dwc_otg_read_hprt0(core_if);
-        DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-//      MDELAY(70);
-        hprt0.b.prtres = 0; /* Resume */
-        dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-        DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
-}
-/**
- * This interrupt indicates that the DWC_otg controller has detected a
- * resume or remote wakeup sequence. If the DWC_otg controller is in
- * low power mode, the handler must brings the controller out of low
- * power mode. The controller automatically begins resume
- * signaling. The handler schedules a time to stop resume signaling.
- */
-int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
-{
-	gintsts_data_t gintsts;
-
-	DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-
-        if (dwc_otg_is_device_mode(core_if)) {
-                dctl_data_t dctl = {.d32=0};
-                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
-                            dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
-#ifdef PARTIAL_POWER_DOWN
-                if (core_if->hwcfg4.b.power_optimiz) {
-                        pcgcctl_data_t power = {.d32=0};
-
-                        power.d32 = dwc_read_reg32(core_if->pcgcctl);
-                        DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-
-                        power.b.stoppclk = 0;
-                        dwc_write_reg32(core_if->pcgcctl, power.d32);
-
-                        power.b.pwrclmp = 0;
-                        dwc_write_reg32(core_if->pcgcctl, power.d32);
-
-                        power.b.rstpdwnmodule = 0;
-                        dwc_write_reg32(core_if->pcgcctl, power.d32);
-                }
-#endif
-                /* Clear the Remote Wakeup Signalling */
-                dctl.b.rmtwkupsig = 1;
-                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-                                  dctl.d32, 0);
-
-                if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-                        core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-                }
-
-        } else {
-		pcgcctl_data_t pcgcctl = {.d32=0};
-
-		/* Restart the Phy Clock */
-	        pcgcctl.b.stoppclk = 1;
-	        dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-
-	        queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
-        }
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.wkupintr = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This interrupt indicates that a device has been disconnected from
- * the root port.
- */
-int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
-{
-	gintsts_data_t gintsts;
-
-	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
-                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
-                    op_state_str(core_if));
-
-/** @todo Consolidate this if statement. */
-#ifndef DWC_HOST_ONLY
-        if (core_if->op_state == B_HOST) {
-		dwc_otg_pcd_t *pcd;
-
-                /* If in device mode Disconnect and stop the HCD, then
-                 * start the PCD. */
-                hcd_disconnect(core_if);
-
-		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-		if(unlikely(!pcd)) {
-			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-			BUG();
-		}
-		SPIN_LOCK(&pcd->lock);
-
-                pcd_start(core_if);
-
-		SPIN_UNLOCK(&pcd->lock);
-                core_if->op_state = B_PERIPHERAL;
-        } else if (dwc_otg_is_device_mode(core_if)) {
-                gotgctl_data_t gotgctl = { .d32 = 0 };
-                gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-                if (gotgctl.b.hstsethnpen==1) {
-                        /* Do nothing, if HNP in process the OTG
-                         * interrupt "Host Negotiation Detected"
-                         * interrupt will do the mode switch.
-                         */
-                } else if (gotgctl.b.devhnpen == 0) {
-			dwc_otg_pcd_t *pcd;
-
-                        /* If in device mode Disconnect and stop the HCD, then
-                         * start the PCD. */
-                        hcd_disconnect(core_if);
-
-			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_start(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-
-                        core_if->op_state = B_PERIPHERAL;
-                } else {
-                        DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
-                }
-        } else {
-                if (core_if->op_state == A_HOST) {
-                        /* A-Cable still connected but device disconnected. */
-                        hcd_disconnect(core_if);
-                }
-        }
-#endif
-
-	gintsts.d32 = 0;
-	gintsts.b.disconnect = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-	return 1;
-}
-/**
- * This interrupt indicates that SUSPEND state has been detected on
- * the USB.
- *
- * For HNP the USB Suspend interrupt signals the change from
- * "a_peripheral" to "a_host".
- *
- * When power management is enabled the core will be put in low power
- * mode.
- */
-int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
-{
-        dsts_data_t dsts;
-        gintsts_data_t gintsts;
-
-        DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-
-        if (dwc_otg_is_device_mode(core_if)) {
-		dwc_otg_pcd_t *pcd;
-
-                /* Check the Device status register to determine if the Suspend
-                 * state is active. */
-                dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
-                DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
-                            "HWCFG4.power Optimize=%d\n",
-                            dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
-
-
-#ifdef PARTIAL_POWER_DOWN
-/** @todo Add a module parameter for power management. */
-                if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
-                        pcgcctl_data_t power = {.d32=0};
-                        DWC_DEBUGPL(DBG_CIL, "suspend\n");
-
-                        power.b.pwrclmp = 1;
-                        dwc_write_reg32(core_if->pcgcctl, power.d32);
-
-                        power.b.rstpdwnmodule = 1;
-                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-
-                        power.b.stoppclk = 1;
-                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-                } else {
-                        DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
-                }
-#endif
-                /* PCD callback for suspend. */
-		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-		if(unlikely(!pcd)) {
-			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-			BUG();
-		}
-		SPIN_LOCK(&pcd->lock);
-
-                pcd_suspend(core_if);
-
-		SPIN_UNLOCK(&pcd->lock);
-        } else {
-                if (core_if->op_state == A_PERIPHERAL) {
-			dwc_otg_pcd_t *pcd;
-
-                        DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
-                        /* Clear the a_peripheral flag, back to a_host. */
-
-			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-			if(unlikely(!pcd)) {
-				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-				BUG();
-			}
-			SPIN_LOCK(&pcd->lock);
-
-                        pcd_stop(core_if);
-
-			SPIN_UNLOCK(&pcd->lock);
-
-                        hcd_start(core_if);
-                        core_if->op_state = A_HOST;
-                }
-        }
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.usbsuspend = 1;
-	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
-
-        return 1;
-}
-
-
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
-{
-        gintsts_data_t gintsts;
-        gintmsk_data_t gintmsk;
-        gintmsk_data_t gintmsk_common = {.d32=0};
-	gintmsk_common.b.wkupintr = 1;
-	gintmsk_common.b.sessreqintr = 1;
-	gintmsk_common.b.conidstschng = 1;
-	gintmsk_common.b.otgintr = 1;
-	gintmsk_common.b.modemismatch = 1;
-        gintmsk_common.b.disconnect = 1;
-        gintmsk_common.b.usbsuspend = 1;
-        /** @todo: The port interrupt occurs while in device
-         * mode. Added code to CIL to clear the interrupt for now!
-         */
-        gintmsk_common.b.portintr = 1;
-
-        gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
-        gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
-#ifdef DEBUG
-        /* if any common interrupts set */
-        if (gintsts.d32 & gintmsk_common.d32) {
-                DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n",
-                            gintsts.d32, gintmsk.d32);
-        }
-#endif
-
-        return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-
-}
-
-/**
- * Common interrupt handler.
- *
- * The common interrupts are those that occur in both Host and Device mode.
- * This handler handles the following interrupts:
- * - Mode Mismatch Interrupt
- * - Disconnect Interrupt
- * - OTG Interrupt
- * - Connector ID Status Change Interrupt
- * - Session Request Interrupt.
- * - Resume / Remote Wakeup Detected Interrupt.
- *
- */
-int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
-{
-	int retval = 0;
-        gintsts_data_t gintsts;
-
-        gintsts.d32 = dwc_otg_read_common_intr(core_if);
-
-        if (gintsts.b.modemismatch) {
-                retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
-        }
-        if (gintsts.b.otgintr) {
-                retval |= dwc_otg_handle_otg_intr(core_if);
-        }
-        if (gintsts.b.conidstschng) {
-                retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
-        }
-        if (gintsts.b.disconnect) {
-                retval |= dwc_otg_handle_disconnect_intr(core_if);
-        }
-        if (gintsts.b.sessreqintr) {
-                retval |= dwc_otg_handle_session_req_intr(core_if);
-        }
-        if (gintsts.b.wkupintr) {
-                retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
-        }
-        if (gintsts.b.usbsuspend) {
-                retval |= dwc_otg_handle_usb_suspend_intr(core_if);
-        }
-        if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
-                /* The port interrupt occurs while in device mode with HPRT0
-                 * Port Enable/Disable.
-                 */
-                gintsts.d32 = 0;
-                gintsts.b.portintr = 1;
-                dwc_write_reg32(&core_if->core_global_regs->gintsts,
-                                gintsts.d32);
-                retval |= 1;
-
-        }
-
-	S3C2410X_CLEAR_EINTPEND();
-
-        return retval;
-}
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.c
deleted file mode 100644
index 549c6eb..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.c
+++ /dev/null
@@ -1,964 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
- * $Revision: #63 $
- * $Date: 2008/09/24 $
- * $Change: 1101777 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- * The dwc_otg_driver module provides the initialization and cleanup entry
- * points for the DWC_otg driver. This module will be dynamically installed
- * after Linux is booted using the insmod command. When the module is
- * installed, the dwc_otg_driver_init function is called. When the module is
- * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
- *
- * This module also defines a data structure for the dwc_otg_driver, which is
- * used in conjunction with the standard ARM lm_device structure. These
- * structures allow the OTG driver to comply with the standard Linux driver
- * model in which devices and drivers are registered with a bus driver. This
- * has the benefit that Linux can expose attributes of the driver and device
- * in its special sysfs file system. Users can then read or write files in
- * this file system to perform diagnostics on the driver components or the
- * device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h>	 /* permission constants */
-#include <linux/version.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-
-#include <asm/sizes.h>
-
-#include "otg_plat.h"
-#include "otg_attr.h"
-#include "otg_driver.h"
-#include "otg_cil.h"
-#include "otg_pcd.h"
-#include "otg_hcd.h"
-
-#define DWC_DRIVER_VERSION	"2.72a 24-JUN-2008"
-#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
-
-static const char dwc_driver_name[] = "dwc_otg";
-
-/*-------------------------------------------------------------------------*/
-/* Encapsulate the module parameter settings */
-
-static dwc_otg_core_params_t dwc_otg_module_params = {
-	.opt = -1,
-	.otg_cap = -1,
-	.dma_enable = -1,
-	.dma_desc_enable = -1,
-	.dma_burst_size = -1,
-	.speed = -1,
-	.host_support_fs_ls_low_power = -1,
-	.host_ls_low_power_phy_clk = -1,
-	.enable_dynamic_fifo = -1,
-	.data_fifo_size = -1,
-	.dev_rx_fifo_size = -1,
-	.dev_nperio_tx_fifo_size = -1,
-	.dev_perio_tx_fifo_size = {
-		/* dev_perio_tx_fifo_size_1 */
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1
-		/* 15 */
-	},
-	.host_rx_fifo_size = -1,
-	.host_nperio_tx_fifo_size = -1,
-	.host_perio_tx_fifo_size = -1,
-	.max_transfer_size = -1,
-	.max_packet_count = -1,
-	.host_channels = -1,
-	.dev_endpoints = -1,
-	.phy_type = -1,
-	.phy_utmi_width = -1,
-	.phy_ulpi_ddr = -1,
-	.phy_ulpi_ext_vbus = -1,
-	.i2c_enable = -1,
-	.ulpi_fs_ls = -1,
-	.ts_dline = -1,
-	.en_multiple_tx_fifo = -1,
-	.dev_tx_fifo_size = {
-		/* dev_tx_fifo_size */
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1,
-		-1
-		/* 15 */
-	},
-	.thr_ctl = -1,
-	.tx_thr_length = -1,
-	.rx_thr_length = -1,
-	.pti_enable = -1,
-	.mpi_enable = -1,
-};
-
-/**
- * Global Debug Level Mask.
- */
-uint32_t g_dbg_lvl = 0; /* OFF */
-
-/**
- * This function is called during module intialization to verify that
- * the module parameters are in a valid state.
- */
-static int check_parameters(dwc_otg_core_if_t *core_if)
-{
-	int i;
-	int retval = 0;
-
-/* Checks if the parameter is outside of its valid range of values */
-#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
-		((dwc_otg_module_params._param_ < (_low_)) || \
-		(dwc_otg_module_params._param_ > (_high_)))
-
-/* If the parameter has been set by the user, check that the parameter value is
- * within the value range of values.  If not, report a module error. */
-#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
-		do { \
-			if (dwc_otg_module_params._param_ != -1) { \
-				if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
-					DWC_ERROR("`%d' invalid for parameter `%s'\n", \
-						  dwc_otg_module_params._param_, _string_); \
-					dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-					retval++; \
-				} \
-			} \
-		} while (0)
-
-	DWC_OTG_PARAM_ERR(opt,0,1,"opt");
-	DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
-	DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
-	DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
-	DWC_OTG_PARAM_ERR(speed,0,1,"speed");
-	DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
-	DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
-	DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
-	DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
-	DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
-	DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
-	DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
-	DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
-	DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
-	DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
-	DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
-	DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
-	DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
-	DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
-	DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
-	DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
-	DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
-	DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
-	DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-
-	if (dwc_otg_module_params.dma_burst_size != -1) {
-		if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
-		    DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
-			DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
-				  dwc_otg_module_params.dma_burst_size);
-			dwc_otg_module_params.dma_burst_size = 32;
-			retval++;
-		}
-
-		{
-			uint8_t brst_sz = 0;
-			while(dwc_otg_module_params.dma_burst_size > 1) {
-				brst_sz ++;
-				dwc_otg_module_params.dma_burst_size >>= 1;
-			}
-			dwc_otg_module_params.dma_burst_size = brst_sz;
-		}
-	}
-
-	if (dwc_otg_module_params.phy_utmi_width != -1) {
-		if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
-		    DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
-			DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
-				  dwc_otg_module_params.phy_utmi_width);
-			dwc_otg_module_params.phy_utmi_width = 16;
-			retval++;
-		}
-	}
-
-	for (i = 0; i < 15; i++) {
-		/** @todo should be like above */
-		//DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
-		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
-			if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
-				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-					  dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
-				dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-				retval++;
-			}
-		}
-	}
-
-	DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
-
-	for (i = 0; i < 15; i++) {
-		/** @todo should be like above */
-		//DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
-		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
-			if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
-				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-					  dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
-				dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-				retval++;
-			}
-		}
-	}
-
-	DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
-	DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
-	DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-
-	DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
-	DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
-
-	/* At this point, all module parameters that have been set by the user
-	 * are valid, and those that have not are left unset.  Now set their
-	 * default values and/or check the parameters against the hardware
-	 * configurations of the OTG core. */
-
-/* This sets the parameter to the default value if it has not been set by the
- * user */
-#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
-	({ \
-		int changed = 1; \
-		if (dwc_otg_module_params._param_ == -1) { \
-			changed = 0; \
-			dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-		} \
-		changed; \
-	})
-
-/* This checks the macro agains the hardware configuration to see if it is
- * valid.  It is possible that the default value could be invalid. In this
- * case, it will report a module error if the user touched the parameter.
- * Otherwise it will adjust the value without any error. */
-#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
-	({ \
-		int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
-		int error = 0; \
-		if (!(_is_valid_)) { \
-			if (changed) { \
-				DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
-				error = 1; \
-			} \
-			dwc_otg_module_params._param_ = (_set_valid_); \
-		} \
-		error; \
-	})
-
-	/* OTG Cap */
-	retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
-				({
-					int valid;
-					valid = 1;
-					switch (dwc_otg_module_params.otg_cap) {
-					case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
-						if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-							valid = 0;
-						break;
-					case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
-						if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
-						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
-						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
-						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-							valid = 0;
-						}
-						break;
-					case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-						/* always valid */
-						break;
-					}
-					valid;
-				}),
-				(((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
-				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
-				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
-				 DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
-				 DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
-				((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
-				0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
-				((dwc_otg_module_params.dma_desc_enable == 1) &&
-				 ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
-				0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
-
-	DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
-				"host_support_fs_ls_low_power",
-				1, 0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
-					"enable_dynamic_fifo",
-					((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
-					(core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
-					"data_fifo_size",
-					(dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
-					core_if->hwcfg3.b.dfifo_depth);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
-					"dev_rx_fifo_size",
-					(dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
-					"dev_nperio_tx_fifo_size",
-					(dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
-					"host_rx_fifo_size",
-					(dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
-					"host_nperio_tx_fifo_size",
-					(dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
-					"host_perio_tx_fifo_size",
-					(dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
-					((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
-					"max_transfer_size",
-					(dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
-					((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
-					"max_packet_count",
-					(dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
-					((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
-					"host_channels",
-					(dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
-					(core_if->hwcfg2.b.num_host_chan + 1));
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
-					"dev_endpoints",
-					(dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
-					core_if->hwcfg2.b.num_dev_ep);
-
-/*
- * Define the following to disable the FS PHY Hardware checking.  This is for
- * internal testing only.
- *
- * #define NO_FS_PHY_HW_CHECKS
- */
-
-#ifdef NO_FS_PHY_HW_CHECKS
-	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-				"phy_type", 1, 0);
-#else
-	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-				"phy_type",
-				({
-					int valid = 0;
-					if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
-					((core_if->hwcfg2.b.hs_phy_type == 1) ||
-					 (core_if->hwcfg2.b.hs_phy_type == 3))) {
-						valid = 1;
-					}
-					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
-						 ((core_if->hwcfg2.b.hs_phy_type == 2) ||
-						  (core_if->hwcfg2.b.hs_phy_type == 3))) {
-						valid = 1;
-					}
-					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-						 (core_if->hwcfg2.b.fs_phy_type == 1)) {
-						valid = 1;
-					}
-					valid;
-				}),
-				({
-					int set = DWC_PHY_TYPE_PARAM_FS;
-					if (core_if->hwcfg2.b.hs_phy_type) {
-						if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
-						(core_if->hwcfg2.b.hs_phy_type == 1)) {
-							set = DWC_PHY_TYPE_PARAM_UTMI;
-						}
-						else {
-							set = DWC_PHY_TYPE_PARAM_ULPI;
-						}
-					}
-					set;
-				}));
-#endif
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
-				(dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
-				dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
-				"host_ls_low_power_phy_clk",
-				((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
-				((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-
-	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
-	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
-	DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
-	DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
-	DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-
-#ifdef NO_FS_PHY_HW_CHECKS
-	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
-#else
-	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
-				"i2c_enable",
-				(dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
-				0);
-#endif
-
-	for (i = 0; i < 15; i++) {
-		int changed = 1;
-		int error = 0;
-
-		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
-			changed = 0;
-			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-		}
-		if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-			if (changed) {
-				DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
-				error = 1;
-			}
-			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-		}
-		retval += error;
-	}
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
-						((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
-						0);
-
-	for (i = 0; i < 15; i++) {
-		int changed = 1;
-		int error = 0;
-
-		if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
-			changed = 0;
-			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-		}
-		if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-			if (changed) {
-				DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
-				error = 1;
-			}
-			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-		}
-		retval += error;
-	}
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
-				((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
-				0);
-
-	DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
-	DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
-		((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
-			0);
-
-	retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
-			((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
-			0);
-	return retval;
-}
-
-/**
- * This function is the top level interrupt handler for the Common
- * (Device and host modes) interrupts.
- */
-static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
-{
-	dwc_otg_device_t *otg_dev = dev;
-	int32_t retval = IRQ_NONE;
-
-	retval = dwc_otg_handle_common_intr(otg_dev->core_if);
-	return IRQ_RETVAL(retval);
-}
-
-/**
- * This function is called when a lm_device is unregistered with the
- * dwc_otg_driver. This happens, for example, when the rmmod command is
- * executed. The device may or may not be electrically present. If it is
- * present, the driver stops device processing. Any resources used on behalf
- * of this device are freed.
- *
- * @param[in] lmdev
- */
-static int dwc_otg_driver_cleanup(struct platform_device *pdev)
-{
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-	DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
-
-	if (!otg_dev) {
-		/* Memory allocation for the dwc_otg_device failed. */
-		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-		return 0;
-	}
-
-	/*
-	 * Free the IRQ
-	 */
-	if (otg_dev->common_irq_installed) {
-		free_irq(otg_dev->irq, otg_dev);
-	}
-
-#ifndef DWC_DEVICE_ONLY
-	if (otg_dev->hcd) {
-		dwc_otg_hcd_remove(pdev);
-	} else {
-		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-		return 0;
-	}
-#endif
-
-#ifndef DWC_HOST_ONLY
-	if (otg_dev->pcd) {
-		dwc_otg_pcd_remove(pdev);
-	}
-#endif
-	if (otg_dev->core_if) {
-		dwc_otg_cil_remove(otg_dev->core_if);
-	}
-
-	/*
-	 * Remove the device attributes
-	 */
-	dwc_otg_attr_remove(pdev);
-
-	/*
-	 * Return the memory.
-	 */
-	if (otg_dev->base) {
-		iounmap(otg_dev->base);
-	}
-	kfree(otg_dev);
-
-	/*
-	 * Clear the drvdata pointer.
-	 */
-	platform_set_drvdata(pdev, 0);
-
-	return 0;
-}
-
-/**
- * This function is called when an lm_device is bound to a
- * dwc_otg_driver. It creates the driver components required to
- * control the device (CIL, HCD, and PCD) and it initializes the
- * device. The driver components are stored in a dwc_otg_device
- * structure. A reference to the dwc_otg_device is saved in the
- * lm_device. This allows the driver to access the dwc_otg_device
- * structure on subsequent calls to driver methods for this device.
- *
- * @param[in] lmdev  lm_device definition
- */
-static int dwc_otg_driver_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int retval = 0;
-	uint32_t snpsid;
-	dwc_otg_device_t *dwc_otg_device;
-	struct resource *res;
-
-	dev_dbg(dev, "dwc_otg_driver_probe(%p)\n", pdev);
-
-	dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
-
-	if (!dwc_otg_device) {
-		dev_err(dev, "kmalloc of dwc_otg_device failed\n");
-		retval = -ENOMEM;
-		goto fail;
-	}
-
-	memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
-	dwc_otg_device->reg_offset = 0xFFFFFFFF;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "Found OTG with no register addr.\n");
-		retval = -ENODEV;
-		goto fail;
-	}
-	dwc_otg_device->rsrc_start = res->start;
-	dwc_otg_device->rsrc_len = res->end - res->start + 1;
-
-	dwc_otg_device->base = ioremap(dwc_otg_device->rsrc_start, dwc_otg_device->rsrc_len);
-
-	if (!dwc_otg_device->base) {
-		dev_err(dev, "ioremap() failed\n");
-		retval = -ENOMEM;
-		goto fail;
-	}
-	dev_dbg(dev, "base=0x%08x\n", (unsigned)dwc_otg_device->base);
-
-	/*
-	 * Attempt to ensure this device is really a DWC_otg Controller.
-	 * Read and verify the SNPSID register contents. The value should be
-	 * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
-	 */
-	snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
-
-	if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
-		dev_err(dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
-		retval = -EINVAL;
-		goto fail;
-	}
-
-	DWC_PRINT("Core Release: %x.%x%x%x\n",
-			(snpsid >> 12 & 0xF),
-			(snpsid >> 8 & 0xF),
-			(snpsid >> 4 & 0xF),
-			(snpsid & 0xF));
-
-	/*
-	 * Initialize driver data to point to the global DWC_otg
-	 * Device structure.
-	 */
-	platform_set_drvdata(pdev, dwc_otg_device);
-
-	dev_dbg(dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
-
-	dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->base,
-						   &dwc_otg_module_params);
-
-	dwc_otg_device->core_if->snpsid = snpsid;
-
-	if (!dwc_otg_device->core_if) {
-		dev_err(dev, "CIL initialization failed!\n");
-		retval = -ENOMEM;
-		goto fail;
-	}
-
-	/*
-	 * Validate parameter values.
-	 */
-	if (check_parameters(dwc_otg_device->core_if)) {
-		retval = -EINVAL;
-		goto fail;
-	}
-
-	/*
-	 * Create Device Attributes in sysfs
-	 */
-	dwc_otg_attr_create(pdev);
-
-	/*
-	 * Disable the global interrupt until all the interrupt
-	 * handlers are installed.
-	 */
-	dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
-
-	/*
-	 * Install the interrupt handler for the common interrupts before
-	 * enabling common interrupts in core_init below.
-	 */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(dev, "Fount OTG with to IRQ.\n");
-		retval = -ENODEV;
-		goto fail;
-	}
-	dwc_otg_device->irq = res->start;
-
-	retval = request_irq(res->start, dwc_otg_common_irq,
-			     IRQF_SHARED, "dwc_otg", dwc_otg_device);
-	if (retval) {
-		DWC_ERROR("request of irq%d failed\n", res->start);
-		retval = -EBUSY;
-		goto fail;
-	} else {
-		dwc_otg_device->common_irq_installed = 1;
-	}
-
-	/*
-	 * Initialize the DWC_otg core.
-	 */
-	dwc_otg_core_init(dwc_otg_device->core_if);
-
-#ifndef DWC_HOST_ONLY
-	/*
-	 * Initialize the PCD
-	 */
-	retval = dwc_otg_pcd_init(pdev);
-	if (retval != 0) {
-		DWC_ERROR("dwc_otg_pcd_init failed\n");
-		dwc_otg_device->pcd = NULL;
-		goto fail;
-	}
-#endif
-#ifndef DWC_DEVICE_ONLY
-	/*
-	 * Initialize the HCD
-	 */
-	retval = dwc_otg_hcd_init(pdev);
-	if (retval != 0) {
-		DWC_ERROR("dwc_otg_hcd_init failed\n");
-		dwc_otg_device->hcd = NULL;
-		goto fail;
-	}
-#endif
-
-	/*
-	 * Enable the global interrupt after all the interrupt
-	 * handlers are installed.
-	 */
-	dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
-
-	return 0;
-
- fail:
-	dwc_otg_driver_cleanup(pdev);
-	return retval;
-}
-
-static int dwc_otg_driver_remove(struct platform_device *pdev)
-{
-	return dwc_otg_driver_cleanup(pdev);
-}
-
-static struct platform_driver dwc_otg_platform_driver = {
-	.driver.name = "dwc_otg",
-	.probe = dwc_otg_driver_probe,
-	.remove = dwc_otg_driver_remove,
-};
-
-static int __init dwc_otg_init_module(void)
-{
-	return platform_driver_register(&dwc_otg_platform_driver);
-}
-
-static void __exit dwc_otg_cleanup_module(void)
-{
-	platform_driver_unregister(&dwc_otg_platform_driver);
-}
-
-module_init(dwc_otg_init_module);
-module_exit(dwc_otg_cleanup_module);
-
-/**
- * This function is called when the driver is removed from the kernel
- * with the rmmod command. The driver unregisters itself with its bus
- * driver.
- *
- */
-
-MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-MODULE_AUTHOR("Synopsys Inc.");
-MODULE_LICENSE("GPL");
-
-module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-MODULE_PARM_DESC(opt, "OPT Mode");
-module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-
-module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
-MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
-
-module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-/** @todo Set the max to 512K, modify checks */
-MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-module_param_named(debug, g_dbg_lvl, int, 0444);
-MODULE_PARM_DESC(debug, "");
-
-module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-
-module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-
-module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
-MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
-
-module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
-MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.h
deleted file mode 100644
index 2f56a26..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_driver.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
- * $Revision: #12 $
- * $Date: 2008/07/15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#ifndef __DWC_OTG_DRIVER_H__
-#define __DWC_OTG_DRIVER_H__
-
-/** @file
- * This file contains the interface to the Linux driver.
- */
-#include "otg_cil.h"
-
-/* Type declarations */
-struct dwc_otg_pcd;
-struct dwc_otg_hcd;
-
-/**
- * This structure is a wrapper that encapsulates the driver components used to
- * manage a single DWC_otg controller.
- */
-typedef struct dwc_otg_device {
-	void *base;
-	dwc_otg_core_if_t *core_if;
-	uint32_t reg_offset;
-	struct dwc_otg_pcd *pcd;
-	struct dwc_otg_hcd *hcd;
-	uint8_t common_irq_installed;
-	int irq;
-	uint32_t rsrc_start;
-	uint32_t rsrc_len;
-} dwc_otg_device_t;
-
-#endif
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.c
deleted file mode 100644
index 9c1d04f..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.c
+++ /dev/null
@@ -1,2898 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
- * $Revision: #75 $
- * $Date: 2008/07/15 $
- * $Change: 1064940 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the implementation of the HCD. In Linux, the HCD
- * implements the hc_driver API.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-
-#include "otg_driver.h"
-#include "otg_hcd.h"
-#include "otg_regs.h"
-
-static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
-
-static const struct hc_driver dwc_otg_hc_driver = {
-
-	.description =		dwc_otg_hcd_name,
-	.product_desc = 	"DWC OTG Controller",
-	.hcd_priv_size = 	sizeof(dwc_otg_hcd_t),
-	.irq =			dwc_otg_hcd_irq,
-	.flags =		HCD_MEMORY | HCD_USB2,
-	.start =		dwc_otg_hcd_start,
-	.stop =			dwc_otg_hcd_stop,
-	.urb_enqueue =		dwc_otg_hcd_urb_enqueue,
-	.urb_dequeue =		dwc_otg_hcd_urb_dequeue,
-	.endpoint_disable =	dwc_otg_hcd_endpoint_disable,
-	.get_frame_number =	dwc_otg_hcd_get_frame_number,
-	.hub_status_data =	dwc_otg_hcd_hub_status_data,
-	.hub_control =		dwc_otg_hcd_hub_control,
-};
-
-/**
- * Work queue function for starting the HCD when A-Cable is connected.
- * The dwc_otg_hcd_start() must be called in a process context.
- */
-static void hcd_start_func(struct work_struct *_work)
-{
-	struct delayed_work *dw = container_of(_work, struct delayed_work, work);
-	struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
-	struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
-	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
-	if (usb_hcd) {
-		dwc_otg_hcd_start(usb_hcd);
-	}
-}
-
-/**
- * HCD Callback function for starting the HCD when A-Cable is
- * connected.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_start_cb(void *p)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-	hprt0_data_t hprt0;
-
-	if (core_if->op_state == B_HOST) {
-		/*
-		 * Reset the port.  During a HNP mode switch the reset
-		 * needs to occur within 1ms and have a duration of at
-		 * least 50ms.
-		 */
-		hprt0.d32 = dwc_otg_read_hprt0(core_if);
-		hprt0.b.prtrst = 1;
-		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-		((struct usb_hcd *)p)->self.is_b_host = 1;
-	} else {
-		((struct usb_hcd *)p)->self.is_b_host = 0;
-	}
-
-	/* Need to start the HCD in a non-interrupt context. */
-//	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-	INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-//	schedule_work(&dwc_otg_hcd->start_work);
-	queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
-
-	return 1;
-}
-
-/**
- * HCD Callback function for stopping the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_stop_cb(void *p)
-{
-	struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
-	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-	dwc_otg_hcd_stop(usb_hcd);
-	return 1;
-}
-
-static void del_xfer_timers(dwc_otg_hcd_t *hcd)
-{
-#ifdef DEBUG
-	int i;
-	int num_channels = hcd->core_if->core_params->host_channels;
-	for (i = 0; i < num_channels; i++) {
-		del_timer(&hcd->core_if->hc_xfer_timer[i]);
-	}
-#endif
-}
-
-static void del_timers(dwc_otg_hcd_t *hcd)
-{
-	del_xfer_timers(hcd);
-	del_timer(&hcd->conn_timer);
-}
-
-/**
- * Processes all the URBs in a single list of QHs. Completes them with
- * -ETIMEDOUT and frees the QTD.
- */
-static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-{
-	struct list_head	*qh_item;
-	dwc_otg_qh_t		*qh;
-	struct list_head	*qtd_item;
-	dwc_otg_qtd_t		*qtd;
-	unsigned long		flags;
-
-	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-	list_for_each(qh_item, qh_list) {
-		qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
-		for (qtd_item = qh->qtd_list.next;
-		     qtd_item != &qh->qtd_list;
-		     qtd_item = qh->qtd_list.next) {
-			qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
-			if (qtd->urb != NULL) {
-				SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-				dwc_otg_hcd_complete_urb(hcd, qtd->urb,
-							 -ETIMEDOUT);
-				SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-			}
-			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-		}
-	}
-	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-}
-
-/**
- * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
- * and periodic schedules. The QTD associated with each URB is removed from
- * the schedule and freed. This function may be called when a disconnect is
- * detected or when the HCD is being stopped.
- */
-static void kill_all_urbs(dwc_otg_hcd_t *hcd)
-{
-	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
-	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
-	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
-	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
-	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
-	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_disconnect_cb(void *p)
-{
-	gintsts_data_t 	intr;
-	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-
-	//DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-
-	/*
-	 * Set status flags for the hub driver.
-	 */
-	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-	dwc_otg_hcd->flags.b.port_connect_status = 0;
-
-	/*
-	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
-	 * interrupt mask and status bits and disabling subsequent host
-	 * channel interrupts.
-	 */
-	intr.d32 = 0;
-	intr.b.nptxfempty = 1;
-	intr.b.ptxfempty = 1;
-	intr.b.hcintr = 1;
-	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
-	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-
-	del_timers(dwc_otg_hcd);
-
-	/*
-	 * Turn off the vbus power only if the core has transitioned to device
-	 * mode. If still in host mode, need to keep power on to detect a
-	 * reconnection.
-	 */
-	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
-		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
-			hprt0_data_t hprt0 = { .d32=0 };
-			DWC_PRINT("Disconnect: PortPower off\n");
-			hprt0.b.prtpwr = 0;
-			dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-		}
-
-		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-	}
-
-	/* Respond with an error status to all URBs in the schedule. */
-	kill_all_urbs(dwc_otg_hcd);
-
-	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
-		/* Clean up any host channels that were in use. */
-		int			num_channels;
-		int			i;
-		dwc_hc_t		*channel;
-		dwc_otg_hc_regs_t	*hc_regs;
-		hcchar_data_t		hcchar;
-
-		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-
-		if (!dwc_otg_hcd->core_if->dma_enable) {
-			/* Flush out any channel requests in slave mode. */
-			for (i = 0; i < num_channels; i++) {
-				channel = dwc_otg_hcd->hc_ptr_array[i];
-				if (list_empty(&channel->hc_list_entry)) {
-					hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-					hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-					if (hcchar.b.chen) {
-						hcchar.b.chen = 0;
-						hcchar.b.chdis = 1;
-						hcchar.b.epdir = 0;
-						dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-					}
-				}
-			}
-		}
-
-		for (i = 0; i < num_channels; i++) {
-			channel = dwc_otg_hcd->hc_ptr_array[i];
-			if (list_empty(&channel->hc_list_entry)) {
-				hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-				if (hcchar.b.chen) {
-					/* Halt the channel. */
-					hcchar.b.chdis = 1;
-					dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-				}
-
-				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
-				list_add_tail(&channel->hc_list_entry,
-					      &dwc_otg_hcd->free_hc_list);
-			}
-		}
-	}
-
-	/* A disconnect will end the session so the B-Device is no
-	 * longer a B-host. */
-	((struct usb_hcd *)p)->self.is_b_host = 0;
-	return 1;
-}
-
-/**
- * Connection timeout function.  An OTG host is required to display a
- * message if the device does not connect within 10 seconds.
- */
-void dwc_otg_hcd_connect_timeout(unsigned long ptr)
-{
-	DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
-	DWC_PRINT("Connect Timeout\n");
-	DWC_ERROR("Device Not Connected/Responding\n");
-}
-
-/**
- * Start the connection timer.  An OTG host is required to display a
- * message if the device does not connect within 10 seconds.  The
- * timer is deleted if a port connect interrupt occurs before the
- * timer expires.
- */
-static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
-{
-	init_timer(&hcd->conn_timer);
-	hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
-	hcd->conn_timer.data = 0;
-	hcd->conn_timer.expires = jiffies + (HZ * 10);
-	add_timer(&hcd->conn_timer);
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_session_start_cb(void *p)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
-	return 1;
-}
-
-/**
- * HCD Callback structure for handling mode switching.
- */
-static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
-	.start = dwc_otg_hcd_start_cb,
-	.stop = dwc_otg_hcd_stop_cb,
-	.disconnect = dwc_otg_hcd_disconnect_cb,
-	.session_start = dwc_otg_hcd_session_start_cb,
-	.p = 0,
-};
-
-/**
- * Reset tasklet function
- */
-static void reset_tasklet_func(unsigned long data)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
-	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-	hprt0_data_t hprt0;
-
-	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-
-	hprt0.d32 = dwc_otg_read_hprt0(core_if);
-	hprt0.b.prtrst = 1;
-	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-	mdelay(60);
-
-	hprt0.b.prtrst = 0;
-	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-	dwc_otg_hcd->flags.b.port_reset_change = 1;
-}
-
-static struct tasklet_struct reset_tasklet = {
-	.next = NULL,
-	.state = 0,
-	.count = ATOMIC_INIT(0),
-	.func = reset_tasklet_func,
-	.data = 0,
-};
-
-/**
- * Initializes the HCD. This function allocates memory for and initializes the
- * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
- * USB bus with the core and calls the hc_driver->start() function. It returns
- * a negative error on failure.
- */
-int dwc_otg_hcd_init(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = NULL;
-	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-
-	int 		num_channels;
-	int 		i;
-	dwc_hc_t	*channel;
-
-	int retval = 0;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-
-	/* Set device flags indicating whether the HCD supports DMA. */
-	if (otg_dev->core_if->dma_enable) {
-		DWC_PRINT("Using DMA mode\n");
-
-		if (otg_dev->core_if->dma_desc_enable) {
-			DWC_PRINT("Device using Descriptor DMA mode\n");
-		} else {
-			DWC_PRINT("Device using Buffer DMA mode\n");
-		}
-	}
-	/*
-	 * Allocate memory for the base HCD plus the DWC OTG HCD.
-	 * Initialize the base HCD.
-	 */
-
-	hcd = usb_create_hcd(&dwc_otg_hc_driver, &pdev->dev, "gadget");
-	if (!hcd) {
-		retval = -ENOMEM;
-		goto error1;
-	}
-
-	hcd->regs = otg_dev->base;
-	hcd->self.otg_port = 1;
-
-	/* Integrate TT in root hub, by default this is disbled. */
-	hcd->has_tt = 1;
-
-	/* Initialize the DWC OTG HCD. */
-	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_hcd->core_if = otg_dev->core_if;
-	otg_dev->hcd = dwc_otg_hcd;
-	init_hcd_usecs(dwc_otg_hcd);
-
-	/* */
-	spin_lock_init(&dwc_otg_hcd->lock);
-
-	/* Register the HCD CIL Callbacks */
-	dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
-					   &hcd_cil_callbacks, hcd);
-
-	/* Initialize the non-periodic schedule. */
-	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
-	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
-
-	/* Initialize the periodic schedule. */
-	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
-	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
-	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
-	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-
-	/*
-	 * Create a host channel descriptor for each host channel implemented
-	 * in the controller. Initialize the channel descriptor array.
-	 */
-	INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
-	num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-	memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
-	for (i = 0; i < num_channels; i++) {
-		channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
-		if (channel == NULL) {
-			retval = -ENOMEM;
-			DWC_ERROR("%s: host channel allocation failed\n", __func__);
-			goto error2;
-		}
-		memset(channel, 0, sizeof(dwc_hc_t));
-		channel->hc_num = i;
-		dwc_otg_hcd->hc_ptr_array[i] = channel;
-#ifdef DEBUG
-		init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-#endif
-		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
-	}
-
-	/* Initialize the Connection timeout timer. */
-	init_timer(&dwc_otg_hcd->conn_timer);
-
-	/* Initialize reset tasklet. */
-	reset_tasklet.data = (unsigned long) dwc_otg_hcd;
-	dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-
-	/*
-	 * Finish generic HCD initialization and start the HCD. This function
-	 * allocates the DMA buffer pool, registers the USB bus, requests the
-	 * IRQ line, and calls dwc_otg_hcd_start method.
-	 */
-	retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
-	if (retval < 0) {
-		goto error2;
-	}
-
-	/*
-	 * Allocate space for storing data on status transactions. Normally no
-	 * data is sent, but this space acts as a bit bucket. This must be
-	 * done after usb_add_hcd since that function allocates the DMA buffer
-	 * pool.
-	 */
-	if (otg_dev->core_if->dma_enable) {
-		dwc_otg_hcd->status_buf =
-			dma_alloc_coherent(&pdev->dev,
-					   DWC_OTG_HCD_STATUS_BUF_SIZE,
-					   &dwc_otg_hcd->status_buf_dma,
-					   GFP_KERNEL | GFP_DMA);
-	} else {
-		dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
-						  GFP_KERNEL);
-	}
-	if (!dwc_otg_hcd->status_buf) {
-		retval = -ENOMEM;
-		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
-		goto error3;
-	}
-
-	dwc_otg_hcd->otg_dev = otg_dev;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, usbbus=%d\n",
-		    hcd->self.busnum);
-	return 0;
-
-	/* Error conditions */
- error3:
-	usb_remove_hcd(hcd);
- error2:
-	dwc_otg_hcd_free(hcd);
-	usb_put_hcd(hcd);
- error1:
-	return retval;
-}
-
-/**
- * Removes the HCD.
- * Frees memory and resources associated with the HCD and deregisters the bus.
- */
-void dwc_otg_hcd_remove(struct platform_device *pdev)
-{
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-	dwc_otg_hcd_t *dwc_otg_hcd;
-	struct usb_hcd *hcd;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-
-	if (!otg_dev) {
-		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-		return;
-	}
-
-	dwc_otg_hcd = otg_dev->hcd;
-
-	if (!dwc_otg_hcd) {
-		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-		return;
-	}
-
-	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-
-	if (!hcd) {
-		DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
-		return;
-	}
-
-	/* Turn off all interrupts */
-	dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
-	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-
-	usb_remove_hcd(hcd);
-	dwc_otg_hcd_free(hcd);
-	usb_put_hcd(hcd);
-}
-
-/* =========================================================================
- *  Linux HC Driver Functions
- * ========================================================================= */
-
-/**
- * Initializes dynamic portions of the DWC_otg HCD state.
- */
-static void hcd_reinit(dwc_otg_hcd_t *hcd)
-{
-	struct list_head 	*item;
-	int			num_channels;
-	int			i;
-	dwc_hc_t		*channel;
-
-	hcd->flags.d32 = 0;
-
-	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
-	hcd->non_periodic_channels = 0;
-	hcd->periodic_channels = 0;
-	hcd->nakking_channels = 0;
-
-	/*
-	 * Put all channels in the free channel list and clean up channel
-	 * states.
-	 */
-	item = hcd->free_hc_list.next;
-	while (item != &hcd->free_hc_list) {
-		list_del(item);
-		item = hcd->free_hc_list.next;
-	}
-	num_channels = hcd->core_if->core_params->host_channels;
-	for (i = 0; i < num_channels; i++) {
-		channel = hcd->hc_ptr_array[i];
-		list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
-		dwc_otg_hc_cleanup(hcd->core_if, channel);
-	}
-
-	/* Initialize the DWC core for host mode operation. */
-	dwc_otg_core_host_init(hcd->core_if);
-}
-
-/** Initializes the DWC_otg controller and its root hub and prepares it for host
- * mode operation. Activates the root port. Returns 0 on success and a negative
- * error code on failure. */
-int dwc_otg_hcd_start(struct usb_hcd *hcd)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-  	struct usb_bus *bus;
-
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-
-	bus = hcd_to_bus(hcd);
-
-	/* Initialize the bus state.  If the core is in Device Mode
-	 * HALT the USB bus and return. */
-	if (dwc_otg_is_device_mode(core_if)) {
-		hcd->state = HC_STATE_RUNNING;
-		return 0;
-	}
-	hcd->state = HC_STATE_RUNNING;
-
-	/* Initialize and connect root hub if one is not already attached */
-	if (bus->root_hub) {
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
-		/* Inform the HUB driver to resume. */
-		usb_hcd_resume_root_hub(hcd);
-	}
-	else {
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
-	}
-
-	hcd_reinit(dwc_otg_hcd);
-
-	return 0;
-}
-
-static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-{
-	struct list_head 	*item;
-	dwc_otg_qh_t		*qh;
-	unsigned long flags;
-
-	if (!qh_list->next) {
-		/* The list hasn't been initialized yet. */
-		return;
-	}
-
-	/* Ensure there are no QTDs or URBs left. */
-	kill_urbs_in_qh_list(hcd, qh_list);
-
-	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-	for (item = qh_list->next; item != qh_list; item = qh_list->next) {
-		qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
-	}
-	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-}
-
-/**
- * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
- * stopped.
- */
-void dwc_otg_hcd_stop(struct usb_hcd *hcd)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	hprt0_data_t hprt0 = { .d32=0 };
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-
-	/* Turn off all host-specific interrupts. */
-	dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-
-	/*
-	 * The root hub should be disconnected before this function is called.
-	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
-	 * and the QH lists (via ..._hcd_endpoint_disable).
-	 */
-
-	/* Turn off the vbus power */
-	DWC_PRINT("PortPower off\n");
-	hprt0.b.prtpwr = 0;
-	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-}
-
-/** Returns the current frame number. */
-int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	hfnum_data_t hfnum;
-
-	hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
-				   host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-#endif
-	return hfnum.b.frnum;
-}
-
-/**
- * Frees secondary storage associated with the dwc_otg_hcd structure contained
- * in the struct usb_hcd field.
- */
-void dwc_otg_hcd_free(struct usb_hcd *hcd)
-{
-	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	int		i;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-
-	del_timers(dwc_otg_hcd);
-
-	/* Free memory for QH/QTD lists */
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
-	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-
-	/* Free memory for the host channels. */
-	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
-		if (hc != NULL) {
-			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
-			kfree(hc);
-		}
-	}
-
-	if (dwc_otg_hcd->core_if->dma_enable) {
-		if (dwc_otg_hcd->status_buf_dma) {
-			dma_free_coherent(hcd->self.controller,
-					  DWC_OTG_HCD_STATUS_BUF_SIZE,
-					  dwc_otg_hcd->status_buf,
-					  dwc_otg_hcd->status_buf_dma);
-		}
-	} else if (dwc_otg_hcd->status_buf != NULL) {
-		kfree(dwc_otg_hcd->status_buf);
-	}
-}
-
-#ifdef DEBUG
-static void dump_urb_info(struct urb *urb, char* fn_name)
-{
-	DWC_PRINT("%s, urb %p\n", fn_name, urb);
-	DWC_PRINT("  Device address: %d\n", usb_pipedevice(urb->pipe));
-	DWC_PRINT("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-	DWC_PRINT("  Endpoint type: %s\n",
-		  ({char *pipetype;
-		    switch (usb_pipetype(urb->pipe)) {
-		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
-		    case PIPE_BULK: pipetype = "BULK"; break;
-		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-		    default: pipetype = "UNKNOWN"; break;
-		   }; pipetype;}));
-	DWC_PRINT("  Speed: %s\n",
-		  ({char *speed;
-		    switch (urb->dev->speed) {
-		    case USB_SPEED_HIGH: speed = "HIGH"; break;
-		    case USB_SPEED_FULL: speed = "FULL"; break;
-		    case USB_SPEED_LOW: speed = "LOW"; break;
-		    default: speed = "UNKNOWN"; break;
-		   }; speed;}));
-	DWC_PRINT("  Max packet size: %d\n",
-		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-	DWC_PRINT("  Data buffer length: %d\n", urb->transfer_buffer_length);
-	DWC_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
-		  urb->transfer_buffer, (void *)urb->transfer_dma);
-	DWC_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
-		  urb->setup_packet, (void *)urb->setup_dma);
-	DWC_PRINT("  Interval: %d\n", urb->interval);
-	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-		int i;
-		for (i = 0; i < urb->number_of_packets;  i++) {
-			DWC_PRINT("  ISO Desc %d:\n", i);
-			DWC_PRINT("    offset: %d, length %d\n",
-				  urb->iso_frame_desc[i].offset,
-				  urb->iso_frame_desc[i].length);
-		}
-	}
-}
-
-static void dump_channel_info(dwc_otg_hcd_t *hcd,
-			      dwc_otg_qh_t *qh)
-{
-	if (qh->channel != NULL) {
-		dwc_hc_t *hc = qh->channel;
-		struct list_head *item;
-		dwc_otg_qh_t *qh_item;
-		int num_channels = hcd->core_if->core_params->host_channels;
-		int i;
-
-		dwc_otg_hc_regs_t *hc_regs;
-		hcchar_data_t 	hcchar;
-		hcsplt_data_t	hcsplt;
-		hctsiz_data_t 	hctsiz;
-		uint32_t	hcdma;
-
-		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-		hcdma = dwc_read_reg32(&hc_regs->hcdma);
-
-		DWC_PRINT("  Assigned to channel %p:\n", hc);
-		DWC_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-		DWC_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
-		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
-		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
-		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
-		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
-		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
-		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
-		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
-		DWC_PRINT("    qh: %p\n", hc->qh);
-		DWC_PRINT("  NP inactive sched:\n");
-		list_for_each(item, &hcd->non_periodic_sched_inactive) {
-			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-			DWC_PRINT("    %p\n", qh_item);
-		}
-		DWC_PRINT("  NP active sched:\n");
-		list_for_each(item, &hcd->non_periodic_sched_active) {
-			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-			DWC_PRINT("    %p\n", qh_item);
-		}
-		DWC_PRINT("  Channels: \n");
-		for (i = 0; i < num_channels; i++) {
-			dwc_hc_t *hc = hcd->hc_ptr_array[i];
-			DWC_PRINT("    %2d: %p\n", i, hc);
-		}
-	}
-}
-#endif
-
-
-//OTG host require the DMA addr is DWORD-aligned,
-//patch it if the buffer is not DWORD-aligned
-inline
-int hcd_check_and_patch_dma_addr(struct urb *urb){
-
-	if((!urb->transfer_buffer)||!urb->transfer_dma||urb->transfer_dma==0xffffffff)
-		return 0;
-
-	if(((u32)urb->transfer_buffer)& 0x3){
-		/*
-		printk("%s: "
-			"urb(%.8x) "
-			"transfer_buffer=%.8x, "
-			"transfer_dma=%.8x, "
-			"transfer_buffer_length=%d, "
-			"actual_length=%d(%x), "
-			"\n",
-			((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT)?"OUT":"IN",
-			urb,
-			urb->transfer_buffer,
-			urb->transfer_dma,
-			urb->transfer_buffer_length,
-			urb->actual_length,urb->actual_length
-		);
-		*/
-		if(!urb->aligned_transfer_buffer||urb->aligned_transfer_buffer_length<urb->transfer_buffer_length){
-			urb->aligned_transfer_buffer_length=urb->transfer_buffer_length;
-			if(urb->aligned_transfer_buffer) {
-				kfree(urb->aligned_transfer_buffer);
-			}
-			urb->aligned_transfer_buffer=kmalloc(urb->aligned_transfer_buffer_length,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
-			if(!urb->aligned_transfer_buffer){
-				DWC_ERROR("Cannot alloc required buffer!!\n");
-				//BUG();
-				return -1;
-			}
-			urb->aligned_transfer_dma=dma_map_single(NULL,(void *)(urb->aligned_transfer_buffer),(urb->aligned_transfer_buffer_length),DMA_FROM_DEVICE);
-			//printk(" new allocated aligned_buf=%.8x aligned_buf_len=%d\n", (u32)urb->aligned_transfer_buffer, urb->aligned_transfer_buffer_length);
-		}
-		urb->transfer_dma=urb->aligned_transfer_dma;
-		if((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT) {
-			memcpy(urb->aligned_transfer_buffer,urb->transfer_buffer,urb->transfer_buffer_length);
-			dma_sync_single_for_device(NULL,urb->transfer_dma,urb->transfer_buffer_length,DMA_TO_DEVICE);
-		}
-	}
-	return 0;
-}
-
-
-
-/** Starts processing a USB transfer request specified by a USB Request Block
- * (URB). mem_flags indicates the type of memory allocation to use while
- * processing this URB. */
-int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-//			    struct usb_host_endpoint *ep,
-			    struct urb *urb,
-			    gfp_t mem_flags
-			  )
-{
-	int retval = 0;
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_qtd_t *qtd;
-	unsigned long flags;
-
-	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-
-	if (urb->hcpriv != NULL) {
-		SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-		return -ENOMEM;
-
-	}
-#ifdef DEBUG
-	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-		dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
-	}
-#endif
-	if (!dwc_otg_hcd->flags.b.port_connect_status) {
-		/* No longer connected. */
-		SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-		return -ENODEV;
-	}
-
-	if (hcd_check_and_patch_dma_addr(urb)) {
-		DWC_ERROR("Unable to check and patch dma addr\n");
-		SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-		return -ENOMEM;
-	}
-	qtd = dwc_otg_hcd_qtd_create(urb);
-	if (qtd == NULL) {
-		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
-		SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-		return -ENOMEM;
-	}
-
-	retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
-	if (retval < 0) {
-		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
-			  "Error status %d\n", retval);
-		dwc_otg_hcd_qtd_free(qtd);
-	}
-	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-	return retval;
-}
-
-/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
- * success.  */
-int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-			    struct urb *urb, int status)
-{
-	unsigned long flags;
-	dwc_otg_hcd_t *dwc_otg_hcd;
-	dwc_otg_qtd_t *urb_qtd;
-	dwc_otg_qh_t *qh;
-	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-	int rc;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-
-	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-
-	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-
-	urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
-	qh = (dwc_otg_qh_t *)ep->hcpriv;
-
-#ifdef DEBUG
-	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-		dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
-		if (urb_qtd == qh->qtd_in_process) {
-			dump_channel_info(dwc_otg_hcd, qh);
-		}
-	}
-#endif
-
-	if (qh && urb_qtd == qh->qtd_in_process) {
-		/* The QTD is in process (it has been assigned to a channel). */
-
-		if (dwc_otg_hcd->flags.b.port_connect_status) {
-			/*
-			 * If still connected (i.e. in host mode), halt the
-			 * channel so it can be used for other transfers. If
-			 * no longer connected, the host registers can't be
-			 * written to halt the channel since the core is in
-			 * device mode.
-			 */
-			dwc_otg_hc_halt(dwc_otg_hcd, qh->channel,
-					DWC_OTG_HC_XFER_URB_DEQUEUE);
-		}
-	}
-
-	/*
-	 * Free the QTD and clean up the associated QH. Leave the QH in the
-	 * schedule if it has any remaining QTDs.
-	 */
-	dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
-	if (qh && urb_qtd == qh->qtd_in_process) {
-		dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
-		qh->channel = NULL;
-		qh->qtd_in_process = NULL;
-	} else {
-		if (qh && list_empty(&qh->qtd_list)) {
-			dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
-		}
-	}
-
-
-	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
-
-	if (!rc) {
-		usb_hcd_unlink_urb_from_ep(hcd, urb);
-	}
-	urb->hcpriv = NULL;
-	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-
-	if (!rc) {
-		usb_hcd_giveback_urb(hcd, urb, status);
-	}
-	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-		DWC_PRINT("Called usb_hcd_giveback_urb()\n");
-		DWC_PRINT("  urb->status = %d\n", urb->status);
-	}
-
-	return 0;
-}
-
-/** Frees resources in the DWC_otg controller related to a given endpoint. Also
- * clears state in the HCD related to the endpoint. Any URBs for the endpoint
- * must already be dequeued. */
-void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-				  struct usb_host_endpoint *ep)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_qh_t *qh;
-
-	unsigned long flags;
-	int retry = 0;
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-		    "endpoint=%d\n", ep->desc.bEndpointAddress,
-		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
-
-rescan:
-	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-	qh = (dwc_otg_qh_t *)(ep->hcpriv);
-	if (!qh)
-		goto done;
-
-	/** Check that the QTD list is really empty */
-	if (!list_empty(&qh->qtd_list)) {
-		if (retry++ < 250) {
-			SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-			schedule_timeout_uninterruptible(1);
-			goto rescan;
-		}
-
-		DWC_WARN("DWC OTG HCD EP DISABLE:"
-			 " QTD List for this endpoint is not empty\n");
-	}
-
-	dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-	ep->hcpriv = NULL;
-done:
-	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-}
-
-/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
- * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
- * interrupt.
- *
- * This function is called by the USB core when an interrupt occurs */
-irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
-{
-        int retVal = 0;
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	retVal = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
-        if (dwc_otg_hcd->flags.b.port_connect_status_change == 1)
-        	usb_hcd_poll_rh_status(hcd);
-	return IRQ_RETVAL(retVal);
-}
-
-/** Creates Status Change bitmap for the root hub and root port. The bitmap is
- * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
- * is the status change indicator for the single root port. Returns 1 if either
- * change indicator is 1, otherwise returns 0. */
-int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-
-	buf[0] = 0;
-	buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
-		    dwc_otg_hcd->flags.b.port_reset_change ||
-		    dwc_otg_hcd->flags.b.port_enable_change ||
-		    dwc_otg_hcd->flags.b.port_suspend_change ||
-		    dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-
-#ifdef DEBUG
-	if (buf[0]) {
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
-			    " Root port status changed\n");
-		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
-			    dwc_otg_hcd->flags.b.port_connect_status_change);
-		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
-			    dwc_otg_hcd->flags.b.port_reset_change);
-		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
-			    dwc_otg_hcd->flags.b.port_enable_change);
-		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
-			    dwc_otg_hcd->flags.b.port_suspend_change);
-		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
-			    dwc_otg_hcd->flags.b.port_over_current_change);
-	}
-#endif
-	return (buf[0] != 0);
-}
-
-#ifdef DWC_HS_ELECT_TST
-/*
- * Quick and dirty hack to implement the HS Electrical Test
- * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
- *
- * This code was copied from our userspace app "hset". It sends a
- * Get Device Descriptor control sequence in two parts, first the
- * Setup packet by itself, followed some time later by the In and
- * Ack packets. Rather than trying to figure out how to add this
- * functionality to the normal driver code, we just hijack the
- * hardware, using these two function to drive the hardware
- * directly.
- */
-
-dwc_otg_core_global_regs_t *global_regs;
-dwc_otg_host_global_regs_t *hc_global_regs;
-dwc_otg_hc_regs_t *hc_regs;
-uint32_t *data_fifo;
-
-static void do_setup(void)
-{
-	gintsts_data_t gintsts;
-	hctsiz_data_t hctsiz;
-	hcchar_data_t hcchar;
-	haint_data_t haint;
-	hcint_data_t hcint;
-
-	/* Enable HAINTs */
-	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
-	/* Enable HCINTs */
-	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-	/*
-	 * Send Setup packet (Get Device Descriptor)
-	 */
-
-	/* Make sure channel is disabled */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	if (hcchar.b.chen) {
-		//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
-		hcchar.b.chdis = 1;
-//		hcchar.b.chen = 1;
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-		//sleep(1);
-		mdelay(1000);
-
-		/* Read GINTSTS */
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-		/* Read HAINT */
-		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-		/* Read HCINT */
-		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-		/* Read HCCHAR */
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-		/* Clear HCINT */
-		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-		/* Clear HAINT */
-		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-		/* Clear GINTSTS */
-		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//if (hcchar.b.chen) {
-		//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
-		//}
-	}
-
-	/* Set HCTSIZ */
-	hctsiz.d32 = 0;
-	hctsiz.b.xfersize = 8;
-	hctsiz.b.pktcnt = 1;
-	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
-	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
-	/* Set HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-	hcchar.b.epdir = 0;
-	hcchar.b.epnum = 0;
-	hcchar.b.mps = 8;
-	hcchar.b.chen = 1;
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
-	/* Fill FIFO with Setup data for Get Device Descriptor */
-	data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-	dwc_write_reg32(data_fifo++, 0x01000680);
-	dwc_write_reg32(data_fifo++, 0x00080000);
-
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Wait for host channel interrupt */
-	do {
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	} while (gintsts.b.hcintr == 0);
-
-	//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Disable HCINTs */
-	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
-	/* Disable HAINTs */
-	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-
-static void do_in_ack(void)
-{
-	gintsts_data_t gintsts;
-	hctsiz_data_t hctsiz;
-	hcchar_data_t hcchar;
-	haint_data_t haint;
-	hcint_data_t hcint;
-	host_grxsts_data_t grxsts;
-
-	/* Enable HAINTs */
-	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
-	/* Enable HCINTs */
-	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-	/*
-	 * Receive Control In packet
-	 */
-
-	/* Make sure channel is disabled */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	if (hcchar.b.chen) {
-		//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
-		hcchar.b.chdis = 1;
-		hcchar.b.chen = 1;
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-		//sleep(1);
-		mdelay(1000);
-
-		/* Read GINTSTS */
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-		/* Read HAINT */
-		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-		/* Read HCINT */
-		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-		/* Read HCCHAR */
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-		/* Clear HCINT */
-		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-		/* Clear HAINT */
-		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-		/* Clear GINTSTS */
-		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//if (hcchar.b.chen) {
-		//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
-		//}
-	}
-
-	/* Set HCTSIZ */
-	hctsiz.d32 = 0;
-	hctsiz.b.xfersize = 8;
-	hctsiz.b.pktcnt = 1;
-	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
-	/* Set HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-	hcchar.b.epdir = 1;
-	hcchar.b.epnum = 0;
-	hcchar.b.mps = 8;
-	hcchar.b.chen = 1;
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Wait for receive status queue interrupt */
-	do {
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	} while (gintsts.b.rxstsqlvl == 0);
-
-	//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Read RXSTS */
-	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
-	/* Clear RXSTSQLVL in GINTSTS */
-	gintsts.d32 = 0;
-	gintsts.b.rxstsqlvl = 1;
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	switch (grxsts.b.pktsts) {
-	case DWC_GRXSTS_PKTSTS_IN:
-		/* Read the data into the host buffer */
-		if (grxsts.b.bcnt > 0) {
-			int i;
-			int word_count = (grxsts.b.bcnt + 3) / 4;
-
-			data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
-			for (i = 0; i < word_count; i++) {
-				(void)dwc_read_reg32(data_fifo++);
-			}
-		}
-
-		//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
-	break;
-
-	default:
-		//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
-	break;
-	}
-
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Wait for receive status queue interrupt */
-	do {
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	} while (gintsts.b.rxstsqlvl == 0);
-
-	//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Read RXSTS */
-	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
-	/* Clear RXSTSQLVL in GINTSTS */
-	gintsts.d32 = 0;
-	gintsts.b.rxstsqlvl = 1;
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	switch (grxsts.b.pktsts) {
-	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-	break;
-
-	default:
-		//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
-	break;
-	}
-
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Wait for host channel interrupt */
-	do {
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	} while (gintsts.b.hcintr == 0);
-
-	//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-//	usleep(100000);
-//	mdelay(100);
-	mdelay(1);
-
-	/*
-	 * Send handshake packet
-	 */
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-	/* Make sure channel is disabled */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	if (hcchar.b.chen) {
-		//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
-		hcchar.b.chdis = 1;
-		hcchar.b.chen = 1;
-		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-		//sleep(1);
-		mdelay(1000);
-
-		/* Read GINTSTS */
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-		/* Read HAINT */
-		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-		/* Read HCINT */
-		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-		/* Read HCCHAR */
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-		/* Clear HCINT */
-		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-		/* Clear HAINT */
-		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-		/* Clear GINTSTS */
-		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		//if (hcchar.b.chen) {
-		//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
-		//}
-	}
-
-	/* Set HCTSIZ */
-	hctsiz.d32 = 0;
-	hctsiz.b.xfersize = 0;
-	hctsiz.b.pktcnt = 1;
-	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
-	/* Set HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-	hcchar.b.epdir = 0;
-	hcchar.b.epnum = 0;
-	hcchar.b.mps = 8;
-	hcchar.b.chen = 1;
-	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Wait for host channel interrupt */
-	do {
-		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	} while (gintsts.b.hcintr == 0);
-
-	//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
-	/* Disable HCINTs */
-	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
-	/* Disable HAINTs */
-	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
-	/* Read HAINT */
-	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
-	/* Read HCINT */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
-	/* Read HCCHAR */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
-	/* Clear HCINT */
-	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
-	/* Clear HAINT */
-	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
-	/* Clear GINTSTS */
-	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
-	/* Read GINTSTS */
-	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-#endif /* DWC_HS_ELECT_TST */
-
-/** Handles hub class-specific requests. */
-int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-			    u16 typeReq,
-			    u16 wValue,
-			    u16 wIndex,
-			    char *buf,
-			    u16 wLength)
-{
-	int retval = 0;
-
-	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-	dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
-	struct usb_hub_descriptor *desc;
-	hprt0_data_t hprt0 = {.d32 = 0};
-
-	uint32_t port_status;
-
-	switch (typeReq) {
-	case ClearHubFeature:
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-			    "ClearHubFeature 0x%x\n", wValue);
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-		case C_HUB_OVER_CURRENT:
-			/* Nothing required here */
-			break;
-		default:
-			retval = -EINVAL;
-			DWC_ERROR("DWC OTG HCD - "
-				  "ClearHubFeature request %xh unknown\n", wValue);
-		}
-		break;
-	case ClearPortFeature:
-		if (!wIndex || wIndex > 1)
-			goto error;
-
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			hprt0.b.prtena = 1;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			break;
-		case USB_PORT_FEAT_SUSPEND:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			hprt0.b.prtres = 1;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			/* Clear Resume bit */
-			mdelay(100);
-			hprt0.b.prtres = 0;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			break;
-		case USB_PORT_FEAT_POWER:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			hprt0.b.prtpwr = 0;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			break;
-		case USB_PORT_FEAT_INDICATOR:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-			/* Port inidicator not supported */
-			break;
-		case USB_PORT_FEAT_C_CONNECTION:
-			/* Clears drivers internal connect status change
-			 * flag */
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
-			break;
-		case USB_PORT_FEAT_C_RESET:
-			/* Clears the driver's internal Port Reset Change
-			 * flag */
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-			dwc_otg_hcd->flags.b.port_reset_change = 0;
-			break;
-		case USB_PORT_FEAT_C_ENABLE:
-			/* Clears the driver's internal Port
-			 * Enable/Disable Change flag */
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-			dwc_otg_hcd->flags.b.port_enable_change = 0;
-			break;
-		case USB_PORT_FEAT_C_SUSPEND:
-			/* Clears the driver's internal Port Suspend
-			 * Change flag, which is set when resume signaling on
-			 * the host port is complete */
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-			dwc_otg_hcd->flags.b.port_suspend_change = 0;
-			break;
-		case USB_PORT_FEAT_C_OVER_CURRENT:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-			dwc_otg_hcd->flags.b.port_over_current_change = 0;
-			break;
-		default:
-			retval = -EINVAL;
-			DWC_ERROR("DWC OTG HCD - "
-				  "ClearPortFeature request %xh "
-				  "unknown or unsupported\n", wValue);
-		}
-		break;
-	case GetHubDescriptor:
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-			    "GetHubDescriptor\n");
-		desc = (struct usb_hub_descriptor *)buf;
-		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
-		desc->bNbrPorts = 1;
-		desc->wHubCharacteristics = 0x08;
-		desc->bPwrOn2PwrGood = 1;
-		desc->bHubContrCurrent = 0;
-		desc->u.hs.DeviceRemovable[0] = 0;
-		desc->u.hs.DeviceRemovable[1] = 0xff;
-		break;
-	case GetHubStatus:
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-			    "GetHubStatus\n");
-		memset(buf, 0, 4);
-		break;
-	case GetPortStatus:
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-			    "GetPortStatus\n");
-
-		if (!wIndex || wIndex > 1)
-			goto error;
-
-		port_status = 0;
-
-		if (dwc_otg_hcd->flags.b.port_connect_status_change)
-			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
-		if (dwc_otg_hcd->flags.b.port_enable_change)
-			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-
-		if (dwc_otg_hcd->flags.b.port_suspend_change)
-			port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-
-		if (dwc_otg_hcd->flags.b.port_reset_change)
-			port_status |= (1 << USB_PORT_FEAT_C_RESET);
-
-		if (dwc_otg_hcd->flags.b.port_over_current_change) {
-			DWC_ERROR("Device Not Supported\n");
-			port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
-		}
-
-		if (!dwc_otg_hcd->flags.b.port_connect_status) {
-			/*
-			 * The port is disconnected, which means the core is
-			 * either in device mode or it soon will be. Just
-			 * return 0's for the remainder of the port status
-			 * since the port register can't be read if the core
-			 * is in device mode.
-			 */
-			*((__le32 *) buf) = cpu_to_le32(port_status);
-			break;
-		}
-
-		hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
-		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
-
-		if (hprt0.b.prtconnsts)
-			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-
-		if (hprt0.b.prtena)
-			port_status |= (1 << USB_PORT_FEAT_ENABLE);
-
-		if (hprt0.b.prtsusp)
-			port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-
-		if (hprt0.b.prtovrcurract)
-			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-
-		if (hprt0.b.prtrst)
-			port_status |= (1 << USB_PORT_FEAT_RESET);
-
-		if (hprt0.b.prtpwr)
-			port_status |= (1 << USB_PORT_FEAT_POWER);
-
-		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-			port_status |= (USB_PORT_STAT_HIGH_SPEED);
-		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
-			port_status |= (USB_PORT_STAT_LOW_SPEED);
-
-		if (hprt0.b.prttstctl)
-			port_status |= (1 << USB_PORT_FEAT_TEST);
-
-		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-
-		*((__le32 *) buf) = cpu_to_le32(port_status);
-
-		break;
-	case SetHubFeature:
-		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-			    "SetHubFeature\n");
-		/* No HUB features supported */
-		break;
-	case SetPortFeature:
-		if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
-			goto error;
-
-		if (!dwc_otg_hcd->flags.b.port_connect_status) {
-			/*
-			 * The port is disconnected, which means the core is
-			 * either in device mode or it soon will be. Just
-			 * return without doing anything since the port
-			 * register can't be written if the core is in device
-			 * mode.
-			 */
-			break;
-		}
-
-		switch (wValue) {
-		case USB_PORT_FEAT_SUSPEND:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-			if (hcd->self.otg_port == wIndex &&
-			    hcd->self.b_hnp_enable) {
-				gotgctl_data_t  gotgctl = {.d32=0};
-				gotgctl.b.hstsethnpen = 1;
-				dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-						  0, gotgctl.d32);
-				core_if->op_state = A_SUSPEND;
-			}
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			hprt0.b.prtsusp = 1;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			//DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
-			/* Suspend the Phy Clock */
-			{
-				pcgcctl_data_t pcgcctl = {.d32=0};
-				pcgcctl.b.stoppclk = 1;
-				dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
-			}
-
-			/* For HNP the bus must be suspended for at least 200ms. */
-			if (hcd->self.b_hnp_enable) {
-				mdelay(200);
-				//DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
-			}
-			break;
-		case USB_PORT_FEAT_POWER:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			hprt0.b.prtpwr = 1;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			break;
-		case USB_PORT_FEAT_RESET:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "SetPortFeature - USB_PORT_FEAT_RESET\n");
-			hprt0.d32 = dwc_otg_read_hprt0(core_if);
-			/* When B-Host the Port reset bit is set in
-			 * the Start HCD Callback function, so that
-			 * the reset is started within 1ms of the HNP
-			 * success interrupt. */
-			if (!hcd->self.is_b_host) {
-				hprt0.b.prtrst = 1;
-				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			}
-			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-			MDELAY(60);
-			hprt0.b.prtrst = 0;
-			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			break;
-
-#ifdef DWC_HS_ELECT_TST
-		case USB_PORT_FEAT_TEST:
-		{
-			uint32_t t;
-			gintmsk_data_t gintmsk;
-
-			t = (wIndex >> 8); /* MSB wIndex USB */
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
-			warn("USB_PORT_FEAT_TEST %d\n", t);
-			if (t < 6) {
-				hprt0.d32 = dwc_otg_read_hprt0(core_if);
-				hprt0.b.prttstctl = t;
-				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-			} else {
-				/* Setup global vars with reg addresses (quick and
-				 * dirty hack, should be cleaned up)
-				 */
-				global_regs = core_if->core_global_regs;
-				hc_global_regs = core_if->host_if->host_global_regs;
-				hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
-				data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
-				if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
-					/* Save current interrupt mask */
-					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
-					/* Disable all interrupts while we muck with
-					 * the hardware directly
-					 */
-					dwc_write_reg32(&global_regs->gintmsk, 0);
-
-					/* 15 second delay per the test spec */
-					mdelay(15000);
-
-					/* Drive suspend on the root port */
-					hprt0.d32 = dwc_otg_read_hprt0(core_if);
-					hprt0.b.prtsusp = 1;
-					hprt0.b.prtres = 0;
-					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
-					/* 15 second delay per the test spec */
-					mdelay(15000);
-
-					/* Drive resume on the root port */
-					hprt0.d32 = dwc_otg_read_hprt0(core_if);
-					hprt0.b.prtsusp = 0;
-					hprt0.b.prtres = 1;
-					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-					mdelay(100);
-
-					/* Clear the resume bit */
-					hprt0.b.prtres = 0;
-					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
-					/* Restore interrupts */
-					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-				} else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-					/* Save current interrupt mask */
-					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
-					/* Disable all interrupts while we muck with
-					 * the hardware directly
-					 */
-					dwc_write_reg32(&global_regs->gintmsk, 0);
-
-					/* 15 second delay per the test spec */
-					mdelay(15000);
-
-					/* Send the Setup packet */
-					do_setup();
-
-					/* 15 second delay so nothing else happens for awhile */
-					mdelay(15000);
-
-					/* Restore interrupts */
-					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-				} else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-					/* Save current interrupt mask */
-					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
-					/* Disable all interrupts while we muck with
-					 * the hardware directly
-					 */
-					dwc_write_reg32(&global_regs->gintmsk, 0);
-
-					/* Send the Setup packet */
-					do_setup();
-
-					/* 15 second delay so nothing else happens for awhile */
-					mdelay(15000);
-
-					/* Send the In and Ack packets */
-					do_in_ack();
-
-					/* 15 second delay so nothing else happens for awhile */
-					mdelay(15000);
-
-					/* Restore interrupts */
-					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-				}
-			}
-			break;
-		}
-#endif /* DWC_HS_ELECT_TST */
-
-		case USB_PORT_FEAT_INDICATOR:
-			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-			/* Not supported */
-			break;
-		default:
-			retval = -EINVAL;
-			DWC_ERROR("DWC OTG HCD - "
-				  "SetPortFeature request %xh "
-				  "unknown or unsupported\n", wValue);
-			break;
-		}
-		break;
-	default:
-	error:
-		retval = -EINVAL;
-		DWC_WARN("DWC OTG HCD - "
-			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-			 typeReq, wIndex, wValue);
-		break;
-	}
-
-	return retval;
-}
-
-/**
- * Assigns transactions from a QTD to a free host channel and initializes the
- * host channel to perform the transactions. The host channel is removed from
- * the free list.
- *
- * @param hcd The HCD state structure.
- * @param qh Transactions from the first QTD for this QH are selected and
- * assigned to a free host channel.
- */
-static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	dwc_hc_t	*hc;
-	dwc_otg_qtd_t	*qtd;
-	struct urb	*urb;
-
-	DWC_DEBUGPL(DBG_HCD_FLOOD, "%s(%p,%p)\n", __func__, hcd, qh);
-	hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-
-	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-	urb = qtd->urb;
-
-	if (!urb){
-		return;
-	}
-
-	/* Remove the host channel from the free list. */
-	list_del_init(&hc->hc_list_entry);
-
-	qh->channel = hc;
-	qh->qtd_in_process = qtd;
-
-	/*
-	 * Use usb_pipedevice to determine device address. This address is
-	 * 0 before the SET_ADDRESS command and the correct address afterward.
-	 */
-	hc->dev_addr = usb_pipedevice(urb->pipe);
-	hc->ep_num = usb_pipeendpoint(urb->pipe);
-
-	if (urb->dev->speed == USB_SPEED_LOW) {
-		hc->speed = DWC_OTG_EP_SPEED_LOW;
-	} else if (urb->dev->speed == USB_SPEED_FULL) {
-		hc->speed = DWC_OTG_EP_SPEED_FULL;
-	} else {
-		hc->speed = DWC_OTG_EP_SPEED_HIGH;
-	}
-
-	hc->max_packet = dwc_max_packet(qh->maxp);
-
-	hc->xfer_started = 0;
-	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
-	hc->error_state = (qtd->error_count > 0);
-	hc->halt_on_queue = 0;
-	hc->halt_pending = 0;
-	hc->requests = 0;
-
-	/*
-	 * The following values may be modified in the transfer type section
-	 * below. The xfer_len value may be reduced when the transfer is
-	 * started to accommodate the max widths of the XferSize and PktCnt
-	 * fields in the HCTSIZn register.
-	 */
-	hc->do_ping = qh->ping_state;
-	hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
-	hc->data_pid_start = qh->data_toggle;
-	hc->multi_count = 1;
-
-	if (hcd->core_if->dma_enable) {
-		hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
-	} else {
-		hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
-	}
-	hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
-	hc->xfer_count = 0;
-
-	/*
-	 * Set the split attributes
-	 */
-	hc->do_split = 0;
-	if (qh->do_split) {
-		hc->do_split = 1;
-		hc->xact_pos = qtd->isoc_split_pos;
-		hc->complete_split = qtd->complete_split;
-		hc->hub_addr = urb->dev->tt->hub->devnum;
-		hc->port_addr = urb->dev->ttport;
-	}
-
-	switch (usb_pipetype(urb->pipe)) {
-	case PIPE_CONTROL:
-		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
-		switch (qtd->control_phase) {
-		case DWC_OTG_CONTROL_SETUP:
-			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
-			hc->do_ping = 0;
-			hc->ep_is_in = 0;
-			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
-			if (hcd->core_if->dma_enable) {
-				hc->xfer_buff = (uint8_t *)urb->setup_dma;
-			} else {
-				hc->xfer_buff = (uint8_t *)urb->setup_packet;
-			}
-			hc->xfer_len = 8;
-			break;
-		case DWC_OTG_CONTROL_DATA:
-			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
-			hc->data_pid_start = qtd->data_toggle;
-			break;
-		case DWC_OTG_CONTROL_STATUS:
-			/*
-			 * Direction is opposite of data direction or IN if no
-			 * data.
-			 */
-			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
-			if (urb->transfer_buffer_length == 0) {
-				hc->ep_is_in = 1;
-			} else {
-				hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
-			}
-			if (hc->ep_is_in) {
-				hc->do_ping = 0;
-			}
-			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-			hc->xfer_len = 0;
-			if (hcd->core_if->dma_enable) {
-				hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
-			} else {
-				hc->xfer_buff = (uint8_t *)hcd->status_buf;
-			}
-			break;
-		}
-		break;
-	case PIPE_BULK:
-		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
-		break;
-	case PIPE_INTERRUPT:
-		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
-		break;
-	case PIPE_ISOCHRONOUS:
-		{
-			struct usb_iso_packet_descriptor *frame_desc;
-			frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
-			if (hcd->core_if->dma_enable) {
-				hc->xfer_buff = (uint8_t *)urb->transfer_dma;
-			} else {
-				hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
-			}
-			hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
-			hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-
-			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-				if (hc->xfer_len <= 188) {
-					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
-				}
-				else {
-					hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
-				}
-			}
-		}
-		break;
-	}
-
-	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-		/*
-		 * This value may be modified when the transfer is started to
-		 * reflect the actual transfer length.
-		 */
-		hc->multi_count = dwc_hb_mult(qh->maxp);
-	}
-
-	dwc_otg_hc_init(hcd->core_if, hc);
-	hc->qh = qh;
-}
-
-/**
- * This function selects transactions from the HCD transfer schedule and
- * assigns them to available host channels. It is called from HCD interrupt
- * handler functions.
- *
- * @param hcd The HCD state structure.
- *
- * @return The types of new transactions that were assigned to host channels.
- */
-dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
-{
-	struct list_head 		*qh_ptr;
-	dwc_otg_qh_t 			*qh = NULL;
-	int				num_channels;
-	dwc_otg_transaction_type_e	ret_val = DWC_OTG_TRANSACTION_NONE;
-	uint16_t      cur_frame = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-	unsigned long flags;
-	int include_nakd, channels_full;
-	/* This condition has once been observed, but the cause was
-	 * never determined. Check for it here, to collect debug data if
-	 * it occurs again. */
-	WARN_ON_ONCE(hcd->non_periodic_channels < 0);
-	check_nakking(hcd, __FUNCTION__,  "start");
-
-#ifdef DEBUG_SOF
-	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
-#endif
-
-	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-		/* Process entries in the periodic ready list. */
-	qh_ptr = hcd->periodic_sched_ready.next;
-	while (qh_ptr != &hcd->periodic_sched_ready &&
-	       !list_empty(&hcd->free_hc_list)) {
-
-		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-		assign_and_init_hc(hcd, qh);
-
-		/*
-		 * Move the QH from the periodic ready schedule to the
-		 * periodic assigned schedule.
-		 */
-		qh_ptr = qh_ptr->next;
-		list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
-
-		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
-	}
-
-	/*
-	 * Process entries in the inactive portion of the non-periodic
-	 * schedule. Some free host channels may not be used if they are
-	 * reserved for periodic transfers.
-	 */
-	num_channels = hcd->core_if->core_params->host_channels;
-
-	/* Go over the queue twice: Once while not including nak'd
-	 * entries, one while including them. This is so a retransmit of
-	 * an entry that has received a nak is scheduled only after all
-	 * new entries.
-	 */
-	channels_full = 0;
-	for (include_nakd = 0; include_nakd < 2 && !channels_full; ++include_nakd) {
-	    qh_ptr = hcd->non_periodic_sched_inactive.next;
-	  while (qh_ptr != &hcd->non_periodic_sched_inactive) {
-			qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-			qh_ptr = qh_ptr->next;
-
-			/* If a nak'd frame is in the queue for 100ms, forget
-		 	* about its nak status, to prevent the situation where
-		 	* a nak'd frame never gets resubmitted because there
-		 	* are continously non-nakking tranfsfers available.
-		 	*/
-			if (qh->nak_frame != 0xffff &&
-		    	dwc_frame_num_gt(cur_frame, qh->nak_frame + 800))
-				qh->nak_frame = 0xffff;
-
-			/* In the first pass, ignore NAK'd retransmit
-		 	* alltogether, to give them lower priority. */
-			if (!include_nakd && qh->nak_frame != 0xffff)
-				continue;
-
-			/*
-			* Check to see if this is a NAK'd retransmit, in which case ignore for retransmission
-			* we hold off on bulk retransmissions to reduce NAK interrupt overhead for
-			* cheeky devices that just hold off using NAKs
-			*/
-			if (dwc_full_frame_num(qh->nak_frame) == dwc_full_frame_num(dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd))))
-				continue;
-
-			/* Ok, we found a candidate for scheduling. Is there a
-		 	* free channel? */
-			if (hcd->non_periodic_channels >=
-		    	num_channels - hcd->periodic_channels ||
-	            	list_empty(&hcd->free_hc_list)) {
-				channels_full = 1;
-				break;
-			}
-
-			/* When retrying a NAK'd transfer, we give it a fair
-		 	* chance of completing again. */
-			qh->nak_frame = 0xffff;
-			assign_and_init_hc(hcd, qh);
-
-			/*
-		 	* Move the QH from the non-periodic inactive schedule to the
-		 	* non-periodic active schedule.
-		 	*/
-			list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
-
-			if (ret_val == DWC_OTG_TRANSACTION_NONE) {
-				ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
-			} else {
-				ret_val = DWC_OTG_TRANSACTION_ALL;
-			}
-
-			hcd->non_periodic_channels++;
-		}
-		if (hcd->core_if->dma_enable && channels_full &&
-			  hcd->periodic_channels + hcd->nakking_channels >= num_channels) {
-			/* There are items queued, but all channels are either
-			 * reserved for periodic or have received NAKs. This
-			 * means that it could take an indefinite amount of time
-			 * before a channel is actually freed (since in DMA
-			 * mode, the hardware takes care of retries), so we take
-			 * action here by forcing a nakking channel to halt to
-			 * give other transfers a chance to run. */
-			dwc_otg_qtd_t *qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-			struct urb *urb = qtd->urb;
-			dwc_hc_t *hc = dwc_otg_halt_nakking_channel(hcd);
-
-			if (hc)
-			  DWC_DEBUGPL(DBG_HCD "Out of Host Channels for non-periodic transfer - Halting channel %d (dev %d ep%d%s) to service qh %p (dev %d ep%d%s)\n", hc->hc_num, hc->dev_addr, hc->ep_num, (hc->ep_is_in ? "in" : "out"), qh, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), (usb_pipein(urb->pipe) != 0) ? "in" : "out");
-
-		}
-	}
-
-	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-
-	return ret_val;
-}
-
-/**
- * Halt a bulk channel that is blocking on NAKs to free up space.
- *
- * This will decrement hcd->nakking_channels immediately, but
- * hcd->non_periodic_channels is not decremented until the channel is
- * actually halted.
- *
- * Returns the halted channel.
- */
-dwc_hc_t *dwc_otg_halt_nakking_channel(dwc_otg_hcd_t *hcd) {
- int num_channels, i;
- uint16_t cur_frame;
-
- cur_frame = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
- num_channels = hcd->core_if->core_params->host_channels;
-
- for (i = 0; i < num_channels; i++) {
-   int channel = (hcd->last_channel_halted + 1 + i) % num_channels;
-   dwc_hc_t *hc = hcd->hc_ptr_array[channel];
-   if (hc->xfer_started
-       && !hc->halt_on_queue
-       && !hc->halt_pending
-       && hc->qh->nak_frame != 0xffff) {
-     dwc_otg_hc_halt(hcd, hc, DWC_OTG_HC_XFER_NAK);
-     /* Store the last channel halted to
-      * fairly rotate the channel to halt.
-      * This prevent the scenario where there
-      * are three blocking endpoints and only
-      * two free host channels, where the
-      * blocking endpoint that gets hc 3 will
-      * never be halted, while the other two
-      * endpoints will be fighting over the
-      * other host channel. */
-     hcd->last_channel_halted = channel;
-     /* Update nak_frame, so this frame is
-      * kept at low priority for a period of
-      * time starting now. */
-     hc->qh->nak_frame = cur_frame;
-     return hc;
-   }
- }
- dwc_otg_hcd_dump_state(hcd);
- return NULL;
-}
-
-/**
- * Attempts to queue a single transaction request for a host channel
- * associated with either a periodic or non-periodic transfer. This function
- * assumes that there is space available in the appropriate request queue. For
- * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
- * is available in the appropriate Tx FIFO.
- *
- * @param hcd The HCD state structure.
- * @param hc Host channel descriptor associated with either a periodic or
- * non-periodic transfer.
- * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
- * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
- * transfers.
- *
- * @return 1 if a request is queued and more requests may be needed to
- * complete the transfer, 0 if no more requests are required for this
- * transfer, -1 if there is insufficient space in the Tx FIFO.
- */
-static int queue_transaction(dwc_otg_hcd_t *hcd,
-			     dwc_hc_t *hc,
-			     uint16_t fifo_dwords_avail)
-{
-	int retval;
-
-	if (hcd->core_if->dma_enable) {
-		if (!hc->xfer_started) {
-			dwc_otg_hc_start_transfer(hcd->core_if, hc);
-			hc->qh->ping_state = 0;
-		}
-		retval = 0;
-	} else if (hc->halt_pending) {
-		/* Don't queue a request if the channel has been halted. */
-		retval = 0;
-	} else if (hc->halt_on_queue) {
-		dwc_otg_hc_halt(hcd, hc, hc->halt_status);
-		retval = 0;
-	} else if (hc->do_ping) {
-		if (!hc->xfer_started) {
-			dwc_otg_hc_start_transfer(hcd->core_if, hc);
-		}
-		retval = 0;
-	} else if (!hc->ep_is_in ||
-		   hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
-			if (!hc->xfer_started) {
-				dwc_otg_hc_start_transfer(hcd->core_if, hc);
-				retval = 1;
-			} else {
-				retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-			}
-		} else {
-			retval = -1;
-		}
-	} else {
-		if (!hc->xfer_started) {
-			dwc_otg_hc_start_transfer(hcd->core_if, hc);
-			retval = 1;
-		} else {
-			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-		}
-	}
-
-	return retval;
-}
-
-/**
- * Processes active non-periodic channels and queues transactions for these
- * channels to the DWC_otg controller. After queueing transactions, the NP Tx
- * FIFO Empty interrupt is enabled if there are more transactions to queue as
- * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
- * FIFO Empty interrupt is disabled.
- */
-static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
-{
-	gnptxsts_data_t		tx_status;
-	struct list_head	*orig_qh_ptr;
-	dwc_otg_qh_t		*qh;
-	int			status;
-	int			no_queue_space = 0;
-	int			no_fifo_space = 0;
-	int			more_to_do = 0;
-
-	dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
-
-	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-#ifdef DEBUG
-	tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-	DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (before queue): %d\n",
-		    tx_status.b.nptxqspcavail);
-	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
-		    tx_status.b.nptxfspcavail);
-#endif
-	/*
-	 * Keep track of the starting point. Skip over the start-of-list
-	 * entry.
-	 */
-	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-	}
-	orig_qh_ptr = hcd->non_periodic_qh_ptr;
-
-	/*
-	 * Process once through the active list or until no more space is
-	 * available in the request queue or the Tx FIFO.
-	 */
-	do {
-		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
-			no_queue_space = 1;
-			break;
-		}
-
-		qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
-		status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
-
-		if (status > 0) {
-			more_to_do = 1;
-		} else if (status < 0) {
-			no_fifo_space = 1;
-			break;
-		}
-
-		/* Advance to next QH, skipping start-of-list entry. */
-		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-		}
-
-	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
-
-	if (!hcd->core_if->dma_enable) {
-		gintmsk_data_t intr_mask = {.d32 = 0};
-		intr_mask.b.nptxfempty = 1;
-
-#ifdef DEBUG
-		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-		DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (after queue): %d\n",
-			    tx_status.b.nptxqspcavail);
-		DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (after queue): %d\n",
-			    tx_status.b.nptxfspcavail);
-#endif
-		if (more_to_do || no_queue_space || no_fifo_space) {
-			/*
-			 * May need to queue more transactions as the request
-			 * queue or Tx FIFO empties. Enable the non-periodic
-			 * Tx FIFO empty interrupt. (Always use the half-empty
-			 * level to ensure that new requests are loaded as
-			 * soon as possible.)
-			 */
-			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-		} else {
-			/*
-			 * Disable the Tx FIFO empty interrupt since there are
-			 * no more transactions that need to be queued right
-			 * now. This function is called from interrupt
-			 * handlers to queue more transactions as transfer
-			 * states change.
-			 */
-			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-		}
-	}
-}
-
-/**
- * Processes periodic channels for the next frame and queues transactions for
- * these channels to the DWC_otg controller. After queueing transactions, the
- * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
- * to queue as Periodic Tx FIFO or request queue space becomes available.
- * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
- */
-static void process_periodic_channels(dwc_otg_hcd_t *hcd)
-{
-	hptxsts_data_t		tx_status;
-	struct list_head	*qh_ptr;
-	dwc_otg_qh_t		*qh;
-	int			status;
-	int 			no_queue_space = 0;
-	int			no_fifo_space = 0;
-
-	dwc_otg_host_global_regs_t *host_regs;
-	host_regs = hcd->core_if->host_if->host_global_regs;
-
-	DWC_DEBUGPL(DBG_HCD_FLOOD, "Queue periodic transactions\n");
-#ifdef DEBUG
-	tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-	DWC_DEBUGPL(DBG_HCD_FLOOD, "  P Tx Req Queue Space Avail (before queue): %d\n",
-		    tx_status.b.ptxqspcavail);
-	DWC_DEBUGPL(DBG_HCD_FLOOD, "  P Tx FIFO Space Avail (before queue): %d\n",
-		    tx_status.b.ptxfspcavail);
-#endif
-
-	qh_ptr = hcd->periodic_sched_assigned.next;
-	while (qh_ptr != &hcd->periodic_sched_assigned) {
-		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-		if (tx_status.b.ptxqspcavail == 0) {
-			no_queue_space = 1;
-			break;
-		}
-
-		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-
-		/*
-		 * Set a flag if we're queuing high-bandwidth in slave mode.
-		 * The flag prevents any halts to get into the request queue in
-		 * the middle of multiple high-bandwidth packets getting queued.
-		 */
-		if (!hcd->core_if->dma_enable &&
-		    qh->channel->multi_count > 1)
-		{
-			hcd->core_if->queuing_high_bandwidth = 1;
-		}
-
-		status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
-		if (status < 0) {
-			no_fifo_space = 1;
-			break;
-		}
-
-		/*
-		 * In Slave mode, stay on the current transfer until there is
-		 * nothing more to do or the high-bandwidth request count is
-		 * reached. In DMA mode, only need to queue one request. The
-		 * controller automatically handles multiple packets for
-		 * high-bandwidth transfers.
-		 */
-		if (hcd->core_if->dma_enable || status == 0 ||
-		    qh->channel->requests == qh->channel->multi_count) {
-			qh_ptr = qh_ptr->next;
-			/*
-			 * Move the QH from the periodic assigned schedule to
-			 * the periodic queued schedule.
-			 */
-			list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
-
-			/* done queuing high bandwidth */
-			hcd->core_if->queuing_high_bandwidth = 0;
-		}
-	}
-
-	if (!hcd->core_if->dma_enable) {
-		dwc_otg_core_global_regs_t *global_regs;
-		gintmsk_data_t intr_mask = {.d32 = 0};
-
-		global_regs = hcd->core_if->core_global_regs;
-		intr_mask.b.ptxfempty = 1;
-#ifdef DEBUG
-		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-		DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (after queue): %d\n",
-			    tx_status.b.ptxqspcavail);
-		DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (after queue): %d\n",
-			    tx_status.b.ptxfspcavail);
-#endif
-		if (!list_empty(&hcd->periodic_sched_assigned) ||
-		    no_queue_space || no_fifo_space) {
-			/*
-			 * May need to queue more transactions as the request
-			 * queue or Tx FIFO empties. Enable the periodic Tx
-			 * FIFO empty interrupt. (Always use the half-empty
-			 * level to ensure that new requests are loaded as
-			 * soon as possible.)
-			 */
-			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-		} else {
-			/*
-			 * Disable the Tx FIFO empty interrupt since there are
-			 * no more transactions that need to be queued right
-			 * now. This function is called from interrupt
-			 * handlers to queue more transactions as transfer
-			 * states change.
-			 */
-			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-		}
-	}
-}
-
-/**
- * This function processes the currently active host channels and queues
- * transactions for these channels to the DWC_otg controller. It is called
- * from HCD interrupt handler functions.
- *
- * @param hcd The HCD state structure.
- * @param tr_type The type(s) of transactions to queue (non-periodic,
- * periodic, or both).
- */
-void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-				    dwc_otg_transaction_type_e tr_type)
-{
-#ifdef DEBUG_SOF
-	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-#endif
-	/* Process host channels associated with periodic transfers. */
-	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
-	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
-	    !list_empty(&hcd->periodic_sched_assigned)) {
-
-		process_periodic_channels(hcd);
-	}
-
-	/* Process host channels associated with non-periodic transfers. */
-	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
-	    tr_type == DWC_OTG_TRANSACTION_ALL) {
-		if (!list_empty(&hcd->non_periodic_sched_active)) {
-			process_non_periodic_channels(hcd);
-		} else {
-			/*
-			 * Ensure NP Tx FIFO empty interrupt is disabled when
-			 * there are no non-periodic transfers to process.
-			 */
-			gintmsk_data_t gintmsk = {.d32 = 0};
-			gintmsk.b.nptxfempty = 1;
-			dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
-					 gintmsk.d32, 0);
-		}
-	}
-}
-
-/**
- * Sets the final status of an URB and returns it to the device driver. Any
- * required cleanup of the URB is performed.
- */
-void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
-{
-	unsigned long		flags;
-
-	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-
-#ifdef DEBUG
-
-	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-		DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
-			  __func__, urb, usb_pipedevice(urb->pipe),
-			  usb_pipeendpoint(urb->pipe),
-			  usb_pipein(urb->pipe) ? "IN" : "OUT", status);
-		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-			int i;
-			for (i = 0; i < urb->number_of_packets; i++) {
-				DWC_PRINT("  ISO Desc %d status: %d\n",
-					  i, urb->iso_frame_desc[i].status);
-			}
-		}
-	}
-#endif
-
-	//if we use the aligned buffer instead of the original unaligned buffer,
-	//for IN data, we have to move the data to the original buffer
-	if((urb->transfer_dma==urb->aligned_transfer_dma)&&((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_IN)){
-		dma_sync_single_for_device(NULL,urb->transfer_dma,urb->actual_length,DMA_FROM_DEVICE);
-		memcpy(urb->transfer_buffer,urb->aligned_transfer_buffer,urb->actual_length);
-	}
-
-	usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
-	urb->status = status;
-	urb->hcpriv = NULL;
-	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
-
-}
-
-/*
- * Returns the Queue Head for an URB.
- */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
-{
-	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-	return (dwc_otg_qh_t *)ep->hcpriv;
-}
-
-#ifdef DEBUG
-void dwc_print_setup_data(uint8_t *setup)
-{
-	int i;
-	if (CHK_DEBUG_LEVEL(DBG_HCD)){
-		DWC_PRINT("Setup Data = MSB ");
-		for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
-		DWC_PRINT("\n");
-		DWC_PRINT("  bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
-		DWC_PRINT("  bmRequestType Type = ");
-		switch ((setup[0] & 0x60) >> 5) {
-		case 0: DWC_PRINT("Standard\n"); break;
-		case 1:	DWC_PRINT("Class\n"); break;
-		case 2:	DWC_PRINT("Vendor\n"); break;
-		case 3: DWC_PRINT("Reserved\n"); break;
-		}
-		DWC_PRINT("  bmRequestType Recipient = ");
-		switch (setup[0] & 0x1f) {
-		case 0: DWC_PRINT("Device\n"); break;
-		case 1: DWC_PRINT("Interface\n"); break;
-		case 2: DWC_PRINT("Endpoint\n"); break;
-		case 3: DWC_PRINT("Other\n"); break;
-		default: DWC_PRINT("Reserved\n"); break;
-		}
-		DWC_PRINT("  bRequest = 0x%0x\n", setup[1]);
-		DWC_PRINT("  wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
-		DWC_PRINT("  wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
-		DWC_PRINT("  wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
-	}
-}
-#endif
-
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
-}
-
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
-{
-#ifdef DEBUG
-	int num_channels;
-	int i;
-	gnptxsts_data_t	np_tx_status;
-	hptxsts_data_t p_tx_status;
-
-	num_channels = hcd->core_if->core_params->host_channels;
-	DWC_PRINT("\n");
-	DWC_PRINT("************************************************************\n");
-	DWC_PRINT("HCD State:\n");
-	DWC_PRINT("  Num channels: %d\n", num_channels);
-	for (i = 0; i < num_channels; i++) {
-		dwc_hc_t *hc = hcd->hc_ptr_array[i];
-		DWC_PRINT("  Channel %d: %p\n", i, hc);
-		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
-		DWC_PRINT("    speed: %d\n", hc->speed);
-		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
-		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
-		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
-		DWC_PRINT("    multi_count: %d\n", hc->multi_count);
-		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
-		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
-		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
-		DWC_PRINT("    xfer_count: %d\n", hc->xfer_count);
-		DWC_PRINT("    halt_on_queue: %d\n", hc->halt_on_queue);
-		DWC_PRINT("    halt_pending: %d\n", hc->halt_pending);
-		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
-		DWC_PRINT("    do_split: %d\n", hc->do_split);
-		DWC_PRINT("    complete_split: %d\n", hc->complete_split);
-		DWC_PRINT("    hub_addr: %d\n", hc->hub_addr);
-		DWC_PRINT("    port_addr: %d\n", hc->port_addr);
-		DWC_PRINT("    xact_pos: %d\n", hc->xact_pos);
-		DWC_PRINT("    requests: %d\n", hc->requests);
-		DWC_PRINT("    qh: %p\n", hc->qh);
-		if (hc->qh)
-			DWC_PRINT("    nak_frame: %x\n", hc->qh->nak_frame);
-		if (hc->xfer_started) {
-			hfnum_data_t hfnum;
-			hcchar_data_t hcchar;
-			hctsiz_data_t hctsiz;
-			hcint_data_t hcint;
-			hcintmsk_data_t hcintmsk;
-			hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-			hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
-			hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
-			hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
-			hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
-			DWC_PRINT("    hfnum: 0x%08x\n", hfnum.d32);
-			DWC_PRINT("    hcchar: 0x%08x\n", hcchar.d32);
-			DWC_PRINT("    hctsiz: 0x%08x\n", hctsiz.d32);
-			DWC_PRINT("    hcint: 0x%08x\n", hcint.d32);
-			DWC_PRINT("    hcintmsk: 0x%08x\n", hcintmsk.d32);
-		}
-		if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
-			dwc_otg_qtd_t *qtd;
-			struct urb *urb;
-			qtd = hc->qh->qtd_in_process;
-			urb = qtd->urb;
-			DWC_PRINT("    URB Info:\n");
-			DWC_PRINT("      qtd: %p, urb: %p\n", qtd, urb);
-			if (urb) {
-				DWC_PRINT("      Dev: %d, EP: %d %s\n",
-					  usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
-					  usb_pipein(urb->pipe) ? "IN" : "OUT");
-				DWC_PRINT("      Max packet size: %d\n",
-					  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-				DWC_PRINT("      transfer_buffer: %p\n", urb->transfer_buffer);
-				DWC_PRINT("      transfer_dma: %p\n", (void *)urb->transfer_dma);
-				DWC_PRINT("      transfer_buffer_length: %d\n", urb->transfer_buffer_length);
-				DWC_PRINT("      actual_length: %d\n", urb->actual_length);
-			}
-		}
-	}
-	DWC_PRINT("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
-	DWC_PRINT("  periodic_channels: %d\n", hcd->periodic_channels);
-	DWC_PRINT("  nakking_channels: %d\n", hcd->nakking_channels);
-	DWC_PRINT("  last_channel_halted: %d\n", hcd->last_channel_halted);
-	DWC_PRINT("  periodic_usecs: %d\n", hcd->periodic_usecs);
-	np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
-	DWC_PRINT("  NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
-	DWC_PRINT("  NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
-	p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
-	DWC_PRINT("  P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
-	DWC_PRINT("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
-	dwc_otg_hcd_dump_frrem(hcd);
-	dwc_otg_dump_global_registers(hcd->core_if);
-	dwc_otg_dump_host_registers(hcd->core_if);
-	DWC_PRINT("************************************************************\n");
-	DWC_PRINT("\n");
-#endif
-}
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.h
deleted file mode 100644
index cef2879..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd.h
+++ /dev/null
@@ -1,708 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
- * $Revision: #45 $
- * $Date: 2008/07/15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-#ifndef __DWC_HCD_H__
-#define __DWC_HCD_H__
-
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-struct dwc_otg_device;
-
-#include "otg_cil.h"
-
-/**
- * @file
- *
- * This file contains the structures, constants, and interfaces for
- * the Host Contoller Driver (HCD).
- *
- * The Host Controller Driver (HCD) is responsible for translating requests
- * from the USB Driver into the appropriate actions on the DWC_otg controller.
- * It isolates the USBD from the specifics of the controller by providing an
- * API to the USBD.
- */
-
-/**
- * Phases for control transfers.
- */
-typedef enum dwc_otg_control_phase {
-	DWC_OTG_CONTROL_SETUP,
-	DWC_OTG_CONTROL_DATA,
-	DWC_OTG_CONTROL_STATUS
-} dwc_otg_control_phase_e;
-
-/** Transaction types. */
-typedef enum dwc_otg_transaction_type {
-	DWC_OTG_TRANSACTION_NONE,
-	DWC_OTG_TRANSACTION_PERIODIC,
-	DWC_OTG_TRANSACTION_NON_PERIODIC,
-	DWC_OTG_TRANSACTION_ALL
-} dwc_otg_transaction_type_e;
-
-/**
- * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
- * interrupt, or isochronous transfer. A single QTD is created for each URB
- * (of one of these types) submitted to the HCD. The transfer associated with
- * a QTD may require one or multiple transactions.
- *
- * A QTD is linked to a Queue Head, which is entered in either the
- * non-periodic or periodic schedule for execution. When a QTD is chosen for
- * execution, some or all of its transactions may be executed. After
- * execution, the state of the QTD is updated. The QTD may be retired if all
- * its transactions are complete or if an error occurred. Otherwise, it
- * remains in the schedule so more transactions can be executed later.
- */
-typedef struct dwc_otg_qtd {
-	/**
-	 * Determines the PID of the next data packet for the data phase of
-	 * control transfers. Ignored for other transfer types.<br>
-	 * One of the following values:
-	 *	- DWC_OTG_HC_PID_DATA0
-	 *	- DWC_OTG_HC_PID_DATA1
-	 */
-	uint8_t			data_toggle;
-
-	/** Current phase for control transfers (Setup, Data, or Status). */
-	dwc_otg_control_phase_e	control_phase;
-
-	/** Keep track of the current split type
-	 * for FS/LS endpoints on a HS Hub */
-	uint8_t			complete_split;
-
-	/** How many bytes transferred during SSPLIT OUT */
-	uint32_t		ssplit_out_xfer_count;
-
-	/**
-	 * Holds the number of bus errors that have occurred for a transaction
-	 * within this transfer.
-	 */
-	uint8_t			error_count;
-
-	/**
-	 * Index of the next frame descriptor for an isochronous transfer. A
-	 * frame descriptor describes the buffer position and length of the
-	 * data to be transferred in the next scheduled (micro)frame of an
-	 * isochronous transfer. It also holds status for that transaction.
-	 * The frame index starts at 0.
-	 */
-	int			isoc_frame_index;
-
-	/** Position of the ISOC split on full/low speed */
-	uint8_t			isoc_split_pos;
-
-	/** Position of the ISOC split in the buffer for the current frame */
-	uint16_t		isoc_split_offset;
-
-	/** URB for this transfer */
-	struct urb		*urb;
-
-	/** This list of QTDs */
-	struct list_head	qtd_list_entry;
-
-} dwc_otg_qtd_t;
-
-/**
- * A Queue Head (QH) holds the static characteristics of an endpoint and
- * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
- * be entered in either the non-periodic or periodic schedule.
- */
-typedef struct dwc_otg_qh {
-	/**
-	 * Endpoint type.
-	 * One of the following values:
-	 *	- USB_ENDPOINT_XFER_CONTROL
-	 *	- USB_ENDPOINT_XFER_ISOC
-	 *	- USB_ENDPOINT_XFER_BULK
-	 *	- USB_ENDPOINT_XFER_INT
-	 */
-	uint8_t			ep_type;
-	uint8_t			ep_is_in;
-
-	/** wMaxPacketSize Field of Endpoint Descriptor. */
-	uint16_t		maxp;
-
-	/**
-	 * Determines the PID of the next data packet for non-control
-	 * transfers. Ignored for control transfers.<br>
-	 * One of the following values:
-	 *	- DWC_OTG_HC_PID_DATA0
-	 *	- DWC_OTG_HC_PID_DATA1
-	 */
-	uint8_t			data_toggle;
-
-	/** Ping state if 1. */
-	uint8_t			ping_state;
-
-	/**
-	 * List of QTDs for this QH.
-	 */
-	struct list_head	qtd_list;
-
-	/** Host channel currently processing transfers for this QH. */
-	dwc_hc_t		*channel;
-
-	/** QTD currently assigned to a host channel for this QH. */
-	dwc_otg_qtd_t		*qtd_in_process;
-
-	/** Full/low speed endpoint on high-speed hub requires split. */
-	uint8_t			do_split;
-
-	/** @name Periodic schedule information */
-	/** @{ */
-
-	/** Bandwidth in microseconds per (micro)frame. */
-	uint8_t			usecs;
-
-	/** Interval between transfers in (micro)frames. */
-	uint16_t		interval;
-
-	/**
-	 * (micro)frame to initialize a periodic transfer. The transfer
-	 * executes in the following (micro)frame.
-	 */
-	uint16_t		sched_frame;
-
-	/*
-	 * Frame a NAK was received on this queue head, used to minimise NAK retransmission
-	 */
-	uint16_t nak_frame;
-
-	/** (micro)frame at which last start split was initialized. */
-	uint16_t		start_split_frame;
-
-	u16 speed;
-	u16 frame_usecs[8];
-
-	/** @} */
-
-	/** Entry for QH in either the periodic or non-periodic schedule. */
-	struct list_head	qh_list_entry;
-} dwc_otg_qh_t;
-
-/**
- * This structure holds the state of the HCD, including the non-periodic and
- * periodic schedules.
- */
-typedef struct dwc_otg_hcd {
-	/** The DWC otg device pointer */
-	struct dwc_otg_device	*otg_dev;
-
-	/** DWC OTG Core Interface Layer */
-	dwc_otg_core_if_t	*core_if;
-
-	/** Internal DWC HCD Flags */
-	volatile union dwc_otg_hcd_internal_flags {
-		uint32_t d32;
-		struct {
-			unsigned port_connect_status_change : 1;
-			unsigned port_connect_status : 1;
-			unsigned port_reset_change : 1;
-			unsigned port_enable_change : 1;
-			unsigned port_suspend_change : 1;
-			unsigned port_over_current_change : 1;
-			unsigned reserved : 27;
-		} b;
-	} flags;
-
-	/**
-	 * Inactive items in the non-periodic schedule. This is a list of
-	 * Queue Heads. Transfers associated with these Queue Heads are not
-	 * currently assigned to a host channel.
-	 */
-	struct list_head	non_periodic_sched_inactive;
-
-	/**
-	 * Active items in the non-periodic schedule. This is a list of
-	 * Queue Heads. Transfers associated with these Queue Heads are
-	 * currently assigned to a host channel.
-	 */
-	struct list_head	non_periodic_sched_active;
-
-	/**
-	 * Pointer to the next Queue Head to process in the active
-	 * non-periodic schedule.
-	 */
-	struct list_head	*non_periodic_qh_ptr;
-
-	/**
-	 * Inactive items in the periodic schedule. This is a list of QHs for
-	 * periodic transfers that are _not_ scheduled for the next frame.
-	 * Each QH in the list has an interval counter that determines when it
-	 * needs to be scheduled for execution. This scheduling mechanism
-	 * allows only a simple calculation for periodic bandwidth used (i.e.
-	 * must assume that all periodic transfers may need to execute in the
-	 * same frame). However, it greatly simplifies scheduling and should
-	 * be sufficient for the vast majority of OTG hosts, which need to
-	 * connect to a small number of peripherals at one time.
-	 *
-	 * Items move from this list to periodic_sched_ready when the QH
-	 * interval counter is 0 at SOF.
-	 */
-	struct list_head	periodic_sched_inactive;
-
-	/**
-	 * List of periodic QHs that are ready for execution in the next
-	 * frame, but have not yet been assigned to host channels.
-	 *
-	 * Items move from this list to periodic_sched_assigned as host
-	 * channels become available during the current frame.
-	 */
-	struct list_head	periodic_sched_ready;
-
-	/**
-	 * List of periodic QHs to be executed in the next frame that are
-	 * assigned to host channels.
-	 *
-	 * Items move from this list to periodic_sched_queued as the
-	 * transactions for the QH are queued to the DWC_otg controller.
-	 */
-	struct list_head	periodic_sched_assigned;
-
-	/**
-	 * List of periodic QHs that have been queued for execution.
-	 *
-	 * Items move from this list to either periodic_sched_inactive or
-	 * periodic_sched_ready when the channel associated with the transfer
-	 * is released. If the interval for the QH is 1, the item moves to
-	 * periodic_sched_ready because it must be rescheduled for the next
-	 * frame. Otherwise, the item moves to periodic_sched_inactive.
-	 */
-	struct list_head	periodic_sched_queued;
-
-	/**
-	 * Total bandwidth claimed so far for periodic transfers. This value
-	 * is in microseconds per (micro)frame. The assumption is that all
-	 * periodic transfers may occur in the same (micro)frame.
-	 */
-	uint16_t		periodic_usecs;
-
-	/*
-	 * Total bandwidth claimed so far for all periodic transfers
-	 * in a frame.
-	 * This will include a mixture of HS and FS transfers.
-	 * Units are microseconds per (micro)frame.
-	 * We have a budget per frame and have to schedule
-	 * transactions accordingly.
-	 * Watch out for the fact that things are actually scheduled for the
-	 * "next frame".
-	 */
-	u16 frame_usecs[8];
-
-	/**
-	 * Frame number read from the core at SOF. The value ranges from 0 to
-	 * DWC_HFNUM_MAX_FRNUM.
-	 */
-	uint16_t		frame_number;
-
-	/**
-	 * Free host channels in the controller. This is a list of
-	 * dwc_hc_t items.
-	 */
-	struct list_head	free_hc_list;
-
-	/**
-	 * The number of bulk channels in the active schedule that do
-	 * not have a halt pending or queued but received at least one
-	 * nak and thus are probably blocking a host channel.
-	 *
-	 * This number is included in non_perodic_channels as well.
-	 */
-	int nakking_channels;
-
-	/**
-	 * The number of the last host channel that was halted to free
-	 * up a host channel.
-	 */
-	int last_channel_halted;
-
-	/**
-	 * Number of host channels assigned to periodic transfers. Currently
-	 * assuming that there is a dedicated host channel for each periodic
-	 * transaction and at least one host channel available for
-	 * non-periodic transactions.
-	 */
-	int			periodic_channels;
-
-	/**
-	 * Number of host channels assigned to non-periodic transfers.
-	 */
-	int			non_periodic_channels;
-
-	/**
-	 * Array of pointers to the host channel descriptors. Allows accessing
-	 * a host channel descriptor given the host channel number. This is
-	 * useful in interrupt handlers.
-	 */
-	dwc_hc_t		*hc_ptr_array[MAX_EPS_CHANNELS];
-
-	/**
-	 * Buffer to use for any data received during the status phase of a
-	 * control transfer. Normally no data is transferred during the status
-	 * phase. This buffer is used as a bit bucket.
-	 */
-	uint8_t			*status_buf;
-
-	/**
-	 * DMA address for status_buf.
-	 */
-	dma_addr_t		status_buf_dma;
-#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-
-	/**
-	 * Structure to allow starting the HCD in a non-interrupt context
-	 * during an OTG role change.
-	 */
-	struct delayed_work	start_work;
-
-	/**
-	 * Connection timer. An OTG host must display a message if the device
-	 * does not connect. Started when the VBus power is turned on via
-	 * sysfs attribute "buspower".
-	 */
-	struct timer_list	conn_timer;
-
-	/* Tasket to do a reset */
-	struct tasklet_struct	*reset_tasklet;
-
-	/*  */
-	spinlock_t lock;
-
-#ifdef DEBUG
-	uint32_t		frrem_samples;
-	uint64_t		frrem_accum;
-
-	uint32_t		hfnum_7_samples_a;
-	uint64_t		hfnum_7_frrem_accum_a;
-	uint32_t		hfnum_0_samples_a;
-	uint64_t		hfnum_0_frrem_accum_a;
-	uint32_t		hfnum_other_samples_a;
-	uint64_t		hfnum_other_frrem_accum_a;
-
-	uint32_t		hfnum_7_samples_b;
-	uint64_t		hfnum_7_frrem_accum_b;
-	uint32_t		hfnum_0_samples_b;
-	uint64_t		hfnum_0_frrem_accum_b;
-	uint32_t		hfnum_other_samples_b;
-	uint64_t		hfnum_other_frrem_accum_b;
-#endif
-} dwc_otg_hcd_t;
-
-/** Gets the dwc_otg_hcd from a struct usb_hcd */
-static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-{
-	return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-}
-
-/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-}
-
-/** @name HCD Create/Destroy Functions */
-/** @{ */
-extern int dwc_otg_hcd_init(struct platform_device *pdev);
-extern void dwc_otg_hcd_remove(struct platform_device *pdev);
-/** @} */
-
-/** @name Linux HC Driver API Functions */
-/** @{ */
-
-extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-				//   struct usb_host_endpoint *ep,
-				   struct urb *urb,
-				   gfp_t mem_flags
-				  );
-extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-				   struct urb *urb, int status);
-extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-					 struct usb_host_endpoint *ep);
-extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
-				       char *buf);
-extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-				   u16 typeReq,
-				   u16 wValue,
-				   u16 wIndex,
-				   char *buf,
-				   u16 wLength);
-
-/** @} */
-
-/** @name Transaction Execution Functions */
-/** @{ */
-extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
-extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-					   dwc_otg_transaction_type_e tr_type);
-extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
-				     int status);
-extern dwc_hc_t *dwc_otg_halt_nakking_channel(dwc_otg_hcd_t *hcd);
-
-/** @} */
-
-/** @name Interrupt Handler Functions */
-/** @{ */
-extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
-extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-/** @} */
-
-
-/** @name Schedule Queue Functions */
-/** @{ */
-
-/* Implemented in dwc_otg_hcd_queue.c */
-extern int init_hcd_usecs(dwc_otg_hcd_t *hcd);
-extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
-extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
-extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
-
-/** Remove and free a QH */
-static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
-						  dwc_otg_qh_t *qh)
-{
-	dwc_otg_hcd_qh_remove(hcd, qh);
-	dwc_otg_hcd_qh_free(hcd, qh);
-}
-
-/** Allocates memory for a QH structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
-{
-	return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
-}
-
-extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
-extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
-extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-
-/** Allocates memory for a QTD structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
-{
-	return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-}
-
-/** Frees the memory for a QTD structure.  QTD should already be removed from
- * list.
- * @param[in] qtd QTD to free.*/
-static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
-{
-	kfree(qtd);
-}
-
-/** Remove and free a QTD */
-static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-{
-	list_del(&qtd->qtd_list_entry);
-	dwc_otg_hcd_qtd_free(qtd);
-}
-
-/** @} */
-
-
-/** @name Internal Functions */
-/** @{ */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
-/** @} */
-
-/** Gets the usb_host_endpoint associated with an URB. */
-static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
-{
-	struct usb_device *dev = urb->dev;
-	int ep_num = usb_pipeendpoint(urb->pipe);
-
-	if (usb_pipein(urb->pipe))
-		return dev->ep_in[ep_num];
-	else
-		return dev->ep_out[ep_num];
-}
-
-/**
- * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
- * qualified with its direction (possible 32 endpoints per device).
- */
-#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-
-/** Gets the QH that contains the list_head */
-#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
-
-/** Gets the QTD that contains the list_head */
-#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
-
-/** Check if QH is non-periodic  */
-#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
-				     (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-
-/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-
-/** Packet size for any kind of endpoint descriptor */
-#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-
-/**
- * Returns true if _frame1 is less than or equal to _frame2. The comparison is
- * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
- * frame number when the max frame number is reached.
- */
-static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
-{
-	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
-		(DWC_HFNUM_MAX_FRNUM >> 1);
-}
-
-/**
- * Returns true if _frame1 is greater than _frame2. The comparison is done
- * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
- * number when the max frame number is reached.
- */
-static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
-{
-	return (frame1 != frame2) &&
-		(((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
-		 (DWC_HFNUM_MAX_FRNUM >> 1));
-}
-
-/**
- * Increments _frame by the amount specified by _inc. The addition is done
- * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
- */
-static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
-{
-	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
-}
-
-static inline uint16_t dwc_full_frame_num(uint16_t frame)
-{
-	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
-}
-
-static inline uint16_t dwc_micro_frame_num(uint16_t frame)
-{
-	return frame & 0x7;
-}
-
-/* Perform some sanity checks on nakking / non_perodic channel states. */
-static inline int check_nakking(struct dwc_otg_hcd *hcd, const char *func, const char* context) {
-#ifdef DEBUG
-	int nakking = 0, non_periodic = 0, i;
-	int num_channels = hcd->core_if->core_params->host_channels;
-	for (i = 0; i < num_channels; i++) {
-		dwc_hc_t *hc = hcd->hc_ptr_array[i];
-		if (hc->xfer_started
-		    && (hc->ep_type == DWC_OTG_EP_TYPE_BULK
-			|| hc->ep_type == DWC_OTG_EP_TYPE_CONTROL)) {
-				non_periodic++;
-		}
-		if (hc->xfer_started
-		    && !hc->halt_on_queue
-		    && !hc->halt_pending
-		    && hc->qh->nak_frame != 0xffff) {
-			nakking++;
-		}
-	}
-
-	if (nakking != hcd->nakking_channels
-	    || nakking > hcd->non_periodic_channels
-	    || non_periodic != hcd->non_periodic_channels) {
-		printk("%s/%s: Inconsistent nakking state\n", func, context);
-		printk("non_periodic: %d, real %d, nakking: %d, real %d\n", hcd->non_periodic_channels, non_periodic, hcd->nakking_channels, nakking);
-		dwc_otg_hcd_dump_state(hcd);
-		WARN_ON(1);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-
-#ifdef DEBUG
-/**
- * Macro to sample the remaining PHY clocks left in the current frame. This
- * may be used during debugging to determine the average time it takes to
- * execute sections of code. There are two possible sample points, "a" and
- * "b", so the _letter argument must be one of these values.
- *
- * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
- * example, "cat /sys/devices/lm0/hcd_frrem".
- */
-#define dwc_sample_frrem(_hcd, _qh, _letter) \
-{ \
-	hfnum_data_t hfnum; \
-	dwc_otg_qtd_t *qtd; \
-	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
-	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
-		hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
-		switch (hfnum.b.frnum & 0x7) { \
-		case 7: \
-			_hcd->hfnum_7_samples_##_letter++; \
-			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
-			break; \
-		case 0: \
-			_hcd->hfnum_0_samples_##_letter++; \
-			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
-			break; \
-		default: \
-			_hcd->hfnum_other_samples_##_letter++; \
-			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
-			break; \
-		} \
-	} \
-}
-#else
-#define dwc_sample_frrem(_hcd, _qh, _letter)
-#endif
-#endif
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_intr.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_intr.c
deleted file mode 100644
index 532ff7a..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_intr.c
+++ /dev/null
@@ -1,1923 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
- * $Revision: #70 $
- * $Date: 2008/10/16 $
- * $Change: 1117667 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-#include <linux/version.h>
-
-#include "otg_driver.h"
-#include "otg_hcd.h"
-#include "otg_regs.h"
-
-/** @file
- * This file contains the implementation of the HCD Interrupt handlers.
- */
-
-/** This function handles interrupts for the HCD. */
-int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	int retval = 0;
-
-	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-	gintsts_data_t gintsts;
-#ifdef DEBUG
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-#endif
-
-	/* Check if HOST Mode */
-	if (dwc_otg_is_host_mode(core_if)) {
-		gintsts.d32 = dwc_otg_read_core_intr(core_if);
-		if (!gintsts.d32) {
-			return 0;
-		}
-
-#ifdef DEBUG
-		/* Don't print debug message in the interrupt handler on SOF */
-# ifndef DEBUG_SOF
-		if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "\n");
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
-		if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-#endif
-		if (gintsts.b.usbreset) {
-			DWC_PRINT("Usb Reset In Host Mode\n");
-		}
-		if (gintsts.b.sofintr) {
-			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
-		}
-		if (gintsts.b.rxstsqlvl) {
-			retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
-		}
-		if (gintsts.b.nptxfempty) {
-			retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
-		}
-		if (gintsts.b.i2cintr) {
-			/** @todo Implement i2cintr handler. */
-		}
-		if (gintsts.b.portintr) {
-			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
-		}
-		if (gintsts.b.hcintr) {
-			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
-		}
-		if (gintsts.b.ptxfempty) {
-			retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
-		}
-#ifdef DEBUG
-# ifndef DEBUG_SOF
-		if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
-		{
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "DWC OTG HCD Finished Servicing Interrupts\n");
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "DWC OTG HCD gintsts=0x%08x\n",
-				    dwc_read_reg32(&global_regs->gintsts));
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "DWC OTG HCD gintmsk=0x%08x\n",
-				    dwc_read_reg32(&global_regs->gintmsk));
-		}
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
-	if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
-		DWC_DEBUGPL(DBG_HCD_FLOOD, "\n");
-#endif
-
-	}
-	S3C2410X_CLEAR_EINTPEND();
-
-	return retval;
-}
-
-#ifdef DWC_TRACK_MISSED_SOFS
-#warning Compiling code to track missed SOFs
-#define FRAME_NUM_ARRAY_SIZE 1000
-/**
- * This function is for debug only.
- */
-static inline void track_missed_sofs(uint16_t curr_frame_number)
-{
-	static uint16_t		frame_num_array[FRAME_NUM_ARRAY_SIZE];
-	static uint16_t		last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
-	static int		frame_num_idx = 0;
-	static uint16_t		last_frame_num = DWC_HFNUM_MAX_FRNUM;
-	static int		dumped_frame_num_array = 0;
-
-	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
-		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
-			frame_num_array[frame_num_idx] = curr_frame_number;
-			last_frame_num_array[frame_num_idx++] = last_frame_num;
-		}
-	} else if (!dumped_frame_num_array) {
-		int i;
-		printk(KERN_EMERG USB_DWC "Frame     Last Frame\n");
-		printk(KERN_EMERG USB_DWC "-----     ----------\n");
-		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
-			printk(KERN_EMERG USB_DWC "0x%04x    0x%04x\n",
-			       frame_num_array[i], last_frame_num_array[i]);
-		}
-		dumped_frame_num_array = 1;
-	}
-	last_frame_num = curr_frame_number;
-}
-#endif
-
-/**
- * Handles the start-of-frame interrupt in host mode. Non-periodic
- * transactions may be queued to the DWC_otg controller for the current
- * (micro)frame. Periodic transactions may be queued to the controller for the
- * next (micro)frame.
- */
-int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
-{
-	hfnum_data_t		hfnum;
-	struct list_head	*qh_entry;
-	dwc_otg_qh_t		*qh;
-	dwc_otg_transaction_type_e tr_type;
-	gintsts_data_t gintsts = {.d32 = 0};
-
-	hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
-	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-#endif
-	hcd->frame_number = hfnum.b.frnum;
-
-#ifdef DEBUG
-	hcd->frrem_accum += hfnum.b.frrem;
-	hcd->frrem_samples++;
-#endif
-
-#ifdef DWC_TRACK_MISSED_SOFS
-	track_missed_sofs(hcd->frame_number);
-#endif
-
-	/* Determine whether any periodic QHs should be executed. */
-	qh_entry = hcd->periodic_sched_inactive.next;
-	while (qh_entry != &hcd->periodic_sched_inactive) {
-		qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
-		qh_entry = qh_entry->next;
-		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
-			/*
-			 * Move QH to the ready list to be executed next
-			 * (micro)frame.
-			 */
-			list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
-		}
-	}
-
-	tr_type = dwc_otg_hcd_select_transactions(hcd);
-	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-		dwc_otg_hcd_queue_transactions(hcd, tr_type);
-	}
-
-	/* Clear interrupt */
-	gintsts.b.sofintr = 1;
-	dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
- * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
- * memory if the DWC_otg controller is operating in Slave mode. */
-int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	host_grxsts_data_t grxsts;
-	dwc_hc_t *hc = NULL;
-
-	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-
-	grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-
-	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-
-	/* Packet Status */
-	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
-	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
-	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
-	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
-
-	switch (grxsts.b.pktsts) {
-	case DWC_GRXSTS_PKTSTS_IN:
-		/* Read the data into the host buffer. */
-		if (grxsts.b.bcnt > 0) {
-			dwc_otg_read_packet(dwc_otg_hcd->core_if,
-					    hc->xfer_buff,
-					    grxsts.b.bcnt);
-
-			/* Update the HC fields for the next packet received. */
-			hc->xfer_count += grxsts.b.bcnt;
-			hc->xfer_buff += grxsts.b.bcnt;
-		}
-
-	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
-	case DWC_GRXSTS_PKTSTS_CH_HALTED:
-		/* Handled in interrupt, just ignore data */
-		break;
-	default:
-		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
-		break;
-	}
-
-	return 1;
-}
-
-/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
- * data packets may be written to the FIFO for OUT transfers. More requests
- * may be written to the non-periodic request queue for IN transfers. This
- * interrupt is enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
-	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-				       DWC_OTG_TRANSACTION_NON_PERIODIC);
-	return 1;
-}
-
-/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
- * packets may be written to the FIFO for OUT transfers. More requests may be
- * written to the periodic request queue for IN transfers. This interrupt is
- * enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
-	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-				       DWC_OTG_TRANSACTION_PERIODIC);
-	return 1;
-}
-
-/** There are multiple conditions that can cause a port interrupt. This function
- * determines which interrupt conditions have occurred and handles them
- * appropriately. */
-int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	int retval = 0;
-	hprt0_data_t hprt0;
-	hprt0_data_t hprt0_modify;
-
-	hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-	hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-
-	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-	 * GINTSTS */
-
-	hprt0_modify.b.prtena = 0;
-	hprt0_modify.b.prtconndet = 0;
-	hprt0_modify.b.prtenchng = 0;
-	hprt0_modify.b.prtovrcurrchng = 0;
-
-	/* Port Connect Detected
-	 * Set flag and clear if detected */
-	if (hprt0.b.prtconndet) {
-		DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-			    "Port Connect Detected--\n", hprt0.d32);
-		dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-		dwc_otg_hcd->flags.b.port_connect_status = 1;
-		hprt0_modify.b.prtconndet = 1;
-
-		/* B-Device has connected, Delete the connection timer. */
-		del_timer( &dwc_otg_hcd->conn_timer );
-
-		/* The Hub driver asserts a reset when it sees port connect
-		 * status change flag */
-		retval |= 1;
-	}
-
-	/* Port Enable Changed
-	 * Clear if detected - Set internal flag if disabled */
-	if (hprt0.b.prtenchng) {
-		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
-			    "Port Enable Changed--\n", hprt0.d32);
-		hprt0_modify.b.prtenchng = 1;
-		if (hprt0.b.prtena == 1) {
-			int do_reset = 0;
-			dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
-			dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
-			dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
-
-			/* Check if we need to adjust the PHY clock speed for
-			 * low power and adjust it */
-			if (params->host_support_fs_ls_low_power) {
-				gusbcfg_data_t usbcfg;
-
-				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
-				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
-				    hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
-					/*
-					 * Low power
-					 */
-					hcfg_data_t hcfg;
-					if (usbcfg.b.phylpwrclksel == 0) {
-						/* Set PHY low power clock select for FS/LS devices */
-						usbcfg.b.phylpwrclksel = 1;
-						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-						do_reset = 1;
-					}
-
-					hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-
-					if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
-					    params->host_ls_low_power_phy_clk ==
-					     DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
-						/* 6 MHZ */
-						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
-						if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
-							hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
-							dwc_write_reg32(&host_if->host_global_regs->hcfg,
-									hcfg.d32);
-							do_reset = 1;
-						}
-					} else {
-						/* 48 MHZ */
-						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
-						if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
-							hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
-							dwc_write_reg32(&host_if->host_global_regs->hcfg,
-									hcfg.d32);
-							do_reset = 1;
-						}
-					}
-				} else {
-					/*
-					 * Not low power
-					 */
-					if (usbcfg.b.phylpwrclksel == 1) {
-						usbcfg.b.phylpwrclksel = 0;
-						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-						do_reset = 1;
-					}
-				}
-
-				if (do_reset) {
-					tasklet_schedule(dwc_otg_hcd->reset_tasklet);
-				}
-			}
-
-			if (!do_reset) {
-				/* Port has been enabled set the reset change flag */
-				dwc_otg_hcd->flags.b.port_reset_change = 1;
-			}
-		} else {
-			dwc_otg_hcd->flags.b.port_enable_change = 1;
-		}
-		retval |= 1;
-	}
-
-	/** Overcurrent Change Interrupt */
-	if (hprt0.b.prtovrcurrchng) {
-		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
-			    "Port Overcurrent Changed--\n", hprt0.d32);
-		dwc_otg_hcd->flags.b.port_over_current_change = 1;
-		hprt0_modify.b.prtovrcurrchng = 1;
-		retval |= 1;
-	}
-
-	/* Clear Port Interrupts */
-	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-
-	return retval;
-}
-
-/** This interrupt indicates that one or more host channels has a pending
- * interrupt. There are multiple conditions that can cause each host channel
- * interrupt. This function determines which conditions have occurred for each
- * host channel interrupt and handles them appropriately. */
-int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	int i;
-	int retval = 0;
-	haint_data_t haint;
-
-	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
-	 * GINTSTS */
-
-	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
-
-	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
-		if (haint.b2.chint & (1 << i)) {
-			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
-		}
-	}
-
-	return retval;
-}
-
-/* Macro used to clear one channel interrupt */
-#define clear_hc_int(_hc_regs_, _intr_) \
-do { \
-	hcint_data_t hcint_clear = {.d32 = 0}; \
-	hcint_clear.b._intr_ = 1; \
-	dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
-} while (0)
-
-/*
- * Macro used to disable one channel interrupt. Channel interrupts are
- * disabled when the channel is halted or released by the interrupt handler.
- * There is no need to handle further interrupts of that type until the
- * channel is re-assigned. In fact, subsequent handling may cause crashes
- * because the channel structures are cleaned up when the channel is released.
- */
-#define disable_hc_int(_hc_regs_, _intr_) \
-do { \
-	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
-	hcintmsk.b._intr_ = 1; \
-	dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
-} while (0)
-
-/**
- * Gets the actual length of a transfer after the transfer halts. _halt_status
- * holds the reason for the halt.
- *
- * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
- * *short_read is set to 1 upon return if less than the requested
- * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
- * return. short_read may also be NULL on entry, in which case it remains
- * unchanged.
- */
-static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
-				       dwc_otg_hc_regs_t *hc_regs,
-				       dwc_otg_qtd_t *qtd,
-				       dwc_otg_halt_status_e halt_status,
-				       int *short_read)
-{
-	hctsiz_data_t	hctsiz;
-	uint32_t	length;
-
-	if (short_read != NULL) {
-		*short_read = 0;
-	}
-	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-
-	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-		if (hc->ep_is_in) {
-			length = hc->xfer_len - hctsiz.b.xfersize;
-			if (short_read != NULL) {
-				*short_read = (hctsiz.b.xfersize != 0);
-			}
-		} else if (hc->qh->do_split) {
-			length = qtd->ssplit_out_xfer_count;
-		} else {
-			length = hc->xfer_len;
-		}
-	} else {
-		/*
-		 * Must use the hctsiz.pktcnt field to determine how much data
-		 * has been transferred. This field reflects the number of
-		 * packets that have been transferred via the USB. This is
-		 * always an integral number of packets if the transfer was
-		 * halted before its normal completion. (Can't use the
-		 * hctsiz.xfersize field because that reflects the number of
-		 * bytes transferred via the AHB, not the USB).
-		 */
-		length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
-	}
-
-	return length;
-}
-
-/**
- * Updates the state of the URB after a Transfer Complete interrupt on the
- * host channel. Updates the actual_length field of the URB based on the
- * number of bytes transferred via the host channel. Sets the URB status
- * if the data transfer is finished.
- *
- * @return 1 if the data transfer specified by the URB is completely finished,
- * 0 otherwise.
- */
-static int update_urb_state_xfer_comp(dwc_hc_t *hc,
-				      dwc_otg_hc_regs_t *hc_regs,
-				      struct urb *urb,
-				      dwc_otg_qtd_t *qtd)
-{
-	int		xfer_done = 0;
-	int		short_read = 0;
-
-	urb->actual_length += get_actual_xfer_length(hc, hc_regs, qtd,
-						     DWC_OTG_HC_XFER_COMPLETE,
-						     &short_read);
-
-	if (short_read || urb->actual_length >= urb->transfer_buffer_length) {
-		xfer_done = 1;
-		if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
-			urb->status = -EREMOTEIO;
-		} else {
-			urb->status = 0;
-		}
-	}
-
-#ifdef DEBUG
-	{
-		hctsiz_data_t	hctsiz;
-		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
-		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
-		DWC_DEBUGPL(DBG_HCDV, "  urb %p\n", urb);
-		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
-			    urb->transfer_buffer_length);
-		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
-		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
-			    short_read, xfer_done);
-	}
-#endif
-
-	return xfer_done;
-}
-
-/*
- * Save the starting data toggle for the next transfer. The data toggle is
- * saved in the QH for non-control transfers and it's saved in the QTD for
- * control transfers.
- */
-static void save_data_toggle(dwc_hc_t *hc,
-			     dwc_otg_hc_regs_t *hc_regs,
-			     dwc_otg_qtd_t *qtd)
-{
-	hctsiz_data_t hctsiz;
-	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-
-	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
-		dwc_otg_qh_t *qh = hc->qh;
-		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-		} else {
-			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
-		}
-	} else {
-		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
-		} else {
-			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-		}
-	}
-}
-
-/**
- * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
- * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
- * still linked to the QH, the QH is added to the end of the inactive
- * non-periodic schedule. For periodic QHs, removes the QH from the periodic
- * schedule if no more QTDs are linked to the QH.
- */
-static void deactivate_qh(dwc_otg_hcd_t *hcd,
-			  dwc_otg_qh_t *qh,
-			  int free_qtd)
-{
-	int continue_split = 0;
-	dwc_otg_qtd_t *qtd;
-	unsigned long flags;
-
-	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
-
-	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-
-	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
-	if (qtd->complete_split) {
-		continue_split = 1;
-	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
-		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
-		continue_split = 1;
-	}
-
-	if (free_qtd) {
-		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-		continue_split = 0;
-	}
-
-	qh->channel = NULL;
-	qh->qtd_in_process = NULL;
-
-	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
-	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-}
-
-/**
- * Updates the state of an Isochronous URB when the transfer is stopped for
- * any reason. The fields of the current entry in the frame descriptor array
- * are set based on the transfer state and the input _halt_status. Completes
- * the Isochronous URB if all the URB frames have been completed.
- *
- * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
- * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
- */
-static dwc_otg_halt_status_e
-update_isoc_urb_state(dwc_otg_hcd_t *hcd,
-		      dwc_hc_t *hc,
-		      dwc_otg_hc_regs_t *hc_regs,
-		      dwc_otg_qtd_t *qtd,
-		      dwc_otg_halt_status_e halt_status)
-{
-	struct urb *urb = qtd->urb;
-	dwc_otg_halt_status_e ret_val = halt_status;
-	struct usb_iso_packet_descriptor *frame_desc;
-
-	frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-	switch (halt_status) {
-	case DWC_OTG_HC_XFER_COMPLETE:
-		frame_desc->status = 0;
-		frame_desc->actual_length =
-			get_actual_xfer_length(hc, hc_regs, qtd,
-					       halt_status, NULL);
-		break;
-	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
-		urb->error_count++;
-		if (hc->ep_is_in) {
-			frame_desc->status = -ENOSR;
-		} else {
-			frame_desc->status = -ECOMM;
-		}
-		frame_desc->actual_length = 0;
-		break;
-	case DWC_OTG_HC_XFER_BABBLE_ERR:
-		urb->error_count++;
-		frame_desc->status = -EOVERFLOW;
-		/* Don't need to update actual_length in this case. */
-		break;
-	case DWC_OTG_HC_XFER_XACT_ERR:
-		urb->error_count++;
-		frame_desc->status = -EPROTO;
-		frame_desc->actual_length =
-			get_actual_xfer_length(hc, hc_regs, qtd,
-					       halt_status, NULL);
-	default:
-		DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
-			  halt_status);
-		BUG();
-		break;
-	}
-
-	if (++qtd->isoc_frame_index == urb->number_of_packets) {
-		/*
-		 * urb->status is not used for isoc transfers.
-		 * The individual frame_desc statuses are used instead.
-		 */
-		dwc_otg_hcd_complete_urb(hcd, urb, 0);
-		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
-	} else {
-		ret_val = DWC_OTG_HC_XFER_COMPLETE;
-	}
-
-	return ret_val;
-}
-
-/**
- * Releases a host channel for use by other transfers. Attempts to select and
- * queue more transactions since at least one host channel is available.
- *
- * @param hcd The HCD state structure.
- * @param hc The host channel to release.
- * @param qtd The QTD associated with the host channel. This QTD may be freed
- * if the transfer is complete or an error has occurred.
- * @param halt_status Reason the channel is being released. This status
- * determines the actions taken by this function.
- */
-static void release_channel(dwc_otg_hcd_t *hcd,
-			    dwc_hc_t *hc,
-			    dwc_otg_qtd_t *qtd,
-			    dwc_otg_halt_status_e halt_status)
-{
-	dwc_otg_transaction_type_e tr_type;
-	int free_qtd;
-
-	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n",
-		    __func__, hc->hc_num, halt_status);
-
-	switch (halt_status) {
-	case DWC_OTG_HC_XFER_URB_COMPLETE:
-		free_qtd = 1;
-		break;
-	case DWC_OTG_HC_XFER_AHB_ERR:
-	case DWC_OTG_HC_XFER_STALL:
-	case DWC_OTG_HC_XFER_BABBLE_ERR:
-		free_qtd = 1;
-		break;
-	case DWC_OTG_HC_XFER_XACT_ERR:
-		if (qtd->error_count >= 3) {
-			DWC_DEBUGPL(DBG_HCDV, "  Complete URB with transaction error\n");
-			free_qtd = 1;
-			qtd->urb->status = -EPROTO;
-			dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
-		} else {
-			free_qtd = 0;
-		}
-		break;
-	case DWC_OTG_HC_XFER_URB_DEQUEUE:
-		/*
-		 * The QTD has already been removed and the QH has been
-		 * deactivated. Don't want to do anything except release the
-		 * host channel and try to queue more transfers.
-		 */
-		goto cleanup;
-	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
-		DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
-		free_qtd = 0;
-		break;
-	default:
-		free_qtd = 0;
-		break;
-	}
-
-	deactivate_qh(hcd, hc->qh, free_qtd);
-
- cleanup:
-	/*
-	 * Release the host channel for use by other transfers. The cleanup
-	 * function clears the channel interrupt enables and conditions, so
-	 * there's no need to clear the Channel Halted interrupt separately.
-	 */
-	dwc_otg_hc_cleanup(hcd->core_if, hc);
-	list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
-
-	if (!hc->halt_on_queue && !hc->halt_pending && hc->qh->nak_frame != 0xffff)
-		hcd->nakking_channels--;
-
-	switch (hc->ep_type) {
-	case DWC_OTG_EP_TYPE_CONTROL:
-	case DWC_OTG_EP_TYPE_BULK:
-		hcd->non_periodic_channels--;
-
-		/* This condition has once been observed, but the cause
-		 * was never determined. Check for it here, to collect
-		 * debug data if it occurs again. */
-		WARN_ON_ONCE(hcd->non_periodic_channels < 0);
-		break;
-
-	default:
-		/*
-		 * Don't release reservations for periodic channels here.
-		 * That's done when a periodic transfer is descheduled (i.e.
-		 * when the QH is removed from the periodic schedule).
-		 */
-		break;
-	}
-
-	if (halt_status != DWC_OTG_HC_XFER_NAK)
-		hc->qh->nak_frame = 0xffff;
-
-	/* Try to queue more transfers now that there's a free channel. */
-	tr_type = dwc_otg_hcd_select_transactions(hcd);
-	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-		dwc_otg_hcd_queue_transactions(hcd, tr_type);
-	}
-}
-
-/**
- * Halts a host channel. If the channel cannot be halted immediately because
- * the request queue is full, this function ensures that the FIFO empty
- * interrupt for the appropriate queue is enabled so that the halt request can
- * be queued when there is space in the request queue.
- *
- * This function may also be called in DMA mode. In that case, the channel is
- * simply released since the core always halts the channel automatically in
- * DMA mode.
- */
-static void halt_channel(dwc_otg_hcd_t *hcd,
-			 dwc_hc_t *hc,
-			 dwc_otg_qtd_t *qtd,
-			 dwc_otg_halt_status_e halt_status)
-{
-	if (hcd->core_if->dma_enable) {
-		release_channel(hcd, hc, qtd, halt_status);
-		return;
-	}
-
-	/* Slave mode processing... */
-	dwc_otg_hc_halt(hcd, hc, halt_status);
-
-	if (hc->halt_on_queue) {
-		gintmsk_data_t gintmsk = {.d32 = 0};
-		dwc_otg_core_global_regs_t *global_regs;
-		global_regs = hcd->core_if->core_global_regs;
-
-		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-			/*
-			 * Make sure the Non-periodic Tx FIFO empty interrupt
-			 * is enabled so that the non-periodic schedule will
-			 * be processed.
-			 */
-			gintmsk.b.nptxfempty = 1;
-			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-		} else {
-			/*
-			 * Move the QH from the periodic queued schedule to
-			 * the periodic assigned schedule. This allows the
-			 * halt to be queued when the periodic schedule is
-			 * processed.
-			 */
-			list_move(&hc->qh->qh_list_entry,
-				  &hcd->periodic_sched_assigned);
-
-			/*
-			 * Make sure the Periodic Tx FIFO Empty interrupt is
-			 * enabled so that the periodic schedule will be
-			 * processed.
-			 */
-			gintmsk.b.ptxfempty = 1;
-			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-		}
-	}
-}
-
-/**
- * Performs common cleanup for non-periodic transfers after a Transfer
- * Complete interrupt. This function should be called after any endpoint type
- * specific handling is finished to release the host channel.
- */
-static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
-				       dwc_hc_t *hc,
-				       dwc_otg_hc_regs_t *hc_regs,
-				       dwc_otg_qtd_t *qtd,
-				       dwc_otg_halt_status_e halt_status)
-{
-	hcint_data_t hcint;
-
-	qtd->error_count = 0;
-
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	if (hcint.b.nyet) {
-		/*
-		 * Got a NYET on the last transaction of the transfer. This
-		 * means that the endpoint should be in the PING state at the
-		 * beginning of the next transfer.
-		 */
-		hc->qh->ping_state = 1;
-		clear_hc_int(hc_regs, nyet);
-	}
-
-	/*
-	 * Always halt and release the host channel to make it available for
-	 * more transfers. There may still be more phases for a control
-	 * transfer or more data packets for a bulk transfer at this point,
-	 * but the host channel is still halted. A channel will be reassigned
-	 * to the transfer when the non-periodic schedule is processed after
-	 * the channel is released. This allows transactions to be queued
-	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
-	 * Tx FIFO Empty interrupt if necessary.
-	 */
-	if (hc->ep_is_in) {
-		/*
-		 * IN transfers in Slave mode require an explicit disable to
-		 * halt the channel. (In DMA mode, this call simply releases
-		 * the channel.)
-		 */
-		halt_channel(hcd, hc, qtd, halt_status);
-	} else {
-		/*
-		 * The channel is automatically disabled by the core for OUT
-		 * transfers in Slave mode.
-		 */
-		release_channel(hcd, hc, qtd, halt_status);
-	}
-}
-
-/**
- * Performs common cleanup for periodic transfers after a Transfer Complete
- * interrupt. This function should be called after any endpoint type specific
- * handling is finished to release the host channel.
- */
-static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
-				   dwc_hc_t *hc,
-				   dwc_otg_hc_regs_t *hc_regs,
-				   dwc_otg_qtd_t *qtd,
-				   dwc_otg_halt_status_e halt_status)
-{
-	hctsiz_data_t hctsiz;
-	qtd->error_count = 0;
-
-	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
-		/* Core halts channel in these cases. */
-		release_channel(hcd, hc, qtd, halt_status);
-	} else {
-		/* Flush any outstanding requests from the Tx queue. */
-		halt_channel(hcd, hc, qtd, halt_status);
-	}
-}
-
-/**
- * Handles a host channel Transfer Complete interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
-				       dwc_hc_t *hc,
-				       dwc_otg_hc_regs_t *hc_regs,
-				       dwc_otg_qtd_t *qtd)
-{
-	int			urb_xfer_done;
-	dwc_otg_halt_status_e	halt_status = DWC_OTG_HC_XFER_COMPLETE;
-	struct urb		*urb = qtd->urb;
-	int			pipe_type = usb_pipetype(urb->pipe);
-
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "Transfer Complete--\n", hc->hc_num);
-
-	/*
-	 * Handle xfer complete on CSPLIT.
-	 */
-	if (hc->qh->do_split) {
-		qtd->complete_split = 0;
-	}
-
-	/* Update the QTD and URB states. */
-	switch (pipe_type) {
-	case PIPE_CONTROL:
-		switch (qtd->control_phase) {
-		case DWC_OTG_CONTROL_SETUP:
-			if (urb->transfer_buffer_length > 0) {
-				qtd->control_phase = DWC_OTG_CONTROL_DATA;
-			} else {
-				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-			}
-			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
-			halt_status = DWC_OTG_HC_XFER_COMPLETE;
-			break;
-		case DWC_OTG_CONTROL_DATA: {
-			urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-			if (urb_xfer_done) {
-				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-				DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
-			} else {
-				save_data_toggle(hc, hc_regs, qtd);
-			}
-			halt_status = DWC_OTG_HC_XFER_COMPLETE;
-			break;
-		}
-		case DWC_OTG_CONTROL_STATUS:
-			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
-			if (urb->status == -EINPROGRESS) {
-				urb->status = 0;
-			}
-			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-			break;
-		}
-
-		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-		break;
-	case PIPE_BULK:
-		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
-		urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-		if (urb_xfer_done) {
-			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-		} else {
-			halt_status = DWC_OTG_HC_XFER_COMPLETE;
-		}
-
-		save_data_toggle(hc, hc_regs, qtd);
-		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-		break;
-	case PIPE_INTERRUPT:
-		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
-		update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-
-		/*
-		 * Interrupt URB is done on the first transfer complete
-		 * interrupt.
-		 */
-		dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-		save_data_toggle(hc, hc_regs, qtd);
-		complete_periodic_xfer(hcd, hc, hc_regs, qtd,
-				       DWC_OTG_HC_XFER_URB_COMPLETE);
-		break;
-	case PIPE_ISOCHRONOUS:
-		DWC_DEBUGPL(DBG_HCDV,  "  Isochronous transfer complete\n");
-		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-							    DWC_OTG_HC_XFER_COMPLETE);
-		}
-		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-		break;
-	}
-
-	disable_hc_int(hc_regs, xfercompl);
-
-	return 1;
-}
-
-/**
- * Handles a host channel STALL interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
-				    dwc_hc_t *hc,
-				    dwc_otg_hc_regs_t *hc_regs,
-				    dwc_otg_qtd_t *qtd)
-{
-	struct urb *urb = qtd->urb;
-	int pipe_type = usb_pipetype(urb->pipe);
-
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "STALL Received--\n", hc->hc_num);
-
-	if (pipe_type == PIPE_CONTROL) {
-		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-	}
-
-	if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
-		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-		/*
-		 * USB protocol requires resetting the data toggle for bulk
-		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
-		 * setup command is issued to the endpoint. Anticipate the
-		 * CLEAR_FEATURE command since a STALL has occurred and reset
-		 * the data toggle now.
-		 */
-		hc->qh->data_toggle = 0;
-	}
-
-	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
-
-	disable_hc_int(hc_regs, stall);
-
-	return 1;
-}
-
-/*
- * Updates the state of the URB when a transfer has been stopped due to an
- * abnormal condition before the transfer completes. Modifies the
- * actual_length field of the URB to reflect the number of bytes that have
- * actually been transferred via the host channel.
- */
-static void update_urb_state_xfer_intr(dwc_hc_t *hc,
-				       dwc_otg_hc_regs_t *hc_regs,
-				       struct urb *urb,
-				       dwc_otg_qtd_t *qtd,
-				       dwc_otg_halt_status_e halt_status)
-{
-	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
-							    halt_status, NULL);
-	urb->actual_length += bytes_transferred;
-
-#ifdef DEBUG
-	{
-		hctsiz_data_t	hctsiz;
-		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n", hc->start_pkt_count);
-		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
-		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
-		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n", bytes_transferred);
-		DWC_DEBUGPL(DBG_HCDV, "  urb %p\n", urb);
-		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
-		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
-			    urb->transfer_buffer_length);
-	}
-#endif
-}
-
-/**
- * Handles a host channel NAK interrupt. This handler may be called in either
- * DMA mode or Slave mode.
- */
-static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
-				  dwc_hc_t *hc,
-				  dwc_otg_hc_regs_t *hc_regs,
-				  dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "NAK Received--\n", hc->hc_num);
-	/*
-	* When we get bulk NAKs then remember this so we holdoff on this qh until
-	* the beginning of the next frame
-	*/
-	switch (usb_pipetype(qtd->urb->pipe)) {
-		case PIPE_BULK:
-			/* xfer_started can be 0 when a halted interrupt
-			 * occurs with the nak flag set, then first the
-			 * halted handler runs and then this nak
-			 * handler. In this case, also don't update
-			 * nak_frame, since the qh might already be
-			 * assigned to another host channel. */
-			if (!hc->halt_on_queue && !hc->halt_pending && hc->xfer_started && hc->qh->nak_frame == 0xffff)
-				hcd->nakking_channels++;
-			if (hc->xfer_started)
-				hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-	}
-
-	/*
-	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
-	 * interrupt.  Re-start the SSPLIT transfer.
-	 */
-	if (hc->do_split) {
-		if (hc->complete_split) {
-			qtd->error_count = 0;
-		}
-		qtd->complete_split = 0;
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-		goto handle_nak_done;
-	}
-
-	switch (usb_pipetype(qtd->urb->pipe)) {
-	case PIPE_CONTROL:
-	case PIPE_BULK:
-		if (hcd->core_if->dma_enable && hc->ep_is_in) {
-			/*
-			 * NAK interrupts are enabled on bulk/control IN
-			 * transfers in DMA mode for the sole purpose of
-			 * resetting the error count after a transaction error
-			 * occurs. The core will continue transferring data.
-			 */
-			qtd->error_count = 0;
-			goto handle_nak_done;
-		}
-
-		/*
-		 * NAK interrupts normally occur during OUT transfers in DMA
-		 * or Slave mode. For IN transfers, more requests will be
-		 * queued as request queue space is available.
-		 */
-		qtd->error_count = 0;
-
-		if (!hc->qh->ping_state) {
-			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-						   qtd, DWC_OTG_HC_XFER_NAK);
-			save_data_toggle(hc, hc_regs, qtd);
-			if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
-				hc->qh->ping_state = 1;
-			}
-		}
-
-		/*
-		 * Halt the channel so the transfer can be re-started from
-		 * the appropriate point or the PING protocol will
-		 * start/continue.
-		 */
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-		break;
-	case PIPE_INTERRUPT:
-		qtd->error_count = 0;
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-		break;
-	case PIPE_ISOCHRONOUS:
-		/* Should never get called for isochronous transfers. */
-		BUG();
-		break;
-	}
-
- handle_nak_done:
-	disable_hc_int(hc_regs, nak);
-
-	return 1;
-}
-
-/**
- * Handles a host channel ACK interrupt. This interrupt is enabled when
- * performing the PING protocol in Slave mode, when errors occur during
- * either Slave mode or DMA mode, and during Start Split transactions.
- */
-static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
-				  dwc_hc_t *hc,
-				  dwc_otg_hc_regs_t *hc_regs,
-				  dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "ACK Received--\n", hc->hc_num);
-
-	if (hc->do_split) {
-		/*
-		 * Handle ACK on SSPLIT.
-		 * ACK should not occur in CSPLIT.
-		 */
-		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
-			qtd->ssplit_out_xfer_count = hc->xfer_len;
-		}
-		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
-			/* Don't need complete for isochronous out transfers. */
-			qtd->complete_split = 1;
-		}
-
-		/* ISOC OUT */
-		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-			switch (hc->xact_pos) {
-			case DWC_HCSPLIT_XACTPOS_ALL:
-				break;
-			case DWC_HCSPLIT_XACTPOS_END:
-				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-				qtd->isoc_split_offset = 0;
-				break;
-			case DWC_HCSPLIT_XACTPOS_BEGIN:
-			case DWC_HCSPLIT_XACTPOS_MID:
-				/*
-				 * For BEGIN or MID, calculate the length for
-				 * the next microframe to determine the correct
-				 * SSPLIT token, either MID or END.
-				 */
-				{
-					struct usb_iso_packet_descriptor *frame_desc;
-
-					frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
-					qtd->isoc_split_offset += 188;
-
-					if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
-						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
-					} else {
-						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
-					}
-
-				}
-				break;
-			}
-		} else {
-			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-		}
-	} else {
-		qtd->error_count = 0;
-
-		if (hc->qh->ping_state) {
-			hc->qh->ping_state = 0;
-			/*
-			 * Halt the channel so the transfer can be re-started
-			 * from the appropriate point. This only happens in
-			 * Slave mode. In DMA mode, the ping_state is cleared
-			 * when the transfer is started because the core
-			 * automatically executes the PING, then the transfer.
-			 */
-			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-		}
-	}
-
-	/*
-	 * If the ACK occurred when _not_ in the PING state, let the channel
-	 * continue transferring data after clearing the error count.
-	 */
-
-	disable_hc_int(hc_regs, ack);
-
-	return 1;
-}
-
-/**
- * Handles a host channel NYET interrupt. This interrupt should only occur on
- * Bulk and Control OUT endpoints and for complete split transactions. If a
- * NYET occurs at the same time as a Transfer Complete interrupt, it is
- * handled in the xfercomp interrupt handler, not here. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
-				   dwc_hc_t *hc,
-				   dwc_otg_hc_regs_t *hc_regs,
-				   dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "NYET Received--\n", hc->hc_num);
-
-	/*
-	 * NYET on CSPLIT
-	 * re-do the CSPLIT immediately on non-periodic
-	 */
-	if (hc->do_split && hc->complete_split) {
-		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-			int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-
-			if (dwc_full_frame_num(frnum) !=
-			    dwc_full_frame_num(hc->qh->sched_frame)) {
-				/*
-				 * No longer in the same full speed frame.
-				 * Treat this as a transaction error.
-				 */
-#if 0
-				/** @todo Fix system performance so this can
-				 * be treated as an error. Right now complete
-				 * splits cannot be scheduled precisely enough
-				 * due to other system activity, so this error
-				 * occurs regularly in Slave mode.
-				 */
-				qtd->error_count++;
-#endif
-				qtd->complete_split = 0;
-				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-				/** @todo add support for isoc release */
-				goto handle_nyet_done;
-			}
-		}
-
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-		goto handle_nyet_done;
-	}
-
-	hc->qh->ping_state = 1;
-	qtd->error_count = 0;
-
-	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
-				   DWC_OTG_HC_XFER_NYET);
-	save_data_toggle(hc, hc_regs, qtd);
-
-	/*
-	 * Halt the channel and re-start the transfer so the PING
-	 * protocol will start.
-	 */
-	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-
-handle_nyet_done:
-	disable_hc_int(hc_regs, nyet);
-	return 1;
-}
-
-/**
- * Handles a host channel babble interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
-				     dwc_hc_t *hc,
-				     dwc_otg_hc_regs_t *hc_regs,
-				     dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "Babble Error--\n", hc->hc_num);
-	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-		dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
-	} else {
-		dwc_otg_halt_status_e halt_status;
-		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-						    DWC_OTG_HC_XFER_BABBLE_ERR);
-		halt_channel(hcd, hc, qtd, halt_status);
-	}
-	disable_hc_int(hc_regs, bblerr);
-	return 1;
-}
-
-/**
- * Handles a host channel AHB error interrupt. This handler is only called in
- * DMA mode.
- */
-static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
-				     dwc_hc_t *hc,
-				     dwc_otg_hc_regs_t *hc_regs,
-				     dwc_otg_qtd_t *qtd)
-{
-	hcchar_data_t	hcchar;
-	hcsplt_data_t	hcsplt;
-	hctsiz_data_t	hctsiz;
-	uint32_t	hcdma;
-	struct urb	*urb = qtd->urb;
-
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "AHB Error--\n", hc->hc_num);
-
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-	hcdma = dwc_read_reg32(&hc_regs->hcdma);
-
-	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
-	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-		  DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
-	DWC_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
-	DWC_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-	DWC_ERROR("  Endpoint type: %s\n",
-		  ({char *pipetype;
-		    switch (usb_pipetype(urb->pipe)) {
-		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
-		    case PIPE_BULK: pipetype = "BULK"; break;
-		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-		    default: pipetype = "UNKNOWN"; break;
-		   }; pipetype;}));
-	DWC_ERROR("  Speed: %s\n",
-		  ({char *speed;
-		    switch (urb->dev->speed) {
-		    case USB_SPEED_HIGH: speed = "HIGH"; break;
-		    case USB_SPEED_FULL: speed = "FULL"; break;
-		    case USB_SPEED_LOW: speed = "LOW"; break;
-		    default: speed = "UNKNOWN"; break;
-		   }; speed;}));
-	DWC_ERROR("  Max packet size: %d\n",
-		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-	DWC_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
-	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
-		  urb->transfer_buffer, (void *)urb->transfer_dma);
-	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
-		  urb->setup_packet, (void *)urb->setup_dma);
-	DWC_ERROR("  Interval: %d\n", urb->interval);
-
-	dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
-
-	/*
-	 * Force a channel halt. Don't call halt_channel because that won't
-	 * write to the HCCHARn register in DMA mode to force the halt.
-	 */
-	dwc_otg_hc_halt(hcd, hc, DWC_OTG_HC_XFER_AHB_ERR);
-
-	disable_hc_int(hc_regs, ahberr);
-	return 1;
-}
-
-/**
- * Handles a host channel transaction error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
-				      dwc_hc_t *hc,
-				      dwc_otg_hc_regs_t *hc_regs,
-				      dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "Transaction Error--\n", hc->hc_num);
-
-	switch (usb_pipetype(qtd->urb->pipe)) {
-	case PIPE_CONTROL:
-	case PIPE_BULK:
-		qtd->error_count++;
-		if (!hc->qh->ping_state) {
-			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-						   qtd, DWC_OTG_HC_XFER_XACT_ERR);
-			save_data_toggle(hc, hc_regs, qtd);
-			if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
-				hc->qh->ping_state = 1;
-			}
-		}
-
-		/*
-		 * Halt the channel so the transfer can be re-started from
-		 * the appropriate point or the PING protocol will start.
-		 */
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-		break;
-	case PIPE_INTERRUPT:
-		qtd->error_count++;
-		if (hc->do_split && hc->complete_split) {
-			qtd->complete_split = 0;
-		}
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-		break;
-	case PIPE_ISOCHRONOUS:
-		{
-			dwc_otg_halt_status_e halt_status;
-			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-							    DWC_OTG_HC_XFER_XACT_ERR);
-
-			halt_channel(hcd, hc, qtd, halt_status);
-		}
-		break;
-	}
-
-	disable_hc_int(hc_regs, xacterr);
-
-	return 1;
-}
-
-/**
- * Handles a host channel frame overrun interrupt. This handler may be called
- * in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
-				       dwc_hc_t *hc,
-				       dwc_otg_hc_regs_t *hc_regs,
-				       dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "Frame Overrun--\n", hc->hc_num);
-
-	switch (usb_pipetype(qtd->urb->pipe)) {
-	case PIPE_CONTROL:
-	case PIPE_BULK:
-		break;
-	case PIPE_INTERRUPT:
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
-		break;
-	case PIPE_ISOCHRONOUS:
-		{
-			dwc_otg_halt_status_e halt_status;
-			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-							    DWC_OTG_HC_XFER_FRAME_OVERRUN);
-
-			halt_channel(hcd, hc, qtd, halt_status);
-		}
-		break;
-	}
-
-	disable_hc_int(hc_regs, frmovrun);
-
-	return 1;
-}
-
-/**
- * Handles a host channel data toggle error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
-					 dwc_hc_t *hc,
-					 dwc_otg_hc_regs_t *hc_regs,
-					 dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		"Data Toggle Error on %s transfer--\n",
-		hc->hc_num, (hc->ep_is_in ? "IN" : "OUT"));
-
-	/* Data toggles on split transactions cause the hc to halt.
-	 * restart transfer */
-	if (hc->qh->do_split) {
-		qtd->error_count++;
-		save_data_toggle(hc, hc_regs, qtd);
-		update_urb_state_xfer_intr(hc, hc_regs,
-			qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-	} else if (hc->ep_is_in) {
-		/* An unmasked data toggle error on a non-split DMA transaction 
-is
-		 * for the sole purpose of resetting error counts. Disable other
-		 * interrupts unmasked for the same reason.
-		 */
-		if (hcd->core_if->dma_enable) {
-			disable_hc_int(hc_regs, ack);
-			disable_hc_int(hc_regs, nak);
-		}
-		qtd->error_count = 0;
-	}
-
-	disable_hc_int(hc_regs, datatglerr);
-
-	return 1;
-}
-
-#ifdef DEBUG
-/**
- * This function is for debug only. It checks that a valid halt status is set
- * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
- * taken and a warning is issued.
- * @return 1 if halt status is ok, 0 otherwise.
- */
-static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
-				 dwc_hc_t *hc,
-				 dwc_otg_hc_regs_t *hc_regs,
-				 dwc_otg_qtd_t *qtd)
-{
-	hcchar_data_t hcchar;
-	hctsiz_data_t hctsiz;
-	hcint_data_t hcint;
-	hcintmsk_data_t hcintmsk;
-	hcsplt_data_t hcsplt;
-
-	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
-		/*
-		 * This code is here only as a check. This condition should
-		 * never happen. Ignore the halt if it does occur.
-		 */
-		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-		hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-		DWC_WARN("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
-			 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
-			 "hcint 0x%08x, hcintmsk 0x%08x, "
-			 "hcsplt 0x%08x, qtd->complete_split %d\n",
-			 __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
-			 hcint.d32, hcintmsk.d32,
-			 hcsplt.d32, qtd->complete_split);
-
-		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
-			 __func__, hc->hc_num);
-		DWC_WARN("\n");
-		clear_hc_int(hc_regs, chhltd);
-		return 0;
-	}
-
-	/*
-	 * This code is here only as a check. hcchar.chdis should
-	 * never be set when the halt interrupt occurs. Halt the
-	 * channel again if it does occur.
-	 */
-	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-	if (hcchar.b.chdis) {
-		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
-			 "hcchar 0x%08x, trying to halt again\n",
-			 __func__, hcchar.d32);
-		clear_hc_int(hc_regs, chhltd);
-		if (hc->halt_pending && !hc->halt_on_queue && hc->qh->nak_frame != 0xffff)
-			hcd->nakking_channels++;
-		hc->halt_pending = 0;
-		halt_channel(hcd, hc, qtd, hc->halt_status);
-		return 0;
-	}
-
-	return 1;
-}
-#endif
-
-/**
- * Handles a host Channel Halted interrupt in DMA mode. This handler
- * determines the reason the channel halted and proceeds accordingly.
- */
-static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
-				      dwc_hc_t *hc,
-				      dwc_otg_hc_regs_t *hc_regs,
-				      dwc_otg_qtd_t *qtd)
-{
-	hcint_data_t hcint;
-	hcintmsk_data_t hcintmsk;
-	int out_nak_enh = 0;
-
-	/* For core with OUT NAK enhancement, the flow for high-
-	 * speed CONTROL/BULK OUT is handled a little differently.
-	 */
-	if (hcd->core_if->snpsid >= 0x4F54271A) {
-		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
-		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "OUT NAK enhancement enabled\n");
-			out_nak_enh = 1;
-		} else {
-			DWC_DEBUGPL(DBG_HCD_FLOOD, "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
-		}
-	} else {
-		DWC_DEBUGPL(DBG_HCD_FLOOD, "OUT NAK enhancement disabled, no core support\n");
-	}
-
-	if (hc->halt_status == DWC_OTG_HC_XFER_NAK) {
-		/* The channel was nakking and halted to free up the
-		 * channel for another transfer. If this channel has
-		 * already received data, we need to skip that amount on
-		 * the next try.
-		 */
-		update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-						   qtd, DWC_OTG_HC_XFER_NAK);
-
-		save_data_toggle(hc, hc_regs, qtd);
-
-		/* It turns out that sometimes a channel is halted just
-		 * as it receives its last packet. This causes the
-		 * to trigger a channel halted interrupt without a
-		 * transfer complete flag, even though the transfer is
-		 * actually complete. If we don't handle that here, the
-		 * qtd will be resubmitted and since bulk in can't have
-		 * empty packets, this will cause one full packet of
-		 * "extra" data to be transfered. So we check here to
-		 * see if the transfer is complete and handle that
-		 * accordingly.
-		 */
-		if (usb_pipebulk(qtd->urb->pipe) &&
-		    usb_pipein(qtd->urb->pipe) &&
-		    qtd->urb->actual_length == qtd->urb->transfer_buffer_length) {
-			dwc_otg_hcd_complete_urb(hcd, qtd->urb, 0);
-			complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-		} else {
-			release_channel(hcd, hc, qtd, hc->halt_status);
-		}
-		return;
-	}
-
-	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-	    hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-		/*
-		 * Just release the channel. A dequeue can happen on a
-		 * transfer timeout. In the case of an AHB Error, the channel
-		 * was forced to halt because there's no way to gracefully
-		 * recover.
-		 */
-		release_channel(hcd, hc, qtd, hc->halt_status);
-		return;
-	}
-
-	/* Read the HCINTn register to determine the cause for the halt. */
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-
-	if (hcint.b.xfercomp) {
-		/** @todo This is here because of a possible hardware bug.  Spec
-		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
-		 * interrupt w/ACK bit set should occur, but I only see the
-		 * XFERCOMP bit, even with it masked out.  This is a workaround
-		 * for that behavior.  Should fix this when hardware is fixed.
-		 */
-		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-		}
-		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
-	} else if (hcint.b.stall) {
-		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-	} else if (hcint.b.xacterr) {
-		if (out_nak_enh) {
-			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
-				printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
-				qtd->error_count = 0;
-			} else {
-				printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
-			}
-		}
-
-		/*
-		 * Must handle xacterr before nak or ack. Could get a xacterr
-		 * at the same time as either of these on a BULK/CONTROL OUT
-		 * that started with a PING. The xacterr takes precedence.
-		 */
-		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-	} else if (hcint.b.datatglerr) {
-		handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
-	} else if (!out_nak_enh) {
-		if (hcint.b.nyet) {
-			/*
-			 * Must handle nyet before nak or ack. Could get a nyet at the
-			 * same time as either of those on a BULK/CONTROL OUT that
-			 * started with a PING. The nyet takes precedence.
-			 */
-			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
-		} else if (hcint.b.bblerr) {
-			handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-		} else if (hcint.b.frmovrun) {
-			handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
-		} else if (hcint.b.nak && !hcintmsk.b.nak) {
-			/*
-			 * If nak is not masked, it's because a non-split IN transfer
-			 * is in an error state. In that case, the nak is handled by
-			 * the nak interrupt handler, not here. Handle nak here for
-			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
-			 * rewinding the buffer pointer.
-			 */
-			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-		} else if (hcint.b.ack && !hcintmsk.b.ack) {
-			/*
-			 * If ack is not masked, it's because a non-split IN transfer
-			 * is in an error state. In that case, the ack is handled by
-			 * the ack interrupt handler, not here. Handle ack here for
-			 * split transfers. Start splits halt on ACK.
-			 */
-			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-		} else {
-			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-				/*
-				 * A periodic transfer halted with no other channel
-				 * interrupts set. Assume it was halted by the core
-				 * because it could not be completed in its scheduled
-				 * (micro)frame.
-				 */
-#ifdef DEBUG
-				DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
-					  __func__, hc->hc_num);
-#endif
-				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
-			} else {
-				DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
-					  "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
-					  __func__, hc->hc_num, hcint.d32,
-					  dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
-			}
-		}
-	} else {
-		printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
-	}
-}
-
-/**
- * Handles a host channel Channel Halted interrupt.
- *
- * In slave mode, this handler is called only when the driver specifically
- * requests a halt. This occurs during handling other host channel interrupts
- * (e.g. nak, xacterr, stall, nyet, etc.).
- *
- * In DMA mode, this is the interrupt that occurs when the core has finished
- * processing a transfer on a channel. Other host channel interrupts (except
- * ahberr) are disabled in DMA mode.
- */
-static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
-				     dwc_hc_t *hc,
-				     dwc_otg_hc_regs_t *hc_regs,
-				     dwc_otg_qtd_t *qtd)
-{
-	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-		    "Channel Halted--\n", hc->hc_num);
-
-	if (hcd->core_if->dma_enable) {
-		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
-	} else {
-#ifdef DEBUG
-		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
-			return 1;
-		}
-#endif
-		release_channel(hcd, hc, qtd, hc->halt_status);
-	}
-
-	return 1;
-}
-
-/** Handles interrupt for a specific Host Channel */
-int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
-{
-	int retval = 0;
-	hcint_data_t hcint;
-	hcintmsk_data_t hcintmsk;
-	dwc_hc_t *hc;
-	dwc_otg_hc_regs_t *hc_regs;
-	dwc_otg_qtd_t *qtd;
-
-	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
-
-	hc = dwc_otg_hcd->hc_ptr_array[num];
-
-	check_nakking(dwc_otg_hcd, __FUNCTION__,  "start");
-
-
-	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
-	qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
-	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-	DWC_DEBUGPL(DBG_HCDV, "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
-
-	hcint.d32 = hcint.d32 & hcintmsk.d32;
-
-	if (!dwc_otg_hcd->core_if->dma_enable) {
-		if (hcint.b.chhltd && hcint.d32 != 0x2) {
-			hcint.b.chhltd = 0;
-		}
-	}
-
-	if (hcint.b.xfercomp) {
-		retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-		/*
-		 * If NYET occurred at same time as Xfer Complete, the NYET is
-		 * handled by the Xfer Complete interrupt handler. Don't want
-		 * to call the NYET interrupt handler in this case.
-		 */
-		hcint.b.nyet = 0;
-	}
-	if (hcint.b.chhltd) {
-		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.ahberr) {
-		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.stall) {
-		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.nak) {
-		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.ack && !hcint.b.chhltd) {
-		retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.nyet) {
-		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.xacterr) {
-		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.bblerr) {
-		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.frmovrun) {
-		retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (hcint.b.datatglerr) {
-		retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-	}
-	if (check_nakking(dwc_otg_hcd, __FUNCTION__,  "end")) {
-		DWC_WARN("--Host Channel Interrupt--, Channel %d\n", num);
-		DWC_WARN("  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
-	}
-
-	return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_queue.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_queue.c
deleted file mode 100644
index aaed49d..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_hcd_queue.c
+++ /dev/null
@@ -1,813 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
- * $Revision: #33 $
- * $Date: 2008/07/15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the functions to manage Queue Heads and Queue
- * Transfer Descriptors.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/version.h>
-
-#include "otg_driver.h"
-#include "otg_hcd.h"
-#include "otg_regs.h"
-
-/**
- * This function allocates and initializes a QH.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param[in] urb Holds the information about the device/endpoint that we need
- * to initialize the QH.
- *
- * @return Returns pointer to the newly allocated QH, or NULL on error. */
-dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
-{
-	dwc_otg_qh_t *qh;
-
-	/* Allocate memory */
-	/** @todo add memflags argument */
-	qh = dwc_otg_hcd_qh_alloc ();
-	if (qh == NULL) {
-		return NULL;
-	}
-
-	dwc_otg_hcd_qh_init (hcd, qh, urb);
-	return qh;
-}
-
-/** Free each QTD in the QH's QTD-list then free the QH.  QH should already be
- * removed from a list.  QTD list should already be empty if called from URB
- * Dequeue.
- *
- * @param[in] hcd HCD instance.
- * @param[in] qh The QH to free.
- */
-void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	dwc_otg_qtd_t *qtd;
-	struct list_head *pos;
-	//unsigned long flags;
-
-	/* Free each QTD in the QTD list */
-
-#ifdef CONFIG_SMP
-	//the spinlock is locked before this function get called,
-	//but in case the lock is needed, the check function is preserved
-
-	//but in non-SMP mode, all spinlock is lockable.
-	//don't do the test in non-SMP mode
-
-	if(spin_trylock(&hcd->lock)) {
-		printk("%s: It is not supposed to be lockable!!\n",__func__);
-		BUG();
-	}
-#endif
-//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-	for (pos = qh->qtd_list.next;
-	     pos != &qh->qtd_list;
-	     pos = qh->qtd_list.next)
-	{
-		list_del (pos);
-		qtd = dwc_list_to_qtd (pos);
-		dwc_otg_hcd_qtd_free (qtd);
-	}
-//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-
-	kfree (qh);
-	return;
-}
-
-/** Initializes a QH structure.
- *
- * @param[in] hcd The HCD state structure for the DWC OTG controller.
- * @param[in] qh The QH to init.
- * @param[in] urb Holds the information about the device/endpoint that we need
- * to initialize the QH. */
-#define SCHEDULE_SLOP 10
-void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
-{
-	char *speed, *type;
-	memset (qh, 0, sizeof (dwc_otg_qh_t));
-
-	/* Initialize QH */
-	switch (usb_pipetype(urb->pipe)) {
-	case PIPE_CONTROL:
-		qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
-		break;
-	case PIPE_BULK:
-		qh->ep_type = USB_ENDPOINT_XFER_BULK;
-		break;
-	case PIPE_ISOCHRONOUS:
-		qh->ep_type = USB_ENDPOINT_XFER_ISOC;
-		break;
-	case PIPE_INTERRUPT:
-		qh->ep_type = USB_ENDPOINT_XFER_INT;
-		break;
-	}
-
-	qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
-
-	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-	qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
-	INIT_LIST_HEAD(&qh->qtd_list);
-	INIT_LIST_HEAD(&qh->qh_list_entry);
-	qh->channel = NULL;
-	qh->speed = urb->dev->speed;
-
-	/* FS/LS Enpoint on HS Hub
-	 * NOT virtual root hub */
-	qh->do_split = 0;
-	if (((urb->dev->speed == USB_SPEED_LOW) ||
-	     (urb->dev->speed == USB_SPEED_FULL)) &&
-	    (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
-	{
-		DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-			   usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
-			   urb->dev->ttport);
-		qh->do_split = 1;
-	}
-
-	if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
-	    qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
-		/* Compute scheduling parameters once and save them. */
-		hprt0_data_t hprt;
-
-		/** @todo Account for split transfers in the bus time. */
-		int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
-		qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
-					       usb_pipein(urb->pipe),
-					       (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
-					       bytecount));
-
-		/* Start in a slightly future (micro)frame. */
-		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
-						     SCHEDULE_SLOP);
-		qh->interval = urb->interval;
-#if 0
-		/* Increase interrupt polling rate for debugging. */
-		if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-			qh->interval = 8;
-		}
-#endif
-		hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
-		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
-		    ((urb->dev->speed == USB_SPEED_LOW) ||
-		     (urb->dev->speed == USB_SPEED_FULL))) {
-			qh->interval *= 8;
-			qh->sched_frame |= 0x7;
-			qh->start_split_frame = qh->sched_frame;
-		}
-
-	}
-
-	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
-		    urb->dev->devnum);
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
-		    usb_pipeendpoint(urb->pipe),
-		    usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-
-	qh->nak_frame = 0xffff;
-
-	switch(urb->dev->speed) {
-	case USB_SPEED_LOW:
-		speed = "low";
-		break;
-	case USB_SPEED_FULL:
-		speed = "full";
-		break;
-	case USB_SPEED_HIGH:
-		speed = "high";
-		break;
-	default:
-		speed = "?";
-		break;
-	}
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
-
-	switch (qh->ep_type) {
-	case USB_ENDPOINT_XFER_ISOC:
-		type = "isochronous";
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		type = "interrupt";
-		break;
-	case USB_ENDPOINT_XFER_CONTROL:
-		type = "control";
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		type = "bulk";
-		break;
-	default:
-		type = "?";
-		break;
-	}
-	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n",type);
-
-#ifdef DEBUG
-	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
-			    qh->usecs);
-		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
-			    qh->interval);
-	}
-#endif
-
-	return;
-}
-
-/**
- * Microframe scheduler
- * track the total use in hcd->frame_usecs
- * keep each qh use in qh->frame_usecs
- * when surrendering the qh then donate the time back
- */
-static const u16 max_uframe_usecs[] = { 100, 100, 100, 100, 100, 100, 30, 0 };
-
-/*
- * called from dwc_otg_hcd.c:dwc_otg_hcd_init
- */
-int init_hcd_usecs(dwc_otg_hcd_t *hcd)
-{
-	int i;
-
-	for (i = 0; i < 8; i++)
-		hcd->frame_usecs[i] = max_uframe_usecs[i];
-
-	return 0;
-}
-
-static int find_single_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	int i;
-	u16 utime;
-	int t_left;
-	int ret;
-	int done;
-
-	ret = -1;
-	utime = qh->usecs;
-	t_left = utime;
-	i = 0;
-	done = 0;
-	while (done == 0) {
-		/* At the start hcd->frame_usecs[i] = max_uframe_usecs[i]; */
-		if (utime <= hcd->frame_usecs[i]) {
-			hcd->frame_usecs[i] -= utime;
-			qh->frame_usecs[i] += utime;
-			t_left -= utime;
-			ret = i;
-			done = 1;
-			return ret;
-		} else {
-			i++;
-			if (i == 8) {
-				done = 1;
-				ret = -1;
-			}
-		}
-	}
-	return ret;
-}
-
-/*
- * use this for FS apps that can span multiple uframes
- */
-static int find_multi_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	int i;
-	int j;
-	u16 utime;
-	int t_left;
-	int ret;
-	int done;
-	u16 xtime;
-
-	ret = -1;
-	utime = qh->usecs;
-	t_left = utime;
-	i = 0;
-	done = 0;
-loop:
-	while (done == 0) {
-		if (hcd->frame_usecs[i] <= 0) {
-			i++;
-			if (i == 8) {
-				done = 1;
-				ret = -1;
-			}
-			goto loop;
-		}
-
-		/*
-		 * We need n consequtive slots so use j as a start slot.
-		 * j plus j+1 must be enough time (for now)
-		 */
-		xtime = hcd->frame_usecs[i];
-		for (j = i + 1; j < 8; j++) {
-			/*
-			 * if we add this frame remaining time to xtime we may
-			 * be OK, if not we need to test j for a complete frame.
-			 */
-			if ((xtime + hcd->frame_usecs[j]) < utime) {
-				if (hcd->frame_usecs[j] < max_uframe_usecs[j]) {
-					j = 8;
-					ret = -1;
-					continue;
-				}
-			}
-			if (xtime >= utime) {
-				ret = i;
-				j = 8;	/* stop loop with a good value ret */
-				continue;
-			}
-			/* add the frame time to x time */
-			xtime += hcd->frame_usecs[j];
-			/* we must have a fully available next frame or break */
-			if ((xtime < utime) &&
-			    (hcd->frame_usecs[j] == max_uframe_usecs[j])) {
-				ret = -1;
-				j = 8;	/* stop loop with a bad value ret */
-				continue;
-			}
-		}
-		if (ret >= 0) {
-			t_left = utime;
-			for (j = i; (t_left > 0) && (j < 8); j++) {
-				t_left -= hcd->frame_usecs[j];
-				if (t_left <= 0) {
-					qh->frame_usecs[j] +=
-					    hcd->frame_usecs[j] + t_left;
-					hcd->frame_usecs[j] = -t_left;
-					ret = i;
-					done = 1;
-				} else {
-					qh->frame_usecs[j] +=
-					    hcd->frame_usecs[j];
-					hcd->frame_usecs[j] = 0;
-				}
-			}
-		} else {
-			i++;
-			if (i == 8) {
-				done = 1;
-				ret = -1;
-			}
-		}
-	}
-	return ret;
-}
-
-static int find_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	int ret = -1;
-
-	if (qh->speed == USB_SPEED_HIGH)
-		/* if this is a hs transaction we need a full frame */
-		ret = find_single_uframe(hcd, qh);
-	else
-		/* FS transaction may need a sequence of frames */
-		ret = find_multi_uframe(hcd, qh);
-
-	return ret;
-}
-
-/**
- * Checks that the max transfer size allowed in a host channel is large enough
- * to handle the maximum data transfer in a single (micro)frame for a periodic
- * transfer.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param qh QH for a periodic endpoint.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	int		status;
-	uint32_t 	max_xfer_size;
-	uint32_t	max_channel_xfer_size;
-
-	status = 0;
-
-	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
-	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
-
-	if (max_xfer_size > max_channel_xfer_size) {
-		DWC_NOTICE("%s: Periodic xfer length %d > "
-			    "max xfer length for channel %d\n",
-			    __func__, max_xfer_size, max_channel_xfer_size);
-		status = -ENOSPC;
-	}
-
-	return status;
-}
-
-/**
- * Schedules an interrupt or isochronous transfer in the periodic schedule.
- */
-static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	int status;
-	struct usb_bus *bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
-	int frame;
-	int num_channels;
-
-	num_channels = hcd->core_if->core_params->host_channels;
-
-	if ((hcd->periodic_channels < num_channels - 1)) {
-	  if (hcd->periodic_channels + hcd->nakking_channels >= num_channels) {
-	    /* All non-periodic channels are nakking? Halt
-	     * one to make room (as long as there is at
-	     * least one channel for non-periodic transfers,
-	     * all the blocking non-periodics can time-share
-	     * that one channel. */
-	    dwc_hc_t *hc = dwc_otg_halt_nakking_channel(hcd);
-	    if (hc)
-	      DWC_DEBUGPL(DBG_HCD, "Out of Host Channels for periodic transfer - Halting channel %d (dev %d ep%d%s)\n", hc->hc_num, hc->dev_addr, hc->ep_num, (hc->ep_is_in ? "in" : "out"));
-	  }
-	  /* It could be that all channels are currently occupied,
-	   * but in that case one will be freed up soon (either
-	   * because it completed or because it was forced to halt
-	   * above). */
-	}
-	status = find_uframe(hcd, qh);
-	frame = -1;
-	if (status == 0) {
-		frame = 7;
-	} else {
-		if (status > 0)
-			frame = status - 1;
-	}
-	/* Set the new frame up */
-	if (frame > -1) {
-		qh->sched_frame &= ~0x7;
-		qh->sched_frame |= (frame & 7);
-	}
-	if (status != -1)
-		status = 0;
-	if (status) {
-		pr_notice("%s: Insufficient periodic bandwidth for "
-			  "periodic transfer.\n", __func__);
-		return status;
-	}
-	status = check_max_xfer_size(hcd, qh);
-	if (status) {
-		pr_notice("%s: Channel max transfer size too small "
-			  "for periodic transfer.\n", __func__);
-		return status;
-	}
-	/* Always start in the inactive schedule. */
-	list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
-
-	hcd->periodic_channels++;
-
-	/* Update claimed usecs per (micro)frame. */
-	hcd->periodic_usecs += qh->usecs;
-
-	/*
-	 * Update average periodic bandwidth claimed and # periodic reqs for
-	 * usbfs.
-	 */
-	bus->bandwidth_allocated += qh->usecs / qh->interval;
-
-	if (qh->ep_type == USB_ENDPOINT_XFER_INT)
-		bus->bandwidth_int_reqs++;
-	else
-		bus->bandwidth_isoc_reqs++;
-
-	return status;
-}
-
-/**
- * This function adds a QH to either the non periodic or periodic schedule if
- * it is not already in the schedule. If the QH is already in the schedule, no
- * action is taken.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	//unsigned long flags;
-	int status = 0;
-
-#ifdef CONFIG_SMP
-	//the spinlock is locked before this function get called,
-	//but in case the lock is needed, the check function is preserved
-	//but in non-SMP mode, all spinlock is lockable.
-	//don't do the test in non-SMP mode
-
-	if(spin_trylock(&hcd->lock)) {
-		printk("%s: It is not supposed to be lockable!!\n",__func__);
-		BUG();
-	}
-#endif
-//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-
-	if (!list_empty(&qh->qh_list_entry)) {
-		/* QH already in a schedule. */
-		goto done;
-	}
-
-	/* Add the new QH to the appropriate schedule */
-	if (dwc_qh_is_non_per(qh)) {
-		/* Always start in the inactive schedule. */
-		list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
-	} else {
-		status = schedule_periodic(hcd, qh);
-	}
-
- done:
-//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-
-	return status;
-}
-
-/**
- * Removes an interrupt or isochronous transfer from the periodic schedule.
- */
-static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	struct usb_bus *bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
-	int i;
-
-	list_del_init(&qh->qh_list_entry);
-
-	hcd->periodic_channels--;
-
-	/* Update claimed usecs per (micro)frame. */
-	hcd->periodic_usecs -= qh->usecs;
-	for (i = 0; i < 8; i++) {
-		hcd->frame_usecs[i] += qh->frame_usecs[i];
-		qh->frame_usecs[i] = 0;
-	}
-	/*
-	 * Update average periodic bandwidth claimed and # periodic reqs for
-	 * usbfs.
-	 */
-	bus->bandwidth_allocated -= qh->usecs / qh->interval;
-
-	if (qh->ep_type == USB_ENDPOINT_XFER_INT)
-		bus->bandwidth_int_reqs--;
-	else
-		bus->bandwidth_isoc_reqs--;
-}
-
-/**
- * Removes a QH from either the non-periodic or periodic schedule.  Memory is
- * not freed.
- *
- * @param[in] hcd The HCD state structure.
- * @param[in] qh QH to remove from schedule. */
-void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
-	//unsigned long flags;
-
-#ifdef CONFIG_SMP
-	//the spinlock is locked before this function get called,
-	//but in case the lock is needed, the check function is preserved
-	//but in non-SMP mode, all spinlock is lockable.
-	//don't do the test in non-SMP mode
-
-	if(spin_trylock(&hcd->lock)) {
-		printk("%s: It is not supposed to be lockable!!\n",__func__);
-		BUG();
-	}
-#endif
-//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-
-	if (list_empty(&qh->qh_list_entry)) {
-		/* QH is not in a schedule. */
-		goto done;
-	}
-
-	if (dwc_qh_is_non_per(qh)) {
-		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
-			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-		}
-		list_del_init(&qh->qh_list_entry);
-	} else {
-		deschedule_periodic(hcd, qh);
-	}
-
- done:
-//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-	return;
-}
-
-/**
- * Deactivates a QH. For non-periodic QHs, removes the QH from the active
- * non-periodic schedule. The QH is added to the inactive non-periodic
- * schedule if any QTDs are still attached to the QH.
- *
- * For periodic QHs, the QH is removed from the periodic queued schedule. If
- * there are any QTDs still attached to the QH, the QH is added to either the
- * periodic inactive schedule or the periodic ready schedule and its next
- * scheduled frame is calculated. The QH is placed in the ready schedule if
- * the scheduled frame has been reached already. Otherwise it's placed in the
- * inactive schedule. If there are no QTDs attached to the QH, the QH is
- * completely removed from the periodic schedule.
- */
-void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
-{
-	if (dwc_qh_is_non_per(qh)) {
-		dwc_otg_hcd_qh_remove(hcd, qh);
-		if (!list_empty(&qh->qtd_list)) {
-			/* Add back to inactive non-periodic schedule. */
-			dwc_otg_hcd_qh_add(hcd, qh);
-		}
-	} else {
-		uint16_t frame_number =	dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-
-		if (qh->do_split) {
-			/* Schedule the next continuing periodic split transfer */
-			if (sched_next_periodic_split) {
-
-				qh->sched_frame = frame_number;
-				if (dwc_frame_num_le(frame_number,
-						     dwc_frame_num_inc(qh->start_split_frame, 1))) {
-					/*
-					 * Allow one frame to elapse after start
-					 * split microframe before scheduling
-					 * complete split, but DONT if we are
-					 * doing the next start split in the
-					 * same frame for an ISOC out.
-					 */
-					if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
-						qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
-					}
-				}
-			} else {
-				qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
-								     qh->interval);
-				if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-					qh->sched_frame = frame_number;
-				}
-				qh->sched_frame |= 0x7;
-				qh->start_split_frame = qh->sched_frame;
-			}
-		} else {
-			qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
-			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-				qh->sched_frame = frame_number;
-			}
-		}
-
-		if (list_empty(&qh->qtd_list)) {
-			dwc_otg_hcd_qh_remove(hcd, qh);
-		} else {
-			/*
-			 * Remove from periodic_sched_queued and move to
-			 * appropriate queue.
-			 */
-			if (qh->sched_frame == frame_number) {
-				list_move(&qh->qh_list_entry,
-					  &hcd->periodic_sched_ready);
-			} else {
-				list_move(&qh->qh_list_entry,
-					  &hcd->periodic_sched_inactive);
-			}
-		}
-	}
-}
-
-/**
- * This function allocates and initializes a QTD.
- *
- * @param[in] urb The URB to create a QTD from.  Each URB-QTD pair will end up
- * pointing to each other so each pair should have a unique correlation.
- *
- * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
-{
-	dwc_otg_qtd_t *qtd;
-
-	qtd = dwc_otg_hcd_qtd_alloc ();
-	if (qtd == NULL) {
-		return NULL;
-	}
-
-	dwc_otg_hcd_qtd_init (qtd, urb);
-	return qtd;
-}
-
-/**
- * Initializes a QTD structure.
- *
- * @param[in] qtd The QTD to initialize.
- * @param[in] urb The URB to use for initialization.  */
-void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
-{
-	memset (qtd, 0, sizeof (dwc_otg_qtd_t));
-	qtd->urb = urb;
-	if (usb_pipecontrol(urb->pipe)) {
-		/*
-		 * The only time the QTD data toggle is used is on the data
-		 * phase of control transfers. This phase always starts with
-		 * DATA1.
-		 */
-		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
-	}
-
-	/* start split */
-	qtd->complete_split = 0;
-	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-	qtd->isoc_split_offset = 0;
-
-	/* Store the qtd ptr in the urb to reference what QTD. */
-	urb->hcpriv = qtd;
-	return;
-}
-
-/**
- * This function adds a QTD to the QTD-list of a QH.  It will find the correct
- * QH to place the QTD into.  If it does not find a QH, then it will create a
- * new QH. If the QH to which the QTD is added is not currently scheduled, it
- * is placed into the proper schedule based on its EP type.
- *
- * @param[in] qtd The QTD to add
- * @param[in] dwc_otg_hcd The DWC HCD structure
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
-			 dwc_otg_hcd_t *dwc_otg_hcd)
-{
-	struct usb_host_endpoint *ep;
-	dwc_otg_qh_t *qh;
-	int retval = 0;
-
-	struct urb *urb = qtd->urb;
-
-	/*
-	 * Get the QH which holds the QTD-list to insert to. Create QH if it
-	 * doesn't exist.
-	 */
-	usb_hcd_link_urb_to_ep(dwc_otg_hcd_to_hcd(dwc_otg_hcd), urb);
-	ep = dwc_urb_to_endpoint(urb);
-	qh = (dwc_otg_qh_t *)ep->hcpriv;
-	if (qh == NULL) {
-		qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
-		if (qh == NULL) {
-			usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(dwc_otg_hcd), urb);
-			retval = -ENOMEM;
-			goto done;
-		}
-		ep->hcpriv = qh;
-	}
-
-	retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
-	if (retval == 0) {
-		list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
-	} else {
-		usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(dwc_otg_hcd), urb);
-	}
-
- done:
-	return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.c
deleted file mode 100644
index 967997c..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.c
+++ /dev/null
@@ -1,2418 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
- * $Revision: #70 $
- * $Date: 2008/10/14 $
- * $Change: 1115682 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-
-/** @file
- * This file implements the Peripheral Controller Driver.
- *
- * The Peripheral Controller Driver (PCD) is responsible for
- * translating requests from the Function Driver into the appropriate
- * actions on the DWC_otg controller. It isolates the Function Driver
- * from the specifics of the controller by providing an API to the
- * Function Driver.
- *
- * The Peripheral Controller Driver for Linux will implement the
- * Gadget API, so that the existing Gadget drivers can be used.
- * (Gadget Driver is the Linux terminology for a Function Driver.)
- *
- * The Linux Gadget API is defined in the header file
- * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
- * defined in the structure <code>usb_ep_ops</code> and the USB
- * Controller API is defined in the structure
- * <code>usb_gadget_ops</code>.
- *
- * An important function of the PCD is managing interrupts generated
- * by the DWC_otg controller. The implementation of the DWC_otg device
- * mode interrupt service routines is in dwc_otg_pcd_intr.c.
- *
- * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
- * @todo Does it work when the request size is greater than DEPTSIZ
- * transfer size
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-
-#include <linux/usb/ch9.h>
-
-//#include <linux/usb_gadget.h>
-
-#include "otg_driver.h"
-#include "otg_pcd.h"
-
-
-
-/**
- * Static PCD pointer for use in usb_gadget_register_driver and
- * usb_gadget_unregister_driver.  Initialized in dwc_otg_pcd_init.
- */
-static	 dwc_otg_pcd_t *s_pcd = 0;
-
-
-/* Display the contents of the buffer */
-extern void dump_msg(const u8 *buf, unsigned int length);
-
-
-/**
- * This function completes a request.  It call's the request call back.
- */
-void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
-				  int status)
-{
-	unsigned stopped = ep->stopped;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
-	list_del_init(&req->queue);
-
-	if (req->req.status == -EINPROGRESS) {
-		req->req.status = status;
-	} else {
-		status = req->req.status;
-	}
-
-	/* don't modify queue heads during completion callback */
-	ep->stopped = 1;
-	SPIN_UNLOCK(&ep->pcd->lock);
-	req->req.complete(&ep->ep, &req->req);
-	SPIN_LOCK(&ep->pcd->lock);
-
-	if (ep->pcd->request_pending > 0) {
-		--ep->pcd->request_pending;
-	}
-
-	ep->stopped = stopped;
-}
-
-/**
- * This function terminates all the requsts in the EP request queue.
- */
-void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_otg_pcd_request_t *req;
-
-	ep->stopped = 1;
-
-	/* called with irqs blocked?? */
-	while (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-				 queue);
-		dwc_otg_request_done(ep, req, -ESHUTDOWN);
-	}
-}
-
-/* USB Endpoint Operations */
-/*
- * The following sections briefly describe the behavior of the Gadget
- * API endpoint operations implemented in the DWC_otg driver
- * software. Detailed descriptions of the generic behavior of each of
- * these functions can be found in the Linux header file
- * include/linux/usb_gadget.h.
- *
- * The Gadget API provides wrapper functions for each of the function
- * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
- * function, which then calls the underlying PCD function. The
- * following sections are named according to the wrapper
- * functions. Within each section, the corresponding DWC_otg PCD
- * function name is specified.
- *
- */
-
-/**
- * This function assigns periodic Tx FIFO to an periodic EP
- * in shared Tx FIFO mode
- */
-static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t	*core_if)
-{
-	uint32_t PerTxMsk = 1;
-	int i;
-	for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
-	{
-		if((PerTxMsk & core_if->p_tx_msk) == 0) {
-			core_if->p_tx_msk |= PerTxMsk;
-			return i + 1;
-		}
-		PerTxMsk <<= 1;
-	}
-	return 0;
-}
-/**
- * This function releases periodic Tx FIFO
- * in shared Tx FIFO mode
- */
-static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-{
-	core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
-}
-/**
- * This function assigns periodic Tx FIFO to an periodic EP
- * in shared Tx FIFO mode
- */
-static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
-{
-	uint32_t TxMsk = 1;
-	int i;
-
-	for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
-	{
-		if((TxMsk & core_if->tx_msk) == 0) {
-			core_if->tx_msk |= TxMsk;
-			return i + 1;
-		}
-		TxMsk <<= 1;
-	}
-	return 0;
-}
-/**
- * This function releases periodic Tx FIFO
- * in shared Tx FIFO mode
- */
-static void release_tx_fifo(dwc_otg_core_if_t	*core_if, uint32_t fifo_num)
-{
-	core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
-}
-
-/**
- * This function is called by the Gadget Driver for each EP to be
- * configured for the current configuration (SET_CONFIGURATION).
- *
- * This function initializes the dwc_otg_ep_t data structure, and then
- * calls dwc_otg_ep_activate.
- */
-static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
-				 const struct usb_endpoint_descriptor *ep_desc)
-{
-	dwc_otg_pcd_ep_t *ep = 0;
-	dwc_otg_pcd_t *pcd = 0;
-	unsigned long flags;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	if (!usb_ep || !ep_desc || ep->desc ||
-			ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
-		DWC_WARN("%s, bad ep or descriptor\n", __func__);
-		return -EINVAL;
-	}
-	if (ep == &ep->pcd->ep0) {
-		DWC_WARN("%s, bad ep(0)\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Check FIFO size? */
-	if (!ep_desc->wMaxPacketSize) {
-		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
-		return -ERANGE;
-	}
-
-	pcd = ep->pcd;
-	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-		DWC_WARN("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
-	ep->desc = ep_desc;
-	ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
-
-	/*
-	 * Activate the EP
-	 */
-	ep->stopped = 0;
-
-	ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
-	ep->dwc_ep.maxpacket = ep->ep.maxpacket;
-
-	ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
-	if(ep->dwc_ep.is_in) {
-		if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
-			ep->dwc_ep.tx_fifo_num = 0;
-
-			if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
-				/*
-				 * if ISOC EP then assign a Periodic Tx FIFO.
-				 */
-				ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
-			 }
-		} else {
-			/*
-			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
-			 */
-			ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
-
-		}
-	}
-	/* Set initial data PID. */
-	if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
-		ep->dwc_ep.data_pid_start = 0;
-	}
-
-	DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
-					ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
-					ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
-
-	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
-		ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-	}
-
-	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
-	return 0;
-}
-
-/**
- * This function is called when an EP is disabled due to disconnect or
- * change in configuration. Any pending requests will terminate with a
- * status of -ESHUTDOWN.
- *
- * This function modifies the dwc_otg_ep_t data structure for this EP,
- * and then calls dwc_otg_ep_deactivate.
- */
-static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
-{
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t *pcd = 0;
-	unsigned long flags;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	if (!usb_ep || !ep->desc) {
-		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
-			usb_ep ? ep->ep.name : NULL);
-		return -EINVAL;
-	}
-
-	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
-	dwc_otg_request_nuke(ep);
-
-	dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-	ep->desc = 0;
-	ep->stopped = 1;
-
-	if(ep->dwc_ep.is_in) {
-		dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-		release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-		release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-	}
-
-	/* Free DMA Descriptors */
-	pcd = ep->pcd;
-
-	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-
-	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
-		dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-	}
-
-	DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
-	return 0;
-}
-
-
-/**
- * This function allocates a request object to use with the specified
- * endpoint.
- *
- * @param ep The endpoint to be used with with the request
- * @param gfp_flags the GFP_* flags to use.
- */
-static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
-						     gfp_t gfp_flags)
-{
-	dwc_otg_pcd_request_t *req;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
-	if (0 == ep) {
-		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
-		return 0;
-	}
-	req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
-	if (0 == req) {
-		DWC_WARN("%s() %s\n", __func__,
-				 "request allocation failed!\n");
-		return 0;
-	}
-	memset(req, 0, sizeof(dwc_otg_pcd_request_t));
-	req->req.dma = DMA_ADDR_INVALID;
-	INIT_LIST_HEAD(&req->queue);
-	return &req->req;
-}
-
-/**
- * This function frees a request object.
- *
- * @param ep The endpoint associated with the request
- * @param req The request being freed
- */
-static void dwc_otg_pcd_free_request(struct usb_ep *ep,
-					 struct usb_request *req)
-{
-	dwc_otg_pcd_request_t *request;
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
-
-	if (0 == ep || 0 == req) {
-		DWC_WARN("%s() %s\n", __func__,
-				 "Invalid ep or req argument!\n");
-		return;
-	}
-
-	request = container_of(req, dwc_otg_pcd_request_t, req);
-	kfree(request);
-}
-
-#if 0
-/**
- * This function allocates an I/O buffer to be used for a transfer
- * to/from the specified endpoint.
- *
- * @param usb_ep The endpoint to be used with with the request
- * @param bytes The desired number of bytes for the buffer
- * @param dma Pointer to the buffer's DMA address; must be valid
- * @param gfp_flags the GFP_* flags to use.
- * @return address of a new buffer or null is buffer could not be allocated.
- */
-static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
-				      dma_addr_t *dma,
-				      gfp_t gfp_flags)
-{
-	void *buf;
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t *pcd = 0;
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	pcd = ep->pcd;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
-				dma, gfp_flags);
-
-	/* Check dword alignment */
-	if ((bytes & 0x3UL) != 0) {
-		DWC_WARN("%s() Buffer size is not a multiple of"
-				 "DWORD size (%d)",__func__, bytes);
-	}
-
-	if (GET_CORE_IF(pcd)->dma_enable) {
-		buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
-	}
-	else {
-		buf = kmalloc(bytes, gfp_flags);
-	}
-
-	/* Check dword alignment */
-	if (((int)buf & 0x3UL) != 0) {
-		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
-					__func__, buf);
-	}
-
-	return buf;
-}
-
-/**
- * This function frees an I/O buffer that was allocated by alloc_buffer.
- *
- * @param usb_ep the endpoint associated with the buffer
- * @param buf address of the buffer
- * @param dma The buffer's DMA address
- * @param bytes The number of bytes of the buffer
- */
-static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
-					dma_addr_t dma, unsigned bytes)
-{
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t *pcd = 0;
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	pcd = ep->pcd;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
-
-	if (GET_CORE_IF(pcd)->dma_enable) {
-		dma_free_coherent (NULL, bytes, buf, dma);
-	}
-	else {
-		kfree(buf);
-	}
-}
-#endif
-
-/**
- * This function is used to submit an I/O Request to an EP.
- *
- *	- When the request completes the request's completion callback
- *	  is called to return the request to the driver.
- *	- An EP, except control EPs, may have multiple requests
- *	  pending.
- *	- Once submitted the request cannot be examined or modified.
- *	- Each request is turned into one or more packets.
- *	- A BULK EP can queue any amount of data; the transfer is
- *	  packetized.
- *	- Zero length Packets are specified with the request 'zero'
- *	  flag.
- */
-static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
-				struct usb_request *usb_req,
-				gfp_t gfp_flags)
-{
-	int prevented = 0;
-	dwc_otg_pcd_request_t *req;
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t	*pcd;
-	unsigned long flags = 0;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
-			__func__, usb_ep, usb_req, gfp_flags);
-
-	req = container_of(usb_req, dwc_otg_pcd_request_t, req);
-	if (!usb_req || !usb_req->complete || !usb_req->buf ||
-			!list_empty(&req->queue)) {
-		DWC_WARN("%s, bad params\n", __func__);
-		return -EINVAL;
-	}
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
-		DWC_WARN("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	pcd = ep->pcd;
-	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-		DWC_WARN("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-
-	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
-			   usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-
-	if (!GET_CORE_IF(pcd)->core_params->opt) {
-		if (ep->dwc_ep.num != 0) {
-			DWC_ERROR("%s queue req %p, len %d buf %p\n",
-					  usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-		}
-	}
-
-	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
-#if defined(DEBUG) & defined(VERBOSE)
-	dump_msg(usb_req->buf, usb_req->length);
-#endif
-
-	usb_req->status = -EINPROGRESS;
-	usb_req->actual = 0;
-
-	/*
-	 * For EP0 IN without premature status, zlp is required?
-	 */
-	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
-		DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
-		//_req->zero = 1;
-	}
-
-	/* Start the transfer */
-	if (list_empty(&ep->queue) && !ep->stopped) {
-		/* EP0 Transfer? */
-		if (ep->dwc_ep.num == 0) {
-			switch (pcd->ep0state) {
-			case EP0_IN_DATA_PHASE:
-				DWC_DEBUGPL(DBG_PCD,
-						"%s ep0: EP0_IN_DATA_PHASE\n",
-						__func__);
-				break;
-
-			case EP0_OUT_DATA_PHASE:
-				DWC_DEBUGPL(DBG_PCD,
-						"%s ep0: EP0_OUT_DATA_PHASE\n",
-						__func__);
-				if (pcd->request_config) {
-					/* Complete STATUS PHASE */
-					ep->dwc_ep.is_in = 1;
-					pcd->ep0state = EP0_IN_STATUS_PHASE;
-				}
-				break;
-
-			case EP0_IN_STATUS_PHASE:
-				DWC_DEBUGPL(DBG_PCD,
-						"%s ep0: EP0_IN_STATUS_PHASE\n",
-						__func__);
-				break;
-
-			default:
-				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
-						pcd->ep0state);
-				SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-				return -EL2HLT;
-			}
-			ep->dwc_ep.dma_addr = usb_req->dma;
-			ep->dwc_ep.start_xfer_buff = usb_req->buf;
-			ep->dwc_ep.xfer_buff = usb_req->buf;
-			ep->dwc_ep.xfer_len = usb_req->length;
-			ep->dwc_ep.xfer_count = 0;
-			ep->dwc_ep.sent_zlp = 0;
-			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-
-			if(usb_req->zero) {
-				if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
-						&& (ep->dwc_ep.xfer_len != 0)) {
-					ep->dwc_ep.sent_zlp = 1;
-				}
-
-			}
-
-			ep_check_and_patch_dma_addr(ep);
-			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-		}
-		else {
-
-			uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-
-			/* Setup and start the Transfer */
-			ep->dwc_ep.dma_addr = usb_req->dma;
-			ep->dwc_ep.start_xfer_buff = usb_req->buf;
-			ep->dwc_ep.xfer_buff = usb_req->buf;
-			ep->dwc_ep.sent_zlp = 0;
-			ep->dwc_ep.total_len = usb_req->length;
-			ep->dwc_ep.xfer_len = 0;
-			ep->dwc_ep.xfer_count = 0;
-
-			if(max_transfer > MAX_TRANSFER_SIZE) {
-				ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-			} else {
-				ep->dwc_ep.maxxfer = max_transfer;
-			}
-
-			if(usb_req->zero) {
-				if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-						&& (ep->dwc_ep.total_len != 0)) {
-					ep->dwc_ep.sent_zlp = 1;
-				}
-
-			}
-
-			ep_check_and_patch_dma_addr(ep);
-			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-		}
-	}
-
-	if ((req != 0) || prevented) {
-		++pcd->request_pending;
-		list_add_tail(&req->queue, &ep->queue);
-		if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
-			/** @todo NGS Create a function for this. */
-			diepmsk_data_t diepmsk = { .d32 = 0};
-			diepmsk.b.intktxfemp = 1;
-			if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
-				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
-							0, diepmsk.d32);
-			} else {
-				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
-			}
-		}
-	}
-
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-	return 0;
-}
-
-/**
- * This function cancels an I/O request from an EP.
- */
-static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
-				  struct usb_request *usb_req)
-{
-	dwc_otg_pcd_request_t *req;
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t	*pcd;
-	unsigned long flags;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-	if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
-		DWC_WARN("%s, bad argument\n", __func__);
-		return -EINVAL;
-	}
-	pcd = ep->pcd;
-	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-		DWC_WARN("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-	DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
-					ep->dwc_ep.is_in ? "IN" : "OUT",
-					usb_req);
-
-	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry(req, &ep->queue, queue)
-	{
-		if (&req->req == usb_req) {
-			break;
-		}
-	}
-
-	if (&req->req != usb_req) {
-		SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-		return -EINVAL;
-	}
-
-	if (!list_empty(&req->queue)) {
-		dwc_otg_request_done(ep, req, -ECONNRESET);
-	}
-	else {
-		req = 0;
-	}
-
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
-	return req ? 0 : -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_set_halt stalls an endpoint.
- *
- * usb_ep_clear_halt clears an endpoint halt and resets its data
- * toggle.
- *
- * Both of these functions are implemented with the same underlying
- * function. The behavior depends on the value argument.
- *
- * @param[in] usb_ep the Endpoint to halt or clear halt.
- * @param[in] value
- *	- 0 means clear_halt.
- *	- 1 means set_halt,
- *	- 2 means clear stall lock flag.
- *	- 3 means set  stall lock flag.
- */
-static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
-{
-	int retval = 0;
-	unsigned long flags;
-	dwc_otg_pcd_ep_t *ep = 0;
-
-
-	DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
-	if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
-			ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-		DWC_WARN("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-	if (!list_empty(&ep->queue)) {
-		DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
-		retval = -EAGAIN;
-	}
-	else if (value == 0) {
-		dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
-					&ep->dwc_ep);
-	}
-	else if(value == 1) {
-		if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
-			dtxfsts_data_t txstatus;
-			fifosize_data_t txfifosize;
-
-			txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
-			txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
-
-			if(txstatus.b.txfspcavail < txfifosize.b.depth) {
-				DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
-				retval = -EAGAIN;
-			}
-			else {
-				if (ep->dwc_ep.num == 0) {
-					ep->pcd->ep0state = EP0_STALL;
-				}
-
-				ep->stopped = 1;
-				dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-							&ep->dwc_ep);
-			}
-		}
-		else {
-			if (ep->dwc_ep.num == 0) {
-				ep->pcd->ep0state = EP0_STALL;
-			}
-
-			ep->stopped = 1;
-			dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-						&ep->dwc_ep);
-		}
-	}
-	else if (value == 2) {
-		ep->dwc_ep.stall_clear_flag = 0;
-	}
-	else if (value == 3) {
-		ep->dwc_ep.stall_clear_flag = 1;
-	}
-
-	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-	return retval;
-}
-
-/**
- * This function allocates a DMA Descriptor chain for the Endpoint
- * buffer to be used for a transfer to/from the specified endpoint.
- */
-dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
-{
-
-	return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
-}
-
-LIST_HEAD(tofree_list);
-DEFINE_SPINLOCK(tofree_list_lock);
-
-struct free_param {
-	struct list_head list;
-
-	void* addr;
-	dma_addr_t dma_addr;
-	uint32_t size;
-};
-static void free_list_agent_fn(struct work_struct *work) {
-	struct list_head free_list;
-	struct free_param *cur,*next;
-
-	spin_lock(&tofree_list_lock);
-	list_add(&free_list,&tofree_list);
-	list_del_init(&tofree_list);
-	spin_unlock(&tofree_list_lock);
-
-	list_for_each_entry_safe(cur,next,&free_list,list){
-		if(&cur->list==&free_list) break;
-		dma_free_coherent(NULL,cur->size,cur->addr,cur->dma_addr);
-		list_del(&cur->list);
-		kfree(cur);
-	}
-}
-DECLARE_WORK(free_list_agent,free_list_agent_fn);
-/**
- * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
- */
-void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
-{
-	if(irqs_disabled()){
-		struct free_param* fp=kmalloc(sizeof(struct free_param),GFP_KERNEL);
-		fp->addr=desc_addr;
-		fp->dma_addr=dma_desc_addr;
-		fp->size=count*sizeof(dwc_otg_dma_desc_t);
-
-		spin_lock(&tofree_list_lock);
-		list_add(&fp->list,&tofree_list);
-		spin_unlock(&tofree_list_lock);
-
-		schedule_work(&free_list_agent);
-		return ;
-	}
-	dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
-}
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
-
- 	dsts_data_t 		dsts = { .d32 = 0};
-	depctl_data_t 		depctl = { .d32 = 0 };
-	volatile uint32_t 	*addr;
- 	int 			i, j;
-
-	if(dwc_ep->is_in)
-		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
-	else
-		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-
-
-	/** Allocate descriptors for double buffering */
-	dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
-	if(dwc_ep->desc_addr) {
-		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
-		return;
-	}
-
-	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
-	/** ISO OUT EP */
-	if(dwc_ep->is_in == 0) {
-		desc_sts_data_t sts = { .d32 =0 };
-		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-		dma_addr_t dma_ad;
-		uint32_t data_per_desc;
-		dwc_otg_dev_out_ep_regs_t *out_regs =
-			core_if->dev_if->out_ep_regs[dwc_ep->num];
-		int	offset;
-
-		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-		dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
-
-		/** Buffer 0 descriptors setup */
-		dma_ad = dwc_ep->dma_addr0;
-
-		sts.b_iso_out.bs = BS_HOST_READY;
-		sts.b_iso_out.rxsts = 0;
-		sts.b_iso_out.l = 0;
-		sts.b_iso_out.sp = 0;
-		sts.b_iso_out.ioc = 0;
-		sts.b_iso_out.pid = 0;
-		sts.b_iso_out.framenum = 0;
-
-		offset = 0;
-		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-		{
-
-			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-			{
-				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-
-				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-				sts.b_iso_out.rxbytes = data_per_desc;
-				writel((uint32_t)dma_ad, &dma_desc->buf);
-				writel(sts.d32, &dma_desc->status);
-
-				offset += data_per_desc;
-				dma_desc ++;
-				//(uint32_t)dma_ad += data_per_desc;
-				dma_ad = (uint32_t)dma_ad + data_per_desc;
-			}
-		}
-
-		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-		{
-			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-			sts.b_iso_out.rxbytes = data_per_desc;
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-
-			offset += data_per_desc;
-			dma_desc ++;
-			//(uint32_t)dma_ad += data_per_desc;
-			dma_ad = (uint32_t)dma_ad + data_per_desc;
-		}
-
-		sts.b_iso_out.ioc = 1;
-		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-		sts.b_iso_out.rxbytes = data_per_desc;
-
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-		dma_desc ++;
-
-		/** Buffer 1 descriptors setup */
-		sts.b_iso_out.ioc = 0;
-		dma_ad = dwc_ep->dma_addr1;
-
-		offset = 0;
-		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-		{
-			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-			{
-				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-				sts.b_iso_out.rxbytes = data_per_desc;
-				writel((uint32_t)dma_ad, &dma_desc->buf);
-				writel(sts.d32, &dma_desc->status);
-
-				offset += data_per_desc;
-				dma_desc ++;
-				//(uint32_t)dma_ad += data_per_desc;
-				dma_ad = (uint32_t)dma_ad + data_per_desc;
-			}
-		}
-		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-		{
-			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-			sts.b_iso_out.rxbytes = data_per_desc;
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-
-			offset += data_per_desc;
-			dma_desc ++;
-			//(uint32_t)dma_ad += data_per_desc;
-			dma_ad = (uint32_t)dma_ad + data_per_desc;
-		}
-
-		sts.b_iso_out.ioc = 1;
-		sts.b_iso_out.l = 1;
-		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-		sts.b_iso_out.rxbytes = data_per_desc;
-
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-
-		dwc_ep->next_frame = 0;
-
-		/** Write dma_ad into DOEPDMA register */
-		dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-
-	}
-	/** ISO IN EP */
-	else {
-		desc_sts_data_t sts = { .d32 =0 };
-		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-		dma_addr_t dma_ad;
-		dwc_otg_dev_in_ep_regs_t *in_regs =
-			core_if->dev_if->in_ep_regs[dwc_ep->num];
-		unsigned int		   frmnumber;
-		fifosize_data_t		txfifosize,rxfifosize;
-
-		txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
-		rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
-
-
-		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-
-		dma_ad = dwc_ep->dma_addr0;
-
-		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
-		sts.b_iso_in.bs = BS_HOST_READY;
-		sts.b_iso_in.txsts = 0;
-		sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
-		sts.b_iso_in.ioc = 0;
-		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-
-
-		frmnumber = dwc_ep->next_frame;
-
-		sts.b_iso_in.framenum = frmnumber;
-		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-		sts.b_iso_in.l = 0;
-
-		/** Buffer 0 descriptors setup */
-		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-		{
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-			dma_desc ++;
-
-			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
-			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-			sts.b_iso_in.framenum += dwc_ep->bInterval;
-		}
-
-		sts.b_iso_in.ioc = 1;
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-		++dma_desc;
-
-		/** Buffer 1 descriptors setup */
-		sts.b_iso_in.ioc = 0;
-		dma_ad = dwc_ep->dma_addr1;
-
-		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-		{
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-			dma_desc ++;
-
-			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
-			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-			sts.b_iso_in.framenum += dwc_ep->bInterval;
-
-			sts.b_iso_in.ioc = 0;
-		}
-		sts.b_iso_in.ioc = 1;
-		sts.b_iso_in.l = 1;
-
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-
-		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
-
-		/** Write dma_ad into diepdma register */
-		dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-	}
-	/** Enable endpoint, clear nak  */
-	depctl.d32 = 0;
-	depctl.b.epena = 1;
-	depctl.b.usbactep = 1;
-	depctl.b.cnak = 1;
-
-	dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-	depctl.d32 = dwc_read_reg32(addr);
-}
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-
-void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t 		depctl = { .d32 = 0 };
-	volatile uint32_t 	*addr;
-
-
-	if(ep->is_in) {
-		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-	} else {
-		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-	}
-
-
-	if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
-		return;
-	} else {
-		deptsiz_data_t		deptsiz = { .d32 = 0 };
-
-		ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
-		ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
-				ep->maxpacket;
-		ep->xfer_count = 0;
-		ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-		ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-
-		if(ep->is_in) {
-			/* Program the transfer size and packet count
-			 *	as follows: xfersize = N * maxpacket +
-			 *	short_packet pktcnt = N + (short_packet
-			 *	exist ? 1 : 0)
-			 */
-			deptsiz.b.mc = ep->pkt_per_frm;
-			deptsiz.b.xfersize = ep->xfer_len;
-			deptsiz.b.pktcnt =
-				(ep->xfer_len - 1 + ep->maxpacket) /
-				ep->maxpacket;
-			dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-
-			/* Write the DMA register */
-			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-
-		} else {
-			deptsiz.b.pktcnt =
-					(ep->xfer_len + (ep->maxpacket - 1)) /
-					ep->maxpacket;
-			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-
-			dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-
-			/* Write the DMA register */
-			dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
-
-		}
-		/** Enable endpoint, clear nak  */
-		depctl.d32 = 0;
-		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-
-		depctl.b.epena = 1;
-		depctl.b.cnak = 1;
-
-		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-	}
-}
-
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer.	 For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- 	if(core_if->dma_enable) {
-		if(core_if->dma_desc_enable) {
-			if(ep->is_in) {
-				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
-			} else {
-				ep->desc_cnt = ep->pkt_cnt;
-			}
-			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
-		} else {
-			if(core_if->pti_enh_enable) {
-				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
-			} else {
-				ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-				ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-			}
-		}
-	} else {
-		ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-		ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-	}
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer.	 For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	depctl_data_t depctl = { .d32 = 0 };
-	volatile uint32_t *addr;
-
-	if(ep->is_in == 1) {
-		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-	}
-	else {
-		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-	}
-
-	/* disable the ep */
-	depctl.d32 = dwc_read_reg32(addr);
-
-	depctl.b.epdis = 1;
-	depctl.b.snak = 1;
-
-	dwc_write_reg32(addr, depctl.d32);
-
-	if(core_if->dma_desc_enable &&
-		ep->iso_desc_addr && ep->iso_dma_desc_addr) {
-		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
-	}
-
-	/* reset varibales */
-	ep->dma_addr0 = 0;
-	ep->dma_addr1 = 0;
-	ep->xfer_buff0 = 0;
-	ep->xfer_buff1 = 0;
-	ep->data_per_frame = 0;
-	ep->data_pattern_frame = 0;
-	ep->sync_frame = 0;
-	ep->buf_proc_intrvl = 0;
-	ep->bInterval = 0;
-	ep->proc_buf_num = 0;
-	ep->pkt_per_frm = 0;
-	ep->pkt_per_frm = 0;
-	ep->desc_cnt = 	0;
-	ep->iso_desc_addr = 0;
-	ep->iso_dma_desc_addr = 0;
-}
-
-
-/**
- * This function is used to submit an ISOC Transfer Request to an EP.
- *
- *	- Every time a sync period completes the request's completion callback
- *	  is called to provide data to the gadget driver.
- *	- Once submitted the request cannot be modified.
- *	- Each request is turned into periodic data packets untill ISO
- *	  Transfer is stopped..
- */
-static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
-				gfp_t gfp_flags)
-{
-	dwc_otg_pcd_ep_t 	*ep;
-	dwc_otg_pcd_t		*pcd;
-	dwc_ep_t 		*dwc_ep;
-	unsigned long 		flags = 0;
-	int32_t 		frm_data;
-	dwc_otg_core_if_t	*core_if;
-	dcfg_data_t		dcfg;
-	dsts_data_t		dsts;
-
-
-	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
-		DWC_WARN("%s, bad params\n", __func__);
-		return -EINVAL;
-	}
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
-	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-		DWC_WARN("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	pcd = ep->pcd;
-	core_if = GET_CORE_IF(pcd);
-
-	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-
-	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-		DWC_WARN("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
-	dwc_ep = &ep->dwc_ep;
-
-	if(ep->iso_req) {
-		DWC_WARN("%s, iso request in progress\n", __func__);
-	}
-	req->status = -EINPROGRESS;
-
-	dwc_ep->dma_addr0 = req->dma0;
-	dwc_ep->dma_addr1 = req->dma1;
-
-	dwc_ep->xfer_buff0 = req->buf0;
-	dwc_ep->xfer_buff1 = req->buf1;
-
-	ep->iso_req = req;
-
-	dwc_ep->data_per_frame = req->data_per_frame;
-
-	/** @todo - pattern data support is to be implemented in the future */
-	dwc_ep->data_pattern_frame = req->data_pattern_frame;
-	dwc_ep->sync_frame = req->sync_frame;
-
-	dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
-
-	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
-
-	dwc_ep->proc_buf_num = 0;
-
-	dwc_ep->pkt_per_frm = 0;
-	frm_data = ep->dwc_ep.data_per_frame;
-	while(frm_data > 0) {
-		dwc_ep->pkt_per_frm++;
-		frm_data -= ep->dwc_ep.maxpacket;
-	}
-
-	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
-	if(req->flags & USB_REQ_ISO_ASAP) {
-		dwc_ep->next_frame = dsts.b.soffn + 1;
-		if(dwc_ep->bInterval != 1){
-			dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
-		}
-	} else {
-		dwc_ep->next_frame = req->start_frame;
-	}
-
-
-	if(!core_if->pti_enh_enable) {
-		dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-	} else {
-		dwc_ep->pkt_cnt =
-			(dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
-			- 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
-	}
-
-	if(core_if->dma_desc_enable) {
-		dwc_ep->desc_cnt =
-			dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-	}
-
-	dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
-	if(!dwc_ep->pkt_info) {
-		return -ENOMEM;
-	}
-	if(core_if->pti_enh_enable) {
-		memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-	}
-
-	dwc_ep->cur_pkt = 0;
-
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
-	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
-
-	return 0;
-}
-
-/**
- * This function stops ISO EP Periodic Data Transfer.
- */
-static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
-{
-	dwc_otg_pcd_ep_t *ep;
-	dwc_otg_pcd_t	*pcd;
-	dwc_ep_t *dwc_ep;
-	unsigned long flags;
-
-	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
-	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-		DWC_WARN("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	pcd = ep->pcd;
-
-	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-		DWC_WARN("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	dwc_ep = &ep->dwc_ep;
-
-	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
-
-	kfree(dwc_ep->pkt_info);
-
-	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
-	if(ep->iso_req != req) {
-		return -EINVAL;
-	}
-
-	req->status = -ECONNRESET;
-
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
-
-	ep->iso_req = 0;
-
-	return 0;
-}
-
-/**
- * This function is used for perodical data exchnage between PCD and gadget drivers.
- * for Isochronous EPs
- *
- *	- Every time a sync period completes this function is called to
- *	  perform data exchange between PCD and gadget
- */
-void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
-{
- 	int i;
-	struct usb_gadget_iso_packet_descriptor *iso_packet;
-	dwc_ep_t *dwc_ep;
-
-	dwc_ep = &ep->dwc_ep;
-
-	if(ep->iso_req->status == -ECONNRESET) {
-		DWC_PRINT("Device has already disconnected\n");
-		/*Device has been disconnected*/
-		return;
-	}
-
-	if(dwc_ep->proc_buf_num != 0) {
-		iso_packet = ep->iso_req->iso_packet_desc0;
-	}
-
-	else {
-		iso_packet = ep->iso_req->iso_packet_desc1;
-	}
-
-	/* Fill in ISOC packets descriptors & pass to gadget driver*/
-
-	for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
-		iso_packet[i].status = dwc_ep->pkt_info[i].status;
-		iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
-		iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
-		dwc_ep->pkt_info[i].status = 0;
-		dwc_ep->pkt_info[i].offset = 0;
-		dwc_ep->pkt_info[i].length = 0;
-	}
-
-	/* Call callback function to process data buffer */
-	ep->iso_req->status = 0;/* success */
-
-	SPIN_UNLOCK(&ep->pcd->lock);
-	ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
-	SPIN_LOCK(&ep->pcd->lock);
-}
-
-
-static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
-				gfp_t gfp_flags)
-{
-	struct usb_iso_request	*pReq = NULL;
-	uint32_t		req_size;
-
-
-	req_size = sizeof(struct usb_iso_request);
-	req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
-
-
-	pReq = kmalloc(req_size, gfp_flags);
-	if (!pReq) {
-		DWC_WARN("%s, can't allocate Iso Request\n", __func__);
-		return 0;
-	}
-	pReq->iso_packet_desc0 = (void*) (pReq +  1);
-
-	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
-
-	return pReq;
-}
-
-static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
-{
-	kfree(req);
-}
-
-static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
-{
-	.ep_ops =
-	{
-		.enable		= dwc_otg_pcd_ep_enable,
-		.disable	= dwc_otg_pcd_ep_disable,
-
-		.alloc_request	= dwc_otg_pcd_alloc_request,
-		.free_request	= dwc_otg_pcd_free_request,
-
-		//.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
-		//.free_buffer	= dwc_otg_pcd_free_buffer,
-
-		.queue		= dwc_otg_pcd_ep_queue,
-		.dequeue	= dwc_otg_pcd_ep_dequeue,
-
-		.set_halt	= dwc_otg_pcd_ep_set_halt,
-		.fifo_status	= 0,
-		.fifo_flush = 0,
-	},
-	.iso_ep_start		= dwc_otg_pcd_iso_ep_start,
-	.iso_ep_stop		= dwc_otg_pcd_iso_ep_stop,
-	.alloc_iso_request 	= dwc_otg_pcd_alloc_iso_request,
-	.free_iso_request	= dwc_otg_pcd_free_iso_request,
-};
-
-#else
-
-
-static struct usb_ep_ops dwc_otg_pcd_ep_ops =
-{
-	.enable		= dwc_otg_pcd_ep_enable,
-	.disable	= dwc_otg_pcd_ep_disable,
-
-	.alloc_request	= dwc_otg_pcd_alloc_request,
-	.free_request	= dwc_otg_pcd_free_request,
-
-//	.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
-//	.free_buffer	= dwc_otg_pcd_free_buffer,
-
-	.queue		= dwc_otg_pcd_ep_queue,
-	.dequeue	= dwc_otg_pcd_ep_dequeue,
-
-	.set_halt	= dwc_otg_pcd_ep_set_halt,
-	.fifo_status	= 0,
-	.fifo_flush = 0,
-
-
-};
-
-#endif /* DWC_EN_ISOC */
-/*	Gadget Operations */
-/**
- * The following gadget operations will be implemented in the DWC_otg
- * PCD. Functions in the API that are not described below are not
- * implemented.
- *
- * The Gadget API provides wrapper functions for each of the function
- * pointers defined in usb_gadget_ops. The Gadget Driver calls the
- * wrapper function, which then calls the underlying PCD function. The
- * following sections are named according to the wrapper functions
- * (except for ioctl, which doesn't have a wrapper function). Within
- * each section, the corresponding DWC_otg PCD function name is
- * specified.
- *
- */
-
-/**
- *Gets the USB Frame number of the last SOF.
- */
-static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
-{
-	dwc_otg_pcd_t *pcd;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-
-	if (gadget == 0) {
-		return -ENODEV;
-	}
-	else {
-		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-		dwc_otg_get_frame_number(GET_CORE_IF(pcd));
-	}
-
-	return 0;
-}
-
-void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
-{
-	uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
-	gotgctl_data_t mem;
-	gotgctl_data_t val;
-
-	val.d32 = dwc_read_reg32(addr);
-	if (val.b.sesreq) {
-		DWC_ERROR("Session Request Already active!\n");
-			return;
-	}
-
-	DWC_NOTICE("Session Request Initated\n");
-	mem.d32 = dwc_read_reg32(addr);
-	mem.b.sesreq = 1;
-	dwc_write_reg32(addr, mem.d32);
-
-	/* Start the SRP timer */
-	dwc_otg_pcd_start_srp_timer(pcd);
-	return;
-}
-
-void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
-{
-	dctl_data_t dctl = {.d32=0};
-	volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
-
-	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-		if (pcd->remote_wakeup_enable) {
-			if (set) {
-				dctl.b.rmtwkupsig = 1;
-				dwc_modify_reg32(addr, 0, dctl.d32);
-				DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
-				mdelay(1);
-				dwc_modify_reg32(addr, dctl.d32, 0);
-				DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
-			}
-			else {
-			}
-		}
-		else {
-			DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
-		}
-	}
-	return;
-}
-
-/**
- * Initiates Session Request Protocol (SRP) to wakeup the host if no
- * session is in progress. If a session is already in progress, but
- * the device is suspended, remote wakeup signaling is started.
- *
- */
-static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
-{
-	unsigned long flags;
-	dwc_otg_pcd_t *pcd;
-	dsts_data_t		dsts;
-	gotgctl_data_t	gotgctl;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-
-	if (gadget == 0) {
-		return -ENODEV;
-	}
-	else {
-		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-	}
-	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
-	/*
-	 * This function starts the Protocol if no session is in progress. If
-	 * a session is already in progress, but the device is suspended,
-	 * remote wakeup signaling is started.
-	 */
-
-	/* Check if valid session */
-	gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
-	if (gotgctl.b.bsesvld) {
-		/* Check if suspend state */
-		dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
-		if (dsts.b.suspsts) {
-			dwc_otg_pcd_remote_wakeup(pcd, 1);
-		}
-	}
-	else {
-		dwc_otg_pcd_initiate_srp(pcd);
-	}
-
-	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-	return 0;
-}
-
-static const struct usb_gadget_ops dwc_otg_pcd_ops =
-{
-	.get_frame	 = dwc_otg_pcd_get_frame,
-	.wakeup		 = dwc_otg_pcd_wakeup,
-	// current versions must always be self-powered
-};
-
-/**
- * This function updates the otg values in the gadget structure.
- */
-void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
-{
-
-	if (!pcd->gadget.is_otg)
-		return;
-
-	if (reset) {
-		pcd->b_hnp_enable = 0;
-		pcd->a_hnp_support = 0;
-		pcd->a_alt_hnp_support = 0;
-	}
-
-	pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
-	pcd->gadget.a_hnp_support =  pcd->a_hnp_support;
-	pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
-}
-
-/**
- * This function is the top level PCD interrupt handler.
- */
-static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
-{
-	dwc_otg_pcd_t *pcd = dev;
-	int32_t retval = IRQ_NONE;
-
-	retval = dwc_otg_pcd_handle_intr(pcd);
-	return IRQ_RETVAL(retval);
-}
-
-/**
- * PCD Callback function for initializing the PCD when switching to
- * device mode.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_start_cb(void *p)
-{
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
-	/*
-	 * Initialized the Core for Device mode.
-	 */
-	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-		dwc_otg_core_dev_init(GET_CORE_IF(pcd));
-	}
-	return 1;
-}
-
-/**
- * PCD Callback function for stopping the PCD when switching to Host
- * mode.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_stop_cb(void *p)
-{
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
-
-	dwc_otg_pcd_stop(pcd);
-	return 1;
-}
-
-
-/**
- * PCD Callback function for notifying the PCD when resuming from
- * suspend.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_suspend_cb(void *p)
-{
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
-	if (pcd->driver && pcd->driver->resume) {
-		SPIN_UNLOCK(&pcd->lock);
-		pcd->driver->suspend(&pcd->gadget);
-		SPIN_LOCK(&pcd->lock);
-	}
-
-	return 1;
-}
-
-
-/**
- * PCD Callback function for notifying the PCD when resuming from
- * suspend.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_resume_cb(void *p)
-{
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
-	if (pcd->driver && pcd->driver->resume) {
-			SPIN_UNLOCK(&pcd->lock);
-			pcd->driver->resume(&pcd->gadget);
-			SPIN_LOCK(&pcd->lock);
-	}
-
-	/* Stop the SRP timeout timer. */
-	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
-		(!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
-		if (GET_CORE_IF(pcd)->srp_timer_started) {
-			GET_CORE_IF(pcd)->srp_timer_started = 0;
-			del_timer(&pcd->srp_timer);
-		}
-	}
-	return 1;
-}
-
-
-/**
- * PCD Callback structure for handling mode switching.
- */
-static dwc_otg_cil_callbacks_t pcd_callbacks =
-{
-	.start = dwc_otg_pcd_start_cb,
-	.stop = dwc_otg_pcd_stop_cb,
-	.suspend = dwc_otg_pcd_suspend_cb,
-	.resume_wakeup = dwc_otg_pcd_resume_cb,
-	.p = 0, /* Set at registration */
-};
-
-/**
- * This function is called when the SRP timer expires.	The SRP should
- * complete within 6 seconds.
- */
-static void srp_timeout(unsigned long ptr)
-{
-	gotgctl_data_t gotgctl;
-	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
-	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
-
-	gotgctl.d32 = dwc_read_reg32(addr);
-
-	core_if->srp_timer_started = 0;
-
-	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-		(core_if->core_params->i2c_enable)) {
-		DWC_PRINT("SRP Timeout\n");
-
-		if ((core_if->srp_success) &&
-			(gotgctl.b.bsesvld)) {
-			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-			}
-
-			/* Clear Session Request */
-			gotgctl.d32 = 0;
-			gotgctl.b.sesreq = 1;
-			dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-					  gotgctl.d32, 0);
-
-			core_if->srp_success = 0;
-		}
-		else {
-			DWC_ERROR("Device not connected/responding\n");
-			gotgctl.b.sesreq = 0;
-			dwc_write_reg32(addr, gotgctl.d32);
-		}
-	}
-	else if (gotgctl.b.sesreq) {
-		DWC_PRINT("SRP Timeout\n");
-
-		DWC_ERROR("Device not connected/responding\n");
-		gotgctl.b.sesreq = 0;
-		dwc_write_reg32(addr, gotgctl.d32);
-	}
-	else {
-		DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
-	}
-}
-
-/**
- * Start the SRP timer to detect when the SRP does not complete within
- * 6 seconds.
- *
- * @param pcd the pcd structure.
- */
-void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
-{
-	struct timer_list *srp_timer = &pcd->srp_timer;
-	GET_CORE_IF(pcd)->srp_timer_started = 1;
-	init_timer(srp_timer);
-	srp_timer->function = srp_timeout;
-	srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
-	srp_timer->expires = jiffies + (HZ*6);
-	add_timer(srp_timer);
-}
-
-/**
- * Tasklet
- *
- */
-extern void start_next_request(dwc_otg_pcd_ep_t *ep);
-
-static void start_xfer_tasklet_func (unsigned long data)
-{
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
-	dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
-
-	int i;
-	depctl_data_t diepctl;
-
-	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
-
-	diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
-
-	if (pcd->ep0.queue_sof) {
-		pcd->ep0.queue_sof = 0;
-		start_next_request (&pcd->ep0);
-		// break;
-	}
-
-	for (i=0; i<core_if->dev_if->num_in_eps; i++)
-	{
-		depctl_data_t diepctl;
-		diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-
-		if (pcd->in_ep[i].queue_sof) {
-			pcd->in_ep[i].queue_sof = 0;
-			start_next_request (&pcd->in_ep[i]);
-			// break;
-		}
-	}
-
-	return;
-}
-
-
-
-
-
-
-
-static struct tasklet_struct start_xfer_tasklet = {
-	.next = NULL,
-	.state = 0,
-	.count = ATOMIC_INIT(0),
-	.func = start_xfer_tasklet_func,
-	.data = 0,
-};
-/**
- * This function initialized the pcd Dp structures to there default
- * state.
- *
- * @param pcd the pcd structure.
- */
-void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
-{
-	static const char * names[] =
-		{
-
-			"ep0",
-			"ep1in",
-			"ep2in",
-			"ep3in",
-			"ep4in",
-			"ep5in",
-			"ep6in",
-			"ep7in",
-			"ep8in",
-			"ep9in",
-			"ep10in",
-			"ep11in",
-			"ep12in",
-			"ep13in",
-			"ep14in",
-			"ep15in",
-			"ep1out",
-			"ep2out",
-			"ep3out",
-			"ep4out",
-			"ep5out",
-			"ep6out",
-			"ep7out",
-			"ep8out",
-			"ep9out",
-			"ep10out",
-			"ep11out",
-			"ep12out",
-			"ep13out",
-			"ep14out",
-			"ep15out"
-
-	};
-
-	int i;
-	int in_ep_cntr, out_ep_cntr;
-	uint32_t hwcfg1;
-	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
-	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
-	dwc_otg_pcd_ep_t *ep;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-
-	INIT_LIST_HEAD (&pcd->gadget.ep_list);
-	pcd->gadget.ep0 = &pcd->ep0.ep;
-	pcd->gadget.speed = USB_SPEED_UNKNOWN;
-
-	INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
-
-	/**
-	 * Initialize the EP0 structure.
-	 */
-	ep = &pcd->ep0;
-
-	/* Init EP structure */
-	ep->desc = 0;
-	ep->pcd = pcd;
-	ep->stopped = 1;
-
-	/* Init DWC ep structure */
-	ep->dwc_ep.num = 0;
-	ep->dwc_ep.active = 0;
-	ep->dwc_ep.tx_fifo_num = 0;
-	/* Control until ep is actvated */
-	ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-	ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-	ep->dwc_ep.dma_addr = 0;
-	ep->dwc_ep.start_xfer_buff = 0;
-	ep->dwc_ep.xfer_buff = 0;
-	ep->dwc_ep.xfer_len = 0;
-	ep->dwc_ep.xfer_count = 0;
-	ep->dwc_ep.sent_zlp = 0;
-	ep->dwc_ep.total_len = 0;
-	ep->queue_sof = 0;
-	ep->dwc_ep.desc_addr = 0;
-	ep->dwc_ep.dma_desc_addr = 0;
-
-	ep->dwc_ep.aligned_buf=NULL;
-	ep->dwc_ep.aligned_buf_size=0;
-	ep->dwc_ep.aligned_dma_addr=0;
-
-
-	/* Init the usb_ep structure. */
-	ep->ep.name = names[0];
-	ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-
-	/**
-	 * @todo NGS: What should the max packet size be set to
-	 * here?  Before EP type is set?
-	 */
-	ep->ep.maxpacket = MAX_PACKET_SIZE;
-
-	list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
-	INIT_LIST_HEAD (&ep->queue);
-	/**
-	 * Initialize the EP structures.
-	 */
-	in_ep_cntr = 0;
-	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
-
-	for (i = 1; in_ep_cntr < num_in_eps; i++)
-	{
-		if((hwcfg1 & 0x1) == 0) {
-			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
-			in_ep_cntr ++;
-
-			/* Init EP structure */
-			ep->desc = 0;
-			ep->pcd = pcd;
-			ep->stopped = 1;
-
-			/* Init DWC ep structure */
-			ep->dwc_ep.is_in = 1;
-			ep->dwc_ep.num = i;
-			ep->dwc_ep.active = 0;
-			ep->dwc_ep.tx_fifo_num = 0;
-
-			/* Control until ep is actvated */
-			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-			ep->dwc_ep.dma_addr = 0;
-			ep->dwc_ep.start_xfer_buff = 0;
-			ep->dwc_ep.xfer_buff = 0;
-			ep->dwc_ep.xfer_len = 0;
-			ep->dwc_ep.xfer_count = 0;
-			ep->dwc_ep.sent_zlp = 0;
-			ep->dwc_ep.total_len = 0;
-			ep->queue_sof = 0;
-			ep->dwc_ep.desc_addr = 0;
-			ep->dwc_ep.dma_desc_addr = 0;
-
-			/* Init the usb_ep structure. */
-			ep->ep.name = names[i];
-			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-
-			/**
-			 * @todo NGS: What should the max packet size be set to
-			 * here?  Before EP type is set?
-			 */
-			ep->ep.maxpacket = MAX_PACKET_SIZE;
-
-			//add only even number ep as in
-			if((i%2)==1)
-				list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
-			INIT_LIST_HEAD (&ep->queue);
-		}
-		hwcfg1 >>= 2;
-	}
-
-	out_ep_cntr = 0;
-	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
-
-	for (i = 1; out_ep_cntr < num_out_eps; i++)
-	{
-		if((hwcfg1 & 0x1) == 0) {
-			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
-			out_ep_cntr++;
-
-			/* Init EP structure */
-			ep->desc = 0;
-			ep->pcd = pcd;
-			ep->stopped = 1;
-
-			/* Init DWC ep structure */
-			ep->dwc_ep.is_in = 0;
-			ep->dwc_ep.num = i;
-			ep->dwc_ep.active = 0;
-			ep->dwc_ep.tx_fifo_num = 0;
-			/* Control until ep is actvated */
-			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-			ep->dwc_ep.dma_addr = 0;
-			ep->dwc_ep.start_xfer_buff = 0;
-			ep->dwc_ep.xfer_buff = 0;
-			ep->dwc_ep.xfer_len = 0;
-			ep->dwc_ep.xfer_count = 0;
-			ep->dwc_ep.sent_zlp = 0;
-			ep->dwc_ep.total_len = 0;
-			ep->queue_sof = 0;
-
-			/* Init the usb_ep structure. */
-			ep->ep.name = names[15 + i];
-			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-			/**
-			 * @todo NGS: What should the max packet size be set to
-			 * here?  Before EP type is set?
-			 */
-			ep->ep.maxpacket = MAX_PACKET_SIZE;
-
-			//add only odd number ep as out
-			if((i%2)==0)
-				list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
-			INIT_LIST_HEAD (&ep->queue);
-		}
-		hwcfg1 >>= 2;
-	}
-
-	/* remove ep0 from the list.  There is a ep0 pointer.*/
-	list_del_init (&pcd->ep0.ep.ep_list);
-
-	pcd->ep0state = EP0_DISCONNECT;
-	pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
-	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
-	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-}
-
-/**
- * This function releases the Gadget device.
- * required by device_unregister().
- *
- * @todo Should this do something?	Should it free the PCD?
- */
-static void dwc_otg_pcd_gadget_release(struct device *dev)
-{
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
-}
-
-
-
-/**
- * This function initialized the PCD portion of the driver.
- *
- */
-u8 dev_id[]="gadget";
-int dwc_otg_pcd_init(struct platform_device *pdev)
-{
-	static char pcd_name[] = "dwc_otg_pcd";
-	dwc_otg_pcd_t *pcd;
-	dwc_otg_core_if_t* core_if;
-	dwc_otg_dev_if_t* dev_if;
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-	int retval = 0;
-
-
-	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, pdev);
-	/*
-	 * Allocate PCD structure
-	 */
-	pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
-
-	if (pcd == 0) {
-		return -ENOMEM;
-	}
-
-	memset(pcd, 0, sizeof(dwc_otg_pcd_t));
-	spin_lock_init(&pcd->lock);
-
-	otg_dev->pcd = pcd;
-	s_pcd = pcd;
-	pcd->gadget.name = pcd_name;
-
-	pcd->gadget.dev.init_name = dev_id;
-	pcd->otg_dev = platform_get_drvdata(pdev);
-
-	pcd->gadget.dev.parent = &pdev->dev;
-	pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
-	pcd->gadget.ops = &dwc_otg_pcd_ops;
-
-	core_if = GET_CORE_IF(pcd);
-	dev_if = core_if->dev_if;
-
-	if(core_if->hwcfg4.b.ded_fifo_en) {
-		DWC_PRINT("Dedicated Tx FIFOs mode\n");
-	}
-	else {
-		DWC_PRINT("Shared Tx FIFO mode\n");
-	}
-
-	/* If the module is set to FS or if the PHY_TYPE is FS then the gadget
-	 * should not report as dual-speed capable.	 replace the following line
-	 * with the block of code below it once the software is debugged for
-	 * this.  If is_dualspeed = 0 then the gadget driver should not report
-	 * a device qualifier descriptor when queried. */
-	if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
-		((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
-		 (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
-		 (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
-		pcd->gadget.max_speed = USB_SPEED_FULL;
-	}
-	else {
-		pcd->gadget.max_speed = USB_SPEED_HIGH;
-	}
-
-	if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
-	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
-	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-		pcd->gadget.is_otg = 0;
-	}
-	else {
-		pcd->gadget.is_otg = 1;
-	}
-
-
-	pcd->driver = 0;
-	/* Register the gadget device */
-printk("%s: 1\n",__func__);
-	retval = device_register(&pcd->gadget.dev);
-	if (retval != 0) {
-		kfree (pcd);
-printk("%s: 2\n",__func__);
-		return retval;
-	}
-
-
-	/*
-	 * Initialized the Core for Device mode.
-	 */
-	if (dwc_otg_is_device_mode(core_if)) {
-		dwc_otg_core_dev_init(core_if);
-	}
-
-	/*
-	 * Initialize EP structures
-	 */
-	dwc_otg_pcd_reinit(pcd);
-
-	/*
-	 * Register the PCD Callbacks.
-	 */
-	dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
-						pcd);
-	/*
-	 * Setup interupt handler
-	 */
-	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
-	retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
-				IRQF_SHARED, pcd->gadget.name, pcd);
-	if (retval != 0) {
-		DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
-		device_unregister(&pcd->gadget.dev);
-		kfree (pcd);
-		return -EBUSY;
-	}
-
-	/*
-	 * Initialize the DMA buffer for SETUP packets
-	 */
-	if (GET_CORE_IF(pcd)->dma_enable) {
-		pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
-		if (pcd->setup_pkt == 0) {
-			free_irq(otg_dev->irq, pcd);
-			device_unregister(&pcd->gadget.dev);
-			kfree (pcd);
-			return -ENOMEM;
-		}
-
-		pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
-		if (pcd->status_buf == 0) {
-			dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-			free_irq(otg_dev->irq, pcd);
-			device_unregister(&pcd->gadget.dev);
-			kfree (pcd);
-			return -ENOMEM;
-		}
-
-		if (GET_CORE_IF(pcd)->dma_desc_enable) {
-			dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
-			dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
-			dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
-			dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
-
-			if(dev_if->setup_desc_addr[0] == 0
-			|| dev_if->setup_desc_addr[1] == 0
-			|| dev_if->in_desc_addr == 0
-			|| dev_if->out_desc_addr == 0 ) {
-
-				if(dev_if->out_desc_addr)
-					dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-				if(dev_if->in_desc_addr)
-					dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-				if(dev_if->setup_desc_addr[1])
-					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-				if(dev_if->setup_desc_addr[0])
-					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-
-
-				dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
-				dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-
-				free_irq(otg_dev->irq, pcd);
-				device_unregister(&pcd->gadget.dev);
-				kfree (pcd);
-
-				return -ENOMEM;
-			}
-		}
-	}
-	else {
-		pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
-		if (pcd->setup_pkt == 0) {
-			free_irq(otg_dev->irq, pcd);
-			device_unregister(&pcd->gadget.dev);
-			kfree (pcd);
-			return -ENOMEM;
-		}
-
-		pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
-		if (pcd->status_buf == 0) {
-			kfree(pcd->setup_pkt);
-			free_irq(otg_dev->irq, pcd);
-			device_unregister(&pcd->gadget.dev);
-			kfree (pcd);
-			return -ENOMEM;
-		}
-	}
-
-
-	/* Initialize tasklet */
-	start_xfer_tasklet.data = (unsigned long)pcd;
-	pcd->start_xfer_tasklet = &start_xfer_tasklet;
-
-	return 0;
-}
-
-/**
- * Cleanup the PCD.
- */
-void dwc_otg_pcd_remove(struct platform_device *pdev)
-{
-	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-	dwc_otg_pcd_t *pcd = otg_dev->pcd;
-	dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pdev);
-
-	/*
-	 * Free the IRQ
-	 */
-	free_irq(otg_dev->irq, pcd);
-
-	 /* start with the driver above us */
-	if (pcd->driver) {
-		/* should have been done already by driver model core */
-		DWC_WARN("driver '%s' is still registered\n",
-				 pcd->driver->driver.name);
-		usb_gadget_unregister_driver(pcd->driver);
-	}
-	device_unregister(&pcd->gadget.dev);
-
-	if (GET_CORE_IF(pcd)->dma_enable) {
-		dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-		dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
-		if (GET_CORE_IF(pcd)->dma_desc_enable) {
-			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-		}
-	}
-	else {
-		kfree (pcd->setup_pkt);
-		kfree (pcd->status_buf);
-	}
-
-	kfree(pcd);
-	otg_dev->pcd = 0;
-}
-
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.h
deleted file mode 100644
index e75437c..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
- * $Revision: #36 $
- * $Date: 2008/09/26 $
- * $Change: 1103515 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-#if !defined(__DWC_PCD_H__)
-#define __DWC_PCD_H__
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-struct dwc_otg_device;
-
-#include "otg_cil.h"
-
-/**
- * @file
- *
- * This file contains the structures, constants, and interfaces for
- * the Perpherial Contoller Driver (PCD).
- *
- * The Peripheral Controller Driver (PCD) for Linux will implement the
- * Gadget API, so that the existing Gadget drivers can be used.	 For
- * the Mass Storage Function driver the File-backed USB Storage Gadget
- * (FBS) driver will be used.  The FBS driver supports the
- * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
- * transports.
- *
- */
-
-/** Invalid DMA Address */
-#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
-/** Maxpacket size for EP0 */
-#define MAX_EP0_SIZE	64
-/** Maxpacket size for any EP */
-#define MAX_PACKET_SIZE 1024
-
-/** Max Transfer size for any EP */
-#define MAX_TRANSFER_SIZE 65535
-
-/** Max DMA Descriptor count for any EP */
-#define MAX_DMA_DESC_CNT 64
-
-/**
- * Get the pointer to the core_if from the pcd pointer.
- */
-#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
-
-/**
- * States of EP0.
- */
-typedef enum ep0_state
-{
-	EP0_DISCONNECT,		/* no host */
-	EP0_IDLE,
-	EP0_IN_DATA_PHASE,
-	EP0_OUT_DATA_PHASE,
-	EP0_IN_STATUS_PHASE,
-	EP0_OUT_STATUS_PHASE,
-	EP0_STALL,
-} ep0state_e;
-
-/** Fordward declaration.*/
-struct dwc_otg_pcd;
-
-/** DWC_otg iso request structure.
- *
- */
-typedef struct usb_iso_request  dwc_otg_pcd_iso_request_t;
-
-/**	  PCD EP structure.
- * This structure describes an EP, there is an array of EPs in the PCD
- * structure.
- */
-typedef struct dwc_otg_pcd_ep
-{
-	/** USB EP data */
-	struct usb_ep		ep;
-	/** USB EP Descriptor */
-	const struct usb_endpoint_descriptor	*desc;
-
-	/** queue of dwc_otg_pcd_requests. */
-	struct list_head	queue;
-	unsigned stopped : 1;
-	unsigned disabling : 1;
-	unsigned dma : 1;
-	unsigned queue_sof : 1;
-
-#ifdef DWC_EN_ISOC
-	/** DWC_otg Isochronous Transfer */
-	struct usb_iso_request* iso_req;
-#endif //DWC_EN_ISOC
-
-	/** DWC_otg ep data. */
-	dwc_ep_t dwc_ep;
-
-	/** Pointer to PCD */
-	struct dwc_otg_pcd *pcd;
-}dwc_otg_pcd_ep_t;
-
-
-
-/** DWC_otg PCD Structure.
- * This structure encapsulates the data for the dwc_otg PCD.
- */
-typedef struct dwc_otg_pcd
-{
-	/** USB gadget */
-	struct usb_gadget gadget;
-	/** USB gadget driver pointer*/
-	struct usb_gadget_driver *driver;
-	/** The DWC otg device pointer. */
-	struct dwc_otg_device *otg_dev;
-
-	/** State of EP0 */
-	ep0state_e	ep0state;
-	/** EP0 Request is pending */
-	unsigned	ep0_pending : 1;
-	/** Indicates when SET CONFIGURATION Request is in process */
-	unsigned	request_config : 1;
-	/** The state of the Remote Wakeup Enable. */
-	unsigned	remote_wakeup_enable : 1;
-	/** The state of the B-Device HNP Enable. */
-	unsigned	b_hnp_enable : 1;
-	/** The state of A-Device HNP Support. */
-	unsigned	a_hnp_support : 1;
-	/** The state of the A-Device Alt HNP support. */
-	unsigned	a_alt_hnp_support : 1;
-	/** Count of pending Requests */
-	unsigned	request_pending;
-
-		/** SETUP packet for EP0
-	 * This structure is allocated as a DMA buffer on PCD initialization
-	 * with enough space for up to 3 setup packets.
-	 */
-	union
-	{
-			struct usb_ctrlrequest	req;
-			uint32_t	d32[2];
-	} *setup_pkt;
-
-	dma_addr_t setup_pkt_dma_handle;
-
-	/** 2-byte dma buffer used to return status from GET_STATUS */
-	uint16_t *status_buf;
-	dma_addr_t status_buf_dma_handle;
-
-	/** EP0 */
-	dwc_otg_pcd_ep_t ep0;
-
-	/** Array of IN EPs. */
-	dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
-	/** Array of OUT EPs. */
-	dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
-	/** number of valid EPs in the above array. */
-//	  unsigned	num_eps : 4;
-	spinlock_t	lock;
-	/** Timer for SRP.	If it expires before SRP is successful
-	 * clear the SRP. */
-	struct timer_list srp_timer;
-
-	/** Tasklet to defer starting of TEST mode transmissions until
-	 *	Status Phase has been completed.
-	 */
-	struct tasklet_struct test_mode_tasklet;
-
-	/** Tasklet to delay starting of xfer in DMA mode */
-	struct tasklet_struct *start_xfer_tasklet;
-
-	/** The test mode to enter when the tasklet is executed. */
-	unsigned test_mode;
-
-} dwc_otg_pcd_t;
-
-
-/** DWC_otg request structure.
- * This structure is a list of requests.
- */
-typedef struct
-{
-	struct usb_request	req; /**< USB Request. */
-	struct list_head	queue;	/**< queue of these requests. */
-} dwc_otg_pcd_request_t;
-
-
-extern int dwc_otg_pcd_init(struct platform_device *pdev);
-
-//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
-extern void dwc_otg_pcd_remove( struct platform_device *pdev );
-extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
-extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
-
-extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
-extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
-
-extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
-extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
-				int status);
-extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
-extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
-					const unsigned reset);
-#ifndef VERBOSE
-#define VERIFY_PCD_DMA_ADDR(_addr_) 	BUG_ON(((_addr_)==DMA_ADDR_INVALID)||\
-				       ((_addr_)==0)||\
-				       ((_addr_)&0x3))
-#else
-#define VERIFY_PCD_DMA_ADDR(_addr_) 	{\
-						if(((_addr_)==DMA_ADDR_INVALID)||\
-						       ((_addr_)==0)||\
-						       ((_addr_)&0x3)) {\
-							printk("%s: Invalid DMA address "#_addr_"(%.8x)\n",__func__,_addr_);\
-							BUG();\
-						}\
-					}
-#endif
-
-
-static inline void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
-//void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
-	dwc_ep_t *dwc_ep=&ep->dwc_ep;
-
-DWC_DEBUGPL(DBG_PCDV,"%s: dwc_ep xfer_buf=%.8x, total_len=%d, dma_addr=%.8x\n",__func__,(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->dma_addr);
-	if (/*(core_if->dma_enable)&&*/(dwc_ep->dma_addr==DMA_ADDR_INVALID)) {
-		if((((u32)dwc_ep->xfer_buff)&0x3)==0){
-			dwc_ep->dma_addr=dma_map_single(NULL,(void *)(dwc_ep->start_xfer_buff),(dwc_ep->total_len), DMA_TO_DEVICE);
-DWC_DEBUGPL(DBG_PCDV,"    got dma_addr=%.8x\n",dwc_ep->dma_addr);
-		}else{
-DWC_DEBUGPL(DBG_PCDV,"    buf not aligned, use aligned_buf instead. xfer_buf=%.8x, total_len=%d, aligned_buf_size=%d\n",(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->aligned_buf_size);
-			if(dwc_ep->aligned_buf_size<dwc_ep->total_len){
-				if(dwc_ep->aligned_buf){
-//printk("    free buff dwc_ep aligned_buf_size=%d, aligned_buf(%.8x), aligned_dma_addr(%.8x));\n",dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
-					//dma_free_coherent(NULL,dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
-					kfree(dwc_ep->aligned_buf);
-				}
-				dwc_ep->aligned_buf_size=((1<<20)>(dwc_ep->total_len<<1))?(dwc_ep->total_len<<1):(1<<20);
-				//dwc_ep->aligned_buf = dma_alloc_coherent (NULL, dwc_ep->aligned_buf_size, &dwc_ep->aligned_dma_addr, GFP_KERNEL|GFP_DMA);
-				dwc_ep->aligned_buf=kmalloc(dwc_ep->aligned_buf_size,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
-				dwc_ep->aligned_dma_addr=dma_map_single(NULL,(void *)(dwc_ep->aligned_buf),(dwc_ep->aligned_buf_size),DMA_FROM_DEVICE);
-				if(!dwc_ep->aligned_buf){
-					DWC_ERROR("Cannot alloc required buffer!!\n");
-					BUG();
-				}
-DWC_DEBUGPL(DBG_PCDV,"    dwc_ep allocated aligned buf=%.8x, dma_addr=%.8x, size=%d(0x%x)\n", (u32)dwc_ep->aligned_buf, dwc_ep->aligned_dma_addr, dwc_ep->aligned_buf_size, dwc_ep->aligned_buf_size);
-			}
-			dwc_ep->dma_addr=dwc_ep->aligned_dma_addr;
-			if(dwc_ep->is_in) {
-				memcpy(dwc_ep->aligned_buf,dwc_ep->xfer_buff,dwc_ep->total_len);
-				dma_sync_single_for_device(NULL,dwc_ep->dma_addr,dwc_ep->total_len,DMA_TO_DEVICE);
-			}
-		}
-	}
-}
-
-#endif
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd_intr.c b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd_intr.c
deleted file mode 100644
index f3c7446..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_pcd_intr.c
+++ /dev/null
@@ -1,3682 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
- * $Revision: #83 $
- * $Date: 2008/10/14 $
- * $Change: 1115682 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-#include <linux/pci.h>
-
-#include "otg_driver.h"
-#include "otg_pcd.h"
-
-
-#define DEBUG_EP0
-
-
-/* request functions defined in "dwc_otg_pcd.c" */
-
-/** @file
- * This file contains the implementation of the PCD Interrupt handlers.
- *
- * The PCD handles the device interrupts.  Many conditions can cause a
- * device interrupt. When an interrupt occurs, the device interrupt
- * service routine determines the cause of the interrupt and
- * dispatches handling to the appropriate function. These interrupt
- * handling functions are described below.
- * All interrupt registers are processed from LSB to MSB.
- */
-
-
-/**
- * This function prints the ep0 state for debug purposes.
- */
-static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
-{
-#ifdef DEBUG
-	char str[40];
-
-	switch (pcd->ep0state) {
-	case EP0_DISCONNECT:
-		strcpy(str, "EP0_DISCONNECT");
-		break;
-	case EP0_IDLE:
-		strcpy(str, "EP0_IDLE");
-		break;
-	case EP0_IN_DATA_PHASE:
-		strcpy(str, "EP0_IN_DATA_PHASE");
-		break;
-	case EP0_OUT_DATA_PHASE:
-		strcpy(str, "EP0_OUT_DATA_PHASE");
-		break;
-	case EP0_IN_STATUS_PHASE:
-		strcpy(str,"EP0_IN_STATUS_PHASE");
-		break;
-	case EP0_OUT_STATUS_PHASE:
-		strcpy(str,"EP0_OUT_STATUS_PHASE");
-		break;
-	case EP0_STALL:
-		strcpy(str,"EP0_STALL");
-		break;
-	default:
-		strcpy(str,"EP0_INVALID");
-	}
-
-	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
-#endif
-}
-
-/**
- * This function returns pointer to in ep struct with number ep_num
- */
-static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-{
-	int i;
-	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-	if(ep_num == 0) {
-		return &pcd->ep0;
-	}
-	else {
-		for(i = 0; i < num_in_eps; ++i)
-		{
-			if(pcd->in_ep[i].dwc_ep.num == ep_num)
-				return &pcd->in_ep[i];
-		}
-		return 0;
-	}
-}
-/**
- * This function returns pointer to out ep struct with number ep_num
- */
-static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-{
-	int i;
-	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-	if(ep_num == 0) {
-		return &pcd->ep0;
-	}
-	else {
-		for(i = 0; i < num_out_eps; ++i)
-		{
-			if(pcd->out_ep[i].dwc_ep.num == ep_num)
-				return &pcd->out_ep[i];
-		}
-		return 0;
-	}
-}
-/**
- * This functions gets a pointer to an EP from the wIndex address
- * value of the control request.
- */
-static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
-{
-	dwc_otg_pcd_ep_t	*ep;
-
-	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-		return &pcd->ep0;
-	list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
-	{
-		u8	bEndpointAddress;
-
-		if (!ep->desc)
-			continue;
-
-		bEndpointAddress = ep->desc->bEndpointAddress;
-		if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
-			== (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
-			return ep;
-	}
-	return NULL;
-}
-
-/**
- * This function checks the EP request queue, if the queue is not
- * empty the next request is started.
- */
-void start_next_request(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_otg_pcd_request_t *req = 0;
-	uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-	if (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next,
-			   dwc_otg_pcd_request_t, queue);
-
-		/* Setup and start the Transfer */
-		ep->dwc_ep.dma_addr = req->req.dma;
-		ep->dwc_ep.start_xfer_buff = req->req.buf;
-		ep->dwc_ep.xfer_buff = req->req.buf;
-		ep->dwc_ep.sent_zlp = 0;
-		ep->dwc_ep.total_len = req->req.length;
-		ep->dwc_ep.xfer_len = 0;
-		ep->dwc_ep.xfer_count = 0;
-
-		if(max_transfer > MAX_TRANSFER_SIZE) {
-			ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-		} else {
-			ep->dwc_ep.maxxfer = max_transfer;
-		}
-
-		if(req->req.zero) {
-			if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-					&& (ep->dwc_ep.total_len != 0)) {
-				ep->dwc_ep.sent_zlp = 1;
-			}
-
-		}
-	 	ep_check_and_patch_dma_addr(ep);
-		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-	}
-}
-
-/**
- * This function handles the SOF Interrupts. At this time the SOF
- * Interrupt is disabled.
- */
-int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-
-	gintsts_data_t gintsts;
-
-	DWC_DEBUGPL(DBG_PCD, "SOF\n");
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.sofintr = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-
-/**
- * This function handles the Rx Status Queue Level Interrupt, which
- * indicates that there is a least one packet in the Rx FIFO.  The
- * packets are moved from the FIFO to memory, where they will be
- * processed when the Endpoint Interrupt Register indicates Transfer
- * Complete or SETUP Phase Done.
- *
- * Repeat the following until the Rx Status Queue is empty:
- *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
- *		info
- *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
- *		and exit
- *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
- *		SETUP data to the buffer
- *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
- *		to the destination buffer
- */
-int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-	gintmsk_data_t gintmask = {.d32=0};
-	device_grxsts_data_t status;
-	dwc_otg_pcd_ep_t *ep;
-	gintsts_data_t gintsts;
-#ifdef DEBUG
-	static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
-#endif
-
-	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
-	/* Disable the Rx Status Queue Level interrupt */
-	gintmask.b.rxstsqlvl= 1;
-	dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
-
-	/* Get the Status from the top of the FIFO */
-	status.d32 = dwc_read_reg32(&global_regs->grxstsp);
-
-	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
-					"pktsts:%x Frame:%d(0x%0x)\n",
-					status.b.epnum, status.b.bcnt,
-					dpid_str[status.b.dpid],
-					status.b.pktsts, status.b.fn, status.b.fn);
-	/* Get pointer to EP structure */
-	ep = get_out_ep(pcd, status.b.epnum);
-
-	switch (status.b.pktsts) {
-	case DWC_DSTS_GOUT_NAK:
-		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
-		break;
-	case DWC_STS_DATA_UPDT:
-		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
-		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
-			/** @todo NGS Check for buffer overflow? */
-			dwc_otg_read_packet(core_if,
-						 ep->dwc_ep.xfer_buff,
-						 status.b.bcnt);
-			ep->dwc_ep.xfer_count += status.b.bcnt;
-			ep->dwc_ep.xfer_buff += status.b.bcnt;
-		}
-		break;
-	case DWC_STS_XFER_COMP:
-		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
-		break;
-	case DWC_DSTS_SETUP_COMP:
-#ifdef DEBUG_EP0
-		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
-#endif
-		break;
-case DWC_DSTS_SETUP_UPDT:
-		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
-#ifdef DEBUG_EP0
-		DWC_DEBUGPL(DBG_PCD,
-				"SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
-				pcd->setup_pkt->req.bRequestType,
-				pcd->setup_pkt->req.bRequest,
-				pcd->setup_pkt->req.wValue,
-				pcd->setup_pkt->req.wIndex,
-				pcd->setup_pkt->req.wLength);
-#endif
-		ep->dwc_ep.xfer_count += status.b.bcnt;
-		break;
-	default:
-		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
-				status.b.pktsts);
-		break;
-	}
-
-	/* Enable the Rx Status Queue Level interrupt */
-	dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.rxstsqlvl = 1;
-	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-
-	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
-	return 1;
-}
-/**
- * This function examines the Device IN Token Learning Queue to
- * determine the EP number of the last IN token received.  This
- * implementation is for the Mass Storage device where there are only
- * 2 IN EPs (Control-IN and BULK-IN).
- *
- * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
- * are 8 EP Numbers in each of the other possible DTKNQ Registers.
- *
- * @param core_if Programming view of DWC_otg controller.
- *
- */
-static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
-{
-	dwc_otg_device_global_regs_t *dev_global_regs =
-			core_if->dev_if->dev_global_regs;
-	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
-	/* Number of Token Queue Registers */
-	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
-	dtknq1_data_t dtknqr1;
-	uint32_t in_tkn_epnums[4];
-	int ndx = 0;
-	int i = 0;
-	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
-	int epnum = 0;
-
-	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-
-	/* Read the DTKNQ Registers */
-	for (i = 0; i < DTKNQ_REG_CNT; i++)
-	{
-		in_tkn_epnums[ i ] = dwc_read_reg32(addr);
-		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
-				in_tkn_epnums[i]);
-		if (addr == &dev_global_regs->dvbusdis) {
-			addr = &dev_global_regs->dtknqr3_dthrctl;
-		}
-		else {
-			++addr;
-		}
-	}
-
-	/* Copy the DTKNQR1 data to the bit field. */
-	dtknqr1.d32 = in_tkn_epnums[0];
-	/* Get the EP numbers */
-	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
-	ndx = dtknqr1.b.intknwptr - 1;
-
-	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
-	if (ndx == -1) {
-		/** @todo Find a simpler way to calculate the max
-		 * queue position.*/
-		int cnt = TOKEN_Q_DEPTH;
-		if (TOKEN_Q_DEPTH <= 6) {
-			cnt = TOKEN_Q_DEPTH - 1;
-		}
-		else if (TOKEN_Q_DEPTH <= 14) {
-			cnt = TOKEN_Q_DEPTH - 7;
-		}
-		else if (TOKEN_Q_DEPTH <= 22) {
-			cnt = TOKEN_Q_DEPTH - 15;
-		}
-		else {
-			cnt = TOKEN_Q_DEPTH - 23;
-		}
-		epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
-	}
-	else {
-		if (ndx <= 5) {
-			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
-		}
-		else if (ndx <= 13) {
-			ndx -= 6;
-			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
-		}
-		else if (ndx <= 21) {
-			ndx -= 14;
-			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
-		}
-		else if (ndx <= 29) {
-			ndx -= 22;
-			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
-		}
-	}
-	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
-	return epnum;
-}
-
-/**
- * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
- * The active request is checked for the next packet to be loaded into
- * the non-periodic Tx FIFO.
- */
-int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_core_global_regs_t *global_regs =
-			core_if->core_global_regs;
-	dwc_otg_dev_in_ep_regs_t *ep_regs;
-	gnptxsts_data_t txstatus = {.d32 = 0};
-	gintsts_data_t gintsts;
-
-	int epnum = 0;
-	dwc_otg_pcd_ep_t *ep = 0;
-	uint32_t len = 0;
-	int dwords;
-
-	/* Get the epnum from the IN Token Learning Queue. */
-	epnum = get_ep_of_last_in_token(core_if);
-	ep = get_in_ep(pcd, epnum);
-
-	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-	ep_regs = core_if->dev_if->in_ep_regs[epnum];
-
-	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-	if (len > ep->dwc_ep.maxpacket) {
-		len = ep->dwc_ep.maxpacket;
-	}
-	dwords = (len + 3)/4;
-
-	/* While there is space in the queue and space in the FIFO and
-	* More data to tranfer, Write packets to the Tx FIFO */
-	txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
-
-	while  (txstatus.b.nptxqspcavail > 0 &&
-		txstatus.b.nptxfspcavail > dwords &&
-		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
-		/* Write the FIFO */
-		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-
-		if (len > ep->dwc_ep.maxpacket) {
-			len = ep->dwc_ep.maxpacket;
-		}
-
-		dwords = (len + 3)/4;
-		txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-		DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
-	}
-
-	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
-			dwc_read_reg32(&global_regs->gnptxsts));
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.nptxfempty = 1;
-	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This function is called when dedicated Tx FIFO Empty interrupt occurs.
- * The active request is checked for the next packet to be loaded into
- * apropriate Tx FIFO.
- */
-static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t* dev_if = core_if->dev_if;
-	dwc_otg_dev_in_ep_regs_t *ep_regs;
-	dtxfsts_data_t txstatus = {.d32 = 0};
-	dwc_otg_pcd_ep_t *ep = 0;
-	uint32_t len = 0;
-	int dwords;
-
-	ep = get_in_ep(pcd, epnum);
-
-	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-
-	ep_regs = core_if->dev_if->in_ep_regs[epnum];
-
-	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-
-	if (len > ep->dwc_ep.maxpacket) {
-		len = ep->dwc_ep.maxpacket;
-	}
-
-	dwords = (len + 3)/4;
-
-	/* While there is space in the queue and space in the FIFO and
-	 * More data to tranfer, Write packets to the Tx FIFO */
-	txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
-
-	while  (txstatus.b.txfspcavail > dwords &&
-		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
-		ep->dwc_ep.xfer_len != 0) {
-		/* Write the FIFO */
-		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-
-		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-		if (len > ep->dwc_ep.maxpacket) {
-			len = ep->dwc_ep.maxpacket;
-		}
-
-		dwords = (len + 3)/4;
-		txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
-	}
-
-	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-
-	return 1;
-}
-
-/**
- * This function is called when the Device is disconnected. It stops
- * any active requests and informs the Gadget driver of the
- * disconnect.
- */
-void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
-{
-	int i, num_in_eps, num_out_eps;
-	dwc_otg_pcd_ep_t *ep;
-
-	gintmsk_data_t intr_mask = {.d32 = 0};
-
-	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
-	/* don't disconnect drivers more than once */
-	if (pcd->ep0state == EP0_DISCONNECT) {
-		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
-		return;
-	}
-	pcd->ep0state = EP0_DISCONNECT;
-
-	/* Reset the OTG state. */
-	dwc_otg_pcd_update_otg(pcd, 1);
-
-	/* Disable the NP Tx Fifo Empty Interrupt. */
-	intr_mask.b.nptxfempty = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-					 intr_mask.d32, 0);
-
-	/* Flush the FIFOs */
-	/**@todo NGS Flush Periodic FIFOs */
-	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
-	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
-
-	/* prevent new request submissions, kill any outstanding requests  */
-	ep = &pcd->ep0;
-	dwc_otg_request_nuke(ep);
-	/* prevent new request submissions, kill any outstanding requests  */
-	for (i = 0; i < num_in_eps; i++)
-	{
-		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
-		dwc_otg_request_nuke(ep);
-	}
-	/* prevent new request submissions, kill any outstanding requests  */
-	for (i = 0; i < num_out_eps; i++)
-	{
-		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
-		dwc_otg_request_nuke(ep);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (pcd->driver && pcd->driver->disconnect) {
-		SPIN_UNLOCK(&pcd->lock);
-		pcd->driver->disconnect(&pcd->gadget);
-		SPIN_LOCK(&pcd->lock);
-	}
-}
-
-/**
- * This interrupt indicates that ...
- */
-int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
-{
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	gintsts_data_t gintsts;
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
-	intr_mask.b.i2cintr = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-				intr_mask.d32, 0);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.i2cintr = 1;
-	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-						 gintsts.d32);
-	return 1;
-}
-
-
-/**
- * This interrupt indicates that ...
- */
-int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
-{
-	gintsts_data_t gintsts;
-#if defined(VERBOSE)
-	DWC_PRINT("Early Suspend Detected\n");
-#endif
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.erlysuspend = 1;
-	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-				gintsts.d32);
-	return 1;
-}
-
-/**
- * This function configures EPO to receive SETUP packets.
- *
- * @todo NGS: Update the comments from the HW FS.
- *
- *	-# Program the following fields in the endpoint specific registers
- *	for Control OUT EP 0, in order to receive a setup packet
- *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
- *	  setup packets)
- *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
- *	  to back setup packets)
- *		- In DMA mode, DOEPDMA0 Register with a memory address to
- *		  store any setup packets received
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param pcd	  Programming view of the PCD.
- */
-static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	deptsiz0_data_t doeptsize0 = { .d32 = 0};
-	dwc_otg_dma_desc_t* dma_desc;
-	depctl_data_t doepctl = { .d32 = 0 };
-
-#ifdef VERBOSE
-	DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
-				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-#endif
-
-	doeptsize0.b.supcnt = 3;
-	doeptsize0.b.pktcnt = 1;
-	doeptsize0.b.xfersize = 8*3;
-
-	if (core_if->dma_enable) {
-		if (!core_if->dma_desc_enable) {
-			/** put here as for Hermes mode deptisz register should not be written */
-			dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-			 doeptsize0.d32);
-
-			/** @todo dma needs to handle multiple setup packets (up to 3) */
-			VERIFY_PCD_DMA_ADDR(pcd->setup_pkt_dma_handle);
-
-			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
-			pcd->setup_pkt_dma_handle);
-		} else {
-			dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
-			dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
-
-			/** DMA Descriptor Setup */
-			dma_desc->status.b.bs = BS_HOST_BUSY;
-			dma_desc->status.b.l = 1;
-			dma_desc->status.b.ioc = 1;
-			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
-			dma_desc->buf = pcd->setup_pkt_dma_handle;
-			dma_desc->status.b.bs = BS_HOST_READY;
-
-			/** DOEPDMA0 Register write */
-			VERIFY_PCD_DMA_ADDR(dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
-			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
-		}
-
-	} else {
-		/** put here as for Hermes mode deptisz register should not be written */
-		dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-					 doeptsize0.d32);
-	}
-
-	/** DOEPCTL0 Register write */
-	doepctl.b.epena = 1;
-	doepctl.b.cnak = 1;
-	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-
-#ifdef VERBOSE
-	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-				dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-#endif
-}
-
-/**
- * This interrupt occurs when a USB Reset is detected.	When the USB
- * Reset Interrupt occurs the device state is set to DEFAULT and the
- * EP0 state is set to IDLE.
- *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
- *	-#	Unmask the following interrupt bits
- *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
- *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
- *	- DOEPMSK.SETUP = 1
- *	- DOEPMSK.XferCompl = 1
- *	- DIEPMSK.XferCompl = 1
- *	- DIEPMSK.TimeOut = 1
- *	-# Program the following fields in the endpoint specific registers
- *	for Control OUT EP 0, in order to receive a setup packet
- *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
- *	  setup packets)
- *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
- *	  to back setup packets)
- *		- In DMA mode, DOEPDMA0 Register with a memory address to
- *		  store any setup packets received
- * At this point, all the required initialization, except for enabling
- * the control 0 OUT endpoint is done, for receiving SETUP packets.
- */
-int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	depctl_data_t doepctl = { .d32 = 0};
-
-	daint_data_t daintmsk = { .d32 = 0};
-	doepmsk_data_t doepmsk = { .d32 = 0};
-	diepmsk_data_t diepmsk = { .d32 = 0};
-
-	dcfg_data_t dcfg = { .d32=0 };
-	grstctl_t resetctl = { .d32=0 };
-	dctl_data_t dctl = {.d32=0};
-	int i = 0;
-	gintsts_data_t gintsts;
-
-	DWC_PRINT("USB RESET\n");
-#ifdef DWC_EN_ISOC
-	for(i = 1;i < 16; ++i)
-	{
-		dwc_otg_pcd_ep_t *ep;
-		dwc_ep_t *dwc_ep;
-		ep = get_in_ep(pcd,i);
-		if(ep != 0){
-			dwc_ep = &ep->dwc_ep;
-			dwc_ep->next_frame = 0xffffffff;
-		}
-	}
-#endif /* DWC_EN_ISOC  */
-
-	/* reset the HNP settings */
-	dwc_otg_pcd_update_otg(pcd, 1);
-
-	/* Clear the Remote Wakeup Signalling */
-	dctl.b.rmtwkupsig = 1;
-	dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-					  dctl.d32, 0);
-
-	/* Set NAK for all OUT EPs */
-	doepctl.b.snak = 1;
-	for (i=0; i <= dev_if->num_out_eps; i++)
-	{
-		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
-						 doepctl.d32);
-	}
-
-	/* Flush the NP Tx FIFO */
-	dwc_otg_flush_tx_fifo(core_if, 0x10);
-	/* Flush the Learning Queue */
-	resetctl.b.intknqflsh = 1;
-	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-
-	if(core_if->multiproc_int_enable) {
-		daintmsk.b.inep0 = 1;
-		daintmsk.b.outep0 = 1;
-		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
-
-		doepmsk.b.setup = 1;
-		doepmsk.b.xfercompl = 1;
-		doepmsk.b.ahberr = 1;
-		doepmsk.b.epdisabled = 1;
-
-		if(core_if->dma_desc_enable) {
-			doepmsk.b.stsphsercvd = 1;
-			doepmsk.b.bna = 1;
-		}
-/*
-		doepmsk.b.babble = 1;
-		doepmsk.b.nyet = 1;
-
-		if(core_if->dma_enable) {
-			doepmsk.b.nak = 1;
-		}
-*/
-		dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
-
-		diepmsk.b.xfercompl = 1;
-		diepmsk.b.timeout = 1;
-		diepmsk.b.epdisabled = 1;
-		diepmsk.b.ahberr = 1;
-		diepmsk.b.intknepmis = 1;
-
-		if(core_if->dma_desc_enable) {
-			diepmsk.b.bna = 1;
-		}
-/*
-		if(core_if->dma_enable) {
-			diepmsk.b.nak = 1;
-		}
-*/
-		dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
-	} else{
-		daintmsk.b.inep0 = 1;
-		daintmsk.b.outep0 = 1;
-		dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
-
-		doepmsk.b.setup = 1;
-		doepmsk.b.xfercompl = 1;
-		doepmsk.b.ahberr = 1;
-		doepmsk.b.epdisabled = 1;
-
-		if(core_if->dma_desc_enable) {
-			doepmsk.b.stsphsercvd = 1;
-			doepmsk.b.bna = 1;
-		}
-/*
-		doepmsk.b.babble = 1;
-		doepmsk.b.nyet = 1;
-		doepmsk.b.nak = 1;
-*/
-		dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
-
-		diepmsk.b.xfercompl = 1;
-		diepmsk.b.timeout = 1;
-		diepmsk.b.epdisabled = 1;
-		diepmsk.b.ahberr = 1;
-		diepmsk.b.intknepmis = 1;
-
-		if(core_if->dma_desc_enable) {
-			diepmsk.b.bna = 1;
-		}
-
-//		diepmsk.b.nak = 1;
-
-		dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
-	}
-
-	/* Reset Device Address */
-	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-	dcfg.b.devaddr = 0;
-	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-
-	/* setup EP0 to receive SETUP packets */
-	ep0_out_start(core_if, pcd);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.usbreset = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * Get the device speed from the device status register and convert it
- * to USB speed constant.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static int get_device_speed(dwc_otg_core_if_t *core_if)
-{
-	dsts_data_t dsts;
-	enum usb_device_speed speed = USB_SPEED_UNKNOWN;
-	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
-	switch (dsts.b.enumspd) {
-	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-		speed = USB_SPEED_HIGH;
-		break;
-	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-		speed = USB_SPEED_FULL;
-		break;
-
-	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-		speed = USB_SPEED_LOW;
-		break;
-	}
-
-	return speed;
-}
-
-/**
- * Read the device status register and set the device speed in the
- * data structure.
- * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
- */
-int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-	gintsts_data_t gintsts;
-	gusbcfg_data_t gusbcfg;
-	dwc_otg_core_global_regs_t *global_regs =
-		GET_CORE_IF(pcd)->core_global_regs;
-	uint8_t utmi16b, utmi8b;
-//	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
-	DWC_PRINT("SPEED ENUM\n");
-
-	if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
-		utmi16b = 6;
-		utmi8b = 9;
-	} else {
-		utmi16b = 4;
-		utmi8b = 8;
-	}
-	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
-#ifdef DEBUG_EP0
-	print_ep0_state(pcd);
-#endif
-
-	if (pcd->ep0state == EP0_DISCONNECT) {
-		pcd->ep0state = EP0_IDLE;
-	}
-	else if (pcd->ep0state == EP0_STALL) {
-		pcd->ep0state = EP0_IDLE;
-	}
-
-	pcd->ep0state = EP0_IDLE;
-
-	ep0->stopped = 0;
-
-	pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
-
-	/* Set USB turnaround time based on device speed and PHY interface. */
-	gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-	if (pcd->gadget.speed == USB_SPEED_HIGH) {
-		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
-			/* ULPI interface */
-			gusbcfg.b.usbtrdtim = 9;
-		}
-		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
-			/* UTMI+ interface */
-			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
-				gusbcfg.b.usbtrdtim = utmi8b;
-			}
-			else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
-				gusbcfg.b.usbtrdtim = utmi16b;
-			}
-			else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
-				gusbcfg.b.usbtrdtim = utmi8b;
-			}
-			else {
-				gusbcfg.b.usbtrdtim = utmi16b;
-			}
-		}
-		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
-			/* UTMI+  OR  ULPI interface */
-			if (gusbcfg.b.ulpi_utmi_sel == 1) {
-				/* ULPI interface */
-				gusbcfg.b.usbtrdtim = 9;
-			}
-			else {
-				/* UTMI+ interface */
-				if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
-					gusbcfg.b.usbtrdtim = utmi16b;
-				}
-				else {
-					gusbcfg.b.usbtrdtim = utmi8b;
-				}
-			}
-		}
-	}
-	else {
-		/* Full or low speed */
-		gusbcfg.b.usbtrdtim = 9;
-	}
-	dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.enumdone = 1;
-	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-			 gintsts.d32);
-	return 1;
-}
-
-/**
- * This interrupt indicates that the ISO OUT Packet was dropped due to
- * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
- * read all the data from the Rx FIFO.
- */
-int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
-{
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	gintsts_data_t gintsts;
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-			  "ISOC Out Dropped");
-
-	intr_mask.b.isooutdrop = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-			  intr_mask.d32, 0);
-
-	/* Clear interrupt */
-
-	gintsts.d32 = 0;
-	gintsts.b.isooutdrop = 1;
-	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-			 gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This interrupt indicates the end of the portion of the micro-frame
- * for periodic transactions.  If there is a periodic transaction for
- * the next frame, load the packets into the EP periodic Tx FIFO.
- */
-int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
-{
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	gintsts_data_t gintsts;
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
-
-	intr_mask.b.eopframe = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-					  intr_mask.d32, 0);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.eopframe = 1;
-	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This interrupt indicates that EP of the packet on the top of the
- * non-periodic Tx FIFO does not match EP of the IN Token received.
- *
- * The "Device IN Token Queue" Registers are read to determine the
- * order the IN Tokens have been received.	The non-periodic Tx FIFO
- * is flushed, so it can be reloaded in the order seen in the IN Token
- * Queue.
- */
-int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
-{
-	gintsts_data_t gintsts;
-	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.epmismatch = 1;
-	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This funcion stalls EP0.
- */
-static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
-{
-	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-	struct usb_ctrlrequest	*ctrl = &pcd->setup_pkt->req;
-	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
-			 ctrl->bRequestType, ctrl->bRequest, err_val);
-
-	ep0->dwc_ep.is_in = 1;
-	dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
-	pcd->ep0.stopped = 1;
-	pcd->ep0state = EP0_IDLE;
-	ep0_out_start(GET_CORE_IF(pcd), pcd);
-}
-
-/**
- * This functions delegates the setup command to the gadget driver.
- */
-static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
-					struct usb_ctrlrequest * ctrl)
-{
-	int ret = 0;
-	if (pcd->driver && pcd->driver->setup) {
-		SPIN_UNLOCK(&pcd->lock);
-		ret = pcd->driver->setup(&pcd->gadget, ctrl);
-		SPIN_LOCK(&pcd->lock);
-		if (ret < 0) {
-			ep0_do_stall(pcd, ret);
-		}
-
-		/** @todo This is a g_file_storage gadget driver specific
-		 * workaround: a DELAYED_STATUS result from the fsg_setup
-		 * routine will result in the gadget queueing a EP0 IN status
-		 * phase for a two-stage control transfer.	Exactly the same as
-		 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
-		 * specific request.  Need a generic way to know when the gadget
-		 * driver will queue the status phase.	Can we assume when we
-		 * call the gadget driver setup() function that it will always
-		 * queue and require the following flag?  Need to look into
-		 * this.
-		 */
-
-		if (ret == 256 + 999) {
-			pcd->request_config = 1;
-		}
-	}
-}
-
-/**
- * This function starts the Zero-Length Packet for the IN status phase
- * of a 2 stage control transfer.
- */
-static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-	if (pcd->ep0state == EP0_STALL) {
-		return;
-	}
-
-	pcd->ep0state = EP0_IN_STATUS_PHASE;
-
-	/* Prepare for more SETUP Packets */
-	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
-	ep0->dwc_ep.xfer_len = 0;
-	ep0->dwc_ep.xfer_count = 0;
-	ep0->dwc_ep.is_in = 1;
-	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
-	/* Prepare for more SETUP Packets */
-//	if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
-}
-
-/**
- * This function starts the Zero-Length Packet for the OUT status phase
- * of a 2 stage control transfer.
- */
-static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-	if (pcd->ep0state == EP0_STALL) {
-		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
-		return;
-	}
-	pcd->ep0state = EP0_OUT_STATUS_PHASE;
-
-	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
-	ep0->dwc_ep.xfer_len = 0;
-	ep0->dwc_ep.xfer_count = 0;
-	ep0->dwc_ep.is_in = 0;
-	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
-	/* Prepare for more SETUP Packets */
-	if(GET_CORE_IF(pcd)->dma_enable == 0) {
-			ep0_out_start(GET_CORE_IF(pcd), pcd);
-	}
-}
-
-/**
- * Clear the EP halt (STALL) and if pending requests start the
- * transfer.
- */
-static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
-{
-	if(ep->dwc_ep.stall_clear_flag == 0)
-		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-
-	/* Reactive the EP */
-	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-	if (ep->stopped) {
-		ep->stopped = 0;
-		/* If there is a request in the EP queue start it */
-
-		/** @todo FIXME: this causes an EP mismatch in DMA mode.
-		 * epmismatch not yet implemented. */
-
-		/*
-		 * Above fixme is solved by implmenting a tasklet to call the
-		 * start_next_request(), outside of interrupt context at some
-		 * time after the current time, after a clear-halt setup packet.
-		 * Still need to implement ep mismatch in the future if a gadget
-		 * ever uses more than one endpoint at once
-		 */
-		ep->queue_sof = 1;
-		tasklet_schedule (pcd->start_xfer_tasklet);
-	}
-	/* Start Control Status Phase */
-	do_setup_in_status_phase(pcd);
-}
-
-/**
- * This function is called when the SET_FEATURE TEST_MODE Setup packet
- * is sent from the host.  The Device Control register is written with
- * the Test Mode bits set to the specified Test Mode.  This is done as
- * a tasklet so that the "Status" phase of the control transfer
- * completes before transmitting the TEST packets.
- *
- * @todo This has not been tested since the tasklet struct was put
- * into the PCD struct!
- *
- */
-static void do_test_mode(unsigned long data)
-{
-	dctl_data_t		dctl;
-	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	int test_mode = pcd->test_mode;
-
-
-//	  DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
-
-	dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
-	switch (test_mode) {
-	case 1: // TEST_J
-		dctl.b.tstctl = 1;
-		break;
-
-	case 2: // TEST_K
-		dctl.b.tstctl = 2;
-		break;
-
-	case 3: // TEST_SE0_NAK
-		dctl.b.tstctl = 3;
-		break;
-
-	case 4: // TEST_PACKET
-		dctl.b.tstctl = 4;
-		break;
-
-	case 5: // TEST_FORCE_ENABLE
-		dctl.b.tstctl = 5;
-		break;
-	}
-	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-}
-
-/**
- * This function process the GET_STATUS Setup Commands.
- */
-static inline void do_get_status(dwc_otg_pcd_t *pcd)
-{
-	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
-	dwc_otg_pcd_ep_t	*ep;
-	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
-	uint16_t		*status = pcd->status_buf;
-
-#ifdef DEBUG_EP0
-	DWC_DEBUGPL(DBG_PCD,
-			"GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
-			ctrl.bRequestType, ctrl.bRequest,
-			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-#endif
-
-	switch (ctrl.bRequestType & USB_RECIP_MASK) {
-	case USB_RECIP_DEVICE:
-		*status = 0x1; /* Self powered */
-		*status |= pcd->remote_wakeup_enable << 1;
-		break;
-
-	case USB_RECIP_INTERFACE:
-		*status = 0;
-		break;
-
-	case USB_RECIP_ENDPOINT:
-		ep = get_ep_by_addr(pcd, ctrl.wIndex);
-		if (ep == 0 || ctrl.wLength > 2) {
-			ep0_do_stall(pcd, -EOPNOTSUPP);
-			return;
-		}
-		/** @todo check for EP stall */
-		*status = ep->stopped;
-		break;
-	}
-	pcd->ep0_pending = 1;
-	ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
-	ep0->dwc_ep.xfer_buff = (uint8_t *)status;
-	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
-	ep0->dwc_ep.xfer_len = 2;
-	ep0->dwc_ep.xfer_count = 0;
-	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
-	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-}
-/**
- * This function process the SET_FEATURE Setup Commands.
- */
-static inline void do_set_feature(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_core_global_regs_t *global_regs =
-			core_if->core_global_regs;
-	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
-	dwc_otg_pcd_ep_t	*ep = 0;
-	int32_t otg_cap_param = core_if->core_params->otg_cap;
-	gotgctl_data_t gotgctl = { .d32 = 0 };
-
-	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-			ctrl.bRequestType, ctrl.bRequest,
-			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-	DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
-
-
-	switch (ctrl.bRequestType & USB_RECIP_MASK) {
-	case USB_RECIP_DEVICE:
-		switch (ctrl.wValue) {
-		case USB_DEVICE_REMOTE_WAKEUP:
-			pcd->remote_wakeup_enable = 1;
-			break;
-
-		case USB_DEVICE_TEST_MODE:
-			/* Setup the Test Mode tasklet to do the Test
-			 * Packet generation after the SETUP Status
-			 * phase has completed. */
-
-			/** @todo This has not been tested since the
-			 * tasklet struct was put into the PCD
-			 * struct! */
-			pcd->test_mode_tasklet.next = 0;
-			pcd->test_mode_tasklet.state = 0;
-			atomic_set(&pcd->test_mode_tasklet.count, 0);
-			pcd->test_mode_tasklet.func = do_test_mode;
-			pcd->test_mode_tasklet.data = (unsigned long)pcd;
-			pcd->test_mode = ctrl.wIndex >> 8;
-			tasklet_schedule(&pcd->test_mode_tasklet);
-			break;
-
-		case USB_DEVICE_B_HNP_ENABLE:
-			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
-
-			/* dev may initiate HNP */
-			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-				pcd->b_hnp_enable = 1;
-				dwc_otg_pcd_update_otg(pcd, 0);
-				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
-				/**@todo Is the gotgctl.devhnpen cleared
-				 * by a USB Reset? */
-				gotgctl.b.devhnpen = 1;
-				gotgctl.b.hnpreq = 1;
-				dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
-			}
-			else {
-				ep0_do_stall(pcd, -EOPNOTSUPP);
-			}
-			break;
-
-		case USB_DEVICE_A_HNP_SUPPORT:
-			/* RH port supports HNP */
-			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
-			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-				pcd->a_hnp_support = 1;
-				dwc_otg_pcd_update_otg(pcd, 0);
-			}
-			else {
-				ep0_do_stall(pcd, -EOPNOTSUPP);
-			}
-			break;
-
-		case USB_DEVICE_A_ALT_HNP_SUPPORT:
-			/* other RH port does */
-			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
-			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-				pcd->a_alt_hnp_support = 1;
-				dwc_otg_pcd_update_otg(pcd, 0);
-			}
-			else {
-				ep0_do_stall(pcd, -EOPNOTSUPP);
-			}
-			break;
-		}
-		do_setup_in_status_phase(pcd);
-		break;
-
-	case USB_RECIP_INTERFACE:
-		do_gadget_setup(pcd, &ctrl);
-		break;
-
-	case USB_RECIP_ENDPOINT:
-		if (ctrl.wValue == USB_ENDPOINT_HALT) {
-			ep = get_ep_by_addr(pcd, ctrl.wIndex);
-			if (ep == 0) {
-				ep0_do_stall(pcd, -EOPNOTSUPP);
-				return;
-			}
-			ep->stopped = 1;
-			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
-		}
-		do_setup_in_status_phase(pcd);
-		break;
-	}
-}
-
-/**
- * This function process the CLEAR_FEATURE Setup Commands.
- */
-static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
-{
-	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
-	dwc_otg_pcd_ep_t	*ep = 0;
-
-	DWC_DEBUGPL(DBG_PCD,
-				"CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-				ctrl.bRequestType, ctrl.bRequest,
-				ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-
-	switch (ctrl.bRequestType & USB_RECIP_MASK) {
-	case USB_RECIP_DEVICE:
-		switch (ctrl.wValue) {
-		case USB_DEVICE_REMOTE_WAKEUP:
-			pcd->remote_wakeup_enable = 0;
-			break;
-
-		case USB_DEVICE_TEST_MODE:
-			/** @todo Add CLEAR_FEATURE for TEST modes. */
-			break;
-		}
-		do_setup_in_status_phase(pcd);
-		break;
-
-	case USB_RECIP_ENDPOINT:
-		ep = get_ep_by_addr(pcd, ctrl.wIndex);
-		if (ep == 0) {
-			ep0_do_stall(pcd, -EOPNOTSUPP);
-			return;
-		}
-
-		pcd_clear_halt(pcd, ep);
-
-		break;
-	}
-}
-
-/**
- * This function process the SET_ADDRESS Setup Commands.
- */
-static inline void do_set_address(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
-
-	if (ctrl.bRequestType == USB_RECIP_DEVICE) {
-		dcfg_data_t dcfg = {.d32=0};
-
-#ifdef DEBUG_EP0
-//			DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
-#endif
-		dcfg.b.devaddr = ctrl.wValue;
-		dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
-		do_setup_in_status_phase(pcd);
-	}
-}
-
-/**
- *	This function processes SETUP commands.	 In Linux, the USB Command
- *	processing is done in two places - the first being the PCD and the
- *	second in the Gadget Driver (for example, the File-Backed Storage
- *	Gadget Driver).
- *
- * <table>
- * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
- *
- * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
- * defined in chapter 9 of the USB 2.0 Specification chapter 9
- * </td></tr>
- *
- * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
- * requests are the ENDPOINT_HALT feature is procesed, all others the
- * interface requests are ignored.</td></tr>
- *
- * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
- * requests are processed by the PCD.  Interface requests are passed
- * to the Gadget Driver.</td></tr>
- *
- * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
- * with device address received </td></tr>
- *
- * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
- * requested descriptor</td></tr>
- *
- * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
- * not implemented by any of the existing Gadget Drivers.</td></tr>
- *
- * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
- * all EPs and enable EPs for new configuration.</td></tr>
- *
- * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
- * the current configuration</td></tr>
- *
- * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
- * EPs and enable EPs for new configuration.</td></tr>
- *
- * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
- * current interface.</td></tr>
- *
- * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
- * message.</td></tr>
- * </table>
- *
- * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
- * processed by pcd_setup. Calling the Function Driver's setup function from
- * pcd_setup processes the gadget SETUP commands.
- */
-static inline void pcd_setup(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
-	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
-
-	deptsiz0_data_t doeptsize0 = { .d32 = 0};
-
-#ifdef DEBUG_EP0
-	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-			ctrl.bRequestType, ctrl.bRequest,
-			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-#endif
-
-	doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
-
-	/** @todo handle > 1 setup packet , assert error for now */
-
-	if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
-		DWC_ERROR ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
-	}
-
-	/* Clean up the request queue */
-	dwc_otg_request_nuke(ep0);
-	ep0->stopped = 0;
-
-	if (ctrl.bRequestType & USB_DIR_IN) {
-		ep0->dwc_ep.is_in = 1;
-		pcd->ep0state = EP0_IN_DATA_PHASE;
-	}
-	else {
-		ep0->dwc_ep.is_in = 0;
-		pcd->ep0state = EP0_OUT_DATA_PHASE;
-	}
-
-	if(ctrl.wLength == 0) {
-		ep0->dwc_ep.is_in = 1;
-		pcd->ep0state = EP0_IN_STATUS_PHASE;
-	}
-
-	if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
-		/* handle non-standard (class/vendor) requests in the gadget driver */
-		do_gadget_setup(pcd, &ctrl);
-		return;
-	}
-
-	/** @todo NGS: Handle bad setup packet? */
-
-///////////////////////////////////////////
-//// --- Standard Request handling --- ////
-
-	switch (ctrl.bRequest) {
-	case USB_REQ_GET_STATUS:
-		do_get_status(pcd);
-		break;
-
-	case USB_REQ_CLEAR_FEATURE:
-		do_clear_feature(pcd);
-		break;
-
-	case USB_REQ_SET_FEATURE:
-		do_set_feature(pcd);
-		break;
-
-	case USB_REQ_SET_ADDRESS:
-		do_set_address(pcd);
-		break;
-
-	case USB_REQ_SET_INTERFACE:
-	case USB_REQ_SET_CONFIGURATION:
-//		_pcd->request_config = 1;	/* Configuration changed */
-		do_gadget_setup(pcd, &ctrl);
-		break;
-
-	case USB_REQ_SYNCH_FRAME:
-		do_gadget_setup(pcd, &ctrl);
-		break;
-
-	default:
-		/* Call the Gadget Driver's setup functions */
-		do_gadget_setup(pcd, &ctrl);
-		break;
-	}
-}
-
-/**
- * This function completes the ep0 control transfer.
- */
-static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-	dev_if->in_ep_regs[ep->dwc_ep.num];
-#ifdef DEBUG_EP0
-	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-			dev_if->out_ep_regs[ep->dwc_ep.num];
-#endif
-	deptsiz0_data_t deptsiz;
-	desc_sts_data_t desc_sts;
-	dwc_otg_pcd_request_t *req;
-	int is_last = 0;
-	dwc_otg_pcd_t *pcd = ep->pcd;
-
-	//DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
-
-	if (pcd->ep0_pending && list_empty(&ep->queue)) {
-		if (ep->dwc_ep.is_in) {
-#ifdef DEBUG_EP0
-			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
-#endif
-			do_setup_out_status_phase(pcd);
-		}
-		else {
-#ifdef DEBUG_EP0
-			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
-#endif
-			do_setup_in_status_phase(pcd);
-		}
-		pcd->ep0_pending = 0;
-		return 1;
-	}
-
-	if (list_empty(&ep->queue)) {
-		return 0;
-	}
-	req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
-
-
-	if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
-		is_last = 1;
-	}
-	else if (ep->dwc_ep.is_in) {
-		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-		if(core_if->dma_desc_enable != 0)
-			desc_sts.d32 = readl(dev_if->in_desc_addr);
-#ifdef DEBUG_EP0
-		DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
-				ep->ep.name, ep->dwc_ep.xfer_len,
-				deptsiz.b.xfersize, deptsiz.b.pktcnt);
-#endif
-
-		if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
-			((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
-			req->req.actual = ep->dwc_ep.xfer_count;
-			/* Is a Zero Len Packet needed? */
-			if (req->req.zero) {
-#ifdef DEBUG_EP0
-				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
-#endif
-			    req->req.zero = 0;
-			}
-			do_setup_out_status_phase(pcd);
-		}
-	}
-	else {
-		/* ep0-OUT */
-#ifdef DEBUG_EP0
-		deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-		DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
-				ep->ep.name, ep->dwc_ep.xfer_len,
-				deptsiz.b.xfersize,
-				deptsiz.b.pktcnt);
-#endif
-		req->req.actual = ep->dwc_ep.xfer_count;
-		/* Is a Zero Len Packet needed? */
-		if (req->req.zero) {
-#ifdef DEBUG_EP0
-			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
-#endif
-    			req->req.zero = 0;
-		}
-		if(core_if->dma_desc_enable == 0)
-			do_setup_in_status_phase(pcd);
-	}
-
-	/* Complete the request */
-	if (is_last) {
-		dwc_otg_request_done(ep, req, 0);
-		ep->dwc_ep.start_xfer_buff = 0;
-		ep->dwc_ep.xfer_buff = 0;
-		ep->dwc_ep.xfer_len = 0;
-		return 1;
-	}
-	return 0;
-}
-
-inline void aligned_buf_patch_on_buf_dma_oep_completion(dwc_otg_pcd_ep_t *ep, uint32_t byte_count)
-{
-	dwc_ep_t *dwc_ep = &ep->dwc_ep;
-	if(byte_count && dwc_ep->aligned_buf &&
-		dwc_ep->dma_addr>=dwc_ep->aligned_dma_addr &&
-		dwc_ep->dma_addr<=(dwc_ep->aligned_dma_addr+dwc_ep->aligned_buf_size))\
-	{
-		//aligned buf used, apply complete patch
-		u32 offset=(dwc_ep->dma_addr-dwc_ep->aligned_dma_addr);
-		memcpy(dwc_ep->start_xfer_buff+offset, dwc_ep->aligned_buf+offset, byte_count);
-	}
-}
-
-/**
- * This function completes the request for the EP.	If there are
- * additional requests for the EP in the queue they will be started.
- */
-static void complete_ep(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-	dev_if->in_ep_regs[ep->dwc_ep.num];
-	deptsiz_data_t deptsiz;
-	desc_sts_data_t desc_sts;
-	dwc_otg_pcd_request_t *req = 0;
-	dwc_otg_dma_desc_t* dma_desc;
-	uint32_t byte_count = 0;
-	int is_last = 0;
-	int i;
-
-	DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
-					(ep->dwc_ep.is_in?"IN":"OUT"));
-
-	/* Get any pending requests */
-	if (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-				 queue);
-		if (!req) {
-			printk("complete_ep 0x%p, req = NULL!\n", ep);
-			return;
-		}
-	}
-	else {
-		printk("complete_ep 0x%p, ep->queue empty!\n", ep);
-		return;
-	}
-	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
-
-	if (ep->dwc_ep.is_in) {
-		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-
-		if (core_if->dma_enable) {
-			//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
-			if(core_if->dma_desc_enable == 0) {
-				//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
-				if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-					byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-DWC_DEBUGPL(DBG_PCDV,"byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x)\n", byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count );
-
-					ep->dwc_ep.xfer_buff += byte_count;
-					ep->dwc_ep.dma_addr += byte_count;
-					ep->dwc_ep.xfer_count += byte_count;
-
-					DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
-							ep->ep.name, ep->dwc_ep.xfer_len,
-							deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
-					if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-						//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-					} else if(ep->dwc_ep.sent_zlp) {
-						/*
-						 * This fragment of code should initiate 0
-						 * length trasfer in case if it is queued
-						 * a trasfer with size divisible to EPs max
-						 * packet size and with usb_request zero field
-						 * is set, which means that after data is transfered,
-						 * it is also should be transfered
-						 * a 0 length packet at the end. For Slave and
-						 * Buffer DMA modes in this case SW has
-						 * to initiate 2 transfers one with transfer size,
-						 * and the second with 0 size. For Desriptor
-						 * DMA mode SW is able to initiate a transfer,
-						 * which will handle all the packets including
-						 * the last  0 legth.
-						 */
-						ep->dwc_ep.sent_zlp = 0;
-						dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-					} else {
-						is_last = 1;
-					}
-				} else {
-					DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-							 ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-							 deptsiz.b.xfersize, deptsiz.b.pktcnt);
-				}
-			} else {
-
-				dma_desc = ep->dwc_ep.desc_addr;
-				byte_count = 0;
-				ep->dwc_ep.sent_zlp = 0;
-
-				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-					desc_sts.d32 = readl(dma_desc);
-					byte_count += desc_sts.b.bytes;
-					dma_desc++;
-				}
-
-				if(byte_count == 0) {
-					ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
-					is_last = 1;
-				} else {
-					DWC_WARN("Incomplete transfer\n");
-				}
-			}
-		} else {
-			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-				/* 	Check if the whole transfer was completed,
-				 * 	if no, setup transfer for next portion of data
-				 */
-			DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
-					ep->ep.name, ep->dwc_ep.xfer_len,
-					deptsiz.b.xfersize, deptsiz.b.pktcnt);
-				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-					//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
-				} else if(ep->dwc_ep.sent_zlp) {
-					/*
-					 * This fragment of code should initiate 0
-					 * length trasfer in case if it is queued
-					 * a trasfer with size divisible to EPs max
-					 * packet size and with usb_request zero field
-					 * is set, which means that after data is transfered,
-					 * it is also should be transfered
-					 * a 0 length packet at the end. For Slave and
-					 * Buffer DMA modes in this case SW has
-					 * to initiate 2 transfers one with transfer size,
-					 * and the second with 0 size. For Desriptor
-					 * DMA mode SW is able to initiate a transfer,
-					 * which will handle all the packets including
-					 * the last  0 legth.
-					 */
-					ep->dwc_ep.sent_zlp = 0;
-					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-				} else {
-					is_last = 1;
-				}
-			}
-			else {
-				DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-						ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-						deptsiz.b.xfersize, deptsiz.b.pktcnt);
-			}
-		}
-	} else {
-		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-				dev_if->out_ep_regs[ep->dwc_ep.num];
-		desc_sts.d32 = 0;
-		if(core_if->dma_enable) {
-			//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_FROM_DEVICE);
-			if(core_if->dma_desc_enable) {
-				DWC_WARN("\n\n%s: we need a cache invalidation here!!\n\n",__func__);
-				dma_desc = ep->dwc_ep.desc_addr;
-				byte_count = 0;
-				ep->dwc_ep.sent_zlp = 0;
-				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-					desc_sts.d32 = readl(dma_desc);
-					byte_count += desc_sts.b.bytes;
-					dma_desc++;
-				}
-
-				ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
-						- byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
-
-				//todo: invalidate cache & aligned buf patch on completion
-				//
-
-				is_last = 1;
-			} else {
-				deptsiz.d32 = 0;
-				deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-
-				byte_count = (ep->dwc_ep.xfer_len -
-							 ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
-
-//				dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-
-DWC_DEBUGPL(DBG_PCDV,"ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-				//todo: invalidate cache & aligned buf patch on completion
-				dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-				aligned_buf_patch_on_buf_dma_oep_completion(ep,byte_count);
-
-				ep->dwc_ep.xfer_buff += byte_count;
-				ep->dwc_ep.dma_addr += byte_count;
-				ep->dwc_ep.xfer_count += byte_count;
-
-				/* 	Check if the whole transfer was completed,
-				 * 	if no, setup transfer for next portion of data
-				 */
-				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-					//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-				}
-				else if(ep->dwc_ep.sent_zlp) {
-					/*
-					 * This fragment of code should initiate 0
-					 * length trasfer in case if it is queued
-					 * a trasfer with size divisible to EPs max
-					 * packet size and with usb_request zero field
-					 * is set, which means that after data is transfered,
-					 * it is also should be transfered
-					 * a 0 length packet at the end. For Slave and
-					 * Buffer DMA modes in this case SW has
-					 * to initiate 2 transfers one with transfer size,
-					 * and the second with 0 size. For Desriptor
-					 * DMA mode SW is able to initiate a transfer,
-					 * which will handle all the packets including
-					 * the last  0 legth.
-					 */
-					ep->dwc_ep.sent_zlp = 0;
-					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-				} else {
-					is_last = 1;
-				}
-			}
-		} else {
-			/* 	Check if the whole transfer was completed,
-			 * 	if no, setup transfer for next portion of data
-			 */
-			if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-				//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
-			}
-			else if(ep->dwc_ep.sent_zlp) {
-				/*
-				 * This fragment of code should initiate 0
-				 * length trasfer in case if it is queued
-				 * a trasfer with size divisible to EPs max
-				 * packet size and with usb_request zero field
-				 * is set, which means that after data is transfered,
-				 * it is also should be transfered
-				 * a 0 length packet at the end. For Slave and
-				 * Buffer DMA modes in this case SW has
-				 * to initiate 2 transfers one with transfer size,
-				 * and the second with 0 size. For Desriptor
-				 * DMA mode SW is able to initiate a transfer,
-				 * which will handle all the packets including
-				 * the last  0 legth.
-				 */
-				ep->dwc_ep.sent_zlp = 0;
-				dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-			} else {
-				is_last = 1;
-			}
-		}
-
-#ifdef DEBUG
-
-		DWC_DEBUGPL(DBG_PCDV, "addr %p,	 %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
-				&out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
-				ep->dwc_ep.xfer_count,
-				deptsiz.b.xfersize,
-				deptsiz.b.pktcnt);
-#endif
-	}
-
-	/* Complete the request */
-	if (is_last) {
-		req->req.actual = ep->dwc_ep.xfer_count;
-
-		dwc_otg_request_done(ep, req, 0);
-
-		ep->dwc_ep.start_xfer_buff = 0;
-		ep->dwc_ep.xfer_buff = 0;
-		ep->dwc_ep.xfer_len = 0;
-
-		/* If there is a request in the queue start it.*/
-		start_next_request(ep);
-	}
-}
-
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function BNA interrupt for Isochronous EPs
- *
- */
-static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_ep_t		*dwc_ep = &ep->dwc_ep;
-	volatile uint32_t	*addr;
-	depctl_data_t		depctl = {.d32 = 0};
-	dwc_otg_pcd_t		*pcd = ep->pcd;
-	dwc_otg_dma_desc_t	*dma_desc;
-	int	i;
-
-	dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
-
-	if(dwc_ep->is_in) {
-		desc_sts_data_t	sts = {.d32 = 0};
-		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-		{
-			sts.d32 = readl(&dma_desc->status);
-			sts.b_iso_in.bs = BS_HOST_READY;
-			writel(sts.d32,&dma_desc->status);
-		}
-	}
-	else {
-		desc_sts_data_t	sts = {.d32 = 0};
-		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-		{
-			sts.d32 = readl(&dma_desc->status);
-			sts.b_iso_out.bs = BS_HOST_READY;
-			writel(sts.d32,&dma_desc->status);
-		}
-	}
-
-	if(dwc_ep->is_in == 0){
-		addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-	}
-	else{
-		addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-	}
-	depctl.b.epena = 1;
-	dwc_modify_reg32(addr,depctl.d32,depctl.d32);
-}
-
-/**
- * This function sets latest iso packet information(non-PTI mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-	deptsiz_data_t		deptsiz = { .d32 = 0 };
-	dma_addr_t		dma_addr;
-	uint32_t		offset;
-
-	if(ep->proc_buf_num)
-		dma_addr = ep->dma_addr1;
-	else
-		dma_addr = ep->dma_addr0;
-
-	if(ep->is_in) {
-		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-		offset = ep->data_per_frame;
-	} else {
-		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-		offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
-	}
-
-	if(!deptsiz.b.xfersize) {
-		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-		ep->pkt_info[ep->cur_pkt].status = 0;
-	} else {
-		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-		ep->pkt_info[ep->cur_pkt].status = -ENODATA;
-	}
-	ep->cur_pkt_addr += offset;
-	ep->cur_pkt_dma_addr += offset;
-	ep->cur_pkt++;
-}
-
-/**
- * This function sets latest iso packet information(DDMA mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
-	dwc_otg_dma_desc_t* dma_desc;
-	desc_sts_data_t sts = {.d32 = 0};
-	iso_pkt_info_t *iso_packet;
-	uint32_t data_per_desc;
-	uint32_t offset;
- 	int i, j;
-
-	iso_packet = dwc_ep->pkt_info;
-
-	/** Reinit closed DMA Descriptors*/
-	/** ISO OUT EP */
-	if(dwc_ep->is_in == 0) {
-		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-		offset = 0;
-
-		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-		{
-			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-			{
-				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-
-				sts.d32 = readl(&dma_desc->status);
-
-				/* Write status in iso_packet_decsriptor  */
-				iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-				if(iso_packet->status) {
-					iso_packet->status = -ENODATA;
-				}
-
-				/* Received data length */
-				if(!sts.b_iso_out.rxbytes){
-					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
-				} else {
-					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
-								(4 - dwc_ep->data_per_frame % 4);
-				}
-
-				iso_packet->offset = offset;
-
-				offset += data_per_desc;
-				dma_desc ++;
-				iso_packet ++;
-			}
-		}
-
-		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-		{
-			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-
-			sts.d32 = readl(&dma_desc->status);
-
-			/* Write status in iso_packet_decsriptor  */
-			iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-			if(iso_packet->status) {
-				iso_packet->status = -ENODATA;
-			}
-
-			/* Received data length */
-			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-
-			iso_packet->offset = offset;
-
-			offset += data_per_desc;
-			iso_packet++;
-			dma_desc++;
-		}
-
-		sts.d32 = readl(&dma_desc->status);
-
-		/* Write status in iso_packet_decsriptor  */
-		iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-		if(iso_packet->status) {
-			iso_packet->status = -ENODATA;
-		}
-		/* Received data length */
-		if(!sts.b_iso_out.rxbytes){
-			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-		} else {
-			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
-							(4 - dwc_ep->data_per_frame % 4);
-		}
-
-		iso_packet->offset = offset;
-	}
-	else /** ISO IN EP */
-	{
-		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
-		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-		{
-			sts.d32 = readl(&dma_desc->status);
-
-			/* Write status in iso packet descriptor */
-			iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-			if(iso_packet->status != 0) {
-				iso_packet->status = -ENODATA;
-
-			}
-			/* Bytes has been transfered */
-			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-
-			dma_desc ++;
-			iso_packet++;
-		}
-
-		sts.d32 = readl(&dma_desc->status);
-		while(sts.b_iso_in.bs == BS_DMA_BUSY) {
-			sts.d32 = readl(&dma_desc->status);
-		}
-
-		/* Write status in iso packet descriptor ??? do be done with ERROR codes*/
-		iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-		if(iso_packet->status != 0) {
-			iso_packet->status = -ENODATA;
-		}
-
-		/* Bytes has been transfered */
-		iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-	}
-}
-
-/**
- * This function reinitialize DMA Descriptors for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
- 	int i, j;
-	dwc_otg_dma_desc_t* dma_desc;
-	dma_addr_t dma_ad;
-	volatile uint32_t	*addr;
-	desc_sts_data_t sts = { .d32 =0 };
-	uint32_t data_per_desc;
-
-	if(dwc_ep->is_in == 0) {
-		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-	}
-	else {
-		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-	}
-
-
-	if(dwc_ep->proc_buf_num == 0) {
-		/** Buffer 0 descriptors setup */
-		dma_ad = dwc_ep->dma_addr0;
-	}
-	else {
-		/** Buffer 1 descriptors setup */
-		dma_ad = dwc_ep->dma_addr1;
-	}
-
-	/** Reinit closed DMA Descriptors*/
-	/** ISO OUT EP */
-	if(dwc_ep->is_in == 0) {
-		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
-		sts.b_iso_out.bs = BS_HOST_READY;
-		sts.b_iso_out.rxsts = 0;
-		sts.b_iso_out.l = 0;
-		sts.b_iso_out.sp = 0;
-		sts.b_iso_out.ioc = 0;
-		sts.b_iso_out.pid = 0;
-		sts.b_iso_out.framenum = 0;
-
-		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-		{
-			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-			{
-				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-				sts.b_iso_out.rxbytes = data_per_desc;
-				writel((uint32_t)dma_ad, &dma_desc->buf);
-				writel(sts.d32, &dma_desc->status);
-
-				//(uint32_t)dma_ad += data_per_desc;
-				dma_ad = (uint32_t)dma_ad + data_per_desc;
-				dma_desc ++;
-			}
-		}
-
-		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-		{
-
-			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-			sts.b_iso_out.rxbytes = data_per_desc;
-
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-
-			dma_desc++;
-			//(uint32_t)dma_ad += data_per_desc;
-			dma_ad = (uint32_t)dma_ad + data_per_desc;
-		}
-
-		sts.b_iso_out.ioc = 1;
-		sts.b_iso_out.l = dwc_ep->proc_buf_num;
-
-		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-		sts.b_iso_out.rxbytes = data_per_desc;
-
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-	}
-	else /** ISO IN EP */
-	{
-		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
-		sts.b_iso_in.bs = BS_HOST_READY;
-		sts.b_iso_in.txsts = 0;
-		sts.b_iso_in.sp = 0;
-		sts.b_iso_in.ioc = 0;
-		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-		sts.b_iso_in.framenum = dwc_ep->next_frame;
-		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-		sts.b_iso_in.l = 0;
-
-		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-		{
-			writel((uint32_t)dma_ad, &dma_desc->buf);
-			writel(sts.d32, &dma_desc->status);
-
-			sts.b_iso_in.framenum  += dwc_ep->bInterval;
-			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
-			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-			dma_desc ++;
-		}
-
-		sts.b_iso_in.ioc = 1;
-		sts.b_iso_in.l = dwc_ep->proc_buf_num;
-
-		writel((uint32_t)dma_ad, &dma_desc->buf);
-		writel(sts.d32, &dma_desc->status);
-
-		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
-	}
-	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-}
-
-
-/**
- * This function is to handle Iso EP transfer complete interrupt
- * in case Iso out packet was dropped
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP for wihich transfer complete was asserted
- *
- */
-static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
-	uint32_t dma_addr;
-	uint32_t drp_pkt;
-	uint32_t drp_pkt_cnt;
-	deptsiz_data_t deptsiz = { .d32 = 0 };
-	depctl_data_t depctl  = { .d32 = 0 };
-	int i;
-
-	deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
-
-	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
-	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
-
-	/* Setting dropped packets status */
-	for(i = 0; i < drp_pkt_cnt; ++i) {
-		dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
-		drp_pkt ++;
-		deptsiz.b.pktcnt--;
-	}
-
-
-	if(deptsiz.b.pktcnt > 0) {
-		deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
-	} else {
-		deptsiz.b.xfersize = 0;
-		deptsiz.b.pktcnt = 0;
-	}
-
-	dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
-
-	if(deptsiz.b.pktcnt > 0) {
-		if(dwc_ep->proc_buf_num) {
-			dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
-		} else {
-			dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
-		}
-
-		VERIFY_PCD_DMA_ADDR(dma_addr);
-		dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
-
-		/** Re-enable endpoint, clear nak  */
-		depctl.d32 = 0;
-		depctl.b.epena = 1;
-		depctl.b.cnak = 1;
-
-		dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
-				depctl.d32,depctl.d32);
-		return 0;
-	} else {
-		return 1;
-	}
-}
-
-/**
- * This function sets iso packets information(PTI mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- 	int i, j;
-	dma_addr_t dma_ad;
-	iso_pkt_info_t *packet_info = ep->pkt_info;
-	uint32_t offset;
-	uint32_t frame_data;
-	deptsiz_data_t deptsiz;
-
-	if(ep->proc_buf_num == 0) {
-		/** Buffer 0 descriptors setup */
-		dma_ad = ep->dma_addr0;
-	}
-	else {
-		/** Buffer 1 descriptors setup */
-		dma_ad = ep->dma_addr1;
-	}
-
-	if(ep->is_in) {
-		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-	} else {
-		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-	}
-
-	if(!deptsiz.b.xfersize) {
-		offset = 0;
-		for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
-		{
-			frame_data = ep->data_per_frame;
-			for(j = 0; j < ep->pkt_per_frm; ++j) {
-
-				/* Packet status - is not set as initially
-				 * it is set to 0 and if packet was sent
-				 successfully, status field will remain 0*/
-
-				/* Bytes has been transfered */
-				packet_info->length = (ep->maxpacket < frame_data) ?
-							ep->maxpacket : frame_data;
-
-				/* Received packet offset */
-				packet_info->offset = offset;
-				offset += packet_info->length;
-				frame_data -= packet_info->length;
-
-				packet_info ++;
-			}
-		}
-		return 1;
-	} else {
-		/* This is a workaround for in case of Transfer Complete with
-		 * PktDrpSts interrupts	merging - in this case Transfer complete
-		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
-		 * set and with DOEPTSIZ register non zero. Investigations showed,
-		 * that this happens when Out packet is dropped, but because of
-		 * interrupts merging during first interrupt handling PktDrpSts
-		 * bit is cleared and for next merged interrupts it is not reset.
-		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
-		 */
-		if(ep->is_in) {
-			return 1;
-		} else {
-			return handle_iso_out_pkt_dropped(core_if, ep);
-		}
-	}
-}
-
-/**
- * This function is to handle Iso EP transfer complete interrupt
- *
- * @param ep The EP for which transfer complete was asserted
- *
- */
-static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-	dwc_ep_t *dwc_ep = &ep->dwc_ep;
-	uint8_t is_last = 0;
-
-	if(core_if->dma_enable) {
-		if(core_if->dma_desc_enable) {
-			set_ddma_iso_pkts_info(core_if, dwc_ep);
-			reinit_ddma_iso_xfer(core_if, dwc_ep);
-			is_last = 1;
-		} else {
-			if(core_if->pti_enh_enable) {
-				if(set_iso_pkts_info(core_if, dwc_ep)) {
-					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-					dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
-					is_last = 1;
-				}
-			} else {
-				set_current_pkt_info(core_if, dwc_ep);
-				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-					is_last = 1;
-					dwc_ep->cur_pkt = 0;
-					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-					if(dwc_ep->proc_buf_num) {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-					} else {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-					}
-				}
-				dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-			}
-		}
-	} else {
-		set_current_pkt_info(core_if, dwc_ep);
-		if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-			is_last = 1;
-			dwc_ep->cur_pkt = 0;
-			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-			if(dwc_ep->proc_buf_num) {
-				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-			} else {
-				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-			}
-		}
-		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-	}
-	if(is_last)
-		dwc_otg_iso_buffer_done(ep, ep->iso_req);
-}
-
-#endif  //DWC_EN_ISOC
-
-
-/**
- * This function handles EP0 Control transfers.
- *
- * The state of the control tranfers are tracked in
- * <code>ep0state</code>.
- */
-static void handle_ep0(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-	desc_sts_data_t desc_sts;
-	deptsiz0_data_t deptsiz;
-	uint32_t byte_count;
-
-#ifdef DEBUG_EP0
-	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-	print_ep0_state(pcd);
-#endif
-
-	switch (pcd->ep0state) {
-	case EP0_DISCONNECT:
-		break;
-
-	case EP0_IDLE:
-		pcd->request_config = 0;
-
-		pcd_setup(pcd);
-		break;
-
-	case EP0_IN_DATA_PHASE:
-#ifdef DEBUG_EP0
-		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
-				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-#endif
-
-		if (core_if->dma_enable != 0) {
-			/*
-			 * For EP0 we can only program 1 packet at a time so we
-			 * need to do the make calculations after each complete.
-			 * Call write_packet to make the calculations, as in
-			 * slave mode, and use those values to determine if we
-			 * can complete.
-			 */
-			if(core_if->dma_desc_enable == 0) {
-				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
-				byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
-			}
-			else {
-				desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
-				byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
-			}
-
-			ep0->dwc_ep.xfer_count += byte_count;
-			ep0->dwc_ep.xfer_buff += byte_count;
-			ep0->dwc_ep.dma_addr += byte_count;
-		}
-		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-		}
-		else if(ep0->dwc_ep.sent_zlp) {
-			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-			ep0->dwc_ep.sent_zlp = 0;
-			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-		}
-		else {
-			ep0_complete_request(ep0);
-			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-		}
-		break;
-	case EP0_OUT_DATA_PHASE:
-#ifdef DEBUG_EP0
-		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
-				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-#endif
-		if (core_if->dma_enable != 0) {
-			if(core_if->dma_desc_enable == 0) {
-				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
-				byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
-
-				//todo: invalidate cache & aligned buf patch on completion
-				dma_sync_single_for_device(NULL,ep0->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-				aligned_buf_patch_on_buf_dma_oep_completion(ep0,byte_count);
-			}
-			else {
-				desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
-				byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
-
-				//todo: invalidate cache & aligned buf patch on completion
-				//
-
-			}
-			ep0->dwc_ep.xfer_count += byte_count;
-			ep0->dwc_ep.xfer_buff += byte_count;
-			ep0->dwc_ep.dma_addr += byte_count;
-		}
-		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-		}
-		else if(ep0->dwc_ep.sent_zlp) {
-			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-			ep0->dwc_ep.sent_zlp = 0;
-			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-	}
-		else {
-			ep0_complete_request(ep0);
-			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-		}
-		break;
-
-	case EP0_IN_STATUS_PHASE:
-	case EP0_OUT_STATUS_PHASE:
-		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
-				ep0_complete_request(ep0);
-				pcd->ep0state = EP0_IDLE;
-				ep0->stopped = 1;
-				ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
-
-		/* Prepare for more SETUP Packets */
-		if(core_if->dma_enable) {
-			ep0_out_start(core_if, pcd);
-		}
-		break;
-
-	case EP0_STALL:
-		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
-		break;
-	}
-#ifdef DEBUG_EP0
-	print_ep0_state(pcd);
-#endif
-}
-
-
-/**
- * Restart transfer
- */
-static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
-{
-	dwc_otg_core_if_t *core_if;
-	dwc_otg_dev_if_t *dev_if;
-	deptsiz_data_t dieptsiz = {.d32=0};
-	dwc_otg_pcd_ep_t *ep;
-
-	ep = get_in_ep(pcd, epnum);
-
-#ifdef DWC_EN_ISOC
-	if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-		return;
-	}
-#endif /* DWC_EN_ISOC  */
-
-	core_if = GET_CORE_IF(pcd);
-	dev_if = core_if->dev_if;
-
-	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-
-	DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
-			" stopped=%d\n", ep->dwc_ep.xfer_buff,
-			ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-			ep->stopped);
-	/*
-	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
-	 */
-	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
-		 ep->dwc_ep.start_xfer_buff != 0) {
-		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
-			ep->dwc_ep.xfer_count = 0;
-			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
-			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-		}
-		else {
-			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
-			/* convert packet size to dwords. */
-			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
-			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-		}
-		ep->stopped = 0;
-		DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
-					"xfer_len=%0x stopped=%d\n",
-					ep->dwc_ep.xfer_buff,
-					ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-					ep->stopped
-					);
-		if (epnum == 0) {
-			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
-		}
-		else {
-			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-		}
-	}
-}
-
-
-/**
- * handle the IN EP disable interrupt.
- */
-static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
-						 const uint32_t epnum)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	deptsiz_data_t dieptsiz = {.d32=0};
-	dctl_data_t dctl = {.d32=0};
-	dwc_otg_pcd_ep_t *ep;
-	dwc_ep_t *dwc_ep;
-
-	ep = get_in_ep(pcd, epnum);
-	dwc_ep = &ep->dwc_ep;
-
-	if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-		return;
-	}
-
-	DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
-			dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
-	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-
-	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-			dieptsiz.b.pktcnt,
-			dieptsiz.b.xfersize);
-
-	if (ep->stopped) {
-		/* Flush the Tx FIFO */
-		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-		/* Clear the Global IN NP NAK */
-		dctl.d32 = 0;
-		dctl.b.cgnpinnak = 1;
-		dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-					 dctl.d32, 0);
-		/* Restart the transaction */
-		if (dieptsiz.b.pktcnt != 0 ||
-			dieptsiz.b.xfersize != 0) {
-			restart_transfer(pcd, epnum);
-		}
-	}
-	else {
-		/* Restart the transaction */
-		if (dieptsiz.b.pktcnt != 0 ||
-			dieptsiz.b.xfersize != 0) {
-			restart_transfer(pcd, epnum);
-		}
-		DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
-	}
-}
-
-/**
- * Handler for the IN EP timeout handshake interrupt.
- */
-static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
-						const uint32_t epnum)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-
-#ifdef DEBUG
-	deptsiz_data_t dieptsiz = {.d32=0};
-	uint32_t num = 0;
-#endif
-	dctl_data_t dctl = {.d32=0};
-	dwc_otg_pcd_ep_t *ep;
-
-	gintmsk_data_t intr_mask = {.d32 = 0};
-
-	ep = get_in_ep(pcd, epnum);
-
-	/* Disable the NP Tx Fifo Empty Interrrupt */
-	if (!core_if->dma_enable) {
-		intr_mask.b.nptxfempty = 1;
-		dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-	}
-	/** @todo NGS Check EP type.
-	 * Implement for Periodic EPs */
-	/*
-	 * Non-periodic EP
-	 */
-	/* Enable the Global IN NAK Effective Interrupt */
-	intr_mask.b.ginnakeff = 1;
-	dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-					  0, intr_mask.d32);
-
-	/* Set Global IN NAK */
-	dctl.b.sgnpinnak = 1;
-	dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-					 dctl.d32, dctl.d32);
-
-	ep->stopped = 1;
-
-#ifdef DEBUG
-	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
-	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-			dieptsiz.b.pktcnt,
-			dieptsiz.b.xfersize);
-#endif
-
-#ifdef DISABLE_PERIODIC_EP
-	/*
-	 * Set the NAK bit for this EP to
-	 * start the disable process.
-	 */
-	diepctl.d32 = 0;
-	diepctl.b.snak = 1;
-	dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
-	ep->disabling = 1;
-	ep->stopped = 1;
-#endif
-}
-
-/**
- * Handler for the IN EP NAK interrupt.
- */
-static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
-						const uint32_t epnum)
-{
-        /** @todo implement ISR */
-        dwc_otg_core_if_t* core_if;
-	diepmsk_data_t intr_mask = { .d32 = 0};
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
-	core_if = GET_CORE_IF(pcd);
-	intr_mask.b.nak = 1;
-
-	if(core_if->multiproc_int_enable) {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
-					  intr_mask.d32, 0);
-	} else {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
-					  intr_mask.d32, 0);
-	}
-
-	return 1;
-}
-
-/**
- * Handler for the OUT EP Babble interrupt.
- */
-static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
-						const uint32_t epnum)
-{
-        /** @todo implement ISR */
-        dwc_otg_core_if_t* core_if;
-	doepmsk_data_t intr_mask = { .d32 = 0};
-
- 	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
-	core_if = GET_CORE_IF(pcd);
-	intr_mask.b.babble = 1;
-
-	if(core_if->multiproc_int_enable) {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-					  intr_mask.d32, 0);
-	} else {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-					  intr_mask.d32, 0);
-	}
-
-	return 1;
-}
-
-/**
- * Handler for the OUT EP NAK interrupt.
- */
-static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
-						const uint32_t epnum)
-{
-        /** @todo implement ISR */
-        dwc_otg_core_if_t* core_if;
-	doepmsk_data_t intr_mask = { .d32 = 0};
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
-	core_if = GET_CORE_IF(pcd);
-	intr_mask.b.nak = 1;
-
-	if(core_if->multiproc_int_enable) {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-					  intr_mask.d32, 0);
-	} else {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-					  intr_mask.d32, 0);
-	}
-
-	return 1;
-}
-
-/**
- * Handler for the OUT EP NYET interrupt.
- */
-static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
-						const uint32_t epnum)
-{
-        /** @todo implement ISR */
-        dwc_otg_core_if_t* core_if;
-	doepmsk_data_t intr_mask = { .d32 = 0};
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
-	core_if = GET_CORE_IF(pcd);
-	intr_mask.b.nyet = 1;
-
-	if(core_if->multiproc_int_enable) {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-					  intr_mask.d32, 0);
-	} else {
-		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-					  intr_mask.d32, 0);
-	}
-
-	return 1;
-}
-
-/**
- * This interrupt indicates that an IN EP has a pending Interrupt.
- * The sequence for handling the IN EP interrupt is shown below:
- * -#	Read the Device All Endpoint Interrupt register
- * -#	Repeat the following for each IN EP interrupt bit set (from
- *		LSB to MSB).
- * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
- * -#	If "Transfer Complete" call the request complete function
- * -#	If "Endpoint Disabled" complete the EP disable procedure.
- * -#	If "AHB Error Interrupt" log error
- * -#	If "Time-out Handshake" log error
- * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
- *		FIFO.
- * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
- *		Mismatch Interrupt)
- */
-static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
-{
-#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
-do { \
-		diepint_data_t diepint = {.d32=0}; \
-		diepint.b.__intr = 1; \
-		dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
-		diepint.d32); \
-} while (0)
-
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	diepint_data_t diepint = {.d32=0};
-	dctl_data_t dctl = {.d32=0};
-	depctl_data_t depctl = {.d32=0};
-	uint32_t ep_intr;
-	uint32_t epnum = 0;
-	dwc_otg_pcd_ep_t *ep;
-	dwc_ep_t *dwc_ep;
-	gintmsk_data_t intr_mask = {.d32 = 0};
-
-	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-
-	/* Read in the device interrupt bits */
-	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
-
-	/* Service the Device IN interrupts for each endpoint */
-	while(ep_intr) {
-		if (ep_intr&0x1) {
-			uint32_t empty_msk;
-			/* Get EP pointer */
-			ep = get_in_ep(pcd, epnum);
-			dwc_ep = &ep->dwc_ep;
-
-			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-			empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-
-			DWC_DEBUGPL(DBG_PCDV,
-					"IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
-					epnum,
-					empty_msk,
-					depctl.d32);
-
-			DWC_DEBUGPL(DBG_PCD,
-					"EP%d-%s: type=%d, mps=%d\n",
-					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-					dwc_ep->type, dwc_ep->maxpacket);
-
-			diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
-
-			DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
-			/* Transfer complete */
-			if (diepint.b.xfercompl) {
-				/* Disable the NP Tx FIFO Empty
-				 * Interrrupt */
-					if(core_if->en_multiple_tx_fifo == 0) {
-					intr_mask.b.nptxfempty = 1;
-					dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-				}
-				else {
-					/* Disable the Tx FIFO Empty Interrupt for this EP */
-					uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
-					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-					fifoemptymsk, 0);
-				}
-				/* Clear the bit in DIEPINTn for this interrupt */
-				CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
-
-				/* Complete the transfer */
-				if (epnum == 0) {
-					handle_ep0(pcd);
-				}
-#ifdef DWC_EN_ISOC
-				else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-					if(!ep->stopped)
-						complete_iso_ep(ep);
-				}
-#endif //DWC_EN_ISOC
-				else {
-
-					complete_ep(ep);
-				}
-			}
-			/* Endpoint disable	 */
-			if (diepint.b.epdisabled) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
-				handle_in_ep_disable_intr(pcd, epnum);
-
-				/* Clear the bit in DIEPINTn for this interrupt */
-				CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
-			}
-			/* AHB Error */
-			if (diepint.b.ahberr) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
-				/* Clear the bit in DIEPINTn for this interrupt */
-				CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
-			}
-			/* TimeOUT Handshake (non-ISOC IN EPs) */
-			if (diepint.b.timeout) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
-				handle_in_ep_timeout_intr(pcd, epnum);
-
-				CLEAR_IN_EP_INTR(core_if,epnum,timeout);
-			}
-			/** IN Token received with TxF Empty */
-			if (diepint.b.intktxfemp) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
-								epnum);
-				if (!ep->stopped && epnum != 0) {
-
-					diepmsk_data_t diepmsk = { .d32 = 0};
-					diepmsk.b.intktxfemp = 1;
-
-					if(core_if->multiproc_int_enable) {
-						dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
-							diepmsk.d32, 0);
-					} else {
-						dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
-					}
-					start_next_request(ep);
-				}
-				else if(core_if->dma_desc_enable && epnum == 0 &&
-						pcd->ep0state == EP0_OUT_STATUS_PHASE) {
-					// EP0 IN set STALL
-					depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-
-					/* set the disable and stall bits */
-					if (depctl.b.epena) {
-						depctl.b.epdis = 1;
-					}
-					depctl.b.stall = 1;
-					dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
-				}
-				CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
-			}
-			/** IN Token Received with EP mismatch */
-			if (diepint.b.intknepmis) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
-				CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
-			}
-			/** IN Endpoint NAK Effective */
-			if (diepint.b.inepnakeff) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
-				/* Periodic EP */
-				if (ep->disabling) {
-					depctl.d32 = 0;
-					depctl.b.snak = 1;
-					depctl.b.epdis = 1;
-					dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-				}
-				CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
-
-			}
-
-			/** IN EP Tx FIFO Empty Intr */
-			if (diepint.b.emptyintr) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
-				write_empty_tx_fifo(pcd, epnum);
-
-				CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
-			}
-
-			/** IN EP BNA Intr */
-			if (diepint.b.bna) {
-				CLEAR_IN_EP_INTR(core_if,epnum,bna);
-				if(core_if->dma_desc_enable) {
-#ifdef DWC_EN_ISOC
-					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-						/*
-						 * This checking is performed to prevent first "false" BNA
-						 * handling occuring right after reconnect
-						 */
-						if(dwc_ep->next_frame != 0xffffffff)
-							dwc_otg_pcd_handle_iso_bna(ep);
-					}
-					else
-#endif //DWC_EN_ISOC
-					{
-						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-
-						/* If Global Continue on BNA is disabled - disable EP */
-						if(!dctl.b.gcontbna) 						{
-							depctl.d32 = 0;
-							depctl.b.snak = 1;
-							depctl.b.epdis = 1;
-							dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-						} else {
-							start_next_request(ep);
-						}
-					}
-				}
-			}
-			/* NAK Interrutp */
-			if (diepint.b.nak) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
-				handle_in_ep_nak_intr(pcd, epnum);
-
-				CLEAR_IN_EP_INTR(core_if,epnum,nak);
-			}
-		}
-		epnum++;
-		ep_intr >>=1;
-	}
-
-	return 1;
-#undef CLEAR_IN_EP_INTR
-}
-
-/**
- * This interrupt indicates that an OUT EP has a pending Interrupt.
- * The sequence for handling the OUT EP interrupt is shown below:
- * -#	Read the Device All Endpoint Interrupt register
- * -#	Repeat the following for each OUT EP interrupt bit set (from
- *		LSB to MSB).
- * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
- * -#	If "Transfer Complete" call the request complete function
- * -#	If "Endpoint Disabled" complete the EP disable procedure.
- * -#	If "AHB Error Interrupt" log error
- * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
- *		Command Processing)
- */
-static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
-{
-#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
-do { \
-		doepint_data_t doepint = {.d32=0}; \
-		doepint.b.__intr = 1; \
-		dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
-		doepint.d32); \
-} while (0)
-
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-	uint32_t ep_intr;
-	doepint_data_t doepint = {.d32=0};
-	dctl_data_t dctl = {.d32=0};
-	depctl_data_t doepctl = {.d32=0};
-	uint32_t epnum = 0;
-	dwc_otg_pcd_ep_t *ep;
-	dwc_ep_t *dwc_ep;
-
-	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-
-	/* Read in the device interrupt bits */
-	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
-
-	while(ep_intr) {
-		if (ep_intr&0x1) {
-			/* Get EP pointer */
-			ep = get_out_ep(pcd, epnum);
-			dwc_ep = &ep->dwc_ep;
-
-#ifdef VERBOSE
-			DWC_DEBUGPL(DBG_PCDV,
-					"EP%d-%s: type=%d, mps=%d\n",
-					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-					dwc_ep->type, dwc_ep->maxpacket);
-#endif
-			doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
-
-			/* Transfer complete */
-			if (doepint.b.xfercompl) {
-				if (epnum == 0) {
-					/* Clear the bit in DOEPINTn for this interrupt */
-					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-					if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
-						handle_ep0(pcd);
-#ifdef DWC_EN_ISOC
-				} else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-					if (doepint.b.pktdrpsts == 0) {
-						/* Clear the bit in DOEPINTn for this interrupt */
-						CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-						complete_iso_ep(ep);
-					} else {
-						doepint_data_t doepint = {.d32=0};
-						doepint.b.xfercompl = 1;
-						doepint.b.pktdrpsts = 1;
-						dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
-							doepint.d32);
-						if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
-							complete_iso_ep(ep);
-						}
-					}
-#endif //DWC_EN_ISOC
-				} else {
-					/* Clear the bit in DOEPINTn for this interrupt */
-					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-					complete_ep(ep);
-				}
-
-			}
-
-			/* Endpoint disable	 */
-			if (doepint.b.epdisabled) {
-				/* Clear the bit in DOEPINTn for this interrupt */
-				CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
-			}
-			/* AHB Error */
-			if (doepint.b.ahberr) {
-				DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
-				DWC_DEBUGPL(DBG_PCD,"EP DMA REG	 %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
-				CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
-			}
-			/* Setup Phase Done (contorl EPs) */
-			if (doepint.b.setup) {
-#ifdef DEBUG_EP0
-				DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
-							epnum);
-#endif
-				CLEAR_OUT_EP_INTR(core_if,epnum,setup);
-				handle_ep0(pcd);
-			}
-
-			/** OUT EP BNA Intr */
-			if (doepint.b.bna) {
-				CLEAR_OUT_EP_INTR(core_if,epnum,bna);
-				if(core_if->dma_desc_enable) {
-#ifdef DWC_EN_ISOC
-					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-						/*
-						 * This checking is performed to prevent first "false" BNA
-						 * handling occuring right after reconnect
-						 */
-						if(dwc_ep->next_frame != 0xffffffff)
-							dwc_otg_pcd_handle_iso_bna(ep);
-					}
-					else
-#endif //DWC_EN_ISOC
-					{
-						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-
-						/* If Global Continue on BNA is disabled - disable EP*/
-						if(!dctl.b.gcontbna) {
-							doepctl.d32 = 0;
-							doepctl.b.snak = 1;
-							doepctl.b.epdis = 1;
-							dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
-						} else {
-							start_next_request(ep);
-						}
-					}
-				}
-			}
-			if (doepint.b.stsphsercvd) {
-				CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
-				if(core_if->dma_desc_enable) {
-					do_setup_in_status_phase(pcd);
-				}
-			}
-			/* Babble Interrutp */
-			if (doepint.b.babble) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
-				handle_out_ep_babble_intr(pcd, epnum);
-
-				CLEAR_OUT_EP_INTR(core_if,epnum,babble);
-			}
-			/* NAK Interrutp */
-			if (doepint.b.nak) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
-				handle_out_ep_nak_intr(pcd, epnum);
-
-				CLEAR_OUT_EP_INTR(core_if,epnum,nak);
-			}
-			/* NYET Interrutp */
-			if (doepint.b.nyet) {
-				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
-				handle_out_ep_nyet_intr(pcd, epnum);
-
-				CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
-			}
-		}
-
-		epnum++;
-		ep_intr >>=1;
-	}
-
-	return 1;
-
-#undef CLEAR_OUT_EP_INTR
-}
-
-
-/**
- * Incomplete ISO IN Transfer Interrupt.
- * This interrupt indicates one of the following conditions occurred
- * while transmitting an ISOC transaction.
- * - Corrupted IN Token for ISOC EP.
- * - Packet not complete in FIFO.
- * The follow actions will be taken:
- *	-#	Determine the EP
- *	-#	Set incomplete flag in dwc_ep structure
- *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
- *		Flush FIFO
- */
-int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
-{
-	gintsts_data_t 		gintsts;
-
-
-#ifdef DWC_EN_ISOC
-	dwc_otg_dev_if_t 	*dev_if;
-	deptsiz_data_t 		deptsiz = { .d32 = 0};
-	depctl_data_t		depctl = { .d32 = 0};
-	dsts_data_t		dsts = { .d32 = 0};
-	dwc_ep_t		*dwc_ep;
-	int i;
-
-	dev_if = GET_CORE_IF(pcd)->dev_if;
-
-	for(i = 1; i <= dev_if->num_in_eps; ++i) {
-		dwc_ep = &pcd->in_ep[i].dwc_ep;
-		if(dwc_ep->active &&
-			dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
-		{
-			deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
-			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-
-			if(depctl.b.epdis && deptsiz.d32) {
-				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
-				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-					dwc_ep->cur_pkt = 0;
-					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-
-					if(dwc_ep->proc_buf_num) {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-					} else {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-					}
-				}
-
-				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-				dwc_ep->next_frame = dsts.b.soffn;
-
-				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-			}
-		}
-	}
-
-#else
-        gintmsk_data_t intr_mask = { .d32 = 0};
-        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-                          "IN ISOC Incomplete");
-
-        intr_mask.b.incomplisoin = 1;
-        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-                                intr_mask.d32, 0);
-#endif //DWC_EN_ISOC
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.incomplisoin = 1;
-	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-				gintsts.d32);
-
-	return 1;
-}
-
-/**
- * Incomplete ISO OUT Transfer Interrupt.
- *
- * This interrupt indicates that the core has dropped an ISO OUT
- * packet.	The following conditions can be the cause:
- * - FIFO Full, the entire packet would not fit in the FIFO.
- * - CRC Error
- * - Corrupted Token
- * The follow actions will be taken:
- *	-#	Determine the EP
- *	-#	Set incomplete flag in dwc_ep structure
- *	-#	Read any data from the FIFO
- *	-#	Disable EP.	 when "Endpoint Disabled" interrupt is received
- *		re-enable EP.
- */
-int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
-{
-	/* @todo implement ISR */
-	gintsts_data_t gintsts;
-
-#ifdef DWC_EN_ISOC
-	dwc_otg_dev_if_t 	*dev_if;
-	deptsiz_data_t 		deptsiz = { .d32 = 0};
-	depctl_data_t		depctl = { .d32 = 0};
-	dsts_data_t		dsts = { .d32 = 0};
-	dwc_ep_t		*dwc_ep;
-	int i;
-
-	dev_if = GET_CORE_IF(pcd)->dev_if;
-
-	for(i = 1; i <= dev_if->num_out_eps; ++i) {
-		dwc_ep = &pcd->in_ep[i].dwc_ep;
-		if(pcd->out_ep[i].dwc_ep.active &&
-			pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
-		{
-			deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
-			depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-
-			if(depctl.b.epdis && deptsiz.d32) {
-				set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
-				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-					dwc_ep->cur_pkt = 0;
-					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-
-					if(dwc_ep->proc_buf_num) {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-					} else {
-						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-					}
-				}
-
-				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-				dwc_ep->next_frame = dsts.b.soffn;
-
-				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-			}
-		}
-	}
-#else
-        /** @todo implement ISR */
-        gintmsk_data_t intr_mask = { .d32 = 0};
-
-        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-                          "OUT ISOC Incomplete");
-
-        intr_mask.b.incomplisoout = 1;
-        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-                                intr_mask.d32, 0);
-
-#endif // DWC_EN_ISOC
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.incomplisoout = 1;
-	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-				gintsts.d32);
-
-	return 1;
-}
-
-/**
- * This function handles the Global IN NAK Effective interrupt.
- *
- */
-int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-	depctl_data_t diepctl = { .d32 = 0};
-	depctl_data_t diepctl_rd = { .d32 = 0};
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	gintsts_data_t gintsts;
-	int i;
-
-	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
-
-	/* Disable all active IN EPs */
-	diepctl.b.epdis = 1;
-	diepctl.b.snak = 1;
-
-	for (i=0; i <= dev_if->num_in_eps; i++)
-	{
-		diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-		if (diepctl_rd.b.epena) {
-			dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
-						diepctl.d32);
-		}
-	}
-	/* Disable the Global IN NAK Effective Interrupt */
-	intr_mask.b.ginnakeff = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-					  intr_mask.d32, 0);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.ginnakeff = 1;
-	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-						 gintsts.d32);
-
-	return 1;
-}
-
-/**
- * OUT NAK Effective.
- *
- */
-int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
-{
-	gintmsk_data_t intr_mask = { .d32 = 0};
-	gintsts_data_t gintsts;
-
-	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-			  "Global IN NAK Effective\n");
-	/* Disable the Global IN NAK Effective Interrupt */
-	intr_mask.b.goutnakeff = 1;
-	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-					  intr_mask.d32, 0);
-
-	/* Clear interrupt */
-	gintsts.d32 = 0;
-	gintsts.b.goutnakeff = 1;
-	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-						 gintsts.d32);
-
-	return 1;
-}
-
-
-/**
- * PCD interrupt handler.
- *
- * The PCD handles the device interrupts.  Many conditions can cause a
- * device interrupt. When an interrupt occurs, the device interrupt
- * service routine determines the cause of the interrupt and
- * dispatches handling to the appropriate function. These interrupt
- * handling functions are described below.
- *
- * All interrupt registers are processed from LSB to MSB.
- *
- */
-int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
-{
-	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-#ifdef VERBOSE
-	dwc_otg_core_global_regs_t *global_regs =
-			core_if->core_global_regs;
-#endif
-	gintsts_data_t gintr_status;
-	int32_t retval = 0;
-
-
-#ifdef VERBOSE
-	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
-				__func__,
-				dwc_read_reg32(&global_regs->gintsts),
-				dwc_read_reg32(&global_regs->gintmsk));
-#endif
-
-	if (dwc_otg_is_device_mode(core_if)) {
-		SPIN_LOCK(&pcd->lock);
-#ifdef VERBOSE
-		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
-						__func__,
-						dwc_read_reg32(&global_regs->gintsts),
-						dwc_read_reg32(&global_regs->gintmsk));
-#endif
-
-		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
-/*
-		if (!gintr_status.d32) {
-			SPIN_UNLOCK(&pcd->lock);
-			return 0;
-		}
-*/
-		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
-					__func__, gintr_status.d32);
-
-		if (gintr_status.b.sofintr) {
-			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
-		}
-		if (gintr_status.b.rxstsqlvl) {
-			retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
-		}
-		if (gintr_status.b.nptxfempty) {
-			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
-		}
-		if (gintr_status.b.ginnakeff) {
-			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
-		}
-		if (gintr_status.b.goutnakeff) {
-			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
-		}
-		if (gintr_status.b.i2cintr) {
-			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
-		}
-		if (gintr_status.b.erlysuspend) {
-			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
-		}
-		if (gintr_status.b.usbreset) {
-			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
-		}
-		if (gintr_status.b.enumdone) {
-			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
-		}
-		if (gintr_status.b.isooutdrop) {
-			retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
-		}
-		if (gintr_status.b.eopframe) {
-			retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
-		}
-		if (gintr_status.b.epmismatch) {
-			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
-		}
-		if (gintr_status.b.inepint) {
-			if(!core_if->multiproc_int_enable) {
-				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-			}
-		}
-		if (gintr_status.b.outepintr) {
-			if(!core_if->multiproc_int_enable) {
-				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-			}
-		}
-		if (gintr_status.b.incomplisoin) {
-			retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
-		}
-		if (gintr_status.b.incomplisoout) {
-			retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
-		}
-
-		/* In MPI mode De vice Endpoints intterrupts are asserted
-		 * without setting outepintr and inepint bits set, so these
-		 * Interrupt handlers are called without checking these bit-fields
-		 */
-		if(core_if->multiproc_int_enable) {
-			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-		}
-#ifdef VERBOSE
-		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
-						dwc_read_reg32(&global_regs->gintsts));
-#endif
-		SPIN_UNLOCK(&pcd->lock);
-	}
-	S3C2410X_CLEAR_EINTPEND();
-
-	return retval;
-}
-
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_plat.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_plat.h
deleted file mode 100644
index 7b9ae57..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_plat.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
- * $Revision: #23 $
- * $Date: 2008/07/15 $
- * $Change: 1064915 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_PLAT_H__)
-#define __DWC_OTG_PLAT_H__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-/* Changed all readl and writel to __raw_readl, __raw_writel */
-
-/**
- * @file
- *
- * This file contains the Platform Specific constants, interfaces
- * (functions and macros) for Linux.
- *
- */
-//#if !defined(__LINUX_ARM_ARCH__)
-//#error "The contents of this file is Linux specific!!!"
-//#endif
-
-/**
- * Reads the content of a register.
- *
- * @param reg address of register to read.
- * @return contents of the register.
- *
-
- * Usage:<br>
- * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
- */
-static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
-{
-		  return __raw_readl(reg);
-     //   return readl(reg);
-};
-
-/**
- * Writes a register with a 32 bit value.
- *
- * @param reg address of register to read.
- * @param value to write to _reg.
- *
- * Usage:<br>
- * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
- */
-static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
-{
-     //   writel( value, reg );
-		  __raw_writel(value, reg);
-
-};
-
-/**
- * This function modifies bit values in a register.  Using the
- * algorithm: (reg_contents & ~clear_mask) | set_mask.
- *
- * @param reg address of register to read.
- * @param clear_mask bit mask to be cleared.
- * @param set_mask bit mask to be set.
- *
- * Usage:<br>
- * <code> // Clear the SOF Interrupt Mask bit and <br>
- * // set the OTG Interrupt mask bit, leaving all others as they were.
- *    dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
- */
-static __inline__
- void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
-{
-      //  writel( (readl(reg) & ~clear_mask) | set_mask, reg );
-        __raw_writel( (__raw_readl(reg) & ~clear_mask) | set_mask, reg );
-};
-
-
-/**
- * Wrapper for the OS micro-second delay function.
- * @param[in] usecs Microseconds of delay
- */
-static __inline__ void UDELAY( const uint32_t usecs )
-{
-        udelay( usecs );
-}
-
-/**
- * Wrapper for the OS milli-second delay function.
- * @param[in] msecs milliseconds of delay
- */
-static __inline__ void MDELAY( const uint32_t msecs )
-{
-        mdelay( msecs );
-}
-
-/**
- * Wrapper for the Linux spin_lock.  On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_LOCK( spinlock_t *lock )
-{
-        spin_lock(lock);
-}
-
-/**
- * Wrapper for the Linux spin_unlock.  On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
-{
-        spin_unlock(lock);
-}
-
-/**
- * Wrapper (macro) for the Linux spin_lock_irqsave.  On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param l Pointer to the spinlock.
- * @param f unsigned long for irq flags storage.
- */
-#define SPIN_LOCK_IRQSAVE( l, f )  spin_lock_irqsave(l,f);
-
-/**
- * Wrapper (macro) for the Linux spin_unlock_irqrestore.  On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param l Pointer to the spinlock.
- * @param f unsigned long for irq flags storage.
- */
-#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
-
-/*
- * Debugging support vanishes in non-debug builds.
- */
-
-
-/**
- * The Debug Level bit-mask variable.
- */
-extern uint32_t g_dbg_lvl;
-/**
- * Set the Debug Level variable.
- */
-static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
-{
-        uint32_t old = g_dbg_lvl;
-        g_dbg_lvl = new;
-        return old;
-}
-
-/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-#define DBG_CIL		(0x2)
-/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
- * messages */
-#define DBG_CILV	(0x20)
-/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
- *  messages */
-#define DBG_PCD		(0x4)
-/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
- * messages */
-#define DBG_PCDV	(0x40)
-/** When debug level has the DBG_HCD bit set, display Host debug messages */
-#define DBG_HCD		(0x8)
-/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
- * messages */
-#define DBG_HCDV	(0x80)
-/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
- *  mode. */
-#define DBG_HCD_URB	(0x800)
-#define DBG_HCD_FLOOD (0x1)
-
-/** When debug level has any bit set, display debug messages */
-#define DBG_ANY		(0xFF)
-
-/** All debug messages off */
-#define DBG_OFF		0
-
-/** Prefix string for DWC_DEBUG print macros. */
-#define USB_DWC "DWC_otg: "
-
-/**
- * Print a debug message when the Global debug level variable contains
- * the bit defined in <code>lvl</code>.
- *
- * @param[in] lvl - Debug level, use one of the DBG_ constants above.
- * @param[in] x - like printf
- *
- *    Example:<p>
- * <code>
- *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
- * </code>
- * <br>
- * results in:<br>
- * <code>
- * usb-DWC_otg: dwc_otg_cil_init(ca867000)
- * </code>
- */
-#ifdef DEBUG
-
-# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
-
-# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-
-#else
-
-# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-# define DWC_DEBUGP(x...)
-
-# define CHK_DEBUG_LEVEL(level) (0)
-
-#endif /*DEBUG*/
-
-/**
- * Print an Error message.
- */
-#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-/**
- * Print a Warning message.
- */
-#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-/**
- * Print a notice (normal but significant message).
- */
-#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-/**
- *  Basic message printing.
- */
-#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-
-#endif
-
diff --git a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_regs.h b/target/linux/cns3xxx/files/drivers/usb/dwc/otg_regs.h
deleted file mode 100644
index 3c3ace6..0000000
--- a/target/linux/cns3xxx/files/drivers/usb/dwc/otg_regs.h
+++ /dev/null
@@ -1,2059 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
- * $Revision: #72 $
- * $Date: 2008/09/19 $
- * $Change: 1099526 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#ifndef __DWC_OTG_REGS_H__
-#define __DWC_OTG_REGS_H__
-
-/**
- * @file
- *
- * This file contains the data structures for accessing the DWC_otg core registers.
- *
- * The application interfaces with the HS OTG core by reading from and
- * writing to the Control and Status Register (CSR) space through the
- * AHB Slave interface. These registers are 32 bits wide, and the
- * addresses are 32-bit-block aligned.
- * CSRs are classified as follows:
- * - Core Global Registers
- * - Device Mode Registers
- * - Device Global Registers
- * - Device Endpoint Specific Registers
- * - Host Mode Registers
- * - Host Global Registers
- * - Host Port CSRs
- * - Host Channel Specific Registers
- *
- * Only the Core Global registers can be accessed in both Device and
- * Host modes. When the HS OTG core is operating in one mode, either
- * Device or Host, the application must not access registers from the
- * other mode. When the core switches from one mode to another, the
- * registers in the new mode of operation must be reprogrammed as they
- * would be after a power-on reset.
- */
-
-/** Maximum number of Periodic FIFOs */
-#define MAX_PERIO_FIFOS 15
-/** Maximum number of Transmit FIFOs */
-#define MAX_TX_FIFOS 15
-
-/** Maximum number of Endpoints/HostChannels */
-#define MAX_EPS_CHANNELS 16
-
-/****************************************************************************/
-/** DWC_otg Core registers .
- * The dwc_otg_core_global_regs structure defines the size
- * and relative field offsets for the Core Global registers.
- */
-typedef struct dwc_otg_core_global_regs
-{
-	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
-	volatile uint32_t gotgctl;
-	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
-	volatile uint32_t gotgint;
-	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
-	volatile uint32_t gahbcfg;
-
-#define DWC_GLBINTRMASK		0x0001
-#define DWC_DMAENABLE		0x0020
-#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
-#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
-#define DWC_PTXEMPTYLVL_EMPTY	0x0100
-#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
-
-	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
-	volatile uint32_t gusbcfg;
-	/**Core Reset Register.	 <i>Offset: 010h</i> */
-	volatile uint32_t grstctl;
-	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
-	volatile uint32_t gintsts;
-	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
-	volatile uint32_t gintmsk;
-	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
-	volatile uint32_t grxstsr;
-	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
-	volatile uint32_t grxstsp;
-	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
-	volatile uint32_t grxfsiz;
-	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
-	volatile uint32_t gnptxfsiz;
-	/**Non Periodic Transmit FIFO/Queue Status Register (Read
-	 * Only). <i>Offset: 02Ch</i> */
-	volatile uint32_t gnptxsts;
-	/**I2C Access Register.	 <i>Offset: 030h</i> */
-	volatile uint32_t gi2cctl;
-	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
-	volatile uint32_t gpvndctl;
-	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
-	volatile uint32_t ggpio;
-	/**User ID Register.  <i>Offset: 03Ch</i> */
-	volatile uint32_t guid;
-	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
-	volatile uint32_t gsnpsid;
-	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
-	volatile uint32_t ghwcfg1;
-	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
-	volatile uint32_t ghwcfg2;
-#define DWC_SLAVE_ONLY_ARCH 0
-#define DWC_EXT_DMA_ARCH 1
-#define DWC_INT_DMA_ARCH 2
-
-#define DWC_MODE_HNP_SRP_CAPABLE	0
-#define DWC_MODE_SRP_ONLY_CAPABLE	1
-#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
-#define DWC_MODE_SRP_CAPABLE_DEVICE		3
-#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
-#define DWC_MODE_SRP_CAPABLE_HOST	5
-#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
-
-	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
-	volatile uint32_t ghwcfg3;
-	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
-	volatile uint32_t ghwcfg4;
-	/** Reserved  <i>Offset: 054h-0FFh</i> */
-	volatile uint32_t reserved[43];
-	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
-	volatile uint32_t hptxfsiz;
-	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
-		otherwise Device Transmit FIFO#n Register.
-	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
-	volatile uint32_t dptxfsiz_dieptxf[15];
-} dwc_otg_core_global_regs_t;
-
-/**
- * This union represents the bit fields of the Core OTG Control
- * and Status Register (GOTGCTL).  Set the bits using the bit
- * fields then write the <i>d32</i> value to the register.
- */
-typedef union gotgctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned sesreqscs : 1;
-		unsigned sesreq : 1;
-		unsigned reserved2_7 : 6;
-		unsigned hstnegscs : 1;
-		unsigned hnpreq : 1;
-		unsigned hstsethnpen : 1;
-		unsigned devhnpen : 1;
-		unsigned reserved12_15 : 4;
-		unsigned conidsts : 1;
-		unsigned reserved17 : 1;
-		unsigned asesvld : 1;
-		unsigned bsesvld : 1;
-		unsigned currmod : 1;
-		unsigned reserved21_31 : 11;
-	} b;
-} gotgctl_data_t;
-
-/**
- * This union represents the bit fields of the Core OTG Interrupt Register
- * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
- * value to the register.
- */
-typedef union gotgint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Current Mode */
-		unsigned reserved0_1 : 2;
-
-		/** Session End Detected */
-		unsigned sesenddet : 1;
-
-		unsigned reserved3_7 : 5;
-
-		/** Session Request Success Status Change */
-		unsigned sesreqsucstschng : 1;
-		/** Host Negotiation Success Status Change */
-		unsigned hstnegsucstschng : 1;
-
-		unsigned reserver10_16 : 7;
-
-		/** Host Negotiation Detected */
-		unsigned hstnegdet : 1;
-		/** A-Device Timeout Change */
-		unsigned adevtoutchng : 1;
-		/** Debounce Done */
-		unsigned debdone : 1;
-
-		unsigned reserved31_20 : 12;
-
-	} b;
-} gotgint_data_t;
-
-
-/**
- * This union represents the bit fields of the Core AHB Configuration
- * Register (GAHBCFG).	Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gahbcfg_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned glblintrmsk : 1;
-#define DWC_GAHBCFG_GLBINT_ENABLE		1
-
-		unsigned hburstlen : 4;
-#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
-
-		unsigned dmaenable : 1;
-#define DWC_GAHBCFG_DMAENABLE			1
-		unsigned reserved : 1;
-		unsigned nptxfemplvl_txfemplvl : 1;
-		unsigned ptxfemplvl : 1;
-#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
-#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
-		unsigned reserved9_31 : 23;
-	} b;
-} gahbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core USB Configuration
- * Register (GUSBCFG).	Set the bits using the bit fields then write
- * the <i>d32</i> value to the register.
- */
-typedef union gusbcfg_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned toutcal : 3;
-		unsigned phyif : 1;
-		unsigned ulpi_utmi_sel : 1;
-		unsigned fsintf : 1;
-		unsigned physel : 1;
-		unsigned ddrsel : 1;
-		unsigned srpcap : 1;
-		unsigned hnpcap : 1;
-		unsigned usbtrdtim : 4;
-		unsigned nptxfrwnden : 1;
-		unsigned phylpwrclksel : 1;
-		unsigned otgutmifssel : 1;
-		unsigned ulpi_fsls : 1;
-		unsigned ulpi_auto_res : 1;
-		unsigned ulpi_clk_sus_m : 1;
-		unsigned ulpi_ext_vbus_drv : 1;
-		unsigned ulpi_int_vbus_indicator : 1;
-		unsigned term_sel_dl_pulse : 1;
-		unsigned reserved23_27 : 5;
-		unsigned tx_end_delay : 1;
-		unsigned reserved29_31 : 3;
-	} b;
-} gusbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core Reset Register
- * (GRSTCTL).  Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union grstctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Core Soft Reset (CSftRst) (Device and Host)
-		 *
-		 * The application can flush the control logic in the
-		 * entire core using this bit. This bit resets the
-		 * pipelines in the AHB Clock domain as well as the
-		 * PHY Clock domain.
-		 *
-		 * The state machines are reset to an IDLE state, the
-		 * control bits in the CSRs are cleared, all the
-		 * transmit FIFOs and the receive FIFO are flushed.
-		 *
-		 * The status mask bits that control the generation of
-		 * the interrupt, are cleared, to clear the
-		 * interrupt. The interrupt status bits are not
-		 * cleared, so the application can get the status of
-		 * any events that occurred in the core after it has
-		 * set this bit.
-		 *
-		 * Any transactions on the AHB are terminated as soon
-		 * as possible following the protocol. Any
-		 * transactions on the USB are terminated immediately.
-		 *
-		 * The configuration settings in the CSRs are
-		 * unchanged, so the software doesn't have to
-		 * reprogram these registers (Device
-		 * Configuration/Host Configuration/Core System
-		 * Configuration/Core PHY Configuration).
-		 *
-		 * The application can write to this bit, any time it
-		 * wants to reset the core. This is a self clearing
-		 * bit and the core clears this bit after all the
-		 * necessary logic is reset in the core, which may
-		 * take several clocks, depending on the current state
-		 * of the core.
-		 */
-		unsigned csftrst : 1;
-		/** Hclk Soft Reset
-		 *
-		 * The application uses this bit to reset the control logic in
-		 * the AHB clock domain. Only AHB clock domain pipelines are
-		 * reset.
-		 */
-		unsigned hsftrst : 1;
-		/** Host Frame Counter Reset (Host Only)<br>
-		 *
-		 * The application can reset the (micro)frame number
-		 * counter inside the core, using this bit. When the
-		 * (micro)frame counter is reset, the subsequent SOF
-		 * sent out by the core, will have a (micro)frame
-		 * number of 0.
-		 */
-		unsigned hstfrm : 1;
-		/** In Token Sequence Learning Queue Flush
-		 * (INTknQFlsh) (Device Only)
-		 */
-		unsigned intknqflsh : 1;
-		/** RxFIFO Flush (RxFFlsh) (Device and Host)
-		 *
-		 * The application can flush the entire Receive FIFO
-		 * using this bit.	<p>The application must first
-		 * ensure that the core is not in the middle of a
-		 * transaction.	 <p>The application should write into
-		 * this bit, only after making sure that neither the
-		 * DMA engine is reading from the RxFIFO nor the MAC
-		 * is writing the data in to the FIFO.	<p>The
-		 * application should wait until the bit is cleared
-		 * before performing any other operations. This bit
-		 * will takes 8 clocks (slowest of PHY or AHB clock)
-		 * to clear.
-		 */
-		unsigned rxfflsh : 1;
-		/** TxFIFO Flush (TxFFlsh) (Device and Host).
-		 *
-		 * This bit is used to selectively flush a single or
-		 * all transmit FIFOs.	The application must first
-		 * ensure that the core is not in the middle of a
-		 * transaction.	 <p>The application should write into
-		 * this bit, only after making sure that neither the
-		 * DMA engine is writing into the TxFIFO nor the MAC
-		 * is reading the data out of the FIFO.	 <p>The
-		 * application should wait until the core clears this
-		 * bit, before performing any operations. This bit
-		 * will takes 8 clocks (slowest of PHY or AHB clock)
-		 * to clear.
-		 */
-		unsigned txfflsh : 1;
-		/** TxFIFO Number (TxFNum) (Device and Host).
-		 *
-		 * This is the FIFO number which needs to be flushed,
-		 * using the TxFIFO Flush bit. This field should not
-		 * be changed until the TxFIFO Flush bit is cleared by
-		 * the core.
-		 *	 - 0x0 : Non Periodic TxFIFO Flush
-		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
-		 *	   or Periodic TxFIFO in host mode
-		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
-		 *	 - ...
-		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
-		 *	 - 0x10: Flush all the Transmit NonPeriodic and
-		 *	   Transmit Periodic FIFOs in the core
-		 */
-		unsigned txfnum : 5;
-		/** Reserved */
-		unsigned reserved11_29 : 19;
-		/** DMA Request Signal.	 Indicated DMA request is in
-		 * probress.  Used for debug purpose. */
-		unsigned dmareq : 1;
-		/** AHB Master Idle.  Indicates the AHB Master State
-		 * Machine is in IDLE condition. */
-		unsigned ahbidle : 1;
-	} b;
-} grstctl_t;
-
-
-/**
- * This union represents the bit fields of the Core Interrupt Mask
- * Register (GINTMSK).	Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gintmsk_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned reserved0 : 1;
-		unsigned modemismatch : 1;
-		unsigned otgintr : 1;
-		unsigned sofintr : 1;
-		unsigned rxstsqlvl : 1;
-		unsigned nptxfempty : 1;
-		unsigned ginnakeff : 1;
-		unsigned goutnakeff : 1;
-		unsigned reserved8 : 1;
-		unsigned i2cintr : 1;
-		unsigned erlysuspend : 1;
-		unsigned usbsuspend : 1;
-		unsigned usbreset : 1;
-		unsigned enumdone : 1;
-		unsigned isooutdrop : 1;
-		unsigned eopframe : 1;
-		unsigned reserved16 : 1;
-		unsigned epmismatch : 1;
-		unsigned inepintr : 1;
-		unsigned outepintr : 1;
-		unsigned incomplisoin : 1;
-		unsigned incomplisoout : 1;
-		unsigned reserved22_23 : 2;
-		unsigned portintr : 1;
-		unsigned hcintr : 1;
-		unsigned ptxfempty : 1;
-		unsigned reserved27 : 1;
-		unsigned conidstschng : 1;
-		unsigned disconnect : 1;
-		unsigned sessreqintr : 1;
-		unsigned wkupintr : 1;
-	} b;
-} gintmsk_data_t;
-/**
- * This union represents the bit fields of the Core Interrupt Register
- * (GINTSTS).  Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union gintsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-#define DWC_SOF_INTR_MASK 0x0008
-	/** register bits */
-	struct
-	{
-#define DWC_HOST_MODE 1
-		unsigned curmode : 1;
-		unsigned modemismatch : 1;
-		unsigned otgintr : 1;
-		unsigned sofintr : 1;
-		unsigned rxstsqlvl : 1;
-		unsigned nptxfempty : 1;
-		unsigned ginnakeff : 1;
-		unsigned goutnakeff : 1;
-		unsigned reserved8 : 1;
-		unsigned i2cintr : 1;
-		unsigned erlysuspend : 1;
-		unsigned usbsuspend : 1;
-		unsigned usbreset : 1;
-		unsigned enumdone : 1;
-		unsigned isooutdrop : 1;
-		unsigned eopframe : 1;
-		unsigned intokenrx : 1;
-		unsigned epmismatch : 1;
-		unsigned inepint: 1;
-		unsigned outepintr : 1;
-		unsigned incomplisoin : 1;
-		unsigned incomplisoout : 1;
-		unsigned reserved22_23 : 2;
-		unsigned portintr : 1;
-		unsigned hcintr : 1;
-		unsigned ptxfempty : 1;
-		unsigned reserved27 : 1;
-		unsigned conidstschng : 1;
-		unsigned disconnect : 1;
-		unsigned sessreqintr : 1;
-		unsigned wkupintr : 1;
-	} b;
-} gintsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union device_grxsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned epnum : 4;
-		unsigned bcnt : 11;
-		unsigned dpid : 2;
-#define DWC_STS_DATA_UPDT		0x2				  // OUT Data Packet
-#define DWC_STS_XFER_COMP		0x3				  // OUT Data Transfer Complete
-
-#define DWC_DSTS_GOUT_NAK		0x1				  // Global OUT NAK
-#define DWC_DSTS_SETUP_COMP		0x4				  // Setup Phase Complete
-#define DWC_DSTS_SETUP_UPDT 0x6				  // SETUP Packet
-		unsigned pktsts : 4;
-		unsigned fn : 4;
-		unsigned reserved : 7;
-	} b;
-} device_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union host_grxsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned chnum : 4;
-		unsigned bcnt : 11;
-		unsigned dpid : 2;
-		unsigned pktsts : 4;
-#define DWC_GRXSTS_PKTSTS_IN			  0x2
-#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
-#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
-		unsigned reserved : 11;
-	} b;
-} host_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
- * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
- * read out the bits using the <i>b</i>it elements.
- */
-typedef union fifosize_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned startaddr : 16;
-		unsigned depth : 16;
-	} b;
-} fifosize_data_t;
-
-/**
- * This union represents the bit fields in the Non-Periodic Transmit
- * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union gnptxsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned nptxfspcavail : 16;
-		unsigned nptxqspcavail : 8;
-		/** Top of the Non-Periodic Transmit Request Queue
-		 *	- bit 24 - Terminate (Last entry for the selected
-		 *	  channel/EP)
-		 *	- bits 26:25 - Token Type
-		 *	  - 2'b00 - IN/OUT
-		 *	  - 2'b01 - Zero Length OUT
-		 *	  - 2'b10 - PING/Complete Split
-		 *	  - 2'b11 - Channel Halt
-		 *	- bits 30:27 - Channel/EP Number
-		 */
-		unsigned nptxqtop_terminate : 1;
-		unsigned nptxqtop_token : 2;
-		unsigned nptxqtop_chnep : 4;
-		unsigned reserved : 1;
-	} b;
-} gnptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Transmit
- * FIFO Status Register (DTXFSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union dtxfsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned txfspcavail : 16;
-		unsigned reserved : 16;
-	} b;
-} dtxfsts_data_t;
-
-/**
- * This union represents the bit fields in the I2C Control Register
- * (I2CCTL). Read the register into the <i>d32</i> element then read out the
- * bits using the <i>b</i>it elements.
- */
-typedef union gi2cctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned rwdata : 8;
-		unsigned regaddr : 8;
-		unsigned addr : 7;
-		unsigned i2cen : 1;
-		unsigned ack : 1;
-		unsigned i2csuspctl : 1;
-		unsigned i2cdevaddr : 2;
-		unsigned reserved : 2;
-		unsigned rw : 1;
-		unsigned bsydne : 1;
-	} b;
-} gi2cctl_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config1
- * Register.  Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg1_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned ep_dir0 : 2;
-		unsigned ep_dir1 : 2;
-		unsigned ep_dir2 : 2;
-		unsigned ep_dir3 : 2;
-		unsigned ep_dir4 : 2;
-		unsigned ep_dir5 : 2;
-		unsigned ep_dir6 : 2;
-		unsigned ep_dir7 : 2;
-		unsigned ep_dir8 : 2;
-		unsigned ep_dir9 : 2;
-		unsigned ep_dir10 : 2;
-		unsigned ep_dir11 : 2;
-		unsigned ep_dir12 : 2;
-		unsigned ep_dir13 : 2;
-		unsigned ep_dir14 : 2;
-		unsigned ep_dir15 : 2;
-	} b;
-} hwcfg1_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config2
- * Register.  Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg2_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/* GHWCFG2 */
-		unsigned op_mode : 3;
-#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-
-		unsigned architecture : 2;
-		unsigned point2point : 1;
-		unsigned hs_phy_type : 2;
-#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-
-		unsigned fs_phy_type : 2;
-		unsigned num_dev_ep : 4;
-		unsigned num_host_chan : 4;
-		unsigned perio_ep_supported : 1;
-		unsigned dynamic_fifo : 1;
-		unsigned multi_proc_int : 1;
-		unsigned reserved21 : 1;
-		unsigned nonperio_tx_q_depth : 2;
-		unsigned host_perio_tx_q_depth : 2;
-		unsigned dev_token_q_depth : 5;
-		unsigned reserved31 : 1;
-	} b;
-} hwcfg2_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config3
- * Register.  Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg3_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/* GHWCFG3 */
-		unsigned xfer_size_cntr_width : 4;
-		unsigned packet_size_cntr_width : 3;
-		unsigned otg_func : 1;
-		unsigned i2c : 1;
-		unsigned vendor_ctrl_if : 1;
-		unsigned optional_features : 1;
-		unsigned synch_reset_type : 1;
-		unsigned ahb_phy_clock_synch : 1;
-		unsigned reserved15_13 : 3;
-		unsigned dfifo_depth : 16;
-	} b;
-} hwcfg3_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config4
- * Register.  Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg4_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned num_dev_perio_in_ep : 4;
-		unsigned power_optimiz : 1;
-		unsigned min_ahb_freq : 9;
-		unsigned utmi_phy_data_width : 2;
-		unsigned num_dev_mode_ctrl_ep : 4;
-		unsigned iddig_filt_en : 1;
-		unsigned vbus_valid_filt_en : 1;
-		unsigned a_valid_filt_en : 1;
-		unsigned b_valid_filt_en : 1;
-		unsigned session_end_filt_en : 1;
-		unsigned ded_fifo_en : 1;
-		unsigned num_in_eps : 4;
-		unsigned desc_dma : 1;
-		unsigned desc_dma_dyn : 1;
-	} b;
-} hwcfg4_data_t;
-
-////////////////////////////////////////////
-// Device Registers
-/**
- * Device Global Registers. <i>Offsets 800h-BFFh</i>
- *
- * The following structures define the size and relative field offsets
- * for the Device Mode Registers.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_global_regs
-{
-	/** Device Configuration Register. <i>Offset 800h</i> */
-	volatile uint32_t dcfg;
-	/** Device Control Register. <i>Offset: 804h</i> */
-	volatile uint32_t dctl;
-	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
-	volatile uint32_t dsts;
-	/** Reserved. <i>Offset: 80Ch</i> */
-	uint32_t unused;
-	/** Device IN Endpoint Common Interrupt Mask
-	 * Register. <i>Offset: 810h</i> */
-	volatile uint32_t diepmsk;
-	/** Device OUT Endpoint Common Interrupt Mask
-	 * Register. <i>Offset: 814h</i> */
-	volatile uint32_t doepmsk;
-	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
-	volatile uint32_t daint;
-	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
-	 * 81Ch</i> */
-	volatile uint32_t daintmsk;
-	/** Device IN Token Queue Read Register-1 (Read Only).
-	 * <i>Offset: 820h</i> */
-	volatile uint32_t dtknqr1;
-	/** Device IN Token Queue Read Register-2 (Read Only).
-	 * <i>Offset: 824h</i> */
-	volatile uint32_t dtknqr2;
-	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
-	volatile uint32_t dvbusdis;
-	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
-	volatile uint32_t dvbuspulse;
-	/** Device IN Token Queue Read Register-3 (Read Only). /
-	 *	Device Thresholding control register (Read/Write)
-	 * <i>Offset: 830h</i> */
-	volatile uint32_t dtknqr3_dthrctl;
-	/** Device IN Token Queue Read Register-4 (Read Only). /
-	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
-	 * <i>Offset: 834h</i> */
-	volatile uint32_t dtknqr4_fifoemptymsk;
-	/** Device Each Endpoint Interrupt Register (Read Only). /
-	 * <i>Offset: 838h</i> */
-	volatile uint32_t deachint;
-	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
-	 * <i>Offset: 83Ch</i> */
-	volatile uint32_t deachintmsk;
-	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
-	 * <i>Offset: 840h</i> */
-	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
-	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
-	 * <i>Offset: 880h</i> */
-	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
-} dwc_otg_device_global_regs_t;
-
-/**
- * This union represents the bit fields in the Device Configuration
- * Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.  Write the
- * <i>d32</i> member to the dcfg register.
- */
-typedef union dcfg_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Device Speed */
-		unsigned devspd : 2;
-		/** Non Zero Length Status OUT Handshake */
-		unsigned nzstsouthshk : 1;
-#define DWC_DCFG_SEND_STALL 1
-
-		unsigned reserved3 : 1;
-		/** Device Addresses */
-		unsigned devaddr : 7;
-		/** Periodic Frame Interval */
-		unsigned perfrint : 2;
-#define DWC_DCFG_FRAME_INTERVAL_80 0
-#define DWC_DCFG_FRAME_INTERVAL_85 1
-#define DWC_DCFG_FRAME_INTERVAL_90 2
-#define DWC_DCFG_FRAME_INTERVAL_95 3
-
-		unsigned reserved13_17 : 5;
-		/** In Endpoint Mis-match count */
-		unsigned epmscnt : 5;
-		/** Enable Descriptor DMA in Device mode */
-		unsigned descdma : 1;
-	} b;
-} dcfg_data_t;
-
-/**
- * This union represents the bit fields in the Device Control
- * Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Remote Wakeup */
-		unsigned rmtwkupsig : 1;
-		/** Soft Disconnect */
-		unsigned sftdiscon : 1;
-		/** Global Non-Periodic IN NAK Status */
-		unsigned gnpinnaksts : 1;
-		/** Global OUT NAK Status */
-		unsigned goutnaksts : 1;
-		/** Test Control */
-		unsigned tstctl : 3;
-		/** Set Global Non-Periodic IN NAK */
-		unsigned sgnpinnak : 1;
-		/** Clear Global Non-Periodic IN NAK */
-		unsigned cgnpinnak : 1;
-		/** Set Global OUT NAK */
-		unsigned sgoutnak : 1;
-		/** Clear Global OUT NAK */
-		unsigned cgoutnak : 1;
-
-		/** Power-On Programming Done */
-		unsigned pwronprgdone : 1;
-		/** Global Continue on BNA */
-		unsigned gcontbna : 1;
-		/** Global Multi Count */
-		unsigned gmc : 2;
-		/** Ignore Frame Number for ISOC EPs */
-		unsigned ifrmnum : 1;
-		/** NAK on Babble */
-		unsigned nakonbble : 1;
-
-		unsigned reserved16_31 : 16;
-	} b;
-} dctl_data_t;
-
-/**
- * This union represents the bit fields in the Device Status
- * Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Suspend Status */
-		unsigned suspsts : 1;
-		/** Enumerated Speed */
-		unsigned enumspd : 2;
-#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
-#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
-		/** Erratic Error */
-		unsigned errticerr : 1;
-		unsigned reserved4_7: 4;
-		/** Frame or Microframe Number of the received SOF */
-		unsigned soffn : 14;
-		unsigned reserved22_31 : 10;
-	} b;
-} dsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device IN EP Interrupt
- * Register and the Device IN EP Common Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- *	 bits using the <i>b</i>it elements.
- */
-typedef union diepint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Transfer complete mask */
-		unsigned xfercompl : 1;
-		/** Endpoint disable mask */
-		unsigned epdisabled : 1;
-		/** AHB Error mask */
-		unsigned ahberr : 1;
-		/** TimeOUT Handshake mask (non-ISOC EPs) */
-		unsigned timeout : 1;
-		/** IN Token received with TxF Empty mask */
-		unsigned intktxfemp : 1;
-		/** IN Token Received with EP mismatch mask */
-		unsigned intknepmis : 1;
-		/** IN Endpoint HAK Effective mask */
-		unsigned inepnakeff : 1;
-		/** IN Endpoint HAK Effective mask */
-		unsigned emptyintr : 1;
-		unsigned txfifoundrn : 1;
-
-		/** BNA Interrupt mask */
-		unsigned bna : 1;
-		unsigned reserved10_12 : 3;
-		/** BNA Interrupt mask */
-		unsigned nak : 1;
-		unsigned reserved14_31 : 18;
-		} b;
-} diepint_data_t;
-
-/**
- * This union represents the bit fields in the Device IN EP
- * Common/Dedicated Interrupt Mask Register.
- */
-typedef union diepint_data diepmsk_data_t;
-
-/**
- * This union represents the bit fields in the Device OUT EP Interrupt
- * Registerand Device OUT EP Common Interrupt Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- *	 bits using the <i>b</i>it elements.
- */
-typedef union doepint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Transfer complete */
-		unsigned xfercompl : 1;
-		/** Endpoint disable  */
-		unsigned epdisabled : 1;
-		/** AHB Error */
-		unsigned ahberr : 1;
-		/** Setup Phase Done (contorl EPs) */
-		unsigned setup : 1;
-		/** OUT Token Received when Endpoint Disabled */
-		unsigned outtknepdis : 1;
-		unsigned stsphsercvd : 1;
-		/** Back-to-Back SETUP Packets Received */
-		unsigned back2backsetup : 1;
-		unsigned reserved7 : 1;
-		/** OUT packet Error */
-		unsigned outpkterr : 1;
-		/** BNA Interrupt */
-		unsigned bna : 1;
-		unsigned reserved10 : 1;
-		/** Packet Drop Status */
-		unsigned pktdrpsts : 1;
-		/** Babble Interrupt */
-		unsigned babble : 1;
-		/** NAK Interrupt */
-		unsigned nak : 1;
-		/** NYET Interrupt */
-		unsigned nyet : 1;
-
-		unsigned reserved15_31 : 17;
-	} b;
-} doepint_data_t;
-
-/**
- * This union represents the bit fields in the Device OUT EP
- * Common/Dedicated Interrupt Mask Register.
- */
-typedef union doepint_data doepmsk_data_t;
-
-/**
- * This union represents the bit fields in the Device All EP Interrupt
- * and Mask Registers.
- * - Read the register into the <i>d32</i> member then set/clear the
- *	 bits using the <i>b</i>it elements.
- */
-typedef union daint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** IN Endpoint bits */
-		unsigned in : 16;
-		/** OUT Endpoint bits */
-		unsigned out : 16;
-	} ep;
-	struct
-	{
-		/** IN Endpoint bits */
-		unsigned inep0	: 1;
-		unsigned inep1	: 1;
-		unsigned inep2	: 1;
-		unsigned inep3	: 1;
-		unsigned inep4	: 1;
-		unsigned inep5	: 1;
-		unsigned inep6	: 1;
-		unsigned inep7	: 1;
-		unsigned inep8	: 1;
-		unsigned inep9	: 1;
-		unsigned inep10 : 1;
-		unsigned inep11 : 1;
-		unsigned inep12 : 1;
-		unsigned inep13 : 1;
-		unsigned inep14 : 1;
-		unsigned inep15 : 1;
-		/** OUT Endpoint bits */
-		unsigned outep0	 : 1;
-		unsigned outep1	 : 1;
-		unsigned outep2	 : 1;
-		unsigned outep3	 : 1;
-		unsigned outep4	 : 1;
-		unsigned outep5	 : 1;
-		unsigned outep6	 : 1;
-		unsigned outep7	 : 1;
-		unsigned outep8	 : 1;
-		unsigned outep9	 : 1;
-		unsigned outep10 : 1;
-		unsigned outep11 : 1;
-		unsigned outep12 : 1;
-		unsigned outep13 : 1;
-		unsigned outep14 : 1;
-		unsigned outep15 : 1;
-	} b;
-} daint_data_t;
-
-/**
- * This union represents the bit fields in the Device IN Token Queue
- * Read Registers.
- * - Read the register into the <i>d32</i> member.
- * - READ-ONLY Register
- */
-typedef union dtknq1_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** In Token Queue Write Pointer */
-		unsigned intknwptr : 5;
-		/** Reserved */
-		unsigned reserved05_06 : 2;
-		/** write pointer has wrapped. */
-		unsigned wrap_bit : 1;
-		/** EP Numbers of IN Tokens 0 ... 4 */
-		unsigned epnums0_5 : 24;
-	}b;
-} dtknq1_data_t;
-
-/**
- * This union represents Threshold control Register
- * - Read and write the register into the <i>d32</i> member.
- * - READ-WRITABLE Register
- */
-typedef union dthrctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** non ISO Tx Thr. Enable */
-		unsigned non_iso_thr_en : 1;
-		/** ISO Tx Thr. Enable */
-		unsigned iso_thr_en : 1;
-		/** Tx Thr. Length */
-		unsigned tx_thr_len : 9;
-		/** Reserved */
-		unsigned reserved11_15 : 5;
-		/** Rx Thr. Enable */
-		unsigned rx_thr_en : 1;
-		/** Rx Thr. Length */
-		unsigned rx_thr_len : 9;
-		/** Reserved */
-		unsigned reserved26_31 : 6;
-	}b;
-} dthrctl_data_t;
-
-
-/**
- * Device Logical IN Endpoint-Specific Registers. <i>Offsets
- * 900h-AFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_in_ep_regs
-{
-	/** Device IN Endpoint Control Register. <i>Offset:900h +
-	 * (ep_num * 20h) + 00h</i> */
-	volatile uint32_t diepctl;
-	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
-	uint32_t reserved04;
-	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
-	 * (ep_num * 20h) + 08h</i> */
-	volatile uint32_t diepint;
-	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
-	uint32_t reserved0C;
-	/** Device IN Endpoint Transfer Size
-	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
-	volatile uint32_t dieptsiz;
-	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
-	 * (ep_num * 20h) + 14h</i> */
-	volatile uint32_t diepdma;
-	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
-	 * (ep_num * 20h) + 18h</i> */
-	volatile uint32_t dtxfsts;
-	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
-	 * (ep_num * 20h) + 1Ch</i> */
-	volatile uint32_t diepdmab;
-} dwc_otg_dev_in_ep_regs_t;
-
-/**
- * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
- * B00h-CFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_out_ep_regs
-{
-	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
-	 * (ep_num * 20h) + 00h</i> */
-	volatile uint32_t doepctl;
-	/** Device OUT Endpoint Frame number Register.	<i>Offset:
-	 * B00h + (ep_num * 20h) + 04h</i> */
-	volatile uint32_t doepfn;
-	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
-	 * (ep_num * 20h) + 08h</i> */
-	volatile uint32_t doepint;
-	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
-	uint32_t reserved0C;
-	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
-	 * B00h + (ep_num * 20h) + 10h</i> */
-	volatile uint32_t doeptsiz;
-	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
-	 * + (ep_num * 20h) + 14h</i> */
-	volatile uint32_t doepdma;
-	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 1Ch</i> */
-	uint32_t unused;
-	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
-	 * + (ep_num * 20h) + 1Ch</i> */
-	uint32_t doepdmab;
-} dwc_otg_dev_out_ep_regs_t;
-
-/**
- * This union represents the bit fields in the Device EP Control
- * Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union depctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Maximum Packet Size
-		 * IN/OUT EPn
-		 * IN/OUT EP0 - 2 bits
-		 *	 2'b00: 64 Bytes
-		 *	 2'b01: 32
-		 *	 2'b10: 16
-		 *	 2'b11: 8 */
-		unsigned mps : 11;
-#define DWC_DEP0CTL_MPS_64	 0
-#define DWC_DEP0CTL_MPS_32	 1
-#define DWC_DEP0CTL_MPS_16	 2
-#define DWC_DEP0CTL_MPS_8	 3
-
-		/** Next Endpoint
-		 * IN EPn/IN EP0
-		 * OUT EPn/OUT EP0 - reserved */
-		unsigned nextep : 4;
-
-		/** USB Active Endpoint */
-		unsigned usbactep : 1;
-
-		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
-		 * This field contains the PID of the packet going to
-		 * be received or transmitted on this endpoint. The
-		 * application should program the PID of the first
-		 * packet going to be received or transmitted on this
-		 * endpoint , after the endpoint is
-		 * activated. Application use the SetD1PID and
-		 * SetD0PID fields of this register to program either
-		 * D0 or D1 PID.
-		 *
-		 * The encoding for this field is
-		 *	 - 0: D0
-		 *	 - 1: D1
-		 */
-		unsigned dpid : 1;
-
-		/** NAK Status */
-		unsigned naksts : 1;
-
-		/** Endpoint Type
-		 *	2'b00: Control
-		 *	2'b01: Isochronous
-		 *	2'b10: Bulk
-		 *	2'b11: Interrupt */
-		unsigned eptype : 2;
-
-		/** Snoop Mode
-		 * OUT EPn/OUT EP0
-		 * IN EPn/IN EP0 - reserved */
-		unsigned snp : 1;
-
-		/** Stall Handshake */
-		unsigned stall : 1;
-
-		/** Tx Fifo Number
-		 * IN EPn/IN EP0
-		 * OUT EPn/OUT EP0 - reserved */
-		unsigned txfnum : 4;
-
-		/** Clear NAK */
-		unsigned cnak : 1;
-		/** Set NAK */
-		unsigned snak : 1;
-		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
-		 * Writing to this field sets the Endpoint DPID (DPID)
-		 * field in this register to DATA0. Set Even
-		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
-		 * Writing to this field sets the Even/Odd
-		 * (micro)frame (EO_FrNum) field to even (micro)
-		 * frame.
-		 */
-		unsigned setd0pid : 1;
-		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
-		 * Writing to this field sets the Endpoint DPID (DPID)
-		 * field in this register to DATA1 Set Odd
-		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
-		 * Writing to this field sets the Even/Odd
-		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
-		 */
-		unsigned setd1pid : 1;
-		/** Endpoint Disable */
-		unsigned epdis : 1;
-		/** Endpoint Enable */
-		unsigned epena : 1;
-		} b;
-} depctl_data_t;
-
-/**
- * This union represents the bit fields in the Device EP Transfer
- * Size Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz_data
-{
-		/** raw register data */
-		uint32_t d32;
-		/** register bits */
-		struct {
-		/** Transfer size */
-		unsigned xfersize : 19;
-		/** Packet Count */
-		unsigned pktcnt : 10;
-		/** Multi Count - Periodic IN endpoints */
-		unsigned mc : 2;
-		unsigned reserved : 1;
-		} b;
-} deptsiz_data_t;
-
-/**
- * This union represents the bit fields in the Device EP 0 Transfer
- * Size Register.  Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz0_data
-{
-		/** raw register data */
-		uint32_t d32;
-		/** register bits */
-		struct {
-		/** Transfer size */
-		unsigned xfersize : 7;
-				/** Reserved */
-				unsigned reserved7_18 : 12;
-		/** Packet Count */
-		unsigned pktcnt : 1;
-				/** Reserved */
-		unsigned reserved20_28 : 9;
-				/**Setup Packet Count (DOEPTSIZ0 Only) */
-				unsigned supcnt : 2;
-				unsigned reserved31;
-		} b;
-} deptsiz0_data_t;
-
-
-/////////////////////////////////////////////////
-// DMA Descriptor Specific Structures
-//
-
-/** Buffer status definitions */
-
-#define BS_HOST_READY	0x0
-#define BS_DMA_BUSY		0x1
-#define BS_DMA_DONE		0x2
-#define BS_HOST_BUSY	0x3
-
-/** Receive/Transmit status definitions */
-
-#define RTS_SUCCESS		0x0
-#define RTS_BUFFLUSH	0x1
-#define RTS_RESERVED	0x2
-#define RTS_BUFERR		0x3
-
-
-/**
- * This union represents the bit fields in the DMA Descriptor
- * status quadlet. Read the quadlet into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
- * <i>b_iso_in</i> elements.
- */
-typedef union desc_sts_data
-{
-		/** raw register data */
-		uint32_t d32;
-		/** quadlet bits */
-		struct {
-		/** Received number of bytes */
-		unsigned bytes : 16;
-
-		unsigned reserved16_22 : 7;
-		/** Multiple Transfer - only for OUT EPs */
-		unsigned mtrf : 1;
-		/** Setup Packet received - only for OUT EPs */
-		unsigned sr : 1;
-		/** Interrupt On Complete */
-		unsigned ioc : 1;
-		/** Short Packet */
-		unsigned sp : 1;
-		/** Last */
-		unsigned l : 1;
-		/** Receive Status */
-		unsigned sts : 2;
-		/** Buffer Status */
-		unsigned bs : 2;
-		} b;
-
-#ifdef DWC_EN_ISOC
-		/** iso out quadlet bits */
-		struct {
-		/** Received number of bytes */
-		unsigned rxbytes : 11;
-
-		unsigned reserved11 : 1;
-		/** Frame Number */
-		unsigned framenum : 11;
-		/** Received ISO Data PID */
-		unsigned pid : 2;
-		/** Interrupt On Complete */
-		unsigned ioc : 1;
-		/** Short Packet */
-		unsigned sp : 1;
-		/** Last */
-		unsigned l : 1;
-		/** Receive Status */
-		unsigned rxsts : 2;
-		/** Buffer Status */
-		unsigned bs : 2;
-		} b_iso_out;
-
-		/** iso in quadlet bits */
-		struct {
-		/** Transmited number of bytes */
-		unsigned txbytes : 12;
-		/** Frame Number */
-		unsigned framenum : 11;
-		/** Transmited ISO Data PID */
-		unsigned pid : 2;
-		/** Interrupt On Complete */
-		unsigned ioc : 1;
-		/** Short Packet */
-		unsigned sp : 1;
-		/** Last */
-		unsigned l : 1;
-		/** Transmit Status */
-		unsigned txsts : 2;
-		/** Buffer Status */
-		unsigned bs : 2;
-		} b_iso_in;
-#endif //DWC_EN_ISOC
-} desc_sts_data_t;
-
-/**
- * DMA Descriptor structure
- *
- * DMA Descriptor structure contains two quadlets:
- * Status quadlet and Data buffer pointer.
- */
-typedef struct dwc_otg_dma_desc
-{
-	/** DMA Descriptor status quadlet */
-	desc_sts_data_t	status;
-	/** DMA Descriptor data buffer pointer */
- 	dma_addr_t	buf;
-} dwc_otg_dma_desc_t;
-
-/**
- * The dwc_otg_dev_if structure contains information needed to manage
- * the DWC_otg controller acting in device mode. It represents the
- * programming view of the device-specific aspects of the controller.
- */
-typedef struct dwc_otg_dev_if
-{
-	/** Pointer to device Global registers.
-	 * Device Global Registers starting at offset 800h
-	 */
-	dwc_otg_device_global_regs_t *dev_global_regs;
-#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-
-	/**
-	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
-	 */
-	dwc_otg_dev_in_ep_regs_t	 *in_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-#define DWC_EP_REG_OFFSET 0x20
-
-	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-	dwc_otg_dev_out_ep_regs_t	 *out_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-
-	/* Device configuration information*/
-	uint8_t	 speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
-	uint8_t	 num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
-	uint8_t	 num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
-
-	/** Size of periodic FIFOs (Bytes) */
-	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-
-	/** Size of Tx FIFOs (Bytes) */
-	uint16_t tx_fifo_size[MAX_TX_FIFOS];
-
-	/** Thresholding enable flags and length varaiables **/
-	uint16_t rx_thr_en;
-	uint16_t iso_tx_thr_en;
-	uint16_t non_iso_tx_thr_en;
-
-	uint16_t rx_thr_length;
-	uint16_t tx_thr_length;
-
-	/**
-	 * Pointers to the DMA Descriptors for EP0 Control
-	 * transfers (virtual and physical)
-	 */
-	/** 2 descriptors for SETUP packets */
-	uint32_t dma_setup_desc_addr[2];
-	dwc_otg_dma_desc_t* setup_desc_addr[2];
-
-	/** Pointer to Descriptor with latest SETUP packet */
-	dwc_otg_dma_desc_t* psetup;
-
-	/** Index of current SETUP handler descriptor */
-	uint32_t setup_desc_index;
-
-	/** Descriptor for Data In or Status In phases */
-	uint32_t dma_in_desc_addr;
-	dwc_otg_dma_desc_t* in_desc_addr;;
-
-	/** Descriptor for Data Out or Status Out phases */
-	uint32_t dma_out_desc_addr;
-	dwc_otg_dma_desc_t* out_desc_addr;
-} dwc_otg_dev_if_t;
-
-
-
-
-/////////////////////////////////////////////////
-// Host Mode Register Structures
-//
-/**
- * The Host Global Registers structure defines the size and relative
- * field offsets for the Host Mode Global Registers.  Host Global
- * Registers offsets 400h-7FFh.
-*/
-typedef struct dwc_otg_host_global_regs
-{
-	/** Host Configuration Register.   <i>Offset: 400h</i> */
-	volatile uint32_t hcfg;
-	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
-	volatile uint32_t hfir;
-	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
-	volatile uint32_t hfnum;
-	/** Reserved.	<i>Offset: 40Ch</i> */
-	uint32_t reserved40C;
-	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
-	volatile uint32_t hptxsts;
-	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
-	volatile uint32_t haint;
-	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
-	volatile uint32_t haintmsk;
-} dwc_otg_host_global_regs_t;
-
-/**
- * This union represents the bit fields in the Host Configuration Register.
- * Read the register into the <i>d32</i> member then set/clear the bits using
- * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
- */
-typedef union hcfg_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		/** FS/LS Phy Clock Select */
-		unsigned fslspclksel : 2;
-#define DWC_HCFG_30_60_MHZ 0
-#define DWC_HCFG_48_MHZ	   1
-#define DWC_HCFG_6_MHZ	   2
-
-		/** FS/LS Only Support */
-		unsigned fslssupp : 1;
-		} b;
-} hcfg_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfir_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		unsigned frint : 16;
-		unsigned reserved : 16;
-	} b;
-} hfir_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfnum_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		unsigned frnum : 16;
-#define DWC_HFNUM_MAX_FRNUM 0x3FFF
-		unsigned frrem : 16;
-	} b;
-} hfnum_data_t;
-
-typedef union hptxsts_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		unsigned ptxfspcavail : 16;
-		unsigned ptxqspcavail : 8;
-		/** Top of the Periodic Transmit Request Queue
-		 *	- bit 24 - Terminate (last entry for the selected channel)
-		 *	- bits 26:25 - Token Type
-		 *	  - 2'b00 - Zero length
-		 *	  - 2'b01 - Ping
-		 *	  - 2'b10 - Disable
-		 *	- bits 30:27 - Channel Number
-		 *	- bit 31 - Odd/even microframe
-		 */
-		unsigned ptxqtop_terminate : 1;
-		unsigned ptxqtop_token : 2;
-		unsigned ptxqtop_chnum : 4;
-		unsigned ptxqtop_odd : 1;
-	} b;
-} hptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Port Control and Status
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hprt0 register.
- */
-typedef union hprt0_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned prtconnsts : 1;
-		unsigned prtconndet : 1;
-		unsigned prtena : 1;
-		unsigned prtenchng : 1;
-		unsigned prtovrcurract : 1;
-		unsigned prtovrcurrchng : 1;
-		unsigned prtres : 1;
-		unsigned prtsusp : 1;
-		unsigned prtrst : 1;
-		unsigned reserved9 : 1;
-		unsigned prtlnsts : 2;
-		unsigned prtpwr : 1;
-		unsigned prttstctl : 4;
-		unsigned prtspd : 2;
-#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
-		unsigned reserved19_31 : 13;
-	} b;
-} hprt0_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned ch0 : 1;
-		unsigned ch1 : 1;
-		unsigned ch2 : 1;
-		unsigned ch3 : 1;
-		unsigned ch4 : 1;
-		unsigned ch5 : 1;
-		unsigned ch6 : 1;
-		unsigned ch7 : 1;
-		unsigned ch8 : 1;
-		unsigned ch9 : 1;
-		unsigned ch10 : 1;
-		unsigned ch11 : 1;
-		unsigned ch12 : 1;
-		unsigned ch13 : 1;
-		unsigned ch14 : 1;
-		unsigned ch15 : 1;
-		unsigned reserved : 16;
-	} b;
-
-	struct
-	{
-		unsigned chint : 16;
-		unsigned reserved : 16;
-	} b2;
-} haint_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haintmsk_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		unsigned ch0 : 1;
-		unsigned ch1 : 1;
-		unsigned ch2 : 1;
-		unsigned ch3 : 1;
-		unsigned ch4 : 1;
-		unsigned ch5 : 1;
-		unsigned ch6 : 1;
-		unsigned ch7 : 1;
-		unsigned ch8 : 1;
-		unsigned ch9 : 1;
-		unsigned ch10 : 1;
-		unsigned ch11 : 1;
-		unsigned ch12 : 1;
-		unsigned ch13 : 1;
-		unsigned ch14 : 1;
-		unsigned ch15 : 1;
-		unsigned reserved : 16;
-	} b;
-
-	struct
-	{
-		unsigned chint : 16;
-		unsigned reserved : 16;
-	} b2;
-} haintmsk_data_t;
-
-/**
- * Host Channel Specific Registers. <i>500h-5FCh</i>
- */
-typedef struct dwc_otg_hc_regs
-{
-	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
-	volatile uint32_t hcchar;
-	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
-	volatile uint32_t hcsplt;
-	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
-	volatile uint32_t hcint;
-	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
-	volatile uint32_t hcintmsk;
-	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
-	volatile uint32_t hctsiz;
-	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
-	volatile uint32_t hcdma;
-	/** Reserved.  <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
-	uint32_t reserved[2];
-} dwc_otg_hc_regs_t;
-
-/**
- * This union represents the bit fields in the Host Channel Characteristics
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hcchar_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		/** Maximum packet size in bytes */
-		unsigned mps : 11;
-
-		/** Endpoint number */
-		unsigned epnum : 4;
-
-		/** 0: OUT, 1: IN */
-		unsigned epdir : 1;
-
-		unsigned reserved : 1;
-
-		/** 0: Full/high speed device, 1: Low speed device */
-		unsigned lspddev : 1;
-
-		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-		unsigned eptype : 2;
-
-		/** Packets per frame for periodic transfers. 0 is reserved. */
-		unsigned multicnt : 2;
-
-		/** Device address */
-		unsigned devaddr : 7;
-
-		/**
-		 * Frame to transmit periodic transaction.
-		 * 0: even, 1: odd
-		 */
-		unsigned oddfrm : 1;
-
-		/** Channel disable */
-		unsigned chdis : 1;
-
-		/** Channel enable */
-		unsigned chen : 1;
-	} b;
-} hcchar_data_t;
-
-typedef union hcsplt_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		/** Port Address */
-		unsigned prtaddr : 7;
-
-		/** Hub Address */
-		unsigned hubaddr : 7;
-
-		/** Transaction Position */
-		unsigned xactpos : 2;
-#define DWC_HCSPLIT_XACTPOS_MID 0
-#define DWC_HCSPLIT_XACTPOS_END 1
-#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-#define DWC_HCSPLIT_XACTPOS_ALL 3
-
-		/** Do Complete Split */
-		unsigned compsplt : 1;
-
-		/** Reserved */
-		unsigned reserved : 14;
-
-		/** Split Enble */
-		unsigned spltena : 1;
-	} b;
-} hcsplt_data_t;
-
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union hcint_data
-{
-	/** raw register data */
-	uint32_t d32;
-	/** register bits */
-	struct
-	{
-		/** Transfer Complete */
-		unsigned xfercomp : 1;
-		/** Channel Halted */
-		unsigned chhltd : 1;
-		/** AHB Error */
-		unsigned ahberr : 1;
-		/** STALL Response Received */
-		unsigned stall : 1;
-		/** NAK Response Received */
-		unsigned nak : 1;
-		/** ACK Response Received */
-		unsigned ack : 1;
-		/** NYET Response Received */
-		unsigned nyet : 1;
-		/** Transaction Err */
-		unsigned xacterr : 1;
-		/** Babble Error */
-		unsigned bblerr : 1;
-		/** Frame Overrun */
-		unsigned frmovrun : 1;
-		/** Data Toggle Error */
-		unsigned datatglerr : 1;
-		/** Reserved */
-		unsigned reserved : 21;
-	} b;
-} hcint_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Transfer Size
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hctsiz_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		/** Total transfer size in bytes */
-		unsigned xfersize : 19;
-
-		/** Data packets to transfer */
-		unsigned pktcnt : 10;
-
-		/**
-		 * Packet ID for next data packet
-		 * 0: DATA0
-		 * 1: DATA2
-		 * 2: DATA1
-		 * 3: MDATA (non-Control), SETUP (Control)
-		 */
-		unsigned pid : 2;
-#define DWC_HCTSIZ_DATA0 0
-#define DWC_HCTSIZ_DATA1 2
-#define DWC_HCTSIZ_DATA2 1
-#define DWC_HCTSIZ_MDATA 3
-#define DWC_HCTSIZ_SETUP 3
-
-		/** Do PING protocol when 1 */
-		unsigned dopng : 1;
-	} b;
-} hctsiz_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Interrupt Mask
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcintmsk register.
- */
-typedef union hcintmsk_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		unsigned xfercompl : 1;
-		unsigned chhltd : 1;
-		unsigned ahberr : 1;
-		unsigned stall : 1;
-		unsigned nak : 1;
-		unsigned ack : 1;
-		unsigned nyet : 1;
-		unsigned xacterr : 1;
-		unsigned bblerr : 1;
-		unsigned frmovrun : 1;
-		unsigned datatglerr : 1;
-		unsigned reserved : 21;
-	} b;
-} hcintmsk_data_t;
-
-/** OTG Host Interface Structure.
- *
- * The OTG Host Interface Structure structure contains information
- * needed to manage the DWC_otg controller acting in host mode. It
- * represents the programming view of the host-specific aspects of the
- * controller.
- */
-typedef struct dwc_otg_host_if
-{
-	/** Host Global Registers starting at offset 400h.*/
-	dwc_otg_host_global_regs_t *host_global_regs;
-#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-
-	/** Host Port 0 Control and Status Register */
-	volatile uint32_t *hprt0;
-#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-
-	/** Host Channel Specific Registers at offsets 500h-5FCh. */
-	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-
-
-	/* Host configuration information */
-	/** Number of Host Channels (range: 1-16) */
-	uint8_t	 num_host_channels;
-	/** Periodic EPs supported (0: no, 1: yes) */
-	uint8_t	 perio_eps_supported;
-	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
-	uint16_t perio_tx_fifo_size;
-} dwc_otg_host_if_t;
-
-
-/**
- * This union represents the bit fields in the Power and Clock Gating Control
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union pcgcctl_data
-{
-	/** raw register data */
-	uint32_t d32;
-
-	/** register bits */
-	struct
-	{
-		/** Stop Pclk */
-		unsigned stoppclk : 1;
-		/** Gate Hclk */
-		unsigned gatehclk : 1;
-		/** Power Clamp */
-		unsigned pwrclmp : 1;
-		/** Reset Power Down Modules */
-		unsigned rstpdwnmodule : 1;
-		/** PHY Suspended */
-		unsigned physuspended : 1;
-		unsigned reserved : 27;
-	} b;
-} pcgcctl_data_t;
-
-
-#endif
diff --git a/target/linux/cns3xxx/patches-3.14/300-laguna_support.patch b/target/linux/cns3xxx/patches-3.14/100-laguna_support.patch
index d2338e2..d2338e2 100644
--- a/target/linux/cns3xxx/patches-3.14/300-laguna_support.patch
+++ b/target/linux/cns3xxx/patches-3.14/100-laguna_support.patch
diff --git a/target/linux/cns3xxx/patches-3.14/305-laguna_sdhci_card_detect.patch b/target/linux/cns3xxx/patches-3.14/101-laguna_sdhci_card_detect.patch
index 2d28785..2d28785 100644
--- a/target/linux/cns3xxx/patches-3.14/305-laguna_sdhci_card_detect.patch
+++ b/target/linux/cns3xxx/patches-3.14/101-laguna_sdhci_card_detect.patch
diff --git a/target/linux/cns3xxx/patches-3.14/310-pci_isolated_interrupts.patch b/target/linux/cns3xxx/patches-3.14/110-pci_isolated_interrupts.patch
index 3e4cc67..3e4cc67 100644
--- a/target/linux/cns3xxx/patches-3.14/310-pci_isolated_interrupts.patch
+++ b/target/linux/cns3xxx/patches-3.14/110-pci_isolated_interrupts.patch
diff --git a/target/linux/cns3xxx/patches-3.14/400-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-3.14/200-broadcom_phy_reinit.patch
index bfec081..bfec081 100644
--- a/target/linux/cns3xxx/patches-3.14/400-broadcom_phy_reinit.patch
+++ b/target/linux/cns3xxx/patches-3.14/200-broadcom_phy_reinit.patch
diff --git a/target/linux/cns3xxx/patches-3.14/200-dwc_otg_support.patch b/target/linux/cns3xxx/patches-3.14/200-dwc_otg_support.patch
deleted file mode 100644
index 6b9243e..0000000
--- a/target/linux/cns3xxx/patches-3.14/200-dwc_otg_support.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -96,6 +96,8 @@ source "drivers/usb/host/Kconfig"
- 
- source "drivers/usb/renesas_usbhs/Kconfig"
- 
-+source "drivers/usb/dwc/Kconfig"
-+
- source "drivers/usb/class/Kconfig"
- 
- source "drivers/usb/storage/Kconfig"
---- a/drivers/usb/core/urb.c
-+++ b/drivers/usb/core/urb.c
-@@ -17,7 +17,11 @@ static void urb_destroy(struct kref *kre
- 
- 	if (urb->transfer_flags & URB_FREE_BUFFER)
- 		kfree(urb->transfer_buffer);
--
-+	if (urb->aligned_transfer_buffer) {
-+		kfree(urb->aligned_transfer_buffer);
-+		urb->aligned_transfer_buffer = 0;
-+		urb->aligned_transfer_dma = 0;
-+	}
- 	kfree(urb);
- }
- 
---- a/include/linux/usb.h
-+++ b/include/linux/usb.h
-@@ -1431,6 +1431,9 @@ struct urb {
- 	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
- 	void *transfer_buffer;		/* (in) associated data buffer */
- 	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
-+	void *aligned_transfer_buffer;	/* (in) associeated data buffer */
-+	dma_addr_t aligned_transfer_dma;/* (in) dma addr for transfer_buffer */
-+	u32 aligned_transfer_buffer_length; /* (in) data buffer length */
- 	struct scatterlist *sg;		/* (in) scatter gather buffer list */
- 	int num_mapped_sgs;		/* (internal) mapped sg entries */
- 	int num_sgs;			/* (in) number of entries in the sg list */
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_USB)		+= core/
- 
- obj-$(CONFIG_USB_DWC3)		+= dwc3/
- obj-$(CONFIG_USB_DWC2)		+= dwc2/
-+obj-$(CONFIG_USB_DWC_OTG)	+= dwc/
- 
- obj-$(CONFIG_USB_MON)		+= mon/
- 
diff --git a/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch
new file mode 100644
index 0000000..00081c4
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch
@@ -0,0 +1,47 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -75,6 +75,34 @@ static const struct dwc2_core_params par
+ 	.uframe_sched			= 0,
+ };
+ 
++static const struct dwc2_core_params params_cns3xxx = {
++	.otg_cap			= 2,	/* non-HNP/non-SRP capable */
++	.otg_ver			= 0,	/* 1.3 */
++	.dma_enable			= 1,
++	.dma_desc_enable		= 0,
++	.speed				= 0,	/* High Speed */
++	.enable_dynamic_fifo		= 1,
++	.en_multiple_tx_fifo		= 1,
++	.host_rx_fifo_size		= 658,	/* 774 DWORDs */
++	.host_nperio_tx_fifo_size	= 128,	/* 256 DWORDs */
++	.host_perio_tx_fifo_size	= 658,	/* 512 DWORDs */
++	.max_transfer_size		= 65535,
++	.max_packet_count		= 511,
++	.host_channels			= 16,
++	.phy_type			= 1,	/* UTMI */
++	.phy_utmi_width			= 16,	/* 8 bits */
++	.phy_ulpi_ddr			= 0,	/* Single */
++	.phy_ulpi_ext_vbus		= 0,
++	.i2c_enable			= 0,
++	.ulpi_fs_ls			= 0,
++	.host_support_fs_ls_low_power	= 0,
++	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
++	.ts_dline			= 0,
++	.reload_ctl			= 0,
++	.ahbcfg				= 0x10,
++	.uframe_sched			= 0,
++};
++
+ /**
+  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+  * DWC_otg driver
+@@ -134,6 +162,9 @@ static int dwc2_driver_probe(struct plat
+ 		/* Default all params to autodetect */
+ 		dwc2_set_all_params(&defparams, -1);
+ 		params = &defparams;
++#ifdef CONFIG_ARCH_CNS3XXX
++		params = &params_cns3xxx;
++#endif
+ 	}
+ 
+ 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);